Job Search Results

337 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/11/29 Monday 09:19PM Pacific Time by ContractJobHunter. )

Listings 1 - 337

Go To My Job Tracker

Expand all descriptions

6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Machinist C

Description:
Chipton-Ross is seeking 2 Aircraft Machinist C's for an opportunity in New Orleans, LA.

RESPONSIBILITIES:
JOB DESCRIPTION SUMMARY
Follows general instructions, reads and interprets complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines. Develops and revises Machine Control Data (MCD) and geometry. Assists the team in resolving issues and completing job responsibilities.

DESIRED COMPETENCIES
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.

Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the teams energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

DESIRED TECHNICAL COMPETENCIES
Adhesive Materials/Processes
Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.

Client Knowledge
Knowledge of Client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Facilities Mfg Processes
Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.

General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).

General/Precision Test & Meas
Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.

Manufacturing Methods
Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.

Materials & Processing
Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).

Numerical Control Programming
Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).

Polymers & Composite Materials
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

Systems Thinking
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

WORK HOURS: 6:00AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 194314
Job Location: New Orleans, LA
Rate: $DOE
Duration: 6 Months
Input Date: 09/09/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking 40 Aircraft Mechanic II's (Electrical) located in San Antonio, TX.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
Ability and understanding of routing instructions and handling of harnesses.
Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.
Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.
Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.
Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.
Ensure that all equipment is used in accordance with established safety and operating procedures.
Perform all tasks involved in the coordination, preparation, and movement of material and tools.
Operate riding type electric powered elevating equipment to accomplish work assignment.

REQUIRED EXPERIENCE:
Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
Maintain necessary certifications, licenses and permits as required for assigned work.
Will be required to work with the guidance of more senior skilled employees and assist less senior employees.
Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.
The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.

EDUCATION:
Accredited High School Diploma or Equivalent

WORK HOURS:
Full-Time/First Shift
6:00 AM - 2:30 PM
 
Job Number: 193360
Job Location: San Antonio, TX
Rate: $DOE
Duration: 6 months
Input Date: 08/25/2021
Last Updated: 11/29/2021
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic)

Description:
PDS Tech is seeking an Aircraft Product Integrity Tester / Inspector (Level II in Fluorescent Penetrant, Eddy Current and Ultrasonic) for an open position in Coatesville PA

The ideal candidate will:
  • Inspect aircraft and component parts for structural integrity using nondestructive inspection methods.
  • Interpret nondestructive inspection test results and provide information about defects to repair center.
  • Perform nondestructive inspection on structures, components, and systems.
  • Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, and ultrasonic test equipment.
  • Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
  • Perform the inspection of modification and production aircraft for functional operation and conformance to government and company standards and specifications.
  • Inspect the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft.
  • May perform pre-flight and post-flight inspections in accordance with standard procedure on flight-proven aircraft.
  • May inspect any adjustments, repairs, or modifications made on the aircraft.
  • Must be able to work in confined spaces, elevated platforms for an extended period of time.
  • Must be willing to work off-shifts as required.
  • Must be willing and able to lift 30 lbs.

Basic Qualifications:
  • Documented proof of the minimum requirements for:
    • Level II in Fluorescent Penetrant
    • Level II Eddy Current
    • Level II Ultrasonic in accordance with NAS 410.

  • Basic Excel and MS Word Experience, ability to read blueprints.
     

Desired Skills:

  • Any other level II NAS 410 Qualifications.
  • Airframe and Powerplant Certificate preferred.

 
Job Number: 2110127910
Job Location: Coatesville, PA
Duration: 15 months
Input Date: 05/20/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PcwqQAC&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking an Assembler in Clearwater, FL. As a PDS Tech employee, you will be on assignment at Honeywell.
Hiring for 1st, 2nd & 3rd Shift 


Job Details:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary


  • Soldering jumper wires, through hole components, fine pitch components, small SMT components etc. parts vary in size and complexity.
  • Epoxy application is needed on various components of the assemblies, ranging from very small components to larger components.


  • Relies on instructions and pre-established guidelines to perform the functions of the job

Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED required
  • 3+ years of recent Assembler experience (i.e. soldering, wiring & electronics).
  • Ability to work with “fine pitch” components & detail chassis wiring
  • Good hand dexterity
  • Working knowledge of computers strongly desired
  • IPC Certification a plus
  • Good written & verbal communication skills
  • Continuous Improvement skills (6-Sigma); greenbelt is a plus
  • Good Team Player


  • Must be willing to work weekends, Holidays and extended hours on an as need basis
  • Vision Test will be required

 
Job Number: 2110141070
Job Location: Clearwater, FL
Duration: 3 months
Input Date: 10/08/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jCqtQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Looking for dedicated, flexible individual with good work ethics.
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
Blueprint Reading experience is desired.
Soldering Experience is desired.
BS Degree is not required.
 
Job Number: CJH-R-6976
Job Location: Owego, NY
Rate: $18
Per Diem: no
Overtime: Yes
Duration: 12 Months
Start Date: 11/01/2021
Input Date: 10/11/2021
Last Updated: 10/13/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 745/473-1137
Website: www.iic.com

Assembly Supervisor

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.


 
  Requirements
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following area: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.
  6.  Skills and Abilities Required:
  7. Strong problem solving, analytical, and technical skills.
  8. Strong oral and written communication skills.
  9. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  10. Experience implementing or being part of a Lean Manufacturing organizations.
  11. Demonstrated success in implementation of continuous improvement initiatives.
  12. Ability to read and interpret prints and engineering documents.
  13. Familiar with Microsoft Office (Power Point, Excel, and Word).
  14. Self-motivated with ability to foster moral amongst his/her team

 
Job Number: 2110131542
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 06/29/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Pmx9QAC&URLSource=cjhunter

Assembly Supervisor-1st Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

  Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following areas: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.

  Skills and Abilities Required:

  1. Strong problem solving, analytical, and technical skills.
  2. Strong oral and written communication skills.
  3. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  4. Experience implementing or being part of a Lean Manufacturing organizations.
  5. Demonstrated success in implementation of continuous improvement initiatives.
  6. Ability to read and interpret prints and engineering documents.
  7. Familiar with Microsoft Office (Power Point, Excel, and Word).
  8. Self-motivated with ability to foster moral among his/her team.

 
Job Number: 2110131461
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 07/21/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PmiBQAS&URLSource=cjhunter

Autoclave Operator Tech II

Description:
PDS is seeking an Autoclave Operator Tech II for an open position in Tulsa, OK

Position Purpose:



In a team oriented work environment, under moderate supervision assists with the set up and operation of autoclaves and auxiliary equipment to cure and bond metallic, fiberglass and carbon fiber aircraft parts in a production environment. 


Essential Functions:



  • Basic set up and operation of autoclaves and auxiliary equipment to cure and bond metallic and nonmetallic aircraft parts and assemblies according to Gulfstream specifications.
  • Reads and interprets electronic travel documents and related paper work
  • Assists with the selection of parts and assemblies for simultaneous bonding, based on similarity of processing requirements and autoclave capacity.
  • Assists with the arrangement of bonding racks and tools containing parts and assemblies and strategically loads and positions racks in autoclaves. 
  • Connects thermocouples and vacuum lines to fittings on parts and ports and thermocouple plugs inside the autoclave.
  • Populates and confirms required part number, thermocouple and vacuum port information into autoclave computerized operating system.
  • Adjusts manual controls and/or enters commands into computerized operating system to regulate and activate autoclave power supply, cooling system, vacuum, heat and pressure gauges and recorders.
  • Monitors instruments, switches, and recorders and listens for warning signals during autoclave operation to ensure conformance to specifications.
  • Maintains a neat and orderly work area, supports the company FOD and 5S program, and complies with all safety regulations.
  • Retrieves lay-up tools from tool storage and preps, releases and places tools in bond room for lay-up operation.
  • Break down and cleaning of tools containing cured parts.
  • Storing of cleaned tools in specified storage area. 
  • Ensures that parts, lab samples, and related paper work are processed and taken to proper location. 



Education and Experience Requirements:




  • High School diploma or GED.
  • Two (2) years related autoclave operational experience.


Other Requirements:
1. Must have a basic knowledge of computers and related operational systems.
2. Must have valid drivers license to obtain GAC cart and forklift license.
3. Must possess and use a Q-Stamp to include all approved processes associated with autoclave operations. New hires will be required. to obtain a Q-Stamp and should have autoclave certification within twelve (12) months.
4. Must be able to read and interpret blue prints.
5. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6 scale, 1 micrometer, 6 dial caliper.
6. Must have good operational understanding of overhead cranes, forklifts and electric tow mules and all other tools required. to perform the job.
7. Must have basic ability to read, comprehend and implement Gulfstream manufacturing procedures as well as the mathematical ability to calculate autoclave run times, appropriate temperature/pressure settings and expiration date and times for parts being bonded.

 
Job Number: 2110139890
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 09/16/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j8jwQAA&URLSource=cjhunter

Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Avionics Installer I

Description:
PDS Tech is seeking an Avionics Installer I for an open position in Savannah, GA.   

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. 2. Assists with the completion of tasks within allotted time frame. 3. Assists with maintaining required logs and records. 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Performs other duties as assigned. 

 

Education and Experience Requirements: 



  • High School diploma/GED.
  • General knowledge of applicable regulatory requirements and customer specifications.
  • Must know how to use a multimeter.
  • Entry level position.
  • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.


Unique Skills:



  • Must be able to use Avionics/Electrical hand tools.



Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.


 
Job Number: 2110139135
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/06/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j5wIQAQ&URLSource=cjhunter

Avionics Installer Sr.

Description:
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions: 1. Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. 2. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 3. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways 4. Assists Engineering in resolving problems and makes repairs per engineering direction. 5. Maintains required logs and records. 6. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 7. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 8. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Coordinate shift changes in team leaders absence. 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 4. Assists and fills in for team coordinator as required. 5. Performs other duties as assigned. 

 

Education and Experience Requirements:
High School diploma/GED.
Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field.
Ability to read and interpret blueprints and schematic diagrams.

 

Unique Skills:



Understanding of aircraft wiring drawings



Other Requirements:
1. Possess a working knowledge of the Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications.
2. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule.
3. Strong written and verbal skills required.
4. Computer keyboard skills necessary.

 


 
Job Number: 2110136065
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/20/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Q0TxQAK&URLSource=cjhunter

Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 11/29/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Unique Skills:



  • Experience with aircraft troubleshooting 

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110136339
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/03/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iwPjQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.



 



Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.



 



 



 

 
Job Number: 2110138055
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/30/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j1mKQAQ&URLSource=cjhunter

Avionics/Electrician Mechanic

Description:
PDS Tech, Inc. is seeking candidates for an Avionics Electrician/Mechanic position in Mobile, AL. 

Position Summary:



To conduct, maintain, test and repair electrical/electronic systems and components in accordance with the repair stations, FAA's and manufacturer's airworthiness and maintenance standards. This position is "safety sensitive"; therefore all FAA required compliance will be followed.



Primary Responsibilities:



  • Perform all maintenance in accordance with FAA approved data and to the standards of good workmanship as required by the Company
  • Keep safety of flight in the forefront at all times in the production of an airworthy product.
  • Perform routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; perform complete operational and functional checks on navigation, communication and flight control systems including instrumentation and pitot static installations, etc.
  • Fabricate wiring harnesses, installs/modifies avionic and electrical systems.
  • Determine when a component should be repaired or replaced; decide necessary repair schemes and quantity and type of parts needed to accomplish proper repair.
  • Follow approved maintenance procedures, consulting internal procedures and technical data FAA approved.
  • Perform serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Complete work package documentation with sign off after finishing all designated operations.
  • Perform installation of avionic equipment.
  • Interpret avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies.
  • Adjust, repair, or replace malfunctioning components or assemblies, using hand tools and soldering equipment.
  • Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering equipment.
  • Interpret flight test data to diagnose malfunctions and systemic performance problems.
  • Set up and operate ground support and test equipment to perform functional test of electrical and electronic systems.
  • Troubleshoot, repair, rework, and modify worn or defective assemblies, components or systems.
  • Suggest improvements to processes and procedures.
  • Satisfy work schedule requirements.
  • Plan and perform work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment.
  • Advise operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components.
  • Inform appropriate management and line mechanics of potential electrical/ mechanical problems and inherent dangers involved.
  • Perform preventive maintenance functions as directed.
  • Assist maintenance personnel with technical troubleshooting.
  • Assist and train other maintenance and/or other technical level employees.
  • Maintain all hangar and shop tools and equipment in a serviceable condition.
  • Ensure assigned work area is kept clean and free of hazards to both personnel and the aircraft.
  • Follow all necessary safety precautions; hearing and eye protection, use of chemicals, engine and propeller hazards, fall protection, etc.
  • As a "safety sensitive" position, this position requires that the employee be able to work in a constant state of alertness and safe manner as an essential job function.
  • Comply with OSHA Safety Regulations.
  • Participate in on-the-job training as required.
  • Observe safety procedures and personnel policies.
  • Regular attendance required as outlined in company policy.


 


Additional Responsibilities:



Education:


 

  • Certified by FAA with a current Airframe and Power Plant license is preferred.
  • FCC 2nd Class License preferred
  • 3-5 years of proven experience in the electrical/electronics, and the ability to demonstrate proficiency in these areas.
  • Proficiency with interpretation of avionic/electrical wiring diagrams, wire identification, harness fabrication, cables, fittings, circuits and connectors.
  • Thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes.
  • Ability to inspect and install digital avionics equipment.
  • Ability to work quickly and efficiently while ensuring quality work.
  • While performing the duties of this position, the employee is regularly required to stand; use hands and fingers to handle or feel, talk or hear and have good visual abilities.
  • Will often be required to sit, climb or balance and work in close quarters.
  • Must be able to work well with all levels of personnel whether individually or in a team environment.
  • High degree of precision working with minimum tolerances required.
  • Must be safety conscious at all times.
  • Able to lift or help lift up to 50 lbs.
  • Note: Noise level may be loud at times.
  • Previous experience on turbo prop aircraft preferred.
  • Must understand, read and write proficiently in the English language to read and understand appropriate manuals, schematics, and technical information necessary to adequately perform duties.


Experience:



  • Prior avionics experience is required.
  • Prior experience in aircraft maintenance required.
  • Familiar with turbo prop aircraft is a plus.


Licensure/Certifications:



  • Certified by FAA with a current Airframe and Power Plant Mechanic license is a plus.
  • FCC license is not required; but is a plus.


Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):



  • English language is required; bilingual in Spanish is not required, but is a plus.


Travel Required:



  • 10% Potential Domestic and International travel


Eligibility:



  • Authorized to Work in the US


Physical Requirements:



Sitting, Standing, Squatting/Kneeling, Walking, Speaking, Hearing, Vision, Manual Dexterity, ability to work in somewhat confined spaces.



Special Requirements:



This role will require participation in a rotating shift schedule approximately every three months to work the following shifts:



1st shift - 5:00 AM - 3:30 PM



2nd Shift - 3:30 Pm - 2:00 AM


 
Job Number: 2110140163
Job Location: Mobile, AL
Duration: 6 months
Input Date: 09/23/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Avillion
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j9vPQAQ&URLSource=cjhunter

Avionics/Structural Aircraft Mechanic (Interim Secret or Secret)

Description:
PDS Tech is seeking an Avionics/Structural Aircraft Mechanic for an open position in Patuxent River MD.  An Interim Secret or high security clearance is required

The ideal candidate will perform maintenance of flight test instrumentation for flight test programs.  They must be able to read and understand technical drawings, basic electronic wiring practices, basic electronic systems operations, and mechanical assembly of electronic components.



The candidate must be able to execute electrical (AVIONICS) / structural (MECHANIC) modifications with minimal supervision on multiple VH-92A aircraft.


The candidate may be required to maintain, troubleshoot, repair and service aircraft and engine systems, and perform other ad-hoc maintenance.

The candidate will be required to work alongside SAC Quality Leads to review/accept work and make appropriate aircraft log entries.

The candidate must be able to:
  • Follow and work to aircraft schematics, prints, and/or other approved technical publications. 
  • Have a comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation or manufacturers' manuals.  


Support may include:

  • Disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective parts on or off aircraft.
  • Adjusting, repairing, or replacing structures/ systems and aircraft components, systems, or accessories.
  • Perform other duties as requested to support overall contract effort or customer Aviation maintenance support.


Shift coverage will vary based on business requirements
Required Skills:
  • Minimum of 5+ combined years of rotary maintenance experience on the S-92 or other client product variants
  • Interim Secret or high-security clearance required.
  • Shift coverage will vary based on business requirements

 
Job Number: 2110137715
Job Location: Patuxent River, MD
Duration: 3 months
Input Date: 08/25/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j0qLQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Supply Chain Analyst

Description:
A Buyer/Supply Chain Analyst in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will thrive in a fast-paced role, and will work on supply chain and inventory management tasks in order to develop and maintain robust operational performance, and optimize production throughput, quality, and cost. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Buyer/Supply Chain Analyst job duties:
* Maintain supply chain obligations including but not limited to delivery lead-times, budget requirements, supplier/vendor relationships, quality and function specifications
* Source and procure all components, effectively and efficiently
* Maintain and improve a physical inventory organization system to ease material replenishment review, including subsequent purchases as required to fulfill production demands
* Communicate with supply base to ensure on time delivery and elevate delivery requirements, as needed, to meet production goals;
* Prepare and send RFQs; Create RMAs and shipments
* Complete incoming inspections of materials in a timely manner;
* Perform 'kitting' of jobs as sales orders are received and inventory needs are defined;
* Create and maintain appropriate documentation including, but not limited to, traceability materials/certifications, workflows and quality records;
* Monitor supplier and production controls and measures for existing and new products;
* Participate in or support troubleshooting and root-cause analysis of quality events; support process owners in the planning and implementation of corrective measures;
* Lead or support negotiations with customers concerning fulfillment of their quality demands and/or resolution of quality deficiencies including preparing customer-facing documentation;
* Support the implementation of an AS9100 quality management system.

