Job Search Results

548 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/05/27 Sunday 04:03PM Pacific Time by ContractJobHunter. )

Listings 1 - 548

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2291 - SENIOR ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Provide wiring diagram technical and configuration leadership to wiring design team.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership, coaching, mentoring and training to staff.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 8 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Experience with Mentor Graphics Logic tool is an asset.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are proficient with MS Access data entry.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating ability to adapt.
 
Job Number: 2291
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2312 - PROGRAM SPECIALIST - cv, word doc only

Description:
Participate at Change Board; identify and track changes that have the potential to impact customers post-delivery.

Work with multi-disciplinary teams to quantify program and
customer impacts from these changes and develop a decision matrix to assist with related Change Board decisions.

Determine a means to prioritize and mitigate these impacts; develop mitigation plans and track them to closure.

Lead a governance process that thoroughly vets and approves changes with proposed harmonization post-delivery; and serves as an escalation channel to senior leadership.

Bachelor Degree in Engineering and at least eight (8) years of relevant work experience in the aerospace industry; specific experience in change management and/or program management is an asset.

Varied experience across multiple functions in new aircraft development programs and in particular during the Type Certification and EIS phases.

Demonstrate excellent communication skills in both English and French.

Are self-motivating and can work autonomously.

Possess strong project management skills.

Are familiar with applications such as Microsoft Project, Word, Excel, PowerPoint and Outlook.
 
Job Number: 2312
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2335 - PROGRAM ANALYST - cv word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.


Bachelor's degree in Engineering or Project Management and have at least five (5) to seven (7) years of experience in aeronautics.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

Are driven for results.

Are bilingual (English & French).
 
Job Number: 2335
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2336 - SR. ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership to team.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must have Knowledge of New EWIS Regulations.

Competencies:
Communicate clearly and openly with your team.

Embrace changes and new ideas.

Persistent to reach your goals.

You seek out and accept feedback.
 
Job Number: 2336
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2346 - QA INSPECTORS - cv, word doc only

Description:
As senior QA person with an Inspection background you will be responsible for establishing a strong technical foundation and solid reputation working on client's products or the industry in general.

Ensure compliance with applicable regulatory requirements as prescribed in Code of Federal Aviation Regulations (FAR) and/or foreign CAA regulatory requirements

Manage, administer and implement quality and record-keeping standards, practices, policies and procedures.

Supervise the training and deployment of Standard Practices and monitoring quality consistency

Lead, direct, and coach QA aircraft inspectors in performing aircraft assurance in line maintenance, and repair and overhaul quality control and inspection activities.

Assign inspectors in the areas of aircraft, parts, and NDT inspection based upon skill, experience, and qualification of individual team members

Ensure compliance with applicable FARs

Oversee records filing system for each aircraft, for example, aircraft flight log, airframe log book, engine log book, component records, delivery records, certificate of airworthiness, airworthiness directives, and radio license

IN ADDITION TO THE ROLE OF MANAGER, OUR CLIENT DOES HAVE REQUIREMENTS FOR QA INSPECTORS

They will support the Quality Manager or accountable manager in assigned duties and responsibilities

Have at least 20 years experience in quality assurance within aerospace industry, preferably woking or having intimate knowledge of the client's product(s), and having at least 10 years in supervisory or management role in maintenance or quality.

Working knowledge of applicable Federal Aviation Regulations

Have good interpersonal skills necessary to develop and maintain effective working relationships with our client's customers, regulatory agencies and representatives, suppliers, all levels of management team and other departments.

Experience on BA 415 aircraft is an asset

Having Inspection Authorization (AI) Certificate - an AME, are are also assets.
 
Job Number: 2346
Job Location: Victoria, BC Canada
Rate: 63.00 US
Per Diem: Paid throughout contract
Overtime: Paid at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2354 - CABINET INTEGRATOR - cv, word doc only

Description:
First point of contact for BA and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following BA processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Bachelor's degree in Mechanical Engineering with at least five (5) to seven (7) years of Client Program experience.

Have knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have good communication skills including good English writing skills, and good English and French verbal skills.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Must have design experience in cabinet assembly design and/or cabinet installation.

Experience in interiors completion Design is required.

Must have good trouble shooting and organisation skills.

Must have excellent negotiation skills.

Must be detail oriented.
 
Job Number: 2354
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 04/12/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2363 - PROJECT ENGINEER - cv, word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases.

Prepare & maintain schedules, cost control & progress reports.

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations.

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of eight (8) years equivalent experience in the aerospace industry.

Must have proven experience in project management and/or project engineering.

To be successful in the role, you need to demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

Must have a high level of communication skills in both French and English is required.

You will be given to candidates who are PMP members of the PMI (Program Management Institute).

Have knowledge of the Client Engineering System and Client Change management process would be an asset.

Bilingual - must have excellent communication skills, both written and verbal in English and French.

Must have extensive experience in project management activities (planning, schedule follow up and budget managment).

Must have knowledge on implementation of change management activities.

Working experience with A/C development is an asset.
 
Job Number: 2363
Job Location: Montreal, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2366 - PROJECT MANAGER - cv, word doc only

Description:
Create, harmonize and track compliance to various schedules required to manage the project.

Coordinate and track to ensure major Supplier/BA deliverables are available on schedule.

Manage priorities, and the communication and harmonization of these priorities.

Track Engineering Release (Drawings, Modsums, Documents, Service Bulletins etc)and compliance to associated schedules.

Coordinate Integrated Product Development Team cross-functional reviews as necessary.

Coordinate multi-site activities as necessary.

Facilitate Change Management through BA process (ECCB, DCP/PCR/EMT).

Produce governance visibility for the Project.

Actively support the Achieving Excellence (AE) departmental objectives.

Represent Engineering & Product Development at various inter-departmental meetings.

Review supplier human resources and risk management plans.

Create the Statement of Work for each development phase of the project.

Engineering degree/diploma or equivalent working experience, with 5 years+ experience in aerospace.

Familiar with Program/Project Management processes.

Sound aircraft Engineering and/or Operations experience (an asset).

Have a professional attitude and superior communication skills are essential.

Excellent organizational, time management skills, foresight, accuracy, attention to detail and commitment to objectives and responsibilities.

Have a Pro-active attitude and ability to manage multiple priorities .Self-motivated, autonomous and enthusiastic.

Ability to work willingly and independently in a fast paced, challenging environment.

Have effective problem solving skills with ability to make good decisions to move projects along to meet or exceed the targets.

Good computing skills; proficient in MS Office and experience with MS Access/Project (is an asset).

Must have excellent communication skills, both written and verbal in English and French.
 
Job Number: 2364
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2373 - COMPOSITE STRESS ENGINEER - cv, word doc only

Description:
Participate in treatment of non-conformities.

Participate in structural concept definition.

Analyze complex composite structures using hand calculations and Finite Element Method.

Participate in stress methodologies development.

University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience, and minimum 2 years in treatment of non-conformities.

Must have experience with finite element modeling with Patran/Nastran and with composite structures and their behavior.

A MRB experience is an asset.

Must have knowledge of aircraft structure technical requirements ( TCCA, FAA & EASA).

Are pragmatic and able to analyze results.

Are able to set-up methodologies to solve technical issues.

Must have working knowledge of Catia V5, finite element modeling and analysis and Visual Basic is an asset.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills.

Being completely bilingual (French and English) is an asset.
 
Job Number: 2373
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/03/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2376 - MRB STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor Degree in Aerospace or Mechanical engineering.

Minimum of 5 years MRB experience.

Have experience including at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Have experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Have excellent knowledge of aircraft structure and system installation technical requirements.

Have practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Have practical knowledge and experience in aircraft structure and completion components.

Are customer-oriented with innovative problem solving skills and you are organized.

Have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2376
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 04/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2378 - 3D WIRING DESIGNER - cv, word doc only

Description:
Develop the routing new Aircraft Interiors Harnesses using CATIA V5.

Follow established guidelines for design such as BM, BAPS and RAE documents.

Optimize design through analysis of weight, cost and productivity.

Conduct and/or participate in trade-studies to enhance the product definition throughout its lifecycle.

Incorporate change management authorities (RFC, PCR) into 3D models.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality KPI%u2019s.

Contribute to other relevant tasks based on program needs and demonstrate flexibility to adapt.

University degree in mechanical Engineering of equivalent work experience in harness routing.

Have over 10 years of CATIA V5 Experience in harness routing.

Have experience with harness manufacturing or methods (formboards).

Have minimum of 5 years of relevant working experience in Aerospace or Transportation.

Have harness installation experience and you are familiar with ECAD tools & processes, BM%u2019s and BAPS.

Have experience reading wiring diagrams & ESSD (an asset).

Have a strong sense of responsibility and have good organizational skills and initiative.

Are innovative and open to new ideas.

Have the ability to resolve problems and conflicts.

Are comfortable working with the MS Office suite.

Basic knowledge required :

3D and MBD creation in CATIA V5
GD&T and technical drawings
Certification rules
Manufacturing requirements
 
Job Number: 2378
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2379 - HYDRO-MECH. SYS. INTEGRATOR - cv, word doc only

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

Have 10-15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Are familiar with Microsoft Office software tools.

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.
 
Job Number: 2379
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2383 - PROGRAM & CHANGE ANALYST - WIRING

Description:
Coordinate activities and harmonize the implementation the changes.

Establish the monitoring and control processes.

Produce actions plan.

Prepare reports to show progress.

Responsible for the change management governance.

Communicate with the work package project management integration leaders.

Be the Change focal for EWIS.

University degree in Engineering.

Have at least 11 years%u2019 experience in project/program & Change Management.

Are an organized person with leadership skills

Possess logical and flexible mindsets, show initiatives and demonstrate overview/detailed approaches.

Have strong oral and communication skills.

Have strong analytical, planning, problem solving skills.

Are working well under stress and evolving environment.

Certification in project Management is an asset.

An understanding of aerospace product certification is an asset.

Bilingual - must have excellent communication skills, both written and verbal in English and French.

Specific knowledge of aircraft design, assembly and testing particularly aero-structures and wiring is essential.

Must have Operations / Production experience in an aerospace manufacturing environment.

Must have good knowledge of business drivers such as the financial and schedule aspects of a major development program.
 
Job Number: 2383
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2386 - MECHANICAL STRESS ENGINEER - cv, word doc only

Description:
Checking technical drawings.

Stress Analyzing and write stress rapport for mechanical tools and equipment.

Sign and seal design drawings for mechanical tools and equipment (lifting devices, staging, etc.).

Communicate with other departments: methods, planning, production, etc.

Mechanical Engineering degree.

Experience between 5-10 years.

Member of OIQ.

Must have knowledge and experience of mechanical systems.
Experience in welding and CWB group.

Knowledge of design STD (CSA, ANSI, ISO, ASME, etc)

Experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA ) is an asset.

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis.

Must have excellent communication skills.

Bilingual - French and English, spoken and written.

