Job Search Results

664 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 06:09AM Pacific Time by ContractJobHunter. )

Listings 1 - 664

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2603 - PROJECT MANAGEMENT - cv, word doc only

Description:
Evaluate, participate and manage continuous improvement initiatives required to manufacture aircrafts & methods processes.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, implementation and commissioning.

Manage the budget, the schedule and the resources in every project phases. Prepare and present progress status at different management levels.

Align resources involved in project and be the intermediary between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

A minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Possess strengths in human resource management as part of matrix project management.

PMI certification (asset).

Good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Be passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2603
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - only 3 mths
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2604 - LIAISON ENGINEER (MRB) - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components and Interiors.

Support to Production, Design Engineering, Procurement, Methods and Quality in coordinating resolutions to
issues.

Review & trouble shooting of all Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of A/C Interior issues in conjunction with Design Engineering as required.

Review & prepare disposition on Green Aircraft issues and Create Repair Engineering Orders, as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Support production and Methods as required.

Formal education to degree level in mechanical/aerospace engineering or related field, coupled with a minimum
of one year MRB experience or three years design experience in a Mechanical or an Aerospace environment /
College degree in mechanical/aerospace engineering or related field, coupled with a minimum of three year
MRB experience or five years design experience in a Mechanical or an Aerospace environment

Requires good organizational, communication and interpersonal skills and command of the English language.

Must have a good knowledge of aircraft structure & system installation technical requirements.

Interior completion and Electrical & Systems experience would be an asset.

Requires an energetic person with a high sense of commitment, and willing to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Position is for second shift and/or weekend work requirements.

Previous CATIA, Design and MRB experience including support to production would be an asset.

***PLEASE NOTE: 3 day shift ; 2 Evening shift; 2 night Shift; 1 Weekend shift***
 
Job Number: 2604
Job Location: Canada
Rate: 56.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2605 - ENGINEERING PROFESSIONAL - ANDON - cv, word doc only

Description:
Review and approve change request pertaining to installation design activities.

Translate and apply design requirements into comprehensive design packages that meet Bombardier design practices and airworthiness regulatory requirements.

Required to provide estimates and statements of work for design related activities.

Assist in design review presentations and technical investigations.

Will also be asked to support suppliers, production and final line installations.

Produce detail and installation drawings of cabinet installation and systems installations.

Engineering degree in Aerospace or Mechanical Engineering or a Technical diploma with 3-5 years of related experience.

Knowledge of CATIA V5 is required.

Bilingual in English and French.

This position will require good integration skills when dealing with multi-discipline engineering groups and partners.

1 position day shift, 3 positions evening shift, 2 positions weekend shift, 2 positions night shift.

Knowledge of Catia V5 is required.

Previous experience with Global 7500 is a definite asset.

This position will require good integration skill when dealing with multi-discipline engineering groups and partners.

Support and define aircraft schedules is required.

Comfortable in unionized context.

Experience working in a Manufacturing environment in the aerospace industry is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.
 
Job Number: 2605
Job Location: Canada
Rate: 48.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2608 - CABIN ELEC. SYS. INTEGRATOR - cv, word doc only

Description:
Support production and troubleshoot cabin systems on aircraft when required, to minimize issues impact on customer and/or in production.

Document the issues in order to allow a fast resolution including the analysis of electrical schematics and technical requirements as well as the interaction with the different systems suppliers.

Integrate, test and troubleshoot cabin systems such as the Cabin Management, Entertainment, Camera, Lighting or Security.

Work with different functions to plan, organize and run system development tests.

Provide visibility daily to your supervisor on the progress of the testing, the production support and the issue encounter.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Support change requests made by the Production team as well as change proposals made by customers.

Prepare the required documents, such as technical specifications, block diagrams, functional test engineering requirements (FTER) and test definition sheets (TDS).

Manage, review and approve the deliverables of the Electrical System Suppliers.

Prepare systems definition documentation such as ESSDs and wiring diagram and certification documentation for cabin systems.

Some travel may be required to support production in Client sites outside of the city.

Electrical or software engineering bachelor degree and at least three (3) years of relevant experience in aircraft testing and troubleshooting;

**This position is also open to New Grads in Electrical Engineering**

Cabin systems experience is an asset,

Familiar with FAR 25 requirements and the qualification rules pertaining to avionics/electrical systems.

Working experience using XML, embedded system programming, SNMP, HTML 5 and personal electronic device application is an asset.

Working experience with IP addressing verification, network topology (including wireless LAN), troubleshooting network tools (e.g Wireshark), telephony (SIP), voice over ip (VOIP) and quality of service (QoS) is an asset.

Have experience in dealing with a supplier base.

Have a working experience using AutoCAD, ECAD, CATIA and MS Office.

Must be bilingual (English and French), both written and spoken.

Must be able to work under minimum supervision, enjoy teamwork and have project organization skills.

Must also demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Individuals having a previous experience in testing and integration of interior systems for business aircraft will be preferred.

Position is for evening or night or weekend shift with 3 day shift ; 1 Evening shift; 1 night Shift; 1 Weekend shift.
 
Job Number: 2608
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2609 - MECHANICAL SYSTEMS INTEGRATION COMPLETION - PRODUCTION SUPPORT - cv, word doc only

Description:
Act as the technical specialist for the systems

Receive, analyze and define solutions to meet customer and operation needs.

Collaborate with different internal parties (Operations, Detailed Design, Projects, Programs, Technical, etc.) as well as suppliers on daily basis.

Lead problem resolution by identifying the right stakeholders, establishing options, collecting facts, reaching alignment on the recommendation and bringing the recommendation for decision.

Produce and Review technical deliverables and datasets (3D models and 2D drawings) and ensure that they meet technical and Client requirements.

Be in direct contact with suppliers and be responsible for the delivery of quality engineering documentation that meets Client Standards.

Identify technical impacts and lead production line support change management processes.

College or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have technical experience in interior completion on Client Platform and knowledge of requirements for aircraft systems and interiors.

Understanding of product structure and aircraft configuration.

Have experience in working with Enovia / Enovia PLM

Ability to understand complex engineering issues and are innovative in problem solving.

Are well organized and are project oriented.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Good communication skills including good English writing skills, and good English and French verbal skills.

Demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.

1 day shift ; 1 Evening shift; 1 night Shift.
 
Job Number: 2609
Job Location: Canada
Rate: 57.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2610 - MATERIALS & PROCESSES ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.).

Engage in engineering development work.

Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports (including flammability).

Perform Trade and Design Studies.

Support various research and development projects.

Act as M&P expert.

Create, improve and adapt technical and functional processes.

Take on strategic projects management.

Plan, execute audits, prepare reports and follow up on corrective actions.

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Are familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Are familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Have knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Have practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Have practical knowledge and experience in aircraft structure and completion components.
 
Job Number: 2610
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
7 Stress Engineers - Liaison Repair Experience Required

Description:
7 Liaison Stress Engineers Needed
US PERSONS REQUIRED
Must haves:
• BS degree
• MRO/Repair background
• Airframe experience, specifically commercial and military (F-18 preferred) wings, structural components and thrust reversers.
Airframe Structural Analysis experience
Extensive Classical Analysis background required.
*NO FEA performed on this job - All classical Analysis methods.
Airframe analysis is in support of maintenance and repair of in-service aircraft parts and structures.
Must have good communication skills and must have ability to communicate and present findings to technical and non-technical people.
Engineer will identify the damage to the airframe or component that is outside of the aircraft manual and will need to use classical analysis methods to create a repair concept that will restore the airframe load path. Structures will be both composite and metallic.
MRB background a plus, but not mandatory.
*Candidates who can turn a wrench will fit well, even if it is working on their own cars OR a stress engineer who used to be an A&P mechanic, for example.

The Structures Company is an AA/EOE.
 
Job Number: 365
Job Location: OK
Rate: ***DOE***
Duration: ***DIRECT POSITION***
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3042-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 10/9/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.


Qualifications and Education Requirements
C-130 OR UH-60 experience REQUIRED

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1

Qty 4 positions
Please make sure all candidates have EITHER C-130 OR UH-60 experience.
 
Job Number: JEG-3042-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight control experience required - no clearance URGENT SC

Description:
167510 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3126-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 8/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 or C-130 Experience is Strongly desired
Rigging of flight control experience required

Skills: Category Name Required Importance Experience
Areas of Expertise Hydraulics No 1 < 1 Year Areas of Expertise P-3 No 1 1 - 2 Years Qty 2 positions Must work 2nd shift.
 
Job Number: JEG-3126-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight controls required - no clearance URGENT SC

Description:
167509 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3128-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 Exp or C-130 Exp desired
Rigging of flight controls required

Skills: Category Name Required Importance Experience
Areas of Expertise Flight line Maintenance Yes 1 2 - 4 Years
Areas of Expertise P-3 No 2 2 - 4 Years

Qty 6 positions
 
Job Number: JEG-3128-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Composite Technician

Description:
Education and Experience Requirements:
High School graduate or GED.
Q stamp qualified in related composite assembly processes.
Must be able to use basic mathematical formulas to solve dimensional problems.
Good working knowledge of computers and related software.
Five (5) years of related experience in composite manufacturing processes.
Position Purpose:
Under little or no supervision, perform one or more of the following composite part manufacturing functions:
complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment.
Function as a team member and assist in providing technical direction to other team members.
Possess the ability to organize and perform new job tasks with a working knowledge of other parts and part numbers.
Establish priorities and assist in the development of work schedules.
Must be proficient at directing and monitoring the work of team members.
Willing to perform the job functions of a team leader in their absence.

Principle Duties and Responsibilities:
Essential Functions: 1. In a team oriented work environment, manufacture a wide variety of composite aircraft parts to meet manufacturing specifications. Possess the ability to perform close tolerance work.
2. Must demonstrate leadership ability and possess good communication skills.
3. Demonstrate ability to plan, organize, execute, and obtain objectives with minimal direction.
4. Demonstrate the ability to meet the requirements of the manufacturing competencies at the appropriate level in the Employee Effectiveness Review.
5. Proficient at reading work orders, blueprints, GAC specifications, lofts, sketches and operation sheets to determine sequence of operations.
6. Must be proficient in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper.
7. Check all work and ensure a defect free assembly prior to inspection.
8. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc.
9. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations.
10. Adapt to sudden schedule changes.
11. Coordinate with other disciplines concerning projects.
12. Support lean activities as required.
 
Job Number: 150173
Job Location: Tulsa, OK
Rate: $37/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB Catia - Clearance CA

Description:
167092 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2653-1
Max Pay Rate: $91.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.

Will be responsible for providing dispositions to non-conforming material documents. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.

Desired skills
• Good technical, communication, team, and presentation skills.
• Previous Material Review Board (MRB) Authority.
• Major in CE, ME, or AE preferred.
• Desired skills CATIA 3D Modeling.
• GD&T understanding.
• Composite repair.
• Final finish/spec tech familiarity.
• Interchangeability requirements knowledge.
• QADs/ DIMS/ related software experience.
• Some weekend, odd shift and holiday work may be required.

Qty 1 position
 
Job Number: JE-2653-1S
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / flight test - Clearance CA

Description:
167101 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2685-1
Max Pay Rate: $91.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Flight Test Engineering tasking across multiple ADP programs. On some programs will be the sole voice representing flight test Full spectrum of tasking from proposal development through post flight test reporting.

Will be required to customize test processes to individual customers and circumstances. Assess prototype aircraft operations for risk and assist in develop appropriate mitigating procedures.
During flight phase will be the primary individual for controlling test execution, configuration management, troubleshooting, and asset scheduling. Travel, overtime, odd shifts, and weekend work may be required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
- Flight Test execution experience
- Experience with authoring flight test documentation
- Configuration management experience
- Presentation experience to company and customer audiences
- Experience interfacing with all levels of customer management

Desired skills
-Developmental test program experience
-Test project lead or ship lead experience
-Mission Test Director experience
-Proposal development experience
-Must be willing to mentor junior-level team members


Qty 1 position
 
Job Number: JE-2685-1TS
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Air Systems

Description:
We are currently looking for an experienced Air System Engineer to fill an opening with an aerospace company in Renton, WA. Interested candidate should have strong knowledge of flight test operations and flight certification, including a familiarity with aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.

Responsibilities of the Air Systems Engineer
Support Flight Testing Activities, including reviewing test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings.
Participate in Test Readiness Reviews and ensure on-time engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions and Aircraft Troubleshooting.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.

Requirements
Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Solid leadership skills as well as people management skills.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Excellent communication skills (oral, written, presentation) with both external and internal team.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Comfortable and effective working in Microsoft Office and the ability to quickly learn new software and systems.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Design Support Engineers

    Description:
    Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
     
    Job Number: 0207
    Job Location: Baltimore, MD
    Rate: $70-$80 DOE
    Per Diem: yes-split
    Overtime: Possible
    Duration: 6 mos+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEK PROFESSIONALS INC
    Attention: Greg Ambrose
    Address: 103 CHESLEY DR STE 207
    City, State: MEDIA, PA 19063
    Phone: 610/534-8701
    800 Phone: 877/271-1799
    Fax Phone: 610/534-8697
    Website: www.hitekprofessionals.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Interiors Design Engineer - Solidworks

    Description:
    Position Summary:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes.

    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience in Solidworks

    The Structures Company is an AA/EOE.
     
