Job Search Results

478 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 04:16PM Pacific Time by ContractJobHunter. )

Listings 1 - 478

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AVIONICS SYSTEMS ENGINEER

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

AVIONICS SYSTEMS ENGINEER
To work on a 6-9 month contract in Gig Harbor, WA
Responsibilities:
• Write requirements for the Systems Requirement Document (SYRD) and Mechanical Engineering Requirements Document (MERD).
• Write and execute tests (SBC based) for performing operational and functional tests and outputting pass/fail/data.
• Use of DOORS for requirements tracking and tracing.
• Produce FAA certification reports
• Participate in FAA Systems and Software (SR and SOI) reviews

Experience Requirements:
• Superior technical communication and writing skills with experience using requirement management tools, such as DOORS, Reqtify or equivalent.
• Bachelor’s degree in Engineering
• 7+ years of experience in requirements and/or testing.
• Embedded C/C++ Proficiency
• Individual must have a passion for aviation hardware and thrive in a fast paced environment
• Pilot background familiar with autopilots and other avionics for rotorcraft and fixed wing desired.
• FAA flight test engineering and data processing/analysis experience desired
• Hardware, Altium, DO-178B/C, ARP4754A, ARM Processor, I2C, RS-232/485, ARINC 429 familiarity desired.
 
Job Number: WW040718SYSHEL
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9 MONTHS
Start Date: April 23, 2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer
Lexington, KY
6 month contract


Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Responsibilities include: •Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn •The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations •You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education

Mandatory:

•Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs •Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position

Desired:

•Experience with Microsoft Office Suite (Word, Excel, PowerPoint) •Demonstrated previous success working in a team based
 
Job Number: 53713
Job Location: Lexington, KY
Rate: $65
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Systems Engineers - Wichita, KS

Description:
STS AeroStaff Services is hiring Aerospace Mechanical Systems Engineers in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Research existing technologies related to ABOS
• Develop familiarization with the T-6 On Board Oxygen Generation System (OBOGS)
• Potentially support build of prototypes of systems components for testing; set up and run laboratory simulations
• Create presentations to convey trade study recommendations
• Clearly communicate and coordinate with engineering technical sections, program management, and the T-6 system’s program office

Qualifications:

• Bachelor’s Degree in Mechanical Engineering, Aerospace Engineering, or related technical degree
• Background in Oxygen and/or Environmental Control Systems is desirable
• Working knowledge of FAA and/or Military processes and procedures to support system qualification is beneficial
• Experience in CATIA V5 is beneficial
• Professional and diplomatic demeanor
• Excellent written and verbal communication skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42045
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Software Engineer

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

Applications Software Engineer
To work on a 6-9 month contract in Gig Harbor, WA

Responsibilities:
• Develop software solutions for Windows applications
• Responsible for writing production level code
• Responsible for clean modern UI design
• Application will interface with embedded system to enable calibration, maintenance, and data collection

Experience Requirements:
• BS degree in Computer Science plus at least 5 years of industry experience
• Self-driven, results oriented developer who strives to write clean, modular, well commented code
• Comprehensive understanding of data structures and algorithm topics.
• Experience with concurrency topics (i.e. asynchronous programming) is required.
• Applied mathematics understanding of geometry, trigonometry, and matrices is a plus.
• Willingness to work on a team and can work in a fluid, highly collaborative environment.
• Candidate must demonstrate a passion for writing software and building stuff.
 
Job Number: 585
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: May 15, 2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Integration Engineer

Description:
Avionics Software Integration Engineer

Location: Pomona, CA
Pay Rate: $79/hr
Duration: 8 Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description/Comment:
-Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
-Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
-Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
-Designs and implements build procedures that are used to support hardware and software product development and use.

Requirements:
-BS in Software Engineering or Software-related discipline
-10 years minimum experience as a software engineer in and Aerospace company
 
Job Number: 8935
Job Location: Pomona, CA
Rate: 79
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Duties and Responsibilities:
Define, plan, and develop complex systems level requirements to support avionic systems
Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
Perform system evaluation and analysis to verify the system design compliance with functional requirements
Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
Develop targeted system level enhancements to address customer feedback and product improvement initiatives
Conduct system lab testing and aircraft functional testing
Prepare presentations on avionics system design/development status
Support system analyses for avionic systems

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
Working knowledge of design requirements of 14CFRPart 23
Proficiency in writing technical documentation and reports involving test data and analysis
Familiarity with avionics/electrical test laboratories and lab equipment
Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
Proficiency in requirements management tools such as DOORS
Proficiency in PLM Tools such as TeamCenter and SAP
Ability to handle complex work assignments
Ability to work independently and within a multi-functional team environment

The Structures Company is an AA/EOE.
 
Job Number: 189
Job Location: NC
Rate: $60.00
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3

Description:
Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Duration: 6 month contract
Shift: Regular 40 Hour Work Week – OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Creo design experience is required **
** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **
** PLM system experience is required. Windchill strongly preferred **

- Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
- Applicant must have prior turbomachinery design or development experience.


Requirements:
- Proficient experience using CREO 2.0 CAD System
- Experienced user of Windchill PLM System or similar
- Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
- Excellent experience in the creation of mechanical engineering drawings
- 9+ Years of related Aerospace Industry experience


Skills:
- Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and proficient use of Windchill PLM System.
- Advanced surfacing and modeling skills preferred.
- Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
- Ability to create mechanical engineering drawings, and related specifications.
- Ability to write clearly and concisely.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Knowledge of design practices, manufacturing techniques and inspection requirements.
- May require the use of various computer systems to produce data, analysis and reports.


Education:
- Bachelor’s or Master’s degree in an appropriate engineering discipline.
- Rocket propulsion design experience preferred.
 
Job Number: 8775
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3 AL

Description:
161674/7807767
Job Title: CREO Design Engineer - Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Creo design experience is required **



** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **



** PLM system experience is required. Windchill strongly preferred **



Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
Applicant must have prior turbomachinery design or development experience.




Requirements:

Proficient experience using CREO 2.0 CAD System
Experienced user of Windchill PLM System or similar
Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
Excellent experience in the creation of mechanical engineering drawings
9+ Years of related Aerospace Industry experience




Skills:
Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and profecient use of Windchill PLM System.
Advanced surfacing and modeling skills preferred.
Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
Ability to create mechanical engineering drawings, and related specifications.
Ability to write clearly and concisely.
Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
Knowledge of design practices, manufacturing techniques and inspection requirements.
May require the use of various computer systems to produce data, analysis and reports.






Education:
Bachelor’s or Master’s degree in an appropriate engineering discipline.
Rocket propulsion design experience preferred.

Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
PDM/WINDCHILL

State/Province: Alabama
City/Town: Huntsville

Start Date: 04/09/2018 Hours Per Week: 40.00
Est. End Date: 10/07/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7807767
Job Location: Huntsville, AL
Rate: 60/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3

Description:
Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.

Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.
40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.
10%: Test support for combustion devices components
20%: Supplier integration with external vendors
20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Experience working an equivalent engineering design/development environment is desired.
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering
-Ability to read and interpret blueprints, technical drawings and specifications
-Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.


Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).
 
Job Number: 8727
Job Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3 FL

Description:
161797/7804089
Job Title: Component Product Engineer (Project Engineer) - Level 2 / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.



Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.



40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.



10%: Test support for combustion devices components



20%: Supplier integration with external vendors



20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with liquid rocket propulsion systems desired.

-Experience working an equivalent engineering design/development environment is desired.





-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering

-Ability to read and interpret blueprints, technical drawings and specifications

-Ability to communicate clearly and concisely;May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.



Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: Florida
City/Town: Jupiter

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7804089
Job Location: Jupiter, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract

**Candidates must have an active Secret clearance or have had one within the last 2 years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Component Product Engineering (Project Engineering) in Rotating Machinery
-Candidates must have 6 to 9 years of experience
-This roll will not convert to a direct hire role unless circumstances significantly change

Skills:
Required:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
- BS Engineering or Equivalent BS degree
 
Job Number: 8145
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters

Description:
Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule, OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
- The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The candidate will also be a key resource in the design, development and testing of new electric propulsion products.
- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.


Skills:
Required:
- 2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
- Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).

Desired:
- Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
- Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
- Candidates should have strong technical writing and presentation skills, and should have experience working in teams.

Education:
- A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
- A Master's degree or higher in an engineering discipline or physics is preferred.
 
Job Number: 8872
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters ** Candidates must have Electric Propulsion or Plasma Physics education or experience ** WA

Description:
161793/8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Additional Information: More resumes needed! Candidates must have Electric Propulsion or Plasma Physics education or experience.

** Candidates must have Electric Propulsion or Plasma Physics education or experience **


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators

Description:
Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift – Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Component Product Engineers are also known as Project Engineers **
** Bachelors degree required **

25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.
-MSME/AE degree is highly desirable.
 
Job Number: 8664
Job Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the SpaceShipTwo pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes.
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering

· 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
· Proficient with CATIA V5
· Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
· Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
· Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
· Experience designing for aerospace environments desired
· Experience in the development of human spaceflight hardware desired
· Experience with Product Lifecycle Management (PLM) software and configuration management processes
· Excellent analytical and decision-making skills
· Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.

· Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

Required Skills:
Microsoft Office, CATIA, Structural design of primary and secondary composite aircraft structure.

The Structures Company is an AA/EOE.
 
Job Number: 73
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Cabinetmaker II

Description:
Unique Skills:
Must have experience with aircraft cabinetmaking Experience in aerospace industry and with products preferred.

Education and Experience Requirements:
High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years’ experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.

Position Purpose:
Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Principal Duties and Responsibilities:

Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work.

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required.

Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
 
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV

Description:
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** ** 10 years as a drawing and model checker for Aerospace mechanical hardware** ** Strong proficiency using GD&T per ASME Y14.5 ** ** 5-10 years Creo and Windchill PLM System ** Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships. 40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership. 30% - Performs design calculations to validate any phase of design requirements. 20% - Estimation of resources and schedule required to complete a design activity and training to staff. 10% - Provide technical guidance to less senior CAD designers and to design support personnel. Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered). -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required. -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5). -ASME Certification in GD&T is a plus. -Ability to read and interpret product definition and related specifications. -Electronic markup tools and the ability to work paperless is required. Education: -Requires a Bachelors degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 385801
Job Location: Canoga Park, CA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design Checker reports to the Engineering Manager the Design Checker is Responsible for checking and verifying engineering drawings and related documents to ensure accuracy, completeness, quality and use of design standards where work is of a complex nature by performing the following duties.

JOB RESPONSIBILITIES

• Verify engineering drawings to best practices and standards.
• Works with engineering personal to resolve discrepancies.
• Redline drawings in electronic format and communicates back to engineering team.
• Must be able to work independently and as a team
• Performs other related tasks as required.

• Must have a solid understanding of Microsoft offices including excel, word, and outlook.
• Must have the ability to read 3D models, drawings, and Bill of Materials
• Must have excellent communication skills
• Associate’s degree (A.A.) or equivalent from two-year college or technical school and 2-5 years of experience or seven plus years related experience and/or training

• Familiarity with NX9
• Familiarity with Teamcenter engineering
• Familiarity with aerospace standards
• Familiarity with Adobe Reader
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 / Bachelors degree is REQUIRED / GD&T / 10 years Design Engineer in rocket propulsion hardware and 10 years Designer using ProE / Creo URGENT CA

Description:
161251/7561968
(8122965)

Job Title: Design Engineer - Level 4

Number of Positions: 3

UPDATE 3-5-18: Manager is requesting candidates with really strong GD&T (Geometric Dimensioning and Tolerencing) experience. Please provide summaries of GD&T experience on your resume.


Must have a Bachelors degree. It is a requirement for this group.


Duties:




** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.

Skills:
Required
AEROSPACE DESIGNCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 02/12/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7561968
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical ( EWIS )

Description:
Electrical EWIS Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

Electrical EWIS Engineer selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique skills:
- Required as a Electrical Applications Engineer (TSII) at Company you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, backshells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8914
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Experience with Autocad and CATIA V5 required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. EXPERIENCE IN HARNESS INSTALLATION.
 
Job Number: 18-93664
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer has experience with AutoCAD required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Electrical Applications Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
 
Job Number: 24-243
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Are you an Electrical Engineer with a high level of experience utilizing your skills in AutoCAD? Are you looking for an opportunity to work in a fast-paced, team environment with one of the nation's leading aerospace companies? We are currently seeking an Engineer in the Lexington, Kentucky area and would love to speak with you.

The ideal candidate for this position will perform the following tasks:
* Researches and designs electrical systems for integration into various fixed wing platforms.
* Interpret customer requirements to research
* Develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards

Mandatory Qualifications and Experience:
* Familiarity with SAE AS50881 design guidelines
* Understanding of ANSI/ASME Y14.100 or related design and drafting standards
* Experience with AutoCAD or similar 2D design software tools
* Demonstrated previous success working in a team based environment to meet objectives

Desired Qualifications and Experience:
* Familiarity with C130 or other fixed wing aircraft
* Experience with programming environments Labview and/or Matlab
* Experience with the an engineering change process and/or configuration control process
* Experience with Catia V5 or other modern 3D parametric modeling program
* Experience with Teamcenter PLM software
* Must be able to obtain an Active DoD secret level clearance

The ideal candidate for this position will possess the following skills and characteristics:
* Strong communication skills, both oral and written
* Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis)
* Ability to create and review all electrical drawing types (schematics, cable harness, etc)
* Ability to work under little or no supervision

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127501
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Hood River, WA)

Description:
Join an Industry leader in the UAV field that understands the importance of a work life balance. We are located in Hood River which means you will be working in one of the most beautiful places in the US and an resort area for some of the best outdoor activities in Oregon. We work a 9/80 schedule which means 26 three day weekends a year. You will be working on challenging and interesting projects for a dynamic company that values a Pioneering spirit.

