Job Search Results

814 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/12/05 Thursday 06:56PM Pacific Time by ContractJobHunter. )

Listings 1 - 814

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 05/01/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/13/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 11/14/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
56190 | Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12-18
Start Date: ASAP
Input Date: 04/01/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 09/23/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 07/09/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1470-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.
Landing Gear Engineering experience is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1470-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1468-1 Aeronautical Engineer

Work Location: Palmdale, CA
Status: Open
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will have a complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.

3-D CATIA experience is required.
Mechanisms Engineering experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1468-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1467-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will apply extensive technical expertise with mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction, flight control, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at site and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1467-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/11/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1464-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will have a complete understanding of the mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction systems, flight control systems, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1464-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/18/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 3 – Landing Gear

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 3 – Landing Gear
(U.S. Citizenship Required*)
Palmdale, CA
2019-8456


Responsibilities:
• Coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
• Develop, test, and validate mechanical designs.
• Coordinate with suppliers, internal and external integrated product teams, management and the customer.
• Create and/or modify primary and secondary structure with 3D CATIA models, assemblies and installations.
• Create and/or modify system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at company and external supplier facilities.

Qualification:
• Required – active Secret clearance an investigation completed within the last 5 years
• Complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
• 6+ years’ 3D CATIA experience is required.
• 6+ years’ Mechanism Design experience is required.
• 6 + years’ Geometric Dimensioning and Tolerancing (GD&T) experience is required.
• 6+ years’ experience with Stress Analysis preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience; or Master’s and 7-13 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8456
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 3 – Mechanism Design

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 3 – Mechanism Design
(U.S. Citizenship Required*)
Palmdale, CA
2019-8452


Responsibilities:
• Coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
• Develop, test, and validate mechanical designs.
• Coordinate with suppliers, internal and external integrated product teams, management and the customer.
• Create and/or modify primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Create and/or modify of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at company & external supplier facilities.

Qualification:
• Required – active Secret clearance with investigation completed within the last 5 years
• Complete understanding of the mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction systems, flight control systems, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis.
• 6+ years’ 3D CATIA experience is required.
• 6+ years’ Mechanism Design experience is required.
• 6 + years’ Geometric Dimensioning and Tolerancing (GD&T) experience is required.
• 6+ years’ experience with Stress Analysis preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience; or Master’s with 7-13 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8452
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 4 – Landing Gear

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 4 – Landing Gear
(U.S. Citizenship Required*)
Palmdale, CA
2019-8457


Responsibilities:
• Apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
• Coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
• Develop, test, and validate mechanical designs.
• Coordinate with suppliers, internal and external integrated product teams, management and the customer.
• Create and/or modify primary and secondary structure with 3D CATIA models, assemblies and installations.
• Create and/or modify system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at company and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

Qualification:
• Required – active Secret clearance with investigation completed within the last 5 years
• Landing Gear Engineering experience is required.
• 6+ years’ 3D CATIA experience is required.
• 6+ years’ Mechanism Design experience is required.
• 6 + years’ Geometric Dimensioning and Tolerancing (GD&T) experience is required.
• 6+ years’ experience with Stress Analysis preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience; or Master’s and 7-13 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8457
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 4 – Mechanism Design

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 4 – Mechanism Design
(U.S. Citizenship Required*)
Palmdale, CA
2019-8455


Responsibilities:
• Apply extensive technical expertise with mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction, flight control, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis.
• Coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
• Develop, test, and validate mechanical designs.
• Coordinate with suppliers, internal and external integrated product teams, management and the customer.
• Create and/or modify primary and secondary structure with 3D CATIA models, assemblies and installations.
• Create and/or modify system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at company and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

Qualification:
• Required – active Secret clearance an investigation completed within the last 5 years
• 6+ years’ 3D CATIA experience is required.
• 6+ years’ Mechanism Design experience is required.
• 6 + years’ Geometric Dimensioning and Tolerancing (GD&T) experience is required.
• 6+ years’ experience with Stress Analysis preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s and 16 years’ experience required; or Master’s and 14 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8455
Job Location: Palmdale, CA
Rate: Based on experience
Duration: 52 Weeks
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Checker

Description:
The aerospace design checker supports various company projects and programs across the entire life cycle of design and development. Primarily focused on overseeing checking of PMI/Drawings plus management of the aircraft bill of material, including positioning components within the assembly and weight/CG management. This designer position requires close collaboration with the engineering design group supporting preliminary and detail designs of a general aviation electric aircraft.



Specific Responsibilities:

Work under close supervision of the CAD manager.
Support the engineering department checking and reviewing CAD solid models of airframe structural, mechanical, and systems detail designs of parts and assemblies employing metallic and composite materials.
You will check documentation of fabricated drawings, diagrams, Spec and Source Control Drawings, and assemblies to ensure conformance to design documentation, Geometric Dimensioning and Tolerance Standards and design data supplied by engineering.
Verify form and fit completeness and dimensioning consistency of production drawings.
Perform tolerance stack-up analysis to support fit of components to assembly.
Recommend changes to ensure compliance to standards and specifications.
Maintain weight and CG balance sheet for the aircraft.


Minimum Requirements:

Requires Associates Degree in an engineering or design discipline and ten plus years of design or checking experience.
Advanced understanding of Geometric Dimensioning and Tolerancing, ability to perform Tolerance Stack up Analysis.
Proficiency with Siemens NX preferred, but will consider experience with other 3D CAD tools.
 
Job Location: Aurora, CO
Rate: 100k
Per Diem: no
Overtime: no
Duration: perm
Start Date: ASAP
Input Date: 04/05/2019
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Allison McKenzie
Address: 6870 W 52ND AVE STE 107
City, State: ARVADA, CO 80002
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Drafter/Drafting Engineer

Description:
We are seeking a Level 2 Aerospace Drafter or Designer for a contract in Oklahoma City.

Aerospace Drafting Engineer or Drafter
Location: Oklahoma City, OK (73135)

Citizenship Requirement: US Citizen

Min years of experience: 2 - 10 years’ experience

Detailed Job Description:
We are seeking multiple Drafting engineers, from entry level to mid-level. Must have experience with CATIA V5 and Product Life-cycle Management systems (preferably Enovia), and 2D drawings to Support drafting and parts lists.
Sheet metal parts, simple machined parts, complex machined parts, structural and mechanical installations and parts lists experience is vital.

Required Computer Skills:
CATIA V5 (prefer Enovia or some PLM system)





_______________________________________________________________
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56478
Job Location: Oklahoma City, OK
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 05/07/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 04/04/2019
Last Updated: 12/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/28/2019
Last Updated: 12/05/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker - Mechanical 2D & 3D

Description:
Required Check 2D engineering data and 3D models for conformance to company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.