    Job Location: Indianapolis, IN
    Rate: $50-57/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter - no clearance SC

    Description:
    167536 Job Title: Aircraft Painter

    Work Site Address: Greenville, SC 29605
    Job Number: 3199-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/24/2020
    End Date: 8/28/2020
    Position Type: Contract

    Job Summary:
    Coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper. Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Paint Process No 1

    Qty 1 position
     
    Job Number: JEG-3199-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 6 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Structural Analysis Engineer - For Military Aircraft

    Description:
    Develops and provides engineering solutions for the overhaul and repair of large transport aircraft structural components, requiring a sound knowledge of the principles, theories, and concepts that are consistent with Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) regulations. Technical foundation to perform approvals of single and multi-use repair packages, and manage product center workflow and schedules,. Manage projects and special assignments with little to no supervision. May function as a team lead for less experienced engineers.

    Essential Functions and Key Responsibilities:

    Reviews damage reports to develop repair schemes, authors work instructions, and performs the stress analysis and substantiation supporting the repair with no supervision. Repair development and substantiation will include a variety of analysis methods and require an established knowledge of mechanically fastened metallic structure, adhesively bonded metallic structure, composite structure, welding, and brazing. Developed repairs must be substantiated to meet or exceed the original design certification requirements.

    Established knowledge of, and ability to apply repair analysis techniques such as Boeing Structures I and II, ABARIS/Laminate Plate Theory, Bruhn, Flabel, ETC. Develops and substantiates complex repair schemes with no supervision.

    Working knowledge of FAA and EASA regulations, AD’s, NPRM’s, AC’s, AMC’s, SDR’s, EWIS, etc. Other aviation authority knowledge such as CAAC/JAA/JCAB is a plus.

    Performs technical review and approval of less experienced engineer’s repair packages.



    Must have:
    • MUST BE US PERSONS
    • BS degree
    • Airframe Structural Analysis experience
    • Extensive Classical Analysis background required (Bruhn method as an example). *NO FEA performed on this job. All classical Analysis methods.
    • Airframe analysis in support of maintenance and repair of in-service aircraft parts and structures experience, specifically commercial and military (F-18 preferred) wings, structural components and thrust reversers.
    • Must have good communication skills and must have ability to communicate and present findings to technical and non-technical people.
    • They will identify the damage to the airframe, or component that is outside of the aircraft manual and will need to use classical analysis methods to create a repair concept that will restore the airframes load path. Structure will be both composite and metallic.
    • MRB background would be a plus, but not mandatory.



    The Structures Company is an AA/EOE.
     
    Job Number: 368
    Job Location: OK
    Rate: $100-$1115K **DOE**
    Duration: **DIRECT OR CONTRACT TO HIRE**
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic TEST Technician / MUST have C-130J testing experience - no clearance URGENT SC

    Description:
    167551 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3198-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/24/2020
    End Date: 2/24/2021
    Position Type: Contract

    Job Summary:
    This position is for an Avionic TEST Technician:
    Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft.

    Essential Functions (Other duties may be assigned as required)
    • Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
    • Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
    • Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.

    Qualifications and Education Requirements
    MUST have C-130J testing experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130J Yes 1

    Qty 1 position
     
    Job Number: JEG-3198-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - 2nd shift / C-130 required aircraft modification experience require / no clearance SC

    Description:
    167551 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3235-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/17/2020
    End Date: 2/17/2021
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electro-mechanical, and/or optical areas. Installs wire harness on aircraft, to include clamping, tying and terminating. Performs continuity checks.

    Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.

    Qualifications and Education Requirements
    Modification experience required
    C-130 experience required
    Modification installation experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130 Yes 1 4 - 6 Years

    Qty 1 position
    This is a full time 2nd shift position.
     
    Job Number: JEG-3235-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    167249 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2948-1
    Max Pay Rate: $29.00/hr
    Start Date: 1/16/2020
    End Date: 8/14/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
    Installs wire harnesses in aircraft to include routing and termination.

    Qualifications and Education Requirements
    Modification experience STRONGLY desired
    Must have previous aircraft modification experience.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification Yes 1
    Areas of Expertise C-130 No 1

    Qty 10 positions
    Contract length likely to extend
    MORE RESUMES NEEDED
    Modification experience STRONGLY desired

    Manager motivated to make selections quickly
     
    Job Number: JEG-2948-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    166688 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2464-1
    Max Pay Rate: $29.50/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

    Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 1 2 - 4 Years
    Areas of Expertise C-130H No 1 2 - 4 Years

    Qty 8 positions
    This is an URGENT request.
     
    Job Number: JEG-2464-1
    Job Location: Greenville, SC
    Rate: 29.50/hr max
    Duration: 8 months plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / Aircraft MODIFICATION experience REQUIRED - no clearance URGENT SC

    Description:
    167479 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 3125-1
    Max Pay Rate: $29.00/hr
    Start Date: 2/10/2020
    End Date: 7/10/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

    Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Qualifications and Education Requirements
    Aircraft MODIFICATION experience REQUIRED
    P-3 experience a plus but not required

    Skills: Category Name Required Importance Experience
    Areas of Expertise P-3 No 1 1 - 2 Years

    Qty 4 positions
     
    Job Number: JEG-3125-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 5 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Bleed Air Systems Design Engineer - 2 Openings

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
    college or university program
    2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
    3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software
    Must Haves:
    Engine Bleed air design experience
    Part 23/25 aircraft experience
    Catia V5 3D/2D experience
    Degree preferred


    The Structures Company is an AA/EOE.
     
    Job Number: 369
    Job Location: NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    Preferred Skills:
    - Previous executive jet cabin engineering experience
    - Knowledge of configuration management
    - Aircraft certification
    - CATIA V5
    - SmarTeam
     
    Job Number: 20-150865
    Job Location: GA
    Rate: $60.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Preferred Skills:
    1. Previous executive jet cabin engineering experience.
    2. Knowledge of configuration management.
    3. Aircraft certification
    4. CATIA V5
    5. Smarteam

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12141
    Job Location: Savannah, GA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration Management Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • Previous executive jet cabin engineering experience
    • Knowledge of configuration management
    • Aircraft certification
    • CATIA V5
    • SmarTeam

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-388
    Job Location: Savannah, GA
    Rate: $50-$60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DER Avionics Engineer

    Description:
    General Summary:
    The DER Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

    Duties and Responsibilities:
    • Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
    • Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems.
    • Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
    • Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
    • Perform system evaluation and analysis to verify the system design compliance with functional requirements.
    • Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
    • Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
    • Conduct system lab testing and aircraft functional testing.
    • Prepare presentations on avionics system design/development status.
    • Support system analyses for avionic systems.

    The Structures Company is an AA/EOE.
     
    Job Number: 361
    Job Location: NC
    Rate: Up to $150K **DOE**
    Duration: DIRECT POSITION
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DaDT Stress Analysis Engineer

    Description:
    Seeking a first-rate aerospace Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing as well as strong proven Fatigue and Damage Tolerance experience. The stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into product lifecycle manager.

    Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

    Your Mission

    Responsibilities:
    • Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
    • Develops standardized analysis criteria and templates
    • Plays an integral role in the work flow release process for all structural designs
    • Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
    • Supports the creation of structural test plans which will be used to verify manufacturing

    What You Bring
    Basic Qualifications

    • Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
    • Strong knowledge and understanding of Durability and Damage Tolerance Analysis on both Metallic and Composites components.
    • Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
    • Minimum 7 years of applicable experience in the analysis of structural systems using strength of materials, finite element based methods and DaDT analysis.
    • Experience with free-body diagrams and strong understanding of Solids Mechanics and Fracture Mechanics as well as classical stress analysis techniques
    • Excellent verbal and written communication skills
    • Excellent organizational and problem-solving skills
    • Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    • Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

    Preferred Skills and Experience
    • Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
    • Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    • Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    • Experience with manufacturing-based ERP systems, such as Oracle, is a plus

    The Structures Company is an AA/EOE.
     
    Job Number: 367
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Deceleration Engineer

    Description:
    Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

    Duties:
    Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

    The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

    Essential Job Functions (Including % of Time for Each):
    50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
    15% - Parachute Design and Loads Analysis.
    40% - Parachute/Extraction System Modeling and Simulation updates.
    35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
    10% - Oversee field installation and testing of Parachute design.

    Skills:
    REQUIRED:
    1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
    2. B.S. in Aerospace, Mechanical, or equivalent degree.
    3. Prior experience with 6DOF simulation of deceleration systems.
    4. Prior experience with Computational Fluid Dynamics (CFD) software.
    5. Ability to program and use MATLAB/Simulink.
    6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

    DESIRED:
    1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
    2. Experience working with deceleration systems.
    3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
    4. Working knowledge of aircraft/missile dynamics and control.
    5. Experience with air drops from military aircraft.
    6. Active DoD Secret Clearance.
     
    Job Number: 12119
    Job Location: Orlando, FL
    Rate: $38.00/HR
    Per Diem: N/A
    Overtime: Possible
    Duration: Direct Hire
    Start Date: ASAP
    Input Date: 01/03/2021
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Delegated Organization Process Specialist

    Description:
    We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

    Responsibilities of the Delegated Organization Process Specialist
    Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
    Propose and execute on process improvement opportunities.
    Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
    Educate impacted parties on system changes and upgrades.
    Support changes to JCAB requirements to facilitate all system improvements.


    Requirements of the Delegated Organization Process Specialist

    10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
    Significant experience with process development/improvement
    Strong knowledge of global certification requirements and compliance standards.
    Experience interfacing with regulators to support certification activities.
    Fluent in English, with Japanese language capabilities a bonus.
    Previous experience in as an aviation authority employee or delegate is beneficial.
     
    Job Location: Japan
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11964
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
    4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    7. Design Engineer will be required to liaison with the shop on engineering issues.
    8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
    9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 11965
    Job Location: Savannah, GA
    Rate: $55.00 - $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design / Mechanical Engineer - Completions Aircraft Interiors

    Description:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    Design Engineer will be required to liaison with the shop on engineering issues.
    Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 148594
    Job Location: Savannah, GA
    Rate: $55/hr to $58/hr
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer - Solidworks

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: Indianapolis, IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer - Wing and Engine Anti-Ice

    Description:
    General Summary:
    The Contingent Designer Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
    2. Prepare 3D installation arid detail models of the Wing and Engine Anti-ice Systems.
    3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.


    Education, Work Experience, Certification and/or Licensure:
    5. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.
    Must Haves:
    Aircraft anti-ice design experience
    Part 23/25 aircraft experience
    Catia V5 3D/2D experience
    Degree preferred


    The Structures Company is an AA/EOE.
     
    Job Number: 370
    Job Location: NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design/Engineer - Mechanical Interiors

    Description:
    Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

    Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
     
    Job Number: 20-149926
    Job Location: WI
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Designer - AutoCAD and Inventor

    Description:
    • Prepare and revise technical drawings for aircraft interior components and cabin layouts using Autocad 2010 and later (2D) and Autocad Inventor (3D)
    • Prepare technical component drawings, applying GD&T as well as developing BOM’s.
     
    Job Number: 20-839
    Job Location: Midwest
    Overtime: Possible
    Duration: 6 months +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Capitol Logic & Harness XC

    Description:
    Unique Skills:
    1. Mentor Graphics Capitol Logic and Harness XC experience required.
    2. Catia V5 experience preferred.
    3. 14 CFR 25 Subpart H - EWIS based design experience required.
    4. Completions electrical system design experience preferred.
    5. Part 25 Certification experience for cabin interiors preferred.
    6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    7. Experience with power distribution, lighting, switching, and harness routing required.
    8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    9. Familiarity with aircraft STC procedures preferred.
    10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
    11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11995
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 20-150866
    Job Location: Savannah, GA
    Per Diem: Split
    Overtime: Possible
    Duration: $60-$65 per hour
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Unique Skills:

    Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
     
    Job Number: 131981
    Job Location: Savannah,, GA
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin communication, security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Catia V5 basic navigation experience.
    • Company electrical system design experience.
    • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    • EWIS Certification familiarity & experience preferred.
    • Familiarity with aircraft STC procedures preferred.
    • Experience with electrical systems test plans and reports.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-387
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.


    Education and Experience Requirements:

    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: GA
    Rate: $60.60
    Per Diem: Possible
    Overtime: Possible
    Start Date: Long Term
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication, security and entertainment systems.
    3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12142
    Job Location: Savannah, GA
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Quality Engineer

    Description:
    - Analyze electrical designs created in AutoCAD and Capital Harness
    - Clearly document quality findings to design team and collaborate on issue resolution
    - Analyze electrical harness routing created using CATIA V5 EHI

    The ideal candidate will have experience in the following:
    - General CATIA V5 experience is required
    - Electrical Engineering degree strongly preferred
    - EWIS experience strongly preferred
    - Aircraft interiors electrical engineering design and/or quality experience is preferred
    - Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred
    - Experience with systems development, layout, logic, and wiring diagram creation is preferred
    - Experience with power distribution, lighting, switching, wire sizing and routing is preferred
     
    Job Number: 149042
    Job Location: Savannah, GA
    Rate: $58/hr to $63/hr
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Design Quality Engineer

    Description:
    Unique Skills:
    1. Candidate will be performing quality checks on electrical designs in support of our client's Completions.
    2. At a minimum, the candidate will:
    a. Analyze electrical designs created in AutoCAD and Capital Harness.
    b. Clearly document quality findings to design team and collaborate on issue resolution.
    c. Analyze electrical harness routing created using CATIA V5 EHI.

