Job Search Results

726 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 03:58AM Pacific Time by ContractJobHunter. )

Listings 1 - 726

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2566 - STRUCTURAL DESIGNER - cv, word doc only

Description:
Closely interface with technology, stress, systems, manufacturing, test groups and structural suppliers;

Produce change documentation;

Support directly other engineering and operations departments;

Support design and program reviews with partner/suppliers;

Produce status for project and assurance that engineering deliverables, meeting quality requirements, are provided as per schedule.

Have Bachelor Degree in Engineering mechanical/aerospace engineering plus a minimum of 10 years relevant experience in aerospace or related industry,

Possess a strong knowledge of aircraft structures and systems installation, configuration management principles, design for manufacturing, detail design (sheet metal, machined parts, piping, and component assembly), weight control, drafting procedures and standards, costs and schedule.

Have knowledge of CATIA/ENOVIA V5 and MS Office is required.

Are an energetic person with excellent communication and interpersonal skills that will allow the candidate to meet desired results in a high-pressure working environment.

Have a high sense of commitment, willingness to accept responsibilities and act independently and the ability to collaborate with partners and suppliers are assets.

Are fluent in French and English (written and spoken), an asset
 
Job Number: 2566
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Manufacturing Engineer II Needed

Description:
Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibillity studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.




The Structures Company is an AA/EOE.
 
Job Number: 311
Job Location: GA
Rate: $52.50/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C130 Flight Line Experience required powerplant licence - no clearance SC

Description:
APG Mechanic
Work Location: Greenville, SC
Status: Open

Qty: 2
Desired Start Date: 7/8/2019
End Date: 12/20/2019

Job Description:
Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company FAA Airframe and/or Powerplant License a Plus!

Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
Mission essential functions and other duties may be assigned as required.

Experience
Areas of Expertise C-130 No 1 2 - 4 Years
Soft Skills Troubleshooting No 1 2 - 4 Years
Technical Skills Diagnostic and Repair No 1 2 - 4 Years
 
Job Number: JE-1656-1
Job Location: Greenville, SC
Rate: 25-29/hr
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer
Location: Lexington, KY
12+ month contract

ACTIVE SECRET CLEARANCE REQUIRED.

1-5 years of experience - entry level candidates will be considered

Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.


Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various
platforms based on customer specifications.

As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer
requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications :
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.
2 years of experience 

Desired skills :
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint).
Demonstrated previous success working in a team based environment to meet objectives.
MRB experience with Hangar support







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56743
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 04/29/2019
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program.
- This program is critical to the success of US service men and women deployed throughout the world.
- Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.
- The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.
- Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn.
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
- MATHCAD and MATLAB are also used for 'hand' calculations.
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Education :
- Level 2: BS+3-5 YRS or MS+0-3 YRS

Desired skills :
- Experience with a FEM creation using ANSYS, NASTRAN or similar program.
- Experience with Microsoft office suite (Word, Excel and PowerPoint).
- Demonstrated previous success working in a team based environment to meet objectives.
- MRB experience with Hangar support
 
Job Number: 10810
Job Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / ANSYS FEMAP Finite Element Modeling (FEM) MATHCAD MATLAB - Clearance KY

Description:
1499-1 Aeronautical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 2
Desired Start Date: 4/15/2019
End Date: 4/15/2020

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).

MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications:
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.

Desired skills:
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint). Demonstrated previous success working in a team based environment to meet objectives. MRB experience with Hangar support

Typical Minimums:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $23.00 - $65.00 Hourly
 
Job Number: JE-1499-1S
Job Location: Lexington, KY
Rate: 65/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1468-1 Aeronautical Engineer

Work Location: Palmdale, CA
Status: Open
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will have a complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.

3-D CATIA experience is required.
Mechanisms Engineering experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1468-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1470-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.
Landing Gear Engineering experience is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1470-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1464-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will have a complete understanding of the mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction systems, flight control systems, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1464-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1467-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will apply extensive technical expertise with mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction, flight control, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at site and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1467-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / 6 years’ experience with aircraft design, assembly, production or repair is required URGENT SC

Description:
164971

1650-1 Aeronautical Engineer
Work Location: Greenville, SC
Status: Open

Qty: 1
Desired Start Date: 6/17/2019
End Date: 12/20/2019

Job Description:
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Engineering candidate will be required to coordinate across many Greenville Operations Functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action. Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.

Candidate must value and support diversity.

Hourly Pay Rate locked in at $48
1st Shift- 6:30-4:00 (Possible OT)

Areas of Expertise F-16 No 1 6+ Years
Technical Skills Engineering Design Principles No 1 6+ Years
 
Job Number: JE-1650-1
Job Location: Greenville, SC
Rate: 48/hr max
Duration: 6 months CTH
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Stress Analyst Secret Cleared

Description:
*This is a 1 year or more contract position located in Lexington, KY*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicles and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*2 years’ experience in stress/structural analysis of aircraft using ANSYS/FEMAP for FEM

*Nastran experience
*Knowledge of hand analysis using MATHCAD/MATLAB

*MRB experience with Hangar support
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Lexington, KY
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts/ Service Clerks

Description:
STS Technical Services is hiring Parts / Service Clerks in Las Vegas, Nevada.

Essential Duties & Responsibilities:
Perform data entry into Invoicing software and maintenance software as required, coordinate parts orders and assist in inventory control.
Follow up with customers on aging invoices.
Maintain accurate and complete filing systems for vendors and customers
Assist in daily invoicing of all completed work orders and parts sales
Accurately receive parts into Inventory software system
Coordinate parts orders
Maintain accurate inventory levels
Responsible for establishing and maintaining a file system
Assist in performing accurate and on time EOM close reports
Continue to receive ongoing training to gain knowledge of the industry
Provide managers updates on new business
Perform Data entry into customers maintenance programs as required
Process vendor invoices to corporate office
Make regular sales calls to increase parts sales
Coordinate daily service and parts transactions
Responsible to accurately invoice repair orders
Responsible to accurately receive parts into inventory
Coordinate requests from customers on Service and parts transactions
Communicate safety concerns with in the operation to management
Communicate customer requests for service to management
Maintain a clean and organized work environment
Qualifications:
High School Diploma
Valid Driver’s License
Good oral and written communication skills
PC literate, Strong word processing skills
Ability to prioritize and organize
Prior work experience in a mechanical work environment
Minimum 1-year experience in a service oriented office environment
Ability to attain Airport issued ID badge Notes from the hiring manager
Relevant experience with automotive parts and/or material handling.
The person we are looking for will need to have a strong back ground in those areas as well as computer skills – basic excel skills are required.
Company Overview & Benefits:
STS Technical Services offers hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-800-359-4787.
 
Job Number: 47780
Job Location: Las Vegas, NV
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Utility Technicians

Description:
STS Technical Services is Hiring Utility Technicians in Hunt Valley, Maryland.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
This position in provides support to our Manufacturing floor. The individual will mostly provide preparation support for Paint, but may also provide support in the Mechanical, Electrical or Air Vehicle Factory performing basic tasks, such as hand work, deburring, stenciling, Machine operation, cleaning, organizing, wiring and assembly.

Job Duties:
In support of our Paint Shop, the Utility Person will perform all surface preparation including body filling, glazing, sanding, cleaning, and masking surfaces
They will set up, adjust and operate automatic paint spraying equipment and drying ovens maintaining thickness or coating in conformance with specifications
The Utility Person may provide support to other areas of the shop floor
The support includes, assembling details and sub-assemblies, assisting experienced mechanics with operating equipment, material sizing and ply design layout of composite parts and bond assemblies, and set up and fabricate electronics assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools
The incumbent may also move material by hand, truck or conveyor within assigned storage area
Qualifications:
High School diploma and no related experience required
Paint or Body Shop experience is a plus
Ability to work with minimal supervision
Ability to work from verbal and written instructions
Ability to operate material handling equipment
Ability to work well independently and in a team environment
Strong attention to detail
Safety minded and able to work to requirements of a Quality management system
Basic PC skills/ knowledge
Ability to read and interpret blueprints and understand a parts list and multi-level assemblies is a plus
Working knowledge of abrasives, paint & finishing specifications is a plus
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 47902
Job Location: Hunt Valley, MD
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DLO Engineer - Simulator Systems Programmer

Description:
Our client is looking for an accountable DLO Engineer with 3 years of experience.

The ideal candidate for this position will perform the following tasks:
* Performs activities as required to accomplish objectives as established in the areas such as researching new systems in development, system modeling and integration.
* Recommends establishment of group objectives to improve operational efficiency and ensure Textron Aviation’s competitive edge.
* Design and development of software models to simulate various mechanical and electronic systems from the entire aircraft.
* Design and development of software and hardware solutions to integrate aircraft hardware – both mechanical and electronic – into the simulator environment.
* Responsible for requirements management, systems specifications, and interface management with both other engineering groups and with outside suppliers to maintain simulator configurations.
* Coordinate with other engineering groups and with outside suppliers to schedule and support simulator test activities.
* Develop and maintain effective two-way communications both internally and with other departments to assure adequate dissemination of information concerning plans and developments.
* Assures supervision awareness of program status, problems and successes.
* Provides periodic reviews and update presentations to management

Qualifications and Experience:
* Bachelor’s Degree required in Mechanical Engineering, Aerospace Engineering, Electrical Engineering or other relative technical field
* Minimum of 3 years of engineering experience or relative aviation technical or systems experience.
* Experience with C programming language
* Experience with Linux operating system
* Ability to read aircraft drawings for mechanical, avionics, and electrical systems
* Experience with Python programming language is desired
* Familiarity using Matlab/Simulink with basic control systems is desired.

The ideal candidate will possess the following skills and characteristics:
* Professional and diplomatic demeanor
* Strong sense of accountability and integrity
* Excellent verbal and written communication skills
* Time management skills to support multiple concurrent projects
* Proficient in use of standard Microsoft Office programs

Benefits: Visit http://www.teamglobal.com/benefits for more details.
 
Job Number: 130617
Job Location: Wichita, KS
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Gary Kidd
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer (primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: AP226771
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Active/Final Secret clearance with most recent investigation completed within the last 5-years. Preferred

Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
Proficient in the use of Geometric Dimensioning and Tolerancing.
Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
Significant CATIA-V4 experience.
Experience in structural analysis and proficient in material selection/sizing.
Experience in electro-mechanical/pneumatic/hydraulic systems design.
Experience working in a fast paced, developmental environment.
Experience writing technical reports and presenting technical data.
 
Job Number: 46847
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter / NX MCAD NY

Description:
165064
Request number: 6074
Job title: Designer/Drafter
Number of openings: 2
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 39
Start Date: 02/04/2019
Tentative End Date: 07/31/2019


Function:
Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.

