Job Search Results

500 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/22 Monday 10:00PM Pacific Time by ContractJobHunter. )

Listings 1 - 500

Go To My Job Tracker

Expand all descriptions

4 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment (rapid prototyping environment or concept aircraft experience a plus).
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 12-months+
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 10/22/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2304 - AVIONICS SYSTEMS ENGINEER - cv. word doc only

Description:
Support of Compliance to Certification Authority; author Certification Plans

Provide specialist advice relating to test methods and procedures

Review testing readiness and conformities of assigned systems

Review qualification, ground and flight test data of assigned systems

Review flight test reports containing data demonstrating proper system operation as required by Certification Authorities Regulations

Review and Sign flight release documentation (including safety of flight judgments)

Review system performance analysis to ensure proper compliance to regulations

Coordinate with other Certification Authority Delegates for integrated functions (ie, Human Factor, Pilots, et al)

May provide technical leadership to a small engineering team for dedicated technical investigation / test.

Bachelor's degree in Avionics / Electrical/ Aerospace Engineering, plus 12-15 years' experience in Avionics systems design and certification.

Able to obtain a Certification Authority Delegation for assigned systems

Working knowledge of Rockwell Collins Proline 21 or Fusion Avionics Systems would be advantageous.

Must have excellent communication skills in English - both written and oral and be PC literate.

Experience in flight-testing of civil aircraft; and knowledge of TCCA, FAA, and EASA certification requirements (ie, FAA CFR Part 25) required.

Mirabel is just outside Montreal, Canada.
 
Job Number: 2304
Job Location: Montreal/Mirabel, Canada
Rate: $63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 12/03/2017
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2309 - PROGRAM ANALYST - cv, word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.

Have a bachelor's degree in Engineering or Project Management or a DEC in aeronautics or at least five (5) years of experience in aeronautics.

Have relevant technical experience in interior completion on Global Platform and knowledge of certification requirements, Aircraft systems and interiors.

Have knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

Are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

You drive for results.

Knowledge of aircraft structures, systems or interiors will be considered an asset.

Ideal candidate is someone that has already worked on the Global program with knowledge of SAP and BDI, BDM, MBOM.

Bilingual (English & French).
 
Job Number: 2309
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 12/15/2017
Last Updated: 03/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2312 - PROGRAM SPECIALIST - cv, word doc only

Description:
Participate at Change Board; identify and track changes that have the potential to impact customers post-delivery.

Work with multi-disciplinary teams to quantify program and
customer impacts from these changes and develop a decision matrix to assist with related Change Board decisions.

Determine a means to prioritize and mitigate these impacts; develop mitigation plans and track them to closure.

Lead a governance process that thoroughly vets and approves changes with proposed harmonization post-delivery; and serves as an escalation channel to senior leadership.

Bachelor Degree in Engineering and at least eight (8) years of relevant work experience in the aerospace industry; specific experience in change management and/or program management is an asset.

Varied experience across multiple functions in new aircraft development programs and in particular during the Type Certification and EIS phases.

Demonstrate excellent communication skills in both English and French.

Are self-motivating and can work autonomously.

Possess strong project management skills.

Are familiar with applications such as Microsoft Project, Word, Excel, PowerPoint and Outlook.
 
Job Number: 2312
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2314 - AVIONICS SYSTEMS INTEGRATOR - cv - in word doc only

Description:
Responsible Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and
responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems;

Participate in the Avionics Systems architecture design to meet

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required;

Support the Final Assembly Line and In Service Aircraft for any development issues;

Manage, review and approve the deliverables of the Avionics System Suppliers;

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress;

Support other departments such as Production, Customer Support, Program Office and Product Planning;

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities;

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent;

At least three (3) years of relevant experience with the design,

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft;

Good knowledge of RTCA documents DO-178 and DO-160;

Familiar with part FAR25/525 certification process and with the ARP4754 standard;

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment;

Strong communication skills (written and spoken).

Be able to travel is a must - USA &Toronto.

English - French working knowledge an asset
 
Job Number: 2314
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wkp
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/04/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2316 - PROPULSION-PNEUMATIC SYS. ENGINEER - cv in word doc only

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years%u2019 experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc).

Must have a good knowledge of propulsion and air systems and their integration on the aircraft (APU Engines, low pressure and high pressure air systems, FIDEEX Systems, Fuel Systems).

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems.

Able to to travel. Occasional business trips to Toronto and frequent travel between plants in Montreal. Will travel to Toronto, Pitfield and Air Canada Hanger in Montreal.

Must be familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular Shift = Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).
 
Job Number: 2316
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2317 - HYDRO-MECHANICAL SYS. INTEGRATOR - cv - word doc

Description:
Support the Global 7000/8000 Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports.

Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations.

Recommend and review design changes.

Develop good working relationships with various departments within the company and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Experience in providing engineering support to a Final Line/ Production.

Must have experience in the definition and certification of at least one complex aircraft control system.

Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.
 
Job Number: 2317
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/08/2018
Last Updated: 04/11/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2320 - PROCESS ASSURANCE ENGINEER - cv - word doc only

Description:
Support the development and maintenance of process assurance plan(s).

Support the definition and development of the Bombardier Process Assurance processes, checklists and deliverables.

Plan, coordinate and participate in internal and supplier process assurance oversight activities.

Generate process assurance reports and process assurance findings as a result of the oversight activities.

Review and assess acceptability of corrective action plans addressing identified process assurance findings.

Conduct follow-up of corrective action plan implementation.

Collect measurements and provide metrics to support the development of regular visibility reports related to process assurance execution as well as oversight activity results.

Support the development and delivery of training to DADs / Integrators / Engineering Specialists in the Process Assurance methodology.

University degree in Engineering (or equivalent) with 5 to 10 years experience in the aerospace industry.

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Experience in the development or verification of aircraft systems (using ARP4754A/4761 or equivalent standard) is required.
(The candidate may also have experience in the certification, development or testing of Software or airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-178B or DO-254 or equivalent standard).

Knowledge of airworthiness, process assurance and/or quality assurance processes and requirements.

Display strong interpersonal and professional demeanor as a business representative of the company.

Must be willing to travel to support the process assurance audit/inspection activities.
 
Job Number: 2320
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2322 - ELECTRICAL HARNESS DESIGNER - FINAL LINE - cv - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics

Review WD, Catia Models and issue NIEO

Provide solution for NCR disposition by MRB

Integrate the design of the wire harnesses

Incorporate changes (RFC, PCR) on the harness data reports

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality

Contribute to other relevant tasks needed to support the team%u2019s objectives

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Experience with harness manufacturing or methods.

Minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Experience with Mentor Graphics Harness XC tool and Catia V5.

Strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Comfortable working with MS office suite.

Familiar with BM's, RAE documents and BAPS related to harnesses

Competencies

As our ideal candidate,

Communicate clearly and openly with your team

Embrace changes and new ideas

Persistent in reaching your goals

Seek out and accept feedback
 
Job Number: 2322
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2323 - PROJECT MANAGER - cv - word doc only

Description:
Ensure that all activities are aligned with other activities of other cells and maintain regular contact with the people involved.

Coordinate activities to ensure the achievement of the required harmonized way client.

Work independently on a multitude of records (plans) that affect all the expertise involved in the realization of the objectives seeking the capacity to suppliers to ensure timely delivery of various required.

Ensure communication and information sharing among all contributors of development activities to ensure alignment.

Responsible for the timely delivery of various documents of the meetings of the organization (governance).

Plan and monitor plans following delivery of various components.

Work closely with QA team on the floor as well as the upstream supplier management team.

Start the charging process to suppliers in collaboration with the team management of upstream suppliers.

Make the upstream monitoring of non-compliances identified in collaboration with the team of supplier management and ensure to identify the 'top 3'.

Audit suppliers on quality processes in place for the company.

Ensure the maintenance of the objectives of the cycle time with the/suppliers.

Respond to emergencies that stop the production line that are connected to non-quality suppliers.

You will work directly with the product (work closely with production management).

Bachelor's Degree or a Technical Degree and a minimum of 5 years of relevant experience in the aerospace industry.

Experience in Project Management or Project Engineering, certification in Project Management is an asset.

Must have a good knowledge in Quality procedures, processes and systems.

Must have a very strong experience in the assembly of aircraft (structural and systems).

Must have experience working in a Manufacturing environment in the aerospace industry.

Must have experience with NCMS Systems.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Knowledge of SAP is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Knowledge on implementation of change management activities is an asset.

Must have excellent communication skills, both written and verbal in both English and French.

Full flexibility is expected. May be on-call, shift work,
rotational work, weekends, odd hours, etc.
 
Job Number: 2323
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 9+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2327 - HYDRO-MECHANICAL SYSTEMS - FINAL ASSEMBLY LINE

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Have a Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Have experience in providing engineering support to a Final Line/ Production

Have 15 or more years experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Are Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips to Toronto and frequent travel between plants in Montreal.
 
Job Number: 2327
Job Location: Toronto, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 03/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2330 - AVIONICS SYSTEMS SPECIALIST - cv, word doc only

Description:
Review Systems architecture design to meet Aircraft Design Requirements & Objectives;

Participate in validation and lead verification activities of assigned system requirements;

Manage, review and approve where appropriate, the deliverables of the assigned system;

Plan short to medium term activities required to support development and certification of assigned system;

Chair weekly integrated product development team with cross-functional engineering discipline;

Keep accurate detail records and artifacts;

Write issue papers, advisory circular compliance matrices and certification plan;

Reviews and sign certification design compliance reports;

Reviews and sign electrical system schematics;

Support the flight test program; including witnessing of tests as required.

Have a bachelor%u2019s Degree in a relevant engineering discipline

Have at least 5 to 10 years relevant experience with the design, development, integration and certification of avionics systems; previous experience with Flight Management System, network security, Air Data, Communication / Navigation would be an asset.

Have familiarity and understanding of pertinent TC, FAA and EASA rules and requirements.

Have the ability to work well in a team environment.

Have the ability to travel.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Must have a good knowledge of RTCA documents DO-178 and DO-160;

Must be familiar with part FAR25 / 525 certification process and with the ARP4754 standard;

Must have an experience with civil aircraft and airworthiness authorities (asset);

Must have strong communication skills (written and spoken).

Must have excellent troubleshooting skills.
 
Job Number: 2330
Job Location: Montreal, Canada
Rate: 66.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/01/2018
Last Updated: 02/23/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2335 - PROGRAM ANALYST - cv word doc only

Description:
Define PMO governances & meeting agenda, prepare necessary content (strategy, proposed schedule, business case, etc.) with all key stakeholders to accelerate decision making, communicate minutes of meeting, and follow-up on actions.

Lead projects within the Program Office organization in accordance with various elements of change or program decisions which impact the Final Line baseline activities and schedule.

Establish project schedule and drive the team toward defined milestones.

Lead or facilitate project governances, integration, communication, evaluation and execution reviews, approvals and eventually implementation into design and product with internal and external stakeholders.

Identify risks associated with schedule/milestone adherence and provide visibility on the mitigation plan.