    The ideal candidate will have experience in the following:
    1. General CATIA V5 experience is required.
    2. Electrical Engineering degree strongly preferred.
    3. EWIS experience strongly preferred.
    4. Aircraft interiors electrical engineering design and/or quality experience is preferred.
    5. Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred.
    6. Experience with systems development, layout, logic, and wiring diagram creation is preferred.
    7. Experience with power distribution, lighting, switching, wire sizing and routing is preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11997
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    As part of the Completions Engineering Electrical Definition Team:
    • Define and create Build Lists of interior components for aircraft
    • Evaluate customization requests for engineering and manufacturing feasibility
    • Analyze models to determine asset re-use or new custom engineering requirements
    • Support evaluation and determination of certification strategy of aircraft
    • Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    • CATIA V5 / SmarTeam preferred
    • Experience using CHS/EHI tools a plus

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-375
    Job Location: Savannah, GA
    Rate: $72-$77/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12014
    Job Location: Savannah, GA
    Rate: $53.17 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    As part of the Completions Engineering Electrical Definition Team:
    1. Define and create Build Lists of interior components for G500 / G600 aircraft
    2. Evaluate customization requests for engineering and manufacturing feasibility
    3. Analyze models to determine asset re-use or new custom engineering requirements
    4. Support evaluation and determination of certification strategy of aircraft
    5. Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
    6. CATIA V5 / SmarTeam preferred
    7. Experience using CHS/EHI tools a plus

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12015
    Job Location: Savannah, GA
    Rate: $71.43 - $76.98/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
    2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
    4. Experience with systems development, layout, logic and wiring diagram creation.
    5. Familiarity in mechanical system design.
    6. Analyze Electrical designs in 3D models.
    7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

    Preferred candidate will have:
    1. Catia V5 basic navigation experience.
    2. GV, GVI, & GVII electrical system design experience.
    3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    4. EWIS Certification familiarity & experience preferred.
    5. Familiarity with aircraft STC procedures preferred.
    6. Experience with electrical systems test plans and reports.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12016
    Job Location: Savannah, GA
    Rate: $59.52 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-377
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    • AutoCad, Capitol Harness &/or Mentorgraphics required
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, wire sizing and routing.
    • Experience with systems development, layout, logic and wiring diagram creation.
    • Familiarity in mechanical system design.
    • Analyze Electrical designs in 3D models
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
    • Preferred candidate will have:
    o Catia V5 basic navigation experience.
    o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    o EWIS Certification familiarity & experience preferred.
    o Familiarity with aircraft STC procedures preferred.
    o Experience with electrical systems test plans and reports.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-376
    Job Location: Savannah, GA
    Rate: $55-$60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Completions

    Description:
    Required Skills:
    AutoCad, Capitol Harness &/or Mentorgraphics required
    Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    Experience with power distribution, lighting, switching, wire sizing and routing.
    Experience with systems development, layout, logic and wiring diagram creation.
    Familiarity in mechanical system design.
    Analyze Electrical designs in 3D models
    Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
    Catia V5 basic navigation experience.
    GV, GVI, & GVII electrical system design experience.
    14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
    EWIS Certification familiarity & experience preferred.
    Familiarity with aircraft STC procedures preferred.
    Experience with electrical systems test plans and reports.


    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 148781
    Job Location: Savannah, GA
    Rate: $59/hr to $65/hr
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Data Processing Engineer - Clearance CA

    Description:
    167091 Job Title: Electrical Engineer / Data Processing Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2677-1
    Max Pay Rate: $90.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
    The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

    Tasks include:
    • Receive, process and troubleshoot IRIG 106 formatted data products per established processes
    • Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
    • Diagnosis and resolution of problems encountered in the recovery of test data
    • Support IT assignments as required

    At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Desired skills
    The ideal candidate possesses:
    • Experience with IT infrastructure operations, computer networking, and/or software programming concepts
    • Experience in data processing and network system administration
    • Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
    • Programming in C/C++
    • Certification
    • Subject Matter Expert in data collection systems
    • Experience working with the application Common Data Processing
    • Experience with installation of Network Server systems for data processing
    • Experience working in flight test
    • Hardware and/or software programming experience
    • Understanding of IRIG 106
    • Experience with various instrumentation vendors hardware and software
    • Symvionics IADS (Interactive Analysis and Display System) use and programming
    • Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
    • Demonstrated ability to develop and implement process improvement initiatives
    • Excellent communication skills
    • Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

    Qty 1 position

    This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
     
    Job Number: JE-2677-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167083 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2678-1
    Max Pay Rate: $100.00/hr
    Start Date: 11/22/2019
    End Date: 2/9/2021
    Position Type: Contract

    Job Summary:
    Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

    Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

    The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

    This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Basic Qualifications
    • Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
    • Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
    • Experience developing data acquisition systems for air vehicles

    Experience with the following:
    - Microsoft Office
    - Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

    Desired skills
    • Using various CAD programs such as Catia, Autocad, etc.
    • Using general test equipment such as oscilloscopes and spectrum analyzers.
    • Understanding of IRIG 106
    • Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
    • GPS and IRIG time standards
    • Video protocols and compression

    The applicant must have excellent organizational and communications skills
    • Applicant should have knowledge of Systems Engineering practices and concepts
    • Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
    • Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
    • Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

    Qty 2 positions
     
    Job Number: JE-2678-1S
    Job Location: Palmdale, CA
    Rate: 100/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer / Instrumentation Engineer - Clearance CA

    Description:
    167093 Job Title: Electrical Engineer / Instrumentation Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2657-1
    Max Pay Rate: $90.00/hr M
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Responsible for performing pre-flight of aircraft instrumentation.

    Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    - Analog and digital circuit design and analysis.
    - Signal conditioning, transducers, and data acquisition.
    - Ability to interpret electrical drawings.
    - Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
    - Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
    - CATIA, CCD, AutoCAD or similar design tools.
    - Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
    - Microprocessor firmware design and embedded system design
    - Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
    - Flight test instrumentation protocols and standards
    - GPS and IRIG time standards
    - Real time and post test data processing Flight Test Experience
    - Proficient communication skills

    Qty 2 positions
     
    Job Number: JE-2657-1S
    Job Location: Palmdale, CA
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Design - Completions

    Description:
    1) Electrical Harness Installation (EHI) design experience required.
    2) Catia V5 experience required.
    3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4) 14 CFR 25 Subpart H - EWIS based design experience required.
    5) Completions electrical system design experience preferred.
    6) Part 25 Certification experience for cabin interiors preferred.
    7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8) Experience with power distribution, lighting, switching, and harness routing required.
    9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10) Familiarity with aircraft STC procedures preferred.
    11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


    Education and Experience Requirements:

    1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-369
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Design Engineer

    Description:
    Unique Skills:
    1. Electrical Harness Installation (EHI) design experience required.
    2. Catia V5 experience required.
    3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4. 14 CFR 25 Subpart H - EWIS based design experience required.
    5. Completions electrical system design experience preferred.
    6. Part 25 Certification experience for cabin interiors preferred.
    7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8. Experience with power distribution, lighting, switching, and harness routing required.
    9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10. Familiarity with aircraft STC procedures preferred.
    11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11994
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Design Engineer-Completions

    Description:
    1) Electrical Harness Installation (EHI) design experience required.
    2) Catia V5 experience required.
    3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
    4) 14 CFR 25 Subpart H - EWIS based design experience required. 5) Completions electrical system design experience preferred. 6) Part 25 Certification experience for cabin interiors preferred.
    7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
    8) Experience with power distribution, lighting, switching, and harness routing required.
    9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    10) Familiarity with aircraft STC procedures preferred. 11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 149203
    Job Location: Savannah, GA
    Rate: $58/hr to $63/hr
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Integration Engineer

    Description:
    POSITION SUMMARY:
    The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Provide engineering design and analysis of electrical systems and components.
    2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
    3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
    4. Work experience with EWIS standard design and wire separation requirements.
    5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
    6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
    7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
    9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
    10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
    11. Develops and implements engineering modifications and retrofits to completions in progress.
    12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
    13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    14. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
    2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with SolidWorks.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
    4. Aviation background and experience with electrical systems.
    5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
    6. Strong knowledge of industry electrical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
    9. Requires reasoning/analytical skills to creatively design and problem solve.
    10. Strong communication and problem-solving skills.
    11. Strong time-management and organizational skills.




    The Structures Company is an AA/EOE.
     
    Job Number: 347
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Avionics Engineer

    Description:
    Position Summary:

    Design complex, standard or custom, electrical and avionics integration installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

    This assignment is expected to be approximately 12-18 months in duration.

    Primary Responsibilities:

    Detail Design: 50%
    Create detail/assembly/installation wiring diagrams and power distribution schematics for new helicopter completions and STC projects.
    Review and facilitate engineering package release.
    Works with groups of engineers to complete projects.
    Works under general supervision from the Engineering Manager
    Follows established procedures
    Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
    Project Coordination: 20%
    Coordinates essential information into the configuration management system listing electrical and avionics installations for each aircraft unit produced by AHI
    Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
    Engineering Support: 20%
    Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
    Act as liaison to manufacturing and production efforts as needed.
    Support installation, functional and operational tests, and ground and flight tests.
    Structural Substantiation: 10%
    Performs preliminary electrical load analysis in support of initial layout and design concept.
    Additional Responsibilities:

    Other duties as assigned.
    Qualified Experience / Skills / Training:

    Education:

    Required:

    Bachelor's degree in Aeronautical or Electrical Engineering from an accredited college/university or equivalent experience
    Experience:

    Required:

    Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
    Preferred:

    Minimum one (1) year of helicopter design and integration.
    Licensure/Certifications:

    Required:

    NA
    Preferred:

    N/A
    Knowledge, Skills, Demonstrated Capabilities:

    Required:

    Knowledge of aviation/aerospace electrical design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
    Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

    Must be able to communicate effectively in the English language (verbal and written).
    Conversational French and/or German is a plus.
    Technical Systems Proficiency:

    Must be proficient with Microsoft Office Suite programs.
    Familiarity with AutoCAD and SAP programs
    Travel Required:

    5%
    Minimal domestic and International travel is required.
    Citizenship:

    US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
     
    Job Location: TX
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Tracey Hill
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded S/W Engineer - Clearance GA

    Description:
    2884-1 Embedded S/W Engineer
    Work Location: Marietta, GA
    Status: Open

    Qty: 1
    Desired Start Date: 1/29/2020
    End Date: 1/19/2021

    Job Description:
    Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

    Required
    - Experience in the use of Windows and Unix Operating Systems.
    - 4+ years experience of software development in high order languages (C++, Java and/or Ada).
    - Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

    Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
    Pay Rate: $72.00 Hourly
     
    Job Number: JE-2884-1S6
    Job Location: Marietta, GA
    Rate: 72/hr max
    Per Diem: pd split possible
    Duration: 1 year plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue & Damage Tolerance Engineers Needed

    Description:
    3 Fatigue and DaDT Engineers Needed. MUST BE US PERSONS.
    Target Rate: $80-85/hr but could pay more for the right candidates.
    Must have composites experience.

    -Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline
    -Strong knowledge and understanding of Durability and Damage Tolerance Analysis on both Metallic and Composites components.
    -Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
    -Minimum 7 years of applicable experience in the analysis of structural systems using strength of materials, finite element based methods and DaDT analysis.
    -Experience with free-body diagrams and strong understanding of Solids Mechanics and Fracture Mechanics as well as classical stress analysis techniques
    -Excellent verbal and written communication skills
    -Excellent organizational and problem-solving skills
    -Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    -Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

    Preferred Skills and Experience
    -Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
    -Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    -Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    -Experience with manufacturing-based ERP systems, such as Oracle, is a plus

    The Structures Company LLC is an AA/EOE
     
    Job Location: Mojave, CA
    Rate: $80-85/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Law Team Leader

    Description:
    We are seeking a seasoned Flight Control Engineering with successful leadership experience to fill a lead role for an aerospace company located in Nagoya, Japan. Interested candidates should have over 10 years of flight control/dynamics experience as well as senior aerospace program leadership skills.

    Responsibilities of the Flight Control Law Team Leader

    Manage the team with specialized technical background and knowledge regarding Control Laws Design, Verification and Certification.
    Planning, managing and controlling of Control Law design related activities, Desktop Simulations related activities, Manned Simulations related activities, Flight Test related activities, Validation and Verification related activities, including interaction with the pilot community.
    Support to integration activities with other areas of the organization including Flight Control Systems, Aeroelastics and Loads.
    Preparation of documentation to support Certification and if requested, coordination with authorities (JCAB, EASA, FAA).
    Support to Auto-Land and Auto-Pilot Systems and/or activities related to other derivative aircrafts.

    Requirements of the Flight Control Law Team Leader

    15 plus years of aircraft Flight Control and Flight Dynamics experience.
    Previous Leadership experience required.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    Excellent verbal and written communication skills in English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer - Clearance CA

    Description:
    Engineering - Flight Controls Engineer

    Work Location: Edwards AFB
    Status: Open
    Qty: 1
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    Support Flight Sciences testing for the F22 Raptor. Provide on-site support for F22 flight test at Edwards AFB, CA. Monitor loads, flying quality, propulsion, utility, and subsystems. Monitor aircraft in the control room to verify safe flight test operations. Verify Instrumentation is working correctly in support of flight test missions. Collect and review flight test data. Support ground testing of various F22 components such as external stores pylon calibrations. Write documentation describing flight and ground test results. A BS degree in Engineer is required (prefer Aeronautical Engineering) with five to eight years of one of the specific loads, flying quality, propulsion, utility, and subsystems areas. The applicant must be able to attain specific program accesses for performing this job.

    - Aircraft flight test knowledge.
    - Flight Sciences background (Structures, Propulsion, Flying Qualities or Utilities & Subsystems.
    - Data analysis skills.
    - Computer skills to include MS Excel, Word, and MATLAB.
    - Familiar with Edwards AFB flight operations.
    - Familiar with Air Force Test Center processes.
    - Ability to interface with management personnel & team members.
    - Flight test experience.

