Job Search Results

483 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/16 Monday 11:19AM Pacific Time by ContractJobHunter. )

Listings 1 - 483

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2291 - SENIOR ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Provide wiring diagram technical and configuration leadership to wiring design team.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership, coaching, mentoring and training to staff.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 8 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Experience with Mentor Graphics Logic tool is an asset.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are proficient with MS Access data entry.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating ability to adapt.
 
Job Number: 2291
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2018
Last Updated: 04/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2309 - PROGRAM ANALYST - cv, word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.

Have a bachelor's degree in Engineering or Project Management or a DEC in aeronautics or at least five (5) years of experience in aeronautics.

Have relevant technical experience in interior completion on Global Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

Are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

You drive for results.

Knowledge of aircraft structures, systems or interiors will be considered an asset.

Ideal candidate is someone that has already worked on the Global program with knowledge of SAP and BDI, BDM, MBOM.

Bilingual (English & French).
 
Job Number: 2309
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Last Updated: 03/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2312 - PROGRAM SPECIALIST - cv, word doc only

Description:
Participate at Change Board; identify and track changes that have the potential to impact customers post-delivery.

Work with multi-disciplinary teams to quantify program and
customer impacts from these changes and develop a decision matrix to assist with related Change Board decisions.

Determine a means to prioritize and mitigate these impacts; develop mitigation plans and track them to closure.

Lead a governance process that thoroughly vets and approves changes with proposed harmonization post-delivery; and serves as an escalation channel to senior leadership.

Bachelor Degree in Engineering and at least eight (8) years of relevant work experience in the aerospace industry; specific experience in change management and/or program management is an asset.

Varied experience across multiple functions in new aircraft development programs and in particular during the Type Certification and EIS phases.

Demonstrate excellent communication skills in both English and French.

Are self-motivating and can work autonomously.

Possess strong project management skills.

Are familiar with applications such as Microsoft Project, Word, Excel, PowerPoint and Outlook.
 
Job Number: 2312
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2317 - HYDRO-MECHANICAL SYS. INTEGRATOR - cv - word doc

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Experience in providing engineering support to a Final Line/ Production.

Must have experience in the definition and certification of at least one complex aircraft control system.

Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.
 
Job Number: 2317
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2320 - PROCESS ASSURANCE ENGINEER - cv - word doc only

Description:
Support the development and maintenance of process assurance plan(s).

Support the definition and development of the Bombardier Process Assurance processes, checklists and deliverables.

Plan, coordinate and participate in internal and supplier process assurance oversight activities.

Generate process assurance reports and process assurance findings as a result of the oversight activities.

Review and assess acceptability of corrective action plans addressing identified process assurance findings.

Conduct follow-up of corrective action plan implementation.

Collect measurements and provide metrics to support the development of regular visibility reports related to process assurance execution as well as oversight activity results.

Support the development and delivery of training to DADs / Integrators / Engineering Specialists in the Process Assurance methodology.

University degree in Engineering (or equivalent) with 5 to 10 years experience in the aerospace industry.

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Experience in the development or verification of aircraft systems (using ARP4754A/4761 or equivalent standard) is required.
(The candidate may also have experience in the certification, development or testing of Software or airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-178B or DO-254 or equivalent standard).

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Display strong interpersonal and professional demeanor as a business representative of the company.

Must be willing to travel to support the process assurance audit/inspection activities.
 
Job Number: 2320
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2327 - HYDRO-MECHANICAL SYSTEMS - FINAL ASSEMBLY LINE

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Have a Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Have experience in providing engineering support to a Final Line/ Production

Have 15 or more years experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Are Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips to Toronto and frequent travel between plants in Montreal.
 
Job Number: 2327
Job Location: Toronto, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 03/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2335 - PROGRAM ANALYST - cv word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.


Bachelor's degree in Engineering or Project Management and have at least five (5) to seven (7) years of experience in aeronautics.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

Are driven for results.

Are bilingual (English & French).
 
Job Number: 2335
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 05/03/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2336 - SR. ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership to team.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must have Knowledge of New EWIS Regulations.

Competencies:
You communicate clearly and openly with your team.

You embrace changes and new ideas.

You are persistent to reach your goals.

You seek out and accept feedback.
 
Job Number: 2336
Job Location: Montreal, Canada
Rate: 59.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2339 - FLIGHT DECK DESIGN & HUMAN FACTORS SPECIALIST

Description:
Define operational, functional and crew interface requirements and concepts,

Perform Analysis (task, flow, etc.),

Define Development and certification test requirements, Define simulation and prototyping requirements,

Define Test methodology, e.g. Workload, Error, Usability, etc

Perform Human Error Analysis,

Report design related issues,

Participate to problem solving,

Prepare documentation: Certification plan and report, Test plan, test card, observation grids, error log, etc

Participate and provide assistance in design reviews, liaise/interact with Flight Ops and Customers (pilots), liaise/interact with suppliers/partners, interface with certification authorities (Transport Canada, FAA, EASA), prepare technical presentations to management when requested.

Possess a Bachelor Degree in Engineering or equivalent.

Master's Degree in Ergonomics (or equivalent) is an asset.

Have at least 11 years' experience in aircraft systems development including user interface design and evaluation preferably.

Have a very good understanding of Flight Deck design standards (Mil STD, SAE ARP, ISO, etc) including aircraft systems operation and user interface design, automation principles, verification and validation methods, human reliability and safety requirements.

Have the ability to work without supervision, be organized, a team player, a self-motivated person, be Customer focused, and be able to work under pressure.

Show initiative, a strong sense of responsibility, and have an excellent technical judgment.

Must have a good knowledge of Part 25 certification process for Human Factors.

Previous experience in the definition and certification of at least one complex aircraft control system or avionics would be an asset.

Knowledge of Human or Maintenance Error Analysis is highly recommended.

Must have experience with Human Machine Interface test data analysis.
 
Job Number: 2339
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2346 - QA INSPECTORS - cv, word doc only

Description:
As senior QA person with an Inspection background you will be responsible for establishing a strong technical foundation and solid reputation working on client's products or the industry in general.

Ensure compliance with applicable regulatory requirements as prescribed in Code of Federal Aviation Regulations (FAR) and/or foreign CAA regulatory requirements

Manage, administer and implement quality and record-keeping standards, practices, policies and procedures.

Supervise the training and deployment of Standard Practices and monitoring quality consistency

Lead, direct, and coach QA aircraft inspectors in performing aircraft assurance in line maintenance, and repair and overhaul quality control and inspection activities.

Assign inspectors in the areas of aircraft, parts, and NDT inspection based upon skill, experience, and qualification of individual team members

Ensure compliance with applicable FARs

Oversee records filing system for each aircraft, for example, aircraft flight log, airframe log book, engine log book, component records, delivery records, certificate of airworthiness, airworthiness directives, and radio license

IN ADDITION TO THE ROLE OF MANAGER, OUR CLIENT DOES HAVE REQUIREMENTS FOR QA INSPECTORS

They will support the Quality Manager or accountable manager in assigned duties and responsibilities

Have at least 20 years experience in quality assurance within aerospace industry, preferably woking or having intimate knowledge of the client's product(s), and having at least 10 years in supervisory or management role in maintenance or quality.

Working knowledge of applicable Federal Aviation Regulations

Have good interpersonal skills necessary to develop and maintain effective working relationships with our client's customers, regulatory agencies and representatives, suppliers, all levels of management team and other departments.

Experience on BA 415 aircraft is an asset

Having Inspection Authorization (AI) Certificate - an AME, are are also assets.
 
Job Number: 2346
Job Location: Victoria, BC Canada
Rate: 63.00 US
Per Diem: Paid throughout contract
Overtime: Paid at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 07/06/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2350 - TOOL DESIGNER - cv, word doc only

Description:
Define standard tooling requirements and expertise for the production line.

Provide expertise in design and the use of tooling.

Analyze specifications and drawings to create more complex jigs, parts or tooling.

Evaluate and test new tooling products (tool proof).

Design tools, jigs, fixtures and templates.

Keep up-to-date with new technologies.

Design tools, jigs, fixtures and templates drawings.

Make tooling instructions.

College or University mechanical or aerospace
engineering degree or equivalent with a minimum of 11 years of relevant experience.

Previous experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Good understanding of hydraulic, pneumatic, and electrical systems.

Ability to read drawings for the purchase of tool.

Ability to design tools, jigs, fixtures and templates.

Knowledge of aeronautic tools.

Ability to communicate with supplier.

Catia V5 is required.

Catia V4 and Autocad are an asset.

Cost minded with the focus of maintain ability and ease of use.

Knowledge of Windows environment.

Must have experience in Primary and Secondary Aircraft Structures.

Previous experience with Mechanical systems and systems installations an asset.

Bilingual - must be able to read and write in both French and English and must have excellent communication skills.