Must be computer literate and familiar with commonly used software ( MS Office ).
 
Job Number: 2386
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A/C Tech II - 2nd shift

Description:





PDS TECH INC is looking for an A&P Mechanic - 1st shift for our client in Long Beach

 



Education and Experience Requirements:



High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.


Position Purpose:



Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 

Other Requirements: 1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.






 





 
Job Number: 1710078767
Job Location: Long Beach, CA
Per Diem: No
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Ue1AAE&URLSource=cjhunter

Acft Tech II

Description:
PDS is seeking an  RS Acft Tech II  for an open position in Savannah, GA.
Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions: 1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. 2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. 3. Ensure that all work accomplished meets quality standards and specifications. 4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. 5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) 6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. 7. Provide training to less experienced technicians. 8. Protect customer property (PTP). 

Additional Functions: 1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility. 3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. 4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. 6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 7. Perform other duties as assigned. 

 


Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.

 



Unique Skills:



Sheet metal experience to include, bending, cutting, and forming from flat patterns is highly desired, and see JOB description for additional skills.

Other Requirements: 1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.


 
Job Number: 1810083374
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002mJA0AAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer
Lexington, KY
6 month contract


Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Responsibilities include: •Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn •The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations •You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education

Mandatory:

•Experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs •Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree. Considered career, or journey, level position

Desired:

•Experience with Microsoft Office Suite (Word, Excel, PowerPoint) •Demonstrated previous success working in a team based
 
Job Number: 53713
Job Location: Lexington, KY
Rate: $65
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 04/20/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer - Level 3 (2) - C

Description:
Chipton-Ross is seeking an Aeronautical Engineer - Level 3 (2) for an opening in Lexington, KY.

RESPONSIBILITIES:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. Analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to "Analysis and Design of Flight Vehicle Structures" by E. F. Bruhn oThe primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations oYou will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

REQUIRED EXPERIENCE:
oExperience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
oExperience with Microsoft Office Suite (Word, Excel, PowerPoint) oDemonstrated previous success working in a team based environment to meet objectives

PREFERRED EXPERIENCE:
Government report or thesis writing experience

EDUCATION:
Accredited Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics with five years of professional experience with a related Bachelor's degree; or three years of professional experience with a related Master's degree

WORK HOURS:
5/40, 1st Shift
Full-Time

 
Job Number: 169880
Job Location: Lexington, KY
Rate: $38 to $65.00 DOE
Duration: 6 Months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret CA

Description:
Requirement# AERO-REQ-0775
Work Location Palmdale, CA
Work Week 9/80
Needed Date 03/28/2017
End Date 12/28/2017
Number of Resources 1
Security Clearance Secret (Prime Contract:P - 16, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title Aeronautical Engineer

Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required. Candidate must possess an active SECRET clearance with 5 year re-investigation. Candidate must have significant Flight Controls and Flight Simulation experience.

Skill/Experience/Education
Mandatory:

Active SECRET Clearance with Background Investigation in last 5 years. Significant work experience with Flight Controls and Flight Simulation
Desired:

Bachelors Degree or above in an Engineering or Related field.


Interview Required Yes

Shift 1st Shift

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0775
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 04/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cleaners - Fort Lauderdale, FL

Description:
STS AeroStaff Services now offers Aircraft Cleaner jobs in Fort Lauderdale, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Qualifications:

• A shipping/receiving background would be ideal
• Aviation experience ideal, but not required
• Must be able to lift at least 50 lbs.
• Must have the following skills: time management, prioritizing, multi-tasking, and working under pressure
• Must have general computer knowledge
• Quantum experience a plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41020
Job Location: Fort Lauderdale, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Electrician - FL - O/M

Description:
Chipton-Ross is seeking an Aircraft Electrician located in Jacksonville, FL

RESPONSIBILITIES:
This posting is only for F-16 Electrical and Environmental experienced candidates.
Preferred 10 plus years' experience on the F-16.
Must be able to perform flight line operations.
Must be able to perform operational functional test

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
6 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-limited travel

 
Job Number: 168536
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 MONTHS
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Aircraft Electrician - Interim secret

Description:
PDS Tech is seeking an Electrician/Avionics Mechanic  for an open position in Jacksonville, FL. 

 
High School Diploma or GED
This posting is only for F-16 Electrical and Environmental experienced candidates. 

Preferred 10 plus years experience on the F-16. 

Must be able to perform flight line operations. 

Must be able to perform operational functional test
 
Job Number: 1810081150
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dkPlAAI&URLSource=cjhunter

Aircraft Electrician 3

Description:
PDS Tech, Inc. is seeing an Aircraft Electrician 3 in Moss Point, MS.

Description:
The aircraft electrician is responsible for lay out, fabrication and installation of electrical wiring or coaxial cables on the aircraft.
This position also requires the individual to perform tests and troubleshooting on electrical systems for conformance
 to specifications. 
 Performs repair, removal, and reinstallation of wiring as necessary.

 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:

  • Installs and repairs electrical wiring and/or cable on aircraft in adherence to established specifications.  Cuts and strips wire, terminates and insulates connections, and performs all other duties necessary in the installation process
  • Attaches wire to complicated electrical systems, fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder.
  • Some structure experience is preferred to perform tasks such as LRU tray and LRU installation, ground strap installations, with minor bracket hardware and bond installations.
  • Read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.
  • May monitor and verify quality in accordance with statistical process or other control procedures

 
 
 
 
      
Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:
  • Experience installing and routing aircraft harness assemblies
  • Experience stripping and crimping wire terminations
  • Experience using common hand held and electrical testing tools

PFT and Audio Hearing Exam required.



 
 
Job Number: 1810082645
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002e0ddAAA&URLSource=cjhunter

Aircraft Electrician 3

Description:
PDS Tech, Inc. is seeing an Aircraft Electrician 3 in Moss Point, MS.

Description:
The aircraft electrician is responsible for lay out, fabrication and installation of electrical wiring or coaxial cables on the aircraft.
This position also requires the individual to perform tests and troubleshooting on electrical systems for conformance
 to specifications. 
 Performs repair, removal, and reinstallation of wiring as necessary.

 
The selected candidate will work as part of teams in multidisciplinary roles that may include, but are not limited to:

  • Installs and repairs electrical wiring and/or cable on aircraft in adherence to established specifications.  Cuts and strips wire, terminates and insulates connections, and performs all other duties necessary in the installation process
  • Attaches wire to complicated electrical systems, fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder.
  • Some structure experience is preferred to perform tasks such as LRU tray and LRU installation, ground strap installations, with minor bracket hardware and bond installations.
  • Read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.
  • May monitor and verify quality in accordance with statistical process or other control procedures

 
 
 
 
      
Basic Qualifications:
High school diploma or GED plus 4 years aircraft electrical installation experience. Other required skills/experience:
  • Experience installing and routing aircraft harness assemblies
  • Experience stripping and crimping wire terminations
  • Experience using common hand held and electrical testing tools

PFT and Audio Hearing Exam required.



 
 
Job Number: 1810082643
Job Location: Moss Point, MS
Duration: 0 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002e0dOAAQ&URLSource=cjhunter

Aircraft Ground Test Engineer

Description:
Seeking a candidate well-versed in mechanical, hydraulic, fuel and pneumatic systems. Candidate should have the ability to read and understand mechanical and electrical schematics and drawings. Familiarity with CATIA preferred.

US citizenship or permanent resident required

- Paid Holidays
- Dental
- Blue Cross/Blue Shield Medical Insurance
- Vision
- Direct Deposit
 
Job Number: 53593
Job Location: West Palm Beach, FL
Input Date: 03/23/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Jerry Rothchild
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: jrothchild@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers - Ypsilanti, MI

Description:
STS AeroStaff Services now offers Aircraft Maintenance Controller jobs in Ypsilanti, Michigan!

Qualifications:
3+ years’ total heavy maintenance experience
A&P License
At least 1 year of heavy exp on either the DC9, 737 or the 727
Must be willing to work the aircraft if necessary. Can’t be afraid to get dirty.
Self-starter and quick to learn
What We Offer:
STS AeroStaff Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with an Aviation Recruitment Professional directly, call 1-877-707-5767. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 41973
Job Location: Ypsilanti, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Investigators - Jamaica, NY

Description:
STS AeroStaff Services is hiring Aircraft Maintenance Investigators in Jamaica, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Qualifications:

• Must have extensive Aircraft Maintenance Investigation experience, preferably 10 years
• A&P License is REQUIRED

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42065
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Mechanic II (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Aircraft Mechanic II in Eglin AFB, FL.

Description
This mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness. (See Aerospace Structural Welder for employees whose primary duty involves welding.) The Aircraft Mechanic II Structural mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness; Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic maintains repairs and modifies aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet guns and drills. This worker reads and interprets manufactures' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Mechanic most use comperhensive technical knowledge and skill to solve moderate to complex problems by interperting technical documents such as; drawings, technical orders and manufactures' manuals. The incumbent recieves technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft revelant task, and may be required to make entries in the aircraft logs and records. Most be able to prioritize workload to maintain schedules on assigned projects.

Skill/Experience/Education
Mandatory:
Must have a minimum of 5 years structural maintenance experience. The candidate must be able to interpret technical orders, drawings, or other written guidance to accomplish modification installs, repairs, replacement of structural components. Composite training/experience

Desired:
Heavy structural modification experience C-130, C-130J and CV-22 aircraft.

Work Hours:
2nd Shift, 4/10
 
Job Number: 169259
Job Location: Eglin AFB, FL
Rate: $28.25 to $30.79 DOE
Duration: 2 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Christopher Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Aircraft Mechanic II in Eglin AFB, FL.

Description
This mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness. (See Aerospace Structural Welder for employees whose primary duty involves welding.) The Aircraft Mechanic II Structural mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness; Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic maintains repairs and modifies aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet guns and drills. This worker reads and interprets manufactures' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Mechanic most use comperhensive technical knowledge and skill to solve moderate to complex problems by interperting technical documents such as; drawings, technical orders and manufactures' manuals. The incumbent recieves technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft revelant task, and may be required to make entries in the aircraft logs and records. Most be able to prioritize workload to maintain schedules on assigned projects.

Skill/Experience/Education
Mandatory:
Must have a minimum of 5 years structural maintenance experience. The candidate must be able to interpret technical orders, drawings, or other written guidance to accomplish modification installs, repairs, replacement of structural components. Composite training/experience

Desired:
Heavy structural modification experience C-130, C-130J and CV-22 aircraft.

Work Hours:
2nd Shift, 4/10
 
Job Number: 169258
Job Location: Eglin AFB, FL
Rate: $28.25 to $30.79 DOE
Duration: 2 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Aircraft Mechanic II in Eglin AFB, FL.

