Job Search Results

664 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/06/05 Friday 06:18PM Pacific Time by ContractJobHunter. )

Listings 1 - 664

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 02/18/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2603 - PROJECT MANAGEMENT - cv, word doc only

Description:
Evaluate, participate and manage continuous improvement initiatives required to manufacture aircrafts & methods processes.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, implementation and commissioning.

Manage the budget, the schedule and the resources in every project phases. Prepare and present progress status at different management levels.

Align resources involved in project and be the intermediary between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

A minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Possess strengths in human resource management as part of matrix project management.

PMI certification (asset).

Good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Be passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2603
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - only 3 mths
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2604 - LIAISON ENGINEER (MRB) - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components and Interiors.

Support to Production, Design Engineering, Procurement, Methods and Quality in coordinating resolutions to
issues.

Review & trouble shooting of all Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of A/C Interior issues in conjunction with Design Engineering as required.

Review & prepare disposition on Green Aircraft issues and Create Repair Engineering Orders, as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Support production and Methods as required.

Formal education to degree level in mechanical/aerospace engineering or related field, coupled with a minimum
of one year MRB experience or three years design experience in a Mechanical or an Aerospace environment /
College degree in mechanical/aerospace engineering or related field, coupled with a minimum of three year
MRB experience or five years design experience in a Mechanical or an Aerospace environment

Requires good organizational, communication and interpersonal skills and command of the English language.

Must have a good knowledge of aircraft structure & system installation technical requirements.

Interior completion and Electrical & Systems experience would be an asset.

Requires an energetic person with a high sense of commitment, and willing to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Position is for second shift and/or weekend work requirements.

Previous CATIA, Design and MRB experience including support to production would be an asset.

***PLEASE NOTE: 3 day shift ; 2 Evening shift; 2 night Shift; 1 Weekend shift***
 
Job Number: 2604
Job Location: Canada
Rate: 56.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2605 - ENGINEERING PROFESSIONAL - ANDON - cv, word doc only

Description:
Review and approve change request pertaining to installation design activities.

Translate and apply design requirements into comprehensive design packages that meet Bombardier design practices and airworthiness regulatory requirements.

Required to provide estimates and statements of work for design related activities.

Assist in design review presentations and technical investigations.

Will also be asked to support suppliers, production and final line installations.

Produce detail and installation drawings of cabinet installation and systems installations.

Engineering degree in Aerospace or Mechanical Engineering or a Technical diploma with 3-5 years of related experience.

Knowledge of CATIA V5 is required.

Bilingual in English and French.

This position will require good integration skills when dealing with multi-discipline engineering groups and partners.

1 position day shift, 3 positions evening shift, 2 positions weekend shift, 2 positions night shift.

Knowledge of Catia V5 is required.

Previous experience with Global 7500 is a definite asset.

This position will require good integration skill when dealing with multi-discipline engineering groups and partners.

Support and define aircraft schedules is required.

Comfortable in unionized context.

Experience working in a Manufacturing environment in the aerospace industry is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.
 
Job Number: 2605
Job Location: Canada
Rate: 48.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2608 - CABIN ELEC. SYS. INTEGRATOR - cv, word doc only

Description:
Support production and troubleshoot cabin systems on aircraft when required, to minimize issues impact on customer and/or in production.

Document the issues in order to allow a fast resolution including the analysis of electrical schematics and technical requirements as well as the interaction with the different systems suppliers.

Integrate, test and troubleshoot cabin systems such as the Cabin Management, Entertainment, Camera, Lighting or Security.

Work with different functions to plan, organize and run system development tests.

Provide visibility daily to your supervisor on the progress of the testing, the production support and the issue encounter.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Support change requests made by the Production team as well as change proposals made by customers.

Prepare the required documents, such as technical specifications, block diagrams, functional test engineering requirements (FTER) and test definition sheets (TDS).

Manage, review and approve the deliverables of the Electrical System Suppliers.

Prepare systems definition documentation such as ESSDs and wiring diagram and certification documentation for cabin systems.

Some travel may be required to support production in Client sites outside of the city.

Electrical or software engineering bachelor degree and at least three (3) years of relevant experience in aircraft testing and troubleshooting;

**This position is also open to New Grads in Electrical Engineering**

Cabin systems experience is an asset,

Familiar with FAR 25 requirements and the qualification rules pertaining to avionics/electrical systems.

Working experience using XML, embedded system programming, SNMP, HTML 5 and personal electronic device application is an asset.

Working experience with IP addressing verification, network topology (including wireless LAN), troubleshooting network tools (e.g Wireshark), telephony (SIP), voice over ip (VOIP) and quality of service (QoS) is an asset.

Have experience in dealing with a supplier base.

Have a working experience using AutoCAD, ECAD, CATIA and MS Office.

Must be bilingual (English and French), both written and spoken.

Must be able to work under minimum supervision, enjoy teamwork and have project organization skills.

Must also demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Individuals having a previous experience in testing and integration of interior systems for business aircraft will be preferred.

Position is for evening or night or weekend shift with 3 day shift ; 1 Evening shift; 1 night Shift; 1 Weekend shift.
 
Job Number: 2608
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2609 - MECHANICAL SYSTEMS INTEGRATION COMPLETION - PRODUCTION SUPPORT - cv, word doc only

Description:
Act as the technical specialist for the systems

Receive, analyze and define solutions to meet customer and operation needs.

Collaborate with different internal parties (Operations, Detailed Design, Projects, Programs, Technical, etc.) as well as suppliers on daily basis.

Lead problem resolution by identifying the right stakeholders, establishing options, collecting facts, reaching alignment on the recommendation and bringing the recommendation for decision.

Produce and Review technical deliverables and datasets (3D models and 2D drawings) and ensure that they meet technical and Client requirements.

Be in direct contact with suppliers and be responsible for the delivery of quality engineering documentation that meets Client Standards.

Identify technical impacts and lead production line support change management processes.

College or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have technical experience in interior completion on Client Platform and knowledge of requirements for aircraft systems and interiors.

Understanding of product structure and aircraft configuration.

Have experience in working with Enovia / Enovia PLM

Ability to understand complex engineering issues and are innovative in problem solving.

Are well organized and are project oriented.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Good communication skills including good English writing skills, and good English and French verbal skills.

Demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.

1 day shift ; 1 Evening shift; 1 night Shift.
 
Job Number: 2609
Job Location: Canada
Rate: 57.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2610 - MATERIALS & PROCESSES ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.).

Engage in engineering development work.

Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports (including flammability).

Perform Trade and Design Studies.

Support various research and development projects.

Act as M&P expert.

Create, improve and adapt technical and functional processes.

Take on strategic projects management.

Plan, execute audits, prepare reports and follow up on corrective actions.

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Are familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Are familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Have knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Have practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Have practical knowledge and experience in aircraft structure and completion components.
 
Job Number: 2610
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 05/05/2020
Last Updated: 06/05/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
7 Stress Engineers - Liaison Repair Experience Required

Description:
7 Liaison Stress Engineers Needed
US PERSONS REQUIRED
Must haves:
• BS degree
• MRO/Repair background
• Airframe experience, specifically commercial and military (F-18 preferred) wings, structural components and thrust reversers.
Airframe Structural Analysis experience
Extensive Classical Analysis background required.
*NO FEA performed on this job - All classical Analysis methods.
Airframe analysis is in support of maintenance and repair of in-service aircraft parts and structures.
Must have good communication skills and must have ability to communicate and present findings to technical and non-technical people.
Engineer will identify the damage to the airframe or component that is outside of the aircraft manual and will need to use classical analysis methods to create a repair concept that will restore the airframe load path. Structures will be both composite and metallic.
MRB background a plus, but not mandatory.
*Candidates who can turn a wrench will fit well, even if it is working on their own cars OR a stress engineer who used to be an A&P mechanic, for example.

The Structures Company is an AA/EOE.
 
Job Number: 365
Job Location: OK
Rate: ***DOE***
Duration: ***DIRECT POSITION***
Start Date: ASAP
Input Date: 02/25/2020
Last Updated: 04/01/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

A&P Aircraft Mechanic

Description:
 PDS Tech is seeking an A&P Aircraft Mechanic in Trumbull, CT
 
* This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
 
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.
 
Assigned Duties
  • Work independently with limited supervision.
  • Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
  • Perform repair of detail components by filing, stoning, lapping and polishing.
  • Using power and hand tools for drilling, sanding and riveting.
  • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
  • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
  • Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
  • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
  • Chemically treat repaired surfaces in accordance with approved data.
  • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
  • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
  • Use hydraulic test equipment.
     

Experience Required 
  • High School Diploma or Equivalent required 
  • Aerospace Powerplant and/or Airframe license. 
  • Min. 2 yrs. experience in Aerospace Maintenance

 
Job Number: 1910106123
Job Location: Trumbull, CT
Duration: 18 months
Input Date: 01/14/2020
Last Updated: 06/05/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZGYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3042-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 10/9/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.


Qualifications and Education Requirements
C-130 OR UH-60 experience REQUIRED

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1

Qty 4 positions
Please make sure all candidates have EITHER C-130 OR UH-60 experience.
 
Job Number: JEG-3042-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months +
Input Date: 01/21/2020
Last Updated: 04/30/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 12/30/2019
Last Updated: 04/27/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 10/24/2019
Last Updated: 02/21/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight control experience required - no clearance URGENT SC

Description:
167510 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3126-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 8/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 or C-130 Experience is Strongly desired
Rigging of flight control experience required

Skills: Category Name Required Importance Experience
Areas of Expertise Hydraulics No 1 < 1 Year Areas of Expertise P-3 No 1 1 - 2 Years Qty 2 positions Must work 2nd shift.
 