IMPORTANT:

2 Positions available for Day shift (Start time = between 6:30 and 8:00AM)

2 Positions available for Evening shift (Start time = between 3:00PM and 5:00PM)

The workstations are shared between the 2 shifts, therefore
the start time for the evening shift depends on the start time
of the day shift.
 
Job Number: 2350
Job Location: Montreal, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2354 - CABINET INTEGRATOR - cv, word doc only

Description:
First point of contact for BA and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following BA processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Bachelor's degree in Mechanical Engineering with at least five (5) to seven (7) years of Client Program experience.

Have knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have good communication skills including good English writing skills, and good English and French verbal skills.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is required.

Must have good trouble shooting and organisation skills.

Must have excellent negotiation skills.

Must be detail oriented.
 
Job Number: 2354
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 03/29/2018
Last Updated: 04/12/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2355 - PROJECT CONTROL ANALYST - cv, word doc only

Description:
Project Manage cross-functional reports/projects/initiatives while maintaining strategic focus ensuring deadlines are met with the appropriate level of quality.

Manage Program-level Tier 1 milestones to ensure there is a robust plan in place and mitigation plans as required.

Monitor and control risk activities across the program.

Drive program decisions based on analysis.

Support governance activities as required.

Work with functions to expedite or resolve issues in order to help advance the overall program schedule.

Execute on aircraft level strategic initiatives depending on the needs of the program.

Be a liaison with different teams within the Client Program such as engineering, customer support, operations.

University degree in a related field (Engineering, Business) with eight years of experience in the aerospace industry.

Must have experience in schedule analysis to identify critical paths and gaps.

Have a basic technical understanding of an aircraft such as aircraft design, system design, certification, manufacturing and/or aircraft operation.

Must be bilingual - have excellent communication skills: verbal and written (in both English and French).

Have good computer skills, particularly in PowerPoint and Excel.

MS Project would be an asset.

Working experience with A/C development is an asset.

Must have excellent troubleshooting and problem solving skills.

Knowledge of the client's aerospace engineering system is an asset.

Have the ability to get things done.

Have previous experience in project/program management; a PMP would be an asset.

Have excellent problem solving skills.

Can influence others without formal authority.

Can build rapport quickly with various stakeholders.
 
Job Number: 2355
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

8 Aircraft Stress Engineers - Composite Airframe

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment (rapid prototyping environment or concept aircraft experience a plus).
MUST have a good Composites Primary Airframe Structures background.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $70-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 12-months+
Start Date: ASAP
Input Date: 07/06/2018
Last Updated: 07/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

7 Aircraft Stress Engineers with Composites

Description:
7 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 07/06/2018
Last Updated: 07/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work.
• Design new mechanical parts, assemblies and installations defining aircraft modifications.
• Perform analysis and substantiation of new parts and installations.
• Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications.
• Provide engineering checks of data produced by peer groups or other project participants.
• Provide technical support during manufacturing and installation of aircraft modifications.
• Interface with customers, suppliers and other project stakeholders pertaining to modification projects.
• Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures.
• Provide statements of work, cost estimates, completion schedules and other project administrative inputs.
• Practice safety-conscious behaviors in all operational processes and procedures.

Qualifications:

• B.S. in engineering or related scientific field. Equivalent experience may be substituted.
• Three (3) years overall work experience, two (2) of which in a design engineering role.
• Must have strong computer skills and demonstrate proficiency with 2D/3D CAD systems and MS Office programs.
• Must have strong knowledge of aircraft mechanical/structural design processes, materials, fabrication methods and aerospace hardware.
• Must possess working knowledge of substantiation techniques and FAA regulatory requirements.
• Must be able to effectively utilize aircraft continued airworthiness data.
• Must be organized and an effective project manager, presenting good communication skills and a professional appearance. Preferred:
• Knowledge of aircraft interiors, composites and entertainment systems.
• Experience with Product Lifecycle Management (PLM) software.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41685
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Minneapolis, MN

Description:
STS AeroStaff Services is hiring Aerospace Engineers in Minneapolis, Minnesota.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform a variety of engineering work in designing, constructing, and testing aircraft components, the majority of which are manufactured from composite materials
• Develops and supervises the design/repair of aircraft composite and/or sheet-metal components used on a fleet of aircraft made up of multiple aircraft manufacturers
• The successful candidate serves as an engineer driving commercial aircraft component repair compliance projects
• This position works very closely with component engineering, fleet engineering, internal shops, external vendors and MRO customers
• Reviewing data and recommending/implementing changes, as required, to improve aircraft reliability
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected fleets
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation (i.e. Fleet Briefs, Quarterly Business Review, and applicable monthly reports)
• Revising/developing numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Minimal travel is required to support the programs (less than 10%)
• This position will focus on composite & sheet-metal component structures of an aircraft
• Areas of knowledge will include composites, sheet metal, hydraulics and electrical systems
• This position reports to a lead engineer and the Manager of Component Engineering
• This position is stationed in MSP hanger facilities

Qualifications:

• Bachelor’s Degree in Engineering with a minimum 10+ years’ aviation related experience, or Master’s Degree in Engineering with 1-3 years’ aviation related experience, or Ph.D. Degree in Engineering
• Must have a high level of understanding of composite structural analysis techniques, with focus on component maintenance and repair design
• Must have a background in stress analysis and solid-modeling
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are desired
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Work is performed without appreciable direction
• Considerable latitude is provided in determining technical objectives of assignment
• A wide knowledge of other engineering related disciplines is also desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity
• The winning candidate must be an excellent orator

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41510
Job Location: Minneapolis, MN
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/12/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Electrician - FL - O/M

Description:
Chipton-Ross is seeking an Aircraft Electrician located in Jacksonville, FL

RESPONSIBILITIES:
This posting is only for F-16 Electrical and Environmental experienced candidates.
Preferred 10 plus years' experience on the F-16.
Must be able to perform flight line operations.
Must be able to perform operational functional test

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-limited travel

 
Job Number: 168536
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 MONTHS
Input Date: 02/07/2018
Last Updated: 07/16/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Aircraft Electrician - Interim secret

Description:
PDS Tech is seeking an Electrician/Avionics Mechanic  for an open position in Jacksonville, FL. 

 
High School Diploma or GED
This posting is only for F-16 Electrical and Environmental experienced candidates. 

Preferred 10 plus years experience on the F-16. 

Must be able to perform flight line operations. 

Must be able to perform operational functional test
 
Job Number: 1810081150
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 02/02/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dkPlAAI&URLSource=cjhunter

Aircraft Electrician 3

Description:
PDS Tech, Inc. is seeing an Aircraft Electrician 3 in Moss Point, MS.

Description:
The aircraft electrician is responsible for lay out, fabrication and installation of electrical wiring or coaxial cables on the aircraft.
This position also requires the individual to perform tests and troubleshooting on electrical systems for conformance
 to specifications. 
 Performs repair, removal, and reinstallation of wiring as necessary.

 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:

  • Installs and repairs electrical wiring and/or cable on aircraft in adherence to established specifications.  Cuts and strips wire, terminates and insulates connections, and performs all other duties necessary in the installation process
  • Attaches wire to complicated electrical systems, fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder.
  • Some structure experience is preferred to perform tasks such as LRU tray and LRU installation, ground strap installations, with minor bracket hardware and bond installations.
  • Read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.
  • May monitor and verify quality in accordance with statistical process or other control procedures

 
 
 
 
      
Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:
  • Experience installing and routing aircraft harness assemblies
  • Experience stripping and crimping wire terminations
  • Experience using common hand held and electrical testing tools

PFT and Audio Hearing Exam required.



 
 
Job Number: 1810082643
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 03/06/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002e0dOAAQ&URLSource=cjhunter

Aircraft Electrician 3

Description:
PDS Tech, Inc. is seeing an Aircraft Electrician 3 in Moss Point, MS.

Description:
The aircraft electrician is responsible for lay out, fabrication and installation of electrical wiring or coaxial cables on the aircraft.
This position also requires the individual to perform tests and troubleshooting on electrical systems for conformance
 to specifications. 
 Performs repair, removal, and reinstallation of wiring as necessary.

 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:

  • Installs and repairs electrical wiring and/or cable on aircraft in adherence to established specifications.  Cuts and strips wire, terminates and insulates connections, and performs all other duties necessary in the installation process
  • Attaches wire to complicated electrical systems, fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder.
  • Some structure experience is preferred to perform tasks such as LRU tray and LRU installation, ground strap installations, with minor bracket hardware and bond installations.
  • Read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.
  • May monitor and verify quality in accordance with statistical process or other control procedures

 
 
 
 
      
Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:
  • Experience installing and routing aircraft harness assemblies
  • Experience stripping and crimping wire terminations
  • Experience using common hand held and electrical testing tools

PFT and Audio Hearing Exam required.



