Job Search Results

648 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 09:42AM Pacific Time by ContractJobHunter. )

Listings 1 - 648

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Requirements:

Looking for someone with at least 2 years of primary composite Stress Analysis experience.
Extensive experience developing and running finite element internal loads models.
Extensive experience calculating strength and updating Global FEM properties
Experience with full scale static testing is a plus.
Must have experience with FEA/FEM tools like Nastran, Patran, or FEMAP.
Writing certification reports is a plus
Experience with light aircraft a plus. Experience with larger aircraft is ok as long as the experience was with composite structure.
Experience and a high level of comfort working in undefined environment and ability to work without direction.


Job description:

This is a Senior-Level stress analyst position in the Aerostructures Engineering Organization. General responsibilities include leading and coordinating the stress activities within an assigned project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with program requirements.


The ideal candidate for the Senior Airframe Stress Analyst will possess the following skills and experience:
Act as the first level of authority within the team for technical approval and exercise latitude in determining technical objectives of programs.
Must have a thorough working knowledge of the design of flight vehicles or vehicle systems to a set of requirements or standards such as 14 CFR Part 23 and Part 25, MIL-HDBK-516C, or NASA Procedural Requirements as they relate to certification of airframe structures.
Leveraging diversified knowledge and engineering experience, provide directions and coordinate work within the assigned analysts and actively participate in daily operations as required to meet schedules and resolve issues.
Work with inter-disciplinary teams such as Design, Loads, Materials & Processes and Manufacturing groups to provide solutions to mitigate form, fit, function, producibility, and maintainability aspects of airframe structural designs.
Excellent verbal and written communication skills, including strong interpersonal and communication skills in dealing with program management and customers.
Demonstrate proficiency in FEA tools.


Responsibilities:
Create appropriate engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
Select appropriate material systems for structures applications and identify all material testing requirements.
Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.
Mentor, coach and motivate the stress team members in every way possible.


Minimum Requirements (education and experience):
4 year engineering degree from an accredited university (BS in Mechanical Engineering, Aerospace Engineering or similar)
8+ years of applicable experience with a Master degree or 10+ years of applicable experience with a Bachelor degree
Demonstrated ability to use Microsoft Excel, Word and Powerpoint


The Structures Company is an AA/EOE.
 
Job Number: 243
Job Location: VA
Rate: $80-$85/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2531 - CABIN SYSTEMS ENGINEER - cv, word only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Working experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Strong knowledge of Commercial Aircraft interior cabin systems including in-flight entertainment system and connectivity network.
 
Job Number: 2531
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2533 - LIAISON ENGINEERING - CABINETS - cv, word doc only

Description:
Coordinate activities to evaluate and resolve engineering-related production problems encountered in assigned area of aircraft cabinet manufacturing facility or from suppliers. Review engineering specifications, orders and related information to maintain current knowledge of manufacturing methods, procedures and activities in assigned area or from suppliers.

Teamwork with quality control, material, manufacturing, logistic, method and other department personal to provide technical support.

Interprets engineering drawings and facilitates correction of errors on drawings and document identified during manufacturing operations.

Investigate reports of defects, damaged or malfunctioning parts or assemblies to determine nature and scope of problem.

Maintains records or oversees recording of information related to qualification/certification of parts/assemblies from external suppliers to ensure engineering drawings requirement and documents are well document and the product conform to all engineering drawing requirement.

Bachelor Degree in Mechanical Engineering with minimum 2 years of relevant experience.

Knowledgeable in 3D/2D Design with Catia V5.

Good communication skills including good English and French writing and verbal skills.

Team Player, working in a multi-disciplinary team

Customer-oriented with innovative problem solving skills and organized.

Autonomous, Flexible and orient toward result via your project management skill.

Design Experience in cabinet assembly, manufacturing design or cabinet installation.
 
Job Number: 2533
Job Location: Mirabel, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2535 - PROGRAM ANALYST - CHNG. MGMNT - cv, word doc only

Description:
Understand aircraft component assembly and manufacturing strategies as well as the impact on program strategies.

Identify the key risks of the project, including mitigation / reduction strategies.

Harmonize the implementation of engineering changes or assembly strategy by working closely with engineering, material logistics, quality and production departments.

Ensure a flawless implementation of change management on the production line.

Develop and implement targets and monitoring mechanisms to track performance and progress, prepare status reports and modify timelines and schedules as required.

Influencing (leadership) the day-to-day multidisciplinary team towards the achievement of program objectives.

Climb to the appropriate level of management when required.

Bachelor Degree in mechanical engineering, avionics, electrical, industrial, or electromechanical, in aeronautical manufacturing or in a related discipline.

Have experience in the aeronautical industry.

Have more than five (5) years of relevant experience.

Have initiative, are result-oriented and have the desire to make decisions.

Have strong leadership skills, as well as strong analytical, planning and problem solving skills.

Have excellent communication skills (written and spoken) and are able to influence at different levels of the organization.

Are able to work under pressure with tight deadlines while delivering quality results.

Are using the MS Office suite effectively (Word, Excel, PowerPoint, and Project).

Are fluent in English and French, both written and spoken.
 
Job Number: 2535
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
STS Technical Services is Hiring A&P Mechanics in Brownsville, Texas!

Summary:

Reports to the Lead Mechanic and is responsible to the Director of Maintenance and Maintenance Manager for the safe, efficient, and economical performance of all assigned maintenance duties. Their primary responsibility is the monitoring and oversight of all maintenance activities performed on the company aircraft.

Mechanics do not primarily function in a supervisory capacity, but may be used in that function. In some instances they may be utilized as designated Inspectors when and where the company may require that service or specialty. Mechanics when trained and qualified to perform the duties of a designated Inspector, will report to the Director of Quality while in that role. During maintenance and repairs of company aircraft and related equipment the Mechanics have responsibility and authority for the following...

Job Duties:

Perform all assigned maintenance duties in accordance with the company GMM
Responsible and accountable for all work performed
Ensure proper completion of all forms on all work assigned and performed
Ensure proper handling of all parts, units, assemblies, and aircraft while in the repair process
Ensure that all documentation is kept current as to open discrepancies and completed corrective actions
Ensure the adequacy, correctness, and completion of all associated and required documentation for all maintenance work performed, or inspections conducted
Maintain the work area in a safe, clean, and operative condition and ensuring all tools are accounted for at completion of all assigned tasks
Responsible for tooling and equipment used for aircraft maintenance
Responsible for professional conduct at all times
Mechanics that have been authorized to perform Required Inspection Item (Rll) must perform those inspections in accordance with Chapter 12 of this manual. He will not perform an inspection on any work which he has accomplished himself. He will report directly to the Manager of Quality during the time he is performing Rll's
The Quality Manager will maintain a list of all personnel with Rll authority
Each mechanic must immediately notify the Lead Mechanic, Maintenance Manager and all other appropriate personnel of any condition that would compromise the airworthiness of company aircraft
Maintain a valid Airframe and/or Powerplant Certificate (Note: The mechanic must be properly rated for any work which he is approving for return to service)
Perform other duties and tasks as assigned by the Lead Mechanic and / or Maintenance Manager
Endeavor to increase own knowledge by reference and studying technical material and study charts provided for that purpose
Understand the current instructions of the manufacturer
Monitor assigned vendor/contract personnel follow company policies and procedures which may apply during a company aircraft maintenance visit for overnight, daily or other heavier maintenance services
Maintaining the company standard of quality and quantity of work produced
Compliance with company policies, and rules of conduct
Compliance with company and manufacturer’s procedures, applicable Federal Aviation Regulations, and accepted industry practices
The Mechanic will maintain an adequate supply of commonly used hand tools
Responsible for the control, revision and protection of company manuals and their content
Monitor aircraft maintenance logbook for any open DMI's (MEL, CDL, NEF) or restrictive items
Coordinate with the Maintenance Control and Flight Operations on the status of inbound aircraft
Advise Maintenance Control of progress and current status of all maintenance
Perform other duties as assigned by the Maintenance Manager or DOM

Job Requirements:

Hold a valid FAA Mechanics' Certification with Airframe and Powerplant rating with Airworthiness
release Authorization
Must have at least 3 years' experience at a commercial MRO facility
Must meet requirements set forth in Chapter 2, section 2 of this Manual
Must have company formal classroom training to include, DC-9 / MD-80 Familiarization Training. (Prior formal DC-9 / MD-80 Familiarization Training may be accepted by the DOQ)

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44217
Job Location: Brownsville, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
STS Technical Services is hiring A&P Mechanics in San Antonio, Texas.

Responsible for Mechanical maintenance and repair on Commercial aircraft types.

Essential Duties:

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner
Perform the duties of and provide necessary training for lower skill levels
Maintain and store various tools in a serviceable condition
Adhere to safe maintenance practices and keep a clean work area
Maintain and supply personal records of work performed on OJT forms for the Training Department
Successfully complete any courses deemed necessary by the Training Department
Perform any work that may be assigned by his or her supervisor.

Job Specifications:

Proficient working knowledge of the following skills: Safety wiring, engine servicing, engine CSD servicing, tire inflation, A/C wash rack/ cleaning procedures, A/C lube procedures, hydraulic pressurization/ depressurization, wing walker/ aircraft towing, A/C marshalling, Torque wrench values/ operation, basic safety procedures, engine cowling opening, Lab/ portable water flushing/ servicing, interior seat installation, nose radome removal/ install, application of external power, stairs/ entry door operation, APU servicing cargo door operation, jack operator, fuel tank entry procedures, operation of reader printers/ IPC, electrical HOBART, HUFFER, water service cart, general knowledge of all applicable F.A.R.’s and company policies and procedures, familiar with all paperwork procedures including job cards/ time cards, routine/ non-routine cards, S.R.M.’s, service bulletins, and work sign-off/ sell-off procedures.

Job Qualifications:

1 – 2 years’ experience preferred in heavy commercial maintenance
High school diploma or GED required
A&P License desired or specialized training

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45328
Job Location: San Antonio, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ASIR Test Engineer

Description:
We are seeking a Test Conductor/Test Engineer for our Avionics System Integration Rig (ASIR). This position is located in Seattle, WA and you will be working with a new exciting aviation project. The test rig is a static test bench for all of the Avionics Systems on a new regional jet aircraft with a simulation host computer to stimulate the systems. This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.


Responsibilities:
•Development and test of Engineering Test Procedures (Test Cards) using in house tools.

•Creation of Test Reports following the tests to document the results.

•Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

•Support the Configuration Management of the Test Rig.

•Facilities planning.

•Creation and carrying out of Rig Maintenance Procedures,

•Test Video Recording & Equipment management.

•Software Loading following provided instructions.



Requirements
•Candidates should have experience conducting systems testing on a test bench or static simulator.

•Engineering degree of relevant experience.

•Avionics experience.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / airframe structural design engineer / Catia V5 - Clearance CA

Description:
1318-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 1/21/2019
End Date: 1/21/2020

Job Description:
This position is for an airframe structural design engineer for the U-2 program in Palmdale, CA. A successful candidate will apply extensive technical expertise to develop solutions to aircraft structural design problems and investigate and disposition non-conforming parts and assemblies on-site and in the field. This position will require a successful applicant to work without appreciable direction and exercise considerable latitude in determining technical objectives and approaches for a design task.

Responsibilities for this position include:

• Development, test, and validation of aircraft structural designs.
• Creating or modifying 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work.
• Creating system requirements, trade studies, sub-component and flight test plans.
• Coordinating with suppliers, internal and external integrated product teams.
• Providing manufacturing, component test and ground/flight test support.
• Investigating and determining root cause and recommending corrective actions for component failures.
• Serving as the prime technical contact for airframe structure and repair.
• May function in a project leadership role managing the system performance, budget and schedule.

CNE Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Skills:
Areas of Expertise CATIA Yes 2 6 + Years
Areas of Expertise Design Yes 1 6 + Years
 
Job Number: JE-1318-1S
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

•​Review and support Avionics Certification Activities.

•Create and review Certification Plans.

•Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.

•Review qualification by similarity and/or analysis reports.

•Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).

•Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.

•Perform Component Drawing Reviews.

•Complete aircraft assembly and installation drawing reviews.

•Participate in System Design Reviews.

•Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.

•Coordinate with certification authorities to seek clarification on requirements.

•Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.

•Create, review and approve interface control documents and any sub level writing interface documents.

•Support Avionics Flight Testing Activities, including but not limited to:

•Discuss, write and review test plans and preparation activities with flight test team.

•Help prepare and review pre and post flight briefing.

•Monitor live flight data, typically via telemetry, during flight test on aircraft.

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety pf flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate limitations documentation.

•Complete special projects and tasks assigned by Group Lead.






Requirements

Knowledge/Skills/Abilities

•Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).

•Good leadership presence as well as people management skills:

•Future-oriented in thinking and operation.

•Able to lead by example and live/work by company values.

•Ability to successfully contribute to a positive and productive work environment.

•Able to in still a sense of urgency in team members.

•Able to be patient and objective in difficult situations with different types of people.

•Strong customer service tool box:

•Professional mannerisms, appearance and actions (self-confident and committed to high ethics).

•Strong follow-through, quick thinking and resourceful.

•Ability to remain calm, cool and collected in stressful situations.

•Strong sense of urgency to resolve customer needs.

•Strong organizational, time management and prioritization skills:

•Able to multi-task, maintain focus on several different projects at one time and hit deadlines.

•Able to be flexible with attention and priority.

•Ability to work in a progressive, fast-paced environment (work well under pressure).

•Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.

•Strong communication skills (oral, written, presentation) with both external and internal customers.

•Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

•Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.

•Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.

•Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.

•Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.

•Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.

•Proven track record of improving the efficiency of assigned processes or procedures.


Education

•Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).

•Other Engineering fields may be considered.


Experience

•Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Instrumentation Design Engineer

Description:
PDS is seeking an Instrumentation Design Engineer for an open position in Wichita, KS.
In your role, you will:

Design, verify, support, and troubleshoot measurement and data systems for flight test vehicles
Create and maintain wiring diagrams for flight test equipment and systems
Document procedures, calibrations, and special instructions to support flight test activities
As our ideal candidate,

You must have a BS degree in Electrical Engineering or Electronic Engineering Technology
You have experience with airborne acquisition systems, including L3, TTC, or Acra (preferred)
You have knowledge of strain gages, telemetry, PCM systems, networking, video and audio systems, wiring diagram drafting, calibrations, and laboratory equipment (preferred)
You have flight test experience (preferred)
 
Job Number: 1910097919
Job Location: Wichita, Ks
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is Hiring Aircraft Painters in Greensboro, North Carolina.

Signing Bonus: $1000

Taxable Signing Bonus tied to the contractor staying 6 months

Qualifications:

Must have 8-11 years of experience as an aircraft painter

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37280
Job Location: Greensboro, NC
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Engineer - CATIA V5 - Los Angeles

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.

Our client in the Los Angeles area is looking for a CATIA V5 structural design engineer to work on a freighter conversion. Airbus experience and modifications to aircraft structure relative to cargo doors area and cargo handling systems is also desired.

Please describe your experience in detal with CATIA v5, emphasizing when it was last used for design, modeling, and drawing, and how it applies to Primary Structures.
 
Job Number: Keltia111417
Job Location: Los Angeles, CA
Rate: 50-55/hr
Per Diem: possible
Overtime: No
Duration: 6mo +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Design Engineer

Description:
Location: Palmdale, CA
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- This position is for an airframe structural design engineer for the U-2 program in Palmdale, CA.
- A successful candidate will apply extensive technical expertise to develop solutions to aircraft structural design problems and investigate and disposition non-conforming parts and assemblies on-site and in the field.
- This position will require a successful applicant to work without appreciable direction and exercise considerable latitude in determining technical objectives and approaches for a design task.

Responsibilities for this position include:
- Development, test, and validation of aircraft structural designs.
- Creating or modifying 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work.
- Creating system requirements, trade studies, sub-component and flight test plans.
- Coordinating with suppliers, internal and external integrated product teams.
- Providing manufacturing, component test and ground/flight test support.
- Investigating and determining root cause and recommending corrective actions for component failures.
- Serving as the prime technical contact for airframe structure and repair.
- May function in a project leadership role managing the system performance, budget and schedule.

Education:
- Bachelor's Degree required.
- 6+ years of design experience with CATIA.
- MUST have an Active Secret Clearance or to have had one within the last two (2) years.
 
Job Number: 10296
Job Location: Palmdale, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic System Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.

Duties and Responsibilities:
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• DO-160F/G, DO-178B and DO-254 experience required.
• Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 10 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in requirements management tools such as DOORS
• Experience with PLM Tools such as TeamCenter and SAP

The Structures Company is an AA/EOE.
 
Job Number: 253
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Wire Harness Design & Manufacturing Engineer

Description:
Seeking an experienced and talented Avionics Wire Harness Design & Manufacturing Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; wire harnesses; LRU design, & instrumentation. The ideal candidate will have at least 4 years of experience working with electrical harness design, electrical harness manufacturing, & vehicle integration.

Qualifications/Requirements:
• Produce wire harness assembly (formboard) drawings
• Produce wire harness manufacturing instructions
• Produce wire harness termination drawings
• Strong understanding of wire harness manufacturing process and formboard drawings
• Strong understanding of electrical schematics & termination drawings
• Experience working with electrical designers during schematic creation
• Experience integrating wire harnesses in vehicle
• Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
• Catia V5 Electrical Workbench is a plus
• Experience with Mentor Graphics is a plus
• Experience with composites is a plus
• Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 262
Job Location: CA
Rate: **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Design Engineer

Description:
Seeking an Avionics/Electrical Design Engineer.The ideal candidate will have at least 4 years of experience working with avionics and electrical systems design. The scope of the avionics/electrical design engineering position includes: Avionics and electrical system integration and design; wire harness design; electrical load analysis and sizing; electrical component selection.

Knowledge/Experience
• Avionics systems
• EWIS & SAE AS50881
• Schematic Drawings
• Electrical Load Analysis

Responsibilities
• Aircraft electrical system design and component selection
• System integration design for avionics equipment in aircraft/spacecraft including preparation of schematics and wiring harness drawings
• Responsible for the technical performance of the avionics system
• Develop solutions to address avionics obsolescence

Educational Requirements:
Must have a B.Sc. Electrical Engineering degree from an accredited university

Professional Requirements:
• 4 or more years of relevant avionics engineering experience on development aircraft and/or spacecraft
• Strong troubleshooting, organizational, and written communication skills
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 271
Job Location: CA
Rate: $70+/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist 1st and 3rd Shift- Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team. This is a weekend/night shift of 3 twelve hour shifts with pay for 40 hours.
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Our client is looking for a Certification Engineer to work in Greenville, South Carolina! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Responsible for providing Certification Engineering related to an avionics design in support of a CNS/ATM upgrade on a C-130H aircraft.
* Develop, compile, and/or coordinate internal and external resources to assist in the development of data to support the “Certification” activities with items such as Project Specific Certification Plans, Conformity Inspection Plans, Test Plans, Test Reports, Instructions for Continued Airworthiness, EWIS Zonal Analysis, Functional Hazard Assessments, System Safety Assessments, and Request for Conformities for STC data packages

Mandatory Qualifications and Experience:
* Bachelor's Degree in an engineering discipline related to Aerospace Certification with at least 7 years of certification experience.
* A demonstrated and extensive understanding of aircraft engineering and certification functions, procedures, standards and methods.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129606
Job Location: Greenville, SC
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker - Mechanical 2D & 3D

Description:
Required Check 2D engineering data and 3D models for conformance to company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.

Review all current positions posted at www.hi-tecsolutions.com/jobs
 
Job Number: 142810
Job Location: Savannah, GA
Rate: 53.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-336
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-321
Job Location: Savannah, GA
Rate: $55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
 
Job Number: 24-314
Job Location: Savannah, GA
Rate: $54.66
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer - TS I

Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Required The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior. Actively develop engineering product improvements. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

MUST BE A U.S.CITIZEN OR PERMANENT RESIDENT
 
Job Number: 142471
Job Location: Savannah, GA
Rate: $ 55.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager / Test Aircraft Manager

Description:
The Configuration / Test Aircraft Manager is responsible for managing test aircraft by prioritizing, documenting and controlling all configuration changes, maintenance or inspection requirements, technical directives compliance, parts removals/installs, and engine or sub-system modifications.

The successful candidate will be assigned to the CRH Flight Test Program in West Palm Beach and Fort Walton Beach, Florida. Note: could be 1st or 2nd shift.

Job Requirements:
• Manage the configuration of the test aircraft ensuring all configuration changes are documented in the appropriate system/tool.
• Provide direction and work instructions for Operations to complete the work on the aircraft.
• Coordinate with the various departments e.g. Test Director, Operations, Pilots, Safety, etc. to ensure aircraft is configured and ready to test.
• Support and implement process improvements within the aircraft management department and the site.

