Job Search Results

137 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/18 Monday 01:38PM Pacific Time by ContractJobHunter. )

Listings 1 - 137

Go To My Job Tracker

Expand all descriptions

Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 11/18/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter (Facilities Management)

Description:
The candidate will work on CAD Services & FM Interact Setup. FM Interact is a software platform that will help manage all 2.1 million square feet of space on the Windsor Locks campus. The software has to be configured to the site and requires initial setup by creating and entering CAD drawings, classifying the space type, and assigning occupant information. FM Interact training will be provided as needed.

Under the direction of the Senior CAD drafter and FM Interact System Administrator, this resource will:
• Work within the software platform to classify space type (office, support, factory, etc.)
• Assign occupants to workstations
• Provide database management
• Develop CAD drawings - FM Interact system setup.

SOLID BACKGROUND FROM TRADE SCHOOL OR ASSOCIATES DEGREE STRONGLY PREFERRED

Resources must be fluent in general computer applications and have a CAD skill set. Technical certification from a CAD program acceptable in lieu of an Associate degree.
 
Job Number: 1910106355
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 10/04/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Nesco Resource has an exciting opportunity for a CNC Programmer to join a fast paced and growing manufacturer in the Seymour, CT area. The opportunity is for  1st Shift, Monday-Friday.

The ideal candidate will have experience in Sheet Metal with the ability to work in a changing and fast-paced manufacturing environment.

... what you will be doing

  • Program all new jobs and existing jobs that require modifications

  • Develop programs for laser, turret and punch/laser combination machines using CAM software

  • Draw, modify or change model files using CAD software

  • Design and develop fixtures for new weldments and assemblies

  • Assist with design of special tools needed for fabrication

  • Assist management with 3D models and programs for equipment

  • Assist customers with design; develop and release blueprints to the operation for manufacturing and fabrication


What you will need to be successful:


  • High School Diploma or GED with 5 years related experience; or equivalent combination of education and experience

  • Strong knowledge of sheet metal in a manufacturing environment

  • Proficient in 2D CAD, CAM and Solidworks; ability to create drawings

  • Strong ability to communicate with customers both in oral and written forms

  • Ability to work efficiently with other key employees to accomplish good service for the operation and our customers


Hours: Monday - Friday 7:00 am  3:30 pm

Position Type: Temp to Hire / Right to Hire

Pay Rate: $20.00 to $25..00 Hr Depending on Experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-34892
Job Location: Seymour, CT
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-11-16 00:00:00.0
Start Date: 2019-08-22 00:00:00.0
Input Date: 08/22/2019
Last Updated: 09/22/2019
Firm Name: NESCO RESOURCE
Attention: Kristen Boroski
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Sr. ProE / CREO Designers

Description:
Minimum 9 years of design/drafting experience using Pro-E/Creo 4 CAD system.

Experience in vehicle or aerospace design (any kind of vehicle)
 
Job Number: PL CREO
Job Location: Sterling Heights, MI
Rate: $45-54/per hour
Per Diem: Possible
Overtime: possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 10/03/2019
Last Updated: 11/18/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia - Structural Design Engineers - NEEDED-

Description:
-Design Engineer will take responsibility for executing complex aircraft primary structural designs.
-Utilizing Catia 3D CAD software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts.
-Experience with Airframe and or primary aircraft structures _ - -kinematics experience desired.
-Bachelors in Engineering required
 
Job Number: 87435
Job Location: Mid-West
Rate: 70/80-hr W2
Per Diem: yes
Overtime: Expected
Duration: 12 month assignment
Start Date: 4/6 weeks
Input Date: 08/27/2019
Last Updated: 10/08/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer III ( Gilbert, AZ ) 9416509

Description:
Civil Engineer III ( Gilbert, AZ ) 9416509
6 Month Contact

Pay Rate: $40-45/hr , maybe more for the right candidate.

This individual will Plan, design and oversee the construction of new or expanded facilities. Prepare architectural, engineering, and cost estimates, functional studies, construction plans, specifications, and schedules. Obtain and supervise outside contractors. Recommend architectural and engineering design procedures and standards for the planning and design of facilities. Supervise the detailed design, budgetary costing, standardized construction, and final inspection of facility projects. Conducts construction surveillance to ensure adherence to contractual requirements.

Responsibilities include the following:
•Ensure all work conforms to the required specifications, including local, state and federal codes.
•Adhere to, company policies, procedures, and processes per the direction of the Facilities Project Manager.
•Work with outside engineers, architects, design teams, and general contractors regarding plans, specifications, general and special conditions, addendums, subcontract requirements, and bid paperwork including RFI’s are completed as required.
•Prepare estimates and work plans with detailed review of proposal specifications, drawings, and quantity takeoff information.
•Prepare design drawings for Facility Projects.
•Provide technical assistance, i.e., interpretation of drawings, recommended construction methods, materials, and equipment, etc., as required.
•Assist in contractor weekly job meetings.

Basic Qualifications:
2 years experience with Bachelor's Degree in Civil Engineering or related or 0 years and MS degree; i.e. experience working in a construction, or facilities environment.
Intermediate knowledge of Windows Office Systems; Excel, Word and/or MS Project, etc.
Working knowledge of blueprint reading required.
Computer-Aided Drafting and Design (CADD) experience required.

Preferred Qualifications:
Knowledge of Revit BIM Software.
Engineer-in-Training (EIT) Certificate issued from a state licensing board.
 