 
 
Job Number: 1810082645
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 03/06/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002e0ddAAA&URLSource=cjhunter

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/23/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B6tAAE&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Technician

Description:
General Summary: 
The Aircraft Technician works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems.
 
Duties and Responsibilities:
  1. Performs scheduled and unscheduled inspections, maintenance, and repair of airframe and powerplant systems and components per acceptable methods, techniques, and practices. 
  2. Documents work performed in accordance with Regulatory and Repair Station/Quality Manual policies and procedures.
  3. Demonstrates proficiency with the methods, techniques, practices, tools, and equipment used during aircraft maintenance.
  4. Identifies, protects, and preserves piece parts and articles undergoing maintenance in accordance with RSM/QCM and company policies and procedures.
  5. Assures parts, products and materials that are installed meet regulatory requirements.
  6. Performs assigned work in a safe effective manner while practicing good housekeeping in accordance with company and regulatory requirements.
  7. Provides detailed turnovers when maintenance is left unfinished prior to shift changes 

Education, Work Experience, Certification and/or Licensure:
  1. High School degree or equivalent required.
  2. Experience in FAR Part 145 Repair Station environment maintaining general and/or business/corporate aviation aircraft.
  3. A&P Certification required in accordance with 14 CFR Part 65 from a FAR Part 147 School.
  4. Current passport and driver’s license or ability to obtain both.
  5. Experience with 14 CFR Part 43 required.
  6. Familiarization with 14 CFR Parts 91,135, and 145 preferred.
     

Knowledge, Skills and Abilities:

  1. Working knowledge of maintenance software (i.e. Quantum, Corridor, and/or SAP), Windows operating systems and Microsoft office products.
  2. Thorough knowledge of aircraft maintenance requirements and inspection procedures and practices.
  3. Excellent oral and written communication skills.
  4. Strong attention to detail and accuracy.
  5. Ability to work under pressure including time constraints and challenging situations.
  6. Ability to read work orders, blueprints, diagrams, manuals and process specifications, follow sequence of planned operations.
  7. Ability to work extended hours and travel to off-site locations requiring overnight stays with little notice as required.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties.

Pull, push, carry, lift or move materials/people/items/equipment weighing 50 lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties
 
Job Number: 1710069936
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/30/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CoeOAAS&URLSource=cjhunter

Assembler A (10) - CA

Description:
Chipton-Ross is seeking10 Assembler A's for openings in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar panels for space applications. Essential Duties and Responsibilities:
- Perform hand soldering, wire harness assembly and component bonding
- Complete administrative functions relating to accurate documentation
- Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and associated tools
- Adheres to established company policies and procedures, paying special attention to safety regulations
- Demonstrated experience using a computer to look up and record information (Excel)
- This position requires the ability to work first or second shift
- Ability to read blueprints, schematics, and work instructions
- Familiar with soldering, wire harness assembly and component bonding
- Reliable, mechanically inclined, detail orientated
- Ability to work in a team atmosphere and displays a positive attitude
- Effective verbal and written communication skills

REQUIRED EXPERIENCE:
- Polymeric Application (NASA-STD-8739.1A)
- Soldering (NASA-STD-8739.3)
- Crimp & Wire Routing (NASA-STD-8739.4)

ADDITIONAL EXPERIENCE:
- Experience in electronics and electro-mechanical assemblies
- Experience in manufacturing assembly related work
- Trade skills training or manufacturing experience
- Familiar with Microsoft Applications
- Familiarity with solar cell and solar panel manufacturing processes
- Experience reading detailed assembly drawings and understanding the basics of geometrical dimensioning and tolerance (GDT)
- Knowledge of Lean Mfg. ISO9001 and AS9100 concepts and practices.

EDUCATION:
High school diploma or GED, technical school.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

WORK ENVIRONMENT:
- Work overtime as required
- Must be able to lift a minimum of 35 lbs.
- Must wear a smock, hair cover, and gloves during work
- Excellent manual dexterity to manipulate and move parts and hand tools needed for performing the job
- Requires accurate visual acuity
 
Job Number: 168264
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 01/30/2018
Last Updated: 07/16/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Assembler B

Description:
PDS Tech is seeking an Assembler for an open position in North Charleston, SC. 
  • Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
  • Select correct parts, materials, tools, assemblies, standards, hardware, etc.
  • Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
  • Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Company procedures.
  • Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
  • Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
  • Read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
  • Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs

High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience. (Must have GED or HS)

Ability to perform the following requirements:



• Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension

• Contact with sealants and solvents, exposure to noise, working on elevated platforms

• Use personal protective gear for face, eyes, ears, hand, and arms as required. 

• Pass visual acuity and color perception tests

• Read, write, and comprehend the English language

• Handle, use, and dispose of hazardous material

• Obtain & maintain training certifications as required to support assignment responsibilities

• Occasional (1 to 3 hrs) finger manipulation

• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs

• Frequent reaching overhead (3 to 6 hrs)

• Frequent walking on flat surfaces

• Frequent standing flat or uneven surfaces

• Frequent balancing on a ladder, steps, or uneven surfaces

• Occasional climbing on 3-12 ft ladders or stands

• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls

• Occasional contact with metals

• Exposure to plastics and solvents to atmospheric conditions

• Frequent exposure to noise
 
Job Number: 1810081426
Job Location: North Charleston, SC
Duration: 6 months
Input Date: 03/08/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dvptAAA&URLSource=cjhunter

Structures Assembler B (100) - SC

Description:
Chipton-Ross is seeking 100 Assemblers B's located in North Charleston, SC.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Client procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead. Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.

ADDITIONAL REQUIREMENTS:
Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise

EDUCATION:
Accredited High School Diploma/GED and typically 1 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
FULL TIME/VARIABLE SHIFT
- Candidates will be required to be available to work Mon - Sun with flexible hours based upon the factory.
- On assigned days, candidates may be assigned to work up to 12 hours per day; hours will be determined based upon business needs
- Candidates will be assigned to work up to 40 hours per week; hours will be determined based upon business needs

MISCELLANEOUS:
Attend and pass an Assessment prior to start date. Failure of class may be cause for assignment termination.
 
Job Number: 168679
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 03/07/2018
Last Updated: 07/16/2018
Firm Name: CHIPTON ROSS
Attention: Christopher Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Requirements:
3-5 years aircraft sheet metal assembly - preferably large structures.

Must have heavy background of sealing, drilling and countersinking.

Need at least some experience building the structure of the aircraft - not exclusively MRO experience.

First three days will be spent obtaining Client Certifications.

Manager will review resumes and provide disposition - no interview.
 
Job Number: FD-596762KS
Job Location: Wichita, KS
Rate: $28.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 3 Months
Start Date: 3/19/2018
Input Date: 03/07/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanics (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Looking for resources interested in possible contract to direct.

3-5 years aircraft sheet metal assembly - preferably large structures.

Must have heavy background of sealing, drilling and countersinking. Need at least some experience building the structure of the aircraft - not exclusively MRO experience.

First three days will be spent obtaining Client certifications
Manager will review resumes and provide disposition - no interview
 
Job Number: FD-589944KS
Job Location: Wichita, KS
Rate: $28.00/HR
Per Diem: Possible
Overtime: Possible
Duration: 3 Months then possibly Direct Hire
Start Date: 3/12/2018
Input Date: 03/13/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation NDT Technicians - Aguadilla, PR

Description:
STS AeroStaff Services is hiring Aviation NDT Technicians in Aguadilla, Puerto Rico.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Work at all zones and locations of the aircraft structure through limited access holes, such as fuel tanks, nose compartment and tail cone; be able to work in a height –to access vertical stabilizer, rudder tip etc.

Qualifications:

• Must have Eddy Current-HF and LF, Dye-Penetrant; advantage if experienced in Magnetic Particle and/or Ultrasonic and/or X-Ray
• Good communication skills in English and Spanish, both oral and written
• Availability to travel abroad

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41713
Job Location: Aguadilla, PR
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Procurement Analysts - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aviation Procurement Analysts in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Analysts provide direct technical support to Line, Base, Engine, and Component Maintenance organizations to ensure the provision of safe, compliant, and cost effective equipment, which is necessary for aircraft reliability and on time performance. Candidates for this position need to have past technical experience working in aircraft maintenance, machine shop, or ground support equipment as an AMT, Machinist, GMT or Engineer. Possession of Airframe and/or Powerplant licenses is desirable, as is a college degree.

Qualifications:

• 8-10 years of experience. Airframe and Power-Plant license with 5+ years aviation related experience or
• Avionics Certificate with 5+ years of aviation related experience or
• Bachelor’s or Master’s Degree in Aeronautics or Engineering with 5+ years aviation related experience or
• 7+ Years of Aircraft Tooling Experience including tool management, procurement, and allocation
• Prior leadership position
• Aircraft Tooling experience
• SAP training
• Ability to read and interpret AAs, SBs, ADs, wiring diagrams, AMMs, CMs, EMs and other technical documents

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41531
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 12/11/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFLAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers

Description:
*Must have a degree and be able to obtain security clearance
* DOORS & Agile Methodology Background
* Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft.