Qualifications:
* Bachelor of Science in Engineering or a related field from an accredited college or university;
* Prior experience or training in quality assurance, supply chain, or manufacturing preferred
* High degree of competency in Microsoft applications including Word, Excel, Project, and Outlook
* Proficient in the use of CAD systems (Solidworks or NX preferred) and able to work with/interpret engineering drawing
* Understanding of manufacturing methods (such as machining, forming, soldering, and fabrication)
* Understanding of electronic assembly materials and processes
* Familiar with Military / Aerospace specifications and compliance systems such as MIL-STD-810, MIL STD-461, and DO-160.
* Experience with project management, documentation practices and with AS-91000 preferred
* Occasional travel required.
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE



If you are interested in this Supply Chain Analyst job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 316589
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/25/2021
Last Updated: 11/01/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

CAD Designer 4

Description:
PDS is seeking a CAD Design Engineer in Palm Bay, FL

Active Top Secret/SCI Clearance is required 

Job Description:

Performs a wide range of CAD design assignments in support of the mechanical engineering organization including the creation of models and/or layout drawings from sketches, notes provided by engineering. This position will lead CAD design tasks assuring that the design documentation complies with the program requirements, organization’s processes and industry standards. Prepares accurate drawings and schematics with proper tolerances, dimensions and instructions. Essential functions include:
  • Work with large, complex CAD design initiatives of substantial importance to the organization with minimal oversight or direction.
  • Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches.
  • Makes significant improvements in CAD design processes, systems, or products.
  • Provide technical oversight to more junior CAD designers
  • Mentor CAD designer in drafting best practices, tolerancing and standards.  
  • Provide CAD support (PTC Creo) throughout the product development process
  • Generate and/or modify product’s models, drawings and documentation
  • Maintain and control mechanical digital data files and drawings
  • Prepare and incorporate engineering change orders
  • Input data and manage hardware structures in a Product Data Management tool
  • Identifies problems/issues in CAD design/drawings and provide corrective actions.
  • Compliance with command media & standard

Qualifications:
  • Active TS/SCI security clearance is required 
  • Comprehensive knowledge in the product development process.
  • Associate Degree and minimum 10 years prior related experience.
  • Bachelor’s Degree and minimum 6 years prior related experience.
  • Have broad knowledge of project management
  • Proficient with 3D CAD tools, specifically PTC Creo Parametric.
  • Knowledge of applicable government and industry standards
  • Strong understanding of the ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.

Preferred Additional Skills:

  • In-depth knowledge of project management is highly desired
  • Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
  • Previous experience in supporting the design of ground structures, mechanisms, electronics packaging, and/or composite structures

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments throughout the U.S. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Kerry Moreland at 972-532-3584 or kmoreland@pdsdefense.com for more information.
 
Job Number: 2110140065
Job Location: Palm Bay, FL
Duration: 12 months
Input Date: 09/28/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kerry Moreland
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j9aJQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer 4 - Top Secret / SCI

Description:
Active Top Secret/SCI Clearance is required

Job Description:

Performs a wide range of CAD design assignments in support of the mechanical engineering organization including the creation of models and/or layout drawings from sketches, notes provided by engineering. This position will lead CAD design tasks assuring that the design documentation complies with the program requirements, organization’s processes and industry standards. Prepares accurate drawings and schematics with proper tolerances, dimensions and instructions.

Essential functions include:
Work with large, complex CAD design initiatives of substantial importance to the organization with minimal oversight or direction.
Communicates within and outside of the organization to explain and influence changes to practices, processes and approaches.
Makes significant improvements in CAD design processes, systems, or products.
Provide technical oversight to more junior CAD designers
Mentor CAD designer in drafting best practices, tolerancing and standards.
Provide CAD support (PTC Creo) throughout the product development process
Generate and/or modify product’s models, drawings and documentation
Maintain and control mechanical digital data files and drawings
Prepare and incorporate engineering change orders
Input data and manage hardware structures in a Product Data Management tool
Identifies problems/issues in CAD design/drawings and provide corrective actions.
Compliance with command media & standard
Qualifications - External
Qualifications:
Active TS/SCI security clearance is required
Comprehensive knowledge in the product development process.
Associate Degree and minimum 10 years prior related experience.
Bachelor’s Degree and minimum 6 years prior related experience.
Have broad knowledge of project management
Proficient with 3D CAD tools, specifically PTC Creo Parametric.
Knowledge of applicable government and industry standards
Strong understanding of the ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
Preferred Additional Skills:
In-depth knowledge of project management is highly desired
Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
Previous experience in supporting the design of ground structures, mechanisms, electronics packaging, and/or composite structures
PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries. These are long term assignments throughout the U.S. Client is accepting resumes now for review. Please connect with us now for immediate consideration.
 
Job Number: 2110140065
Job Location: Richardson, TX
Rate: Provide Your Rate
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 09/30/2021
Last Updated: 10/13/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Kerry Moreland
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

CAD Designer Specialist

Description:
PDS Tech is seeking CAD Designer Specialists near Wilmington, MA. 

This position will be responsible for providing Design support to customer-funded programs and internal research efforts within our Intelligence, Surveillance and Reconnaissance (ISR) business units. Our intelligence, surveillance, and reconnaissance (ISR) solutions serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability airborne and space-based remote sensing payloads that offer active and motion imaging and data processing, exploitation, and dissemination. We also provide solutions that map and monitor the earth for a variety of commercial and governmental users.

Responsibilities:
  • Provide CAD support (Autodesk Inventor) to engineers and other designers.
  • Generate new drawings and documentation, as well as modify existing drawings and documentation.
  • Manage and control mechanical digital data files and drawings.
  • Prepare and incorporate engineering change orders.
  • Input data and manage hardware structures in a Product Data Management tool (Vault).

Qualifications:
• Associates Degree and a minimum of 8 years of prior related experience or Bachelor’s Degree and a minimum of 4 years of prior related experience, or equivalent.
• Bachelor’s Degree and a minimum of 2 years of prior related experience or 2 years post-Secondary/ Associates Degree and a minimum of 6 years of prior related experience

Preferred Additional Skills:
• Expert knowledge in 3D parametric CAD modeling and PDM systems. Experience with Inventor and Vault highly desirable.
• Strong mechanical aptitude and general understanding of manufacturing and assembly techniques.
• Knowledge of applicable government and industry standards including ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques.
• Strong understanding and application of Geometric Dimensioning and Tolerancing.
• Previous experience in designing electro-optical and opto-mechanical payloads and sub-systems for aerospace & military defense applications.
• Experience in developing interfaces between spacecraft, payload systems, and sub-assemblies is highly desired.
• Previous experience in supporting the design of space structures, mechanisms, electronics packaging, and/or composite structures.
• Outstanding oral, written and presentation skills for interfacing with senior management and customers.
• DOD secret security clearance desired.

Security Clearance:
Please be aware this position requires the ability to obtain a Security Clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

 
Job Number: 2110135056
Job Location: Wilmington, MA
Duration: 6 months
Input Date: 07/19/2021
Last Updated: 11/29/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PxeIQAS&URLSource=cjhunter

Defense CNC Programmer

Description:
A CNC Programmer job is currently available at Belcan in Wichita, KS. This is a full time, direct position with Belcan and comes with full benefits. Great matching candidates will have several years of CNC Programming and hands on experience in a shop floor & assembly environment. You will be a vital team member on large and medium size programs and projects, presenting information as needed, and ensuring critical customer needs are met.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

CNC Programmer Job Duties:
* Provide numerical control, machining, and programming technical expertise to support 4 / 5 axis machining and turning NC programs
* Develop programs from model-based definition using assigned CAM software: CATIA
* Utilize Vericut validation software for NC program
* Analyze blueprints, engineering models, and electronic controls to support NC programming
* Work with CNC machine operators to optimize or modify programs as required
* Plan, create, verify, and revise machine control data and documentation that directs the operations for numerically controlled machines
* Develop a tooling list for each program
· Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and
programming, cutting tools, components and parts, unique parts, scrap, etc.

CNC Programmer Qualifications:
· Five to 15+ years of relevant work experience as a CNC Programmer/ Manufacturing Engineer.
· Proficient CATIA knowledge; we will consider experience with other CAM software
· Experience and working knowledge of manufacturing process, assembly, and fabrication process.
· Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
· Experience creating and updating technical documents, reports, and standards.
· Excellent oral and written communication skills.
· Extensive understanding of product engineering concepts and applications.
· Ability to be a self-starter with potential for technical leadership and guidance.
· Strong analytical reasoning and problem-solving skills.
· Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.

Desired but not required skills:
· Mechanical aptitude and an understanding of design for manufacturing concepts.
· Hands on experience in the shop/manufacturing environment
· Understanding of Mechanics of Materials and Structural Design.
· Knowledge of CAD Modeling (2D, 3D).
· Proficiency in MS Office products
· Experience with Cost reduction.
· Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this CNC Programmer job Wichita, KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 312574
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
City, State: Belcan - Recruiting
Email: kfabing@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=312574&job_number=312574

CNC Programmer

Description:
A CNC Programmer job in Los Alamitos, CA is currently available through Belcan. In this role, you will be responsible for the managing, programming and maintenance of computer numeric controlled (CNC) equipment for prototype (first run) and production of composite parts within the facility. To be considered for this role, you will have a High School Diploma, or equivalent, plus 5-7 years of relevant experience.

CNC Programmer Job duties:

* Review electronic or written blueprints or specifications for a job
* Review and obtain proper tooling
* Program extremely close tolerance parts
* CNC program in Mastercam (2020) 3, 4, and 5 axis geometry, proving out programs prior to machining, machining of parts and tools through CNC machining on 3-axis vertical mills, Large Capacity 5-axis CNC Router, 2 axis lathe and manual machining
* Work with operators, program managers, engineers to determine project scope, schedule and important job details
* Determine methods, tooling, feeds, speeds and all other necessary requirements necessary for manufacturing of parts
* Machine composite materials including carbon, fiberglass, honeycomb, and others
* Direct or train other employees in machine setup, running, maintenance and cleaning
* On occasion, you may be asked to work irregular hours to accommodate manufacturing schedules
* Keep program managers informed of operations, problems, and opportunities as they arise
* Maintain appropriate records and documentation

Qualifications:

* Prior experience with MasterCAM programming
* Programming 3, 4 and 5 axis Mill & 2 axis Turn equipment
* Must have strong GD&T knowledge to interpret engineering drawings from sketches, determine cutting or grinding tools to be used, method of holding, and machine speeds and feeds
* Varied CNC operating experience desirable
* Must have worked in CNC programming demonstrating a high degree of proficiency
* Experience machining a variety of materials.
* Solid understanding of manufacturing processes for layup, trim, and assembly of composite hardware
* Previous experience working in a fast-paced production environment with high quality requirements; example military, aerospace or medical equipment highly preferred
* Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
* Ability to read/interpret engineering drawings and specifications
* Able to perform basic mathematics (addition, subtraction, multiplication, division)
* Ability to identify composite damages


If you are interested in this CNC Programmer position in Los Alamitos, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314467
Job Location: Los Alamitos, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
City, State: West Region
Email: sswatkins@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=314467&job_number=314467

Certification Engineer

Description:
The position will be responsible for showing compliance to FAA regulations by following Certification Organization Designation Authorization (ODA) Procedures, FAA Order 8100.15 and FAA Order 8110.4 to prepare data packages for aftermarket Supplemental Type Certificates (STC’s). This position exercises independent judgment with regard to the resolution of problems and interaction with internal and external departments, outside vendors, subcontractors and consultants, ODA Unit Members (UM’s) and customers.


PRIMARY RESPONSIBILITIES INCLUDE:
• Understand, plan and execute certification activities in accordance with Engineering policies, procedures, work instructions, customer specific requirements and FAA guidance.
• Interfaces and communicates with Program Management, Engineering, ODA administrator, UM’s and ODA Staff, all branches of the FAA, and customers as necessary. Provides certification guidance and or interface to and or their subsidiaries when necessary.
• Manage the STC project by providing work estimates, tracking progress according to schedule, coordinating with the Program Manager and Project UM’s, and supporting technical discussions with customers.
• Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
• Develop, edit and contribute to reports supporting certification activities such as FAA Project Specific Certification Plans (PSCP), Conformity Inspection Plans (CIP), Project Notification Letters (PNL), Requests for Conformity (RFC), Type Inspection Authorizations (TIA), Compliance Reports, etc.
• Coordinates with Engineering and/or UMs for the preparation of all substantiating documents required to show compliance with appropriate 14 CFR Parts per project Compliance Checklist, including but not limited to structural compliance documents, electrical substantiation, electrical load analysis, test plans, test reports, Instructions for Continued Airworthiness (ICA), etc.
• Review substantiating documents such as test plans, reports, analyses, drawings, etc., to ensure they agree with requirements outlined in the PSCP.
• Responsible for tracking, evaluating and incorporating incoming comments from the FAA and UMs.
• Responsible for populating and maintaining certification status and comments to the project Rolling Action Item List (RAIL) specific to each project.
• Responsible to obtain FAA approvals (8100-9, 8110-3) from Certification ODA UMs for compliance documents and ensure all 14 CFR Regulations are 100% accurately indicated, and 100% in agreement with the associated Compliance Checklist and the document being approved.
• Responsible for final file cleanup (both paper and electronic copy) of all certification and technical data before each project is closed and submitted to the ODA.
• Oversees preparation of, and audits the certification project close-out packages, prior to submittal to the ODA administrator.
• Coordinates with foreign certification agencies regarding validation efforts on FAA issued STCs.
• Performs maintenance and updates of electronic project files.
• Provide certification support and expertise to Business Development activities as required; including certification guidance and input for development of Statement of Work and Bid Packages.
• Will be involved in continuous improvement efforts and development of ways to become more efficient while maintaining high standards and meeting FAA/ODA requirements.
• Other duties as assigned.
job descriptions are meant as summarizations only. They do not necessarily reflect all duties and responsibilities of a position.

ESSENTIAL FUNCTIONS:
• Minimum physical requirements to perform all duties and responsibilities, as defined by management
• A wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered
• Ability to perform with minimal supervision. Work may be performed without established procedures
Note. Ability to obtain/maintain a security clearance may be required

EDUCATION/EXPERIENCE REQUIRED:
Job Title Typical Experience
Certification Engineer I 0 - 2+ Years
Certification Engineer II 3+ Years
Senior Certification Engineer I 6+ Years
Senior Certification Engineer II 8+ Years
• BS/BA in engineering discipline or equivalent experience
• A solid understanding of 14 CFR, Parts 21, 23, 25, experience with Parts 27 and 29 a plus
• 6+ years of experience in FAA aircraft certification activities
• Strong knowledge and understanding of the FAA certification process
• Experience with STC certification development in a repair station, MRO or another ODA
• Technical writing experience required
• Effective interpersonal skills within an engineering environment influencing the success of a program
• Must have excellent written and oral communication skills and the ability to motivate others
• Must be able to think quickly and make sound decisions in regards to aircraft issues
• Must be a self-starter, solution focused, with a positive attitude
• Familiar with commercial technical publications, requirements, and processes
• Familiar with computer-aided design and drafting packages
• Proficiency in intranet/internet environment and Windows operating systems is required
• Proficient with MS Office and MS Project or related project tracking system





The Structures Company LLC is an AA/EOE
 
Job Number: 520
Job Location: Wichita, KS
Rate: $60/Hr.
Per Diem: Yes
Overtime: No
Duration: 6 months to 1 Year
Start Date: ASAP
Input Date: 11/04/2021
Last Updated: 11/29/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Chemical Technician

Description:
PDS Tech, Inc. is seeking a Chemical Technician / Formulation Technician in Milwaukee, WI 

How will you make an impact?
The Chemical Technician / Formulation Technician is responsible to



  • perform equipment cleaning,
  • staging of manufacturing materials,
  • manage and handle hazardous waste according to current procedures,
  • maintain accurate physical and electronic inventory levels by correctly issuing materials in the system.


What will you do?



  • Follow established methods and standard operating procedures
  • Prepare chromatographic supports and reagents
  • Packing and un-packing of chromatographic columns.
  • Clean and maintain production equipment, clean and organize storage, laboratory and receiving areas
  • Follows World Class Manufacturing or continuous improvement guidelines to support Operations
  • The position is also responsible for any other duties apparent or assigned


 





    How will you get here?
    Education:



    • Associates degree in Science (Chemistry is preferred) or High School diploma/GED

    Experience:

    • 1-2 years’ active experience in handling chemicals, glassware and equipment
    • Ability to read, understand and follow work instructions. Ability to convey pertinent written and verbal information
    • Basic mathematical skills (including knowledge in use of the metric system, conversions, and calculations)
    • Ability in the use of electronic systems (computer etc.) and MS office (word, excel) knowledge
    • Comfortable in handling chemicals, solvents, and potentially hazardous/bio-hazardous substances
    • Must be available to work overtime, including weekends as production schedule warrants

    Physical Requirements:
    While performing the duties of this job, the employee is frequently required to walk, sit, stoop, stand, bend, kneel, crouch and crawl. Also use hands to finger, handle, manipulate, or feel objects, tools, and controls

    • The employee frequently lifts and/or move 50 pounds and occasionally lift and/or move more than 50 pounds with assistance
    • Specific vision abilities required for this position include close vision, distant vision, depth perception and the ability to adjust focus and differentiate between basic colors.
    • Must understand and comply with RCRA Standards by successfully completing initial training for Hazardous Waste Handling within 90 days of date of hire, comply with standards, and annual training.



     




       
      Job Number: 2110131111
      Job Location: Milwaukee, WI
      Duration: 6 months
      Input Date: 06/21/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Len Foy
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PlmZQAS&URLSource=cjhunter

      Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1

      Description:
      Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
      12 month contract

      Pay rate: $55-60/hr W2

      Analog / Mixed-signal Circuit Design Engineer

      Electrical engineer to design board level electronic circuits and equipment for aerospace avionics.
      Requirements:
      -BSEE and 5 years, or MSEE and 3 years of mixed signal circuit design experience.
      -Proficiency with simulation, Pspice and Cadence Schematic Capture.
      -Proficiency in hardware troubleshooting / software debugging.
      -Physical testing experience including proficiency with lab measurement equipment (oscilloscope, logic analyzer, etc).
      -Ability to clearly communicate complex technical concepts verbally and in written form.
      Position includes generation of design documents, specifications, user's manuals, test plans, analyses, etc.
       
