Job Search Results

795 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/11/23 Thursday 03:57PM Pacific Time by ContractJobHunter. )

Listings 1 - 795

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2102 - INDUSTRIAL/MANUFACTURING ENGINEER

Description:
Conduct analysis capacity and give recommendations.

Participate in the strategic plan of the company 0-10 years.

Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times.

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (work centers, crew type, shift,).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize work center considering human and material flow.

Manage production changes (sequence).

Identify and participate in Improvement projects.

College degree in Industrial Engineering.

Have a minimum of 5 years%u2019 experience in aerospace or manufacturing industry.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a team worker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Must have minimum 5 years' experience as an Industrial Technologist or Engineer balancing production lines.

French - English working knowledge an asset.
 
Job Number: 2102
Job Location: Montreal, Canada
Rate: 52.40 US
Per Diem: Paid – 3 Mths Only - @ $225 per. wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Active Secret clearance needed-Test Engineer(NI Windows CVI and Labview) in Orlando, FL #1306AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Test Engineer Level 3
Job Number: 158498
Location: Orlando, FL
Compensation: DOE
Assignment Length: 12 month contract
Security Clearance (level): Secret
(Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes)
2nd shift

Description:
Designs, develops, and implements testing methods and equipment. Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices. Provides test area with parameters for sample testing and specifies tests to be performed. Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements. Responsible for test integration in the test area. Contributes to the completion of specific programs and projects. Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical issues associated with specific projects. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives..

Skill/Experience/Education
Mandatory:

**Must have experience in NI Windows CVI and LabView.**

Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or 3 years of professional experience with a related Master’s degree. Considered career, or journey, level.


Desired:
The desired candidate will be familiar with the recurring test engineering support of multiple mixed signal, electro-mechanical and electro-optical test stations as well have solid technical leadership skills.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) 1 2 3 4 5 Years Mandatory (Yes/No)

Electrical Engineering
Knowledge of Electro-Mechanical and Electro Optical principles to be applied to Test Station Solutions 0-3 Years Yes

Leadership Lead a small team in technical solutions and brief management 0-3 Years No

Testing Knows and has worked in the Test Engineering discipline No No
 
Job Number: #1306AS
Job Location: Orlando, Fl
Rate: 56.00/HR W2
Duration: 12 months
Start Date: ASAP
Input Date: 02/22/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Aeronautical Engineer - Level 3

Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Must have a current ACTIVE secret clearance**

Job Description
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.
- The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
•Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
•The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
•You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five (5) years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position

Desired:
- 5 years of flight test experience.
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 6961
Job Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/05/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / stress analysis with active secret KY

Description:
Job Title: Aeronautical Engineer Level 3
Job Number: 157760/0177
Location: Lexington, KY
Compensation: 38-65/hr
Assignment Length: 12 month contract
Active secret required



Description
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Responsibilities include: •Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn •The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations •You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:

•Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs •Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position
Desired:

•Experience with Microsoft Office Suite (Word, Excel, PowerPoint) •Demonstrated previous success working in a team based environment to meet objectives •Government report or thesis writing experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Flight Test Experience with flight testing. 0-3 Years No
 
Job Number: DW-0177
Job Location: Lexington, KY
Rate: 65/hr max
Duration: 12 month contract
Input Date: 02/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: AV/Sea
Job Location: Seattle, wa
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 06/27/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electrical Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

We are seeking a Sr Electrical Engineer to join our team in Seattle, WA. The qualified individual will have a broad Electrical Engineering background and possess leadership and technical experience in the aerospace industry, with an emphasis on safety. This candidate also must have experience providing clear direction, prioritizing tasks and communicating effectively with a diverse group of people.
Essential Functions:
• Coordinate system test and certification requirements.
• Comfortable working with ARINC 429 and ARINC 429 Data Analyzers
• Interpreting the raw ARINC 429 data
• Electrical Power System integration.
• Implementation on commercial aircraft with familiarity with MIL-STD-704
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
• Domestic and occasional international travel is required.
Desired Qualifications:
• 9+ years relevant work experience related to electrical systems integration and certification.
• Prefer experience with power generation, control, distribution and integration with the aircraft.
• Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
• Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Assurance Specialists - Ayer, MA

Description:
STS AeroStaff Services is currently hiring Aerospace Quality Assurance Specialists for open positions in Ayer, Massachusetts.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This position reports directly to the Quality Assurance Engineer/Manager. Primarily responsible, under minimum supervision, for inspection of incoming inspection, in-process inspection, and final inspection of materials and products in accordance with established company Quality Policies and Procedures, ISO requirements and customer specifications.

Job Duties:

• Must work independently or under minimal supervision in the performance of complex inspection tasks, extending to mechanical parts and assemblies, electro-mechanical assemblies and systems.
• Performs incoming inspection for all raw stock and procured components as well as manufactured parts applicable to all Product Lines.
• Monitors building of skids and boxes and inspects packing/packaging to drawings and specifications.
• Checks contents of final packaging against the parts list and bill of materials.
• Initiates status tags (Accept, Reject, Rework) and ECOs.
• Re-inspects reworked items and updates records accordingly.
• Maintains daily record of tests, surveillance and inspections.
• Submits reports to Quality Manager as required.
• Performs other duties as required or directed by Supervisory personnel.
• Creates reports for FAT, tool inspection, 1st articles, etc.

Qualifications:

• High School graduate and/or Technical degree.
• Programming ability for CMM’s, ASQ Certified Mechanical Inspector a plus.
• Minimum two years’ experience inspecting mechanical and electrical components to Military and Commercial Standards.
• Experienced in Incoming and In-Process inspection procedures, preferably in a shop fabrication environment using sampling plans per ANSI/ASQC Z1.4, where applicable.
• Ability to read and interpret complex drawings, military specifications and test procedures.
• Familiarity with geometric tolerancing/ANSI drawing symbols and tolerances, manufacturing methods and techniques, with a broad shop background in a recognized trade or craft (Aluminum/steel fabrication and Composite materials).
• Experienced in the use and application of Inspection tools and equipment, electronic test equipment, microscopes as well as computer skills in Microsoft Office programs to enter data and generate routine reports.
• Ability to lift 40 pounds.
• Willingness to work indoors and outside.
• Laser Tracker and/or Radar Tracker experience a plus.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37679
Job Location: Ayer, MA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/17/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Air Systems Engineer-Lead

Description:
Primary Responsibilities:
Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers.
Will be required to thoroughly check drawings for design intent and check Bill of Materials.
Must ensure drawings and deliverables meet the scope and client expectations.
Support procurement activities, including coordination with vendors and vendor drawings review.
Support contractor reviews, and installation planning activities.
Individual will travel globally for machine installation, check out and start up
Candidate will plan the work, and track and report work in progress.
Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate.
 
BS or MS in Mechanical or Chemical Engineering required.
10 to 12 years’ of related experience in the consumer products industry or any related industry is required. Experience with an engineering consulting firm is a plus.
Candidate should possess good experience on air systems, which include high vacuum systems, low vacuum systems, forced air systems, dust collection equipment like bag filters, RACF (reverse air flow cleaning filters), cartridge filters, trim collectors etc., vacuum material handling and vacuum conveying system concepts.
Knowledge of spark suppression and explosion suppression systems is preferred.
Experience on installation and duct traverse flow data collection would be added advantage.
Candidate must be able to calculate air balance, mass balance, line sizing, duct sizing, process vacuum requirements based on functions, and system pressure drop calculations.
Knowledge of international standards such as AMCA, ASHRAE , SMANCA ACGIL are required.
Should be able to select and size the fans, duct, and other air system elements like cyclones, filters etc.
Candidate must possess good communication skills and be able to successfully interact with clients on global projects.
Microsoft Office experience is required.
AutoCAD and SolidWorks experience is preferred.
Domestic and international travel will be required.
 
 
Job Number: 1610057845
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhdvAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler

Description:
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
  • Identifies units that fail tests or tolerance levels and repairs as necessary.

This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.



 
As our ideal candidate, you will meet the following requirements:
  • High school diploma or its equivalent.
  • ***candidates must have computer skills and be familiar of how to use a computer***
  • May require 1 year of experience
  • Experience working with microscope; working with microscopic components
  • Must be comfortable with microscope work
  • Soldering skills/experience required
  • Must be able to us tweezers, vacuum wands and torque drivers.
  • Must be able to follow direction, documentation and listening to instruction.
  • Understanding and awareness of chemicals in the work area
  • Must be comfortable working in a hood and a Clean Room gown all day

Special Considerations:

  • Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
  • Exposure to machinery, chemical, biological, and physical risks is minimal.

Work Schedule:
1st shift
Mon-Fri 6:30am - 3pm
2nd shift
3pm-11:30pm


 
 
Job Number: 1610061196
Job Location: Redmond, WA
Per Diem: No
Duration: 6 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G12TAAS&URLSource=cjhunter

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FypSAAS&URLSource=cjhunter

    Electronic Assemblers Needed in Redmond, WA

    Description:
    PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
     
    Some of your responsibilities as an Assembler will include:
    • Assemble fabricated parts at floor stations. 
    • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
    • Use hand tools and power tools to assemble units according to product specifications.
    • Identify units that fail tests or tolerance levels and repair as necessary.
    • Specific tools used will be tweezers, vacuum wands and torque drivers.


    These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

    All shifts are available.

      


     
    Requirements:
    • Experience working with microscope and microscopic components.
    • Soldering skills and experience.
    • Basic computer skills.
    • High school diploma or its equivalent.
    • US citizen or permanent resident.
    • English language comprehension and communication abilities.

