Job Search Results

344 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 08:37AM Pacific Time by ContractJobHunter. )

Listings 1 - 344

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2608 - CABIN ELEC. SYS. INTEGRATOR - cv, word doc only

Description:
Support production and troubleshoot cabin systems on aircraft when required, to minimize issues impact on customer and/or in production.

Document the issues in order to allow a fast resolution including the analysis of electrical schematics and technical requirements as well as the interaction with the different systems suppliers.

Integrate, test and troubleshoot cabin systems such as the Cabin Management, Entertainment, Camera, Lighting or Security.

Work with different functions to plan, organize and run system development tests.

Provide visibility daily to your supervisor on the progress of the testing, the production support and the issue encounter.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Support change requests made by the Production team as well as change proposals made by customers.

Prepare the required documents, such as technical specifications, block diagrams, functional test engineering requirements (FTER) and test definition sheets (TDS).

Manage, review and approve the deliverables of the Electrical System Suppliers.

Prepare systems definition documentation such as ESSDs and wiring diagram and certification documentation for cabin systems.

Some travel may be required to support production in Client sites outside of the city.

Electrical or software engineering bachelor degree and at least three (3) years of relevant experience in aircraft testing and troubleshooting;

**This position is also open to New Grads in Electrical Engineering**

Cabin systems experience is an asset,

Familiar with FAR 25 requirements and the qualification rules pertaining to avionics/electrical systems.

Working experience using XML, embedded system programming, SNMP, HTML 5 and personal electronic device application is an asset.

Working experience with IP addressing verification, network topology (including wireless LAN), troubleshooting network tools (e.g Wireshark), telephony (SIP), voice over ip (VOIP) and quality of service (QoS) is an asset.

Have experience in dealing with a supplier base.

Have a working experience using AutoCAD, ECAD, CATIA and MS Office.

Must be bilingual (English and French), both written and spoken.

Must be able to work under minimum supervision, enjoy teamwork and have project organization skills.

Must also demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Individuals having a previous experience in testing and integration of interior systems for business aircraft will be preferred.

Position is for evening or night or weekend shift with 3 day shift ; 1 Evening shift; 1 night Shift; 1 Weekend shift.
 
Job Number: 2608
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ATE Test Engineer

Description:
This is a full time, 1 year contract, located in Grand Prairie, TX*



We are hiring for an Automated Test Equipment Engineer who will Design/develop/deploy test equipment hardware and software using automated tools such as LabView, LabWindows/CVI and Teststand. Candidate will be working on PAC-3 Missile-related test sets, which involves high performance data acquisition and control, in the presence of multi-threaded, multi-protocol military radio and instrumentation communications. Responsibilities will include working on failure mode analysis, timing synchronization, and closed loop feedback as well as validation and calibration sequences.

Required:

*9+ years' experience designing test stations using test console software with one or more of the following: Labview, TestStand, or Lab Windows CVI.
*Interface Test Adaptor (ITA) experience

*Experience in C software development.
*Candidate will need to apply and gain a clearance after starting, requires applicants to be US Citizens.
*BSEE or equivalent degree



Pluses:
*Developing ATEs for military electronics
*Familiar with test stations such as an ITA (interface test adapter), test console ( drivers, interaction of test equipment software with UUT (unit under test)
 
Job Number: 291
Job Location: Grand Prarie, TX
Rate: $90.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Wiring Designer

Description:
Airframe Wiring Designer

POSITION OVERVIEW

Our Client is a leading international engineering company looking for engineers to service the Aerospace sector. They are looking for Airframe Wiring Designer for FARA project.

LOCATION

Fort Worth, Texas

RESPONSIBILITIES

• This position applies to wiring integration work performed on a new product development.
• Wiring harness-system integration designer coordinates efforts with Electrical/Avionics and Aircraft Integration Team areas.
• Develop 3/D harness layouts in CATIA V6 utilizing CHS data files.
• Interface with customers and cross functional team members as well as provide design, development and air vehicle support.

REQUIREMENTS

• Required Skills:
• Microsoft software suite applications such as Excel, Word, PowerPoint, etc.
• 3,000 hours Capital Harnesses Systems (CHS) – Mentor Graphics - experience in aircraft design is required.
• ENOVIA and CATIA V6 experience.
• Ability to interpret engineering blue prints and produce accurate harness model representations.
• Familiarity with 3D models of various components / connectors from library.
• Good communication skills both oral and written.
• Must have good personnel coordination abilities.
• Must be a good team player.
• Education: BS / MS in Electrical / Electronics / Aerospace Engineering, degree preferred.
• Years of Experience: 5+ years of Electrical wiring design / analysis experience. Experience with Catia V6, Enovia 2013x and CHS are required.
 
Job Number: 225
Job Location: Fort Worth, TX
Rate: Open
Per Diem: no
Overtime: 0
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Brooke Burns
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - 2nd Shift - no clearance FL

Description:
167696 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3344-1
Max Pay Rate: $18.00/hr
Start Date: 3/2/2020
End Date: 6/2/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Under minimal supervision, Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds.
Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds for the encapsulation (protective enclosure) of assemblies.
Reports to Supervisor.
Essential Role and Responsibilities:
• Ability to read and interprets prints, labeling diagrams and mixing ratios.
• Operate several different types of dispensing and coating machines to meet customer specifications.
• Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting.
• Inspect assemblies to ensure proper coating coverage.
• Maintain the coating and dispensing machines to ensure proper operating condition.
• Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality.
• Transport racks of circuit boards from one destination to another to continue the manufacturing process.
• Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation.
• Perform general housekeeping duties to provide a safe and clean working environment at all times.
• Knowledge of various materials used.
• Must complete applicable Specific Function Training courses.
• Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements.
• Encapsulation of discrete assemblies.
• Replenishes chemicals, solvents, compounds, process fluids as required, including dispensing into secondary containers and chemical cleaning.
• Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes.
• Advances or retrieves product, material, and tools in house and from local suppliers for self and others.
Qualifications and Education Requirements
Mandatory:
• A positive attitude and dependability is a must for this position.
• Must have Mechanical/assembly skills and be able to develop scope skills.
• Ability to read prints/instructions.
• Good dexterity and experience working with small pieces of hardware.
• Must have an attention to detail.
• Ability to precisely mix and apply chemicals.
No degree required.

Qty 4 positions
2nd Shift
Pay Rate $16-$18/hr.
 
Job Number: LMRMS-3344-1
Job Location: Clearwater, FL
Rate: 18/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3538-1
Max Pay Rate: $22.00/hr
Start Date: 4/20/2020
End Date: 3/21/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Mandatory
• Must be able to solder
• Must have good manual dexterity
• Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
• experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Use of manual and automatic wire strippers.
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions.

Skills: Category Name Required Importance Experience
Technical Skills Cable Harness Yes 5 2 - 4 Years
Technical Skills Continuous Lacing Yes 5 1 - 2 Years
Technical Skills Soldering Yes 5 2 - 4 Years
Technical Skills Stripping and Crimping Wires Yes 5 1 - 2 Years

Qty 2 positions
Pay rate $15-$22/hr.
 
Job Number: LMRMS-3538-1
Job Location: Clearwater, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
167799 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3406-1
Max Pay Rate: $22.00/hr
Start Date: 3/30/2020
End Date: 3/8/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on printed circuit card assemblies.

Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-610 (and other) quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience working with Surface Mount Technology (SMT) material.
• One year experience in IPC-610 and/or J-STD-001 soldering
• Demonstrated printed circuit knowledge and experience
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in building circuit card assemblies
• Experienced working with a microscope
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions

Skills: Category Name Required Importance Experience
Technical Skills Bonding No 3 2 - 4 Years
Technical Skills IPC-A-610 No 9 1 - 2 Years
Technical Skills IPC-J-STD No 9 1 - 2 Years

Qty 2 positions
Pay rate $15-$22/hr.
Will not get max pay rate without extensive experience.
Will require a vision exam
 
Job Number: LMRMS-3406-1
Job Location: Clearwater, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance MA

Description:
167693 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 3335-1
Max Pay Rate: $18.13/hr
Start Date: 3/9/2020
End Date: 3/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Candidate must have 1-2 years Electronics work experience.
BA Degree is NOT required.
HS Diploma is Required.


Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Electronics Yes 1 1 - 2 Years
Soft Skills Ability to Work Independently No 5 1 - 2 Years
Soft Skills Ability to Work with Others No 4 1 - 2 Years
Soft Skills Written/Verbal Ability No 2 1 - 2 Years
Technical Skills IPC-A-610 Yes 1 1 - 2 Years
Technical Skills Ability to work in a production environment No 2 1 - 2 Years
Technical Skills Basic Computer Skills No 2 1 - 2 Years
Technical Skills J-STD-001 No 3 1 - 2 Years
Technical Skills Soldering No 3 1 - 2 Years
Technical Skills Surface Mount Technology No 4 1 - 2 Years

Qty 1 position
Hourly Pay Rate Range $13-$18
 
Job Number: LMRMS-3335-1
Job Location: Marion, MA
Rate: 13-18/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance NY

Description:
167829 Job Title: Assembler

Work Site Address: Owego, NY 13827
Job Number: 3405-1
Max Pay Rate: $22.00/hr
Start Date: 3/30/2020
End Date: 3/30/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Dedicated, flexible individual with good work ethics.
Candidates MUST have SMT operator Experience and Blueprint Experience.

Skills: Category Name Required Importance Experience
Software Skills SAP Yes 1 1 - 2 Years
Technical Skills Blueprint Reading Yes 2 1 - 2 Years
Technical Skills Soldering No 1 < 1 Year Qty 5 positions Candidates MUST have SMT operator Experience and Blueprint Experience. MUST be listed on resume and in Skills matrix.
 
Job Number: LMRMS-3405-1
Job Location: Owego, NY
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
167490 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 3074-1
Max Pay Rate: $16.00/hr
Start Date: 2/24/2020
End Date: 2/24/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Entry level position that includes some On Site Training.
Looking for candidates that have some knowledge/experience with Hand Tools.
Candidates must be open to OT and a flexible schedule.
Some Soldering experience is not required but is desired.
Candidate must be able to work with a team of people.

Qty 6 positions
IMMEDIATE NEED TO FILL THESE POSITIONS FOR AN UPCOMING SURGE IN PRODUCTION
 
Job Number: LMRMS-3074-1
Job Location: Marion, MA
Rate: 13.50-16/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance VA

Description:
167948 Job Title: Assembler

Work Site Address: Manassas, VA 20110
Job Number: 3511-1
Max Pay Rate: $20.00/hr
Start Date: 3/30/2020
End Date: 3/31/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.

May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Candidate must have Attention to Details and strong communication skills
Candidate must have ability to read Blue Prints
Candidate must have at least 1 year recent experience with Microsoft Office- Outlook, Excel and Solumina
No degree Required.
HS Diploma is required.

Skills: Category Name Required Importance Experience
Software Skills MS Excel Yes 1 < 1 Year Software Skills MS Outlook Yes 1 < 1 Year Qty 1 position Hourly Pay Rate Range $15-$20 based on previous experience
 
Job Number: LMRMS-3511-1
Job Location: Manassas, VA
Rate: 15-20/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance VA

Description:
167706 Job Title: Assembler

Work Site Address: Manassas, VA 20110
Job Number: 3351-1
Max Pay Rate: $17.00/hr
Start Date: 3/3/2020
End Date: 4/30/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Candidates must have some mechanical knowledge.
BA Degree is NOT Required.
HS Diploma is Required.

Skills: Category Name Required Importance Experience
Areas of Expertise Mechanical Yes 1 < 1 Year Qty 2 positions Hourly Pay Rate Range $15-$17
 
Job Number: LMRMS-3351-1
Job Location: Manassas, VA
Rate: 15-17/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / 2nd shift - no clearance FL

Description:
167979 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3528-1
Max Pay Rate: $18.00/hr
Start Date: 4/13/2020
End Date: 3/27/2021
Position Type: Contract

Job Summary:
Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies. Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces

• Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
• Must be able to read instructions and identify standard SMT components.
• Must be able to work in a fast-paced environment where some overtime may be required.
• Must be able to sit for long periods of time and focus on tedious tasks.
• Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
• Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned

• Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
• Ability to work under a microscope for long periods of time to perform inspection / solder repair.
• Must be able to read and interpret assembly drawings.
• Strong communication and organizational skills and ability to work in a team oriented environment.

Desired
• Experience working in a LEAN Manufacturing environment
• Strong leadership, mentoring and training aptitude
• IPC-610 Certification
• IPC J-STD-001 Certification

Skills: Category Name Required Importance Experience
Technical Skills Surface Mount Technology Yes 5 1 - 2 Years

Qty 3 positions
Pay Rate $16-$18/hr.
2nd Shift position
 
Job Number: LMRMS-3528-1
Job Location: Clearwater, FL
Rate: 16-18/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / SOLDERING IS REQUIRED - no clearance FL

Description:
167704 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3346-1
Max Pay Rate: $24.96/hr
Start Date: 3/2/2020
End Date: 3/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.

Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.
• Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
• Must be able to read instructions and identify standard SMT components.
• Must be able to work in a fast-paced environment where some overtime may be required.
• Must be able to sit for long periods of time and focus on tedious tasks.

Qualifications and Education Requirements
No degree required.
SOLDERING IS REQUIRED
• Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• Must have a minimum of 3 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
• Ability to work under a microscope for long periods of time to perform inspection / solder repair.
• Must be able to read and interpret assembly drawings.
• Strong communication and organizational skills and ability to work in a team oriented environment.
• Experience working in a LEAN Manufacturing environment
• Strong leadership, mentoring and training aptitude
• IPC-610 Certification
• IPC J-STD-001 Certification

Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 No 2 1 - 2 Years
Technical Skills Measuring No 5 2 - 4 Years
Technical Skills Soldering No 9 2 - 4 Years
Technical Skills Surface Mount Technology No 8 1 - 2 Years

Qty 1 position
Needs extensive touch up experience for max rate.
 
Job Number: LMRMS-3346-1
Job Location: Clearwater, FL
Rate: 24.96/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / heavy soldering experience - no clearance FL

Description:
167727 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3353-1
Max Pay Rate: $22.00/hr
Start Date: 3/2/2020
End Date: 2/3/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on printed circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-610 (and other) quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
Soldering is a must.
No degree required.
• One year experience working with Surface Mount Technology (SMT) material.
• One year experience in IPC-610 and/or J-STD-001 soldering
• Demonstrated printed circuit knowledge and experience
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in building circuit card assemblies
• Experienced working with a microscope
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions

Skills: Category Name Required Importance Experience
Areas of Expertise Electro-Mechanical No 1
Areas of Expertise Mechanical No 1
Technical Skills IPC-A-610 Yes 9 2 - 4 Years
Technical Skills IPC-J-STD Yes 9 2 - 4 Years
Technical Skills Mechanical Aptitude No 1

Qty 5 positions
Pay rate between $15-$22/hr. Extensive experience needed for max pay rate. Soldering is a must. Supervisor is looking for somebody with heavy soldering experience.
 
Job Number: LMRMS-3353-1
Job Location: Clearwater, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / requires routing and installing Wire bundles and Coaxial cable / wire termination / continuity checks - no clearance SC

Description:
167869 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3448-1
Max Pay Rate: $29.50/hr
Start Date: 3/23/2020
End Date: 9/25/2020
Position Type: Contract

Must have experience routing and installing Wire bundles and Coaxial cable
Must have experience with wire termination
Must have experience doing continuity checks

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qualifications and Education Requirements
Must have experience routing and installing Wire bundles and Coaxial cable
Must have experience with wire termination
Must have experience doing continuity checks

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 No 1
Areas of Expertise C-130H No 1
Areas of Expertise C-130J No 1

Qty 4 positions
 
Job Number: JEG-3448-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / requires routing and installing Wire bundles and Coaxial cable / wire termination / continuity checks / 2nd shift - no clearance SC

Description:
167868 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3445-1
Max Pay Rate: $29.50/hr
Start Date: 3/23/2020
End Date: 8/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qualifications and Education Requirements
Must have experience routing and installing Wire bundles and Coaxial cable
Must have experience with wire termination
Must have experience doing continuity checks

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 No 1 4 - 6 Years
Areas of Expertise C-130H No 1 4 - 6 Years
Areas of Expertise C-130J No 1 4 - 6 Years

Qty 4 positions
Position is 2nd shift.
 