    Work Location: Palmdale, CA
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $85.00 Hourly

    Work Schedule: 9/80-A
     
    Job Number: JE-2656-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

    Description:
    166860 Job Title: Flight Controls Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2648-1
    Max Pay Rate: $85.00/hr
    Start Date: 12/2/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

    This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
    (1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
    (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
    (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
    (4) coordinate as required with other organizations associated with test readiness.

    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.

    Desired Skills
    (F-16 experience is highly preferred / F-22 & F35 experience desired)
    Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired.
    -Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


    Qty 4 positions

    Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
    Work location is Edwards AFB
     
    Job Number: JE-2648-1S
    Job Location: Edwards AFB, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations / URGENT - Clearance MD

    Description:
    Flight Operations
    Work Location: Patuxent River, MD - RMS
    Status: Open

    Qty: 5
    Desired Start Date: 12/9/2019
    End Date: 2/26/2021

    Job Description:
    The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

    -The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

    -The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

    -The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

    -Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

    Basic Qualifications
    -Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

    Desired skills
    -Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

    -Computer programming experience.
    -MATLAB experience.
    -Proficiency with Microsoft Office suite (Word, Powerpoint,
    Excel, Outlook) and Microsoft Windows operating system.
    -Works well within a team and possesses good written and verbal communication skills.

    CNE Work Location: Fort Worth, TX
    Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
    Pay Rate: $74.00 Hourly
     
    Job Number: LMRMS-2699-1S
    Job Location: Patuxent River, MD
    Rate: 74/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail
     
    Job Number: 20-148303
    Job Location: Southeast
    Rate: $70.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Unique Skills:
    Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    Experience executing test procedures onboard experimental fixed wing test aircraft
    Experience performing analysis of post flight data to determine pass/fail

    Education and Experience Requirements:
    Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
    Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
    Flight Test Engineer Certification may offset one year of experience requirement.


    Position Purpose:
    Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
    2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
    3. Work with engineering and test pilots to define test points that are conducted on test aircraft
    4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
    5. Definition of the aircraft configuration to support the on aircraft test
    6. Tracks test points and updates pass/fail/repeat status
    7. Supports on aircraft ground/flight testing as required.
    8. Provides the judgment on acceptable test data during or post flight
    9. Processing of data following a test flight to document test results
    10. Development of flight test reports to show compliance with test requirements
    11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
    12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
    13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
    14. Conducts flight test brief with flight ops and engineering
    15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
    16. Generates and transmits post flight test summary
    17. Conducts debrief of test mission with test crew and engineering
     
    Job Number: 148303
    Job Location: Savannah, GA
    Rate: $55/hr to $70
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Unique Skills:
    • Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
    • Experience executing test procedures onboard experimental fixed wing test aircraft
    • Experience performing analysis of post flight data to determine pass/fail

    Essential Functions:
    • Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
    • Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
    • Work with engineering and test pilots to define test points that are conducted on test aircraft
    • Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
    • Definition of the aircraft configuration to support the on aircraft test
    • Tracks test points and updates pass/fail/repeat status
    • Supports on aircraft ground/flight testing as required.
    • Provides the judgment on acceptable test data during or post flight
    • Processing of data following a test flight to document test results
    • Development of flight test reports to show compliance with test requirements
    • Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
    • Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
    • Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
    • Conducts flight test brief with flight ops and engineering
    • Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
    • Generates and transmits post flight test summary
    • Conducts debrief of test mission with test crew and engineering

    Education and Experience Requirements:
    • Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
     
    Job Number: 24-378
    Job Location: Savannah, GA
    Rate: $55-$70/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
    2. Experience executing test procedures onboard experimental fixed wing test aircraft.
    3. Experience performing analysis of post flight data to determine pass/fail.

    Education and Experience Requirements:
    1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
    3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
    4. Flight Test Engineer Certification may offset one year of experience requirement.

    Position Purpose:
    1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
    2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
    3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
    4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
    5. Definition of the aircraft configuration to support the on aircraft test.
    6. Tracks test points and updates pass/fail/repeat status.
    7. Supports on aircraft ground/flight testing as required.
    8. Provides the judgment on acceptable test data during or post flight.
    9. Processing of data following a test flight to document test results.
    10. Development of flight test reports to show compliance with test requirements.
    11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
    12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
    13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
    14. Conducts flight test brief with flight ops and engineering.
    15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
    16. Generates and transmits post flight test summary.
    17. Conducts debrief of test mission with test crew and engineering.

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    4. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12036
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering:
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
    • Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements
    • Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-390
    Job Location: Savannah, GA
    Rate: $60-65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

    Unique Skills:
    As part of the Completions Engineering Mechanical Definition Team:
    • Define and create Build Lists of interior components for aircraft
    • Evaluate customization requests for engineering and manufacturing feasibility
    • Analyze models to determine asset re-use or new custom engineering requirements
    • Support evaluation and determination of certification strategy of aircraft
    • Experience in designing aircraft Interior Furnishings preferred
    • CATIA V5 / SmarTeam preferred

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-383
    Job Location: Savannah, GA
    Rate: $60-$65/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-367
    Job Location: Savannah, GA
    Rate: $58-$63/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Position Purpose:
    • Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-368
    Job Location: Savannah, GA
    Rate: $55-$58/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Interiors Design Engineer

    Description:
    Position Summary:
    Seeking an experienced design engineer that has experience in the interior completions industry who has lead teams of modelers/interior designers on fast paced completions projects. This person does not have to have Solidworks experience.


    • Must have experience as a lead engineer
    • Must have Aircraft Interior Completions experience.
    • Must have a strong background utilizing CATIA, AutoCAD or Solidworks
    • Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
    • Must have 3D modeling experience


    The Structures Company is an AA/EOE.
     
    Job Number: 355
    Job Location: IN
    Rate: $65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Stress Analyst

    Description:
    Summary Statement:

    Applies expert and specialized knowledge to contribute to the development of new techniques and concepts related to the design, development, testing, manufacturing and certification of aircraft structures, component parts and related component systems and subsystems for operational aircraft. Recognized as the resident expert in the engineering discipline within the Company.

    • System stress analysis background
    • EBU experience specifically
    • 10+ years of stress analysis experience
    • Having lead experience is not necessary, but being a senior role is.
    • Managing internal stress analysis tools is required………guides, FEA tools, databases, etc.
    • Will be managing 8 internal employees and a sizeable offshore team.
    • Will have to travel to Savannah, Toulouse, France and Hartford, CT.
    • Bachelor level degree in appropriate engineering discipline, master level degree preferred,



    The Structures Company is an AA/EOE.
     
    Job Number: 364
    Job Location: Tulsa, OK
    Rate: $100-$130K **DOE***
    Duration: ***DIRECT POSITION***
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Weight Engineer

    Description:
    We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

    Responsibilities of the Lead Weight Engineer​

    Aircraft weight reduction activity and design weight growth study.
    Certification activity related to weight and C.G.
    Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
    Checking the status and forecast of aircraft weight and C.G.
    Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
    Designing weight growth plans.
    Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
    Preparation of weight and balance manual.
    Improvements of weight data gathering and verification process.

    Requirements Lead Weight Engineer

    15 plus years of aircraft certification experience in relation to weight and center of gravity.
    Extensive flight test experience.
    Previous Leadership experience required.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    Excellent verbal and written communication skills in English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison Stress Engineers - Commercial or Military Aircraft

    Description:
    We are looking for Stress Analysts / Stress Engineers who have a background doing Liaison support on structural repair/maintenance of in-service aircraft structures and components.
    MUST BE US PERSONS
    Must have:
    BS degree
    Airframe Structural Analysis experience
    Extensive Classical Analysis background required

    Develops and provides engineering solutions for the overhaul and repair of large transport aircraft structural components, requiring a sound knowledge of the principles, theories, and concepts that are consistent with Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) regulations. Technical foundation to perform approvals of single and multi-use repair packages, and manage product center workflow and schedules,. Manage projects and special assignments with little to no supervision. May function as a team lead for less experienced engineers.

    Essential Functions and Key Responsibilities:

    Reviews damage reports to develop repair schemes, authors work instructions, and performs the stress analysis and substantiation supporting the repair with no supervision. Repair development and substantiation will include a variety of analysis methods and require an established knowledge of mechanically fastened metallic structure, adhesively bonded metallic structure, composite structure, welding, and brazing. Developed repairs must be substantiated to meet or exceed the original design certification requirements.

    Established knowledge of, and ability to apply repair analysis techniques such as Boeing Structures I and II, ABARIS/Laminate Plate Theory, Bruhn, Flabel, ETC. Develops and substantiates complex repair schemes with no supervision.

    Working knowledge of FAA and EASA regulations, AD’s, NPRM’s, AC’s, AMC’s, SDR’s, EWIS, etc. Other aviation authority knowledge such as CAAC/JAA/JCAB is a plus.

    Performs technical review and approval of less experienced engineer’s repair packages.

    Mentoring less experienced engineers, co-ops, and interns and may be responsible leading direct reports.

    Manages projects and/or product centers with little to no supervision.

    Develop and/or peer review multi-use repair specifications, drawings, and engineering reports.

    Review and interpret technical documents such as Drawings, Structural Repair Manuals (SRM’s), Component Maintenance Manuals (CMM’s), Illustrated Parts Lists (IPL’s/IPC’s), Material Specifications, Process Specifications, etc.

    Develop and/or approve repair data packages and obtain FAA approvals through internal and external FAA Designated Engineering Representatives (DER’s).

    Communicate and interact with Airbus and Boeing engineering for repair development support, as well as coordinate customer engineering approvals of developed repair schemes.

    Troubleshoot failure modes and interact with shop mechanics to develop cost effective repairs that are feasible to accomplish in a timely manner that supports production schedule.

    Above average verbal and written skills, ability to tailor communication to technical and non-technical audiences.

    The Structures Company is an AA/EOE.
     
    Job Location: OK
    Rate: ***DOE***
    Duration: ***DIRECT POSITION***
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Project Manager (VH-92A, VH-3D and VH-60N Aircraft)

    Description:
    The ideal candidate will drive project management for technical and process improvement projects.

    Responsibilities include:
    • Developing Productivity Tools
    • Managing Documentation
    • Tracking Schedules.

    This candidate will be responsible for Logistics Projects with significant scope and complexity.

    Required Skills
    • Must possess the knowledge, skills, and abilities to work independently with minimum oversight
    • Management of logistics proposal activities including the flow down of proposal requirements and the planning, execution, and delivery of high-quality logistics elements / spares deliveries under contract
    • Development and management of schedules and budgets for all logistics activities will be required.
    • Interact with supply chain, op-centers and internal and external customers on a regular basis, including the development and presentation of logistics material at formal meetings.

    Desired Skills
    • Technical experience and knowledge of the VH-92A, VH-3D and VH-60N model aircraft is desirable
     
    Job Number: 2010111727
    Job Location: Stratford, CT
    Per Diem: split
    Overtime: possible
    Duration: 1.5 years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Looking for Wire Design Engineer in OK, MO states

    Description:
    Multiple Positions Below

    1. Wire Design & Install Engr 5

    Location: Hazelwood, MO
    Duration: 5+ Months

    Description:
    The QF-16 team is responsible for the design and installation of Drone Peculiar Equipment (DPE) to convert retired USAF F-16's into Full Scale Aerial Targets. This role leads all wire harness design activities from schematic wire diagram definition through cable/harness definition. This position supports fielded aircraft as well as two active production lines. The candidate will apply their electrical design background to troubleshoot issues with fielded aircraft, provide technical guidance to supplier management, and provide design support to the production lines. The primary role for this position is to develop the QF-16 electrical design baseline in accordance with new business opportunities.

    Typical Education/Experience:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

    Primary responsibilities:
    - Develops and maintains cable/wire harness detail and assembly designs.
    - Analyzes results and performs design reviews.
    - Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
    - Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests).
    - Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
    - Develops basic statements of work.
    - Participates in technical review of supplier capabilities to facilitate source selection.
    - Analyzes functional and physical input to assure development of complete integrated design.

    Basic Qualifications:
    - This position requires the ability to obtain a US Security Clearance.
    - 10+ years of experience designing the fabrication of wire harness/cables.
    - 5+ years of experience in a leadership role, leading teams or projects to successful completion.

    Preferred Qualifications:
    - Familiarity with Teamcenter Engineering.
    - Ability to interrogate models in Unigraphics (NX).
    - Experience communicating with customers and suppliers.
    - Experience with aircraft modification design.

    Education / Experience:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Skill Code: 601-Wire Design & Install Engr-General





    2. Wire Design & Install Engr 5

    Location: Oklahoma City, OK
    Duration: 6+ Months

    Description:
    Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
    OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

    This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

    Other Job Responsibilities May Include:
    - Provides guidance in the development of cable/wire harness detail and assembly designs.
    - Provides guidance in the development of electrical product detail, assembly and installation designs.
    - Provides direction used by multiple teams to analyze complex results and performs design reviews.
    - Provides guidance in engineering design disposition on discrepancies.
    - Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
    - Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
    - Directs the technical review of supplier capabilities to facilitate source selection.
    - Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
    - Works under consultative mentorship.

    Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    Basic Qualifications (Required Skills and Experience):
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Skill Code: 652-Wiring Design





    3. Wire Design & Install Engr (Level 3, 4, 5)

    Location: Tukwila, WA
    Duration: 6+ Months

    Description:
    Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
    Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

    Position Responsibilities:
    - Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
    - Using design tools prepares documentation and incorporates design changes.
    - Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
    - Supports engineering system design and functionality validation activities.
    - Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
    - Coordinates activities and products with internal partners and external suppliers.
    - Works under general direction.