     
    Job Number: 1510015749
    Job Location: Redmond, WA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Assembler Technician(Repair & Overhaul)

    Description:
    Job Description:

    • Performs precision assembly on complex production and repair actuators.
    • Adjusts or aligns through shimming and other means of mechanical adjustments specified by blueprint or other specification limits.
    • Utilizes a variety of mechanical measuring equipment such as: Dial Indicators, Calipers, and Micrometers to obtain proper assembly-build requirements.
    • Maintain dimensional accuracy on assemblies utilizing torque wrenches, fixtures, tooling, gauges, and other measuring devices.
    • Required to work from assembly instructions both written and oral.

    Education:
    High School Diploma or GED.
    Preferred to have trade certificate from Aerospace Trade School (CRIMSON IS A POPULAR ONE IN THE TORRANCE AREA THAT MANAGERS PREFER)
    **CRIMSON has changed its name to Spartan College of Aeronautics and Technology**
     
    Job Number: 51229
    Job Location: Torrance, CA
    Overtime: yes
    Duration: 7 months+
    Input Date: 02/06/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bala
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Assembler- MA

    Description:
    Chipton Ross is seeking an Assembler in Marion, MA

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Mandatory:
    Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

    Desired:
    Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
     
    Job Number: 160418
    Job Location: Marion, MA
    Rate: $15 to $17.00 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aviation Maintenance Program Specialists - Dallas, TX

    Description:
    STS AeroStaff Services is currently hiring Aviation Maintenance Program Specialists for open positions in Dallas, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    This resource will integrate all incoming and existing client Maintenance Program items into optimal MX intervals and check packages utilizing client and FAA requirements. They will be interacting with internal regulation teams, maintenance planners, production teams, and off site vendors (ATS, ATR). A&P mechanic experience is preferred.

    Job Duties:

    • Review Maintenance Program changes and related client documents and integrate with client's current MX intervals and check packaging.
    • Coordinate with Engineering and other departments to ensure Maintenance Program is 100% compliant.
    • Continuously analyze the Maintenance Program and eliminate unnecessary maintenance.
    • Coordinate with Planning Department to effectively optimize maintenance check packaging.
    • Coordinate with Reliability and Engineering to analyze A/C trends and identify gaps within the Maintenance Program.
    • Assist Fleet Leads on optimization initiatives within the Maintenance Program.
    • Execute directives set-forth by the Maintenance Programs Manager.
    • Act as an advocate for program management processes, and holds self and others accountable for adhering to processes.
    • Foster good working relationships and influence with peers in Engineering, Maintenance Projects, and any other operating departments.

    Qualifications:

    • Bachelor's degree preferred.
    • Technical College coursework, engineering or finance related degree would be an asset.
    • Minimum 5 years of maintenance experience, including two years in a Maintenance support related position.
    • Experience with Maintenance Programs a plus.
    • A&P license HIGHLY preferred.
    • Thoroughly knowledgeable of the client maintenance program, or have relevant knowledge of maintenance programs in general through experience at another airline.
    • A committed and passionate Leader of change.
    • Process-minded.
    • A strong analytical problem-solver, able to provide coaching for identifying practical approaches and real solutions to extremely complex problems.
    • A strong communicator.
    • Completely comfortable with computer applications such as Outlook, Microsoft Word, Excel, and PowerPoint.
    • Open to foster other new and existing automation needs.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37652
    Job Location: Dallas, TX
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aviation Maintenance Reliability Specialists - Dallas, TX

    Description:
    STS AeroStaff Services is currently hiring Aviation Maintenance Reliability Specialists for open positions in Dallas, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    This position will be dedicated to monitoring and measuring Mechanical Reliability of aircraft. Looking for opportunities to improve aircraft availability, improved dispatch reliability, and on time performance, etc. They will be responsible for taking raw data from Wizard, Trax and some Access. This analyst will be working within Tableau and creating dashboards from scratch. Altryx will be used to pull data from multiple sources and make it into a data file that is executable by Tableau. Candidates also must have intermediate proficiency in Excel – experience executing pivot tables, v-look up sand macros.

    Job Duties:

    • Perform data collection and validation on data elements required by the Reliability Program and Specialty Programs.
    • Monitor aircraft and fleet reliability data for trends that could affect operations, participating in event investigations as required.
    • Perform root cause analysis on data used to measure aircraft/fleet performance for safety, reliability and economic impact, and identify deficiencies in the Maintenance Program.
    • Work closely with the Fleet Reliability Group to help develop corrective action plans to address adverse trends, performing follow-up on effectiveness of those plans, and provide detailed briefings to Senior Leadership at the monthly Reliability Control Board Meeting.
    • Compile special ad hoc reports or studies where analysis of complicated or technical data is required; identify sources and extracts necessary information for reporting, developing customized computing solutions to aid in data access and presentation using a variety of software applications.
    • Work closely with peers, and internal and external Customers to support Reliability Program and provide Reliability data, statistics, and analysis for aircraft performance related requests at an exceptional level of customer service.
    • Develop customized computing solutions to aid in optimization prioritization and analysis using a variety of software applications such as Tableau, Altryx, Excel, and other software as necessary.

    Qualifications:

    • Hold a four year degree in an Aviation, Engineering, Mathematics, or Statistics related field; MBA preferred.
    • 6 years of professional experience in Maintenance Programs and Reliability engineering in Aviation/Engineering related field, or equivalent, required.
    • Previous experience with a client program for a 121 operator preferred.
    • Must have a high level of experience with computing systems and the ability to plan for future computing needs.
    • Experience creating meaningful visualizations to describe complex problems and solutions preferred.
    • Airframe & Powerplant license and/or pilot experience highly preferred.
    • Proficient in drawing conclusions from multiple data sources, translating those results into actionable objectives, and following through to execution and follow-up.
    • Must be able to analyze data and prepare visualizations and reports using business intelligence tools and use excellent verbal and written skills to present results.
    • Must be able to work under tight time constraints to accomplish assignments and projects with a positive attitude.
    • Manages and coordinates multi-departmental presentations to affected work groups and Senior Leadership.
    • Must have a high proficiency with Microsoft Suite with the ability to become proficient with other computer programs, including Business Intelligence tools.
    • Comfortable delivering formal communication, both written and verbal, to various levels of the organization including Customers, Subject Matter Experts, and Leaders.
    • Able to visualize, articulate, and condense complex initiatives, problems, concepts, etc., into concise, easily understood updates and/or presentations.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37651
    Job Location: Dallas, TX
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    A Leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer, Avionics for a 12+ month contract role.

    •Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
    •Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
    •Experience is design of cables and harnesses for applications for Aerospace products.
    •Proficiency in use of Creo PDM/Link and Windchill.
    •Additional proficiency with GD&T and tolerance analysis.

    Skills:
    •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
    ◦Previous experience with MODELCHECK preferred

    •Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
    ◦Large Assembly Management, Simplified Representations, Combination States
    ◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
    ◦Mechanism Design
    ◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

    •Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
    ◦Harness flattening using Creo Harness-MFG extension

    •Working knowledge of Creo Schematics 2.0 desired including:
    ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
    ◦Diagram creation utilizing a Central Catalog


    Education:
    BSME with 10 years of experience or 15 + years of equivalent experience
     
    Job Number: 11629
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 1 Year+
    Start Date: February
    Input Date: 03/03/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CMM Technician

    Description:
    Responsibilities:

    • Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.
    • Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications / drawings.
    • Candidate will utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and CMM’s.
    • Approves or rejects items and documents inspection results as required. Communicates with internal customers as required to resolve inspection, engineering and manufacturing challenges.

    Basic Qualifications:

    • High School Diploma or GED.
    • Minimum 5 years of in-process and final inspection experience.
    • Must have PC-DMIS experience using direct CAD models.
    • Minimum 3 years recent CMM inspection.
    Preferred Skills and Experience:
    • ISO 9001 / AS9100 experience a plus.
    • Romer Arm experience is preferred but it is not required with sufficient PC-DMIS skills.
    • Understanding of process control experience is a plus.
    • AA Degree is preferred.
    • Must be open to working any of the following shifts:1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 1st Shift (B) – T, W, Th, F, Sa – 5:00a - 3:30pm; 1st Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am with overtime as necessary.

    Additional Requirements:
    • Requires the ability to read and interpret engineering drawings and specification using ASME Y14.5.
    • Experience with GD&T and skillful use of metrology tools and gages required.
    • Experience with Microsoft applications including Word and Excel.
    • Be able to lift a minimum of 25lbs on occasions.
    • Stand, walk, push, pulls, reach overhead, and bend to the floor.
    ITAR Requirements:
    To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
     
    Job Location: Hawthrone, CA
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    CNC Lathe Machinist

    Description:
    PDS TECH is looking for a CNC Lathe Machinist for our client in TOrrance, CA

    Must be able to set up and operate manual and CNC lathes. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interpret written work instructions. Prior experience using multi-axis CNC Lathes required ie.) Okumas

    Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machines at a time, depending on production needs. Employee must be comfortable multi-tasking in a fast paced environment.
     
    Candidate must possess 2 years of Lathe Machinist experience (NOT SIMPLY MACHINE OPERATION).
    Must be comfortable setting-up and troubleshooting mechanical issues with CNC Lathes.
    Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges.

    High School diploma or GED required. 
    Machining trade a plus.

