Job Search Results

646 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 11:06PM Pacific Time by ContractJobHunter. )

Listings 1 - 646

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2566 - STRUCTURAL DESIGNER - cv, word doc only

Description:
Closely interface with technology, stress, systems, manufacturing, test groups and structural suppliers;

Produce change documentation;

Support directly other engineering and operations departments;

Support design and program reviews with partner/suppliers;

Produce status for project and assurance that engineering deliverables, meeting quality requirements, are provided as per schedule.

Have Bachelor Degree in Engineering mechanical/aerospace engineering plus a minimum of 10 years relevant experience in aerospace or related industry,

Possess a strong knowledge of aircraft structures and systems installation, configuration management principles, design for manufacturing, detail design (sheet metal, machined parts, piping, and component assembly), weight control, drafting procedures and standards, costs and schedule.

Have knowledge of CATIA/ENOVIA V5 and MS Office is required.

Are an energetic person with excellent communication and interpersonal skills that will allow the candidate to meet desired results in a high-pressure working environment.

Have a high sense of commitment, willingness to accept responsibilities and act independently and the ability to collaborate with partners and suppliers are assets.

Are fluent in French and English (written and spoken), an asset
 
Job Number: 2566
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C130 Flight Line Experience required powerplant licence - no clearance SC

Description:
APG Mechanic
Work Location: Greenville, SC
Status: Open

Qty: 2
Desired Start Date: 7/8/2019
End Date: 12/20/2019

Job Description:
Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company FAA Airframe and/or Powerplant License a Plus!

Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
Mission essential functions and other duties may be assigned as required.

Experience
Areas of Expertise C-130 No 1 2 - 4 Years
Soft Skills Troubleshooting No 1 2 - 4 Years
Technical Skills Diagnostic and Repair No 1 2 - 4 Years
 
Job Number: JE-1656-1
Job Location: Greenville, SC
Rate: 25-29/hr
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, stability and control, loads, and thermal analysis. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support current programs and extend our tools to conduct trade studies for new project initiatives.

Responsibilities:
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to P&HQ are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain aerodynamic databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Air Data Experience
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines for diverse engineering activities
• Ability to problem solve with a balance of technical product, cost, and schedule
• Determines technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative
• Maintains current knowledge of developments in the field of specialty and/or other related spacecraft innovations to improve quality and effectiveness of product



Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)



The Structures Company is an AA/EOE.
 
Job Number: 314
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer
Location: Lexington, KY
12+ month contract

ACTIVE SECRET CLEARANCE REQUIRED.

1-5 years of experience - entry level candidates will be considered

Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.


Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various
platforms based on customer specifications.

As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer
requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications :
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.
2 years of experience 

Desired skills :
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint).
Demonstrated previous success working in a team based environment to meet objectives.
MRB experience with Hangar support







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56743
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 04/29/2019
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program.
- This program is critical to the success of US service men and women deployed throughout the world.
- Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.
- The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.
- Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn.
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
- MATHCAD and MATLAB are also used for 'hand' calculations.
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Education :
- Level 2: BS+3-5 YRS or MS+0-3 YRS

Desired skills :
- Experience with a FEM creation using ANSYS, NASTRAN or similar program.
- Experience with Microsoft office suite (Word, Excel and PowerPoint).
- Demonstrated previous success working in a team based environment to meet objectives.
- MRB experience with Hangar support
 
Job Number: 10810
Job Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10718
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10716
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1459-1S5 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS


Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1459-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1458-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 4: BS+16 YRS or MS+14 YRS

Experience
Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1458-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / ANSYS FEMAP Finite Element Modeling (FEM) MATHCAD MATLAB - Clearance KY

Description:
1499-1 Aeronautical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 2
Desired Start Date: 4/15/2019
End Date: 4/15/2020

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).

MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications:
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.

Desired skills:
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint). Demonstrated previous success working in a team based environment to meet objectives. MRB experience with Hangar support

Typical Minimums:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $23.00 - $65.00 Hourly
 
Job Number: JE-1499-1S
Job Location: Lexington, KY
Rate: 65/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1461-1 Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Max Pay Rate: Open rate
Status: Open

Qty: 5
Desired Start Date: 4/15/2019
End Date: 4/14/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.


3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.


Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1461-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1463-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• The candidate may function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.


Level: Level 4: BS+16 YRS or MS+14 YRS


Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1463-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / 6 years’ experience with aircraft design, assembly, production or repair is required URGENT SC

Description:
164971

1650-1 Aeronautical Engineer
Work Location: Greenville, SC
Status: Open

Qty: 1
Desired Start Date: 6/17/2019
End Date: 12/20/2019

Job Description:
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Engineering candidate will be required to coordinate across many Greenville Operations Functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action. Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.

Candidate must value and support diversity.

Hourly Pay Rate locked in at $48
1st Shift- 6:30-4:00 (Possible OT)

Areas of Expertise F-16 No 1 6+ Years
Technical Skills Engineering Design Principles No 1 6+ Years
 
Job Number: JE-1650-1
Job Location: Greenville, SC
Rate: 48/hr max
Duration: 6 months CTH
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
Currently looking for an experienced Aerospace Engineer - Electrical Systems to fill an opening with a company located in Moses Lake, WA. Interested candidates should have aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).



Responsibilities of the Aerospace Engineer - Electrical Systems



Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Discuss, write and review test plans and preparation activities with the flight test team.
Help prepare and review pre and post-flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data. Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety of flight determination.


Requirements
Bachelor’s degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). Other Engineering fields may be considered.
Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills
Strong proficiency in writing summaries, documents, reports, and presentations.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks.
Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required.
Proven track record of improving the efficiency of assigned processes or procedures.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Stress Analyst Secret Cleared

Description:
*This is a 1 year or more contract position located in Lexington, KY*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicles and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*2 years’ experience in stress/structural analysis of aircraft using ANSYS/FEMAP for FEM

*Nastran experience
*Knowledge of hand analysis using MATHCAD/MATLAB

*MRB experience with Hangar support
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Lexington, KY
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Writer

Description:
Testing and Troubleshooting Writer

Location: Shelton, CT OR West Lafayette, IN OR Huntsville, AL

12+ month contract

Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring the troubleshooting section of maintenance manuals. This position is in support of contracted technical manual revision services and the creation of new publications. The writer’s duties would include researching, documenting, and authoring detailed testing and troubleshooting procedures to the governing specification. The writer will be required to interface with engineers on occasion over the content and review of the publications.



Technical Skills:

Experience with writing maintenance procedures from engineering documentation in the aerospace industry.
Familiar with the operation and maintenance of aircraft systems.
Able to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical manuals, military specifications, vendor data, and various forms of engineering data.
Possess strong analytical/editorial skills. Be able to review incorporated technical data and provide feedback.
Proficient with desktop publishing using content management software.
Experience with SGML/XML structured document authoring such as EpicEditor or equivalent.
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office.
Preferred, but not required:
Rotary aircraft experience
Avionics technician, or equivalent military experience in aircraft maintenance
Familiar with the use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software
Experience with specification S1000D
Personal Skills:

Detail-oriented
Process/analytical-oriented
Task/goal-oriented
Team-oriented
Quality-driven
Strong professional communication skills/ability to interact effectively with coworkers
Strong organizational/time management skills
Self motivated
Ability to work under pressure and meet deadlines
Manage multiple jobs with tight deadlines in fast-paced environment
Strong, customer-focused work ethic and positive attitude
Mentoring


Work Experience:

5 years technical writing experience


Areas of Responsibility:

Research, writing, and development of portions of aircraft maintenance manual revisions according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Conduct technical reviews of other writers’ work. Reviews and analyzes the technical information/documents that are incorporated into technical manuals
Provide frequent status
Meet internal and external delivery milestones


Education:

4 year college degree
Work Environment:

Office environment














____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57051
Job Location: CT, IN, or AL, CT, IN, or AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Safety Investigator(Active Secret Clearance)

Description:
The Test and Evaluation Flight Test Safety Engineering Team is seeking an Aviation Safety Official to perform operational and safety engineering tasks in support of Rapid Development Flight Test for unmanned and autonomous systems.
Responsibilities:
Collaborate within a cross section of program disciplines in a very dynamic, fast-paced development and test environment to promote mishap prevention.
Develop and manage safety requirements in a collaborative environment early in the design process through the life-cycle of the product/program, with specific emphasis on test operations
Perform critical safety engineering activities to support ground and flight test/launch preparation and operations, to include test hazard analyses, development of test procedures, and active participation in Ground/Flight Test Readiness Reviews
Perform safety risk management activities in a highly dynamic operational/test environment
Provide flight and ground test operations safety support during testing, to include active participation in pretest briefs/debriefs, after action reviews, and develop Pre-Mishap Plans and notification procedures
Evaluate customer/operational needs and requirements specifications to develop safety requirements, constraints, and operating limits
Review engineering design specifications, test operations, change proposals, deficiency reports, and deviation/waiver requests for potential flight test safety impacts
Conduct periodic safety survey audits and assessments
Lead/Participate in incident investigations and root cause/corrective action analyses
Lead/Facilitate aircraft impound investigations
Interface with customer and program subject matter experts
Prepare presentations, analyses, and reports for government/customer safety boards, program design reviews, and test/mission readiness reviews
Deliver oral and written presentations to peers, program management, senior leadership, customer, and regulatory agencies
 
Job Number: AirSaftey_MO
Job Location: Berkeley, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fabrication Technicians

Description:
STS Technical Services is currently hiring Fabrication Technicians in Broomfield, Colorado.