Job Number: JEG-3445-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / Aircraft MODIFICATION experience REQUIRED - no clearance URGENT SC

Description:
167479 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3125-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 7/10/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qualifications and Education Requirements
Aircraft MODIFICATION experience REQUIRED
P-3 experience a plus but not required

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 1 - 2 Years

Qty 4 positions
 
Job Number: JEG-3125-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler - no clearance FL

Description:
167727 Job Title: Cable Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3354-1
Max Pay Rate: $23.00/hr
Start Date: 3/9/2020
End Date: 2/8/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. This is a 2nd Shift position.

Qualifications and Education Requirements
A degree is not required.

Skills: Category Name Required Importance Experience
Technical Skills IPC-WHMA-A-620 No 1

Qty 3 positions
This is a 2nd Shift position
Pay rate is $16-$23/hr.
Candidate needs extensive experience for max pay rate.
 
Job Number: LMRMS-3354-1
Job Location: Clearwater, FL
Rate: 16-23/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineers

Description:
STS Technical Services is hiring Cyber Security Engineers in Wichita, Kansas. 

Duties & Responsibilities:
Responsible for completing complex development, design, testing and Cyber Security certification assignments for Platform Information Technology (PIT) during new aircraft design and avionics modifications. Serves as technical consultant for Program Protection activities, including Trusted Systems and Networks (TSN), Cyber Resiliency, Anti-Tamper, and Information Protection. Gathers data and prepares documentation in support of U.S. Government Assessment and Authorization (A&A) efforts to obtain Cyber Security Authorization to Operate (ATO) certification.
Performs research, calculations, and estimates for projects to conform with established specifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome. Determines status of work in progress.
Maintains a high degree of proficiency in computer applications to accomplish tasks.
Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with suppliers to discuss and remedy issues in a more timely and efficient manner. Consults with customer Cyber Security representatives to develop and verify requirements, mitigate risks, and devise action plans.
Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
Reviews and evaluates supplier proposals for potential utilization.
Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and updates presentations to management of engineering and other company organizations.
Minimum Requirements:
Current CompTIA Security+ or equivalent certification
Experience with Risk Management Framework (RMF) per DoDI 8510.01 or AFI 17-101
Ability to obtain U.S. security clearance
Professional and diplomatic demeanor
Strong sense of accountability and integrity
Excellent verbal and written communication skills
Time management skills to support multiple concurrent projects
Ability to read 2D drawings using standard industry practices
Proficient in use of standard Microsoft Office programs
Desired Qualifications:
Current Certified Information Systems Security Professional (CISSP) or equivalent certification
Current U.S. Secret or higher security clearance
Experience with military avionics and mission systems, especially encrypted radios or military datalink communications systems
3 or more years of experience with DoD cybersecurity including RMF/ATO/DIACAP certification
Bachelor’s Degree or higher in Computer Engineering, Electrical/Electronics Engineering, Cyber Security, Information Technology, or Computer Science
Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Technical Services family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34647
Job Location: Wichita, KS
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database / Data Management Admin - no clearance SC

Description:
167928 Job Title: DB/Data Management Admin

Work Site Address: Greenville, SC 29605
Job Number: 3499-1
Max Pay Rate: $25.00/hr
Start Date: 3/27/2020
End Date: 3/29/2021
Position Type: Contract

Job Summary:
Enters, reviews and analyzes data within the database (database management). Ensures user data integrity, makes decisions affecting user access, documents and records attributes, and formulates database query and retrieval scripts. Reviews database design and integration of systems and provides backup recovery.

Other Possible Responsibilities:
Project Planner - Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Technical Writer - Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.

Main job function will be data entry and data review but must also have the ability to plan and manage projects and create detailed work instructions

Qualifications and Education Requirements

Preferred Skills
Skills: Category Name Required Importance Experience
Soft Skills Create Electronic Databases Yes 7 2 - 4 Years
Soft Skills Analyzing and synthesizing qualitative data No 7 2 - 4 Years
Software Skills MS Excel Yes 1 4 - 6 Years
Software Skills SAP No 1 1 - 2 Years
Technical Skills Ability to write technical documents and end-user documentation Yes 9 2 - 4 Years
Technical Skills Data Entry Yes 9 2 - 4 Years
Technical Skills Database management Yes 5 1 - 2 Years
Technical Skills Data Analysis No 3 1 - 2 Years
Technical Skills Database Administration No 3 1 - 2 Years
Technical Skills Demonstrate Technical and Creative Skills No 3 1 - 2 Years
Technical Skills Technical Writing No 9 1 - 2 Years

Qty 1 position
Looking for verified performance to job description and required skills.
 
Job Number: JEG-3499-1
Job Location: Greenville, SC
Rate: 25/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY

Senior Electrical Engineer that will possess strong knowledge of embedded systems and be able to immediately contribute to development efforts. The successful candidate's daily duties will involve developing embedded system designs using contemporary architectures. Designs will be implemented using C/C++ for a range of applications including: serial interfaces, Radio Frequency (RF) and Video DSP, controls, data links, embedded processing, etc. Generating high quality design documentation and demonstrating proficiency at configuration management will be expected. This position requires significant knowledge of printed circuit board design, construction, and terminology as required to realize embedded systems in hardware. Strong skills in system analysis, simulation, and algorithm development are also required.

Will need a U.S. Security Clearance within 1 year of start date.

Required Skills:
A minimum of four (4) years of experience with embedded microcontroller coding in C/C++. Must have expertise in:
C/C++ language to include advanced aspects, and best practices.
One or more contemporary embedded processor architectures, e.g. ARM Cortex-M.
System analysis using tools such as Python or Matlab to develop algorithms and evaluate system characteristics prior to committing to code.
Analog and digital peripherals commonly used in embedded systems e.g. SPI Flash, MAC, ADC,etc.
Contemporary embedded toolchains such as Keil, IAR, GNU etc.
Troubleshooting embedded systems and electronics in general.
Configuration management tools such as git or svn.
Printed circuit board construction, terminology, and design practices.

Desired Skills:
MS or Ph.D. in Electrical Engineering or Computer Science
Expertise digital signal processing techniques
Analog circuit analysis and design (Spice)
Knowledge of developing in a Linux environment
Embedded Linux
Embedded RTOS
Unit testing (TDD) concept and practice
System Architecting
Project management
Education Requirements: Requires a degree in Electrical Engineering or related Science, Technology, Engineering or Mathematics (STEM) field and four plus years of related experience

Required Education:
• Bachelor of Science in Electrical Engineering or equivalent, Master’s degree is preferred.
 
Job Number: BCIN292632
Job Location: Indianapolis, IN
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES:
Under the general direction of the Electronic Systems Group Lead, the Electronics Engineer and the electrical engineering team designs and develops systems used in underwater sonar. The work pertains primarily to development of custom hardware and embedded firmware and software used in data acquisition and power distribution electronic assemblies that reside in underwater environments.
1. Implement assigned projects and project tasks to provide electrical and computer engineering solutions including: schematic capture, PCB/PWB design, embedded C/C++ software design, and FGPA design (VHDL preferred)
2. Work in a laboratory environment integrating electronics. Familiarity with lab equipment such as oscilloscopes, function generators, DC power supplies, and thermal chambers.
3. Support documentation, verification, and validation used in producing, evaluating, testing and processing high fidelity data acquisition systems.
4. Perform technical review, design analysis, development and selection of hardware components
5. Modify existing hardware and software for obsolescence updates and bug fixes
6. Ensure that assigned project tasks are completed, meet established technical and schedule requirements and comply with company’s quality system procedures. Identify and report quality problems in the assigned areas and recommend corrective action and/or alternative solutions to correct abnormal problems or trends that could jeopardize achievement of cost or schedule objectives.
7. Prepare design review material in support of SRR, PDR, CDR, FDR and technical audits for assigned designs.
8. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

May perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods or otherwise to balance the workload.