Job Number: 9416509
Job Location: Gilbert, AZ
Rate: 45
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 08/29/2019
Last Updated: 09/23/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Candidate will evaluate, select, and apply standard engineering methods, techniques, procedures and criteria, using independent judgment in making adaptations and modifications. Perform assignments, which have clear and specific objectives and require the investigation of a limited number of variables for Control System Engineering; supports the use of common work processes and procedures within assigned function across the TOS contract. Perform work, generally within Control System Engineering, which involves the preparation, interpretation or review of calculations, specifications, plans, investigations, surveys, structures, systems or equipment with relatively few complex features. Participate in one or more of the following: Development of system requirements. Automated Control System design, development, and/or maintenance. System design, including concept sketches and layouts. Automated Control and Human Machine Interface (HMI) Software Development. Preparation of specifications and design calculations

Preparing designs, drawings and data under the supervision of a more experienced engineer. Preparation of engineering studies and reports. Preparation of material quantity estimates. Uses engineering computer aided design/computer aided engineering (CAD/CAE) tools. System troubleshooting and return-to-service. System Verification and Validation Test Development/Execution. Draft letters for replies to vendor correspondence. Monitor schedule for own work. Review design documents of equipment manufacturers or subcontractors of a low to moderate degree of complexity, and prepare comments and recommendations. It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy. Perform other related duties as required.

Required: Candidate must have a Bachelor’s degree in Electrical Engineering or a related scientific discipline from a regionally accredited college or university (ABET accreditation preferred) or a sufficient number of specialized courses in relevant general engineering or appropriate engineering disciplines to meet job requirements. Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Basic skill in oral and written communication.

Desired: Candidate is desired to have an Active Secret Security Clearance, but not required to start. Basic technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems. Developmental experience such as practical work experience in design engineering or other relevant types of engineering such as systems startup, field engineering, or plant operation in large industrial plants, utilities, process plants or other engineering/construction firms. Developmental experience in the control system theory and design concepts such as Controls Strategy and Algorithm Development, Math Modeling/Simulations, Calibration, Motion Controls, Process Controls, Process Instrumentation, Sequencing Systems, Robotics, Stability & Control, Servomechanisms, Systems Safety, Networks & Field Busses, Control System Optimization, Learning and Rule-based Systems. Coursework or experience in the design or application of closed loop control systems. Coursework of experience in feedback control systems. Coursework or experience in the design of application of control systems using Programmable Logic Controllers (PLC). Coursework or experience with proportional, integral, derivative (PID) control systems. Coursework or experience developing control application and Human Machine Interface (HMI) software. Experience with GE PLC’s, automation hardware, and related software is highly desired.

This is an entry-level position

Must be a U. S. Citizen
 
Job Number: 19-012
Job Location: Tullahoma, AL
Rate: 25.00 -35.00 hrly
Input Date: 09/05/2019
Last Updated: 09/13/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 10/18/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 3 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.

Education:
1. Associate's Degree
2. Applicants must have good CAD drawing and change order drafting skills.
3. Experience with Cadence/allegro 17.2 or higher is required for this job.
 
Job Number: 11188
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 3 mos
Input Date: 10/10/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:

Electrical/Controls Engineer



Our Client is searching for an Electrical/Controls Engineer who wish to advance their career in the aerospace and/or power generation field. Reporting to the Engineering Supervisor, the primary focus of this addition to the Engineering Department is to analyze, control, modify, and execute programs in CNC Machine Controllers. The Electrical/Controls Engineer will also assist and/or define electronic control requirements of CNC equipment as well as plan and provide for control of programming to prevent accidental loss (i.e. power outage) and provide protection of data. Additionally, the person in this role will perform and assist in interfacing all machine/equipment upgrades or additions. Our client offers competitive wages and a full benefit package which includes medical (both a PPO plan and a high deductible plan), dental, vision, life insurance (both company provided and optional purchase by the employee), short and long-term disability, 9 paid holidays per year, paid vacation time and the chance to contribute to the 401K plan which has a $0.50 match for every dollar you contribute up to the first 6%. On top of all that, our client offers a clean and climate controlled environment to work in.



Essential Duties and Tasks:

Analyze , control, modify and execute programs in CNC Machine Controllers.

Fanuc CNC integration, repair and maintenance.

PLC, ladder logic, servo systems, variable frequency drive, digital and analog systems.

Utilize 2D and 3D computer graphics with some proficiency.

Perform diagnostic and follow-up maintenance on electronic equipment including, but not limited to PLC, robotic, and CNC controllers.

Define electronic control requirements of CNC equipment.

Provide advice to internal personnel on any equipment and tooling designs requiring electrical/electronic interface.

Coordinate electronic CNC controller programming with information systems.

Assist and support install of all new equipment.

Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment.



Qualifications, Education and Experience:



BS or AS in Electrical Engineering or 3+ years of experience building electrical devices and controls for machines used in manufacturing.

Ability to read machine electrical schematics of machines and electronics.

2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.

Knowledge of Ethernet wiring, basic network configuration and networking concepts.

Experience programming manufacturing machines (CNC, ladder, object-oriented programming).

Experience troubleshooting electrical, mechanical and/or computers.

Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.

Fanuc CNC experience a plus.

Ability to perform multiple tasks simultaneously.

Strong electronic and machine language programming skills.

Demonstrated ability to influence others positively in order to achieve positive work results.

Ability to communicate effectively at all levels with external and internal customers.

Ability to effectively work with skilled trades on various aspects of building CNC machinery.

Strong problem-solving skills with creativity and tenacity.

Occasional travel.



Always take ownership and be accountable for your actions. This job description is a tool to be followed. Other job duties my be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. Good and reliable attendance, positive attitude, and always take ownership of your job and team.



EEO Statement:



Our client provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability status, or any other classification protected by state, federal, or local laws. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of the characteristics. Discrimination of any type will not be tolerated.



Experience:




  • Electrical Engineering: 1 year (Preferred)

  • CNC machining: 1 year (Preferred)



Education:




  • Bachelor\'s (Preferred)



Benefits:




  • Health insurance

  • Dental insurance

  • Vision insurance

  • Retirement plan

  • Paid time off



This Company Describes Its Culture as:




  • Stable -- traditional, stable, strong processes

  • People-oriented -- supportive and fairness-focused

  • Team-oriented -- cooperative and collaborative



Schedule:




  • Monday to Friday

  • Day shift

  • 8 hour shift


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34669
Job Location: Mason, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-02 00:00:00.0
Input Date: 08/21/2019
Last Updated: 10/07/2019
Firm Name: NESCO RESOURCE
Attention: Mary Beth Principe
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer to provide direct support to Project Manager by interfacing with critical electronic component & subsystem suppliers. Manage engineering projects of moderate to large size and significant complexity, and of strategic importance.