Review all current positions posted at www.hi-tecsolutions.com/jobs
 
Job Number: 142810
Job Location: Savannah, GA
Rate: 53.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 04/04/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/20/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/12/2019
Last Updated: 12/05/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter

Description:
Expert in the usage of the CREO Parametric cabling module. Experienced writing and incorporating change orders using the ENOVIA PDM system.

MUST be experienced in electro-mechanical design and drafting for military applications, MUST be experienced using the cable module in CREO Parametric. Individual must be technically competent in all levels of documentation and have the ability to plan and carry out work assignments of varying complexity.

Experienced working with 19' (or larger) Equipment Racks/Cabinets.
 
Job Number: 46398
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 04/30/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Ability to obtain a secret clearance is required.

Proficient using CAD modeling tools, especially PTC Pro/e Wildfire and CREO
Must be proficient in creating complex solid models and mechanical designs using CAD systems, preferable PTC Pro-E Wildfire/CREO.
Concept / preliminary design experience
Experience in large structures and large assembly design/modeling • Knowledge of electrical components, electrical and mechanical interfaces • Experienced in the detail design of complex electrical enclosures and cabinets
 
Job Number: 3679
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 04/10/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Our client is looking for a level 4 Engineer to work in Savannah, Georgia! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
* Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
* Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
* Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
* Design Engineer will be required to liaison with the shop on engineering issues.
* Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
* Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
* Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Desired Qualifications and Experience:
* Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130009
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 04/05/2019
Last Updated: 04/15/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 04/26/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 12/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter / Designer

Description:
The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints. These may include utilization of computer aided design applications.

Required:
• Must be familiar with ASME Y14.100 and its interpretation.
• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• Ability to incorporate red-lines to original drawings from shop drawings.
• Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
• Capable of creating complex 3D model parts and assemblies.
• Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
• Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
• Pro/E Wildfire 5 / Creo Elements 1.0 or higher
• Keycreator / Cadkey (other 2D CAD tools acceptable)

Candidate must have an Associates’ degree or higher
 
Job Number: 1910100044
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 06/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designers in Tukwila, WA

Description:
EE Technical Designers Level (2, 3)

Location: Tukwila, WA
Duration: 6+ months

Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

The Electrical Engineering Technical Designer will be supporting primarily BDS and BCA programs and may need to support in an office setting as well as a factory and flight line setting.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 625-Electronic/Electrical Design
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 01/24/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Computer Aided Design (ECAD) Component Librarian

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Electrical Computer Aided Design (ECAD) Component Librarian
(US Citizenship Required*)
Scottsdale, AZ
2019-8434

Responsibilities:
• Create schematic symbols and footprints (cells) for parts using Mentor Graphics xDM Library tools as requested by HW designers
• Create related surface mount and through hole pad stacks, custom pad stacks for heat sinks, back drill/pressfit connector pins
• Use existing part creation processes, implement new processes to improve symbol creation/approval/release
• Work with Part request systems to manage and direct creation, approvals and status
• Interface with layout designers for PCB footprints and schematic designers for schematic symbols
• Interface with component engineering team and documentation team for new part specifications
• Interface with manufacturing engineers as needed for updates to existing library parts as needed
• Involved in all aspects of symbol development, maintenance and support of CAD library at all levels

Qualifications:
• General knowledge of design principles and techniques including computer aided design (CAD)
• Trained/ experienced in the use of current strategic CAD tools (Pro-E/Creo or Solid Works preferred)
• General knowledge of design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning &
• Tolerancing)
• Aware of simple mechanical stress; structural, thermal and tolerance analysis
• Demonstrates initiative, applies personal talent to practical solutions
• Works within the trade space defined (cost / schedule / technology)
• Applies general knowledge effectively in team environment
• Able to accept and integrate constructive feedback
• Demonstrates the ability to weigh risks and make progress in the face of uncertainty
• Willingly takes on problems and commits to solutions
• General proficiency in Microsoft Office applications
• Good written and verbal communications skills
• Fulfills role as a reliable team member and understands own role within team
• Manages time to ensure an assignment's completion
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate’s degree or equivalent is required and 1+ year of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8434
Job Location: Scottsdale, AZ
Rate: Based on experience
Duration: 12 Months
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@Moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description:
AutoCad required. CHS experience preferred. 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:

Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Advanced degree in engineering or related curriculum preferred

The Structures Company is an AA/EOE.
 
Job Number: 289
Job Location: GA
Rate: Up to $68/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 06/06/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required. CHS experience preferred
2. Company Completions electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing, and routing required.
7. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8. Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10651
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/20/2019
Last Updated: 05/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
1) AutoCad required. CHS experience preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.
 
Job Number: 19-144018
Job Location: GA
Rate: $68.00
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/03/2019
Last Updated: 05/14/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Centennial, CO
$34.50/hr - $57.56/hr
9 month contract
First Shift
Possible Travel
*Must Be a U.S. Citizen*

Description:
-5+ years’ experience
-Aerospace experience required
-Bachelors degree required

Main task will be to provide technical system engineering support to existing electrical ground command and control systems. This position will be based in Denver with potential trips to Cape Canaveral Air Force Station and Vandenberg Air Force base.

Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices. Duties include research and analysis of engineering drawings that include hardware at our launch sites located in Florida and California, in the Denver laboratories and implementation of data into a parameters database.

Tasks can vary from analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements. Many of our tasks involve instrumentation activities including interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware. Tasks also include creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.
 
Job Number: 10760
Job Location: Centennial, CO
Rate: 34-57
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/09/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering – RS 3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Electrical Engineering – RS 3
(U.S. Citizenship or Green Card Required*)
Centennial, CO
2019-8526

Responsibilities:
• Provide technical system engineering support to existing electrical ground command and control systems.
• Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices.
• Research and analysis of engineering drawings that include hardware at our launch sites in laboratories.
• Implementation of data into a parameters database.
• Analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements.
• Interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware.
• Creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.

Qualification:
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• 5+ years’ experience
• Bachelors Degree

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8526
Job Location: Centennial, CO
Rate: Based on experience
Duration: 9 Months
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical, Electronic and Electro-mechanical Components Engineer

Description:
Electrical, Electronic and Electro-mechanical (EEE) Components Engineer

Location: Grand Prairie, TX (75051)

9 month contract

Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX. The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electro mechanical components used in military applications. The selected Candidate should be a self-starter, capable of handling several tasks at once. The selected candidate must be able to work without supervision. Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.