      Job Number: 4016-1
      Job Location: Chandler, AZ
      Rate: 60
      Per Diem: Yes
      Overtime: yes
      Duration: 12 months
      Start Date: ASAP
      Input Date: 10/05/2021
      Last Updated: 11/28/2021
      Firm Name: TALENTPRO CONSULTING
      Attention: Angelia
      Address: 402 N B ST
      City, State: FAIRFIELD, IA 52556
      Phone: 641/209-3000 X201
      Fax Phone: 641/209-3001
      Email: Angelia@talentproconsulting.com
      Website: www.talentproconsulting.com

      Conformity Management Engineering Lead

      Description:
      General Summary:

      Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection
      Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successufully plan conformity plannning.
      Provide accurate and concise reports that reflect current status and trends.
      Recommend actions to correct possible deviations and / or concerning trends
      Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.


      Duties and Responsibilities:

      Coordinate the work and support the team that will:
      Reconcile what is planned to be conformed to data in company system
      Entry of “Required Conformity” in Company electronic form
      Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
      Support the creation of RFCs in Teamcenter
      Reconcile / ensure existence of QRs for released drawings requiring conformity
      Create and keep updated a “database” to hold or connect the following information
      Enter SCM information in the RFC
      Track the completion of RFC in Teamcenter
      Enter RFC information in NACIP
      Reconcile RFC needs with what SAP QNs that track it have
      Create associated reports
      Communicate status to management and other departments
      Follow up on DERs answers to Discrepancies


      Qualifications

      Education, Work Experience, Certificationa and/or Licensure

      BS in Data Management / Business Administration / Engineering
      Mininum of 5 years working with FAA related processes of conformity inspection
      Excellent data analysis and communication skills
      Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
      Proficient user of Microsoft Office tools, especially Excel


      Knowledge, Skills, and Abilities:

      Ability to adapt to and work effectively within a dynamic environment
      Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations;
      Ability to present effectively to diverse and demanding audiences.
      Personality requirements
      Persistent
      Excellent negotiation skills
      Reliable
      Self motivated
      Pro-active
      Focused
      Works well in teams and minimum supervision
      Flexible
      Goal and detail oriented

      The Structures Company LLC is an AA/EOE
       
      Job Number: 516
      Job Location: Greensboro, NC
      Rate: $55-$65/Hr. **DOE**
      Per Diem: Yes
      Overtime: Possible
      Duration: Long Term Contract
      Start Date: ASAP
      Input Date: 09/20/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Debbie Aubert
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: Debbieaubert@thestructurescompany.com
      Website: www.thestructurescompany.com

      Construction Inpector

      Description:
      Chipton-Ross is seeking a Construction Inspector for an opening in San Diego, CA.


      RESPONSIBILITIES:
      Monitor construction sites periodically to ensure overall compliance.
      Use survey instruments, metering devices, and test equipment to perform inspections.
      Inspect plumbing, electrical, and other systems to ensure that they meet code.
      Verify alignment and level to ensure equipment installation meets specifications.
      Issue violation notices and stop-work orders until building is compliant.
      Keep daily logs, including photographs taken during inspections.
      Provide written documentation of findings.
      Review plans to ensure they meet codes, local ordinances, and contract specifications
      Establish and maintain electronic files for submittals, select correspondence, supplemental instructions, sketches, Requests for Information (RFI), and Requests for Changes (RFC).
      Check and verify all materials stored on and off site for payment as well as materials used in site construction against submittals and check and verify the installation of materials and equipment.
      Inspect welded piping, threaded piping, grooved piping, equipment anchoring, grout framing and pouring, equipment alignment, electrical power construction, re-bar, concrete framing and pouring, painting, electrical controls, punch lists, dismantling/disassembly, demolition, utility locating, asphalt paving, asbestos and lead paint abatement, earth work (fill, porous fill, etc.), and safety of personnel during construction.
      Present Environmental, Health, and Safety (EH&S) requirements to contracted workers coming onsite, review plans for safety concerns, and monitor job site for safe practices.
      Create punch lists and see-to correction of defective work.
      Must be able to work extended hours and travel in California on occasion.
      Performs other duties as assigned.

      REQUIREMENTS:
      Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to building construction and maintenance. Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites. Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones. Must be customer focused and possess: (1) a valid California driver's license with a good driving record verified by the DMV; (2) the ability to identify issues, analyze and interpret data; (3) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (4) strong interpersonal skills to influence and guide all levels of employees; (5) the ability to maintain the confidentiality of sensitive information; (6) the ability to select, train, and motivate personnel; (7) the ability to represent the company on external projects; and (8) strong computer skills. Must be able to work extended hours and travel as required

      Must demonstrate expertise of building and site design, construction, operation and maintenance as well detailed and extensive knowledge of design and construction methods and processes related to cooling water system piping fabrication and installation.
      Must have knowledge of codes, standards and regulations as they apply to design, construction, operations and maintenance of buildings and building sites.
      Must be able to organize, schedule, conduct, and coordinate workloads and staff to meet established milestones.
      Must be customer focused and possess: (1) the ability to identify issues, analyze and interpret data; (2) good analytical, verbal and written communication skills to accurately document, report, and present findings to a variety of audiences including management and external parties; (3) strong interpersonal skills to influence and guide all levels of employees; (4) the ability to maintain the confidentiality of sensitive information; (5) the ability to represent the company on external projects; and (6) strong computer skills.
      Must be able to work extended hours and travel as required.


      EDUCATION:
      Bachelor's degree in architecture, engineering, facilities management or a related discipline and nine or more years of progressive professional experience in construction or facilities management with at least three of those years in a management role.

      SHIFT:
      5/40
       
      Job Number: 193158
      Job Location: San Diego, CA
      Rate: $DOE
      Duration: 7 months
      Input Date: 08/05/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Patrick Costello
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: pcostello@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Creo Product Definition & Verification (Checking) Designer III/IV

      Description:
      Inconen is looking for a Creo Product Definition & Verification (Checking) Designer III/IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

      ** Candidates must be U.S. Citizens without Dual Citizenship **
      ** Secret clearance is preferred but not required **
      ** 10 years as a drawing and model checker for Aerospace mechanical hardware**
      ** Strong proficiency using GD&T per ASME Y14.5 **
      ** 5-10 years Creo and Windchill PLM System **

      Duties:
      -Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.

      Typical responsibilities include:
      -Prepare product definition (CAD models and drawings).
      -Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

      40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
      30% - Performs design calculations to validate any phase of design requirements.
      20% - Estimation of resources and schedule required to complete a design activity and training to staff.
      10% - Provide technical guidance to less senior CAD designers and to design support personnel.

      Skills:
      -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
      -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
      -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
      -ASME Certification in GD&T is a plus.
      -Ability to read and interpret product definition and related specifications.
      -Electronic markup tools and the ability to work paperless is required.

      Education:
      -Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
       
      Job Number: 16885
      Job Location: Canoga Park, CA
      Rate: $50.00 - $60.00/HR
      Per Diem: Split Possible
      Overtime: Possible
      Duration: 6 Mos
      Start Date: ASAP
      Input Date: 09/12/2021
      Last Updated: 10/18/2021
      Firm Name: INCONEN CORPORATION
      Attention: Patrick O'Neil
      Address: 6133 BRISTOL PKWY STE 232
      City, State: CULVER CITY, CA 90230
      Phone: 310/410-1931
      Fax Phone: 310/410-1751
      Website: www.inconen.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Customer Service Electronic Repair Technician

      Description:
      A Customer Service Electronic Repair Technician job is available with a manufacturing client in Salt Lake City, Utah. In this position you will work on a specialized team that aims to provide world class repair services for our customers. You will perform activities associated with the configuration, testing, troubleshooting, and repair of electronic/electro-mechanical parts sent in from customers for repair, as well as new parts going into new equipment manufactured at our SLC manufacturing facility. You will also perform routine maintenance, calibration, and repair of test fixtures to ensure ISO standards are maintained. In this position you will work in a climate-controlled environment and no travel is required.

      Job Responsibilities;

      * Read engineering drawings and schematics to ensure product is constructed to specifications.
      * Component level troubleshooting of electronic PC boards using engineering schematics and typical tools (DVM, O-Scope, Power Supply, Waveform Generators, etc.)
      * Component level rework/repair of PC boards containing thru-hole and surface mount components.
      * Determine if PC boards and electronic sub-assemblies are tested completely.
      * Make technical evaluations with warranty returns and suggest pertinent changes to existing fixtures or programs to ensure quality testing of PC boards and electronic sub-assemblies.
      * Repairs and/or modifies electronic sub-assemblies as per engineering change orders.
      * Participates in ISO continuous improvement and safety programs to ensure adaptation to customer's needs.
      * Participates in Job Safety Analysis/Behavior Based Observations to identify and reduce potential health and safety risks.

      Job Requirements:

      * Associates degree in electronic engineering technologies or equivalent, with a minimum of 2 years practical experience to include troubleshooting digital and analog electronics.
      * Understanding of AC/DC electrical theory and how to apply it.
      * Must have ability to operate typical electronic lab instruments (DVM, O-Scope, Power Supply, Waveform Generators, etc.).
      * Applied knowledge of ESD prevention programs.
      * Must be proficient using Microsoft Windows® operating system and basic understanding of computers.
      * Ability to program in high level languages: C, C++, Pascal, etc., and to understand and use computer functions with respect to product testing, is a plus.

      THIS IS A 1ST SHIFT CONTRACT TO HIRE POSITION

      If you are interested in this Customer Service Electronic Repair Technician job in Salt Lake City, Utah, please apply via the 'apply now' link provided.

      Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

       
      Job Number: 315842
      Job Location: Salt Lake City, UT
      Rate: --
      Per Diem: --
      Overtime: --
      Duration: JOB-CONTRACT_TYPE
      Start Date: --
      Input Date: 09/03/2021
      Last Updated: 11/11/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: EdwardPaquet
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      Depot Service Technician

      Description:
      PDS Tech, Inc. is seeking a Depot Service Technician in Tewksbury, MA.

      Summary:
      The candidate will work in a depot service area along with team members to diagnose, repair. assemble, and calibrate the client's customer field instruments. The instruments are based on X-Ray and Optical technologies which are used in a wide variety of industries to detect the elemental composition for a variety of materials. The candidate will be trained to work with specific instruments, data acquisition systems, and standard industry software. A basic level and prior experience in troubleshooting and repairing electro-mechanical instruments is highly preferred

      Major responsibilities:



      • Troubleshoot and repair of high volumes of customers portable instruments
      • Use of fixtures, tools, and software during repair and calibration process
      • Ensure pace, volume, and weekly/monthly productivity goals are met
      • Coordinate with warehouse members to ensure parts and delays are minimized
      • Recording of work performed in various systems including Salesforce


      Related experience preferred:
      • Intermediate understanding of electronic test/repair/troubleshooting concepts
      • Prior experience using test equipment (Meters, torque tools, custom hardware and software)
      • Prior use of Salesforce or similar service tracking software is desirable
      • Must have experience working in an ESD environment


      Qualifications:

      • High School Diploma or equivalent - OR - certified in a technical discipline preferred
      • Minimum 1-year experience in high volume repair of portable electro-mechanical products greatly preferred
      • Good communications, excellent computer skills required (e-mail, MS Office, Salesforce)
      • Motivated to work on a team and build working relationships with co-workers
      • Ability to sit or stand for extended periods of time; bend, stoop, reach, turn as required
      • A healthy sense of urgency and motivation to learn more through cross-training
      • Strong English skills desired

       
      Job Number: 2110138305
      Job Location: Tewksbury, MA
      Duration: 12 months
      Input Date: 09/01/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tim Burkart
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j2alQAA&URLSource=cjhunter

      Design and Analysis Engineer 2

      Description:
      Chipton-Ross is seeking 5 Design and Analysis Engineer 2's for an opening in Everett, WA. .

      RESPONSIBILITIES:
      Develops and documents moderately complex electronic and electrical system requirements. Designs hardware, software and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Assists in monitoring supplier performance to ensure system integration and compliance with requirements. Solves problems concerning fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

      REQUIRED EXPERIENCE:
      Good Lab Testing,
      Knowledge of Client Processes and Tools/EEE,
      Compuer Engineering
      Design concepts and techniques,
      Electronics system design,
      EMI/EMC,
      Safety Awareness,
      systems thinking

      Previous Client experience is a plus but not required.

      EDUCATION:
      Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, com

      TRAVEL: Yes
      Domestic travel: no more than 15%

      FULL TIME/VARIABLE SHIFT
      WORK HOURS: 7:30 AM - 4:00 PM
      Start time is flexible, between 6:30 AM and 8:30 AM.

      MISCELLANEOUS:
      Candidates must be local to the Puget-Sound area.

      Placement in Renton, Seattle, Everett, WA will be dependent on candidates experience.

      Combination of Virtual and Onsite
       
      Job Number: 193832
      Job Location: Everett, WA
      Rate: $DOE
      Duration: 12 Months
      Input Date: 08/24/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Design and Analysis Engineer 3

      Description:
      Chipton-Ross is seeking 8 Design and Analysis Engineer 3's for an opening in Everett, WA

      RESPONSIBILITIES:
      Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

      REQUIRED SKILLS/QUALIFICATIONS:
      GOOD LAB TESTING,
      KNOWKEDGE OF CLIENT PROCESSES AND TOOLS/EEE,
      COMPUTER ENGINEERING,
      Design concepts and techniques,
      Electronics system design,
      EMI/EMC,
      Safety Awareness,
      systems thinking

      DESIRED SKILLS/QUALIFICATIONS:
      Previous client experience is a plus but not required.

      EDUCATION:
      Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

      TRAVEL: YES
      Domestic travel: no more than 15%

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:30 AM - 4:00 PM

      MISCELLANEOUS:
      Candidates must be local to the Puget-Sound area. Placement in Renton, Seattle, Everett, WA will be dependent on candidates experience.
       
      Job Number: 193731
      Job Location: Everett, WA
      Rate: $DOE
      Duration: 12 Months
      Input Date: 08/19/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      EE Technical Designer 3 - Mechanical/Electronic/Electrical Design

      Description:
      Description

      Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

      2-3 years of experience in electrical or mechanical engineering
      Assembly experience preferred
      Experience with supplier relations
      Bachelor’s degree preferred, but not required

      6 months with the possibility for extension or to become permanent employee. Candidate will need to be local or willing to relocate as this is an on-site role. 
       
      Job Number: 46836-1
      Job Location: Berkeley, MO
      Rate: DOE
      Per Diem: Yes
      Overtime: Yes
      Duration: 6-12 months+
      Start Date: ASAP
      Input Date: 11/08/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Garrett Smart
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: garrett.smart@thestructurescompany.com
      Website: www.thestructurescompany.com

      Elect Design and Analy Engr 4

      Description:
      Chipton-Ross is seeking 2 Electrical Design and Analysis Engr 4's for an opportunity in Tukwila, WA.

      RESPONSIBILITIES:
      Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

      We are seeking experienced integrated circuit (IC) layout engineers to implement custom analog/mixed-signal circuits in state-of-the-art CMOS (=22nm) and SiGe semiconductor fabrication processes. The qualified candidate will have experience performing custom IC layout to achieve tight matching, high speed, low noise, and low power consumption. Circuits for custom layout may include analog or digital standard cells, resistors and capacitors, IO cells, ESD structures, and SRAM leaf cells.
      Tasks/responsibilities include:
      Working closely with IC / chip design team on block-level and chip-level floor-planning
      Performing cell-level layout, block-level layout, and chip assembly
      Performing physical verification including design rule checks (DRC), layout vs. schematic (LVS) checks, and electrical rule checks (ERC)
      Perform / support parasitic extraction (PEX) and analysis
      Drive continued improvement of layout practices and procedures

      REQUIRED EXPERIENCE:
      6+ years of experience in full-custom analog/mixed-signal IC layout
      Thorough understanding of industry-standard electronic design automation (EDA) tools for IC layout and physical verification e.g. those from Cadence, Mentor Graphics, and Synopsys
      Experience with standard cell development and/or familiarity with structured, pitched, or arrayed layout
      Knowledge of performance analog and high-power layout techniques
      Experience exercising and debugging the IC verification flow (DRC, LVS, XOR, PEX, etc.)
      Demonstrated successful IC designs implemented in advanced commercial semiconductor fabrication process technologies e.g.. <22nm FinFET), silicon-on-insulator (SOI), and/or silicon germanium (SiGe) processes. Experience with layout techniques for managing IR drop, RC delay, electromigration, self heating and coupling capacitance Preferred Qualifications: Experience with Radiation-Hardened By Design (RHBD) layout techniques Experience with scripting to automate IC layout (e.g. SKILL, Perl, Python) Experience with experimental process technologies (e.g. Gate-all-around FETs (GAAFETs)) EDUCATION: Accredited Bachelor, Master or Doctorate degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. TRAVEL: YES Possible domestic trave WORK HOURS: 7:00AM-3:30PM Full-Time/First Shift ADDITIONAL INFORMATION: Can be virtual but possible travel to onsite location as needed.
       
      Job Number: 192194
      Job Location: Tukwila, WA
      Rate: $DOE
      Duration: 6 Months
      Input Date: 09/17/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Dan Mulvihill
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: dmulvihill@chiptonross.com
      Website: www.chiptonross.com

      Electrical Assembler

      Description:
      Assembles, finishes, solders, cleans, reviews and reworks various parts in the assembly of electronic components, molded components, metal components and other similar products.

      Operates equipment and assembly machines and assembles various components through the use of pre-set up tools, fixtures and machines and performs any required preparation tasks requisite to fabrication.  Reviews and reworks similar components and assemblies.  Cleans and touches up finished products through the use of pre-determined solvents, etc., as well as removing excess flashing, blemishes, etc.  Uses basic hand tools, special fasteners, measuring devices and special parts preparation equipment.  Operates equipment and assembly machines.  At times will perform work while using a scope.  May be required to measure and record product data.  Will be responsible for the quality of work and meeting daily quantity standards coming from each assigned workstation.

      Follows all ISO 9001 and AS 9100 work instructions and general department procedures.  Keep facilities, materials, and work area clean and organized, exercising care in their use.  Uses safety practices and takes prompt action to correct problems.  Assists co-workers when necessary to meet work unit goals.  Actively seeks continuous process improvement.  May be required to train other employees and assist in orientation of new employees. Performs other duties as required and may be utilized in other areas and departments of manufacturing as workload may dictate.
      High School education or equivalent and a minimum of 6 months similar manufacturing experience including experience reading blueprints and working with scopes.   Must have good manual dexterity and keen visual acuity.  Follows written and oral instructions. Employees working on backpanel assemblies will be required to pass IPC-A-610 Certification.  This person needs to be able to work well with others and is a team player, results orientated and has good communication skills.  This job will involve repetitive motion.   Job duties require working with and around chemicals.  Work is performed primarily in a sitting position but may require standing, reaching, twisting and stooping positions.  Scheduled overtime may be required.  Visual exams are required pre-hire and bi-annual to confirm visual acuity of 20/20 with or without glasses along with passing a standard color vision exam. Client is a US ITAR facility – Applicants must be US citizens or permanent legal residents.
       