Please email resumes: mmccarthy@pdstech.com
 
Job Number: BO-MO-Avionics
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/06/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 07/16/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - TEMPORARY

Description:
Designers/Drafters work with design engineers to translate concepts into fully documented designs. Responsibilities include development and maintenance of 3D models and detailed drawings. Applications include cockpits and instruments for flight simulators.
Qualifications
•Minimum of 4 years’ experience developing 3D models and detailed drawings
•Experience using SolidWorks and AutoCAD
•Ability to work in a collaborative environment to develop innovative solutions
•Working knowledge of ASME drafting standards including Geometric Dimensioning and Tolerancing
Desired Qualifications
•Associates Degree in Engineering or equivalent training
•Advanced SolidWorks training
•Experience using SolidWorks Enterprise Product Data Management (EPDM)
•Design/drawing checking experience
•Familiarity with aircraft cockpit systems
 
Job Number: 127478
Job Location: Broken Arrow, OK
Duration: 6 months
Start Date: 04/03/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

CNC Grind OD/ID - MI

Description:
Chipton-Ross is seeking a CNC Grind OD/ID for an opening in Macomb, MI.

RESPONSIBILITIES:
The acceptable candidate shall be required to set up and operate CNC and Manual OD and ID grind equipment with minimal supervision. Grinding of splined shafts and aircraft gears holding tolerances of .0001"-.0005." Maintain proper documentation of SPC data and participate in client's certified operator program. Familiarity with lean manufacturing and continuous improvement techniques beneficial. Overtime generally required. Inspection of work utilizing certified operator program. Able to bend, stoop, stand, kneel, and lift up to 50 lbs. as needed.

REQUIRED EXPERIENCE:
Blueprint reading skills, shop math skills and proficiency in the use of a wide variety of precision measuring tools is required. 3 to 5 years' experience.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 166351
Job Location: Macomb, MI
Rate: $16 to $28.00 DOE
Duration: 6 Months CTH
Input Date: 11/10/2017
Last Updated: 07/16/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machine Operator (NC)

Description:
Sets up and operates a variety of machine tools to make parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.

Typically requires completion of a formal apprenticeship or equivalent training and experience.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Produce parts or assemblies using Conventional or Computerized Numerical Controlled (CNC) mediums, while simultaneously ensuring product and/or process quality at all levels of the manufacturing operation through monitoring/verification methodologies.

2. Concurrently perform related functions to provide complete hardware in accordance with engineering specifications (e.g., operating multiple machines simultaneously, deburr part surface, milling, drilling, boring, honing, grinding, fastening).

3. Perform routine minor machine maintenance as part of their daily work duties (e.g., replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).

4. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, moves product to the next operation within a building.

5. Support the continuous flow of product within the manufacturing process by training and assisting employees of the same or lower classification level.

6. Trains to become MVP qualified.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Requirements:
1. Setup and operate Computerized Numerical Controlled (CNC) and Conventional equipment to perform complex or precision operations in accordance with engineering requirements.

2. Activities include, e.g. operating multi-axis equipment to mill, precision bore, turn, thread, grind, sculpt/contour, etc.

3. Verifies dimensions of parts using both mechanical and electronic measurement tools. and relative to these inspection duties:
* Maintain required personal certifications.
* Perform complete inspection, including first article inspection, of procured or fabricated parts and assemblies.
* Initiate and document any non-conforming condition for Material Review Board action.
* Perform process surveillance to assure compliance with requirements.
* Prepare and maintain quality records.

Requirements:
1-3 years' experience is needed to help open up the pool

Candidates must have extensive 5 Axis experience.

Shift: All shifts are being hired for (1st, 2nd and 3rd)

Look for qualified contractors who desire to go direct with Client.

Must be able to both setup and operate CNC Machines
At least 1-3 years in the aircraft industry as a CNC Machine Operator.

AFP experience will be highly considered.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-599584NC
Job Location: Kinston, NC
Rate: $33.00/HR
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Start Date: 03/23/2018
Input Date: 03/13/2018
Last Updated: 03/16/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Cabin Development EWIS AR/DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Essential Functions:
1. Plans R&D programs and recommends technological application programs to meet corporate objectives
2. Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
3. Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
4. Champions and develops innovative principles and ideas
5. Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
6. As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
Unique Skills:
The Cabin Development team: In Cabin Development, we design, engineer and certify the next generation of company cabin interiors. As an EWIS AR for Cabin Development, you will:
• Review and approve engineering designs for EWIS compliance aspects
• Interact and coordinate with FAA/DERs/ARs during a certification project
• Coordinate, complete and track certification tasks
• Write/review/approve certification plans, test plans, test reports and prepare related paperwork and forms.

What you'll bring to the team:
• Preferably, you will have been an Authorized Representative (AR), a Company AR at another company or an FAA Delegated Engineering Representative (DER)
• Knowledge and understanding of 14CFR - Part 21, 23, 25, 91, 135
• EWIS Certification and DER experience finding compliance with 14 CFR Part 25, Subpart H, Sections 25.1701 through 25.1733
• Expertise with aircraft interiors required • Experience with certification activities associated with Supplemental Type Certificates (STC)

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)


Education and Experience Requirements:
Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. Fifteen (15)+ years progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB incl bus justification.
 
Job Number: 373165
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 07/16/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Contract & Pricing Admin 4- Secret

Description:
PDS Tech Inc is seeking a Contract & Pricing Admin for an open position in Huntsville, AL

As member of acquire business and program business management teams, leads proposal development and negotiation and provides contracting expertise to develop and negotiate complex creative business solutions for R&D, advanced product development and new and follow-on business. Represents the company to diverse customers, including U.S. Government entities and international customers and commercial space customers. Solely authorized to exercise commitment authority in negotiating and contracting for the sale or development of complex, high performance defense and aerospace products and services including aircraft, missiles, spacecraft and launch vehicles. Administers complex contracts and agreements to ensure efficient, effective and compliant performance during the entire acquisition and product lifecycle including interpretation of contract requirements, risk management, change management, conflict resolution, delivery and payment for products and services. Establishes professional networks and customer rapport to facilitate company objectives and customer satisfaction. Provides contracts and pricing mentoring, technical and operational leadership across the enterprise. Partners in the development of business unit strategy and achievement of goals.
Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 1710076376
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 10/24/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NKtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Configuration/Change Management TSI

Description:
UNIQUE SKILLS
Aircraft Configuration Management experience required. Must be able to evaluate change requests, determine impact of change and provide guidance to ensure aircraft configuration is maintained. Must be able to clearly and concisely present technical status to leadership. Configuration Management (CM II) Certification preferred. Facilitates cross functional discussions between Operations, Engineering and Procurement. Has general knowledge of aircraft design principles

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-787-107101
Job Location: Southeast
Rate: $60.00 to $65.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
UNIQUE SKILLS
Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Client ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Client ODA projects and released engineering deliverables across the G650, G550, and G450 platforms – Previous Client experience in the above noted areas and Client aircraft platforms, as well as with Client associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 17-786-116381
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: AAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

DAR / Engineering Contractor

Description:
PDS Tech is seeking a DAR / Engineering Contractor for an open position in Savannah, GA.
 

Unique Skills:



Applicant shall be a current or prior independent DAR or a current ODA Unit member with TC or PC conformity function codes. Unique Skills: Current qualification as a FAA DAR in good standing with function code 21. In a team oriented environment, performs conformity inspections in support of Type Certification activities. As an ODA Inspection Authorized Representative (IAR) (FAA Designee) work as an integral part of the Organization assuring compliance to regulatory requirements in the performance of all ODA/FAA conformity / certification activities.



Principal Duties and Responsibilities:
Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned.



 


As our ideal candidate, you will meet the following requirements:
  •  Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

  • Other Requirements:1. Advanced degree in engineering, or related curriculum preferred2. The level of technical skill and abilities appropriate for this grade will be established by each discipline




PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
 
Job Number: 1810080754
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/25/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002disNAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer **Must Have Commerical Aircraft Seat Experience**

Description:
Summary
This position is responsible for supporting Lead Engineers and/or senior level Engineers in the research, design and substantiation of the mechanical / payloads / systems and structures design within the Mechanical Engineering department utilizing established modeling and design standards. The Engineer 4 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
Essential Duties and Responsibilities include the following with other duties as assigned:
 Assigned design tasks include but not limited to: aircraft mechanical design, mechanical/structural/payloads/systems installations, detailed assemblies and mechanical/structural/payloads/systems specifications.
 Maintains or modifies mechanical/structural/payloads/systems based on defined requirements using approved processes and tools.
 Participates in teams to support the development of designs. Supports the documentation of design implementation.
 Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
 Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
 Troubleshoots basic mechanical/structural/payloads/systems problems.
 Actively support engineering department goals and initiatives.
 Coordinate with other departments as necessary.
 Utilize internal drawing/document standards per customer or regulatory agency requirements.
 Some domestic or international travel may be required.
 Perform engineering design check and sign documents. With periodical technical guidance from mentor and lead.