Provide support and prioritization to Technical Focals/ Project Focals/Logistics Focals and Supplier Readiness teams

Identify gaps, monitor and propose improvements to supplier performance with supplier readiness team.

Provide visibility on supplier performance shortfalls and work with key stakeholders to neutralize gap.


Bachelor's degree in Engineering or Project Management and have at least five (5) to seven (7) years of experience in aeronautics.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Knowledge in Project Management.

Have experience in the manufacturing industry (an asset).

are proficient with Microsoft Office Suite (Word, Excel, PowerPoint, and Project).

Have a good interpersonal, leadership & communication skills.

Are customer-oriented and innovative in problem solving.

Show an open mind and a great ability to work as a team player.

Must have a sense of organization, time management and you demonstrate autonomy.

Are driven for results.

Are bilingual (English & French).
 
Job Number: 2335
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 05/03/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2336 - SR. ELECTRICAL WIRING DESIGNER - cv. word doc only

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Engage interior system stakeholders and meet results

Provide technical leadership to team.

Identify and manage technical risks & opportunities

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Must have Knowledge of New EWIS Regulations.

Competencies:
You communicate clearly and openly with your team.

You embrace changes and new ideas.

You are persistent to reach your goals.

You seek out and accept feedback.
 
Job Number: 2336
Job Location: Montreal, Canada
Rate: 59.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2339 - FLIGHT DECK DESIGN & HUMAN FACTORS SPECIALIST

Description:
Define operational, functional and crew interface requirements and concepts,

Perform Analysis (task, flow, etc.),

Define Development and certification test requirements, Define simulation and prototyping requirements,

Define Test methodology, e.g. Workload, Error, Usability, etc

Perform Human Error Analysis,

Report design related issues,

Participate to problem solving,

Prepare documentation: Certification plan and report, Test plan, test card, observation grids, error log, etc

Participate and provide assistance in design reviews, liaise/interact with Flight Ops and Customers (pilots), liaise/interact with suppliers/partners, interface with certification authorities (Transport Canada, FAA, EASA), prepare technical presentations to management when requested.

Possess a Bachelor Degree in Engineering or equivalent.

Master's Degree in Ergonomics (or equivalent) is an asset.

Have at least 11 years' experience in aircraft systems development including user interface design and evaluation preferably.

Have a very good understanding of Flight Deck design standards (Mil STD, SAE ARP, ISO, etc) including aircraft systems operation and user interface design, automation principles, verification and validation methods, human reliability and safety requirements.

Have the ability to work without supervision, be organized, a team player, a self-motivated person, be Customer focused, and be able to work under pressure.

Show initiative, a strong sense of responsibility, and have an excellent technical judgment.

Must have a good knowledge of Part 25 certification process for Human Factors.

Previous experience in the definition and certification of at least one complex aircraft control system or avionics would be an asset.

Knowledge of Human or Maintenance Error Analysis is highly recommended.

Must have experience with Human Machine Interface test data analysis.
 
Job Number: 2339
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 02/09/2018
Last Updated: 03/13/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2018
Last Updated: 10/22/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Composite Structural Design Engineers Needed

Description:
Composite Structural Design Engineers - Multiple Openings
Location: Virginia
Duration: 12+ months

Composite Structural Design Engineer Responsibilities
Design-to-build activities for a Military aircraft composed of primary composite and secondary composite and metallic structures.
Composite Structural Design Engineer Requirements
- Education: A BS degree is highly desired
- 10 years of experience in Aerospace
- 6000+ hours experience with CATIA v5 (Part Design and Generative Surface Design (GSD) a plus)
- At least 2000 hrs on V5R23 or higher
- Entirely 3D CAD Design using Model Based Definition (MBD)
- Experience with ENOVIA\SmarTeam
- Experience with CATIA Functional Tolerancing and Annotation (FTA) workbench-300 hours
- Experience with CATIA Composite Part Design (CPD) a plus
- SmarTeam experience is preferred
- Ideal Candidates : Familiar with GD&T for MBD. Lack of or limited MBD workbench with tolerancing may limit contractor's duration on the program.
- Able to move around a production facility

The Structures Company LLC is an AA/EOE.
 
Job Location: VA
Rate: $55-70/hr DOE
Per Diem: Yes
Overtime: No
Duration: 12+ month
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Denver, CO

Description:
STS AeroStaff Services is currently hiring Aircraft Data Entry Operators for open positions in Denver, Colorado.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Data Entry Operators will oversee all aspects of Records retention, maintaining accurate records for each aircraft and components. Audit online records and approved maintenance record database daily, ensuring all maintenance entries are accounted for and accurate. Organizes and reviews all aircraft data relating to the TCI, aircraft flight times, aircraft log pages, and maintenance activities that have been performed on the aircraft to ensure proper airworthiness in accordance with CFRs.

Job Duties:

• Ensure the accuracy and completeness of all records; update databases for lease return and induction activities; Scan or upload all documentation to the ERRP.
• Read & interpret technical data, to be input in the maintenance database, as required.
• Ensure all maintenance records received into Aircraft Records are entered into approved maintenance record database daily.
• Scan, Audit, and index all documents into the ERRP to comply with the FARs.
• Audit the documentation for accuracy and completion as outlined in the GMM & FARs.
• Accurately track all serialized components on the aircraft.
• Record hours/cycles daily; correct aircraft hours and cycles on parts tags, EOs, ADs, FCDs, and A-Checks for accurate data input into the Maintenance database.
• Enter component removal and replacement in the maintenance database; ensure that part numbers and serial numbers are accurate.
• Perform other duties as required or directed from supervisor of the department.

Qualifications:

• High school diploma or GED & the ability to interpret technical data.
• Four years of aircraft related work & familiarity with Aviation terminology.
• Effective oral and written communication skills.
• Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
• Preferred - Experience with aircraft MRO systems & Experience with electronic records management systems.
• Preferred - Previous aircraft records experience.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 35489
Job Location: Denver, CO
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Orlando, FL

Description:
STS AeroStaff Services is hiring Aircraft Data Entry Operators in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Maintains aircraft and engine logbooks and associated records
• Proficient performing all operator, data entry and retrieval functions associated with aircraft recordkeeping
• Performs networking functions between individual stations, including analysis and correction of errors caused by software, hardware or data entry
• Transmits and receives data via floppy disk, modem and other electronic means
• Extracts data, formulates and interprets management reports, creates archives, backups, and data saves in support of Station Aircraft Maintenance operations
• Performs a wide range of clerical and administrative duties related to aircraft maintenance, such as preparing reports and correspondence, filing and typing, performing data base and systems analysis
• Performs requirements in accordance with the procedures established in by the customer

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39849
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Inspectors - Kingman, AZ

Description:
STS AeroStaff Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with an Aviation Recruitment Professional directly, call 1-877-707-5767. Our job placement services are always free, and we are open seven days a week. Reach out at any time!

We now offer Aircraft Inspector jobs in Kingman, Arizona!

Job Duties:

Will be responsible for maintaining practices and procedures contributing to a safe, profitable, positive and fun work environment
Will ensure that work performed for Part 121, 125, 129 and 135 operators is done in accordance with their requirements and procedures
A thorough understanding of the inspection methods, techniques, and equipment used to determine the airworthiness of the article, including visual inspection aids
Verifiable experience on Embraer 135/145 Ensures completeness and accuracy of all paperwork
Performs other duties as specified by Director of Quality Control
Required:

Must be at least 18 years of age
Must have High School Diploma or GED certificate
Must have a minimum experience of 5 years’ aircraft maintenance and at least 2 years’ of aircraft inspection experience
Must be qualified under FAR Part 65
Must have a valid state driver’s license
Must have a valid FAA Airframe and Powerplant (A&P) license
Must be able to read, write, and speak English
Preferred:

Experience on Embraer 135/145 and/or Bombardier CRJ 200
Prior experience as an Inspector
Experience on regional jets
Lean Six Sigma Training
Basic computer skills
 
Job Number: 41482
Job Location: Kingman, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Kitting Technicians - Atlanta, GA

Description:
STS AeroStaff Services now offers Aircraft Kitting Technician jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of the Logistics Supervisor, the Kitting Clerk will assemble Aircraft Parts and interior Integration kits using released engineering design data and parts lists.

Job Duties:

• Read and understand released engineering data to include parts lists, drawings, test plans and service bulletins
• Maintain correct revision level of manufactured parts and parts lists
• Ensure parts and installation kits are properly identified and labeled
• Ensure proper certification paperwork is maintained with parts throughout kitting process
• Perform work in a neat and organized manner within estimated or budgeted hours while maintaining high standards of quality
• Operate necessary equipment for the packaging of parts and kits
• Complete all required paperwork for kitting and certification
• Safely operate forklifts (sit down and standup), pallet jacks and hand trucks
• Perform all other duties assigned by Logistics Supervisor or Supply Chain Planning Manager
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Experience in performing Kitting in a manufacturing type of environment preferred
• Familiarity with STC, Conformity, and PMA part requirements preferred
• Able to use manual hand tools (i.e. hammer, drill, pry bar, etc.)
• Previous forklift experience or the ability to learn how to operate forklifts
• Must be able to read and understand released engineering data, parts lists, drawings, test plans and service bulletins
• Must be a self-starter requiring minimum supervision and able to perform job assignments with a very high degree of accuracy
• Should have knowledge of typical PC/business software applications (i.e. Word, Excel and Internet)
• Must have excellent interpersonal skills and be able to interact with a wide variety or people
• Must be able to work in a fast paced environment and maintain a high quality of work
• Must be able to work flexible shifts to include overtime and weekends (as needed) in order to meet customer schedules and needs of other departments
• High level of manual dexterity and detail orientation
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41354
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Programs Coordinators - Ypsilanti, MI

Description:
STS AeroStaff Services is hiring Aircraft Maintenance Programs Coordinators in Ypsilanti, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Ensure scheduled maintenance is issued and accomplished within calendar, flight-hour and flight cycle limits as specified by Maintenance program, Federal Aviation Regulations, Airworthiness Directives and Special Inspections
• Work with the Quality Control department in reading, interpreting and implementing Airworthiness Directives and Service Bulletins; and researching aircraft records
• Work with Maintenance Control, Quality Control and Stores to ensure personnel and materials are in place for work to be issued
• Use company data base to: Monitor aircraft Location, TAT & TAC, Forecast maintenance, Create work orders and Maintenance Tasks
• Create and update Maintenance Action Plans (MAP), Fleet Campaign Directives (FCD), Advisory Notices (AN), Reports, Forecasts, Work Scopes, & Maintenance Check Packages
• Prepare, issue, and audit maintenance check work packages
• Assist in the implementation of new aircraft into the Air Fleet

Qualifications:

• Must be a U.S. citizen
• 3 years’ experience in large aircraft heavy maintenance (A&P License/QC experience preferred); or 3 years’ experience in large aircraft heavy Maintenance Planning
• Experience in reading and understanding Airworthiness Directives (AD) and Service Bulletins (SB) to determine: Effectivity to the fleet (Group, Configuration, Condition); Required actions & constraints; Required materials (parts & tooling); Required number of persons & skill set, task hours, and aircraft ground time to accomplish task; & Applicable SB Work Instructions, Figures, & Tables
• General knowledge of large aircraft systems and structures (Boeing 747-200 and -400 Series preferred)
• Working knowledge of large aircraft manuals (i.e. AMM, IPC, SRM, MPD, CPCP, SSID, NDT, RAG)
• Computer experience with Aviation Data Bases, Microsoft Word and Excel
• Read, write, and understand spoken and written English
• Create and update routine reports and correspondence in Microsoft Word & Excel formats
• Create logical/coherent/grammatical messages using Microsoft Outlook to communicate ideas, thoughts, and instructions which can be understood by large variable groups (i.e. Operations, Maintenance, QC, Stores, etc.)