Educational Requirements:
• Bachelors’ degree from an accredited college in a related discipline with 3 years of professional experience, or equivalent experience/combined education.
• Masters’ degree from an accredited college in a related discipline 2 years of professional experience.
• Considered career, or journey, level.

Skills/Experience Required:
• Candidate must be a high performer
• Previous aviation/helicopter flight line experience
• Must be customer focused and a team player
• Must be self-motivated and goal oriented
• Must possess excellent verbal & written communication skills for use at all levels of the organization such as employees, management and internal/external customers
• Proficient in Microsoft products specifically Excel and Project

Additional Information:
• The assignment will be on 1st shift.
• Must be a US citizen.
• Must currently have and/or be capable of obtaining a security clearance.
• Must have valid driver's license/vehicle insurance to drive on base.
 
Job Number: 2010111152
Job Location: West Palm Beach, FL
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Fatigue and Damage Tolerance Engineer

Description:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 19-143023
Job Location: Southeast
Rate: Up to $80.00 per hour
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Autocad Aircraft Interiors Design
 
Job Number: 7
Job Location: Mid West or South East
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Door Design Engineers - Many Needed

Description:
• Minimum 5 years aircraft structure and/or mechanical system design experience
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• Strong mechanical aptitude
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Project experience is desired.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit)
• Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design;
• ASME Y14.5 Geometric Dimensioning and Tolerancing fluent
• Pilot’s license, A&P rating and/or applicable hands on aircraft experience are also desirable but not required

Email resume: mmccarthy@pdstech.com
 
Job Number: Door-Tex
Job Location: Wichita, KS
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Ice Protection Design Engineers - Many Needed

Description:
• 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• General knowledge of Cessna engineering tools strongly preferred (PIOS/EEDS/Enovia V6)
• Strong mechanical aptitude
• Demonstrated ability to collaborate with multiple support functions (engineering – all disciplines, manufacturing, customer support, integrated operations, procurement, supply chain)
• Experience with Microsoft Office Word, Excel, PowerPoint are required.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design

Email resume to: mmccarthy@pdstech.com
 
Job Number: ECS-Tex
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann Mc
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING INSTRUMENTATION STRAIN GAGE TECHNICIAN

Description:
Engineering Instrumentation Strain Gage Technician

Stratford, CT

15+ Months Contract Opportunity

Perform strain gage installations required to support ongoing Engineering Flight and Ground test operations.

Must have knowledge of strain gage bridge wiring methodology.
Must be able to apply gages to aircraft and facility components manufactured from of a variety of metals and composites making them Load Measuring Sensors.
Must have experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding.
Must have experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
 
Job Number: 367119
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Our client is in need of an Electrical Engineer with integration and test experience. If you have the skill set listed below, do not hesitate to apply today!

The ideal candidate for this position will perform the following tasks:
* Responsible for providing electrical engineering support to integration and test of a CNS/ATM upgrade on a C-130H aircraft. This includes defining system requirements to verify hardware requirements, designing the Group A installation, supporting production and development test activities, and troubleshooting production and test failures.

Mandatory Qualifications and Experience:
* Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design is required.
* Must be experienced with CADDAM design software for electrical design is required.
* Ability to understand schematics, generate interconnect diagrams and troubleshoot hardware is required.
* Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
* Must be U.S. citizen
* Experience with aircraft architectures and electrical integration of avionics subsystems.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129605
Job Location: Greenville, SC
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Test Engineer (Active secret clearance)

Description:
• Develop, revise, review, and release engineering drawings.
• Develop functional test procedures for aircraft LRU and SRU repairs.
• Capable of operating various test equipment such as Oscilloscopes, Digital Multi-Meters, Functional Generators, Spectrum Analyzers, Power Meters, etc.
• Ability to troubleshoot and solve mission communication system problems with fielded hardware installed on the aircraft.
• Develops and documents moderately complex electronic and electrical system requirements. Tests and validates to ensure system designs meet operational and functional requirements.
• Assists in monitoring supplier performance to ensure system integration and compliance with requirements. Researches specific technology advances for potential application.

Education/Experience:Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, com
 
Job Number: ESDAOK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FLIGHT SUPPORT OPERATION

Description:
JSG is looking for a Flight Support Operation for a 15+ months contract in Pax River, MD!

Perform a variety of tasks involving day-to-day flight operations administrative activities supporting Flight Operations.

Job Duties/Responsibilities:

Working with various centralized groups on a variety of issues such as flight crew availability, aircraft scheduling and daily schedule preparation and tracking.
Prepares daily flight schedule and DCMA Form 644.
Coordinates with flight test directors and test pilots to build short and long term “look-ahead” planning of resources.
Coordinates with US Navy personnel to obtain flight and aircrew approvals as well as US Gov’t assets.
Maintains pilot flight records per current FTOP and US Gov’t procedures ensuring contractual adherence.
Exercise independent judgment in reacting to unanticipated situations within policies, the Director of Flight Operations, Manager of Flight Operations and others.

Experience/Qualifications:

Bachelor’s Degree in Aviation Administration or equivalent demonstrated work experience.
Other combinations of experience and education may be considered.
Experience in airport administration activities or a professional aviation position – Highly Preferred
Prior experience/knowledge of US Navy Base operations – Highly Desired
Candidate must have strong analytical skills and be highly detail-oriented.
Must have excellent oral and written communication skills • Ability to work with minimum supervision and interface effectively with internal and external customers
Proficiency with MS Office/Window applications/databases Required.
Must be able to obtain US Military Common Access Card.
 
Job Number: 367419
Job Location: PAX RIVER, MD.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue & Damage Tolerance Eng

Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience.
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 143023
Job Location: Savannah, GA
Rate: 75.00 -80.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Fatigue and Damage Tolerance Engineer has experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.





Fatigue and Damage Tolerance Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10399
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineers

Description:
B.S. Degree
Experience with Catia V5 or V6
Responsible for completing assignments in the design and development of aircraft flight controls and hydraulic systems.
 
Job Number: Flight-KS
Job Location: Wichita, KS
Rate: 55.00-60.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer

Description:
We are seeking a Flight Sciences Engineers for an exciting new aircraft project here in Moses Lake, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.





Roles
•Define and validate flight test specifications

•Perform data review and analysis for verification of aircraft level requirements

•Utilize flight simulation models and data

•Support ground and flight test activities

•Prepare flight test reports



Requirements
•Experience with FAA Part 25 or Part 23 aircraft certification

•Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.

•Ability to represent the client professionally and positively during client interactions and meetings.

•Bachelor or advanced degree in Aerospace Engineering.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Electrical Systems Specialist

Description:
DS is seeking a Flight Test Electrical Systems Specialist for an open position in Wichita, KS.

In your role, you will:

Define electrical system requirements and manage system suppliers to ensure they meet their technical obligations
Integrate electrical systems or modifications onto the airplane
Create and review engineering documentation for design changes, both in a design/certification and in a flight test environment
Provide system performance analysis to ensure proper operation as per the design specification
Support design/certification activity remotely & in a cross-functional team environment.
Write and review certification plans
Write development and certification test procedures and reports
Assist technicians in troubleshooting aircraft system problems
Write and analyze Problem Reports
Write and review Compliance Reports
Plot and analyze ground and flight test data
You must have a Bachelor’s Degree in Electrical Engineering (Or Equivalent degree) with a minimum of 10 years’ experience in AC & DC electrical power systems design and certification OR a minimum of 12 years’ experience if no degree
You have previous experience with missionized equipment and provisions, either at an OEM or system supplier-level (preferred)
You must have a good working knowledge of FAA Part 25 certification requirements
You have a working knowledge 270Vdc electrical systems (preferred)
You must have experience of performing electrical load analysis
You have a working knowledge of System Safety practices (preferred)
 
Job Number: 1910097921
Job Location: Wichita, Ks
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel System Designer (Entry Level)

Description:
General Summary:

The Entry-Level Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree in an engineering related discipline
• Minimum of 3 years of previous design experience

Knowledge, Skills and Abilities:
• Experience with Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards

The Structures Company is an AA/EOE.
 
Job Number: 257
Job Location: NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Group Leader

Description:
We are seeking a Interior Group Leader to lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for and exciting new aircraft project here in Seattle, WA. Business trips to required sites may be requested, including Nagoya, Japan and Moses Lake where engineering tasks.


Responsibilities:
•The employee will work as the Group Leader for the Interior Team within the Interiors Office in Seattle. Leadership activities include, but not limited to:

•Lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for aircraft.

•Promote and ensure personnel performance from the Seattle Office, while influencing the Nagoya Team performance where practical.

•Manage team objectives and Goal setting, and adopt and support company Performance Measurement tools when available.

•Promote and ensure team integration in Seattle office and with other IPT’s.

•Drive and promote Integration activities between Nagoya and Seattle teams.

•Remove roadblocks and provide solutions to both technical and managerial challenges.

•Ensure processes are followed. Champion tool and process improvements to increase team efficiency where necessary.

•Support task prioritization and achieving deliverables. Provide adequate distribution of workload to ensure projects are completed timely.

•Communicate and Escalate to Seattle/Nagoya Leadership as appropriate.

•Balance and Identify Resource gaps to enable on time delivery of aircraft deliverable’s. Support and drive resource gap closure.

•Support reporting key metrics to management and Program Managers to ensure correct visibility is given to key issue

•Provide Technical direction to the team to enable development and finalize T/C design, compliant to all applicable requirements. This activity includes, but not limited to:

•Evaluating the current aircraft design, with respect to compliance to the Interiors commodities and related airworthiness regulations of JCAB, FAA and EASA.

•Conduct design review of interior components,

•Coordinate with system suppliers for the design, certification, and development schedule.

•Create and/or review qualification test plans for interiors commodities.

•Review certification plan for Interiors commodities,

•Managing schedule of design and certification activities for Interior commodities, with related personnel.



Requirements
•Minimum 15 years Engineering Experience with at least 10 years in the Aerospace/Aircraft industry, with a high preference for Commercial Aircraft Cabin Interiors.

•Equipment Qualification and Cabin Certification experience is mandatory.

•Demonstrated people leadership experience, managing teams of 50+. Ability for focus on key deliverables and find solutions to problems, and while guiding the team forward.