Skill/Experience/Education
Mandatory: Must be able to obtain a security clearance.
Must be proficient with computer tools such as MS Excel and Access.
Candidate should have experience in electrical component manufacturing process and physical property analysis.
This position requires periodic travel to both the customer and supplier locations.

Desired-
The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
Experience in Components Engineering with broad knowledge of electronic components and devices.
The ideal candidate has experience working electrical components on a Production Program.
Experience in the disposition of Q-Notes.
Experience with parts release process, and with formal Configuration Board support.
Experience working with Global Supply Chain, Quality and Manufacturing groups.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56604
Job Location: Grand Prairie, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9+ months
Start Date: 04/22/19
Input Date: 04/11/2019
Last Updated: 05/20/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 12/05/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

Description:
Electronics Design and Analysis Engr 5- PCB Designer

Location: El Segundo, CA
Duration: 12+ Months

Job Description:
Mentor Expedition Printed Circuit Board (PCB) Designer
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
Ensure that all requirements for manufacturing and assembly are met.
Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.

Skill Code: 624-Electronic Packaging Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 01/02/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 3

Description:
Electrophysics Engr/Scien 3

Location: Oklahoma City, OK
Duration: 6 months

Description:
OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with:
- Reviewing supplier and partner qualification data
- Nuclear Hardening analysis and test
- EMI/C analysis and test
- EMSEC/TEMPEST analysis and test
- HIRF/Lightning analysis and test
- RF Co-Site analysis
- Antenna Coupling analysis
- Electrical Power Quality and Load analysis
- Test Automation for aircraft modifications.

Other job responsibilities may include:
- Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
- Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
- Develops architectures to integrate systems and components into higher level systems and platforms
- Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
- Defines and conducts tests to validate performance of designs to requirements
- Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
- Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
- Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
- Writes appropriate sections of proposals to support development of new business
- Works under general mentorship.

Skill Code: 62Q-Electromagnetic Compatibility

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Please share updated resume at ravi@iconma.com
 
Job Number: 19-03720
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 03/28/2019
Last Updated: 04/09/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV

Description:
Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**Candidates should have experience specifically with flight electronics packaging for space applications**
**Candidates should have design experience of electro-mechanical packaging or cable harnesses**

Duties:
- Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs
- Candidates should have experience specifically with flight electronics packaging for space applications
- Candidates should have design experience of electro-mechanical packaging or cable harnesses
- Perform engineering design tasks related to space electronics based products.
- Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

Skills:
- Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
- Proficiency in generating drawings is required.
- Familiarity with aerospace/defense engineering design and production processes and disciplines.
- Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
- Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
- Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
- Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Education:
- Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics.
- Willing to accept experience in lieu of Bachelor's Degree.
 
Job Number: 10655
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/20/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate will: •create manufacturing assembly documentation and concept tools and provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
•ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
•be able to perform cost estimates, work to schedules, and write procedures and policies.
•be able to review drawings and concepts and resolve producibility concerns.
•provide technical support to the manufacturing facility as well as to the external suppliers.
•support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
•be able work well in an integrated product development/ design environment.
•present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
•possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications •Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications •Candidate must have 0-2 years of experience working on the manufacture of complex mechanical systems.
•Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Desired experience •working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
•Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
•Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
•Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910099444
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/02/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/26/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 9/80 Schedule
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Job Description:
- Facilities Engineering & Planning, at our clients Los Angeles Site, is looking to hire a Facilities Project Engineer with experience in managing projects for Manufacturing & Process equipment installations and Facility modifications.
- The responsibilities of this position include internal customer interface, external contractor interface, and leading Project Teams on a variety of Facilities Projects (such as purchase and installation of machinery & equipment, facilities upgrades & renovations, moves & rearrangements of office, lab and manufacturing functions, and other support).

Primarily, these responsibilities include:
- Developing and maintaining project scope, schedule, cost, AutoCAD layouts, and project specifications (20%);
- Generating and reviewing/approving work authorizations and invoices for payment (10%);
- Coordinating with Safety, Health & Environment (SH&E), Maintenance, Supply Management, Finance, and others for the successful planning, implementation, and completion of assigned projects (40%);
- Oversight of service and construction contractors (30%)

Skills:
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.

Education:
- BA/BS degree in Industrial, Mechanical, Electrical, Civil, Structural Engineering or Architecture and 9+ years related experience.
- High level of Safety and Customer focus.
- Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
- Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
- Knowledge of local Building codes and AutoCAD preferred.
 
Job Number: 10764
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Maintenance Planner

Description:
Location: Vandenberg AFB (Lompoc), CA
Rate: $30.50/HR
Duration: 1 year contract

****MUST be a U.S. Citizen or Permanent Resident****

Requirements:
1. Seeking an organized detailed oriented individual who can work successfully in a dynamic launch site environment.
2. Seeking an individual who can work well alone or as part of a team.
3. Required to be proficient in a computer related field. Information Technology, Programming, or other Database Management field.
4. Looking of 3+ yrs of experience.
5. EAM / 7i experience desired.
6. Database management and experience preferred.
7. Attention to detail and consistency are pivotal for proper database management.

Job Description:
1. Member of our clients Operations Engineering and Infrastructure (E&I) organization, whose responsibilities include the design, operation, maintenance, and system evolution of all launch site facility and facility support systems, including Environmental Control & HVAC, Facility Electrical/Power, Communications and Data Networks, and Structural/Mechanical ground systems.

Maintenance Planning Role:
1. Identifies, coordinates, plans, schedules and executes preventive and predictive maintenance for facilities equipment, tooling and machinery.
2. Recommends modifications of existing equipment and facilities and the possible replacement of existing equipment, which will improve operations and reduce maintenance costs.
3. Ensures maintenance of records to document safe and efficient operation of equipment and facilities.

Responsibilities:
1. Responsibilities include planning and scheduling of facility maintenance tasks associated with Launch sites at VAFB.
2. Communicates with Engineering and Technicians to ensure accurate and timely maintenance.
3. Provides work orders to execute on-time support required for testing/launch processing activities for 100% Mission Success.
4. Supports commonality of Maintenance planning processes across all product lines and work locations.
5. Provides accurate metrics of maintenance activities to support management reviews and presentations. 6. Support and manage electronic files to ensure security and integrity of the work being generated.
7. Assists Engineering with procedure creation and/or update existing documents to meet organizational goals.
8. Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
9. Proficient knowledge in Microsoft Office Suite.