       
      Job Number: 2110139366
      Job Location: Osseo, MN
      Duration: 3 months
      Input Date: 09/13/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Tim Burkart
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6hGQAQ&URLSource=cjhunter

      Electrical Design & Analysis Engineer

      Description:
      MUST BE US PERSONS - REMOTE WORK IS AN OPTION
      DESIRED EXPERIENCE:
      • VHDL,
      • Xilinx FPGA’s
      • System Verilog
      • UVM
      • FPGA On Target Testing (OTT)
      • DO-254
      • MIL-STD-882E
      • MIL-HDBK-516C
      • Bachelor’s Degree with 5+ years of experience

      INTERVIEW PROCESS:

      The manager is looking to schedule interviews as soon as possible. These will be phone interviews with the Chief Firmware Engineer and the Engineer Manager where they will primarily discuss the candidates experience with VHDL, developing DO-254 processes and experience with On Target Testing.

      JOB DESCRIPTION
      Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

      Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.

      This will be a 12 month assignment on a team of 30 where they will be developing requirements, code, and test procedures for safety critical avionics. This opening is open to virtual candidates, as the person selected for this role will not be required to sit on-site.

      TSC LLC is an AA/EOE
       
      Job Location: Hazelwood OR Remote, MO
      Rate: $60-73/hr
      Per Diem: Possible
      Overtime: Possible
      Duration: 12 Months+
      Start Date: ASAP
      Input Date: 06/21/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Chris Sheets
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: ChrisSheets@thestructurescompany.com
      Website: www.thestructurescompany.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electrical Design Analysis Engineer // Multiple Locations- WA, CA, MO

      Description:
      Design and Analysis Engineer 4

      Location: Everett, WA/ Renton, WA/ Seattle, WA
      Duration: 12 Months

      Description:
      Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

      Education / Experience:
      Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

      Skills:
      Good lab testing,
      Knowledge of client processes and tools
      EEE,
      Computer engineering,
      Design concepts and techniques,
      Electronics system design,
      EMI/EMC,
      Safety Awareness,
      systems thinking

      Previous client experience is a plus but not required.

      Skill Code: 664-Electronic Sys Design & Analy
       
      Job Location: Everett, WA
      Rate: Open
      Per Diem: Split
      Overtime: Yes
      Duration: 12 months
      Start Date: ASAP
      Input Date: 08/30/2021
      Last Updated: 10/21/2021
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Website: iconma.com

      Electrical Design and Analysis Engineer

      Description:
      PDS Tech is seeking an Electrical Design and Analysis Engineer for an open position in Manassas VA

      The ideal candidate will:
      • Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
      • Develop high-level and detailed designs consistent with requirements and specifications.
      • Validate designs through various methods of review, testing and analysis.
      • Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
      • Support Supplier Management with make/buy recommendations and other technical services of limited scope.
      • Provide engineering support throughout the lifecycle of the product.
      • Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
      • Work under general direction.

      Minimum Requirements:

      Candidates must meet the following requirements:

      • BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
      • Ability to translate requirements to design
      • Experience with high level architectural design and component selection
      • Proven experience performing an electronic detailed design, including schematic capture
      • Proficient using EDA tools
      • Experience with test planning and execution
      • Experience with test procedure development and documentation
      • Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
      • Strong analytical skills and ability to debug complex systems
      • Process oriented and familiarity with problem tracking systems
      • Ability to communicate effectively
      • Ability to work independently and deliver on schedule commitments
      • Candidates must be willing to work on-site at the Manassas, VA facility as needed


      Desired Requirements:

      Candidates will perform all work on-site at the Manassas, VA facility



      Candidates will have experience in some of the following areas:


      • Aircraft avionics
      • Experience with Mentor Graphics Capital tool
      • Block diagramming with Microsoft Visio
      • Experience supporting the manufacturing process from requirements through build and test
      • Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
      • Familiarity with high voltage power systems for electric aircraft propulsion
      • Experience with environmental qualification and stress testing of hardware
      • Familiarity with high speed digital electronics, including serial data hardware interfaces
      • DO-160, DO-178 or DO-254
      • ARP4761, ARP4754
      • MIL-HDBK-516
      • MIL-STD-810, MIL-STD-461, MIL-STD-704

       
      Job Number: 2110141020
      Job Location: Manassas, VA
      Duration: 6 months
      Input Date: 10/05/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jChQQAU&URLSource=cjhunter

      Electrical Design and Analysis Engineer

      Description:
      PDS Tech is seeking an Electrical Design and Analysis Engineer for an open position in Manassas VA

      The ideal candidate will:
      • Resolve complex issues on critical programs related to architectural approaches, requirements, specifications and design.
      • Lead technical aspect of proposal preparation.
      • Identify critical performance measures and develops processes for computing them.
      • Lead activities in support of Supplier Management with make/buy recommendations and other technical services.
      • Coordinate engineering support throughout the lifecycle of the product.
      • Develop new concepts for future product designs to meet projected requirements.
      • Recommend and manage technology insertion.
      • Work under consultative direction.

      Candidates must meet the following requirements:
      • BSEE or equivalent technical degree with 6 years of relevant experience or MS with 4 years of experience, or PhD with 2 years of relevant experience
      • Ability to translate requirements to design
      • Experience with high level architectural design and component selection
      • Proven experience performing an electronic detailed design, including schematic capture
      • Proficient using EDA tools
      • Experience with test planning and execution
      • Experience with test procedure development and documentation
      • Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
      • Strong analytical skills and ability to debug complex systems
      • Process oriented and familiarity with problem tracking systems
      • Ability to communicate effectively
      • Ability to work independently and deliver on schedule commitments
      • Candidates must be willing to work on-site at the Manassas, VA facility as needed


      Desired Requirements:

      • Candidates will perform all work on-site at the Manassas, VA facility


      Candidates will have experience in some of the following areas:

      • Aircraft avionics
      • Experience with Mentor Graphics Capital tool
      • Block diagramming with Microsoft Visio
      • Experience supporting the manufacturing process from requirements through build and test
      • Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
      • Familiarity with high voltage power systems for electric aircraft propulsion
      • Experience with environmental qualification and stress testing of hardware


       
       
      Job Number: 2110141022
      Job Location: Manassas, VA
      Duration: 6 months
      Input Date: 10/13/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jChfQAE&URLSource=cjhunter

      Electrical Engineer

      Description:
      PDS Tech is seeking an Electrical Engineer for an open position in Florence SC

      The ideal candidate will:
      • Be responsible for supporting electrical system design and integration activities in the Company's Engineering department.
      • Be responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
      • Utilize knowledge of power components, distribution and protection, and controls theory and application.
      • Provide product support for a variety of electronic elevator components and electrical systems.




       
      Must possess at least a Bachelor's or its equivalent in Electrical Engineering and at least five (5) years of work experience in an Electrical Engineering field.  In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three (3) years of work experience in an Electrical Engineering field would be acceptable.

      Must also possess the following:
      • Working knowledge of power distribution, protection and control systems;
      • Experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application;
      • Electrical engineering background with wiring diagrams, system analysis, motor and control applications;
      • Experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3;
      • Experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and
      • Experience with test and measurement equipment.


      Any suitable combination of education/training and/or experience would be acceptable.

       
       
      Job Number: 2110138652
      Job Location: Florence, SC
      Duration: 12 months
      Input Date: 10/08/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sherrita Davis
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j4WrQAI&URLSource=cjhunter

      Electrical Engineer (Elevator Industry)

      Description:
      PDS Tech is seeking an Electrical Engineer for an open position in Florence SC

      This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

      The candidate should be able to:

      • Read and understand schematics, wiring diagrams, mechanical assembly drawings, building layouts in order to analyze complex problems and identify root cause issues and develop innovative solutions.
      • Have the ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel.


       
      Education
      Bachelor's Degree in electrical engineering with at least 3 years’ experience required.

      Relevant industry experience strongly preferred.
      MA/MS degree with 2 to 3+ years’ experience
      BA/BS degree with 3 to 10+ years’ experience



      Experience/Qualifications
      Elevator Industry field experience will be given consideration

      Preferred Skills

      • Sound electrical engineering background (wiring diagrams, systems analysis, motor and control applications, and control logic, electrical circuits, solid state power supplies, communication protocols, harnesses, power electronic components, motors, starters, relays and contactors, drives, transformers,)
      • Elevator systems knowledge
      • Experience working with national, local code and enforcement agencies. i.e. CSA, ASME, NFPA, TSSA, NEC
      • Experience working with suppliers/3rd parties
      • Experience with test and measurement equipment such a power quality meters, oscilloscopes, multimeters
      • General understanding of mechanical and software functions
      • Strong communications skills and leadership ability
      • MS Office applications (Word, Excel, Power Point, etc.)
      • ECAD tools (Cadence or E3 or Autocad Electrical)

       
      Job Number: 2110138656
      Job Location: Florence, SC
      Duration: 12 months
      Input Date: 08/27/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sherrita Davis
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j4XBQAY&URLSource=cjhunter

      Electrical Engineer III

      Description:
      We are currently seeking exceptional candidates who wish to be a part of the commercial space revolution. The position we are seeking is for an Electrical Engineer III.

      Our fun, fast-paced and collaborative team designs, builds, and flies a state of the art Cargo System, an ambitious flagship program to create our Nation's only commercially reusable space plane. With your help, we will conduct many safe and successful missions over the next decade to deliver critical cargo to and from the International Space Station. These flights for NASA will enable us to build an unprecedented commercial space transportation network, which provides affordable, cutting-edge orbital capability and return to Earth services onto runways around the globe. The future of space transportation is now.
      The Electrical Engineer III will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other AS&C groups in order to successfully verify the Electrical System and its interfaces with other systems.

      Must-haves:
      *Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 6 or more years of relevant experience
      *Electrical Power System hardware/software test experience
      *Excellent communication skills required
      *Excellent written skills required
      *Excellent attention to detail
      *Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation
      *Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.)
      *Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management
      *The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge

      Preferred:
      *Experience with data acquisition, sensors and recording systems
      *Experience working with integrated product teams
      *Experience with modeling electronic circuit (Spice)
      *Experience with requirements management and verification
      *Experience working with DOORS or other verification tool
      *Background in the Aerospace and Defense Industry.
      *Experience working with NASA; human spaceflight program experience is a bonus
      *Exposure to simulations through functional and logical models and system analysis
      *Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
      *Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
      *Experience in digital or analog circuit design and schematic capture
      *Ability to work in a highly collaborative, fast paced environment with emphasizes in rapid prototyping and fielding of capabilities
      *Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams

      IMPORTANT NOTICE:
      To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
       
      Job Location: Denver, CO
      Rate: $49/HR-$53/HR
      Per Diem: Possible
      Overtime: Possible
      Duration: Long Term Contract
      Start Date: ASAP
      Input Date: 10/06/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Corey Halliday
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: corey.halliday@thestructurescompany.com
      Website: www.thestructurescompany.com

      Electrical Engineer III

      Description:
      An Electrical Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other groups in order to verify the Electrical System and its interfaces with other systems. To be considered for this role, you will have a Bachelor of Science Degree in Electrical Engineering or other related discipline and a minimum of 6 or more years of relevant experience.

      Electrical Engineer III Job duties:

      * Electrical Power System hardware/software test experience.
      * Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation.
      * Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.).
      * Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management.
      * The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge.

      Qualifications:

      * Experience with data acquisition, sensors and recording systems.
      * Experience with modeling electronic circuit (Spice).
      * Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
      * Background in the Aerospace and Defense Industry. Experience working with NASA; human spaceflight program experience is a bonus.

      If you are interested in this Electrical Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

       
      Job Number: 316964
      Job Location: Louisville, CO
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 10/07/2021
      Last Updated: 11/29/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: FrancisOsolnick
      City, State: West Region
      Email: fosolnick@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=316964&job_number=316964

      Electrical Engineering Technician

      Description:
      PDS Tech is seeking an Electrical Engineering Technician for an open position in East Syracuse NY

      The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

      This is more of a technician role than an engineer role.  The work will include failure analysis and report of root cause including reporting of trends.

      The candidate must have the:
      • Ability to use electronic troubleshooting and debugging tools such as oscilloscopes, DMM, logic analyzers, soldering irons,
      • Ability to use basics of Outlook, Excel and Word to create and publish reports of findings.
      • Typically 4 - 8 years of relevant experience


       
      Education:  
      • Associates Degree

       
      Job Number: 2110137634
      Job Location: East Syracuse, NY
      Duration: 24 months
      Input Date: 08/10/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sherrita Davis
      Address: 50 FOUNDERS PLAZA STE 304
      City, State: EAST HARTFORD, CT 06108
      Phone: 860/289-2643
      800 Phone: 866/636-4723
      Fax Phone: 800/556-5284
      Email: northeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j0MZQAY&URLSource=cjhunter

      Electrical Maintenance Technician

      Description:
      Job Description
      • Installs and repairs electrical systems, apparatuses, and electrical and electronic components of industrial machinery and equipment, following electrical code, manuals, schematic diagrams, blueprints, PLC Ladder diagram and other specifications, using hand tools, power tools, and electrical and electronic test equipment
      • Installs power supply wiring and conduit for newly installed machines and equipment, such as robots, conveyors, and programmable controllers, following electrical code and blueprints, using hand tools and voltage tester.
      • Connects low voltage control cables and wires between machines and equipment, following manuals, schematic diagrams, PLC ladder diagram and blueprints, using hand tools and test equipment.
      • Diagnoses malfunctioning apparatuses, such as transformers, motors, and lighting fixtures, using test equipment, and replaces damaged or broken wires and cables, using hand tools.
      • Replaces faulty electrical components of machines, such as relays, switches, and motors, and positions sensing devices, using hand tools.
      • Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards.
      • May diagnose and replace faulty mechanical, hydraulic, and pneumatic components of machines and equipment.
      • Trace plant wiring and draw it in a proper format to have drafting make an electronic copy for plant records.
      • Install pneumatic, electronic, and instrumentation equipment.
      • Perform electrical installations, repairs, and service equipment per NEC codes.
      • Tests malfunctioning machinery, using test equipment, and discusses malfunction with other maintenance workers, such as MACHINE REPAIRER, MAINTENANCE and TOOL MAKER to diagnose malfunction.
      • Assist with planning layouts, running conduit, wiring and tubing for new and existing installations and developing and carrying out preventative maintenance programs.
      • Work in a Computerized Maintenance Management System for work order tracking, time entry, parts procurement (SAP)

      Minimum Qualifications

      • Associates or Technical Degree with 10+ years’ experience with instrument & controls and electrical distribution (troubleshooting and maintaining) in automotive industry (Casting Facility is a Plus).
      • Solid knowledge of control systems, valves, motors, and instrumentation/ concepts of flow, level, pressure, and temperature.
      • Support compliance efforts of ISO, OSHA, National Electric Code (NEC) and IEC 61131-3 Standards.
      • Able to work various shifts, irregular hours and emergency call-ins as needed


       
      Job Number: 2110137093
      Job Location: Ridgeville, SC
      Duration: 6 months
      Input Date: 08/04/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Leah Swan
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iyixQAA&URLSource=cjhunter

      Electrical Systems Design Engineer

      Description:
      JOB DESCRIPTION
      Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product life cycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
       
      Job Number: 46427-1
      Job Location: El Segundo, CA
      Rate: $71/hourly
      Per Diem: Split
      Overtime: Possible
      Duration: 6 mos
      Start Date: Now
      Input Date: 08/24/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Jorge Garcia
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: jorge.garcia@thestructurescompany.com
      Website: www.thestructurescompany.com

      Electrical Test Technician

      Description:
      JOB SUMMARY
      Performs a variety of standard and specialized tasks required by manufacturing in the test or manufacture of electronic components.  Uses a variety of standard and special test equipment.

      REPORTS TO:   Manufacturing Engineering Supervisor

      JOB DUTIES
      Performs duties such as building test fixtures, computer test set-up, programming, editing, trouble shooting, and repair of components under test.  Sets up and operates test equipment and conducts standard and non-standard tests on a variety of components and units.  Tests or assists in testing complete assemblies.  Observes, records and interprets test results to ascertain trends, functional, production and quality standards.  Trains other employees in test operations.

      Performs modification or replacement of components to meet specifications on functional requirements.  Performs maintenance on standard and non-standard test equipment and apparatus.

      Set up and operate wire wrap machines and perform hand wire wrap operation.  Train other employees in wire wrap operation. Ensures correct supplies and quantities are on hand. 

      Executes to production schedules to meet customers’ requirements. Monitors standards for labor
      identified on routers. Meets all quality requirements.
       
      Follows all ISO 9001 and AS 9100 work instructions and general department procedures.  Keeps facilities, materials, and work area clean and organized, exercising care in their use.  Uses safety practices and takes prompt action to correct problems. Actively seeks continuous process improvement.  May be required to train other employees and assist in orientation of new employees.  Performs other duties as required and may be utilized in other areas and departments of manufacturing as workload may dictate.

      Client is ISO 9001:2015 ISO 13485:2016, AS 9100: rev. D registered, Nadcap Accredited, NASA-STD-8739 and all job duties are to be performed to support the business in meeting all requirements and documented instructions.

      JOB SPECIFICATIONS
      High School education plus a 2 year Electronic Technical degree, plus a minimum of four years related experience.  Soldering experience highly desirable.  Will be required to pass IPC-A-610, J-STD-001, and IPC-620 certifications.  Visual exams are required pre-hire and biennial to confirm visual acuity of 20/20 with or without glasses along with passing a standard color vision exam.  Follows oral and written instructions, must be able to read blueprints and wiring diagrams. Work is performed in standing and sitting positions.  Must be able to lift and carry parts and fixtures of up to fifty pounds.  Job duties may require working with and around chemicals.  Scheduled overtime may be required.  Client is a US ITAR facility – Applicants must be US citizens or permanent legal residents.
       