     
    Job Number: 1610061638
    Job Location: Torrance, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G3kyAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Interiors Design Engineer

    Description:
    Unique Skills:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
     
    Job Number: 24-134
    Job Location: Savannah, GA
    Rate: $55-$63/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 02/07/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Safety Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

    Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

    � Flammability
    � Emergency lighting
    � Escape slides
    � Seats crash testing
    � Exit row indications and placards
    � Emergency exit doors

    Essential functions:
    � System requirements verification and validation.
    � Flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.

    Desired Qualifications:
    � Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
    � Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: CS/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Certification Expert - Fire Protection

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a Certification Expert for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    The Engineer will work and lead activities of Fire Protection System (FPS) Team reporting to the CM in this role.
    Within the airworthiness tasks, the demonstration of compliance process includes the Independent Checking of the Demonstration of Compliance of documents produced by the Design Organization, which need airworthiness release. The independent checking is performed by the Compliance Verification Engineer (CVE).
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053086
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiiAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Combustion Devices Designer

    Description:
    Leading Aerospace company, located in Canoga Park, CA, is seeking an Engineering Designer V - Combustion Devices, for a 6+ month contract role.

    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5). Windchill experience is strongly preferred **

    ** Candidates MUST have experience with high pressure valves and rocket propulsion **

    ** This is a Level 5 role so candidates MUST have Leadership skills **

    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:

    Candidates must have experience with Creo & GD&T.
    Windchill experience strongly preferred.
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:

    BS degree in Engineering or equivalent.
    MS degree is desired.
     
    Job Number: 11842
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Months+
    Start Date: March
    Input Date: 03/27/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: John Dillon
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Completions Mechanical Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: 6898
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical/Liaison Engineering Consultant

    Description:
    Completions Mechanical/Liaison Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
    -Experience in Aircraft Production cabin installation liaison duties
    -Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
     
    Job Number: 6899
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Calibration Technicians

    Description:
    JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

    Duties:
    Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
    The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
    Must be able to work at heights.
     
    Job Number: 353387
    Job Location: Stratford, Ct.
    Rate: open
    Per Diem: Yes-If qualified
    Overtime: Possible
    Duration: 12 month +
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Component Installation Designer

    Description:
    PDS is seeking a Component Installation Designer for an open position in Trumbull, CT

    The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
    Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
    The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
    include electrical power system components, instrument panel and crew station design, antennas,
    lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
     
    The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
     
     
    Job Number: 1710064090
    Job Location: Trumbull, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKnmAAG&URLSource=cjhunter

    Component Installation Designer

    Description:
    PDS is seeking a Component Installation Designer for an open position in Stratford, CT

    The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
    Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
    The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
    include electrical power system components, instrument panel and crew station design, antennas,
    lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
     
    The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
     
     
    Job Number: 1710064091
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKnrAAG&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Installation Designer

    Description:
    Component Installation Designer:
    The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will
    work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired. Assignments in the Component Installation Section require the knowledge of electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematic, manufacturing practices as well as the
    ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
    The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas,
    lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations. LCA experience preferred.
     
    Job Number: 6866
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: N/A
    Overtime: Possible
    Duration: 12-24 months
    Start Date: 2/20/2017
    Input Date: 02/20/2017
    Firm Name: UNIVERSAL STAFFING SERVICES
    Attention: Karen Lee
    Address: 628 HEBRON AVE
    City, State: GLASTONBURY, CT 06033
    Phone: 860/527-8135
    Website: www.ussjobs.com

    Component Installation Designer

    Description:
    PDS is seeking a Component Installation Designer for an open position in Trumbull, CT

    The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
    Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
    The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
    include electrical power system components, instrument panel and crew station design, antennas,
    lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
     
    The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
     
     
    Job Number: 1710063951
    Job Location: Trumbull, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKS8AAO&URLSource=cjhunter

    Component Installation Designer

    Description:
    PDS is seeking a Component Installation Designer for an open position in Stratford, CT

    The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format.
    Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
    The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility
    include electrical power system components, instrument panel and crew station design, antennas,
    lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
     
    The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as  well as 3 to 4 years’ experience in a design/manufacturing environment.
     
     
    Job Number: 1710063953
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKSIAA4&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III

    Description:
    Component Product Engineer II/III

    Location: Canoga Park, CA
    Pay Rate: DOE ($42/hr - $48/hr)
    Duration: 6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
    ** This is not a designer role **

    Duties:
    -Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
    -Candidates should have at least 3 years of related work experience.

    Skills:
    • 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
    • 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
    • 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    • 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
    • 10%: Supplier integration with external vendors
    • 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

    Education:
    • A Bachelor's degree in Mechanical or Aerospace Engineering.
     
    Job Number: 7164
    Job Location: Canoga Park, CA
    Rate: DOE
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 04/19/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III

    Description:
    Component Product Engineer II/III
    Jupiter, FL
    6 Month Contract
    Pay Rate DOE


    • Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
    • Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    • Assignments typically have specified objectives and require the investigation of a limited number of variables.
    • May make presentations to small audiences
    • Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    • Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.
    • May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    Skills:
    • Ideal candidates would have 2 to 5 years of applicable expereince.
    • General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
    • Ability to read and interpret blueprints, technical drawings and specifications;
    • Ability to communicate clearly and concisely in written and oral formats
    • May require the use of engineering test equipment, CAD, and/or various computer systems.
    • Ability to operate effectively in a team environment.

    Education:
    BS Degree in Mechanical Engineering, Aerospace Engineering is required. MSME/AE degree is highly desireable.
     
    Job Number: 6771
    Job Location: Jupiter, FL
    Rate: DOE
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 03/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III / MUST have strong MS Project experience and scheduling experience CA

    Description:
    Job Title: Component Product Engineer
    Job Number: 158436/6407842
    Location: Canoga Park, CA
    Compensation: 48/hr max
    Assignment length: 6 month contract
    Manager would like to see more candidates with strong MS Project and Scheduling experience.

    Description:

    ** Candidates MUST have strong MS Project experience and scheduling experience **'

    Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.


    Candidates should have at least 3 years of related work experience.

    Skills:
    25%: Development and fabrication support of rocket engine components using engineering and scientific principles.


    25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.


    20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


    10%: Develops trade studies, design concepts, systems integration and component-level test plans.


    10%: Supplier integration with external vendors


    10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

    Keywords:
    Education:
    A Bachelor's degree in Mechanical or Aerospace Engineering.
     
    Job Number: MB-6407842
    Job Location: Canoga Park, CA
    Rate: 48/hr max
    Duration: 6 month contract
    Input Date: 03/08/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Product Engineer II/III CA

    Description:
    Job Title: Component Product Engineer II/III
    Keywords:
    Number of Positions: 3

    Remaining Positions: 1

    Duties:
    Candidates with between 2 and 5 years of experience needed.

    ** Candidates must be U.S. Citizens **

    ** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **



    ** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise **



    ** Please include college Grade Point Averages on resumes **



    ** This is not a Designer role. It is more of a Project Engineer position **



    • Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.

    • Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.

    • Assignments typically have specified objectives and require the investigation of a limited number of variables.

    • May make presentations to small audiences

    • Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.

    • Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

    • May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    Skills:
    • Ideal candidates would have 2 to 5 years of applicable expereince.

    • General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.

    • Ability to read and interpret blueprints, technical drawings and specifications;

    • Ability to communicate clearly and concisely in written and oral formats

    • May require the use of engineering test equipment, CAD, and/or various computer systems.

    • Ability to operate effectively in a team environment.



    Education:
    BS Degree in Mechanical Engineering, Aerospace Engineering is required. MSME/AE degree is highly desireable.


    State/Province: Florida
    City/Town: Jupiter
    Address: 17900 Beeline Hwy

    Start Date: 11/28/2016 Hours Per Week: 40.00
    Est. End Date: 05/28/2017 Hours Per Day: 8.00
    Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
     
    Job Number: MB-5822218
    Job Location: Jupiter, FL
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 03/06/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Computing Security & Information Protection Specialist, Berkeley, MO 63134

    Description:
    PDS is seeking a Computing Security & Information Protection Specialist for an open position in Berkeley, MO 63134.  
    In your role you will:
    • Evaluates, communicates and mitigates computing and information security risks.
    • Ensures that appropriate processes are in place and followed so that systems are compliant with applicable requirements.
    • Participates in compliance audits and assessments. Analyzes security events and records to determine if security incidents have occurred.
    • Provides consultation on security issues.
    • Develops policies and provides oversight for protection of computing security systems. U
    • ses advanced investigative knowledge to assist in investigations. Participates in and/or leads incident response teams.
    • Participates in and/or leads the development of information security training materials and processes.
    • Provides compliance and audit support.
    • This job requires interfacing with the appropriate government customers, suppliers, and company personnel to implement protective mechanisms and to ensure understanding of and compliance with government and company computing security requirements.
    • The candidate will be responsible to ensure that customer needs are effectively promoted in policy and security standards.

    Education:
    Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
    Experience:
    • With minimum supervision, the candidate must be able to perform security analysis of operational environments, threats, vulnerabilities and internal interfaces to define and assess compliance to accepted industry and government standards.
    • Configure various operating systems such as Windows, Linux, and Solaris to meet Joint Special Access Program Implementation Guide (JSIG), Joint Air Force Army& Navy 6/3 (JAFAN 6/3), ICD 503 and National Industrial Security Program Operating Manual (NISPOM) standards.
    • Develop certification and accreditation (C&A) documentation for new and existing systems; perform risk managed file extractions in accordance with customer guidance.
    • Review weekly audit logs and investigate any anomalies for UNIX, Linux and Windows systems.
    • Analyze new technologies, both hardware and software, to determine security vulnerabilities and mitigations.
    • The candidate will also be required to train general and privileged users in computing security processes, policies and procedures.
    • This job will require documenting and presenting for approval Information System Security Plans, Concept of Operations (CONOPS,) and other written documentation as required by JSIG, JAFAN 6/3, NISPOM, ICD 503 and other customer direction.