Will be responsible for implementing electrical system architecture, identifying new technologies and develop design requirements. Allocates requirements across system architecture and designs and conducts trade studies. Monitors subsystem design development activities for architectural consistency. Performs and/or evaluates risk assessments and generates or approves risk mitigation plans and strategies.
Decomposes system requirements and evaluates sub system design development. De-conflicts and resolves module-level requirements allocations. Creates and/or reviews electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes the electronic hardware interface designs and review and monitors design consistency. Develops and/or reviews and approves electronic hardware documentation packages.

QUALIFICATIONS
Do you have experience with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts within circuit design? Familiar with Rigid PCB technologies (IPC Standards, PCB fabrication, PCBA Assembly processes and documentation standards, AS9100 standards), Ethernet, RS232 and VeriLog? Familiarization with Flex and Rigid-Flex Technologies would be a plus.

Education & Experience
Typical experience: 9-13 years in an engineering classification with a Bachelor's degree or 7-11 years experience in an engineering classification with a Master's degree

Specific Experience Required
CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
Test and Debug: Mixed Signal Oscilloscope, Spectrum Analyzer, Digital Multi-meter, Programmable Load and other test tools.

Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
Programming skills(added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEENGR
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager needed for an immediate full time opportunity with our client in Burlington MA. As a key contributor you will serve a dual-role taking on technical engineering responsibilities and manage, mentor and develop a small staff of electrical and firmware engineers. Please apply below and call me today for immediate consideration. Thank you.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Provides electrical engineering recommendations and technical support on electrical engineering reviews, strategic plans, and projects

  • Assists with allocation, budgeting, resource planning, and scheduling

  • Manages unit and development cost estimations and helps determine affordable and reliable material sources

  • Ensures on-time product development by collaborating with other leaders to estimate reasonable and precise schedules and solve problems quickly

  • Streamlines production while meeting compliance and safety guidelines

  • Creates production, quality validation, and evaluation requirements and tests and troubleshoots production dilemmas

  • Establishes technical standards in reviews, documentations, and designs


Required Skills and Experience


  • Bachelor's Degree in Electrical Engineering with 7+ years' experience in the automotive, aviation, or robotics industry

  • Experience with multiple hybrid and electric vehicle electronic architectures

  • Experience with CANbus

  • Experience with schematic capture and PCB layout using modern EDA tools

  • Experience with automotive, robotics or aviation/aerospace wiring harness and connector component sourcing

  • Experience with automotive, robotics or aviation/aerospace product development

  • Experience with design control and change management techniques


Desired Skills and Experience


  • Master's Degree in Electrical Engineering or related field

  • Knowledge of Embedded coder, Simulink, autocode generation process, RTE generation, and bootloaders

  • Familiarity with the ISO 26262 specification




 
Job Number: 18-13443
Job Location: Woburn, MA
Rate: 140000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer 3 (Hood River, WA)

Description:
Embedded Software Engineer 3

JOB DESCRIPTION
As a member of the Software Engineering department you will:
• Be a key player in an agile software development team
• Solve challenging engineering problems and participate in the development of real-time safety critical embedded software using industry best practices
• Ensure software testability, test coverage and test maintainability
• Be responsible for assuring the delivery of high quality products and software services
• Prototype and integrate software solutions on target hardware platforms
• Consult and support fellow electronic hardware engineers and other engineering staff
• Take responsibility for achieving goals and meeting project deadlines
• Have fun in a tight knit team while working on a game changing UAS!

QUALIFICATIONS
• Experience with compiled programming languages, C/C++.
• Understanding of computing machinery (memory, secondary storage, I/O, FPGA, processor, data bus, etc.) as it relates to software.
• Experience with microcontroller/assembly/firmware development.
• Experience designing for resource constrained systems and experience with firmware and embedded systems software development.
• Strong problem-solving abilities, careful attention to detail, open to taking direction and adapting to course corrections.
• Experience with hands-on troubleshooting hardware and debugging software
• Ideal candidate has experience with safety critical systems.
• Excellent communication and interpersonal skills; able to work well individually or in a team.
• Ability to independently identify and address tasks
• Strong organization and time management skills
• Willingness to learn and contribute to a team environment

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEMBED
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer

Description:
Embedded Systems Engineer needed to join development team.



Job Responsibilities

  • Aid in the development of the Vehicle Control Unit (VCU) and/or Electronic Control Unit (ECU);

  • Create/refine finite state machines, and implement controllers for vehicle systems in software;

  • Aid in the development of a system for distributed control of an engine, electric motors, and actuators over a CAN network;

  • Support the design of a wing fold interface system working with existing electromechanical actuators/sensors;

  • Support definition of the data interface specification (e.g. CAN, RS-485, etc.);

  • Integrate microcontroller software for CAN bus based actuation and sensing per DO-178 (potentially implemented via Simulink and Stateflow);

  • Address custom CAN messaging and VCU communications with hand coding as required;

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Coordinate and communicate effectively with other engineers, technical personnel, and management;

  • Support and participate in testing activities component, drive, and/or flight as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities and best practices, including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications


  • The candidate must have:

    • A Bachelor's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 5+ years technical work experience, or;

    • A Master's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 3+ years technical work experience.



  • Proven experience with robust software development cycles: taking software from concept through detailed development, executing code on targets, and testing to internal/external requirements;

  • Proven experience developing software for automobiles, particularly for vehicle control;

  • Experience with CAN messaging protocol;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Software Experience: C/C++.


Highly Desired Qualifications


  • Experience with software design, documentation, and testing per DO-178B/C;

  • Functional safety experience with ISO-26262 or IEC 61508;

  • Formal training or practical experience with software revision control techniques and tools;

  • Experience with ASTM F2245 or FMVSS;

  • Experience with LabVIEW or other real time data acquisition software;

  • Experience programming CPLDs or other logic devices;

  • Familiarity with modern electrical design layout tools such as Altium or Cadence products;

  • Knowledge or expertise in CAN Aerospace, CANopen, SAE J1939, ARINC-429 ARINC-825protocols;

  • Familiarity with Python or Perl;

  • Familiarity with Fortran.




 
Job Number: 18-13621
Job Location: Woburn, MA
Rate: 130000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Hong Lu
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Embedded Software 5 / must be able to obtain secret clearance CA

Description:
1644
Engineer Embedded Software 5 (Job Number: 18007330)

Number of Openings: 1

Location(s): United States-California-Azusa


Shift: 1st Shift

Target Start Date: May 7, 2018

Target End Date: May 3, 2019

Pay: $87.00 - $95.00/hr

Location: Azusa, CA

Work Week: 9/80A

Duration: 1 year

Clearance: Secret preferred, but not required to start.

Northrop Grumman’s Aerospace Sector, Military & Civil Space Systems Division, Azusa CA, is in need of an Embedded Software Engineer to work with an outstanding team in support of next generation satellite sensors.

The candidate will be required to perform software development and maintenance of flight software which performs satellite payload on-orbit missions. The candidate will troubleshoot any anomalies found with the flight software, and provide technical expertise on key technological problems involving the flight software. Good presentation and writing skills are also essential.


Basic Qualifications:

- 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.Bachelor’s degree in a STEM field (Science, Technology, Engineering or Mathematics)
- A minimum of 5 years of experience with embedded software design, development and implementation
- Experience with Real Time Process (RTP) using VxWorks
- Experience with writing hardware device drivers for embedded software applications
- Strong real-time programming skills with C or C++ programming languages
- U.S. Citizenship is required.


Preferred Qualifications:

Master's Degree in a STEM field (Science, Technology, Engineering or Mathematics)
- Experience with writing hardware device drivers for PowerPC P2020 processor board
- Experience with Space Microsystems Proton400kTM Board Support Packages (BSP)
- Experience with writing make file for compiling optimizing the software executable
- Experience with Downloadable Kernel Module (DKM)
- Experience with Perl or Python programming language
- Must be able to obtain an retain an Active DoD Secret or higher clearance or Active Secret Clearance preferred
 
Job Number: MB-18007330
Job Location: Azusa, CA
Rate: 87-95/hr
Per Diem: no
Duration: 1 year
Start Date: 9/80
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker

Description:
HIRING: Engineering Design Checker! We are seeking candidates with the ability to obtain a secret clearance and CATIA V5 experience. We have an excellent opportunity for you! Open and apply, if you qualify!

The ideal candidate for this position will perform the following tasks:
* Examines engineering drawings
* Support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
* Responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
* Responsible for reviewing change documentation and its related incorporations for completeness and correctness.
* Will help develop a set of common Design Standards that meets our Customers and Program requirements.
* Will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Mandatory Qualifications and Experience:
* Ability to obtain a secret clearance
* Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards *CATIA V5 experience
* Familiarity with Change Documentation process and all related requirements to this process
* Microsoft office suite experience

Desired Qualifications and Experience:
* Teamcenter or similar PDM/PLM software tool
* Experience working in an aerospace environment with exposure to or interface with DoD customers
* AutoCAD or other 2D drafting program

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127407
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Designer 3/4

Location: Everett, WA || Auburn, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Skill Code:
66W-Tech Designer

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03763
Job Location: Everett, Auburn, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66V-Analysis Engineer
 
Job Number: 18-03764
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III - (Everett, WA)

Description:
SEVERAL OPENINGS IN EVERETT, WA.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. CATIA V5

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS SYSTEMS / SOFTWARE ENGINEER

Description:
ENEA is working with a client to provide System Software Analysis on Flight Management Systems (FMS). We are looking for an engineer with direct FMS experience and has functional expertise in one of the following areas: Performance, Navigation, Guidance, or Communications/DataLink.
RESPONSIBILITIES:
• Perform system optimization and assess overall performance through the use of in-house or custom-developed analysis tools.
• Compare the performance of architecture variants and conduct trade studies.
• Mentor and work with junior analysts as part of larger study teams.
• Apply broad and/or deep experience with customer aerospace systems and technologies in one or more specific functional areas (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide expert advice within a specific technology or functional area (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide support for growing modeling and analysis capabilities in new support areas.
• Interact independently with program office and customer organizations.
• Creatively and effectively apply analysis to problems as needed.
BASIC QUALIFICATIONS:
• BS degree in Engineering (preferably Computer Science or Electrical Engineering)
• 10+ years’ experience in Systems and Software Engineering.
• Substantial experience or background in one of the following areas: architecture performance analysis and modeling; optimization and/or decision support; communications systems analysis; electronics systems analysis, software and/or simulation development.
• Excellent written and verbal communication skills.
• Dependability and good interpersonal skills.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive to Medical and Avionics. We have offices in Europe, North America, and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
Enea Software and Services, Inc.

(Enea) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Enea complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Enea Software and Services, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Enea’s employees to perform their job duties may result in discipline up to and including discharge.
 
Job Number: WW011118GE
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 3-6 MONTHS
Start Date: 1.22.18
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flammability Engineer

Description:
JOB SUMMARY

Flammability Engineer reports to the Engineering Manager the Flammability Engineer responsible for review of engineering designs and development of flammability substantiation data to demonstrate compliance with regulatory and customer requirements. Specifically, this role is to support the Interior Structures Business Unit in the qualification, testing and certification of major aircraft interior commodities, and provide technical support for ongoing continued airworthiness. Role may include complex assignments such as managing several projects simultaneously in a schedule intensive environment.

JOB RESPONSIBILITIES

• Contributes to successful project completion by participating in the review of designs, regulatory/customer requirements, and qualification plans while developing substantiation data documentation to support project goals.
• Prepares flammability test drawings, test plans, test reports, and qualification documents.
• Reviews engineering design changes and prepares change-based documentation for flammability compliance.
• Candidate is required to possess a working level knowledge of fire property regulations including; 14CFR 25.853, and OEM requirements for smoke and toxicity.
• Candidate is required to possess a working level knowledge of FAA policy related to acceptable methods of compliance (MOC’s) for flammability.
• Supports fire properties testing including coordination for internal and external laboratory tests (Bunsen burner, Heat Release, Smoke Density and Toxicity).
• Work with customer design engineers, subject matter experts and FAA authorized Representatives to establish acceptable showing of compliance for flammability.
• Working knowledge of material qualification, process qualification, etc.
• Experience in material testing including ASTM standards testing.
• Knowledge of generating repair processes for MRB
• Experience in working with honeycomb structures’
• Basic knowledge and proficiency with team center (or related product data management system), including familiarity with aerospace drawing/document control systems for change management.
• Ability to work in a cross-functional manner with design, manufacturing, quality, supply chain, program management, and customer during product/data development to ensure all aspects are considered from the outset.
• Travel requirement – up to 10% both internationally and domestically.