       

       
      Job Number: 2110139379
      Job Location: Osseo, MN
      Duration: 3 months
      Input Date: 09/17/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jack Beard
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6inQAA&URLSource=cjhunter

      Electrical/Mechanical Assembly Specialist

      Description:
      Job Description:

      Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.

      ---------------------------

      Position Responsibilities:

      %u2022 Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
      %u2022 Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
      %u2022 Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
      %u2022 Coordinates with supervisor to establish work priorities.
      %u2022 Works under minimal supervision.

      Required:
      %u2022 Must have 5+ yrs experience soldering components on PC board assemblies


      Basic Qualifications (Required Skills/Experience):
      %u2022 Minimum of High School Diploma or GED.
      %u2022 More than 5 years of experience in electronics and electro-mechanical assemblies.
      %u2022 More than 5 years of experience in a manufacturing or assembly environment.
      %u2022 More than 5 years of experience performing soldering and electronics repair to the component level.
      %u2022 More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.


      Preferred Qualifications (Desired Skills/Experience):
      %u2022 Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.


      Typical Education/Experience:

      %u2022 Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)

      Relocation:

      %u2022 Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

      Drug Free Workplace: our client is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

      --------------------------
      Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification.
       
      Job Number: JPC - 1757
      Job Location: Germantown, MD
      Rate: $34.00/hr
      Per Diem: Split
      Overtime: Yes
      Duration: 6 months
      Start Date: ASAP
      Input Date: 09/02/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Jorge Garcia
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: jorge.garcia@thestructurescompany.com
      Website: www.thestructurescompany.com

      Electro-Mechanical Assembler

      Description:
      Detailed Description:

      Receives no instructions on routine work, general instructions on new assignments. Tasks are moderately complex in nature where judgment is required in resolving problems and making recommendations. Decisions/actions may cause a minor impact on the work unit operations or schedules. Works under general Supervision. Situations not covered by standard processes, procedures and methods are referred to expert resources. May demonstrate work methods to new employees. Deals directly with immediate supervisor, co-workers and team members; engages in exchanges of factual information and provides some explanation; interactions with external contacts, if applicable, require exchanging factual information and providing some explanation.

      Performs tasks such as, but not limited to, the following:
       
      • Performs hand soldering; manual assembly; setup, operation, and basic maintenance of custom and standard semiautomatic and/or automated assembly equipment and tools; operation of automated and operation of functional test units.
      • Moves from one operation and/or product to another as schedule dictates.
      • Inspects products using visual, automated, electronic and mechanical inspection procedures. Uses automated and non-automated diagnostic programs to perform electronic product testing and functional testing.
      • Troubleshoots, highlights and communicates issues relating to routine and/or basic defects. Packaging and crating for international shipment of all high level technical equipment.
      • Training other employees as needed




      Knowledge/Skills/Competencies:
       
      • Has foundation skills, is competent in a range of skills associated with their primary work area and possesses and actively uses coaching and some additional key skills outside of their primary work area.
      • Must be able to read blueprints/schematics and drawings and assembly products with multi levels
      • Must possess specific certifications as defined by site operations.
      • General knowledge of product process flow.
      • Knowledge of product quality and soldering specifications and quality improvement processes.
      • Knowledge of manufacturing information systems.
      • Ability to recognize problems in the operation process or with components and to highlight/communicate those problems to Team Leader.
      • Ability to learn established quality and quantity requirements.
      • Ability to manually assemble components and produce high quality products in defined time periods.
      • Knowledge of electrical, electromechanical and pneumatic systems and principals of operation.
      • Ability to analyze equipment and systems, make appropriate adjustments within area of defined job scope or highlight highlight/communicate problems to Team Leader.
      • Knowledge of personal computers and ability to learn and use applications specific to this area
      • Ability to maintain detailed, accurate and organized records.
      • Ability to effectively communicate with a variety of internal customers.
      • Basic manufacturing system knowledge.
      • Must be a team player and able to work in other areas as required by the supervisor.

        Physical Demands:

       

      • Duties of this position are performed in a manufacturing environment with occasional to frequent exposure to elements such as noise, dust, chemicals, operating machinery, temperature extremes, etc.
      • Duties of the position require periodic light physical effort and exertion including prolonged repetitive motions requiring manual dexterity and precise hand/eye coordination, sitting and or standing in confined workspaces, using tools and equipment, and moving and handling materials.
      • Duties may require periodic heavy manual effort including lifting objects and standing for up to 8 to ten hours a day.
      • Duties require extended periods of sustained visual concentration on detailed documentation and product assemblies.
      • Work will be performed in a cleanroom and semi-cleanroom environment, which requires the use of PPE such as shoe covers, smock, gloves, hair covering.
      • Above demands are carried out within the Company and statutory Health and Safety guidelines
         

      Desired experience:

      • 2 years Vacuum testing, leak checking experience
      • 2 years Contract manufacturing experience

       
      Required Experience:

      • Three to five years’ relevant experience
      • Basic computer skills and experience using ERP manufacturing systems, scanning job travelers


      Typical Education:

      • High school diploma and additional courses after high school, or an equivalent combination of education and experience.


      Desired Education:

      • Minimum of 2 years of college or technical degree
         


       
      Job Number: 2110136265
      Job Location: Fremont, CA
      Duration: 6 months
      Input Date: 09/23/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jack Beard
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iwH1QAI&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electro-Mechanical Technician

      Description:
      A Electro-Mechanical Technician job in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will have an Associates Degree in Electromechanical Technology or related field, with a minimum of 1-2 years' experience in the assembly and testing of complex electro-mechanical assemblies in a production or prototype environment in the aerospace, defense, or engineering fields. Must be a US Citizen - No sponsorship.

      Electro-Mechanical Technician job duties:
      * Perform a wide variety of complex electronic (e.g. wiring, soldering, circuit board installation) and mechanical (e.g. machined parts, gears, sensors, adhesives) assembly tasks in support of production projects by using electro-mechanical tools and devices
      * Develop and maintain work instructions and procedures
      * Work from schematics and specifications to construct developmental assemblies, subassemblies, and components
      * Assemble parts or units, and position, align, and fasten units to assemblies, sub-assemblies, or frames using hand tools and power tools
      * Inspect, test, troubleshoot, and calibrate completed units to ensure they meet specifications, tolerances, and requirements using standard bench tools
      * Measure parts to determine tolerances, using precision measuring instruments such as micrometers and calipers
      * Disassemble faulty units and replace parts.

      Qualifications:
      * Associate's degree in Electromechanical Technology or related field or equivalent experience
      * Minimum one to two years of experience in the assembly and testing of complex electro-mechanical assemblies in a production or prototype environment in the aerospace, defense, or engineering fields
      * Certification in one or more of the following IPC Standards preferred: J-STD-001, A-610, A-620; ▪ ATE (Labview, Python, etc.) experience preferred
      * Prior experience working in an aerospace quality control (AS9100) and manufacturing environment preferred
      * Proficient level of working mechanical and electrical knowledge
      * Must be a US Citizen

      If you are interested in this Electro-Mechanical Technician job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

       
      Job Number: 317129
      Job Location: Austin, TX
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 10/13/2021
      Last Updated: 11/09/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: BarrySparks
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electro-Mechanical Technician

      Description:
      Introduction


      Visium Resources has been asked to identify qualified candidates for this Electro-Mechanical Technician position. This position is a contract-to-hire opportunity which is expected to be on-site in the Atlanta, GA area .


      Summary


      The Electro-Mechanical Technician will be responsible for Assembly, disassembly, quality testing, troubleshooting, and repair of electronic - mechanical equipment in a customer service based environment. Company is searching for an eager hands-on candidate, ideally with both electronic and mechanical troubleshooting and repair capabilities. This position will have occasional interface with clients related to repairs and will also perform some documentation within computer system.


      A primary attraction / primary skills / important qualifications of Electro-Mechanical Technician is that this position is a contract-to-hire opportunity, offering an excellent career position to grow with a national corporation, which is very well-established, well-respected and continually growing. When direct, the position offers full benefits. Position is scheduled to transition to direct within 4 months.



      Essential Job Functions and Duties
      Ability to read, write and speak fluent English.
      Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
      Possess the ability to solder to the component level.
      Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, multi-meters, mega ohm meter etc.)
      Ability to accurately annotate and maintain repair documentation.
      Possess good attendance and work ethic. Be punctual and have a good attendance record.
      Perform assigned tasks in a safe, effective, and efficient manner.
      Have the flexibility to work overtime when required.
      Ability to work independently or as a member of a team.
      Have excellent problem solving and decision making skills.
      Possess basic computer skills.
      Read and understand complex assembly drawings, schematics, and test procedures.
      Test, troubleshoot and repair electronic-mechanical equipment in a fast paced customer service environment.
      Ability to drill/tap and remove screws.
      Familiarity with the use of calipers and other measuring devices to verify part dimensions.
      Possess a general knowledge of the use and operation of basic hand and power tools.
      Experience with building and troubleshooting wiring harnesses.
      Working knowledge of basic clutch and bearing systems.
      Excellent knowledge of a motor and its internal components.

      Required Education and Experience

      Qualifications Include:
      Candidate must have a minimum of an associate's degree or equivalent military experience in an electrical or mechanical field.
      Candidate must have a minimum of 2 years verifiable experience as an Electrical /Mechanical Technician.
      Normal work hours are 7:30 am to 4:00 pm
      Must be flexible to work overtime as required
      Drug and Background screening required post offe
       
      Job Number: 9353
      Job Location: Buford, GA
      Overtime: Poss
      Duration: Contract-Direct
      Start Date: ASAP
      Input Date: 10/11/2021
      Last Updated: 10/14/2021
      Firm Name: VISIUM RESOURCES
      Attention: Michael Forster
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Website: www.myvisium.com

      Electro-physics Engineer/Scientist 4

      Description:
      PDS Tech, Inc. is seeking an Electro-physics Engineer/Scientist in Berkeley, MO.

      Description:

      • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

      Additional Responsibilities Include:

      • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      • Develops architectures to integrate systems and components into higher level systems and platforms
      • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      • Defines and conducts tests to validate performance of designs to requirements
      • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      • Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      • Writes appropriate sections of proposals to support development of new business
      • Provides general mentorship

      Basic Qualifications (Required Skills/Experience):
      • This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
      • Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      • Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)
      • Willing to Travel Domestically and internationally as needed

      Preferred Qualifications (Desired Skills/Experience):

      • B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      • Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      • Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      • Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      • Experience working within an engineering organization
      • Experience with lightning testing and analysis

      Typical Education/Experience:

      • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

       
      Job Number: 2110140455
      Job Location: Saint Louis, MO
      Duration: 12 months
      Input Date: 10/04/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jAn1QAE&URLSource=cjhunter

      Electro-physics Engineer/Scientist 5

      Description:
      PDS Tech, Inc. is seeking an Electro-physics Engineer/Scientist in Berkeley, MO.

      Description:

      • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.

      Additional Responsibilities Include:

      • Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      • Develops architectures to integrate systems and components into higher level systems and platforms
      • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      • Defines and conducts tests to validate performance of designs to requirements
      • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      • Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      • Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      • Writes appropriate sections of proposals to support development of new business
      • Provides general mentorship



       
      Basic Qualifications (Required Skills/Experience):
      • This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
      • Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      • Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)
      • Willing to Travel Domestically and internationally as needed

      Preferred Qualifications (Desired Skills/Experience):

      • B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      • Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      • Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      • Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      • Experience working within an engineering organization
      • Experience with lightning testing and analysis
      • Previous experience with RF systems and antenna simulation, integration, and testing
      • Experience with complex electromagnetic and RF modeling and simulation tools such as Ansys EMIT or Altair FEKO

      Typical Education/Experience:

      • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

       
      Job Number: 2110140458
      Job Location: Saint Louis, MO
      Duration: 12 months
      Input Date: 10/04/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Chad Dunavant
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jAnGQAU&URLSource=cjhunter

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronic Repair Technician

      Description:
      Introduction


      Visium Resources has been asked to identify qualified candidates for this Electronic Repair Technician position. This position is a contract to direct hire opportunity, which is expected to be on-site in Orlando, FL for a duration of 3/4 months to direct hire with client.


      Summary


      The Electronic Repair Technician will be responsible for troubleshooting and repair of equipment, to component level.


      A primary attraction of this Electronic Repair Technician is the opportunity to join a growing organization that values its employees and provides fair compensation and benefits. This position will be contract-to-direct, offering a career opportunity with a great company. The work environment is laboratory quality, indoor facilities with strong teamwork and recognition for work well done.

      Qualified candidates would have the following:


      Ability to perform troubleshooting and repair to component level, using standard tools, such as micrometers, calipers, soldering, scope and other lab equipment.

      Strong electronic theory knowledge required.
      Ability to pass drug and background pre-employment testing
      Hours are M-F, 7am-3pm (flexible possible). with OT possible
       
      Job Number: 9470
      Job Location: Orlando, FL
      Rate: 18.00
      Per Diem: no
      Overtime: Poss
      Duration: 3 mos-direct
      Start Date: ASAP
      Input Date: 10/11/2021
      Last Updated: 10/14/2021
      Firm Name: VISIUM RESOURCES
      Attention: Michael Forster
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Website: www.myvisium.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronic Repair Technician

      Description:
      Introduction


      Visium Resources has been asked to identify qualified candidates for this Electronic Technician position. This position is either a contract or a direct hire opportunity, which must be on-site in Estacada, OR. This position is intended to be a direct hire within 3 months, possibly immediately.





      Summary


      The Electronic Technician will be responsible for Assembly, disassembly, quality testing, troubleshooting, and repair of electronic equipment in a customer service based environment.



      This position is an opportunity to join a quality organization for a long term career opportunity.
      Will accept very junior level candidates that are willing to learn and grow with the organization.


      Normal work hours are 8:00 am to 5:00 pm
      Must be flexible to work overtime as required

      Qualified candidates would have the following:

      Possess excellent written and oral communication skills.
      Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
      Possess the ability to solder to the component level.
      Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, etc.)
      Ability to accurately annotate and maintain repair documentation.
      Possess good attendance and work ethic. Be punctual and have a good attendance record.
      Perform assigned tasks in a safe, effective, and efficient manner.
      Have the flexibility to work overtime when required.
      Ability to work independently or as a member of a team.
      Have excellent problem solving and decision making skills.
      Possess basic computer skills.
      Read and understand complex assembly drawings, schematics, and test procedures.
      Test, troubleshoot and repair electronic equipment in a fast paced customer service environment.
      Ability to drill/tap and remove screws.
      Familiarity with the use of calipers and other measuring devices to verify part dimensions.
      Possess a general knowledge of the use and operation of basic hand and power tools.
      Experience with building and troubleshooting wiring harnesses.
      Working knowledge of basic clutch and bearing systems.
      Familiarity with the basic operation of motors.

      Post Offer Background check and drug screening required
       
      Job Number: 9469
      Job Location: Estacada, ORE
      Overtime: Poss
      Duration: contract-hire
      Start Date: ASAP
      Input Date: 10/11/2021
      Last Updated: 10/14/2021
      Firm Name: VISIUM RESOURCES
      Attention: Michael Forster
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Website: www.myvisium.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronic Technician

      Description:
      Visium Resources has been asked to identify candidates for the following Electronic Technician position, located in Orlando, FL. This contract-to-hire position is an opportunity to join an excellent team, and begin a long term career with a national and continually growing successful organization. Strong electronics experience is needed with an emphasis on the following areas of skill:

      Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
      Possess the ability to solder to the component level.
      Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, etc.)
      Ability to accurately annotate and maintain repair documentation.
      Possess good attendance and work ethic. Be punctual and have a good attendance record.
      Perform assigned tasks in a safe, effective, and efficient manner.
      Have the flexibility to work overtime when required.

      Qualified candidates would have the following:


      Ability to work independently or as a member of a team.
      Have excellent problem solving and decision making skills.
      Possess basic computer skills.
      Read and understand complex assembly drawings, schematics, and test procedures.
      Test, troubleshoot and repair electronic equipment in a fast paced customer service environment.
      Ability to drill/tap and remove screws.
      Familiarity with the use of calipers and other measuring devices to verify part dimensions.
      Possess a general knowledge of the use and operation of basic hand and power tools.
      Experience with building and troubleshooting wiring harnesses.
      Working knowledge of basic clutch and bearing systems.
      Familiarity with the basic operation of motors.
      Possess excellent written and oral communication skills.
      Qualifications Include:
      Candidate must have a minimum of an associate's degree or equivalent military experience in an electrical field.
      Candidate must have a minimum of 2 years verifiable experience as an Electronics Technician.

      Working Conditions / Work Schedule / Travel
      Normal work hours are 8:00 am to 4:30 pm
      Must be flexible to work overtime as required
       
      Job Number: 9430
      Job Location: Orlando, FL
      Rate: 19.50
      Duration: CTH
      Start Date: ASAP
      Input Date: 10/11/2021
      Last Updated: 10/14/2021
      Firm Name: VISIUM RESOURCES
      Attention: Jason Morro
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Website: www.myvisium.com

      Electronic Technicians

      Description:
      URGENT TECHNICIAN NEEDS IN NEW JERSEY

      Visium Resources has immediate opportunities for Electronic and Solder technicians in New Jersey.

      Aerospace and/or Military experience strongly preferred.
      Component level repair and soldering experience to FAA specifications.

      Per Diem and travel offered.
       
      Job Location: New Jersey
      Input Date: 10/06/2021
      Firm Name: VISIUM RESOURCES
      Attention: Mike Forster
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Email: mforster@myvisium.com
      Website: www.myvisium.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronics Repair Technician II

      Description:
      Visium Resources has been asked to identify candidates for the following position, currently located in Piscataway, NJ.

      ****This position is a contract position until mid-March '22 and may have the opportunity to relocate to Orlando, FL after the contract.