Description
This mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness. (See Aerospace Structural Welder for employees whose primary duty involves welding.) The Aircraft Mechanic II Structural mechanic services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness; Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic maintains repairs and modifies aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet guns and drills. This worker reads and interprets manufactures' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Mechanic most use comperhensive technical knowledge and skill to solve moderate to complex problems by interperting technical documents such as; drawings, technical orders and manufactures' manuals. The incumbent recieves technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft revelant task, and may be required to make entries in the aircraft logs and records. Most be able to prioritize workload to maintain schedules on assigned projects.

Skill/Experience/Education
Mandatory:
Must have a minimum of 5 years structural maintenance experience. The candidate must be able to interpret technical orders, drawings, or other written guidance to accomplish modification installs, repairs, replacement of structural components. Composite training/experience

Desired:
Heavy structural modification experience C-130, C-130J and CV-22 aircraft.

Work Hours:
1st Shift, 4/10
 
Job Number: 169256
Job Location: Eglin AFB, FL
Rate: $28.25 to $30.79 DOE
Duration: 2 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Aircraft Painter II

Description:
PDS Tech is seeking an Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools.
3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required.
4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks and to sign-off work.
6. Assist with aircraft movement in hangars.
7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements:
High school diploma/GED.
Valid Drivers License required.
Two (2) years experience in related paint processes.
Aircraft industry experience preferred.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

 



Unique Skills:



Must be able to work any shift and have knowledge of paint and paint process.

Other Requirements:
1. Ability to read, write, speak, and understand the English language.
2. Able to use tools and equipment associated with the aircraft painting process.
3. Ability to read and interpret blueprints and engineering documentation.
4. Able to pass Pulmonary Function Test to obtain respirator certification.
5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
6. Must be computer literate.


 
Job Number: 1810084172
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002mLmYAAU&URLSource=cjhunter

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B6tAAE&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Engineers - Melbourne, FL

Description:
STS AeroStaff Services is hiring Aircraft Structural Engineers in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program
• Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives
• The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization
• Tools utilized may include FEMAP, NX, and other software applications

Basic Qualifications:

• 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
• Secret Clearance required

Preferred Qualifications:

• Knowledge of FEMAP and NX CAE
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42107
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Technician

Description:
General Summary: 
The Aircraft Technician works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems.
 
Duties and Responsibilities:
  1. Performs scheduled and unscheduled inspections, maintenance, and repair of airframe and powerplant systems and components per acceptable methods, techniques, and practices. 
  2. Documents work performed in accordance with Regulatory and Repair Station/Quality Manual policies and procedures.
  3. Demonstrates proficiency with the methods, techniques, practices, tools, and equipment used during aircraft maintenance.
  4. Identifies, protects, and preserves piece parts and articles undergoing maintenance in accordance with RSM/QCM and company policies and procedures.
  5. Assures parts, products and materials that are installed meet regulatory requirements.
  6. Performs assigned work in a safe effective manner while practicing good housekeeping in accordance with company and regulatory requirements.
  7. Provides detailed turnovers when maintenance is left unfinished prior to shift changes 

Education, Work Experience, Certification and/or Licensure:
  1. High School degree or equivalent required.
  2. Experience in FAR Part 145 Repair Station environment maintaining general and/or business/corporate aviation aircraft.
  3. A&P Certification required in accordance with 14 CFR Part 65 from a FAR Part 147 School.
  4. Current passport and driver’s license or ability to obtain both.
  5. Experience with 14 CFR Part 43 required.
  6. Familiarization with 14 CFR Parts 91,135, and 145 preferred.
     

Knowledge, Skills and Abilities:

  1. Working knowledge of maintenance software (i.e. Quantum, Corridor, and/or SAP), Windows operating systems and Microsoft office products.
  2. Thorough knowledge of aircraft maintenance requirements and inspection procedures and practices.
  3. Excellent oral and written communication skills.
  4. Strong attention to detail and accuracy.
  5. Ability to work under pressure including time constraints and challenging situations.
  6. Ability to read work orders, blueprints, diagrams, manuals and process specifications, follow sequence of planned operations.
  7. Ability to work extended hours and travel to off-site locations requiring overnight stays with little notice as required.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 50 lbs. throughout the work shift without assistance, as required by job duties.

Pull, push, carry, lift or move materials/people/items/equipment weighing 50 lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties
 
Job Number: 1710069936
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CoeOAAS&URLSource=cjhunter

Aircraft Technician (Mechanical)

Description:

PDS is seeking an Aircraft Technician for an open position in Grand Prairie, TX.
In your role you will:








Perform fabrication, assembly, installation, maintenance, replacement, repair modification, inspection and the operational and functional checkout of aircraft mechanical or structural systems and major components. Perform troubleshooting functions of complete operating mechanical and hydraulic systems.



  • Maintain close working relationship with assigned lead regarding schedules, priorities, availability of parts, supplies and tools.
  • Use various hand tools, power equipment, measuring devices, test equipment, and paint equipment and instructions as required.
  • Ensure compliance with company and customer specifications and FAA regulations as required.
  • Complete forms and records pertaining to completion of assigned work.
  • Maintain responsibility to keep scrap at minimum levels.
  • his position description is not intended to be all-inclusive and employee will also perform other tasks as assigned.
















Education



  • HS diploma or equivalent.
  • Some trade school desirable.
  • A & P license is desired.









 


 
Job Number: 1810083821
Job Location: Grand Prairie, TX
Per Diem: No
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002mKi8AAE&URLSource=cjhunter

Aircraft Technicians - WA State

Description:
Major Manufacturing Program needs Aircraft Technicians for direct hire long term positions.
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Call 866-224-2745 Select Option 1
Email DirectHire@pdstech.com

Avionic / Electrical Test Technician

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

Qualifications:

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.


Fuel Cell Assembly Mechanic
Mechanics in this position perform various procedures to accomplish fuselage and wing joining. Work is performed on composite / metal aircraft with occasional sealing.

  • Assemble and install parts, structural components and sub-assemblies to build and attach major wing assemblies.
  • Assemble, install, connect and rework plumbing and electrical components and systems.
  • Perform continuity checks on wire bundles and electrical components.
  • Locate work area using drawings which specifies airplane number, section number, and three-point location.
  • Set up assembly tools per tooling instructions or drawing.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand, per drawing or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment.
  • Shim and/or trim parts as required.
  • Drill pilot holes using drill motor and proper size drill bit(s).
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Handle and dispose of hazardous materials in approved manner.
  • Install fasteners by correct type, size and in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Obtain two way radio and confined space flag, adhering to Communications System for Confined Hazardous Areas rules, per company procedures.
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Prepare, assemble and install tubing, standoffs, valves, regulators, compressors and ducts, using fasteners per drawing.
  • Install pre-assembled plumbing systems (e.g., hydraulic modules; smoke detectors, fire extinguishers, air, water and fuel systems), using ground straps and wires, clamps, lubricant and hand/power tools (e.g., screwdrivers, torque wrenches, nut runners).
  • Install wire bundles and electrical components using production illustrations and wiring diagrams.

Exposure to aluminum, titanium, steel, magnesium, exotic alloys, plastics, composites and hazardous materials. This position will require working in confined spaces of the wing fuel cells for extended periods. Employees crawl through an opening 17.75" X 10.00" in order to get inside the fuel cell. Employment in this position also requires, standing, reaching, turning, twisting, stooping, kneeling, crouching, squatting, crawling, pushing/pulling, working with sealants, paints and other hazardous materials and the use of personal safety gear for face, eyes, hand and ears.
 
Qualifications:
  • Position will require working in confined spaces of the wing fuel cells and crawling through an opening 17.75" X 10.00".
  • High school graduate or GED preferred.
  • Positions open to all US Persons.  “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Please Apply and select which position you are interested in on the application.

Thank you, The PDS Tech Recruiting Team   

 
Job Number: 1710078720
Job Location: Everett, WA
Duration: 24 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Janet Rauseo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UUzAAM&URLSource=cjhunter

Aircraft Test Engineer

Description:
Manufacturing Test Engineer, BSME, BSAE, LabVIEW, UG NX, FEA of welded structures

Paperless hiring
Paperless weekly pay
Direct deposit
Holiday & longevity pay
Customizable benefits
Identity theft protection
401K immediate enrollment
 
Job Location: California
Rate: 45/hr
Per Diem: --
Overtime: --
Duration: --
Start Date: --
Input Date: 03/19/2018
Firm Name: PDS TECHNICAL SERVICES
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: ppress@pdstech.com
Website: www.pdstech.com

Assembler A (10) - CA

Description:
Chipton-Ross is seeking10 Assembler A's for openings in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar panels for space applications. Essential Duties and Responsibilities:
- Perform hand soldering, wire harness assembly and component bonding
- Complete administrative functions relating to accurate documentation
- Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and associated tools
- Adheres to established company policies and procedures, paying special attention to safety regulations
- Demonstrated experience using a computer to look up and record information (Excel)
- This position requires the ability to work first or second shift
- Ability to read blueprints, schematics, and work instructions
- Familiar with soldering, wire harness assembly and component bonding
- Reliable, mechanically inclined, detail orientated
- Ability to work in a team atmosphere and displays a positive attitude
- Effective verbal and written communication skills

REQUIRED EXPERIENCE:
- Polymeric Application (NASA-STD-8739.1A)
- Soldering (NASA-STD-8739.3)
- Crimp & Wire Routing (NASA-STD-8739.4)

ADDITIONAL EXPERIENCE:
- Experience in electronics and electro-mechanical assemblies
- Experience in manufacturing assembly related work
- Trade skills training or manufacturing experience
- Familiar with Microsoft Applications
- Familiarity with solar cell and solar panel manufacturing processes
- Experience reading detailed assembly drawings and understanding the basics of geometrical dimensioning and tolerance (GDT)
- Knowledge of Lean Mfg. ISO9001 and AS9100 concepts and practices.

EDUCATION:
High school diploma or GED, technical school.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

WORK ENVIRONMENT:
- Work overtime as required
- Must be able to lift a minimum of 35 lbs.
- Must wear a smock, hair cover, and gloves during work
- Excellent manual dexterity to manipulate and move parts and hand tools needed for performing the job
- Requires accurate visual acuity
 
Job Number: 168264
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Assembler B

Description:
PDS Tech is seeking an Assembler for an open position in North Charleston, SC. 
  • Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
  • Select correct parts, materials, tools, assemblies, standards, hardware, etc.
  • Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
  • Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Company procedures.
  • Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
  • Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
  • Read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
  • Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
  • Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area.
  • Possess understanding and knowledge of basic computer systems and programs

High school diploma or GED and typically 1 or more years’ related experience or an equivalent combination of education and experience. (Must have GED or HS)

Ability to perform the following requirements:



• Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension

• Contact with sealants and solvents, exposure to noise, working on elevated platforms

• Use personal protective gear for face, eyes, ears, hand, and arms as required. 