Job Number: JEG-3126-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 03/05/2020
Last Updated: 03/17/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight controls required - no clearance URGENT SC

Description:
167509 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3128-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 Exp or C-130 Exp desired
Rigging of flight controls required

Skills: Category Name Required Importance Experience
Areas of Expertise Flight line Maintenance Yes 1 2 - 4 Years
Areas of Expertise P-3 No 2 2 - 4 Years

Qty 6 positions
 
Job Number: JEG-3128-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 02/03/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Composite Technician

Description:
Education and Experience Requirements:
High School graduate or GED.
Q stamp qualified in related composite assembly processes.
Must be able to use basic mathematical formulas to solve dimensional problems.
Good working knowledge of computers and related software.
Five (5) years of related experience in composite manufacturing processes.
Position Purpose:
Under little or no supervision, perform one or more of the following composite part manufacturing functions:
complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment.
Function as a team member and assist in providing technical direction to other team members.
Possess the ability to organize and perform new job tasks with a working knowledge of other parts and part numbers.
Establish priorities and assist in the development of work schedules.
Must be proficient at directing and monitoring the work of team members.
Willing to perform the job functions of a team leader in their absence.

Principle Duties and Responsibilities:
Essential Functions: 1. In a team oriented work environment, manufacture a wide variety of composite aircraft parts to meet manufacturing specifications. Possess the ability to perform close tolerance work.
2. Must demonstrate leadership ability and possess good communication skills.
3. Demonstrate ability to plan, organize, execute, and obtain objectives with minimal direction.
4. Demonstrate the ability to meet the requirements of the manufacturing competencies at the appropriate level in the Employee Effectiveness Review.
5. Proficient at reading work orders, blueprints, GAC specifications, lofts, sketches and operation sheets to determine sequence of operations.
6. Must be proficient in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper.
7. Check all work and ensure a defect free assembly prior to inspection.
8. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc.
9. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations.
10. Adapt to sudden schedule changes.
11. Coordinate with other disciplines concerning projects.
12. Support lean activities as required.
 
Job Number: 150173
Job Location: Tulsa, OK
Rate: $37/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 01/21/2020
Last Updated: 04/17/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB Catia - Clearance CA

Description:
167092 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2653-1
Max Pay Rate: $91.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.

Will be responsible for providing dispositions to non-conforming material documents. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.

Desired skills
• Good technical, communication, team, and presentation skills.
• Previous Material Review Board (MRB) Authority.
• Major in CE, ME, or AE preferred.
• Desired skills CATIA 3D Modeling.
• GD&T understanding.
• Composite repair.
• Final finish/spec tech familiarity.
• Interchangeability requirements knowledge.
• QADs/ DIMS/ related software experience.
• Some weekend, odd shift and holiday work may be required.

Qty 1 position
 
Job Number: JE-2653-1S
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 02/24/2020
Last Updated: 04/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / flight test - Clearance CA

Description:
167101 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2685-1
Max Pay Rate: $91.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Flight Test Engineering tasking across multiple ADP programs. On some programs will be the sole voice representing flight test Full spectrum of tasking from proposal development through post flight test reporting.

Will be required to customize test processes to individual customers and circumstances. Assess prototype aircraft operations for risk and assist in develop appropriate mitigating procedures.
During flight phase will be the primary individual for controlling test execution, configuration management, troubleshooting, and asset scheduling. Travel, overtime, odd shifts, and weekend work may be required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
- Flight Test execution experience
- Experience with authoring flight test documentation
- Configuration management experience
- Presentation experience to company and customer audiences
- Experience interfacing with all levels of customer management

Desired skills
-Developmental test program experience
-Test project lead or ship lead experience
-Mission Test Director experience
-Proposal development experience
-Must be willing to mentor junior-level team members


Qty 1 position
 
Job Number: JE-2685-1TS
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/11/2019
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Air Systems

Description:
We are currently looking for an experienced Air System Engineer to fill an opening with an aerospace company in Renton, WA. Interested candidate should have strong knowledge of flight test operations and flight certification, including a familiarity with aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.

Responsibilities of the Air Systems Engineer
Support Flight Testing Activities, including reviewing test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings.
Participate in Test Readiness Reviews and ensure on-time engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions and Aircraft Troubleshooting.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.

Requirements
Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Solid leadership skills as well as people management skills.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Excellent communication skills (oral, written, presentation) with both external and internal team.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Comfortable and effective working in Microsoft Office and the ability to quickly learn new software and systems.
 
Job Location: Renton, WA
Input Date: 04/28/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 01/23/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Design Support Engineers

    Description:
    Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
     
    Job Number: 0207
    Job Location: Baltimore, MD
    Rate: $70-$80 DOE
    Per Diem: yes-split
    Overtime: Possible
    Duration: 6 mos+
    Start Date: ASAP
    Input Date: 02/07/2020
    Firm Name: HI-TEK PROFESSIONALS INC
    Attention: Greg Ambrose
    Address: 103 CHESLEY DR STE 207
    City, State: MEDIA, PA 19063
    Phone: 610/534-8701
    800 Phone: 877/271-1799
    Fax Phone: 610/534-8697
    Website: www.hitekprofessionals.com

    Aircraft Interiors Design Engineer - Solidworks

    Description:
    Position Summary:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes.

    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience in Solidworks

    The Structures Company is an AA/EOE.
     
    Job Location: Indianapolis, IN
    Rate: $50-57/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 05/16/2020
    Last Updated: 06/05/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: chrissheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter - no clearance SC

    Description:
    167536 Job Title: Aircraft Painter

    Work Site Address: Greenville, SC 29605
    Job Number: 3199-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/24/2020
    End Date: 8/28/2020
    Position Type: Contract

    Job Summary:
    Coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper. Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Paint Process No 1

    Qty 1 position
     
    Job Number: JEG-3199-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 6 months
    Input Date: 02/03/2020
    Last Updated: 02/19/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 12/30/2019
    Last Updated: 03/20/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Aircraft Systems Engineers -- Many new long term programs in Missouri

    Description:
    Systems Engineers with avionics or software; DOORS or Rhapsody needed

    PDS Tech - #1 Aerospace supplier in Missouri
     
    Job Location: Missouri
    Input Date: 02/12/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy or Ken Brownsher
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Structural Analysis Engineer - For Military Aircraft

    Description:
    Develops and provides engineering solutions for the overhaul and repair of large transport aircraft structural components, requiring a sound knowledge of the principles, theories, and concepts that are consistent with Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) regulations. Technical foundation to perform approvals of single and multi-use repair packages, and manage product center workflow and schedules,. Manage projects and special assignments with little to no supervision. May function as a team lead for less experienced engineers.

    Essential Functions and Key Responsibilities:

    Reviews damage reports to develop repair schemes, authors work instructions, and performs the stress analysis and substantiation supporting the repair with no supervision. Repair development and substantiation will include a variety of analysis methods and require an established knowledge of mechanically fastened metallic structure, adhesively bonded metallic structure, composite structure, welding, and brazing. Developed repairs must be substantiated to meet or exceed the original design certification requirements.

    Established knowledge of, and ability to apply repair analysis techniques such as Boeing Structures I and II, ABARIS/Laminate Plate Theory, Bruhn, Flabel, ETC. Develops and substantiates complex repair schemes with no supervision.

    Working knowledge of FAA and EASA regulations, AD’s, NPRM’s, AC’s, AMC’s, SDR’s, EWIS, etc. Other aviation authority knowledge such as CAAC/JAA/JCAB is a plus.

    Performs technical review and approval of less experienced engineer’s repair packages.



    Must have:
    • MUST BE US PERSONS
    • BS degree
    • Airframe Structural Analysis experience
    • Extensive Classical Analysis background required (Bruhn method as an example). *NO FEA performed on this job. All classical Analysis methods.
    • Airframe analysis in support of maintenance and repair of in-service aircraft parts and structures experience, specifically commercial and military (F-18 preferred) wings, structural components and thrust reversers.
    • Must have good communication skills and must have ability to communicate and present findings to technical and non-technical people.
    • They will identify the damage to the airframe, or component that is outside of the aircraft manual and will need to use classical analysis methods to create a repair concept that will restore the airframes load path. Structure will be both composite and metallic.
    • MRB background would be a plus, but not mandatory.



    The Structures Company is an AA/EOE.
     
    Job Number: 368
    Job Location: OK
    Rate: $100-$1115K **DOE**
    Duration: **DIRECT OR CONTRACT TO HIRE**
    Start Date: ASAP
    Input Date: 03/10/2020
    Last Updated: 04/29/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic TEST Technician / MUST have C-130J testing experience - no clearance URGENT SC

    Description:
    167551 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3198-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/24/2020
    End Date: 2/24/2021
    Position Type: Contract

    Job Summary:
    This position is for an Avionic TEST Technician:
    Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft.

    Essential Functions (Other duties may be assigned as required)
    • Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
    • Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
    • Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.

    Qualifications and Education Requirements
    MUST have C-130J testing experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130J Yes 1

    Qty 1 position
     
    Job Number: JEG-3198-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 03/04/2020
    Last Updated: 04/13/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - 2nd shift / C-130 required aircraft modification experience require / no clearance SC

    Description:
    167551 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3235-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/17/2020
    End Date: 2/17/2021
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electro-mechanical, and/or optical areas. Installs wire harness on aircraft, to include clamping, tying and terminating. Performs continuity checks.

    Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.

    Qualifications and Education Requirements
    Modification experience required
    C-130 experience required
    Modification installation experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130 Yes 1 4 - 6 Years

    Qty 1 position
    This is a full time 2nd shift position.
     
    Job Number: JEG-3235-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 02/03/2020
    Last Updated: 03/02/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    167249 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2948-1
    Max Pay Rate: $29.00/hr
    Start Date: 1/16/2020
    End Date: 8/14/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
    Installs wire harnesses in aircraft to include routing and termination.