      Electronics Repair Technician II is responsible for the intermediate electronic maintenance, test, repairs, services, and
      modifications of electronic equipment in accordance with FAA regulations.
      Essential Functions / Key Areas of Responsibility
      Troubleshoots and repairs electronic equipment to component level in accordance with FAA regulations and company IPM
      (Inspections Procedures Manual)
      Modifies equipment according to service bulletin and/or manufacturer documentation
      Works independently or in collaboration with experienced electronics technicians
      Carries out prescribed procedures according to an established schedule
      Receives training in the use of more specialized test instruments and learn advanced troubleshooting procedures
      Follows specific layout and schematic diagrams to repair and maintain simple or advanced devices or subunits of equipment and
      schematic diagrams such as power supplies, oscillators, amplifiers, etc.
      Review work orders to ensure customer requested activities have been complied with, prior to release of the repair
      Work is reviewed by Technician IV, supervisors, and inspectors
      May work on alternative assignments with detailed written or oral instructions
      Completes quality and production paper work, prepares estimates, and maintains maintenance documentation in accordance with
      current quality assurance requirements
      Communicates with cross-functional departments as required to support repair process
      Participates in Technician cross training programs and may be assigned to other teams for short or long term assignments
      Completes repairs in accordance with company ISO procedures and within company objectives

      Qualified candidates would have the following:

      US Citizens or Green Card Holder required
      Minimum of four (4) years related experience in servicing Aircraft electronics to a component level preferred in the commercial airline and/or aviation product support field or a two (2) year college level degree in an electronics related field. Must have understanding of Federal Aviation Regulations and other governing regulatory requirements
      Able to meticulously document incoming product condition and maintenance activities
      Pass a seven (7) year background check and pre-employment drug test
      Legally eligible to work in the country in which the position is located
      Familiarity with both analog and digital electronics, hardware and software
      Must have experience using a PC (personal computer)
      Ability to read and understand engineering drawings and wiring diagrams
      Ability to understand and speak English in order to read technical literature, follow oral instructions and communicate with cross
      functional team members.
      Required to have an intermediate understanding of electronic theories and techniques and familiarity with standard electronic
      components
      Ability to use basic and advanced test instruments and perform adjustments as necessary
      Willing to think out-of-the-box to solve operational and technical problems
      Manual and Automatic Test Benches, PC, oscilloscope, and multi-meters

      Preferred Qualifications
      Prior military or commercial avionics level 3 component repair experience preferred
      FAA Repair Certificate a plus
      Understanding of Federal Aviation Regulations and other governing regulatory requirements
      Able to meticulously document incoming product condition and maintenance activities
       
      Job Number: 9446
      Job Location: Piscataway, NJ
      Rate: 25.00
      Per Diem: Yes
      Overtime: Possible
      Duration: 6 Mos +
      Start Date: ASAP
      Input Date: 10/11/2021
      Last Updated: 10/14/2021
      Firm Name: VISIUM RESOURCES
      Attention: David Story
      Address: 541 S ORLANDO AVE STE 201
      City, State: MAITLAND, FL 32751
      Phone: 321/397-1016
      Website: www.myvisium.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronics Technician

      Description:
      An Electronics Technician/Wire Harness Assembler job in Peoria, IL is currently available through Belcan. This job is a full-time position with benefits. To be considered for this position, you will need at least an Associate's Degree or equivalent work experience involving assembly of electrical and electronic systems, test stands, and prototype wire harnesses.
       
      Electronics Technician - Wire Harness Assembler Job duties:
      · Assemble electrical and electronic systems and prototype wire harnesses according to engineering data and knowledge of electrical principles.
      · Use of hand tools and measuring instruments to build and repair electrical instruments or testing equipment.
      · Collaborate with electrical engineers and other personnel to identify, define, and solve developmental problems.
      · Record and maintain thorough and accurate records of all pertinent project information.
      · Routine exposure to field conditions or actual manufacturing/development laboratory environments.
      · Work with equipment that requires the utilization of good safety practices.
      · This position also may require occasional travel to customer site.
       
      Qualifications:
      · Must be a US Citizen due to the nature of the work (ITAR Compliant position).
      · Education: Associate Degree or equivalent experience in electronic technology, electrical systems, etc.
      · Knowledge of electronic and electrical theories, education, and concepts.
      · Capable of lifting up to 50 pounds.
      · A valid driver's license is required.
       
      Additional Desired Qualifications:
      · Work experience with electronics, electrical systems and components, wire harnesses, etc.
      · Work experience with hand tools, electronic equipment, electrical testing tools, etc.
      · Ability to work in a team environment and take direction.
      · Ability to work independently and be a self-starter.
      · Ability to work in a fast-paced environment.
       
      If you are interested in this Electronics Technician job in Peoria, IL, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

       
      Job Number: 315539
      Job Location: Peoria, IL
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 08/20/2021
      Last Updated: 10/19/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ColleenMinello
      Address: 7820 REDSKY DR
      City, State: CINCINNATI, OH 45249
      Phone: 513/432-2995
      800 Phone: 800/945-1900
      Website: www.belcan.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Electronics Technician (Control Panels) #10496

      Description:
      ELECTRONICS TECHNICIAN I DUTIES AND RESPONSIBILITIES
      Wire and build electrical control panels, junction boxes and sub assemblies per customer requirement.
      Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material.
      Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments.
      Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers.
      Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc.
      Red-line documentation as necessary to initiate ECOs through Engineering.
      Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant.
      Install finished assemblies or sub assemblies in cases and cabinets.
      Willingness to work overtime as needed.

      ELECTRONICS TECHNICIAN I EDUCATION AND EXPERIENCE:
      Minimum of a High School Education.
      Technical Certificate in Electrical Controls is desired
      3+ years experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents.
      Highly motivated, detail oriented and able to work independently as well as in a team environment.
      Mechanical installation and electrical wiring for control panels and desks.
      Experience using hand tools to drill, tap, and assemble electrical panel is a must.

      Call Kathy Beattie/Technical Recruiter (804) 545-7154
      or email kathy.beattie@trimech.com
       
      Job Number: 10496
      Job Location: Franklin, MA
      Rate: Open
      Per Diem: No
      Overtime: yes
      Duration: 6 mos
      Start Date: ASAP
      Input Date: 09/24/2021
      Last Updated: 10/20/2021
      Firm Name: TRIMECH SERVICES LLC
      Attention: Kathy Beattie
      Address: 4461 COX RD STE 302
      City, State: GLEN ALLEN, VA 23060
      Phone: 804/257-9965
      Fax Phone: 804/257-7945
      Website: www.trimechservices.com

      Electrophysics Engineer/Scientist 4

      Description:
      Chipton-Ross is seeking a Electrophysics Engineer/Scientist 4 for an opportunity in Berkeley, MO.

      RESPONSIBILITIES:
      Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

      POSITION RESPONSIBILITIES:
      Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      Develops architectures to integrate systems and components into higher level systems and platforms
      Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      Defines and conducts tests to validate performance of designs to requirements
      Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      Writes appropriate sections of proposals to support development of new business
      Provides general mentorship

      REQUIRED SKILLS/QUALIFICATIONS:
      Posses a Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree
      Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)

      DESIRED SKILLS/QUALIFICATIONS:
      B.S Degree or higher in Electrical/Aerospace Engineering or Physics
      Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      Experience working within an engineering organization
      Experience with lightning testing and analysis

      EDUCATION:
      Accredited Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree. Accredited Bachelor of Science or higher in Electrical/Aerospace Engineering or Physics preferred.

      TRAVEL: YES
      25% travel for this role.

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:00 AM - 4:00 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      ADDITIONAL INFORMATION:
      Open to remote - would need to travel for training, additional travel associated with general requirements for the role.
       
      Job Number: 194943
      Job Location: Berkeley, MO
      Rate: $DOE
      Duration: 12 Months
      Input Date: 10/01/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Kevin Suk
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: ksuk@chiptonross.com
      Website: www.chiptonross.com

      Electrophysics Engineer/Scientist 5

      Description:
      Chipton-Ross is seeking a Electrophysics Engineer/Scientist 5 for an opportunity in Berkeley, MO.

      RESPONSIBILITIES:
      Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate multiple systems into higher level systems and platforms. Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements. Develops new and improved modeling and simulation techniques. Leads development and execution of critical tests to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Creates new tools to improve management of projects. Leads development of major sections of large-scale proposals to support development of new business. Works under consultative direction.


      POSITION RESPONSIBILITIES:
      Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
      Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
      Develops architectures to integrate systems and components into higher level systems and platforms
      Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
      Defines and conducts tests to validate performance of designs to requirements
      Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
      Provides support to products throughout their life cycle by developing root-cause analysis of anomalies and other engineering support as requested
      Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
      Writes appropriate sections of proposals to support development of new business
      Provides general mentorship

      REQUIRED SKILLS/QUALIFICATIONS:
      Engineering experience with EMC (Electromagnetic Compatibility), EMI (Electromagnetic Interference) or E3 (Electromagnetic Environmental Effects)

      DESIRED SKILLS/QUALIFICATIONS:
      Experience in a role which required knowledge of MIL-STD-704, MIL-STD-1275, MIL-STD-461, DO-160, IEC-61000, and FCC part 15
      Previous experience in the defense or aerospace industry in Electromagnetic Environmental Effects
      Experience with written and verbal communication and leading projects, along with the ability to make decisions and deliver results
      Experience working within an engineering organization
      Experience with lightning testing and analysis
      Previous experience with RF systems and antenna simulation, integration, and testing
      Experience with complex electromagnetic and RF modeling and simulation tools such as Ansys EMIT or Altair FEKO
      EDUCATION:


      EDUCATION:
      Accredited Bachelor, Master or Doctorate of Science degree from an accredited course of study, in Electrical Engineering, Computer Science, Mathematics, Physics or other technical degree. Accredited Bachelor of Science or higher in Electrical/Aerospace Engineering or Physics preferred.

      TRAVEL: YES
      25% travel for this role.

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:00 AM - 4:00 PM

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

      ADDITIONAL INFORMATION:
      Open to remote - would need to travel for training, additional travel associated with general requirements for the role.
       
      Job Number: 194942
      Job Location: Berkeley, MO
      Rate: $DOE
      Duration: 12 Months
      Input Date: 10/01/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Terry Jones
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: tjones@chiptonross.com
      Website: www.chiptonross.com

      Engineer Electronics ( Baltimore, MD ) 3552-1

      Description:
      Engineer Electronics ( Baltimore, MD ) 3552-1
      12 Month Contract to direct

      Pay rate: Open

      Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

      'I’m looking for someone with several years of experience designing, analyzing, simulating, and testing power supplies. The candidate should also have experience as a technical lead guiding and advising small teams of power supply design engineers from the whole design process from concept through integration and test. I would want someone who is interested in converting to a permanent employee.'
       
      Job Number: 3552-1
      Job Location: Baltimore, MD
      Rate: Open
      Per Diem: Yes
      Overtime: yes
      Duration: 12 Month
      Start Date: ASAP
      Input Date: 10/05/2021
      Last Updated: 11/28/2021
      Firm Name: TALENTPRO CONSULTING
      Attention: Angelia
      Address: 402 N B ST
      City, State: FAIRFIELD, IA 52556
      Phone: 641/209-3000 X201
      Fax Phone: 641/209-3001
      Email: Angelia@talentproconsulting.com
      Website: www.talentproconsulting.com

      Engineer Systems - Secret

      Description:
      PDS Tech, Inc. is seeking a Systems Engineer, Linthicum, MD.

      Essential Functions

      • As a core member of the Systems Engineering Integration and Test (SEIT) team, support the SEIT lead and embedded product Systems Engineering leads across the system lifecycle
      • Lead system engineering functions such as: CONOPS development, system architecture, subsystem design/analysis, creation and maintenance of system/subsystem requirements and interface requirements / definition documentation, timing and sizing, design reviews, system integration, test and/or verification
      • Lead/participate in the Technical Review Board (TRB) and Change Control Board (CCB) and process.

      Basic Qualifications:
      • Bachelor's Degree or higher in Systems Engineering, Electrical Engineering or other related STEM degree with a minimum of 14 years of experience in related industry (12 years of experience with a MS degree, 9 years of experience with PhD)
      • Experience leading and supporting product teams to implement airborne or ground sensor systems with focus on open architectures.
      • Experience with requirements derivation and management using DOORS or Cameo including creation and management of custom views and attributes
      • Experience defining test approaches to support requirements verification and validation.
      • Exposure to engineering tools: Cameo or Rhapsody within a DoDAF environment
      • Candidates must be willing and able to obtain and maintain an Active DoD Secret level security clearance with the willingness and ability to obtain special access and/or TS/SCI level security clearance.
       

      Preferred Qualifications:

      • Master's Degree or higher in Systems Engineering, Electrical Engineering or other related STEM degree
      • Experience with descriptive modeling, developing system and/or component level behavioral models
      • Experience with C/C++ or Python or MAtlab
      • Ability to communicate effectively with internal and external stakeholders
      • INCOSE Certification
      • Multiple domain experience across the electromagnetic spectrum (e.g., radar and electronic warfare)
      • Demonstrated knowledge of earned value management
      • Work experience and/or exposure to manufacturing
      • Work experience and/or exposure to Supply Chain Management (Subcontractors)
       

       
      Job Number: 2110141043
      Job Location: Baltimore, MD
      Duration: 9 months
      Input Date: 10/13/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Sepi Majdedin
      Address: 370 N WESTLAKE BLVD STE 120
      City, State: WESTLAKE VILLAGE, CA 91362
      Phone: 805/418-9862
      800 Phone: 866/458-4322
      Fax Phone: 805/418-9866
      Email: cecjwestlake@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jCkaQAE&URLSource=cjhunter

      Engineering Conformity Management Lead

      Description:
      PDS Tech is currently recruiting for an Engineering Conformity Planning Lead in Greensboro, NC!

      Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successfully plan conformity planning.
      Provide accurate and concise reports that reflect status and trends.  Recommend actions to correct possible deviations and / or concerning trends Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.

      Duties and Responsibilities
      Coordinate the work and support the team that will:
      • Reconcile what is planned to be conformed to data in company system
      • Entry of “Required Conformity” in Company electronic form
      • Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
      • Support the creation of RFCs in Teamcenter
      • Reconcile / ensure existence of QRs for released drawings requiring conformity
      • Create and keep updated a “database” to hold or connect the following information
      • Enter SCM information in the RFC
      • Track the completion of RFC in Teamcenter
      • Enter RFC information in NACIP
      • Reconcile RFC needs with what SAP QNs that track it have
      • Create associated reports
      • Communicate status to management and other departments
      • Follow up on DERs answers to Discrepancies

      Education, Work Experience, Certification and/or Licensure:
      • BS in Data Management / Business Administration / Engineering
      • Minimum of 5 years working with FAA related processes of conformity inspection
      • Excellent data analysis and communication skills
      • Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
      • Proficient user of Microsoft Office tools, especially Excel

      Knowledge, Skills and Abilities:

      • Ability to adapt to and work effectively within a dynamic environment
      • Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations.
      • Ability to present effectively to diverse and demanding audiences.
      • Personality requirements
      • Persistent
      • Excellent negotiation skills
      • Reliable
      • Self-motivated
      • Pro-active
      • Focused
      • Works well in teams and minimum supervision
      • Flexible
      • Goal and detail oriented



       

       
      Job Number: 2110139206
      Job Location: Greensboro, NC
      Duration: 12 months
      Input Date: 09/09/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j6CVQAY&URLSource=cjhunter

      Engineering Technician II

      Description:
      Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!

      As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

      Must-haves:
      *Associate's degree in a related field of study and at least 2 years of relevant experience
      *A higher level degree may substitute for experience
      *Related experience may be considered in lieu of required education
      *Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
      *Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

      Preferred:
      *Previous experience and/or certifications within the aerospace and defense industry
      *Previous experience in a manufacturing environment
      *Experience with AutoCAD or other 3-D CAD software
      *The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances

      IMPORTANT NOTICE:
      To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
       
      Job Location: Middleton, WI
      Rate: $25/HR - $29.50/HR
      Per Diem: Possible
      Overtime: Possible
      Duration: Long Term Contract
      Start Date: ASAP
      Input Date: 10/04/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Corey Halliday
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: corey.halliday@thestructurescompany.com
      Website: www.thestructurescompany.com

      Environmental Validation Engineer

      Description:
      PDS Tech Inc., is seeking an Environmental Validation Engineer in Troy, MI

      Overview:
      Responsible for Environmental Validation activities from RFQ to final customer’s acceptation.
      The Environmental Validation Engineer leads the environmental test activities according to the company’s rules and international standards.

      Responsibilities:
      • Responsible for determining the scope and needs of Environmental tests.
      • Responsible to book resources (Chambers, external l ab)
      • Realize the test (electrical, mechanical, environmental, reliability) in the standard time and in line with the instruction sheet (test specification) and according to projects and customer’s milestones.
      • Defines environmental test cases according to requirements and Environmental test standards.
      • Develops, maintains and drives Environmental Test Plan and Environmental Test Specification to approval.
      • Prepare and review of the environmental test reports.
      • Explains and discusses the environmental test results with the project team and customers.
      • Reports status and problems to the Project team, R&D PTM, and other Metiers.
      • Prepares FVS (Fixe, Variable, Specific) check from Environmental Validation perspective.
      • Performs Environmental Validation risk analysis.
      • Maintain up to date Dashboard and Environmental Tool calendar.
      • Provide work instruction to test houses to enable efficient transfer of test equipment.
      • Contribute to product problems solving, support 5W2H / PDCA.
      • Contribute to the improvement of the laboratory’s tools such as: Instruction sheets, logs, development and validation tools.
      • Improve test efficiency
      • Carry out all work to comply with Quality Management System and Validation Engineering Processes e.g. ASPICE, ISO/IATF16949.
      • Coordinate logistics of test racks from and company’s local laboratory and other laboratories worldwide.
      • Track all equipment sent off site with Tracking number to be kept on file.


       
      Qualifications:
      • Bachelor’s in computer science, electrical or mechanical engineering.
      • Min. 2 years’ experience and knowledge of test & validation methods in the automotive industry
      • Knowledge of automotive electronics systems
      • Proficient with MS Office / Google Suite.
      • Basic knowledge in National Instruments LabVIEW and TestStand software - Certified LabVIEW
      • Basic knowledge instrumentation interfacing over PXI, PCI, USB, RS232 & GPIB
      • Basic knowledge in hardware and peripherals
      • Ability to read, analyze and interpret complex documents /schematics.
      • Basic knowledge of automotive electronics systems
      • Validation experience with knowledge of test & validation methods
      • Basic knowledge of accelerated life testing
      • Basic knowledge of IATF 16949


       
       
      Job Number: 2110140551
      Job Location: Troy, MI
      Duration: 12 months
      Input Date: 09/28/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Melissa Cuellar
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jBIAQA2&URLSource=cjhunter

      Fabrication Specialist A

      Description:
      Chipton-Ross is seeking 20 Fabrication Specialist A's for an opening in West Jordan or Salt Lake City, UT.