 Perform engineering design analysis (such as preliminary Stress analysis, Kinematics and Dynamic Analysis), design validation (such as validate analysis models against test data) and task scope (such as work scope validation).
 Perform engineering design/analysis with minimum technical guidance.
 Provide mentoring and performance management input to PE/Functional Manager.
 Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
 Perform engineering design analysis and validation (such as engineering development testing, ballistic testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).

Supervisory Responsibilities
This job may have some supervisory responsibilities when acting in the role of Lead Engineer and as delegated by the Functional Manager.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check.
Requirements
Education and/or Experience:
BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field and 6-8 years experience or equivalent working experience (15 years minimum in an aerospace related field).
Moderate travel within the U.S. and abroad may be required to support programs.
The Structures Company is an AA/EOE.
 
Job Number: 103
Job Location: WA
Duration: 9 Months
Start Date: ASAP
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Completions

Description:
UNIQUE SKILLS
This is a Design Engineer position in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Engineer will be required to liaison with the shop on engineering issues. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
 
Job Number: 18-809-123381
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Berkeley, MO
2018-5558

Responsibilities:
• Avionics system design engineer – help define requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board functionality to this software.
• Develop throughput/memory requirements, functionality requirements, technical performance measures, risk identification and mitigation, integration activities, and test development and execution.

Qualification:
• Required – Able to obtain Interim Secret Clearance.
• Required – Intermediate proficiency with DOORS
o Experience in defining avionics systems requirements in DOORS
• Required – Intermediate skill using Agile methodology
o Experience with Agile development methodology is desired. Experience with the Atlassian tool suite is desired.
• Experience in developing integration & test plans in a large scale, complex system is required.
• Experience with aircraft health management systems is desired.
• Experience with subsystem fault detection and reporting is desired.
• Experience developing systems in a geographically dispersed environment is desired.
• Able to travel internationally as required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5558
Job Location: Berkeley, MO
Duration: 12 Months
Input Date: 03/06/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/24/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8548
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical (EWIS) Engineer -TSII

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
Essential Functions
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18-813-123182
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/22/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical design, integration, test and production support of simulation equipment. Responsibilities include development of system-level drawings, cable drawings and wire lists.

Must have an Active Secret Security Clearance.
•Bachelor’s degree in Electrical Engineering or equivalent experience in an engineering discipline
•Prefer 4+ years of directly related experience
•Cable harness design experience
•Experience with electro-mechanical devices such as switches, relays, servos and solenoids
•Analog and digital circuit design experience
•Experience using CAD tools and Microsoft Office products
•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers
•Ability to develop innovative solutions both individually and as part of a team
•Close attention to detail with a track record of producing designs that are right the first time

Desired Qualifications
•Experience using AutoCAD
•Familiarity with aircraft cockpit systems
•Experience using Programmable Logic Controllers
•Simulation equipment experience
•Circuit board layout experience
 
Job Number: 127187
Job Location: Broken Arrow, OK
Per Diem: No
Overtime: No
Duration: 6 months
Start Date: 03/19/2018
Input Date: 03/14/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: David Dodson
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The primary design work will be in the areas of analog, digital, and power conversion circuitry used in commercial and military aerospace products.


You will interact with key colleagues and stakeholders in multiple disciplines and functions, including board design, hardware design, systems engineering, software development, program and project management, etc.


In addition you will :
• Design for safety, testability, and manufacturability
• Define Hardware architecture
• Select electrical components for rugged environments
• Schematic capture
• PCB area estimation, power dissipation, component stress
• Troubleshoot analog and digital circuits
• Perform and document root cause analysis
• Design Failure Mode Effect Analysis (DFMEA)
• Perform Circuit Worst Case Analysis
• Perform Electrical simulation
• Perform Design to cost analysis
• Support PCB design with EMC and manufacturability guidelines
• Support mechanical design, software, test engineering, and manufacturing
• Support qualification and acceptance testing
• Support lifetime testing, EMC, electrical pulses, ESD
• Sensor interface design (tachometers, accelerometers, synchros, etc.)
• Design for rugged, safety-critical environments

Role Summary/Purpose :

As Lead Engineer, Electronic Hardware Design for GE Aviation's well-established and highly successful global Avionics & Airborne Electronics business, you'll provide technical expertise to support development of embedded Avionics products, project execution and design support.

This is soup-to-nuts development of new state-of-the art aircraft components.
Qualifications/Requirements :
• BS Electronic Engineering or Electrical Engineering from an accredited university or college
• 2 years of experience designing analog and digital hardware for airborne or automotive applications
• 5 years of Engineering experience

ELIGIBILITY REQUIREMENT :
• This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment
Desired Characteristics :
• Understanding of analog, digital, and power theory
• Familiarity with Electronics Lab test equipment, and test methods
• Capable of developing and writing specifications in an engineering environment
• Expertise with PSPICE CAD design tools
• Familiarity with design, test and analysis tools and systems
• Development to DO-254 and DO-160 standards
• FPGA design experience
• DC to DC converters design experience
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to influence others and lead small teams
• Lead initiatives of moderate scope and impact
• Ability to coordinate several projects simultaneously
• Effective problem identification and solution skills
• Proven analytical and organizational ability
 
Job Number: 7671
Job Location: Pinellas Park, FL
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 2 weeks
Input Date: 03/08/2018
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Johnathon Williams
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/854-1500
Fax Phone: 813/854-1605
Website: www.bentleygr.com

Electrical Design and Aircraft Interior Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-777-110701
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes:
• Entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
• AutoCAD, CATIA V5 and SmarTeam experience preferred
• Take ownership of deliverables produced & their quality.
• Coordination with the other Engineering disciplines, client and vendors.
• Experience with leadership/program management on a design program.
• Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements :
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-194
Job Location: Savannah, GA
Rate: $65 to $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
JOB SUMMARY

Electrical Engineer Reports to the Engineering Manager and a member of a given integrated product team, the Electrical Engineer will participate in the development of new aircraft system designs, modifications to existing designs, and new customer introductions.

JOB RESPONSIBILITIES

• Responsible for the design assigned including manufacturability, assembly, and meeting cost and weight targets
• Responsible for Bills of Material
• Responsible for following up/communicating with purchasing, prototyping, testing, and manufacturing to ensure high quality of design.
• Detail design of electrical integration into aircraft cabin monuments
• Design for manufacturability and assembly
• The design and detail modeling of a variety of monument components in order to meet the program requirements
• Production detail design and support development
• Delivery of detail design into BOM
• Ability to make trade-offs to yield optimum results, achieving cost, weight, functionality and reliability goals
• Managing and meeting cost and weight targets
• High attention to details in the design
• Communicating effectively and professionally with customers and suppliers
• Participating in Design Reviews throughout each phase of the New Product Introduction process
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Following and contributing to the development of the Best Practice guidelines as laid out in Quality documentation
• Checking engineering packages
• Generating and/or revising specifications
• Participating in the validation of the product (using such methods as prototyping, test, DFMEA)
• Detail design of work packages
• Coordinate and consolidate electrical design from various product sites
• Good communication and leadership skills
• Travel up to 10% both domestically and internationally
• Any other reasonable engineering related duties

• Bachelor's degree in Engineering from a four-year college or university; and three-to-five years related experience and/or training; or equivalent combination of education and experience.
• MS Word, Excel and Outlook
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/02/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Cabin Systems)

Description:
• Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and System. This includes:
o Cabin interior monuments and Seats
o Cabin Management System
o Cabin Entertainment System
o Cabin Lighting and Cabin Switch Controls
o Telephone System
o Satellite communications
o Water System and Waste System
o EWIS

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad engineer experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-208
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****


Description
Researches and designs electrical systems for integration into various fixed wing platforms. Interpret customer requirements to research, develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Ability to work under little or no supervision.
- Familiarity with SAE AS50881 design guidelines.
- Understanding of ANSI/ASME Y14.100 or related design and drafting standards.
- Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis).
- Ability to create and review all electrical drawing types (schematics, cable harness, etc).
- Experience with AutoCAD or similar 2D design software tools.
- Demonstrated previous success working in a team based environment to meet objectives.
- Strong communication skills, both oral and written
- Active DoD secret level clearance.

Desired:
- Familiarity with C130 or other fixed wing aircraft.
- Experience with programming environments Labview and/or Matlab.
- Experience with engineering change process and/or configuration control process.
- Experience with Catia V5 or other modern 3D parametric modeling program.
- Experience with Teamcenter PLM software.
 