    Qualifications and Education Requirements
    Modification experience STRONGLY desired
    Must have previous aircraft modification experience.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification Yes 1
    Areas of Expertise C-130 No 1

    Qty 10 positions
    Contract length likely to extend
    MORE RESUMES NEEDED
    Modification experience STRONGLY desired

    Manager motivated to make selections quickly
     
    Job Number: JEG-2948-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months plus extension
    Input Date: 02/10/2020
    Last Updated: 04/01/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    166688 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2464-1
    Max Pay Rate: $29.50/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

    Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 1 2 - 4 Years
    Areas of Expertise C-130H No 1 2 - 4 Years

    Qty 8 positions
    This is an URGENT request.
     
    Job Number: JEG-2464-1
    Job Location: Greenville, SC
    Rate: 29.50/hr max
    Duration: 8 months plus extension
    Input Date: 01/13/2020
    Last Updated: 03/04/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / Aircraft MODIFICATION experience REQUIRED - no clearance URGENT SC

    Description:
    167479 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3125-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/10/2020
    End Date: 7/10/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Qualifications and Education Requirements
    Aircraft MODIFICATION experience REQUIRED
    P-3 experience a plus but not required

    Skills: Category Name Required Importance Experience
    Areas of Expertise P-3 No 1 1 - 2 Years

    Qty 4 positions
     
    Job Number: JEG-3125-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 5 months +
    Input Date: 04/29/2020
    Last Updated: 05/01/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 06/12/2018
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Bleed Air Systems Design Engineer - 2 Openings

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
    college or university program
    2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
    3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software
    Must Haves:
    Engine Bleed air design experience
    Part 23/25 aircraft experience
    Catia V5 3D/2D experience
    Degree preferred


    The Structures Company is an AA/EOE.
     
    Job Number: 369
    Job Location: NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 03/11/2020
    Last Updated: 04/08/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 01/08/2020
    Last Updated: 03/20/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    Preferred Skills:
    - Previous executive jet cabin engineering experience
    - Knowledge of configuration management
    - Aircraft certification
    - CATIA V5
    - SmarTeam
     
    Job Number: 20-150865
    Job Location: GA
    Rate: $60.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 02/11/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Preferred Skills:
    1. Previous executive jet cabin engineering experience.
    2. Knowledge of configuration management.
    3. Aircraft certification
    4. CATIA V5
    5. Smarteam

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12141
    Job Location: Savannah, GA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/27/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • Previous executive jet cabin engineering experience
    • Knowledge of configuration management
    • Aircraft certification
    • CATIA V5
    • SmarTeam

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-388
    Job Location: Savannah, GA
    Rate: $50-$60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 01/27/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Contract Administration Spec 2

    Description:
    PDS Tech Inc is seeking a Contract Administration Specialist in Hazelwood, MO

    Primary Responsibilities include:
    • RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
    • As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
    • Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
    • Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
    • Submits offers and serves as official representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
    • Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
    • This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.


     
    Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 3 or more years' related work experience.
     
    Job Number: 2010110492
    Job Location: Hazelwood, MO
    Duration: 11 months
    Input Date: 12/31/2019
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Patrick Mahoney
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    800 Phone: 866/224-2745
    Email: cecjdallasav@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fdpAQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DER Avionics Engineer

    Description:
    General Summary:
    The DER Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

    Duties and Responsibilities:
    • Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
    • Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems.
    • Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
    • Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
    • Perform system evaluation and analysis to verify the system design compliance with functional requirements.
    • Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
    • Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
    • Conduct system lab testing and aircraft functional testing.
    • Prepare presentations on avionics system design/development status.
    • Support system analyses for avionic systems.

    The Structures Company is an AA/EOE.
     
    Job Number: 361
    Job Location: NC
    Rate: Up to $150K **DOE**
    Duration: DIRECT POSITION
    Start Date: ASAP
    Input Date: 01/23/2020
    Last Updated: 02/25/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DaDT Stress Analysis Engineer

    Description:
    Seeking a first-rate aerospace Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing as well as strong proven Fatigue and Damage Tolerance experience. The stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into product lifecycle manager.

    Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

    Your Mission

    Responsibilities:
    • Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
    • Develops standardized analysis criteria and templates
    • Plays an integral role in the work flow release process for all structural designs
    • Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
    • Supports the creation of structural test plans which will be used to verify manufacturing

    What You Bring
    Basic Qualifications

    • Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
    • Strong knowledge and understanding of Durability and Damage Tolerance Analysis on both Metallic and Composites components.
    • Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
    • Minimum 7 years of applicable experience in the analysis of structural systems using strength of materials, finite element based methods and DaDT analysis.
    • Experience with free-body diagrams and strong understanding of Solids Mechanics and Fracture Mechanics as well as classical stress analysis techniques
    • Excellent verbal and written communication skills
    • Excellent organizational and problem-solving skills
    • Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    • Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

    Preferred Skills and Experience
    • Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
    • Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    • Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    • Experience with manufacturing-based ERP systems, such as Oracle, is a plus

    The Structures Company is an AA/EOE.
     
    Job Number: 367
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 02/25/2020
    Last Updated: 03/05/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Deceleration Engineer

    Description:
    ****MUST be a U.S. Citizen without Dual Citizenship****

    Duties:
    Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

    The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

    Essential Job Functions (Including % of Time for Each):
    50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
    15% - Parachute Design and Loads Analysis.
    40% - Parachute/Extraction System Modeling and Simulation updates.
    35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
    10% - Oversee field installation and testing of Parachute design.

    Skills:
    REQUIRED:
    1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
    2. B.S. in Aerospace, Mechanical, or equivalent degree.
    3. Prior experience with 6DOF simulation of deceleration systems.
    4. Prior experience with Computational Fluid Dynamics (CFD) software.
    5. Ability to program and use MATLAB/Simulink.
    6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

    DESIRED:
    1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
    2. Experience working with deceleration systems.
    3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
    4. Working knowledge of aircraft/missile dynamics and control.
    5. Experience with air drops from military aircraft.
    6. Active DoD Secret Clearance.
     
    Job Number: 12119
    Job Location: Orlando, FL
    Rate: $38.50/HR
    Per Diem: N/A
    Overtime: Possible
    Duration: Direct Hire
    Start Date: ASAP
    Input Date: 05/28/2020
    Last Updated: 05/28/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Delegated Organization Process Specialist

    Description:
    We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

    Responsibilities of the Delegated Organization Process Specialist
    Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
    Propose and execute on process improvement opportunities.
    Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
    Educate impacted parties on system changes and upgrades.
    Support changes to JCAB requirements to facilitate all system improvements.


    Requirements of the Delegated Organization Process Specialist

    10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
    Significant experience with process development/improvement
    Strong knowledge of global certification requirements and compliance standards.
    Experience interfacing with regulators to support certification activities.
    Fluent in English, with Japanese language capabilities a bonus.
    Previous experience in as an aviation authority employee or delegate is beneficial.
     
    Job Location: Japan
    Start Date: ASAP
    Input Date: 01/30/2020
    Last Updated: 04/02/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11964
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/13/2019
    Last Updated: 03/06/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 11965
    Job Location: Savannah, GA
    Rate: $55.00 - $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/13/2019
    Last Updated: 03/06/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer - Completions Aircraft Interiors

    Description:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    Design Engineer will be required to liaison with the shop on engineering issues.
    Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 148594
    Job Location: Savannah, GA
    Rate: $55/hr to $58/hr
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 02/24/2020
    Last Updated: 03/11/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer - Solidworks

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: Indianapolis, IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 05/01/2020
    Last Updated: 05/09/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer - Wing and Engine Anti-Ice

    Description:
    General Summary:
    The Contingent Designer Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
    2. Prepare 3D installation arid detail models of the Wing and Engine Anti-ice Systems.
    3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.


    Education, Work Experience, Certification and/or Licensure:
    5. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.
    Must Haves:
    Aircraft anti-ice design experience
    Part 23/25 aircraft experience
    Catia V5 3D/2D experience
    Degree preferred


    The Structures Company is an AA/EOE.
     
    Job Number: 370
    Job Location: NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 02/26/2020
    Last Updated: 02/27/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer 5

    Description:
    Design and Analysis Engineer 5

    Location: Oklahoma City, OK
    Duration: 6+ Months

    Description:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


    Other job responsibilities may include:
    - Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    - Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    - Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    - Works with other to develop program test strategies.
    - Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    - Conducts program independent reviews and reports results to program leadership.
    - Provides critical support of fielded hardware and software over the entire product lifecycle.
    - Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    - Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    - Works under consultative mentorship.

    Basic Qualifications (Required Skills and Experience)
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


    Skill Code: 622-Electrical Systems Design
     
    Job Location: Oklahoma City, OK
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 11/15/2019
    Last Updated: 03/02/2020
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 02/11/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 02/11/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Designer - AutoCAD and Inventor

    Description:
    • Prepare and revise technical drawings for aircraft interior components and cabin layouts using Autocad 2010 and later (2D) and Autocad Inventor (3D)
    • Prepare technical component drawings, applying GD&T as well as developing BOM’s.
     
    Job Number: 20-839
    Job Location: Midwest
    Overtime: Possible
    Duration: 6 months +
    Start Date: ASAP
    Input Date: 02/28/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Capitol Logic & Harness XC

    Description:
    Unique Skills:
    1. Mentor Graphics Capitol Logic and Harness XC experience required.
    2. Catia V5 experience preferred.
    3. 14 CFR 25 Subpart H - EWIS based design experience required.
    4. Completions electrical system design experience preferred.
    5. Part 25 Certification experience for cabin interiors preferred.
    6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    7. Experience with power distribution, lighting, switching, and harness routing required.
    8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    9. Familiarity with aircraft STC procedures preferred.
    10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
    11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11995
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/19/2019
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 20-150866
    Job Location: Savannah, GA
    Per Diem: Split
    Overtime: Possible
    Duration: $60-$65 per hour
    Start Date: ASAP
    Input Date: 02/11/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Unique Skills:

    Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 131981
    Job Location: Savannah,, GA
    Input Date: 02/11/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin communication, security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Catia V5 basic navigation experience.
    • Company electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-387
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.