Ideally experience and in-depth knowledge in utilization of Siemens NX Mcad design software is desirable (required). Additionally experience using 3D Mcad software package ie: Solidworks or PTC Creo is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.
Also it is desirable if the candidate has experience in customizing their Mcad environment taking advantage of the Mcad functionality promoting cad efficiency.

Education:
AAS with applicable experience is also acceptable


Request status: Open
 
Job Number: MB-6074
Job Location: East Aurora, NY
Rate: 39/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter/Designer (Airframe & Interior Design)

Description:
The ideal candidate will support, perform and manage Drafting and Design of Assembly Drawings based on layouts, sketches and blueprints. This may include utilization of computer aided design applications.

Candidate must have knowledge of:
• CATIA V5
• LCA
• Interior Design or Airframes

Desired:
• MatrixOne
 
Job Number: 2010111538
Job Location: Coateville, PA
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Ice Protection Design Engineers

Description:
Required:
Engineering Degree Required
o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design
o Preferred: CATIA V6 and Enovia experience

Email resume to: mmccarthy@pdstech.com
 
Job Number: ECS=Tex-KS
Job Location: Wichita, KS
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer:

AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Location: GA
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsible for evaluating test requirements for RF communication units such as radios, RES boards, baseband boards, power supplies and power amplifiers and specify test equipment, develop associated electrical interfaces such as circuit boards and cabling to implement a hardware test solution.
Work with test software group to coordinate test hardware to meet test requirements.
Work with mechanical designers to implement test fixtures as part of the hardware test solution.
Develop test solution concepts and prototypes of initial concepts.
Document test hardware and software using computer-based tools such as DxDesigner and Visio
Implement standard Configuration Management techniques in design architecture
Direct technicians in the completion of test system fabrication and troubleshoot
Typical day is Engineering Design Reviews
Education/Experience
Bachelors
MUST HAVE Experience in designing cable circuit board, Electronic Test equipment especially RF along with multimeter oscilloscopes switch matrix
 
Job Number: 49680
Job Location: Rochester, NY
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5and CHS preferred 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 19-144937
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11062
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11061
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 3

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-364
Job Location: Savannah, GA
Rate: $55 - $58/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Designer (CREO Cabling)

Description:
The candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. May include utilization of computer aided design applications.

QUALIFICATIONS/EXPERIENCE
Preferred Experience Requirements:
• 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in electromechanical designs.
• Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
• Ability to apply GD&T to parts and assemblies per design requirements.
• Ability to perform tolerance analysis calculations.

Regular Experience Requirements:
• Strong communications skills.
• Ability to work effectively within a team environment.
• High energy and passion for innovation and creativity.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
 
Job Number: 1910101762
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: ESDE_Hazelwood
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

Description:
164950/1764
Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 17, 2019

Target End Date: Dec 20, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 12-20-19

3 Openings

Client is seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



Qualifications


Basic Qualifications:

Bachelor of Science degree in STEM discipline.

9 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
 
Job Number: JK-1764
Job Location: Melbourne, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical 4 / NX - Clearance FL

Description:
164948/1765
Engineer Mechanical 4 (Job Number: 19012383)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jul 15, 2019

Target End Date: Jul 10, 2020

Pay Rate: $60 to $66/hr (Based on experience)

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Under Supervisory direction, design and develop wiring harness/cable assembly installations into air vehicles for multiple aerospace programs using SAE AS 50881 and proven commercial practices as a guide.


This position will require inter-departmental coordination with other vehicle sub-system departments including aircraft structure, equipment installation, hydraulics, Environmental Control Systems, and manufacturing teams.


Basic Qualifications: Bachelor Degree plus 9 years of experience or High School Diploma plus 17 years of experience in lieu of a Bachelor Degree. Experience with NX 3D tool and 2D drawing creation based on 3D models


Preferred Qualifications: Experience with wiring routing in a 3D tool
 
Job Number: JK-1765S
Job Location: Melbourne, FL
Rate: 60-66/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
The position seeks a professional in the facilities and services engineering for Windsor Locks, CT facilities. The candidate will provide professional facility engineering and project management experience to designated projects and assignments.

The candidate will be responsible for the design, development, verification and documentation of the mechanical infrastructure and equipment used in fabricating, assembling, testing and inspecting products.

Additional Job Details:
The candidate must work well with all functional groups and good communications skills at all levels are required.
Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.
Projects range from small single tasks to larger scale construction projects including facility upgrades, facility renovations, special projects, and managing equipment installation.
The candidate will assist in the selection and contracting process of consultants and construction teams as necessary for each project Provide hands-on involvement with equipment and processes by being available to the operators, maintenance personnel, and other Facility Engineers and gaining intimate knowledge of processes
Manage capital projects on time and within budget
 
Job Number: 49657
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Job Description:
- Facilities Engineering & Planning, at our clients Los Angeles Site, is looking to hire a Facilities Project Engineer with experience in managing projects for Manufacturing & Process equipment installations and Facility modifications.
- The responsibilities of this position include internal customer interface, external contractor interface, and leading Project Teams on a variety of Facilities Projects (such as purchase and installation of machinery & equipment, facilities upgrades & renovations, moves & rearrangements of office, lab and manufacturing functions, and other support).

Primarily, these responsibilities include:
- Developing and maintaining project scope, schedule, cost, AutoCAD layouts, and project specifications (20%);
- Generating and reviewing/approving work authorizations and invoices for payment (10%);
- Coordinating with Safety, Health & Environment (SH&E), Maintenance, Supply Management, Finance, and others for the successful planning, implementation, and completion of assigned projects (40%);
- Oversight of service and construction contractors (30%)

Skills:
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.

Education:
- BA/BS degree in Industrial, Mechanical, Electrical, Civil, Structural Engineering or Architecture and 9+ years related experience.
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.
 
Job Number: 10764
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer (Power Plant or Energy/Waste or Related Industries)

Description:
Facilities Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Engineer

Description:
Facilities Project Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The candidate will provide professional facility engineering and project management experience to designated projects and assignments.

The candidate will be responsible for the design, development, verification and documentation of the mechanical infrastructure and equipment used in fabricating, assembling, testing and inspecting products.

Bachelors degree required

Additional:
The candidate must work well with all functional groups and good communications skills at all levels are required. Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel. Projects range from small single tasks to larger scale construction projects including facility upgrades, facility renovations, special projects, and managing equipment installation. The candidate will assist in the selection and contracting process of consultants and construction teams as necessary for each project Provide hands-on involvement with equipment and processes by being available to the operators, maintenance personnel, and other Facility Engineers and gaining intimate knowledge of processes Manage capital projects on time and within budget
 
Job Number: 11082
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Design Engineers

Description:
• Required: o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings o 14 CFR Part 23/25 aircraft flight Controls design experience, 5 years minimum o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.) o Aircraft mechanical system design o Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing o Preferred: CATIA V6 and Enovia experience

Email resume to: mmccarthy@pdstech.com
 
Job Number: Tex-Flight Control
Job Location: Wichita, KS
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post-flight data.
Make assessments to ensure the safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years of relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning, and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10637
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Extensive Catia V5 and SmarTeam experience required.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-332
Job Location: Savannah, GA
Rate: $70 to $ $80
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Project Engineer

Description:
This is an exciting time to join the Engineering Hardware Management Team (EHMT). Be part of an engineering team that is shape the future of Mechanical products working on multiple new development programs. Candidate will work closely with engineering leadership on managing the development hardware process and work with multiple cross-functional teams. Candidate will help coordinate SAP demand entry, act as a liaison between engineering groups, new product sourcing, suppliers and manufacturing, and provide data reporting for both internal and external customers. Candidate will help improve Project Engineering schedule fidelity and milestone compliance for development hardware.



Key Responsibilities:

" Generate and manage hardware orders within SAP and coordinate the reporting requirements with the Project Engineering Program leads.

" Coordinate material expedites, prioritization, allocation and critical response to customer requirements and Engineering needs.

" Reconciles budget forecast for hardware spend with actual hardware plan provided by development engineering group. Reconciles actual program hardware expense with deliveries.

" Manages portfolio of orders on a program such that the orders are properly received and transacted in SAP.

" Provide all required material availability and status reports for material delivery for both internal and external procured material.

" Support program objectives through participation in line-of-balance (LOB) and material change process reporting

" Validate Engineering Project demand to ensure SAP cost commitments are in line with program budgets

" Work with the ISC to ensure all NPD demand is maintained in project stock and all plant stock orders are moved plant inventory in a timely manner.

" Document and publish lessons learned



Basic Qualifications:

" Bachelor's degree in Mechanical Engineering, Aeronautical Engineering or Business-related discipline.

" 5 to 10 years' experience in Project or Systems Engineering.

" 2+ years' experience in SAP and EBP or other Enterprise procurement software.

" 2+ years of proficiency in Microsoft Office tools (MS Project, Excel, Word, PowerPoint).

" Must have a passion for winning and bias for action

" Due to ITAR and software requirements, candidate must be US Citizen.



Additional Qualifications:

" Good communications skills and be able to work well in a team environment

" Earned Value Mgmt. System (EVMS)

" Project creation and management - Project scheduling and financial reporting.

" Database Mgmt. - Ad hoc reporting (excel, access, PowerPoint).

" Visual Basic in Microsoft Excel

" Teamcenter, ECR/ECO Process, EBOM, SCS/ASL

" Experience in working cross-functionally with a larger Engineering Organization and multiple sites highly desired

" Adept at SAP problem solving; effective decision making and innovation

" Driven to product improvement; responsive; has a service mentality; achieves quality results

" Promote customer satisfaction with capability to establish strong business and interpersonal relationships with customers and suppliers including internal *** Aerospace centers of excellence (COE)

" Able to prioritize and resolve conflicting due dates

" Prioritizes time and resources effectively

" Ability to execute to cost, schedule and technical re

 
Job Number: 19-21357
Job Location: Phoenix, AZ
Rate: 36.14USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-15 00:00:00.0
Start Date: 2019-06-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ice protection Design Engineer

Description:
Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents. Troubleshooting activities in both production and field environments.
Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
Required:
Engineering Degree Required
o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design
o Preferred: CATIA V6 and Enovia experience
 
Job Number: 1910101914
Job Location: Wichita, KS
Per Diem: Split
Overtime: Possible
Duration: 6-12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-365
Job Location: Savannah, GA
Rate: $55-$58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.

Unique Skills:
• Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope.
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities.
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge.
• Leads the development of innovative principles and ideas.
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements.
• Works under consultative direction; uses independent judgment to accomplish objectives.
• Develops standards and guides for diverse engineering activities.
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program.
 