    Basic Qualifications (Required Skills and Experience):
    - Designing or supporting electrical wire harness Installations
    - Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Preferred Qualifications (Desired Skills/Experience):
    - Active security clearance is preferred
    - Client Defense Experience preferred but not required

    Skill Code: 679-Electrical/Electronic Installation Design
     
    Job Location: Hazelwood, MO
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: Asap
    Input Date: 05/01/2023
    Last Updated: 08/10/2023
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    M&P Engineer

    Description:
    Description
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledge of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus

    The Structures Company LLC is an AA/EOE
     
    Job Location: Mojave, CA
    Rate: $65-90/hr
    Per Diem: Yes
    Overtime: Tes
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2022
    Last Updated: 02/28/2023
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Kimberly Wade
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
     
    Job Location: Tulsa, OK
    Rate: $60/hr to $68/hr
    Per Diem: Possible
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
     
    Job Number: 138961
    Job Location: Tulsa, OK
    Rate: $64/hr to $68/hr
    Per Diem: No
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Engineer

    Description:
    Unique Skills:
    - Bachelors degree in aerospace or mechanical engineering.
    - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    - Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    - Familiarity with results of composite NDI/NDT methods required.
    - Experience should be in a Production and/or schedule-driven environment.
    - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    - Strong written/verbal communication and interpersonal skills.
    - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    - Typically a 40 hr work week, with some week/weekend OT a possibility.
    - Position is full-time at a supplier in Tulsa, OK

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Tulsa, OK
    Rate: Open
    Per Diem: No
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Vivek Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Structures Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Unique Skills:
    MRB Structures Engineer
    • Bachelors degree in Aerospace or Mechanical Engineering.
    • Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
    • Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    • Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
    • Experience should be in a Production and/or schedule-driven environment.
    • Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    • Strong written/verbal communication and interpersonal skills.
    • Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
    • Initially 1st shift. Occasional weekends expected. Transition to 2nd shift may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-398
    Job Location: Savannah, GA
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Structures Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Unique Skills:
    MRB Structures Engineer
    • Bachelors degree in aerospace or mechanical engineering.
    • Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
    • Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
    • Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
    • Familiarity with results of composite NDI/NDT methods required.
    • Experience should be in a Production and/or schedule-driven environment.
    • Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
    • Strong written/verbal communication and interpersonal skills.
    • Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    • Typically a 40 hr work week, with some week/weekend OT a possibility.
    • Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-399
    Job Location: Tulsa, OK
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB Systems Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Unique Skills:
    MRB Systems Engineer
    • Bachelors degree in aerospace or mechanical engineering.
    • Minimum 7 years Systems MRB Engineering experience at a recognized aerospace manufacturer.
    • Experience should include creation and justification of engineering dispositions related to composite nacelle systems.
    • Aircraft MRB Systems experience should include: ECS installations, Auxiliary mechanism verifications, assistance with movable component installation and rigging, Acceptance Test Procedure (ATP) deviations and resolution, installation and operational verification of nacelle components ( fixed cowl, hinged cowl doors, TR,etc.).
    • Experience should be in a Production and/or schedule-driven environment.
    • Strong written/verbal communication and interpersonal skills. Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
    • Typically a 40 hr work week, with some week/weekend OT a possibility.
    • Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-397
    Job Location: Tulsa, OK
    Rate: $66/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer (Aerospace Industry)

    Description:
    This candidate will:
    • manage high complexity design and planning of layout for assembly and materials handling.
    • Adapt machines or equipment design to factory and production conditions.
    • Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

    Candidates will support a work transfer project to India.

    Project scope includes:
    • baselining current processes,
    • implementation of corrective actions, and
    • related fixture design.

    Additional duties to include support of legacy product lines. Legacy lines include:
    • aircraft wipers,
    • video systems, and
    • electronic sub systems.

    Required Qualifications
    • Good interpersonal skills and be self-motivated.
    • Bachelor’s degree

    Desired qualifications:
    • Experienced Manufacturing Engineer capable in process design, work instruction creation and fixture design.
    • Experience in Aerospace Engineering
    • Proficiency in SAP, Teamcenter, CREO
     
    Job Number: 2010110561
    Job Location: Burnsville, MN
    Per Diem: split
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - 2nd shift - Clearance TX

    Description:
    Job Title: Manufacturing Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2670-1
    Max Pay Rate: $50.00/hr
    Start Date: 12/9/2019
    End Date: 2/26/2021
    Position Type: Contract

    Job Summary:
    The Flight Test Instrumentation Specialist is responsible for supporting the build, install/modification, and demodification of Instrumentation measurements and supporting equipment. This position will support instrumentation leadership and represented employees.

    Responsibilities include a broad range of oversite, including but not limited to, metal fabrication (CNC machining and sheet metal hand forming), electrical harness fabrication, structure and electrical install on aircraft, and maintenance and removal of instrumentation measurements and equipment on aircraft. This position requires strong team work skills, administrative, communication (written and verbal) and interpersonal skills. May be required to act as supervisor during supervision absence.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    -Experience in ONE of the following:
    -Metal fabrication experience
    -CNC machining experience
    -Harness fabrication and routing (install)
    -Flight Line/Aircraft modification experience

    Desired skills
    -Prior specialist experience
    -Excellent communication skills
    -Ability to work with varying levels of management across multiple organizations
    -SFM, PDM, EDMS
    -Experience working in a union environment

    Qty 1 position
    *This position is for 2nd Shift*
     
    Job Number: JE-2670-1S
    Job Location: Fort Worth, TX
    Rate: 50/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Shift: 2nd Shift

    Unique Skills:
    Previous Gulfstream experience working with live aircraft (G500 and G600 preferred).

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 12160
    Job Location: Savannah, GA
    Rate: $52.50/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Master Minimum Equipment List Specialist

    Description:
    We are seeking a Minimum Equipment List (MEL) Specialist with aircraft maintenance experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with aircraft operations as well as MMEL (Master Minimum Equipment List) development experience.

    Responsibilities of the MMEL Specialist

    Creation and execution of all MMEL development.
    Updating and creating MMEL justification analyses.
    Updating and creating Dispatch Deviations Guide maintenance and operational procedures.
    Coordinating MMEL and associated manuals’ contents with design and safety engineering and the customers.
    Planning, coordinating, observing MMEL validation and verification activities.
    Coordinating with aviation authorities (JCAB, FAA, and EASA) for MMEL approval throughout Flight Operation Evaluation Board review.
    Development a process of updating MMEL as well as monitoring the airline’s MEL operation, evaluating and updating the MMEL documentation process and authority approval process.
    Monitoring and supporting airline’s MEL operation after Entry Into Service.
    Updating and obtain authorities approval for future MMEL revisions.


    Requirements

    4 year engineering degree.
    Minimum 5 years of experience in Aircraft Maintenance or Operations.
    Minimum 3 years of MMEL development experience, including experience coordinating with airworthiness authorities and airlines regarding MMEL documentation.
    Knowledge of CS MMEL and FAA MMEL system (FOEB, Policy Letters, etc.).
    Airline support experience regarding MMEL/MEL.
    Excellent communication skills in English.
    Ability to travel domestically as well as internationally.
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer

    Description:
    We are looking for a Materials & Process Engineer in Mojave, CA.
    Composites experience is a MUST.
    MUST BE US Persons.

    Experience with composite material testing and processing is a necessity.
    Candidate must be familiar with ASTM testing, data analysis, and writing technical reports.
    Authoring of composite related processing specification is desired.
    Experience with structural adhesives and metallurgy is an added bonus.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: $55-80/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-Term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer

    Description:
    We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

    Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

    Duties:
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements:
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledgable of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


    The Structures Company is an AA/EOE.
     
    Job Number: 279
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Processes Engineer

    Description:
    Summary:
    As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

    On any given day you might:
    • Support building and lead the Materials and Processes team for the aircraft development
    • Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
    • Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
    • Perform trade studies, write proposals, and support new business development plans

    We're looking for someone who has:
    • Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
    • 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
    • 3+ years of experience leading technical resources and team
    • Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
    • Knowledge of composite certification and structural bonding requirements for Part 25 preferred
    • In-depth and current knowledge of Part 25 regulatory requirements
    • Demonstrated success in dealing and influencing internal and external stakeholders
    • Experience in engineering support of aircraft production line activities is desirable
    • Strong decision making and communication skills
    • Excellent problem-solving skills across multi-disciplinary skill sets
    • Experience in a global environment working with customers and suppliers

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-038
    Job Location: Reno, NV
    Rate: $75-$95/hr
    Per Diem: YES
    Overtime: Possible
    Duration: 1+Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanica Engineer/Designer - Interiors/Cabin Completions

    Description:
    Unique Skills:

    Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering: -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. - Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. -Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule. Preferred Skills: - Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements -Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
     
    Job Number: 131980
    Job Location: Savannah,, GA
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Unique Skills:
    1. Five (5) years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures.
    2. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or 15 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    2. Is consulted extensively by associates and others as a recognized authority within the field.
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    4. Approach to problem solving balances technical product, cost and schedule.
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12224
    Job Location: Savannah, GA
    Rate: $66.00 - $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Five years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 132070
    Job Location: Savannah,, GA
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    As part of the Completions Engineering Mechanical Definition Team:
    1. Define and create Build Lists of interior components for G500 / G600 aircraft
    2. Evaluate customization requests for engineering and manufacturing feasibility
    3. Analyze models to determine asset re-use or new custom engineering requirements
    4. Support evaluation and determination of certification strategy of aircraft
    5. Experience in designing aircraft Interior Furnishings preferred
    6. CATIA V5 / Smarteam preferred

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12120
    Job Location: Savannah, GA
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry into Service (EIS) team.
    2. Design responsibilities primarily involve creating engineering design solutions to issues found in fleet.
    3. These solutions will be incorporated in fleet and into new aircraft builds.
    4. Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
    5. Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
    6. Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
    7. Experience preparing and executing test plans.
    8. Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
    9. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    10. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and Smarteam.
    11. Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Thirteen (13) years specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Responsible for an entire engineering project of major complexity within established scope.
    2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities.
    3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge.
    4. Leads the development of innovative principles and ideas.
    5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements.
    6. Works under consultative direction; uses independent judgment to accomplish objectives.
    7. Develops standards and guides for diverse engineering activities.
    8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program.
    9. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12112
    Job Location: Savannah, GA
    Rate: $80.10/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry Into Service (EIS) team. Design responsibilities primarily involve creating engineering design solutions to issues found in fleet. These solutions will be incorporated in fleet and into new aircraft builds.

    Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
    - Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
    - Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
    - Experience preparing and executing test plans.
    - Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
    - Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.
     
    Job Number: 149936
    Job Location: Savannah, GA
    Rate: $70/hr to $79/hr
    Per Diem: Possible
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Entry into Service

    Description:
    Position Purpose:
    • Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Unique Skills:
    • Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry Into Service (EIS) team.
    • Design responsibilities primarily involve creating engineering design solutions to issues found in fleet.
    • These solutions will be incorporated in fleet and into new aircraft builds.
    • Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
    • Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
    • Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
    • Experience preparing and executing test plans.
    • Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Responsible for an entire engineering project of major complexity within established scope
    • Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    • Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    • Leads the development of innovative principles and ideas
    • Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    • Works under consultative direction; uses independent judgment to accomplish objectives
    • Develops standards and guides for diverse engineering activities
    • Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program

    Other Requirements:
    • Advanced degree in engineering or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-382
    Job Location: Savannah, GA
    Rate: $80/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer/Designer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering:
    1. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    2. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    3. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    4. Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections.
    5. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    6. Design Engineer will be required to liaison with the shop on engineering issues.
    7. Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    8. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Preferred Skills:
    1. Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements
    2. Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) years in specific technical discipline or Fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to two (2) years for Masters and four (4) years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
    2. Is consulted extensively by associates and others as a recognized authority within the field.
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
    4. Approach to problem solving balances technical product, cost and schedule.
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12150
    Job Location: Savannah, GA
    Rate: $60.00 - $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation. Actively develop engineering product improvements. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
     
    Job Number: 20-150232
    Job Location: $60-$65.00
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    • Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    • Actively develop engineering product improvements.
    • The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    • Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    • Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    • Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    • Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    • Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    • Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    • Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-380
    Job Location: Savannah, GA
    Rate: $60/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    3. Actively develop engineering product improvements.
    4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

    Education and Experience Requirements:
    1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12096
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    3. Actively develop engineering product improvements.
    4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    2. Ten (10) years in specific technical discipline or 15 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12094
    Job Location: Savannah, GA
    Rate: $65.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Unique Skills:
    • The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    • Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    • Actively develop engineering product improvements.
    • The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    • Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    • Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    • Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    • Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    • Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    • Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    • Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

    Principle Duties and Responsibilities:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

    Education and Experience Requirements:
    • Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Other Requirements:
    • Advanced degree in engineering related field preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-381
    Job Location: Savannah, GA
    Rate: $65/hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    Actively develop engineering product improvements.
    The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 150232
    Job Location: Savannah, GA
    Rate: $65/hr
    Per Diem: Possible
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Liaison Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
    2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
    3. Actively develop engineering product improvements.
    4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
    5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
    6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
    9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
    10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
    11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

    Education and Experience Requirements:
    1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12095
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    POSITION SUMMARY:
    Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

    • 5+ years of experience.
    • BS degree preferred
    • Must have ON THE JOB EXPERIENCE with Solidworks.
    • Preferably 5 years of experience from aircraft completions industry
    • Must have experience designing waste water systems as that carries the most importance.
    • They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
    • Must be self-sufficient and NOT require guidance.
    • It is preferred if they have experience with collaborating data in Solidworks.
    • Experience with report writing


    The Structures Company is an AA/EOE.
     