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41475
Job Location: Ypsilanti, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/12/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Technician

Description:
Purpose
Perform service and maintenance of aircraft systems, assemblies, sub-assemblies, components, evaluation, troubleshooting, modification, and repair duties on aircraft.

Experience & Skills Required:
* Must possess an Airframe and Powerplant (A&P) License.
- Please include photo copy of license with resume submission
* Must have a minimum of 8 years experience on UH-60 BlackHawk
* Candidate shall be motivated and require very little supervision.
* Must be able to work with as a part of a group of other technicians
* Must be able to read, interpret/understand Technical drawings, Blueprints and Interactive
electronic technical manuals.
* Must be able to use associated measuring equipment, i.e. gauges and calipers.
* Candidate must have the physical ability to work in and on aircraft.
 
Job Number: 40819
Job Location: Huntsville, Al
Duration: 18 months
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Aircraft Painter II

Description:
PDS Tech is seeking an  RS Acft Painter II for an open position in Savannah, GA.


The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. 2. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. 3. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. 4. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. 5. Use the material tracking system to create parts demand, track squawks and to sign-off work. 6. Assist with aircraft movement in hangars. 7. Offer continuous improvement ideas/participate in continuous improvement activities. 

Education and Experience Requirements: High school diploma/GED. Valid Drivers License required. Two (2) years experience in related paint processes. Aircraft industry experience preferred. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary.

Other Requirements: 1. Ability to read, write, speak, and understand the English language. 2. Able to use tools and equipment associated with the aircraft painting process. 3. Ability to read and interpret blueprints and engineering documentation. 4. Able to pass Pulmonary Function Test to obtain respirator certification. 5. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 6. Must be computer literate.

Unique Skills: Aircraft Painting Skills

POC:  Clyde (813) 426-9917 or ccallwood@pdstech.com 


 
Job Number: 1710072520
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/23/2017
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023B6tAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts Clerks - Addison, TX

Description:
STS AeroStaff Services is hiring Aircraft Parts Clerks in Addison, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Keeping and maintaining accurate records of all the inventory and stock in the warehouse
• Source and select suppliers, negotiate pricing for purchase of aviation parts
• Authenticating the goods in the received shipments and maintaining note of any discrepancies
• Coordinating the receiving and dispatch of goods with transporters and suppliers
• Ensuring the proper handling and storage of goods and supplies
• Following all safety regulations and legal documentation norms pertaining to warehousing
• Counting, labeling, and allocation of parts
• Delivering/Picking up parts throughout the DFW area
• Completing all the assigned tasks as delegated by the supervisor
• Perform other related duties and assignments as required

Qualifications:

• High school diploma or a GED equivalent
• Minimum of 2 years’ of experience in a warehousing or retail facility
• Valid Driver license to operate rented/leased or company owned vehicles
• Forklift Certification is preferred
• Working knowledge of Microsoft Office Suite
• Ability to efficiently network and coordinate with transporters and suppliers
• Ability to manage time to meet targets and deadlines
• Needs to have strong written and verbal communication skills

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41415
Job Location: Addison, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Dallas, TX

Description:
STS AeroStaff Services is hiring Aircraft Records Specialists in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Schedule:

Wednesday-Saturday, 6:00am-4:00pm

Job Summary:

Responsible for processing the retention of all Maintenance Records into the imaging system and ensures the documents are maintained permanently in accordance with procedures and FAA regulations.

Job Duties:

• Accomplishes imaging needs and requirements (eg. SIS scanning/indexing/verifying)
• Assists research Teams (such as AD Compliance, Mx Programs, Mx Program Compliance, and Engineering) with locating documents
• Works as liaison to outsourced vendors and facilities regarding package/paperwork reciepts and/or uploading for FTP retrieval
• Performs data entry into databases (eg. engine oil consumption, engine trends, work package lifecycle, overtime info)
• Ensures maintenance packages and paperwork are received into Records and distributed to appropriate personnel
• Responsible for Records mail pick-up and basket distribution duties
• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items. (eg. MCAUDIT)
• Reviews documentation of maintenance accomplished for proper sign-off
• Reports all errors to CASS as appropriate
• Performs the removal and installation of on condition and hard time components
• Assists in monitoring correction requests, Records email box and other problem issues for Tech Ops
• Works on special projects for other Teams when necessary

Qualifications:

• High School Diploma required; Associates or Bachelor’s degree preferred
• Minimum 6 months’ experience in aviation records preferred
• Prior work experience or training performing document imaging preferred
• Must be able to work from seated and standing positions for long periods of time
• Must be able to read review, and accurately apply and categorize technical documents, understand office procedures and follow instructions
• Must be able to operate document imaging equipment and use a computer tools
• Must be able to work under tight time constraints to accomplish daily assignments and projects
• Must be able to utilize Microsoft Office software; specifically Excel and Outlook
• Must be able to accurately and efficiently review and enter data into computerized systems
• Strong desire and ability to work in a technically oriented environment
• Must possess good organizational and communication skills
• Must have the ability to manage interruptions, prioritize responsibilities and work in a fast paced environment
• Must have a positive attitude and be a Team player
• Must maintain the confidentiality of proprietary information handled in daily tasks
• Must be able to work a flexible schedule with day, night and weekend duty and holiday work
• Prior work experience and/or familiarity with aircraft maintenance terms and documentation preferred
• Excellent organization skills and time management
• Must work under tight time constraints to accomplish assignments and projects

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41501
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Houston, TX

Description:
STS AeroStaff Services now offers Aircraft Records Specialist jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Records Specialist is responsible for data entry, audits, and updates of daily production documentation by the maintenance organization.

Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items
• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance
• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system
• Performs the removal and installation of components in the Component Control System module of the maintenance computer system
• Reviews and Updates documentation pertaining to AD's and modification compliance in the Modification Control System module of the maintenance computer system
• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft
• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system
• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports
• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance
• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations
• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations
• Produces Aircraft Records specification reports when requested from outside parties
• Monitor correction requests
• Interact with Planning, Records, Reliability, Production and Engineering departments
• Responsible for verifying the accuracy of maintenance databases through various reports
• Submits recommendations for process improvements and assists Records Analyst in training new Employees

Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred
• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred
• Must be able to master PC software packages including Microsoft Excel/Word/Access applications
• Experience working with an imaging system software is a plus
• Experience working with the Maxi-Merlin main frame application is a plus
• Ability to learn to read technical documents, follow instructions, and understand office procedures
• Must have vision ability sufficient to view and read computer monitor on a frequent basis
• Must be able to lift 30 pounds and drive on secured airport property
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must have a valid driver's license at time of hire and be comfortable driving at night
• Candidate must be able to type 40 WPM, detailed oriented, self-starter, dependable, able to multi task, work in a close environment with a Team and able to work productively with little supervision

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41218
Job Location: Houston, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Tool Procurement Analysts - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aircraft Tool Procurement Analysts in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Analysts provide direct technical support to Line, Base, Engine, and Component Maintenance organizations to ensure the provision of safe, compliant, and cost effective equipment, which is necessary for aircraft reliability and on time performance
• Candidates for this position need to have past technical experience working in aircraft maintenance, machine shop, or ground support equipment as an AMT, Machinist, GMT or Engineer

Qualifications:

• 8-10 years’ of experience
• Airframe and Power-Plant license with 5+ year’s aviation related experience (OR) Avionics Certificate with 5+ years’ of aviation related experience (OR) Bachelor’s or Master’s Degree in Aeronautics or Engineering with 5+ years’ aviation related experience (OR) 7+ years’ of Aircraft Tooling Experience including tool management, procurement, and allocation
• Prior leadership position preferred
• Aircraft Tooling experience preferred
• SAP training preferred
• Ability to read and interpret AAs, SBs, ADs, wiring diagrams, AMMs, CMs, EMs and other technical documents preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40836
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airline Maintenance Planners - Long Island City, NY

Description:
STS AeroStaff Services is currently hiring Airline Maintenance Planners in Long Island City, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Candidates MUST be eligible to work for any employer in the United States, and be local to the area, or willing to permanently relocate!

Job Duties:

• Forecast and coordinate the scheduling of both short term and intermediate maintenance requirements on company aircraft
• Effectively and efficiently route company aircraft ensuring the timely compliance of all short term aircraft maintenance requirements
• Develop and maintain major visit plans and schedules for Heavy Maintenance Visits, Paint Lines, Mod Lines, Project Authorizations, and major component plans
• Works directly with the SOC Duty Manager and Sector Supervisor on duty adhering to all company aircraft routing policies and procedures
• Develop and maintain Visit Packages and Hangar Work Orders for all scheduled maintenance tasks utilizing the company computerized maintenance system
• Monitor aircraft status and hub operations routing/rerouting company aircraft to facilitate any operational irregularities while maintaining the integrity of the maintenance plan and established company performance objectives
• Monitor all MEL and Deferred Maintenance Items coordinating the timely compliance with MOC, Line Maintenance, and Material activities
• Coordinate and communicate all “day of” operational changes affecting the maintenance plan
• Provide constant oversight to company assigned flights advising the Supervisor, Maintenance Planning/Routing of any irregularities/conflicts affecting the maintenance plan
• Provide constant oversight to the short term maintenance plan advising the Supervisor, Maintenance Planning/Routing of any irregularities affecting the maintenance schedule
• Maintain a daily log of all maintenance and operational information including aircraft substitutions, swaps and cancellations
• Perform additional functions (essential or otherwise) as may be assigned from time to time

Qualifications:

• 2+ years’ of Maintenance Planning or Maintenance Control experience with commercial airlines
• Highly prefer Sabre or TRAX experience, but will accept a similar program
• Proficiency with the Microsoft Suite of Office Products, particularly EXCEL
• A&P (Airframe and Powerplant) License highly preferred
• Excellent written and oral communications skills
• Must be able to multitask in a highly aggressive environment
• High level of proficiency working with forms and timelines
• Ability to listen, discern, and resolve issues with a sense of urgency

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 31933
Job Location: Long Island City, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanics (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Requirements:
Looking for resources interested in possible contract to direct.

3-5 years aircraft sheet metal assembly - preferably large structures.

Must have heavy background of sealing, drilling and countersinking. Need at least some experience building the structure of the aircraft - not exclusively MRO experience.
 