Education:
1. Requires a bachelor’s degree and 2 - 6 years of experience
 
Job Number: 10625
Job Location: Lompoc, CA
Rate: $30.50/HR
Per Diem: Split Possible
Duration: 1 yr
Input Date: 03/13/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility and Design Engineer

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Facility and Design Engineer
(U.S. Citizenship or Green Card Required*)
Vandenberg AFB, CA
2019-8391

Responsibilities:
• The Facility and Design Engineer will support repairs, modifications, and new designs of launch facilities in support of client Atlas V and Delta IV Launch Operations and Vandenberg Air Force Base California as part of client’s Engineering and Infrastructure Team. The successful candidate will provide engineering and management support of SLC-3 / Atlas V, SLC6 / Delta IV, and other associated facilities. The engineering and management support will include, but is not limited to: architectural, HVAC, electrical, civil, structural and mechanical systems, maintenance and facility corrosion control activities.

• The Candidate will coordinate the procurement of facility services, equipment, and will perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance. The Candidate will perform investigation of anomalies encountered and will be responsible for developing corrective action plans and work documents for both client and sub-contractor support. The Candidate will work with various government groups including Air Force and Base Civil Engineering personnel.

• The successful candidate shall prepare Statements of Work with detailed contractor direction, and manage contractor’s activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs/modifications.

• In addition, the candidate will gather information, perform field walk-downs, and create, schedule and manage the performance of maintenance and/or corrective Work Orders performed by client represented personnel. Support will also include schedule integration and coordination of maintenance activities around launch processing activities. Candidate shall have relevant facility engineering experience with an emphasis on architectural facility/building systems operations/modifications.

• The candidate shall perform engineering calculations, trade-studies, designs, evaluations, and rough cost estimates in support of the above engineering activities.

Qualification:
• Must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members including client represented personnel, customers and subcontractors.
• Ability to solve practical problems. Able to analyze and interpret data to make sound judgments and recommendations. Ability to learn and interpret mechanical and electrical drawings, logic diagrams and technical manuals.
• Basic experience with AutoCAD, create/revise engineering drawings as required.
• Proficient knowledge in Microsoft Office suite.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree from an accredited college in an Engineering or related discipline, or equivalent, with a minimum 3 yrs of professional experience.
• Experience with facilities engineering and plant operations.
• Experience working independently and in a team environment, with both represented and contractor personnel.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8391
Job Location: Vandenberg AFB, CA
Rate: Based on experience
Duration: 12 Months
Input Date: 04/02/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Aviation Inspection Technician

Description:
1st & 2nd shift opportunities await the right candidate in Mesa for Aviation Inspector to perform final inspection.

SUMMARY

Inspects mechanical final assembly installations of the aircraft such as fuselage, landing gears, and tail assemblies. Inspects systems such as hydraulic, rotor, oil, heat and engine. Rechecks work after adjustment or repair. May monitor and verify quality in accordance with statistical process or other control procedures. Provides other inspection and quality services to ensure company products and processes meet customer, company, and other specifications by performing the following duties.

DUTIES AND RESPONSIBILITIES include the following.

" Visually and physically inspects materials, components, subassemblies, assemblies, tools, and final product configuration using blueprints, sketches, engineering drawings, and orders, and other applicable sources to observe, measure, record conformity to customer, regulatory, and company specifications

" Verifies production and engineering test processes for compliance with process methods and procedures

" Records compliance with quality standards to verify that company products and processes meet customer, company, and other specifications

" Solves inspection problems; methods-procedures, plans, and details

" Audits products and processes to verify system

" Maintains necessary inspection logs and writes inspection reports



SKILLS AND ABILITIES

" Thorough proficiency with measuring instruments such as scales, calipers, micrometers, depth gauges, and various types of precision measuring equipment.

" Requires a thorough understanding of all pertinent manufacturing, production and engineering test processes.

" Proficient with Microsoft Office to include Word, Excel and PowerPoint.

" Participation in the FAA Drug Test Program is required.

" The ability to understand and follow instructions and the ability to concentrate is required

" Excellent written, verbal, communication and interpersonal skills.

" The ability to get along with others or to be part of a team.

" Access to Export Control Information.

" Regular attendance at the worksite.

EDUCATION and/or EXPERIENCE

" This job requires 7 years of aviation production/maintenance titled inspector experience or 10 years aviation production/maintenance related experience. An equivalent combination of education and experience can be considered

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-14814
Job Location: Mesa, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-04-11 00:00:00.0
Input Date: 04/11/2019
Last Updated: 06/11/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10637
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/18/2019
Last Updated: 08/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Mechanical Design

Description:
Knowledge of Flight Test Instrumentation Mechanical Design is required Working knowledge of CATIA V5 and SmarTeam is required
 
Job Number: 19-143696
Job Location: GA
Rate: $70.00 - $80.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year+
Start Date: ASAP
Input Date: 04/04/2019
Last Updated: 04/17/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Extensive Catia V5 and SmarTeam experience required.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-332
Job Location: Savannah, GA
Rate: $70 to $ $80
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Cell Tech Level - 3 MA

Description:
164449 Fuel Cell Tech Level - 3

Requirement#
STTTM-REQ-0398
Work Location
Cambridge, MA
Work Week
9/80
Priority
High
Needed Date
04/01/2019
End Date
04/03/2020
Number of Resources
1


--
Job Description
Type of Service
Technical Services
Title
Fuel Cell Tech Level - 3


Description
Technician who is able to install, repair, or maintain fuel-cell based devices.

Skill/Experience/Education
Mandatory
• High School diploma and additional specialized training equivalent to an Associate degree in a field of science or engineering.
• Five (5) or more years of lab or testing experience.
• A basic understanding of chemistry, simple electronics, and computer driven data acquisition/analysis is desirable.
• Ability to read, understand, and follow detailed SOPs and other test documentation required.
• Demonstrated communication and data reporting skills (written and verbal). Experience with MS Office family of products desired.
• Ability to operate safely within a laboratory environment that complies with company chemical hygiene policies and laboratory best practices.

Desired
• Associates degree or Bachelors of Arts/Science in a field of science or engineering.
• Experience troubleshooting chemical, mechanical, or instrumentation systems.
• Prior experience in electrochemistry or the energy storage field a plus.
• Experience with commercial battery testers and/or scientific DAQ systems a strong plus.
• A strong attention to detail and experience with documentation is crucial.