Job Number: 24-361
Job Location: Savannah, GA
Rate: Up to $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis.
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 24-360
Job Location: Savannah, GA
Rate: $55/hr.
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear and Hydraulic Systems Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-038
Job Location: Greensboro, NC
Rate: Up to $70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Description:
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews
Willingness to support weekend shift operations
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Is consulted extensively by associates and others as a recognized authority within the field
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
Has an approach to problem solving, balances technical product cost, and scheduling
Works without appreciable direction; work is reviewed from a long-range perspective for desired results
Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product


Qualifications:
Bachelor's Degree in engineering, Mechanical, Aerospace, or similar engineering discipline or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with a bachelors degree. Experience credit considered for related advanced degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required
Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.
 
Job Number: 309
Job Location: Mojave, CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572 & S8752574
Job Location: Clearfield, UT
Rate: 50-60
Per Diem: no
Overtime: Yes
Duration: 12 month Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Operator

Description:
Position: Machine Operator

Pay Rate: $10.25 - $11.25

Shift: 1st 7am-7pm / 2nd shift 7pm-7am

Location: Cleveland, OH



Description:
I. Position in Organization


Reports to: Department Supervisor

Directly Supervises: None

Indirectly Supervises: None



II. Major Responsibility


Operate multiple swab machines while maintaining a safe work environment and meeting all production and quality standards.



III. Specific Responsibilities


Have thorough knowledge and understanding of the swab machine operating procedures.

Follow all quality procedures and perform all required quality checks.

Follow all department and machine safety rules and procedures.

Keep work area clean by assisting with sweeping of the cell.

Keep scrap and recycle down to a minimum.

Complete all reworks.

Complete all necessary paperwork including, but not limited to, runtime and production output.

Make minor mechanical adjustments to machines.

Follow all procedures for machine cleaning to maintain machine cleanliness.

Complete all special projects and/or assignments as directed by the lead or supervisor.

High School Graduate or GED Equivalency preferred.



VI. Experience


Prior manufacturing experience preferred.



VII. Skills


This position requires constant standing. Ability to work in a fast-paced environment needed with a keen attention to detail. Ability to lift up to 25 pounds. Adequate English skills as well as basic math skills are required.


V. Tools Used

Screw driver / Wrench / Flipper / Pusher / Scraper



Please contact Nesco Resource for further information at Bedford@NescoResource.com or 330-926-9680. We accept applications Monday-Thursday 8:30AM-3:00PM and Friday 8:30AM-2:00PM. 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-16582
Job Location: Cleveland, OH
Rate: 11.25USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Carlos Carvalho
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
Nesco has a direct hire opportunity for an Electrician with a residential or commercial background to work in a manufacturing environment. Some mechanical aptitude as it relates to machine maintenance is a preference.

Run conduit, pull wire, panel wiring, replacing breakers.



ESSENTIAL RESPONSIBILITIES & DUTIES

  • Follow all safe workplace practices, comply with all applicable safety and health rules, and actively participate in safety programs.

  • Read and interpret schematic drawings and documentation and initiate revisions when applicable.

  • Follow daily work activities schedule to meet maintenance objectives. Estimate materials and time needed to complete activities to ensure completion of tasks.

  • Install, maintain and repair secondary electrical systems, such as but not limited to, general wiring, lighting and communication systems.

  • Install, maintain and troubleshoot power equipment systems.

  • Install, maintain and troubleshoot rotating equipment, motor drives and associated control systems.

  • Install, maintain and troubleshoot stand-by power systems and associated equipment.

  • Maintain and operate test and measuring instruments and equipment to determine functional operation of electronic and electrical systems.

  • Maintain and troubleshoot industrial instrumentation devices and associated systems.

  • Perform preventive and predictive maintenance as established by maintenance program.

  • Maintain documentation to record performance problems, repairs, calibrations, and tests.

  • Communicate with other departments to identify and troubleshoot equipment problems.

  • Trains and provides subject matter expertise to Industrial Electricians.

  • Responsible for immediately reporting any safety, quality or plant security issues to management for appropriate action




ESSENTIAL SKILLS & ABILITY


  • Problem solving—identifies and resolves problems in a timely manner, gathers and analyzes information skillfully.




  • Planning/organizing—prioritizes and plans work and uses time efficiently. Attention to detail, organized, able to meet deadlines.




  • Quantity—meets productivity standards and completes work in a timely manner.




  • Adaptability—adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events. Can function as a self-starter with the ability to work independently.




  • Dependability—consistently at work and on time, follows instructions and responds to management direction.

  • Safety and security—observes safety and security procedures and uses equipment and materials properly. Ability to read and interpret safety rules and instructions which are posted in English.

  • Communication - effectively and professionally conveys information internally and externally through verbal and written communication skills. Actively listens, communicates clearly, concisely and assures understanding.

  • Ability to calculate figures and amounts, add, subtract, multiply and divide numbers.

  • Function as a self-starter with the ability to work independently.

  • Detail-oriented and organized, able to work in a fast-pace environment and meet deadlines.

  • A demonstrated ability to prioritize, follow through, and manage multiple projects.

  • Ability to read and interpret safety rules and instructions which are posted in English
















ESSENTIAL QUALIFICATIONS, KNOWLEDGE & EXPERIENCE


  • High school diploma or GED

  • Associate's Degree (two year college or technical school) in Industrial Technology or similar field; or completion of recognized apprenticeship as maintenance; or equivalent work experience or vocational training is preferred.

  • 4 plus years of relevant maintenance experience.

  • Knowledge of basic instrumentation and calibration, preferred.

  • Experience in a manufacturing or industrial environment, preferred.

  • Basic proficiency in Microsoft Office

  • Knowledge of Programmable Logic Controllers

  • Knowledge of computerized maintenance management systems (CMMS), preferred.

  • Electrical Certification preferred.

  • Ability to work flexible days and hours to support business needs




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-18777
Job Location: Phoenix, AZ
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-04-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10873
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10863
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11033
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The Manufacturing Engineer position requires a Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired. Candidate must have 10+ year’s of experience working on the manufacture of complex mechanical systems.

Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.

Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11025
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
JSG is hiring a Manufacturing Engineer for a 15+ months contract opportunity in Bridgeport, CT!

Description:

The Airframe Process Engineer is required for 2nd shift to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning. The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs. Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing a produciblity review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications. Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations. The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.

This position reports to Process Engineering Black Hawk Lead
This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment. Good communication skills are required.
5+ years of Airframe Process Engineering required. The candidate must be proficient in all processes associated with Airframe Process Engineering. Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
Candidate must be flexible in regards to work schedule and willing to support off shifts and weekends.
BS in Mechanical Engineering, Aerospace or Manufacturing Engineering required
Travel: 10% Travel Required
 
Job Number: 372954
Job Location: Bridgeport, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have an Bachelor's Degree****

Job Description:
- This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.
- Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
- Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
- Must be able to perform cost estimates, work to schedules, and write procedures and policies.
- Must be able to review drawings and concepts and resolve producibility concerns.
- Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
- Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
- Must be able work well in an integrated product development/ design environment.
- Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
- Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
- The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
- Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.

Experience/Qualifications:
- Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
- Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
- Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
- Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
- Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
- Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10853
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable.
• US Person is required
 
Job Number: 10732
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10696
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1549-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 1
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions

Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1549-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1546-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 6/3/2019
End Date: 11/22/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
Rate Details

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1546-1S
Job Location: Lexington, KY
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Background in structures planning preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11053
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Unique Skills:
Background in structures planning preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.




The Structures Company is an AA/EOE.
 
Job Number: 317
Job Location: GA
Rate: $50/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support.
2. Candidates must have experience with Catia V5.
3. Experience with Solumina and SAP is preferred.
4. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11005
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Must be willing to work 2nd shift if needed.
2. Aircraft interiors experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11017
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
2. Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 3+ years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10956
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Shift: Weekend 1st Shift - Friday to Sunday from 5:30 AM – 6:00 PM and Monday from 5:30 AM to 9:30 AM
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. SAP and Solumina experience preferred

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10916
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Experience in a composite fabrication/bonding environment preferred.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-351
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
SOLUMINA_CATIA_SAP_MANUFACTURING_MECHANICAL_ELECTRICAL ENGINEERING.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10156
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 1 / Level 2

Description:
Location: Canoga Park, CA
Rate: Level 1 = $30.00 - $33.00/HR
Level 2 = $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 9/80
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.

Education:
Level 1: Bachelor's degree in an appropriate discipline, or an equivalent combination of education and experience.

Level 2: Requires a Bachelor's degree in an appropriate discipline and 2 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 11084
Job Location: Canoga Park, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Level 4 = $50.00 - $61.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** The Hiring Manager is looking for candidates who have significant experience supporting machining and welding operations **

** Onsite interviews required **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.

Education:
Level 3: Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Level 4: Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 11085
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Specialists - Assembly

Description:
STS Technical Services is hiring Manufacturing Specialists – Assembly in Dallas, Texas.

Position Title: Manufacturing Specialist I
Location: Dallas TX 75243
Shift: First shift – normally starts at 7 a.m.

Electronic Assembly of Radiometric Cameras Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget. Normally receives detailed instructions. Assignments tend to be routine in nature.

Job Summary:
Electrical assembly and test of radiometric cameras.
Load and unload cameras in environmental test chambers.
Responsibility to include throughput and quality of these operations
Interprets Process Flow Instructions and other written or verbal instructions
Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices.
Recognize, communicate, and respond to process deviations and help identify root cause and corrective actions.
Other duties as assigned
Qualifications You’ll Need:
Education: High School Graduate
Experience: 1+ years
Desired Skills:
Basic math and reading comprehension skills
Computer literacy
Mechanical inclination
Familiarity with small hand tools (Torque screwdriver, hex wrenches, etc…)
Electronic assembly experience.
About STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you have questions and want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47746
Job Location: Dallas, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technicians

Description:
STS Technical Services is now offers Manufacturing Technician jobs in Dallas, Texas.