      RESPONSIBILITIES:
      Performs machine set-up, machining, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

      EDUCATION:
      Education/experience typically acquired through basic education (e.g. high school diploma/GED).

      FULL TIME/FIRST & SECOND SHIFT
      WORK HOURS: 6:45 AM-3:30 PM OR 3:30 PM -12 AM
       
      Job Number: 195144
      Job Location: Salt Lake City, UT
      Rate: $DOE
      Duration: 12 Months
      Input Date: 10/08/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Brent Sizemore
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: bsizemore@chiptonross.com
      Website: www.chiptonross.com

      Fabrication Specialist A

      Description:
      Chipton-Ross is seeking 20 Fabrication Specialist A's for an opening in Salt Lake City, UT.

      RESPONSIBILITIES:
      Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

      EDUCATION:
      Education/experience typically acquired through basic education (e.g. high school diploma/GED).

      FULL TIME/FIRST & SECOND SHIFT
      WORK HOURS: 6:45 AM-3:30 PM OR 3:30 PM -12 AM
       
      Job Number: 193710
      Job Location: Salt Lake City, UT
      Rate: $DOE
      Duration: 12 Months
      Input Date: 08/18/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Brent Sizemore
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: bsizemore@chiptonross.com
      Website: www.chiptonross.com

      Fabrication Specialist A

      Description:
      Chipton-Ross is seeking 10 Fabrication Specialist A's for an opening in Salt Lake City, UT.

      RESPONSIBILITIES:
      Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

      EDUCATION:
      Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

      FULL TIME/FIRST SHIFT
      WORK HOURS: 8:00 AM - 5:00 PM
       
      Job Number: 191966
      Job Location: Salt Lake City, UT
      Rate: $DOE
      Duration: 6 Months
      Input Date: 06/15/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Cody Reposa
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: creposa@chiptonross.com
      Website: www.chiptonross.com

      Gen Electro/Mech Assm Spec D

      Description:
      Chipton-Ross is seeking a Senior Electrical-Electronic Assembly Specialist for an opening in Germantown, MD

      RESPONSIBILITIES:
      Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.

      POSITION RESPONSIBILITIES:
      Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
      Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
      Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
      Coordinates with supervisor to establish work priorities.
      Works under minimal supervision.

      REQUIRED SKILLS/QUALIFICATIONS:
      Must have 5+ yrs experience soldering components on PC board assemblies

      Minimum of High School Diploma or GED.
      More than 5 years of experience in electronics and electro-mechanical assemblies.
      More than 5 years of experience in a manufacturing or assembly environment.
      More than 5 years of experience performing soldering and electronics repair to the component level.
      More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.

      Preferred Qualifications (Desired Skills/Experience):
      Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.

      Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification

      EDUCATION:
      Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)

      FULL TIME/FIRST SHIFT
      WORK HOURS: 7:30 AM - 4:00 PM

      ADDITIONAL INFORMATION:
      Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

      Successfully completing OJT is a contingency for this assignment

      Position is onsite; no remote option

       
      Job Number: 194164
      Job Location: Germantown, MD
      Rate: $DOE
      Duration: 6 Months
      Input Date: 09/02/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Christopher Conaway
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: cconaway@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Hardware Design Engineer

      Description:
      Job Description: Responsibilities include:

      -Performing Design Architecture activities for various programs and IRAD projects
      -Ability to perform FPGA/Firmware architecture and design
      -General knowledge of standard test equipment such as oscilloscopes, signal generators, and spectrum analyzers
      -Working with Hardware Engineering Team to complete Hardware Development, Simulation and Verification for digital signal processing and general processing projects
      -Supporting Integrated Product Teams, Engineering Project Manager, and Program Office staff to meet all customer objectives and program milestones.

      Candidate will be responsible for the analysis, design, programming, debugging and modification of software and troubleshooting code for firmware (IC embedded code) applications.
      Work often involves analog and digital hardware and software operating systems.
      Position requires knowledge and exposure to hardware design.
      Typically programs in machine language, assembly language and high level languages (e.g., C, C++).

      Basic Qualifications :
      - Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5-7 years of professional experience designing FPGAs using System Verilog/Verilog/VHDL; or 3 years of professional experience with a related Masters degree.
      - Applied knowledge of either the Altera or Xilinx FPGA devices and their associated application environments.
      - Candidates to have excellent oral and written communication skills and work well in small teams.

      Desired skills :
      - Electronic Warfare experience
      - Digital Signal Processing knowledge
      - Candidate should demonstrate practical experience with implementation of proofs, test requirements, and certification requirements
       
      Job Number: 0596
      Job Location: Owego, NY
      Rate: $40-$50/hr
      Duration: 5 Months
      Start Date: 10/25/2021
      Input Date: 09/30/2021
      Firm Name: INC EMPIRE LLC
      Attention: Cynthia Lashley
      Address: 111 W FRANKLIN ST
      City, State: DELPHI, IN 46923
      Phone: 765/426-1702
      Website: www.incempirellc.com

      Instrument Technician

      Description:
      Chipton-Ross is seeking an Instrument Technician for an opening in Torrance, CA.

      RESPONSIBILITIES:
      Need for an experienced INSTRUMENT TECHNICIAN to calibrate electronic equipment used to support manufacturing operations. Will calibrate a variety of items including ESD workstations, power supplies, DVMs, power meters, lab standards, RF and high-voltage systems, and test stations used for RF amplifier and power component testing.


      REQUIREMENTS:
      At least five years of experience performing equipment calibration
      AC/DC calibration experience verifying voltage, current, and resistance measurements of test equipment and standards
      Ability to troubleshoot equipment, utilizing schematics to carry out required equipment adjustments and minor repairs, is preferred
      Proficient in Ohms Law theory and measurement calculations
      PC proficiency using Microsoft Word and Excel
      Effective written and verbal communication skills are required
      Ability to work well in a team environment
      Understanding of Mil Standard 45662A and ANSI Z540 calibration system requirements
      Experience writing and/or modifying calibration procedures
      Some computer programming experience would be helpful


      EDUCATION:
      An associate's degree in electronics is preferred

      SHIFT:
      9/80
      7AM-4:30PM


      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.





       
      Job Number: 190276
      Job Location: Torrance, CA
      Rate: $30 to $36.00 DOE
      Duration: 5 months
      Input Date: 03/29/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Juan Saldarriaga
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jsaldarriaga@chiptonross.com
      Website: www.chiptonross.com

      Integration Engineer

      Description:
      An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

      Integration Engineer 2 duties:

      * Develop and perform circuit card level and unit level testing to ensure a successful product
      delivery to customer's aircraft.
      * Develop and document test equipment to support lab testing.
      * Provide technical assistance to senior staff in support of current programs.
      * Prepare and review custom test equipment drawings and designs, using electrical and
      mechanical hardware and software, with guidance from other engineers, to enable test of
      aircraft electrical power equipment.
      * Analyze and solve a variety of technical problems through use of test data and specification
      requirements. Organize and analyze data and document results. Review results to ensure their
      accuracy and appropriateness.
      * Prepare and present technical information of limited scope for internal engineers, program
      personnel, and other internal customers.
      * Acts as an individual contributor, building stable working relationships internally through tasks
      and assignments.
      * Guide internal technicians as required in performing system integration and development tests
      and custom test equipment build.

      EDUCATION AND EXPERIENCE REQUIRED:

      * Electrical engineering background with a Bachelor of Science - Electrical Engineering degree.
      * 2 plus years of experience
      * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
      lawfully admitted into the U.S. as a refugee or granted asylum.

      If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


       
      Job Number: 316988
      Job Location: Kirkland, WA
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 10/13/2021
      Last Updated: 11/29/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      City, State: West Region
      Email: sswatkins@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=316988&job_number=316988

      Integration Engineer

      Description:
      An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

      Integration Engineer 2 duties:

      * Develop and perform circuit card level and unit level testing to ensure a successful product
      delivery to customer's aircraft.
      * Develop and document test equipment to support lab testing.
      * Provide technical assistance to senior staff in support of current programs.
      * Prepare and review custom test equipment drawings and designs, using electrical and
      mechanical hardware and software, with guidance from other engineers, to enable test of
      aircraft electrical power equipment.
      * Analyze and solve a variety of technical problems through use of test data and specification
      requirements. Organize and analyze data and document results. Review results to ensure their
      accuracy and appropriateness.
      * Prepare and present technical information of limited scope for internal engineers, program
      personnel, and other internal customers.
      * Acts as an individual contributor, building stable working relationships internally through tasks
      and assignments.
      * Guide internal technicians as required in performing system integration and development tests
      and custom test equipment build.

      EDUCATION AND EXPERIENCE REQUIRED:

      * Electrical engineering background with a BSEE degree.
      * 2 plus years of experience
      * Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
      lawfully admitted into the U.S. as a refugee or granted asylum.

      If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

      Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


       
      Job Number: 315149
      Job Location: Kirkland, WA
      Rate: --
      Per Diem: --
      Overtime: --
      Start Date: --
      Input Date: 08/12/2021
      Last Updated: 11/29/2021
      Firm Name: BELCAN TECHSERVICES
      Attention: ScottWatkins
      City, State: West Region
      Email: sswatkins@belcan.com
      Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=315149&job_number=315149

      Jobsite Admin Support

      Description:
      Summary:
      Assist individuals involved in the assigned construction project to ensure deadlines and
      customer expectations are met.
      Essential Duties and Responsibilities include the following: Other duties may be assigned.
      • Answer phone calls and take clear messages or route calls to the appropriate individual.
      • Schedule meetings and meeting arrangements.
      • Maintain master filing system for jobsite use, in both electronic and hard copy formats, where
      applicable.
      • Coordinate transmittals, mailings and large volume photocopying.
      • Expedite paperwork as needed.
      • Develop and maintain spreadsheets, edit and distribute correspondence as needed.
      • Coordinate shipping and receiving of any parcels/letters.
      • Monitor consistency and accuracy of project correspondence.
      • Coordinate, develop, and distribute minutes of project meeting and other related documents
      (budgets, schedules, resource needs, etc.)
      • Maintain communication with project coordinator.
      • Performs additional duties per supervisor’s direction.
       
      Requirements:
      *Construction experience would be great.  Must have strong MS Office experience.  Experience in Oracle, Bluebeam is a plus.
      • Minimum of two years administrative support experience, preferably in a construction
      environment.
      • Working knowledge of MS Word and Excel.
      • Possess exceptional organizational, communication (written and oral) and prioritization skills.
      • Ability to work autonomously.
      • Fulfill and complete urgent needs.
      • Present self with a professional, mature and positive demeanor.
      • Ability to work with a variety of personalities.
      Computer Skills:
      To perform this job successfully, an individual should have knowledge of MS Access, Excel, and
      Word.  *Individual will be working on an active construction site from a job trailer. 

       
       
      Job Number: 2110136416
      Job Location: Lone Rock, WI
      Duration: 12 months
      Input Date: 09/22/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Kristen Schabell
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iwdhQAA&URLSource=cjhunter

      LIDAR Tech I

      Description:
      PDS Tech, Inc. is seeking a LIDAR Technician I in Carpinteria, CA
       
      Overview: 
      The Systems Engineering Department of the ADAS Business Unit NAFTA conducts system level testing of lidar sensors for sample production in support of product development for OEM projects. This includes meeting OEM Customer performance requirements which are verified Bench level (L2) Test Stations testing and comparing this performance against defined Customer requirements.
       
      Responsibilities:
      • Building wire harnesses and test boxes for bench test systems and vehicle builds.
      • Perform functional bench tests of ADAS products and data acquisition systems.
      • He/she will report to and receive training, daily guidance and work packages from the ADAS Supervisors and their staff.  Additional support and guidance will be provided by the Contract Company’s Team leader.

      Qualifications:
      • Associates degree in a technical field (preferably automotive).
      • 2+ years experience in an electrical/electronics test lab environment.
      • Excellent organizational, verbal and written communications skills.  The candidate must be able to clearly and effectively communicate in English.
      • Computer proficiency with basic computer programs including the Microsoft office suite (Word, Excel, and PowerPoint).
      • Ability to read/understand electrical schematics.
      • Familiar with automotive hardware, such as switches, relays, power distribution, etc.
      • Proficient with common hand tools, power tools, soldering equipment, and multimeters.
      • Posses the mechanical ability to build and de-bug wire harnesses and break-out boxes.
      • Well motivated, self starter, high integrity and team player.
      • Able to work in a team environment, flexible, and able to multi­task to meet project timing (time management skills)
      • Valid driver’s license with clean driving record.
      • Must be able to lift 25 pounds.
      • Logical problem solver with good attention to detail.


      Preferred Qualifications:

      • 3+ years experience in automotive component testing.
      • Component Data analysis post processing; compiling and analysis of test results.
      • ­ADAS component and feature knowledge.
      • Computerized data logging systems experience.

       
      Job Number: 2110133735
      Job Location: Carpinteria, CA
      Duration: 12 months
      Input Date: 08/13/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Luke Polansky
      Address: 300 E JOHN CARPENTER FWY STE 700
      City, State: IRVING, TX 75062
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9630
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PtNJQA0&URLSource=cjhunter

      Manufacturing Planners // Multiple Positions

      Description:
      Manufacturing Engineer OR Planner 4

      Location: San Antonio, TX
      Duration: 8+ Months

      Note: Bachelor’s degree is needed for Engineering and not for planner roles

      Description:
      Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

      Review Wire Harness Assembly (WHA) engineering design releases, ensuring producibility of designs and configuration management control (i.e. engineering changes). Knowledge & application experience/use of the Client WIRS system is desired (familiarity of resident reports a plus). Experience with all aspects of Wire Harness Assembly change management / processing / implementation a plus. Knowledge & demonstrated use of the Client WIRS system and Client’s Integration Visibility Tool (IVT) desired.
      Experience with Wiring component standards/sourcing/supply base a plus.
      Looking for experience in Functional/Flight Test, Interiors, Wiring, Payloads specifically.
      Perform producibility reviews of Electrical Production Illustration drawings (Wiring Installation Drawings), and Electrical Provisions (support bracketry - details/Assemblies/Installations), ensuring design for manufacturability standards are supported and represented.
      Support and drive the development, implementation, and maintaining of Electrical build plans, Bill of Materials, and Work Instructions to define and document the as-built airplane configuration. Support integration activities associated with suppliers, process development and/or enhancements, procurement kitting, and data/technology analysis to meet manufacturing and deliverable requirements.
      Experience / Familiarity with all aspects of Wire Harness installation, Pre-Installation and Post-Installation Wire Harness Assembly Testing (Fully terminated Wire Harnesses, and Termination performed on aircraft), and the ability to develop wiring tooling requirements based on manufacturing and engineering requirements. Experience / familiarity with different aspects of Wire Harness testing desired.
      General experience with typical committed change processes, and the ability to author impact statements in support of, desired.
      Experience / familiarity with certificate of conformance, and conformity support actions in general, a plus.
      Knowledge of Microsoft Office tools a must; focus being on advanced excel data analytical skills.
      Knowledge of Jira Software, a plus.
      Ability to work under minimal direction. Able to work within team assigned, and possess the experience to know when to reach out to other teams when warranted.

      Skill Code: 67B-Electrical/Electronics
       
      Job Location: San Antonio, TX
      Rate: Open
      Per Diem: Split
      Overtime: Yes
      Duration: 8 months
      Start Date: ASAP
      Input Date: 11/08/2021
      Last Updated: 11/18/2021
      Firm Name: ICONMA LLC
      Attention: Mohamed Zoheb
      Address: 850 STEPHENSON HWY STE 612
      City, State: TROY, MI 48083
      Phone: 248/602-3856
      Email: mzoheb@iconma.com
      Website: iconma.com

      Manufacturing Technician

      Description:
      Chipton-Ross is seeking a Manufacturing Technician for an opening in Santa Clara, CA.

      SUMMARY:
      The Manufacturing Technician job duties include system level assembly, integration, setup, testing and advanced troubleshooting of automated control systems while achieving/exceeding the quality standards.

      RESPONSIBILITIES:
      Build and Functional Verification testing of automated control systems and sensors. Assembling, cabling, programming controllers and debugging automated bio-reactor systems. Assembling, modifying and debugging major subsystems. Modifying, upgrading debugging Control Towers. SUB agitators, sensor transmitters. Programming transmitters and controllers. Building cables, hoses etc. as needed
      Building, testing and modifying Mass Flow Controller Assemblies. Stage systems for integration and testing. Support Production Planning on Work Order requirements, parts issued etc.. Support Engineering activities as required. Redline/correct released drawings and documents. System teardown and packaging for shipment. Able to lift 25-30 lbs. unassisted. As a Subject Matter Expert, support system level troubleshooting and the group's training activities

      REQUIREMENTS:
      Minimum 2+ years in a similar system level assembly and testing production environment. Knowledgeable of equipment and methods of assembly and test processes of electro-mechanical assemblies. Progressive experience working with assembly & test work instructions, assembly layout drawings & wiring schematics, work order BOMs and complete equipment travelers. Knowledge, Skills, Abilities. Excellent verbal communication and technical writing skills. Able to work in cleanroom environment and follow cleanroom protocol. Self-motivated while possessing the ability to work in a team environment as well as independently. Basic computer setup, navigation, keyboarding. Demonstrate Proficiency in Microsoft Office applications (Word, Excel, PowerPoint)
      Production floor work environment - job duties may include standing, bending, kneeling, reaching overhead, lying down and elevated surfaces to access certain sections of the control systems

      EDUCATION:
      Accredited High School Diploma/GED
      Accredited AS Electronics degree/relevant technical trade school training and experience preferred.
      Technical Certification/Licenses a plus

      WORK HOURS:
      Full-Time
      This is a day shift - 7-4 or 8-5.
       
      Job Number: 194384
      Job Location: Santa Clara, CA
      Rate: Up to $29.00 DOE
      Duration: 12 mos
      Input Date: 09/30/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: Juan Saldarriaga
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: jsaldarriaga@chiptonross.com
      Website: www.chiptonross.com

      THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
      Mechanical Design Drafting Support #10413

      Description:
      Mechanical Design Drafting Support Position Responsibilities:
      Create and/or refine innovative and practical opto-mechanical and electro-mechanical layouts using Solidworks 3D CAD software.
      Develop clean documentation packages and design records which includes maintaining change
      records and revision control.
      Generate fabrication and assembly drawings, bills of material, and maintain revision control of project documentation.