•Must be culturally sensitive, with preference of previous working experience within a Japanese working environment.

•Experience managing Aerospace Supply Chains under pressure and hitting tight deadlines, with exposure to commercial negotiations and contracts preferred.

•Must be flexible with working hours to support Japanese working time zone.

•Ability to work and reside full time in Seattle, USA mandatory.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design I (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
•Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-298
Job Location: Long Beach, CA
Rate: $51-$56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interiors Project Engineer

Description:
We are seeking a Interiors Project Engineer for an exciting new aircraft project here in Seattle, WA. The Project Engineer will work and support activities within the Cabin Safety Interior System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain Information of any task assigned contributing to the aircraft and Interior System development and Certification.

•Establish and track KPIs that highlight bottlenecks.

•Identify performance concerns against a plan.

•Maintain risks & opportunity register on Sharepoint.

•Resource plan monitoring loading.

•Provide support to PM /GL tasks as necessary.

•Support Microsoft Project updates and weekly reports.

•Preparation of material and facilities for engineering meetings.

•Governance reporting work for PMO/EMO, daily/ weekly/monthly.

•Chase stakeholders and hold accountable for information’s provided.

•Keep JCAB test schedule topical for CMO before submission.

•Prep IPT PM reviews.

•Support budget planning and tracking.

•The primary work locations will be in either Seattle, WA or Nagoya, Japan. However, engineers maybe requested to travel to support business needs as requested.



Requirements
•+5 years of aerospace project experience, with aircraft interiors knowledge preferred.

•Fluent in English, with Japanese language skills desirable.

•Good computer skills (MS Word, Excel, Power Point, Microsoft Project).

•Attention to detail and organized.

•Ability to interact respectfully with others.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
LEAD SYSTEM ENGINEER

Description:
JSG is hiring for a Lead System Engineer for a 15+ months contract opportunity in Startford, CT!

Description:

Seeking a System Engineer for assignment to the Canadian Maritime Helicopter Program (CMHP). The responsibilities of the System Engineer will include, but are not limited to: Requirements Management, Risk Management, System Integration and Issue Resolution, Verification Planning, Trade Study activities and Technical Review coordination in support of their assigned platform. The candidate will be selected and assigned based on their specific skills and/or experience in any one of the above listed areas.

Requirements Management will include the analysis, decomposition and allocation of high-level requirements.

Requirements management is performed using the DOORS database application. Experience and proficiency with the requirements management tool DOORS is required.

Risk management will include risk identification, risk assessment and risk mitigation plan definition of system level risks on the assigned platform.

System integration activities will include participating in the resolution and clarification of inter-segment and inter-IPT requirements and responsibilities. Once problem areas are identified, the system engineer will assist in refining, clarifying and communicating the necessary requirements as needed to resolve these concerns.

This job requires an understanding of the operation and interrelationships of aircraft systems; an appreciation for the impact that configuration changes may have on performance related attributes, cost and schedule.
BS degree in an engineering discipline is required.
7+ years of experience in system engineering, design or the analysis, of helicopter systems and technologies is desired.
 
Job Number: 367140
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lean Manufacturing Expert - Aerospace - China

Description:
Leading Chinese aerospace organisation are seeking Lean Manufacturing Expert to work within their modern aircraft manufacturing facility to be responsible for the planning and implementing a lean manufacturing & improvement plan. Responsibilities include:

Planning, implementation, monitoring, improvement of the company's lean manufacturing overall plan.
Lean improvement of production site, optimization of production process, coordination of various production lines and functional departments, and realization of lean strategy for cost reduction and efficiency;
Cultivate and train the company's lean manufacturing team.
You will have implemented lean manufacturing strategies within the aerospace industry taking responsibility for large projects, ideally within aircraft manufacture, with an understanding of the latest intelligent manufacturing methods. You will be degree qualified (or above) and preferably be Six Sigma qualified, ideally certified Black Belt.


The position is based in Shanghai and will be an initial 2-3 year fixed-term employment contract comprising an attractive basic salary with generous allowances for accommodation, local transport, home leave and medical cover available.
 
Job Number: JO0000000209
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: April 2019 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Electrical Systems

Description:
• Assesses and resolves product/process issues through the product lifecycle.
• Support daily production, completions and delivery operations
• Assist with production, quality and the customer; provide engineering with dispositions of Material Review Board/concessionary requests & resolution of query’s raised on all assigned projects
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances
• Work in close cooperation with other engineering disciplines to achieve the company’s business objectives.
• Maintain a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy and effectiveness of company products
• Develops and implements product/process improvements
• Recommend new processes where needed for quality improvement, cost reduction and on-time delivery.
 
Job Number: 18-819
Job Location: Northeast
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Interiors

Description:
Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
 
Job Number: 19-142471
Job Location: Southeast
Rate: $54.50
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst

Fort Worth, TX
$33.60/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
In General, controls the efficient flow of goods, services, and information between points of origin to final destination in order to meet internal/external customer requirements. Ensures that customer service and time objectives are achieved within existing constraints in order to meet program objectives. Ensures the execution and continuous improvement of standard logistics processes, electronic data systems utilization/data integrity, and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, operating entities, distribution, transportation, customer service, and training for continuous improvement.

Specifically, perform L&TS Hardware Labs team operational logistic activities and coordination of simulation/test equipment, computer systems, electronic parts, non-electronic parts, and Aircraft PME as required. Coordination with procurement team on Material requirements for lab parts receiving including update of labs parts status, and parts tracking, as well as coordination with transportation outlets to ensure parts reach their appropriate destinations. Also, RF ID tagging of equipment as required, perform Parts/Equipment Salvage efforts, and coordinate/support Lab Tools Calibration activity with Metrology. Tasks also include packing/unpacking, lifting, moving, staging, shipping, receiving, and database tracking of Lab Hardware parts deliveries and coordination with LM internal transportation and external shipping vendors as required. Position requires a demonstrated ability to perform operational logistics tasks and parts receiving analysis related tasks as well as experience with computer applications involving spreadsheets and/or databases.

-Bachelors required
 
Job Number: 10332
Job Location: Fort Worth, TX
Rate: 33.60
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163996
1332-1 Logistics Management Analyst

Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/30/2019
End Date: 1/31/2020

Job Description:
In General, controls the efficient flow of goods, services, and information between points of origin to final destination in order to meet internal/external customer requirements. Ensures that customer service and time objectives are achieved within existing constraints in order to meet program objectives. Ensures the execution and continuous improvement of standard logistics processes, electronic data systems utilization/data integrity, and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, operating entities, distribution, transportation, customer service, and training for continuous improvement.

Specifically, perform L&TS Hardware Labs team operational logistic activities and coordination of simulation/test equipment, computer systems, electronic parts, non-electronic parts, and Aircraft PME as required. Coordination with procurement team on Material requirements for lab parts receiving including update of labs parts status, and parts tracking, as well as coordination with transportation outlets to ensure parts reach their appropriate destinations. Also, RF ID tagging of equipment as required, perform Parts/Equipment Salvage efforts, and coordinate/support Lab Tools Calibration activity with Metrology. Tasks also include packing/unpacking, lifting, moving, staging, shipping, receiving, and database tracking of Lab Hardware parts deliveries and coordination with LM internal transportation and external shipping vendors as required. Position requires a demonstrated ability to perform operational logistics tasks and parts receiving analysis related tasks as well as experience with computer applications involving spreadsheets and/or databases.

Region: Fort Worth, TX
Level: Level 1: BS+0-3 YRS
Pay Rate: $32.00 Hourly


Areas of Expertise Logistics Yes 1 1 - 2 Years
 
Job Number: JE-1332-1
Job Location: Fort Worth, TX
Rate: 32/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Systems or Structures

Description:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems

Duties and Responsibilities:
• Resolves complex engineering problems related to the build of the aircraft
• Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required
• Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working
• Reviews, develops, and implements revised/new processes using six sigma/lean principles
• Provides an acceptable disposition of non-conformance of commercial mechanical systems or structures encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects
• Documents how to repair the discrepancy using engineering principles
• Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings
• Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality
• Incorporate design changes using CATIA V5

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelor's degree in Engineering or related field of study
• 6 years’ experience serving as a Liaison for MRB Structures is required
• Computer proficient with experience in Microsoft Office Programs (SAP a plus)
• Excellent written and oral communication skills

Knowledge, Skills and Abilities:
• Experience with MRB design, or repair of structures
• Knowledge of corrosion prevention
• Knowledge of non-destructive testing
• Advanced knowledge of Aircraft Structures or Systems
• CATIA V5, and Standard Repair Methods (SRM)
• Extensive experience with Six Sigma

The Structures Company is an AA/EOE.
 
Job Number: 245
Rate: $55/HR
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist - Lathes - 2nd Shift - Aerospace - Everett, WA

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist - Lathes - 2nd shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical college or equivalent experience in industry.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist Millturn - 2nd Shift - Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist Millturn - 2nd Shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer with Composites

Description:
• Plans, directs, and coordinates manufacturing processes on factory floor
• Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.
• Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency
• Confers with planning and design staff concerning product design and tooling to ensure efficient production methods.
• Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards.
• Estimates production times, staffing requirements, and related costs to provide information for management decisions.
• Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.
• Applies statistical methods to estimate future manufacturing requirements and potential.


Some Combination Of:

• Authoring work instructions
• Designing tools and fixtures
• Working with Design engineering to ensure manufacturability (DFMA)
• Composite part experience (hands on or design)
• Composite or metallic structures experience (hands on or design)
• Root Cause analysis and corrective action implementation
• Engineering Liaison to manufacturing
• Planning and sequencing the build of parts and assemblies
• Experience Designing with Catia
• An engineering degree or 5 years of related experience



Required:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline or equivalent of 7+ years of role related experience.
• Experience in aircraft composite fabrication and assembly processes
• Knowledge of lean manufacturing philosophies and tools
• Excellent verbal and written communication skills
• Excellent interpersonal and coaching skills
• Ability to interact with all levels of the organization
• Excellent Organizational Skills and problem-solving skills
• Strong team player
• Excellent computer skills, word, excel and PowerPoint
• CAD experience (Catia V5 mandatory and Solidworks preferred, but not required)
• Knowledge and experience with AS9100 a plus
• Experience with manufacturing based ERP systems a plus
• Must be able to work all shifts and available for overtime as well as weekends when needed.
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).

The Structures Company is an AA/EOE.
 