Position Title: Manufacturing Technician I
Location: Dallas TX 75243
Shift: 2nd shift – normally starts at 2pm

What You’ll Be Doing:
Provides routine technical support to engineers and scientists on standard components, devices, material, products, processes and/or equipment
Responsibilities may include testing, modifying, reworking, repairing, and building electronic, optical or mechanical assemblies.
Work from standard wiring and assembly drawings, operation sheets, engineering specifications and sketches
Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches and running sheets of significant complexity
Design and/or test prototype assemblies and production units
Capable of performing related manufacturing processes
Interpret and follow documents such as SOPs and safety rules
Ability to read, and possibly develop, wiring diagrams, layout drawings, and engineering specifications for system or equipment modifications or expansion, and directs personnel performing routine installation and maintenance duties
Qualifications You’ll Need:
Education: High School diploma or GED equivalent
Experience in handling small delicate components using ESD practices
Must be experienced in the safe handling of chemicals.
Experienced in the use of various computer applications, including Access, Excel, and Labview.
Must have good hand and eye coordination 2 years industry experience in assembling electronics or semiconductor components.
Desired Microsoft Office (WORD, Excel, Outlook).
Performs electro-mechanical assembly, disassembly and rework.
Some test and repair of various electronic products and mechanical assemblies.
Associate degree in electronics is desired but not required.
Expoxy dispensing experience Soldering experience
Desired Skills:
Associate’s Degree in related discipline with 2+ years of experience or equivalent combination of education and experience.
Experienced with Final Test/Acceptance Test.
Must demonstrate strong decision-making and leadership skills.
Experienced in the use of various computer applications, including Microsoft Office (Outlook, Excel, Word)
About STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you have questions and want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47830
Job Location: Dallas, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-144927
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Preferred skills:
- Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related advanced degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11072
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Completions Design / Aircraft Cabin Interiors. -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head. -Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
 
Job Number: 19-144927
Job Location: GA
Rate: $58.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Must Be Eligible for a Secret Clearance.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using SolidWorks Software. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 46180
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Experience with PTC CREO 4.0 creating models and drawings
Familiar with military vehicles

Packaging components into a defined space claim
Experience in selecting appropriate vibration isolation components
Clear communication, written and verbal
Able to be in and around military vehicles
Understanding of and ability to apply GD&T to drawings
Experience analyzing bolted joints
 
Job Number: 46664
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
- Preferred skills: Mechanical Interior Design, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.


Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
- Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development


Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11032
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Independence, OH
Rate: $48.25/HR
Duration: 2 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Primary Responsibilities:
- Report to a design lead
- Create detailed part and assembly definition drawings and models FTA's using Catia V5
- Create associated parts list supporting part definition
- Must be fluent with SMARTEAM PDM.
- Support drawing release schedule.
- Revise/maintain layouts as required under the direction of a senior designer using Catia V5
- Hydraulic actuators
- Oleo-Pneumatic shock struts (single and dual stage)
- Landing gear assemblies
- System routings (electrical and hydraulic)
- Revise detailed parts in support of customer change requests using Catia V5
- Develop and implement changes that will improve installation of systems routings using Catia V5
- Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
- Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
- Utilize analytical skills to support proposed design changes
- Kinematics analysis using Catia V5
- Preliminary structures evaluation
- Understand impact on performance
- Weight impact
- Tolerance stack-up evaluation
- Prepare material for and attend design reviews

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 10903
Job Location: Independence, OH
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a mechanism design engineer.
- A successful candidate will have a complete understanding of the mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction systems, flight control systems, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.

Required Skills:
- 3-D CATIA experience is required.
- Mechanism Design experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10722
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a mechanism design engineer.
- A successful candidate will apply extensive technical expertise with mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction, flight control, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.
- May function in a project leadership role where they manage system performance, budget and schedule.

Required Skills:
- 3-D CATIA experience is required.
- Mechanism Design experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10723
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 10906
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (SMARTEAM PDM)

Description:
Primary Responsibilities:
• Report to a Design Lead
• Create detailed part and assembly definition drawings and model FTA's using Catia V5
• Create associated parts list supporting part definition
• Must be fluent with SMARTEAM PDM.
• Support drawing release schedule.
• Revise/maintain layouts as required under the direction of a Senior Designer using Catia V5
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• Revise detailed parts in support of customer change requests using Catia V5
• Develop and implement changes that will improve installation of systems routings using Catia V5
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Utilize analytical skills to support proposed design changes
• Kinematics analysis using Catia V5
o Preliminary structures evaluation
o Understand impact on performance
o Weight impact
o Tolerance stack-up evaluation
o Prepare material for and attend design reviews

A BS degree is required
 
Job Number: 1910101715
Job Location: Fort Worth, TX
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Interiors

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.

Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


The Structures Company is AA/EOE.
 
Job Number: 316
Job Location: GA
Rate: $55-$68/Hr. **DOE**
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



***ACTIVE SECRET CLEARANCE REQUIRED***

****Strong SolidWorks experience is required



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

"BS in Mechanical Engineering or equivalent experience in an engineering discipline

"Prefer 4+ years of directly related experience

"Experience developing 3D models and detailed drawings

"Ability to develop innovative solutions

"Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

"Experience using SolidWorks and AutoCAD

"Finite Element Analysis application experience

"Familiarity with aircraft cockpit systems

"Simulation equipment experience

 
Job Number: 19-21222
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-20 00:00:00.0
Start Date: 2019-06-24 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a landing gear engineer.
- A successful candidate will have a complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.

Required Skills:
- 3-D CATIA experience is required.
- Landing Gear engineering experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10724
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a landing gear engineer.
- A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.
- May function in a project leadership role where they manage system performance, budget and schedule.

Required Skills:
- 3-D CATIA experience is required.
- Landing Gear engineering experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10725
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Elevator or Automation experience)

Description:
The Mechanical Engineer will perform low to mid complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally, responsible for the CAD support of design projects and execution of Engineering design changes.

Responsibilities
This person will technically lead various product development efforts from a design level including support of elevator verification and validation.

The scope of activities may include component trade-studies, design and development of mechanical components, DFMEA analysis, etc.

This position will also provide product support for a variety of elevator components and systems utilizing interpretation of models, drawings, and wiring diagrams to identify root cause for complex problems and develop innovative solutions.

Participation in technical reviews and audits of components and systems will also be required. This position requires interaction, planning and coordination including cross functional teams spanning from engineering, manufacturing, supply chain, contracting and field personnel.

Education / Certifications
• Bachelor's degree in Mechanical discipline with 3 to 5+ years’ experience
• Master's degree in Mechanical discipline with 1 to 2+ years’ experience

Experience/Qualifications
• Elevator or similar industry (automation) experience preferred
• Understanding of system layouts and performance of weight-driven components
• Understanding of system performance envelopes (“duty tables”) based on component limitations
• Good electrical understanding is a plus (wiring diagrams, motor and control applications)
• Experience with design, development, and test of electro-mechanical systems
 
Job Number: 1910101207
Job Location: Florence, SC
Overtime: possible
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (UG NX)

Description:
RESPONSIBILITIES:
Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.
Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.
Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.
Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.

REQUIRED EXPERIENCE:
Must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory. A working knowledge of FEA and experience with TeamCenter PLM is preferred.

EDUCATION:
Accredited BS in Aerospace Engineering, Mechanical Engineering with 2-4 years. 0-2 years MS Degree in a related field or have 6 years relevant experience.

WORK HOURS:
8:00 - 5:00
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 179799/800
Job Location: Tulsa, OK
Rate: $45/hour
Per Diem: No
Overtime: Not specified
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance KY

Description:
1557-1 Mechanical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 3
Desired Start Date: 6/3/2019
End Date: 12/31/2019

Job Description:
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
• Experience with 3D parametric modeling and drafting in CATIA or similar tool
• Experience with Teamcenter or similar PDM/PLM software tool
• Demonstrated success working in a team-based environment to meet objectives
• Strong communication and presentation skills, both oral and written
• Experience with Microsoft office suite (Word, Excel, PowerPoint)
• BS in Mechanical Engineering from an accredited university
Comments for Suppliers: Desired skills:
• Familiarity with C-130 or other similar fixed wing or military aircraft
• Experience working in an aerospace environment with exposure to DoD customers
• Experience with ANSI/ASME Y14.100 or similar design and drafting standards
• Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
• Experience designing, or working with, sheet metal and machined components
• Experience with creation, review, and approval of engineering change documentation
• Experience with an engineering change process and/or configuration control process

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $22.00 - $63.00 Hourly
 
Job Number: JE-1557-1S
Job Location: Lexington, KY
Rate: 63/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*Two openings; both 9+ years’ experience in (1) electronics wire harness design and (1)Airframe structural design specialist using CATIA V5

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Ability to resolve problems and non conforming parts disposition, root cause analysis

*Per diem split is available for those travelling for this position

*Must have an Active Interim or Secret Clearance (and reinvestigated in last 5 years)

*Engineering Degree



Pluses:

*Experience designing using composites

*Siemens Fibersim experience
 
Job Number: 89
Job Location: Palmdale, CA
Duration: 1year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The candidate will:
• create manufacturing assembly documentation,
• concepts tools,
• provide technical assistance, in order to assemble high quality, high engineered hardware for Space applications.

The candidate must:
• ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• be able to perform cost estimates, work to schedules, and write procedures and policies.
• be able to review drawings and concepts and resolve producibility concerns.
• provide technical support to the manufacturing facility as well as to the external suppliers.
• support failure investigations,
• determine root cause of failure and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• be able work well in an integrated product development/ design environment.
• present to senior management on various topics
• be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Required Experience/Qualifications
• Minimum 1 year of experience.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired Experience/Qualifications
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910102673
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (10+ years experience)

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) Space hardware and ensure that the processes are available.

The Candidate will create manufacturing assembly documentation, concept tools, provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.

The Candidate must:
• ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• be able to perform cost estimates, work to schedules, and write procedures and policies.
• be able to review drawings and concepts and resolve producibility concerns.
• provide technical support to the manufacturing facility as well as to the external suppliers.
• support failure investigations,
• determine root cause of failure, and
• implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• be able work well in an integrated product development/ design environment.
• present to senior management on various topics,
• be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software
• Candidate must be a US person

Desired experience
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing.
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910101258
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (5+ year experience)

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate:
• Will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
• Must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• Must be able to perform cost estimates, work to schedules, and write procedures and policies.
• Must be able to review drawings and concepts and resolve producibility concerns.
• Must provide technical support to the manufacturing facility as well as to the external suppliers.
• Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• Must be able work well in an integrated product development/ design environment.
• Will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• Must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Required Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired Experience/Qualifications
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910100042
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Support Equipment Design Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design.
Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups.
Performs and documents analyses to validate and verify systems and components meet requirements and specifications.
• Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
Supports system components'' designs/proposals standards to provide installation and detail documentation.
 
Job Number: MSDE_Tukwila
Job Location: Tukwila, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Performs verification and validation of component level requirements to approved processes and tools. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works with supplier for identification and review of supplier design changes for acceptability and impact. Trains others. Works under general direction.
Skills:
Software:DOORS
Technical Skills:
•Change Control
•Requirements Development
•Supplier Interaction
 
Job Number: 1113-2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer(Hydraulic System, Actuation & Control)

Description:
Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Supports system components'' designs/proposals standards to provide installation and detail documentation. Interfaces with the factory to provide engineering disposition on build issues and non-conformances. Supports in production fleet with responses on customer issues and coordination on document updates. Trains others. Works under general direction..
 