• Pass visual acuity and color perception tests

• Read, write, and comprehend the English language

• Handle, use, and dispose of hazardous material

• Obtain & maintain training certifications as required to support assignment responsibilities

• Occasional (1 to 3 hrs) finger manipulation

• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs

• Frequent reaching overhead (3 to 6 hrs)

• Frequent walking on flat surfaces

• Frequent standing flat or uneven surfaces

• Frequent balancing on a ladder, steps, or uneven surfaces

• Occasional climbing on 3-12 ft ladders or stands

• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls

• Occasional contact with metals

• Exposure to plastics and solvents to atmospheric conditions

• Frequent exposure to noise
 
Job Number: 1810081426
Job Location: North Charleston, SC
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dvptAAA&URLSource=cjhunter

Assembler B (100) - SC

Description:
Chipton-Ross is seeking 100 Assemblers B's located in North Charleston, SC.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with Client procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead. Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement. Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.

ADDITIONAL REQUIREMENTS:
Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise

EDUCATION:
Accredited High School Diploma/GED and typically 1 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
FULL TIME/VARIABLE SHIFT
- Candidates will be required to be available to work Mon - Sun with flexible hours based upon the factory.
- On assigned days, candidates may be assigned to work up to 12 hours per day; hours will be determined based upon business needs
- Candidates will be assigned to work up to 40 hours per week; hours will be determined based upon business needs

MISCELLANEOUS:
Attend and pass an Assessment prior to start date. Failure of class may be cause for assignment termination.
 
Job Number: 168679
Job Location: North Charleston, SC
Rate: $DOE
Duration: 6 Months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Christopher Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation CASS Analysts - Jamaica, NY

Description:
STS AeroStaff Services is hiring Aviation CASS Analysts in Jamaica, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Analyst is responsible for conducting the administrative aspects of all QA CASS Programs. In addition the Analyst will be responsible to monitor, trend and update the various QA databases with audit and investigation data. The candidate would have the ability to track and crystallize this information within QA’s periodic CASS reports.

Job Duties:

• Administers the business processes associated with all CASS programs, which entails data collection, analysis, and reporting for the programs
• Processes vendor approval request (MX-55s) as received from QA Internal customers
• Analyzes and generates CASS reports using Surveillance data
• Make recommendations for CASS activity, escalations, de-escalations based on audit activity
• Maintain Maintenance Provider Manual/Approved Vendor List (MPM/AVL)
• Tracks the Coordinating Agency for Supplier Evaluation database for audit completion and closure
• Maintains listing of Foreign Repair Station expiry and purges expired certificates
• Generates, distributes and tracks Vendor Audit Questionnaires
• Maintains the QA electronic databases and hard audit files and finding reports
• Collects information to support CASS investigation and analysis
• Information collection efforts include, but not limited to database queries/reports verifies correct references and acquiring supplementary data from internal and external databases
• Develop and generate other periodic CASS reports to support CASS management
• Additional duties as assigned

Basic Qualifications:

• Bachelor’s Degree or equivalent work experience
• One (1) to three (3) years analytical experience
• Experience with database management and Microsoft Office applications
• Must pass a ten (10) year background check and pre-employment drug test
• Must be legally eligible to work in the country in which the position is located

Preferred Qualifications:

• Strong team building interpersonal skills
• Excellent verbal and written communication skills
• Strong organizational and time management skills
• Working knowledge of commercial aircraft systems preferred
• Ability to work in a fast paced deadline driven environment
• Working knowledge of regulations governing commercial aviation
• Working knowledge of website development preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42028
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation QA Auditors - Jamaica, NY

Description:
STS AeroStaff Services is hiring Aviation QA Auditors in Jamaica, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Auditor is responsible for performing external audits as required by Federal Aviation Regulations (FAR) 121.373. The Auditor perform reviews and audits of our external business partners’ facilities as well as their policies and procedures.

Job Duties:

• Plan, schedule, and conduct internal and external audits for the following: Line Station , Fuel Farm, Fuel Into-Plane, De-Icing, Essential Maintenance (Operations Spec D91), Repair Station
• Make recommendations for Approved Vendor list addition/deletion based on audit assessment
• Perform investigations of incidents and events which involve our external business partners or the products, goods and services
• Maintain records of all audits in accordance with General Maintenance Manual (GMM) policies/procedures
• As part of our Continuing Analysis and Surveillance System (CASS), performs analysis of audit findings or reliability reports for trends that involve the services or business partners
• Perform evaluation of audit responses and provides compliance recommendations as required
• Provide technical and compliance/regulatory assistance to other departments in support of day-to-day operation
• Other projects and duties as assigned by the Manager, Quality Assurance

Basic Qualifications:

• A&P License is required and ideally looking for 10-15 years of experience in Aviation
• High School Diploma or General Education Development (GED) Diploma
• Federal Aviation Administration (FAA) Airframe and Powerplant Certificate
• Three (3) years of commercial aircraft Maintenance, Quality Control, Quality Assurance or applicable
• Four (4) years’ experience in a 14 CFR Part 121 Air Carrier Quality or Maintenance environment
• (military experience can be used in lieu of 121 experience)
• Thorough working knowledge of Federal Aviation Regulations
• Possess and maintain a valid Passport with the ability to travel in and out of the United States
• Possess and maintain a valid Driver License and a driving record that meets insurance standards
• Available for occasional overnight travel (50%)
• Pass a ten (10) year background check, pre-employment drug test, and criminal history records check (CHRC)
• Legally eligible to work in the country in which the position is located

Preferred Qualifications:

• Previous auditing experience in the 121 Air Carrier or Military Department of Defense (DOD) auditing environment

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42064
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Receiving Inspectors - Jamaica, NY

Description:
STS AeroStaff Services now offers Aviation Receiving Inspector jobs in Jamaica, New York!
Job Summary:
The Inspector ensures all parts and materials brought into the system for the support and maintenance of aircraft are serviceable and airworthy. The Inspector ensures quality standards are maintained throughout the process of certification and acceptance.
Essential Duties & Responsibilities:
• Perform general visual inspection with attention to criteria to indicate possible unapproved parts condition
• Ensure parts are not damaged upon receipt from business partner
• Ensure parts are received with the proper supporting documentation
• Certify parts are from an approved source and for use
• Determine if all parts and materials are serviceable or unserviceable per the requirements of the General Maintenance Manual and all applicable Federal Aviation Regulations
• Receives clear, detailed, and specific instructions and consults with Crewleader/Teamleader on all matters outside the scope of daily responsibilities/activities
• Receives general instructions on what is to be done, limitations, quality and quantity expected, deadlines, and priority of assignments from Crewleader/Teamleader
• Uses initiative in carrying out recurring assignments independently without specific instruction but receives additional specific instructions from Crewleader/Teamleader for new, difficult, or special projects/assignments
• Plans and carries out work assignments and handles problems in accordance with instructions, policies, previous training, or accepted practices in the occupation
• Consults with Crewleader/Teamleader on unique situations which do not have clear precedents
• Plans and carries out work assignments; resolves most conflicts which arise; coordinates work with others as necessary; interprets policy on own initiative in terms of established objectives
• Keeps Crewleader/Teamleader informed of progress, potentially controversial matters, or far-reaching implications
• Plans, designs, and carries out programs, projects, studies, or other work independently
• Receives little or no supervision from Crewleader/Teamleader
• Trains and assigns work to Crewmembers/Teammembers on an occasional basis; performs the same work as the group on a regular basis
• Trains, assigns work to, and checks work of one (1) Crewmember/Teammember; does not conduct the same work as that Crewmember/Teammember on a regular basis
• Trains, assigns work to, and checks work of two (2) or more Crewmembers/Teammembers; participates in the decision to hire, fire, and promote Crewmembers/Teammembers; does not conduct the same work as Crewmembers/Teammembers on a regular basis
Basic Qualifications:
• High School Diploma or General Education Development (GED) Diploma
• At least one of the following requirements must be met: Quality Control Inspector with a valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate, or holds a valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate with previous receiving inspection experience (for one (1) year in the last two (2) years), or worked in a Materiel Services Department for one (1) year, at least six (6) months of which have been in receiving parts and materials
• One (1) year parts and material handling or processing experience with a commercial airline
• One (1) year of previous receiving inspection experience preferred but not required
• Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate preferred
• Possess and maintain a valid Driver License in the country in which you are applying
• Regular attendance and punctuality
• Organizational fit for the culture, that is, exhibit the values of Safety, Caring, Integrity,
• Fun and Passion
• Well-groomed and able to maintain a professional appearance
• Pass a ten (10) year background check and pre-employment drug test
• Legally eligible to work in the country in which the position is located
Preferred Qualifications:
• Proficient with Microsoft Office suite
• Effective communication skills; complete fluency in written and spoken English
• Possess the ability to interpret manuals and technical data
• Write technically in order to maintain required documentation as it pertains to aircraft parts
• Ability to crawl, bend, kneel, climb, and stoop frequently in confined spaces
• Ability to think creatively
• Able to work under pressure in a team environment
• Familiar with Federal Aviation Regulations pertaining to aircraft parts and airworthiness
What We Offer:
STS AeroStaff Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.
If you would like to speak with an Aviation Recruitment Professional directly, call 1-877-707-5767. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 41058
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023UFLAA2&URLSource=cjhunter

Avionics Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades


Immediate needs - email a resume and call our national recruiters
 
Job Location: South Carolina
Input Date: 03/05/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
Phone: 978/667-0001
800 Phone: 800/661-8272
Fax Phone: 800/661-4055
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers/DOORS

Description:
*Must have Engineering Degree & able to obtain security clearance
Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-real time to real time) and off-board functionality to this software. Experience in defining avionics systems requirements in DOORS is a requirement

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Avionics-Doors
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Duties and Responsibilities:
Define, plan, and develop complex systems level requirements to support avionic systems
Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
Perform system evaluation and analysis to verify the system design compliance with functional requirements
Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
Develop targeted system level enhancements to address customer feedback and product improvement initiatives
Conduct system lab testing and aircraft functional testing
Prepare presentations on avionics system design/development status
Support system analyses for avionic systems

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
Working knowledge of design requirements of 14CFRPart 23
Proficiency in writing technical documentation and reports involving test data and analysis
Familiarity with avionics/electrical test laboratories and lab equipment
Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
Proficiency in requirements management tools such as DOORS
Proficiency in PLM Tools such as TeamCenter and SAP
Ability to handle complex work assignments
Ability to work independently and within a multi-functional team environment

The Structures Company is an AA/EOE.
 
Job Number: 189
Job Location: NC
Rate: $60.00
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 04/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer - Secret Clearance

Description:
Job Description:
Seeking an experienced Systems Engineer to support the Air Force Life Cycle Management Center (AFLCMC) C-5 Super Galaxy Division. The successful candidate will provide C-5 avionics and propulsion systems guidance and be familiar with DoDI 5000.02 and the AFLCMC acquisition process. The candidate will demonstrate experience with system design and integration, familiarity with test plans and programs, and joint interoperability testing and certification. The candidate will have experience as a team lead.

Education:
A Master's Degree and fifteen (15) years of engineering experience is required.
M.S.in Systems Engineering is preferred.