• Bachelors degree from a four-year university or college and minimum of 3 years of experience that demonstrates:
o Knowledge of basic material characteristics, flammability of materials.
o Ability to interpret material and fabrication process specifications for non-metallic structure.
o Basic knowledge of composite manufacturing methods, vacuum forming, injection molding, composite materials, bonding, trim and finish.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV

Description:
Support Equipment Design Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Ground Support Equipment (GSE) experience is required.
** Creo experience is required **
** 10+ years experience and a Bachelors Degree or equivalent are required **
**(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
-Must be an experienced engineer with knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

Education:
-Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
-Experience in Design and Manufacturing is a must.

Skills Required:
GROUND SUPPORT EQUIPMENT CREO AEROSPACE
 
Job Number: 8235
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV / Candidates needed with Ground Support Equipment DESIGN experience and Creo experience required URGENT CA

Description:
7610419/161126
Job Title: Support Equipment Design Engineer IV

Candidates needed with 5 to 10 years of Ground Support Equipment Design experience. The manager wants to clarify that this is a GSE Designer role, not a GSE Drafter role.


Number of Positions: 2

Remaining Positions: 1

Candidates should have Ground Support Equipment (GSE) experience.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 10+ years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.


Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.

Skills:
Required

GROUND SUPPORT EQUIPMENTCREOAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7610419
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Designer III

Description:
Ground Support Equipment Designer III

Location: Canoga Park, CA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 7 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP; NO DUAL PASSPORTS**

Duties:
-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Requirements:
** Ground Support Equipment (GSE) experience is required**
** Creo experience is required **
** 5 to 10 years experience and a Bachelors Degree or equivalent are required **
-Aerospace Assembly Support Equipment Design & Product Design Experience required
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines
-Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.

Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.
 
Job Number: 8616
Job Location: Canoga Park, CA
Rate: 40-55
Per Diem: Split Possible
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Designer III / Ground Support Equipment (GSE) experience is required CA

Description:
Job Title: Ground Support Equipment Designer III

Number of Positions: 6

Remaining Positions: 6

The manager wants to clarify that this is a GSE Designer role, not a GSE Drafter role.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 5 to 10 years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.
Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.


Skills:
Required
GROUND SUPPORT EQUIPMENTCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL
Additional
GSEDESIGN ENGINEERAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 02/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7569549
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance Navigation & Control Engineer’s Level 2, 3, 4

Description:
Guidance Navigation & Control Engineer’s Level 2, 3, 4

Guidance Nav & Control Engr 2
Gathers, defines and documents system level requirements to support flight control and mission or trajectory requirements. Performs and documents design and analysis of Guidance, Navigation and Control (GNC) models and tools. Supports troubleshooting of routing operational anomalies, functional tests and services incidents. Executes tests, performs analysis or simulation and design review per FAA, MIL-SPEC and NASA guidance to deliver a compliant product. Supports development of solutions and disposition of issues to assure customer satisfaction. Participates in new business development efforts. Works under general supervision.
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

Guidance Nav & Control Engr 3
Gathers, defines and documents system level requirements to support flight control and mission or trajectory requirements definition. Resolves requirement conflicts. Performs and documents analysis and design of Guidance, Navigation, and Control (GNC) systems to validate or assess the system design or models. Develops solutions and disposition of issues to assure customer satisfaction. Designs trade studies to meet program requirements. Works under general direction.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Guidance Nav & Control Engr 4
Gathers, defines and documents system level requirements and investigates actions necessary for requirements definition and flow-down improvement. Performs and documents design of Guidance, Navigation, and Control (GNC) systems and guides experienced engineers in performance of the designs. Develops GNC and mathematical tools and techniques and aids in developing Technology roadmaps. Performs or directs test data analysis and documentation. Presents findings of compliance to regulatory agencies, negotiates certification basis in alignment project goals, simulation and design review per FAA, MIL-SPEC and NASA guidance. Trains and coaches others. Works under minimal direction.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com
2. Please include month/day of birth (NOT Year) – required for this aerospace client •


Sincerely,

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APWAGNC
Job Location: Everett, WA
Rate: $ 64.00 - $ 86.0
Per Diem: No
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Designer

Description:
Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. 2D Drawing Design Preferred.

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required.
 
Job Number: 18-682-126041
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Designer

Description:
Aerospace experience required. Knowledge of Catia V5.
Must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
Must be able to assign wire /cables to their correct harness assembly based on EMI/EMC. US citizen
 
Job Number: 041
Job Location: Savannah, GA
Rate: open
Per Diem: Possible
Overtime: yes
Duration: 6 month plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Barb McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
- Aerospace experience is required.
- Knowledge of Catia V5 is required.
- Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
- Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
- Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
- Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
- 2D Drawing Design Preferred

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Exchange Administrator

Description:
IT Exchange Administrator

Location: Orlando, FL
Rate: $50/hr
Duration: 6 Month W2 Contract, 9/80
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
A major aerospace company is looking for a temporary Exchange Administrator to act as email architecture specialist for IT systems across two geographic locations. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

Skills:
Required:
Provides technical expertise in all areas of Microsoft Exchange and software/hardware interconnection and interfacing. Prepares network documentation, including operational instructions. Provide monitoring, maintenance and advanced support of Exchange across the enterprise. Participates in major network installations and upgrades.

Desired:
•7 years of overall experience preferred.
•Implements policies, procedures, and technologies to ensure Exchange server security through secure access, monitoring, control, and routine security evaluations.
•Manages Exchange database(s), antivirus applications, messaging filtering, and error log tracking.
•Recommends, schedules, and performs software patches, upgrades, and/or purchases. Ensures that Exchange server implementations comply with policies, standards, licensing agreements, and configuration guidelines.
•Ability to work overtime and weekends required on occasion
•Anticipates, mitigates, identifies, responds to, and resolves problems affecting email systems performance, efficiency, and availability.
•Understanding of MS Exchange 2016, Public Folder management, Archive Mail, Active Directory Group Policies, Microsoft PowerShell, Windows Server 2008 and 2012.

Education:
BS in Information Technology or related field

Required Skills:
ACTIVE DIRECTORY EXCHANGE MAINTENANCE MS EXCHANGE ORGANIZATIONAL SKILLS
 
Job Number: 8885
Job Location: Orlando, FL
Rate: 50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineers - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Industrial Engineers in Greensboro, North Carolina.

General Summary:
The Industrial Engineer position provides technical support for the Quality Department, working across the Quality Assurance, Quality Control, and Quality Flight Test groups.

Duties and Responsibilities:
• Works with individual teams to develop and maintain reports to support day-to-day operation.
• Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
• Collects and analyzes data and metrics and presents the information to large audiences.
• Applies statistical methods and performs mathematical calculations to determine Quality Assurance and Quality Control processes, labor requirements, and standards.
• Develops and maintains work areas.
• Plans, schedules, and prioritizes work to meet established deadlines.
• Determines and improves processes to meet production levels.

Education, Work Experience, Certification and/or Licensure:
• Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) or 7+ years equivalent work experience may be substituted for education.
• 3+ years of experience in manufacturing.
Knowledge, Skills and Abilities:
• Strong analytical and innovative skills.
• Ability to translate raw data into meaningful performance metrics.
• Strong work ethic.
• Ability to multitask.
• Ability to work under minimal supervision.
• Detail oriented.
• Excellent problem solving skills.
• Ability to read and interpret engineering drawing and/or specification requirements.
• Excellent communication skills, both verbal and written.
Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

Benefits:
STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 33741
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
• Interior design engineering for cabin & cockpit structures, components, and trim for aircraft.
• Serve as interface between design engineering, suppliers, and production departments.

Requirements:
• Engineering degree and minimum of 5 years applicable experience.
• CATIA V5 (or equivalent) 3D modeling and engineering drawing skills.
• Knowledge of aerospace materials, fasteners, and standards, as well as basic principles of design engineering including material selection and optimization for manufacturability, cost, and weight.
• Experience with design and installation drawings for aerospace interior components such as cabinets, seats, interior panels, trim, cargo liners, tables, pocket doors, and lavatories.

Preferred Qualifications:
• Knowledge of Part 23 & 25 certification process and regulations.
• Experience with interior design (styling), ergonomics/human factors, fabrication methods, mockups, assembly techniques, component testing, and vendor interface.
 
Job Number: 28-019
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics / Supply Chain Mgmt Analyst's (30+ Openings Everett, Renton, Auburn, - Albert)

Description:
Logistics / Supply Chain Mgmt Analyst’s (40++) needed for a contract opportunity with Yoh’s client located in Everett, Auburn, Renton, WA

The Big Picture – Top Skills Should You Possess:
• Incorporates change and planning decisions to arrive at optimal solutions. Applies Supply Chain Management (SCM) methodologies to ensure coordination in the global supply chain..

What You’ll Be Doing:
• Analyzes complex material requirements. Verifies and incorporates Bills of Material/schedules into a production plan.
• Determines part number attributes. Initiates, coordinates and authorizes release of orders by evaluating system requirements and resource availability. Ensures on-time delivery. Documents and resolves order delinquencies. Reports schedule adherence issues.

What You Need to Bring to the Table:
• Develops and controls inventory plans. Optimizes inventory levels. Analyzes and dispositions excess inventories.
• Initiates audits. Develops and creates schedules for products and services. Assists in developing estimates and schedules for new business proposals.
• Implements and maintains process improvements by analyzing and establishing best practices for materials management to improve SCM performance.
• Works under general direction.
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APSUPCHA
Job Location: Everett, WA
Rate: $30.00 - $33.00
Per Diem: None
Overtime: Possible
Duration: 6 months plus
Start Date: 04-27-2018
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: George Pullen
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer 3 / Ability to obtain Secret Clearance CA

Description:
1642
Logistics Engineer 3 (Job Number: 18006742)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 28, 2018

Target End Date: May 24, 2019

Pay Rate: $42/hr

Work Schedule: 9/80

Location: Redondo Beach, Ca

Duration of Assignment: 1 year

Clearance: Ability to obtain Secret


Responsible for the technical coordination, planning, execution, and management of NGAS-derived support and deliverables within the broader F-35 Maintenance, Repair, Overhaul and Upgrade (MRO&U) competency. Position involves significant collaboration with engineering, supply, operations, program office and customer stakeholders to conceptualize, develop, mature and brief/solicit government approvals of comprehensive retrofit projects. Develops corresponding Basis of Estimate documentation conveying technical scope and rationale for NGAS deliverables and labor projections. Support and review modification engineering, Time Compliance Technical Directive (TCTD) manuscripts and provide virtual support for associated verification events. Candidate may be required to routinely work extended hours and weekends to meet program objectives. Lead modification tools and tooling development activities and coordinate for related inspections, fielding and engineering support. Must possess excellent interpersonal, written and oral communication skills and experienced leveraging Microsoft Office suite applications. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex technical and logistical challenges involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

• Bachelor of Science degree from an accredited college in Aerospace Engineering, Mechanical Engineering, or related field of study is required
• 5 years of experience related to aircraft modification, maintenance and related logistical operations.
• Prior aircraft tooling development, verification and utilization experience.
• Applicant must be proficient in Windows, MS Word, Excel, Access and Power Point
• Verbal, writing, presentation, and leadership skills are essential.
• Ability to obtain a Secret clearance
• US Citizenship

Preferred Qualifications

• Understanding of Project Management fundamentals
• Familiarity with F-35 air vehicles a plus
• Current Active Secret Clearance
 
Job Number: MB-1642
Job Location: Redondo Beach, CA
Rate: 42/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL PROJECT / STAFF ENGINEER

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace and defense markets.

We are currently searching for a Mechanical Project/Staff Engineer to lead the design and analysis of Hydraulic Flight Controls Actuation Systems for Defense and Aerospace applications.

Scope of Experience and Responsibilities:

10 plus years as a Subject Matter Expert (SME), leading innovation and technical development for hydraulic actuation systems.
Will be responsible for the New Product Introduction design, analysis, development and test for 'Platform Technologies'.
Ability to effectively lead a project team environment and collaborate with customers.

Knowledge of FEA and the use of related analysis tools and methodologies, to perform hydraulic, stress and control theory analysis.
Collaborate with other senior leadership, and may direct engineers, as required.
Will execute Design for Manufacturability (DFM) practices, within a Lean, Six Sigma environment.

Contribute to product design proposals with internal stakeholders, to ensure that customer requirements and specifications, as well as manufacturing/cost implications and met.
Implement process improvements at a senior project level.
Ability to successfully drive projects through the Product Lifecycle (PLC).

Education:

Bachelor of Science degree in Engineering or equivalent discipline.
Master of Science degree in Engineering or equivalent discipline is a plus.

Start Date: Immediate

Duration: Direct Hire

Compensation: Highly competitive, including a highly competitive salary, lucrative bonus and comprehensive benefits.

Relocation: Relocation assistance may be available
 
Job Number: 364700
Job Location: Santa Clarita, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required



ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.


The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: CA
Rate: Up to $65.00-DOE
Duration: 9+ Month
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-240
Job Location: Long Beach, CA
Rate: DOE but competitve
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Essential Job Functions:



· Coach/train less experienced engineers in Manufacturing Engineering.

· Monitor/improve the capabilities of the Manufacturing Engineers. Assist with projects/task when necessary.

· Technically review manufacturing engineering deliverables and help guide those on the technical career path.

· Provide manufacturing engineering solutions in the areas of process planning, and shop support activities.

· Drive internal and supply base activities related to Statistical Process Control, Capacity Assessment, First Article Review, Risk Assessments, PFMEA, and Gage R&R studies to meet QuEST’s customers’ quantity and schedule demands

· Provide engineering support to our customer’s (and their supplier’s) manufacturing/assembly organizations to troubleshoot and resolve technical problems.