Job Number: FD-589944KS
Job Location: Wichita, KS
Rate: $28.00/HR
Per Diem: Possible
Overtime: Yes
Duration: 3 Months
Start Date: 02/26/2018
Input Date: 02/13/2018
Last Updated: 02/26/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Program Manager

Description:
SUMMARY
Supports Program Manager with all aspects of Program Management.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Comprehends contractual obligations and statement of work for assigned program(s) and provides guidance based on these documents to other program team members as required.
• Participates in program planning and documenting.
• Develops and maintains status and visibility tools.
• Assists with oversight and coordination of vendor activities and communication.
• Comprehends and monitors assigned aspects of a program and report status.
• Coordinates or assists with coordinating program reviews and meetings.
• Coordinates program related travel as required.
• Organizes and facilitates communications between the customer and appropriate GTI personnel.
• Provides leadership and coordination of team-based solutions to program issues.
• Develops methods and procedures for managing programs.
• Assists or takes primary role in developing or administering program change orders.
• Assists with part procurement and status as required.
• Assists in maintaining program financial health tools.
• Participates in risk identification and risk mitigation activities.
• Assists with final inspection (closing process) as required.
• Responsible for ensuring that assigned small-scale projects progress on schedule within budget and meets or exceeds minimum quality standards; this may include post delivery support.
• Assists in preparing and maintaining departmental policies, procedures and reporting.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

COMPETENCIES
To perform the job successfully, an individual should demonstrate the following competencies:

CORE COMPETENCIES
• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

JOB CORE COMPETENCIES
• Customer Service – Displays courtesy and sensitivity, manages difficult or emotional customer situations, meets commitments, responds promptly to customer needs, and solicits customer feedback to improve service.
• Planning & Organization – Prioritizes and plans work activities, uses time efficiently, plans for additional resources, integrates changes smoothly, sets goals and objectives, and works in an organized manner.
• Productivity – Meets productivity standards, completes work in timely manner, strives to increase productivity, works quickly and achieves established goals.
• Relationship Building –Builds rapport up, down, and across the organization, establishes collaborative relationships to achieve objectives, seeks win-win solutions to conflict, develops network of professional contacts, and displays empathy and tolerate diverse viewpoints.

SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
Bachelor's degree (B. S.) in Engineering or a related discipline from a four-year college or university and a minimum of four years related experience and/or training, or equivalent combination of education and experience. Aerospace background and aircraft interior industry experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Ability to work well independently and cross-functionally as part of an established and growing team.
• Demonstrates the interest and ability to grow within the program management function.
• Displays sound judgment, problem-solving skills and ability to function independently to accomplish tasks with minimal supervision.
• Strong communication, time-management and problem-solving skills.
• Ability to read, analyze and interpret the most complex documents.
• Ability to respond effectively to the most sensitive inquiries or complaints.
• Ability to write speeches and articles using original or innovative techniques or style.
• Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management, public groups and/or boards of directors.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
• Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases.
• Ability to deal with a variety of abstract and concrete variables.
• Demonstrated experience with Accounting, Database and Project Management software.
• Proficient in Microsoft Office applications with advanced Excel skills.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
 
Job Number: 18-811
Job Location: Northwest
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Crew Support Coordinators - Jamaica, NY

Description:
STS AeroStaff Services is hiring Aviation Crew Support Coordinators in Jamaica, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Inputs and tracks all changes to the work schedule
• Creates and maintain all departments filing system
• Manages all aspects of travel arrangements for business trips
• Monitoring office supply inventory and order as necessary; ensure received supplies are correct and expensed appropriately
• Assists Supervisor in tracking Crew member time and attendance records
• Addresses Crewmember requests and needs in a professional manner, providing follow-up
• Answers phones and assist Crewmembers as necessary
• Processes weekly payroll for all Aircraft Maintenance locations electronically
• Handles all aspects of meeting and event coordination
• Responsible for processing all work related injury reports to the appropriate parties
• Other duties as assigned

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41385
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/05/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Planning Analysts - Goodyear, AZ

Description:
STS AeroStaff Services is hiring Aviation Planning Analysts in Goodyear, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible to ensure that all maintenance work packages are efficiently processed through initiation, planning, execution, control and closure for every aircraft visit with emphasis on quality and accuracy of the finished product. Daily involvement with each assigned project to have the most accurate status of the aircraft. Plan and price customer work packages and programs for labor and materials requirements. Create, update, and monitor production schedules and milestones. Create and update program billing groups as required.

Job Duties:

• Effectively coordinate all aspects of package preparation to ensure all five phases of package development are completed efficiently on-time and accurate
• Estimate customer supplied work packages and programs for individual skills and identify the material and tooling requirements
• Determine cumulative program cost for labor hours by skill
• Create billing group matrix for cost accounting to support customer and billing requirements
• Enter individual work cards into Quantum System with job description, estimated man-hour requirements by skill and any customer card references as necessary
• Produce paperwork with bar codes or attach bar code labels to customer paperwork for labor and material tracking
• Research all technical reference data needed to accomplish work cards and attach to work deck where applicable
• Develop aircraft master phasing chart listing all work cards to be completed by day for each check and above project and provide a master flowchart to support the plan
• Update chart weekly on production floor for completed and rescheduled tasks, additional milestone (major discrepancies), departure date, etc., as input is provided by aircraft maintenance management personnel
• Provide aircraft post-departure analytical report as required to show each projects performance criteria
• Assist management in forecasting all manpower, facility, tooling, and material requirements using customer provided work scopes
• Schedule pre-induction meetings for all Maintenance and other support staff as necessary to provide an overview of each project’s work scope
• Maintain a lessons learned file for each project
• Turn over to production a complete work package which consists of: pre-dock and contract review, work package, manpower requirements, tooling and material requirements and all appropriate technical data attached
• Understand and be able to accomplish the functions of all other members in the Planning office
• Assist management with forecasting all manpower, facility, tooling and material requirements using customer provided work scopes
• Perform other duties and special projects as assigned
• Accountable to the Director of Maintenance in all daily functions

Qualifications:

• High school diploma or equivalent; College degree preferred
• A&P license preferred
• Two (2) years’ aircraft planning/pricing and proficient in A.D. research, familiar with Maintenance Programs and can read and understand Aircraft manuals and drawings
• Four (4) years’ commercial aircraft experience
• Computer use: PC and mainframe, must be computer literate and proficient in Microsoft Excel, Access and Project
• Comprehensive knowledge of aircraft related scheduling and maintenance packages
• Must have excellent communication skills
• Must be a self-starter and ability to work with minimum supervision

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41313
Job Location: Goodyear, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Quality Inspectors - Spokane, WA

Description:
STS AeroStaff Services is now hiring Aviation Quality Inspectors in Spokane, Washington.

We offer a competitive salary, amazing employee benefits and an excellent commission’s package alongside the opportunity to work with some truly incredible people.

Job Summary:

This Role will be tasked to utilize their seasoned skills to be effective, efficient and productive on a daily basis. Quality Inspectors will be expected to work as a cohesive unit to manage all quality control aspects of aircraft maintenance, aircraft painting, material and tooling acquisition, and administration of maintenance and training records, as well as assist in creating an atmosphere of communication, collaboration and teamwork.

Job Duties:

• Continuing Education of CFRs such as Part 145, 121, 65 and Part 43
• Coordination of External Audit Inspections, Reports, Corrective Actions, and Responses
• Coordination of Customer Inspector Training and Certification Requirements
• Organizational Skills to Function Properly in a Fast Paced Industrial Environment
• Qualification Validation and Appointment for Interim Quality Manager to Support Organization During Extended Period Absences
• Ensure that Work Orders are Completed Per Established Inspection Procedures and Sign Air Worthiness Releases
• Ensure that Inspection Items are Compliant and Complete
• Ensure that Parts Tags are Filled Out and Processed Properly with Proper Tag Attached
• Support Records Supervisor with Controlling and Auditing Work Orders
• Perform Receiving, Preliminary, In-Process, Hidden Damage and Final Inspections
• Provide Training (Initial and Recurrent) to Site Employees
• Perform Quality Assurance Audits and Routine Surveillance of In-Process Work
• Manage the Internal Quality Audit Program
• Review Inspection Forms and Paperwork for Proper Completion
• Serve as the Alternate Repair Station Point of Contact for the FAA
• Survey and Approve Potential Materials and Service Vendors

At STS AeroStaff Services, we treat our employees like family. We nurture and guide their careers down the path of success and promise to work with them every step of the way to ensure prolonged professional happiness and complete job satisfaction.

Qualifications:

• High School Diploma or GED (required)
• Bachelor’s Degree in Industrial Engineering, Operational Management, General Business, Etc. (preferred)
• Experience in Lieu of College Education (consideration)
• Minimum of 5 Years’ Experience in the Aviation Quality/Inspection Area with a Large Organization
• Ability to Wear Full Face Respirators, Coveralls and Fall Restraint Equipment
• Ability to Pass a DOT Drug and Alcohol Test
• Ability to Pass a 10 Year Background Check and Obtain TSA Airport Badge
• Ability to Work a Variety of Shifts Based on Company and Client Needs
• Current FAA A&P Certificate (validation verified)
• Current Software Skills such as MS Office Suite, Outlook, SharePoint, etc.
• Experience Designing, Developing, Implementing and Training Program Related Items
• Experience with Lean Production, TQM, and/or Six Sigma Work Environments
• Ability to Communicate Effectively with a Variety of Methods (Verbal, Written, Presentation, Etc.)
• Achieve Compliance Goals: 1. Customer Pick-Up Rate of 15/Aircraft; 2. Customer Satisfaction Rate of 4.5 for Quality Category; 3. Indirect Labor Hours of 110% or Less; 4. Corrective Action Completion Rate of 95% On-Time
• Manage the Administration of Manuals: Repair Station, Quality Control, Repair Station Training, Operations Specifications and the Quality Management System
• Creation of Standardized Reporting of Service Risks, Major Repairs and Unapproved Parts in Accordance with Applicable Regulations
• Evaluation of Inspector and Designated Inspector Qualifications and Authorization to Perform Appropriate Inspection
• Ensure that all Aircraft Maintenance Meets FAA, Customer, Company and/or Manufacturer Specifications

Not only is STS AeroStaff Services widely considered one of the premiere staffing organizations in the country, we’ve also been honored with multiple awards recognizing us as innovators and leaders throughout the recruiting industry.

If you or someone you know is interested in learning more, we encourage you to share this post across your social media channels or simply apply on this page. For questions, please call 1-877-707-5767.
 
Job Number: 41370
Job Location: Spokane, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Technical Writers - Dallas, TX

Description:
Now Hiring Aviation Technical Writers!

Overview:

STS AeroStaff Services is now offering Aviation Technical Writer jobs in Dallas, Texas. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best technical writing jobs in Dallas, Texas; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aviation Technical Writer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

Technical Writers are responsible for managing, revising, and producing aircraft maintenance manuals and documents used for maintaining the fleet; while ensuring safe, consistent, standardized, clear, accurate and compliant work instructions; meeting deadlines and the needs of Production, Engineering, Planning, Maintenance Programs, Reliability, Quality Control and Regulatory personnel.