Experience/Knowledge, Skills and Abilities:
Current experience and knowledge of the DoD acquisition processes is desired.
Ideal candidate will have systems engineering experience, knowledge of systems engineering principles and C-5 aircraft experience is preferred.
Must have the ability to communicate with and distill information from technical resources during formal and informal meetings.
Background in aircraft systems engineering is required.
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information (Secret).

U.S. Citizenship is required.
Secret Clearance is required. 
Master's degree is required.
 
Job Number: 18-11466
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 5 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

CATIA Instructor

Description:
PDS is seeking an CATIA Instructor for an open position in Savannah, GA

In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Client's products and services 

Essential Functions:
  1. Formal Classroom instruction experience required for CATIA and PDM.
  2. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
  3. Is consulted extensively by associates and others as a recognized authority within the field
  4. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
  5. Approach to problem solving balances technical product, cost and schedule
  6. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
  7. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 


Additional Functions:

  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 


Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Formal Classroom instruction experience required for CATIA and PDM.
  • Advanced degree in engineering, or related curriculum preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

POC:  Clyde (813)426-9917 or ccallwood@pdstech.com 
 


 
Job Number: 1610056929
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FavrAAC&URLSource=cjhunter

CNC Grind OD/ID - MI

Description:
Chipton-Ross is seeking a CNC Grind OD/ID for an opening in Macomb, MI.

RESPONSIBILITIES:
The acceptable candidate shall be required to set up and operate CNC and Manual OD and ID grind equipment with minimal supervision. Grinding of splined shafts and aircraft gears holding tolerances of .0001"-.0005." Maintain proper documentation of SPC data and participate in client's certified operator program. Familiarity with lean manufacturing and continuous improvement techniques beneficial. Overtime generally required. Inspection of work utilizing certified operator program. Able to bend, stoop, stand, kneel, and lift up to 50 lbs. as needed.

REQUIRED EXPERIENCE:
Blueprint reading skills, shop math skills and proficiency in the use of a wide variety of precision measuring tools is required. 3 to 5 years' experience.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 166351
Job Location: Macomb, MI
Rate: $16 to $28.00 DOE
Duration: 6 Months CTH
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Cabin Development EWIS AR/DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Essential Functions:
1. Plans R&D programs and recommends technological application programs to meet corporate objectives
2. Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
3. Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
4. Champions and develops innovative principles and ideas
5. Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
6. As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
Unique Skills:
The Cabin Development team: In Cabin Development, we design, engineer and certify the next generation of company cabin interiors. As an EWIS AR for Cabin Development, you will:
• Review and approve engineering designs for EWIS compliance aspects
• Interact and coordinate with FAA/DERs/ARs during a certification project
• Coordinate, complete and track certification tasks
• Write/review/approve certification plans, test plans, test reports and prepare related paperwork and forms.

What you'll bring to the team:
• Preferably, you will have been an Authorized Representative (AR), a Company AR at another company or an FAA Delegated Engineering Representative (DER)
• Knowledge and understanding of 14CFR - Part 21, 23, 25, 91, 135
• EWIS Certification and DER experience finding compliance with 14 CFR Part 25, Subpart H, Sections 25.1701 through 25.1733
• Expertise with aircraft interiors required • Experience with certification activities associated with Supplemental Type Certificates (STC)

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)


Education and Experience Requirements:
Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. Fifteen (15)+ years progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB incl bus justification.
 
Job Number: 373165
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/26/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Cabinetmaker Sr

Description:

PDS is seeking a Cabinetmaker Sr for an open position in Savannah, GA.

Under general supervision, fabricates the most complex cabinets and other wood-surfaced subassemblies for installation in aircraft. Assists lead by overseeing projects and providing guidance, assistance and training to co-workers. 

Essential Functions:

  1. Fabricates complex high quality furniture and other wood-surfaced subassemblies using stationary and hand held-tools.
  2. Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
  3. Utilizes a variety of woodworking tools and techniques.
  4. Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
  5. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
  6. Utilizes the material tracking system to create parts demand, track squawks and to sign-off work. 


Additional Functions:

  • Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians.
  • Oversees projects and coordinates with Lead to delegate tasks to assigned technicians.
  • Conducts safety audits and assists team members in doing safety audits.
  • Assists in maintaining shop equipment and associated JSAs.
  • Coordinates with other backshops when necessary.
  • Adapts to sudden schedule changes.
  • Performs other duties as required.


 



Education and Experience Requirements:



  • Must be able to work any shift and work overtime as needed.
  • High school diploma/GED.
  • Advanced knowledge of cabinetmaking processes and products.
  • Four (4) years of experience in cabinetmaking.
  • Experience in aerospace industry preferred.
  • Possess a working knowledge of inspection and process specifications preferred.

Other Requirements:

  • Demonstrates excellent communication skills, both verbal and written.
  • The ability to read, write, speak, and understand the English language.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate..


Please send your current resume to:
Earl Sawyer
Aviation recruiter 
esawyer@pdstech.com
843-277-6616  

 
Job Number: 1710074567
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023JSqAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Communication & Network Systems Design & Analysis Engineers

Description:
Seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls xecution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues.
*Must be able to obtain security clearance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-Network Design & Analysis
Job Location: Oklahoma City, OK
Rate: $75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Communication/Network Systems Design Engineer 4

Description:
**Must be able to obtain a Security Clearance.**

The Company Company is seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Company representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated "hands on" capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally "find a way" when roadblocks are encountered.
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 373261
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 05/26/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the SpaceShipTwo pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes.
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering

· 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
· Proficient with CATIA V5
· Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
· Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
· Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
· Experience designing for aerospace environments desired
· Experience in the development of human spaceflight hardware desired
· Experience with Product Lifecycle Management (PLM) software and configuration management processes
· Excellent analytical and decision-making skills
· Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.

· Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

Required Skills:
Microsoft Office, CATIA, Structural design of primary and secondary composite aircraft structure.

The Structures Company is an AA/EOE.
 
Job Number: 73
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 04/18/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Computer Systems Software Engineer Sr II - TX - C

Description:
Chipton-Ross is seeking a Computer Systems Software Engineer Sr II for an opening in Arlington, TX.

This is a hands on technical software engineering position. The successful candidate will support integration and configuration of computational system architecture and system software for real-time simulation applications.

RESPONSIBILITIES:
Create new simulation models using established and new modeling techniques
Design, develop, code, integrate and test simulation software to meet requirements
Design computer architecture, simulator networks, software interfaces, and software infrastructure
Responsible for operating systems installation and configuration
Will troubleshoot issues with computational equipment configuration and interfaces
Will configure and troubleshoot networks of deliverable equipment
Responsible for requirements, design, development, integration, testing, and verification of I/O, 1553, ARINC 429, and various other simulation interfaces
Support software additions and testing of DIS/HLA interfaces for instructor operator stations

REQUIRED EXPERIENCE:
Linux Kernel Device Drivers, Level D Flight Simulation, Simulate/Stimulate Aircraft LRUs
Knowledgeable in Linux operating systems installation and configuration, including kernel recompilation, device driver maintenance, IP address management, and general system-level configuration
Management of a software baseline, including branching, merging, building, maintaining, and installing software
Creation and maintenance of coldstart procedures that are used to install and configure the OS on various Linux and Windows machines
Previous simulation system experience required, training system simulation experience preferred
Bachelor's Degree in Computer Science, computer Engineering or related discipline, or equivalent
9 plus years of direct software development experience
9 plus years C++, C, Ada, FORTRAN
3 plus years Linux development environment
Experience with Diskless Cloud infrastructure, with SAN and NAS systems
Virtual environment experience with VMware, software, and appliances
Candidate should be a fast learner with very strong analysis and problem-solving skills
Ability to carry tasks through to completion with only general technical direction
Experience working in a team environment
Good communications skills
Microsoft Visual Studio, Eclipse, gcc, gdb, ClearCase, ClearQuest experience a plus
HLA experience a plus

EDUCATION:
Accredited Master's Degree or equivalent experience in an engineering discipline

WORK HOURS:
9/80, Day Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 170216
Job Location: Arlington, TX
Rate: $50 to $80.00 DOE
Duration: 12 Months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Continuous Improvement Specialist II

Description:
Location: Savannah, GA
Rate: DOE
Duration: Long Term contract

****MUST be a U.S. citizen or Permanent Resident****

Unique Skills:
Familiarization with Operations specifically aircraft experience preferred. Training within Industry (TWI) certification and ability to train others with demonstrated experience preferred.

Education and Experience Requirements:
Bachelor's Degree or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years related professional work experience. Manufacturing (ME), Industrial (IE), or Quality (QE) Engineering or like experience preferred. Six Sigma Green Belt preferred.

Position Purpose:
The Lean Six Sigma (LSS) initiative is a major tool in Gulfstreams continuous improvement strategy. The Continuous Improvement Specialist II, under minimal supervision, independently works to instill the principles of operational excellence within their assigned areas. They lead, instruct, and coach others in the application of lean methodologies. The CI Specialist II provides managers with professional support in their continuous improvement implementation.

Principle Duties and Responsibilities:

Essential Functions: 1. Responsible for assisting management in planning and coordination of activities related to Lean implementation. 2. Coaches managers and teams in the application of the principles of operational excellence. 3. Key resource to functional area(s) in identifying and defining projects by value stream/critical metric events that are high value opportunities for improvement. 4. Prepare, conduct, and evaluate analyses, for planning improvements, strategies and problem solving that impacts company decisions. 5. Facilitate Value Proposition activities for project and action definition. 6. Provides management with status updates through feedback and appropriate reporting on assigned projects, kaizen events, and CI participation. 7. With minimal supervision, leads and manages projects and kaizen events across multiple organizations. Decision and problem solutions with medium risk, may affect dept./section/other areas objectives. 8. Provide project support for designated site Lean Specialists/ME/IE, in the area of documentation, the Lean toolset and facilitation. 9. Responsible for developing necessary continuous improvement training material and instructing training sessions. 10. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Duties of Continuous Improvement Specialist. Perform other duties as assigned.

Other Requirements: 1. Demonstrated proficiency in Lean methodologies such as 6S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. and/or Six Sigma process variation, DFM (Design for Manufacturing) concepts. 2. Proven track record of developing process improvement project plans and leading teams and individuals to implement and drive projects resulting in bottom line, measurable, hard cost savings. 3. Proven ability to gather and analyze data and work with teams and individuals to develop and achieve measurable goals on time and on budget. 4. Proven ability to train, mentor, and develop others in all the activities listed above.
 