    Education and Experience Requirements:

    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: GA
    Rate: $60.60
    Per Diem: Possible
    Overtime: Possible
    Start Date: Long Term
    Input Date: 03/11/2020
    Last Updated: 05/08/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication, security and entertainment systems.
    3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12142
    Job Location: Savannah, GA
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/27/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Quality Engineer

    Description:
    - Analyze electrical designs created in AutoCAD and Capital Harness
    - Clearly document quality findings to design team and collaborate on issue resolution
    - Analyze electrical harness routing created using CATIA V5 EHI

    The ideal candidate will have experience in the following:
    - General CATIA V5 experience is required
    - Electrical Engineering degree strongly preferred
    - EWIS experience strongly preferred
    - Aircraft interiors electrical engineering design and/or quality experience is preferred
    - Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred
    - Experience with systems development, layout, logic, and wiring diagram creation is preferred
    - Experience with power distribution, lighting, switching, wire sizing and routing is preferred
     
    Job Number: 149042
    Job Location: Savannah, GA
    Rate: $58/hr to $63/hr
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/17/2020
    Last Updated: 04/06/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Quality Engineer

    Description:
    Unique Skills:
    1. Candidate will be performing quality checks on electrical designs in support of our client's Completions.
    2. At a minimum, the candidate will:
    a. Analyze electrical designs created in AutoCAD and Capital Harness.
    b. Clearly document quality findings to design team and collaborate on issue resolution.
    c. Analyze electrical harness routing created using CATIA V5 EHI.

    The ideal candidate will have experience in the following:
    1. General CATIA V5 experience is required.
    2. Electrical Engineering degree strongly preferred.
    3. EWIS experience strongly preferred.
    4. Aircraft interiors electrical engineering design and/or quality experience is preferred.
    5. Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred.
    6. Experience with systems development, layout, logic, and wiring diagram creation is preferred.
    7. Experience with power distribution, lighting, switching, wire sizing and routing is preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11997
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/19/2019
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    As part of the Completions Engineering Electrical Definition Team:
    • Define and create Build Lists of interior components for aircraft
    • Evaluate customization requests for engineering and manufacturing feasibility
    • Analyze models to determine asset re-use or new custom engineering requirements
    • Support evaluation and determination of certification strategy of aircraft
    • Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    • CATIA V5 / SmarTeam preferred
    • Experience using CHS/EHI tools a plus

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-375
    Job Location: Savannah, GA
    Rate: $72-$77/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12014
    Job Location: Savannah, GA
    Rate: $53.17 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    As part of the Completions Engineering Electrical Definition Team:
    1. Define and create Build Lists of interior components for G500 / G600 aircraft
    2. Evaluate customization requests for engineering and manufacturing feasibility
    3. Analyze models to determine asset re-use or new custom engineering requirements
    4. Support evaluation and determination of certification strategy of aircraft
    5. Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    6. CATIA V5 / SmarTeam preferred
    7. Experience using CHS/EHI tools a plus

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12015
    Job Location: Savannah, GA
    Rate: $71.43 - $76.98/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12016
    Job Location: Savannah, GA
    Rate: $59.52 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-377
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-376
    Job Location: Savannah, GA
    Rate: $55-$60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Required Skills:
    AutoCad, Capitol Harness &/or Mentorgraphics required
    Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    Experience with power distribution, lighting, switching, wire sizing and routing.
    Experience with systems development, layout, logic and wiring diagram creation.
    Familiarity in mechanical system design.
    Analyze Electrical designs in 3D models
    Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    Catia V5 basic navigation experience.
    GV, GVI, & GVII electrical system design experience.
    14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    EWIS Certification familiarity & experience preferred.
    Familiarity with aircraft STC procedures preferred.
    Experience with electrical systems test plans and reports.


    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 148781
    Job Location: Savannah, GA
    Rate: $59/hr to $65/hr
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/17/2020
    Last Updated: 04/17/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electrical Engineer - Completions

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    Required Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

    Preferred candidate will have:
    • Catia V5 basic navigation experience.
    • GV, GVI, & GVII electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 374363
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 01/06/2020
    Last Updated: 05/27/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Data Processing Engineer - Clearance CA

    Description:
    167091 Job Title: Electrical Engineer / Data Processing Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2677-1
    Max Pay Rate: $90.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
    The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

    Tasks include:
    • Receive, process and troubleshoot IRIG 106 formatted data products per established processes
    • Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
    • Diagnosis and resolution of problems encountered in the recovery of test data
    • Support IT assignments as required

    At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Desired skills
    The ideal candidate possesses:
    • Experience with IT infrastructure operations, computer networking, and/or software programming concepts
    • Experience in data processing and network system administration
    • Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
    • Programming in C/C++
    • Certification
    • Subject Matter Expert in data collection systems
    • Experience working with the application Common Data Processing
    • Experience with installation of Network Server systems for data processing
    • Experience working in flight test
    • Hardware and/or software programming experience
    • Understanding of IRIG 106
    • Experience with various instrumentation vendors hardware and software
    • Symvionics IADS (Interactive Analysis and Display System) use and programming
    • Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
    • Demonstrated ability to develop and implement process improvement initiatives
    • Excellent communication skills
    • Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

    Qty 1 position

    This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
     
    Job Number: JE-2677-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/17/2019
    Last Updated: 04/23/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167083 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2678-1
    Max Pay Rate: $100.00/hr
    Start Date: 11/22/2019
    End Date: 2/9/2021
    Position Type: Contract

    Job Summary:
    Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

    Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

    The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

    This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Basic Qualifications
    • Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
    • Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
    • Experience developing data acquisition systems for air vehicles

    Experience with the following:
    - Microsoft Office
    - Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

    Desired skills
    • Using various CAD programs such as Catia, Autocad, etc.
    • Using general test equipment such as oscilloscopes and spectrum analyzers.
    • Understanding of IRIG 106
    • Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
    • GPS and IRIG time standards
    • Video protocols and compression

    The applicant must have excellent organizational and communications skills
    • Applicant should have knowledge of Systems Engineering practices and concepts
    • Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
    • Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
    • Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

    Qty 2 positions
     
    Job Number: JE-2678-1S
    Job Location: Palmdale, CA
    Rate: 100/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/19/2019
    Last Updated: 04/23/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167093 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2657-1
    Max Pay Rate: $90.00/hr M
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Responsible for performing pre-flight of aircraft instrumentation.

    Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    - Analog and digital circuit design and analysis.
    - Signal conditioning, transducers, and data acquisition.
    - Ability to interpret electrical drawings.
    - Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
    - Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
    - CATIA, CCD, AutoCAD or similar design tools.
    - Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
    - Microprocessor firmware design and embedded system design
    - Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
    - Flight test instrumentation protocols and standards
    - GPS and IRIG time standards
    - Real time and post test data processing Flight Test Experience
    - Proficient communication skills

    Qty 2 positions
     
    Job Number: JE-2657-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/17/2019
    Last Updated: 02/28/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Design - Completions

    Description:
    1) Electrical Harness Installation (EHI) design experience required.
    2) Catia V5 experience required.
    3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4) 14 CFR 25 Subpart H - EWIS based design experience required.
    5) Completions electrical system design experience preferred.
    6) Part 25 Certification experience for cabin interiors preferred.
    7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8) Experience with power distribution, lighting, switching, and harness routing required.
    9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10) Familiarity with aircraft STC procedures preferred.
    11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


    Education and Experience Requirements:

    1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-369
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 01/23/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Design Engineer

    Description:
    Unique Skills:
    1. Electrical Harness Installation (EHI) design experience required.
    2. Catia V5 experience required.
    3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4. 14 CFR 25 Subpart H - EWIS based design experience required.
    5. Completions electrical system design experience preferred.
    6. Part 25 Certification experience for cabin interiors preferred.
    7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8. Experience with power distribution, lighting, switching, and harness routing required.
    9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10. Familiarity with aircraft STC procedures preferred.
    11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11994
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/19/2019
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Design Engineer-Completions

    Description:
    1) Electrical Harness Installation (EHI) design experience required.
    2) Catia V5 experience required.
    3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4) 14 CFR 25 Subpart H - EWIS based design experience required. 5) Completions electrical system design experience preferred. 6) Part 25 Certification experience for cabin interiors preferred.
    7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8) Experience with power distribution, lighting, switching, and harness routing required.
    9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10) Familiarity with aircraft STC procedures preferred. 11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 149203
    Job Location: Savannah, GA
    Rate: $58/hr to $63/hr
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/17/2020
    Last Updated: 04/17/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Integration Engineer

    Description:
    POSITION SUMMARY:
    The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Provide engineering design and analysis of electrical systems and components.
    2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
    3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
    4. Work experience with EWIS standard design and wire separation requirements.
    5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
    6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
    7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
    9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
    10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
    11. Develops and implements engineering modifications and retrofits to completions in progress.
    12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
    13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    14. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
    2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with SolidWorks.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
    4. Aviation background and experience with electrical systems.
    5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
    6. Strong knowledge of industry electrical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
    9. Requires reasoning/analytical skills to creatively design and problem solve.
    10. Strong communication and problem-solving skills.
    11. Strong time-management and organizational skills.




    The Structures Company is an AA/EOE.
     
    Job Number: 347
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 04/11/2020
    Last Updated: 05/08/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Avionics Engineer

    Description:
    Position Summary:

    Design complex, standard or custom, electrical and avionics integration installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

    This assignment is expected to be approximately 12-18 months in duration.