    Job Number: 340
    Job Location: IN
    Rate: $57-$65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    Unique Skills:

    Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification. Document creation and interior compliance experience preferred.


    Education and Experience Requirements:

    Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.


    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of business aircraft.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements
    Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
    Perform other duties as assigned.

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Location: GA
    Rate: $49.60 +
    Per Diem: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    We need a Mechanical Systems Engineer for our client in Indianapolis, IN. 6 Month Contract.

    Years of exp – 5+ years of experience.
    BS degree preferred
    Must have experience from aircraft completions industry
    Must have experience designing waste water systems as that carries the most importance.
    They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
    Must be self-sufficient and NOT require guidance.
    Must have strong experience with Solidworks.
    It is preferred if they have experience with collaborating data in Solidworks.
    Experience with report writing
     
    Job Location: IN
    Rate: $57 +
    Per Diem: Possible
    Duration: 6 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

    Unique Skills:
    • Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
    • Document creation and interior compliance experience preferred.

    Education and Experience Requirements:
    • Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    • 18 months of related Engineering experience.
    • Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Essential Functions:
    • Solves typical engineering problems within assigned discipline
    • Provides technical assistance to engineering staff and contributes to completion of project milestones
    • Responsible for a complex engineering assignment, or a full project of lesser complexity
    • Follows established schedules while developing plans for engineering assignments
    • Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    • Proficiently applies company/organization policies and procedures

    Other Requirements:
    • The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    • Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    • Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    • Ability to convey technical concepts in both written and verbal formats.
    • Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    • Works under general supervision for routine tasks of minor complexity.
    • With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 24-389
    Job Location: Savannah, GA
    Rate: $50-$55/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    Unique Skills:
    Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
    Document creation and interior compliance experience preferred.

    Education and Experience Requirements:
    Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
    18 months of related Engineering experience.
    Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.


    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture aircraft.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements
    Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
    Perform other duties as assigned.

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 150863
    Job Location: Savannah, GA
    Rate: $55/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
    2. Document creation and interior compliance experience preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

    Position Purpose:
    1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Solves typical engineering problems within assigned discipline.
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones.
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity.
    4. Follows established schedules while developing plans for engineering assignments.
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy.
    6. Proficiently applies company/organization policies and procedures.

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
    3. Perform other duties as assigned.

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
    4. Ability to convey technical concepts in both written and verbal formats.
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
    6. Works under general supervision for routine tasks of minor complexity.
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
     
    Job Number: 12144
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possiblw
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer

    Description:
    5 years’ experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier. *** Candidate must be US Persons. **
     
    Job Number: 20-152181
    Job Location: GA
    Rate: $70.00 per hour
    Duration: Long Term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
    2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
    3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
    4. Assist in developing and documenting standards for the handling and utilization of metrology equipment.
    5. Create standardized inspection reports through the utilization of Metrologic software.
    6. Study and optimize equipment performance for increased capacity and equipment efficiency.
    7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
    9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
    10. Coordinate the implementation of projects between multiple organizations.
    11. Support all Safety, Sustainability and Ergonomic Initiatives.

    Additional Functions:
    1. Work to improve daily processes, and ensures all work meets customer requirements.
    2. Assist tool shop as needed, during periodic and conformity Inspections.
    3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

    Other Requirements:
    1. Extensive knowledge of metrology equipment, software and current measurement techniques.
    2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
    3. Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 149441
    Job Location: Savannah, GA
    Rate: $50/hr to $55/hr
    Overtime: Yes
    Duration: Long term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer II

    Description:
    Location: Savannah, GA
    Rate:
    Duration: Long Term Contract
    Shift: 1st Shift
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    Experience with Gulfstream Engineering data preferred.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

    Position Purpose:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

    Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

    Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
     
    Job Number: 11978
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Specialist

    Description:
    Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

    Key Components of position
    • Hands‐on Tooling assembly
    • Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
    • Must be able to lift 50 lbs.
    • Utilizing CAD or 3D software for inspection (one or more of the following):
    o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
    • Metrology
    • Working with laser trackers or similar positioning systems

    Professional requirements for position
    • Hands on experience in setup of large scale precision fixtures or tooling
    • Excellent Organizational Skills and problem-solving skills
    • Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
    • Strong team player
    • Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
    • Must be able to take direction well and is a strong team player.
    • Extreme attention to detail and continual pursuit of perfection.
    • Excellent listening and communication skills.
    • Ability to maintain composure in high pressure situations
    • Excellent organizational skills and problem-solving skills.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 507
    Job Location: Mojave, CA
    Rate: $60-$85/Hr. **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 06/14/2022
    Last Updated: 07/22/2022
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MetrologyTech

    Description:
    Metrology Tech performs technical work related to the gathering of highly accurate 3 dimensional data used to set up aircraft tooling and perform measurement studies on in-process or completed aircraft.



    Metrology Tech perform periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 2. Aid tooling mechanics to set or reset tooling details during periodic inspections or tooling installations. 3. Conduct measurement studies on in-process or completed aircraft based on planned schedules or un-planned demand. 4. Coordinate with operations to schedule inspections that will have minimal impact on aircraft production. 5. Utilize Metrologic model-based inspection processes within CATIA V5, gather 3D inspection data and provide basic real time analysis. 6. Assist in the development and documentation of standards for the handling and utilization of metrology equipment. 7. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 8. Ensure proper use and storage of tools, equipment and supplies. Advise management of any associated problems or other requirements. Experience with Metrology software preferred but any 3D model-based metrology software is acceptable (SA, Verisurf, Polyworks, etc.)




    Education and Experience Requirements:
    High School Diploma or GED required. 4 years Laser Tracker, Laser Radar or CMM experience. 2 years Metrologic and CATIA V5 experience. 2 years tool fabrication, jig building, or machine shop experience preferred. Must be proficient in reading and interpreting aircraft & tooling designs. Must possess strong computer and shop math skills. Valid Driver’s License required.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    6 Non-Destructive Test (NDT/NDI) Level II Needed

    Description:
    Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
    MUST BE US PERSONS
    MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

    • Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
    • Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
    • Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
    • Operate manual and automated NDT equipment.
    • Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
    • Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
    • Will be required to, but not limited to be working on check aircraft.
    • Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
    • Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
    • Excellent attendance, ability to work overtime, and other shifts as required.

    REQUIREMENTS
    • Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
    • Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
    • Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
    • Ability to conduct inspections with limited supervision.
    • Minimum 5 years aviation/aerospace industry experience desired.
    • Excellent computer skills. Skilled in working in Microsoft Office applications.
    • Experience on narrow body and/or business jet aircraft preferred.
    • Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
    • Must display maturity of action and judgment.
    • Must be able to work under pressure and thrive in a fast-paced environment.
    • Good communication skills.
    • Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

    Physical and/or Additional Requirements
    • Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
    • Willing to work overtime, all shifts, travel and be on-call as necessary.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 504
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 8+ Months
    Start Date: ASAP
    Input Date: 09/29/2021
    Last Updated: 02/24/2022
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Pilot

    Description:
    We are seeking an experienced pilot to fill a position for an exciting aerospace company in Nagoya, Japan. Interested candidates should have 4000 or more flight hours as well as experience flying with a Japanese Airline.

    Responsibilities of the Pilot
    Perform flight tests and flight test related work.
    Take part in creating effective training programs.
    Provide technical customer support for aviation matters when needed.

    Requirements
    Japanese Transportation Pilot license
    Effective Type 1 Aviation Physical Examination
    Aviation English Proficiency Level 4 or higher
    Air radio pilot license
    4,000 or more hours flight time.
    JET aircraft type limited, with more than 1,000 hours of PIC experience at a Japanese airline
    Limited take-off weight of 50t or more
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Andrew Bondy
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Process Engineer (Data Migration for Manufacturing Work Instructions)

    Description:
    This Rome NY facility manufactures power transmission systems for both military and commercial aircraft utilizing manufacturing methods such as machining, welding, NDT inspection, painting, assembly, and testing.

    This position requires the ability to migrate legacy manufacturing work instructions from Microsoft Excel into a new digital system called Solumina. During the migration, the candidate will be trained to develop an understanding of the existing manufacturing process to incorporate improvements based off known.

    The estimated 1000 legacy work instructions exist in MS Excel which will require full conversion including images, set up details, data collections and hyperlinks to supporting documentation. An estimated 300 process plans are currently converted into Solumina which provide many examples and templates to reference and develop from.

    The use other software systems will be required such as SAP, TeamCenter and Unigraphics (NX) in an effort to enhance the level of detail while converting into the new system. The candidate(s) will be working with one full time Manufacturing Engineer dedicated to this project for 1:1 support and direction.

    This candidate must be self-motivated, thorough, provide quality instruction, and take pride in their work. Hands on work experience is a plus

    An Associates Degree is required
     
    Job Number: 1910109934
    Job Location: Rome, NY
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Production Stress Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Unique Skills:
    • Must have a minimum of 10 years’ experience in stress analysis on primary aircraft structure.
    • Must have a minimum of 5 years’ experience in stress analysis on aircraft composite structure.
    • Must have a minimum 5 years’ experience supporting MRB activities on aircraft composite structure.
    • Working knowledge of CATIA V5 is a plus.

    Education:
    • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-401
    Job Location: Tulsa, OK
    Rate: $75/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Production Stress Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Unique Skills:
    • Minimum of 10 years in stress analysis of primary aircraft structure.
    • Some experience required in fatigue analysis on aircraft structure.
    • Some experience supporting MRB efforts in developing and substantiating aircraft structural repairs.
    • CATIA V5 knowledge is a plus.

    Education:
    • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Essential Functions:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-400
    Job Location: Savannah, GA
    Rate: $75/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineering Manager

    Description:
    Project Engineering Management background with a focus on airframe component design including radome structure, nacelle structure and exhaust at a project engineering/management level.
    Degree is mandatory client interaction background and vendor interaction skills.

    • Must have PMBOK (PMP institutes book of knowledge on how to program manage) experience.
    • PMP certification a must (if they have this they have the PMBOK knowledge)
    • Must have MS Project and Office experience
    • P&L responsibilities
    • Experience meeting deadlines

    *The project is adding a radome structure to the front of a larger aircraft.



    The Structures Company is an AA/EOE.
     
    Job Number: 360
    Job Location: Tulsa, OK
    Rate: $60-$70/hr.
    Per Diem: Yes
    Duration: 12-24 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Manager - Aerospace

    Description:
    We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

    Responsibilities of the Project Manager

    Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
    Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
    Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
    Preparation of lower level schedules and support for sub-group leads in assignment of resources.
    Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
    Keep management and relevant members of the team informed on progress of significant activities.
    Planning and coordinating integration of design change activities.
    Understand all assigned systems contract requirements in support of suppliers.
    Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
    Manage and monitor overall project budget with support from financial controller.
    Identify, manage and follow up project risk, issues and opportunities.
    Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

    Requirements of the Project Manager

    Minimum 10-years of experience in aerospace required.
    Strong skills and experience coordinating with other division and leading projects.
    Aircraft systems and/or project management experience.
    Excellent overall knowledge about aircraft manufacturing and certification program.
    Prior experience creating governance structure and KPI.
    Have high level communication skills, energetic and driven to complete projects.
    Proficiency with MS Project and MS Excel.
    PMP certification and cost/budget management is preferred.
    Candidates must be fluent in both written and spoken English.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Secondary Flight Control Systemd Compliance Engineer

    Description:
    We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

    Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

    Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
    Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
    Conduct tests, witness tests and creating test reports.
    Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
    Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
    Support alignment of company proposals to globally accepted standards for certification and compliance.
    Conduct coordination with related parties such as JCAB, FAA and EASA.
    Manage the scheduling of all certification activities.

    Requirements

    Excellent working experience in commercial aerospace.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
    10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
    Excellent communication skills.
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Andrew Bondy
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Compliance Engineer

    Description:
    We are currently seeking an experienced Compliance Engineer to fill an opening with a progressive aerospace company in Nagoya, Japan. Interested candidates should have 10 plus years experience with Aerospace Program Development and Certification.

    Responsibilities of the Compliance Engineer
    Develop sustainable and executable certification standards and guidelines as well as means of compliance.
    Resolve complex compliance issues and difficulties.
    Establish consistent standards for design compliance.
    Build and maintain a strong relationship JCAB and FCAA representative.
    Develop training standards for the companies engineering compliance personnel.
    Coordinate activities between engineering and certification process teams.
    Manage the implementation of Continued Operational Safety Process (COSP).

    Requirements
    10 plus years of engineering experience in assigned function, including development programs as well as aircraft certification.
    Proficient with certification requirements and compliance standards including Part 21, 25 and ACs/AMCs.
    Significant experience dealing with aviation regulators to support certification goals.
    Experience resolving cross-functional engineering compliance issues
    Knowledge of the aviation industry's roles in rule-making and compliance
    Proven leadership and solid communication skills.
     
    Job Location: Japan
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Andrew Bondy
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Manager, Loads & Dynamics

    Description:
    General Summary:

    The Senior Manager for Loads will be responsible for people, processes, and tools to meet the current and future Aircraft Loads analysis needs of the Aircraft sustainment and future development programs. Will be responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

    Duties and Responsibilities:
    In this role you will be responsible for guiding the loads analysis team along with defining and validating aircraft flight and ground loads through simulation/calculation using established theory and methods.


    Qualifications
    Education, Work Experience, Certification and/or Licensure:
    • BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
    • Applicant shall possess a minimum of 10 years’ experience in aircraft external Loads analysis and 6 years leading teams
    • Excellent communication skills both written and verbal
    • Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.
    • Travel required 25% or less.