Job Number: 8836
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Contract & Pricing Admin 4- Secret

Description:
PDS Tech Inc is seeking a Contract & Pricing Admin for an open position in Huntsville, AL

As member of acquire business and program business management teams, leads proposal development and negotiation and provides contracting expertise to develop and negotiate complex creative business solutions for R&D, advanced product development and new and follow-on business. Represents the company to diverse customers, including U.S. Government entities and international customers and commercial space customers. Solely authorized to exercise commitment authority in negotiating and contracting for the sale or development of complex, high performance defense and aerospace products and services including aircraft, missiles, spacecraft and launch vehicles. Administers complex contracts and agreements to ensure efficient, effective and compliant performance during the entire acquisition and product lifecycle including interpretation of contract requirements, risk management, change management, conflict resolution, delivery and payment for products and services. Establishes professional networks and customer rapport to facilitate company objectives and customer satisfaction. Provides contracts and pricing mentoring, technical and operational leadership across the enterprise. Partners in the development of business unit strategy and achievement of goals.
Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 1710076376
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sheila Hernandez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NKtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Acft Painter II

Description:
Unique Skills:

Must be able to work any shift and have knowledge of paint and paint process.


Education and Experience Requirements:
High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.


Position Purpose:

The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.

Principal Duties and Responsibilities:

Essential Functions: 1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities.

Additional Functions: 1. Perform other duties as required.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.
 
Job Number: 132321
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Aircraft Tech II

Description:
Unique Skills:

Sheet metal experience to include, bending, cutting, and forming from flat patterns is highly desired, and see JOB description for additional skills.


Education and Experience Requirements:
High school diploma/GED. Valid Drivers License required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required.


Position Purpose:

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Principal Duties and Responsibilities:

Essential Functions: 1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. 2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. 3. Ensure that all work accomplished meets quality standards and specifications. 4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. 5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) 6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. 7. Provide training to less experienced technicians. 8. Protect customer property (PTP).

Additional Functions: 1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. 2. Implement and apply Lean/continuous improvement processes to all areas of responsibility. 3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. 4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. 6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 7. Perform other duties as assigned.

Other Requirements: 1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 130283
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

Contract - Cabinetmaker II

Description:
Unique Skills:
Must have experience with aircraft cabinetmaking Experience in aerospace industry and with products preferred.

Education and Experience Requirements:
High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years’ experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.

Position Purpose:
Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Principal Duties and Responsibilities:

Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work.

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required.

Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
 
Job Number: 117083
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 05/15/2018
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Email: recruiter@intergengroup.com
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract -Prod Painter I

Description:
Unique Skills:
None

Education and Experience Requirements:
High School diploma/GED. Must have knowledge of tools, equipment, and materials used in painting trade and methods of mixing paint colors. One (1) year experience in painting/paint preparation or related experience.

Position Purpose:
Under supervision, effectively prepare and paint major sub-assemblies and other parts of aircraft in production made according to specifications and schedule requirements.

Principal Duties and Responsibilities:

Essential Functions: 1. Mix paints, primers, etc. according to specifications. 2. Paint major assemblies (including metal, fiberglass and composite material), detail parts, and apparatus related to ground support. 3. Strip paint and prepares surfaces as required. 4. Perform miscellaneous paint operations and applies decals. 5. Maintain a neat and orderly work area, supports the company 5S and Lean Initiative Programs and complies with all safety regulations. 6. Demonstrate Manufacturing competencies in the Employee Effectiveness Review.

Additional Functions: 1. Perform other duties as assigned.

Other Requirements: 1. Proficiency in current personal computer based software. 2. Must be able to meet the physical requirements of the position. 3. Must be able to work any shift.
Languages Required (in addition to English): No Selection
 
Job Number: 130921
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Systems Engineer - Secret Clearance

Description:
Job Description:
Senior Systems Security Engineer to provide product support for the USAF Cyber Resiliency Office for Weapon Systems (CROWS) in the area of Systems Security Engineering (SSE) and Cyber Resiliency.

The Senior Systems Security Engineer will be responsible for the following:
• Focus on ensuring cyber security and resiliency is incorporated in the weapons systems design process via the Systems Engineering (SE) process.
• Support development of SSE artifacts and acquisition templates for inclusion in SE processes.
• Assist in the development of a requirements construct to help USAF programs interpret and scope system security, acquisition security, and cybersecurity and resilience requirements.
• Leverage NIST security controls, FAA direction, and other inputs to inform system security requirements.
• Perform technical analyses, conduct research, and use technical management principles to assess impacts to DoD and USAF systems engineering and acquisition policies and processes; and provide recommendations for improvement.
The candidate selected should be experienced and successful at solving complex system integration and engineering issues, enjoy working in a dynamic, responsive, and collaborative environment, and dedicated to the success of our customers. Work location is at Wright-Patterson AFB in Dayton, OH and sit within AFLCMC/EZS CROWS LOA2 office.

Education/Experience:
A Bachelor's degree and fifteen (15) years of experience is required.

Knowledge, Skills and Abilities:
Candidate should have a foundational understanding of DoD weapon system acquisition and system Life Cycle Systems Engineering processes. Position requires technical background in development of weapons system/platform avionics and/or software. Position requires expertise and experience in systems security engineering in one or more security specialty areas, such as Cybersecurity, Cyber Resilience, Anti-Tamper protection, Supply Chain Risk Management, Software Assurance, and Hardware Assurance.
Other required skills include: Interviewing skills, to talk with individuals and groups about their needs and ask the right questions to surface essential requirements information; Listening skills, to understand what people say and to detect what they might be hesitant to say; Analytical skills, to critically evaluate the information gathered from multiple sources, reconcile conflicts, decompose high-level information into details, abstract up from low-level information to a more general understanding, distinguish presented user requests from the underlying true needs, and distinguish solution ideas from requirements; Facilitation skills, to lead requirements elicitation workshops; Observational skills, to validate data obtained via other techniques and expose new areas for elicitation; Writing skills, to communicate information effectively to customers, marketing, managers, and technical staff; Organizational skills, to work with the vast array of information gathered during elicitation and analysis and to cope with rapidly changing information; Interpersonal skills, to help negotiate priorities and to resolve conflicts among project stakeholders (such as customers, product management, and engineering).

PREFERRED SKILLS
Master's degree in Engineering with twenty (20) years of experience is preferred. Broad understanding of systems engineering; a broad understanding of security; a technology specific understanding (e.g., avionics development); and a domain specific understanding (e.g., aircraft, space systems).

The selected applicant should have knowledge of Air Force Assessment and Authorization (A&A) cybersecurity process and current DoD cyber security requirements.
 
Job Number: 18-12157
Job Location: Dayton, OH
Rate: 50-55
Per Diem: SPLIT
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

DAR / Engineering Contractor

Description:
PDS Tech is seeking a DAR / Engineering Contractor for an open position in Savannah, GA.
 

Unique Skills:



Applicant shall be a current or prior independent DAR or a current ODA Unit member with TC or PC conformity function codes. Unique Skills: Current qualification as a FAA DAR in good standing with function code 21. In a team oriented environment, performs conformity inspections in support of Type Certification activities. As an ODA Inspection Authorized Representative (IAR) (FAA Designee) work as an integral part of the Organization assuring compliance to regulatory requirements in the performance of all ODA/FAA conformity / certification activities.



Principal Duties and Responsibilities:
Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned.



 


As our ideal candidate, you will meet the following requirements:
  •  Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

  • Other Requirements:1. Advanced degree in engineering, or related curriculum preferred2. The level of technical skill and abilities appropriate for this grade will be established by each discipline




PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
 
Job Number: 1810080754
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002disNAAQ&URLSource=cjhunter

Datalink CEC Project Analyst - MD - C

Description:
Chipton-Ross is seeking a Datalink CEC Project Analyst located in Lexington Park, MD

RESPONSIBILITIES:
We are looking for a professional to provide technical program support to the Networking and Data Links (NDL) team for the Cooperative Engagement Capability (CEC) in the E-2D aircraft.
The selected applicant will:
Interface with various organizations & IPTs internal and external to PMA-231 concerning various technical topics including: interoperability, system upgrades, and technical issues.
Effectively communicate technical related requirements formally and informally to other organizations, peers, and leadership.
Provide expertise in SOW Development, Evaluating Proposals, CDRL tracking/review, and support of System Engineering Technical Review (SETR) events.
Provide Risk & Opportunities Management support, including maintaining configuration control or each risk/issue and/or opportunity by working with the team members to obtain comments.
Provide schedule support including schedule planning, development and tracking.

REQUIRED EXPERIENCE:
Applicant must have experience with networking configurations on aircraft; must be familiar with SOWs and CDRLs in a DOD environment; must be familiar with Cybersecurity/IA concerns in a DOD environment; must have experience in DOD. Strong MS Office skills required are required.

If you don't have a PMA-231 then PMA-234 is ok.

EDUCATION:
Accredited A, BS or BA Degree is required. ALLOWABLE SUBSTITUTION: An AS or AA Degree and an additional four (4) years of experience; OR an additional eight (8) years of experience may be substituted for a BS or BA Degree.
Minimum Experience Requirement: At least four (4) years relevant experience.

WORK HOURS:
Full-Time

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 169039
Job Location: Lexington Park, ,MD
Rate: $DOE
Duration: 12 MONTHS (CTH)
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Design Engineers

Description:
Structures or equipment installation or electrical.
Must be degreed. UG NX. Modeling a plus. Tactical aircraft a plus.


Paperless hiring
Paperless weekly pay
Direct deposit
Holiday & longevity pay
Customizable benefits
Identity theft protection
401K immediate enrollment
 
Job Location: Midwest
Start Date: --
Input Date: 03/19/2018
Firm Name: PDS TECHNICAL SERVICES
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: kbrownsher@pdstech.com; mmccarthy@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Seeking a Design and Analysis Engineer 3 located in Huntington Beach, CA 37

RESPONSIBILITIES:
Join a team where Engineering really matters! Client C-17 is seeking a design and analysis (level 3) engineer in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, CA. Members of the C-17 Avionics & Flight controls (AVFC) team develop and test associated systems in a fast paced Agile engineering environment. Successful candidates will research and integrate new technologies that support the world's finest airlift aircraft. Candidates will have the opportunity to work with Air Force customers using the latest engineering techniques to design and test C-17 aircraft sensors, controls, communications, avionics, and flight systems.

Client, a new business unit from the customer services groups within the company's existing commercial airplanes and defense, space and security business units is a customer-focused, dedicated services business designed to drive greater value. This new organization draws on the best talent and experience from across the business and within the industry to build our services champion culture and create the leading services business.

Responsibilities
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7 AM - 4 PM
 
Job Number: 170090
Job Location: Huntington Beach, CA
Rate: $61.85-$68.75
Per Diem: Yes
Overtime: Yes
Duration: 6 mths
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-5801

Join a team where Engineering really matters! Our Global Services is seeking a design and analysis engineer 3 in Avionics and Flight Controls (AVFC) Engineering on the C-17 Military Airlifter Program. AVFC team members develop and test associated systems in a fast paced Agile engineering environment. You will research and integrate new technologies that support the world’s finest airlift aircraft. You will also have the opportunity to work with Air Force customers using the latest engineering techniques to design and test C-17 aircraft sensors, controls, communications, avionics, and flight systems.