REQUIRED EXPERIENCE:
1. A Bachelor’s degree in Computer, Electrical, or Electronics Engineering is required. In special circumstances, knowledge gained through engineering related work experience may be substituted for educational requirements.
2. 3+ years of experience in custom hardware development preferred, not required.
3. VHDL utilizing Xilinx and Microsemi tool chains along with familiarity in C/C++ for microcontrollers and SoC implementations
4. Familiarity with high speed data transmission protocols (Gigabit Ethernet, PCIe)
5. Understanding of spectral analysis parameters and digital signal processing for data acquisition systems preferred
6. Git or similar version control system

Knowledge, Skills and Abilities:
1. Strong analytic and communication skills.
2. Requires the ability to interpret and communicate engineering plans and specifications. Sound knowledge of engineering theory and design criteria.
3. Effective human relation skills are essential.
4. Ability to speak, read and write the English language.

Physical Demands:
1. Exerts up to 20 lbs. of force occasionally, or up to 10 lbs. of force frequently, or a negligible amount of force constantly to move objects.
2. Employee regularly sits while using upper body movements including arms, hands and fingers operating computer equipment and other office equipment.
3. Employee occasionally stands and/or walks to go into meetings or for discussions with other administrative / office personnel.
4. Employee occasionally reaches with hands and arms in moving tools equipment and/or products as needed.

Other Work Conditions and Requirements:
1. Employee works in a quiet to moderately noisy environment.
2. Travel may be required for several days with notice via auto/air.
3. Testing aboard ship may be required from time to time.

EDUCATION:
Accredited Bachelor’s degree in Computer, Electrical, or Electronics Engineering is required. In special circumstances, knowledge gained through engineering related work experience may be substituted for educational requirements.

WORK HOURS:
9/80
Full-Time
 
Job Number: 185285
Job Location: Ashaway, RI
Rate: $55/hour
Overtime: Not specified
Duration: 6/+ mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part's list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Powertrain & Electronics

Description:
Seeking a talented electrical engineer to join our team designing all-electric aircraft. This engineer will work closely with mechanical, software, and other cross-functional teams. You'll be taking ownership of key electrical subsystems and printed-circuit-boards from design through prototyping and to product. This is a hands-on position. Optimizing designs for reliability, weight, and efficiency will be a focus.

Responsibilities:
• Create clear and readable schematics for digital and mixed-signal printed-circuit-boards
• Component selection for minimum mass and maximum reliability
• Investigate modern technologies for power and data transmission/management
• Work with PCB designers to create reliable and low-weight layouts
• Write requirements, participate in DFMEAs + create and carry out test and validation plans

Required:
• Strong EE fundamentals, including familiarity with:
• Power conversion (linear and switching regulators)
• High-speed digital design and layout
• Signal conditioning and conversion (ADCs, filters)
• Discrete semiconductor design (FETs, BJTs, Diodes)
• Schematic capture and PCB design
• Experience with component selection
• Hands-on experience with building and debugging hardware
• Great communication skills
• B.S. in electrical engineering or related discipline

Desired Experience:
• M.S./Ph.D. in relevant discipline
• 2+ years of working experience in relevant industry
• Familiarity with Altium Designer
• High voltage electrical design (400V+)
• Exposure to regulatory certification
• Design-for-reliability, including use of DFMEA and fault trees
• Designing for high EMI environments



The Structures Company is an AA/EOE.
 
Job Number: 381
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - multiple openings - TX CA GA

Description:
167404 Job Title: Electrical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2915-1
Max Pay Rate: $64.00/hr
Start Date: 1/21/2020
End Date: 4/23/2021
Position Type: Contract

Job Summary:
Accepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.

Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.
Applies extensive technical expertise, and has full knowledge of other related disciplines. Develops technical solutions to complex problems which require the regular use of ingenuity and creativity.
Position may involve occasional travel and/or off-shift work.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Qty 10 positions
Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: JE-2915-1ATO
Job Location: Fort Worth, Palmdale, Marietta, TX, CA, GA
Rate: 64/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer MA

Description:
167668 Job Title: Electrical Engineer

Work Site Address: Marion, MA 02738
Job Number: 3311-1
Max Pay Rate: $85.00/hr
Start Date: 2/24/2020
End Date: 2/12/2021
Position Type: Contract

Job Summary:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Candidate must be highly motivated Test Station Development Engineer (TSDE) lead, looking to be converted into a permanent employee. The selected candidate will lead and provides individual contributor efforts for the development of test stations for the MK-48 Guidance and Control Warhead Electronics Systems (WES) development effort. This person will build and lead a team of other engineers.

For each test station to be developed, the candidate must work with the current engineering team to identify find the best solution, minimizing risk, complying with allocated cost and schedule, present the need for team members to functional level managers, lead the teams, and produce a robust and completely documented test stations.

The successful candidate needs to also be a very strong technical leader, hands-on contributor with electrical engineering development experience, a creative thinker, have the capability to build stations compliant with all specified requirements, within the allotted cost and schedule. A history of development, across a diversified team of engineers, suppliers, quality, manufacturing, etc., in all programmatic phases, is required.

For each test station development, the person will either own, or delegate the following activities:
1. Control Account Manager (CAM) with Earned Value Management in accordance with (ANSI/EIA-748)
2. Performing a combined role of technical engineering team leadership and Earned Value Management (technical, cost, and schedule integration/analysis/reporting)
3. Test station HW and SW development
4. Managing risk and opportunity
5. Conforming to Defense First Article and Qualification testing

It is highly desirable if the person is expert with Control Account Management particularly for defense contractors. Some of these CAM responsibilities/delegations include schedule planning and monthly measuring each test station development. Additional responsibilities (or delegations) for each station will include actual cost collection, variance analysis and resultant corrective action, and estimating costs at completion.
This position will require frequent meetings at the program office level, with customers, and with senior management as well as with the engineering team. Frequent bid and proposal work will be required, often times requiring considerably more than 40 work hours per week.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience.
Other required skills are outstanding verbal and written skills, in a clear and concise manner; the ability to present in a favorable and impactful way to large audiences including internal management and external customers.

Skills: Category Name Required Importance Experience
Areas of Expertise Circuit Design No 1 < 1 Year Areas of Expertise Electrical Troubleshooting No 1 < 1 Year Soft Skills Strong Leadership Skills No 1 < 1 Year Technical Skills Develop/execute test plans No 1 < 1 Year Technical Skills Electrical Testing No 1 < 1 Year Technical Skills Electronic Testing No 1 < 1 Year Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Complex Mechanical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Electrical Technology No 1 < 1 Year Technical Skills Read Electrical Schematics No 1 < 1 Year Qty 1 position Hourly Pay Rate Range $55-$85 Please note the list of Skills that are Highly Preferred
 
Job Number: LMRMS-3311-1ATO
Job Location: Marion, MA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr

Description:
Electrical engineers research, design, develop, test, certify, deploy and support cutting edge products & services. These cover a very wide range from state of the art mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll be responsible for conceptualizing and designing analog and digital electronic circuit card assemblies to fully integrated systems. Your technical responsibilities involve the design and development of new products and processes throughout the product lifecycle.
Must-haves:
• Bachelor's degree in Electrical Engineering or related Engineering discipline and typically 10 or more years of relevant experience
• Demonstrated knowledge of engineering principles and practices
• Experience with Computer Aided Engineering tools
• Experience working in multi-disciplinary design & development teams
• The ability to obtain and maintain a Secret U.S. Security Clearance is required

Preferred:

• Proficiency in simulations through functional and logical models and system analysis
• Background in the Aerospace and Defense Industry
• Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation and analysis
• Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)
• Knowledge of industry standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing and production processes
• Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
• Experience in digital or analog circuit design and schematic capture
• Understanding of the printed circuit board layout process and tools
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers

Description:
STS Technical Services is hiring Electrical Engineers in Exeter, New Hampshire.