Job Duties:
Manufacture, paint, and/or sew aircraft interior components
Prepare aircraft interior components for paint or upholstery
Apply decorative paints, fabrics, and leather to interior panels and components
Accurately measure, cut, layout, and sew various materials including carpet
Install harnesses, lighting, and other controls onto finished interior components
Maintain proper work order tracking in support of aircraft interior completion
Make templates and patterns for manufacturing and sewing of interior components
Qualifications:
High school diploma or equivalent
3 years upholstery experience preferred
Experience with interior finishing in the aviation, automotive, and/or marine industries a plus
Proficiency sewing materials including leather
Experience applying various fabrics, leathers, and materials for upholstery work
Working knowledge in the operation of various hand tools utilized in the upholstery finishing industry
Ability to read and interpret blueprints and engineering drawings
Ability to lift and carry objects weighing up to 30 lbs
Strong attention to high quality, detailed work
Patience and willingness to perform repetitive routines
Basic computer skills, including familiarity with MS Office
What We Offer:
STS Technical Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 45431
Job Location: Broomfield, CO
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manager

Description:
Currently looking for an experienced Flight Test Team Manager to fill a role with a company in Moses Lake, WA. Interested candidates should have flight test management or engineering management experience.

Responsibilities of the Flight Test Team Manager:
Assign work, goals to the FTV team members.
Ensure test readiness, deliverables are on track.
Ensuring no injuries or accidents.
Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance).
Update and present short term schedule (90 days) to Functional Leads weekly.
Manage the entire FTV schedule through certification.
Provide daily and weekly FTV status.
Ensure support for short term schedule activities via Functional Leads.
Resolve issues with Functional Leads.
Setting aircraft configuration, schedule, testing and maintenance goals.
Implementing process improvements directly related to their FTV.




Requirements
Strong flight test experience.
Engineering management experience.
Aircraft configuration experience.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts/ Service Clerks

Description:
STS Technical Services is hiring Parts / Service Clerks in Las Vegas, Nevada.

Essential Duties & Responsibilities:
Perform data entry into Invoicing software and maintenance software as required, coordinate parts orders and assist in inventory control.
Follow up with customers on aging invoices.
Maintain accurate and complete filing systems for vendors and customers
Assist in daily invoicing of all completed work orders and parts sales
Accurately receive parts into Inventory software system
Coordinate parts orders
Maintain accurate inventory levels
Responsible for establishing and maintaining a file system
Assist in performing accurate and on time EOM close reports
Continue to receive ongoing training to gain knowledge of the industry
Provide managers updates on new business
Perform Data entry into customers maintenance programs as required
Process vendor invoices to corporate office
Make regular sales calls to increase parts sales
Coordinate daily service and parts transactions
Responsible to accurately invoice repair orders
Responsible to accurately receive parts into inventory
Coordinate requests from customers on Service and parts transactions
Communicate safety concerns with in the operation to management
Communicate customer requests for service to management
Maintain a clean and organized work environment
Qualifications:
High School Diploma
Valid Driver’s License
Good oral and written communication skills
PC literate, Strong word processing skills
Ability to prioritize and organize
Prior work experience in a mechanical work environment
Minimum 1-year experience in a service oriented office environment
Ability to attain Airport issued ID badge Notes from the hiring manager
Relevant experience with automotive parts and/or material handling.
The person we are looking for will need to have a strong back ground in those areas as well as computer skills – basic excel skills are required.
Company Overview & Benefits:
STS Technical Services offers hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-800-359-4787.
 
Job Number: 47780
Job Location: Las Vegas, NV
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Utility Technicians

Description:
STS Technical Services is Hiring Utility Technicians in Hunt Valley, Maryland.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
This position in provides support to our Manufacturing floor. The individual will mostly provide preparation support for Paint, but may also provide support in the Mechanical, Electrical or Air Vehicle Factory performing basic tasks, such as hand work, deburring, stenciling, Machine operation, cleaning, organizing, wiring and assembly.

Job Duties:
In support of our Paint Shop, the Utility Person will perform all surface preparation including body filling, glazing, sanding, cleaning, and masking surfaces
They will set up, adjust and operate automatic paint spraying equipment and drying ovens maintaining thickness or coating in conformance with specifications
The Utility Person may provide support to other areas of the shop floor
The support includes, assembling details and sub-assemblies, assisting experienced mechanics with operating equipment, material sizing and ply design layout of composite parts and bond assemblies, and set up and fabricate electronics assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools
The incumbent may also move material by hand, truck or conveyor within assigned storage area
Qualifications:
High School diploma and no related experience required
Paint or Body Shop experience is a plus
Ability to work with minimal supervision
Ability to work from verbal and written instructions
Ability to operate material handling equipment
Ability to work well independently and in a team environment
Strong attention to detail
Safety minded and able to work to requirements of a Quality management system
Basic PC skills/ knowledge
Ability to read and interpret blueprints and understand a parts list and multi-level assemblies is a plus
Working knowledge of abrasives, paint & finishing specifications is a plus
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 47902
Job Location: Hunt Valley, MD
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineers - Many Needed

Description:
*Must have a B.S. Elec.Engineering Degree
Aircraft avionics or electrical experience w/in last couple of years do not need mgmt experience, or electrical w/non-aircraft.
working wiring diagrams, harness assemblies w/recent experience in last 3-5 years.
Mentorgraphics preference, other CAD system Harnsys used in past so that is acceptable as well. Knowing and understanding system and able to be put on a schematic


Email resume to: mmccarthy@pdstech.com
 
Job Number: Avion-Tex
Job Location: Wichita, KS
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6-9 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineers - Many Needed

Description:
*Must have a B.S. Elec.Engineering Degree
Aircraft avionics or electrical experience w/in last couple of years do not need mgmt experience, or electrical w/non-aircraft.
working wiring diagrams, harness assemblies w/recent experience in last 3-5 years.
Mentorgraphics preference, other CAD system Harnsys used in past so that is acceptable as well. Knowing and understanding system and able to be put on a schematic


Email resume to: mmccarthy@pdstech.com
 
Job Number: Avion-Tex
Job Location: Wichita, KS
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6-9 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Strong technical skills aircraft Avionics/Electrical Systems
2. The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
3. Strong verbal and written communication skills.
4. Due to the nature of the work candidates must be US Citizen

Education:
1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. See Other Requirements in Job Description.
3. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
4. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Preferred Skills:
1. Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing
2. Familiarity with Airworthiness Authority regulations and showing compliance to such regulations
 
Job Number: 10662
Job Location: Savannah, GA
Rate: $58.00 -$63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronic Systems Engineer

Description:
Job Details
Special Missions - NON FAA - First shift is a 5 day work week, Overtime usually available.

Unique Skills
• Strong technical skills aircraft Avionics/Electrical Systems.
• The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
• Strong verbal and written communication skills.
• Due to the nature of the work candidates must be US Citizen.
• Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations.

Requirements
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-341
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer Associate

Description:
Buyer Associate needed in Trumbull, CT for a 15+ months contract opportunity!

Description:

The resource is an urgent need and the selected candidate should be prepared to begin as soon as all onboarding requirements are met.

The manager is willing to consider recent college graduates with the right skill set for this role.

Purpose:

Supports acquisition and sourcing of materials and resources required for the company for direct and/or indirect material including assisting with contracts (LTA) and order creation.

Role and Responsibilities:

Manage the procurement cycle from purchase order to payment of the invoice
Coordinate with production, completion and repair departments to set priorities and timelines
Negotiate pricing and contractual terms
Negotiate and manage lead times
Manage vendor relationships and performance issues
Control costs and perform price analysis
Maintain accuracy of purchasing documents and data
Be aware of and follow all applicable Federal Aviation Regulations, hazardous materials requirements, repair station requirements, FARS and DFARS, and Aircraft policies
Other tasks and duties as assigned by management
BS from an accredited college in a related discipline - Required
 
Job Number: 373227
Job Location: Trumbull, CT
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DLO Engineer - Simulator Systems Programmer

Description:
Our client is looking for an accountable DLO Engineer with 3 years of experience.