      Mechanical Design Drafting Support Position Required Qualifications:
      8+ years of design drafting work experience.
      Formal training in design drafting and GD&T highly preferred.
      Demonstrated experience in SolidWorks 3D CAD, document management tools and techniques (PDM), and revision control practices.
      Ability to assess and apply geometric tolerances in complex and precision hardware assemblies.
      Ability to research data that is required to further develop designs using historical precedents,
      manufacturer's catalogues, and technical guides. Successfully combines findings with preliminary information to contribute to establishing final designs.
      Familiarity with MIL specs and aerospace standards for specifying materials, hardware, and finishes.

      Mechanical Design Drafting Support Position Preferred Qualifications:
      Design experience packaging and documenting products containing optical elements, structures
      and electronics for space and airborne environments.
      Experience in hardware design for severe shock, vibration, and thermal environments.
      Experience routing cables in 3D CAD assemblies.
      Design of bonded assemblies (especially optical mounting) and experience with design for
      adhesive applications.
      Military and defense related hardware design work.
      Hardware design experience for space or vacuum environments especially with selecting materials based on outgassing properties and contamination control.
      DTUPC, DFT, DFM methodologies and experience.

      Call Kathy Beattie/Technical Recruiter (804) 545-7154
      or email kathy.beattie@trimech.com
       
      Job Number: 10413
      Job Location: Acton, MA
      Rate: Open
      Per Diem: possible
      Overtime: possible
      Duration: 12 mos
      Start Date: ASAP
      Input Date: 09/23/2021
      Last Updated: 10/20/2021
      Firm Name: TRIMECH SERVICES LLC
      Attention: Kathy Beattie
      Address: 4461 COX RD STE 302
      City, State: GLEN ALLEN, VA 23060
      Phone: 804/257-9965
      Fax Phone: 804/257-7945
      Website: www.trimechservices.com

      Mechanical Engineer (Electronic Manufacturing)

      Description:
      PDS Tech is is seeking a highly motivated and self-driven candidate qualified for the position of Mechanical Engineering to be a part of a market leading Celestica Hardware Design Group. The successful candidate will be responsible for mechanical engineering assignments related to hardware products as well as systems including development of new products, updates to existing products or sustaining current products. The candidate will be responsible for developing or executing project plans, and documentation of work and test results. The candidate will demonstrate a deep understanding of mechanical engineering and all aspects of hardware development. 
       
      Performs tasks such as, but not limited to the following:
      • Interfaces with potential customers to help define their needs and to present technical proposals to meet those needs. 
      • Ensures proposals meet requirements for design profitability, manufacturing profitability, etc.
      • Provide design and development feedback on projects and schedules
      • Participate in cross functional teams in the design and documenting assemblies
      • Apply engineering knowledge and skills to develop new leading edge technologies. 
      • Work independently and in a team environment.
      • Provide technical support to business development teams to assist in the winning of new business.
      • Maintain current on industry trends and future technology and market opportunities.

       
      Knowledge/Skills/Competencies:    

      • 11+ years of relevant experience.
      • Engineering Foundation Competencies
      • In-depth knowledge and understanding of the business unit and how decisions impact customer satisfaction, product quality, on-time delivery and the profitability of the unit.
      • In-depth knowledge and understanding of engineering design and development, and production in a highly dynamic manufacturing environment.
      • Broad knowledge of an electronic manufacturing environment, materials and processes.
      • Excellent analytical, negotiation and problem resolution skills.
      • Ability to establish business unit goals and coordinate a wide variety of resources to meet quality and quantity metrics.
      • Ability to effectively communicate with a wide variety of internal and external customers.
      • Ability to effectively lead, train and motivate a diverse group of employees to meet high levels of technical requirements within tight time deadlines.

       
      Typical Education:    
      Bachelor’s or Master’s degree in Electrical or Computer Engineering is preferred
      Educational Requirements may vary by Geography

       

       

       
      Job Number: 2110137103
      Job Location: Richardson, TX
      Duration: 6 months
      Input Date: 08/13/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Stephanie Spolzino
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003iyl3QAA&URLSource=cjhunter

      Mechanical Systems Engineer (Contract)

      Description:

      PDS is looking for a Mechanical Systems Engineer in Wichita, KS:



      As part of a team of engineers, supply expertise primarily in the ECS/Pneumatics field (air conditioning, cabin pressurization, anti-ice and oxygen systems) or other systems required to support the development and certification flight testing of Bombardier Aerospace products.

      In your role, you will:
      • Produce engineering (design drawings) for the repair or modification of these aircraft systems
      • Provide specialist advice relating to test methods and procedures for these systems
      • Perform liaison with off-site Design Engineering core group
      • Produce aircraft level ground/flight test definition sheets
      • Review and analysis of data obtained from ground and flight tests of these systems
      • Produce ground/flight test reports
      • Prepare plans for troubleshooting aircraft/systems problems, and oversee the implementation of these plans by licensed aircraft mechanics
      • Sign flight release documentation (including safety of flight judgments) discrepancies or non-standard modifications.
      • Travel some, if required

      Qualifications
      As our ideal candidate,
      • You must have a Bachelor’s degree in Mechanical / Electrical/ Aerospace Engineering with 2 years of working experience in ECS & Oxygen OR a minimum of four years of working experience in ECS & Oxygen if no degree.
      • You have experience in flight-testing of civil aircraft and a good working knowledge of FAA & JAA certification requirements (FAR 25 or JAR 25) (preferred)
      • You have the bility to interpret software documentation including logic diagrams related to electronic control of ECS/Pneumatics systems.
      • You have experience with utilizing ARINC data to isolate faults related to system controls software.
      • You have good communication and teamwork skills, both oral and written.
      • You have interpersonal skills necessary to establish and maintain effective working relationships with co-workers, employees, management and contractors.
      • You must be self-motivated, able to coordinate multiple activities and manage time effectively.

       
      Job Number: 2110130724
      Job Location: Wichita, KS
      Duration: 12 months
      Input Date: 07/26/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Marjorie Santiago-Marquez
      Address: 11828 W CENTRAL STE 100
      City, State: WICHITA, KS 67212-5129
      Phone: 316/729-1800
      800 Phone: 800/333-8644
      Fax Phone: 316/729-1857
      Email: cecjwichita@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003PkowQAC&URLSource=cjhunter

      Multi-craft Technician

      Description:
      POSITION SUMMARY:  Responsible for performing preventive maintenance on all plant equipment, Repairing all plant equipment, installing all new plant equipment, maintaining safe and efficient work condition for all mobile equipment, performing electrical work, working with outside contractors on equipment, and keeping parts rooms neat and orderly.
       
      RESPONSIBILITIES & EXPECTATIONS: What are the 5-8 major responsibilities/activities of the role and 2-3 major expectations attributed to each activity?

      1. Perform the repair and preventative maintenance of process equipment.  
      • Troubleshoot problems in electrical circuits, electric motors, starters, and VFD’s. 
      • Perform daily inspection and calibration as needed of process control equipment and environmental compliance equipment.
      • Troubleshoots electronics, electronic equipment controls, electrical distribution systems and computer hardware and software.  Repairs/replaces defective computer components and network devices as needed.
      • Maintains, supports and documents computer and network hardware and software applications and operating systems.
      • Review the preventative and predictive maintenance systems to ensure that the defined activities are sufficient to identify potential sources of failure before failures occur.

      2. Reporting

      • Report any unsafe condition to a supervisor immediately
      • Complete pre-shift inspection on equipment
      • Complete time use maintenance reports


      3. Inventory

      • Assist in tracking inventory as directed


      4. Safety

      • Attend safety meetings
      • Enforce company, local, state and federal safety policies and procedures
      • Maintain Company and Federal House Keeping Standards.
      • Perform all work assigned in a neat and orderly manner, adhering to company and governmental safety rules and regulations.
      • Report any potential operational or safety problems to supervision.
      • Know and follow lock out tag out procedures.
      • Must have a high regard of other’s safety in the field.
      • Set an impeccable example with respect to safe behavior, adherence to Environmental, Safety, and Health policies, and activities linked to the performance of maintenance work without incident or injury.
      • Tell the Maintenance Manager, Mine Manager, or Mine Foreman of safety hazards, repairs, or help that is needed to operate the plant in a safe and efficient manner.
        • Perform preshift inspections and document them.
        • Operate the plant within its means to help minimize issues that could occur from break downs and plug up.



       


       
      Job Number: 2110140951
      Job Location: Crab Orchard, TN
      Duration: 6 months
      Input Date: 10/06/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Jack Beard
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003jCZCQA2&URLSource=cjhunter

      Office Administrator C

      Description:
      Chipton-Ross is seeking a Office Administrator C located in Huntsville, AL.

      RESPONSIBILITIES:
      Performs the following tasks for managers on the executive payroll. Coordinates and processes domestic and international business travel arrangements, monitors designated business traveler''s logistics, generates expense reports and assists in reconciling corporate credit card changes to ensure timely and accurate reimbursement and verifies payments to corporate credit cards. Collects and compiles data to provide visibility of status for traveler''s review and/or signature. Creates, edits and maintains electronic and written communication. Tracks and maintains information relative to department and business operations. Verbally communicates a wide variety of information to multiple audiences. Processes incoming and outgoing communication and correspondence to ensure proper dissemination of information. Prioritizes and schedules management-level employee time and availability for efficient use of time. Tracks and maintains designated conference room schedules for availability and efficient use of resources. Coordinates with the appropriate focal(s) to support the acquisition and maintenance of resources. Orders and maintains office supplies. Plans and implements logistics for executive level internal and external events. Provides guidance for less experienced employees. Works under limited supervision. Plans, schedules, and arranges own activities in alignment with business' and executive's priorities.

      REQUIRED EXPERIENCE:
      Exceptional organization skills, able to track and de-conflict multiple items concurrently. Experience with Microsoft Office (Excel, Word, PowerPoint, Outlook). Experience with coordinating and processing travel arrangements both domestic & international. Experience with general expense reports. Experience with reconciling corporate credit cards. Experience with PowerPoint and creating presentations. Demonstrated skills in verbal and written correspondence.

      EDUCATION:
      Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

      WORK HOURS:
      Full-Time/First Shift
      8:00 am - 5:00 pm

      MISCELLANEOUS:
      Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
       
      Job Number: 195020
      Job Location: Huntsville, AL
      Rate: $DOE
      Duration: 12 months
      Input Date: 10/06/2021
      Last Updated: 11/29/2021
      Firm Name: CHIPTON ROSS
      Attention: LaVada Pulley
      Address: 420 CULVER BLVD
      City, State: PLAYA DEL REY, CA 90293
      Phone: 310/414-7800 X286
      800 Phone: 800/927-9318
      Fax Phone: 310/414-7808
      Email: lpulley@chiptonross.com
      Website: www.chiptonross.com

      Office Assistant

      Description:
      PDS Tech, Inc. is seeking Office Assistant
      • Pay Rate: $15.50
      • Will this be remote or onsite: Onsite; 100%
      • Shift Times/Days: days; 8-5; with a little flexibility; can work 35 hours per wk;


      Description:


      • Print and collate documents
      • Maintains electronic process for identifying and compiling incoming records from multiple sources
      • Prepare paperwork for QC Outsource Testing to submit to QA
      • Maintains organized records completely, accurately, and contemporaneously
      • Navigate and manage excel spreadsheets, word documents, PDFs, and emails
      • Coordinate with QC systems specialist to ensure all products are entered into LIMs properly
      • May assist with sample submissions to Contract Testing Labs
      • Maintain metrics on Contract Testing Lab’s performance
      • Follow written standard operating procedures
      • Maintains and ensures safe environment and work practices
      • Performs other office duties as assigned to support Outsource Manager and Specialists
      • This position is a M-F daytime role with flexibility minor adjustments in hours. Flexibility and overtime may be required on holidays and weekends to support project timelines.

      Qualifications:


      • Knowledge of controlled documents, filing and printing documents; experienced user of excel to track and electronic files
      • Able to sort through electronic files and store



      Nice to have:


      • Experience with LIMS or other electronic lab data capturing systems
      • Experience working with controlled documents

       
      Job Number: 2110140096
      Job Location: Alachua, FL
      Duration: 12 months
      Input Date: 09/29/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Lucinda Contreras
      Address: 900 CIRCLE 75 PKWY SE STE 600
      City, State: ATLANTA, GA 30339
      800 Phone: 866/224-2745
      Email: southeastjobs@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j9l5QAA&URLSource=cjhunter

      Principal Instrumentation Engineer

      Description:
      In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.

      Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.

      This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.

      Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:

      Define requirements for onboard data acquisition and telemetry system
      Direct small team of engineers & techs to meet the needs of the program
      Design and implement hardware and software solutions for ground and flight test
      Work closely with vendors and partners
      Install sensors, wiring, an any required electronic equipment in experimental test vehicle
      Generate and review wiring diagrams, bill of materials, and installation drawings
      Prepare data system for daily test execution
      Calibrate, validate, document, and troubleshoot all installed sensors and equipment
      Participate in ground, bench, and flight tests.
      Data capture, storage, processing and analysis.
      Draft proposals, cost estimates, plans, reports, and other documents as required
      Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
      Qualifications:

      10+ years instrumentation experience in experimental flight test
      Experience leading an instrumentation effort is strongly preferred
      Experience in Data Acquisition and software integration
      Applicant must have experience using MS Excel, and MS Word
      Applicant must demonstrate good technical writing skills
      Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
      Fluency in written and spoken English is required
      Education:

      B.S. in Electrical Engineering or equivalent.

      The Structures Company LLC is an AA/EOE.
       
      Job Number: 498
      Job Location: Arlington, WA
      Rate: Up to $80/Hr., DOE
      Per Diem: Possible
      Duration: 6-12 Months, possibly longer
      Start Date: ASAP
      Input Date: 07/01/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Debbie Aubert
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: Debbieaubert@thestructurescompany.com
      Website: www.thestructurescompany.com

      Principal Software Engineer

      Description:
      PDS Tech, Inc is hiring Principal Software Engineer in Clearwater, FL.  As a PDS Tech employee, you will be on assignment at Honeywell.


      Job Description:
      • This role involves low level SW development of board support packages, including RTOS integration, device driver development and debugging of HW and SW in the development on aerospace electronic systems.
      • Requires working knowledge of Ultrascale+, JIRA and Bitbucket.
      • Experience with Lauterbach (or similar) debugging tool a plus.
      • Possesses the ability to write test scripts to test SW features and to run regression tests.
      • Knowledgeable in building the SW release. Also, coordinates work teams.
      • Provides technical support to project team members.





       
      Qualifications:
      • Bachelor's degree in area of specialty, required
      • 8+ years of experience in the field or in a related area
      • US Citizenship Required
      • Software Development Life Cycle process development; requirements, design,
      • implementation, unit and integration testing phases.
      • Embedded software development on ARM-based microcontrollers, ARMv7 and
      • ARMv8 instruction sets
      • Developing device drivers for communication interface buses, such as PCIe,
      • Serial I/O, IEEE-488
      • Utilizing Eclipse-based, cross compilation software development environments to build and debug software on target hardware
      • Utilizing and developing embedded software for Real-Time Operating Systems (RTOS)
      • Developing software using Quantum Leaps QP/C active object framework
      • Maintaining software under version control using SubVersion or similar Software version control systems
      • Utilizing Atlassian Jira (or similar) for issue tracking
      • Familiar with static code analysis and Xilinx software development tools

       
      Job Number: 2110138821
      Job Location: Clearwater, FL
      Duration: 6 months
      Input Date: 09/28/2021
      Last Updated: 11/29/2021
      Firm Name: PDS TECHNICAL SERVICES
      Attention: Casey Carrion
      Address: P O BOX 619820
      City, State: DALLAS, TX 75261-9820
      Phone: 214/647-9600
      800 Phone: 800/270-4737
      Fax Phone: 214/647-9636
      Email: cecjnrt@pdstech.com
      Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003j50KQAQ&URLSource=cjhunter

      Product Review Engineer 2 - Liaison Engineering

      Description:
      Description

      Applies basic knowledge of design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer. Analyzes, conducts failure analysis, root cause analysis and troubleshoots to understand root cause. Provides assistance to identify solutions. Provides written dispositions for routine design non-conformances. Supports activities to identify deviations that could impact design intent and safety and product/process improvements. Develops routine customer correspondence for continued safe operation and maintenance of equipment. Participates in Material Review Boards and Integrated Product Teams (IPTs). Ensures supplier and build partner comply with Boeing standards. Represents the engineering community in the build through post production environment. Recommends simple non-destructive test procedures, tools, standards. Conducts simple static strength analysis to validate interim design repairs meet original design loads criteria.

      Required Skillsets:
      1+ years of hands Electronics troubleshooting experience
      ENG Degree Required

      Preferred:
      RF Experience

      Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
       
      Job Number: 46182-1
      Job Location: Heath, OH
      Rate: DOE
      Per Diem: Yes
      Overtime: Yes
      Duration: 6-12 months+
      Start Date: ASAP
      Input Date: 09/23/2021
      Last Updated: 11/29/2021
      Firm Name: STRUCTURES COMPANY LLC
      Attention: Garrett Smart
      Address: P O BOX 2278
      City, State: SEAL BEACH, CA 90740
      Phone: 714/823-3000
      Email: garrett.smart@thestructurescompany.com
      Website: www.thestructurescompany.com

      Product Review Engineer 3

      Description:
      Chipton-Ross is seeking a Product Review Engineer 3 located in Heath, OH.

      RESPONSIBILITIES:
      Applies knowledge of Client design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with Client standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

      Apply knowledge of Client design principles to assess and resolve product/process issues through the product lifecycle
      Analyze, conduct root cause analysis and develops dispositions for design non-conformances
      Apply engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
      Identify documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution
      Develop and implement product/process improvements
      Support Integrated Product Teams (IPT) and participates in design reviews
      Represent the engineering community in the build through post production environment
      Ensure supplier and build partner compliance with Client standards
      Develop customer correspondence for continued safe operation and maintenance of equipment
      Participate in on-site disabled product repair teams and accident investigation or support team
      Analyze damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment
      Develop non-destructive test procedures, tools and standards

      REQUIRED EXPERIENCE:
      Bachelor's, Master's or Doctorate of Science deg