Job Search Results

795 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/23 Sunday 03:26PM Pacific Time by ContractJobHunter. )

Listings 1 - 795

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Active Secret clearance needed-Test Engineer(NI Windows CVI and Labview) in Orlando, FL #1306AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Test Engineer Level 3
Job Number: 158498
Location: Orlando, FL
Compensation: DOE
Assignment Length: 12 month contract
Security Clearance (level): Secret
(Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes)
2nd shift

Description:
Designs, develops, and implements testing methods and equipment. Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices. Provides test area with parameters for sample testing and specifies tests to be performed. Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements. Responsible for test integration in the test area. Contributes to the completion of specific programs and projects. Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical issues associated with specific projects. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives..

Skill/Experience/Education
Mandatory:

**Must have experience in NI Windows CVI and LabView.**

Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or 3 years of professional experience with a related Master’s degree. Considered career, or journey, level.


Desired:
The desired candidate will be familiar with the recurring test engineering support of multiple mixed signal, electro-mechanical and electro-optical test stations as well have solid technical leadership skills.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) 1 2 3 4 5 Years Mandatory (Yes/No)

Electrical Engineering
Knowledge of Electro-Mechanical and Electro Optical principles to be applied to Test Station Solutions 0-3 Years Yes

Leadership Lead a small team in technical solutions and brief management 0-3 Years No

Testing Knows and has worked in the Test Engineering discipline No No
 
Job Number: #1306AS
Job Location: Orlando, Fl
Rate: 56.00/HR W2
Duration: 12 months
Start Date: ASAP
Input Date: 02/13/2017
Last Updated: 02/22/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 05/25/2017
Last Updated: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Aeronautical Engineer - Level 3

Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Must have a current ACTIVE secret clearance**

Job Description
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.
- The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
•Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
•The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
•You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five (5) years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position

Desired:
- 5 years of flight test experience.
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 6961
Job Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 02/06/2017
Last Updated: 04/05/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / stress analysis with active secret KY

Description:
Job Title: Aeronautical Engineer Level 3
Job Number: 157760/0177
Location: Lexington, KY
Compensation: 38-65/hr
Assignment Length: 12 month contract
Active secret required



Description
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Responsibilities include: •Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn •The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations •You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:

•Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs •Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position
Desired:

•Experience with Microsoft Office Suite (Word, Excel, PowerPoint) •Demonstrated previous success working in a team based environment to meet objectives •Government report or thesis writing experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Flight Test Experience with flight testing. 0-3 Years No
 
Job Number: DW-0177
Job Location: Lexington, KY
Rate: 65/hr max
Duration: 12 month contract
Input Date: 02/07/2017
Last Updated: 02/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: AV/Sea
Job Location: Seattle, wa
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 06/27/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 07/18/2017
Last Updated: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electrical Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

We are seeking a Sr Electrical Engineer to join our team in Seattle, WA. The qualified individual will have a broad Electrical Engineering background and possess leadership and technical experience in the aerospace industry, with an emphasis on safety. This candidate also must have experience providing clear direction, prioritizing tasks and communicating effectively with a diverse group of people.
Essential Functions:
• Coordinate system test and certification requirements.
• Comfortable working with ARINC 429 and ARINC 429 Data Analyzers
• Interpreting the raw ARINC 429 data
• Electrical Power System integration.
• Implementation on commercial aircraft with familiarity with MIL-STD-704
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
• Domestic and occasional international travel is required.
Desired Qualifications:
• 9+ years relevant work experience related to electrical systems integration and certification.
• Prefer experience with power generation, control, distribution and integration with the aircraft.
• Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
• Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Assurance Specialists - Ayer, MA

Description:
STS AeroStaff Services is currently hiring Aerospace Quality Assurance Specialists for open positions in Ayer, Massachusetts.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This position reports directly to the Quality Assurance Engineer/Manager. Primarily responsible, under minimum supervision, for inspection of incoming inspection, in-process inspection, and final inspection of materials and products in accordance with established company Quality Policies and Procedures, ISO requirements and customer specifications.

Job Duties:

• Must work independently or under minimal supervision in the performance of complex inspection tasks, extending to mechanical parts and assemblies, electro-mechanical assemblies and systems.
• Performs incoming inspection for all raw stock and procured components as well as manufactured parts applicable to all Product Lines.
• Monitors building of skids and boxes and inspects packing/packaging to drawings and specifications.
• Checks contents of final packaging against the parts list and bill of materials.
• Initiates status tags (Accept, Reject, Rework) and ECOs.
• Re-inspects reworked items and updates records accordingly.
• Maintains daily record of tests, surveillance and inspections.
• Submits reports to Quality Manager as required.
• Performs other duties as required or directed by Supervisory personnel.
• Creates reports for FAT, tool inspection, 1st articles, etc.

Qualifications:

• High School graduate and/or Technical degree.
• Programming ability for CMM’s, ASQ Certified Mechanical Inspector a plus.
• Minimum two years’ experience inspecting mechanical and electrical components to Military and Commercial Standards.
• Experienced in Incoming and In-Process inspection procedures, preferably in a shop fabrication environment using sampling plans per ANSI/ASQC Z1.4, where applicable.
• Ability to read and interpret complex drawings, military specifications and test procedures.
• Familiarity with geometric tolerancing/ANSI drawing symbols and tolerances, manufacturing methods and techniques, with a broad shop background in a recognized trade or craft (Aluminum/steel fabrication and Composite materials).
• Experienced in the use and application of Inspection tools and equipment, electronic test equipment, microscopes as well as computer skills in Microsoft Office programs to enter data and generate routine reports.
• Ability to lift 40 pounds.
• Willingness to work indoors and outside.
• Laser Tracker and/or Radar Tracker experience a plus.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37679
Job Location: Ayer, MA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/17/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2017
Last Updated: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/23/2017
Last Updated: 03/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler Technician(Repair & Overhaul)

Description:
Job Description:

• Performs precision assembly on complex production and repair actuators.
• Adjusts or aligns through shimming and other means of mechanical adjustments specified by blueprint or other specification limits.
• Utilizes a variety of mechanical measuring equipment such as: Dial Indicators, Calipers, and Micrometers to obtain proper assembly-build requirements.
• Maintain dimensional accuracy on assemblies utilizing torque wrenches, fixtures, tooling, gauges, and other measuring devices.
• Required to work from assembly instructions both written and oral.

Education:
High School Diploma or GED.
Preferred to have trade certificate from Aerospace Trade School (CRIMSON IS A POPULAR ONE IN THE TORRANCE AREA THAT MANAGERS PREFER)
**CRIMSON has changed its name to Spartan College of Aeronautics and Technology**
 
Job Number: 51229
Job Location: Torrance, CA
Overtime: yes
Duration: 7 months+
Input Date: 02/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Maintenance Program Specialists - Dallas, TX

Description:
STS AeroStaff Services is currently hiring Aviation Maintenance Program Specialists for open positions in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This resource will integrate all incoming and existing client Maintenance Program items into optimal MX intervals and check packages utilizing client and FAA requirements. They will be interacting with internal regulation teams, maintenance planners, production teams, and off site vendors (ATS, ATR). A&P mechanic experience is preferred.

Job Duties:

• Review Maintenance Program changes and related client documents and integrate with client's current MX intervals and check packaging.
• Coordinate with Engineering and other departments to ensure Maintenance Program is 100% compliant.
• Continuously analyze the Maintenance Program and eliminate unnecessary maintenance.
• Coordinate with Planning Department to effectively optimize maintenance check packaging.
• Coordinate with Reliability and Engineering to analyze A/C trends and identify gaps within the Maintenance Program.
• Assist Fleet Leads on optimization initiatives within the Maintenance Program.
• Execute directives set-forth by the Maintenance Programs Manager.
• Act as an advocate for program management processes, and holds self and others accountable for adhering to processes.
• Foster good working relationships and influence with peers in Engineering, Maintenance Projects, and any other operating departments.

Qualifications:

• Bachelor's degree preferred.
• Technical College coursework, engineering or finance related degree would be an asset.
• Minimum 5 years of maintenance experience, including two years in a Maintenance support related position.
• Experience with Maintenance Programs a plus.
• A&P license HIGHLY preferred.
• Thoroughly knowledgeable of the client maintenance program, or have relevant knowledge of maintenance programs in general through experience at another airline.
• A committed and passionate Leader of change.
• Process-minded.
• A strong analytical problem-solver, able to provide coaching for identifying practical approaches and real solutions to extremely complex problems.
• A strong communicator.
• Completely comfortable with computer applications such as Outlook, Microsoft Word, Excel, and PowerPoint.
• Open to foster other new and existing automation needs.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37652
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Maintenance Reliability Specialists - Dallas, TX

Description:
STS AeroStaff Services is currently hiring Aviation Maintenance Reliability Specialists for open positions in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This position will be dedicated to monitoring and measuring Mechanical Reliability of aircraft. Looking for opportunities to improve aircraft availability, improved dispatch reliability, and on time performance, etc. They will be responsible for taking raw data from Wizard, Trax and some Access. This analyst will be working within Tableau and creating dashboards from scratch. Altryx will be used to pull data from multiple sources and make it into a data file that is executable by Tableau. Candidates also must have intermediate proficiency in Excel – experience executing pivot tables, v-look up sand macros.

Job Duties:

• Perform data collection and validation on data elements required by the Reliability Program and Specialty Programs.
• Monitor aircraft and fleet reliability data for trends that could affect operations, participating in event investigations as required.
• Perform root cause analysis on data used to measure aircraft/fleet performance for safety, reliability and economic impact, and identify deficiencies in the Maintenance Program.
• Work closely with the Fleet Reliability Group to help develop corrective action plans to address adverse trends, performing follow-up on effectiveness of those plans, and provide detailed briefings to Senior Leadership at the monthly Reliability Control Board Meeting.
• Compile special ad hoc reports or studies where analysis of complicated or technical data is required; identify sources and extracts necessary information for reporting, developing customized computing solutions to aid in data access and presentation using a variety of software applications.
• Work closely with peers, and internal and external Customers to support Reliability Program and provide Reliability data, statistics, and analysis for aircraft performance related requests at an exceptional level of customer service.
• Develop customized computing solutions to aid in optimization prioritization and analysis using a variety of software applications such as Tableau, Altryx, Excel, and other software as necessary.

Qualifications:

• Hold a four year degree in an Aviation, Engineering, Mathematics, or Statistics related field; MBA preferred.
• 6 years of professional experience in Maintenance Programs and Reliability engineering in Aviation/Engineering related field, or equivalent, required.
• Previous experience with a client program for a 121 operator preferred.
• Must have a high level of experience with computing systems and the ability to plan for future computing needs.
• Experience creating meaningful visualizations to describe complex problems and solutions preferred.
• Airframe & Powerplant license and/or pilot experience highly preferred.
• Proficient in drawing conclusions from multiple data sources, translating those results into actionable objectives, and following through to execution and follow-up.
• Must be able to analyze data and prepare visualizations and reports using business intelligence tools and use excellent verbal and written skills to present results.
• Must be able to work under tight time constraints to accomplish assignments and projects with a positive attitude.
• Manages and coordinates multi-departmental presentations to affected work groups and Senior Leadership.
• Must have a high proficiency with Microsoft Suite with the ability to become proficient with other computer programs, including Business Intelligence tools.
• Comfortable delivering formal communication, both written and verbal, to various levels of the organization including Customers, Subject Matter Experts, and Leaders.
• Able to visualize, articulate, and condense complex initiatives, problems, concepts, etc., into concise, easily understood updates and/or presentations.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37651
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/14/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Technician

Description:
Responsibilities:

• Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.
• Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications / drawings.
• Candidate will utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and CMM’s.
• Approves or rejects items and documents inspection results as required. Communicates with internal customers as required to resolve inspection, engineering and manufacturing challenges.