     
     
     




     
     


     
     
    Job Number: 1610047223
    Job Location: Saint Louis, MO
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000026Cp8AAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Electrical Engineering Consultant- Custom Engineering

    Description:
    Avionics Electrical Engineering Consultant- Custom Engineering

    Location: Savannah, Ga
    Rate: $61.00 - $68.00/HR
    Long Term contract


    Unique Skills:
    - Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
    - Having GII and GIII and MidCabin experience is a bonus.
    - The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
    - Mainly AutoCad and of course experience using Microsoft Word/Excel.
    - Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
    - Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6991
    Job Location: Savannah, GA
    Rate: $61-$68
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 04/26/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Customer Service Technicians - Arlington, TX

    Description:
    STS AeroStaff Services is currently hiring Customer Service Technicians for open positions in Arlington, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    The Customer Support Service Technician installs PC's and related hardware, investigates hardware problems, and performs minor system hardware and communication connection repairs. Additionally, this position performs basic diagnostic testing, assists in problem solving and resolution of trouble reports repairs, and restores faulty equipment to proper levels of functionality. Other responsibilities include the preparation of reports and documentation as required to support company ISO quality standards, and regular maintenance to ensure equipment operates properly.

    Job Duties:

    • Provide Support in the Setup, Installation, and Configuration of Computers and other Hardware that is part of Customer Deliverables.
    • Diagnose and Resolve any Problems that might arise in these systems.
    • Perform Installation and Maintenance trips for all systems.
    • Assist in Customer Support and Training for installed systems.
    • Assist with the Packing and Shipping of contract material.
    • Assist with the daily in house shipping requirements for in support of customer service and installation.
    • Write Technical Reports and Read and Follow Test Plans and Procedures.
    • Follows Blueprints, Guidelines and/or Diagrams to ensure Product Specifications and Tolerance Levels are met.
    • Test and Integrate Components per customer orders.
    • Operate production equipment.
    • Troubleshoot and Repair returned equipment.
    • Configure and Load Computers per customer request
    • Additional requirements as directed by the Customer Service Manager.

    Qualifications:

    • High School Diploma or GED is required.
    • Minimum 3 years technical experience required in troubleshooting, testing and maintenance of commercial and computer equipment.
    • Ability to read schematics, wiring diagrams, and assembly type drawings required.
    • Must be able to use a wide variety of hand tools.
    • Must be computer literate with knowledge of MS Office, computer assembly, configuration and support.
    • Mechanical, electrical and electronic assembly experience desired.
    • 50% travel to customer sites is required.
    • Spanish language is a plus but not required.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37557
    Job Location: Arlington, TX
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/03/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Customer Service Technicians - Atlanta, GA

    Description:
    STS AeroStaff Services is currently hiring Customer Service Technicians for open positions in Atlanta, Georgia.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    The Customer Support Service Technician installs PC's and related hardware, investigates hardware problems, and performs minor system hardware and communication connection repairs. Additionally, this position performs basic diagnostic testing, assists in problem solving and resolution of trouble reports repairs, and restores faulty equipment to proper levels of functionality. Other responsibilities include the preparation of reports and documentation as required to support company ISO quality standards, and regular maintenance to ensure equipment operates properly.

    Job Duties:

    • Provide Support in the Setup, Installation, and Configuration of Computers and other Hardware that is part of Customer Deliverables.
    • Diagnose and Resolve any Problems that might arise in these systems.
    • Perform Installation and Maintenance trips for all systems.
    • Assist in Customer Support and Training for installed systems.
    • Assist with the Packing and Shipping of contract material.
    • Assist with the daily in house shipping requirements for in support of customer service and installation.
    • Write Technical Reports and Read and Follow Test Plans and Procedures.
    • Follows Blueprints, Guidelines and/or Diagrams to ensure Product Specifications and Tolerance Levels are met.
    • Test and Integrate Components per customer orders.
    • Operate production equipment.
    • Troubleshoot and Repair returned equipment.
    • Configure and Load Computers per customer request
    • Additional requirements as directed by the Customer Service Manager.

    Qualifications:

    • High School Diploma or GED is required.
    • Minimum 3 years technical experience required in troubleshooting, testing and maintenance of commercial and computer equipment.
    • Ability to read schematics, wiring diagrams, and assembly type drawings required.
    • Must be able to use a wide variety of hand tools.
    • Must be computer literate with knowledge of MS Office, computer assembly, configuration and support.
    • Mechanical, electrical and electronic assembly experience desired.
    • 50% travel to customer sites is required.
    • Spanish language is a plus but not required.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37558
    Job Location: Atlanta, GA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/03/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    DFC Structures Flight Test Engineer

    Description:
    PDS is seeking a EFCS  Engineer for an open position in West Palm Beach, FL


     


    In your role, you will:


    • Test planning function, conduct and report helicopter flight tests in structures and dynamics
      1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
      2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
      3. Large volumes of gathered flight data are processed and analyzed.
      4. Certification and/or qualification tests are summarized in reports.
       

    Education and Experience:
    - Bachelor's in Aerospace or Mechanical Engineering as a minimum
    - Candidate must have flight test or aerospace design experience
    - Rotary wing experience preferred.
     

     
    Job Number: 1610052203
    Job Location: West Palm Beach, FL
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001sjdzAAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity Engineer (TSI)

    Description:
    Data Integrity Engineer (TSI)

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Check 3D engineering data for conformance to company requirements as directed.
    - Check parts for fit, form and function to the extent that information is available.
    - Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
    - Checkers are responsible for determining the acceptability of data in the following areas:
    • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    • Proper application and compliance with all Engineering and customer drawing requirements.
    • Use and understanding of GD & T a must.
    • Dimensioning and tolerancing including familiarity with ASME Y14.5.
    • Application of best drafting and design practices and procedures.
    • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    • Advise Design personnel regarding company drawing and design practices and procedures.
    • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
    • Knowledge of company parts list & PdocM, a plus.

    Essential Duties and Responsibilities
    • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
    • Ensures designs meet customer criteria, quality standards and FAA requirements.
    • Adheres to budget and project schedules.
    • Provides design guidance and feedback to other engineering personnel.
    • Other duties as assigned.
    • Knowledge of industry design and documentation standards.
    • Experience with mechanical assemblies and manufacturing technique design.
    • Ability to work independently and cross-functionally.
    • Experience in communicating with employees/teams in productive and efficient manner.
    • Strong communication and problem-solving skills.


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6945
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer

    Description:
    Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.
    • Technical responsibility for all design related tasks of the project while working with the following:
    o Project Head to ensure that design tasks are properly managed to achieve end item deliverables in accordance with project plans
    o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements
    o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust product is developed
    • Executes design activities including:
    o Customer / Suppliers:
     Liaise with customer/Suppliers for all design related issues
     Foster strong customer relationships through accountability, transparency and credibility
     Assist with development and maturation of system procurement specification and statement of work
    o Integration / Planning:
     Responsible and accountable for all design tasks and its completion dates
     Sets design priorities and objectives with a strong drive to meet expectations
     Communicates progress and roadblocks with the Integrated Product Team (IPT) and the Project Head
    o Design Tasks
     Develops, reviews, recommends, coordinates design, design change activity with customer, other Company disciplines including production and manufacturing engineering
     Generates design documentation such as trade studies, tolerance stack-ups, interface agreements, installation and proximity sensing analysis
     Investigates design related issues and develops effective solutions
     Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS-LS Engineering methodologies.
     Generate design layouts, developmental and kinematic assemblies within Catia V5
     Utilize New Product Introduction tools to facilitate execution for design related tasks as required
     Present designs at internal and external design reviews to ensure the design meets requirements and expectations
     Develop and achieve agreement on Landing Gear interfaces with customers and suppliers.
    o Problem Resolution
     Performs Engineering investigations into failures and participates in Root Cause and Corrective Action
     Ensure timely and satisfactory resolution of problems
    o Compliance
     Ensures compliance to engineering methodologies by providing direction/guidance to the design team.
     Maintains compliance to ITAR and regulatory requirements
    • Occasional travel between customer/suppliers locations.
    • Maybe asked to complete other tasks based on skills and qualifications





    Basic Qualifications
    • Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development
    • Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies
    • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
    • Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics
    • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
    • Demonstrated ability to work directly with customers and suppliers
    • Understanding of performance based specification requirements, requirements management and verification.
    • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
    • Successful candidates must meet all requirements under ITAR & CCGP
    • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
    • US citizen, permanent resident alien or able to review all export-controlled technical information.
     
    Job Number: 83719
    Job Location: Independence, OH
    Rate: 45 Per Hour
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/17/2017
    Firm Name: YOH SERVICES
    Attention: Jess McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/275-1218
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer

    Description:
    SUMMARY
    Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.

    ESSENTIAL DUTIES AND RESPONSIBILITIES
    • Designs and checks mechanical aircraft interior furnishing, structures and/or systems.
    • Ensures designs meet customer criteria, quality standards and FAA requirements.
    • Adheres to budget and project schedules.
    • Provides design guidance and feedback to other engineering personnel.
    • Provides liaison engineering support.
    • Maintains regular attendance including being at work, being on time to work and working full shifts.
    • Other duties as assigned.