Essential Duties & Responsibilities:

• Creates, writes, revises, edits and publishes maintenance publications, documents, and work instructions ensuring accuracy to regulatory, and maintenance program requirements, and to technical sources or approved changes
• Processes OEM revisions to Aircraft Maintenance Manuals, Illustrated Parts Catalogs, Fault Isolation manuals, Wiring Diagram manuals, and other publications and documents - reconciling the differences with engineered changes and managing the approvals necessary for publication
• Receives and/or submits, and processes document change requests for Maintenance Publications and documents, and Submits Publication Change Requests to correct errors
• Assists Technical Writers and Technical Publications Specialists in maintaining historical record of revisions, network library, and published documents, and assists with required audits, publishes, distribution, and record-keeping
• Interfaces with various M&E departments for continuous analysis and improvements of the maintenance program, publications, documents and processes including Production AMTs and Inspectors, Fleet Leads, Engineering, Planning, Regulatory, Quality, Central Publications, and any other department necessary
Qualifications:
• High school diploma or equivalent required
• Aviation-related (maintenance or engineering) 4 year degree preferred
• 3 years’ minimum aircraft maintenance experience required
• Transport category Boeing 737 experience is preferred
• 3 years’ minimum technical writing experience required. Aviation-related technical writing preferred
• 1 year minimum experience with Adobe FrameMaker, Arbortext, or other SGML or XML based authoring program required
• Expert in MS Word, Excel, and Access preferred
• Experience with Corel Draw, Iso Draw, or other Illustration editing tools preferred
• Airframe and Powerplant Certificate (A&P) or 5 years’’ equivalent maintenance experience (military or transport category) required
• Must be able to comply with Company attendance standards as described in established guidelines
• Must have excellent writing and editing skills
• Must have excellent organizational skills and the ability to prioritize and complete multiple tasks and projects under tight deadlines
• Must be able to type 50 wpm and have excellent computer skills, with an ability to learn new programs quickly
• Must have excellent research, writing, and verbal communication and presentation skills
• Must be able to read and understand aircraft maintenance manuals, work instructions, policy and regulatory publications
• Must possess excellent attention to detail, problem-solving skills, and ability and desire to deal with technology concepts
• Must be able and willing to travel and represent at industry meetings and conferences
• Must be able to use personal computer and desktop publishing equipment for extended periods of time
• Must be able to access all sections of company aircraft, climb ladders/stands
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986
Company Overview & Benefits:


STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40500
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical System Designer

Description:
Avionic Electrical Systems Designer does integration and implementation. (design, certification and system support). Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Contributes to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. Performs other duties as assigned
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with



Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Avionics Engineers in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• IFE Systems Engineer Responsible for developing new IFE system and architecture including creating requirements definition, acceptance test procedures, system architecture, ICD, and any other required system documents
• Additional responsibilities include interfacing with customers, suppliers and other project stakeholders pertaining to IFE design projects
• Implement the system architecture in conjunction with marketing and product line development for various aircraft platforms
• Serve as the main technical interface for the aircraft platform between the airframer, product line manager and airlines
• Participate in project design review meetings to ensure design meets intended requirements
• Develop system engineering test plans and assure the execution of the plan and reports
• Develop relationships with Airframer and retrofit engineering teams, leading to successful system integration and collaboration
• Collect and document system architecture and cabin system interface requirements into system specifications and block diagrams
• Define system engineering evaluation, functional, and operational testing
• Practice safety-conscious behaviors in all operational processes and procedures
• Position will require both domestic and international travel

Basic Qualifications:

• B.S. in engineering or related scientific field; EE, IE, or CS preferred
• At least three (3) years’ direct engineering work experience, two (2) of which in a system engineering role
• Must possess working knowledge of electronic system design techniques and engineering specifications and drawings
• Must have strong computer skills and demonstrate proficiency with CAD systems and MS Office programs
• Must have excellent verbal and written communication skills
• Must have good interpersonal skills
• Must be detail oriented, self-motivated, critical thinker with project management skills

Preferred Qualifications:

• Knowledge of aircraft interior cabin electrical, avionics and entertainment systems
• Solid understanding of industry standards

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41472
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/09/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering) TS1

Description:
Avionics/Electrical Contractor (Custom Engineering) TS1

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Must be proficient at creating design and compliance data to support after market installations on all Company aircraft models. Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8220
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

CNC Grind OD/ID - MI

Description:
Chipton-Ross is seeking a CNC Grind OD/ID for an opening in Macomb, MI.

RESPONSIBILITIES:
The acceptable candidate shall be required to set up and operate CNC and Manual OD and ID grind equipment with minimal supervision. Grinding of splined shafts and aircraft gears holding tolerances of .0001"-.0005." Maintain proper documentation of SPC data and participate in client's certified operator program. Familiarity with lean manufacturing and continuous improvement techniques beneficial. Overtime generally required. Inspection of work utilizing certified operator program. Able to bend, stoop, stand, kneel, and lift up to 50 lbs. as needed.

REQUIRED EXPERIENCE:
Blueprint reading skills, shop math skills and proficiency in the use of a wide variety of precision measuring tools is required. 3 to 5 years' experience.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 166351
Job Location: Macomb, MI
Rate: $16 to $28.00 DOE
Duration: 6 Months CTH
Input Date: 11/10/2017
Last Updated: 10/22/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmers - Atlanta, GA

Description:
STS AeroStaff Services now offers CNC Programmer jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of production management, the CNC Programmer will generate CAM code programs for a variety of CNC machines, Point drawings, and machine set ups. The programs generated will produce or repair precision aircraft parts using multiple types of CNC equipment, accurate measurement tools and portable coordinate measuring equipment.

Job Duties:

• Plans machining operation by generating CNC G&M code programs/point drawings and machine set-up sheets by studying work orders, engineering orthographic drawings, engineering work instructions, materials, specifications, reference planes, locations of surfaces, and machining parameters interpreting geometric Imperial, SI dimensions base on ANSI and ISO standards and tolerances (GD&T)
• Use CAD/CAM software to program mills and lathes by entering machine code and operation instructions, including zero and reference points, setting tool registers and offsets, compensation, conditional switches, and calculating requirements including basic math (geometry, and trigonometry)
• Sets-up mills, lathes and grinders by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers. Indicating vices, machining fixtures and tramming machine heads.
• Verifies settings and program code by measuring positions, first-run part, and sample work pieces adhering to standards
• Maintains part specifications by observing machining operations
• Verify the feed and speed of machines during the machining process, taking measurements, detecting program code error and malfunctions
• Troubleshooting processes, adjusting and editing programming parameters
• Sharpening and replacing worn tools
• Adhering to quality assurance procedures and processes specifications
• Maintains equipment by completing instructed preventive maintenance requirements, following manufacturer's and instructions
• Troubleshooting malfunctions and reporting to management for equipment repairs
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations
• Effectively work with co-workers, engineering and management in problem solving and exploring and implementing best practices in our operations
• Be prepared to cross train and be utilized in other aspects in the production process

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Proven experience as CNC Programmer and Machinist with formal training setting up and running Mills, Lathes, and Grinders
• Knowledge of CAD/CAM software, CNC G&M Code manual input for machine controls
• Experience in using and/or programming manual, semi-automated or CNC automated tools and machines (lathes, grinders etc.)
• Proficient in reading and interpreting engineering drawings, schematics, engineering orders, and technical manuals
• Able to read and understand Boeing and Airbus process and material specifications
• Knowledge of the properties of metal and other material
• High level of manual dexterity and detail orientation
• Ability to use precision measuring and portable coordinate measuring equipment tools to take accurate measurements
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Proficient in math and analytical abilities (to include but not limited to Algebra, Geometry, Trigonometry)
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language
• Maintains safe operations by adhering to safety procedures and regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41356
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/31/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Specialist/Flammability

Description:
Certification Specialist/Flammability

Location: Savannah, GA
Pay Rate: DOE
Duration: Long Term W2 Contract
Shift: Not specified

Unique Skills:
Certification experience is strongly preferred with additional flammability background as a plus.
Certification experience should include, generating test plans/reports, signing off engineering drawings for certification, SmarTeam (or similar PDM), CATIA (or similar CAD), and familiarity with FAA/EASA Part 25 regulations, FAA policies/procedures.
Flammability experience could be having familiarity with FAA 14 CFR 853 (a) and (c) testing, generating flame test plan/reports, test witnessing, etc.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8333
Job Location: Savannah, GA
Rate: 59.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification/Flammability Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Certification experience is strongly preferred with additional flammability background as a plus.
• Certification experience should include, generating test plans/reports, signing off engineering drawings for certification, SmarTeam (or similar PDM), CATIA (or similar CAD), and familiarity with FAA/EASA Part 25 regulations, FAA policies/procedures.
• Flammability experience could be having familiarity with FAA 14 CFR 853 (a) and (c) testing, generating flame test plan/reports, test witnessing, etc.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-221
Job Location: Savannah, GA
Rate: $59.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/12/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
• Design Engineer/Mechanical Engineering for Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Other preferred skills: Excel, Word and Power Point.

Experience/Education Required:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-236
Job Location: Savannah, GA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Required: Proficiency with composites structural design
and with CATIA V5 with CPD

Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within engineering protocols in the analysis, design and/or repair development of aircraft structures, power plant component parts, mechanical and electrical systems/structures and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
 
Analyzes and interprets engineering proposals and documentation such as drawings, material and product specifications, structural repair manuals (SRMs), component maintenance manuals (CMMs) and illustrated parts lists (IPLs/IPCs) to develop design and/or repair schemes approaches.  Confers with management to clarify or resolve problems.
 
Designs and develops and/or repairs of structural, power plant and other operational and structural components that are used in operating aircraft.  This includes producing or assisting in the production of computer aided drawings and engineering reports.

The Structures Company is an AA/EOE.
 
Job Number: 177
Job Location: OK
Duration: Long Term
Start Date: February 2018
Input Date: 01/30/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Tooling Engineer / CAD Creo or Solidworks CA

Description:
14307

Title Composites Tooling Engineer
45/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a Composite Tooling Engineer in our Airframe and Composite Design group in San Diego, CA.

DUTIES AND RESPONSIBILITIES:
•Provides expertise in tooling design for both large and small composite laminates including primary structure and control surfaces.
•Understands composite tooling theory and the selection of appropriate tooling material for the application and/or production volume required.
•Applies technical knowledge to analyze, investigate and resolve assigned engineering problems encountered on the production floor with regard to damaged tooling.
•Applies engineering principles effectively for design, development and sustaining engineering activities related to aircraft systems integration and installation.
•Documents findings, communicates results to engineering staff, makes technical presentations and may represent the organization as the prime technical contact on small identifiable projects.
•Advises management of work in progress, material availability and potential problems to ensure that personnel, equipment, materials and/or services are provided as needed.
•Person will be responsible for working with personnel throughout the company to help resolve any engineering related tooling issue that may impact the manufacturing delivery schedule.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
•Other duties as assigned.
•Exposure to various composite manufacturing processes and tooling concepts.
•Experience with Pro-E Cad software.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
•Must have an understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area.
•Background with various composite tooling design is preferred.
•Experienced with a CAD program; Creo, Solidworks, etc.
•Ability to present information to internal and external customers.
•Able to work extended hours as required.
•A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14307
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 01/30/2018
Last Updated: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Maintainability Eng III

Description:
Unique Skills:
Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 119581
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Technical Certification Eng TSIII

Description:
Unique Skills:
1. Familiar with certification requirements for FAA 14 CFR, Part 25 regulations Flight into Known Icing (FIKI), Appendix C and EASA reciprocal requirements 2. Experience with addressing FAA Issue Papers and EASA CRI's 3. Ability to design and size wing/inlet cowl anti-ice systems 4. Experience integrating aircraft and engines 5. Ability to model internal flow situations (1D and 3D)

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs. specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:

Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 119006
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Completions

Description:
UNIQUE SKILLS
This is a Design Engineer position in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Engineer will be required to liaison with the shop on engineering issues. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.
 