Job Duties:
Member of new product development team
Able to work on prototypes with minimal input from the customer
Able to communicate with customers and sales people in person, on phone and by email to understand their needs, issues, concerns to provide the best product for them
Consistently initiates complex, research, design or development activities with a high degree of independence
Qualifications:
AS/BS in Electrical Engineering or Electrical Engineering Technology.
5-10 years’ of experience in Electronic Systems, Electronics Troubleshooting, Electronic Testing Design, Project Management, Quality Focus, Database Design, Analyzing Information, Reporting Research Results, and Innovation
Familiarity with temperature controllers and power controllers a plus
Able to generate and understand basic schematics
Familiar with designing and testing fuses
Experience with and/or interested in heat transfer and material science
Familiar with single and 3 phase power and basic control schemes
Benefits:

Since this is a direct hire job, our client will provide a full benefits package to you. If you would like to learn more about that package, please call 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 33080
Job Location: Exeter, NH
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician - no clearance FL

Description:
Job Title: Electronics Technician

Work Site Address: Clearwater, FL 34677
Job Number: 3370-1
Max Pay Rate: $24.00/hr
Start Date: 3/9/2020
End Date: 3/5/2021
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Adjusts and calibrates systems as required. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.
Troubleshoots to the component level. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong knowledge of Solid State devices and micro-circuitry. Works in a dynamic production environment and is able to produce at a high level in support of customer schedules. Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters.

Qualifications and Education Requirements
Basic Qualifications :
1 year of direct experience
Proficient in component level troubleshooting of solid state, digital, and RF circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.

Desired skills :
RF component level troubleshooting
Spea Flying Probe experience
ICT experience
Familiarity with Radar Systems


Typical Minimums :
High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.
This is an Electronics Technician position in a production environment. Electronics Theory, Principles, and knowledge must be evident.
Testing to component level of electronic components.

Skills: Category Name Required Importance Experience
Areas of Expertise Electronics No 1
Technical Skills Component Technical Specifications No 1
Technical Skills Data Entry No 1
Technical Skills Electronic Testing No 1
Technical Skills Radio Frequency (RF) No 1
Technical Skills Safety Standards No 1
Technical Skills Schematics No 1
Technical Skills Technician knowledge No 1

Qty 1 position
Pay Rate $18-$24/hr.
 
Job Number: LMRMS-3370-1
Job Location: Clearwater, FL
Rate: 18-24/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician MD

Description:
167627 Job Title: Electronics Technician

Work Site Address: Baltimore, MD 21220
Job Number: 3304-1
Max Pay Rate: $35.00/hr
Start Date: 2/25/2020
End Date: 7/3/2020
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
AA in Electrical or Electronics Engineering is highly preferred.

Skills: Category Name Required Importance Experience
Technical Skills IPC-J-STD Yes 1 2 - 4 Years
Technical Skills IPC-A-610 No 3
Technical Skills IPC-WHMA-A-620 No 2

Qty 1 position
 
Job Number: LMRMS-3304-1ATO
Job Location: Baltimore, MD
Rate: 35/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Test Engineer using Labview/TestStand

Description:
This is a full time, 9-12 month contract, located in Grand Prairie, TX*



We are hiring for an Electronics Test Engineer who has good C programming understanding that will design/develop/deploy test equipment hardware and software using automated tools such as LabView, LabWindows/CVI and TestStand. Responsibilities will include working on architecture, integration and producing documentation for our system emulator test stands.



Required:

*4 years' experience designing test stations using test console software with one or more of the following: Labview, TestStand, or Lab Windows CVI.
*Good documentation skills

*Some experience in C software development.
*Candidate will need to apply and gain a clearance after starting, requires applicants to be US Citizens.
*BSEE or equivalent degree



Pluses:

*RF Configuration Management Communication protocols OrbExpress and RTI

*Active Secret or Interim Clearance, preferred
 
Job Number: 255
Job Location: Grand Prarie, TX
Rate: $75.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Exhaust Processor- Exhaust- Job ID 40534

Description:
We have an Excellent Contract position for an Exhaust Processor to join a leading Company located in the Tempe, AZ area.

**U.S. Citizenship Required.
**Candidate must have the ability to obtain and maintain a Confidential Security Clearance.**

Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
The main function is to vacuum process and assemble components for the manufacture of bare image intensifier tubes for use in night vision products.
The Exhaust Processor receives the preassembled tube and loads it into the exhaust station. They then process and activate the tube and cathode under an ultra-high vacuum. The tube is then sealed and unloaded. All process data is recorded in the quality tracking system (QTS), then the tube and the accompanying paperwork are delivered to Initial Test (I-Test).
Follow written procedures and complete assigned work in a timely manner to keep production schedule while maintaining acceptable yields as determined by area supervisors and engineers.

Basic Hiring Criteria:
High School Diploma or equivalent.
Minimum 1 year of verifiable exhaust/vacuum experience within the Exhaust Processor Job Family or having a minimum of two years’ experience within the high-tech manufacturing environment with like experience and equivalent knowledge.

Desired Qualifications:
General knowledge of ultra-high vacuum technology (OJT provided).
Basic computer knowledge for data entry and email communication OJT forms and visual aids.
Basic electrical knowledge, Lock-out/Tag-out and industrial safety (OJT provided).
Use of hand tools, including but not limited to, power drivers and torque wrenches.
Use of Digital Multi-Meters (DMM), high voltage probes and general electronic equipment.
 
Job Number: 40534
Job Location: Tempe, AZ
Rate: $16.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FBW Actuation Lead Engineer

Description:
As the FBW Actuation Lead Engineer, you will report to the Flight Control System (FCS) IPT lead and be responsible for all activities related to the Fly-By-Wire actuation for the business jet. In addition to the traditional flight actuation solutions, some unique actuation technologies may be required to meet the requirements of this jet.

Your responsibilities would include:
• Develop flight control actuation design, architecture and support product plan development, including V&V, qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of flight control actuation systems
• Define requirements for the flight control actuation system to ensure compliance with regulations and customer requirements and flight control safety objectives
• Provide validation and verification of flight control actuation system requirements
• Plan and direct flight control actuation systems tests and certification, and provide system and certification documentation
• Participate in actuation modeling and simulation
• Interface directly with flight control actuation system suppliers
• Support managing the flight control actuation system scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

We're looking for someone who has:
• A Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 15+ years of deep, hands-on experience in fly-by-wire flight control actuation systems development, design, and testing in a Military, Commercial, or business aircraft development programs
• 10+ years of demonstrated experience specific to fly-by-wire flight control actuation, hardware, actuation control electronics and hydraulic servo-valve and electro-mechanical actuation and associated technologies and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including FBW flight control Special Conditions and system development per ARP4754A and ARP4761
• Experience in primary flight control actuator performance specification, integration, force-fight and monitor designs
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Ability to read, understand, and interpret the results of engineering analyses
• Team leadership, strong decision making and communication skills
• Excellent problem-solving skills across multi-disciplinary skill sets
 
Job Number: 42-039
Job Location: RENO, NV
Rate: DOE
Per Diem: Yes
Overtime: NO
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
An FPGA Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for supporting designing and developing firmware for the Digital Receiver Exciter and Digital Beamformer for the Air and Missile Defense Radar (AMDR) Program. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineer, a related specialized area or field, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

FPGA Engineer Job duties:

* Participate in all aspects of the development lifecycle including design, development, integration and test.
* Develop complex FPGA-based solutions from concept, though design, synthesis, timing analysis, UVM base verification, lab integration, formal test, and production support through product life cycle.
* Determines architecture, system simulation and detailed design approach.
* Creates test and simulation plans that establish functional criteria.

Qualifications:

* Experience with high-speed digital electronics, proper timing and debugging capabilities.
* An understanding of Digital Signal Processing (DSP) techniques and layout of high-speed digital boards.
* An understanding of Digital Signal Processing (DSP) techniques and layout of high-speed digital boards.
* Recent experience with Xilinx Virtex 6&7 with Xilinx support tool ISE and Vivado tool.
* Very High Speed Integrated Circuit Hardware Description Language (VHDL) experience and associated modeling and simulation tools.

If you are interested in this FPGA Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298353
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA/VHDL Electrical Engineer

Description:
*This is a full time, 6 month contract position, located in Wayne, NJ*



We are searching for an FPGA design/verification/test engineer. Candidate will develop requirements, specifications and documentation. Create verification plans using Universal Verification Methodology (UVM), develop RTLs, System Verilog, Test Like You Fly, etc. Candidate will perform design analysis and verifications, Insert ASIC test capabilities, and support ASIC testing.