    COMPETENCIES
    To perform the job successfully, an individual should demonstrate the following competencies:

    CORE COMPETENCIES
    • Adaptability – Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
    • Communications – Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
    • Dependability – Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
    • Initiative – Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
    • Teamwork – Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
    • Work Quality – Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.
    • Judgment – You display a willingness to make decisions, you exhibit sound and accurate judgment, you support and explain reasoning for decisions, you include appropriate people in decision-making process, and you make timely decisions.
    • Job Knowledge – Competent in required job skills and knowledge, exhibits ability to learn and apply new skills, keeps abreast of current developments, requires minimal supervision, displays understanding of how job relates to others, and uses resources effectively.

    SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
    Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.

    Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

    REQUIRED KNOWLEDGE, SKILLS & ABILITIES
    • Ability to check engineering drawings for Fit, Form and Function.
    • Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
    • Three dimensional (3D) design/drafting skills are preferred.
    • Knowledge of industry design and documentation standards.
    • Experience with mechanical assemblies and manufacturing technique design.
    • Ability to work independently and cross-functionally as part of an established and growing team.
    • Strong communication and problem-solving skills.
    • Strong time-management and organizational skills.
    • Experience adhering to budget and project schedules.
    • Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus.
    • Ability to travel as required.
    • Ability to work outside of core business hours as required.
     
    Job Number: 17-662
    Job Location: DFW, TX
    Rate: $50.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / NX 10 CA

    Description:
    Job Title: Design Engineer
    Job Number: 157682/4391
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team
    Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
     
    Job Number: MB-4391
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 03/10/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer 3

    Description:
    This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

    Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


    SKILLS / REQUIREMENTS
    Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

    Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

    Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

    Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

    Must be able to perform basic measurements and simple inspection processes

    Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

    CAD experience in CATIA or Pro-E a plus

    Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

    Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

    Must be able to write engineering reports that include analysis and results

    Must have excellent verbal and written communication skills

    Must be fluent in written and spoken English

    Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

    Knowledge of Microsoft Office products is essential

    Proof of Education is required
    US Citizenship Required
     
    Job Location: Inglewood, CA
    Rate: Open
    Per Diem: No
    Overtime: No
    Duration: Permanent
    Start Date: Now
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer Checker

    Description:
    Job Summary:
    Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.

    Basic Qualifications BS in Mechanical or Aerospace Engineering

    • Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
    • Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
    • Must be fluent with detailed part and assembly definition (FTA) using Catia V5
    • Working knowledge of materials and surface treatments.
    • Strong communication skills
    • Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
    • Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
    • Landing gear and/or hydraulic actuator design experience.
    • Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
    • Successful candidates must meet all requirements under ITAR & CCGP
    • Demonstrated values in alignment with Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
    • US citizen, permanent resident alien or able to review all export-controlled technical information.

    Preferred Qualifications:

    • Demonstrated knowledge of ASME Y14.100 and Y14.41.
    • Landing gear experience.
    • Knowledge of Root Cause Corrective Action.
    • Open minded, pro-active, independent, quick learner with a strong desire to learn.
    • Experience using SMARTeam – PDM
    • Experience using MATRIX ONE – PLM
     
    Job Number: 83724
    Job Location: Independence, OH
    Rate: 55 Per Hour
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/17/2017
    Firm Name: YOH SERVICES
    Attention: Jess McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/275-1218
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer Job Opportunity in Torrance, CA #4391AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: Design Engineer
    Job Number: 157682
    Location: Torrance, CA
    Compensation: 50.00/hr W2 Ceiling rate
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports

    Required skills:

    • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team

    Scope:
    Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.

    Education:

    • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.

    Other Requirements
    Experience with Unigraphics NX is a plus, but not a hard requirement.

    Moog specifically uses NX10.

    Anyone who is comfortable using 3D CAD software can pick it up fairly easily, just requires additional training.
     
    Job Number: #4391AS
    Job Location: Torrance, CA
    Rate: 50.00/hr W2
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 02/22/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Design Engineers

    Description:
    CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

    -Holiday Pay
    -Medical
    -Dental
    -Vision
    -Short-Term Disability
    -Direct Deposit
    -401(k) Immediate Enrollment
    -Annual Bonus
    -Referrals
    -Personal Communications
     
    Input Date: 01/23/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545, 817/354-5555
    800 Phone: 866/758-2494
    Email: resumes@agentetech.com
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Systems Integration Zone

    Description:
    Airframe Systems Integration Zone

    Location: Savannah, GA
    Duration: Long Term Contract
    Pay Rate: $60/hr - $65/hr
    Shift: First

    Position Purpose:
    The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

    Essential Functions:
    1. Manages Installation Design of primary aircraft barrel assemblies.
    2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
    3. Manages the coordination and development of parts, planning, tooling & purchase orders.
    4. Has oversight over the release of engineering documentation.
    5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
    6. Reviews engineering and manufacturing release criteria.
    7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Experience in communicating with employees/teams in productive and efficient manner.
    3. Ability to work independently and cross-functionally.
    4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    5. Ensures designs meet customer criteria, quality standards and FAA requirements
    6. Knowledge of industry design and documentation standards.
    7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
    8. Experience with mechanical assemblies and manufacturing technique design.
    9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    10. Performs other duties as assigned
    11. CATIA Knowledgeware and SmarTeam experience desirable.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6814
    Job Location: Savannah, GA
    Rate: 60-65
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Designer 4 - MS

    Description:
    Chipton-Ross is seeking a Designer 4 for an opening in Pascagoula, MS

    RESPONSIBILITIES:
    Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or AutoCAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.

    Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.

    Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker.

    Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication.

    Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.

    REQUIRED EXPERIENCE:
    High School diploma or equivalent and six (6) years of related design experience or associates degree and three (3) years of related design experience.

    EDUCATION:
    HS/ GED


     
    Job Number: 155940
    Job Location: Pascagoula, MS
    Rate: $40 to $46.00 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    Designer/Drafter 3

    Description:
    PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
    In your role you will:

    • Completes complex drawings to suit engineering changes and initiates engineering changes.
    • Completes the creation of complex design layout and detail drawings of complex products.
    • Performs compilation of materials and specification sheets.
    • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
    • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
    • Completes complex investigations related to product design and maintenance.
    • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
    • Completes planning test programs.
    • Selects material based on application; may coordinate procurement. 


     
    Skills and requirements: 
    • PTC CREO Elements/Pro 5.0 
    • Pro Sheetmetal, Piping, Cabling, Surfacing 
    • Autocad 2010 
    • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
    • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
    • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
    • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


    Education and Work Experience

    • Bachelor's degree in related field with 2 years experience 
    • Associate Degree in related field with 3 years experience 
    • High School Diploma with 5 years experience 


     
     
    Job Number: 1610055971
    Job Location: Sacramento, CA
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FXkOAAW&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Doors Design Engineer

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Drafters - Virginia Beach, VA

    Description:
    STS AeroStaff Services is currently hiring Drafters for open positions in Virginia Beach, Virginia.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Successful execution recruiting activities including, but not limited to sourcing, screening, qualifying, interviewing, comp analysis and formulating and extending offers.
    • Effectively evaluate employment factors such as job experience, education and training, skills, knowledge and abilities, physical and personal qualifications, and other data pertinent to classification, selection, and referral.
    • Partner with compensation to evaluate employment factors such as job experience, education and training, skills, knowledge and abilities other data pertinent to selection.
    • Prepare recommendations on starting salaries and extend job offers to most qualified candidates.
    • Provide applicants with critical information about the company to close applicants and provide candidates with onboarding expectations.
    • Ensure adherence to OFCCP process compliance.
    • Acts with a sense of urgency.

    Qualifications:

    • The individual must have a strong knowledge of AutoCAD Electrical, Autodesk Inventor and AutoCAD Mechanical.
    • The individual must be able to complete drawings that fall within the Assembly, fabrication, electrical and source control drawing formats.
    • The individual must be able to create all drawings in accordance with American Society of Mechanical Engineers (ASME) drafting practices.
    • Excellent sourcing and talent management experience.
    • Exceptional business process, analytical skills, and attention to detail.
    • Excellent written and verbal communication skills.
    • Strong interpersonal and relationship management skills.
    • Ability to adapt to changing business environment and requirements.
    • Demonstrated ability to command the attention and respect of leadership, ability to create and manage strategic alliances and drive the hiring process.
    • Unwavering ethics and values; trusted business partner.
    • Team player; focused on organizational and team success.
    • Never satisfied with status quo; always pushing for improvements and change.
    • Courageous; takes calculated risks.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37629
    Job Location: Virginia Beach, VA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/10/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Electric System Component Outfitting Interface Engineer

    Description:
    This position is located in Nagoya, Japan.

    Electric system component outfitting interface engineer
    • Mechanical/ structural interface engineering expertise
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044922
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Responsible for the design, modeling, development and testing of a system. Develops functional requirements. Understands and applies standard engineering principles. Creates simulations and prototypes to evaluate preliminary designs and test how a machine, structure or system operates. Designs and tests components, and integrates components to produce final product. Monitors quality of products and controls the efficiency of processes. Evaluates a design's overall effectiveness, cost, reliability, and safety. Investigates root causes of failures to maintain quality and recommend improvements.