Job Number: MSDE_WA
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III

Description:
***Several openings in WA***

Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. CATIA V5

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: MechEngWA
Job Location: Tukwila, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
MECHANICAL SYSTEMS ENGINEER

Location: Centennial, CO
Duration: 6 months


Main Responsibilities

In conjunction with system owners, perform the design, analysis, component selection, drawing creation, and integration of bell cranks, brackets, hinge elements, and secondary structure.

Perform drawing check, participate in peer reviews, preliminary design reviews, critical design reviews, mentor junior engineers in skills required for fluid system design and integration
Provide additional bandwidth creating technical drawing packages across the aircraft systems team
Qualifications

3-5+ years experience with fluid system design, analysis, fabrication, test, and integration
Knowledge of metallic component design, analysis, and manufacturing techniques
First principles understanding of stress, strain, material properties and material allowable
Experience with free body diagrams, identifying degrees of freedom and constraints, and synthesizing load cases on complex mechanical systems
Experience with rapid prototype methods and a demonstrated ability to bring conceptual designs to reality quickly
Expert in a major CAD package (NX, CATIA, Solidworks), proficient in drawing creation and geometric dimensioning and tolerancing (GD&T)
Capable designer of secondary structure, able to perform structural hand calculations, and simple finite element analysis of static loading conditions
Able to take practical descriptions of mechanisms and derive simplified load cases.
Experienced in design for manufacturing
Practiced with the selection and sourcing of aerospace components such as valves, filters, pumps, accumulators, instrumentation, clamps, etc
Works well in a team and has leadership experience
It would be awesome if you had:

Experience designing complex kinematic systems utilizing bellcranks and cam mechanisms to perform complex motions
Relevant aircraft system design experience, proficient in aircraft design standards outlined in AC 43.13






___________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56725
Job Location: Centennial, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Landing Gear

Description:
Seeking a Mechanical Systems Engineer with landing gear background

Must have experience with:
• Must have clean sheet design experience
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus
• Must have a BS degree (BSAE, BSME)

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: VA
Rate: $75-$85/Hr.
Per Diem: Yes
Duration: 3-6+ Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043

Description:
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043
8 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

Active Clearance preferred, Secret or TS

Seeking TS/SCI candidates with 3-5 yrs+ exp in payload/spacecraft integration.

- Hands-on detailed work required, including extremely fragile space product installations, modifications, and general handling.
- Ability to demonstrate detailed technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams.
- 100% adherence to established ISO processes, diligence to detail, and efficient execution with quality results for cost effectiveness *absolutely required*.
- Ability to learn quickly. Bonding, taping, torquing, etc. with delicate honeycomb composite/aluminum panels and aluminum brackets a minimum. Must have 'a touch' for delicate equipment. Must have virtually zero defects in workmanship.
- Ability to proactively identify issues, escalate to appropriate channels, and *offer* solutions to engineering for review. -
- Ability to work with diverse team, take constructive feedback from QA support personnel.
- Experience with working inside Clean Rooms, Hazardous Material Handling, Hazardous Operations protocols, and related operational protocols required.
- Knowledge of Excel, Word, Powerpoint, general computer handling, and Tool Control required. ESD, FOD, and 5S management techniques required. 3D CAD, TipQA, Windchill, and CREOView preferred.
- Knowledge of advanced machine shop principles helpful. Little to no machine shop work is done by I&T Techs, but interfacing with Machine Dept. required on occasion.
 
Job Number: TS8946614 and 9293043
Job Location: Dulles, VA
Rate: OPEN
Per Diem: NO
Overtime: yes
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3) years of machining, planning, tool design, or related manufacturing experience.

Position Purpose:
1. Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions:
1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
5. Develop operator set-up sheets for numerical control machines.
6. Develop flat pattern mylars and templates as required.
7. Produce 2-D Catia tool drawings as required.

Additional Functions:
1. May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
2. Assist in formulating Numerical Control policies, procedures, and specifications as required.
3. Perform other duties as assigned.

Other Requirements:
1. Good verbal and written communication skills required.
2. Must be able to read and interpret blueprints.
3. Familiarity with various machining methods, technical writing, and computer use.
4. Must possess good drafting, math, and geometry skills.
5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 11064
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer II

Description:
NC Programmer II

Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements:
• Good verbal and written communication skills required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 24-363
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer

Description:
JSG is hiring a Design Engineer - NX for our client in Long Beach, CA!

Local Candidates preferred.

The primary focus will be on modeling and design of components for commercial aircraft and spacecraft. The ideal candidate will participate in regular meetings to coordinate design details with clients, designers, engineers, and management.

Job requirements:

Composite design experience is a huge PLUS
Siemens NX CAD experience required
Experience with design of composite parts and assemblies
Required including:
Laminates and sandwich structures
Bolted and bonded joints
Integration of composite parts into metallic components
ASME Y14.5 Dimensioning and Tolerancing
Excellent written and verbal communication skills
Demonstrated ability to work independently
Siemens Fibersim experience preferred
CATIA V5 experience preferred

Pay rate: DOE
3-6 months
Composite design experience
 
Job Number: 372825
Job Location: Long Beach, CA
Per Diem: If Qualified
Overtime: Possible
Duration: 3-6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer (Fairfax EfW facility) - Lorton, VA
Location: Lorton, VA

Job Dscription:
Plant Operations Engineering:
• Monitor boiler and turbine performance daily.
• Regular (weekly) facility performance review meetings with Ops Dept.
• Identify areas for improved production and reduced cost, lime usage, boiler cleaning, steam plant line up’s, etc.
• Monthly Operating reports submittals
Boiler Reliability Engineering
Participating in boiler outage inspection services at the facility both during forced and scheduled outages.
• Assist in the preparation of outage planning defining inspection scope, schedule, costs and resource requirements.
• Preparation of Condition Assessment Reports with executive

summary.
• Inspection data compilation, analysis and presentation.
• Develop and revise standard specifications for outage work scopes.
Predictive Maintenance Program Technical Support
Providing engineering support to the facility Maintenance Supervisor for mechanical equipment predictive maintenance program.
Asset Improvement Project Engineering and management; providing engineering for asset improvement project development and execution.
• Coordinate with Regional Engineering Manager for resource support and design review when required.
• Develop work scopes, solicit bids and execute projects.

Technical Standards
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare exception requests of technical standards.
• Prepare Facility Change Notice (FCN) documents for facility changes or improvements. Coordinate engineering review process reviews of all facility FCN’s

Position Requirements
The position requires a degree in engineering and a minimum of 1-3 years of power plant or related industrial experience and a technical background in solid fuel boiler and steam turbines.
Must be proficient in Microsoft Excel, Word and Power Point. Auto Cad experience a plus.


HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantVA
Job Location: Newark, NJ
Rate: $105K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Plant Engineer (Boiler or Turbine exp. And Power Plant or Related Industries)

Description:
Plant Engineer needed for a contract opportunity with Yoh’s client located in Newark, NJ

What You’ll Be Doing:
Principal Duties and Responsibilities:
Provide plant engineering and design support services for the Covanta Essex Facility.
Boiler Reliability Engineering:
Provide boiler outage inspection services for the Essex facility.
• Plan, organize and execute boiler outage inspections
• Serve as lead engineer for inspections during boiler outages
• Prepare boiler outage Condition Assessment Reports
• Compile and analyze inspection data
• Develop and revise standard specifications for boiler outage work scopes
• Develop repair and capital improvement work scopes and cost estimates
Plant Operations Engineering:
• Plant performance results engineering
• Preparation of plant monthly performance reports
• Boiler combustion controls engineering support
• Identify areas for production improvement and cost optimization
Asset Improvement Project Engineering:
Provide engineering and design support for asset improvement project development and execution.

Technical Standards:
Maintain the Covanta Technical Standards and Service Bulletins as required.
• Prepare technical standards variance requests as required
• Write and revise detail technical specifications for use by the Facility
• Prepare Facility Change Notice (FCN) documents for the review and approval of facility changes or improvements.

Position Requirements
• This position requires excellent written and verbal communication skills as it will interface with all levels of the organization.
Candidates must be able to travel to other facilities, if needed, and have the ability to work in close conditions to accomplish proper inspections.
Direct boiler experience preferred but not necessary. To be considered for this position, candidate must have a minimum of 10 years’ experience, and a bachelor’s degree in either mechanical or industrial engineering.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com

ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APPlantNJ
Job Location: Newark, NJ
Rate: $100K Plus
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer(Mechanical/Structures/Assembly)

Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes.
Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs.
Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies.
Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.
Responsible for implementing automated equipment and processes for use on 777-9 airplane composite wing assembly.
Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.
 
Job Number: MPP2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product/Hardware Quality Engineer

Description:
Position : Product/Hardware Quality Engineer
Location: Bothell, WA
Duration: 12 months

Description:
Position is for a Product/Hardware Quality Engineer.
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product. Collaborates with engineering and manufacturing functions to ensure quality standards are in place. Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. Audits quality systems for deficiency identification and correction. Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. May be certified in lean and six-sigma quality engineering methodologies.

Skill/Experience/Education:
Product Quality Engineer will be responsible to support daily quality activities on a product base which includes precision machined parts, weldments, large assemblies.

Duties Will Include:
Review of shop floor documentation including travelers and inspection plans; First Article Inspection (FAI) documentation; auditing; inspection criteria guidance to inspectors; disposition hardware; interface with customers; support sell-offs with government customers; actively engage in cross functional teamwork with Manufacturing Engineering and Manufacture Program Managers. Support evaluations and drive root cause analysis; participate in developing solutions to technical problems. Track defects, monitor trends, disseminate data and participate in resolution. Mechanical Engineering, Chemical Engineering or Mechanical Engineering Technology Degree Knowledge of Geometric Dimensioning and Tolerance (GD&T). Experience with reading engineering drawings Ability to communicate effectively (written and verbal) with peers and customers
 
Job Number: 19-07121
Job Location: Bothell, WA
Rate: Open
Per Diem: YES
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
Project Manager

Windsor Locks, CT
$48.25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
Manage high complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Project Engineer to Manage a team and provides direction development, design, and testing of components, for manned space applications. This will included extensive supplier technical management. UTC Aerospace Systems (UTAS) is one of the world’s largest suppliers of technologically advanced aerospace and defense products. ISR & Space Systems is a business unit within UTAS and our products reside in deep space, low earth orbit, undersea and on the ground. We are also a major supplier to international space programs. The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support Systems on the International Space Station, including the space suit, and undersea in submarines. Project Engineering Integrated Product Development (IPD) Team Lead will provide continuous support of NASA’s vision to develop and expand science capabilities aboard the EMI Program for the next decade. Manned Space capabilities are enabled by the life support hardware and engineering services provided by the EMU program in Windsor Locks, CT.