· Participate in part valuation model creation and validation

· Drive improvements in all related manufacturing processes, including those related to products, equipment, and product quality for customers



Secondary Job Functions:

· Support project management and program management to quote and close work packages

· Develop work instructions and trainings to implement best practices / lessons learned and ensure repeatability

· Assist in interviewing and hiring new resources



Specialized Knowledge / Skills

· Experience with creating training material or work instructions desired

· Experience coaching entry-level engineers is preferred

· Experience with various manufacturing processes such as turning, 3-5 axis milling, grinding, broaching, special processes, and sheet metal/fabrications.

· Well versed in engineering & manufacturing drawings.

· Expert in interpreting GD&T standards (ASME Y 14.5).

· Knowledge in Measurements system analysis (MSA).

· Hands on experience in various machining, involving CNC and conventional methods and assembly techniques.

· Experience in the Solumina software.

· Familiarity with CMM and CAM offline/ Online programming.

· Knowledgeable in methods of inspection & Gauging concepts.

· Data collection and Analysis using QC tools and other SPC techniques (Control Chart, Control Plan, Design of Experiment, Gage R&R, KPCs, PFMEA, Process Capability Indices, Process Mapping)

· Experience/knowledge in APQP, PPAP, LEAN & 5S management

· Exposure to Aero/ Auto industry is preferred

· Familiar with aerospace/auto quality requirements (AS9100, OSHAS, TS 16949, various ISO)

· Familiar with NADCAP programs for Aero space (Civil & Defense) parts



Education, Training, and Experience

· BS/AS in Manufacturing, Mechanical, or Industrial Engineering

· Minimum hands on experience in Manufacturing Engineering 4+ years
 
Job Number: Man 01
Job Location: Lafayette, IN
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 601
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Duties and Responsibilities:
1. Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes.
2. Manages and supports the implementation of enhancements to procedures, processes and operating tools.
3. Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with all other relevant procedures and communicate awareness of changes.
4. Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements.
5. Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality.
6. Participates in activities to enhance and support HACI Production teamwork, and provide an environment for all team members to participate in CI (Continuous Improvement).
7. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
8. Analyzes a variety of engineering data to help determine requirements to meet objectives.
9. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
10. Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”.

Education, Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
3. 5+ years experience in aerospace industry in aerospace manufacturing.
4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**An In-Person interview is REQUIRED. Candidates must be able to attend an in-person interview at their own expense**


Duties:
** Looking for a go getter with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 3 candidates will have up to 2 to 5 years of applicable experience **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8706
Job Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Duration: 6 month contract
Shift: 2nd Shift – 2:30 PM to 11:30 PM - Regular 40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
** This role will be working second shift. 2:42 PM to 11:30 PM **
** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 4 candidates will have 5 to 9 years of applicable experience **
** Candidates must be able to attend an in-person interview at their own expense **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8707
Job Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 3 CA

Description:
161431/7579579
Job Title: Manufacturing Engineer / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 3 candidates will have up to 2 to 5 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7579579
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 4 / 2nd shift CA

Description:
161466/7679383
Job Title: Manufacturing Engineer / Level 4

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** This role will be working second shift. 2:42 PM to 11:30 PM **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 4 candidates will have 5 to 9 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.


Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7679383
Job Location: Canoga Park, CA
Rate: 58/hr max
Per Diem: no
Duration: 6 months +
Start Date: ** This role will be working second shift. 2:42 PM to 11:30 PM **
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handlers - Kent, WA

Description:
STS AeroStaff Services is hiring Material Handlers in Kent, Washington.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Scrapping and segregating a mass amount of aerospace parts as we close down one of our warehouses

Qualifications:

• Must be a US Citizen
• High School Diploma or GED
• Forklift Certified Driver

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42013
Job Location: Kent, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Management (Supply Chain) Analyst's (30+ Openings Auburn, Everett, Renton - AP)

Description:
Materials Management / Supply Chain Mgmt Analyst’s (40++) needed for a contract opportunity with Yoh’s client located in Everett, Auburn, Renton, WA

The Big Picture – Top Skills Should You Possess:
• Incorporates change and planning decisions to arrive at optimal solutions. Applies Supply Chain Management (SCM) methodologies to ensure coordination in the global supply chain..

What You’ll Be Doing:
• Analyzes complex material requirements. Verifies and incorporates Bills of Material/schedules into a production plan.
• Determines part number attributes. Initiates, coordinates and authorizes release of orders by evaluating system requirements and resource availability. Ensures on-time delivery. Documents and resolves order delinquencies. Reports schedule adherence issues.

What You Need to Bring to the Table:
• Develops and controls inventory plans. Optimizes inventory levels. Analyzes and dispositions excess inventories.
• Initiates audits. Develops and creates schedules for products and services. Assists in developing estimates and schedules for new business proposals.
• Implements and maintains process improvements by analyzing and establishing best practices for materials management to improve SCM performance.
• Works under general direction.
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APSUPCHA
Job Location: Auburn, WA
Rate: $30.00 - $33.00
Per Diem: None
Overtime: Possible
Duration: 6 months plus
Start Date: 04-27-2018
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Independence, OH
Rate: $48.25 - $60.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split


**MUST be a U.S. Citizen**

**MUST have Catia V5 Detailed modeling and FTA generation, layouts and checking experience**

**MUST have experience with Landing gear and or hydraulic actuators**

**MUST have a BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING**

Job Description:
Design project lead in research, design, and development of mechanical applications to the design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Design Lead Engineer will be responsible for developing complete Landing Gear layouts in response to customer requirements and design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program.


Requirements:
- BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING and 10+ years of experience and US Citizen status is required.
- Knowledge of PDM (Smarteam, MatrixOne, Team Center) systems, Catia V5, & MS programs (Word, Excel, Project, Power Point).
 
Job Number: 8462
Job Location: Independence, OH
Rate: $48.25 - $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad Becker
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer (Rotating Machinery) to join our development team. . As a key contributor, you will work within the Drivetrain group to design, analyze, and participate in system integration activities for the products road-mode drivetrain.



Job Responsibilities:



• Design, analysis, and system integration activities for flight-mode drivetrain, including:

• Mechanical loads definition;

• Engine-to-propeller power transmission;

• Engine-Generator mechanical coupling;

• Material selection for durability and low weight;

• Propshaft, couplings, and shaft-driven rotating accessories;

• Integration of the flight-mode drivetrain with the airframe structure.

• Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

• Coordinate and communicate effectively with other engineers, technical personnel, management, and external suppliers;

• Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD

• Perform analyses, via hand calculations and FEA, to validate designs;

• Support and participate in testing activities as needed, including test plan creation, data analysis, and test report generation and documentation;

• Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.





Qualifications:



• The candidate must have:

• A Bachelor's degree in Mechanical, Automotive, or Aerospace Engineering and 5+ years technical work experience, or;

• Master's degree in Mechanical, Automotive, or Aerospace Engineering and 3+ years technical work experience.

• Advanced SolidWorks experience; • Proven experience in rotating machinery/drivetrain design;

• Familiarity with established design techniques to mitigate rotating imbalance;

• Expertise performing static and/or modal analyses for mechanical systems;

• Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

• Proven definition or production of manufacturing drawings including selection of dimension tolerances;

• Familiarity with material selection to meet strength, weight, durability, and cost targets;

• Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;





Highly Desired Qualifications:



• Hands-on experience (work or personal) with rotating machinery assembly/disassembly;

• Proven ability to select appropriate bearing types/sizes, shaft splines, and mechanical couplings for drivetrains;

• Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD • Background in designing with aerospace grade materials including fiber reinforced composites;

• Exposure to ANSYS Workbench, FEMAP/NASTRAN or any similar sophistication FEA software;

• Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

• Familiarity with ASTM F2245 regulations;

 
 
Job Number: 18-13398
Job Location: Woburn, MA
Rate: 105000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer needed for an immediate full-time opportunity with our client in the Burlington MA area. 



Job Summary 

We are currently looking for a world-class Mechanical Engineer (Mechanisms) to join our development team. Candidates should be self-starters who bring positive attitude, integrity, and enthusiasm to our team as we transform personal transportation.



Job Responsibilities 

  • Design, analysis, and system integration of the throttle and gear selection controls, including:

  • Combining mechanical and throttle-by-wire engine control mechanisms;

  • Developing the gear selection mechanism to interface with the hybrid powertrain;

  • Defining mechanism degrees of freedom, latching states, and sensor interfaces;

  • Supporting sensor selection/integration for sensing commanded vehicle state;

  • Material selection and mechanism designs for durability, low weight, and simplicity;

  • Integration of the throttle and gear selection mechanisms with operator ergonomics.

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD&T;

  • Perform analyses, via hand calculations, kinematic simulations, and FEA, to validate designs;

  • Support and participate in testing activities – component, drive, and/or flight – as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications:


  • Bachelor’s degree in Mechanical or Aerospace Engineering and 5+ years technical work experience, or;

  • Master’s degree in Mechanical or Aerospace Engineering and 3+ years technical work experience.

  • Advanced SolidWorks experience – including SolidWorks Motion tool;

  • Demonstrated experience designing robust, lightweight mechanisms for vehicles including operator controls;

  • Expertise performing static and kinematic analyses for mechanical systems;

  • Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

  • Proven definition or production of manufacturing drawings including selection of dimension tolerances;

  • Familiarity with material selection to meet strength, weight, durability, and cost targets;

  • Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Familiarity with basic shop tools (hand, power, mill, lathe, etc.).


Highly Desired Qualifications


  • Hands-on experience installing automotive/aircraft throttle mechanisms, gear selectors, or propeller controls;

  • Proven ability to select appropriate bearing types/sizes, implement latches, and design linkages;

  • Familiarity integrating Hall Effect sensors, proximity, or contact switches to sense mechanism state (position);

  • Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD&T);

  • Background in designing with aerospace grade materials including fiber reinforced composites;

  • Exposure to ANSYS Workbench, FEMAP/NASTRAN, or any similar sophistication FEA software;

  • Familiarity with MSC Adams or similar sophistication rigid-body kinematics simulation software;

  • Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

  • Familiarity with 49 CFR 571 regulations;

  • Familiarity with ASTM F2245 regulations.



 
Job Number: 18-13347
Job Location: Burlington, MA
Rate: 105000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer Senior- contract injection molding

JOB DESCRIPTION
This role is on one of Insitu’s air vehicle teams. This role will work with other engineers and designers to achieve the goals of assigned programs and projects.
The air vehicle integrated product team (IPT) is in the process of evaluating and where feasible and cost effect converting parts to be injection molded.
The successful candidate will have a proven track record for taking parts from development to production with a complete understanding of the process, material selection, achievable tolerances, verification and validation methods associated with complex 3D geometries.

QUALIFICATIONS
•Experience with computer aided tools including both solid modeling and drafting packages is required. Experience with Solidworks is strongly desired.
Experience using FEA modeling tools is desired.
•Knowledge of manufacturing processes, materials science, and prototyping techniques is strongly desired.
•Ability to apply mechanical engineering theories to practical designs is required.
•Ability to establish test requirements from supporting documentation, test plans, internal and external customers is desired.
•Excellent verbal and written communication skills are required.
•Knowledge of injection molding process, materials and limitations is required.
•Knowledge of design and drafting methods including geometric dimensioning & tolerance is strongly desired.
•Knowledge of engineering tests techniques, methods, equipment and instrumentation is strongly desired.
•Knowledge of domestic and international regulations (e.g. FAA or DOD regulations) on the certification of test articles/vehicles to assure compliance of design is desired.

EDUCATION & EXPERIENCE
8 or more years in an engineering classification with a Bachelor's degree or 6 or more years in an engineering classification with a Master's degree.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APMECHENGR
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Seeking a Mechanical System Design Engineer

Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: CA
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: Mojave, CA
Rate: Up to $65.00-DOE
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanism Design Engineer - Interiors

Description:
Seeking an experienced Mechanisms Design Engineer focused on design, performance, manufacturing coordination, and installation integration of mechanism designs. The initial opportunity is related to interior seats, but there are many other opportunities to follow.

Responsibilities:

• Capable of creating design requirements, validating them, and decomposing them into an integrated verification plan for compliance/certification.
• Contribute to conceptual and preliminary design trades of varying complexity and document results of work
• Develop parametric CATIA V5 models that can be used to refine final mechanical designs
• Capable of interpreting engineering schematics to drive detail designs
• Works closely with prototype shop as well as production shop personnel to optimize design concepts
• Able to work closely with Industrial Design Engineers to integrate aesthetic and creative design requirements into design
• Supports the review of production planning and procedures to ensure compliance with design requirements
• Contributes to the creation of test plans in order to verify design intent, requirements and functionality
• Working knowledge of industry best practices; including design specifications (commercial and DOD), regulatory guidance (FAA AC), and aerospace recommended practices
• Expected to present work and technical findings to management and senior leadership through design reviews and program milestones where appropriate

Qualifications:

• BS in Mechanical/Aerospace Engineering or relevant engineering discipline
• 6+ years of experience in preliminary design, performance and/or integration of mechanical installations
• Experience with CATIA V5 and the CATIA kinematics tools
• Experience with Product Lifecycle Management tools
• Willingness to adapt and cross-train
• Strong team player with quality organization and pragmatic problem solving skills
• Expected to work independently as well with supervision given general guidance
• Experience with flight vehicles or vehicle systems certification to commercial standards (14 CFR Part 23 or 25) and/or military/government standards (DOD or NASA) is preferred


The Structures Company is an AA/EOE.
 