Job Number: 270
Job Location: CA
Rate: $50-$60/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Process Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience of working in a team environment to identify substantiating rationale for selecting materials and processes that become part of engineering models.
- Successful history of generating work authorizing instructions, test plans/reports and specifications.
- Ability to communicate with stakeholders and document accurate and timely project updates.
- Understand FAA regulations and certification processes.
- Special Missions - Highly prefer: KSA in Non-Metal Sealants and Coatings, Composites and Materials Processing.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10372
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

Required Skills:
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.
 
Job Number: 10428
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10435
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Ability to obtain and maintain a secret level security clearance

Familiarity with C130 or other military aircraft platform

Experience with Catia V5 or similar 3D parametric modeling program Demonstrated ability to turn requirements into design solutions in a aircraft or similar engineering/development role Demonstrated previous success working in a team based environment to meet objectives Strong communication skills, both oral and written Experience with Teamcenter or similar PLM software tool Familiarity with or exposure supporting the manufacture of sheet metal or milled components Experience or familiarity with engineering change documentation Familiarity with ANSI, ASME or related design and drafting standards
 
Job Number: 0449
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Duration: 9 month contract
Shift: 1st or 2nd shift and weekends.
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Bachelor's Degree or Master's Degree required****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.


Requirements:
- Experience with Architecture of hydraulic systems
- CATIA V5 experience.
- Experience generating subsystem layouts and designs.
- MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
- Self-motivated and ability to work in a fast paced aircraft design environment.
- Experience leading small engineering teams
- Microsoft Office proficiency.
- Excellent oral and written communication skills.

Education:
Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10236
Job Location: Palmdale, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Hydraulics & CATIA (309)

Description:
*This is an 8 month, full time contract position, located in Palmdale, CA*

We are hiring for a mechanical engineer who will be using CATIA V5 to design hydraulic systems for military aircraft. Position will also involve integration, layouts analysis and testing of designs. Candidate may be involved in final installation of systems.
Required:
*9 years experience in hydraulic system design using CATIA.
*Good subsystems design and layout experience
*Ablity to to work 1st or 2nd shift and weekends
*Active Secret Clearance (with investigation within the last 5 years)
*Engineering degree

Pluses:
*MRB skills
*Some previous experience in leadership
 
Job Number: 309
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / Catia V5 / hydraulic systems - Clearance CA

Description:
Engineering - Mechanical Engineer
Work Location: Palmdale, CA
Status: Open
Rate: Open
Qty: 1
Desired Start Date: 1/21/2019
End Date: 9/27/2019

**Position requires people experienced in hardware integration, troubleshooting, and MRB (e.g., identifying workarounds & resolving trouble tickets). The build phase is on an aggressive schedule and having additional help with help meet the schedule milestone.

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.

o Experience with Architecture of hydraulic systems
o CATIA V5 experience.
o Experience generating subsystem layouts and designs.
o MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
o Self-motivated and ability to work in a fast paced aircraft design environment.
o Experience leading small engineering teams
o Microsoft Office proficiency.
o Excellent oral and written communication skills.

**Must be able to work 1st or 2nd shift and weekends.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1309-1S5
Job Location: Palmdale, CA
Rate: open
Per Diem: no
Duration: 9 months
Start Date: 1st or 2nd shift and weekends
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA V (089)

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*12-15 years’ experience in electronics/wire harness design using CATIA V5.
*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Per diem split is available for those travelling for this position

*Must have an Active Secret Clearance (reinvestigated in last 5 years)

*Engineering Degree
 
Job Number: 089
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
• Perform preliminary and detail design of aircraft mechanical systems, including flight controls, landing gear and ECS systems.
• Create 3D/2D definition.
• CATIA V5 is a plus.
• Participate in the Engineering definition review, approval and release process
• Support the review of manufacturing plans and procedures to ensure compliance with design requirements
• Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
• Ability/Interest interacting with the shop floor.

The Structures Company is an AA/EOE.
 
Job Number: 264
Job Location: CA
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT DESTRUCTIVE TESTING - LEVEL 3 ENGINEER

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Sikorsky Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Sikorsky UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in US as a permanent resident.
Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 369310
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Office & Property Coordinator

Description:
We are seeking a highly organized individual to fill the role of Office and Property Coordinator for an exciting new Aircraft project here in Moses Lake, WA. The Office and Property Coordinator is responsible for:

•Administer office activities and maintains onsite properties.

•Develops procedures and policies for administrative activities, such as records maintenance, document preparation, mail distribution, reception, and other related internal operations.

•Works to find improvements or additions to services or processes.

•Purchases and maintains office and property equipment.

•Tracks and analyzes operational costs.



Requirements
•Requires previous experience in an office and property administrative/coordination job on an industrial level.

•The skill to make and analyze administrative procedures is also required.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant ECS & Cooling Systems Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Candidate should have experience with:
- Aircraft environmental control systems
- Specialized onboard equipment cooling systems, including: Liquid cooling systems, Air cycle systems, and Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification and certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10376
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 FL

Description:
Principal Software Engineer 3 (Job Number: 18026677, 18026687, 18026691, 18026697)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 20, 2020

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux




Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process


DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
 
Job Number: MB-1725S
Job Location: Melbourne, FL
Rate: 48-50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Stress Engineer

Description:
• Contributes to planning, developing and coordinating of important engineering projects
• Must have some MRB experience in support of a/c structural repairs.
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area Additional Functions

Unique Skills:
• Must have a minimum of 10 years experience in stress analysis on primary aircraft structure.
• Must have a minimum of 5 years experience in stress analysis on aircraft composite structure.
• Must have a minimum 5 years experience supporting MRB activities on aircraft composite structure.
• Working knowledge of CATIA V5 is a plus.
• This position is full time at a supplier in Tulsa, OK.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-310
Job Location: Tulsa, OK
Rate: $70 - $79
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Education Required: Bachelor's Degree or higher
Duties and Responsibilities include the following:
Seven to 10 years experience in the following:
Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to include material cost savings or expenses.

Establishes decides on work plan and staffing for each phase of project
Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority.
Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget

Reviews status reports prepared by functional managers and consolidates/maintains the Master Program Schedule and is responsible for presenting schedule to customer
Prepares project reports for management, client, or others

Confers with project personnel to provide technical advice and to resolve problems
Coordinates project activities with activities of government regulatory or other governmental agencies
Able to communicate program progress and deficiencies to various RSM/SAC/LM leaders including the C-suite.

Previous experience in VVIP, Head of State, in custom aircraft (rotary or fixed wing) interiors preferred
Must have a history in Management of others.
The program is the VH-92A/Sikorsky S-92
Must be a U.S. Citizen
 
Job Number: 1728244
Job Location: Portland, ORE
Rate: 140-175K annually
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.


Requirements:
• Catia V5
• Project Engineering
• Multi-Function Coordination
• New Product Definition
• Design Integration (10+ Years)
• Configuration Management
• PMP is a plus
• SmarTeam is a plus
• Background in aircraft design and project coordination is required
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
• BSME preferred


The Structures Company is an AA/EOE.
 
Job Number: 261
Job Location: OK
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer

Phoenix, AZ
$43/hr
7 month contract
First Shift
*MUST BE U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
The Project Engineer position is for engineers with five or more years of component and system level design and development experience. This individual should also be considered a technical expert in the design, development and regulatory approval of aircraft systems. This individual should be capable of proposing new technology and/or program directions in support of business unit objectives, as well as to provide technical consultation to Management. This position level is expected to impact business level objectives. Selects engineering techniques to solve problems and make design recommendations.

-Bachelors required
 
Job Number: 10320
Job Location: Phoenix, AZ
Rate: 43.00
Per Diem: No
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Aircraft Product Development)

Description:
The Primary Responsibilities of this position include: •Designing inflatable structures for aircraft evacuation systems and life rafts.
•Assisting in products transition from design to production.
•Designing, developing and improving new or existing Aircraft components.
•Directing the building and testing of prototypes.
•Directing compilation of manuals for customers on products.
•Assisting the Model Shop and/or Drafting.
•Performing analysis of components and systems.
•Performing financial analysis of a project's design components.
•Conceptualizing and preparing preliminary and final detail design and documentation of evacuation systems components and assemblies.
•Managing design process and revisions throughout initial testing.
•May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
•Managing moderately complex/sized projects, hardware design, testing, processing, and projects, including foreseeing technical problems, resolving significant technical problems that may be directed to their expertise.
•Developing patentable material and/or to oversee large, business-critical projects. Participating as a team member in a specific phase of a broad engineering assignment.
•Preparing or directing preparation of appropriate documentation for assigned projects.
•Conducting Root Cause/Corrective Action Investigations
•Ensuring successful completion of the assigned project phase within the budgeted time and cost constraints.
•Participating in defining engineering approaches, and in planning and scheduling work.

Required: BS in Engineering from an accredited university
Preferred: MS in Engineering from an accredited university

Green or Black Belt Certified

Experience/Qualifications
(Basic) •Good interpersonal skills.
•Ability to multi-task and prioritize both daily issues and longer-term projects.
•Strong written and verbal skills.
•Good computer skills, MS Office.
•Good analytical skills.
•At least 5 years of product development experience. (3 years with master's degree)
(Preferred) •Experience with inflatable and machined component design.
•Experience as a project engineer through entire STC, PMA, and/or TSO projects
 
Job Number: 1910097142
Job Location: Phoenix, AZ
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - High Lift Systems

Description:
We are seeking an enthusiastic and experienced Project Engineer to work with the High Lift Systems for an exciting new aircraft project here in Rockford, IL.


Responsibilities:
•Support Supplier Integration Team activities as a project engineer of Mechanical System Design Group for High Lift Systems fora new regional jet aircraft program.

•Represent in a technical capacity and provide support for compliance test witnessing at partner/supplier sites and test Laboratory locations within U.S.

•Provide Qualification and Partner Liaison Coordination Support for Flight Control Systems (High Lift Systems) components.

•Develop and review Qualification Test Plans and Procedures jointly with Supplier for DO-160 and other tests, Review Qualification Test Reports, Similarity and Analysis reports.

•Witness tests as a ‘Test Director” and report on environmental, functional and performance qualification test completion and results in accordance with engineering and quality processes and standards.

•Provide support for test schedule development and tracking metrics and test coordination.

•Provide support for component qualification technical issue resolution and tracking.

•Prepare and issue agenda and status report of test activity.

•Provide support for generation of Test Witness Record (TWR) when Regulatory Agency representatives from JCAB, FAA, EASA or Certifying Staff are present.