The ideal candidate for this position will perform the following tasks:
* Performs activities as required to accomplish objectives as established in the areas such as researching new systems in development, system modeling and integration.
* Recommends establishment of group objectives to improve operational efficiency and ensure Textron Aviation’s competitive edge.
* Design and development of software models to simulate various mechanical and electronic systems from the entire aircraft.
* Design and development of software and hardware solutions to integrate aircraft hardware – both mechanical and electronic – into the simulator environment.
* Responsible for requirements management, systems specifications, and interface management with both other engineering groups and with outside suppliers to maintain simulator configurations.
* Coordinate with other engineering groups and with outside suppliers to schedule and support simulator test activities.
* Develop and maintain effective two-way communications both internally and with other departments to assure adequate dissemination of information concerning plans and developments.
* Assures supervision awareness of program status, problems and successes.
* Provides periodic reviews and update presentations to management

Qualifications and Experience:
* Bachelor’s Degree required in Mechanical Engineering, Aerospace Engineering, Electrical Engineering or other relative technical field
* Minimum of 3 years of engineering experience or relative aviation technical or systems experience.
* Experience with C programming language
* Experience with Linux operating system
* Ability to read aircraft drawings for mechanical, avionics, and electrical systems
* Experience with Python programming language is desired
* Familiarity using Matlab/Simulink with basic control systems is desired.

The ideal candidate will possess the following skills and characteristics:
* Professional and diplomatic demeanor
* Strong sense of accountability and integrity
* Excellent verbal and written communication skills
* Time management skills to support multiple concurrent projects
* Proficient in use of standard Microsoft Office programs

Benefits: Visit http://www.teamglobal.com/benefits for more details.
 
Job Number: 130617
Job Location: Wichita, KS
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Gary Kidd
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer (primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: AP226771
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Active/Final Secret clearance with most recent investigation completed within the last 5-years. Preferred

Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
Proficient in the use of Geometric Dimensioning and Tolerancing.
Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
Significant CATIA-V4 experience.
Experience in structural analysis and proficient in material selection/sizing.
Experience in electro-mechanical/pneumatic/hydraulic systems design.
Experience working in a fast paced, developmental environment.
Experience writing technical reports and presenting technical data.
 
Job Number: 46847
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EBU Systems Engineer

Description:
EBU Systems Engineering supporting the design and development of commercial aircraft EBU system. This position will support the specification, design, analysis, fabrication, procurement and testing of commercial aircraft EBU systems.

• Must have experience with design, test and certification of EBU systems.
• Experience with Airbus aircraft preferred.
• Experience with system test requirements such as DO-160 preferred.
• Must have Requirements Management (DOORS) experience.
• BS degree in applicable engineering field preferred.

The Structures Company is an AA/EOE.
 
Job Number: 292
Job Location: OK
Rate: $75-$80/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Ice Protection Design Engineers

Description:
Required:
Engineering Degree Required
o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design
o Preferred: CATIA V6 and Enovia experience

Email resume to: mmccarthy@pdstech.com
 
Job Number: ECS=Tex-KS
Job Location: Wichita, KS
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Avionic Technician / 2 to 3 years’ of fighter aircraft electrical maintenance experience required - Clearance URGENT CA

Description:
164441
1657-1 Electrical/Avionic Technician
**2 to 3 years’ of fighter aircraft electrical maintenance experience required

Work Site Address: Edwards AFB, CA 93523
Max Pay Rate: $31.85/hr
Start Date: May 2019
End Date: 11 months
Position Type: Contract
2 openings

Job Summary:
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.

Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Candidate must have a minimum of 2 years’ experience in fighter aircraft electrical maintenance

Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.

F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)

In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
 
Job Number: JE-1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 11 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer:

AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Location: GA
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11061
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5and CHS preferred 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 19-144937
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11062
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 3

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-364
Job Location: Savannah, GA
Rate: $55 - $58/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: ESDE_Hazelwood
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

Description:
164950/1764
Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 17, 2019

Target End Date: Dec 20, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 12-20-19

3 Openings

Client is seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



Qualifications


Basic Qualifications:

Bachelor of Science degree in STEM discipline.

9 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
 
Job Number: JK-1764
Job Location: Melbourne, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical 4 / NX - Clearance FL

Description:
164948/1765
Engineer Mechanical 4 (Job Number: 19012383)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jul 15, 2019

Target End Date: Jul 10, 2020

Pay Rate: $60 to $66/hr (Based on experience)

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Under Supervisory direction, design and develop wiring harness/cable assembly installations into air vehicles for multiple aerospace programs using SAE AS 50881 and proven commercial practices as a guide.


This position will require inter-departmental coordination with other vehicle sub-system departments including aircraft structure, equipment installation, hydraulics, Environmental Control Systems, and manufacturing teams.


Basic Qualifications: Bachelor Degree plus 9 years of experience or High School Diploma plus 17 years of experience in lieu of a Bachelor Degree. Experience with NX 3D tool and 2D drawing creation based on 3D models


Preferred Qualifications: Experience with wiring routing in a 3D tool
 
Job Number: JK-1765S
Job Location: Melbourne, FL
Rate: 60-66/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry-Level Aircraft Equipment Repair Technicians ($500 Sign-On Bonus)

Description:
STS Technical Services is hiring Entry-Level Aircraft Equipment Repair Technicians in San Francisco, California.

Hiring Note: There is a $500 sign-on bonus attached to this job!

Job Summary:
This is a position for an assembly / repair technician working on Aviation Cargo Containers and Baggage Carts.

Job Duties:
Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
Comply with FAA and company policies and procedures
Ensure accurate and timely completion of work orders
Ability to perform routine and non-routine tasks independently
Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
Maintain safe and clean work environment
Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
Ensure system security of the electronic record-keeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
Provide feedback/suggestion to improve customer satisfaction
Perform any other duties as assigned by the Station Manager/Supervisor
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39353
Job Location: San Fransisco, CA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue & Damage Tolerance Engineers Needed

Description:
-Fatigue and Damage tolerance experience on primary and secondary airframe metallic structure required. MUST BE US Persons
•Strong background in classical stress analysis.
•Experience with Catia V5 to support stress analysis and drawing release.
•Experience with reviewing 2D drawings.
•Ability to work independently under limited supervision.
•Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
•Experience with Patran/Nastran is a plus.
•Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng exp

The Structures Company LLC is an AA/EOE.
 
Job Location: Savannah, GA
Rate: $75-80/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10399
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Fatigue and Damage Tolerance Engineer has experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.





Fatigue and Damage Tolerance Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Design Engineers

Description:
• Required: o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings o 14 CFR Part 23/25 aircraft flight Controls design experience, 5 years minimum o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.) o Aircraft mechanical system design o Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing o Preferred: CATIA V6 and Enovia experience

Email resume to: mmccarthy@pdstech.com
 
Job Number: Tex-Flight Control
Job Location: Wichita, KS
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post-flight data.
Make assessments to ensure the safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years of relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning, and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fluids / Airframe Design Engineer Catia W/Clearance

Description:
*This is a full time, 1 year contract located in Palmdale, CA*

*Per diem split is available for our of town contractors*



We are hiring for a contract fluids and airframe design engineer that will focus on flight fluid design routings, installation as well as a knowledge of other aircraft systems such as wire harness, system installation and structural design. Will validate and allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.



The contractor will work in a system engineering capacity with much of the work touching several areas of a large aerospace entity including production floor support from receipt of problem, coordination of answer to release of engineering change. Will design, develop, and test, including power plants, aircraft, missiles, and parts, with consideration of use of laws of flight. Will work on structural specifications, performs stress analysis, and performance tests.



Required:
*10 Years of aerospace airframe design, layouts and preliminary design using CATIA Version 5.0.
*Strong system engineering, requirements development, and supporting of the manufacturing floor
*Familiar with performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
*Active Secret Clearance (Special Access) with investigation within last 5 years.

*BSME or similar engineering degree



Pluses:
*Experience with Siemens FiberSim or Teamcenter
*Composite materials design experience
 
Job Number: 232
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineer

Description:
Location: Savannah, GA
Rate: $71.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

As a Contract Engineer in Flutter & Dynamic Loads, you will:
- Provide solutions for aircraft flutter and vibration problems
- Analyze aircraft structural dynamic response and develop load distributions for gust, landing and taxi conditions.
- Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
- Knowledge of aircraft aero elasticity principles and concepts
- Good general knowledge of FAR/EASA Part 25 requirements
- Experience in structural dynamics modeling
- Experience with MSC Nastran and Patran or a comparable application
- Experience with ground tests such as ground vibration tests or landing gear drop tests
- Experience with flutter flight testing
- Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
- Experience with aero servo elasticity is a plus

What the Loads & Dynamics team does:
- Creating and delivering a world class aviation experience
- Contributing to the certification of world class business jet aircraft

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 10461
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Foreign Object Debris/Damage (FOD) Specialist (Top secret (Yankee White) clearance)

Description:
Top secret (Yankee White) clearance required.

Seeking an experienced, customer focused, self-motivated individual to join the team as an FOD Specialist. The FOD Specialist will manage and direct a team of employees engaged in activities related to the management of tool cribs and tooling for manufacture and testing of aircraft. The Tool & FOD Control Manager will also develop, implement, and enforce FOD prevention programs for the site. This position requires a broad knowledge of company administration policies, procedures, practices and related manufacturing business concepts and their applications.