Job Number: 200
Job Location: CA
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Designer

Description:
NX Designer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-8 month W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Description:
-Proficiency with NX is required.
-Mechanical or Aerospace engineering BSME with 2 yrs min experience,
-efficient with part & assembly layout/ modeling capabilities using NX (V10),

Tasks could include:
-General model management
-Drawing creation/support
-Secondary hardware design
-Line routing and layout of secondary attach hardware (Structural, Avionics, Ordnance, Propulsion)
-Efficient with Geometric Dimensioning & Toleranceing
-Able to coordinate with other technical disciplines (Design, Strength, Avionics, Propulsion) and impacted sites (Production, Test House, etc.) to ensure final design meets all requirements.
-Proficiency with NX is required.

Requirements:
-Bachelor degree in Mechanical or Aerospace engineering
-2+ yrs engineering/design experience
-Proficiency with NX is required; version 10 highly preferred
-Efficient with Geometric Dimensioning & Toleranceing
 
Job Number: 8819
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 6-8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst II

Description:
PLM Configuration Analyst II

Savannah, GA
Long Term Contract
Pay Rate: DOE

1st Shift

Unique Skills:

Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required. Strong customer relationship management skills. Experience Requirements: Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design Essential Job Functions: PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:

Bachelor's Degree in Engineering, Computer Science or a related curriculum required or or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience. 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.). 1 year Database experience, data migration/conversion or related experience preferred..

Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Principle Duties and Responsibilities:

Essential Functions:

1. Execute plans, according to schedules, for engineering assignments. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Coordinate activities for lower level engineering staff assigned to specific projects. 4. Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements. 5. Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs. 6. Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action. 7. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 8. Develop system queries and utilities to support users information researches 9. Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems. 10. Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA. 11. Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting. 12. Ensure proper security, archiving and audibility of product releases. 13. Analyze, monitor and report business and system status metrics.

Additional Functions:

1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:

1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
Languages Required (in addition to English): None
 
Job Number: 8931
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Location: Savannah, GA
Pay Rate: $57/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
-Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Six (6) years of engineering or IT experience required.
-Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
-3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities/Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Direct activities for lower level engineering staff assigned to specific projects. 4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 6. Determine user needs and utilize system queries and utilities to support users information research. 7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems. 8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 8822
Job Location: Savannah, GA
Rate: 57
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy

Unique Skills:
• Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required.
• Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
• 3 years of Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Create plans according to schedules, for engineering assignments, and act independently to carry them out.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Direct activities for lower level engineering staff assigned to specific projects.
• Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Determine user needs and utilize system queries and utilities to support users information research.
• Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Design and develop business reports and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-237
Job Location: Savannah, GA
Rate: $57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FLIGHT TEST AIRCRAFT PROJECT LEAD

Description:
JSG is seeking a Project Manager - Aerospace for our client in Patuxent River, MD!

Description:

The Flight Test Aircraft Project Lead is responsible for the planning and execution of a flight test program.This includes, but is not limited to the following activities:
Development of an overall strategy and plan
Development of a detailed flight test schedule
Managing/tracking the status with respect to the Integrated Master Schedule milestones
Managing/tracking the status with respect to EVMS
Providing direction to Aircraft Test Directors to ensure timely completion of priority tasks.
Coordinating test program metrics for input for DFC and program management status reporting.
Coordinating resources required to accomplish program goals.
Assisting in program coordination tasks including scheduling of support facilities and other key assets.
Coordinating support requirements with other IPTs and maintaining interface with Company functional organizations and Government core competencies

Required Education & Experience:

***Candidate must have a degree from an accredited university in a related field
Masters Degree w/ 3 years' of professional experience
Bachelors Degree w/ 5 years of professional experience
Considered career, or journey level.
 
Job Number: 364995
Job Location: Patuxent River, MD
Per Diem: If qualified
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4

Description:
Packaging Design Engineer - Level 4

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 Month W2 Contract
Shift: First, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience **
-Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs.
-The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability.
-And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.

PRIMARY RESPONSIBILITIES:
(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives
(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.
(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.
(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.

Skills:
-CREO required
-WindChill strongly preferred
-5+ years packaging experience is a plus
-Familiar with ASTM standards for packaging, and shipping boxes is a plus.
-Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
-Strong communication skills.
-Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
-Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
-Networking & Information gathering skills
Education:
-B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience

Skills/Required
AEROSPACE DESIGN ELECTRONIC PACKAGING ASTM STANDARDS MIL-STDS CREO
 
Job Number: 8869
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Aerodynamics Engineer

Description:
Must have experience with C++, LINUX,CATIA,FORTRAN,CFD

Responsibilities:
Aerodynamicist with P&HQ. Main Purpose of the Role is experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, and thermal analysis. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support loads event simulation model development and validation of aerodynamic criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain aerodynamic databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Air Data Experience


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 142
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Seeking an experienced Aerospace Program Manager with a minimum of 10 years demonstrated experience in applying project/program management principles and processes in an aircraft development, testing and customer delivery environment. We need candidates with an entrepreneurial spirit, fueled by innovation, collaboration, with emphasis on forward thinking. will coordinate efforts related to the design, development, testing, proto‐typing, documentation, engineering outsourcing, flight testing, and FAA Part 400.

Qualified candidates will have experience successfully developing and managing projects in a fast-paced, deadline-driven aircraft or manufacturing environment. This Program Manager must have proven ability to successfully manage complex strategic projects that transitioned to production and customer delivery. You will need to be experienced in interfacing directly with customers as needed and executive leadership, as well as demonstrate an ability to balance technical knowledge and business acumen to manage this product. The right person will have a strong technical background in composite structures, avionics and mechanical systems, with experience leading and managing complex product or system developments.

Key Components
 Oversee and manage the development, implementation, testing, and integration of the air vehicle
 Act as the central focal point and authority for execution of the project tasks and goals
 Coordinate the engineering activities between the various engineering specialties within the product team
 Work closely with production management and engineering to continuously improve systems, processes, and production
 Formulate and clearly communicate overall program strategy, objectives, and plans, and leads team with clarity and purpose
 Monitor and report to management the progress of each functional element of the assigned product responsibility in terms of work, schedule and cost performance
 Track and manage the product engineering risks – identifies potential issues and problems that could impact program performance, and takes proactive action to resolve issues regarding cost and schedule

Key Requirements
Professional Requirements
 10+ years’ of specifically relevant experience
 Preference is for current experience as an air vehicle program manager
 Experience with management of aerospace research and/or development programs, as well as with aircraft production/manufacturing programs
 Demonstrated hands-on knowledge of aircraft structure, hardware components and subsystems is strongly preferred
 Strong experience resolving technical, schedule and cost problems related to the assigned program/product responsibility
 Effective leadership skills, including being an excellent listener and motivator
 Assertive self starter, with the ability to accomplish goals outside of their functional group
 Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.).Excellent organizational skills and problem solving skills
 Strong computer skills, including Microsoft Word, Outlook, Excel and Powerpoint
 Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15).

Educational Requirements
BA/BS degree required, MA/MBA/MS preferred


The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CA
Rate: DOE
Duration: Full-Time Position
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Scheduler (Business Analyst) CA

Description:
7668685
Job Title: Program Scheduler (Business Analyst)

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Aerospace Scheduling experience is required **



-Provide Detailed and summary schedules for the program.

-These schedules must be compliant with EVMS concepts and support uploading into the Integrated Program management tool.

-Weekly milestone statusing and development of an Integrated Master Schedule (IMS) will be required.



-Business Program Scheduler of the organizational unit operations.

-Provide schedule administration and fiscal integration of direct charging accounts and activities.

-Requirements include forecasting, critical path tracking, schedule statusing and analysis of future tasks.

-Integration of cost/schedule data to support Integrated Master Schedule and Customer directed Earned Value management reporting.

-Analyze data to evaluate performance against baseline and prepare a variety of reports to reflect schedule, earnings and variance analyses.

-Perform analysis of data and produce reports for administrative review.

-Prepare and present recommendations to management based on schedule planning data.

-Assist internal and external auditors regarding organizational units accounting, estimating and control procedures.

-May perform analysis of and/or assist in the preparation of departmental budgets.

-Ability to operate effectively in a team environment.





Skills:
Required:

-Proficient in Microsoft Project

-Knowledge of Earned Value Concepts



Desired:

-Ability to plan and manage complex tasks

-Prepares variance reports and anticipates problems and challenges in advance of them occurring



Keywords:

-IMS, EVMS, MS Project





Education:
Bachelor’s degree in an appropriate field

Skills:
Required
EARNED VALUE MANAGEMENTBUSINESS ANALYSISSCHEDULER/PLANNER
Additional
Languages:
English( Speak, Read, Write )
Minimum Degree Required: Bachelor's Degree

State/Province: California
City/Town: Canoga Park

Start Date: 03/12/2018 Hours Per Week: 40.00
Est. End Date: 03/12/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7668685
Job Location: Canoga Park, CA
Rate: 41/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
Windsor Locks, CT
12 month contract


Our client is looking for a Project Engineer with a background in Aerospace or Mechanical, with 5 years minimum of experience in Space, Aerospace or Defense.


Must have experience leading IPD Teams.. Must have experience with SAP and understanding or processing hardware in concert with SAP. The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.

• Planning, execution, coordination and communication of team activities and commitments
• Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
• Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
• Ensure targeted goals (schedule and cost) is communicated to the team members
• Identify, assess and manage the team’s risks
• Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
• Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
• Meet design and design-to-cost requirements.
• Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.

The candidates must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
Assist in creating program directives that define Earned Value Plans.
Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
Coordinate, track and support development and flight hardware build and test.
Initiate in scope engineering changes working with all functions to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support our client's electronic EC processes.
 
Job Number: 53404
Job Location: Windsor Locks, CT
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
We are looking for an experienced QA Engineer with at least 11 years of experience! We have a great opportunity for you to work with a well-known company in the aerospace industry! Do not miss the opportunity to take a step further in your career!

The ideal candidate for this position will perform the following tasks:
* Ensures quality maintenance and adherence to policies
* Frequent interaction with government inspectors, aircraft units and client production is expected.
* Performs assessments and audits on processes and procedures to ensure compliance to specifications.
* Utilizes lean initiatives to reduce waste and maintain continuous improvement.

Mandatory Qualifications and Experience:
* C-130, all systems qualified
* Experience as Quality / Collateral Duty Inspector or QC Analyst
* Must be able to obtain a secret clearance

Desired Qualifications and Experience:
* General knowledge of ISO 9001/AS9100 and DCMA INST 8210.1

The ideal candidate for this position will possess the following skills and characteristics:
* Ability to read, understand USAF Technical Data / Instructions and OSHA / HAZMAT requirements, client policies and procedures
* Able to analyze and resolve process issues varying from basic to moderately complex with minimal guidance.
* Proficient in Microsoft Office (i.e. Word, Excel, PowerPoint, etc.)
* Good communication skills (both oral and written)

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127622
Job Location: Fort Walton Beach, FL
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer (Aerospace)

Description:
Quality Assurance Engineer (Aerospace)

Location: Windsor Locks, CT
Pay Rate: $36/hr
Duration: 9 Month W2 Contract
Shift: First, 8:00am – 5:00pm
Travel: Local, Regional
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION; NO PER DIEM SPLIT**

Description:
Work with the assigned Quality Engineering Staff to:
• Review Supplier Pass Through First Article Inspection folders
• Assist in activities associated with supplier quality, warranty process, part purges and MRB activities
• Assist on Internal Quality Audits
• Perform RRCA for any quality issues within repair station via work flow.
• Support the corrective action board (CAB) and Relentless Root Cause & Corrective Action (RRCA) board.
• Assist processing warranty dispositions through SAP
• Update and maintenance of information technology quality tools (workflows, SharePoint sites, customer portal, SAP)
• Perform repair station manuals and procedures per request
• Coordinate with quality engineering and engineering the cost support quality efforts.

This position will also support the following:
• Ensure repair station is in compliance with all associated quality procedures and policies including quality requirements driven by the Customer & Regulatory Agencies (FAA/EASA/CAAC/CASE) and future regulatory agencies
• Support the quality clinic to ensure nonconforming material is flowing efficiently.
• Ensure quality metrics are updated and submitted to central quality, government agency (DCMA), and internal business unit.

Requirements:
-Bachelor's degree or higher required
-Must have 4-7+ years of experience within Quality is required.
-Candidate with Electronics or Electrical background is required.
-Experience with FAA Part 145 Repair station regulatory requirements and Code of Federal Regulations is highly desired.
-Experience in Microsoft applications: Excel, PowerPoint, Word, Access is required.
-Strong verbal and written communication skills is required.
-Past experience in an operations or manufacturing company is preferred.
-Experience with SAP is preferred
-Due to programs this position will be supporting, it requires US Citizenship.
- Flexibility and willingness to take on additional tasks outside of the core quality role is required
 
Job Number: 8804
Job Location: Windsor Locks, CT
Rate: 36
Per Diem: No
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term contract position

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Proficient in Catia, Smarteam and Solumina preferred.

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:
Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8873
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Unique Skills:
• Proficient in Catia, Smarteam. Solumina is preferred.