Basic Qualifications:

• High School Diploma or GED.
• Minimum 5 years of in-process and final inspection experience.
• Must have PC-DMIS experience using direct CAD models.
• Minimum 3 years recent CMM inspection.
Preferred Skills and Experience:
• ISO 9001 / AS9100 experience a plus.
• Romer Arm experience is preferred but it is not required with sufficient PC-DMIS skills.
• Understanding of process control experience is a plus.
• AA Degree is preferred.
• Must be open to working any of the following shifts:1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 1st Shift (B) – T, W, Th, F, Sa – 5:00a - 3:30pm; 1st Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am with overtime as necessary.

Additional Requirements:
• Requires the ability to read and interpret engineering drawings and specification using ASME Y14.5.
• Experience with GD&T and skillful use of metrology tools and gages required.
• Experience with Microsoft applications including Word and Excel.
• Be able to lift a minimum of 25lbs on occasions.
• Stand, walk, push, pulls, reach overhead, and bend to the floor.
ITAR Requirements:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Location: Hawthrone, CA
Start Date: ASAP
Input Date: 10/07/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interiors Design Engineer

Description:
Unique Skills:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
 
Job Number: 24-134
Job Location: Savannah, GA
Rate: $55-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/31/2016
Last Updated: 02/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Joe
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: CS/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Consultant

Description:
Completions Mechanical Engineering Consultant

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-CATIA V5 and SmarTeam experience required
-Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
 
Job Number: 6898
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 03/15/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical/Liaison Engineering Consultant

Description:
Completions Mechanical/Liaison Engineering Consultant

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-CATIA V5 and SmarTeam experience required
-Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
-Experience in Aircraft Production cabin installation liaison duties
-Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
 
Job Number: 6899
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 04/05/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Calibration Technicians

Description:
JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

Duties:
Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
Must be able to work at heights.
 
Job Number: 353387
Job Location: Stratford, Ct.
Rate: open
Per Diem: Yes-If qualified
Overtime: Possible
Duration: 12 month +
Start Date: ASAP
Input Date: 11/30/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Installation Designer

Description:
Component Installation Designer:
The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will
work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired. Assignments in the Component Installation Section require the knowledge of electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematic, manufacturing practices as well as the
ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas,
lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations. LCA experience preferred.
 
Job Number: 6866
Job Location: Stratford, CT
Rate: Open
Per Diem: N/A
Overtime: Possible
Duration: 12-24 months
Start Date: 2/20/2017
Input Date: 02/15/2017
Last Updated: 02/20/2017
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Karen Lee
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III

Description:
Component Product Engineer II/III

Location: Canoga Park, CA
Pay Rate: DOE ($42/hr - $48/hr)
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **
** This is not a designer role **

Duties:
-Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.
-Candidates should have at least 3 years of related work experience.

Skills:
• 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
• 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
• 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
• 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
• 10%: Supplier integration with external vendors
• 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
• A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 7164
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/08/2017
Last Updated: 04/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III

Description:
Component Product Engineer II/III
Jupiter, FL
6 Month Contract
Pay Rate DOE


• Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
• Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
• Assignments typically have specified objectives and require the investigation of a limited number of variables.
• May make presentations to small audiences
• Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
• Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.
• May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

Skills:
• Ideal candidates would have 2 to 5 years of applicable expereince.
• General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
• Ability to read and interpret blueprints, technical drawings and specifications;
• Ability to communicate clearly and concisely in written and oral formats
• May require the use of engineering test equipment, CAD, and/or various computer systems.
• Ability to operate effectively in a team environment.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required. MSME/AE degree is highly desireable.
 
Job Number: 6771
Job Location: Jupiter, FL
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/15/2017
Last Updated: 03/21/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III / MUST have strong MS Project experience and scheduling experience CA

Description:
Job Title: Component Product Engineer
Job Number: 158436/6407842
Location: Canoga Park, CA
Compensation: 48/hr max
Assignment length: 6 month contract
Manager would like to see more candidates with strong MS Project and Scheduling experience.

Description:

** Candidates MUST have strong MS Project experience and scheduling experience **'

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.


Candidates should have at least 3 years of related work experience.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.


25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.


20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


10%: Develops trade studies, design concepts, systems integration and component-level test plans.


10%: Supplier integration with external vendors


10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Keywords:
Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: MB-6407842
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 02/27/2017
Last Updated: 03/08/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III CA

Description:
Job Title: Component Product Engineer II/III
Keywords:
Number of Positions: 3

Remaining Positions: 1

Duties:
Candidates with between 2 and 5 years of experience needed.

** Candidates must be U.S. Citizens **

** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **



** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise **



** Please include college Grade Point Averages on resumes **



** This is not a Designer role. It is more of a Project Engineer position **



• Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.

• Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.

• Assignments typically have specified objectives and require the investigation of a limited number of variables.

• May make presentations to small audiences

• Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.

• Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

• May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

Skills:
• Ideal candidates would have 2 to 5 years of applicable expereince.

• General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.

• Ability to read and interpret blueprints, technical drawings and specifications;

• Ability to communicate clearly and concisely in written and oral formats

• May require the use of engineering test equipment, CAD, and/or various computer systems.

• Ability to operate effectively in a team environment.



Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required. MSME/AE degree is highly desireable.


State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy

Start Date: 11/28/2016 Hours Per Week: 40.00
Est. End Date: 05/28/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-5822218
Job Location: Jupiter, FL
Rate: 50/hr max
Duration: 6 month contract
Input Date: 03/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineering Consultant- Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, Ga
Rate: $61.00 - $68.00/HR
Long Term contract


Unique Skills:
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6991
Job Location: Savannah, GA
Rate: $61-$68
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/27/2017
Last Updated: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Technicians - Arlington, TX

Description:
STS AeroStaff Services is currently hiring Customer Service Technicians for open positions in Arlington, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Customer Support Service Technician installs PC's and related hardware, investigates hardware problems, and performs minor system hardware and communication connection repairs. Additionally, this position performs basic diagnostic testing, assists in problem solving and resolution of trouble reports repairs, and restores faulty equipment to proper levels of functionality. Other responsibilities include the preparation of reports and documentation as required to support company ISO quality standards, and regular maintenance to ensure equipment operates properly.

Job Duties:

• Provide Support in the Setup, Installation, and Configuration of Computers and other Hardware that is part of Customer Deliverables.
• Diagnose and Resolve any Problems that might arise in these systems.
• Perform Installation and Maintenance trips for all systems.
• Assist in Customer Support and Training for installed systems.
• Assist with the Packing and Shipping of contract material.
• Assist with the daily in house shipping requirements for in support of customer service and installation.
• Write Technical Reports and Read and Follow Test Plans and Procedures.
• Follows Blueprints, Guidelines and/or Diagrams to ensure Product Specifications and Tolerance Levels are met.
• Test and Integrate Components per customer orders.
• Operate production equipment.
• Troubleshoot and Repair returned equipment.
• Configure and Load Computers per customer request
• Additional requirements as directed by the Customer Service Manager.

Qualifications:

• High School Diploma or GED is required.
• Minimum 3 years technical experience required in troubleshooting, testing and maintenance of commercial and computer equipment.
• Ability to read schematics, wiring diagrams, and assembly type drawings required.
• Must be able to use a wide variety of hand tools.
• Must be computer literate with knowledge of MS Office, computer assembly, configuration and support.
• Mechanical, electrical and electronic assembly experience desired.
• 50% travel to customer sites is required.
• Spanish language is a plus but not required.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37557
Job Location: Arlington, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/03/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Technicians - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Customer Service Technicians for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Customer Support Service Technician installs PC's and related hardware, investigates hardware problems, and performs minor system hardware and communication connection repairs. Additionally, this position performs basic diagnostic testing, assists in problem solving and resolution of trouble reports repairs, and restores faulty equipment to proper levels of functionality. Other responsibilities include the preparation of reports and documentation as required to support company ISO quality standards, and regular maintenance to ensure equipment operates properly.

Job Duties:

• Provide Support in the Setup, Installation, and Configuration of Computers and other Hardware that is part of Customer Deliverables.
• Diagnose and Resolve any Problems that might arise in these systems.
• Perform Installation and Maintenance trips for all systems.
• Assist in Customer Support and Training for installed systems.
• Assist with the Packing and Shipping of contract material.
• Assist with the daily in house shipping requirements for in support of customer service and installation.
• Write Technical Reports and Read and Follow Test Plans and Procedures.
• Follows Blueprints, Guidelines and/or Diagrams to ensure Product Specifications and Tolerance Levels are met.
• Test and Integrate Components per customer orders.
• Operate production equipment.
• Troubleshoot and Repair returned equipment.
• Configure and Load Computers per customer request
• Additional requirements as directed by the Customer Service Manager.

Qualifications:

• High School Diploma or GED is required.
• Minimum 3 years technical experience required in troubleshooting, testing and maintenance of commercial and computer equipment.
• Ability to read schematics, wiring diagrams, and assembly type drawings required.
• Must be able to use a wide variety of hand tools.
• Must be computer literate with knowledge of MS Office, computer assembly, configuration and support.
• Mechanical, electrical and electronic assembly experience desired.
• 50% travel to customer sites is required.
• Spanish language is a plus but not required.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37558
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/03/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Engineer (TSI)

Description:
Data Integrity Engineer (TSI)

Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Long Term contract


Unique Skills:
- Check 3D engineering data for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
- Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6945
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 02/14/2017
Last Updated: 03/28/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Reporting to the Project Head, as the lead Design Engineer, you will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. You will also be responsible for preparing and delivering presentations to the customer as required.
• Technical responsibility for all design related tasks of the project while working with the following:
o Project Head to ensure that design tasks are properly managed to achieve end item deliverables in accordance with project plans
o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements
o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust product is developed
• Executes design activities including:
o Customer / Suppliers:
 Liaise with customer/Suppliers for all design related issues
 Foster strong customer relationships through accountability, transparency and credibility
 Assist with development and maturation of system procurement specification and statement of work
o Integration / Planning:
 Responsible and accountable for all design tasks and its completion dates
 Sets design priorities and objectives with a strong drive to meet expectations
 Communicates progress and roadblocks with the Integrated Product Team (IPT) and the Project Head
o Design Tasks
 Develops, reviews, recommends, coordinates design, design change activity with customer, other Company disciplines including production and manufacturing engineering
 Generates design documentation such as trade studies, tolerance stack-ups, interface agreements, installation and proximity sensing analysis
 Investigates design related issues and develops effective solutions
 Develop Landing Gear and Landing Gear mechanisms from customer specifications considering regulatory requirements and UTAS-LS Engineering methodologies.
 Generate design layouts, developmental and kinematic assemblies within Catia V5
 Utilize New Product Introduction tools to facilitate execution for design related tasks as required
 Present designs at internal and external design reviews to ensure the design meets requirements and expectations
 Develop and achieve agreement on Landing Gear interfaces with customers and suppliers.
o Problem Resolution
 Performs Engineering investigations into failures and participates in Root Cause and Corrective Action
 Ensure timely and satisfactory resolution of problems
o Compliance
 Ensures compliance to engineering methodologies by providing direction/guidance to the design team.
 Maintains compliance to ITAR and regulatory requirements
• Occasional travel between customer/suppliers locations.
• Maybe asked to complete other tasks based on skills and qualifications





Basic Qualifications
• Bachelor's degree in Mechanical or Aerospace Engineering required or a minimum of 10 years of experience in Landing Gear design and development
• Minimum of 10 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies
• Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
• Demonstrated ability to utilize Catia V5 with strong emphasis on solid modeling and kinematics
• Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
• Demonstrated ability to work directly with customers and suppliers
• Understanding of performance based specification requirements, requirements management and verification.
• In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
• Successful candidates must meet all requirements under ITAR & CCGP
• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
• US citizen, permanent resident alien or able to review all export-controlled technical information.
 