    Primary Responsibilities:

    Detail Design: 50%
    Create detail/assembly/installation wiring diagrams and power distribution schematics for new helicopter completions and STC projects.
    Review and facilitate engineering package release.
    Works with groups of engineers to complete projects.
    Works under general supervision from the Engineering Manager
    Follows established procedures
    Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
    Project Coordination: 20%
    Coordinates essential information into the configuration management system listing electrical and avionics installations for each aircraft unit produced by AHI
    Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
    Engineering Support: 20%
    Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
    Act as liaison to manufacturing and production efforts as needed.
    Support installation, functional and operational tests, and ground and flight tests.
    Structural Substantiation: 10%
    Performs preliminary electrical load analysis in support of initial layout and design concept.
    Additional Responsibilities:

    Other duties as assigned.
    Qualified Experience / Skills / Training:

    Education:

    Required:

    Bachelor's degree in Aeronautical or Electrical Engineering from an accredited college/university or equivalent experience
    Experience:

    Required:

    Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
    Preferred:

    Minimum one (1) year of helicopter design and integration.
    Licensure/Certifications:

    Required:

    NA
    Preferred:

    N/A
    Knowledge, Skills, Demonstrated Capabilities:

    Required:

    Knowledge of aviation/aerospace electrical design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
    Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

    Must be able to communicate effectively in the English language (verbal and written).
    Conversational French and/or German is a plus.
    Technical Systems Proficiency:

    Must be proficient with Microsoft Office Suite programs.
    Familiarity with AutoCAD and SAP programs
    Travel Required:

    5%
    Minimal domestic and International travel is required.
    Citizenship:

    US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
     
    Job Location: TX
    Input Date: 02/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Tracey Hill
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Fax Phone: 817/545-2006
    Website: www.jsginc.com

    Electronics Technician

    Description:
    PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

    In your role, you will:
    • Assemble fabricated aircraft parts at floor stations.
    • Assemble electrical or electronic systems and support structures.
    • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
    • Hand solder components under a microscope.  Fine pitch soldering experience is required.
    • Use hand tools and work instructions to assemble units according to product specifications.
    • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

    For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
    Qualifications:
    • Fine pitch soldering experience is required. (watch maker certifications)
    • 4 years experience in electronics assembly.
    • High School Diploma required.
    • Associates degree in Electronics or Engineering Technology desired.

    Desired Certifications:

    • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
    • IPC-7711/7721: Rework and Repair of Electronic Assemblies
    • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

    Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

    Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
     
     
    Job Number: 1810083538
    Job Location: Clearwater, FL
    Per Diem: No
    Duration: 12 months
    Input Date: 12/04/2019
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Clearance GA

    Description:
    2884-1 Embedded S/W Engineer
    Work Location: Marietta, GA
    Status: Open

    Qty: 1
    Desired Start Date: 1/29/2020
    End Date: 1/19/2021

    Job Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

    Required
    - Experience in the use of Windows and Unix Operating Systems.
    - 4+ years experience of software development in high order languages (C++, Java and/or Ada).
    - Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

    Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
    Pay Rate: $72.00 Hourly
     
    Job Number: JE-2884-1S6
    Job Location: Marietta, GA
    Rate: 72/hr max
    Per Diem: pd split possible
    Duration: 1 year plus extension
    Input Date: 01/07/2020
    Last Updated: 04/01/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Engineer – Aircraft Structural Modification Support

    Description:
    PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

    Aircraft Structural Modification Support
    2. Background/Need
    Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
    3. Position Scope/Job Functions
    Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
    4. Skills: Required
    - Direct program management experience of significant aircraft structural modifications
    - Experience with sensor and or mission system integration to turbine powered aircraft
    - Experience in the design and conduct of flight test programs for certification of major modifications
    - Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    - Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    - Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    - Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    - Familiarity with Configuration management tools and processes
    - Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    - Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    - Familiarity with Federal Acquisition Regulations
    5. Skills: Preferred
    - Experience with FAA certification of modifications designed to carry external stores on
    commercial aircraft
    - Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
    desired
    - Airframe and Powerplant License
    - Designated Engineering Representative (DER) with a Structures and Electrical rating
    - Designated Airworthiness Representative (DAR) rating is desired
    - Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
    towards a common goal
    6. Education/Professional Certifications
    MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
    experience
    7. Laboratory-furnished equipment and information
    Office space and a Laboratory desktop computer will be supplied.
    8. Place of Performance
    Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
    1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
    and Canada) is required. Anticipate approximately 50% travel to vendor locations.
    9. Period of Performance (PoP)
    Three (3) year period of performance is required.
    10. Security
    All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
    Interim Secret security clearance before receiving facility access.
    Will the performance of work require access to classified information? YES
    What level of clearance is required? SECRET

    Education requirements:
     
    • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

     
    Required Qualifications:
     
    • Direct program management experience of significant aircraft structural modifications
    • Experience with sensor and or mission system integration to turbine powered aircraft
    • Experience in the design and conduct of flight test programs for certification of major modifications
    • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    • Familiarity with Configuration management tools and processes
    • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    • Familiarity with Federal Acquisition Regulations
    • U.S. Citizenship required
    • Ability to obtain and maintain a security clearance

     
    Desired Qualifications:
     
    • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
    • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

    Airframe and Powerplant License

    • Designated Engineering Representative (DER) with a Structures and Electrical rating
    • Designated Airworthiness Representative (DAR) rating is desired
    • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

    Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

     
     
    Job Number: 1910104407
    Job Location: Bedford, MA
    Duration: 36 months
    Input Date: 07/17/2019
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue & Damage Tolerance Engineers Needed

    Description:
    3 Fatigue and DaDT Engineers Needed. MUST BE US PERSONS.
    Target Rate: $80-85/hr but could pay more for the right candidates.
    Must have composites experience.

    -Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline
    -Strong knowledge and understanding of Durability and Damage Tolerance Analysis on both Metallic and Composites components.
    -Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
    -Minimum 7 years of applicable experience in the analysis of structural systems using strength of materials, finite element based methods and DaDT analysis.
    -Experience with free-body diagrams and strong understanding of Solids Mechanics and Fracture Mechanics as well as classical stress analysis techniques
    -Excellent verbal and written communication skills
    -Excellent organizational and problem-solving skills
    -Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    -Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

    Preferred Skills and Experience
    -Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
    -Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    -Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    -Experience with manufacturing-based ERP systems, such as Oracle, is a plus

    The Structures Company LLC is an AA/EOE
     
    Job Location: Mojave, CA
    Rate: $80-85/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 03/11/2020
    Last Updated: 05/09/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Law Team Leader

    Description:
    We are seeking a seasoned Flight Control Engineering with successful leadership experience to fill a lead role for an aerospace company located in Nagoya, Japan. Interested candidates should have over 10 years of flight control/dynamics experience as well as senior aerospace program leadership skills.

    Responsibilities of the Flight Control Law Team Leader

    Manage the team with specialized technical background and knowledge regarding Control Laws Design, Verification and Certification.
    Planning, managing and controlling of Control Law design related activities, Desktop Simulations related activities, Manned Simulations related activities, Flight Test related activities, Validation and Verification related activities, including interaction with the pilot community.
    Support to integration activities with other areas of the organization including Flight Control Systems, Aeroelastics and Loads.
    Preparation of documentation to support Certification and if requested, coordination with authorities (JCAB, EASA, FAA).
    Support to Auto-Land and Auto-Pilot Systems and/or activities related to other derivative aircrafts.

    Requirements of the Flight Control Law Team Leader

    15 plus years of aircraft Flight Control and Flight Dynamics experience.
    Previous Leadership experience required.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    Excellent verbal and written communication skills in English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 01/30/2020
    Last Updated: 04/02/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer - Clearance CA

    Description:
    Engineering - Flight Controls Engineer

    Work Location: Edwards AFB
    Status: Open
    Qty: 1
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    Support Flight Sciences testing for the F22 Raptor. Provide on-site support for F22 flight test at Edwards AFB, CA. Monitor loads, flying quality, propulsion, utility, and subsystems. Monitor aircraft in the control room to verify safe flight test operations. Verify Instrumentation is working correctly in support of flight test missions. Collect and review flight test data. Support ground testing of various F22 components such as external stores pylon calibrations. Write documentation describing flight and ground test results. A BS degree in Engineer is required (prefer Aeronautical Engineering) with five to eight years of one of the specific loads, flying quality, propulsion, utility, and subsystems areas. The applicant must be able to attain specific program accesses for performing this job.

    - Aircraft flight test knowledge.
    - Flight Sciences background (Structures, Propulsion, Flying Qualities or Utilities & Subsystems.
    - Data analysis skills.
    - Computer skills to include MS Excel, Word, and MATLAB.
    - Familiar with Edwards AFB flight operations.
    - Familiar with Air Force Test Center processes.
    - Ability to interface with management personnel & team members.
    - Flight test experience.

    Work Location: Palmdale, CA
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $85.00 Hourly

    Work Schedule: 9/80-A
     
    Job Number: JE-2656-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/10/2019
    Last Updated: 02/28/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

    Description:
    166860 Job Title: Flight Controls Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2648-1
    Max Pay Rate: $85.00/hr
    Start Date: 12/2/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

    This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
    (1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
    (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
    (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
    (4) coordinate as required with other organizations associated with test readiness.

    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.

    Desired Skills
    (F-16 experience is highly preferred / F-22 & F35 experience desired)
    Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired.
    -Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


    Qty 4 positions

    Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
    Work location is Edwards AFB
     
    Job Number: JE-2648-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/27/2019
    Last Updated: 05/01/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Flight Engineer 4

    Description:
    PDS Tech, Inc. is seeking a Flight Engineer in Ridley Park, PA.

    Summary:

    • Performs systems checks on the ground and in-flight for functional check flights.
    • Evaluates payload, fuel requirements and assists Pilots with mission management.
    • Instructs personnel in function test procedures and Crew Chief duties/responsibilities.
    • Will function primarily as a subject matter expert of Japanese Crew Chief training and country specific aircraft training.
    • Will assist with additional unit level training requirements.
    • One year assignment with potential of two year.