Education and Experience Requirements:
• Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
• Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
• Excellent communication and interpersonal skills required.
 
Job Number: 24-242
Job Location: Savannah, FL
Rate: 55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector

Description:
Basic Qualifications
-High School Diploma or GED from an accredited institution
-Minimum five (5) years’ inspection experience in an Aerospace environment
-Minimum three (3) years’ experience with AS9102 first article inspection
-No relocation benefit is offered for this position. Only candidates residing within 50 miles of Irvine, -CA will be considered for this position.

osition Criteria:
-Be familiar with and able to read and interpret drawings and engineering specifications
-Good verbal and writing communications skills in English
-Good interpersonal skills to establish and maintain effective intra and inter-departmental relationships at all levels
-Possess basic knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, blueprints, certifications of conformance, chemical and physical analysis reports and test reports
-Possess understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
-Possess knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4.
-Knowledge or experience inspecting aerospace products with special processes (e.g., anodizing, chem film, passivation, heat treating, penetrant and radiography, etc.)

Preferred Qualifications:
-Proficient using coordinate measuring machine
-CMM Programming experience

Essential Functions:
-Inspect subassemblies, and assemblies in the receiving, assembly, test, machining and shipping areas along with performing the more complex machined part and casting first article inspection to verify conformance to blueprints, engineering specifications and customer requirements
-Perform final dimensional or mechanical inspection of parts, components, subassemblies and assemblies for conformance to blueprints, engineering specifications and Customer requirements
-Use a variety of precision measuring instruments such as micrometers, vernier calipers, comparators and gauging equipment.
-Assist with devising dimensional gauging set-ups, perform part layout inspection and assist in establishing part inspection procedures
-Report possible nonconforming material
-May be required to audit test and assembly processes.
-May be required to interface with various customers or government representatives
-Process and complete required quality documentation
-Perform complex first article inspection on components, sub-assemblies and assemblies to AS9102 requirements
-Surface plate layout inspection
-Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.
-Discuss with or refer major or critical inspection problems or decisions to lead person or supervisor for disposition
-Cross train on the inspection of different products
-Perform other related duties as assigned
 
Job Location: Irvine, CA
Rate: $25
Per Diem: No
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
Location: Pomona, CA
Rate: $43.56/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: No
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description:
Our client is currently seeking a highly motivated, Receiving Inspector to join their team working in a hands-on, collaborative environment. The successful candidate must be familiar with a manufacturing environment, have computer knowledge, a self-starter who pays attention to detail and accuracy and taking responsibility for his/her work.

Responsibilities include:
- Perform receiving & 1st article approval of manufactured/assembly, verification of processes as required to assure drawing and material specifications for mechanical components (i.e. board, circuits, and wiring).
- Provide input to improve quality procedures. Inspection of products, material and generate Inspection Records in accordance with the AS9100 Specification.
- Ensure nonconforming material is isolated from acceptable parts and is properly documented and controlled; and in accordance with client/Customer's procedures.
- Perform incoming inspection and lot processing using our ERP system SAP.
- Perform presentation of compliant parts to operations assembly staff.
- Work with Quality Management and Procurement to drive payment support with data collected from above inspection actions.
- Interface with personnel within manufacturing and other internal departments.

Requirements:
- US Citizenship required
- Minimum of 3+ years’ experience in quality inspection and disposition
- Minimum of 3-5 year in a manufacturing environment
- Direct experience with Inspection and testing of Military or aerospace hardware including reviewing testing procedures and drawings required.
- Controls and Instrumentation, Manufacturing Inspection Experience, Quality, Inspection Tools, Tooling, Safety Management, Quality Focus, Judgment, Decision Making.
- Must be computer literate (comfortable accessing computer databases and entering data).
- Ability to multi-task and prioritize.
- Ability to work independently as well as a team player.
- Able to read basic written instructions and follow verbal instructions.
- Quick learner with strong attention to detail
- Must have the ability to work with others in a fast-changing environment.

Education:
High School Diploma Required.
 
Job Number: 8858
Job Location: Pomona, CA
Rate: $43.56/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Scrum Master (Hood River, WA)

Description:
Scrum Master

JOB DESCRIPTION
Seeking a person who is an energetic experienced scrum master and is flexible and agile.
Responsibilities:
• Facilitates and removes roadblocks for agile team
• Holds and manages daily agile meetings
• Manages agile process for team
• Communicates to product owner dependencies and process risks
• Delivers written and verbal communication of agile status and process to all roles in organization
• Manages external artifacts and reporting quality and resource measurements

QUALIFICATIONS - Must have experience with:
• Handling multiple projects, codebases, and concepts with professionalism and ease
• Agile process management as a scrum master
• Producing concise well written communication for status
• Delivering detail oriented and disciplined organization reports
• Prefer candidates with experience in remote sensing data.
Additionally, it is nice to have experience with:
• Scaled Agile Framework
• Atlassian toolset (JIRA and Confluence)
• BitBucket, Jenkins and TeamCity

EDUCATION & EXPERIENCE
This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
Typical experience: 3+ years in an engineering classification with a Bachelor's degree or 1-3 years of experience in an engineering classification with a Master's degree.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APSCRUM
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Test Engineer - Secret Clearance

Description:
***Must have ACTIVE SECRET Clearance***

Develop, administer, operate, and maintain an Aerospace (GPS-related) SW Quality Assurance system in Clifton, NJ.

Job Description:
• Take the lead and ownership of QA processes and procedures and ensure conformance to established company, contractual, and regulatory standards
• Conduct audits and proficiency testing; recommend implementation of preventive measures and corrective action to ensure non-recurrence of deficiencies
• Perform development and execution of Software Quality methods and processes
• Responsible for performing tests, test methods, and test procedures to ensure continuous improvement to Software Quality Assurance standards
• Implements and defines testing methodology and standards to improve results
• Creates and maintains documentation of test results to assist in debugging and modification of software
• Analyzes test results to ensure existing functionality and recommends corrective action
• Consults with senior testers and development engineers to help resolve issues
• Ongoing work towards improving the test process is also expected
• Communicate effectively, both written and oral

Technologies:
C#
XML scripting
GPS
ON Orbit Handbook (OOH)
ClearCase
ClearQuest
Client/Server Architecture

Misc:
Please note that the schedule may vary and significant overtime is expected (40-80 hours per week depending on project needs, often on 2cd/3rd shift). This position is strictly W2 Non-Exempt.
 
Job Number: 18-09527
Job Location: Clifton, NJ
Rate: 55-80
Per Diem: Split
Overtime: Yes
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Firmware Engineer

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

Firmware Engineer
To work on a 6-9 month contract in Gig Harbor, WA

Responsibilities:
• Design, develop, code, test and debug system software.
• Interface with hardware design and development.
• Analyze and enhance efficiency, stability and scalability of system resources.

Experience Requirements:
• Related Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or equivalent;
• 3-5 years’ experience developing real time embedded software;
• Proficiency with C, C++;
• An understanding of the prototyping and reverse engineering method of developing and certifying avionics;
• Familiar with source control and issue tracking systems;
• Willingness to follow rigorous processes for designing, implementing and testing code (DO-178B/C desired)
• Experience with DOORS, TI ARM processors, and Code Composer Studio desired;
• Ability to collaborate, innovate and bring technical zeal;
• Passion for aviation and familiarity with rotorcraft a plus!
 
Job Number: 583
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: May 15, 2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer (contract)

Description:
Design, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.

Conduct multidisciplinary research and collaborates with Equipment Designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.

Determine end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.

Design and implement build procedures that are used to support hardware and software product development and use.

Educational Requirements:

BS in Software Engineering or Software-related discipline

Required:

A minimum of 10 experience as a Software Engineer in an Aerospace company.
 
Job Number: 42024
Job Location: Windsor Locks, CT
Rate: Good $$$$
Per Diem: yes
Overtime: yes
Duration: 8 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane Rochford
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with five year re-investigation CA

Description:
161491
Requirement #AERO-REQ-0774
Work Location Palmdale, CA
Work Week 9/80

Number of Resources 1
Security Clearance Secret (Prime Contract:P-16 - investigation within 5 years, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Job Description

Title Software Engineer
Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance with a five year re-investigation. PAR required

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with five year re-investigation.

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering

Interview Required Yes

Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0774
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Control Engineer

Description:
Responsibilities:
Develop Flight Control Laws and control algorithms to meet vehicle performance, flying qualities, and stability margins on ground and in flight.
Support definition of Flight Control System specifications and requirements and Flight Control Law requirements for handling qualities, sensors, actuators, and controllers.
Design, develop, and test autopilot and associated logic functions.
Develop modeling and simulation of dynamic systems
Develop six-degree-of-freedom (6DoF) digital simulation models and computer code.
Conduct engineering analysis, studies, and performance assessments.
Integrate models into software and hardware-in-the-loop simulation environments.
Verify and validate Flight Control Systems through testing in desktop simulation environment, systems integration labs, aircraft flight test, and aircraft/system qualification and certification activities.
Perform hardware / software integration and testing on flight simulator devices, including pilot in the loop testing.
Support analysis of system architecture, redundancy management, electronic hardware design and integration, and actuator design and integration.
Support development of Operational Flight Program software.
Work closely with engineers of varying disciplines and aircraft Subject Matter Experts to meet flight simulator regulatory and customer training requirements
Participate in engineering design reviews.
Keep current on future technologies and products
Analyze air vehicle flight test data and support flight test activities

Requirements
8 years’ or more experience in flight control law development for aerospace vehicles.
· Knowledge of aircraft and aerospace systems with emphasis on flight dynamics, propulsion and ground reaction forces.
· Knowledge of reversible and irreversible flight control systems.
· Knowledge of MIL-HDBK-1797, MIL-F-8785C; MIL-F-9490D; DO-178B
· Simulation Experience
· Experience with planning and conducting flight tests, and post test data evaluation.
Excellent verbal and written communication skills
Excellent Organizational Skills and problem-solving skills
Strong team player
Excellent computer skills, including word, excel and powerpoint
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA is highly desired

Education/Certifications Required:
BS or MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering (or related field).


Must have simulation and Flight Control Law Development Experience
Knowledge of aircraft and aerospace systems with emphasis on flight dynamics
Knowledge of reversible and irreversible flight control systems.
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran

The Structures Company is an AA/EOE.
 
Job Number: 160
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
Sr. Mechanical Engineer
Wilsonville, OR
6 month contract



The Manufacturing Engineering team is responsible for all mechanical engineering tasks related to the test and process flow of aerospace head-up display and guidance products. This position requires knowledge of engineering theory and principles to determine packaging solutions for electronic, electromechanical and optical test equipment. Our engineers are responsible for ensuring products are safe and comply with our client's standards.

Job Responsibilities
•Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable
•Perform autonomously under the direction of team leaders, program management and engineering management
•Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach
•Contribute to schedule creation and ensure schedule commitments are met
•Create and present program and/or task status presentations to team members and engineering management
•Create and present clear and concise technical descriptions to engineering leadership and customers
•Mentor junior engineers and provide guidance to design manufacturing team members
•Provide input to design and document reviews
•Spearhead investigations for open ended complex problems
•Develop detailed hardware requirements based on product theory, system level requirements and customer requirements
•Complete designs that meet documented hardware requirements
•Create test procedures to support the testing of products to industry and government standards
•Review hardware defects and identify systemic root causes and process improvements

Basic Qualifications
•Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering
•Experience in mechanical engineering design and development
•Knowledge of engineering materials and processes
•Experience with structural and thermal management design
•Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)
•Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
•Strong technical, analytical and problem solving skills
•Ability to effectively communicate throughout all levels of the organization

Additional skills or experience a plus:
•Packaging of electronic and/or precision optical systems
•Design of manufacturing, calibration and test support equipment
•Aluminum fabrication techniques including: machining & investment casting
•Experience in avionics or aerospace industry
 
Job Number: 53738
Job Location: Wilsonville, ORE
Rate: 45.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Network Administrator

Description:
Sr. Network Administrator

Location: Orlando, FL
Rate: $50/hr
Duration: 6 Month W2 Contract, 9/80
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
A major aerospace company is looking for a temporary Network Administrator to act as network architecture specialist for IT systems across two geographic locations. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

Skills Required:
Maintains technical expertise in all areas of networks and computer hardware and software interconnection and interfacing, such as routers, switchers, firewalls, hubs, bridges, gateways, etc. Prepares or ensures that appropriate network documentation exists, including operational instructions. Provide monitoring, maintenance and advanced support of voice, data, and/or video communications networks across the enterprise. Participates in major network installations and upgrades.