•Provide support for Test Procedure deviation documentation as needed during test support.

•Provide support for component qualification document deliverables tracking.

•Support test failure case disposition/resolution and article tear down witness and reporting activities at supplier sites as required by technical teams.









Requirements
•Preferably 10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities.

•Must have experience with life cycle development, test and qualification and certification documentation (QP, QTP, QTR, QSAR) of Electro Mechanical and hydraulically powered Equipment such as:Â slat and flap actuation systems, power drive units, driveline components, position sensors, pumps and valves.

•Have flexibility to travel to partner or supplier locations to support program certification needs as required.

•Willingness to work long hours when requested by the Lead/Manager to support program needs.

•Must have a positive, pro-active attitude, and communicate effectively within a multidisciplinary work culture.

•Be willing to learn, appreciate, and blend into Japanese work and business culture.

•Must be able to travel as required to head office in Nagoya, Japan and Moses Lake Flight Test Center in Washington State as well as Supplier/Partner sites in U.S. to support test witnessing, component conformity inspections, workshops and technical interchange meetings.
 
Job Location: Rockford, IL
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Lead - Repair Engineering

Description:
Project Lead - Repair Engineering
Contract-to-hire
Location: Kansas City, MO
Summary:
We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
• Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
• Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
• Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
• Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
• Identify performance related issues and provides feedback to management.
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
• Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
• Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
• Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
• Approve engineering documents within authorized signatory level.
• Assist in interviewing and making hiring recommendations for new Engineering personnel.
• Participate in the development of work statements and hour estimates in support of proposals.
AUTHORITY:
The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
SKILLS AND KNOWLEDGE:
• Experienced with OEM airframe, system, and interior design practices.
• Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
• Self-motivated and multi-tasker; able to level load own workload.
• Strong time-management, and problem-solving skills.
EDUCATION AND/OR EXPERIENCE:
Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55916
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Purchasing Coordinator

Description:
We are seeking an experienced aerospace Purchasing Coordinator to work on an exciting new aircraft project here in Moses Lake, WA. You will be part of a multicultural team working to bring aviation history to life. The Purchasing Coordinator's role and responsibilities include but are not limited to:

•Coordinate with Vendors, purchasing goods, receiving goods, accounting for said goods.

•Research and evaluate suppliers.

•Negotiate and renegotiate contracts with suppliers.

•Create and send purchasing orders.

•Monitor purchases through the delivery process.

•Evaluate supplier performance.



Requirements
•Strong knowledge of Microsoft Excel and Microsoft Word.

•Aerospace experience ​

•High attention to detail.

•Ability to make quick decisions.

•Organizational skills.

•Written and verbal communication skills.

•Customer service skills.

•Negotiation and conflict resolution skills.

•Ability to work independently.

•Needs to be able to work with Japanese expats.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer

Description:
We are seeking a highly organized individual with excellent communication skills to fill a Reliability and Maintainability Engineer role here in Moses Lake, WA in support of a new aircraft program. The Reliability and Maintainability Engineer responsibilities include but are not limited to:

•Collect, analyze and score Failure Reporting, Analysis Corrective Action System (FRACA) data.

•Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and develop Corrective Action Plans (CAP) for failed aircraft components.

•Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including fault detection and fault isolation.

•Estimate man-hours and elapsed hours for maintenance actions.

•Formulate reliability analyses and predictions including development of failure rate estimates.

•Assess maintainability analysis using digital mockup.

•Assist in developing troubleshooting procedures and guiding maintenance personnel in the performance of troubleshooting as a result of flight squawks during flight test.

•Evaluate flight test campaign events and prioritize them.

•Review the events and evaluate impacts for R&M which means impacts for airline fleet (Dispatch Reliability and Maintenance Cost etc.).

•Coordinate with reliability team troubleshooting members and maintenance team to perform root cause analysis and make feasible countermeasures.

•Conduct detailed investigations for priority issues and root cause analysis through coordination with related team members (Engineering, Maintenance and Flight Test Team etc.).

•Propose feasible countermeasures with engineering and promote their implementation.

•Prepare periodic reports on priority reliability and maintainability issue and the status of proposed countermeasures.






Requirements
•BS Degree in Engineering/Mathematics

•10+ years experience in field


Position also requires experience with or knowledge of the following:

•Failure Reporting, Analysis and Corrective Action Systems (FRACAS)

•Reliability Program Plans

•Reliability Predictions and Analysis

•Failure Modes, Effects and Criticality Analysis (FMECA)

•Maintainability Analysis and Prediction

•Application of probability and statistics to support decisions regarding sample size, burn-in life testing and failure analysis investigations

•Complete competency with Microsoft Word, Excel and PowerPoint

•Good written and oral communication skills

•Strong interpersonal skills especially across cultures

•Ability to work in a fast-paced, collaborative team environment

•Demonstrated ability as a team player to build consensus among peers and build effective relationships with team member.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRAIN GAGE APPLICATION TECHNICIAN

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 367131
Job Location: WEST PALM BEACH, FL
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety and Reliability Engineer

Description:
Safety and Reliability Engineer is responsible to oversee all project certification efforts and schedules, including the certification plan, compliance matrix and conformity plan to development and enable a timely finding of compliance. This is an experienced-level position with no supervisory responsibility that reports to the Manager of Certification.

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES:

• Responsible for generating and executing a system safety plan for a given project utilizing the guidance in SAE ARP 4754 and SAE ARP 4761.
• Reviews engineering designs and develops (with support of technical experts) design assurance levels for aircraft systems and components.
• Generates functional hazard assessment (FHA) and system safety assessment (SSA) deliverables, including fault tree analysis (FTA) and failure modes and effects analysis (FMEA).
• Conducts reliability calculations following MIL-HDBK-217 to develop failure rate predictions and MTBF values.
• Performs a variety of complicated tasks.
• Keeps aware of regulatory guidance and requirements by the regulatory agencies.
• Remains cognizant of industry regulatory means and methods.
• Stays informed of developments and changes in certification requirements.
• Follows company policy and maintains appropriate documentation for process, unit, and company reports.
• Assists as subject matter expert to the training department.
• Responsible for maintaining effective communication, coordination, and working relations with company personnel and management.
• Responsible for successful project certification efforts.
• Ensure excellent coordination with other groups on certification status and any needed support.
• Relies on extensive experience and judgment to plan and accomplish goals.
• Provides feedback and mentorship to less experienced certification group members.
• Follows Company policy and maintain appropriate documentation for process, unit, and company reports.
• Follows GDC Standard Operating Procedures and provide feedback on improvements and clarification.
• Generates reports, and prepares presentations.
• Prepares necessary government, company, and industry reports.
• Responsible for maintaining effective communication, coordination, and working relations with Company personnel and management.
• Works with other company departments as needed to maintain schedules and implement changes.
• Provides assistance and support to related departments as required.
• Keeps supervisor informed of area activities and of any significant problems.
 
Job Number: 19-827
Job Location: TX
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sikorsky Account Manager

Description:
We are seeking a well seasoned, former Engineering or Supply Chain employee of Sikorsky who has a developed network. Gear system design and manufacturing experience is preferred but not mandatory. Advanced Programs experience is desired.

Sikorsky experience is REQUIRED.

This position will be a part-time opportunity, requiring approximately 10 hours per week onsite in Stratford, CT.

The Company seeking candidates for this role is a Design-to-Specification and Make-to-Print manufacturer of Gears, Shafts, Housings and fully Integrated Gearboxes for aircraft turbine engines and rotary wing aircraft Dynamic Systems. The Company is highly experienced and successful in development and manufacture of prototypes of such components.

The scope of work envisioned for the candidate has proven in previous engagements to include the following:
- Appropriate use of personal knowledge and established contacts within Sikorsky to assist in identifying and establishing dialog with key personnel relevant to New Program Dynamic System design and development.
- Appropriate use of personal knowledge in the dis-ambiguation of program documentation, communications and situations.
- Occasional brokering of meetings for Company Personnel with our client's Personnel
- Occasional assistance with arrangement of individual and Company Team visits to our client site
- Occasional assistance with Company personnel visit logistics
- Occasional travel for assistance with meetings at Company’s facility


____________________________________________________________________
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55862
Job Location: Stratford, CT
Rate: Open
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$70.57/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*REQUIRES AN ACTIVE SECRET CLEARANCE*

Description:
-Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software.
-These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues.
-In a fast-paced, multi-disciplined research and development environment.

Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.
-Bachelors degree required

ADA - 1-2 years preferred
C++ - Advanced Level - 6 + Years preferred
Linux - 4 - 6 Years preferred
Modeling - 4 - 6 Years preferred
OO Design - 6 + Years preferred
OO Programming - 6 + Years preferred
Real Time - 4 - 6 Years preferred
Simulation - 4 - 6 Years preferred
 
Job Number: 10297
Job Location: Marietta, GA
Rate: 70.57
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$67.23/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*REQUIRES AN ACTIVE SECRET CLEARANCE*

Description:
-Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software.
-These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues.
-In a fast-paced, multi-disciplined research and development environment.

Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.
-Bachelors degree required

ADA - 1-2 years preferred
C++ - Advanced Level - 6 + Years preferred
Linux - 4 - 6 Years preferred
Modeling - 4 - 6 Years preferred
OO Design - 6 + Years preferred
OO Programming - 6 + Years preferred
Real Time - 4 - 6 Years preferred
Simulation - 4 - 6 Years preferred
 
Job Number: 10298
Job Location: Fort Worth, TX
Rate: 67.23
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
163931
1313-1 Software Engineer
Work Location: Marietta, GA
Status: Open

Qty: 5
Desired Start Date: 1/16/2019
End Date: 3/8/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues in a fast-paced, multi-disciplined research and development environment.
Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test.
Some requirements analysis, system verification and validation may also be required.

Region: Marietta, GA
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $69.00 Hourly

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1313-1S5
Job Location: Marietta, GA
Rate: 69/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
163932
1312-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 10
Desired Start Date: 2/4/2019
End Date: 3/27/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment.

Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test. Some requirements analysis, system verification and validation may also be required.

Region: Fort Worth, TX
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly OT40

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1312-1S5
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintainability Engineer

Description:
Job Title: Senior Maintainability Engineer

Duration: 6 to 12 Month Contract Position

Location: Chula Vista, CA

Work Status: United States Citizen or Permanent Resident / Green Card Holder


Education: B.S. Degree Preferred in Aerospace, Mechanical, Civil Engineering or Structural Engineering.