    Required:
    • Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+8 years' related work experience, 14 years' related work experience, etc.).

     
    Job Number: 2010111689
    Job Location: Ridley Park, PA
    Duration: 12 months
    Input Date: 01/31/2020
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fjTuQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations / URGENT - Clearance MD

    Description:
    Flight Operations
    Work Location: Patuxent River, MD - RMS
    Status: Open

    Qty: 5
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

    -The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

    -The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

    -The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

    -Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

    Basic Qualifications
    -Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

    Desired skills
    -Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

    -Computer programming experience.
    -MATLAB experience.
    -Proficiency with Microsoft Office suite (Word, Powerpoint,
    Excel, Outlook) and Microsoft Windows operating system.
    -Works well within a team and possesses good written and verbal communication skills.

    CNE Work Location: Fort Worth, TX
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $74.00 Hourly
     
    Job Number: LMRMS-2699-1S
    Job Location: Patuxent River, MD
    Rate: 74/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/17/2019
    Last Updated: 05/01/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Flight Simulator Design Engineer 4

    Description:
    Chipton-Ross is seeking a Flight Simulator Design Engineer 4 for an openings in Berkeley, MO.

    RESPONSIBILITIES:
    -22 Training Systems Test Pilot SME to accomplish system design, integration, and test for the F-22 Mission Training Center (F-22 MTC). Responsibilities include:
    - The successful candidate will work independently and will assist other members of the Test Team in the performance of day-to-day operations in a fast-paced testing environment.
    - Team members create and execute Test Procedures to ensure the trainers correctly simulates aircraft performance and the operational environment.
    - Team members will help develop system requirements, and perform all aspects of system testing on several types of pilot training systems.
    - Off shift and weekend work may also be occasionally required to meet contractual milestones, objectives and delivery schedules
    - This is a mid-level to senior grade position

    Plans research and development programs for flight simulator requirements. Translates contract requirements into work requirements, processes and tasks. Manages customer and supplier relationships. Researches and responds to specialized technical questions from customers on flight simulator operations, service and regulatory concerns. Provides on-site customer assistance to support the introduction of new training equipment. Resolves specialized customer issues in the field. Leads and reviews analysis and evaluation of specialized engineering and supplier aircraft systems and performance data, operational documents and software for delivery to customer. Researches and analyzes customer and regulatory authority requirements to ensure they comply with industry standards. Leads and reviews client processes across organizations for defining the customer product, delivery and support. Develops new/revised processes in support of customer requirements and/or changes in company guidelines. Works under minimal direction.

    ADDITIONAL EXPERIENCE:
    - Experience in an aircraft test environment
    - Experience flying F-22 and/or other fighter aircraft

    EDUCATION:
    Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    TRAVEL: YES
    Ability to travel domestically and internationally.25% international travel to Okinawa Japan and UK. Travel duration will be less that 29 days.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM
    Ability to work flexible hours, overtime and occasional weekends when necessary.

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 184162
    Job Location: Berkeley, MO
    Rate: $DOE
    Duration: 6 Months
    Input Date: 01/17/2020
    Last Updated: 06/05/2020
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Flight Simulator Design Engineer 4

    Description:
    Chipton-Ross is seeking 3 Flight Simulator Design Engineer 4's for openings in Berkeley, MO.

    RESPONSIBILITIES:
    Seeking F-15 Training Systems Test Pilot SMEs to accomplish system design, integration, and test for the F-15 Mission Training Center (F-15 MTC). Responsibilities include:
    - The successful candidate will work independently and will assist other members of the Test Team in the performance of day-to-day operations in a fast-paced testing environment.
    - Team members create and execute Test Procedures to ensure the trainers correctly simulates aircraft performance and the operational environment.
    - Team members will help develop system requirements, and perform all aspects of system testing on several types of pilot training systems.
    - Off shift and weekend work may also be occasionally required to meet contractual milestones, objectives and delivery schedules
    - This is a mid-level to senior grade position

    Plans research and development programs for flight simulator requirements. Translates contract requirements into work requirements, processes and tasks. Manages customer and supplier relationships. Researches and responds to specialized technical questions from customers on flight simulator operations, service and regulatory concerns. Provides on-site customer assistance to support the introduction of new training equipment. Resolves specialized customer issues in the field. Leads and reviews analysis and evaluation of specialized engineering and supplier aircraft systems and performance data, operational documents and software for delivery to customer. Researches and analyzes customer and regulatory authority requirements to ensure they comply with industry standards. Leads and reviews client processes across organizations for defining the customer product, delivery and support. Develops new/revised processes in support of customer requirements and/or changes in company guidelines. Works under minimal direction.

    ADDITIONAL EXPERIENCE:
    - Experience in an aircraft test environment
    - Experience flying F-15 and/or other fighter aircraft

    EDUCATION:
    Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    TRAVEL: YES
    Ability to travel domestically and internationally.25% international travel to Okinawa Japan and UK. Travel duration will be less that 29 days.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 4:00 PM
    Ability to work flexible hours, overtime and occasional weekends when necessary.

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 184160
    Job Location: Berkeley, MO
    Rate: $DOE
    Duration: 6 Months
    Input Date: 01/17/2020
    Last Updated: 06/05/2020
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail
     
    Job Number: 20-148303
    Job Location: Southeast
    Rate: $70.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 02/11/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail

    Education and Experience Requirements:
    Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
    Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
    Flight Test Engineer Certification may offset one year of experience requirement.


    Position Purpose:
    Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
    2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
    3. Work with engineering and test pilots to define test points that are conducted on test aircraft
    4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
    5. Definition of the aircraft configuration to support the on aircraft test
    6. Tracks test points and updates pass/fail/repeat status
    7. Supports on aircraft ground/flight testing as required.
    8. Provides the judgment on acceptable test data during or post flight
    9. Processing of data following a test flight to document test results
    10. Development of flight test reports to show compliance with test requirements
    11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
    12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
    13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
    14. Conducts flight test brief with flight ops and engineering
    15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
    16. Generates and transmits post flight test summary
    17. Conducts debrief of test mission with test crew and engineering
     
    Job Number: 148303
    Job Location: Savannah, GA
    Rate: $55/hr to $70
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/22/2020
    Last Updated: 04/06/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Unique Skills:
    • Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    • Experience executing test procedures onboard experimental fixed wing test aircraft
    • Experience performing analysis of post flight data to determine pass/fail

    Essential Functions:
    • Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
    • Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
    • Work with engineering and test pilots to define test points that are conducted on test aircraft
    • Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
    • Definition of the aircraft configuration to support the on aircraft test
    • Tracks test points and updates pass/fail/repeat status
    • Supports on aircraft ground/flight testing as required.
    • Provides the judgment on acceptable test data during or post flight
    • Processing of data following a test flight to document test results
    • Development of flight test reports to show compliance with test requirements
    • Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
    • Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
    • Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
    • Conducts flight test brief with flight ops and engineering
    • Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
    • Generates and transmits post flight test summary
    • Conducts debrief of test mission with test crew and engineering

    Education and Experience Requirements:
    • Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
     
    Job Number: 24-378
    Job Location: Savannah, GA
    Rate: $55-$70/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 01/09/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
    2. Experience executing test procedures onboard experimental fixed wing test aircraft.
    3. Experience performing analysis of post flight data to determine pass/fail.

    Education and Experience Requirements:
    1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
    3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
    4. Flight Test Engineer Certification may offset one year of experience requirement.

    Position Purpose:
    1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
    2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
    3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
    4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
    5. Definition of the aircraft configuration to support the on aircraft test.
    6. Tracks test points and updates pass/fail/repeat status.
    7. Supports on aircraft ground/flight testing as required.
    8. Provides the judgment on acceptable test data during or post flight.
    9. Processing of data following a test flight to document test results.
    10. Development of flight test reports to show compliance with test requirements.
    11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
    12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
    13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
    14. Conducts flight test brief with flight ops and engineering.
    15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
    16. Generates and transmits post flight test summary.
    17. Conducts debrief of test mission with test crew and engineering.

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    4. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12036
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/09/2020
    Last Updated: 03/18/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Ground Test Project Engineer

    Description:
    PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
     
    An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
     
    The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
     
    They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
     
    They will:
    • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
    • Support and manipulate Microsoft based tools in support of project schedule and status.
    • Communicate with other program integrated product teams.
    • Compile and analyze performance reports.


    .
    The ideal candidate will have:
    • Superior business and data skills,
    • Knowledge of IMS based project management and can work in a team environment.
    • Understanding of Aerospace, Helicopter and / or development program experience
    • Knowledge of mechanical / structural design and test

     
    Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
     
     
     
    Job Number: 1910110034
    Job Location: Stratford, CT
    Duration: 6 months
    Input Date: 12/16/2019
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mike Flanery
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering:
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
    • Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements
    • Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-390
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

    Unique Skills:
    As part of the Completions Engineering Mechanical Definition Team:
    • Define and create Build Lists of interior components for aircraft
    • Evaluate customization requests for engineering and manufacturing feasibility
    • Analyze models to determine asset re-use or new custom engineering requirements
    • Support evaluation and determination of certification strategy of aircraft
    • Experience in designing aircraft Interior Furnishings preferred
    • CATIA V5 / SmarTeam preferred

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-383
    Job Location: Savannah, GA
    Rate: $60-$65/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 01/24/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-367
    Job Location: Savannah, GA
    Rate: $58-$63/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 01/17/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-368
    Job Location: Savannah, GA
    Rate: $55-$58/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 01/17/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Interiors Design Engineer

    Description:
    Position Summary:
    Seeking an experienced design engineer that has experience in the interior completions industry who has lead teams of modelers/interior designers on fast paced completions projects. This person does not have to have Solidworks experience.