The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components. Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and UTAS Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. This position requires creation and delivery of technical presentations to management and customers.

*Education / Certifications
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 4+ years leading teams and managing projects *Experience/Qualifications Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with new product introduction and product life cycle from concept to qualification (preferably leading new supplier design and development efforts for motors, actuators, and sensors including various system integrations)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in weekly/monthly reviews with customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Provide quarterly sales support to Program Management through effective supplier invoicing plans and strategies
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 10239
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Background in the mechanical or manufacturing arena, will be responsible for Supplier oversight and compliance as well as disposition of non-conforming material in house.

Ability to support travel to other company facilities, Government installations and subcontractor facilities.

Military experience and familiarity with military vehicles a plus

Candidate must be able to read and interpret technical drawings and models, with a working knowledge of GD&T

Working knowledge of ISO 9000/equivalent preferred
 
Job Number: 46851
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Responsibilities:

This position provides organizational support for customer programs and supplier quality requirements. The candidate will be responsible for quality engineering, system, and process improvements and RCCA activity including non-conformance analysis and implementation of effective countermeasures.

Lead quality functions for assigned programs from proposal through shipment to the customer while complying with customer requirements and achieving cost and delivery expectations.
Actively participate in IPTs and leads FMEAs.
Host customer quality audits and participates in internal quality audits.
Interface with suppliers and customers concerning program quality requirements.
Issues and coordinates effective completion of supplier corrective actions (SCARs).
Coordinates internal and supplier Corrective and Preventative Actions (CAPA).
Provides advice and guidance in interpreting and adapting quality standards and regulations.
Works closely with Engineering in bringing quality products to production readiness.
Leads quality in production activities: materials, process and customer requirements.


Requirements:

BS/MS in science or engineering discipline with emphasis in mechanical engineering
5+ years of quality engineering experience in an Aerospace environment.
Experience with high precision machined parts and assembly operations.
Interpreting customer specifications and implementing an effective quality assurance program.
Knowledge and understanding of current ISO 9001/AS 9100 quality systems.
Working knowledge of engineering specifications, drawings and GD&T.
Knowledge of process capability concepts including Statistical Process Control (SPC) techniques.
Strong analytical and problem-solving skills.
Working knowledge of continuous improvement, lean manufacturing, and GEMBA
Strong skills in MS Windows – Excel, Word and PowerPoint.
Excels in a dynamic work environment.
Energetic, ability to work independently, possesses an entrepreneurial spirit.
Must be willing to travel as required.

Desired skills:

Six Sigma Black or Green Belt.
ASQ CQE/CQM Certification.
Experience working in military or aerospace quality systems.
Significant experience working directly with customers and suppliers.
 
Job Number: 373477
Job Location: Moorpark, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector II ( Chandler, AZ ) 9246578

Description:
Quality Inspector II ( Chandler, AZ ) 9246578
12 Month Contract

Pay rate: $20/hr

Job Description:
• Perform inspections on product received from Suppliers (both EEE and Mechanical) to include review of documentation as well as physical verification of the received products.

Prerequisites:
• Minimum 1 year of experience in Quality Inspection in a Receiving Inspection environment
• Must be able to read engineering documentation and inspect to drawings and parts lists, inspection plans, and supplemental instructions
• A sound understanding of GD&T
• Hands-on knowledge of inspection methods and techniques
• Be willing to work overtime as needed and or 2nd shift if required.
• Able to use Microsoft applications (Word, Excel, etc.)
• Have a demonstrated ability to work with minimal oversight and in a multi-discipline team environment, providing insight and solutions to complicated issues both technical and procedural
• Be safety oriented.

Desirables:
• Previous use or knowledge in CMM's and FARO arm equipment (or equivalent)
• Knowledge of AS9100, ISO9000, and other related quality standards.
 
Job Number: 9246578
Job Location: Chander, AZ
Rate: 20
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Stress Engineer

Description:
Senior Stress Engineer

Colorado Springs, CO
$65/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

This position is for a Senior Stress Engineer that will support product development teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to engineering team based upon analysis results. Position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.


Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

*Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

*Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem solving skills
 
Job Number: 11024
Job Location: Colorado Springs, CO
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structural / Stress Engineer (MADYMO experience required)

Description:
This position will support Product Development Teams throughout the design/development process by leading and performing detailed stress analysis and validation of aerospace structural components and assemblies. This individual will have the ability to work independently and provide direct guidance or direction to the engineering team based upon analysis results. This position serves a Shared Service Stress organization for all specialty seating projects. Products include Ejection Seats, VIP Passenger Seats, Pilot Seats and Cabin Attendant Seats.

Essential Responsibilities:
• Perform and/or check structural analysis and simulation using conventional classical stress analysis methods
• Perform and/or check structural analysis and simulation using finite element analysis
• Experience with non-linear analysis is preferred but not required
• Derive component applied loads and aircraft interface loads
• Work to pre-establish design parameters and requirements to assess the structural integrity of metallic (and occasionally non-metallic) aerospace component parts
• Develop and document structural tests to assess the structural integrity of component parts and to validate that all requirements are met
• Document results of the stress/loads analysis in a formal report, pursuant to obtaining FAA certification
• Create and/or check informal strength check notes
• Lead the development of analytical tools and procedures, with the goal of improving the effectiveness, quality and efficiency of the design/development process
• Evaluate and disposition manufacturing and/or in-service issues (sustaining engineering)
• Lead efforts to interface with other functional groups such as Design, Systems, Test, and Liaison et al as required
• Facilitate integration between stress and interfacing functional groups
• Lead resolution of general technical issues related to stress analysis and simulation
• Serve in a technical lead capacity to establish robust planning inputs to large project schedule development and support performance to plan

Skills Required:
• LS-DYNA experience
• ABAQUS experience
• HyperMesh for FEA model creation experience
• Unigraphics NX CAD experience
• Strong written, verbal, and interpersonal skills
• Ability to multi-task and prioritize both daily issues and longer-term projects
• Experienced with MS Office suite of tools
• Dynamic and quasi-static nonlinear analysis.

Competency Expectations:
• Adaptability-Adjusts to business changes and priority shifts
• Analytical Thinking & Problem Solving - Identifies root causes, secures relevant information and identifies solutions
• Communication - Strong written, verbal and interpersonal skills
• Teamwork - Facilitates inclusion, works well with others, and leverages diversity for success

Education / Certifications
• BA/BS degree w/7+ years’ experience
• MA/MS degree w/5+ years’ experience
• Degree must be in Mechanical, Aeronautical/Aerospace or Civil Engineering.

Experience/Qualifications
• Major airframe, aircraft on-board cargo systems, aircraft seats (fixed and ejection), aircraft evacuation systems, aircraft cabin systems and aircraft interiors
• In depth understanding of structural FAA certification requirements for commercial aerospace products
• Engineer should have a strong understanding of strength of materials, excellent analytical skills and problem-solving skills
 
Job Number: 1910102563
Job Location: Colorado Springs, CO
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer

Description:
Location: Huntsville, AL
Rate: $60.00 - $68.00/HR
Duration: 1 year contract
Schedule: 9/80
Overtime: Possible
Per Diem Split: Yes

**Candidates must be U.S. Citizens**
**MUST have an Active Secret Clearance or to have had one within the last 2 years**

** This is a Mechanical design focused Systems Engineer with DOORs/Specification management in a design development environment. Looking for someone who has worked on hardware systems product development, especially with aerospace and propulsion (rocket is a PLUS) experience. **

** This is a HARDWARE SYSTEMS role (not Software Systems) **

Job Description:
Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
- May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

60% - Develops hardware and software requirements for solid, liquid, and electric rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in requirements database and specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis and coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (product development cycle requirements management, risk management, integration) for aerospace/rocket propulsion system design development.
-Experience with IBM Rational DOORS requirements management software.
-Experience with MicroSoft Access strongly desired.
-Systems Engineering Planning and implementation in requirements management
-Verification planning; milestone review coordination
-Risk management coordination
-Design development cycle requirements management and verification planning (with DOORS or similar tool experience)
-Specification change management
-Interface control
-Milestone review coordination
-Risk and opportunity management coordination
-Model Based Systems Engineering (using SysML) is desired.

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Aerospace).
 
Job Number: 11078
Job Location: Huntsville, AL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Engineer Mechanical 4 / NX CA

Description:
164949/1762
Sr Principal Engineer Mechanical 4 (Job Number: 19012881)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: May 28, 2019

Target End Date: May 22, 2020

WorkWeek: 9/80a

Duration: 1 Year

Min - Mid Range: $60 to $65/hr - Based on Experience (BOE)

Researches, plans, designs and develops mechanical products, thermal for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
Preferred Qualifications:

Extensive knowledge in NX8 or NX11 and Team Center experience is preferred
 
Job Number: JK-1762
Job Location: El Segundo, CA
Rate: 60-65/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Composite Structural Design Engineer

Description:
Seeking a Sr. Composite Structural Design Engineer to develop solutions to a variety of complex or unusual problems or assignments requiring independent judgment and ingenuity. Originates and/or modifies engineering protocols related to the design and development of aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.

Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or computer aided drawings and engineering reports.

Requirements:
• Must have 6-10 years of composite primary & secondary structural design experience.
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Must have experience with CATIA V5, SmarTeam, Composite Ply Definition, CPD or Fibersim
• Knowledge of ANSE Y14.5 dimensioning and tolerancing

The Structures Company is an AA/EOE.
 
Job Number: 315
Job Location: OK
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Controls Design Engineer

Description:
Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Define primary and secondary Flight Control System schematics and architecture
• Develop component level requirements derived from top level system requirements
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Review work performed by others and ensure work is to the highest standard.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.
• Leads or participates in design / development reviews with management and internal customers.
• The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must be familiar with Material Review Board processes.



Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with 10-15 years directly related experience
• MS / MBA with 8-13 years of experience OR 18-23 years directly related experience
• Some Travel will be required

Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Use of Team Center.
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP.
Ability to work in a constant state of alertness and safe manner.




The Structures Company is an AA/EOE.
 
Job Number: 300
Job Location: NC
Rate: $60-$72/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer 5 / NASTRAN, FEMAP CA

Description:
1758 Staff Structural Analysis Engineer 5 (Job Number: 19009696)

Number of Openings: 3

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Jun 19, 2020
Pay Rate: $82 to $84/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year
3 Openings

Seeking a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.



Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 12 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.