Skills
Testing Battery Testing 4-5 Years Yes
Testing Battery Testing No N/A No


Rate Information
Interview Required
Yes
Min Pay Rate
30.00 USD
Max Pay Rate
40.00 USD

Shift
1st Shift
OT Allowed
Yes (OT Limitation: No)
Travel
No
 
Job Number: JE-0398
Job Location: Cambridge, MA
Rate: 30-40/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 03/26/2019
Last Updated: 04/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeane Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineer 4 / CREO / Electromechanical design URGENT CA

Description:
162029

Ground Product Design Engineer 4 (Job Number: 18000483)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Title: Ground Product Design Engineer 4

Rate: 62 - $67/hour

Location: Redondo Beach, CA

Positions: 1

Duration: 1 Year

Shift: 1st Shift - 9/80

We are currently seeking a Design Engineer to support test set development for EPS-R. Position will require selected candidate to create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables. The selected candidate will be responsible for drawing documentation, design updates and working with mechanical and electrical engineers. Selected candidate must be adept at working independently as well as in a collaborative team environment. Candidate should be able to communicate well verbally and written, and be attentive to detail.


Basic Qualifications:

•Minimum 5 years of experience working in industry
•Experienced in ProE/CREO
•Knowledge with electro-mechanical design/products


Preferred Qualifications:

•AutoCAD
 
Job Number: MB-1657ATO
Job Location: Redondo Beach, CA
Rate: 67/hr max
Per Diem: no
Duration: 1 year
Input Date: 04/29/2019
Last Updated: 05/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 12/04/2018
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/04/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intermediate Design Engineer – Mechanical

Description:
Our client is North America’s leading manufacturer of transit buses. Designed and “built with the future in mind,” these fuel-efficient and zero-emission buses help communities achieve their transit energy goals. Build on your own future by applying to work with us.

Intermediate Design Engineer – Mechanical
Anniston AL
2019-8480

Join our team to take projects from concept to production, including design tasks and releasing Bills of Materials. You will keep track of all the calculations, communications, drawings, and changes for your projects.

Responsibilities:
• Create designs that meet our customers’ specifications while staying within our company’s manufacturing abilities. Calculate & analyze to ensure the engineering designs comply with all the criteria & regulations.
• Test, or initiate testing of, components and installations to verify that everything fits, works, is reliable, and meets our contractual obligations.
• Coordinate your tasks to make sure everything stays on schedule, keeping in mind vendor and production lead times. You’ll keep updating task status and recording time on each task.
• Assist designers or drafts-persons on tasks as needed.
• Interact with vendors and customers on design related issues.
• Check Engineering Documents, instructions to service, shop floor instructions, and others as authorized.
• Lend your Engineering knowledge and abilities to help Production, Quality Assurance, Customer Service Support, and other departments as needed.
• Travel as needed

Qualifications:
• Proficient in CAD and Unigraphics.
• Experience in drafting.
• Strong team work and problem solving
• Motivated self-starter who takes initiative and works well independently.
• Able to multitask and work efficiently in a fast paced, high-demand work environment
• Strong written & verbal communication skills
Preferred:
• NX(Unigraphics), Teamcenter, MATLAB/Simulink, Solidworks, Fortran, Mathcad, and/or LabVIEW.
• Experience in Mechanical Design and/or Experimental Testing/Research.
• Data Processing and/or Analysis skills or experience.

Education and Experience:
• Bachelor’s from an Engineering technical institute as a draftsperson or technologist in Electrical or Mechanical, with 5-10 yrs. experience; or, Master’s with 2+ years of experience.

Moseley Technical Services, Inc. and our client are AA/EEO/Veterans/Disabled Employers.
 
Job Number: 2019-8480
Job Location: Anniston, AL
Rate: Based on experience
Input Date: 04/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 04/22/2019
Last Updated: 09/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Design Engineer (309)

Description:
*This is a full time, 1 year contract located in Palmdale, CA*
*Per diem split is available for our of town contractors*


This position is for a landing gear engineer. A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.

We are hiring for a contract landing gear design engineer who will be working with landing gear retraction, landing gear system principles, including shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.


The contractor will work in a system engineering capacity with much of the work touching several areas of a large aerospace entity including QA, Planning, Tooling, Structural Engineering, Materials, Airframe Design, Fight testing and manufacturing floor.



Daily duties will include developing testing, validation of mechanical designs, working with outside vendors/suppliers and manufacturing teams, clients, creating structures using CATIA, developing system requirements, and statements of work, trade studies, developing testing procedures and plans, adherence to timelines and budgets, leadership of others.

Required:
*10 Years of aerospace structures/mechanical system design and modelling using CATIA; experience with control drawings; strong GD&T (ASME 14.100) experience
*Strong system engineering, requirements development, and supporting of the manufacturing floor
*History of coordinating with suppliers, integrated product teams, management and the customer.
*Familiar with performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
*Leadership experience including project monitoring, adherence to timelines and goals.
*Active Secret Clearance (Special Access) with investigation within last 5 years.
 
Job Number: 309
Job Location: Palmdale, CA
Per Diem: Split
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a landing gear engineer.
- A successful candidate will have a complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.

Required Skills:
- 3-D CATIA experience is required.
- Landing Gear engineering experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10724
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/23/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation completed within the last 5 years****

Job Description:
- This position is for a landing gear engineer.
- A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of mechanical designs.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Technical engineering support for manufacturing, installation and testing at our client and external supplier facilities.
- May function in a project leadership role where they manage system performance, budget and schedule.

Required Skills:
- 3-D CATIA experience is required.
- Landing Gear engineering experience is required.
- Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10725
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/23/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineers - Active Secret Clearance - Excellent Rates**

Description:
*Must have Active Secret clearance
*Catia V5 Experience
*Mechanisms
*Development, test, and validation of mechanical designs
*Stress Analysis

Note: Will pay higher rate for Highly Qualified Candidates

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Landing Gear
Job Location: Palmdale, CA
Rate: up to $160.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 04/02/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineers - Active Secret Clearance - Excellent Rates**

Description:
*Must have Active Secret clearance
*Catia V5 Experience
*Mechanisms
*Development, test, and validation of mechanical designs
*Stress Analysis

Note: Will pay higher rate for Highly Qualified Candidates

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Landing Gear
Job Location: Palmdale, CA
Rate: up to $160.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 04/02/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear and Hydraulic Systems Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-038
Job Location: Greensboro, NC
Rate: Up to $70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for MP&P Engineers // Everett, WA

Description:
MP&P Engineer (Level 3 and 5)

Location: Everett, WA
Duration: 6 Months
3rd shift role

Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes. . Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction. Responsible for implementing automated equipment and processes for use on 777-9 airplane composite wing assembly. Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 12/06/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Our client is looking for an MRB Engineer to work in Savannah, GA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Mandatory Qualifications and Experience:
* Bachelors degree in Aerospace or Mechanical Engineering.
* Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
* Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
* Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
* Experience should be in a Production and/or schedule-driven environment.
* Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
* Strong written/verbal communication and interpersonal skills.
* Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
* Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Desired Qualifications and Experience:
* Advanced degree in engineering, or related curriculum preferred.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130183
Job Location: Savannah, GA
Duration: 1 year
Start Date: 05/06/2019
Input Date: 04/09/2019
Last Updated: 04/15/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Michael Coleman
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 09/30/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 12/05/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable.
• US Person is required
 
Job Number: 10732
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
The Airframe Process Engineer is required for 2nd shift to complete tasks as related to Aero-Structures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning. The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.
Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing produciblity review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications. Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations. The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools. The candidate must be flexible highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.