Job Number: 83719
Job Location: Independence, OH
Rate: 45 Per Hour
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/17/2017
Firm Name: YOH SERVICES
Attention: Jess McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
SUMMARY
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Designs and checks mechanical aircraft interior furnishing, structures and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Provides liaison engineering support.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

COMPETENCIES
To perform the job successfully, an individual should demonstrate the following competencies:

CORE COMPETENCIES
• Adaptability – Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications – Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, and keeps others informed and uses appropriate communication methods.
• Dependability – Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative – Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork – Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality – Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.
• Judgment – You display a willingness to make decisions, you exhibit sound and accurate judgment, you support and explain reasoning for decisions, you include appropriate people in decision-making process, and you make timely decisions.
• Job Knowledge – Competent in required job skills and knowledge, exhibits ability to learn and apply new skills, keeps abreast of current developments, requires minimal supervision, displays understanding of how job relates to others, and uses resources effectively.

SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Ability to check engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
• Strong communication and problem-solving skills.
• Strong time-management and organizational skills.
• Experience adhering to budget and project schedules.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
 
Job Number: 17-662
Job Location: DFW, TX
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / NX 10 CA

Description:
Job Title: Design Engineer
Job Number: 157682/4391
Location: Torrance, CA
Compensation: 50/hr
Assignment Length: 6 month contract

Description:

• Contribute to the development of new product requirements through consulting with customers and sales personnel.
• Validate conceptual problem solutions by performing trade studies and analyses.
• Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
• Operate as a key element in a team of creative, independent individuals.
• Represent Moog in a manner consistent with its technical reputation.
• Create reliable designs through a comprehensive experimental development test program.
• Document designs, analyses, and test results with accurate and concise reports
Required skills: • 5-8 years of design and development engineering experience
• Self-starter with strong analytical skills and a desire for constant improvement
• Excellent customer relations skills
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Team orientation and desire to participate in and contribute to a high functioning team
Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
 
Job Number: MB-4391
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 02/13/2017
Last Updated: 03/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer 3

Description:
This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


SKILLS / REQUIREMENTS
Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

Must be able to perform basic measurements and simple inspection processes

Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

CAD experience in CATIA or Pro-E a plus

Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

Must be able to write engineering reports that include analysis and results

Must have excellent verbal and written communication skills

Must be fluent in written and spoken English

Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

Knowledge of Microsoft Office products is essential

Proof of Education is required
US Citizenship Required
 
Job Location: Inglewood, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: Now
Input Date: 09/16/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker

Description:
Job Summary:
Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.

Basic Qualifications BS in Mechanical or Aerospace Engineering

• Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Working knowledge of materials and surface treatments.
• Strong communication skills
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
• Successful candidates must meet all requirements under ITAR & CCGP
• Demonstrated values in alignment with Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
• US citizen, permanent resident alien or able to review all export-controlled technical information.

Preferred Qualifications:

• Demonstrated knowledge of ASME Y14.100 and Y14.41.
• Landing gear experience.
• Knowledge of Root Cause Corrective Action.
• Open minded, pro-active, independent, quick learner with a strong desire to learn.
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 83724
Job Location: Independence, OH
Rate: 55 Per Hour
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/17/2017
Firm Name: YOH SERVICES
Attention: Jess McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Job Opportunity in Torrance, CA #4391AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Design Engineer
Job Number: 157682
Location: Torrance, CA
Compensation: 50.00/hr W2 Ceiling rate
Assignment Length: 6 month contract

Description:

• Contribute to the development of new product requirements through consulting with customers and sales personnel.
• Validate conceptual problem solutions by performing trade studies and analyses.
• Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
• Operate as a key element in a team of creative, independent individuals.
• Represent Moog in a manner consistent with its technical reputation.
• Create reliable designs through a comprehensive experimental development test program.
• Document designs, analyses, and test results with accurate and concise reports

Required skills:

• 5-8 years of design and development engineering experience
• Self-starter with strong analytical skills and a desire for constant improvement
• Excellent customer relations skills
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Team orientation and desire to participate in and contribute to a high functioning team

Scope:
Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.

Education:

• Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.

Other Requirements
Experience with Unigraphics NX is a plus, but not a hard requirement.

Moog specifically uses NX10.

Anyone who is comfortable using 3D CAD software can pick it up fairly easily, just requires additional training.
 
Job Number: #4391AS
Job Location: Torrance, CA
Rate: 50.00/hr W2
Duration: 6 Months+
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 02/22/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone

Description:
Airframe Systems Integration Zone

Location: Savannah, GA
Duration: Long Term Contract
Pay Rate: $60/hr - $65/hr
Shift: First

Position Purpose:
The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions:
1. Manages Installation Design of primary aircraft barrel assemblies.
2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
3. Manages the coordination and development of parts, planning, tooling & purchase orders.
4. Has oversight over the release of engineering documentation.
5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
6. Reviews engineering and manufacturing release criteria.
7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Experience in communicating with employees/teams in productive and efficient manner.
3. Ability to work independently and cross-functionally.
4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
5. Ensures designs meet customer criteria, quality standards and FAA requirements
6. Knowledge of industry design and documentation standards.
7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
8. Experience with mechanical assemblies and manufacturing technique design.
9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
10. Performs other duties as assigned
11. CATIA Knowledgeware and SmarTeam experience desirable.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 6814
Job Location: Savannah, GA
Rate: 60-65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2017
Last Updated: 03/15/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 02/14/2017
    Last Updated: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Drafters - Virginia Beach, VA

    Description:
    STS AeroStaff Services is currently hiring Drafters for open positions in Virginia Beach, Virginia.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Duties:

    • Successful execution recruiting activities including, but not limited to sourcing, screening, qualifying, interviewing, comp analysis and formulating and extending offers.
    • Effectively evaluate employment factors such as job experience, education and training, skills, knowledge and abilities, physical and personal qualifications, and other data pertinent to classification, selection, and referral.
    • Partner with compensation to evaluate employment factors such as job experience, education and training, skills, knowledge and abilities other data pertinent to selection.
    • Prepare recommendations on starting salaries and extend job offers to most qualified candidates.
    • Provide applicants with critical information about the company to close applicants and provide candidates with onboarding expectations.
    • Ensure adherence to OFCCP process compliance.
    • Acts with a sense of urgency.

    Qualifications:

    • The individual must have a strong knowledge of AutoCAD Electrical, Autodesk Inventor and AutoCAD Mechanical.
    • The individual must be able to complete drawings that fall within the Assembly, fabrication, electrical and source control drawing formats.
    • The individual must be able to create all drawings in accordance with American Society of Mechanical Engineers (ASME) drafting practices.
    • Excellent sourcing and talent management experience.
    • Exceptional business process, analytical skills, and attention to detail.
    • Excellent written and verbal communication skills.
    • Strong interpersonal and relationship management skills.
    • Ability to adapt to changing business environment and requirements.
    • Demonstrated ability to command the attention and respect of leadership, ability to create and manage strategic alliances and drive the hiring process.
    • Unwavering ethics and values; trusted business partner.
    • Team player; focused on organizational and team success.
    • Never satisfied with status quo; always pushing for improvements and change.
    • Courageous; takes calculated risks.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37629
    Job Location: Virginia Beach, VA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 02/10/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Responsible for the design, modeling, development and testing of a system. Develops functional requirements. Understands and applies standard engineering principles. Creates simulations and prototypes to evaluate preliminary designs and test how a machine, structure or system operates. Designs and tests components, and integrates components to produce final product. Monitors quality of products and controls the efficiency of processes. Evaluates a design's overall effectiveness, cost, reliability, and safety. Investigates root causes of failures to maintain quality and recommend improvements.


    Supports the design, development, and integration of embedded electronic circuits into battery operated, low energy and light weight portable system.
    • Strong design background in analog circuits; op-amps, AtoD, DtoA, timers, constant current sources, motor controls, FETs in addition to digital design experience.
    • Work activities include designing, prototyping, and developing new technologies that seamlessly works together, while driving proof of concepts into production intent solutions.
    • Use of robust design tools like schematic capture, Layout concerns, PSPICE, OPEX, LEAN engineering, failure mode analysis, tolerance stack ups, risk management, and worst case analysis will be needed.
    • Experience should include standard electrical design tools and equipment including meters, scopes, data acquisition, thermal, conducted and radiated emission devices.
    • Works with cross functional teams including software, mechanical, suppliers, sourcing, manufacturing, test labs, approval labs, and other engineering functions to design, develop, and deliver solutions.
    • Project management including tracking personal electronic schedule, risk mitigation of designs, coordination with suppliers and sourcing.
    • Hands on self-motivated individual that is accountable for creation, capture and reuse of knowledge with strong communication skills, providing timely deliveries of assigned tasks.
    • In addition to embedded real time solutions, experience developing physical interfaces for I2C, SPI, UART, CAN, RS485 and other similar peripherals is useful.
    • Hands on experience or key understanding of programming languages including C., C++, scripting, and APIs is a plus.
    • Experience working with FDA or other regulatory industries is beneficial.
    • Bachelors of Science with 5+ years of experience in developing embedded hardware circuits.
     
    Job Number: EE
    Job Location: Portage, MI
    Rate: $55-$60
    Per Diem: Yes
    Overtime: Possible
    Duration: 6-12 Months
    Start Date: ASAP
    Input Date: 02/17/2017
    Firm Name: AMERICAN CONTRACT GROUP
    Attention: Derek Doucette
    Address: 50 HIGH ST STE 46
    City, State: NORTH ANDOVER, MA 01845
    Phone: 978/984-5581
    800 Phone: 877/723-9087
    Fax Phone: 978/208-8246
    Website: www.americancontractgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Electrical Systems Engineer

    Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Long Term contract


    Unique Skills:
    1) AutoCad required Catia V5 preferred
    2) G650 and G500 electrical system design experience preferred.
    3) 14 CFR 25 Subpart H - EWIS experience preferred
    4) Part 25 Certification Experience for Cabin Interiors preferred
    5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6) Experience with power distribution, lighting, switching, sizing and routing.
    7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8) Familiarity with aircraft STC procedures preferred.