Preferred Qualifications:

• Experience working on military aircraft
 
Job Number: JK-1758
Job Location: El Segundo, CA
Rate: 84/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis Engineer

Troy, OH
$65/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead. Prepare static and fatigue analyses in support of drawing releases, development of qualification test requirements, and documentation of stress analyses for Customer review and MRB support. All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Job Details:
Bachelor's degree or equivalent in mechanical/aerospace/structural engineering or related discipline with a minimum of 10 years of directly related stress analysis experience is required.
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods is required
• Clear understanding of external loads, load paths and development of component and system free body diagrams is required.
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows is required.
• Strong written and verbal communication skills is required.
• Prior experience with ABAQUS or ANSYS FEA is required.
• Strong understanding of aerospace materials is desired.
• Working knowledge of CATIA V5 is desired.
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter) is desired.
• Good understanding of manufacturing processes is desired.
• Strong interpersonal skills is desired.
 
Job Number: 10993
Job Location: Troy, OH
Rate: 65.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9178558

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9178558
12 Month Contract

Pay Rate: $70-80 /hr

** Active Secret Clearance Required

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies
The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub elements.
Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE, with last investigations within the last 4 1/2 years.
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function
• Minimum of 8 years of experience with Nastran or ABAQUS
• Static, dynamic and thermostructural analysis experience
• Test lab experience, including instrumentation and data reduction
• Knowledge of composite materials and manufacturing processes
• Excellent oral and written communication skills
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team
Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9178558
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4-Tukwila

Description:
Structural Analysis Engineer 4

Location: Tukwila, WA
Duration: 11 months

Description:
Looking for experienced senior structural analysis engineer to support client Defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program). Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Works under minimal direction.

Skills:
Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Advanced
Software Skills Nastran Yes Advanced
Software Skills Patran Yes Advanced

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctor of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- Must have 9 or more years’ experience in structural or mechanical systems analysis or finite element analysis
- Significant experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code:
63Y-Structural Analysis.
 
Job Number: 19-05775
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 11 months
Start Date: 4/25/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance GA

Description:
1594-1
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 6/10/2019
End Date: 6/12/2020

Job Description:
Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.). Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgement on the credibility of the data received and the results obtained. Take part in drawing up the measurement plan applicable to the tests, and analyses the results. Required experience with structural mechanics simulation software and ANSYS. Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software, as well as knowledge of MIL-HDBK-5 is also required. Candidate must have working knowledge/experience with Computer Aided Design software tool CATIA V5. Candidate must be capable of interpreting detail, assembly, and installation type drawings.

Work Location: Marietta, GA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $69.00 Hourly

Areas of Expertise Electro-Mechanical Yes 1
Areas of Expertise Mechanical and Electrical Systems Yes 2
Software Skills Ansys Yes 2
Software Skills Finite Element Analysis (FEA) Yes 1
Software Skills Nastran Yes 1
Software Skills Patran Yes 1
Technical Skills Stress Analysis Yes 1
 
Job Number: JE-1594-1S
Job Location: Marietta, GA
Rate: 69/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWinHon
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer (Landing Gear)

Description:
The ideal candidate will:
• conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead.
• prepare static and fatigue analyses in support of drawing releases,
• develop qualification test requirements, and
• Document stress analyses for Customer review and MRB support.

All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. The Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Requirements:
• Bachelor's degree or equivalent in Mechanical / Aerospace / Structural Engineering or related discipline
• Minimum of 10 years of directly related stress analysis experience
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods
• Clear understanding of external loads, load paths and development of component and system free body diagrams
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows
• Strong written and verbal communication skills
• Prior experience with ABAQUS or ANSYS FEA

Desired Competencies:
• Strong understanding of Aerospace Materials
• Working knowledge of CATIA V5
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter)
• Good understanding of Manufacturing Processes
• Strong interpersonal skills
 
Job Number: 1910102322
Job Location: Independence, OH
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer - Stress 5 / FEMAP NX CAE FL

Description:
164612
1757 Structural Engineer - Stress 5 (Job Number: 19005364)

Number of Openings: 2

Location(s): United States-Florida-Melbourne

Shift: 1st Shift

Target Start Date: Apr 15, 2019

Target End Date: Sep 25, 2020

Rate: $83/hr

Location: Melbourne, FL.

Work Schedule: 9/80

Duration: 6 months

Perform fatigue and detailed stress analysis of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program. Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives. The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. Tools utilized may include FEMAP, NX,Teamcenter and other software applications.


Basic Qualifications

Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis; 12 years of experience with a Masters Degree.


Preferred Qualifications

Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
 
Job Number: JK-1757
Job Location: Melbourne, FL
Rate: 83/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Stress Analysis Engineers II, III, & IV- (WA)

Description:
***Several openings in the Seattle/Everett, WA areas***

Experience with aircraft structures, analytical skills, design/produce process, engineering analysis and/or design/test/certification regulations is essential. Work location is in various Puget Sound locations.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.

• Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
• Must be a U.S. Citizen
• Must have 9 or more years experience in structural or mechanical systems analysis or finite element analysis
• Significant experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems
 
Job Number: StressWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural/Stress Analysis Engineer

Description:
Stress Analysis (MECHANICAL ENGINEER IV) (281-1)
6 months initially
Location: Centennial, CO

Strength Engineer to conduct strength analysis for structural design for the launch vehicle upper stage.

The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies.

Requirements

•U. S. Citizen or Permanent Resident (Green Card holder)

•Requires a bachelor’s degree and 8 years of experience

•Finite element analysis will use NASTRAN/FEMAP.

•Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.

•Knowledge of super elements will aid in efficient non-linear analysis.
 
Job Number: 354
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural/Stress Engineer

Description:
Structural / Stress Engineer

Location: Independence, OH (44131)

12 month contract



Bachelor's degree or equivalent in mechanical/aerospace/structural engineering or related discipline with a minimum of 10 years of directly related stress analysis experience is REQUIRED.



The ideal candidate will conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead. Prepare static and fatigue analyses in support of drawing releases, development of qualification test requirements, and documentation of stress analyses for Customer review and MRB support. 



• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods is required
• Clear understanding of external loads, load paths and development of component and system free body diagrams is required.
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows is required.
• Strong written and verbal communication skills is required.
• Prior experience with ABAQUS or ANSYS FEA is required.
• Strong understanding of aerospace materials is desired.
• Working knowledge of CATIA V5 is desired.
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter) is desired.
• Good understanding of manufacturing processes is desired.
• Strong interpersonal skills is desired.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56968
Job Location: Independence, OH
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-352
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Required Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10742
Job Location: Savannah, GA
Rate: $65.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
We are looking for an enthusiastic and highly-motivated individual to join us as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.

Responsibilities include:
• system development trade studies and optimization,
• development of concepts of operations,
• developing product requirements at the system/component level for mechanical/electrical/software,
• thermal/fluid/chemical system modeling,
• steady state & transient performance analyses
• component sizing.

Education / Certifications
BS in Mechanical/Aerospace/Chemical/Systems Engineering with 5-25 years of experience

Experience / Basic Qualifications
• Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
• Ability to work well both independently and within an integrated product development (IPD) team environment
• Excellent attention to detail
• Excellent writing & math skills
• Must be a US Person

Preferred Qualifications
• Experience performing thermal/fluid/chemical analyses
• Experience on hardware development program: proposal/development/manufacture/verification/operational support
• Experience performing system development/integration/architecting
• Experience deriving & writing requirements for development hardware (DOORS)
• Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 1910097467
Job Location: Windsor Locks, CT
Per Diem: no
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Per Diem Split: No


****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****


Job Description:
- Our client is one of the world's largest suppliers of technologically advanced aerospace and defense products.
- The ISR & Space Systems business unit provides products and services to global government and commercial markets that enable mission success in the harshest environments in space, in the air, at sea, and on the ground.
- They design and manufacture Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) on a number of space & sea platforms including the International Space Station, the U.S. space suit, and the next generation of space vehicles such as CST-100 and Orion, and the US Navy’s submarine fleet.
- Our client is looking for an enthusiastic and highly motivated individual to join them as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.


Responsibilities include:
System development trade studies and optimization, development of concepts of operations, developing product requirements at the system/component level for mechanical/electrical/software, thermal/fluid/chemical system modeling, steady state & transient performance analyses, as well as component sizing.


Education / Certifications:
- Bachelors in Mechanical/Aerospace/Chemical/Systems Engineering with 5-25 years of experience


Basic Qualifications:
- Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
- Ability to work well both independently and within an integrated product development (IPD) team environment
- Excellent attention to detail
- Excellent writing & math skills
- Must be a US Person


Preferred Qualifications
- Experience performing thermal/fluid/chemical analyses
- Experience on hardware development program: proposal / development / manufacture / verification / operational support
- Experience performing system development/integration/architecting
- Experience deriving & writing requirements for development hardware (DOORS)
- Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 10341
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV

Description:
Location: Jupiter, FL
Rate: $60.00 - $66.00/HR
Duration: 6 month contract
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** This is a Hardware Systems role, NOT Software systems **

Duties:
Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
- May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Education:
- BS Engineering
 
Job Number: 10548
Job Location: Jupiter, FL
Rate: $60.00 - $66.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Optomechanical Engineer

Description:
Johnson Service Group is hiring for a Systems Optomechanical Engineer

JOB DESCRIPTION:

This position requires high precision, hands-on mechanical and optomechanical skills to design, engineer, set up, test, and validate the critical optical and optomechanical components of advanced, complex laser process and imaging automation systems as required following the ISO 9001 quality management system.

RESPONSIBILITIES:

Engineer optical path drawings and related technical specifications
Mechanical layout and detail design drawings for fabrication of mechanical and optomechanical automation systems.
Set up and adjust optical components, such as mirrors and beam expanders, using mechanical and optomechanical hand tools to align laser beam paths
Optimize laser beam characteristics using specialized optomechanical devices, such as collimators and polarizers
Measure laser output power and laser beam quality characteristics using specialized tools to insure laser stability
Employ professional optics care techniques to inspect, clean, and maintain optics, optomechanical devices, and associated tools
Complete clear, comprehensive testing reports to document results and to highlight issues in detail
Operate and test high peak power lasers for the purposes of optical beam path alignment and system validation
Plan and execute the moderate design and documentation tasks such as electromechanical design layouts and detail drawings, electronic packaging (sheet metal) design, bills of materials, assembly drawings, engineering release packages
Develop product structures and bills of materials for custom and standard products
Evaluate and execute document change requests then supply engineering documentation to ECO documentation clerks for entry into ERP system.
Create and update bills of materials
Must coordinate own efforts with others, but this is not a supervisory position.
Travel is required for the position and will typically be less than 10-15% of the year.