5+ years of Airframe Process Engineering required.
Must be proficient in all processes associated with Airframe Process Engineering.
Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
BS in Mechanical Engineering, Aerospace or Manufacturing Engineering required
Must be flexible in regards to work schedule and willing to support off shifts and weekends.
 
Job Number: CT47690
Job Location: Stratford, CT
Rate: 48.50
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 04/01/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10696
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/26/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Redmond, WA
Rate: $30.00 - $38.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Job Description:
- The Production Manufacturing Engineer will be responsible for working directly with a program assigned manufacturing engineer in an integrated program team (design, quality, contracts and program), to ensure all engineering/manufacturing requirements are met within manufacturing documentation.
- This will require working directly with assembly/test technicians to implement processes, and look for ways to continually improve them.
- Create work instructions, bills of materials, routings.

Skills:
Required: Microsoft Office Suite, creation of work instructions, creation of bills of materials
Desired: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 5+ years experience and/or 7+ years applicable experience
 
Job Number: 10661
Job Location: Redmond, WA
Rate: $30.00 - $38.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos.
Input Date: 03/22/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Windsor Locks, CT
Rate: $36.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
-Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.
-Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems.
-Desired experience should include working on the manufacturing of components such as, heat exchange's, pumps, fans, & accumulators.
-Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.
-Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable. US Person is required
 
Job Number: 10447
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 04/15/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Fuselage Assembly)

Description:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Unique Skills:
• Solumina and SAP experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-334
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 05/21/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546

Description:
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546
6 Month Contract

Pay rate: Open, depending on experience

**Active Top Secret Clearance required

This Manufacturing Engineer is responsible for Mechanical Integration & Test support on flight mechanical subassemblies and spacecraft integration & test activities at NGC's Gilbert Az. campus. Operations are performed in a manufacturing production environment where I&T Mechanical Engineers coordinate and oversee mechanical build and production operations performed by the technical staff.

The Ideal candidate shall possess a Bachelor's degree in Mechanical Engineering plus 2+ years of related experience in the satellite/aerospace industry.
The candidate should be capable of interpreting complex engineering drawings, schematics, diagrams, and specifications, must possess good technical writing skills, display leadership skills, and possess excellent interpersonal skills and written communication ability. The candidate should have some experience in handling delicate components and should have a good working knowledge of manufacturing processes applicable to the manufacture of spaceflight hardware or equivalent.

The candidate must have the ability to support on time and on-budget product delivery by establishing and monitoring daily production goals, recognizing and reducing/eliminating non value operations, support lean principals for process improvements, and support performance metrics regarding quality, delivery, and cost.
Additionally, the candidate should be able to recognize, coordinate and/or support the resolution of anomalies and discrepancies (TF’s & NCR’s) and work with teammates (Engineering, QA, Management, Customers) towards prompt resolution.

Experience using MES is a plus and will be required for daily activities. This position may require off hour shift work, weekend work, and extended daily hours to meet production demands. Knowledge of basic 3D Modeling, Excel, Word, Powerpoint, and Tool Control helpful but not required. An understanding of ESD, FOD, and 5S processes desired. TipQA, Windchill, MES, Costpoint, and CREOView preferred.
 
Job Number: TS8912546
Job Location: Gilbert, AZ
Rate: open
Per Diem: no
Overtime: yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/29/2019
Last Updated: 05/12/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-353
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR - $52.50/HR
Duration: Long Term Contract
Shift: 2nd Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10747
Job Location: Savannah, GA
Rate: $50.00/HR - $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 04/08/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Experience in a composite fabrication/bonding environment preferred.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-351
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Must be a U.S. Citizen.
2. Experience with MS Excel and CAD software preferred.
3. Experience with both 2D and 3D engineering.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10663
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/22/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10122
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 05/28/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
4. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
5. Investigate and assist in preparing justification for equipment and facility requests.
6. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
7. Participate in Design for manufacturing assessments with Engineering.
8. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
9. Perform audit of co-workers output based on defined requirements and procedures.
10. Must demonstrate knowledge of ME policies and procedures.
11. Incorporate Lean Manufacturing Methodology into existing and future processes.
12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
14. Support all Safety, Sustainability and Ergonomic Initiatives.
15. Aid in development and maintenance of Business Continuity Plan.
16. Author DRDI/DMT rework instructions to support effective corrective actions.
17. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
18. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10424
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
SOLUMINA_CATIA_SAP_MANUFACTURING_MECHANICAL_ELECTRICAL ENGINEERING.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10156
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Solumina and SAP experience preferred.
2. Fuselage Manufacturing and Assembly experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
6. Participate in Design for Manufacturing assessments with Engineering.
7. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
8. Perform audit of co-workers output based on defined requirements and procedures.
9. Must demonstrate knowledge of ME policies and procedures.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
12. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
13. Support all Safety, Sustainability and Ergonomic Initiatives.
14. Aid in development and maintenance of Business Continuity Plan.
15. Author DRDI/DMT rework instructions to support effective corrective actions.
16. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
17. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10594
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/11/2019
Last Updated: 05/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 1

Description:
Manufacturing Engineer Level 1

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. PERSON OR RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns.

Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 2-5 years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10605
Job Location: Windsor Locks, CT
Rate: 25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2019
Last Updated: 05/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.  

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:
  • Assist the Press Operator in running the production line.
  • Learn basic press operation. 
  • Pack finished product.
  • Operate finishing equipment.
  • Prepare tooling for production, including die inventory management and basic tooling set up.
  • Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
  • A fair and consistent pay check

Education:

• High school diploma or GED Required 



Experience:

• Prior experience in manufacturing preferred 

• Demonstrated mechanical aptitude via educational or job experience 



Skills:

• Basic computer navigation and data entry skills required 

• Basic to intermediate mechanical skills required 

• Ability to lift up to 50 lbs unassisted 

• Willingness and ability to perform in a fast paced team environment 

 
 
Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 09/11/2018
Last Updated: 12/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mech Sys Design & Anlys Engr 3 at Everett, WA

Description:
Mech Sys Design & Anlys Engr 3

Location: Everett, WA
Duration: 3+ months (Possible extension)

Job Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 62D-Hydraulic Sys, Actuation
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 3 months
Start Date: Asap
Input Date: 09/25/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Mechanical Assembler

Description:

Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in the Tempe/Chandler area. Their company has an impact on space exploration, homeland security and the nation's defense.