    Job Description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7041
    Job Location: Savannah, GA
    Rate: $58.00 - $64.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/14/2017
    Last Updated: 06/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Technician

    Description:
    One year in length
    Maximum Hourly pay rate $18.00
    Tests and troubleshoots electronic products using standard and specialized test equipment. 

    1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
    2. Sets up test equipment and tests electronic products using established test procedures and schematics
    3. Provides technical guidance to assemblers and re-work assemblers 
    4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

    5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
    6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
    7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
    8. Recommends and/or proposes process improvements 
    8. Ensures that all relevant quality information/feedback is provided 
    10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
    11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
    12. Keeps workstation, tools and equipment in a neat and orderly manner 
    13. Understands and complies with all Company, safety rules and regulations

    Requirements/Knowledge: 

    v Education Required:
    o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

    v Experience 
    o 1-3 years of electronics related experience

    v Skill Level Required: 
    o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

    o Should have a high level of electrical and mechanical aptitude and analytical skills
    o Ability to interpret drawing and specifications
    o Basic computer skills
    o Knowledge of manufacturing processes and how to effectively troubleshoot problems
    o Should possess dexterity skills, good hand & eye coordination 
    o Willing and able to take and pass basic electronics test 

    Desired Qualifications:

    v Past experience in a manufacturing environment
    v Past experience in a self-directed teaming environment
    v Lean manufacturing knowledge
    v Understanding of IPC-A-610 standards
     

     
    Job Number: 1710063131
    Job Location: Bohemia, NY
    Duration: 12 months
    Input Date: 01/31/2017
    Last Updated: 09/21/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing engineer

    Description:
    Electrical/Mechanical 3D Wire Routing Engineer – Engineer Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -3D wire routing
    -EWIS
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System -Satellite communications
    -Water System
    -Waste System
    -Cabin interior monuments
    -Seats

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6884
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/14/2017
    Last Updated: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III

    Description:
    JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

    Job Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

    Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

    Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

    5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

    Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

    Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

    Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

    Education:
    Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

    Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

    Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

    Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
     
    Job Location: Irvine, CA
    Rate: Open
    Per Diem: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 10/26/2016
    Last Updated: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Consultant- Custom Engineering

    Description:
    UNIQUE SKILLS
    Provide certification support, mechanical design engineering, or electrical design engineering, with extensive Gulfstream experience.

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 17-659-89601
    Job Location: Southeast
    Rate: $61.00 to $68.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 02/09/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Contractor Completions - Designer/Mechanical Engineering

    Description:
    Engineering Contractor Completions - Designer/Mechanical Engineering

    Location: Savannah, GA
    Pay Rate: $55/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -As a Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions on the G500:
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    -Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Function as a liaison with the shop on engineering issues.
    -What you'll bring to the team:
    • Create design and models using either CATIA V5, or AutoCAD and SmarTeam.
    • Employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Group Head &/or Team Lead(s).
    • End Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.

    Preferred skills:
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Microsoft Project, Word, Excel and Power Point.
     
    Job Number: 7052
    Job Location: Savannah, GA
    Rate: 55.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/13/2017
    Last Updated: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II (Valves)

    Description:
    Engineering Designer II (Valves)

    Location: Canoga Park, CA
    Rate: $35.00 - $38.00/HR
    3+ month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **
    ** Windchill experience is strongly preferred **
    ** Candidates must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - 5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems
    - Knowledge in the design of high pressure cryogenic, ambient and high temperature Valves preferred.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in an Engineering field or equivalent.
    - MS degree is desired.
     
    Job Number: 7013
    Job Location: Canoga Park, CA
    Rate: $35.00 - $38.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 01/30/2017
    Last Updated: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II / Valves CA

    Description:
    Job Title: Engineering Designer
    Job Number: 158435/6018120
    Location: Canoga Park, CA
    Compensation: 38/hr max
    Assignment length: 5 month contract


    Description:

    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **

    ** Windchill experience is strongly preferred **

    ** Candidates must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems **

    ** Candidates must be U.S. Citizens ** ** Permanent residents are NOT eligible for this role ** ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.


    5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems


    Knowledge in the design of high pressure cryogenic, ambient and high temperature Valves preferred.



    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.


    Education:
    BS degree in an Engineering field or equivalent.
    MS degree is desired.
     
    Job Number: MB-6018120
    Job Location: Canoga Park, CA
    Rate: 38/hr max
    Duration: 6 month contract
    Input Date: 02/07/2017
    Last Updated: 03/01/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $55.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **
    **Windchill experience is strongly preferred **

    - Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
    - 8 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems
    - Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware preferred.
    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


    Skills:
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - BS degree in an Engineering field or equivalent.
    - MS degree is desired.
     
    Job Number: 7012
    Job Location: Canoga Park, CA
    Rate: $55.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 01/30/2017
    Last Updated: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Engineering Designer IV

    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    6 month contract

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates should have experience specifically with flight electronics packaging for space applications **
    ** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
    ** Candidates should be able to design from concept to a drawing released in Creo **

    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
    - Position will support various different Electric Propulsion programs

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: 6990
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 03/13/2017
    Last Updated: 04/25/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / CREO GD&T Windchill CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158376/6018126
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:

    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5) **



    **Windchill experience is strongly preferred **



    ** Candidates must be U.S. Citizens **

    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



    Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



    8 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems

    Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware preferred.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



    Skills:

    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

    Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

    Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

    Must be able to prepare and make presentations at both internal and customer design reviews.
    Education:
    BS degree in an Engineering field or equivalent.
    MS degree is desired.
     
    Job Number: MB-6018126
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 04/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

    Description:
    Job Title: Engineering Designer IV
    Job Number: 158326/6312362
    Location: Canoga Park, CA
    Compensation: 60/hr max
    Assignment Length: 6 month contract

    Description:


    Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

    ** Candidates should be able to design from concept to a drawing released in Creo **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

    Perform engineering design tasks related to space electronics based products.
    Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
    Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

    Skills:
    Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
    Familiarity with aerospace/defense engineering design and production processes and disciplines.
    Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Keywords:
    Education:
    Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
     
    Job Number: MB-6312362
    Job Location: Canoga Park, CA
    Rate: 60/hr max
    Duration: 6 month contract
    Input Date: 04/21/2017
    Last Updated: 04/24/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer V

    Description:
    Engineering Designer V

    Location: Canoga Park, CA
    Rate: $65.00 - $67.00/HR
    6 month contract


    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Duties:
    ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5). Windchill experience is strongly preferred **

    ** Candidates MUST have experience with high pressure valves and rocket propulsion **

    ** This is a Level 5 role so candidates MUST have Leadership skills **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    - Candidates must have experience with Creo & GD&T.
    - Windchill experience strongly preferred.
    - Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    - Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    - Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    - Must be able to interface well with other members of project or program team. management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    - 10+ years of direct experience required.
    - BS degree in Engineering or equivalent.
    - MS degree is desired.
     
    Job Number: 7003
    Job Location: Canoga Park, CA
    Rate: $65.00 - $67.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 01/25/2017
    Last Updated: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer V / lead design and development engineer / CREO GD&T high pressure valves and rocket propulsion CA

    Description:
    Job Title: Engineering Designer V
    Job Number: 158334/6016201
    Location: Canoga Park, CA
    Compensation: 67/hr max
    Assignment Length: 5 month contract

    Description:


    Duties: ** Candidates MUST have experience with Creo and GD&T (also known as Geometric Dimensioning & Tolerencing or ASME 14.5). Windchill experience is strongly preferred **

    ** Candidates MUST have experience with high pressure valves and rocket propulsion **

    ** This is a Level 5 role so candidates MUST have Leadership skills **

    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing's for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:
    Candidates must have experience with Creo & GD&T.
    Windchill experience strongly preferred.
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
    Engineers also required to analyze and verify product design and performance for adequacy and reliability.
    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
    Must be able to prepare and make presentations at both internal and customer design reviews.

    Keywords:
    Education:
    BS degree in Engineering or equivalent.
    MS degree is desired.
     
    Job Number: MB-6016201
    Job Location: Canoga Park, CA
    Rate: 67/hr max
    Duration: 6 month contract
    Input Date: 03/10/2017
    Last Updated: 03/29/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Entry Level Development Engineer- US Citizen Only

    Description:
    A Development Engineer job in Warsaw, IN is available courtesy of Adecco Engineering and Technology. You will be supporting management in order to meet performance and quality requirements. You will need a strong design background. You will need to have five years of experience within the medical device industry.

    Development Engineer job responsibilities include:
    * New Product Development and Development
    * Experience in establishing process methods to meet performance and quality requirements
    * Familiarity with control procedures such as the Engineering Change Notification and Deviation Process
    * Knowledge of blueprint reading and geometric dimensioning
    * Must have developed process expertise in two of the following areas: machining, casting, finishing, packaging, tool design, programming, thermal processing/vacuum furnaces, or spray technologies.

    Qualifications:
    * Minimum education requirement is a bachelor’s degree in biomedical or mechanical engineering, other engineering science, or combination of education and experience (additional business degree is a plus).
    * Candidates must have excellent oral and written communication skills.
    * Ability to balance marketing, manufacturing, and design requirements to meet customer requirements
    * CNC programming, Computer Aided Design Systems, and Unigraphics 3-D modeling software are not required, but preferred.

    If you are interested in this Development Engineer job in Warsaw, IN then please click APPLY NOW. For other opportunities available at Adecco Engineering and Technology go to www.adeccousa.com. If you have questions about the position please Collin Ponzo at (904) 748.6053 or collin.ponzo@modis.com

    Equal Opportunity Employer Minorities/Women/Veterans/Disabled
     
    Job Number: 6899
    Job Location: IN
    Rate: 27.00
    Per Diem: No
    Overtime: Yes
    Duration: 24+ Months
    Start Date: ASAP
    Input Date: 02/07/2017
    Firm Name: ADECCO ENGINEERING & TECHNICAL
    Attention: Collin Ponzo
    Address: 2101 4TH AVE STE 1335
    City, State: SEATTLE, WA 98121
    Phone: 904/748-6053
    Website: www.modis.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

    Description:
    Job Title: Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
    Job Number: 158370/1286
    Location: Orlando, FL
    Compensation: 75/hr
    Assignment Length 12 month contract
    Secret Clearance

    Description:

    Mechanical Structures / Dynamics Engineer:

    Perform stress analysis for flight structures and ground test support equipment’s.

    Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.

    Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.

    Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.

    Requires good verbal and written communication skills, and ability to work in a team environment.

    Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

    Skill/Experience/Education
    Mandatory:

    Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

    Desired:

    Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills PRO E and/or CATIA skills
     
    Job Number: DW-1286
    Job Location: Orlando, FL
    Rate: 75/hr max
    Duration: 12 month contract
    Input Date: 02/03/2017
    Last Updated: 02/23/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Description:
    Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

    Location: Orlando, FL
    Duration: 1 year contract
    Pay Rate: $65/hr - $75/hr (DOE)
    Shift: 1st, 9/80
    **Must have an Active Secret Clearance**


    Job Description:
    -Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
    -Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
    -Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
    -Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
    -Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
    -Requires good verbal and written communication skills, and ability to work in a team environment.
    -Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
    -Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


    Mandatory Skills:
    -Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


    Desired Skills:
    -Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
    -PRO E and/or CATIA skills
     
    Job Number: 7019
    Job Location: Orlando, FL
    Rate: 65.00-75.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 01/31/2017
    Last Updated: 12/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 09/09/2017
    Last Updated: 10/06/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/15/2017
    Last Updated: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Education/Experience
    Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-156
    Job Location: Savannah, GA
    Rate: $56-$67/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 09/25/2017
    Last Updated: 11/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Savannah, GA
    Pay Rate: $56/hr - $67/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
    -Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    -Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6952
    Job Location: Savannah, CA
    Rate: 56-67
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/12/2017
    Last Updated: 10/03/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 02/19/2017
    Last Updated: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 10/27/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Manufacturing Engineer II

    Description:
    Flight Test Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    Production planning and shop floor support.

    Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Education and Experience Requirements:
    Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.
     
    Job Number: 7080
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/16/2017
    Last Updated: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Lab - Mechanical Subsystems

    Description:
    Johnson Service Group has 2 openings for a Ground Test Lab for a 2-year contract for our client in Stratford, CT!!!

    Description:
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned).
    Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SMEs.
    Good ability to communicate work progress to the IPT CAM for Earned Value progress entry. The candidate must possess the ability and experience to provide technical oversight and review of supplier generated drawing package and 3D CATIAV5 (LCA) models.
    Ability to work in an IPT team environment (with system engineering, structural analysts, weight/balance engineer, materials, manufacturing, test, team members) with good communication skills is a must.
    Tracking status and monitoring progress of external design center drawing packages and similar tasking will be required.
    Education: Bachelor of Science Mechanical Engineering
     
    Job Number: 352682
    Job Location: Stratford, CT
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 03/22/2017
    Last Updated: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 04/24/2017
    Last Updated: 05/11/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Inventor Drafter

    Description:
    TOP SKILLS –
    1. Must be able to handle complex drawings and have good GD&T.
    2. Must pass CAD Test (will be drawing a couple of parts in Inventor that should not take someone more than 30min.)
    3. Ability to draw Gears and piping runs
    4. Recent working Inventor experience from any industry
    5. Strong Mechanical Drafting
    6. GD&T
    7. Will be converting 3D models to 2D
    8. Degree & Vault experience a Plus
     
    Job Number: CB-LC
    Job Location: Lynchburg, VA
    Rate: 30
    Per Diem: 0
    Overtime: Yes
    Duration: 2-6 Months
    Start Date: March 1st
    Input Date: 02/15/2017
    Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
    Attention: Andy Gill
    Address: 5620 INTERNATIONAL PKWY
    City, State: NEW HOPE, MN 55428-3047
    Phone: 763/577-9000
    Fax Phone: 763/577-9010
    Website: www.entegee.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 03/15/2017
    Last Updated: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 03/15/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MECHANICAL DESIGN ENGINEER

    Description:
    Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

    seeking a mechanical engineer to join our engineering team at the Starfire Optical Range (SOR) at Kirtland
    Airforce Base (KAFB), New Mexico.

    This person will supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

    Skills:
    - Experience with structural analysis of large moving structures.
    - Experience with Finite element analysis tools for predicting thermo-mechanical stability, like Ansys/FEMAP.
    - Proficiency with 3D CAD design packages, like Solidworks/Inventor and Autocad.
    - Experience in thermal management and fluid dynamics of cooled cameras and vacuum chambers is highly desired.
    - Experience with opto-mechanical design of optical systems and optical component assemblies is highly desired.
    - Experience with the mechanical tolerance of optical systems (mechanical, optical, thermal) is highly desired.
    - Familiarity with Zemax and basic optical design is highly desired
    - Applicants must have good communication, analytical, and organizational skills and be able to work in a team
    environment.
     
    Job Number: 27229
    Job Location: NM
    Rate: OPEN
    Per Diem: NO
    Overtime: POSSIBLE
    Duration: LT
    Start Date: ASAP
    Input Date: 02/13/2017
    Firm Name: TRIAD SYSTEMS
    Attention: DAN
    Address: 23801 CALABASAS RD STE 2022
    City, State: CALABASAS, CA 91302
    Phone: 818/222-6811
    800 Phone: 800/820-6811
    Fax Phone: 818/222-0116
    Website: www.triadsystems.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Machine Design Engineer

    Description:
    Keys: BSME a must - Mechanical Design Engineer, 3D Inventor, Hydraulics, Pneumatic, Motion controls , Machine Design – Must have Inventor

    ** OEM Machine design a MUST

    Machine Design Engineers, Inventor / Solid Works Experience
    5+ years experience
    Must have relevant Machine Design exp – Pneumatics/Hydraulics /heavy machinery

    5 YEARS EXP – Not looking for Sr guys – Mid level ideal
    Since 1917, Globe Machine has been a manufacturer of industrial machines, systems, and plants for advanced composites, building products, and pulp & paper.

    • Utilize AutoCAD computer-aided design, including AutoCAD Inventor (3D) system and peripheral equipment to generate complex layouts of new and existing equipment and design concepts.

    • Draft detailed working drawing of machinery and mechanical devises indicating dimensions and tolerances and other engineering data.


    • Working knowledge of AutoCAD 2012 and Microsoft Office required. Inventor 2012 or SolidWorks and MS Project desired.

    • Knowledge of mechanical, electrical, hydraulic, pneumatic, motion and control components required.
     
    Job Number: AG-HD
    Job Location: Tacoma, WA
    Rate: 40-45+- (OPEN)
    Per Diem: No
    Overtime: No
    Duration: 3-4 mos, possible 6 mon extension
    Start Date: ASAP
    Input Date: 02/15/2017
    Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
    Attention: Andy Gill
    Address: 5620 INTERNATIONAL PKWY
    City, State: NEW HOPE, MN 55428-3047
    Phone: 763/577-9000
    Fax Phone: 763/577-9010
    Website: www.entegee.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Location: Denver, CO
    Rate: $45.00/HR
    1 year contract

    **Looking for LOCAL candidates**

    **Candidates MUST have a Bachelor's Degree**

    **Candidates MUST have 2+ years of experience with manufacturing and assembly processes used to manufacture high reliability components including cable harnesses, RF/microelectronics, Antennas, Circuit Cards, modules and box assemblies for aerospace applications.**


    Position Description
    This Manufacturing Engineering position requires familiarity with manufacturing processes used to manufacture high reliability components including cable harnesses, RF/microelectronics, Antennas, Circuit Cards, modules and box assemblies for aerospace applications. Understanding engineering drawings, processing constraints and techniques for electronics products coupled with innovative thinking is required. Responsibilities include determining sequence of build, selecting or designing required tools, solving production problems and developing working relationships with multi-disciplined team of people who are dedicated to effectively and efficiently planning and building electronic assemblies. Knowledge base should include familiarity with complex harness assemblies, SAP or VE-CAMs routings, SAP or VE-CAMs MBOMs, and non-conformance processing.

    Skills Required
    •Ability to read and interpret assembly drawings and define manufacturing steps to meet all requirements.
    •Experience Generating Manufacturing Work Instructions
    •Understanding of industry standards e.g. IPC, J-STD, LM MAPs, MIL-Spec., etc.
    •Familiarity with electronic manufacturing processes (crimping, wire termination, sleeving, lacing, Wire bonding, adhesive dispensing, SMT, PTH, Bonding, Coating, X-Ray, AOI, etc.)
    •Non conformance processing (i.e. defect disposition, cause and corrective action, etc.)
    •Experience managing Bills of Material
    •Experience in a manufacturing environment
    •General computer skills (MS Office Suite Software)

    Skills Preferred
    •Familiarity with SAP (Qnotes, Routings, Bills of material)
    •Familiarity with Company tools(EPDM, PMP Database, SAP, IDS etc.)
    •Defect trending
    •Hands on experience with solder, wiring, torque, epoxy bonding, and other electronics assembly processes
    •Lean or Six Sigma experience
    •New Process development and experience validating processes for flight applications

    Experience Required
    - 2+ years experience

    Education Required
    - BS degree in Mechanical Engineering or a related field

    Additional Information
    - Looking for local candidates
     
    Job Number: 6688
    Job Location: Denver, CO
    Rate: $45.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 02/10/2017
    Last Updated: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Location: Denver, CO
    Rate: $45.00/HR
    1 year contract

    **Looking for LOCAL candidates**

    **Candidates MUST have a Bachelor's Degree**

    **Candidates MUST have 2+ years of experience with manufacturing and assembly processes used to manufacture high reliability components including cable harnesses, RF/microelectronics, Antennas, Circuit Cards, modules and box assemblies for aerospace applications.**


    Position Description
    This Manufacturing Engineering position requires familiarity with manufacturing processes used to manufacture high reliability components including cable harnesses, RF/microelectronics, Antennas, Circuit Cards, modules and box assemblies for aerospace applications. Understanding engineering drawings, processing constraints and techniques for electronics products coupled with innovative thinking is required. Responsibilities include determining sequence of build, selecting or designing required tools, solving production problems and developing working relationships with multi-disciplined team of people who are dedicated to effectively and efficiently planning and building electronic assemblies. Knowledge base should include familiarity with complex harness assemblies, SAP or VE-CAMs routings, SAP or VE-CAMs MBOMs, and non-conformance processing.

    Skills Required
    Ability to read and interpret assembly drawings and define manufacturing steps to meet all requirements.
    Experience Generating Manufacturing Work Instructions
    Understanding of industry standards e.g. IPC, J-STD, LM MAPs, MIL-Spec., etc.
    Familiarity with electronic manufacturing processes (crimping, wire termination, sleeving, lacing, Wire bonding, adhesive dispensing, SMT, PTH, Bonding, Coating, X-Ray, AOI, etc.)
    Non conformance processing (i.e. defect disposition, cause and corrective action, etc.)
    Experience managing Bills of Material
    Experience in a manufacturing environment
    General computer skills (MS Office Suite Software)

    Skills Preferred
    Familiarity with SAP (Qnotes, Routings, Bills of material)
    Familiarity with Company tools(EPDM, PMP Database, SAP, IDS etc.)
    Defect trending
    Hands on experience with solder, wiring, torque, epoxy bonding, and other electronics assembly processes
    Lean or Six Sigma experience
    New Process development and experience validating processes for flight applications

    Experience Required
    - 2+ years experience

    Education Required
    - BS degree in Mechanical Engineering or a related field

    Additional Information
    - Looking for local candidates
     
    Job Number: 6688
    Job Location: Denver, CO
    Rate: 45.00
    Per Diem: No
    Overtime: Possible
    Duration: 1 Year
    Start Date: ASAP
    Input Date: 02/10/2017
    Last Updated: 02/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer $34hr++- Long Term/Entry Level/ EAD ok

    Description:
    Job Summary
    Responsible for providing manufacturing engineering services to support cellular manufacturing and timely new product introductions. Engineering services include process development, cell management, tool design, and CNC programming.

    Principal Duties and Responsibilities

    Conducting feasibility study to estimate product cost and analyze capital equipment, capacity, and capability requirements affecting the make versus buy decision.
    Establishing process methods which meet performance and quality requirements.
    Establishing preliminary bill of materials and routers.
    Developing a wide a variety of applications, including machining, finishing, forging, casting, and molding.
    Sorting through options choosing the most appropriate processes and machining methods.
    Negotiating target completion dates with appropriate personnel from other departments.
    Developing project plans and schedules for work activities.