    • Must have experience as a lead engineer
    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing CATIA, AutoCAD or Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience


    The Structures Company is an AA/EOE.
     
    Job Number: 355
    Job Location: IN
    Rate: $65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 05/01/2020
    Last Updated: 05/09/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Stress Analyst

    Description:
    Summary Statement:

    Applies expert and specialized knowledge to contribute to the development of new techniques and concepts related to the design, development, testing, manufacturing and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft. Recognized as the resident expert in the engineering discipline within the Company.

    • System stress analysis background
    • EBU experience specifically
    • 10+ years of stress analysis experience
    • Having lead experience is not necessary, but being a senior role is.
    • Managing internal stress analysis tools is required………guides, FEA tools, databases, etc.
    • Will be managing 8 internal employees and a sizeable offshore team.
    • Will have to travel to Savannah, Toulouse, France and Hartford, CT.
    • Bachelor level degree in appropriate engineering discipline, master level degree preferred,



    The Structures Company is an AA/EOE.
     
    Job Number: 364
    Job Location: Tulsa, OK
    Rate: $100-$130K **DOE***
    Duration: ***DIRECT POSITION***
    Start Date: ASAP
    Input Date: 02/19/2020
    Last Updated: 04/20/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Weight Engineer

    Description:
    We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

    Responsibilities of the Lead Weight Engineer​

    Aircraft weight reduction activity and design weight growth study.
    Certification activity related to weight and C.G.
    Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
    Checking the status and forecast of aircraft weight and C.G.
    Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
    Designing weight growth plans.
    Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
    Preparation of weight and balance manual.
    Improvements of weight data gathering and verification process.

    Requirements Lead Weight Engineer

    15 plus years of aircraft certification experience in relation to weight and center of gravity.
    Extensive flight test experience.
    Previous Leadership experience required.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    Excellent verbal and written communication skills in English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 01/30/2020
    Last Updated: 04/02/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison Stress Engineers - Commercial or Military Aircraft

    Description:
    We are looking for Stress Analysts / Stress Engineers who have a background doing Liaison support on structural repair/maintenance of in-service aircraft structures and components.
    MUST BE US PERSONS
    Must have:
    BS degree
    Airframe Structural Analysis experience
    Extensive Classical Analysis background required

    Develops and provides engineering solutions for the overhaul and repair of large transport aircraft structural components, requiring a sound knowledge of the principles, theories, and concepts that are consistent with Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) regulations. Technical foundation to perform approvals of single and multi-use repair packages, and manage product center workflow and schedules,. Manage projects and special assignments with little to no supervision. May function as a team lead for less experienced engineers.

    Essential Functions and Key Responsibilities:

    Reviews damage reports to develop repair schemes, authors work instructions, and performs the stress analysis and substantiation supporting the repair with no supervision. Repair development and substantiation will include a variety of analysis methods and require an established knowledge of mechanically fastened metallic structure, adhesively bonded metallic structure, composite structure, welding, and brazing. Developed repairs must be substantiated to meet or exceed the original design certification requirements.

    Established knowledge of, and ability to apply repair analysis techniques such as Boeing Structures I and II, ABARIS/Laminate Plate Theory, Bruhn, Flabel, ETC. Develops and substantiates complex repair schemes with no supervision.

    Working knowledge of FAA and EASA regulations, AD’s, NPRM’s, AC’s, AMC’s, SDR’s, EWIS, etc. Other aviation authority knowledge such as CAAC/JAA/JCAB is a plus.

    Performs technical review and approval of less experienced engineer’s repair packages.

    Mentoring less experienced engineers, co-ops, and interns and may be responsible leading direct reports.

    Manages projects and/or product centers with little to no supervision.

    Develop and/or peer review multi-use repair specifications, drawings, and engineering reports.

    Review and interpret technical documents such as Drawings, Structural Repair Manuals (SRM’s), Component Maintenance Manuals (CMM’s), Illustrated Parts Lists (IPL’s/IPC’s), Material Specifications, Process Specifications, etc.

    Develop and/or approve repair data packages and obtain FAA approvals through internal and external FAA Designated Engineering Representatives (DER’s).

    Communicate and interact with Airbus and Boeing engineering for repair development support, as well as coordinate customer engineering approvals of developed repair schemes.

    Troubleshoot failure modes and interact with shop mechanics to develop cost effective repairs that are feasible to accomplish in a timely manner that supports production schedule.

    Above average verbal and written skills, ability to tailor communication to technical and non-technical audiences.

    The Structures Company is an AA/EOE.
     
    Job Location: OK
    Rate: ***DOE***
    Duration: ***DIRECT POSITION***
    Start Date: ASAP
    Input Date: 02/13/2020
    Last Updated: 04/06/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Loads & Dynamics Engineer 3 & 4

    Description:
    Job Description:
    • Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

    Required:
    • Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
    • Experience in Modelling & Simulation and Tools & Process development.
    • Demonstrated problem-solving skills.
    • Possess interpersonal communication (written & verbal) skills in a team oriented environment.
    • Ability to interact professionally with customer, supplier, field & production representatives.
    • Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
    • Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.  


     
     
    Job Number: 2010110794
    Job Location: Saint Louis, MO
    Duration: 12 months
    Input Date: 01/16/2020
    Last Updated: 06/05/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisa Petersen
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Project Manager (VH-92A, VH-3D and VH-60N Aircraft)

    Description:
    The ideal candidate will drive project management for technical and process improvement projects.

    Responsibilities include:
    • Developing Productivity Tools
    • Managing Documentation
    • Tracking Schedules.

    This candidate will be responsible for Logistics Projects with significant scope and complexity.

    Required Skills
    • Must possess the knowledge, skills, and abilities to work independently with minimum oversight
    • Management of logistics proposal activities including the flow down of proposal requirements and the planning, execution, and delivery of high-quality logistics elements / spares deliveries under contract
    • Development and management of schedules and budgets for all logistics activities will be required.
    • Interact with supply chain, op-centers and internal and external customers on a regular basis, including the development and presentation of logistics material at formal meetings.

    Desired Skills
    • Technical experience and knowledge of the VH-92A, VH-3D and VH-60N model aircraft is desirable
     
    Job Number: 2010111727
    Job Location: Stratford, CT
    Per Diem: split
    Overtime: possible
    Duration: 1.5 years
    Start Date: ASAP
    Input Date: 02/07/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Looking for Wire Design Engineer in OK, MO and WA states

    Description:
    Multiple Positions Below

    1. Wire Design & Install Engr 5

    Location: Hazelwood, MO
    Duration: 5+ Months

    Description:
    The QF-16 team is responsible for the design and installation of Drone Peculiar Equipment (DPE) to convert retired USAF F-16's into Full Scale Aerial Targets. This role leads all wire harness design activities from schematic wire diagram definition through cable/harness definition. This position supports fielded aircraft as well as two active production lines. The candidate will apply their electrical design background to troubleshoot issues with fielded aircraft, provide technical guidance to supplier management, and provide design support to the production lines. The primary role for this position is to develop the QF-16 electrical design baseline in accordance with new business opportunities.

    Typical Education/Experience:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

    Primary responsibilities:
    - Develops and maintains cable/wire harness detail and assembly designs.
    - Analyzes results and performs design reviews.
    - Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
    - Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests).
    - Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
    - Develops basic statements of work.
    - Participates in technical review of supplier capabilities to facilitate source selection.
    - Analyzes functional and physical input to assure development of complete integrated design.

    Basic Qualifications:
    - This position requires the ability to obtain a US Security Clearance.
    - 10+ years of experience designing the fabrication of wire harness/cables.
    - 5+ years of experience in a leadership role, leading teams or projects to successful completion.

    Preferred Qualifications:
    - Familiarity with Teamcenter Engineering.
    - Ability to interrogate models in Unigraphics (NX).
    - Experience communicating with customers and suppliers.
    - Experience with aircraft modification design.

    Education / Experience:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Skill Code: 601-Wire Design & Install Engr-General





    2. Wire Design & Install Engr 5

    Location: Oklahoma City, OK
    Duration: 6+ Months

    Description:
    Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
    OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

    This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

    Other Job Responsibilities May Include:
    - Provides guidance in the development of cable/wire harness detail and assembly designs.
    - Provides guidance in the development of electrical product detail, assembly and installation designs.
    - Provides direction used by multiple teams to analyze complex results and performs design reviews.
    - Provides guidance in engineering design disposition on discrepancies.
    - Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
    - Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
    - Directs the technical review of supplier capabilities to facilitate source selection.
    - Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
    - Works under consultative mentorship.

    Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    Basic Qualifications (Required Skills and Experience):
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Skill Code: 652-Wiring Design





    3. Wire Design & Install Engr (Level 3, 4, 5)

    Location: Tukwila, WA
    Duration: 6+ Months

    Description:
    Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
    Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

    Position Responsibilities:
    - Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
    - Using design tools prepares documentation and incorporates design changes.
    - Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
    - Supports engineering system design and functionality validation activities.
    - Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
    - Coordinates activities and products with internal partners and external suppliers.
    - Works under general direction.