Every employee plays an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems faced today. We are looking for those who are ready to reach the peak of technology.

A- Primary Duties and Responsibilities:
Performs various production assembly operations on components and sub-assemblies. 
Uses visual aids, drawings and verbal and written instruction to assemble, modify, re-work or re-assemble units. 
Receives detailed instruction on new assignments.
Install sub-assemblies.
Must display competent dexterity to insure safe handling of devices and energetic matter.
All work is performed in sensitive handling areas.
Perform other related duties as assigned
 B-Primary Skill Requirements:
Experienced in using a variety of hand tools, measuring devices, microscope
Basic soldering and welding skills.

Ability to read, understand and follow written instructions.
Must display competent dexterity to insure safe handling of igniter devices.   
Basic hand tool knowledge (tweezers, pliers)   
Basic measuring tool knowledge (calipers, micrometers)   
Basic math skills.
Light assembly training.
Safety awareness training.
Safe powder handling training.

Specific Duties and Responsibilities:  

Responsibilities and duties as outlined in Section A & B above.
Work under direct supervision.
Weigh and press inert & energetic materials.
Set up and use analytical balance.
Perform inert assembly operations.
Minor cabling, potting, tinning and assembly work.
Set up and use powder press for pressing operation.
Some minor set-up capability for specific equipment.
May have some basic soldering experience



  • Three to five years minimum experience as a mechanical assembler.
  • Applicants selected will be subject to a government investigation and must meet eligibility requirements for access to classified information.  Process to be initiated immediately after transfer.
  • Cross-trained in multiple operations.
  • Must be able to read and understand manufacturing procedures. 
  • Experienced in using a variety of handtools, measuring devices, microscope.
  • General knowledge of calibration systems.
  • Must have basic soldering and welding skills.
  • Strong interaction skills also required.
  • Education Required:     High school diploma or equivalent
  • Experience Required:    1 year industry assembly work.
  • Skill Requirements:    Powder handling & weighing certification; Alcatel Leak Test Certification
  • United States Citizen


 
Job Number: 1910098698
Job Location: Chandler, AZ
Duration: 0 months
Input Date: 02/25/2019
Last Updated: 12/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTpuQAE&URLSource=cjhunter

Mechanical Assembler

Description:

Description:  



Performs various production assembly operations on components and subassemblies.  Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units.  Assignments are complex.  Receives minimal instruction on routine work and general instructions on new assignments.  May guide work of Assembler I and II.  All work is performed in explosive handling areas or where explosive devices may be present.



  • Follow and meet manufacturing build schedules
  • Manufacture sub-assemblies
  • Knowledge of condition and countability of subassemblies
  • Set-up and operate electrical test equipment
  • Must know and be able to recognize proper tooling for a specific task
  • Must be able to perform mechanical assembly and solder connections
  • Must be able to work from assembly prints, drawings and work orders
  • Train less experienced assemblers as required
  • Other functions as assigned

Qualifications:

  • Three to five years minimum experience as a mechanical assembler
  • Applicants selected will be subject to a government investigation and must meet eligibility requirements for access to classified information.  Process to be initiated immediately after transfer
  • Cross-trained in multiple operations
  • Must be able to read and understand manufacturing procedures
  • Experienced in using a variety of hand tools, measuring devices, microscope
  • General knowledge of calibration systems
  • Must have basic soldering and welding skills
  • Strong interaction skills also required
  • Lift up to 25 lbs.




     
    Job Number: 1810088112
    Job Location: Hollister, CA
    Duration: 3 months
    Input Date: 07/25/2018
    Last Updated: 12/05/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Pam Zack
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mabNAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design - Doors and Mechanisms

    Description:
    Minimum 8 years Mechanical Design experience with mechanisms and articulating doors - Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
    Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
    Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
    Minimum 10,000 hours or 5 years’ experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

    Preferred candidates will also have:
    Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros Proficiency in SmarTeam PLM database - Experience with FAA/ODA certification and component testing
    MRB experience with Hydraulics, Landing Gear, and Doors
    Hands-on experience with aircraft production support
    Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes

    Responsibilities include:
    Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
    Engage various engineering, manufacturing, and product support teams to complete designs
    Participate in design reviews - Interact with suppliers and prepare technical coordination memos
    Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
    Provide technical leadership and mentoring to junior engineers

    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
     
    Job Number: 19-143609
    Job Location: GA
    Rate: 70.00
    Per Diem: Split
    Overtime: Possible
    Duration: Year +
    Start Date: ASAP
    Input Date: 04/04/2019
    Last Updated: 04/17/2019
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Seeking a Mechanical Design Engineer who would like to learn and contribute to the Design Process. This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.

    The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is both an individual contributor and mentorship level position.

    The candidate will:
    • Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work. Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
    • Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
    • Implement and support Standard Work processes across all programs to deliver consistent results.
    • Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
    • Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
    • The candidate must be a US person:

    Education / Certifications
    • BSME or AE minimum, MSME preferred

    Experience/Qualifications
    • Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
    • Prior experience in Aerospace Structures and Engineering Fluid Component Design.
    • Knowledge of drawings, geometric tolerancing, and drawing interpretation.
    • Experience with Manufacturing techniques for limited production hardware.
    • Ability to work within a matrix organization to achieve team and program goals.
    • Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
    • A positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
    • Seven (7) to fourteen (14) years’ experience desired.

    Industry Experience:
    • Previous experience in Aerospace Component Design desired

    Optional:
    • Pro-E/CREO/Simulate preferred.
     
    Job Number: 1910096941
    Job Location: Windsor Locks, CT
    Overtime: possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 05/21/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Must Be Eligible for a Clearance.

    A strong knowledge of production methods and understanding of human factors.

    Experience with relevant applications in a defense environment.
    design/drafting experience using Pro-E/Creo 4 CAD system.
     
    Job Number: 46224
    Job Location: AZ
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 04/11/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $55.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.

    Design assignments include but are not limited to:
    - Item Installation Analysis
    - Similarity Analysis
    - Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10772
    Job Location: Savannah, GA
    Rate: $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 04/10/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer

    Description:
    Unique Skills:
    • Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis.
    • Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
     
    Job Number: 24-360
    Job Location: Savannah, GA
    Rate: $55/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 07/02/2019
    Last Updated: 07/22/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Secret Clearance Preferred

    Development, test, and validation of new and modified system designs.

    Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.

    Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.