    Supports the design, development, and integration of embedded electronic circuits into battery operated, low energy and light weight portable system.
    • Strong design background in analog circuits; op-amps, AtoD, DtoA, timers, constant current sources, motor controls, FETs in addition to digital design experience.
    • Work activities include designing, prototyping, and developing new technologies that seamlessly works together, while driving proof of concepts into production intent solutions.
    • Use of robust design tools like schematic capture, Layout concerns, PSPICE, OPEX, LEAN engineering, failure mode analysis, tolerance stack ups, risk management, and worst case analysis will be needed.
    • Experience should include standard electrical design tools and equipment including meters, scopes, data acquisition, thermal, conducted and radiated emission devices.
    • Works with cross functional teams including software, mechanical, suppliers, sourcing, manufacturing, test labs, approval labs, and other engineering functions to design, develop, and deliver solutions.
    • Project management including tracking personal electronic schedule, risk mitigation of designs, coordination with suppliers and sourcing.
    • Hands on self-motivated individual that is accountable for creation, capture and reuse of knowledge with strong communication skills, providing timely deliveries of assigned tasks.
    • In addition to embedded real time solutions, experience developing physical interfaces for I2C, SPI, UART, CAN, RS485 and other similar peripherals is useful.
    • Hands on experience or key understanding of programming languages including C., C++, scripting, and APIs is a plus.
    • Experience working with FDA or other regulatory industries is beneficial.
    • Bachelors of Science with 5+ years of experience in developing embedded hardware circuits.
     
    Job Number: EE
    Job Location: Portage, MI
    Rate: $55-$60
    Per Diem: Yes
    Overtime: Possible
    Duration: 6-12 Months
    Start Date: ASAP
    Input Date: 02/17/2017
    Firm Name: AMERICAN CONTRACT GROUP
    Attention: Derek Doucette
    Address: 50 HIGH ST STE 46
    City, State: NORTH ANDOVER, MA 01845
    Phone: 978/984-5581
    800 Phone: 877/723-9087
    Fax Phone: 978/208-8246
    Website: www.americancontractgroup.com

    Electrical Engineer II

    Description:
    PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

    In your role, you will:


    The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
     
    Duties:
    • Provide electrical design and development support on a variety of simulator programs.
    • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
    • Support peer reviews for electrical designs.
    • Perform and document electrical load analysis.
    • Support development of Interface Control Documents (ICD)s.
    • Ability to work with a variety of I/O systems.
    • Knowledge of both analog and digital component design.
    • Support development of hardware subcontractor specifications.

     
    As our ideal candidate, you will meet the following requirements:

    Qualifications:
    • B/S in Electrical Engineering.
    • 4+ years of electrical engineering technical experience.
    • Experience with CAD software, preference to AutoCAD.
    • Systems integration experience.
    • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
    • Good computer skills including working knowledge of Microsoft Office.
    • Strong communication skills and good team work.
    Be able to obtain a DOD security clearance.

    Additional requirements: 
    Aerospace experience is required.
     
    At a minimum resumes should reflect experience with the following within the aerospace industry.
     
    •             Design and develop electrical systems on aircraft
    •             Produce wiring diagrams using computer aided design
    •             Experience with electrical load analysis

     
     
    Job Number: 1610060907
    Job Location: Arlington, TX
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

    Electrical Fabricator

    Description:
    PDS Tech, Inc.is seeking an ELEC. FLT CNTRL/SIM. LABS for an open position in Stratford, CT
    Responsibilities include:

    • Function: Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.
    • Job Duties:  Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    • Experience with electrical and electronic fabrication.
    • Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    • Experience with all the tooling and dies required to terminate mil-spec wires
    • Experience terminating EMI harness assemblies
    • Experience fabricating wire harnesses
    • Experience fabricating test sets
    • Experience using hand tools, mechanical and electrical
    • Experience with schematics and electrical diagrams
    • Evidence of Lockout Tag Out Authorized training

    Other Requirements:

    • Requires Safety shoes
    • Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

     
    Job Number: 1610054244
    Job Location: Stratford, CT
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CHEnAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Electrical Systems Engineer

    Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Long Term contract


    Unique Skills:
    1) AutoCad required Catia V5 preferred
    2) G650 and G500 electrical system design experience preferred.
    3) 14 CFR 25 Subpart H - EWIS experience preferred
    4) Part 25 Certification Experience for Cabin Interiors preferred
    5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6) Experience with power distribution, lighting, switching, sizing and routing.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.

    Job Description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7041
    Job Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 06/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Technician

    Description:
    One year in length
    Maximum Hourly pay rate $18.00
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     

     
    Job Number: 1710063131
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing engineer

    Description:
    Electrical/Mechanical 3D Wire Routing Engineer – Engineer Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -3D wire routing
    -EWIS
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System -Satellite communications
    -Water System
    -Waste System
    -Cabin interior monuments
    -Seats

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6884
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electro-Mechanical Assembler

    Description:
    PDS Tech is seeking Assemblers for open positions in Redmond, WA.
    • Assembles fabricated parts at floor stations.
    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
    • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
    • Identifies units that fail tests or tolerance levels and repairs as necessary.
    • Position may involve microscope work and require the use of a Clean Room gown and hood.


     
    • Must have computer skills and be familiar with how to use a computer
    • Requires a verifiable high school diploma or its equivalent.
    • Experience working with microscope; working with microscopic components
    • Soldering skills/experience required
    • Must be able to use tweezers, vacuum wands and torque drivers.
    • US citizenship is required.


    This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.

     
     
    Job Number: 1710064077
    Job Location: Redmond, WA
    Duration: 8 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 12720 GATEWAY DR S STE 102
    City, State: TUKWILA, WA 98168-3333
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKmFAAW&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Emergency Electric Power Generation Integration Engineer

    Description:
    This position is located in Nagoya, Japan.

    Emergency electric power generation integration engineer
    • RAT hardware interface with aircraft expertise
    • Mechanical/ structural interface engineering expertise
    • Hydraulic system knowledge
    • Capability to review stress analysis by supplier/ partner
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044923
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FoAAI&URLSource=cjhunter

    Engineer - Payloads

    Description:
    This position is located in Nagoya, Japan.  Interior engineer who can manage PRA related to interior such as fluid leakage. Will lead and provide technical quality review of the development and documentation of mechanical and fluid systems and the thermal environment to establish system design.  Lead activities to validate and verify mechanical and fluid system requirements.  Leads the development, maintenance or modification of system components designs/proposal to provide installation and detail documentation.  Must be familiar with waste water management and fluid leakage.  Manages supplier development, test and production activities and directs supplier to optimize integration and achieve program goals.  Prioritizes, tracks performance and documentation of analysis of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate and assess the design.  Familiar with current FAA regulations regarding all interior components.
    • 15-20 years experience 
    • Bachelors Degree in Engineering
    • International experience desirable
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification

     
    Job Number: 1610044711
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000036dHAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III

    Description:
    JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

    Job Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

    Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

    Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

    5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

    Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

    Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

    Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

    Education:
    Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

    Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

    Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

    Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
     
    Job Location: Irvine, CA
    Rate: Open
    Per Diem: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Consultant- Custom Engineering

    Description:
    UNIQUE SKILLS
    Provide certification support, mechanical design engineering, or electrical design engineering, with extensive Gulfstream experience.

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 17-659-89601
    Job Location: Southeast
    Rate: $61.00 to $68.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 02/09/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Contractor Completions - Designer/Mechanical Engineering

    Description:
    Engineering Contractor Completions - Designer/Mechanical Engineering

    Location: Savannah, GA
    Pay Rate: $55/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -As a Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions on the G500:
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    -Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Function as a liaison with the shop on engineering issues.
    -What you'll bring to the team:
    • Create design and models using either CATIA V5, or AutoCAD and SmarTeam.
    • Employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Group Head &/or Team Lead(s).
    • End Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.

    Preferred skills:
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Microsoft Project, Word, Excel and Power Point.
     
    Job Number: 7052
    Job Location: Savannah, GA
    Rate: 55.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer

    Description:
    A Leading Aerospace company, located in Canoga Park, CA, is seeking a Engineering Designer for a 6+ month contract role.

    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **

    **Windchill experience is strongly preferred **

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

    8 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems

    Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware preferred.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


    Skills:

    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:

    BS degree in an Engineering field or equivalent.
    MS degree is desired.
     
    Job Number: 11852
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Months+
    Start Date: February
    Input Date: 03/03/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II (Valves)

    Description:
    Engineering Designer II (Valves)

    Location: Canoga Park, CA
    Rate: $35.00 - $38.00/HR
    3+ month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **
    ** Windchill experience is strongly preferred **
    ** Candidates must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - 5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems
    - Knowledge in the design of high pressure cryogenic, ambient and high temperature Valves preferred.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in an Engineering field or equivalent.
    - MS degree is desired.
     
    Job Number: 7013
    Job Location: Canoga Park, CA
    Rate: $35.00 - $38.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II / Valves CA

    Description:
    Job Title: Engineering Designer
    Job Number: 158435/6018120
    Location: Canoga Park, CA
    Compensation: 38/hr max
    Assignment length: 5 month contract


    Description:

    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **

    ** Windchill experience is strongly preferred **

    ** Candidates must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems **

    ** Candidates must be U.S. Citizens ** ** Permanent residents are NOT eligible for this role ** ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.


    5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems


    Knowledge in the design of high pressure cryogenic, ambient and high temperature Valves preferred.



    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.


    Education:
    BS degree in an Engineering field or equivalent.
    MS degree is desired.
     
    Job Number: MB-6018120
    Job Location: Canoga Park, CA
    Rate: 38/hr max
    Duration: 6 month contract
    Input Date: 03/01/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $55.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **
    **Windchill experience is strongly preferred **

    - Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
    - 8 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems
    - Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware preferred.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


    Skills:
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in an Engineering field or equivalent.
    - MS degree is desired.
     