Job Number: 18-809-123381
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 02/28/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Composites

Description:
Under the direction of project design engineering, serve as a member of a design team providing detail design for engineering CAD models. The main product line will require design-to-build activities for a Military aircraft composed of primary composite and secondary composite and metallic structures. In addition, we will require modeling using Parametric modeling techniques for sustainable design.
 
Minimum Requirements
o    Citizenship: US Citizen, Green Card Holder or Permanent Residence Status
e    Education: A degreed candidate is highly desired
o        10 years of experience in Aerospace
o       6000+ hours experience with CATIA v5 Part Design and Generative Surface Design (GSD)
o       At least 2000 hrs on V5R23 or higher
o       Entirely 3D CAD Design using Model Based Definition (MBD)
o       Able to work on -site Monday-Friday.
o       Experience with ENOVIA\SmarTeam
o    Experience with CATIA Functional Tolerancing and Annotation (FTA) workbench - 300 hours
o        Experience with CATIA Composite Part Design (CPD) a plus
o       SmarTeam experience is preferred
o       Ideal Candidates: Familiar with GD&T for MBD. Lack of or limited MBD workbench with tolerancing may limit contractor's duration on the program.



The Structures Company is an AA/EOE.
 
Job Number: 183
Job Location: VA
Duration: Long Term
Start Date: ASAP
Input Date: 02/08/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dynamic Loads Engineer

Description:
Principal Duties and Responsibilities
• Provide solutions for aircraft flutter and vibration problems
• Analyze aircraft structural dynamic response and load distributions for gust, landing, taxi, and crash landing conditions
• Analyze aircraft for flutter and determine flutter margins.
• Knowledge of aircraft Aeroelasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling desired including static to dynamic model conversion
• Experience with MSC Nastran and Patran or a comparable application
• Experience with ground tests such as ground vibration tests or landing gear drop tests
• Experience with flutter flight testing
• Experience with dynamic analyses such as aircraft crash landing or engine fan blade out is a plus
• Experience with aeroservoelasticity is a plus
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-223
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/19/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Tech Designer 3/4

Description:
Apollo has a variety of immediate needs for some of our biggest clients! We are currently recruiting, on behalf of a client, for a CONTRACT POSITION with a duration of 6 MONTHS. .

Level 4 is $43.50/hr.
Level 3 is $35.25/hr.
Both positions require: Intermediate to Advanced skill level in CATIA V5 & MBD(Model Base Definition). Teamcenter (IPDM) is Preferred.

Program- H-47 Electrical Equipment Design and Installation.

Job description:

Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5.
Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations.
Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards.
Job requires strong technical skill set in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications.
Education / Experience :

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
This position requires the ability to pass a background check and drug screening prior to employment.

In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
 
Job Number: Ph.# 636-438-0314; 40596
Job Location: Ridley Park, PA
Rate: 35.25
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/26/2018
Last Updated: 01/31/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 3
(U.S. Citizenship Required*)
Ridley Park, PA
2018-5283

Responsibilities:
• Develop, maintain, and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Using design tools, prepare documentation and incorporate design changes.
• Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
• Coordinate activities and products with internal partners and external suppliers.
• Design, develop, maintain and release electronic/electrical/mechanical drawings and 3D MBD Model based definition data packages using CATIA V5.
• Develop aircraft helicopter cockpit layouts, design various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations.
• Investigate design precedents to document and maintain configuration control of engineering designs for use by downstream organizations
• Develop aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards.

Qualification:
• Required – Strong technical skillset in CATIA V5 and 3D model-based master definition engineering
• Experience creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications.
• Experience with Teamcenter PDM is preferred.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience: AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Apply Online Here: https://careers-moseleytechnical.icims.com/jobs/5283/ee-technical-designer-3/job?mode=view
 
Job Number: 2018-5283
Job Location: Ridley Park, PA
Rate: BOE
Duration: 6 Months
Input Date: 02/01/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Andrea Moseley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Ridley Park

Description:
EE Technical Designer 3

Location: Ridley Park, PA
Duration: 6 months

Job Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction. Additionally...Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred.

Skill Code:
65L-Wiring Installation Design

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-01344
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/12/18
Input Date: 02/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer -TSII

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
Essential Functions
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 18-813-123182
Job Location: Southeast
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/11/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8548
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/15/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3 (ACTIVE DoD SECRET REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft Experience with an engineering change process and/or configuration control process

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
AutoCAD – (4+ years required)
MS Office Suite – (4+ years required)

Desired:
CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 8325
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 12/11/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Irvine, CA

Description:
STS AeroStaff Services now offers Electrical Engineer jobs in Irvine, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The EE in this position will be responsible for the design, implementation and testing of electrical/electronic systems for new unmanned vehicles. The ideal candidate will participate in requirements and design reviews, translate requirements into electrical designs. The candidate must work well with customers, contractors, and mechanical engineers to effect implementation of system requirements. The EE reports to the Chief Engineering, Program Manager and Technical Director.

Job Duties:

• Perform studies, trades, and analysis as required to support system requirements and their evolution
• Electrical circuit design, experience with modifying existing designs or create new designs
• Proficient in electrical CAD tools for schematic capture and PCB layout
• Knowledge of wire harness design, including selection of connectors, wires and cables
• Work with designer to lay the cable runs into the CAD model of the airframe
• Document systems design, systems analysis, system interface design, and systems integration
• Familiar with embedded board systems design
• Embedded systems and microcontroller implementation and programming
• Knowledge of common data bus standards and implementations
• Interact with customers regarding new capability implementation and integration into an existing network infrastructure
• Interface effectively with users, customers, management, and other engineering personnel
• Proven teamwork and interpersonal skills with the ability to act in a mentor role and be an advocate for positive change
• Possess strong verbal and written communications skills
• Ability to create and follow standard processes and clearly document results
• Knowledge of aircraft electrical systems

Basic Qualifications:

• 5-9 years’ with Bachelors of Science (engineering degree preferred); 3-5 years’ with Masters; 10-13 years’ of experience may be considered in lieu of degree

Preferred Qualifications:

• Familiar with the Microchip PIC family embedded systems
• Altium Schematic and Board Layout
• UAV/Aircraft Integration and Testing
• Accustomed to working with SAE or DoD standards for aircraft electrical systems
• Knowledge of power generation and conversion systems
• Knowledge of airborne communications hardware (standard interfaces and protocols, networking, SATCOM, data links, cellular, etc.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41437
Job Location: Irvine, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/09/2018
Last Updated: 03/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/09/2018
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Unique Skills:
• Avionics System Integration Experience Require, Honeywell Epic System Experience Preferred

Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-215
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Avionics System Integration Experience Required
-Honeywell Epic System Experience Preferred

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8227
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level \'D\' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 01/25/2018
Last Updated: 03/30/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng Contractor

Description:
Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.


Education and Experience Requirements:
No Translation

Languages Required (in addition to English): English
 
Job Number: 124087
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 02/14/2018
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Data Integrity

Description:
UNIQUE SKILLS
This is a Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve reviewing engineering designs of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The Data Integrity Engineer will review design work created using either AutoCAD or CATIA V5 and will ensure design standards are consistent with company standards and accepted design methods. Assignments are executed under the direction of the Structural/Mechanical Engineering Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned. Aircraft completion experience desired. Catia V5 and AutoCAD experience required. SmarTeam experience desired. Strong knowledge of aircraft cabin interior mechanical design including cabinet fabrication, materials and processes is highly desired. Experience as a design engineer creating new data for completions of VIP aircraft is a plus.
 
Job Number: 18-810-122441
Job Location: Northcentral
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Interior Designer

Description:
Engineering Contractor

Location: Savannah, GA
Pay Rate: $54.76/hr - $56/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
-Item Installation Analysis
-Similarity Analysis
-Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
High school diploma or GED
 
Job Number: 8552
Job Location: Savannah, GA
Rate: 54.76 - 56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineer

Description:
1. Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment,
2. Finite element modeling,
3. Understanding of certification requirements to FAR Part 25 and EASA CS.

Job description:

Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 24-190
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
The Flight Control Systems Engineer is responsible for (but not limited to) supporting the following:


• Design and test of Flight Control Systems (FCS) with embedded DO-178 software and DO-254 complex hardware, including Fly-By-Wire Flight Control Systems. Specifically the integrated hardware and software specification, design, implementation, and verification of a flight control system per the DO-178 and DO-254 standards.


• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing in desktop simulation environment and systems integration labs, aircraft flight test, and aircraft/system qualification and certification


Bachelor’s Degree is required.
Major in Computer Engineering, Software Engineering, or Computer Science is preferred.
Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
Master’s Degree in the Engineering disciplines mentioned above is preferred.

Desired Skills

· Embedded DO-178 software
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
C/C++ code
C# test scripts
· IBM Rational DOORS
· Serena Dimensions / PVCS
Git
 
Job Location: TX
Input Date: 02/06/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Design Engineer (Rep: Albert)

Description:
Hydraulics Engineer
Need experienced hydraulics design engineer that is somewhat of a subject matter expert with the ability to design hydraulic components for the aerospace industry.

Roles & Responsibilities:
• Program and design responsibilities, including the accountability for and development of new design configurations, including interfacing with customers,
• interfacing with manufacturing, vendors, qualification test.
• Drive engineering design and development process improvements. Lead design reviews and approve design and analyses.
• Team member in marketing efforts and business development. Interface with customers to understand needs.

Required Skills, Education and Experience:
• BSME, BSAE, w/ 5 or more years’ experience as follows:
• Aerospace hydraulic component design. Primary, secondary, or utility components (Valves)
• Design and development of hydro-mechanical and electro-hydraulic components including actuators and flow-control valves.
• Experience in component design layout and modeling, detail design and drafting per ASME Y14.5, analysis, and qualification test.
• Understanding of manufacturing and assembly methods.
• Working knowledge of aircraft systems and the effects of hydraulic components on system operation and performance.
• Knowledge of industry design practices to predict component reliability, working knowledge of reliability analysis, fault-tree analysis, FMEA, FMECA,
• durability analysis, damage tolerance analysis, and wear analysis.