REQUIREMENTS:

B.S. in engineering, materials science, physics, optics, or other related technical field preferred Hands-on experience with high precision mechanical or optomechanical tools and components
Manual dexterity, high attention to detail, and ability to work with small tools and optomechanical devices
Past experience with laser processing preferred
Must be self-driven and highly results-oriented, with an aptitude for completing tasks in specified periods of time
Ability to travel domestic and international
 
Job Number: 373447
Job Location: Los Angeles, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Analyst

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience in metallic door structures and mechanism analysis is highly desired.
- Experience in support of design and development of mechanical systems is desired
- 5 years minimum aircraft stress experience required.
- Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
- Strong background in classical stress analysis required.
- Experience with Catia V5 to support stress analysis and drawing release required.
- Experience with FEM analysis methods a plus but not required
- Experience in workflow review and approval process is a plus.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10550
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Engineer

Description:
• Experience in metallic door structures and mechanism analysis is highly desired.
• Experience in support of design and development of mechanical systems is desired
• 5 years minimum aircraft stress experience required.
• Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
• Strong background in classical stress analysis required.
• Experience with Catia V5 to support stress analysis and drawing release required.
• Experience with FEM analysis methods a plus but not required
• Experience in workflow review and approval process is a plus.

Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Experience/Education:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-330
Job Location: Savannah, GA
Rate: $75 - $80
Per Diem: Yes
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Test Engineer

Description:
Must be able to obtain a secret clearance

Related experience working with electrical circuits and/or mechanical design and reading of schematic diagrams/drawings on military platforms.
Must have the ability to troubleshoot electrical/electronic circuits and perform failure analysis as needed.
Must have the ability to design mechanical fixtures and testing apparatuses.
Systems Engineering/ Integrated Product Development process knowledge preferred.
Familiar with military standard specifications: MIL-STD-810
Good knowledge of various test equipment and test measurement methods and environmental test exposure methods.
Understanding of digital electronics, automatic test equipment and software.
Personal computer skills: MS Office Suite required. DiaDem, Lab View, EVMS, ProE, Team Center preferred
 
Job Number: 46610
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tech Spec II - Equipment and Furnishings

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired.
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-343
Job Location: Savannah, GA
Rate: $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III - (Tukwila, WA)

Description:
***Several openings in the Seattle/Everett, WA areas***

Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition for structural test engineering. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition, both model based and 2D drawings, based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional integrated end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. CATIA V5, Enovia

Prefer an AA Degree.
 
Job Number: TechDesTukwila
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer 3 CA

Description:
1752-1 Technical Editor and Writer 3 (Job Number: 19007739)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Apr 29, 2019

Target End Date: Apr 24, 2020

Pay Rate: $44/hr

Work Schedule: 9/80A

Duration: 1 year

Location: Palmdale


Writes, rewrites and/or edits technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals. Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts. Conducts quality review of materials.


Basic Qualifications:

6 Years with Bachelors; 4 Years with Masters


Preferred Qualifications:

Required and Asset Skills & Experience

· Aerospace background with Engineering knowledge (mechanical, aerospace, electrical etc.) and/or hands-on experience in the aerospace maintenance field
· Experience with S1000D, ATA2200 and/or MIL-SPEC specifications is an asset
 
Job Number: JK-1752
Job Location: Palmdale, CA
Rate: 44/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Publications Engineer

Description:
1. Responsible for completing complex engineering research, development and certification requirements for authoring/
illustrating new and sustaining model technical publications.
2. Extensive technical expertise, highly proficient in research and authoring tools utilized to accomplish tasks, with a full
knowledge and understanding of other related disciplines within technical publications.
3. Demonstrated understanding of industry standards and government regulatory requirements affecting the development
and distribution of technical publications.
4. Performs quality control reviews for accuracy and consistency throughout the document development and completion
process to ensure all data conforms to established specifications and regulatory requirements.
5. Subject matter expert and technical advisor tasked with providing assistance, guidance and training to other team
members.
6. Performs a variety of complex tasks. Leads special projects.
7. A wide degree of creativity and latitude expected in day-to-day tasks.
QUALIFICATIONS:
· An understanding of engineering data, with an ability to research and analyze engineering drawings and technical
documents.
· Mechanical aptitude with experience and knowledge of aircraft operation, aircraft systems, aircraft maintenance
practices and aircraft manufacturing.
· Familiar with FAA Regulations and Aviation Industry (iSpec 2200, S1000D, MilSpecs, etc.) specifications and
guidelines.
· Experience using SGML/HTML/XML and/or Arbortext Editor preferred.
· Professional and diplomatic demeanor with excellent verbal and written communication skills.
EDUCATION/ EXPERIENCE:
· Bachelor’s degree in Engineering, Aviation, or related field.
· 7+ years’ experience in technical or related field required.
· A&P and/or Pilot’s license a plus.
 
Job Number: 1910101887
Job Location: Wichita, KS
Per Diem: Split
Overtime: Possible
Duration: 6 - 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Advanced Instrumentation and Data Acquisition Systems)

Description:
This ideal candidate will design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques. The will take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.

This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
• Support laboratory testing of Space hardware,
• Develop and validate tooling concepts,
• Author and maintain operation/test procedures,
• Preparation of standardized operation/test sheets,
• Defining test rig and facility requirements,
• Participation on program Integrated Product Development teams,
• Review drawings and concepts, and
• resolve productivity concerns.

Requirements
Experience with advanced instrumentation and data acquisition systems.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal.
Ability to proficiently operate common Microsoft Office software products

Desired Skills
Knowledge of LabVIEW
 
Job Number: 1910099675
Job Location: Windsor Locks, CT
Per Diem: no
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician TX

Description:
164873
Job Title: Test Technician

Work Site Address: McKinney, TX 75071
Job Number: 9181139
Max Pay Rate: 40.00

Start Date: ASAP
End Date: 12 Months
Position Type: Contract

Job Summary:
Electrical Engineer I with education and experience in performing test and troubleshooting to the component level utilizing schematics and test equipment.

Responsibilities include working with a team of engineers performing electrical tests and troubleshooting on sub-assemblies, assemblies, and systems for conformance to specifications; Understanding and applying the theory of operation for the unit under test to enable determination of faulty product for design, workmanship, environmental and/or component defects. Additionally, the candidate will work on systems validation, test and analysis while working through all phases of integration, test and validation activities within the Labs. As an Electrical Engineer I the candidate will ensure customer success through the development and execution of innovative and comprehensive test, verification, and validation strategies, processes, tools and techniques.

Responsibilities may contain aspects of one or more of the following disciplines:

• Signal processing - analysis and manipulation of signals. Signals can be either analog or digital.
• Communications - transmission of information across a channel such as a co-axial cable, optical fiber or free space.
• Electromagnetics - includes Electromagnetic waves, Transmission Lines and Waveguides, Antennas, Radio-Frequency (RF) and Microwaves.
• Controls - flight and propulsion systems.
• Power - generation, transmission, and distribution of electricity as well as the design of related devices. These include transformers, electric generators, electric motors, high voltage engineering, and power electronics.



Required Skills:
• A minimum of 4 years’ relevant experience.
• Experience in reading, understanding and accurately following prints, schematics, sketches, as well as work from verbal and/or written instructions including test procedures.
• Experience with the design, fabrication and testing of electronic and mechanical sub-systems and CCAs.
• Proven interaction in a team environment
• Must be a self-starter and possess ability to work autonomously while establishing schedule and priorities
• Must have effective communication skills to interface with a wide variety of people including lab technicians, engineers, managers, and auditors
• Ability to clearly document findings encountered during testing and troubleshooting. Microsoft Office tools i.e. Word, Excel, PowerPoint


Desired Skills:
• Experience in missile defense systems is highly desired
• Able to manage and execute to Program Plan
• Ability to make and/or manage technical decisions for the product
• Experience performing engineering tests such as ATP (Acceptance Test Procedure), DVT (Design Verification Test), and DMV (Design Margin Verification)
• Knowledge of programmable electronic parts
• Proven communication and presentations skills with ability to clearly present technical approaches and findings
• Manage and balance the priorities of multiple programs simultaneously
 
Job Number: MB-R9181139ATO
Job Location: McKinney, TX
Rate: 40/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Catia V5 V4 GD&T / 4 openings! - Clearance CA

Description:
164970
1574-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/4/2019
End Date: 6/2/2020

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Applicants must not have applied for Tool Design at LM-Palmdale in the last 6-mo.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly

Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1574-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years preferred****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.
- Must be US citizen.
- Active/Final Secret clearance.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Active/Final Secret clearance with most recent investigation completed within the last 5-years.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.
 
Job Number: 10969
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Design Fabrication w/Secret Clearance EM

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment tools, dies, gauges, jigs, fixtures, and prototype model parts.

Required:
*Active Secret Clearance
*5+ years experience in manufacturing environment in tool design/fabrication
*Strong experience designing using Catia parts, shapes assembly and draft of workbenches
*Engineering Degree

Preferred:
*Experience with structures, materials, sizing of mechanical, hydraulic or pneumatics
*Aircraft tooling and composites experience
 
Job Number: 190
Job Location: Palmdale, CA
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: AP226771
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer (Wing Design and primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWINGHON
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing Design Engineer (Wing Design and primary & secondary structural design exp.)

Description:
Wing Design Engineer needed for a contract opportunity with Yoh’s client located in Greensboro, NC

What You’ll Be Doing:
Structure Designer Engineering responsible for the conceptual design and production engineering of aircraft primary and secondary structure. The candidate will be responsible for conceptual layout, detail design and in-service design and modifications. Will support and paly an integral roll in requirements definition, design reviews and PDRs/CDRs.
Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Perform trade studies to identify optimal engineering solutions
• Collaborates with the Integrated Product Team (IPT) to resolve cross functional issues
• Review work performed by others and ensure work is to the highest standard
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Familiarity with structural analysis methods, load paths, and material properties
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies; define detail parts dimensional requirements to meet final design intent
• Searches for problem root cause and develop corrective action plans and solutions
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Leads or participates in design/development reviews with management and internal customers; the candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

What You Need to Bring to the Table:
Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 10 years of primary and secondary structural design experience
• Must possess a minimum of 4000 hours of experience with Catia V5 or equivalent
• Previous experience on a full-aircraft certification project is desirable
• Some travel maybe required

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Knowledge of analytical tools used to support design reviews (3DCS)
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

HOW TO APPLY:
Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: APWINGHON
Job Location: Greensboro, NC
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: 2-3 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Anti-Ice Design Engineer

Description:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
2. Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems.
3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required.
4. Knowledge of Aircraft Wing and Engine Anti-ice Systems
 
Job Number: 28-039
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: YES
Overtime: YES
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Engine Anti-Ice Systems Designer

Description:
General Summary:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.


Duties and Responsibilities:
• Prepare 3D layout models of the Wing and Engine Anti-ice Systems
• Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems
• Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems
• Work in a team environment supporting liaison engineering to research root cause and address production discrepancies


Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
• 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required
• Knowledge of Aircraft Wing and Engine Anti-ice Systems





The Structures Company is an AA/EOE.
 
Job Number: 302
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search