Must have working knowledge of creating and integrating moderately complex electrical designs using CAD systems.
 
Job Number: 47407
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 10/31/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 09/26/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/18/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Inspector

Description:
We have an outstanding Contract position for an Entry Level QC Inspector I to join a leading Company located in Ann Arbor, MI.

**Position requires U.S. Citizenship.**

The Quality Control Inspector I examine products and materials for defects or deviations from specifications.

Major Responsibilities:
Inspects purchased parts and materials for conformance to specifications. Examines items for defects in materials, work, and damage occurring in transit, inspects and measures items for dimensional accuracy fit, alignment and functional operation according to prints, parts manuals, company standards, and other specifications.
Approves in-process production by confirming specifications; conducting visual and physical tests; communicating required adjustments, issues or trends to the Quality Control Lead.
Approves finished goods by confirming specifications; conducting visual and physical tests; returning products for re-work; confirming re-work.
During the inspection process, the Inspector may engage in preassembly-preparatory work such as cleaning of the housing, removal of excess adhesives, degreasing nuts, and screws, and the greasing of o-rings and seal rings.
During the visual inspection, the Inspector will look for any abnormalities such as dents, missing parts, and the general integrity of the product; the Inspector will also check for minor cosmetic issues such as scratches, nicks and switch operations.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
Quality Control knowledge
Desired Qualifications:
0-2 years of quality experience in a manufacturing environment.
Metrology knowledge and understating CAD drawings.
Knowledge and understanding of GD&T (geometric dimensioning and tolerance).
Ability to work on a team and collaborate with others.
Ability to communicate clearly and effectively.
 
Job Number: 35945
Job Location: Cypress, CA
Duration: 6 Month +
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Facilities Engineer

Windsor Locks, CT
$28.80/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
CAD Services & FM Interact Setup - FM Interact is a software platform that will help manage all 2.1 million square feet of space on the WLOX campus. The software has to be configured to the site and requires initial setup by creating and entering CAD drawings, classifying the space type, and assigning occupant information.

Additional:
Under the direction of the Senior CAD drafter and FM Interact System Administrator, this resource will:
- Work within software platform to classify space type (office, support, factory, etc.)
- Assign occupants to workstations
- Provide database management
- Develop CAD drawings
- FM Interact system setup.

SOLID BACKGROUND FROM TRADE SCHOOL OR ASSOCIATES DEGREE STRONGLY PREFERRED.
 
Job Number: 11489
Job Location: Windsor Locks, CT
Rate: 28.80
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Field Piping Designer - Jr

Description:
Field Walk down of P&ID’s.  At least 5 yrs experience 

some design and Cadworx knowledge would be a plus but not required


 
Job Number: 1910105624
Job Location: El Dorado, KS
Duration: 5 months
Input Date: 08/23/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GXAcQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Heavy Equipment Design Team Lead

Description:
*This is a full time, 2 year contract, located in York, PA*



We are hiring for a Design Team Lead, who will be working on Military Recovery Vehicles designing parts of the vehicle like stowage, AFES, recovery equipment (Winches, Boom, Spade), hydraulic subsystems, braking,steering and other operator controls such as heater, auxiliary power unit, engine and fuel systems. This project is for helping with the M88 modernization program.



Contrator's role will be that of the go to, IPT, small team project lead who will analyze, design, select materials, work with BOMs, work with CAD applications, create and adhere to schedules/milestones, budget, work with part specifications/procurement, supplier management.



Required:

*4 years experience designing mechanical hardware including brackets, covers and seals working on heavy construction equipment or other off-road equipment.

*Experience leading small design teams

*Understanding of ASME 14.100/Y14.5; Understanding of BOMs

*Familiar with part selection processes, working with procurement and sourcing of materials from appropriate venders

*BSME or similar Engineering Degree



Pluses:

*DoD experience/or working on military vehicles.

*Experience in the development and design of on-vehicle stowage provisions for equipment such as maintenance tools, deep water fording kits or other vehicle operator controls like braking, steering, shifting, throttle, and suspension control

*Familiar with developing and designing Stowage of special equipment
 
Job Number: 915
Job Location: York, PA
Rate: $49.20
Per Diem: yes split
Duration: 2 year
Input Date: 08/09/2019
Last Updated: 09/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Landing Gear Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Prior demonstrated experience in landing gear design and one or more of the following technical areas:
1. CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
2. Experience in mechanism design
3. Experience with metallic and composite design
4. Experience with GD&T (Geometric Dimensioning and Tolerancing)
5. Experience with hand stress analysis
6. Degree in an Engineering Discipline

Education:
1. Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 11318
Job Location: Palmdale, CA
Rate: $105.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/08/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/27/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Location: Savannah, GA
Rate: $40.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Perform productibility studies from engineering drawings.
5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
6. Incorporate Lean Manufacturing Methodology into existing and future processes.
7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
8. Support all Safety, Sustainability and Ergonomic Initiatives.
9. Aid in development and maintenance of Business Continuity Plan.
10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
11. Author DRDI/DMT rework instructions to support effective corrective actions.
12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.

Additional Functions:
1. Work on special projects.
2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
3. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Specialist certification or higher preferred.
 
Job Number: 11351
Job Location: Savannah, GA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 08/16/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. SAP, Solumina, Catia, and Smarteam

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 11381
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 08/21/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support.
2. Candidates must have experience with Catia V5.
3. Experience with Solumina and SAP is preferred.
4. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11005
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/28/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
2. Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 3+ years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10956
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
7. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
8. Keep current on state-of-the-art manufacturing developments.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. Develop business case and present to management for process improvement approval.
11. Assume the duties of the ME Group Head in his/her absence.
12. Assign and review work of subordinate personnel.
13. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
14. Lead/coordinate the implementation of projects between multiple orgs.
15. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
16. Support all Safety, Sustainability and Ergonomic Initiatives.
17. Author DRDI/DMT rework instructions to support effective corrective actions.
18. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
19. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 11370
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 08/20/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Mass Properties Engineers are responsible for verification & validation activities. Applies mass properties techniques in support of airplane modification programs, develops methods & procedures for mass properties estimation, supports mass properties tracking & allocation, ownership of mass budgets, supports airplane weight & balance measurements, & flight test programs.

Responsibilities:
Understand, plan, and execute technical activities in accordance with SNC policies, procedures, and work instructions and specific customer requirements
Perform mass properties tracking & allocation
Develop database tools used for mass properties management
Use parametric CAD modeling tools to extract pertinent mass properties data
Prepare weight & balance reports in support of airplane modification programs
Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements
Estimate costs and submit bids for Engineering


Requirements
Requirements:
Bachelor’s degree in aerospace, mechanical, or similar engineering and 5-10 years of aviation mass properties experience
Highly skilled in parametric CAD modeling experience required. (Solidworks experience preferred)
Must demonstrate strong computer programming skills, with emphasis on Microsoft Access, MATLAB, & Visual Basic
Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
Must work in a highly collaborative, fast-paced environment with emphasizes on strong computational & analytical skills
Ability to travel occasionally required
Ability to obtain/maintain a security clearance required
 
Job Location: Bedford, CO
Input Date: 09/20/2019
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Mass Properties Engineers are responsible for verification & validation activities. Applies mass properties techniques in support of airplane modification programs, develops methods & procedures for mass properties estimation, supports mass properties tracking & allocation, ownership of mass budgets, supports airplane weight & balance measurements, & flight test programs.

Responsibilities:
Understand, plan, and execute technical activities in accordance with SNC policies, procedures, and work instructions and specific customer requirements
Perform mass properties tracking & allocation
Develop database tools used for mass properties management
Use parametric CAD modeling tools to extract pertinent mass properties data
Prepare weight & balance reports in support of airplane modification programs
Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements
Estimate costs and submit bids for Engineering


Requirements
Requirements:
Bachelor’s degree in aerospace, mechanical, or similar engineering and 5-10 years of aviation mass properties experience
Highly skilled in parametric CAD modeling experience required. (Solidworks experience preferred)
Must demonstrate strong computer programming skills, with emphasis on Microsoft Access, MATLAB, & Visual Basic
Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
Must work in a highly collaborative, fast-paced environment with emphasizes on strong computational & analytical skills
Ability to travel occasionally required
Ability to obtain/maintain a security clearance required
 
Job Location: Bedford, CO
Input Date: 09/20/2019
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

Mechanical Design Engineer

Description:
PDS Tech is seeking a Mechanical Design Engineer, in Windsor Locks, CT.

Summary:
  • Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
  • Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Prerequisites:
  • Will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
  • This is an individual contributor level position. 8-15 years’ experience desired.
  • The candidate must be a US person.
  • Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required.
  • Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
  • Knowledge of drawings, geometric tolerancing, and drawing interpretation.
  • Experience with manufacturing techniques for limited production hardware.
  • Ability to work within a matrix organization to achieve team and program goals.
  • The successful candidate will possess a positive "can do" attitude, good presentation skills, respect for others, confidence, and patience.

Education:

  • Bachelors  


 
 
 
Job Number: 1910105538
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 08/21/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jennifer Morgan
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWw1QAG&URLSource=cjhunter

Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/19/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 11/18/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Drafter

Description:
Job Description
Major purpose: Mechanical Drafter will create details of fabrication and assembly drawings for manufacturing and assembly of the finished products. The primary area of expertise shall be the updating of drawings, creating parts lists, detailing of new components including machined parts for rotating mechanisms, and packaging of electro-mechanical, electrical, and microwave components. This involves creating CAD generated detail drawings of various machine type parts, brackets and assemblies.
Major functions: • This position reports to the Director Antenna Pedestal Design.
• Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics.
• Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM, CATIA, Pro-Engineer or SolidWorks.
• Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices.
• Determines scaling, inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning.
• Prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.
Technical/Functional skills:
Education/Experience/Licenses etc.: HS Diploma/GED and a minimum of three (3) years of hands on electro-mechanical work experience and the use of engineering drawings is required.
Must be experienced in the use of SolidWorks with a minimum of one (1) full year of classroom training including hands on experience.
 
Job Location: Simi Valley, CA
Rate: 34/hr
Per Diem: No
Input Date: 09/20/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Mechanical Engineer / Landing gear design experience required / CATIA V5 or Solidworks or Pro Engineer or Creo or Unigraphics or NX / GD&T hand stress analysis / degree required - Clearance CA

Description:
165951 Mechanical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 9/3/2019
End Date: 9/4/2020

Job Description:
Prior demonstrated experience in landing gear design and one or more of the following technical areas:

- CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
- Experience in mechanism design
- Experience with metallic and composite design
- Experience with GD&T (Geometric Dimensioning and Tolerancing)
- Experience with hand stress analysis
- Degree in an Engineering Discipline


Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1900-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 09/27/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Dulles, VA ) TS8946614 and TS9293043

Description:
Mechanical Technician ( Dulles, VA ) TS8946614 and TS9293043
8 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

Seeking TS/SCI candidates with 3-5 yrs+ exp in payload/spacecraft integration.

Manager is flexible on experience , wants Mechanical Techs with a active clearance

- Hands-on detailed work required, including extremely fragile space product installations, modifications, and general handling.
- Ability to demonstrate detailed technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams.
- 100% adherence to established ISO processes, diligence to detail, and efficient execution with quality results for cost effectiveness *absolutely required*.
- Ability to learn quickly. Bonding, taping, torquing, etc. with delicate honeycomb composite/aluminum panels and aluminum brackets a minimum. Must have 'a touch' for delicate equipment. Must have virtually zero defects in workmanship.
- Ability to proactively identify issues, escalate to appropriate channels, and *offer* solutions to engineering for review. -
- Ability to work with diverse team, take constructive feedback from QA support personnel.
- Experience with working inside Clean Rooms, Hazardous Material Handling, Hazardous Operations protocols, and related operational protocols required.
- Knowledge of Excel, Word, Powerpoint, general computer handling, and Tool Control required. ESD, FOD, and 5S management techniques required. 3D CAD, TipQA, Windchill, and CREOView preferred.
- Knowledge of advanced machine shop principles helpful. Little to no machine shop work is done by I&T Techs, but interfacing with Machine Dept. required on occasion.
 
Job Number: TS9293043
Job Location: Dulles, VA
Rate: Open
Per Diem: No
Overtime: yes
Duration: 8 Month
Start Date: ASAP
Input Date: 08/08/2019
Last Updated: 09/23/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: MoJave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer

Description:
Position requires HDI PCB design experience. HDI PCB Boards contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards. There are 6 different types of HDI boards, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs. Candidate should also have experience routing DDR3, Differential pairs and phase matching of signal up to 10 Gb/s. Must have Cadence Allegro version 16 or higher tool set experience. " IPC certification CID or CID+ preferred.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34998
Job Location: Palm Bay, FL
Rate: 81.08USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-09-08 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 08/22/2019
Last Updated: 09/26/2019
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Logistic Engineer 3 CA

Description:
1791 Principal Logistic Engineer 3 (Job Number: 19017930)

Number of Openings: 2

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Sep 16, 2019

Target End Date: Sep 11, 2020

Work Week: 9/80

Duration: 1 Year

Location: San Diego, CA

Rate: $39 - $41/hr.

This individual will perform duties as a Logistics Support Analysis for multiple programs in the Unmanned Systems portfolio in San Diego, California. The candidate will identify LSA candidates and maintain the LSA database. It is expected that the candidate will have an understanding of MIL-STD-1388/GEIA 007 in order to integrate the LSA products into the various Logistics disciplines and an understanding of the technical principles, theories and concepts of logistics engineering and aircraft design.

Excellent written and oral communication skills will be needed to act in a consultative role to other programs. The ideal candidate will be well versed in integrated databases, spreadsheets, and engineering data capture.


Basic Qualifications:
Bachelor of Science degree plus 5-9 years of relevant experience.

Preferred Qualifications:
Prior military aircraft helicopter maintenance experience is highly desired, unmanned systems experience, experience with CAD programs such as CATIA and with an LSA database tool such as EAGLE/SlICwave or experience using relational databases
 
Job Number: JK-1791ATO
Job Location: San Diego, CA
Rate: 41/hr max
Duration: 1 year
Input Date: 07/26/2019
Last Updated: 10/22/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Systems / Mechanical Test Engineer - Clearance CA

Description:
Principal Systems/Mechanical Test Engineer (Job Number: 19024355)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Dec 1, 2019

Target End Date: Nov 27, 2020

Pay Rate: $51 - $54

Work schedule: 4/10

Duration of Assignment: up to 1 year

Selected candidates are expected to perform the following…
Test Engineer
• Author and publish Test Procedures.
• Plan and arrange the labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
• Maintain metrics on status of testing and constraints.
Designer/ Mechanical Engineer
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work under general direction with minimal to no oversight, work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree plus 5 yr. experience in test operations.
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1797S5
Job Location: Palmdale, CA
Rate: 54/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Simulation Engineer / Tool Designer

Description:
Location: Chula Vista, CA
Rate: $48.50/HR (willing to go higher for the right candidate)
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split / Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****

Basic Qualifications:
1. Bachelor’s degree (BSIE, BSME, BSAE) from an accredited college, or equivalent experience/combined education
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication.
5. Experience with CATIA/DELMIA Simulation
6. Experience working with or supporting manufacturing / production environment.
7. Five plus years’ experience in producing Off Line Programming (OLP’s) using Delmia in manufacturing environment, preferably in an aerospace, but not required.
8. Automotive OLP experience is acceptable
9. Experience demonstrating mechanical aptitude for problem solving abilities and resourcefulness.
10. Must be proficient in Delmia

Required Competencies:
1. Ability to read and thoroughly understand technical Model Based Definition 3D Models/drawings
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Ability to identify and find specifications
4. Comprehensive Knowledge of Delmia & Catia V5 systems.
5. Attention to detail.
6. Ability to multitask in a fast paced environment.
7. Ability to work independently and as part of a team.
8. Ability to think independently and problem solve.
9. Good planning skills
10. Proven ability to work independently with limited direction and highly motivated
11. Proficient in Microsoft Office computer skills

Desired Skills:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Manufacturing simulation or virtual manufacturing tools – DELMIA
3. CAD applications - CATIA v5/v6
4. Discrete event simulation methods – Production Systems Simulation, DELMIA
5. Manufacturing Execution Systems
6. Digital work instruction tools
7. Augmented Reality (AR)
8. Automation/Robotics
9. Self-motivated change agent, has a bias for action and a sense of urgency, demonstrates accountability by holding self and others accountable to the team charter.
10. A demonstrated capability to think strategically and execute tactically.
11. Demonstrated communication skills, both written and verbal.
 
Job Number: 11115
Job Location: Chula Vista, CA
Rate: $48.50/HR +
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 10/10/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Project Engineer

Description:
We have a great opportunity for our client's Propulsion group!

Duration – 9-12 months
Exempt position (salary)
Pate Rate: Open

Experience:
Must have system level engineering experience on engine installations.
Turbo Prop install experience is preferable, but not mandatory.
Must have a BS degree (BSAE, BSME).
System testing required for PDR.
Experience with engine installation into aircraft for PDR.
Spec out system parts.
Coordinate/support manufacturing.
Select and manage suppliers.
Some experience with CAD software like Catia V5, UG NX, etc.
Experience doing thermal analysis of engine installations.
US Citizen or permanent resident.
 
Job Location: Manassas, VA
Rate: Open
Per Diem: Split
Duration: 12+ mos
Start Date: ASAP
Input Date: 11/13/2019
Last Updated: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QC Inspector I

Description:
We have an outstanding Contract position for a Quality Assurance Inspector to join a leading Company located in Ann Arbor, MI.

**Position requires U.S. Citizenship.**

The Quality Assurance Inspector I examines products and materials for defects or deviations from specifications.

Major Responsibilities:
Inspects purchased parts and materials for conformance to specifications. Examines items for defects in materials, work, and damage occurring in transit, inspects and measures items for dimensional accuracy fit, alignment and functional operation according to prints, parts manuals, company standards, and other specifications.
Approves in-process production by confirming specifications; conducting visual and physical tests; communicating required adjustments, issues or trends to the Quality Control Lead.
Approves finished goods by confirming specifications; conducting visual and physical tests; returning products for re-work; confirming re-work.
During the inspection process, the Inspector may engage in preassembly-preparatory work such as cleaning of the housing, removal of excess adhesives, degreasing nuts and screws, and the greasing of o-rings and seal rings.
During the visual inspection, the Inspector will look for any abnormalities such as dents, missing parts, and the general integrity of the product; the Inspector will also check for minor cosmetic issues such as scratches, nicks and switch operations.
Visually inspect the holographic image, glass components and housing by looking at the surface quality.
Physically inspect the holographic image, glass components and housing to assure every component falls within tolerance dictated by the product specifications and customer requirements.
During the inspection process, the holographic image, glass components and/or housing may require cleaning of smudges, removal of dust or debris and/or minor re-work.
Document inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database. When defects are found, Inspector notifies Quality Control Lead and helps analyze and correct production problems.
Perform image inspection by using VISIONx, a computer-based high-accuracy measurement system to inspect the holographic image for image brightness.
Pack, label and scan throughout in-process production.
Dresses appropriately for position; keeps self well groomed.
Is consistently at work and on time; assures work responsibilities are covered when absent; arrives at meetings on time.
Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.
Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to assure quality.
Demonstrates ethical and professional behavior in accordance with company values.
Perform job duties in a manner that maintains compliance with environmental, health and safety regulations, policies and procedures.
All other duties as assigned.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
Desired Qualifications:
0-2 years quality experience in a manufacturing environment.
Metrology knowledge and understating CAD drawings.
Knowledge and understanding of GD&T (geometric dimensioning and tolerancing).
Ability to work on a team and collaborate with others.
Ability to communicate clearly and effectively.

Work Schedule: 9/80
 
Job Number: 35945
Job Location: Ann Arbor, MI
Rate: 13.00
Duration: 6 Months
Start Date: ASAP
Input Date: 09/17/2019
Last Updated: 10/01/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
We are looking for a Quality Engineer to join our team. The successful individual will provide production support by performing the following activities:



This position supports the plant Quality department and systems to ensure support of process improvements, quality and new product activities, and promotes the use of performance excellence.

Areas of responsibility include:

Plant TL 9000 certification, internal auditing, supplier management, customer satisfaction and management of changes that impact quality metrics and systems. This position reports to the Quality Manager.

Day to Day Responsibilities:

  • Responsible for maintenance of Quality Management Systems

  • Supports preparation for TL 9000 certification

  • Supports document control and change management for the plant

  • Participates and/or leads customer notifications and supplier quality investigations

  • Technical support for first articles and receiving inspection

  • Participates in internal audits of Quality Management Systems

  • Responsible for identifying and providing training for internal auditors

  • Reviews document changes, process evaluations, and product deviations

  • Reviews key quality metrics (PPM) and develops improvement plans for manufacturing areas. Alerts appropriate levels on trends and critical quality issues

  • Responsible for ensuring supplier corrective actions are submitted and addressed in a timely manner

  • Lead/participate in supplier qualification

  • Participates on new product introductions

  • Responsible for ensuring process performance is tracked in key manufacturing areas and data is reviewed and reported

  • Ensures that sampling plans are adequate and Measurement System Analysis (MSAs) are conducted consistently

  • Executes quality assurance processes and systems to ensure that product meets all applicable quality requirements

  • Lead/support process controls and improvement such as identifying key process inputs and outputs, Critical to Quality (CTQ) and process control plan.


Hours of work/work schedule/flex-time:


  • 40 hours per week, additional hours/weekends when needed to support project work/quality issue resolution


Desired Skills:


  • SAP Quality and Material Modules

  • ASQ Certified Quality Engineer and certified ISO 9001 quality auditor

  • Six Sigma Green Belt or DMAIC project experience

  • Use of Lean tools

  • Knowledge reading and interpreting blueprints and Geometric Dimensioning and Tolerancing (GD&T) plans for manufacturing

  • Knowledge using precision measuring instruments

  • Knowledge of manufacturing of Optical assembly components and product attribute


Soft Skills:


  • Ability to work within a team environment (strong team player)

  • Proven self-starter, able to effectively handle high levels of uncertainty and change


Required Qualifications:


  • Bachelor's degree in Electrical Engineering

  • Three to five years of progressive manufacturing engineering experience

  • Jig and fixture design experience

  • Good analytical and problem-solving ability

  • Experience with 3-D CAD programs, such as Solidworks

  • Strong project management skills

  • Hands-on mechanical aptitude

  • Must display maturity and a high level of professionalism

  • Must know Ohms KW and Voltage

  • Must have Automotive Manufacturing experience

  • Proficient in Problem Solving

  • Work 50 hrs /week

  • Must be flexible

  • Carry a heavy work load

  • Proficient in SPC Charts Creating and maintaining

  • Manage the Quality Boards and Charts

  • Proficient in Problem Solving Forms

  • Team Player and work on your own

  • Excellent communicator and presenter


Authorized to work in the US for any employer

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-27978
Job Location: Irving, TX
Rate: 75.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 11/07/2019
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Systems/Mechanical Test Engineer 4 / NX10 GD&T - Clearance CA

Description:
Sr Principal Systems/Mechanical Test Engineer 4 (Job Number: 19023934)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Nov 1, 2019

Target End Date: Oct 30, 2020

Pay Rate: $62 - $65

Work schedule: 4/10

Duration of Assignment: Up to 1 year


Selected candidates are expected to perform the following:

Test Engineer
• Mentor and lead less experienced Engineers thru all phases of Static, Fatigue / Structural Test lifecycle.
• Author and publish Test Procedures.
• Plan and arrange labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Facilitate collaboration across disciplines during technical interchanges.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
Designer/ Mechanical Engineer
• Mentor and lead design Team, review designs for compliance, technically and requirements.
• Lead and provide mentorship to less experienced Engineers during CDR / PDR.
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong leadership, written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work with little to no direction and be capable and willing to lead and oversee the work of less experienced engineers. Must work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree with 9 yrs; 7 yrs. with Masters; 4 yrs. with PhD
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1796S5
Job Location: Palmdale, CA
Rate: 65/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Sr. Piping Designer

Description:
NEEDED - SR. PIPING DESIGNERS
WORKING IN ELDORADO, ARKANSAS ON NEW STEEL MILL PROJECTS
MUST HAVE CADWORX AND AUTOCAD EXPERIENCE
WATER TREATMENT (COOLING TOWER) EXPERIENCE IS A PLUS

 

 
Job Number: 1910100098
Job Location: El Dorado, AR
Duration: 6 months
Input Date: 09/17/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYgKQAU&URLSource=cjhunter

Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 09/17/2019
Last Updated: 11/18/2019
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Structural Analysis Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. Also your last investigation needs to be within the last 5 years****

Job Descriptions:
1. This position is for an Airframe Dynamics Analysis.
2. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures.
3. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis.
4. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

Job Requirements:
1. Structural dynamics/vibro-acoustics analysis experience on air vehicles is required.
2. Structural analysis hand calculation methods
3. Excellent verbal and written communication skills
4. Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
5. Finite Element Analysis (FEA)
6. ADAMS modeling and simulation
7. MSC NASTRAN/PATRAN
8. Familiarity with CAD modeling

Education:
1. B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
 
Job Number: 11122
Job Location: Palmdale, CA
Rate: $90.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
165274/1675-1
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 3
Desired Start Date: 6/25/2019
End Date: 6/24/2020

Job Description:
This position is for an Airframe Dynamics Analysis Team with Lockheed Martin's Skunk Works® Advanced Development Programs. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

• Structural dynamics/vibro-acoustics analysis experience
• Structural analysis hand calculation methods
• Excellent verbal and written communication skills
• Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
• Finite Element Analysis (FEA)
• ADAMS modeling and simulation
• MSC NASTRAN/PATRAN
• Familiarity with CAD modeling

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $90.00 Hourly
Experience
Technical Skills Vehicle Dynamics Yes 1 6 + Years
Technical Skills Knowledge of Dynamics and Control Areas No 2
 
Job Number: JE-1675-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/24/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Illustrator Sr.

Description:
Location: Savannah, GA
Rate: $37.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience with or knowledge of S1000D Illustration general rules and multimedia, 3D and 2D interactive content is desired.

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience.
2. 4 years exp in electronic technical illustrating.
3. Ability to operate Micro-Station, Adobe Illustrator and other Adobe illustration software.

Position Purpose:
1. Prepare, construct, and revise of Orthographic illustrations, Axonometric projections, Wiring and Schematic diagrams for technical aircraft manuals and other related graphical publications utilizing electronic methodology.
2. Must create and manipulate graphics and using MicroStation and CADAM technical illustrating system.
3. Must be functionally literate with 3 dimensional graphics, surfaces, wiring frames, and solids.

Principle Duties and Responsibilities:
Essential Functions:
1. Prepare, construct and revise MicroStation data (3-D, and 2-D data).
2. Prepare, construct, and revise orthographic illustrations, axonometric projections, and Wiring/Schematic diagrams on MicroStation.
3. Determine optimum graphic approach; independently prepare master artwork, charts, visual, booklets, and signs, working with all aspects of graphic arts production by utilizing electronic illustrating equipment.
4. Work with engineers, technical writers, customers, vendors, and suppliers to effectively visualize and conceptualize graphic design problems to include technical as well as non-technical graphics, color separations, overlays, and comprehensive type requirements.
5. Ensure illustrations conform to corporate, ATA 100, FAA, and commercial aircraft technical manual specifications and Gulfstream style requirements.
6. Maintain up-to-date knowledge of artwork techniques, materials, and equipment.
7. Experience working with equipment related to and associated with electronic illustrating tools, including: High-resolution scanners, PCs and related illustration software, printers, general knowledge of electronic publishing systems, related printers and data requirements.
8. Perform other duties as assigned.

Other Requirements:
1. Ability to read and interpret wiring schematics, blueprints and engineering orders.
2. Background familiarity with CADAM, Catia, and CCD. Mainframe user level operations, networks, and scanners.
3. SmarTeam experience a plus.
4. Knowledge of import/export of data files such as: (.dxf, tiff, .cgm, and iges) and electronic publishing are desirable qualities.
5. Knowledge of 3-D modeling and animation.
6. Working knowledge of Right Hemisphere software.
7. Video, motion or animation graphics experience a plus.
 
Job Number: 11213
Job Location: Savannah, GA
Rate: $37.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 07/22/2019
Last Updated: 09/23/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Test Engineer

Description:
Chipton-Ross is seeking a Test Engineer for an opening in Mojave, CA.

RESPONSIBILITIES:
Experienced test engineer specialist to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.
" Design tests plans and equipment for validation of complex mechanical or structural components and systems.
" Write test plans and procedures to define and support execution of tests.
" Interface with internal customers on integrated program teams to establish and verify specific test requirements.
" Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
" Analyze test data to verify test requirements and write test reports to document test results.
" Interface with external test laboratories to facilitate testing for Client design and analysis teams.
" Participate in the test engineering review, approval and release process.
" Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.

REQUIRED EXPERIENCE:
" 4-8 years' or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
" CAD modelling experience - Experience with Catia V5 preferred
" Experience with simulation and finite element analysis preferred - NASTRAN, Femap
" Experience with DO-160 environmental test standards for mechanical systems
" Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
" Focus on safety and reliability in testing.
" Results oriented approach to completing test activities successfully.
" Excellent verbal and written communication skills
" Excellent Organizational Skills and problem-solving skills
" Strong team player.
" Excellent computer skills, including Outlook, Word, Excel and PowerPoint

EDUCATION:
Accredited Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline.

WORK HOURS:
Full-Time


 
Job Number: 178682
Job Location: Mojave, CA
Rate: $DOE
Duration: 6 Months
Input Date: 06/10/2019
Last Updated: 11/18/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/13/2019
Last Updated: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Wire Design & Install Engineer

Description:
Chipton-Ross is seeking a Wire Design & Install Engineer 3 for an opportunity in Ridley Park, PA

RESPONSIBILITIES:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

REQUIRED EXPERIENCE:
CAD/CAM, CATIA V5, Knowledge of Basic Mechnical/Electrical Concepts, and PDM.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


WORK HOURS:
Full-Time/First Shift

 
Job Number: 181719
Job Location: Ridley Park, PA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 09/18/2019
Last Updated: 11/18/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Wire Design & Install Engineer 3

Description:
PDS Tech, Inc. is seeking a Wire Design & Install Engineer in Ridley Park, PA.

Summary:

  • Develops and maintains basic cable/wire harness detail and assembly designs.
  • Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
  • Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
  • Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities.
  • Collects data to support the development of statements of work.
  • Assists in data gathering of supplier capabilities.
  • Reviews functional and physical input used in the development of integrated design and system architecture.
  • Works under close supervision.

Prerequisites:
  • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


CategoryNameRequiredLevel 
Technical SkillsCAD/CAMNo   
Technical SkillsCATIA V5No   
Technical SkillsKnowledge of Basic Mechnical/Electrical ConceptsNo   
Technical SkillsPDMNo

 
Job Number: 1910106638
Job Location: Ridley Park, PA
Duration: 12 months
Input Date: 09/18/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJCwQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 3

Description:
Wire Design & Install Engr 3

Location: Ridley Park, PA
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General

Skills:
Category Name Required
Technical Skills CAD/CAM No
Technical Skills CATIA V5 No
Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No
Technical Skills PDM No

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-12881
Job Location: Ridley Park,, PA
Per Diem: Split Per-Diem available
Input Date: 09/19/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 3

Description:
Wire Design & Install Engr 3

Location: Ridley Park, PA
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General

Skills:
Category Name Required
Technical Skills CAD/CAM No
Technical Skills CATIA V5 No
Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No
Technical Skills PDM No

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-12881
Job Location: Ridley Park,, PA
Per Diem: Split Per-Diem available
Input Date: 09/19/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Installation Design Engineer- Job ID 37536

Description:
We have an Excellent Contract position for a Wire Installation Design Engineer to join a leading Company located in the Redmond, WA area. If you are interested, please include the job ID in your email.
Working under limited supervision, Interface with external and internal customers to develop and maintain wire harness detail, installation, and bundle assembly. Create and coordinate solutions for 2D and 3D wire harness installation designs and incorporates changes to the design plan. Performs complex design change incorporation as required. Provides functional and technical direction and guidance to support personnel and less experienced engineers.
Job Responsibilities:
Develop and maintain Wire Harness physical design and installation (e.g., 3D wire harness installation models, wire harness assembly models, and 2D formboard drawings).
Perform assigned tasks meeting the organization's expectations for quality, schedule, and process compliance.
Collaborate and coordinate with the customer to develop design solutions.
Contact subcontractors and suppliers to exchange technical data and coordinate project execution.
Ensures application of business unit best practices and identifies the need for enhanced processes, methods, and tools.
Translates technical program requirements into work requirements, processes, and tasks
Develops solutions to complex problems, which require ingenuity and innovation
Mentor less experienced staff in the use of CAD and other design tools.
Provide guidance and reviews of work as necessary.
Identify and communicate the need for enhanced processes, methods, and tools or new/enhanced design requirements and provides solutions.
Ensure design optimization through commonality, cost, weight, producibility, and maintainability of design.
Communicate and/or implement design solutions.
Ensure compliance to design requirements.
May confer with more experienced designers and other subject matter experts to interpret design concepts, determine nature and type of required detailed working drawings, and coordinates work with others.
Applying airplane and component production methods.
Experience in the fabrication design of electrical wiring, processes, and tasks.
Follows documented processes, specifications, and procedures that support the design and manufacturing of wire harness bundles.
Investigates moderately-complex manufacturing process or engineering related issues, and develops solutions to problems
Communicate and facilitate the implementation of 2D and 3D Wire. Harness physical design and installation between internal and external customers.
Focal for the common change process and engineering work statement definition.
Monitors and provides the status of wire installation activities at the airplane level.
Provide Major/Minor determination for change classification as a Design Approval Engineer (DAE).
Regular, predictable attendance is required.
Adheres to safe work practices and contributes to the evolution of health, safety, and environmental program and culture.
Other duties may be assigned.

Education and/or Experience:
Bachelor’s degree in Electrical, Mechanical, or Aerospace Engineering, or equivalent.
6+ years’ experience in an engineering classification.
3 years of CAD design.
5 years of Electrical/Mechanical design or installation.
3 years of Aerospace industry (preferred).

Knowledge/Skills:
Exercises broad latitude in determining technical solutions.
Is considered an expert in engineering principles, theories, technologies, and concepts in the assigned discipline.
Working knowledge of configuration management.
Understanding of product lifecycle management.
Knowledge of Fabrication/Manufacturing processes for applicable designs.
Capability to integrate overall System/Airframe designs.
Understanding of design requirements flow, validation, and compliance verification.
Able to understand technical data.
Proficient in 2D and 3D CAD design (e.g. CATIA, AutoCAD, Pro-Engineer).
Knowledge of MS Office computer applications; and Microsoft Word
 
Job Number: 37536
Job Location: Redmond, WA
Rate: 50.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: Mid November
Input Date: 10/25/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Back to Advanced Job Search