Required
*5 years’ experience in FPGA electronics designing (PCB Boards).
*Strong HDL skills such as VHDL, Verilog
*Exposure to two or more of the following: RTL definition, verification and design, test insertions, synthesis, Static Timing Analysis, Test Pattern generation.
*Verification methodology experience with tools such as UVM/OVM.
*4 year engineering degree, preferably a BSEE



Pluses:
*Verification methodology experience with tools such as UVM/OVM.
*Experience with Mentor Graphics Modelsim / Questasim or Synopsys backend tools
•Able to program in C, C++, TCL, or scripting in PERL, Bash, Python, Ruby
•Linux experience
 
Job Number: 251
Job Location: Wayne, NJ
Rate: $83.90
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Application Engineers

Description:
STS Technical Services is hiring Field Application Engineers in Waukesha, Wisconsin.

Responsibilities as Field Application Engineer:
Work in team with a commercially focused Key Account Manager to develop new business opportunities and support existing business
Interact directly with engineering counterparts in the customer’s organization, understanding technical needs and finding solutions based on products.
Provide advice and trainings in how to apply our products and how to use our software application platform
Be the first point of contact for technical support requests
Build strong relationships with customer contacts.
Build knowledge concerning market needs and competing solutions in the market and share that knowledge with colleagues within Sales and Product Management.
Continuously improve and deepen your knowledge about our products, through close collaboration with our product development team and experts within hardware and software design.
Requirements – Must have:
Academic degree in software engineering or mechatronics, automation or work experience in similar fields
Good experience in C/C++
Strong communication and interpersonal skills with aptitude in building relationships with customers
Strong analytical skills and ability in problem-solving
Language skills: Fluent in English
Requirements – Could have (meriting):
Experience and knowledge about industrial electronics.
Good understanding of real-time control systems
Technical
Qt/Linux
Fieldbuses like CAN/J1939/CANopen
PLC-programming (IEC 61131-3)
Experience in Motion/Actuation/Control products and systems to the Automotive or Mobile Vehicle Industry
Interest and technical understanding of industrial vehicles and machinery
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34328
Job Location: Waukesha, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail

Education and Experience Requirements:
Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Flight Test Engineer Certification may offset one year of experience requirement.


Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering
 
Job Number: 148303
Job Location: Savannah, GA
Rate: $55/hr to $70
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - no clearance FL

Description:
167936 Job Title: Inspector

Work Site Address: Orlando, FL 32819
Job Number: 3498-1
Max Pay Rate: $25.00/hr
Start Date: 4/6/2020
End Date: 4/4/2021
Position Type: Contract


Job Summary:
Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices.

Works from blueprints, diagrams, calipers, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.
Perform all responsibilities of Quality Inspection of production assemblies. Have the ability to perform precision measurements by executing CMM and FARO arm programs or utilize open set up inspections. Track and record data, create need records, generate Quality notifications for all non-conformances and performing stock purge inspections. Ability to use predetermined methods and specifications to visually inspect in-process and completed products.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired Skills:
CMM experience, FARO arm experience, ability to fixture parts and execute programs
Knowledge of precision measurement tools and equipment
Knowledge and experience with SAP
* Defect Documentation
* Inspection experience
* Production experience a plus
*Familiarity with Blue Print reading/tolerance


Skills: Category Name Required Importance Experience
Technical Skills Visual Inspection Yes 1 2 - 4 Years


Qty 1 position
 
Job Number: LMRMS-3498-1
Job Location: Orlando, FL
Rate: 25/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager Specialist- Job ID 40665-

Description:
We have an Amazing Contract position for a Material Program Manager Specialist to join a leading Company located in the Redmond, WA area. Looking for someone with a strong background in aerospace procurement/supply chain, project management, earned value analysis with strong people skills. Commodity focus is on machined parts and electronics.
Able to travel nationally at a moment’s notice with the ability to create and present status reports to company leadership **
Up to 50% regional and national travel. Make sure candidates are aware of how the expense reimbursement process works **


** Candidates must be U.S. Citizens without Dual Citizenship **
**U.S. Citizenship Required.

The Materiel Program Manager Specialist will be responsible for managing the performance of suppliers supporting various Programs. This candidate will interface with procurement and the engineering community to drive the resolution of technical, schedule, and administrative material issues. The candidate will be responsible for effectively identifying supplier delivery issues, developing performance improvement strategies, and leading the implementation to support program needs and timely material delivery.

Job Responsibilities:
This position requires frequent travel to various suppliers across the country supporting programs.
This candidate will utilize their background and expertise to communicate between team members, customer counterparts, and suppliers, to assure that the hardware is compliant to purchase order requirements.
Furthermore, the candidate will be responsible for developing strategic plans to manage the performance of the supplier and integrating the aforementioned team members to successfully execute the plan.
The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
Manage supplier quality and delivery performance, identify delivery issues and coordinate solutions with suppliers, procurement, and engineering. Lead all reviews with suppliers.
Drive corrective and preventative action activity at the supplier, and provide corrective action support to manage timely and effective issue resolution and control.
Act as primary SCMM (Supply Chain/Materiel Management) interface for customer and management meetings at supplier locations.
Basic Hiring Criteria:
Bachelor’s degree.
Minimum 10 years of directly related experience or an equivalent combination of education and experience.
Must be willing and able to travel regularly to support supplier performance and program office delivery requirements.
Knowledge of Supply Chain practices, procedures, and MRP/ERP systems.
Desired Qualifications: Knowledge of Oracle ERP systems desired.



VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 40665
Job Location: Redmond, WA
Rate: 58.80
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required.
 
Job Number: 12257
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Metallic Materials Lab Technician - Mech. Testing

Description:
Non–Metallic Materials Lab Technician – Mech. Testing

POSITION OVERVIEW

Our Client is a leading international engineering company looking for engineers to service the Aerospace sector. They are seeking a Non-Metallic Materials Lab Technician.

This position is for Direct Hire.

LOCATION

Fort Worth, Texas

RESPONSIBILITIES

Primary Responsibilities:

• Operate Hydraulic Test Frames with electronic data acquisition systems to conduct both static and fatigue tests per company and / or industry standards
• Work with extensometers and strain gages to record data during testing
• Maintain computerized test routines for all test frames
• Write modified test routines when necessary (both static and fatigue)
• Ensure proper data transfer from test frames to engineering networks
• Perform minor maintenance on test frames when needed
• Work with maintenance organization to establish and maintain preventive maintenance plan for all test equipment, chambers, (heat blankets, nitrogen lines, etc)
• Work with engineers to determine best test methods for non-standard -parts and /or applications
• Work with Lab coordinator to develop and maintain test schedules

Secondary Responsibilities (to be done occasionally)

• Prepreg laying up, bagging, and curing of composite and metal bonded panels, including setting up and running an autoclave
• Adhesive bonding with both paste and film adhesives, apply primer
• Conduct of destructive testing and evaluation of various production aircraft components and write summary technical reports of the findings and conclusions
• Leading mini-projects (test requests) through all stages of completion, interfacing with the customer when needed
• Able to read and interpret computerized drawings and parts lists

REQUIREMENTS

• Associates Degree in Engineering, engineering technology, materials science, Manufacturing Technology, Mechanical engineering or commensurate advanced technical training, experience and or/certification
• 3 to 5 years working experience in materials lab or similar facility experience
• Possess a mechanical aptitude, able to with hands
• Possess very good computer skills and the ability to understand and write computer programs
• Possess very good communication and problem solving skills
• Ability to work well with internal and external customers on their test need
• Some exposure to servo hydraulic test frames , construction, maintenance and operations thereof (machines such as Instron™ machines, MTS™
 
Job Number: 224
Job Location: Fort Worth, TX
Rate: open
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Brooke Burns
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician - no clearance CA

Description:
167926 Job Title: Production Test Technician

Work Site Address: Ventura, CA 93003
Job Number: 3496-1
Max Pay Rate: $31.00/hr
Start Date: 3/30/2020
End Date: 2/1/2021
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Roles and Responsibilities
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
BA Degree is NOT Required.
HS Diploma is Required.
Experience and knowledge of electrical blueprints, troubleshooting and repairs is Required.

Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting Yes 1 4 - 6 Years
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Electrical Standards Yes 1 4 - 6 Years
Technical Skills Electrical Testing Yes 1 4 - 6 Years

Qty 1 positions
Hourly Pay Rate Range $27-$31 (Based on candidate experience)
 
Job Number: LMRMS-3496-1
Job Location: Ventura, CA
Rate: 31/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Planner / technical writing experience required - no clearance SC

Description:
167929 Job Title: Project Planner

Work Site Address: Greenville, SC 29605
Job Number: 3500-1
Max Pay Rate: $29.00/hr
Start Date: 3/27/2020
End Date: 3/29/2021
Position Type: Contract

Job Summary:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers.

Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Technical Writer - Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.

Main job junction is to write detailed instructions for determined processes

Skills: Category Name Required Importance Experience
Areas of Expertise Technical Writing Yes 9 2 - 4 Years
Soft Skills Advanced Communication Skills Yes 5 6+ Years
Software Skills MS Excel Yes 1 4 - 6 Years
Software Skills MS Office - Intermediate Level Yes 3 2 - 4 Years
Software Skills SAP No 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 9 2 - 4 Years
Technical Skills Ability to write technical documents and end-user documentation Yes 9 2 - 4 Years
Technical Skills Data Entry Yes 7 2 - 4 Years
Technical Skills Technical Writing Yes 9 2 - 4 Years

Qty 1 position
Looking for proved performance to the job description as well as the required skills.
 
Job Number: JEG-3500-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
2890-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/28/2020
End Date: 1/28/2021

Job Description:
The F-35 Shared Simulation Software team is looking for highly motivated software engineers who have at least five years of experience developing and integrating software components using C++ and Object Oriented Development analysis (OOA)/ Object-Oriented Design(OOD) techniques. The Shared Simulation Software team develops and maintains the software simulations products that support the integration, testing, verification and mission effectiveness analysis for the F-35 program.
Additional desired skills for this position include software development experience with real-time simulation operating systems, avionics software flight and sensor software.

Responsibilities may include developing simulation software to incorporate new aircraft capabilities, integrating new or updated vendor models, integrating the shared simulation software products with customer products, performing analysis of simulation results with actual sensor performance and participating as a member of an agile team.

Additional Desired Skills:
Experience with Aircraft Avionics Sensors – Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
Experience with Agile software development methodologies and tools, such as VersionOne
Experience with Linux operating systems

Region: Fort Worth, TX
Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $90.00 Hourly
 
Job Number: JE-2890-1S6
Job Location: Fort Worth, TX
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Process Engineer

Description:
RESPONSIBILITIES:
50% - Oversee and troubleshoot critical weldments ensuring best practices for weld fit-up, cleanliness requirements and weld parameters are followed.

15% - Develop weld parameters and document best practices to support production.

15% - Perform statistical process analysis of welding processes.

10% - Define weld machine/specification requirements.

5% - Perform root cause analysis and disposition discrepant hardware.

5% - Accurately report problems, solutions, and results, in concise written and oral communications. Communicate effectively between team members and customer counterparts.

REQUIRED EXPERIENCE:
Experience working with Torch Weld Jigs (TWJ), setting weldments up for exact shrinkages to fit TWJ post weld.
Experience dispositioning hardware and performing root cause analysis.
Process capability and statistical analysis experience.
Previous experience developing weld parameters for manual and In-Place-Tube or Automatic G.T.A. welding or E.B. welding.
Familiarity working with electronic planning, drawings, and pertinent documents such as weld parameters.
Demonstrated teaming skills.
Strong analytical and communication skills (written and oral) are required, along with the ability to lead teams and work in a collaborative team environment.
Experience using appropriate PPE.

PREFERRED EXPERIENCE:
Working with D17.1 or Journeyman Weld certifications.
Writing weld machine specifications.
Using electronic planning and drawings.
Moving large structures or hardware.

EDUCATION:
Accredited Bachelor's degree in Weld Engineering, Mechanical Engineer, Industrial Technology and 5 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys, or an equivalent combination of education and experience.

WORK HOURS:
9/80
Full-Time
 
Job Number: 184597
Job Location: CA
Rate: 46.31/hour
Per Diem: Split if eligible
Overtime: Not specified
Duration: 6/+ mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced Systems Engineer

Description:
A Sr. Advanced Systems Engineer job in Bloomington, MN is currently available through Belcan. In this role, you will be responsible for leading analysis, design, development, and testing of signal processing systems. You will also lead algorithm development, profiling and porting, lead functional analysis, performance analysis, detail trade studies, systems integration and test (verification), validation of system, subsystem, or system elements with little to no supervision. To be considered for this role, you will have a Bachelor's degree in Systems Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Advanced Systems Engineer Job duties:

* Lead formulating operational concepts; performing mission, functional, cost-benefit, and risk analysis; selecting systems architecture; and preparing specifications for companies' operating systems to ensure designs meet applicable specifications.
* Synthesize solutions to meet customer expectations and technical performance while staying within schedule and cost constraints.
* Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application.
* Perform or lead the development of technical strategies and teaming strategies on multiple projects.
* Lead small technical proposals and contributes to medium sized proposals.

Qualifications:

* Substantial experience specifically in Radar Signal Processing (e.g. design requirements for radar systems, tactical or simulation algorithm prototyping or implementation).
* Strong knowledge of radar signal processing and analysis.
* Proficient with MATLAB and C/C++ programming languages.
* RF background with a working knowledge of electronic scanned antennas, receivers, exciters, and digital signal processing.
* Knowledge of hardware and software integration.

If you are interested in this Sr. Advanced Systems Engineer job in Bloomington, MN, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 300265
Job Location: Bloomington, MN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Electrical Engineer Circuit Design 4 - URGENT CA

Description:
1843 Sr. Principal Engineer Circuit Design 4 (Job Number: 20003804)
Number of Openings: 5
Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach
Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Dec 31, 2021

Pay Rate: $75 to $80/hr
Work Schedule:9/80
Duration of Assignment: Up to 1 year

The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units. The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units. The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements. The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.


Basic Qualifications:
Bachelor’s Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment; OR, a minimum of 7 years of experience with a Master’s Degree in STEM
Design and test experience in digital technology

Preferred Qualifications:
Design and test experience in Analog/RF technology
Master’s Degree in Electrical or Computer Engineering from an accredited institution
Excellent written and verbal communication skills
 
Job Number: JK-1843ATO
Job Location: Manhattan Beach, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 9 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Process / Welding Engineer

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
50% - Oversee and troubleshoot critical weldments ensuring best practices for weld fit-up, cleanliness requirements and weld parameters are followed.
15% - Develop weld parameters and document best practices to support production.
15% - Perform statistical process analysis of welding processes.
10% - Define weld machine/specification requirements.
5% - Perform root cause analysis and disposition discrepant hardware.
5% - Accurately report problems, solutions, and results, in concise written and oral communications. Communicate effectively between team members and customer counterparts.

Skills:
1. Experience working with Torch Weld Jigs (TWJ), setting weldments up for exact shrinkages to fit TWJ post weld.
2. Experience dispositioning hardware and performing root cause analysis.
3. Process capability and statistical analysis experience.
4. Previous experience developing weld parameters for manual and In-Place-Tube or Automatic G.T.A. welding or E.B. welding.
5. Familiarity working with electronic planning, drawings, and pertinent documents such as weld parameters.
6. Demonstrated teaming skills.
7. Strong analytical and communication skills (written and oral) are required, along with the ability to lead teams and work in a collaborative team environment.
8. Experience using appropriate PPE.

Experience with the following is a plus:
1. Working with D17.1 or Journeyman Weld certifications.
2. Writing weld machine specifications.
3. Using electronic planning and drawings.
4. Moving large structures or hardware.

Education:
1. Requires a Bachelor's degree in Weld Engineering, Mechanical Engineer, Industrial Technology and 5 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys, or an equivalent combination of education and experience.
 
Job Number: 12216
Job Location: Canoga Park, CA
Rate: $37.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer ASIC/FPGA (VHDL) Designer CA

Description:
Staff Engineer ASIC/FPGA (VHDL) Designer (Job Number: 20004560)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.