Job responsibilities include the following:
• Enforce and enhance company FOD and tool control processes and procedures at the FAFO site.
• Plan and direct tool crib activities necessary to meet the goals of the department and company in accordance with established quality and safety standards.
• Create a workplace environment where quality improvement tools are used effectively to achieve “world class “operations and enterprise excellence objectives.
• Ensure applicable product quality, aviation/product safety, and workplace health and safety requirements imposed by customers, government oversight agencies, and company executive management are met.
• Assess training requirements to ensure all direct reports receive appropriate training.

Basic Qualifications
• Bachelor’s degree or equivalent work experience
• 2+ years of prior experience in an aircraft maintenance, inventory control, or manufacturing operations environment.
• Strong team building skills, preferably leading hourly bargaining unit associates. Demonstrated ability to establish and maintain engaged and productive working relationships.
• Demonstrated ability to effectively prioritize and manage multiple tasks and responsibilities in a fast-paced environment. Must be a self-starter who is resourceful and takes initiative.
• Must possess strong interpersonal skills with the ability to effectively interface with all levels of the organization, suppliers, customers, and governmental oversight organizations.
• Demonstrated ability to effectively communicate orally, in writing and in group sessions as a member or leader.
• Must be customer focused and a team player.
• Must be enthusiastic with a positive outlook and possess a “can-do” work ethic.
• Must demonstrated experience identifying and implementing continuous improvement initiatives.
• Must possess general aviation knowledge.
• Ability to effectively utilize common business computer software such as MS Office and PowerPoint.

Desired Skills
• Previous experience managing flight line tool cribs, tool / FOD control programs
• Prior leadership experience
• Previous aircraft manufacturing and/or maintenance experience especially rotary-wing aircraft
 
Job Number: 1910102807
Job Location: Patuxent River, MD
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Design Engineer

Description:
The Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the HA-420 aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• This role will interface with the engineers within the department as well as other departments and organizations in the company during the development of the design package
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage


Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in an engineering related discipline
• Minimum of 3 years of previous design experience


Knowledge, Skills and Abilities:
• Proficient in Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards


The Structures Company is an AA/EOE.
 
Job Number: 298
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ice protection Design Engineer

Description:
Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents. Troubleshooting activities in both production and field environments.
Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
Required:
Engineering Degree Required
o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design
o Preferred: CATIA V6 and Enovia experience
 
Job Number: 1910101914
Job Location: Wichita, KS
Per Diem: Split
Overtime: Possible
Duration: 6-12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_70
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineers - Many Needed - HOT Level 3 & 4

Description:
*Must have BS Degree
Aircraft or Aerospace Background
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Ind
Job Location: St. Louis, MO
Rate: $52.00-$58.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

·Responsible for intelligent manufacturing information management and programing.

Qualifications & Experience

·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

·Familiar with R&D, production, management process in the aeronautical field;

·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

·Proficiently program the equipment control system of intelligent manufacturing;

·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

·Overseas working experience is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_69
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-365
Job Location: Savannah, GA
Rate: $55-$58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.

Unique Skills:
• Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope.
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities.
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge.
• Leads the development of innovative principles and ideas.
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements.
• Works under consultative direction; uses independent judgment to accomplish objectives.
• Develops standards and guides for diverse engineering activities.
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program.
 
Job Number: 24-361
Job Location: Savannah, GA
Rate: Up to $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis.
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 24-360
Job Location: Savannah, GA
Rate: $55/hr.
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Japan/ Outsourcing Manager

Description:
This individual should be able to develop robust strategies to provide the best outsourcing solutions that would contribute to the successful launch of the company and beyond.

Responsibilities:

• Provide thought leadership and problem solve challenges to improve Japan-based vendors and Group company`s performance and drive sustainable operations and deliver key business metrics for the company’s outsourcing program.
• Analyze data to identify solutions to complex challenges, drive business decisions and communicate them clearly to partners and stakeholders at all levels. Lead regular business reviews, identify gaps and engage with partners on improvement plans to streamline Japan-based outsourcing operations.
• Manage programs for Japan and Group company vendor expansion and drive medium to long term strategies and manage new project transitions and participate in workforce planning and budgeting activities in coordination with internal IPT teams and executive management.
• Manage vendor capacity through continuous engagement with vendor partners to assess active headcount, recruitment pipelines, and ongoing demand for resources from the lines of business, to ensure optimum resourcing at all times on site to support the aircraft program.
• Work closely with Outsourcing strategy manager, Contract Administration, Global outsourcing manager to develop and implement standard process and procedures to apply to the entire outsourcing activities for the company.
• Lead negotiation plan development including mapping out detailed approaches, fallback positions, and acceptable terms and conditions.

Qualifications:

• Minimum 15+ years of experience working with Aircraft or Automotive OEMs
• Minimum Bachelor`s degree, plus MBA, PMP or other certifications from accredited institutions preferred.
• 3 years of experience working with outsourcing matters with a focus on; direct vendor management, setting and driving vendor strategy, process improvement, contracting, commercial negotiations, in-house sourcing in Japan market.
• Experience managing global procurement responsibilities, using a strategic sourcing methodology, including opportunity analysis and identification, supplier selection, risk and compliance evaluation, contract negotiation, and financial analysis
• Ability to both develop strategic sourcing plans and dive deep in contract details with a solid understanding of how contracts are structured.
• Experience with supplier report cards and supplier management.
• Self-starter who can build sourcing/procurement credibility within groups not accustomed to working with procurement.
• Ability to read and speak English and Japanese fluently and possess Japanese and global business culture understanding.
• Ability to build relationships and manage multiple stakeholders simultaneously.
• Ability to find solutions, solve problems and manage multiple stakeholders globally.
• Ability to perform well and produce results under pressure in a fast changing environment
• Be comfortable and adaptable in the role depending on the level of engagement required.
• Ability to sustain high levels of performance in a constantly changing environment.
 
Job Location: Japan
Start Date: Now
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: NSR GROUP
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear and Hydraulic Systems Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-038
Job Location: Greensboro, NC
Rate: Up to $70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Tool Design Engineer

Description:
Seeking a first rate Lead Tooling Engineer with experience in tooling design and composite aircraft production. The primary task for this role will be to design Composite layup tooling for all programs as well as being the subject matter expert. This engineer will be able to evaluate factors such as tolerance, production rate, cure temperature, program schedule, CTE, and part quantity to determine the best options for tooling.

Your Mission:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)









The Structures Company is an AA/EOE.
 
Job Number: 313
Job Location: CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Description:
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews
Willingness to support weekend shift operations
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Is consulted extensively by associates and others as a recognized authority within the field
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
Has an approach to problem solving, balances technical product cost, and scheduling
Works without appreciable direction; work is reviewed from a long-range perspective for desired results
Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product


Qualifications:
Bachelor's Degree in engineering, Mechanical, Aerospace, or similar engineering discipline or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with a bachelors degree. Experience credit considered for related advanced degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required
Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.
 
Job Number: 309
Job Location: Mojave, CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB/Structures Design/Liaison Engineer

Description:
MRB Structures Design, Liaison, Production, Repairs
The follow skills are required:
1) Experience designing aircraft structure or aircraft structural repairs
2) Experience in post-production environment or as a production MRB engineer
3) Experience with Catia V5
4) The ability to effectively work with & support a team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.

The following unique skills are preferred:
1) Gulfstream experience on GV and G550
2) Experience in the repair of metal bonded structure
3) Experience in development of Structural Repair Manual (SRM) data.
4) Experience with foreign airworthiness regulatory agencies
5) Experience with repairs that impact Airworthiness Directives 6) Experience with Catia V4
7) Familiar with Static Stress analysis

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

The Structures Company LLC is an AA/EOE
 
Job Location: Savannah, GA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572 & S8752574
Job Location: Clearfield, UT
Rate: 50-60
Per Diem: no
Overtime: Yes
Duration: 12 month Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Must be willing to work 2nd shift if needed.
2. Aircraft interiors experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11017
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support.
2. Candidates must have experience with Catia V5.
3. Experience with Solumina and SAP is preferred.
4. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11005
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Process Engineer

Description:
know Tooling and jig and fixtures process for aircrafts
 
Job Number: 7
Job Location: Mid West
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 9+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Process Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience of working in a team environment to identify substantiating rationale for selecting materials and processes that become part of engineering models.
- Successful history of generating work authorizing instructions, test plans/reports and specifications.
- Ability to communicate with stakeholders and document accurate and timely project updates.
- Understand FAA regulations and certification processes.
- Special Missions - Highly prefer: KSA in Non-Metal Sealants and Coatings, Composites and Materials Processing.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10372
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-144927
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-144927
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Preferred skills:
- Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related advanced degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11072
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
- Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.


Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
- Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development


Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11032
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 10906
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Interiors

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.

Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


The Structures Company is AA/EOE.
 
Job Number: 316
Job Location: GA
Rate: $55-$68/Hr. **DOE**
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (UG NX)

Description:
RESPONSIBILITIES:
Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.
Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.
Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.
Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.

REQUIRED EXPERIENCE:
Must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory. A working knowledge of FEA and experience with TeamCenter PLM is preferred.

EDUCATION:
Accredited BS in Aerospace Engineering, Mechanical Engineering with 2-4 years. 0-2 years MS Degree in a related field or have 6 years relevant experience.

WORK HOURS:
8:00 - 5:00
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 179799/800
Job Location: Tulsa, OK
Rate: $45/hour
Per Diem: No
Overtime: Not specified
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance KY

Description:
1557-1 Mechanical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 3
Desired Start Date: 6/3/2019
End Date: 12/31/2019

Job Description:
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
• Experience with 3D parametric modeling and drafting in CATIA or similar tool
• Experience with Teamcenter or similar PDM/PLM software tool
• Demonstrated success working in a team-based environment to meet objectives
• Strong communication and presentation skills, both oral and written
• Experience with Microsoft office suite (Word, Excel, PowerPoint)
• BS in Mechanical Engineering from an accredited university
Comments for Suppliers: Desired skills:
• Familiarity with C-130 or other similar fixed wing or military aircraft
• Experience working in an aerospace environment with exposure to DoD customers
• Experience with ANSI/ASME Y14.100 or similar design and drafting standards
• Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
• Experience designing, or working with, sheet metal and machined components
• Experience with creation, review, and approval of engineering change documentation
• Experience with an engineering change process and/or configuration control process

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $22.00 - $63.00 Hourly
 
Job Number: JE-1557-1S
Job Location: Lexington, KY
Rate: 63/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*Two openings; both 9+ years’ experience in (1) electronics wire harness design and (1)Airframe structural design specialist using CATIA V5

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Ability to resolve problems and non conforming parts disposition, root cause analysis

*Per diem split is available for those travelling for this position

*Must have an Active Interim or Secret Clearance (and reinvestigated in last 5 years)

*Engineering Degree



Pluses:

*Experience designing using composites

*Siemens Fibersim experience
 
Job Number: 89
Job Location: Palmdale, CA
Duration: 1year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
MECHANICAL SYSTEMS ENGINEER

Location: Centennial, CO
Duration: 6 months


Main Responsibilities

In conjunction with system owners, perform the design, analysis, component selection, drawing creation, and integration of bell cranks, brackets, hinge elements, and secondary structure.

Perform drawing check, participate in peer reviews, preliminary design reviews, critical design reviews, mentor junior engineers in skills required for fluid system design and integration
Provide additional bandwidth creating technical drawing packages across the aircraft systems team
Qualifications

3-5+ years experience with fluid system design, analysis, fabrication, test, and integration
Knowledge of metallic component design, analysis, and manufacturing techniques
First principles understanding of stress, strain, material properties and material allowable
Experience with free body diagrams, identifying degrees of freedom and constraints, and synthesizing load cases on complex mechanical systems
Experience with rapid prototype methods and a demonstrated ability to bring conceptual designs to reality quickly
Expert in a major CAD package (NX, CATIA, Solidworks), proficient in drawing creation and geometric dimensioning and tolerancing (GD&T)
Capable designer of secondary structure, able to perform structural hand calculations, and simple finite element analysis of static loading conditions
Able to take practical descriptions of mechanisms and derive simplified load cases.
Experienced in design for manufacturing
Practiced with the selection and sourcing of aerospace components such as valves, filters, pumps, accumulators, instrumentation, clamps, etc
Works well in a team and has leadership experience
It would be awesome if you had:

Experience designing complex kinematic systems utilizing bellcranks and cam mechanisms to perform complex motions
Relevant aircraft system design experience, proficient in aircraft design standards outlined in AC 43.13






___________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56725
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Landing Gear

Description:
Seeking a Mechanical Systems Engineer with landing gear background

Must have experience with:
• Must have clean sheet design experience
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus
• Must have a BS degree (BSAE, BSME)

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: VA
Rate: $75-$85/Hr.
Per Diem: Yes
Duration: 3-6+ Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer

Description:
JSG is hiring a Design Engineer - NX for our client in Long Beach, CA!

Local Candidates preferred.

The primary focus will be on modeling and design of components for commercial aircraft and spacecraft. The ideal candidate will participate in regular meetings to coordinate design details with clients, designers, engineers, and management.

Job requirements:

Composite design experience is a huge PLUS
Siemens NX CAD experience required
Experience with design of composite parts and assemblies
Required including:
Laminates and sandwich structures
Bolted and bonded joints
Integration of composite parts into metallic components
ASME Y14.5 Dimensioning and Tolerancing
Excellent written and verbal communication skills
Demonstrated ability to work independently
Siemens Fibersim experience preferred
CATIA V5 experience preferred

Pay rate: DOE
3-6 months
Composite design experience
 
Job Number: 372825
Job Location: Long Beach, CA
Per Diem: If Qualified
Overtime: Possible
Duration: 3-6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant ECS & Cooling Systems Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Candidate should have experience with:
- Aircraft environmental control systems
- Specialized onboard equipment cooling systems, including: Liquid cooling systems, Air cycle systems, and Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification and certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10376
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Integrity & Quality Controls Engineer

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non-Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when the inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in the development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Company UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in the US as a permanent resident.

Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 372637
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Stress Analysis Engineer (Tulsa, OK)

Description:
• Contributes to planning, developing and coordinating of important engineering projects
• Must have some MRB experience in support of a/c structural repairs.
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area Additional Functions

UNIQUE SKILLS
• At least 10 years of detailed stress analysis experience on primary aircraft structures.
• Must have some experience in fatigue analysis on aircraft structure.
• Must have some MRB experience in support of a/c structural repairs
• Experience utilizing FEM. CATIA V5 experience is a plus.

EXPERIENCE/EDUCATION
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-304
Job Location: Tulsa, OK
Rate: $70-$79
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager - EBU Experience Needed

Description:
Must have experience with:
• Must have at least 5 years of experience as a Program Manager within the aircraft industry.
• EBU experience needed.
• Balancing and managing a program P&L.
• Delivery of system hardware to a customer.
• Managing the Test requirements, process, etc.
• Experience with certification of aircraft hardware.
• Managing EPM’s (project Managers).
• Experience presenting, communicating, traveling to, etc. with customers.
• Experience with all deliverables of an aircraft program.
• A BS degree is required.

BENEFITS:
Annual Bonus
Medical benefits
Relocation
401K

The Structures Company is an AA/EOE.
 
Job Number: 286
Job Location: OK
Rate: SALARY - ***DOE***
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Job Description:
Provides the Engineering leadership to a team representing the Cabin Systems In-flight Entertainment and Connectivity Engineering group, which may include internal and external resources and customers. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Focus on developing, implementing, integrating, and delivering customer introduction aircraft. Works closely with multiple cabin systems platform teams, cabin systems tech center, other systems teams as well as interiors teams. Supports configuration development, resolving cross-commodity design & interface issues, identifying & managing risks for the Customer Introductions and development projects, and serving as the Cabin Systems Integration Engineer to the program. Projects typically span numerous teams (within and beyond both Payloads and Systems) and require consideration of technical, business, and external factors. Works under minimal direction.

Education: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: PE2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - Aircraft Interiors (Stress)

Description:
Were are seeking a Project Engineer with aircraft interior experience to fill an opening for a company here in Renton, WA. Interested candidates should have 10 plus years of engineering experience in an assigned function and 5 plus years of program management experience.

Responsibilities of the Project Engineer
Act as the engineering integrator for the development, test and certification for the following systems: water and waste, oxygen, interior lighting, flight deck, cabin management, and power supply systems.
Develop and maintain schedules with proper resources allocation.
Manage weekly updates from Stress Team, reporting any delays, issues or milestones changes.
Develop the Interior Stress Team budget & resource plans within the schedule.
Manage and report any schedule conflicts to Stress Team Lead.
Identify and mitigate risk.
Escalate issues/problems/concerns immediately.
Improve tools and processes for improved effectiveness/continual improvement.


Requirements
Education: BSME, BSEE or BSAE.
10 plus years of engineering experience in an assigned function, including development programs in the domain.
5 plus Years previous experience in a Program Management team.
Strong knowledge of global certification requirements and compliance standards.
Significant experience resolving cross-functional engineering schedule issues.
Firm understanding of engineering program steps from beginning to completion.
 
Job Location: Renton, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager (VH-3D and VH-60N Model Aircraft)

Description:
This candidate will report to the ILSM and will be responsible for logistics projects with significant scope and complexity. Technical experience and knowledge of the VH-3D and VH-60N model aircraft is desirable.

Must possess the knowledge, skills, and abilities to work independently with minimum oversight.