Responsibilities:
• Develop electronic and electrical flight control system solutions
• Participate in modification projects for flight control hardware and software designs based on platform requirements
• Execute systems and software testing to verify operational and functional requirements
• Manage hardware/software suppliers' performance to ensure customer requirements are met
• Support resolution of product integration & field operation issues
• Research new technologies for potential application to C-17
• Develop solutions to technical problems of safety of flight scope and impact
• Apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
• Integrate into teams and collaborate with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
• Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
• Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5801
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 04/11/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Oklahoma City, OK
2018-5785

Join our C-17 Military Airlifter Program as senior-level Communication/Network System Design engineer within Avionics and Flight Controls Engineering organization. Working under the supervision of Lead Engineers, you will integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. You will participate in projects to solve issues and implement their solutions utilizing Agile methods and processes. Working with customers and their representatives, you will obtain feedback for product enhancements and corrective actions.

Responsibilities:
• Develop electronic and electrical system solutions
• Participate in modification projects for basic hardware and software designs based on platform requirements
• Execute systems and software testing to verify operational and functional requirements
• Manage hardware/software suppliers' performance to ensure customer requirements are met
• Support resolution of product integration & aircraft production issues
• Research new technologies for potential application to C-17
• Develop solutions to technical problems of limited scope and impact; apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Qualification:
• Required – Able to obtain clearance
• Possess technical and engineering skills already developed while attaining Science degree(s) and entry level work experience.
• Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must.
• Integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must.
• Interact professionally with customers, suppliers, field representatives, and fellow engineers.
• Dependable, innovative, an independent thinker
• Possess excellent & creative problem-solving skills.
• Demonstrates 'hands on' capabilities in class projects, previous work experience, or hobbies.
• Able to demonstrate, through past experience, ability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5785
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 6 Months
Input Date: 04/09/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design and Analysis Engineer 4 (3) - OK - O/M

Description:
Chipton-Ross is seeking 3 Avionics & Flight Control Engr 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and prior work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

ADDITIONAL EXPERIENCE:
The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated "hands on" capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally "find a way" when roadblocks are encountered.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 170021
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Description:
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Client is seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
668-Communication / Network System

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-06014
Job Location: Oklahoma City, OK, OK
Input Date: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L1VAAU&URLSource=cjhunter

Electrical ( EWIS )

Description:
Electrical EWIS Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

Electrical EWIS Engineer selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique skills:
- Required as a Electrical Applications Engineer (TSII) at Company you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, backshells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8914
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Applications Engineer

Description:
Electrical Applications Engineer has experience with AutoCAD required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Electrical Applications Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades


Immediate needs - email a resume and call our national recruiters
 
Job Location: South Carolina
Input Date: 03/05/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
Phone: 978/667-0001
800 Phone: 800/661-8272
Fax Phone: 800/661-4055
Email: acs@acsnatl.com
Website: www.acsnatl.com

Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Are you an Electrical Engineer with a high level of experience utilizing your skills in AutoCAD? Are you looking for an opportunity to work in a fast-paced, team environment with one of the nation's leading aerospace companies? We are currently seeking an Engineer in the Lexington, Kentucky area and would love to speak with you.

The ideal candidate for this position will perform the following tasks:
* Researches and designs electrical systems for integration into various fixed wing platforms.
* Interpret customer requirements to research
* Develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards

Mandatory Qualifications and Experience:
* Familiarity with SAE AS50881 design guidelines
* Understanding of ANSI/ASME Y14.100 or related design and drafting standards
* Experience with AutoCAD or similar 2D design software tools
* Demonstrated previous success working in a team based environment to meet objectives

Desired Qualifications and Experience:
* Familiarity with C130 or other fixed wing aircraft
* Experience with programming environments Labview and/or Matlab
* Experience with the an engineering change process and/or configuration control process
* Experience with Catia V5 or other modern 3D parametric modeling program
* Experience with Teamcenter PLM software
* Must be able to obtain an Active DoD secret level clearance

The ideal candidate for this position will possess the following skills and characteristics:
* Strong communication skills, both oral and written
* Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis)
* Ability to create and review all electrical drawing types (schematics, cable harness, etc)
* Ability to work under little or no supervision

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127501
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electrical Engineer

Description:
JOB SUMMARY

Electrical Engineer Reports to the Engineering Manager and a member of a given integrated product team, the Electrical Engineer will participate in the development of new aircraft system designs, modifications to existing designs, and new customer introductions.

JOB RESPONSIBILITIES

• Responsible for the design assigned including manufacturability, assembly, and meeting cost and weight targets
• Responsible for Bills of Material
• Responsible for following up/communicating with purchasing, prototyping, testing, and manufacturing to ensure high quality of design.
• Detail design of electrical integration into aircraft cabin monuments
• Design for manufacturability and assembly
• The design and detail modeling of a variety of monument components in order to meet the program requirements
• Production detail design and support development
• Delivery of detail design into BOM
• Ability to make trade-offs to yield optimum results, achieving cost, weight, functionality and reliability goals
• Managing and meeting cost and weight targets
• High attention to details in the design
• Communicating effectively and professionally with customers and suppliers
• Participating in Design Reviews throughout each phase of the New Product Introduction process
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Following and contributing to the development of the Best Practice guidelines as laid out in Quality documentation
• Checking engineering packages
• Generating and/or revising specifications
• Participating in the validation of the product (using such methods as prototyping, test, DFMEA)
• Detail design of work packages
• Coordinate and consolidate electrical design from various product sites
• Good communication and leadership skills
• Travel up to 10% both domestically and internationally
• Any other reasonable engineering related duties

• Bachelor's degree in Engineering from a four-year college or university; and three-to-five years related experience and/or training; or equivalent combination of education and experience.
• MS Word, Excel and Outlook
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer (Cabin Systems)

Description:
• Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and System. This includes:
o Cabin interior monuments and Seats
o Cabin Management System
o Cabin Entertainment System
o Cabin Lighting and Cabin Switch Controls
o Telephone System
o Satellite communications
o Water System and Waste System
o EWIS

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad engineer experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-208
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Engineer (TSI)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:
• Experience designing data acquisition systems for aircraft and test lab environment.
• Working knowledge of force, flow, pressure and temperature sensing technologies.
• Knowledge of ARINC bus architectures; 664, 429, 825
• Experience with IADS data display and analysis software

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-244
Job Location: Savannah, GA
Rate: $52-57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****


Description
Researches and designs electrical systems for integration into various fixed wing platforms. Interpret customer requirements to research, develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Ability to work under little or no supervision.
- Familiarity with SAE AS50881 design guidelines.
- Understanding of ANSI/ASME Y14.100 or related design and drafting standards.
- Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis).
- Ability to create and review all electrical drawing types (schematics, cable harness, etc).
- Experience with AutoCAD or similar 2D design software tools.
- Demonstrated previous success working in a team based environment to meet objectives.
- Strong communication skills, both oral and written
- Active DoD secret level clearance.

Desired:
- Familiarity with C130 or other fixed wing aircraft.
- Experience with programming environments Labview and/or Matlab.
- Experience with engineering change process and/or configuration control process.
- Experience with Catia V5 or other modern 3D parametric modeling program.
- Experience with Teamcenter PLM software.
 
Job Number: 8749
Job Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Input Date: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer AAP

Description:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Wiring diagram creation, Wire harness creation, Wire installation drawing creation. Competent in circuit design, voltage, shielding.
• Able to coordinated vendors, manufacturing and other engineering personnel in development and testing to resolve problems. Usage of Auto cad and Catia V5. CHS is a plus but not required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
• Languages Required (in addition to English): None

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-235
Job Location: Savannah, GA
Rate: $62-$67
Per Diem: yes
Overtime: yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Harness Installation Engineering Contractor

Description:
PDS Tech is seeking an Electrical Harness Installation Engineering Contractor  for an open position in Savannah, GA.
In your role, you will:

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned



Education/Experience:
  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

 

Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 



Unique Skills:



Must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
In-depth knowledge of FAR 25 sub part H (EWIS) design requirements
Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) 


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

 
 
Job Number: 1710069290
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K38fAAC&URLSource=cjhunter

Electrical Systems & Analysis Engineer 3 -Secret

Description:
PDS Tech is seeking an Electrical Engineer for an open position in Oklahoma City, OK.
A US Government secret clearance is required for this position. 
In your role, you will:

  • Job Responsibilities will include but not be limited to:

    - Develop and document electrical load analysis based upon system design.

    - Provide coordination memos with impact analysis for systems design changes.

    - Present results of analysis at customer design reviews (PDR, CDR)

    - Publish reports detailing the aircraft electrical load and bus capability.

    - Utilize existing software to complete Electrical Load Analysis

    - Direct a team of engineers providing individual direction.

    - Leverage existing tools and help develop a path forward for a common tool for ELA.

    - Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.

    - Develops advanced technical ideas and guides their development into final product

    - Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and

    customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 1810079671
Job Location: OK City, OK
Duration: 9 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023dfSAAQ&URLSource=cjhunter

Electrical Systems Design Engineer 3 - (10 OPENINGS)

Description:
**Ability to obtain Secret Clearance Required**

Company is currently seeking an experienced Electrical systems Designer to perform Electrical Loads Analysis and power systems modification. Candidate will support Company Global Services & Support Aircraft.

Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.
This includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767 International Tankers and VC-25 presidential transport.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.
 
Job Number: 373049
Job Location: OK City, OK
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 05/26/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
This position is for an engineer that will perform wiring design and integration tasks associated with the Electrical Systems. This position will report directly to the Manager, Electrical Wiring Design.

Experience:
Seeking design engineers with experience in the creation and maintenance of aircraft systems wiring diagrams, parts lists, and electrical harness drawings. This involves detailed understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level.
The potential candidate must be capable of working independently, must possess excellent coordination skills, and must work well in a multi-functional team environment.

Duties and Responsibilities:
Background and demonstrated ability is required in the technical areas listed below.

­ Electrical Wiring and Harness Design
o Wiring standards and ‘best practice’ design
o Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
o Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
o Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
o Development of configuration managed, electrical harness design packages
o Parts lists, bill of materials, parts and standards callout
o Fabrication techniques for integrated wiring assemblies
o Cost, weight, and schedule trade-offs
­ Wire Diagram and harness drawing generation
o Interpretation of system interface control data to conceptual schematics
o Evolution of conceptual schematics into aircraft wiring information
o Use of wiring design tool to generate wiring diagrams and harness drawings
­ System integration as it applies to complex wiring assemblies
o Good overall working knowledge of aircraft electrical/electronic systems
o Implementation of wiring and harness level system separation to avoid common cause failure modes, including electrical signal and power separation
o Databus and digital equipment interface considerations

Education, Work Experience, Certification and/or Licensure:
­ BSEE or equivalent and minimum of 5 years applicable work experience
­ Experience with IGE-XAO, Mentor Graphics, or similar wiring design tool
­ Good working knowledge with Teamcenter, Microsoft Office suite, and SAP
­ Experience with Catia V5 is a plus
­ Experience with electrical harness routing and installation requirements is a plus
 
Job Number: 28-020
Job Location: Greensboro, NC
Rate: $45-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Electro Mechanical Design Engineer

Description:
PDS TECH INC. is seeking an E/M Design Engineer - UGNX located in Salt Lake City, UT

Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent our client in a manner consistent with its leading-edge technical reputation

Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team 
• Self-starter with strong analytical skills and a desire for constant improvement
Candidates MUST possess 6+ years of design and development engineering experience
Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
 
Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field

 
Job Number: 1810081773
Job Location: Salt Lake City, UT
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Natasha Raina
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dxEIAAY&URLSource=cjhunter

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.