Desired:
-7 years of overall experience preferred.
-5+ years of Cisco experience, preferred CCNP, or higher.
•5+ years of experience as a System Administrator or similar role
•In depth knowledge of WAN/LAN, to include Cisco-based routers, switches, and firewalls
•In depth knowledge of network technologies and protocols including Trunking, VTP, Layer 2 & 3 Port-channels, Port-Security, EIGRP, OSPF, QoS, BGP, and MPLS.
•Operating Systems: Cisco IOS, Microsoft Windows, Linux, Unix
•Applications/Technologies: Active Directory, Wireshark Microsoft Exchange, Sophos UTM, VOIP
•Experience with Unified Threat Management solutions (Firewall, IPS, Web Proxy, etc)
•Security Information Event Management (SIEM) implementation and operation
•Interfaces with vendors to ensure appropriate resolution during network outages or periods of reduced performance.
•DoD 8570.1 compliant certification (e.g. Security +, CISSP, etc.)
•Ability to work overtime and weekends required on occasion

Education:
BS in Information Technology or related field required

Certifications/Licenses:
CCNP
CISSP

Required Skills:
ACTIVE DIRECTORY BGP CCNP CISCO EIGRP
 
Job Number: 8886
Job Location: Orlando, FL
Rate: 50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer (Aerospace)

Description:
Sr. Systems Engineer (Aerospace)

Location: Canoga Park, CA
Pay Rate: DOE ($55/hr - $64/hr)
Duration: 1 Year W2 Contract
Shift: First
Travel: Limited travel to the multiple test sites will be required.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
-Position is for a senior engineer to support development, qualification, and acceptance testing for RS-25 Liquid Rocket Engine Program.
-This position requires knowledge and experience with rocket propulsion systems, data analysis, systems integration, and test planning.
-Tasks include development of test plans, development of test procedures, data analysis, generation of technical documents, preparation/presentation of technical briefings to internal/external customers.
-Under general direction, the Senior Engineer determines approaches to objectives demonstrating an in depth understanding and application of principles concepts and practices.

Breakdown:
90% - The candidate will be required to operate under limited supervision after receiving direction from the the Integrated Product Team Lead and Systems Development Lead. The candidate will be expected to support coordination activities regarding meeting test objectives to develop, qualify and accept the RS-25 liquid rocket engine for flight duty. This includes developing a thorough understanding of the rocket engine systems and test facility systems. The position coordinates the integration of all component and system engineering support for hardware and software. The position leads the post engine test data analysis and any potential anomaly resolution. The position coordinates, prepares, and presents hardware acceptance reviews to the customer. The candidate will be responsible for generating and briefing of technical documentation including specifications, software requests, data review, test readiness reviews, anomaly reports, hardware acceptance reviews, and test report documents.
10% - Limited travel to the multiple test sites will be required.

Skills Required:
-Mechanical Systems Integration, Mechanical Systems Testing, Data Analysis, Test Planning
-Aerospace systems engineering experience

Desired:
-Requirements definition & verification, liquid rocket engine test experience, experience with LOX & LH2 propellants, experience with rocket engine assembly

Education:
Bachelors of Science in Mechanical Engineering, Aerospace Engineering or related field and a minimum of 5 years of experience.
 
Job Number: 8830
Job Location: Canoga Park, CA
Rate: 55-64
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

**CONSTRUCT AND ANALYZE FINITE STRUCTURAL MODELS, USING ABAQUS**
**PERFORM DETAILED ANALYSIS USING CLASSICAL ANALYSIS AND FEA METHODS** **WORKING KNOWLEDGE OF CATIA V5**
**MUST have a Bachelor's Degree**
**MUST be a U.S. Citizen**
**MUST have 5+ years of experience with Landing Gear**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8936
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Fort Worth, TX
Rate: $65.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.Must be able to verify U.S. Citizen status.
 
Job Number: 8687
Job Location: Fort Worth, TX
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8686
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer II (Fatigue & Damage Tolerance)

Description:
Position Summary: Under the direction of the Engineering manager, supervisor or lead this position will work with the Engineering team to ensure successful integration by providing stress analysis on engineering designs for components, systems and products using mathematical formulas and computer-aided engineering (CAE) systems. The Stress Engineer II will work both independently as well as part of a team to complete specific projects related to both commercial and military aircraft components to determine stress requirements of a product. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Fatigue & Damage Tolerance Engineer II will work with a low level of supervision and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Perform fatigue and damage tolerance assessment of metallic structure
Make analytical fatigue life predictions
Perform crack growth and residual strength analysis using NASGRO
Develop fatigue spectrums and support fatigue and damage tolerance testing
Make recommendations on design improvements related to fatigue and damage tolerance
Analyzes engineering designs, schematics, and customer specifications to determine stress requirements for a product.
Formulates mathematical analysis or finite element model of product.
Prepare preliminary stress analysis reports and provide information to supervisor or lead.
Capable of airframe structural analysis for fatigue stresses.
Perform structural analysis on conceptual layouts as well as detail components.
Consult with Design Engineer to assess design modifications of product based on results of analysis.
Will focus primarily on existing products and processes.
Ability to perform classical hand stress calculations, finite element analysis utilizing finite element software such as NASTRAN or ANSYS.
Participates with other staff to contribute to project completion.

Qualifications & Skills Requirements:

Requires a bachelor’s degree in engineering and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Intermediate knowledge of finite element modeling, and familiarity with MS Office products.
Basic knowledge of CATIA V5, NASTRAN, and NASGRO.
Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.


The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 7877
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer / no clearance / candidates with recent ANSYS Structural Analysis experience URGENT CA

Description:
160343/7441118

Job Title: Structural Analysis Engineer

Additional Information: Candidates needed! Manager is interviewing. Must have recent Aerospace structural analysis experience using ANSYS. See job description for other requirements.

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).

-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.



Number of Positions: 4

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).



-Prefer candidates with stable work histories (are not “job hoppers”).



-Master’s degree strongly preferred.



The selected candidate will:

Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.



Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as ANSYS is required.

-Knowledge and experience with aerospace product development efforts is desired.

-Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.



Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.

-Master’s degree is strongly preferred.

Skills:
Required

ANSYS AEROSPACE STRUCTURAL ANALYSIS FINITE ELEMENT ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 04/01/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7441118
Job Location: Canoga Park, CA
Rate: 65-75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Previous extensive composite lay-up, fabrication experience preferred.
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic structures (fuselage, wing, empennage).
- Experience reviewing supplier non-conformances a plus.
- Experience should be in a Production and/or schedule driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength / stiffness of surrounding structure while in a schedule driven environment.
- Strong written / verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel, Solumina)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8912
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract Position

***MUST be a U.S. Citizen or Permanent Resident***

Required Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)
- Typically a 5-8hr day work week, with some scheduled weekend OT a possibility.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.

2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8790
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract


****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Prior 2nd Shift experience desired.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8443
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer (Western JAPAN)

Description:
The position will serve as Supplier Quality Engineer based at a Supplier of commercial aircraft assembly / fabrication programs in Western Japan.
Capable of performing Material Review Board activity as a Quality representative.
Lead Supplier Corrective Action Board. Proactively identify and implement Supplier Quality Improvement.
Ability to analyse material flow/internal logistics and identify new process' and manufacturing opportunities for continuous improvement.
Support AS9102 First Article Inspection creation and review for the Supplier.
Will be required to perform quality audits at the Supplier. Issue corrective actions and support the supplier in resolution of corrective Actions as required from escapes, non-conformances, and audits. Support customer audits of the supplier as required.
Utilise inspection tools and media to validate supplier compliance with Engineering requirements, including support for source inspection and driving the supplier toward delegated inspection status.
Qualifications
Japanese and English speaker who is culturally sensitive to communicating and operating in a Japanese work environment.
Bachelor’s degree or equivalent with a concentration in manufacturing engineering.
6+ years of experience in aerospace quality for assembly, fabrication or manufacturing engineering.
Lead auditor certification.
Lean and Six Sigma Certifications or equivalents
Must be able to work and travel independently or collaborate with diverse teams and achieve results.
Should be able to interpret 3D model based definitions and familiar with GD&T
Should be proficient in SAP
Must be proficient MS Word, MS Excel, MS PowerPoint, MS Project, MS Access, MS Excel, SharePoint.
Ability to travel (Domestic Japan and International) approximately 25%
 
Job Number: JOKB876
Job Location: JAPAN
Rate: TBD
Per Diem: TBD
Overtime: No
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: GTM
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer (Western JAPAN)

Description:
The position will serve as Supplier Quality Engineer based at a Supplier of commercial aircraft assembly / fabrication programs in Western Japan.
Capable of performing Material Review Board activity as a Quality representative.
Lead Supplier Corrective Action Board. Proactively identify and implement Supplier Quality Improvement.
Ability to analyse material flow/internal logistics and identify new process' and manufacturing opportunities for continuous improvement.
Support AS9102 First Article Inspection creation and review for the Supplier.
Will be required to perform quality audits at the Supplier. Issue corrective actions and support the supplier in resolution of corrective Actions as required from escapes, non-conformances, and audits. Support customer audits of the supplier as required.
Utilise inspection tools and media to validate supplier compliance with Engineering requirements, including support for source inspection and driving the supplier toward delegated inspection status.
Qualifications
Japanese and English speaker who is culturally sensitive to communicating and operating in a Japanese work environment.
Bachelor’s degree or equivalent with a concentration in manufacturing engineering.
6+ years of experience in aerospace quality for assembly, fabrication or manufacturing engineering.
Lead auditor certification.
Lean and Six Sigma Certifications or equivalents
Must be able to work and travel independently or collaborate with diverse teams and achieve results.
Should be able to interpret 3D model based definitions and familiar with GD&T
Should be proficient in SAP
Must be proficient MS Word, MS Excel, MS PowerPoint, MS Project, MS Access, MS Excel, SharePoint.
Ability to travel (Domestic Japan and International) approximately 25%
 
Job Number: JOKB876
Job Location: JAPAN
Rate: TBD
Per Diem: TBD
Overtime: No
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: GTM
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Mgmt Analyst's (30+ Openings Auburn, Everett, Renton - AP)

Description:
Supply Chain Mgmt Analyst’s (40++) needed for a contract opportunity with Yoh’s client located in Everett, Auburn, Renton, WA

The Big Picture – Top Skills Should You Possess:
• Incorporates change and planning decisions to arrive at optimal solutions. Applies Supply Chain Management (SCM) methodologies to ensure coordination in the global supply chain..

What You’ll Be Doing:
• Analyzes complex material requirements. Verifies and incorporates Bills of Material/schedules into a production plan.
• Determines part number attributes. Initiates, coordinates and authorizes release of orders by evaluating system requirements and resource availability. Ensures on-time delivery. Documents and resolves order delinquencies. Reports schedule adherence issues.

What You Need to Bring to the Table:
• Develops and controls inventory plans. Optimizes inventory levels. Analyzes and dispositions excess inventories.
• Initiates audits. Develops and creates schedules for products and services. Assists in developing estimates and schedules for new business proposals.
• Implements and maintains process improvements by analyzing and establishing best practices for materials management to improve SCM performance.
• Works under general direction.
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APSUPCHA
Job Location: Auburn, WA
Rate: $30.00 - $33.00
Per Diem: None
Overtime: Possible
Duration: 6 months plus
Start Date: 04-27-2018
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Mgmt Analyst's (30+ Openings Everett, Renton, Auburn, - AP)

Description:
Supply Chain Mgmt Analyst’s (40++) needed for a contract opportunity with Yoh’s client located in Everett, Auburn, Renton, WA

The Big Picture – Top Skills Should You Possess:
• Incorporates change and planning decisions to arrive at optimal solutions. Applies Supply Chain Management (SCM) methodologies to ensure coordination in the global supply chain..

What You’ll Be Doing:
• Analyzes complex material requirements. Verifies and incorporates Bills of Material/schedules into a production plan.
• Determines part number attributes. Initiates, coordinates and authorizes release of orders by evaluating system requirements and resource availability. Ensures on-time delivery. Documents and resolves order delinquencies. Reports schedule adherence issues.

What You Need to Bring to the Table:
• Develops and controls inventory plans. Optimizes inventory levels. Analyzes and dispositions excess inventories.
• Initiates audits. Develops and creates schedules for products and services. Assists in developing estimates and schedules for new business proposals.
• Implements and maintains process improvements by analyzing and establishing best practices for materials management to improve SCM performance.
• Works under general direction.
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APSUPCHA
Job Location: Everett, WA
Rate: $30.00 - $33.00
Per Diem: None
Overtime: Possible
Duration: 6 months plus
Start Date: 04-27-2018
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: George Pullen
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Mgmt Analyst's (30+ Openings Renton, Auburn, Everett - AP)

Description:
Supply Chain Mgmt Analyst’s (40++) needed for a contract opportunity with Yoh’s client located in Everett, Auburn, Renton, WA

The Big Picture – Top Skills Should You Possess:
• Incorporates change and planning decisions to arrive at optimal solutions. Applies Supply Chain Management (SCM) methodologies to ensure coordination in the global supply chain..

What You’ll Be Doing:
• Analyzes complex material requirements. Verifies and incorporates Bills of Material/schedules into a production plan.
• Determines part number attributes. Initiates, coordinates and authorizes release of orders by evaluating system requirements and resource availability. Ensures on-time delivery. Documents and resolves order delinquencies. Reports schedule adherence issues.

What You Need to Bring to the Table:
• Develops and controls inventory plans. Optimizes inventory levels. Analyzes and dispositions excess inventories.
• Initiates audits. Develops and creates schedules for products and services. Assists in developing estimates and schedules for new business proposals.
• Implements and maintains process improvements by analyzing and establishing best practices for materials management to improve SCM performance.
• Works under general direction.
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APSUPCHA
Job Location: Renton, WA
Rate: $30.00 - $33.00
Per Diem: None
Overtime: Possible
Duration: 6 months plus
Start Date: 04-27-2018
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer

Description:
System Engineer reports to the Engineering Manager, the System Engineer will utilize aircraft development expertise to participate in the design of new products, solve systems engineering problems, develop and execute objectives for self and others, and have the ability to effect short-term and some long-term business goals within the aviation industry.