    Job Number: 7012
    Job Location: Canoga Park, CA
    Rate: $55.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates should have experience specifically with flight electronics packaging for space applications **
    ** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
    ** Candidates should be able to design from concept to a drawing released in Creo **

    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
    - Position will support various different Electric Propulsion programs

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: 6990
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 04/25/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / CREO GD&T Windchill CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158376/6018126
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:

    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **



    **Windchill experience is strongly preferred **



    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



    8 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems

    Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware preferred.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



    Skills:

    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

    Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

    Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

    Must be able to prepare and make presentations at both internal and customer design reviews.
    Education:
    BS degree in an Engineering field or equivalent.
    MS degree is desired.
     
    Job Number: MB-6018126
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 04/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158326/6312362
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:


    Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

    ** Candidates should be able to design from concept to a drawing released in Creo **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Perform engineering design tasks related to space electronics based products.
    Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

    Skills:
    Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    Familiarity with aerospace/defense engineering design and production processes and disciplines.
    Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Keywords:
    Education:
    Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: MB-6312362
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 04/24/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer V

    Description:
    Engineering Designer V

    Location: Canoga Park, CA
    Rate: $65.00 - $67.00/HR
    6 month contract


    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5). Windchill experience is strongly preferred **

    ** Candidates MUST have experience with high pressure valves and rocket propulsion **

    ** This is a Level 5 role so candidates MUST have Leadership skills **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Candidates must have experience with Creo & GD&T.
    - Windchill experience strongly preferred.
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team. management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - 10+ years of direct experience required.
    - BS degree in Engineering or equivalent.
    - MS degree is desired.
     
    Job Number: 7003
    Job Location: Canoga Park, CA
    Rate: $65.00 - $67.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer V / lead design and development engineer / CREO GD&T high pressure valves and rocket propulsion CA

    Description:
    Job Title: Engineering Designer V
    Job Number: 158334/6016201
    Location: Canoga Park, CA
    Compensation: 67/hr max
    Assignment Length: 5 month contract

    Description:


    Duties: ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5). Windchill experience is strongly preferred **

    ** Candidates MUST have experience with high pressure valves and rocket propulsion **

    ** This is a Level 5 role so candidates MUST have Leadership skills **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:
    Candidates must have experience with Creo & GD&T.
    Windchill experience strongly preferred.
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.

    Keywords:
    Education:
    BS degree in Engineering or equivalent.
    MS degree is desired.
     
    Job Number: MB-6016201
    Job Location: Canoga Park, CA
    Rate: 67/hr max
    Duration: 6 month contract
    Input Date: 03/29/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Entry Level Development Engineer- US Citizen Only

    Description:
    A Development Engineer job in Warsaw, IN is available courtesy of Adecco Engineering and Technology. You will be supporting management in order to meet performance and quality requirements. You will need a strong design background. You will need to have five years of experience within the medical device industry.

    Development Engineer job responsibilities include:
    * New Product Development and Development
    * Experience in establishing process methods to meet performance and quality requirements
    * Familiarity with control procedures such as the Engineering Change Notification and Deviation Process
    * Knowledge of blueprint reading and geometric dimensioning
    * Must have developed process expertise in two of the following areas: machining, casting, finishing, packaging, tool design, programming, thermal processing/vacuum furnaces, or spray technologies.

    Qualifications:
    * Minimum education requirement is a bachelor’s degree in biomedical or mechanical engineering, other engineering science, or combination of education and experience (additional business degree is a plus).
    * Candidates must have excellent oral and written communication skills.
    * Ability to balance marketing, manufacturing, and design requirements to meet customer requirements
    * CNC programming, Computer Aided Design Systems, and Unigraphics 3-D modeling software are not required, but preferred.

    If you are interested in this Development Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please Collin Ponzo at (904) 748.6053 or collin.ponzo@modis.com

    Equal Opportunity Employer Minorities/Women/Veterans/Disabled
     
    Job Number: 6899
    Job Location: IN
    Rate: 27.00
    Per Diem: No
    Overtime: Yes
    Duration: 24+ Months
    Start Date: ASAP
    Input Date: 02/07/2017
    Firm Name: ADECCO ENGINEERING & TECHNICAL
    Attention: Collin Ponzo
    Address: 1000 2ND AVE STE 1560
    City, State: SEATTLE, WA 98104
    Phone: 904/748-6053
    Website: www.modis.com

    FAA Machinist

    Description:
    PDS Tech is seeking an FAA Machinist for an open position in Tulsa OK.
    • Assembles, repairs, and fabricates metal parts by operating mechanical equipment. Assembles parts into sub-units or complete units. Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product.

    As our ideal candidate, you will meet the following requirements:
    • Uses blue prints and design sketches to ensure the proper dimensions and tolerance levels of the finished product. Requires a high school diploma or its equivalent. May be required to meet certain certifications in field and to have at least 0-2 years of experience. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 

     
    Job Number: 1610054118
    Job Location: Tulsa, OK
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Shannon White
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGbSAAW&URLSource=cjhunter

    FSE PRA PA Lead - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a FSE PRA PA Lead for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    Able to manage of FSE PRA and CP G15 issues for pressurized area (PA)
    -Able to prepare of FSE PRA reports
    Complete FSE PRA verification activities 
    -Experience of zonal level analysis
    -Understanding of the regulatory requirements for fire safety in the pressurized area
    -Good communication with other ATA teams and suppliers
    -Experience of discussion with the authorities
    -Capability of documentation for T/C
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053085
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiJAAU&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

    Description:
    Job Title: Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
    Job Number: 158370/1286
    Location: Orlando, FL
    Compensation: 75/hr
    Assignment Length 12 month contract
    Secret Clearance

    Description:

    Mechanical Structures / Dynamics Engineer:

    Perform stress analysis for flight structures and ground test support equipment’s.

    Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.

    Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.

    Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.

    Requires good verbal and written communication skills, and ability to work in a team environment.

    Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

    Skill/Experience/Education
    Mandatory:

    Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

    Desired:

    Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills PRO E and/or CATIA skills
     
    Job Number: DW-1286
    Job Location: Orlando, FL
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 02/23/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Description:
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Location: Orlando, FL
    Duration: 1 year contract
    Pay Rate: $65/hr - $75/hr (DOE)
    Shift: 1st, 9/80
    **Must have an Active Secret Clearance**


    Job Description:
    -Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
    -Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
    -Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
    -Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
    -Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
    -Requires good verbal and written communication skills, and ability to work in a team environment.
    -Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
    -Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


    Mandatory Skills:
    -Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


    Desired Skills:
    -Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    -PRO E and/or CATIA skills
     
    Job Number: 7019
    Job Location: Orlando, FL
    Rate: 65.00-75.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    Flight Controls Engineer

    Description:
    PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

     
    •  
    • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
    • Applicable coursework or coop/intern experience to this position desired.
    • Working knowledge of generic CAD design tool processes is desired.
    • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
    • Experience with Kinematics in CATIA
    • Flight Controls Systems design experience a plus
    • Must have excellent verbal communication and presentation skills.
    • Proficient with Microsoft Office applications including Word and Excel.
    • Professional demeanor, troubleshooting and organizational skills are necessary.
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610045561
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

    Flight Readiness Technician-SECRET

    Description:
    PDS Tech is seeking a Flight Readiness Technician for an open position in Palmdale, CA.

    In your role, you will:

    • Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight.
    • Perform operational checkout of aircraft prior to and during preflight.
    • Inspect explosive and armament installations.
    • Maintain aircraft historical records.
    • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
    • Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems.
    • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
    • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting,adjustment and repair of any electrical or electronic system.
    • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
    • Perform operational checkout of hydraulic systems and mechanical systems.
    • Diagnose and correct hydraulic and mechanical malfunctions.
    • Operate engines during run-ups and troubleshoot when needed.
    • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines.
    • Install or replace reservoirs, etc. and repair leaks in same.
    • Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators.
    • Splice, route, clamp, solder, and string tie wires or wire bundles.
    • Repair, install and hook up bomb, missile and rocket racks and pylons.
    • Install and load ejection seats and guns.
    • Install adjust, repair and replace structural parts and assemblies.
    • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures.
    • Modify aircraft components or aircraft support equipment.
    • Perform composite repairs
    • Must have Secret Clearance with the ability to obtain a Top Secret.

    As our ideal candidate, you will meet the following requirements:
    • Specialized vocational training, or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience.
    • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
    • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
    • Knowledgeable and able to use computer systems for office and shop applications.
    • Knowledgeable about and able to work in FOD controlled environments.
    • Knowledgeable and able to apply shop math.
    • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    • Able to complete and maintain all required training and certifications needed to do your job efficiently.
    • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
    • Must have Secret Clearance with the ability to obtain a Top Secret.

     
    Job Number: 1610061554
    Job Location: Palmdale, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G32jAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 10/06/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education/Experience
    Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-156
    Job Location: Savannah, GA
    Rate: $56-$67/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
    -Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    -Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6952
    Job Location: Savannah, CA
    Rate: 56-67
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/03/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Flight Test Engineer - Test Pilot School Graduate - Contract-WIC03960-C

    Description:

    PDS is looking for an Flight Test Engineer - Test Pilot School Graduate:

    You have built on your strong academic results with a number of years of employment in a Flight Test Engineer role. You are now interested in expanding your horizons and continue your development as a Flight Test Engineer working in a Flight Test Center. You will have the opportunity to exercise the exceptional theoretical and practical knowledge gained through the conduct of a variety of flight test tasks. This knowledge will directly contribute to the safe and efficient conduct of flight test activities. These activities will support company development or certification testing for the wide range of company products. You will work side by side with Test Pilots to develop test plans and safety assessments and use your exceptional communication skills to liaise with other functional groups in the test center.