    Knowledge, Skills and Abilities:
    • Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
    • Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
    • Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks.
    • Must be proficient in generating documentation to support certification efforts related to external loads.
    • Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required.
    • Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
    • Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
    • Good fundamental knowledge of mass properties principles as they relate to loads analysis
    • Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable.
    • Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis.



    The Structures Company is an AA/EOE.
     
    Job Number: 362
    Job Location: NC
    Rate: $147-$170K **DOE**
    Duration: DIRECT POSITION
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Principal Engineer ( Clearfield, Utah ) S9778040

    Description:
    Senior Principal Engineer ( Clearfield, Utah ) S9778040
    12 Month Contract

    Pay Rate: Open

    Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

    **MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

    Role description & Responsibilities:
    Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
    Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

    The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

    Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

    Experience Preferred:
    • Previous experience in aerospace manufacturing facility
    • Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
    • Definition of layups and ply patterns with Fibersim to generate finite element models
    • Requirements definition and verification
    • Constitutive Model Development and implementation
     
    Job Number: S9778040
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: No
    Overtime: yes
    Duration: 12 Month
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim Mahaney
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Principal Engineer Manufacturing FL

    Description:
    167324 Senior Principal Engineer Manufacturing (Job Number: 19038819)
    Number of Openings: 2
    Location(s): United States-Florida-Melbourne

    Shift: 1st Shift
    Target Start Date: Jan 27, 2020
    Target End Date: Dec 18, 2020

    Pay Rate: $55 to $57/hr
    Work Schedule: 9/80

    Responsibilities:
    - Maintains configuration of the aircraft to Engineering requirements
    - Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing
    equipment and manufacturing techniques
    - Translates Engineering requirements into a product build package
    - Collaborates with tool design on manufacturing requirements
    - Controls the flow of parts
    - Coordinates make vs. buy part decision
    - Structures Manufacturing Bill of Material (MBOM)
    - Defines sequence of operations and specifies procedures for product build
    - Ensures manufacturing processes and procedures are in compliance with customer requirements
    - Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
    - Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
    - Supports the build and test of product
    - Clears constraints affecting production of aircraft
    - Investigates and initiates corrective actions and improvements in product quality and efficiency
    - Collaborates with tool design to ensure product build is repeatable
    - Oversees the integration of aircraft assembly technologies and processes
    - Provides technical solutions to a wide range of complex and difficult problems
    - Experience integrating products from engineering design to manufacturing floor
    - Provides detailed written instructions that help facilitate product fabrication
    - Independently determines and develops approach to solutions

    Basic Qualifications:
    - 17 Years of Manufacturing Engineering Experience with a High School Diploma or GED; 9 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 5 years of engineering experience with Master’s Degree in STEM and 3 years of Engineering experience with PHD.
    - 9 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality

    Preferred Qualifications:

    - Experience reviewing and interpreting electrical wire diagrams
    - Experience supporting aircraft hydraulic and/or fuel integration/maintenance
    - Experience supporting enhancement processes that improve production shop floor efficiencies
    - Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
    - Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
    - Experience supporting aircraft maintenance and/or flight test operations
     
    Job Number: JK-1837
    Job Location: Melbourne, FL
    Rate: 57/hr max
    Per Diem: pd split possible
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Project Engineer (Aircraft Design & Development - Evacuation Systems)

    Description:
    The Senior Project Engineer must:
    • Have 5+ years of Component and System Level Design and Development experience.
    • Be considered a Technical Expert in the Design, Development and Regulatory approval of Aircraft Systems.
    • Be capable of proposing new technology and/or designs in support of business unit objectives
    • Provide technical consultation to Management.

    This position level is expected to:
    • Impact business level objectives
    • Select and utilize engineering techniques to solve problems and make design recommendations.

    Essential Responsibilities:
    • Performs and assists in project management including defining, estimating and providing status of project tasks
    • Manages completion of moderate to complex projects within time and cost constraints
    • Designs new and improved components, sub-systems and inflatable structures for Aircraft Evacuation Systems
    • Initiates, oversees and conducts structural and performance analysis of components, sub-systems and systems
    • Plans and oversees the building, testing and reporting of prototypes through qualification and certification
    • Resolve moderate to complex technical problems using relentless root cause analysis
    • Utilizes Design to Cost principals to meet objectives
    • Assists in compilation of product manuals for customers
    • Assist in transitioning products from development to production
    • Identifying, preparing and submitting intellectual property, including patentable material

    A BS degree is required.
     
    Job Number: 2010111234
    Job Location: Phoenix, AZ
    Per Diem: split
    Overtime: possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sheet Metal Mechanic - no clearance URGENT priority fill SC

    Description:
    165814 Job Title: Sheet Metal Mechanic

    Work Site Address: Greenville, SC 29605
    Job Number: 1871-1
    Max Pay Rate: $29.00/hr
    Desired Start Date: ASAP
    End Date: 4/30/2020
    Position Type: Contract

    Job Description:
    Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.

    P-3 Navy Aircraft Experience a plus

    Sheet Metal 2-4 yrs required

    Qty 7 positions needed

    MORE RESUMES NEEDED!!!

    Manager added 3 additional slots

    P-3 Navy Aircraft Experience a plus
     
    Job Number: JEG-1871-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 4 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sheet Metal Mechanic / C-130 desired / modification experience URGENT priority fill SC

    Description:
    166861 Job Title: Sheet Metal Mechanic

    Work Site Address: Greenville, SC 29605
    Job Number: 2681-1
    Max Pay Rate: $29.00/hr
    Start Date: 1/13/2020
    End Date: 1/13/2021
    Position Type: Contract

    Need qualified candidates with experience modifying C-130 and/or any other heavy aircraft.

    Manager is highly motivated to fill ASAP

    C-130 experience is desired but not required.

    There are 11 open spots available for this request.

    Position Details:
    • Sheet Metal Mechanic
    • Contract duration is 1-year with potential to extend up to 18 months
    • Job Description: Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.
    • C-130 experience desired but not required.

    Skills:
    Category Name Required Importance Experience
    Areas of Expertise C-130 No 1 4 - 6 Years

    Qty 11 position

    Manager is highly motivated to make selections quickly.
     
    Job Number: JEG-2681-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sheet Metal Mechanic / C-130 modification experience required URGENT SC

    Description:
    166687
    Job Title: Sheet Metal Mechanic

    Work Site Address: Greenville, SC 29605
    Job Number: 2463-1
    Max Pay Rate: $33.83/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.

    Qualifications and Education Requirements
    C-130H Experience
    Modification Experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 2 2 - 4 Years
    Areas of Expertise C-130H No 1 4 - 6 Years

    Qty 3 positions
    This is an URGENT requirement.
     
    Job Number: JEG-2463-1
    Job Location: Greenville, SC
    Rate: 33.68/hr max
    Duration: 8 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    ****MUST be a U.S. Citizen or Permanent Resident****

    Unique Skills:
    1. Five plus (5+) years experience in designing and implementing web-based business systems including participation in software architectural design as a Full Stack Developer.
    2. ASP.Net experience (Webforms & MVC), using C#, VB.Net, HTML5, Bootstrap 3.0+, jQuery, and JavaScript with Microsoft Visual Studio 2015+.
    3. Experience with Web Services (ASMX & WCF).
    4. Experience with Winform desktop applications. Must have some experience with database work specific to SQL Server 2016.
    5. Must have some experience with Stored Procedures, Functions, Triggers, Linked Servers, Open Query, etc.
    6. Experience with Oracle 11.2+ is a plus.
    7. Excellent oral and written communication skills.

    Education and Experience Requirements:
    1. Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. See Other Requirements in Job Description.
    3. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    4. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Performs other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12021
    Job Location: Savannah, GA
    Rate: $53.69 - $63.45/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer - Clearance TX

    Description:
    2890-1 Software Engineer
    Work Location: Fort Worth, TX
    Status: Open

    Qty: 1
    Desired Start Date: 1/28/2020
    End Date: 1/28/2021

    Job Description:
    The F-35 Shared Simulation Software team is looking for highly motivated software engineers who have at least five years of experience developing and integrating software components using C++ and Object Oriented Development analysis (OOA)/ Object-Oriented Design(OOD) techniques. The Shared Simulation Software team develops and maintains the software simulations products that support the integration, testing, verification and mission effectiveness analysis for the F-35 program.
    Additional desired skills for this position include software development experience with real-time simulation operating systems, avionics software flight and sensor software.

    Responsibilities may include developing simulation software to incorporate new aircraft capabilities, integrating new or updated vendor models, integrating the shared simulation software products with customer products, performing analysis of simulation results with actual sensor performance and participating as a member of an agile team.

    Additional Desired Skills:
    Experience with Aircraft Avionics Sensors – Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
    Experience with Agile software development methodologies and tools, such as VersionOne
    Experience with Linux operating systems

    Region: Fort Worth, TX
    Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
    Pay Rate: $90.00 Hourly
     
    Job Number: JE-2890-1S6
    Job Location: Fort Worth, TX
    Rate: 90/hr max
    Per Diem: pd split possible
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer / Infrared Sensor background Java or Ada or C++ - Clearance GA

    Description:
    Software Engineer
    Work Location: Marietta, GA
    Status: Open

    Qty: 1
    Desired Start Date: 11/12/2019
    End Date: 2/12/2021

    Job Description:
    The Software Engineer will be a technical staff member for laboratory software development within the Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programming errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.

    Bachelor of Science in an Engineering discipline or another technically related discipline from an accredited university.

    -Experience in the use of Windows and Unix Operating Systems.
    -4+ years experience of software development in high order languages (C++, Java and/or Ada).
    -Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

    Seeking True Software Developers with Infrared Sensor Background.

    Region: Marietta, GA
    Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
    Pay Rate: $66.00 Hourly

    Soft Skills Ability to Work Independently No 1
    Software Skills ADA No 1 4 - 6 Years
    Software Skills C++ - Intermediate Level No 1 4 - 6 Years
    Software Skills Java No 1 4 - 6 Years
    Software Skills Java Script - Advanced No 1 4 - 6 Years
    Software Skills UNIX No 1 4 - 6 Years

    Work Schedule: 9/80-A
     
    Job Number: JE-2399-1S6
    Job Location: Marietta, GA
    Rate: 66/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Staff Engineer Software (5 openings) - Clearance FL

    Description:
    167989 Staff Engineer Software (Job Number: 20005094, 20005104, 20005107)

    Number of Openings: 5

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Apr 27, 2020

    Target End Date: Apr 23, 2021
    Requested Hourly Rate: 85.00

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year

    Interim Clearance required to start

    5 Openings

    Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    Length of contract is up to 12 months with option to hire.

    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
    • Full Lifecycle design, implementation, and unit testing of software
    • Work with various sub teams to integrate functionality with other IPTs
    • Actively participate in code reviews
    • Develop SW products from all phases of SW life cycle.


    Basic Qualifications:

    •Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university plus 14 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 12 years of software engineering experience.
    •Experience developing software / writing code in C/C++, Java, or Ada
    •Experience with Linux

    Preferred Qualifications:

    •Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
    •Strong Problem Solving Skills
    •Experience in Software Test
    •Familiarity with Atlassian tool suite and tools like git and Confluence
    •Familiarity with Agile software development process
    •DOORS experience
    •Eclipse or other integrated development environment (IDE)
    •Knowledge of Linux systems with basic commands
    •Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
    •Experience with OpenGL
     
    Job Number: JK-1850S
    Job Location: Melbourne, FL
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 1 year
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Staff Structural Analysis Engineer / 2nd shift / Nastran Patran FEM analysis DaDT - no clearance CA

    Description:
    167042 Staff Structural Engineer (Job Number: 19035635 or 19035638)

    Number of Openings: 2

    Location(s): United States-California-Palmdale


    Shift: 2nd Shift

    Target Start Date: Mar 16, 2020

    Target End Date: Mar 12, 2021

    Pay Rate: $80 to $85/hr

    Work Schedule: 4/10 - 2nd Shift

    Duration of Assignment: Up to 1 year

    2 Openings

    Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

    Basic Qualifications:

    Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.


    Preferred Qualifications:

    Previous experience in structural analysis of fighter aircraft structures preferred
     
    Job Number: JK-1828
    Job Location: Palmdale, CA
    Rate: 80-85/hr max
    Per Diem: pd split possible
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Staff Structural Engineer / 2nd shift / structural analysis of fighter aircraft structures - no clearance CA

    Description:
    Staff Structural Engineer (Job Number: 20004057, 20004060)
    Number of Openings: 1
    Location(s): United States-California-Palmdale

    Shift: 2nd Shift
    Target Start Date: Mar 16, 2020

    Target End Date: Mar 12, 2021

    Pay Rate: $80 to $85/hr
    Work Schedule: 4/10 - 2nd Shift
    Duration of Assignment: Up to 1 year

    Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at the Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

    Basic Qualifications:

    Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.

    Previous experience in structural analysis of fighter aircraft structures preferred
     
    Job Number: JK-1844
    Job Location: Palmdale, CA
    Rate: 80-85/hr max
    Per Diem: pd split possible
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer

    Description:
    Unique Skills:
    1. Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS.
    2. CATIA V5, NASTRAN, and PATRAN, are desired.
    3. System stress analysis experience also preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12229
    Job Location: Savannah, GA
    Rate: $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer

    Description:
    Unique Skills:
    1. Candidate will be performing structural analysis of our client's interior monuments using FEA and classical hand analysis.
    2. Responsibilities will include both the analysis and certification documentation.