Additional responsibilities include:
Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

Basic Qualifications:
- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree

Preferred Qualifications:
- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
 
Job Number: JK-1848ATO
Job Location: Redondo Beach, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004461)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Tasks of this role include Digital Signal Processing Architecture, particularly focused on MODEM design. The qualified candidate will be a digital DSP design engineer who will work on digital hardware development with applications in signal processing, modem design for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Simulation (Communications, signal processing)
- Requirements development & flow down
- Work with other designers, such as FPGA designer to help implement design
- Help develop test plans for testing developed hardware

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 10 years of experience;
- A minimum of 10 years of experience in DSP hardware design development
- DSP Simulation experience

Preferred Qualifications:
- 15 years of experience developing/testing Electronics for military or spacecraft applications, 10 of those in DSP design
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1847ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004358)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Feb 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Client is looking for an experienced digital board designer to join its team at the Redondo Beach, CA location.

Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Coordination with other design specialties such as packaging engineering
- Requirements development & flow down
- Support test Hardware development
- Interface analysis
- Board/unit Integration & test

Qualifications

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production

Preferred Qualifications:

- 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1846ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stock Assistant - no clearance NY

Description:
167566 Job Title: Stock Assistant

Work Site Address: Owego, NY 13827
Job Number: 3243-1
Max Pay Rate: $17.00/hr
Start Date: 2/24/2020
End Date: 2/24/2021
Position Type: Contract

Job Summary:
Stockroom worker faithfully follows standard process and safety procedures to perform a variety of stockroom functions that may include counting and verifying material received, filling back orders, packaging materials for stock, physically storing materials away, picking materials from stock to fill specific order quantities, performing other standard stock-keeping functions, while always being diligent to safeguard and prevent damage to all materials handled.

* Completes various system transactions.
* Carefully handles a variety of materials including ESD-sensitive components and hardware that range in size from less than 1 mm to over 2 feet cubed, and weighing 35 lbs or more.
* Validates system and document data visually to the physical material and count, and identifies any discrepancies.
* Performs hand counting and may use scales to ensure accuracy of counts.
* Operates various material-handling equipment, including horizontal carousels, ESD workstations, electronic scales, bag sealers, pallet jacks, and carts, along with skids, pallets and tote pans to complete work tasks.
* Uses a variety of packaging and handling methods to protect the materials from damage.
* Works with good housekeeping habits.
* Uses professional, ethical behaviors in all dealings with co-workers and internal customers on a variety of needs.
* Shifts from one work task to another, as directed, without difficulty.
* May be asked to work overtime beyond the standard work shift or on weekends, once fully trained on job tasks.

Qualifications and Education Requirements
* Safety-minded work habit
* Highly accurate workmanship, great attention to details, and thorough double-checking to ensure accuracy
* Willingness to faithfully follow the documented processes
* Good written and oral communication skills
* Good interpersonal skills with co-workers and customers
* Able to operate a computer and learn how to execute required transactions in the inventory system
* Able to learn the process steps of each task and complete the required training
* Willingness to faithfully follow the documented processes
* Capable of repetitive lifting of packages to OSHA guidelines, with no physical restrictions
* Able to stand and sit for extended periods of time
* Able to kneel, squat, bend down, stretch, walk, climb stairs and ladders, and carry materials repeatedly through the day
* Capable of fine motor/manual dexterity, strong grip, and repetitive movements and tasks
* Able to push and pull loads with material handling equipment
* Have reliable transportation to and from work
* May be asked to work overtime beyond the standard work shift or on weekends, once fully trained on job tasks.
Desired Skills
* High school diploma or equivalent
* Familiarity with Microsoft Office Applications (e.g. Outlook, Excel, Word)
* Experience in electronic component stockrooms (especially in the Defense Industry)
* Capable of obtaining/maintaining Forklift certification (stand-up reach-type) if needed
* Recent training in Electrostatic Discharge (ESD), Foreign Object Debris (FOD), Personal Protective Equipment (PPE), experience and training with Environmental, Safety and Health (ESH) procedures

Skills: Category Name Required Importance Experience
Soft Skills Interpersonal Skills Yes 1 1 - 2 Years
Soft Skills Oral and Written Communication Skills Yes 1 1 - 2 Years
Technical Skills Basic Computer Skills Yes 1 1 - 2 Years

Qty 2 positions
This person needs to be prepared to work either first or second shift as hiring need demands.
 
Job Number: LMRMS-3243-1
Job Location: Owego, NY
Rate: 17/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Experience with military vehicle systems, subsystems, or components, especially vehicle electronics and computing systems.

Experience with DOORS requirements

Experience conducting and documenting complex formal decisions and trade studies

Have knowledge necessary for requirement derivation, allocation and management.

Develop and maintain timelines, interfaces, and product structure.
 
Job Number: 48217
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - no clearance SC

Description:
167949 Job Title: Technical Writer

Work Site Address: Greenville, SC 29605
Job Number: 3501-1
Max Pay Rate: $40.00/hr
Start Date: 4/6/2020
End Date: 12/18/2020
Position Type: Contract

Job Summary:
Writes, in clear and concise language, such technical documents as procedure manuals, service manuals, and related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications.

Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, trade and engineering journals, rewrites of articles, bulletins, manuals, or similar publications.

Qualifications and Education Requirements
Required knowledge for creating Aircrew Checklist similar to existing USAF Aircrew type checklists.
Understanding of USAF type technical Manuals related to avionics upgraded systems.
Aviation Technical writing required

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1
Areas of Expertise Technical Writing Yes 1

Qty 2 positions
Need candidates with strong Technical Writing skills for USAF type Technical Manuals.
 
Job Number: JEG-3501-1
Job Location: Greenville, SC
Rate: 40/hr max
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician - no clearance MA

Description:
166647
Job Title: Technician

Work Site Addres: Marion, MA 02738
Job Number: 2462-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Exclude technicians working in production or quality assurance.

Qualifications and Education Requirements
This position does not require a BS Degree.
Technician experience

Skills: Category Name Required Importance Experience
Technical Skills Technician knowledge No 1 < 1 Year Qty 1 position Hiring Manager is looking for someone with Technician experience
 
Job Number: LMRMS-2462-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Engineer - Level 2 (3D Scanning)

Description:
****Must be U.S. Citizens without Dual Citizenship****
****Must have experience with 3D (White Light) Scan Heritage tools****

Requirements:
1. A minimum of three years of experience using 3D Laser scanning metrology equipment, preferably having used the ARTEC scanning equipment.
2. A minimum of three years of experience using the Creo solid modeling system, preferably having used the “Version 5” of this software.
3. Familiarity with converting 3D scan data into high resolution solid models.
4. Strong ability to communicate with Engineers and Machinists to translate concepts into hardware in the English language
5. Working knowledge of MS Office, MS Outlook and internet browser software.
6. Ability to work independently with a self-directed drive to accomplish tasks on schedule with high precision.
7. Ability to stand and operate scanning hardware for long periods of time, requiring stooping bending and stretching to manipulate the devices.

Responsibilities:
1. The primary role in this position is to convert existing hardware into functional, high definition 3D models for further use by Engineers and Designers in the Creo 5.0 environment.
2. This will require the ability to manipulate the scan data using the appropriate software and create clean usable solid models that are usable in Creo 5.0
3. Additional responsibilities will include working directly with Tool Engineers and Tool Designers to assure that the actual part geometry is accurately represented in the solid model.
4. Scanning may also be used to verify the geometry of tooling details before and after assembly.
5. Additional responsibilities may be requested my management to meet current technical manpower needs.

Skills:
Required:
1. Experienced in 3D-white light scanning of physical objects.
2. Allowed to use own equipment. (WE can provide 3D scanner) Model ARTEC EAX Scanner with Geometric controls and X Inspection software suite.

Desired:
1. Experienced in converting 3D White light scanned object “data cloud “ into Engineering Electronic Design Model of the scan
2. Experience using ARTEC EAV Scanner with Geometric controls and X Inspection Software Suite “we can provide this equipment”

Education:
1. High School Minimum
 
Job Number: 12321
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Back to Advanced Job Search