Main responsibilities will include:
• the management of logistics proposal activities including the flow down of proposal requirements and the planning, execution, and delivery of high-quality logistics elements under contract.
• development and management of schedules and budgets for all logistics activities
• interaction with internal and external customers on a regular basis, including the development and presentation of logistics material at formal meetings.
 
Job Number: 1910099892
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 10 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - Aerospace

Description:
JSG is hiring a Project Manager for a 15+ months contract opportunity in Stratford, CT!

Job Duties:

This candidate will report to the ILSM and will be responsible for logistics projects with significant scope and complexity.
Technical experience and knowledge of the VH-3D and VH-60N model aircraft are desirable.
The candidate for this position must possess the knowledge, skills, and abilities to work independently with minimal oversight.
Main responsibilities will include the management of logistics proposal activities including the flow down of proposal requirements and the planning, execution, and delivery of high-quality logistics elements under contract.
Development and management of schedules and budgets for all logistics activities will be required.
The candidate will also interact with internal and external customers on a regular basis, including the development and presentation of logistics material at formal meetings.
 
Job Number: 372668
Job Location: Calabasas, CA
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS - Reliability, Maintainability, Safety

Description:
JSG is hiring an RMS (Reliability, Maintainability, Safety)Engineer for a 15+ months contract opportunity in Shelton, CT!

Description:

Interface with Logistics Support Analysts, NAVAIR Supportability and CH-53K Design IPTs & GSE Design Engineering to review LORA defined Intermediate and Depot Maintenance tasks to understand support equipment requirements; acceptance inspection, operational checkout, disassembly, cleaning, inspection, repair/replacement, assembly, and test.

Refer to the Company Aircraft Maintainability System SAMS Data Base to review Organizational, Intermediate, & Depot Maintenance Task Analysis for the various systems on components on the CH-53K.
Review Supplier SDRLs upon receipt to understand supplier recommendations for Intermediate & Depot maintenance support equipment requirements.
Review existing production tooling for Client manufactured components for application for Intermediate and Depot Level Maintenance tasks.
Working with NAVAIR Lakehurst & NAVAIR Supportability, determine if existing peculiar and common support equipment in NAVAIR/DOD Inventory can support CH-53K Organizational, Intermediate, & Depot Maintenance Tasks.
Prepare tracking files that identify support equipment that is required for each maintenance task for a system or component. The tracking files will track all peculiar & common support equipment identified.
Using the SAMs Data Base, prepare Peculiar Support Equipment CDRLs (SERDS Support Equipment Requirements Data) for Peculiar Support Equipment (PSE) required to support Organizational, Intermediate, & Depot Maintenance Requirements.
Create and manage lists to ensure proposal responses are accurate to approved maintenance plans.

PREFERRED EXPERIENCE:

A Federal Aviation Administration (FAA) Airframe/Powerplant certification is desired.
Demonstrated knowledge of various types of aviation-related ground support equipment is desired.
Naval Aviation Maintenance Program (NAMP) experience in a Depot/Overhaul Repair facility.
Strong Microsoft Excel and Word experience.
 
Job Number: 372638
Job Location: Shelton, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Requirements Engineer - Aircraft Display Systems - China.

Description:
Requirements Engineer - Aircraft Display Systems - China.

Our Client based in China require support working on their latest display systems.Their domain is Avionic Systems. The Display System level Safety Work will involve revising Requirements, and Architecture documentation to bring it into a certifiable level as well as other tasks and responsibilities.

Role:

The successful Engineer will deliver updated Architecture, Requirements and associated analysis, supporting the program towards certification. Windchill is used for document storage.

Experience & Qualifications:

Degree Qualified Engineer with good strong systems knowledge 10
years +. Good Requirements knowledge and/ or displays experience.

Candidates should be prepared to work in China for a period of at least 6 months. This position will be offered on a contract basis.

Please quote ref: BHJOB28358_68
 
Job Number: BHJOB28358_68
Job Location: China
Rate: Negotiable
Duration: 6 months
Start Date: 01/07/19
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Stress Engineer

Description:
Senior Stress Engineer

Colorado Springs, CO
$65/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

This position is for a Senior Stress Engineer that will support product development teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to engineering team based upon analysis results. Position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.


Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

*Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

*Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem solving skills
 
Job Number: 11024
Job Location: Colorado Springs, CO
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structural / Stress Engineer (MADYMO experience required)

Description:
This position will support Product Development Teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to the engineering team based upon analysis results. This position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.

Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer-term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem-solving skills
 
Job Number: 1910102563
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service Stress Engineer

Description:
• A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
• Experience as a stress analyst in post-production environment or a production Material Review Board (MRB) stress engineer
• Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
• The ability to effectively work with & support a multi-discipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
• Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
• Practical hands on aircraft experience and problem solving

Preferred Unique Skills:
• Gulfstream engineering experience, e.g. G650, G500, G600.
• Experience in fatigue analysis and damage tolerance analysis.
• Experience in the repair and analysis of composite structure
• Experience in repair and analysis of aircraft landing gear.
• Experience in development of Structural Repair Manual (SRM) data.
• Experience with foreign airworthiness regulatory agencies

Principal Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program
 
Job Number: 24-339
Job Location: Savannah, GA
Rate: $79/hr
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.


Principle Duties and Responsibilities:

Sr Technical Writer with minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Sr Technical Writer has extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Composite Structural Design Engineer

Description:
Seeking a Sr. Composite Structural Design Engineer to develop solutions to a variety of complex or unusual problems or assignments requiring independent judgment and ingenuity. Originates and/or modifies engineering protocols related to the design and development of aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or computer aided drawings and engineering reports.

Requirements:
• Must have 6-10 years of composite primary & secondary structural design experience.
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Must have experience with CATIA V5, SmarTeam, Composite Ply Definition, CPD or Fibersim
• Knowledge of ANSE Y14.5 dimensioning and tolerancing

The Structures Company is an AA/EOE.
 
Job Number: 315
Job Location: OK
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer 5 / NASTRAN, FEMAP CA

Description:
1758 Staff Structural Analysis Engineer 5 (Job Number: 19009696)

Number of Openings: 3

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Jun 19, 2020
Pay Rate: $82 to $84/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year
3 Openings

Seeking a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.



Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 12 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.



Preferred Qualifications:

• Experience working on military aircraft
 
Job Number: JK-1758
Job Location: El Segundo, CA
Rate: 84/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Location: Savannah, GA
Rate: $68.00 - $72.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Candidate will be performing structural analysis of company interior monuments using FEA and classical hand analysis.
2. Responsibilities will include both the analysis and certification documentation.

The ideal candidate will have experience in the following:
1. Experience performing structural analysis on aircraft Interior Furnishings
2. Use of finite element analysis for both primary and secondary structures
3. MRB experience for both Primary and Secondary Structures
4. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
5. A working knowledge of FAR part 25 certification requirements
6. A good understanding of a fast paced completion-style environment
7. Working knowledge of FEMAP is required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Additional Information
 
Job Number: 10837
Job Location: Savannah, GA
Rate: $68.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Aircraft Interiors

Description:
Candidate will be performing structural analysis of aircraft interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following:
- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast paced completion-style environment
- Working knowledge of FEMAP is required


Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

The Structures Company is AA/EOE.
 
Job Location: Savannah, GA
Rate: up to $72/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique skills:
• Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis.
• Responsibilities will include both the analysis and certification documentation.
• The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures
• Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
• A working knowledge of FAR part 25 certification requirements
• A good understanding of a fast paced completion-style environment
• Working knowledge of FEMAP is required

Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area


Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-356
Job Location: Savannah, GA
Rate: $68 to $75
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $77.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Stress Analyst, Service Engineering, TS II, GV Horiz Stab Support
The follow skills are required:
1. A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2. Experience as a stress analyst in post-production environment or a production MRB stress engineer
3. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4. The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6. Practical hands on aircraft engineering experience and problem solving
7. Experience with repairs that impact Airworthiness Directives

The following unique skills are preferred:
1. Gulfstream engineering experience on GV and G550
2. Experience in fatigue analysis and damage tolerance analysis.
3. Experience in the repair and analysis of metal bonded structure
4. Experience in development of Structural Repair Manual (SRM) data.
5. Experience with foreign airworthiness regulatory agencies
6. Experience designing aircraft structure or aircraft structural repairs
7. Experience with Catia V5 (3D modeling)

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10795
Job Location: Savannah, GA
Rate: $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $77.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Stress Analyst, Service Engineering, TS II, GV Horiz Stab Support
The follow skills are required:
1. A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2. Experience as a stress analyst in post-production environment or a production MRB stress engineer
3. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4. The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6. Practical hands on aircraft engineering experience and problem solving
7. Experience with repairs that impact Airworthiness Directives

The following unique skills are preferred:
1. Gulfstream engineering experience on GV and G550
2. Experience in fatigue analysis and damage tolerance analysis.
3. Experience in the repair and analysis of metal bonded structure
4. Experience in development of Structural Repair Manual (SRM) data.
5. Experience with foreign airworthiness regulatory agencies
6. Experience designing aircraft structure or aircraft structural repairs
7. Experience with Catia V5 (3D modeling)

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10796
Job Location: Savannah, GA
Rate: $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $82.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Stress Analyst, Service Engineering, TS III, GV Horiz Stab Support
The follow skills are required:
1. A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2. Experience as a stress analyst in post-production environment or a production MRB stress engineer
3. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4. The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6. Practical hands on aircraft engineering experience and problem solving
7. Experience with repairs that impact Airworthiness Directives

The following unique skills are preferred:
1. Gulfstream engineering experience on GV and G550
2. Experience in fatigue analysis and damage tolerance analysis.
3. Experience in the repair and analysis of metal bonded structure
4. Experience in development of Structural Repair Manual (SRM) data.
5. Experience with foreign airworthiness regulatory agencies
6. Experience designing aircraft structure or aircraft structural repairs
7. Experience with Catia V5 (3D modeling)

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 13 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10797
Job Location: Savannah, GA
Rate: $82.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience.
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Static analysis of composite structure
- Composite allowable testing and certification requirements.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. To be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10299
Job Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Seeking an Airframe Stress Engineer who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. This position will initially be located in our Reno, NV, headquarters and report directly to the Structures Manager.