JOB RESPONSIBILITIES

• Captures, understands and documents the customer's system requirements (design, structural, materials & processes, flammability, electrical, mechanical systems etc.
• Designs systems architectures in co-operation with aircraft manufacturers
• Performs interior systems analysis, modelling and simulation
• Performs system safety analysis, including hazard assessment and fault tree analysis
• Develops requirements for systems test facilities
• Defines aircraft installation requirements for avionics
• Participates in Product Release Board Technical support of product trials and pilots
• Prepares and initial performance of Acceptance Test Procedures (ATPs)
• Creates functional product specifications
• Performs other related duties as required
• Day to day job includes understanding the requirements and configuration from the customer and flow it down to each disciplines under certification for on-time cert activities.

Bachelor's degree (BA/BS) from four-year college or university in Mechanical, Aerospace, Structural, or Electrical; and a minimum of three years related experience and/or training; or equivalent combination of education and experience.
• Prior experience as a system engineer. Design engineering and configuration management background are beneficial.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Administrator

Description:
Our client is looking for a hard working, self motivated Systems Administrator that takes pride in their work! If you are interested in working with a well-known company in the aerospace industry with the chance to become a permanent employee, this is a great opportunity for you!

The ideal candidate for this position will perform the following tasks:
* Set up administrator and service accounts
* Maintain system documentation
* Tune system performance
* Install system wide software
* Interact with users and evaluates vendor products
* Make recommendations to purchase hardware and software
* Coordinate installation and provides backup recovery.
* Develop and monitor policies and standards for allocation related to the use of computing resources.

Mandatory Qualifications and Experience:
* System / Server Administration
* Must be able to obtain a secret clearance

Desired Qualifications and Experience:
* Network Monitoring / Troubleshooting
* Data Storage
* Exchange
* Lync
* VMWare
* Certificate Services
* Mobile Device Management
* Reverse Proxy Services

The ideal candidate for this position will possess the following skills and characteristics:
* Must have at least one of the following skill sets (along with the experience and credentials to match): Enterprise Storage Management (e.g. NetApp, 3PAR, etc), Microsoft Exchange, and / or Internet Information Services (IIS).

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127618
Job Location: Lexington, KY
Start Date: 5/21/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.


EBAS - Electronic Bleed Air System

Control Systems Testing – HW/SW Integration Lab-based Testing of the 777X EBAS, includes system-level testing, Built-In Test focus (fault detection and analysis of impact of failures) analysis of requirements and how they may relate to already-defined failure modes, updating requirements based on test results (Customers Change Requests and DOORS updates).


Senior Systems Design Engineer - Complex control system design and development - Complex diagnostic system design - Extensive experience in requirement management - DOORS experience - Thermal mechanical system knowledge - Aerospace applications experience - Knowledge of aerospace development standards - 10+ years of Systems Engineering experience for aerospace applications (Senior Engineer level experience & knowledge)

Location is Mississauga, ONT (suburb of Toronto).
 
Job Number: WW032818WHC
Job Location: Canada
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 6 months
Start Date: April 15
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer
East Aurora, NY
12 month contract




SUMMARY or MAJOR FUNCTION OF THE JOB

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.



PRINCIPAL ACCOUNTABILITIES or KEY RESULTS OF THE JOB


Systems Engineering
1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.


Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.


Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES
• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.


QUALIFICATIONS THAT ARE DESIRABLE AT JOB ENTRY or NEEDED FOR BEGINNING EFFECTIVENESS IN THE JOB
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: 53584
Job Location: East Aurora, NY
Rate: $75
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 5

Description:
Seeking a Systems Engineers 5 located in El Segundo, CA - Requires Active TS Clearance

RESPONSIBILITIES:
Senior Systems Engineer (Level 5) for the Mission Framework and Analytics (MF/A) Spacecraft Control Element (SCE) organization, supporting proprietary ground system development programs in a leadership role. The position is located in El Segundo, California with some support at the Seal Beach, California location.

The product engineer leads team members in gathering requirements pertaining to the constraints, standards, and strategy from all the stakeholders of a program. Leads team members in identifying and defining ground system capabilities both operational and functional. Conducts trade studies to determine system feasibility required to meet collected requirements. Leads team members in quantifying and reviewing performance requirements to determine internal consistency and feasibility and to ensure customer needs are met. Mentors team members. Leads and participates in reviews of program requirements to ensure all requirements are defined and met.

Primary Responsibilities:
o Lead team members in the analysis of performance and suitability of system components by developing and integrating performance budgets, and evaluating measures of effectiveness.
o Lead team members in establishing requirements and deliverables for modeling/simulation and analysis activities.
o Lead team members and ensures the alignment between Integration Verification and Validation (IV&V) plans with architecture capabilities and performance to achieve consistency in engineering approach, to mitigate risks associated with architectural decisions, and to meet customer expectations.
o Mentor team members in the analysis of system performance.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.


REQUIRED EXPERIENCE:
Required Skills:
o Experience in ground system systems engineering, including requirements analysis, design, and operation.
o Leadership experience in software integration and testing.

Preferred Skills:
o Leadership background in integrated systems for space mission management and command & control.
o Familiarity with Government programs & processes.
o Excellence in technical communication (written and verbal).

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:
Full-Time/First Shift
8 AM - 5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 169746
Job Location: El Segundo, CA
Rate: $98.25-$109.20
Per Diem: Yes
Overtime: Yes
Duration: 10 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer NY

Description:
Request number: 5244
Date created: 03/16/2018
Job title: Systems Engineer
Number of openings: 2
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA

Maximum Hourly Pay Rate: 85/hr
Start Date: 03/26/2018
Tentative End Date: 03/29/2019

Job Description
Function:
1. SUMMARY or MAJOR FUNCTION OF THE JOB
The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.
2. DIMENSIONS THAT SHOW THE RELATIVE SIZE AND SCOPE OF THE JOB WITHIN MOOG
Exercises Significant, but not Controlling, Influence:
Personnel: Total of 3 personnel
Annual Sales to External Customers: US$0 to $1,000,000 (Assigned Project Value)
3. PRINCIPAL ACCOUNTABILITIES or KEY RESULTS OF THE JOB

1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.
Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.
Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES

• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.
5. QUALIFICATIONS THAT ARE DESIRABLE AT JOB ENTRY or NEEDED FOR BEGINNING EFFECTIVENESS IN THE JOB
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: MB-5244
Job Location: East Aurora, NY
Rate: 85/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineering Manager

Description:
Systems Engineering Manager

Thie successful candidate will be joining the development team.



Job Responsibilities

  • Lead the Systems Engineering function and team as it enters production phase;

  • Partner with external developers to develop and verify systems through integration and test;

  • Perform functional hazard analysis and simulation, gather data, perform DFMEAs to down-select among alternative architectures based on cost, reliability, safety, and functional requirements;

  • Design systems that are resistant to failures, noise, and parameter variation;

  • Plan, estimate, sequence, and measure the completion of work according to targets and metrics;

  • Elicit, document, and review requirements from all stakeholders: FAA, NHTSA, functional, DFX;

  • Generate and manage the product system-level requirements and architecture documents;

  • Architect data flow diagrams and subsystem interface control documents (ICDs);

  • Allocate requirements to architecture and subsystems and manage integration and validation;

  • Work across electrical, controls, software, mechanical, and power electronics engineering functions to develop product capabilities;

  • Design test-beds or simulations to develop system capabilities prior to vehicle integration;

  • Allocate and manage cost, weight, technology readiness Level (TRL), and reliability metrics;

  • Write test plans, coordinate tests, and document results including HALT and corner-conditions;

  • Manage closed-loop controls development software, sensors, actuators, and user interfaces including state machines, data flow, timing diagrams, fault detection, and recourse;

  • Work with software engineers to implement control laws into embedded controllers.


Qualifications


  • Excellent written and verbal communication skills, as well as presentation skills;

  • Bachelor's degree in Engineering;

  • New Product Development (NPD) and gate review process experience;

  • Outstanding organization, analytical, innovation, and problem solving skills;

  • FAR Part 23 system development process experience (aviation/aerospace);

  • Ability to manage a team;

  • Time and frequency domain math modeling, aliasing, stability;

  • Understanding of power, energy, HEV topologies, actuators, sensors, human-machine interface;

  • Methods: function flow, use case analysis, state machines, timing diagrams, data flow;

  • Process templates: DOD 498, ARP 4754, INCOSE Systems Engineering Handbook, V-Model;

  • Ability to use Microsoft Excel, Word, PowerPoint, and MATLAB;

  • Holds a valid US driver's license.


Highly Desired Qualifications


  • Master's degree in Engineering;

  • Automatic code generation;

  • Automotive control system development;

  • Formal Systems Engineering training or certification;

  • Closed loop multi-variable classical, state-space, and non-linear control theory ;

  • Experience with triple- and quadruple-redundancy methods for controllers and software;

  • Requirements management software such as DOORS, Code Beamer, Team Center, or other;

  • Managed release process, design review checklists, and change management;

  • PMP, project management, supervisory, or team leadership experience;

  • Lab equipment: oscilloscopes, data acquisition, hi-pot, spectrum analyzers;

  • DFSS, Design of Experiments, Axiomatic, P-Diagrams;

  • Filtering and Digital Signal Processing;

  • C programming.



 
Job Number: 18-13614
Job Location: Woburn, MA
Rate: 135000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Deborah Allaire
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Data Designer II (CH-47 Publications/Maintenance) (Aircraft/Aerospace)

Description:
Technical Data Designer II (CH-47 Publications/Maintenance) (Aircraft/Aerospace) – We seek several Technical Data Designers for positions within the Aircraft/Aerospace industry at Ft. Walton Beach, FL.

These are long term, 12+ month contract opportunities.

Active Secret Clearance NOT REQUIRED to Start.

Rotorcraft Maintenance experience and H47 experience desired. Microsoft Office and Technical Publications authoring skills desired. S1000D experience desired. Fighter aircraft maintenance experience will be considered.

Develops multiple publication elements for all levels of maintenance for a fielded equipment minor system or multiple sub systems. Collects, researches and analyzes source data and validates source data based on predefined and developed assumptions. Estimates the impact of the proposal or changes to the publication elements.

Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience. Rotorcraft Maintenance experience and H47 experience desired. Microsoft Office and Technical Publications authoring skills desired. S1000D experience desired. Fighter aircraft maintenance experience will be considered.
 
Job Number: TechDataDesFL
Job Location: Ft. Walton Beach, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Data Designer III / Technical Publications (Aircraft/Aerospace) - (OK)

Description:
Technical Data Designer III / Technical Publications (Aircraft/Aerospace) – We seek several Technical Data Designers / Technical Publications for positions within the Aircraft/Aerospace industry in Oklahoma City, OK.

These are long term, 12+ month contract opportunities.

Active Secret Clearance, NOT REQUIRED to start.

Develops all publication elements for Military Aircraft flight manuals, systems, and subsystems. Collects, researches and analyzes source data. Identifies source data inaccuracies and takes corrective action. Conducts peer reviews of completed publication elements. Participates in or conducts customer technical and program reviews.

Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

For immediate consideration, please forward your resume as a Word Document to:

Janice Plattner
ARM/Account Recruiting Manager
American CyberSystems (formerly “Comforce”)
Janice.plattner@acsicorp.com
 
Job Number: TechPubOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer 4

Description:
Thermodynamics Engineer 4

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 Year W2 Contract
Shift: 9/80, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Job Description
Performs thermal analysis at both the detailed component level and at the systems level. Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.
Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermal analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8924
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer IV

Description:
• Perform thermal analysis for recurring mission to support GSL P&TA group.

Job Description
Performs thermal analysis at both the detailed component level and at the systems level. Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering

10 years demonstrated ability to perform system-level thermal analyses.

Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.

Ability to build analysis models and tools based on program needs.

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.

Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.

Demonstrated proficiency applying analysis results to hardware solutions is desirable

Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.

Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Location: Denver, CO
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Position Summary: This position will work with the Engineering and Manufacturing teams and will ensure the successful integration of each design element with production. This individual will work both independently as well as part of a team to complete projects related to the production of aircraft components, assemblies and installations involving metallic and composite assemblies. The individual will lead and coordinate projects to eliminate defects and reduce costs. The individual should be proficient in systems routing, finishes, human factors, structural assembly, and manufacturing processes. The individual will work on continuous improvement and corrective action while coordinating and with Engineering, Quality, M&P, Tool Services, Production, MTE, and Production Control. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

Demonstrate advanced knowledge of standard concepts, practices, and procedures within aerospace.
Communicate with suppliers, translate technical information and ensure compliance to standards and requirements.
Tackle complex multi-faceted problems with competing requirements under significant schedule constraints.
Identify critical issues, perform risk assessments and communicate impact to stakeholders.
Directs work of others and acts as a lead.
Supporting manufacturing with technical issues, e.g. design, documentation, specifications etc.
Tooling implementation.
Continuous improvement, cost out initiatives, process flow improvements
Transfer of product between facilities to maximize efficiencies.
Key interface between supporting departments and manufacturing e.g. Quality, Engineering.
Engage in the completion of safety risk assessment, ergonomics, to maintain a safe working environment.
Perform other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or the equivalent in training, education and experience.
Requires proficiency using CATIA V5.
Highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office or production facility and communicate with other employees and management. Work will be performed in an office and production facility environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

Back to Advanced Job Search