Job Summary:

Provide maintainability engineering services in support of nacelle component design and substantiation.

Qualifications:
Must be able to perform each essential function and have education, skills and experience listed below.

Key Words In Resume - Maintainability / Engineer / Analysis / CATIA / Aerospace OR Aircraft.

Essential Functions & Responsibilities –

Plan, analyze and execute maintainability concepts for aircraft nacelle components and assemblies.

Document maintainability plans, concepts, and analyses in formal reports, present in program reviews.

Effectively use CATIA v5 in support of analysis and documentation of maintainability efforts.

MINIMUM Education and Experience
•Minimum of ABET approved Bachelor degree in aerospace, mechanical, civil or structural engineering. Masters preferred
•Minimum of 5 years’ experience in maintainability of aircraft components
•Must be a US citizen or green card holder

Preferred Experience and Interpersonal Skills
•Experience in design or maintainability of nacelle components and mechanisms preferred
•Experience in design or maintainability of engine build-up preferred
•Strong interpersonal skills and a very high degree of collaboration at all levels required
•Demonstrated ability to multitask with strong task orientation and attention to critical details required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Be a collaborative, cooperative, creative, insightful, high energy self-directed and thoughtful considerate team player
•Ability to work independently, be insightful, resourceful and innovative and willing to do whatever work is assigned

Required Computer Skills
•Expertise with CATIA v5 – MIN 6000 hrs
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook

Certificates, Licenses, Registrations: None Required Except Diploma for BENG Degree or higher in Mech, Aero, Civil, or Structural.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55556
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Manager - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


We have several direct and contract Sr. Program Manager positions in the Seattle area working on aircraft actuation system components in an R&D and Manufacturing environment.

This position will involve responsibility to oversee and effect the on time delivery of several simultaneous aircraft related subsystems programs with support from the design, R&D and manufacturing departments.

This position will also require the development of new business or expanding the product line with the customer. Will also involve establishing milestones and monitor adherence to master plans and schedules,

will identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.

Leads the work of employees assigned to the program/project from technical, manufacturing and administrative areas.



Overview

The Senior Program Manager is responsible for managing assigned customer programs from proposal through production. In conjunction with Business Development, the Program Manager serves as a direct contact to the customer for program business matters and issues.

Responsibilities

Interface with Customer Contracting Personnel, Customer PM, Government Contracting Officer (CO), Government Task Leader (GTL), the contract level Contracting Officer’s Representative (COR), government management personnel and customer agency representatives.

Responsible for formulating and enforcing work orders (resource schedule, project statements)

Developing and maintaining program master schedules and milestones

Reviewing work discrepancies

Identifying/quantifying scope change issues

Coordinating RFQ responses

Generation of monthly cost, schedule, technical status reports

Supervising program personnel and communicating program goals to Team Members

Responsible for the overall contract performance including the profit and loss of the program(s) through the life of the contract(s)

Must have recent experience in project development from inception to deployment as well as expertise in the management and control of funds and resources



Qualifications

Bachelor’s degree in Engineering required

At least 5 years of direct program management experience in an highly regulated manufacturing environment, aerospace a plus

PMP or PGMP Certification is preferred

Must have demonstrated capability in managing multi-task contracts and/or subcontracts of various types and complexity and generation of monthly cost/schedule progress reports

Must have demonstrated capability in managing multiple projects in parallel

Strong business acumen coupled with mental aptitude and motivation to learn new functions and expand areas of expertise

Experience required with FARs, contractual requirements and contractual negotiations

Manage all major issues in primary practice areas with minimal supervision

Proven ability to track and report programs against schedule, budget and phase review objectives

Develop and implement recovery and action plans for off-track programs or unplanned events impacting programs

Demonstrate initiative and advanced interpersonal skills in team problem solving situations, relationship building and aligning with business goals

Excellent leadership, organization, communication and negotiation skills

Position requires frequent interaction with various levels of and Customer management

Proficiency with MS-Project program scheduling and resource allocation planning tools is essential

Familiarity with Government regulations including ITAR and Export Control

Ability and willingness to travel approximately 10%
 
Job Number: KeltiaPM1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Solidworks Designer

Description:
Senior Designer
Location: Port Angeles, WA (98363)
6+ month contract with potential to convert fulltime

Job Description:
We are seeking a Sr. Solidworks Design Engineer to support aircraft general mechanical design (metals, fastener selection etc., ), fluid systems (manifolds, lines, etc.), plastics/composites, and electrical systems (wiring harnesses, routing, etc.) aircraft systems design team on various design, integration and release of Environmental and other control systems and installation drawings.

Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple products/programs. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups and internal partners. Reviews and assigns work to others. Works under minimal direction.

Required Skills:
•SolidWorks
•EPDM advanced level

Preferred Skills:
•Electrical and wire harness design understanding

Min years of experience:
10 years

Degree Requirements:
Bachelor's Degree
 
Job Number: 55061
Job Location: Port Angeles, WA
Rate: 65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Location: Savannah, GA
Rate: $72.00/HR
Duration: Long Term
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

**MUST be a U.S. Citizen or Permanent Resident**

Responsibilities:
- Candidate will be performing structural analysis of company interior monuments using FEA and classical hand analysis.
- Responsibilities will include both the analysis and certification documentation.

The ideal candidate will have experience in the following:
- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast paced completion-style environment
- Working knowledge of FEMAP is required

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10437
Job Location: Savannah, GA
Rate: $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique skills:
• Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis.
• Responsibilities will include both the analysis and certification documentation.
• The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures
• Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
• A working knowledge of FAR part 25 certification requirements
• A good understanding of a fast paced completion-style environment
• Working knowledge of FEMAP is required

Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area


Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-356
Job Location: Savannah, GA
Rate: $68 to $75
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following: - Experience performing structural analysis on aircraft Interior Furnishings - Use of finite element analysis for both primary and secondary structures - MRB experience for both Primary and Secondary Structures - Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations - A working knowledge of FAR part 25 certification requirements - A good understanding of a fast paced completion-style environment - Working knowledge of FEMAP is required
 
Job Number: 142761
Job Location: Savannah, GA
Rate: $72.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $79.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2) Experience as a stress analyst in post-production environment or a production MRB stress engineer
3) Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6) Practical hands on aircraft experience and problem solving

Preferred Skills:
1) Company engineering experience, e.g. G650, G500, G600.
2) Experience in fatigue analysis and damage tolerance analysis.
3) Experience in the repair and analysis of composite structure
4) Experience in repair and analysis of aircraft landing gear.
5) Experience in development of Structural Repair Manual (SRM) data.
6) Experience with foreign airworthiness regulatory agencies

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10434
Job Location: Savannah, GA
Rate: $79.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience.
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Static analysis of composite structure
- Composite allowable testing and certification requirements.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. To be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10299
Job Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Requirements:
- This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure.
- The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis.
- The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers.
- The candidate will be responsible for documenting work clearly and concisely.
- The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures.

Education:
- B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
- Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).
 
Job Number: 9732
Job Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst - Structural Repair

Description:
A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs. Experience as a stress analyst in post-production environment or a production MRB stress engineer. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair 4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers. Practical hands on aircraft experience and problem solving The following unique skills are preferred: Experience in fatigue analysis and damage tolerance analysis. Experience in the repair and analysis of composite structure. Experience in repair and analysis of aircraft landing gear. Experience in development of Structural Repair Manual (SRM) data. 6) Experience with foreign airworthiness regulatory agencies
 
Job Number: 19-134273
Job Location: GA
Rate: $58.00
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Seeking an Airframe Stress Engineer who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. This position will initially be located in our Reno, NV, headquarters and report directly to the Structures Manager.

Qualifications:
• Build and Lead team developing stress analysis methods and tools for AS2 aircraft design and certification.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Develop roadmap for structures team - in partnership with Tier 1 supplies and Partners – in the areas of analysis methods, tools and failure criterions for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity team.
• You must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.
 
Job Number: 42-012
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience. Strong background in classical stress analysis. Experience with Catia V5 to support stress analysis and drawing release. Experience with reviewing 2D drawings. Ability to work independently under limited supervision. Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. Static analysis of composite structure. Composite allowable testing and certification requirements. Experience with Patran/Nastran is a plus. Strong preference for engineers that enjoy working in a collaborative environment. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 19-652-141903
Job Location: Southeast
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
• Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 24-313
Job Location: Savannah, GA
Rate: $74 - $80
Per Diem: YES
Overtime: YES
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer (FEMAP)

Description:
Ideal candidate will have experience in the following: Use of finite element analysis for both primary and secondary structures. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations. A working knowledge of FAR part 25 certification requirements. A good understanding of a fast phased completion style environment. Working knowledge of FEMAP is required.
 
Job Number: 19-826
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer / Stress Analyst with Nastran & Abacus (472)

Description:
*This is a 15 month contract position located in Palmdale, CA*

*No relocation is available, must have an active clearance to apply*

*On site position, per diem SPLIT is available for those out of town*


We are seeking a contract flight vehicle (fixed or rotary wing) stress / structural analyst who will be working on aircraft and or missiles applying knowledge to dynamics and stress of flight upon vehicles.

Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:

*Current Active Secret Clearance; Requires applicants to be US Citizens
*8+ years’ experience in stress/structural analysis of aircraft using FEM (Nastran or Abacus).

*Knowledge of SLIM or VISION.
*Good FEA and FEMAP skills.
*4 year engineering degree in ME, aerospace or equivalent
 
Job Number: 472
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engineers - Must be degreed

Description:
*Must have a B.S. Engineering Degree
Catia V5 or Pro-E or UGNX Experience
Structural & Interior Payload background
Aircraft/Aerospace Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-Struct-AL
Job Location: Huntsville, AL
Rate: $65.00-$70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: 1/11/2019
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3 / FEMAP / Nastran / no clearance CA

Description:
Structural Analysis Engineer 3 (Job Number: 18026724)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $54.00

Schedule: 9/80 A

Location: El Segundo, CA

Duration of assignment: Up to 1 year

Aerospace Systems located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 5 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 3 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1712
Job Location: El Segundo, CA
Rate: 54/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4 CA

Description:
163956
Structural Analysis Engineer 4 (Job Number: 18027073)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay Rate: $65 to $67/hr

Work Schedule: 9/80

Duration of Assignment: 1-31-20

Aerospace Systems client located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 9 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 7 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1707
Job Location: El Segundo, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
162964
1151-1 Engineering - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 7
Desired Start Date: 12/18/2018
End Date: 12/7/2019

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures. Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).