    Expected Areas of Competence (i.e. KSAs)
    Skilled and knowledgeable in manufacturing and new product processing.
    Familiarity with control procedures, such as the Engineering Change Notification (ECN) and Deviation process, Engineering Specifications (ESs), and Laboratory Procedures (LPs).
    Familiarity with drafting standards and geometric dimensioning and tolerancing.
    Ability to balance marketing, manufacturing, and design requirements to meet customer requirements.
    Ability to handle project assignments of medium scope and complexity and able to prioritize and complete work in a timely manner.
    Demonstrates good problem solving skills through the use of quality and statistical tools.
    Ability to effectively work within a team and cross functionally to expedite completion of critical project tasks.
    Demonstrates good written and verbal communication skills.
    Microsoft Office Suite and Project.
    Statistical Process Control skills.
    Proficient in process development, CNC programming, Computer Aided Design Systems, and Unigraphics 3-D modeling software.

    Education/ Experience Requirements
    B.S. in mechanical, industrial engineering or other engineering science, or an equivalent combination of education and experience.
     
    Job Number: 6898
    Job Location: IN
    Rate: 34.00
    Per Diem: YES
    Overtime: Yes
    Duration: 24+ Months
    Start Date: ASAP
    Input Date: 02/09/2017
    Firm Name: ADECCO ENGINEERING & TECHNICAL
    Attention: Collin PONZO
    Address: 2101 4TH AVE STE 1335
    City, State: SEATTLE, WA 98121
    Phone: 904/748-6053
    Website: www.modis.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 3

    Description:
    Manufacturing Engineer - Level 3

    Location: Clearwater/Pinellas Park/Oldsmar, FL
    Duration: 1 Year Contract
    Pay Rate: $35/hr - $45/hr (DOE)
    Shift: 2nd, 9/80 ; Overtime: Yes
    *Must be a U.S. citizen* *No clearance needed*

    Job Description:
    -Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT).
    -Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required.
    -Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
    -Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
    -Support the design change management activities of the IPT.
    - Analyze process defect data and trends and help define and implement corrective actions.
    -Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs, and configuration of the manufacturing bill of materials for manufacturability.
    -Interface with technical counterparts in other organizations both within and outside Clearwater Operations.

    Mandatory Skills:
    • IPC-A-610 training or J-STD-001 (MANDATORY)
    • Minimum 5 years manufacturing engineering experience in a technical role supporting the design and manufacturing of circuit card assemblies within an Integrated Product Team type of work environment.
    • Skill with surface mount technology and automated SMT build equipment.
    • Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
    • Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
    • Willingness to work overtime and during off-days occasionally as required to support production operations.

    Desired Skills:
    • Bachelor’s degree from an accredited University in Engineering.
    • Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to circuit card assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
    • Strong technical understanding of circuit card assembly producibility and process flow.
    • Specific experience with SAP and Solumina manufacturing execution system. Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
    • Experienced user of MS S/W applications including MS Word, Project, Excel, Visio, and Power Point.
    • MYDATA SMT pick & place machine equipment
    • Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis.
     
    Job Number: 6946
    Job Location: Clearwater, FL
    Rate: 35.00-45.00
    Per Diem: Possible
    Overtime: Yes
    Duration: 1 year
    Start Date: ASAP
    Input Date: 01/11/2017
    Last Updated: 02/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    SAP and Solumina experience highly preferred.


    Education and Experience Requirements:
    Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 7026
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/02/2017
    Last Updated: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer with active secret CA

    Description:
    Job title: Manufacturing Engineer
    Job Number: 158192/0329
    Location: Palmdale, CA
    Compensation: 45-65/hr(DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:


    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

    Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.

    Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

    May incorporate inspection and test requirements into the production plan.

    Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

    Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.

    Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies.

    Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:

    Thorough knowledge of Electrical/wiring manufacturing and associated processes.

    Tooling, fabrication and assembly manufacturing processes and procedures is a plus.

    Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA 4-5 Years No
     
    Job Number: DW-0329
    Job Location: Palmdale, CA
    Rate: 65/hr max
    Duration: 10 month contract
    Input Date: 02/27/2017
    Last Updated: 03/03/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    Mass Properties Engineer - FLC

    Location: Savannah, GA
    Rate: $56.00 - $67.00/HR
    Long Term contract


    Unique Skills:
    As an Engineering Consultant for Mass Properties, you will:
    • Perform mass properties analysis for production or new aircraft development programs.
    • Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
    • Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
    • Track and status structural or system weight versus target weights.
    • Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
    • Provide and report to management on Aircraft Weight and Balance status
    • Coordinate activities to insure weight targets/goals are met

    What you'll bring to the team:
    • Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
    • Apply people skills to provide optimum lightweight design concepts while working with an IPT team.
    • Experience with CATIA and SmarTeam is preferred.
    • Experience in estimating weights for composite structures using CPD or FiberSim is a plus.

    What the Mass Properties team does:
    • Structural weight
    • System weight
    • Target weights
    • Weight risk and opportunities
     
    Job Number: 6950
    Job Location: Savannah, GA
    Rate: $56-$67/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/15/2017
    Last Updated: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials, Process, and Physics Engineer

    Description:
    Defines requirements for materials, parts and processes used in the manufacture of products. Leads production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Leads development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision.

    M&P Mechanical Engineer to support multiple programs test activities. Responsibilities include:
    • Mechanical testing
    • Thermal testing
    • Fluids testing
    • Environmental testing
    • Test design
    • Test setup
    • Troubleshooting
    • Test analysis
    • Test procedure and test report writing

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in Mechanical Engineering.

    Experience in developing detailed test designs from system level specification requirements, test planning, execution and reporting test results.

    This position is normally for 1st shift however, 2nd or 3rd shift hours may be required for short durations to support testing.

    Must be US Person for purposes of Export Compliance.
     
    Job Number: 24697-1
    Job Location: AL
    Rate: open
    Per Diem: split
    Overtime: possible
    Duration: 6+ months
    Start Date: 2/2017
    Input Date: 01/19/2017
    Last Updated: 02/07/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    Mechanic

    Description:
    Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
    Will be operating a crane or fork lift.
     
    Responsibilities:
    Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
     
    Qualifications:
    • Knowledge of EHS procedures and policies
    • Knowledge and safe use of production related equipment
    • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
    • Millwright Skills and familiar with Electrical and/or Hydraulic
    • Able to interpret OEM handbooks and/or plant diagrams
    • Understanding of reading building plans and electrical schematics
    • Ability to use trouble-shooting and precision measuring equipment
    • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
    • Vocational or technical training in a maintenance related discipline, strongly preferred

     
    Training requirements:

    • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
    • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
    • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
    • Where applicable, complete safety and maintenance training and or certification

     
     
     
     
     

     
    Job Number: 1610060095
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 01/25/2017
    Last Updated: 09/21/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

    Mechanic Technician II

    Description:
    PDS Tech is seeking several mechanics for positions in Kansas City.
    Must have steel toed shoes/boots; all assignments are one year in length
    3rd Shift Position
     
     
     
    Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
      
     Operation of Overhead Cranes is involved in this job
    Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
    Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
    Knowledge of EHS procedures and policies
    • Knowledge of safe use manual equipment and hand tools for assigned product lines.
    • Working knowledge of use of inspection measurement equipment
    • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
    • Maintain acceptable defect rates
    • Successful completion of training requirements
    • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
    Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
    • Demonstrate ability to document and record inspection results per in-house procedures
    • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



    For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
     

     
    Job Number: 1610059718
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 11/07/2016
    Last Updated: 09/21/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    1 year contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description:
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Verify tolerance analysis on system components has been performed.
    - Work with Designer’s to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
    - Work closely with Mechanical Engineering to support all program objectives.

    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout, documentation and checking IAW ASME Y14.24 and familiar with MIL-T-3100 and MIL-STD-100.
    - Five (5) to ten (10) year’s experience of creating Pro-E/CATIA drawings and drawing release.
    - Proficiency with Pro-E/Windchill and Intralink is required.
    - Knowledge of LMC drawing release procedures is desired.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Previous LMC experience is a plus.
     
    Job Number: 7009
    Job Location: Orlando, FL
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 08/29/2017
    Last Updated: 10/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 06/20/2017
    Last Updated: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Duration: 6 month contract
    Shift: 1st Shift

    **Must have a current ACTIVE secret clearance or have had one within the last 2 years**

    Job Description:
    CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY.
    - This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications.
    - This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

    Skill/Experience/Education
    Mandatory:
    • Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
    • Experience with Catia V5 3D parametric modeling and drafting. Structural component and assembly design.
    • Perform detailed drawing checks and be responsible for completion of production ready drawings
    • Ability to work under little or no direct supervision
    • Demonstrated previous success working in a team based environment to meet objectives
    • Active DoD secret clearance

    Desired:
    • Any familiarity with structure of C130 aircraft, specifically C130J
    • Air Force customer experience
    • Experience or familiarity with engineering change documentation
    • Experience with Teamcenter PLM software
     
    Job Number: 6962
    Job Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 04/20/2017
    Last Updated: 05/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Orlando, FL
    Rate: $55.00/HR
    1 year contract

    **Must have a current ACTIVE secret clearance**

    Description
    - Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the System.
    - Perform weights and tolerance analysis on system components.
    - Work concepts and detail designs to fit Platform Requirements.
    - Designer will work the design layout, and follow-up working with mechanical analyst to ensure the design meets all requirements including Safety of Flight (SOF).
    - Additionally, the designer will work with the supplier during the design and manufacturing process to mitigate and production issues.
    - Work closely with Mechanical Engineering to support all program objectives.


    Skill/Experience/Education
    Mandatory:
    - BS degree in Mechanical Engineering, or equivalent related education and experience.
    - Experience with all aspects of mechanical design, including layout and design documentation.
    - 5 to 10 experience of creating PRO E/CATIA drawings and drawing release.
    - Proficiency with PRO E/CATIA and Intralink is required.
    - Knowledge of LMC drawing release procedures is desire.
    - Good knowledge of all aspects of Mechanical engineering is essential.
    - Ability to obtain a security clearance is mandatory.
    - Previous LMC experience is a plus.
     
    Job Number: 7018
    Job Location: Orlando, FL
    Rate: $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 02/06/2017
    Last Updated: 06/20/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 3

    Description:
    Mechanical Design Engineer - Level 3

    Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Duration: 9 month contract
    Shift: 1st Shift

    **Must have a current ACTIVE secret clearance or have had one within the last 2 years**

    Job Description:
    CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY.
    - This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications.
    - This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

    Skill/Experience/Education
    Mandatory:
    • Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
    • Experience with Catia V5 3D parametric modeling and drafting. Structural component and assembly design.
    • Perform detailed drawing checks and be responsible for completion of production ready drawings
    • Ability to work under little or no direct supervision
    • Demonstrated previous success working in a team based environment to meet objectives
    • Active DoD secret clearance

    Desired:
    • Any familiarity with structure of C130 aircraft, specifically C130J
    • Air Force customer experience
    • Experience or familiarity with engineering change documentation
    • Experience with Teamcenter PLM software
     
    Job Number: 6964
    Job Location: Lexington, KY
    Rate: $60.00 - $71.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 9 mos
    Input Date: 04/04/2017
    Last Updated: 04/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer / UG/NX CA

    Description:
    Job Title: Mechanical Design Engineer
    Job Number: 157711/4393
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract


    Description:

    Mechanical Design Engineer
    This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
    Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
    • Contribute to the development of new product requirements through consulting with customers and sales personnel
    • Validate conceptual problem solutions through trade studies and by applying sound engineering principles
    • Perform engineering calculations related to sizing, performance, tolerance and assembly
    • Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
    • Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
    • Support programs with some travel (5-10%) and the participation in presentations to customers
    • Represent Moog in a manner consistent with its leading-edge technical reputation
    • Create reliable designs through a comprehensive experimental development test program
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 6+ years of design and development engineering experience
    • Proficient in current versions of NX/UG computer-aided design software
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
    • Team-oriented, with the desire to participate in and contribute to a high functioning team
    Scope:
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
     
    Job Number: MB-4393
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 02/06/2017
    Last Updated: 03/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Job Description:
    The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense.
    Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures.
    Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met.
    Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

    Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.
    Guides the successful completion of major programs and may function in a project leadership role.
    Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.
    Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to management as well as customers.
    The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors.
    The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization.
    This position also requires an engineer familiar with design for manufacturing and producibility.