    Qualifications
    As our ideal candidate:     



    • You have 3-8 years of flight test experience
    • You have a degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering or graduated from a recognized Test Pilot School
    • You have demonstrated capacity and skills to prioritize and manage large amounts of information.
    • You have a strong understanding of common flight test procedures and requirements.
    • You have an appreciation for the existence of Transport Canada, FAA and EASA Certification processes and procedures (or equivalent military processes)
    • You have the interpersonal skills necessary to work effectively with a variety of individuals, departments and organizations.
    • You have well-developed written and verbal communication skills.
    • You will have an understanding that the flight test environment may require irregular work hours and does require travel.
    • You must be able to be obtain and maintain a FAA Class 3 Medical Certificate.
    • You have a significant number of airborne test conductor experience.


     







     






     
    Job Number: 1610061439
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G29GAAS&URLSource=cjhunter

    Flight Test Instrument Engineer

    Description:
    PDS Tech, Inc. is seeking a Flight Test Instrument Engineer for a position in Windsor Locks, CT
    • Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
    • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
    • This can involve testing, data analysis, and interface with all aspects of the engineering department.
    • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
    • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met
    • Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures,
    • Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. 

    • Experience with advanced instrumentation and data acquisition systems is required.
    • Knowledge of LabVIEW desired.
    • Experience should also include five years working on the testing of complex mechanical systems, including testing of components such as, heat exchangers, pumps, fans, & accumulators.
    • Must have the ability to work independently and be self-motivated.
    • Excellent communication skills, written and verbal are required.
    • Proficiency in Microsoft Office software products is required. 

     
    Job Number: 1610060263
    Job Location: Windsor Locks, CT
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fu6pAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 10/27/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Manufacturing Engineer II

    Description:
    Flight Test Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    Production planning and shop floor support.

    Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Education and Experience Requirements:
    Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.
     
    Job Number: 7080
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Lab - Mechanical Subsystems

    Description:
    Johnson Service Group has 2 openings for a Ground Test Lab for a 2-year contract for our client in Stratford, CT!!!

    Description:
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned).
    Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SMEs.
    Good ability to communicate work progress to the IPT CAM for Earned Value progress entry. The candidate must possess the ability and experience to provide technical oversight and review of supplier generated drawing package and 3D CATIAV5 (LCA) models.
    Ability to work in an IPT team environment (with system engineering, structural analysts, weight/balance engineer, materials, manufacturing, test, team members) with good communication skills is a must.
    Tracking status and monitoring progress of external design center drawing packages and similar tasking will be required.
    Education: Bachelor of Science Mechanical Engineering
     
    Job Number: 352682
    Job Location: Stratford, CT
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Ground Test Structural Lab Technician

    Description:
    PDS Tech,Inc. is seeking a Second Shift Ground Test Structural Lab Technician for an open position in Stratford, CT.
    • Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs. 
    • Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred. 
    • Must be able to read and interpret engineering mechanical drawings and fluid power schematics. 
    • Must be able to assist with the buildup and monitoring of engineering laboratory facilities. 
    • Must be able to assemble required fixtures and facility hardware. 
    • Must be able to work on elevated work platforms. 
    • This is a second shift position. 




     

     
    Job Number: 1710064078
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKmKAAW&URLSource=cjhunter

    Ground Test Structural Lab Technician

    Description:
    PDS Tech,Inc. is seeking a  Test Lab Technician for an open position in Stratford, CT.


    Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs.




     
    • Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred.
       
      Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
       
      Must be able to assist with the buildup and monitoring of engineering laboratory facilities.
       
      Must be able to assemble required fixtures and facility hardware.
       
      Must be able to work on elevated work platforms.
       

     
    Job Number: 1710063537
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBMaAAO&URLSource=cjhunter

    Ground Test Structural Lab Technician

    Description:
    PDS Tech,Inc. is seeking a  Test Lab Technician for an open position in Stratford, CT.
    First Shift Ground Test Structural Lab Technician 

    • Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs. 
    • Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred. 
    •  


     
    • Must be able to read and interpret engineering mechanical drawings and fluid power schematics. 
    • Must be able to assist with the buildup and monitoring of engineering laboratory facilities. 
    • Must be able to assemble required fixtures and facility hardware. 
    • Must be able to work on elevated work platforms. 

     
    Job Number: 1610060225
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FtvwAAC&URLSource=cjhunter

    HVAC/Mechanical Engineer

    Description:

    Primary Responsibilities:



    Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



    Must ensure deliverables meet the scope and client expectations 



    Support procurement activities, including coordination with vendors and vendor drawing reviews



    Support contractor reviews, and installation planning activities



    Individual will travel globally for machine installation, check out and start up



    Candidate will plan the work, and track and report work in progress



    Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


    Qualifications:



     



    BS or MS in Mechanical or Chemical Engineering required



    7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



    Candidate should possess good experience on HVAC systems, utilities and fire systems design



    Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



    Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



    Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



    Knowledge of boiler systems is preferred



    Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



    Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



    Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



    Candidate must possess good communication skills and be able to successfully interact with clients on global project



    Microsoft Office experience is required



    AutoCAD and SolidWorks experience is preferred



    Domestic and international travel will be required


     
    Job Number: 1610057836
    Job Location: Green Bay, WI
    Duration: 4 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sue Van Pay
    Address: 110 PACKERLAND DR STE A
    City, State: GREEN BAY, WI 54303
    Phone: 920/499-9943
    800 Phone: 800/333-1389
    Fax Phone: 920/499-9067
    Email: cecjgreenbay@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

    Handling Qualities & C ontrol Laws

    Description:
    PDS Tech is seeking a an Engineer for an open position in Stratford, CT

    your role, you will:- The job entails Control Law (CLAW) algorithm development, requirements documentation and flow down, test vector development and implementation, handling qualities evaluations of CLAWs, and evaluation of reversionary modes & failures.







    BS Aerospace, Electrical or Mechanical Engineering w/5+ years of experience in CLAW Design and Analysis








     
    Job Number: 1710062656
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G8SuAAK&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Hydromechanical -- Wing High Lift

    Description:
    Hydro-mechanical, Global 7000/8000

    Job location: Toronto, Ontario Canada

    Paid Travel
    Great Hourly Rates
    Direct Deposit
    Per Diem
    Tax Benefits
    Healthcare Options
     
    Job Location: Canada
    Input Date: 03/27/2017
    Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
    Attention: Erika
    Address: 150 RESEARCH BLVD
    City, State: ROCHESTER, NY 14623
    Phone: 585/441-9800 x106
    Email: erika.legrand@noramtecna.com
    Website: www.noramtec.com

    INSTRUMENTATION LABS

    Description:
    PDS Tech, Inc. is seeking a Instrumentation Lab Tech for an open position in Stratford, CT.
    Skills/Experience Required
    • Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
       

     
    Must be able to support Sensor calibrations
    Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.
    Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry , thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
     
     
    Job Number: 1710062950
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9KuAAK&URLSource=cjhunter

    Ignition Source Specialist - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking an Ignition Source Specialist for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    Basic work scope is to help the team to demonstrate compliance with all applicable requirements and to generate the related documents required in the Type Certification Application and Approval processes.
     The main duties and responsibilities will be related to Ignition Source Minimization of equipment for fire prevention. This will include interfacing with all other aircraft function and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Ignition Source Minimization and Certification.
    FAR25.869(a)(1), 25.863(a) and AC25.863 draft
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053063
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tR8nAAE&URLSource=cjhunter

    Integration Specialist Technician

    Description:
    PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
    In your role, you will:

    • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
    • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
    • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
    • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
    • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
    • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
    • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
    • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
    • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
    • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
    • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
    • Troubleshoot, fault isolate and document nonconformances.
    • Perform related rework and approved repair necessary to accomplish assignments
    • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
    • Perform self examination and inspection as certified and required.
    • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
    • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
    • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
    • Set up and maintain charts, logs, records and reports.
    • Maintain licenses, permits and certifications required to perform assigned work.
    • Perform other duties as assigned within the general job classification
    • Maintain a safe clean and orderly work area.

    As our ideal candidate, you will meet the following requirements:
    • High School Diploma or GED
    • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
    • Must be a U.S. Citizen.





     
     
    Job Number: 1610054052
    Job Location: Huntsville, AL
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 05/11/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Inventor Drafter

    Description:
    TOP SKILLS –
    1. Must be able to handle complex drawings and have good GD&T.
    2. Must pass CAD Test (will be drawing a couple of parts in Inventor that should not take someone more than 30min.)
    3. Ability to draw Gears and piping runs
    4. Recent working Inventor experience from any industry
    5. Strong Mechanical Drafting
    6. GD&T
    7. Will be converting 3D models to 2D
    8. Degree & Vault experience a Plus
     
    Job Number: CB-LC
    Job Location: Lynchburg, VA
    Rate: 30
    Per Diem: 0
    Overtime: Yes
    Duration: 2-6 Months
    Start Date: March 1st
    Input Date: 02/15/2017
    Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
    Attention: Andy Gill
    Address: 5620 INTERNATIONAL PKWY
    City, State: NEW HOPE, MN 55428-3047
    Phone: 763/577-9000
    Fax Phone: 763/577-9010
    Website: www.entegee.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 03/15/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    MASS/F&E Engineer

    Description:
    PDS Tech is seeking a Mass Engineer for an open position in Shelton, CT
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned). Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SME’s. Good ability to communicate work progress to the IPT CAM for Earned Value progress entry.
     





    Bachelor of Science Mechanical Engineering






     
    Job Number: 1610054755
    Job Location: Shelton, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000004BgmAAE&URLSource=cjhunter