Qualifications:
• Build and Lead team developing stress analysis methods and tools for AS2 aircraft design and certification.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Develop roadmap for structures team - in partnership with Tier 1 supplies and Partners – in the areas of analysis methods, tools and failure criterions for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity team.
• You must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.
 
Job Number: 42-012
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
• Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 24-313
Job Location: Savannah, GA
Rate: $74 - $80
Per Diem: YES
Overtime: YES
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services


Stress Engineer does Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience. • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Static analysis of composite structure • Composite allowable testing and certification requirements. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Principle Duties and Responsibilities:

Stress Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) is in specific technical discipline or ten (10) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers - Interior - Many Needed

Description:
Candidate will be performing structural analysis of interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following: - Experience performing structural analysis on aircraft Interior Furnishings - Use of finite element analysis for both primary and secondary structures - MRB experience for both Primary and Secondary Structures - Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations - A working knowledge of FAR part 25 certification requirements - A good understanding of a fast paced completion-style environment - Working knowledge of FEMAP is required

Email resume to: mmccarthy@pdstech.com
 
Job Number: Gulf - Stress - Interior
Job Location: Savannah, GA
Rate: $75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural / Stress Engineer

Description:
JSG is looking for Structural / Stress Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Supports performs and manages analysis, research, and development of structural engineering specification for ground test and qualification to include structures.
Experienced aircraft structural test engineer/stress analyst. Component design, analysis and test experience of dynamic and airframe components.
Understand the design process, test facilities, test conduct, review/correlation of data and reporting.
 
Job Number: 372639
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9178558

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9178558
12 Month Contract

Pay Rate: $70-80 /hr

** Active Secret Clearance Required

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies
The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub elements.
Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE, with last investigations within the last 4 1/2 years.
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function
• Minimum of 8 years of experience with Nastran or ABAQUS
• Static, dynamic and thermostructural analysis experience
• Test lab experience, including instrumentation and data reduction
• Knowledge of composite materials and manufacturing processes
• Excellent oral and written communication skills
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team
Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9178558
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Seeking an Aircraft Structural Design Lead who will be responsible for leading all structural design activities. This position will be located in Reno, NV and report directly to the Structures Manager.

Qualifications:
• Build and Lead all parts of Aircraft Structural Design organization
• Strong knowledge and understanding of latest structural design as well as manufacturing trends in the Aerospace industry
• Previous experience with Conceptual design is a must.
• Analyzes the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between company program, Tier 1 supplier and regulatory authorities
• Thorough understanding of the structural design requirements for Part 25 certification
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacturability and certification requirements
• Develop schedule, cost and supplier management milestones
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Client places a premium on problem-solving abilities and innovative thinking.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on the aircraft development program
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Must have demonstrated leadership capabilities
• Experienced in dealing with and influencing internal and external stakeholders
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets
 
Job Number: 42-011
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Position Purpose:
The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership. The group is involved with the current company fleet and new product development. This job is for placement in the Core team working on the Special Missions aircraft. Open to US citizens or permanent residents.

Unique Skills:
• Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
• Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
• Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
• Minimum 10,000 hours or 5 years of experience on CATIA v5 in primary Structural Design
• Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
• Proficiency in CATIA v4 and in SmarTeam PLM database
• Experience with green aircraft structural modification
• Prior work experience with company aircraft design
• Experience with knowledge management processes

Responsibilities include:
• Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
• Engage various engineering, manufacturing and product support teams to complete designs
• Participate in design reviews
• Interact with suppliers and prepare technical coordination memos
• Prepare engineering reports
• Document, track and manage design projects of various magnitude using online knowledge bases and tracking tools
• Provide technical leadership and mentoring to junior engineers

Experience/Education:
• Minimum of a Bachelors Degree in engineering (AE, CE, ME)
• Minimum of 5 years of experience on primary airframe structure
 
Job Number: 24-349
Job Location: Savannah, GA
Rate: $64
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWinHon
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Stress Analysis Engineers II, III, & IV- (WA)

Description:
***Several openings in the Seattle/Everett, WA areas***

Experience with aircraft structures, analytical skills, design/produce process, engineering analysis and/or design/test/certification regulations is essential. Work location is in various Puget Sound locations.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.

• Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
• Must be a U.S. Citizen
• Must have 9 or more years experience in structural or mechanical systems analysis or finite element analysis
• Significant experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems
 
Job Number: StressWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Design/Liaison Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The follow skills are required:
• Experience designing aircraft structure or aircraft structural repairs
• Experience in post-production environment or as a production MRB engineer
• Experience with Catia V5 (3D modelling)
• The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
• Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
• Practical hands-on aircraft experience and problem solving
The following unique skills are preferred:
• Gulfstream engineering experience on GV and G550
• Experience in the repair of metal bonded structure
• Experience in development of Structural Repair Manual (SRM) data.
• Experience with foreign airworthiness regulatory agencies
• Experience with repairs that impact Airworthiness Directives
• Experience with Catia V4 7) Familiar with Static Stress analysis

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-355
Job Location: Savannah, GA
Rate: $74-$79
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Design/Liaison Engineer

Description:
Location: Savannah, GA
Rate: $74.00 - $79.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Structures Design/Liaison Engineer, Service Eng, TSII, GV Horiz Stab Support
The follow skills are required:
1) Experience designing aircraft structure or aircraft structural repairs
2) Experience in post-production environment or as a production MRB engineer
3) Experience with Catia V5 (3D modeling)
4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6) Practical hands-on aircraft experience and problem solving

The following unique skills are preferred:
1) Gulfstream engineering experience on GV and G550
2) Experience in the repair of metal bonded structure
3) Experience in development of Structural Repair Manual (SRM) data.
4) Experience with foreign airworthiness regulatory agencies
5) Experience with repairs that impact Airworthiness Directives
6) Experience with Catia V4
7) Familiar with Static Stress analysis

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10800
Job Location: Savannah, GA
Rate: $74.00 - $79.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Design/Liaison Engineer

Description:
Location: Savannah, GA
Rate: $74.00 - $79.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Structures Design/Liaison Engineer, Service Eng, TSII, GV Horiz Stab Support
The follow skills are required:
1) Experience designing aircraft structure or aircraft structural repairs
2) Experience in post-production environment or as a production MRB engineer
3) Experience with Catia V5 (3D modeling)
4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6) Practical hands-on aircraft experience and problem solving

The following unique skills are preferred:
1) Gulfstream engineering experience on GV and G550
2) Experience in the repair of metal bonded structure
3) Experience in development of Structural Repair Manual (SRM) data.
4) Experience with foreign airworthiness regulatory agencies
5) Experience with repairs that impact Airworthiness Directives
6) Experience with Catia V4
7) Familiar with Static Stress analysis

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10801
Job Location: Savannah, GA
Rate: $74.00 - $79.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-352
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Required Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10742
Job Location: Savannah, GA
Rate: $65.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Structures MRB Engineer has minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel) - Typically a 40-hr. work week, with some week/weekend OT.
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with your last investigation being with 5 years****

Job Description:
- This position is for a Systems Design & Installation Engineer.
- A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of new and modified subsystem designs.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Technical engineering support for manufacturing, installation and testing at Lockheed Martin, external supplier facilities and the customer’s operating locations.
- The candidate may function in a project leadership role where they manage system performance, budget and schedule.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- 3-D CATIA experience required.
- Geometric Dimensioning and Tolerancing (GD&T) required.
- Systems Analysis & Design Skills preferred
- Stress Analysis experience preferred.
 