    Basic Qualifications (Required Skills and Experience):
    - Designing or supporting electrical wire harness Installations
    - Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Preferred Qualifications (Desired Skills/Experience):
    - Active security clearance is preferred
    - Client Defense Experience preferred but not required

    Skill Code: 679-Electrical/Electronic Installation Design
     
    Job Location: Hazelwood, MO
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: Asap
    Input Date: 01/20/2020
    Last Updated: 03/02/2020
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    M&P Engineer

    Description:
    Description
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledge of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus
     
    Job Location: Mojave, CA
    Rate: $50-$75
    Per Diem: Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 03/11/2020
    Last Updated: 05/08/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
     
    Job Location: Tulsa, OK
    Rate: $60/hr to $68/hr
    Per Diem: Possible
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/31/2020
    Last Updated: 03/11/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
     
    Job Number: 138961
    Job Location: Tulsa, OK
    Rate: $64/hr to $68/hr
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 01/24/2020
    Last Updated: 03/05/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    Unique Skills:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    - Typically a 40 hr work week, with some week/weekend OT a possibility.
    - Position is full-time at a supplier in Tulsa, OK

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Tulsa, OK
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2020
    Last Updated: 02/24/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Vivek Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Structures Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    MRB Structures Engineer
    • Bachelors degree in Aerospace or Mechanical Engineering.
    • Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
    • Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    • Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
    • Experience should be in a Production and/or schedule-driven environment.
    • Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    • Strong written/verbal communication and interpersonal skills.
    • Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
    • Initially 1st shift. Occasional weekends expected. Transition to 2nd shift may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-398
    Job Location: Savannah, GA
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 02/11/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Structures Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Unique Skills:
    MRB Structures Engineer
    • Bachelors degree in aerospace or mechanical engineering.
    • Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    • Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    • Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    • Familiarity with results of composite NDI/NDT methods required.
    • Experience should be in a Production and/or schedule-driven environment.
    • Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    • Strong written/verbal communication and interpersonal skills.
    • Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    • Typically a 40 hr work week, with some week/weekend OT a possibility.
    • Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-399
    Job Location: Tulsa, OK
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 02/07/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Systems Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    MRB Systems Engineer
    • Bachelors degree in aerospace or mechanical engineering.
    • Minimum 7 years Systems MRB Engineering experience at a recognized aerospace manufacturer.
    • Experience should include creation and justification of engineering dispositions related to composite nacelle systems.
    • Aircraft MRB Systems experience should include: ECS installations, Auxiliary mechanism verifications, assistance with movable component installation and rigging, Acceptance Test Procedure (ATP) deviations and resolution, installation and operational verification of nacelle components ( fixed cowl, hinged cowl doors, TR,etc.).
    • Experience should be in a Production and/or schedule-driven environment.
    • Strong written/verbal communication and interpersonal skills. Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    • Typically a 40 hr work week, with some week/weekend OT a possibility.
    • Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-397
    Job Location: Tulsa, OK
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 02/07/2020
    Last Updated: 02/13/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Manufacturing Engineer

    Description:
    Aircraft experience, CATIA V5
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Manufacturing Engineer

    Description:
    CATIA, aircraft systems
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer (Aerospace Industry)

    Description:
    This candidate will:
    • manage high complexity design and planning of layout for assembly and materials handling.
    • Adapt machines or equipment design to factory and production conditions.
    • Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

    Candidates will support a work transfer project to India.

    Project scope includes:
    • baselining current processes,
    • implementation of corrective actions, and
    • related fixture design.

    Additional duties to include support of legacy product lines. Legacy lines include:
    • aircraft wipers,
    • video systems, and
    • electronic sub systems.

    Required Qualifications
    • Good interpersonal skills and be self-motivated.
    • Bachelor’s degree

    Desired qualifications:
    • Experienced Manufacturing Engineer capable in process design, work instruction creation and fixture design.
    • Experience in Aerospace Engineering
    • Proficiency in SAP, Teamcenter, CREO
     
    Job Number: 2010110561
    Job Location: Burnsville, MN
    Per Diem: split
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/14/2020
    Last Updated: 02/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - 2nd shift - Clearance TX

    Description:
    Job Title: Manufacturing Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2670-1
    Max Pay Rate: $50.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    The Flight Test Instrumentation Specialist is responsible for supporting the build, install/modification, and demodification of Instrumentation measurements and supporting equipment. This position will support instrumentation leadership and represented employees.

    Responsibilities include a broad range of oversite, including but not limited to, metal fabrication (CNC machining and sheet metal hand forming), electrical harness fabrication, structure and electrical install on aircraft, and maintenance and removal of instrumentation measurements and equipment on aircraft. This position requires strong team work skills, administrative, communication (written and verbal) and interpersonal skills. May be required to act as supervisor during supervision absence.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    -Experience in ONE of the following:
    -Metal fabrication experience
    -CNC machining experience
    -Harness fabrication and routing (install)
    -Flight Line/Aircraft modification experience

    Desired skills
    -Prior specialist experience
    -Excellent communication skills
    -Ability to work with varying levels of management across multiple organizations
    -SFM, PDM, EDMS
    -Experience working in a union environment

    Qty 1 position
    *This position is for 2nd Shift*
     
    Job Number: JE-2670-1S
    Job Location: Fort Worth, TX
    Rate: 50/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/17/2019
    Last Updated: 02/28/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Shift: 2nd Shift

    Unique Skills:
    Previous Gulfstream experience working with live aircraft (G500 and G600 preferred).

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 12160
    Job Location: Savannah, GA
    Rate: $52.50/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/29/2020
    Last Updated: 03/06/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Many New Long Term Aerospace Programs in Missouri

    Description:
    Stress Engineers: either metallics or composites (secret and non-secret)

    Structural Designers: must be degreed and have UG NX experience

    Electrical Design Engineers: must be degreed and have UG NX experience

    Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

    Tool Designers: UG NX background, aerospace or aircraft background

    Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

    Software Engineers: Ada, C++; avionics experience a plus

    System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

    PDS Tech - #1 Aerospace supplier in Missouri
     
    Job Location: Missouri
    Input Date: 02/12/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy or Ken Brownsher
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Master Minimum Equipment List Specialist

    Description:
    We are seeking a Minimum Equipment List (MEL) Specialist with aircraft maintenance experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with aircraft operations as well as MMEL (Master Minimum Equipment List) development experience.

    Responsibilities of the MMEL Specialist

    Creation and execution of all MMEL development.
    Updating and creating MMEL justification analyses.
    Updating and creating Dispatch Deviations Guide maintenance and operational procedures.
    Coordinating MMEL and associated manuals’ contents with design and safety engineering and the customers.
    Planning, coordinating, observing MMEL validation and verification activities.
    Coordinating with aviation authorities (JCAB, FAA, and EASA) for MMEL approval throughout Flight Operation Evaluation Board review.
    Development a process of updating MMEL as well as monitoring the airline’s MEL operation, evaluating and updating the MMEL documentation process and authority approval process.
    Monitoring and supporting airline’s MEL operation after Entry Into Service.
    Updating and obtain authorities approval for future MMEL revisions.


    Requirements

    4 year engineering degree.
    Minimum 5 years of experience in Aircraft Maintenance or Operations.
    Minimum 3 years of MMEL development experience, including experience coordinating with airworthiness authorities and airlines regarding MMEL documentation.
    Knowledge of CS MMEL and FAA MMEL system (FOEB, Policy Letters, etc.).
    Airline support experience regarding MMEL/MEL.
    Excellent communication skills in English.
    Ability to travel domestically as well as internationally.
     
    Job Location: Japan
    Input Date: 01/30/2020
    Last Updated: 02/25/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Materials & Process Engineer

    Description:
    We are looking for a Materials & Process Engineer in Mojave, CA.
    Composites experience is a MUST.
    MUST BE US Persons.

    Experience with composite material testing and processing is a necessity.
    Candidate must be familiar with ASTM testing, data analysis, and writing technical reports.
    Authoring of composite related processing specification is desired.
    Experience with structural adhesives and metallurgy is an added bonus.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: $55-80/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-Term
    Start Date: ASAP
    Input Date: 06/02/2020
    Last Updated: 06/05/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: tara.gilbert@thestructurescompany.com
    Website: www.thestructurescompany.com

    M&P Engineer

    Description:
    We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

    Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

    Duties:
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements:
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledgable of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


    The Structures Company is an AA/EOE.
     
    Job Number: 279
    Job Location: Mojave, CA
    Rate: $60-$75/Hr. **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 06/01/2020
    Last Updated: 06/05/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Processes Engineer

    Description:
    Summary:
    As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

    On any given day you might:
    • Support building and lead the Materials and Processes team for the aircraft development
    • Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
    • Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
    • Perform trade studies, write proposals, and support new business development plans

    We're looking for someone who has:
    • Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
    • 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
    • 3+ years of experience leading technical resources and team
    • Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
    • Knowledge of composite certification and structural bonding requirements for Part 25 preferred
    • In-depth and current knowledge of Part 25 regulatory requirements
    • Demonstrated success in dealing and influencing internal and external stakeholders
    • Experience in engineering support of aircraft production line activities is desirable
    • Strong decision making and communication skills
    • Excellent problem-solving skills across multi-disciplinary skill sets
    • Experience in a global environment working with customers and suppliers

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-038
    Job Location: Reno, NV
    Rate: $75-$95/hr
    Per Diem: YES
    Overtime: Possible
    Duration: 1+Year
    Start Date: ASAP
    Input Date: 03/09/2020
    Last Updated: 03/18/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanic General

    Description:
    Mechanic General

    Job ID # 2020-10874

    Contract Opportunity

    Location: San Antonio, TX

    Industry: Aerospace & Defense

    Minimum Education: High School Diploma / GED



    What You’ll Do:
    •Maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
    •The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
    •Must be able to prioritize workload to maintain schedules on assigned projects.



    What You’ll Need:
    •Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
    •This job requires working knowledge of technical publications.
    •747 Flight ramp experience preferred



    *U.S. Citizenship is required by law, regulation, executive order, or government contract.



    Education & Experience:
    •High school diploma / GED



    What to Expect:
    •Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
    •Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





    Resources

    For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

    For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
     
    Job Number: 2020-10874
    Job Location: San Antonio, TX
    Input Date: 02/13/2020
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanica Engineer/Designer - Interiors/Cabin Completions

    Description:
    Unique Skills:

    Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering: -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. - Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. -Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule. Preferred Skills: - Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements -Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
     
    Job Number: 131980
    Job Location: Savannah,, GA
    Input Date: 02/11/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.c