Job Number: 8749
Job Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Input Date: 03/13/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Loads Analysis Engineers - Many Needed

Description:
**Must be degreed
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis

*Email resumes to mmccarthy@pdstech.com
 
Job Number: BO-OK-Loads/ELE
Job Location: Oklahoma City, OK
Rate: $68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 06/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
This position is for an engineer that will perform wiring design and integration tasks associated with the Electrical Systems. This position will report directly to the Manager, Electrical Wiring Design.

Experience:
Seeking design engineers with experience in the creation and maintenance of aircraft systems wiring diagrams, parts lists, and electrical harness drawings. This involves detailed understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level.
The potential candidate must be capable of working independently, must possess excellent coordination skills, and must work well in a multi-functional team environment.

Duties and Responsibilities:
Background and demonstrated ability is required in the technical areas listed below.

­ Electrical Wiring and Harness Design
o Wiring standards and ‘best practice’ design
o Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
o Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
o Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
o Development of configuration managed, electrical harness design packages
o Parts lists, bill of materials, parts and standards callout
o Fabrication techniques for integrated wiring assemblies
o Cost, weight, and schedule trade-offs
­ Wire Diagram and harness drawing generation
o Interpretation of system interface control data to conceptual schematics
o Evolution of conceptual schematics into aircraft wiring information
o Use of wiring design tool to generate wiring diagrams and harness drawings
­ System integration as it applies to complex wiring assemblies
o Good overall working knowledge of aircraft electrical/electronic systems
o Implementation of wiring and harness level system separation to avoid common cause failure modes, including electrical signal and power separation
o Databus and digital equipment interface considerations

Education, Work Experience, Certification and/or Licensure:
­ BSEE or equivalent and minimum of 5 years applicable work experience
­ Experience with IGE-XAO, Mentor Graphics, or similar wiring design tool
­ Good working knowledge with Teamcenter, Microsoft Office suite, and SAP
­ Experience with Catia V5 is a plus
­ Experience with electrical harness routing and installation requirements is a plus
 
Job Number: 28-020
Job Location: Greensboro, NC
Rate: $45-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer III - (MO)

Description:
INTERIM SECRET, NOT REQUIRED TO START.

Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board functionality to this software. The work will include development of throughput/memory requirements, functionality requirements, technical performance measures, risk identification and mitigation, integration activities, and test development and execution. Experience in defining avionics systems requirements in DOORS is a requirement Experience in developing integration & test plans in a large scale, complex system is required. Experience with Agile development methodology is desired. Experience with the Atlassian tool suite is desired. Experience with aircraft health management systems is desired. Experience with subsystem fault detection and reporting is desired. Experience developing systems in a geographically dispersed environment is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 03/06/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level \'D\' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 01/25/2018
Last Updated: 03/30/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Data Integrity

Description:
UNIQUE SKILLS
This is a Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve reviewing engineering designs of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The Data Integrity Engineer will review design work created using either AutoCAD or CATIA V5 and will ensure design standards are consistent with company standards and accepted design methods. Assignments are executed under the direction of the Structural/Mechanical Engineering Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned. Aircraft completion experience desired. Catia V5 and AutoCAD experience required. SmarTeam experience desired. Strong knowledge of aircraft cabin interior mechanical design including cabinet fabrication, materials and processes is highly desired. Experience as a design engineer creating new data for completions of VIP aircraft is a plus.
 
Job Number: 18-810-122441
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer Mechanical - 4-DoD Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Engineer Mechanical 4 DOD Secret Clearance position located in Melbourne, FL. 

Summary:

The chosen candidate will have a demonstrated ability to perform design of aircraft secondary structures.  These secondary structures include, but are not limited to, crew systems, equipment integration, equipment rack design, and electrical wire (lines) and mechanical (tubes) routing and integration . This role requires an individual with demonstrated ability to perform integration activities, as well as a demonstrated ability to prepare build-to packages utilizing 3D modeling software.
 





Active Secret Clearance Required
 

Please send your resume to epetersen@pdstech.com or call 316-448-0890. 




Qualifications


 
Basic Qualifications:
Minimum of 9 years’ experience directly related to aircraft subsystem design and integration or equivalent years of experience and education. Demonstrate experience with 3D modeling software (NX or equivalent). Active DoD Secret Clearance.

 
Preferred Qualifications:
Bachelor of Science degree in Aerospace, Mechanical, Electrical Engineering or Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university.  Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing the NX software.


 
Job Number: 1810081428
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 02/09/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dvqDAAQ&URLSource=cjhunter

Engineer Structural- Secret Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Structural Engineer 3-Secret Clearance located in Palmdale, CA.

Clearance: Active Secret clearance required to start  (investigation within last 5 yrs.)

The successful candidate shall be able to perform stress analyses of metallic and composite aircraft structures. The position requires knowledge of aircraft stress. The position will require the performance of static of metallic and composite airframe structure using classical ‘hand’ methods and also using automated methods and procedures approved for the program.  Required skills include the ability to manipulate and pull loads from the Global Loads Models, and to build and apply loads to local breakout models. The stress analyst shall ensure that designs meet program requirements for strength, durability, and damage tolerance, and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives . The analyst should work well in a team environment and create high quality analysis reports and presentations.
 

Basic Qualifications:



  • 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD
  • Proficiency with NASTRAN, Patran, FEMAP, and Matlab


  • Complete understanding of structural analysis techniques, concepts and practices
  • Excellent written and verbal communication skills
  • Must be a self-starter and be able to handle multiple tasks in parallel

Active DOD Secret clearance with an investigation within the last 5 years is required.

Preferred Qualifications:

  • Experience with layout sizing and structural integrity evaluations of primary and secondary structure
  • Experience in composite structural test applications
  • Advanced knowledge in durability and damage tolerance analysis methods
  • Experience working in a liaison engineering environment, resolving MRB issues
  • Experience working on Special Access Programs
  • Experience working on military aircraft

 
 
Job Number: 1810082378
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 03/08/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dzkMAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Interior Designer

Description:
Engineering Contractor

Location: Savannah, GA
Pay Rate: $54.76/hr - $56/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
High school diploma or GED
 
Job Number: 8552
Job Location: Savannah, GA
Rate: 54.76 - 56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Aviation Quality Inspectors - Melbourne, FL

Description:
STS AeroStaff Services is hiring Entry Level Aviation Quality Inspectors in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Inspect aircraft assembly activities and products for conformance with government and company standards and specifications. Report deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers.

Job Duties:

• Inspects the installation and operation of aircraft parts and equipment
• Inspects work areas and practices to detect potential unsafe conditions
• Read and understand the applicable technical information from Work Instructions, Drawings, Standards and Specifications
• Use of inspection tools and test equipment applicable to the activity
• Perform necessary work registers as requested by production and quality documents
• Prepare technical reports of quality deviations for engineering analysis
• Support process of preventive and corrective actions plan analysis

Education:

• H.S. Diploma or GED
• Desired: A.S. degree in Aviation
• Preferred: A&P License

Experience:

• Technician Role requiring basic skills to perform most of the standard tasks within the technical area assigned to
• Generally 0-3 years’ of experience in area of responsibility experience as an aircraft A&P Mechanic plus two years inspection experience in a production environment
• Desired: Prior Inspector work experience with aerospace quality systems that meet FAA requirements

Knowledge, Skills & Abilities:

• Ability to read technical documents and interprets the information - metric system
• Understand procedures, acting in problem solving, suggesting improvements
• Safety and operating procedures for power-on aircraft
• Application and use of precision measurement instruments and test equipment
• Team worker
• Logic thinking
• Detail oriented
• Employees will be subject to the random drug and alcohol testing under FAA regulations
• Will be subject to an annual vision test

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41746
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level IT Operations Analysts - Melbourne, FL

Description:
STS AeroStaff Services is hiring Entry Level IT Operations Analysts in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide technical support to the Flight Ops’ Business Operations team. Develop and implement automations and software integration as needed. Take part in the implementation of policies, procedures, systems and tools in order to improve company’s efficiency and streamline processes.