    Required Skills:
    • CAD software, especially Creo.
    • Geometric Tolerancing (GD&T)
    • Able to present to customer
    • Maintain positive customer and supplier relationships
    • At least 4 years of professional experience

    Desired Skills:
    • CAD software, especially Creo and Windchill
    • Hands on experience in Electro-optical sensors
    • Microsoft Project
    • Prior experience in DoD or Aerospace
    Required Education:
    • A Bachelor's degree in Mechanical Engineering or related Engineering field
    • Prefer to also have a Master's Degree
    • Minimum 4 to 6 years related experience
     
    Job Number: 37220
    Job Location: El Segundo, CA
    Duration: 6 months
    Start Date: ASAP
    Input Date: 02/23/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    The Principal Mechanical Engineer is responsible for understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to management as well as customers.
    The position requires the mechanical design leader to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors.
    The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization.
    This position also requires an engineer familiar with design for manufacturing and producibility.
    Skills:
    • CAD software, especially Creo.
    • Geometric Tolerancing (GD&T)
    • Able to present to customer
    • Maintain positive customer and supplier relationships
    • At least 8 years of professional experience

    Desired Skills:
    • CAD software, especially Creo
    • Microsoft Project
    • Prior experience in DoD or Aerospace

    Required Education:
    • A Bachelor's degree (BA, BS) or equivalent, in Mechanical Engineering
    • Minimum 8-10 years related experience
     
    Job Number: 37219
    Job Location: El Segundo, CA
    Duration: 6 months
    Start Date: ASAP
    Input Date: 02/16/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Mechanical Engineer - Tech Spec II

    Savannah, GA
    Rate: $60-$63
    Long Term contract

    Unique Skills:

    Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Gulfstream Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 7058
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 10/03/2017
    Last Updated: 10/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management
    systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

    Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc

    Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems
    -Experience creating presentation material using MS Power Point and delivering presentations.
     
    Job Number: 0398
    Job Location: Palmdale, CA
    Rate: $55 per hour
    Per Diem: NO
    Overtime: Yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 02/03/2017
    Firm Name: YOH SERVICES
    Attention: Jess McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Job Description:
    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management
    systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.


    Mandatory Skills:
    -Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc


    Desired Skills:
    Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems
    -Experience creating presentation material using MS Power Point and delivering presentations.
     
    Job Location: CA
    Rate: $45-$55
    Input Date: 02/03/2017
    Firm Name: JOHNSON SERVICE GROUP
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Mechanical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Must be proficient in V4 and V5 Catia with Smarteam experience.
    - Must have experience with design and installation of Electrical Equipment Installations or Aircraft Mechanical Systems design.
    - Previous Aircraft STC modification experience is desired.
    - Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6993
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 01/24/2017
    Last Updated: 02/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Level 3

    Description:
    Mechanical Engineer - Level 3

    Location: Orlando, FL
    Rate: $60.00/HR
    1 year contract

    **Must have a current ACTIVE secret clearance**

    Description
    - Researches, plans, designs and develops mechanical products and systems such as instruments, controls, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
    - Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
    - Utilizes Pro-E / CREO for gimbal and optical-mechanical mechanism detailed design.
    - Bearing, encoder, motor selection and supplier oversight required.
    - Assist with production issues resolution and root cause analysis.


    Skill/Experience/Education
    Mandatory:
    Mechanical engineer with 6+ years optical/gimbal mechanism design experience.
     
    Job Number: 6998
    Job Location: Orlando, FL
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 02/06/2017
    Last Updated: 06/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Thermodynamics analyst for Advanced Development Program with active secret CA

    Description:
    Lockheed Martin Aero 0393
    Recruiter to Contact:
    Job Title: Mechanical Engineer
    Job Number: 158232
    Location: Palmdale, CA
    Compensation: 45-55/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:Circle A, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt


    Description:

    Description
    Thermodynamics analyst for Advanced Development Program in Palmdale California. Will plan, manage, and conduct thermodynamic analysis of air vehicles in support of subsystems design. Will perform heat transfer analysis using Sinda/Fluint and Thermal Desktop and analyze thermal management
    systems. Will coordinate requirements and design solutions with structures, subsystems and propulsion engineers. Will perform ECS analysis.

    Skill/Experience/Education
    Mandatory:

    -Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc.

    -Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS).

    -Leadership experience.

    -Experience creating presentation material using MS Power Point and delivering presentations.

    Desired:

    -Leadership experience.

    -Experience creating presentation material using MS Power Point and delivering presentations.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)

    Heat Transfer/Thermal Analysis Experience performing heat transfer analysis using finite difference analysis tools such as Thermal Desktop, Sinda Fluint, Sinda G, MSC Sinda, Nastran Thermal Analyzer, etc. 11 Years + Yes
    ECS Analysis Experience developing and analyzing Air Cycle System (ACS) and/or Vapor Cycle Systems (VCS) Environmental Control Systems (ECS). 11 Years + Yes
    Leadership Experience leading teams. 0-3 Years No
    Presentations Experience preparing and delivering Power Point presentations. 4-5 Years No
     
    Job Number: DW-0393
    Job Location: Palmdale, CA
    Duration: 10 month contract
    Input Date: 03/07/2017
    Last Updated: 05/05/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer-PRO/E

    Description:
    12 Month + contract
    $50/HR
    Mechanical Engineer-PRO/E

    Responsible for the design, modeling, development and testing of a machine, structure or system. Develops functional requirements. Understands and applies standard engineering principles. Creates simulations and prototypes to evaluate preliminary designs and test how a machine, structure or system operates. Designs and tests components, and integrates components to produce final product. Monitors quality of products and controls the efficiency of processes. Evaluates a design's overall effectiveness, cost, reliability, and safety. Investigates root causes of failures to maintain quality and recommend improvements.

    Must have 3-D CAD experience, Pro-E highly experience preferred. Experience in a regulated industry highly preferred.
     
    Job Location: Portage, MI
    Rate: 50/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 02/16/2017
    Firm Name: AMERICAN CONTRACT GROUP
    Attention: Derek Doucette
    Address: 50 HIGH ST STE 46
    City, State: NORTH ANDOVER, MA 01845
    Phone: 978/984-5581
    800 Phone: 877/723-9087
    Fax Phone: 978/208-8246
    Website: www.americancontractgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer/Checker

    Description:
    Mechanical Engineer/Checker

    Location: Savannah, GA
    Pay Rate: $50-$55
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations are preferred.
     
    Job Number: 6896
    Job Location: Savannah, GA
    Rate: 50.00-55.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    With sustaining experience
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers BSME -- Pro/E

    Description:
    2000 hours Pro/E
     
    Job Location: CT/IN/FL/OR
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer

    Description:
    Unique Skills:
    Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

    Principal Duties and Responsibilities:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-143
    Job Location: Savanah, GA
    Rate: $59 - $62
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 02/22/2018
    Last Updated: 06/22/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Mechanical or Manufacturing Engineers

    Description:
    Project management or overhaul experience
     
    Job Location: West
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mid-level Mechanical Design Engineer

    Description:
    Mechanical Design Engineer
    9 month contract
    Palm Bay, FL


    The ideal candidate will have 5 years of experience with space flight hardware design including design of precision mechanisms, composite structures, metallic and non-metallic components, manufacturing methods, GD&T, design processes, and task management. Familiarity with CREO, top down design techniques and large assembly management required.

    Degree Requirements: BS/BA/MS Mechanical Engineering, Materials Science & Engineering, Aerospace Engineering or equivalent.


    Send resumes and salary expectations to lleszek@butler.com
     
    Job Number: 51269
    Job Location: Palm Bay, FL
    Rate: 45.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 9 months
    Start Date: 2/16/17
    Input Date: 03/10/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Network Security Engineer

    Description:
    Network Security Engineer
    (Authentication Mechanisms, OS Hardening experience)
    Network Security Engineer - Linux Kernel, Network Security, Black Box Penetration Testing

    Responsibilities:
    Software Design and Verification Engineer with excellent Linux Kernel, SELinux and Operating-System Level knowledge sought for a challenging permanent position with a Avionics Network Security scope
    Formal design and verification of cutting-edge security systems for certification by civil aviation agencies for use in the world's most prominent Airlines.
    Actively participate in technical discussions and propose product design decisions
    Monitor and track personal progress to ensure timely completions of project milestones and deliveries
    Act as subject matter expert on assigned product and your technical implementation
    Support product development managers at internal technical exchange in customer meetings/contacts
    Black box penetrate product offerings with edge of industry tool sets and knowledge

    Required Experience/Skills:
    Development and verification of next-generation network security and threat management systems
    Develop abstract models and formal verification specifications for avionics servers
    Create definitions of threat vectors and protections for product resources
    Contribution to the areas of product performance (with full security), reliability, scalability, and maintainability of the product
    Participation in our ongoing product enhancements and software development practices

    Required Experience & Skills:
    Bachelor’s Degree in Computer Science or an equivalent technical discipline
    Minimum 5 years professional experience in the software engineering field
    Knowledge of current penetration test suites and modern collaborative attack methods
    Knowledge of IP based network penetration methods, network and security protocols (TCP/IP, IPSEC, TLS, PKI, HTTP/HTTPS) and understanding of firewall architecture and implementation
    Understanding of Agile software development framework and demonstrated experience in applying Agile methodologies to meet project specific needs
    Understanding of design and development process with emphasis on continuous integration in a test driven environment
    Experience with development and project planning/tracking tools such as Jira, Confluence, TFS, SVN
    Good oral and written communications skills and ability to effectively present ideas and concepts to both technical and non-technical audiences
    Experience with computer security concepts, information assurance, mandatory access control, role based access control, authentication/authorization, certification and accreditation

    Preferred Additional Experience/Skills:
    Demonstrated experience in IP penetration knowledge
    Background in high assurance guard or cross domain application development
    Certificate management and / or spoofing knowledge
    About Enea

    Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecommunications and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
     
    Job Number: WW021617ASTR
    Job Location: Milwaukee, WI
    Rate: DOE
    Per Diem: YES
    Overtime: YES
    Duration: 9-12 MONTHS
    Start Date: 03.01.17
    Input Date: 02/16/2017
    Last Updated: 03/08/2017
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Walter Walonoski
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Performance Engineer

    Description:
    Performance Engineer:

    Reporting to the Lead Engineer, you will be responsible for performing static/dynamic loads, retraction and vibration analysis for landing gear in response to regulatory / customer requirements and performance methodologies. You will also conduct sensitivity studies, perform trade studies, generate design study summary reports, prepare and present results to the customer at program reviews.