Work Location: Palmdale, CA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $71.98 Hourly

Skills:
Software Skills Abaqus No 9 6 + Years
Software Skills Finite Element Analysis (FEA) No 9 6 + Years
Software Skills Nastran No 9 6 + Years
Technical Skills Stress Analysis Yes 9 6 + Years
 
Job Number: JE-1151-1S5
Job Location: Palmdale, CA
Rate: 71.98/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Position Purpose:
The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership. The group is involved with the current company fleet and new product development. This job is for placement in the Core team working on the Special Missions aircraft. Open to US citizens or permanent residents.

Unique Skills:
• Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
• Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
• Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
• Minimum 10,000 hours or 5 years of experience on CATIA v5 in primary Structural Design
• Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
• Proficiency in CATIA v4 and in SmarTeam PLM database
• Experience with green aircraft structural modification
• Prior work experience with company aircraft design
• Experience with knowledge management processes

Responsibilities include:
• Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
• Engage various engineering, manufacturing and product support teams to complete designs
• Participate in design reviews
• Interact with suppliers and prepare technical coordination memos
• Prepare engineering reports
• Document, track and manage design projects of various magnitude using online knowledge bases and tracking tools
• Provide technical leadership and mentoring to junior engineers

Experience/Education:
• Minimum of a Bachelors Degree in engineering (AE, CE, ME)
• Minimum of 5 years of experience on primary airframe structure
 
Job Number: 24-349
Job Location: Savannah, GA
Rate: $64
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Location: Savannah, GA
Pay Rate: $64.00/HR
Duration: 6 Month Contract

****Must be a U.S. Citizen or Permanent Resident****

Job Description:
-The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership.
-The group is involved with the current Company fleet and new product development.
-This job is for placement in the Core team working on the Special Missions aircraft.

Qualifications:
- Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
- Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in CATIA v4
- Proficiency in SmarTeam PLM database
- Experience with green aircraft structural modification
- Prior work experience with Company aircraft design
- Experience with knowledge management processes

Competencies:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Structural Design work

Responsibilities include:
- Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers
 
Job Number: 10355
Job Location: Savannah, GA
Rate: $64.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Currently seeking a Structural Design Engineer (Wing or Fuselage) for a 12+ month contract. The ideal candidate will possess 5+ years of primary and secondary conceptual design experience with a focus in either wing, or fuselage design.

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cst and producability
• Working knowledge of composite executive aircraft construction including primary and secondary structure

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree - Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 5 years of primary and secondary Executive Aircraft structural design experience
• Experience with Catia V5
• Knowledge of Fibersim Is a plus


The Structures Company is an AA/EOE.
 
Job Number: 212
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Duration: 10+ Months
Start Date: FEBRUARY 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Seeking an Aircraft Structural Design Lead who will be responsible for leading all structural design activities. This position will be located in Reno, NV and report directly to the Structures Manager.

Qualifications:
• Build and Lead all parts of Aircraft Structural Design organization
• Strong knowledge and understanding of latest structural design as well as manufacturing trends in the Aerospace industry
• Previous experience with Conceptual design is a must.
• Analyzes the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between company program, Tier 1 supplier and regulatory authorities
• Thorough understanding of the structural design requirements for Part 25 certification
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacturability and certification requirements
• Develop schedule, cost and supplier management milestones
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Client places a premium on problem-solving abilities and innovative thinking.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on the aircraft development program
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Must have demonstrated leadership capabilities
• Experienced in dealing with and influencing internal and external stakeholders
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets
 
Job Number: 42-011
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Design Engineer

Description:
Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies Minimum 10,000 hours or 5 years’ experience on CATIA v5 in primary Structural Design Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Generative Drafting (2D Drawings), Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in CATIA v4 - Proficiency in SmarTeam PLM database - Experience with green aircraft structural modification - Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes Competencies essential for the job: - Strong interpersonal skills and ability to work in a team environment and across disciplines - Ability to communicate technical findings and recommendations clearly - Humility, be a team player, help teammates - Passion for Structural Design work Responsibilities include: - Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design - Engage various engineering, manufacturing, and product support teams to complete designs - Participate in design reviews - Interact with suppliers and prepare technical coordination memos - Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools - Provide technical leadership and mentoring to junior engineers. MUST BE US PERSONS TO QUALIFY TO FOR THE POSITION.
 
Job Number: 19-141915
Job Location: Southeast
Rate: $64.00/hr
Per Diem: Split
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Structures MRB Engineer has minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel) - Typically a 40-hr. work week, with some week/weekend OT.
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Room Attendants

Description:
STS Technical Services is hiring Supply Room Attendants in Atlanta, Georgia!

Job Summary:

The Supply Attendant is responsible for warehousing and distribution of aircraft parts and related materials within logistics operation. Duties include, but are not limited to: data accuracy, compliance processes, packaging preservation, proper binning, issuing, receiving and shipping of material managed in the stores operation. Further responsibilities include, but are not limited to: responsible for safe operation of mechanical and manual material handling equipment; responsible for safe operation of company vehicle.

Qualifications You'll Need To Have:

Must have a valid driver's license
Should possess the ability to meet deadlines with high productivity and accuracy
Prefer minimum 6 months experience in warehousing and logistics, exposure to inventory management systems highly preferred
Full cycle - shipping/receiving, reviewing, comfortable matching drawings/numbers against FAA documentation
Must be a team player with focus on customer service. Must be able to work a flexible schedule including weekends and holidays
Must be willing to work rotating shifts and weekends
Additionally, candidate must be able to read and write English and have some working knowledge of personal computers
Must be able to work well with others
Must be able to work in a safe manner and be able to lift up to 80 lbs utilizing proper equipment or assistance
Must be performing satisfactorily in present position

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45671
Job Location: Atlanta, GA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer - Bleed Air

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Must have experience with system layout/conceptual design of aircraft bleed air systems during conceptual/preliminary design phase Aircraft experience
• Prepare 3D installation and detail models of the BAS and VCS.
• Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science - Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.


The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer

Description:
PDS Tech is seeking an Senior System Safety Engineer for an open position in Wichita, KS.
In your role, you will:

Support certification of Textron Model 700 (Longitude).
Writing SSA’s to support certification specifically around Propulsion, fuel systems, thrust reversers, and electrical systems

Skill Set / Experience Level – Senior System Safety Engineer with experience at OEM part 25 Aircraft Manufacture or significant component supplier such as Honeywell or Rockwell Collins.
Education and Experience:

Engineering Degree or 10 years plus of engineering experience
Minimum of 10 years of aircraft design experience required
Experience with part 25 REQUIRED
 
Job Number: 1910097948
Job Location: Wichita, KS
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer - Mid-Level

Description:
General Summary:
This position is for a mid-level engineer reporting directly to the Section Chief of System Design Assurance. The engineer will be responsible for compiling system safety assessments on various airplane systems.


Duties and Responsibilities:
Primary tasks include performing Functional Hazard Assessment (FHA), System Safety Assessment (SSA) and Particular Risk Assessment (PRA) to support all stages of aircraft development. Secondary tasks include review and support of supplier FMEAs, compilation of safety documents, supplier coordination, and inter-departmental coordination.


Knowledge, Skills and Abilities:
• Working aircraft and system safety assessments in accordance with SAE ARP 4761
• Capable of handling complex individual work assignments
• Possess excellent coordination skills, and must work well in a multi-functional team environment
• Familiarity with requirements of 14CFRPart 23 and EASA CS23 is required. Experience with both mechanical and electrical/avionics systems is preferred


A strong background and demonstrated ability is required in the following areas:
o Conduct of SAE ARP4761 programs
o Performance of Reliability Predictions, FMEAs, FTAs, CCAs, and maintenance task identification for continued airworthiness
o Compilation of System Safety Analyses
o Supplier interface, coordination, and task management
o Must be familiar with Microsoft Office suite (Word, Excel, Project, PowerPoint). Must be conversant with RM&S analyses tools e.g. PTC Windchill, Isograph Reliability Workbench, CAFTA
o Familiarity with requirements management tools (DOORS), PLM tools (TeamCenter etc.) and SAP is desired

The Structures Company is an AA/EOE.
 
Job Number: 269
Job Location: NC
Per Diem: $65/Hr
Duration: 10+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineers - Many Needed

Description:
Writing SSA’s to support certification specifically around Propulsion, fuel systems, thrust reversers, and electrical systems

Skill Set / Experience Level – Senior System Safety Engineer with experience at OEM part 25 Aircraft Manufacture or significant component supplier.

Qualifications
Education and Experience:
Engineering Degree or 10 years plus of engineering experience
Minimum of 10 years of aircraft design experience required
Experience with part 25 REQUIRED

Email resume to: mmccarthy@pdstech.com
 
Job Number: Sier-Safety
Job Location: Wichita, KS
Rate: $75.00-$78.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-309
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer ( Clearfield , Utah ) 8853608

Description:
Tooling Engineer ( Clearfield , Utah ) 8853608
12 Month Contract

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment, at the Clearfield, Utah location:

Responsibilities:
• Concept and design of special tooling within an Integrated Product Team structure
• Project management of vendor and CAD resources for design and fabrication of individual rocket motor and aircraft tools
• Use and/or manages Computer Aided Design (CAD) resources for tooling design
• Work with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proof tooling upon receipt
• Maintain tooling documentation related to design, fabrication and proofing
• Provide engineering disposition of damaged and discrepant tooling and oversee return to production
• Provides tooling estimates for new tools

Education and Experience Requirements:
• BS in Mechanical, Civil or Aerospace Engineering, or related field plus a minimum of internship experience.

Screening Criteria:
• Experience with design of mechanical and structural elements
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts preferred
• Experience with general metallic fabrication including welding, machining, and forming.
• Understanding of 3D CAD systems (CATIA V5, NX) preferred
 
Job Number: 8853608
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Designer

Description:
Description
Produce wire harness assembly (formboard) drawings
Produce wire harness manufacturing instructions
Produce wire harness termination drawings
Produce wire harness installation instructions

Qualifications:
Strong understanding of wire harness manufacturing process and formboard drawings
Strong understanding of electrical schematics & termination drawings
Experience working with electrical designers during schematic creation
Experience integrating wire harnesses in vehicle
Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
Catia V5 Electrical Workbench is a plus
Experience with Mentor Graphics is a plus
Experience with composites is a plus
Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 267
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search