Job Duties:

• Learn the Flight Operations’ invoice and others processes and develop various Automations as directed to assist with accuracy and speed of Data entry for the processes
• Create Software Integration and report automation as directed for process improvements and time and cost saving
• Connect different business software for data upload/download and sync using Programming Languages and other IT tools as necessary
• Database Creation and support for management of large amount of complex interrelated sets of data
• Write and/or update Standard Operating Procedures (SOPs) for all activities assigned
• Assist with specialized financial and cost analysis (e.g., usage, volume and variance analysis) and prepare related management reports
• Support the preparation of management reports
• Participate in the implementation and operation of company’s planning and reporting software (on ad-hoc basis or as part of structured projects)
• Assist with analysis and recording of a high volume of invoices and create various related reports
• Assist with the company lean and continuous improvement processes
• Assist with the implementation of policies and procedures
• Review financial and internal controls to determine whether such policies and procedures are adequate to meet management objectives and newer challenges
• Other Ad-hoc requests

Required:

• Software / Computer Degree with Business Experience and knowledge OR Bachelor's Degree with a major in Accounting, Finance or related Business area and programming experience and knowledge
• Ability to perform well under pressure, successfully completing tasks with deadlines
• Must be able to work well with others, strong interpersonal skills
• Able to work in a fast paced team environment with on the Job training
• Excellent time management, planning skills and attention to detail
• Strong Data Analysis and Interpretation ability
• Strong MS Excel skills are required and frequently used on the Job
• Must be able to effectively create and modify linked Cells, Ranges and Sheets
• Create and modify Conditional Formatting, Tables, Pivot Tables, Formulas, Various Charts and Pivot Charts
• Knowledge and/or Experience of Programming/Scripting languages and techniques for creating data entry automation and Software Integration
• Experience of Visual Basic, AutoHotkey, SAP GUI, Guixt, Access and SQL will be preferred
• Ability to perform transactional tasks accurately, while following established processes and guidelines with minimal supervision
• Knowledge of financial and analytical business principles, practices and procedures

Desired:

• Experience of Financial or Business Operations analysis
• Strong MS PowerPoint skills
• SAP familiarity
• MS SharePoint familiarity
• Experience of purchasing, order placement and dispute resolution
• MS Visio familiarity
• Adobe Acrobat (Writer) Pro familiarity; moderate JavaScript skills are a bonus
• Familiarity with SalesForce.com
• Experience in performing general admin support activities related to aircraft programs
• Experience of assisting or participating in a Lean and/or Continuous Improvement Program

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41696
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineering Contractor

Description:
UNIQUE SKILLS
Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-771-109481
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flammability Engineer

Description:
JOB SUMMARY

Flammability Engineer reports to the Engineering Manager the Flammability Engineer responsible for review of engineering designs and development of flammability substantiation data to demonstrate compliance with regulatory and customer requirements. Specifically, this role is to support the Interior Structures Business Unit in the qualification, testing and certification of major aircraft interior commodities, and provide technical support for ongoing continued airworthiness. Role may include complex assignments such as managing several projects simultaneously in a schedule intensive environment.

JOB RESPONSIBILITIES

• Contributes to successful project completion by participating in the review of designs, regulatory/customer requirements, and qualification plans while developing substantiation data documentation to support project goals.
• Prepares flammability test drawings, test plans, test reports, and qualification documents.
• Reviews engineering design changes and prepares change-based documentation for flammability compliance.
• Candidate is required to possess a working level knowledge of fire property regulations including; 14CFR 25.853, and OEM requirements for smoke and toxicity.
• Candidate is required to possess a working level knowledge of FAA policy related to acceptable methods of compliance (MOC’s) for flammability.
• Supports fire properties testing including coordination for internal and external laboratory tests (Bunsen burner, Heat Release, Smoke Density and Toxicity).
• Work with customer design engineers, subject matter experts and FAA authorized Representatives to establish acceptable showing of compliance for flammability.
• Working knowledge of material qualification, process qualification, etc.
• Experience in material testing including ASTM standards testing.
• Knowledge of generating repair processes for MRB
• Experience in working with honeycomb structures’
• Basic knowledge and proficiency with team center (or related product data management system), including familiarity with aerospace drawing/document control systems for change management.
• Ability to work in a cross-functional manner with design, manufacturing, quality, supply chain, program management, and customer during product/data development to ensure all aspects are considered from the outset.
• Travel requirement – up to 10% both internationally and domestically.


• Bachelors degree from a four-year university or college and minimum of 3 years of experience that demonstrates:
o Knowledge of basic material characteristics, flammability of materials.
o Ability to interpret material and fabrication process specifications for non-metallic structure.
o Basic knowledge of composite manufacturing methods, vacuum forming, injection molding, composite materials, bonding, trim and finish.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Flight Operations 3

Description:
PDS TECH INC. is seeking Flight Operations 3 position located in Moss Point , MS.

SUMMARY:















The Flight line tech is responsible for all operations that support air vehicle ground testing, engine runs and flight operations.
 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:
  • Pre-flight and post-flight
  • Servicing engine oil, transmission oil, hydraulic fluid
  • Making track and balance adjustments
  • Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions
  • Ground handling/towing air vehicle
  • Rotor blade installation/removal
  • Power-up, power-down, subsystem checks
  • Fueling/defueling
  • Troubleshoots, repairs and services aircraft and engine systems
  • Engine run and flight operations support





 




 


























 



Qualifications

 Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:

  • Experience servicing, rework, repair, replacement of aircraft systems
  • Experience in flight line environment.

Experience using common hand held and electrical testing
 
Audio Hearing and PFT Exams required.
 




 




 











 
Job Number: 1810082022
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 02/26/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dyCfAAI&URLSource=cjhunter

Flight Operations 3

Description:
PDS TECH INC. is seeking Flight Operations 3 position located in Moss Point , MS.

SUMMARY:















The Flight line tech is responsible for all operations that support air vehicle ground testing, engine runs and flight operations.
 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:
  • Pre-flight and post-flight
  • Servicing engine oil, transmission oil, hydraulic fluid
  • Making track and balance adjustments
  • Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions
  • Ground handling/towing air vehicle
  • Rotor blade installation/removal
  • Power-up, power-down, subsystem checks
  • Fueling/defueling
  • Troubleshoots, repairs and services aircraft and engine systems
  • Engine run and flight operations support





 




 


























 



Qualifications

 Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:

  • Experience servicing, rework, repair, replacement of aircraft systems
  • Experience in flight line environment.

Experience using common hand held and electrical testing
 
Audio Hearing and PFT Exams required.
 




 




 











 
Job Number: 1810082021
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 02/26/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dyCaAAI&URLSource=cjhunter

Flight Operations 3

Description:
PDS TECH INC. is seeking Flight Operations 3 position located in Moss Point , MS.

SUMMARY:















The Flight line tech is responsible for all operations that support air vehicle ground testing, engine runs and flight operations.
 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:
  • Pre-flight and post-flight
  • Servicing engine oil, transmission oil, hydraulic fluid
  • Making track and balance adjustments
  • Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions
  • Ground handling/towing air vehicle
  • Rotor blade installation/removal
  • Power-up, power-down, subsystem checks
  • Fueling/defueling
  • Troubleshoots, repairs and services aircraft and engine systems
  • Engine run and flight operations support





 




 


























 



Qualifications

 Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:

  • Experience servicing, rework, repair, replacement of aircraft systems
  • Experience in flight line environment.

Experience using common hand held and electrical testing
 
Audio Hearing and PFT Exams required.
 




 




 











 
Job Number: 1810080951
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 01/25/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002djwZAAQ&URLSource=cjhunter

Flight Operations 3

Description:
PDS TECH INC. is seeking Flight Operations 3 position located in Moss Point , MS.

SUMMARY:















The Flight line tech is responsible for all operations that support air vehicle ground testing, engine runs and flight operations.
 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:
  • Pre-flight and post-flight
  • Servicing engine oil, transmission oil, hydraulic fluid
  • Making track and balance adjustments
  • Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions
  • Ground handling/towing air vehicle
  • Rotor blade installation/removal
  • Power-up, power-down, subsystem checks
  • Fueling/defueling
  • Troubleshoots, repairs and services aircraft and engine systems
  • Engine run and flight operations support





 




 


























 



Qualifications

 Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:

  • Experience servicing, rework, repair, replacement of aircraft systems
  • Experience in flight line environment.

Experience using common hand held and electrical testing
 
Audio Hearing and PFT Exams required.
 




 




 











 
Job Number: 1810080952
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 01/25/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002djweAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations Research Analysts - Atlanta, GA

Description:
STS AeroStaff Services is hiring Flight Operations Research Analysts in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Must work closely with Aircraft Maintenance Technicians on a daily 24 x 7 operation basis by determining parts requirements, utilizing technical manuals and documents such as IPC, CMM, MM, E.O.'s, ERA's.
• Using MIRS, originates and coordinates shop orders for in-house repair of removed parts from MRO Customers hangar and line aircraft.
• Must be able to prioritize & complete multiple tasks simultaneously.
• Must have considerable knowledge of most phases of the Maintenance operation, as well as material routing.
• Should have extensive knowledge of the ATA systems, and , SCEPTRE / SAP functionality as it relates to Inventory Management, as well as general knowledge of aircraft and engine systems.
• Makes inputs and generate daily reports on shortages and other technical problems requiring resolutions.
• Candidate should be highly motivated, self-directed, proactive, and have the ability to work effectively under pressure and time constraints.
• Practices safety-conscious behaviors in all operational processes and procedures

Qualifications:

• College graduate, A and P license, or equivalent experience in inventory management preferred.
• Should be able to master complex computer models and business processes.
• Prefer experience in aircraft record compliance, shop scheduling, warranty procedures, quantitative tracking and inventory control.
• Knowledge and understanding of inventory/supply chain/warehousing processes and procedures.
• Ability to analyze and understand technical manuals and documents.
• Should be able to interact comfortably with various levels of personnel in Maintenance and Materiel Management.
• Must be able to lift 70 pounds(very rare due to safety issues)

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41683
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 03/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 07/16/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Fuel Cell Assembly Mechanic

Description:
Fuel Cell Assembly Mechanics needed for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.
  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078608
Job Location: Everett, WA
Duration: 24 months
Input Date: 12/11/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFaAAM&URLSource=cjhunter

Industrial Engineer

Description:
General Summary:
The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:
  • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  • Collects and analyzes data and metrics and presents the information to large audiences.
  • Provides productivity planning with accompanying future strategies for improvement.
  • Develops and maintains engineered time standards.
  • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  • Develops and maintains plant standards.
  • Creates and maintains valve stream maps.
  • Plans, schedules, and prioritizes work to meet established deadlines.
  • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  • Determines and improves processes to meet production levels.
  • Schedules and sequences job plans (with ME approval) to support effective work flow.
  • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
Experience in aerospace industry in aerospace manufacturing a plus.