Job Number: 10721
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with your last investigation being with 5 years****

Job Description:
- This position is for a Systems Design & Installation Engineer.
- A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of new and modified subsystem designs.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Technical engineering support for manufacturing, installation and testing at Lockheed Martin, external supplier facilities and the customer’s operating locations.
- The candidate may function in a project leadership role where they manage system performance, budget and schedule.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- 3-D CATIA experience required.
- Geometric Dimensioning and Tolerancing (GD&T) required.
- Systems Analysis & Design Skills preferred
- Stress Analysis experience preferred.
 
Job Number: 10720
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
1475-1 Systems Engineer
Work Location: Palmdale, CA
Status: Open

Systems Engineer
Qty: 5
Desired Start Date: 4/15/2019
End Date: 10/31/2019

Job Description:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

The Skunk Works is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture. Must be a US Citizen; this position will require a government security clearance. This position is located at a facility that requires special access.

Bachelor's or above in a Technical Engineering Discipline

Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Analyst

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience in metallic door structures and mechanism analysis is highly desired.
- Experience in support of design and development of mechanical systems is desired
- 5 years minimum aircraft stress experience required.
- Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
- Strong background in classical stress analysis required.
- Experience with Catia V5 to support stress analysis and drawing release required.
- Experience with FEM analysis methods a plus but not required
- Experience in workflow review and approval process is a plus.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10550
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Engineer

Description:
• Experience in metallic door structures and mechanism analysis is highly desired.
• Experience in support of design and development of mechanical systems is desired
• 5 years minimum aircraft stress experience required.
• Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
• Strong background in classical stress analysis required.
• Experience with Catia V5 to support stress analysis and drawing release required.
• Experience with FEM analysis methods a plus but not required
• Experience in workflow review and approval process is a plus.

Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Experience/Education:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-330
Job Location: Savannah, GA
Rate: $75 - $80
Per Diem: Yes
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems/Software Avionics Test Engineer (FMS &Python Exp)

Description:
AVIONICS SOFTWARE TEST ENGINEER

Avionics Software Test Engineer with FMS experience. The position is a Software test level engineer with strong avionics background with at least 10 plus years of avionics experience.

Experience with the following is REQUIRED:

FMS experience
Python scripting
C++
DO-178B/C experience
Testing of high level requirements experience
DOORS
Lateral and Vertical Guidance experience a plus.
Here is a list of key skills that we want for our FAA SW qualification efforts:



Knowledgeable on DOORS and interpreting High level and Low level Software requirements
Knowledgeable on DO-178C and qualification of SW for FAA commercial programs
At least working level knowledge on Python programming for the purposes of testing Aircraft electronic equipment
Knowledge on Flight Management Systems, such as Navigation, Guidance and Flight Plan functions
Ability to write both Test Cases derived from SW requirements and Test Procedures derived from the Test Cases
Experience with Structural Code coverage analysis and testing

Must have excellent communications skills, writing skills and able to interface with engineers and management.
 
Job Number: WW060619LBB
Job Location: Long Beach, CA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9-12 months
Start Date: Immediately
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tech Spec II - Equipment and Furnishings

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired.
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-343
Job Location: Savannah, GA
Rate: $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Publications Engineer

Description:
1. Responsible for completing complex engineering research, development and certification requirements for authoring/
illustrating new and sustaining model technical publications.
2. Extensive technical expertise, highly proficient in research and authoring tools utilized to accomplish tasks, with a full
knowledge and understanding of other related disciplines within technical publications.
3. Demonstrated understanding of industry standards and government regulatory requirements affecting the development
and distribution of technical publications.
4. Performs quality control reviews for accuracy and consistency throughout the document development and completion
process to ensure all data conforms to established specifications and regulatory requirements.
5. Subject matter expert and technical advisor tasked with providing assistance, guidance and training to other team
members.
6. Performs a variety of complex tasks. Leads special projects.
7. A wide degree of creativity and latitude expected in day-to-day tasks.
QUALIFICATIONS:
· An understanding of engineering data, with an ability to research and analyze engineering drawings and technical
documents.
· Mechanical aptitude with experience and knowledge of aircraft operation, aircraft systems, aircraft maintenance
practices and aircraft manufacturing.
· Familiar with FAA Regulations and Aviation Industry (iSpec 2200, S1000D, MilSpecs, etc.) specifications and
guidelines.
· Experience using SGML/HTML/XML and/or Arbortext Editor preferred.
· Professional and diplomatic demeanor with excellent verbal and written communication skills.
EDUCATION/ EXPERIENCE:
· Bachelor’s degree in Engineering, Aviation, or related field.
· 7+ years’ experience in technical or related field required.
· A&P and/or Pilot’s license a plus.
 
Job Number: 1910101887
Job Location: Wichita, KS
Per Diem: Split
Overtime: Possible
Duration: 6 - 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer & Ilustrator

Description:
General Summary:
The Technical Writer will work independently and as part of a team to author a set of airplane technical manuals (AFM, AMM, CMM, IPC, WDM, SRM) from engineering, manufacturing, flight, and supplier data. The writer shall be able to research within Engineering drawing structure to find all necessary supporting documents.

Duties and Responsibilities:
1. Research technical information to develop technical documents.
2. Ability to develop airplane illustrated parts catalog from engineering drawings, blueprints, manufacturing, flight, bills of material, and supplier data; using the industry system of indenture.
3. Work independently and as part of a team to help revise a set of airplane technical manuals (AFM, AMM, CMM, WDM, SRM) from engineering, manufacturing, flight, and supplier data.
4. Ability to create line art to illustrate aircraft parts and assemblies for use in aircraft technical manuals, parts catalogs and other related publications.
5. Able to develop isometric technical illustrations from scratch using basic technical illustration principles.
6. Experienced in interpreting blueprints, detailed engineering specifications, and schematics (electrical, hydraulic, and pneumatic).
7. Exhibit strong attention to detail and be an excellent communicator, verbally and through graphic visualizations

Education, Work Experience, Certification and/or Licensure:
1. Aviation technical writing experience required.
2. Knowledge of technical publication’s regulatory requirements and Industry Writing Specifications (ATA , GAMA, DITA and S1000D).
3. Experience authoring documentation in structured Adobe Framemaker (SGML, XML) and Cortona3D/Xmetal RapidAuthor (ATA task numbering; typical DTDs/schema, elements and attributes) or other .xml authoring software.
4. Experience with MS Office suite.
5. Experience using CAD/CATIA/3D illustrations.
6. Experience with Teamcenter PLM system.

Knowledge, Skills and Abilities:
1. Knowledge of aircraft systems and technical documentation, including illustrated parts catalogs, airplane maintenance manuals, operator manuals, and installation instructions
2. Past aviation maintenance or assembly work
3. Demonstrate strong attention to detail and personal organization
4. A fundamental understanding of FARs as they apply to aircraft operations, maintenance and design certification.
5. Excellent communication and computer skills.
6. Self-starter and able to make sound writing decisions with minimum assistance from supervision.


HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com


ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
 
Job Number: APTECHNC
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Yes
Duration: Long Term / Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Catia V5 V4 GD&T / 4 openings! - Clearance CA

Description:
164970
1574-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/4/2019
End Date: 6/2/2020

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Applicants must not have applied for Tool Design at LM-Palmdale in the last 6-mo.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly

Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1574-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years preferred****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.
- Must be US citizen.
- Active/Final Secret clearance.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Active/Final Secret clearance with most recent investigation completed within the last 5-years.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.
 
Job Number: 10969
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Design Fabrication w/Secret Clearance EM

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment tools, dies, gauges, jigs, fixtures, and prototype model parts.

Required:
*Active Secret Clearance
*5+ years experience in manufacturing environment in tool design/fabrication
*Strong experience designing using Catia parts, shapes assembly and draft of workbenches
*Engineering Degree

Preferred:
*Experience with structures, materials, sizing of mechanical, hydraulic or pneumatics
*Aircraft tooling and composites experience
 
Job Number: 190
Job Location: Palmdale, CA
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: AP226771
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer (Wing Design and primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWINGHON
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer (Wing Design and primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWINGHON
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Anti-Ice Design Engineer

Description:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
2. Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems.
3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required.
4. Knowledge of Aircraft Wing and Engine Anti-ice Systems
 
Job Number: 28-039
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: YES
Overtime: YES
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Engine Anti-Ice Systems Designer

Description:
General Summary:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.


Duties and Responsibilities:
• Prepare 3D layout models of the Wing and Engine Anti-ice Systems
• Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems
• Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems
• Work in a team environment supporting liaison engineering to research root cause and address production discrepancies


Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
• 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required
• Knowledge of Aircraft Wing and Engine Anti-ice Systems





The Structures Company is an AA/EOE.
 
Job Number: 302
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer()

Description:
Develops and maintains cable/wire harness detail and assembly designs.
Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
Develops basic statements of work.
Participates in technical review of supplier capabilities to facilitate source selection.
Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.
Wire harness design, electrical load analysis, research alternate parts and specifications to solve obsolescence issues, disposition non-conformances of fielded aircraft hardware or discrepant hardware from suppliers, research wire list electrical database, etc.
 
Job Number: WDIE_FL
Job Location: Fort Walton Beach, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search