    The ideal candidate will have experience in the following:
    1. Experience performing structural analysis on aircraft Interior Furnishings.
    2. Use of finite element analysis for both primary and secondary structures.
    3. MRB experience for both Primary and Secondary Structures.
    4. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations.
    5. A working knowledge of FAR part 25 certification requirements.
    6. A good understanding of a fast paced completion-style environment.
    7. Working knowledge of FEMAP is required.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11996
    Job Location: Savannah, GA
    Rate: $68.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer - Interior

    Description:
    Stress Analysis Engineer - Interior Furnishings

    - Experience performing structural analysis on aircraft Interior Furnishings
    - Use of finite element analysis for both primary and secondary structures
    - MRB experience for both Primary and Secondary Structures
    - Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
    - A working knowledge of FAR part 25 certification requirements
    - A good understanding of a fast-paced completion-style environment
    - Working knowledge of FEMAP is required
     
    Job Number: 19-14438
    Job Location: Southeast
    Duration: Year Plus
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analyst Engineer

    Description:
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Number: 358
    Job Location: IN
    Rate: $65/Hr. **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    Unique Skills:
    Minimum of 10 years in stress analysis of primary aircraft structure.
    Some experience required in fatigue analysis on aircraft structure.
    Some experience supporting MRB efforts in developing and substantiating aircraft structural repairs.
    CATIA V5 knowledge is a plus.

    Job Description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 151381
    Job Location: Savannah, GA
    Rate: $75/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long Term Contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Ravi Singh
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    Unique Skills:
    1. Must have a minimum of 10 years experience in stress analysis on primary aircraft structure.
    2. Must have some experience in fatigue analysis on aircraft structure.
    3. Must have some experience developing and substantiating aircraft structural repairs.
    4. Having experience analyzing composite aircraft structures is a plus.
    5. CATIA V5

    Job Description:
    1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. See Other Requirements in Job Description.
    3. Five (5) years in the specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors, or 3 years in the specific technical discipline with Masters, or 1 year in the specific technical discipline with PhD.

    Position Purpose:
    1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects.
    2. Provides specialized technical assistance to team members.
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
    4. Determines and develops own approach to solutions within schedule and cost objectives.
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
    6. Acts as liaison with representatives outside of the assigned group/area.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    3. Performs other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering related field preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 12222
    Job Location: Savannah, GA
    Rate: $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    Must have a minimum of 10 years’ experience in stress analysis on primary aircraft structure. Must have a minimum of 5 years’ experience in stress analysis on aircraft composite structure.
    Must have a minimum 5 years’ experience supporting MRB activities on aircraft composite structure. Working knowledge of CATIA V5 is a plus.
     
    Job Number: 20-151834
    Job Location: OK
    Start Date: $75.00
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer

    Description:
    Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

    Your Mission

    Responsibilities:
    • Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
    • Develops standardized analysis criteria and templates
    • Plays an integral role in the work flow release process for all structural designs
    • Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
    • Supports the creation of structural test plans which will be used to verify manufacturing
    • Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
    • Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
    • Handles Inspection inquiries, requiests, and new inspection from VGMX team.
    • Defines primary structures inspections as needed for flight test and EIS.
    • Compiling and implementing tools, methods and procedures learned and implement with team.

    What You Bring
    Basic Qualifications

    • Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
    • Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
    • Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
    • Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
    • Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
    • Experience with free-body diagrams and classical stress analysis techniques.
    • Excellent verbal and written communication skills
    • Excellent organizational and problem-solving skills
    • Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    • Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

    Preferred Skills and Experience
    • Hands-on experience with composites part fabrication and assembly processes.
    • Proficiency in FEMAP a plus
    • Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    • Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    • Experience with manufacturing-based ERP systems, such as Oracle, is a plus

    Physical and/or Additional Requirements

    • None


    The Structures Company is an AA/EOE.
     
    Job Number: 499
    Job Location: Mojave, CA
    Rate: $75-$85/Hr. ***DOE***
    Per Diem: Yes
    Overtime: Yes
    Duration: 8+ Months
    Start Date: ASAP
    Input Date: 09/17/2021
    Last Updated: 09/28/2021
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer - Composites

    Description:
    Must have a minimum of 10 years experience in stress analysis on primary aircraft structure. Must have a minimum of 5 years experience in stress analysis on aircraft composite structure. Must have a minimum 5 years experience supporting MRB activities on aircraft composite structure. Working knowledge of CATIA V5 is a plus.
     
    Job Number: 20-139001
    Job Location: OK
    Rate: $79.00 per hour
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer - Interior Furnishings

    Description:
    The ideal candidate will have experience in the following:
    1. Use of finite element analysis for both primary and secondary structures
    2. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations 3. A working knowledge of FAR part 25 certification requirements
    4. A good understanding of a fast phased completion style environment
    5. Working knowledge of FEMAP is required
    6. MRB experience for both Primary and Secondary Structures

    Education/Experience
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 24-366
    Job Location: Savannah, GA
    Rate: $68-$75/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineers / Stress Analysts Needed

    Description:
    Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
    Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
    Support development of analysis methods and tools for design/manufacture/testing/certification.
    Support Tier 1 Supplier/Partner analysis and oversight of methods.
    Support design reviews and model releases for all structural interfaces within an IPT environment.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer ( Clearfield, Utah ) S9271202

    Description:
    Structural Analysis Engineer ( Clearfield, Utah ) S9271202
    12 Month Contract

    Pay Rate: $70-80 /hr W2, maybe more for the right candidate

    **MUST HAVE AN ACTIVE SECRET CLEARANCE

    Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
    Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

    Experience Requirements:
    **MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

    ** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
    Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

    Experience Preferred:
    Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

    Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
     
    Job Number: S9271202
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: no
    Overtime: yes
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Engineer

    Description:
    Position Summary:

    Design complex, standard or custom, mechanical and structural airframe installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

    This assignment is expected to be approximately 12-18 months in duration.

    Primary Responsibilities:

    Detail Design: 50%
    Create detail/assembly/installation drawings for new helicopter completions and STC projects.
    Review and facilitate engineering package release.
    Works with groups of engineers to complete projects.
    Works under general supervision from the Lead engineer
    Follows established procedures
    Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
    Project Coordination: 20%
    Coordinates essential information into the configuration management system listing mechanical and structural installations for each aircraft unit produced by AHI
    Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
    Engineering Support: 20%
    Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
    Act as liaison to manufacturing and production efforts as needed.
    Support installation, functional and operational tests, and ground and flight tests.
    Structural Substantiation: 10%
    Performs preliminary stress analysis in support of initial layout and design concept.
    Additional Responsibilities:

    Other duties as assigned.
    Qualified Experience / Skills / Training:

    Education:

    Required:

    Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent experience
    Experience:

    Required:

    Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
    Preferred:

    Minimum one (1) year of helicopter design and integration.
    Licensure/Certifications:

    Required:

    None
    Preferred:

    None
    Knowledge, Skills, Demonstrated Capabilities:

    Required:

    Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
    Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

    Must be able to communicate effectively in the English language (verbal and written).
    Conversational French and/or German is a plus.
    Technical Systems Proficiency:

    Must be proficient with Microsoft Office Suite programs.
    Minimum 4000hrs CATIA V5 (or similar 3D modeling software) , familiarity with AutoCAD and SAP programs
    Travel Required:

    5%
    Minimal domestic and International travel is required.
    Citizenship:

    US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
     
    Job Location: TX
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Tracey Hill
    Address: 1600 AIRPORT FWY STE 400
    City, State: BEDFORD, TX 76022-6871
    Phone: 817/545-4009
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

    Description:
    165671/1801-1
    Senior Level Structural Strength (Stress) Analyst
    Work Location: Marietta, GA
    Status: Open

    Qty: 1
    Desired Start Date: 8/19/2019
    End Date: 8/28/2020

    Job Description:
    This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

    Work Location: Marietta, GA
    Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
    Pay Rate: $58.73 Hourly

    Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
    Technical Skills Stress Analysis Yes 1 6 + Years
     
    Job Number: JE-1801-1
    Job Location: Marietta, GA
    Rate: 58.73/hr max
    Per Diem: pd split possible
    Duration: 12 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Safety Engineer / F-35 Joint Strike Fighter program - Clearance TX

    Description:
    166094 Job Title: Safety Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 1953-1
    Max Pay Rate: $63.99/hr
    Start Date: 8/30/2019
    End Date: 11/20/2020
    Position Type: Contract

    Job Summary:
    System safety engineer for the F-35 Joint Strike Fighter program.

    Job Description:
    Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification. Perform contractual efforts for the system safety team to meet deadlines with high technical quality. Coordinate and collaborate with internal safety team, product development teams, and customer entities.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS

    Previous experience as a system safety engineer or
    software safety engineer
    Good communication skills
    F-35 aircraft design knowledge
    Pilot certification
    Functional Hazard Analysis
    Weibull analysis
    Statistics
    MIL-STD-882
    DO-178
    DO-254

    Qty 1 position needed
     
    Job Number: JE-1953-1S
    Job Location: Fort Worth, TX
    Rate: 63.99/hr max
    Duration: 18 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer - Clearance CA

    Description:
    166737
    Job Title: Systems Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 2413-1
    Max Pay Rate: $98.00/hr
    Start Date: 10/30/2019
    End Date: 1/30/2021
    Position Type: Contract

    Job Summary:
    This position is for a senior member of an ADP Systems Engineering team, providing support across the entire product line including both modernization and existing programs. The candidate will be part of a fast paced, dynamic environment exploring state of the art technical solutions.
    The successful candidate will be responsible for the integration and test of Mission Systems capabilities and functions in a laboratory and flight test environment.

    Utilizing mission systems requirements, the candidate will lead the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality which support flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.

    The ideal candidate will have a practical understanding of Earned Value Measurement Systems (EVMS), aspires to be a technical leader and is well-versed in systems engineering, prepared to run significant elements within the effort and think creatively and individually. A working knowledge of Requirements and Verification Traceability tools establishing verification methods is considered an imperative.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Experience leading systems engineering activities across organizations or suppliers
    Experience with requirements generation and decomposition
    Experience using software tools (such as MS Excel and Access)
    Experience with tracking requirements using the DOORS database tool
    Experience with systems engineering process
    Experience with operation of flight hardware and test equipment in a lab environment
    Experience with hardware configuration management
    Experience reading Engineering Drawings and Parts List
    Ability to work with different suppliers and engineering disciplines to derive and decompose requirements
    Experience developing a system architecture (or familiarity with Department of Defense Architecture Framework (DoDAF))
    Good written and verbal communication with experience in writing requirements
    Operational work experience


    Skills: Category Name Required Importance Experience
    Areas of Expertise Risk Management No 1
    Software Skills DOORS No 1

    Qty 1 position
     
    Job Number: JE-2413-1TS6
    Job Location: Palmdale, CA
    Rate: 98/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer - Clearance TX

    Description:
    166144 Job Title: Systems Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2002-1
    Max Pay Rate: $65.92/hr
    Start Date: 9/13/2019
    End Date: 12/12/2020
    Position Type: Contract

    Job Summary:
    This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

    Job Description:
    Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    • Experience in DMSMS in the Aerospace Industry
    • Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
    • Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
    • Experience working with Suppliers and/or Supply Chain engagement.
    • Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
    • Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
    • Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

    Areas of Expertise Materials No 1
    Areas of Expertise Supply Chain No 1
    Technical Skills Data Management No 1

    Qty 1 position needed
     
    Job Number: JE-2001-1S5
    Job Location: Fort Worth, TX
    Rate: 65.92/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer / Fleet Configuration Management - Clearance TX

    Description:
    166807 Job Title: Systems Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2591-1
    Max Pay Rate: $70.00/hr
    Start Date: 11/13/2019
    End Date: 2/13/2021
    Position Type: Contract

    Job Summary:
    Fleet Configuration Management position which reports to the F-35 Configuration Management Organization located in Fort Worth, Texas.

    The successful candidate will be responsible for managing all CM related activities to support Time Compliance Technical Directives (TCTD). This individual will work with subject matter experts within the Sustainment CM team, the JSF Program Office (JPO), and other Global Sustainment teams to enable the execution of modifications. Tasks will involve Modification Baseline (MBD) preparation and coordination, Action Request (AR) support and TCTD reviews.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    -Configuration Management experience
    -MS Office suite
    -Product Data Management (PDM) experience
    -Technical Bachelors degree
    Desired skills
    -Experience working with government customers (ie, Joint Program Office (JPO) and Lightning Support Team (LST))
    -Aircraft Maintenance experience
    -Logistics Data Manager experience (LDM)

    Skills: Category Name Required Importance Experience
    Technical Skills Configuration Management No 1

    Qty 1 position
    This position can be located at the Fort Worth Main Plant or the Beach Street location.
     
    Job Number: JE-2591-1S
    Job Location: Fort Worth, TX
    Rate: 70/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer / Catia V5 - Clearance CA

    Description:
    167310 Tool Design
    Work Location: Palmdale, CA
    Status: Open

    Qty: 4
    Desired Start Date: 1/20/2020
    End Date: 1/14/2021

    Job Description:
    Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

    Basic Qualifications:
    - Minimum of 8-years of demonstrated professional Tool Design experience.
    - MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
    - Proficient in the use of GD&T.
    - Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
    - MS-Office proficient.

    Desired:
    - CATIA-V4 or V6 experience.
    - Experience in structural analysis.
    - Experience working in a fast paced, developmental environment.

    Region: Palmdale, CA
    Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
    Pay Rate: $75-85.00 Hourly
     
    Job Number: JE-2957-1S5
    Job Location: Palmdale, CA
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 12 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designers - Catia V5 or UGNX

    Description:
    UGNX or Catia V5 - Aircraft/Aerospace background
    Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: BO-TOL-MO
    Job Location: St. Louis, MO
    Rate: $59.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    Back to Advanced Job Search