Knowledge, Skills and Abilities:
  • Strong analytical and innovative skills.
  • Strong work ethic.
  • Ability to multitask.
  • Ability to work under minimal supervision.
  • Detail oriented.
  • Excellent problem solving skills.
  • Ability to read and interpret engineering drawing and/or specification requirements.
  • Excellent communication skills, both verbal and written.
  • Excellent presentation skills.


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

 
Job Number: 1810082205
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 03/05/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dz7iAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
• Interior design engineering for cabin & cockpit structures, components, and trim for aircraft.
• Serve as interface between design engineering, suppliers, and production departments.

Requirements:
• Engineering degree and minimum of 5 years applicable experience.
• CATIA V5 (or equivalent) 3D modeling and engineering drawing skills.
• Knowledge of aerospace materials, fasteners, and standards, as well as basic principles of design engineering including material selection and optimization for manufacturability, cost, and weight.
• Experience with design and installation drawings for aerospace interior components such as cabinets, seats, interior panels, trim, cargo liners, tables, pocket doors, and lavatories.

Preferred Qualifications:
• Knowledge of Part 23 & 25 certification process and regulations.
• Experience with interior design (styling), ergonomics/human factors, fabrication methods, mockups, assembly techniques, component testing, and vendor interface.
 
Job Number: 28-019
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/28/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Mechanical Systems

Description:
General Summary:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems.

Duties and Responsibilities:
1. Resolves complex engineering problems related to the build of the aircraft.
2. Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required.
3. Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working.
4. Reviews, develops, and implements revised/new processes using six sigma/lean principles.
5. Provides an acceptable disposition of non-conformance of commercial mechanical systems encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects.
6. Documents how to repair the discrepancy using engineering principles.
7. Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings.
8. Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality.
9. Incorporate design changes using CATIA V5.

Education, Work Experience, Certification and/or Licensure:
1. Bachelor's degree in Engineering or related field of study.
2. Minimum of 6 years to a maximum of 20 years’ experience in the engineering field.
3. 6 years’ experience serving as a Liaison for MRB Mechanical Systems is preferred.
4. Computer proficient with experience in Microsoft Office Programs (SAP a plus).
5. Excellent written and oral communication skills.
Knowledge, Skills and Abilities:
1. Strong oral and written communication skills.
2. Strong analytical skills.
3. Strong interpersonal skills. Ability to interact with all levels of the organization.
4. Detail oriented.
5. Strong organizational skills and ability to multitask.
6. Extensive experience with Six Sigma.
7. Advanced knowledge of Mechanical Systems concepts, CATIA V5, and Standard Repair Methods (SRM).

The Structures Company is an AA/EOE.
 
Job Number: 155
Job Location: NC
Duration: 9+ Month
Start Date: March 2018
Input Date: 03/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

MRB Engineer - Technical Specialist II

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 373038
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/20/2017
Last Updated: 07/16/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Duties and Responsibilities:
1. Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes.
2. Manages and supports the implementation of enhancements to procedures, processes and operating tools.
3. Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with all other relevant procedures and communicate awareness of changes.
4. Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements.
5. Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality.
6. Participates in activities to enhance and support HACI Production teamwork, and provide an environment for all team members to participate in CI (Continuous Improvement).
7. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
8. Analyzes a variety of engineering data to help determine requirements to meet objectives.
9. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
10. Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”.

Education, Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
3. 5+ years experience in aerospace industry in aerospace manufacturing.
4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/29/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA



A Manufacturing Engineer is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems. This individual will support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Support the design, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all aircraft platforms.
Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.

Specify and implement automation equipment and processes.

Identify and assist in addressing safety issues on the manufacturing floor.

Support manufacturing production planning and coordination, execution and operations process development.

Provide production support to assemblers and leads.

Document manufacturing processes and assembly work instructions.

Design shop aids and tooling to assist production.

Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.

Collaborate with Design Engineering during prototype, development and first article manufacturing.

Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.

Experience in both analog and digital technologies as well as a background with RF.



Software Requirements:

MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
Databases, e.g. Oracle and FileMaker. Knowledge of SQL.


Required Experience:

5 to 15 Years experience in aerospace manufacturing, processing and materials knowledge.
Background in Printed Wiring Assemblies and Line Replaceable Units.
Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing.
Experience in both analog and digital technologies as well as a background with RF.
Experience with development and deployment of manufacturing automation and remaining current with technology.
Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action.
Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
Experience with process mapping and demand flow technology
Strong background in electro-mechanical assemblies.
Six Sigma Green Belt preferred.
Required Education: Bachelor's degree preferred not required.



Position: Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 120164
Job Location: San Diego, CA
Rate: 80-95k/yr
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 03/07/2018
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineers - Excellent Rates

Description:
Mass Properties - Weights Engineers

*BS Degree
*Experience with Weight Calculations & Composites
*Aerospace/Aircraft Background

**Must have an active secret clearance

**If interested please email resumes to: mmccarthy@pdstech.com or contact at: 314-720-0572 Mary Ann McCarthy
 
Job Number: Mass Prop- MO
Job Location: St. Louis, MO
Rate: $75.00-$80.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/09/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Master Technical Training Instructor

Description:
PDS Tech is seeking a Master Technical Training Instructor


Under minimum supervision, research, assist in the development, organize and deliver training curriculum. Act as an internal consultant on training issues in areas of expertise. Support training as assigned at all Company and FlightSafety facilities. Support Lead Training Instructors and mentor other training instructors as required. 

Principal Duties and Responsibilities:

Essential Functions:
  1. Conduct classroom and practical training as requested at all Company and FlightSafety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
  2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
  3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
  4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
  5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
  6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
  7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
  8. Schedule Aircraft Equipment resources as required for Practical Training.
  9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
  10. Develop and maintain Computer Based Training.
  11. Solicit, promote, and exhibit a spirit of teamwork between Company and FlightSafety. 


Additional Functions:
  1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
  2. Promote and ensure a safe training environment.
  3. Update training programs/records accordingly.
  4. Travel as necessary to conduct training.
  5. Performing other duties as required and/or assigned. 


Other Requirements:
  1. A&P, FCC, or Pilot License preferred.
  2. Instructor development training is required.
  3. If the instructor will be a member of the Company/FlightSafety Total Technical Training program, an FSI Master Technician Certification required.
  4. Expert user of PowerPoint, MSWord, and Lotus Notes.
  5. Ability to utilize media equipment.
  6. Ability to read/interpret blueprints and wiring diagrams.
  7. Ability to solve the problems between peers and subordinates.
  8. Must exhibit excellent verbal, written, and teaching skills.

Education and Experience Requirements:



Bachelors degree preferred or equivalent combination of education and experience.
Five to eight years experience in aviation industry, including relative Company experience.
Three to five years experience in training related area. 

Unique Skills:



Company Aircraft knowledge preferred. - Aircraft manufacturing and Repair Station knowledge and or experience preferred.


 
Job Number: 1710076327
Job Location: Savannah, GA
Duration: 12 months
Input Date: 10/24/2017
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NCMAA2&URLSource=cjhunter

Material Handler - Level 1

Description:
PDS Tech is seeking a Material Handler for an open position in Feura Bush, NY

Loads and unloads material within a warehouse or storage facility.
Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility.


 
May require a high school diploma with 0-2 years of experience in the field or in a related area.
Has knowledge of commonly-used practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
Typically reports to a supervisor or manager.

Special Considerations:

Lifting will exceed 30 Lbs. and/or repetitions of this or lesser weights will be significant.
Exposure to substantial machine, chemical, biological or other physical risks are anticipated.
 
Job Number: 1810079705
Job Location: Feura Bush, NY
Duration: 5 months
Input Date: 01/10/2018
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023dlaAAA&URLSource=cjhunter

Mechanical 2D and 3D Engineering Checker