    Coordination with suppliers, internal and external integrated product teams, management and the customer.

    3-D CATIA experience is required.

    Geometric Dimensioning and Tolerancing (GD&T) experience is required.
     
    Job Number: 1463-1
    Job Location: CA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 04/01/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Independence, OH
    Rate: $48.25/HR
    Duration: 1 year contract
    Per Diem Split: No

    ****MUST be a U.S. Citizen or Permanent Resident****
    ****MUST have a Bachelor's Degree****

    Primary Responsibilities:
    - Report to a design lead
    - Create detailed part and assembly definition drawings and models FTA's using Catia V5
    - Create associated parts list supporting part definition
    - Must be fluent with SMARTEAM PDM.
    - Support drawing release schedule.
    - Revise/maintain layouts as required under the direction of a senior designer using Catia V5
    - Hydraulic actuators
    - Oleo-Pneumatic shock struts (single and dual stage)
    - Landing gear assemblies
    - System routings (electrical and hydraulic)
    - Revise detailed parts in support of customer change requests using Catia V5
    - Develop and implement changes that will improve installation of systems routings using Catia V5
    - Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
    - Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
    - Utilize analytical skills to support proposed design changes
    - Kinematics analysis using Catia V5
    - Preliminary structures evaluation
    - Understand impact on performance
    - Weight impact
    - Tolerance stack-up evaluation
    - Prepare material for and attend design reviews

    Education:
    - Bachelor's Degree is required.
    - 5+ years of experience.
     
    Job Number: 10665
    Job Location: Independence, OH
    Rate: $48.25/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Input Date: 03/22/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Windsor Locks, CT
    Rate: $48.25/HR
    Duration: 1 year contract
    Per Diem Split: No

    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****

    Job Description:
    - Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
    - Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
    - The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
    -This is an individual contributor level position.

    Requirements:
    - 8-15 years’ experience desired.
    - Bachelor's Degree required.
    - Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
    - Previous experience in aerospace structures and engineering fluid component design required.
    - Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
    - Knowledge of drawings, geometric tolerancing, and drawing interpretation.
    - Experience with manufacturing techniques for limited production hardware.
    - Ability to work within a matrix organization to achieve team and program goals.
    - The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
     
    Job Number: 10278
    Job Location: Windsor Locks, CT
    Rate: $48.25/HR
    Per Diem: No
    Duration: 1 yr
    Input Date: 03/19/2019
    Last Updated: 06/25/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $58.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.
    - Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    - Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
    - Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10435
    Job Location: Savannah, GA
    Rate: $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/19/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $58.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
    - Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    - Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    - Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    - Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    - Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    - Design Engineer will be required to liaison with the shop on engineering issues.
    - Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
    - Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
    - Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10603
    Job Location: Savannah, GA
    Rate: $58.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/12/2019
    Last Updated: 04/15/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Houston, TX
    Rate: $48.25/HR
    Duration: 1 year contract
    Shift: 1st Shift
    Per Diem Split: No

    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****

    ****CRITICAL: CANDIDATE MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO' ****
    ****CRITICAL: DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES ARE A MUST****

    Job Summary:
    - Works multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
    - Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

    Job Requirements:
    - CRITICAL: CANDIDATE MUST HAVE A STRONG PROFICIENCY IN USING 'PRO-E\CREO'
    - CRITICAL: DETAILED KNOWLEDGE OF MANUFACTURING AND ASSEMBLY PROCEDURES ARE A MUST.
    - Candidate must also have the ability to produce and check drawings conforming to ASME Y14.5 and to support, and verify design with standard hand calculations for form, fit, function, and structural strength.
    - Knowledge of the standard design process is a must.
    - This engineer should be able to prepare reports of results of analysis and experimentation, and the ability to present design content at various design reviews must be evident.

    Education:
    - Bachelor's Degree required.
    - Strong analytical and problem solving skills are essential; Pro-Engineer/CREO knowledge for model, layout, and drawing creation; Finite element analysis tools (ex. ANSYS, Pro-Mechanica, NASTRAN/PATRAN) and able to perform linear stress analysis based on the experience, vibe and shock, fatigue; Hands on and Service mentality Design for Manufacturability.
    - Good verbal and written communication skills.
    - Excellent team skills.
    - Ability to prioritize work independently with little direction while staying on task.
     
    Job Number: 10531
    Job Location: Houston, TX
    Rate: $48.25/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Input Date: 05/23/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $70.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Qualified candidates will have:
    - Minimum 8 years Mechanical Design experience with mechanisms and articulating doors
    - Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
    - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
    - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
    - Minimum 10,000 hours or 5 years experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

    Preferred candidates will also have:
    - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
    - Proficiency in SmarTeam PLM database
    - Experience with FAA/ODA certification and component testing
    - MRB experience with Hydraulics, Landing Gear, and Doors
    - Hands-on experience with aircraft production support
    - Prior work experience with company aircraft design
    - Experience with knowledge management processes

    Competencies essential for the job:
    - Strong interpersonal skills and ability to work in a team environment and across disciplines
    - Ability to communicate technical findings and recommendations clearly
    - Humility, be a team player, help teammates
    - Passion for Auxiliary Mechanisms and Doors Design work

    Responsibilities include:
    - Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
    - Engage various engineering, manufacturing, and product support teams to complete designs
    - Participate in design reviews
    - Interact with suppliers and prepare technical coordination memos
    - Prepare engineering reports
    - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
    - Provide technical leadership and mentoring to junior engineers

    Education:
    Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
     
    Job Number: 10571
    Job Location: Savannah, GA
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/05/2019
    Last Updated: 04/19/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Location: Savannah, GA
    Rate: $70.00 - $80.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. Knowledge of Flight Test Instrumentation Mechanical Design is required.
    2. Working knowledge of CATIA V5 and SmarTeam is required.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10573
    Job Location: Savannah, GA
    Rate: $70.00 - $80.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/05/2019
    Last Updated: 05/29/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer (Aerospace Interiors) for Savannah, GA

    Description:
    Contract - Mechanical Design Engineer - for 4 year CONTRACT in Savannah, GA

    Target Hourly Pay Rate: $55/hour

    Unique Skills:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
    Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

    -Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
    -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    -Design Engineer will be required to liaison with the shop on engineering issues.

    Design assignments include but are not limited to:
    -Item Installation Analysis
    -Similarity Analysis
    -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108
    Referrals appreciated!!
     
    Job Number: PL-Interiors GA
    Job Location: Savannah, GA
    Rate: 55/per hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 4 years
    Start Date: 2 weeks
    Input Date: 07/10/2019
    Last Updated: 10/02/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Peggy
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer (Pro-E / CREO)/Manufacturing

    Description