    Primary Responsibilities:
    • Provide technical guidance for all performance related tasks of the project assigned while working with the following:
    o Lead Engineer to ensure that performance tasks are properly managed to achieve project goals
    o Integrated Product Team (IPT) to ensure Engineering integration into overall program requirements
    o Divisional Engineering teams to ensure that engineering integrity is achieved, engineering procedures are complied, lessons learned are addressed and a robust trouble-free product is developed
    • Executes performance activities including:
    o Customer / Suppliers:
    o Liaise with customer/Suppliers for all performance related tasks
    o Foster strong customer relationships through accountability, transparency and credibility
    • Integration / Planning:
    o Responsible and accountable for all performance tasks and its completion dates
    o Communicates progress and roadblocks to the Lead Engineer
    o Requires a good understanding of landing gear shock strut and actuation principles and operation.
    • Responsible for performing
    o Static/dynamic loads and vibration analysis for landing gear, actuation and subsystem structural design criteria;
    o Perform derivation of design loads and analysis of dynamic performance to ensure that customer and certification requirements are satisfied;
    o Develop the structural dynamics models and compute dynamic loads;
    o Perform systems hydraulic simulations
    o Develop operational and certification performance reports
    o Compute landing gear dynamic loads and landing impact for optimizing landing gear absorption characteristics
    o Perform dynamic analysis for optimizing retraction timing
    o Identify critical loading conditions and documentation of results in formal Engineering Reports
    o Be responsible for the providing detail sizing definition to designers and stress analysts.
    • Compliance
    o Ensures compliance to Engineering methodologies
    o Maintains compliance to ITAR and regulatory requirements
    o Occasional travel between customer/suppliers locations
    o Perform other duties as required


    Basic Qualifications

    Bachelor's degree in Mechanical or Aerospace Engineering
    • A minimum of 8 years of experience in analysis tools and techniques
    o 5 years of experience within the Aerospace industry; must include extensive experience in development of transport and / or military type aircraft
    • Demonstrated experience using ADAMS, Matlab / Simulink
    • Demonstrated ability to work with PDM (Smarteam, MatrixOne, Team Center) system
    • Demonstrated ability to utilize Catia V5
    • Strong interpersonal & communication skills with demonstrated ability to develop and maintain good working relationships with internal and external customers
    • Demonstrated ability to work directly with customers and suppliers
    • Understanding of performance based specification requirements, requirements management and verification.
    • In-depth knowledge of MS programs (Word, Excel, Project, Power Point)
    • Successful candidates must meet all requirements under ITAR & CCGP
    • Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
    • US citizen, permanent resident alien or able to review all export-controlled technical information.


    Preferred Qualifications: Demonstrated skills in decomposing system level requirements and developing subsystem specifications. Demonstrated skills in developing performance based systems specifications. Open minded, pro-active, independent, quick learner and team player with a strong desire to learn.
     
    Job Number: 83720
    Job Location: Independence, OH
    Rate: 40 Per Hour
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/17/2017
    Firm Name: YOH SERVICES
    Attention: Jess McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Engineer

    Description:
    We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


    Varying Responsibilities:
    � Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
    � Evaluate certification methods of compliance.
    � Coordinate test and certification requirements.
    � Author flight test and ground test plans including test hazard analysis.
    � Participate in ground and flight tests as required.
    � Analyze test data and evaluate compliance with regulations.
    � Prepare certification test reports.
    � Occasional international travel may be required.
    � Author flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.
    � Domestic and occasional international travel is required.
    Desired Qualifications:
    � APU experience, Fire Detection/Extinguishing, fuel feed and transfer, fuel logic system
    � Engine, particularly geared turbofan engine), FADEC and engine controls, cowl anti-ice, bleed air and fuel interfaces, oil system
    � Relevant work experience related to aircraft design, test, and certification.
    � Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
    � Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
    � Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
    � Consulting and direct hire opportunities available.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 02/19/2017
    Last Updated: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Mechanical Design Engineer

    Description:
    About Enea

    Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecommunications and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.

    MSSD Turbine Engine Structures is responsible for ensuring the mechanical integrity of the structural parts used on gas turbine engines. These responsibilities include the design, development, testing, and field support of static structure components which must meet requirements for life, cost, weight, maintainability, and durability. The engineer must address stress, strength, vibration, heat transfer, deflection, fatigue life, containment, material selection, etc. in evaluating parts. Typical static structural parts include cases, frames, plenums, stators, vanes, shrouds, diffusers, deswirls, gearboxes, bearing supports, and ducts.

    MSSD has an opening in Structural Analysis for an experienced engineer to perform design and analysis of static structural parts. The scope of this position includes developing and documenting processes for certifying the fan blade out event by analysis. This will include analyzing structure that has already been tested to confirm margins of safety utilizing state-of-the-art software tools and methods. It will also include developing criteria and guidelines that will meet the needs of the certifying authorities (FAA, EASA). The candidate will be expected to recommend the appropriate direction and advancements that Honeywell should pursue. Analytical results will be presented in design reviews and with appropriate documentation to meet program deliverables and requirements. Applicant must work effectively with design teams, global support and chief engineers.

    Basic Qualifications:
    • Due to ITAR requirements, must be a US Citizen or Lawful Permanent Resident
    • Minimum BSME degree
    • Minimum 7 years experience in an engineering field

    Additional Qualifications:
    • Previous experience with or knowledge of a turbine engine fan blade out event analysis or testing is preferred.
    • Knowledge of the gas turbine engine industry
    • 3D modeling (CAD) and FEA (ANSYS, etc.) of gas turbine engine static structures and systems
    • Capable of performing complex analyses and hand calculations of engine components and systems
    • Proven understanding and application of solid mechanics, dynamics, fatigue, and finite element analysis
    • Excellent communication skills (written and oral) are required to interact with engineering teams, other disciplines, and the customer
    • Knowledge of Six Sigma tools and application
     
    Job Number: WW010117HWME
    Job Location: Gilbert, AZ
    Per Diem: YES
    Overtime: YES
    Duration: 1 YEAR
    Start Date: ASAP
    Input Date: 02/01/2017
    Last Updated: 02/24/2017
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Walter Walonoski
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Mechanical Engineer with active secret / CREO CA

    Description:
    Job Title: Principal Mechanical Engineer
    Job Number: 158531/6650702
    Location: El Segundo, CA
    4 openings
    Ability to obtain clearance required or active secret preferred
    Assignment Length: 6 month contract


    The Principal Mechanical Engineer is responsible for understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical design leader to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility. Start Time: 12:00 AM
    Hours: 8:00am to 5:00pm Location: CA320 2000 East El Segundo Boulevard Building E01 El Segundo CA United States
    Education:
    Additional Job Details: Skills: • CAD software, especially Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 8 years of professional experience Desired Skills: • CAD software, especially Creo • Microsoft Project • Prior experience in DoD or Aerospace • Already possess a security clearance Required Education: • A Bachelor's degree (BA, BS) or equivalent, in Mechanical Engineering • Minimum 8-10 years related experience
    Organization Distribution:
    Owning Organization: HKA Enterprises, Inc. dba MIDCOM Organization Distribution:
    Customer Defined Fields:
    Source Method Recruited
    Contractor Work Week
    Degree Required?
    Exempt vs Non-Exempt As a reminder: Exempt vs Non-Exempt status is determined by the supplier based on FLSA guidelines, unless State Law prevails. Definition: Exempt contractors are paid the straight time bill rate for all hours worked and Non-exempt contractors are paid the straight time bill rate up to 40 hours per week and overtime bill rate for all hours worked over 40 during the work week.
    Service Contract Act The Service Contract Act is a Federal Government regulation that applies to specific programs/contacts that Raytheon has with the government. When this act applies, minimum pay rates are required for specific jobs performed by contractors brought in to work on the program. If you're uncertain as to whether this act applies to the program you are bringing in a contractor to work on, you should contact your program office.
    Does this position fall under the Service Contract Act of 1965 (SCA)? No
    If you answered yes, please provide occupational Code/Title
    U.S. Citizen Required? Yes
    If yes, International travel?
    Security Clearance Required Secret
     
    Job Number: MB-6650702
    Job Location: El Segundo, CA
    Rate: 80/hr DOE
    Input Date: 02/20/2017
    Last Updated: 02/27/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Engineer

    Description:
    Title: Product Engineer
    Location: Buffalo Area, Buffalo, NY 14052
    Duration: 12+ Months

    Job Summary:
    Reporting to the Manufacturing Manager, the Sr. Product Engineer is an advanced engineering position involving a significant level of responsibility with latitude for unreview actions and decisions. The incumbent is assigned the more technically advanced products, usually starting three to four months before scheduled transfer from development to production.

    Primary responsibilities of the Product Engineer are: effect a smooth product transfer from development into production, develop the design into a mature producible product, support production assembly/test start-up and maintain integrity of the product design. After transfer from Development Engineering, the Sr. Product Engineer has full design responsibility for the product.

    Accountabilities
    1. Monitors assembly/test of assigned products, identifies areas for improvements in producibility and quality and initiates the necessary changes to incorporate these improvements. Scope of improvement changes include assembly/test instructions, Assembly/test equipment, fixturing and design.
    2. Reviews and approves design change proposals (permanent and deviation – temporary) with “after” review by the Manufacturing Manager. Sources of change proposals include: Manufacturing Engineering – producibility of machined parts; Material Review Board – “use as is”, scrap, rework decisions; Material and Process department – material/process spec changes; Vendor – quality/producibility improvements and Customer – product specification changes.
    3. Develops and initiates design changes to resolve assembly/test problems, improve piece part producibility, and salvage deviate hardware as part of Material Review Board actions.
    4. Provides technical direction and direct support for analysis of failed units returned by the customer and in-house rejections. The incumbent reviews and approves (sometimes also initiates) the Failure Analysis Report and in some instances, with clients Quality Assurance Engineer, formally presents the report to the customer.
    5. With the Development Engineer, establishes corrective action for qualification test failures.

    Results of the incumbents activities have a significant impact on production. It therefore, is the incumbents responsibility to inform the appropriate management and support functions of any event which impacts product schedule, product quality or status of shipped hardware. Typically, this includes: Production Control – loss or delay of piece parts due to redesign or Material Review Board action; Sales – potential problems with shipped hardware or schedule slip, Management – problems effecting costs, schedule slip, quality.

    In summary, during the transfer phase of a program, into production, the incumbent is responsible for establishing a smooth transition from development into production assembly and test. Also, the incumbent must become thoroughly familiar with all design and operating features of the product so as to capably assume design responsibility.
    • BS Degree in Electrical of Mechanical Engineering
    • 5-7 years of experience with comparable technology
    • Experience managing a budget
    • Experience interacting with customers
    • Experience with technical presentations
     
    Job Number: 51270
    Job Location: Buffalo, NY
    Rate: DOE
    Per Diem: Yes
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 02/13/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Mallik
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com