Hours:
3rd Shift
 
Job Number: 169255
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.
 
Job Number: 169253
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Engineer Electromechanical - 4

Description:
PDS TECH INC. is seeking Engineer Electromechanical - 3 position located inSan Diego, CA.

Summary:



Applies electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Supports and participates in the design, test, modification, fabrication and assembly of prototype electromechanical systems






 


Qualifications
 

Basic Qualifications:


9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
Electrical Cable/Wire Harness routing design experience.
Familiarity and experience with CATIA V5 Computer Aided Design system. In particular, knowledge and experience with Electrical Work Bench within CATIA.
 
Preferred Qualifications:
Active DoD Secret clearance
Previous experience performing electrical wire-harness installation design on military aircraft
Experience with good design practice, such as SAE AS50881 or similar


 
Job Number: 1810081555
Job Location: San Diego, CA
Duration: 8 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dwXmAAI&URLSource=cjhunter

Engineer Mechanical - 4-DoD Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Engineer Mechanical 4 DOD Secret Clearance position located in Melbourne, FL. 

Summary:

The chosen candidate will have a demonstrated ability to perform design of aircraft secondary structures.  These secondary structures include, but are not limited to, crew systems, equipment integration, equipment rack design, and electrical wire (lines) and mechanical (tubes) routing and integration . This role requires an individual with demonstrated ability to perform integration activities, as well as a demonstrated ability to prepare build-to packages utilizing 3D modeling software.
 





Active Secret Clearance Required
 

Please send your resume to epetersen@pdstech.com or call 316-448-0890. 




Qualifications


 
Basic Qualifications:
Minimum of 9 years’ experience directly related to aircraft subsystem design and integration or equivalent years of experience and education. Demonstrate experience with 3D modeling software (NX or equivalent). Active DoD Secret Clearance.

 
Preferred Qualifications:
Bachelor of Science degree in Aerospace, Mechanical, Electrical Engineering or Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university.  Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing the NX software.


 
Job Number: 1810081428
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dvqDAAQ&URLSource=cjhunter

Engineer Structural- Secret Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Structural Engineer 3-Secret Clearance located in Palmdale, CA.

Clearance: Active Secret clearance required to start  (investigation within last 5 yrs.)

The successful candidate shall be able to perform stress analyses of metallic and composite aircraft structures. The position requires knowledge of aircraft stress. The position will require the performance of static of metallic and composite airframe structure using classical ‘hand’ methods and also using automated methods and procedures approved for the program.  Required skills include the ability to manipulate and pull loads from the Global Loads Models, and to build and apply loads to local breakout models. The stress analyst shall ensure that designs meet program requirements for strength, durability, and damage tolerance, and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives . The analyst should work well in a team environment and create high quality analysis reports and presentations.
 

Basic Qualifications:



  • 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD
  • Proficiency with NASTRAN, Patran, FEMAP, and Matlab


  • Complete understanding of structural analysis techniques, concepts and practices
  • Excellent written and verbal communication skills
  • Must be a self-starter and be able to handle multiple tasks in parallel

Active DOD Secret clearance with an investigation within the last 5 years is required.

Preferred Qualifications:

  • Experience with layout sizing and structural integrity evaluations of primary and secondary structure
  • Experience in composite structural test applications
  • Advanced knowledge in durability and damage tolerance analysis methods
  • Experience working in a liaison engineering environment, resolving MRB issues
  • Experience working on Special Access Programs
  • Experience working on military aircraft

 
 
Job Number: 1810082378
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002dzkMAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Systems - 3 / NX CA

Description:
1645
Engineer Systems - 3 (Job Number: 18005531)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 11, 2018

Target End Date: Jun 7, 2019

Pay Rate: $55/hr. - $58/hr.

Location : El Segundo, CA

Work week: 9/80

Duration: 1 year

Candidates must utilize a Systems Engineering approach to establish F/A-18 Support Equipment functional and performance requirements and advance through the solution concept development, trade studies, integration, hardware design, manufacture, test, verification and validation phases. Applicants must be familiar with 2D and 3D Computer Aided Design (CAD) utilizing NX (Unigraphics) and be experienced with layout, detail and assembly level design, as well as creating Bills of Material, and processing through the release cycle. Applicants will be responsible to ensure that Support Equipment requirements are coordinated with Integrated Product Team members, as well as with subcontractors and using customers. Candidates must be eager to learn, self-motivated and possess excellent interpersonal, and communication skills and also be proficient with the Microsoft Office tool suite. Candidates will follow through with designs though the fabrication, assembly, and/or acquisition process and will create fit/function/first article and acceptance test documentation.


Basic Qualifications:

-6 years with a Bachelor of Science: STEM degree or related educational field or equivalent experience plus at least 6 years of related experience
-Ability to create 3D CAD and 2D drawings using Unigraphics (NX) and Teamcenter
-Must have excellent written and oral communications skills and proven ability to work with / communicate with project team members
-Ability to solve complex technical problems and provide solutions which are innovative


Preferred Qualifications:

Experience in Support Equipment engineering, requirements generation, product development, design, acquisition, test and delivery.

-Experience with military aircraft maintenance, operations and field support
-Experience with tool design or special test equipment (STE) design and usage
-Experience with aircraft structure and subsystems design
-Experience with logistics databases and requirements
 
Job Number: MB-18005531
Job Location: El Segundo, CA
Rate: 55-58/hr
Per Diem: no
Duration: 1 year
Input Date: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS Project Analyst

Description:
Responsibilities and duties will include: Navigating the Japan unique E-2 wet wing design through the Navy's airworthiness process.

Supporting the Japan FMS team in troubleshooting technical issues with the E-2. Providing a conduit between the USN and Japan in country team to communicate issues and solutions to those issues.

Communicate with the domestic class desk on issues observed with USN aircraft that would be applicable to the Japan aircraft. Provide support to the IPT Lead to provide Programmatic Management Review support in the form of briefs and supporting documentation.

Provide E-2 knowledge on system performance and maintenance issues.

Education/Experience. The candidate must also have demonstrated experience in cost/benefit analysis, quality control, successful completion of critical path events and project tracking. Candidate must have ample Class Desk type experience to support the ability to perform the required tasking, and must already have at least a SECRET security clearance and maintain the clearance throughout the employment period. E-2 experience in a Class Desk type role is preferred.

Education and experience are contract required. Candidate should be proficient with MS Office products: Word, Project, Excel, and Outlook. The preferred applicant will possess excellent oral and written communication skills, and be comfortable working solo and in a team environment
 
Job Number: KM0005
Job Location: Patuxent, MD
Input Date: 04/26/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Flammability Engineer

Description:
JOB SUMMARY

Flammability Engineer reports to the Engineering Manager the Flammability Engineer responsible for review of engineering designs and development of flammability substantiation data to demonstrate compliance with regulatory and customer requirements. Specifically, this role is to support the Interior Structures Business Unit in the qualification, testing and certification of major aircraft interior commodities, and provide technical support for ongoing continued airworthiness. Role may include complex assignments such as managing several projects simultaneously in a schedule intensive environment.

JOB RESPONSIBILITIES

• Contributes to successful project completion by participating in the review of designs, regulatory/customer requirements, and qualification plans while developing substantiation data documentation to support project goals.
• Prepares flammability test drawings, test plans, test reports, and qualification documents.
• Reviews engineering design changes and prepares change-based documentation for flammability compliance.
• Candidate is required to possess a working level knowledge of fire property regulations including; 14CFR 25.853, and OEM requirements for smoke and toxicity.
• Candidate is required to possess a working level knowledge of FAA policy related to acceptable methods of compliance (MOC’s) for flammability.
• Supports fire properties testing including coordination for internal and external laboratory tests (Bunsen burner, Heat Release, Smoke Density and Toxicity).
• Work with customer design engineers, subject matter experts and FAA authorized Representatives to establish acceptable showing of compliance for flammability.
• Working knowledge of material qualification, process qualification, etc.
• Experience in material testing including ASTM standards testing.
• Knowledge of generating repair processes for MRB
• Experience in working with honeycomb structures’
• Basic knowledge and proficiency with team center (or related product data management system), including familiarity with aerospace drawing/document control systems for change management.
• Ability to work in a cross-functional manner with design, manufacturing, quality, supply chain, program management, and customer during product/data development to ensure all aspects are considered from the outset.
• Travel requirement – up to 10% both internationally and domestically.


• Bachelors degree from a four-year university or college and minimum of 3 years of experience that demonstrates:
o Knowledge of basic material characteristics, flammability of materials.
o Ability to interpret material and fabrication process specifications for non-metallic structure.
o Basic knowledge of composite manufacturing methods, vacuum forming, injection molding, composite materials, bonding, trim and finish.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Flight Control System Engineer - Safety

Description:
PDS Tech is seeking a Flight Control System Engineer - Safety for the Regional Jet Development Program.
This position is located in Nagoya, Japan.
 
SYSTEM EXPERIENCEAutomatic Flight Control System / Auto-flight (Autopilot, Flight Guidance/Flight Director/Auto-throttle).
Autoland (Automatic Landing System) for CAT3A and CAT3B operations.
Flight Controls System
 
TECHNICAL SKILLSAt least 01 Aircraft System Certification complete.
Experience with FAA/EASA certification.
Experience with AC/AMJ 25.1309.
Experience with ARP 4761.
Experience with Safety Analysis for critical functions.
Experice with following Analysis/Documents: AFHA, SFHA, PSSA, SSA, FTAs, FMEA, CMA.
Experience with following Aeronautical Regulation:
Part 25 FAR / CS 25
AC/AMJ 25.1309
AC 120-29A
AC 120-28D
CS-AWO

 
PROFESSIONAL SKILLSExperience with Safety Meetings Coordination with Pilots, Human Factors and System Engineering.
EXPECTED DELIVERABLESSFHA - System Failure Hazardous Analysis
PSSA - Preliminary System Safety Analysis
SSA - System Safety Analysis
FTA - Fault Tree Analysis
FMEA - Failure Mode and Effect Analysis
CMA - Common Mode Analysis
PERSONAL SKILLSFlexibility to travel for long periods (> 01 week).
Experience in multi-cultural environment.
Flexibility with work hours (depending on project phase it is required to do overtime).
Characterisitcs desired: Result oriented; pro-active; easy to relate; accountable for the tasks (move to resolve third-party dependencies) and self-oriented  when goals/process and not completely clear.





 

  • 10+ years experience
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610059924
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/25/2018
Firm Name: