Job Search Results

144 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:22AM Pacific Time by ContractJobHunter. )

Listings 1 - 144

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Must be comfortable with Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 12463
Job Location: Fort Worth, TX
Rate: $65.57/HR
Per Diem: Split Possible
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.
 
Job Number: t3262
Job Location: Southern, CA
Rate: $55-$70/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The engineer also designs other tools to support Power Testing, Real-Time Operational Testing, CAN/1553/GbE/UBIM Testing, User friendly LabVIEW application S/W to control VXI, PXI, PCI, and GbE instruments, GO, NO-GO and Failure Area indicators, Electronic Personality Interface Adapters and high density common interfaces for quick change of LRU on test console.
 
Job Number: 48553
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Fort Worth, TX
Duration: 12 months

Description:
Client is seeking a Circuit and FPGA Design Electrical Engineer with experience in PCB design to join our team.

In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Comments for Suppliers:
Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer

Level:
Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 20-06504
Job Location: Ft. Worth, TX
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 7/1/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Release Comments: Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( Chandler, AZ ) 9899904

Description:
Electrical Engineer III ( Chandler, AZ ) 9899904
12 Month Contract

Pay rate: Open

Note: Active Secret Clearance Required

Experience in one or more of the following areas:
a) Ionizing radiation effects analysis & test for electronics systems
b) material science with emphasis on x-ray interactions with matter
c) electromagnetic effects (cable coupling, transient prediction/mitigation) from radiation (ionizing and non-ionizing radiation). Should be familiar with computational tools for modeling and prediction of effects.

Preferred Qualifications:
Preferred advanced degree (MS minimum) in physics, electrical engineering, material science, or mechanical engineering. Active Secret Security clearance or Top Secret is highly preferred

High dose rate (radiation) analysis and test (MIL-STD-883), computational FTDT methods, electromagnetic testing (MIL-STD-464/MIL-STD-461), familiarity with nuclear weapon effects, experience in testing/analysis of natural space radiation environment (TID; MIL-STD-883, SEE; JESD57/ASTM F1192), EEE part selection for aerospace systems, x-ray/gamma/beta/ion transport analysis.
 
Job Number: 9899904
Job Location: Chandler, AZ
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Test Technicican

Description:
Description

The manufacturing test technician supports manufacturing in the testing, and failure analysis and resolution, of medium to highly complex electro-optical sensors and assemblies. The candidate would have good knowledge of electrical measurements, and be familiar with using, Meters, Oscilloscopes, Signal Sources, Computers, and other equipment used in the testing of electronic and optical components and modules.
This is a hands-on position that requires a strong ability to work independently, as well as part of a team, to perform electronics testing and analysis of complex electronic assemblies and systems. The candidate must have good hand-eye coordination for work with small tools under a microscope. The ideal candidate will have a solid working knowledge of electronics, and a strong aptitude and interest in working with automated and manual test equipment as well as the communication skills required to work with engineering, management and other technicians. The candidate must be detail oriented and have meticulous record keeping skills.
Communication skills are extremely important as this role includes working with engineering on product introduction as well as training/supporting operators in the group.

Major functions:

Performs set-up, calibration, testing, tuning and troubleshooting of complex electro-optical circuits and components, instruments, mechanical assemblies and test stations. Will require use of a microscope and small tools as well as mechanical hand tools.
• Recognizes failures, and test set up problems, and determines appropriate corrective action.
• Operates a variety
Technical/Functional skills:
• of programmable test equipment (i.e. oscilloscope, function generator, meters, power supplies, etc.)
• Works from written and verbal instructions, test specifications, wiring diagrams and schematics.
• Records and maintains test data and assembly travelers.
• May assist more experienced technicians with more complex test procedures.
• May interface with Engineering to help solve design problems.
• Requires fully proficient job knowledge/skills.
• Preferred 2 years post-Secondary/AAS degree in Electronics or Electro-mechanical Technology with a minimum of 2 years prior related experience, or military equivalent. Minimum requirement, High School Diploma or equivalent, and a minimum of 6 years of prior relevant experience.
• Must have thorough understanding of electronics theory/measurements.
• Ability to work with small hand tools and use microscope.
 
Job Number: 132471
Job Location: Mason, OH
Rate: 26.50
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Aerospace - Bingen, WA next Hood River, OR)

Description:
Sr Quality Engineering Specialist - Bingen, WA

Job Description:
• Review technical drawings, work instructions, and engineering specifications for manufacturability, inspectability, and assembly.
• Control the quality of materials, products and services supplied to Insitu based on product specifications and design.
• Investigate part issues and perform root cause analysis and resolve product issues using closed loop corrective actions.
• Provide education and coaching to other Insitu departments on quality systems, regulatory compliance and quality initiatives to develop and improve performance and productivity.
• Design and analyze product inspection and testing processes, mechanisms and equipment.
• Provide technical solutions for a wide range of problems through imaginative, thorough, and practical results.
Skills & Abilities Required
• Ability to understand and interpret technical drawings and engineering specifications.
• Proven ability to assess manufacturing processes and make recommendations for improvements to ensure delivery of quality products.
• Proven ability to solve a wide range of difficult problems using root cause/corrective and preventive action standard practice.
• Experience working with ISO quality standards and other Aerospace standards (AS9100, AS9102, AS9103).
• Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
• Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).

Strongly Desired
• Knowledge of manufacturing processes, materials science, and prototyping techniques
• Knowledge of design and drafting methods including geometric dimensioning & tolerance
• Knowledge of engineering tests techniques, methods, equipment and instrumentation

Desired
• Knowledge of IPC standards (IPC-A-610, Acceptability of Electronic Assemblies, IPC/WHMA-A-620B Requirements and Acceptance for Cable and Wire Harness Assemblies)
• Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog).Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
• Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
• Six Sigma Certification
• Certified Quality Engineer (CQE)
Education & Experience
Technical bachelor’s degree and 5 or more years related work experience or a Master’s degree with 3 or more years. A technical degree is defined as any four year degree, or greater, in mathematics, sciences or technologies.


HOW TO APPLY:
1. REQUIRED: Email resume in MS Word Doc Format: albert.peniche@yoh.com


ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: AP001
Job Location: Bingen, Washington State
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer

Description:
Local Candidates to EL Seguno highly preferred

Job Description
Radar Electronics Department needs RF Subsystem Engineer(s). The department resides within the Hardware Engineering Center (HWEC) Center.
We require domain knowledge of RF systems, RF subsystems, Active Electronically Scanned Arrays (AESAs) and associated technologies. AESA technologies are used for military radar, electronic warfare (EW), and communications systems. The department is responsible for the full-scope of antenna product solutions, spanning architecture trades, design, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions.
The RF Subsystems Engineer will be responsible for performing analyses, developing subsystem models including subsystem in system models, and allocating requirements for the antenna, subassemblies and components. The primary role for this individual will support technical analysis, RF system performance predictions, antenna performance predictions, specification allocation and RF subsystem integration and test. Candidates should have experience in the design and development of state-of-the-art antenna and active electronic scanned arrays and RF subsystems for Radar, EW, communications, and/or other antenna systems across multiple platforms.

Required Skills:
•Minimum 6 years of related hardware design experience with at least 4 years of RF systems; Candidates should have experience in the design and development of state-of-the-art antenna and active electronic scanned arrays and RF subsystems for Radar, EW, communications, and/or other antenna systems across multiple platforms. •Proficiency with antenna theory/applications •Knowledge of AESA architectures and beamforming including analog and digital beamforming; RF system and AESA power and control subsystems; RF system integration and characterization. •Proficiency in RF system design, subsystem design, and architectural (functional and physical) trade analysis of antennas, transceivers, receivers, radiators, RF manifolds, and RF devices. •Proficiency with commercial RF system modelling tools, such as Keysight ADS, Keysight Genesys and SystemVue, National Instruments Visual System Simulator, Mathworks Matlab Phased Array System and RF Toolboxes, Mathworks Simulink, AGI STK. •Excellent communication skills. •Occasional business travel is required. •Must be able to obtain a DoD Secret Clearance within one year of start date; Active Clearance is preferred.

Desired Skills: - Experience with AESA integration and calibration
 
Job Number: BCCA295590
Job Location: EL Segundo, CA
Rate: $60/hr.
Per Diem: No
Overtime: Possible
Duration: 5 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Quality Assurance (SQA) Certification Engineer

Description:
The Software Quality Assurance (SQA) Engineer is responsible for oversight of internal and external (as required) Software/Hardware/Systems Process Assurance by participating in reviews and conducting audits throughout the product development life cycle. Activities are in compliance with Company and regulatory
requirements.

Responsibilities
• Supports and/or leads the development and execution of system/software/firmware quality assurance plans in order to comply with internal and regulatory specifications
• Assures system/software/firmware development process is executed according to internal and regulatory requirements through process audits, reviews and evaluations
• Participates in Planning, Requirements, Design and Coding reviews or audit reviews and their output as specified in the System Process Assurance Plan (SYSPAP)/Software Quality Assurance Plan (SQAP), and/or Hardware Process Assurance Plan (HPAP)
• Participates in the integration and test lifecycle as specified in the SYSPAP/SQAP/HPAP including reviewing or witnesses build and load procedures, audits of test cases and procedures, conduct Test Readiness Review, witness testing, approve transition criteria and conduct Software Conformity Review
• Maintains accurate quality assurance records for assigned projects per the SYSPAP, SQAP and/or HPAP
• Develops software quality metrics and conduct process improvement activities
• Liaison with development and verification engineers as required ensuring requirements are clearly communicated and resulting product meets all requirements.
• Provides support for FAA audits during development projects by way of leading audits, test witnessing and responding to questions/emails
• Provides guidance to development team(s) for certification questions and/or issues

Requirements
• B.S. in Computer Science or Electrical Engineering or a relevant field
• Thorough understanding of FAA Software/Firmware requirements (RTCA/DO-178 and RTCA/DO-254)
• 5+ years of related technical experience
• Familiarity with FAA Designated Engineering Representative (DER) Handbook Requirements (Order 8110.37) and ability to meet (within 12 months) the majority of requirements for Software and/or Airborne Electronic Hardware DER in preparation to become a Company DER
• Responsible for performing job duties in a manner consistent with established Policies and Procedures
• Independently determines and develops approach to solutions. Work is reviewed upon completion for adequacy in meeting objectives
• Frequent inter-organizational and outside company contacts
• Demonstrates understanding and wide application of technical principles, theories, and concepts in the field
• Strong interpersonal and communication skills including writing skills
• Ability to work without supervision. Independent problem solver.
• Works with other disciplines to support goals of the business
• Possesses foresight in identifying future problems and proposes potential solutions to the team (proactive).
• Intermediate Microsoft Office experience

Desired
• Knowledgeable on System Process Assurance requirements (SAE/ARP4754)
• Knowledgeable on FAA Database requirements (RTCA/DO-200)
• ASQ Certified Quality Engineer
• CSQE (Certified Software Quality Engineer)
• Experience utilizing Software and System Quality Assurance specifications such as AS9100, AS9006, AS9115 and ARP4754
• Experience with Jira, Confluence, Polarian, Collaborator and SharePoint
• Experience implementing CMMI program
• Aerospace or Defense Manufacturing experience




The Structures Company is an AA/EOE.
 
Job Number: 386
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Machine Tool Software Engineer

Description:
Sr. Machine Tool Software Engineer

My client is looking for Sr. Machine Tool Software Engineer. This is a contract position. Location is Kent, WA.

This is for a Sr. Software Engineer to develop custom software to control machine tools used to build rockets. Because of the unique nature of this position, you will work across multiple disciplines and face some interesting challenges.

For the right person, this job will be challenging, demanding, rewarding and a lot of fun!

Here are the details:

Job Description: Sr. Machine Tool Software Engineer

As part of a small, passionate and accomplished team of experts, you will be responsible for working closely with design and development engineers to support all software and control efforts related to building custom manufacturing process machine tools.

My client is seeking to fill a position for a Senior Software Engineer to participate in the development and support of both high and low level software as it relates to control, programming, and operation of novel custom machinery and processes in support of our mission of getting millions of people living and working in space.

This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight.

Required:
The software engineer who fills this role must be an experienced C++ software developer with a history of working across several interrelated domains including the following:

• Use and/or development of geometry-based libraries and algorithms
• Use and/or development of 2D and 3D visualization libraries
• Toolpath generation and visualization for multi-axis machine tools
• Development of real-time and multi-threaded software
• Communications over sockets, streams, serial ports, or other serial interfaces
• Interface to motion controllers and/or PLCs
• GUI-based user interface development
• Must be a U.S. citizen or permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Desired:
Strength or experience in the following areas will also be highly valued due to the cross-functional structure of the team:

• Motion control and system dynamics
• Brushless motors, encoders, and galvo systems
• Signal processing and data analysis
• Laser systems and optics
• Metrology, calibration, and error mapping/correction
• PLCs and field bus systems
• Electronics / Mechatronics

This is a really cool position at a very exciting company!


The location is Kent, WA.

The rate is open. The duration is 11+ months.

US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.

For immediate consideration please send your resume to: mmendocha@pdsinc.com.

If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!

Thank you!
 
Job Number: mm200626
Job Location: Denver, CO
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: July 2020
Input Date: 11/14/2020
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Michael Mendocha
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician

Description:
Prefer candidates that have Active Secret or current Interim clearance; *** This req is for 1st shift ***
Performs test, tune and troubleshoot of mid-range to highly complex military RF microwave hybrid assemblies. Duties also include using testing units over temperature, during vibration and mechanical shock as well as putting units into burn-in ovens; testing is performed using state of the art standard, specialized, manual and automated test equipment to specifications outlined in specific module performance specifications and acceptance test procedures. Use of the computer is required to retrieve test procedures, assembly drawings and schematics as well as to input test yield data.

Performs a variety of electronic or electro-mechanical assembly tasks in support of specific production units. Uses standard electronic assembly tools and materials. May perform modifications, rework and quality testing. Collaborate with RF Engineering, Manufacturing and Quality Engineering to develop procedures and troubleshoot product to specifications.

Skill/Experience/Education
Mandatory
•Previous experience in the test, tune, and troubleshoot of a variety complex RF Microwave Hybrid assemblies
•Ability to work under a microscope as required to test, tune and troubleshoot RF microwave hybrid assemblies and utilize hand tools such as torque drivers, tweezers and other similar tools; Good dexterity, eye/hand coordination
•Ability to read and work from detailed process sheets and drawings; Good computer skills are required to support retrieval of drawings and work instructions as well as other job activities; •Ability to work in a diverse team environment; Good interpersonal, teaming and communication skills
•Candidate must have a Secret Security Clearance/ Interim Clearance/ or ability to obtain a clearance (but cannot start until granted Interim).
 
Job Number: 2749
Job Location: Chelmsford, MA
Rate: 36
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Back to Advanced Job Search