CALL: Albert 314-791-1565
EMAIL: Albert.Peniche@Yoh.com
 
Job Number: HYDAlbert
Job Location: Lynnwood, WA
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: ASAP
Input Date: 02/02/2018
Last Updated: 02/10/2018
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Design Engineer

Description:
*B.S. degree in mechanical, civil, aerospace or aeronautical engineering typically required, although relevant experience will also be considered

*15+ years of experience in STC design and large scale aircraft modifications

*10+ years of experience with Catia

*Proficiency in SolidWorks, AutoCad and Microsoft Office

*Ability and willingness to travel, both foreign and domestic
 
Job Location: Portland, ORE
Rate: OPEN
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 02/08/2018
Firm Name: AVIATION CONSULTING EXPERTS INC
Attention: Brook
Address: 13901 AVIATOR WAY
City, State: FORT WORTH, TX 76177-4308
Phone: 817/952-9193
Fax Phone: 817/231-0133
Website: www.aviationaces.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Eng III

Description:
Maintainability Eng III
Savannah, GA
Rate: $58-$63

Unique Skills:

Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.


Education and Experience Requirements:

Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:

Responsible for participating in the planning, development, and sustainment of Company Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 8313
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/27/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Duties and Responsibilities:
1. Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes.
2. Manages and supports the implementation of enhancements to procedures, processes and operating tools.
3. Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with all other relevant procedures and communicate awareness of changes.
4. Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements.
5. Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality.
6. Participates in activities to enhance and support HACI Production teamwork, and provide an environment for all team members to participate in CI (Continuous Improvement).
7. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
8. Analyzes a variety of engineering data to help determine requirements to meet objectives.
9. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
10. Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”.

Education, Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
3. 5+ years experience in aerospace industry in aerospace manufacturing.
4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/29/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Engineer 3
(U.S. Citizenship Required*)
Ridley Park, PA
2018-5326

Responsibilities:
• Develop and implement production and tooling methodologies.
• Participate on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines.
• Develop, identify and implement conceptual designs; maintain program architecture for build.
• Leads and implements manufacturing plans.
• Conduct producibility and variation analyses to ensure manufacturing process capability matches requirements.
• Assist providing producibility information for project plans; help document producibility best practices.
• Analyze design/build concepts to evaluate producible design/build definitions.
• Resolve technical problems of significant impact to performance, cost or schedule.
• Coordinate and implement new engineering principles, theories, advanced technologies and concepts.
• Validate and ensure production readiness of solutions to complex problems.
• Implement lean principles and technologies.

Qualification:
• Preferred – Aircraft Modification Manufacturing Engineering experience.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in Mechanical Engineering, Civil Engineering, Aero/Astronautically Engineering, or related; or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5326
Job Location: Ridley Park, PA
Rate: BOE
Duration: 6 Months
Input Date: 02/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Manufacturing Engineer 3

Location: Ridley Park, PA
Duration: 6 months

Job Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements.
Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.
Additionally, Preferred skill is Aircraft Modification Manufacturing Engineering experience.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. ABET is the preferred, although not required, accreditation standard.

Education requirements:
For client, IF within an Engineer client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or relayed discipline.

Skill Code: 66R-Assembly
 
Job Number: 18-01747
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/16/18
Input Date: 02/01/2018
Last Updated: 02/06/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Technical Training Instructor

Description:
Master Technical Training Instructor

Long Beach, CA
Long Term Contract
Pay Rate: DOE

Unique Skills:

- Aircraft manufacturing and Repair Station knowledge and or experience preferred.


Education and Experience Requirements:

Bachelors degree preferred or equivalent combination of education and experience. Five to eight years experience in aviation industry, including relative company experience. Three to five years experience in training related area. See Other Requirements in Job Description.

Position Purpose:

Under minimum supervision, research, assist in the development, organize and deliver training curriculum. Act as an internal consultant on training issues in areas of expertise. Support training as assigned at all company and FlightSafety facilities. Support Lead Training Instructors and mentor other training instructors as required.

Principal Duties and Responsibilities:

Essential Functions:
1.Conduct classroom and practical training as requested at all company and FlightSafety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers. 2.Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs. 3.Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld. 4.Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT). 5.Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards. 6.As assigned, maintain technical expertise on existing company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc. 7.As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements. 8.Schedule Aircraft Equipment resources as required for Practical Training. 9.Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions. 10.Develop and maintain Computer Based Training. 11.Solicit, promote, and exhibit a spirit of teamwork between company and FlightSafety.

Additional Functions:
1.Mentor Training Instructors as required and provide assistance in the development of their skills and abilities. 2.Promote and ensure a safe training environment. 3.Update training programs/records accordingly. 4.Travel as necessary to conduct training. 5.Performing other duties as required and/or assigned.

Other Requirements:
1.A&P, FCC, or Pilot License preferred. 2.Instructor development training is required. 3.If the instructor will be a member of the company/FlightSafety Total Technical Training program, an FSI Master Technician Certification required. 4.Expert user of PowerPoint, MSWord, and Lotus Notes. 5.Ability to utilize media equipment. 6.Ability to read/interpret blueprints and wiring diagrams. 7.Ability to solve the problems between peers and subordinates. 8.Must exhibit excellent verbal, written, and teaching skills.

Languages Required (in addition to English): None
 
Job Number: 8506
Job Location: Long Beach, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Master Technical Training Instructor

Description:
PDS Tech is seeking a Master Technical Training Instructor


Under minimum supervision, research, assist in the development, organize and deliver training curriculum. Act as an internal consultant on training issues in areas of expertise. Support training as assigned at all Company and FlightSafety facilities. Support Lead Training Instructors and mentor other training instructors as required. 

Principal Duties and Responsibilities:

Essential Functions:
  1. Conduct classroom and practical training as requested at all Company and FlightSafety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
  2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
  3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
  4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
  5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
  6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
  7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
  8. Schedule Aircraft Equipment resources as required for Practical Training.
  9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
  10. Develop and maintain Computer Based Training.
  11. Solicit, promote, and exhibit a spirit of teamwork between Company and FlightSafety. 


Additional Functions:
  1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
  2. Promote and ensure a safe training environment.
  3. Update training programs/records accordingly.
  4. Travel as necessary to conduct training.
  5. Performing other duties as required and/or assigned. 


Other Requirements:
  1. A&P, FCC, or Pilot License preferred.
  2. Instructor development training is required.
  3. If the instructor will be a member of the Company/FlightSafety Total Technical Training program, an FSI Master Technician Certification required.
  4. Expert user of PowerPoint, MSWord, and Lotus Notes.
  5. Ability to utilize media equipment.
  6. Ability to read/interpret blueprints and wiring diagrams.
  7. Ability to solve the problems between peers and subordinates.
  8. Must exhibit excellent verbal, written, and teaching skills.

Education and Experience Requirements:



Bachelors degree preferred or equivalent combination of education and experience.
Five to eight years experience in aviation industry, including relative Company experience.
Three to five years experience in training related area. 

Unique Skills:



Company Aircraft knowledge preferred. - Aircraft manufacturing and Repair Station knowledge and or experience preferred.


 
Job Number: 1710076327
Job Location: Savannah, GA
Duration: 12 months
Input Date: 10/24/2017
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023NCMAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Calibration technician

Description:
Calibration of aircraft instrumentation and associated avionics equipment
 
Job Number: 2018-2
Job Location: Bethpage, NY
Rate: 60
Per Diem: yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/01/2018
Firm Name: TASC TECHNICAL SERVICES
Attention: Mark
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Duration: 9 month contract position
Shift: 1st Shift

******MUST have an Active Secret Clearance or to have had one within the last 2 years******

Job Description:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- 4+ years of experience with Catia V5 3D parametric modeling and drafting
- 4+ years of experience with Structural component and assembly design
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives

Desired:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software

.
 
Job Number: 8433
Job Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/23/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineers - Lexington, KY

Description:
STS AeroStaff Services is hiring Mechanical Design Engineers in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• This job involves designing modifications for post-production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications
• This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards

Basic Qualifications:

• Must have active clearance
• Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
• Experience with Catia V5 3D parametric modeling and drafting
• Perform detailed drawing checks and be responsible for completion of production ready drawings
• Ability to work under little or no direct supervision
• Demonstrated previous success working in a team based environment to meet objectives

Preferred Qualifications:

• Any familiarity with structure of C130 aircraft, specifically C130J
• Air Force customer experience
• Experience or familiarity with engineering change documentation
• Experience with Teamcenter PLM software
• Active DoD secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41479
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/12/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer with active Secret Clearance / Catia V5 CA

Description:
160781
Requirement#AERO-REQ-0722
Work LocationPalmdale, CA (1011 Lockheed Way, Palmdale CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security ClearanceSecret (Prime Contract:re-investigation within the past 5 years (P-29 ), Can start w/o clearance:No, Interim Clearance Sufficient:No)


TitleMechanical Engineer-N
Description
This position is for a mechanism and landing gear design engineer. A successful candidate will have a complete understanding of the principles and techniques of aircraft mechanisms, landing gear and structural design. The candidate will coordinate efforts across a wide range of functional organizations, such as Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing. Responsibilities for this position include: • Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work. • Create system requirements, trade studies, sub-component and flight test plans. • Coordinate with suppliers, internal and external integrated product teams. • Provide manufacturing, component test and ground/flight test support. • May function in a project leadership role managing the system performance, budget and schedule. Must be a US Citizen. This position is located at a facility that requires special access.
Skill/Experience/Education
Mandatory:

• Must have a secret clearance with an investigation within the last 5 years to start. • Proficient with CATIA V5. • Experience in mechanism design • Experience in structural design
Desired:

• Bachelor’s Degree in an Engineering Discipline with 5 years of experience or Master's Degree in an Engineering Discipline with 3 years of experience Experience with GD&T (Geometric Dimensioning and Tolerancing)
• Experience with hand stress analysis
• Excellent writing and communication skills

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 Proficient
4-5 Years Yes
Structural Design Proficient with aircraft structural design of composite and metallic part
4-5 Years Yes


Interview RequiredYes

OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:Yes)
TravelNo
Non-Exempt
Rate TypePer Hour

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0722
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 03/21/2018
Last Updated: 03/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineers - Irvine, CA

Description:
Now Hiring Mechanical Engineers!

Overview:

STS AeroStaff Services is now offering Mechanical Engineer jobs in Irvine, California. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Irvine, California; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Mechanical Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

The candidate will work in a rapid development environment where the project will progress from design, fabrication, assembly, and test phases in a short period of time. The successful candidate will be a highly organized self-starter who has direct, hands-on experience developing vehicle and product systems. The candidate must have strong prototyping experience and be comfortable working in a fast-paced environment. He/she must have a keen understanding of what it takes to build subsystems in this type of environment.

Qualifications:

• Must have a U.S. Citizenship
• Demonstrated success in the development of vehicles in an “advanced programs” and/or rapid development environment
• Expert user of CAD tools like SolidWorks, CATIA V5; able to create and modify models, complex assemblies, and drawings
• General knowledge of structure, materials strengths and properties, design criteria, loading conditions, and processes (e.g. non-destructive testing, corrosion prevention)
• Ability to read, understand and interpret engineering technical information (e.g., drawings, handbooks, industry standards and specifications)
• General knowledge of engineering analysis (e.g. mechanical, electrical, avionics, design, circuit, systems, stress, structural, durability)
• B.S. in Aerospace, Mechanical, or Systems Engineering (or closely related discipline) with greater than 5 years’ of applicable experience
• Hands-on build experience with rapid-response prototype vehicles; aircraft, automotive or unmanned vehicles
• Experience designing parts using composite materials and hands-on composite material processing

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 41434
Job Location: Irvine, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Engineer Specialist

Description:
NDT Engineer Specialist

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

NDT skills along with part 145 product support manual specialization.


Education and Experience Requirements:

Bachelors degree in engineering or technical curriculum; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years prior aerospace experience (Commercial, DOD Department of Defense) in NDT and quality systems (working with composites and metals in manufacturing, repair and inspection of aircraft, space systems, motorsports, marine or armament).

Position Purpose:

Leads successful completion of major NDT/engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services including advanced composites and metals processes specifically with regard to production testing criteria, equipment, methodology and specification development for production acceptance testing.

Principal Duties and Responsibilities:

Essential Functions:
1. Establish standards for and/or develop NDT procedures to ensure robust process control including the Gulfstream Shop Practice Manual or Service Manuals as assigned. 2. Lead root cause and corrective action of NDT related MRB to eliminate repetitive rework and continuously improve existing techniques balancing technical product, cost, and schedule. 3. Team leadership of cross-functional product teams (PDT). 4. Identify appropriate methods/techniques for NDT inspection of pre-cured/co-cured or manufactured composite and metals components/articles. 5. Measure and document the capabilities of production inspection methods relative to flaw size and type to support development of robust design incorporating NDT inspection capabilities. 6. Interpret Engineering drawings/requirements and develop recommendations for management and engineering staff to determine quality standards for nondestructive testing. 7. Develop and assess NDT evaluation technologies in support of new and existing programs and improve manufacturing process inspection using NDT methods. 8. Maintain current knowledge of developments in the field of composites and/or related manufacturing technologies in order to recommend innovations to improve quality and effectiveness of company products, equipment and services. 9. Provide certification and training services for Gulfstream as assigned.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. 2. Performs other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline. 3. ASNT SNT-TC-1A - Level III (Qualified/Certified) preferred in all five principal Gulfstream NDT methods (Minimum 2 of 3 primary methods (ET, RT, and UT required). 4. Capable of operating data analysis and computer software for NDT testing.

Languages Required (in addition to English): None
 
Job Number: 8597
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2018
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst II

Description:
PLM Configuration Analyst II

Location: Savannah, GA
Pay Rate: $40/hr - $50/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required.
-Strong customer relationship management skills.
Experience Requirements:
Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design

Essential Job Functions:
PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:
Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience. 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.). 1 year Database experience, data migration/conversion or related experience preferred..

Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Principle Duties and Responsibilities/Essential Functions:
1. Execute plans, according to schedules, for engineering assignments. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Coordinate activities for lower level engineering staff assigned to specific projects. 4. Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements. 5. Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs. 6. Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action. 7. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 8. Develop system queries and utilities to support users information researches 9. Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems. 10. Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA. 11. Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting. 12. Ensure proper security, archiving and audibility of product releases. 13. Analyze, monitor and report business and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 8495
Job Location: Savannah, GA
Rate: 40-50
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/15/2018
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

PS Distribution & Logistics Spec II

Description:
PDS Tech is seeking an PS Distribution & Logistics Spec II for an open position in Savannah, GA. 

Develop and use a solid understanding of all regulatory and quality practices to perform the inspection, storing and shipment of material, to support AOG requirements and distribution needs in all markets. Under moderate supervision, play role to ensure that material is replenished in a timely manner and all documentation and export requirements are fully adhered to. Demonstrate an ability to operate in a high-paced, productive environment to support all internal customer requirements in a timely, professional manner.

Principle Duties and Responsibilities:

Essential Functions:
1. Monitor and assist in resolving AOG situations in a timely manner. Ensure conformance to AOG response policy to include effective and timely communication and execution. 2. Process pick tickets/ orders by pulling and issuing parts to support service center, spare parts sales, back shops, ASC and distribution allocation. Ensure all applicable regulatory documentation accompanies parts and ensure exportation to aircraft tail number compliance. 3. Prepare parts for shipment to customers, vendors, supplier facilities and distribution allocation in accordance with FAA regulations. 4. Demonstrate a solid understanding of inventory management systems (such as Corridor or SAP) to process all transactions associated to material handling and distribution. 5. Handle and transport Dangerous Goods in accordance with DOT, FAA and any other applicable standards. 6. Resolve any distribution discrepancies and elevate to appropriate party as needed with clear communication on steps taken and needed. 7. Maintain a clean and orderly work environment and assist in facility management and general housekeeping. 8. Demonstrate brand protection awareness by adhering to Material Handling Standards. 9. Demonstrate understanding of special inventory processes and programs to include Special Missions and others. Perform other duties as assigned.

Education and Experience Requirements: High School Diploma or GED required. College coursework desired. 1 year experience in distribution, warehousing, material handling, shipping, or receiving. Valid Driver’s License required. 

Other Requirements: 1. Ability to obtain certification to operate forklift and other material handling equipment. 2. Must possess and maintain a valid driver’s license. Ability to pass DOT medical exam. 3. Solid working knowledge of computerized inventory procedures to include experience in material services, inventory control or production control. 4. Competent user of computerized inventory management system. Corridor/SAP experience preferred. 5. Solid working knowledge of Microsoft Office Suite. 6. Good written and verbal communication skills. 7. Must be able to lift 50 pounds. 8. Ability to operate standard office equipment, personal computer, telephone, fax & copier. 9. Must be able to work all shifts and weekends. Shifts are subject to change at short notice.

Unique Skills: These positions are for all shifts except first shift. Candidate must be flexible and able to work any shift, any time. Shifts change often and are subject to change at short notice.


 
Job Number: 1710073984
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/22/2017
Last Updated: 10/22/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023HduAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Minimum of 2 years as active PP DER or PP EAR
• FAR Certification and DER experience
• Function Codes: 8010E, 8050E, 8070E, 8110E
• Per DER Directory authorization on Chart B : A1, A2, A4, A6, A7, A9, A10, A14, A15, A19 and A20
• Per DER Directory authorization on Chart B : E1, E2, E4, E6, E7, E9, E10, E14, E15, E19 and E20

The ideal candidate will have exposure to some or all of the following Authorized Functions:
• Engine and APU installations
• Fuel and Oil (APU and Engine)
• Thrust Reversers
• Ice Protection (APU and Engine)
• Cooling (APU and Engine)
• Indicating systems (APU and Engine)
• Emissions
• Vibration
• Service Documents (APU and Engine)


Additional Authorized Functions must include:
• CS Authority (APU and Engine)
• Equipment Qualification Tests (APU and Engine)
• Aircraft / Bench Integration Test - Flight (APU and Engine)

Ability to sign the following FAA forms:
• Statement of compliance with Airworthiness standards - form 8100-9
• Type Inspection Authorization (TIA) - form 8110-1
• Request For Conformity (RFC) form 8120-10

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
 
Job Number: 24-227
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/03/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Assurance Engineer

Description:
Product Assurance Specialist

Position Purpose:
Collaborates with engineering, operations and procurement in a team environment on development programs and assists in ensuring aspects of the designs, test articles and supplied/manufactured articles are capable of being produced in accordance with approved quality system requirements and certified as compliant to aircraft type design requirements.

Unique Skills:
• Seeking engineering-based position within the quality organization related to design model checking & verification.

Essential Functions
• Contributes to incorporating design quality assurance on development programs and participates in new product design and development, design validation/verification, risk management, planning, flight test and design change activities.
• Partner with design engineers and assist in resolving quality issues and executing design, development, and design transfer initiatives which may include design/process quality capability analysis, supplier selection, requirements incorporation validation.
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
• May partner with Manufacturing Engineers to develop/validate manufacturing processes and provide technical quality support for process planning.
• Assists in use of risk management tools (i.e. FMEA) as appropriate.
• Acts as liaison with representatives outside of the assigned group/area.
• Good understanding of and experience with key design characteristics definition, FMEA, statistics theory and application (SPC) preferred.
• Competencies include: Design control, project management skills, strong interpersonal skills, excellent computer skills, risk management, and strong results orientation.
• Familiar with Geometric Dimensioning & Tolerance (GD&T)
• Knowledge of state-of-the-art quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts preferred.
• Ability to read, analyze and interpret technical documents, Engineering drawings and 3D models.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Capable of working closely with RD&E, Manufacturing and Operations regarding active product quality planning (APQP) through the use of quality control plans and product & process FMEA tools.

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Advanced degree in engineering or related curriculum preferred.
• 5 years in a specific technical discipline or 8 years broad eng experience in several technical disciplines.
 
Job Number: 24-209
Job Location: Savannah, GA
Rate: $50-$60
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/17/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Stress Engineer

Description:
UNIQUE SKILLS
• Minimum of 10 years of experience in stress analysis on primary aircraft structures.
• Must have some experience conducting fatigue analysis on aircraft structure.
• Must have FEM and CATIA V5 experience.
• Experience developing and substantiating aircraft structural repairs is a plus.
• Experience in structural repair development and analysis.

PRINCIPLE DUTIES AND RESPONSIBILITIES

• Selects appropriate methods, techniques and evaluation criteria to resolve complex engineering issues
• Consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

EXPERIENCE/EDUCATION
• Bachelors Degree in engineering; AE, CE, ME with a minimum of 10 years analysis experience on primary airframe structure.
 
Job Number: 24-212
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 04/11/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - Aircraft Seats

Description:
The project engineer must have experience with aircraft seat products. Will be responsible for the delivery of the engineering group work product and, shall be the engineering contact focal for all project communication from internal and external customers and deliverables, after contract award. The project engineer shall be responsible for preparing, scheduling, leading and working with the engineering team to achieve the technical and program requirements successfully. The project engineer shall also be responsible to assure complete integration and maintain business relationships between the engineering team and all other internal customers, assuring the engineering work product meets all company goals.

Essential Duties and Responsibilities include the following. Other duties may be assigned.
Engineering Focal for internal and external customers for technical matters
Establish Tier 2 schedule based on Tier 1 schedule provided/updated by Program Manager and distribute it to all team member once updated.
Responsible to review and integrate all engineering teams Tier 3 schedules to support Tier 2 schedule.
Maintain up to date engineering work scope.
Responsible for complete seat engineering packages in accordance with established design standards and meeting the requirements of the program work scope, schedule and budget.
To identify or initiate any out of scope work to the respective Functional Managers and the Program Manager
Responsible to assess and prepare all CIP to identify any changes to work statement or scope of work, as well as coordinate CIP approvals with the PM.
Lead respective engineering teams in developing solutions and completing each engineering designs based on defined requirements using approved processes and tools
Lead of its respective group to assure proper integration/coordination to engineering designs between different functional engineering groups (EE/ME/Cert/Stress/Flam/Tech Pub/ Test Engineer/MFG Engineer) and the engineering aspect for stakeholders
Identify all technical risks leading to schedule or cost impact to Program Manager and work around the risk in a timely manner if necessary.
Identify potential work stoppages according to discipline (EE/ME/Cert/Stress/Flam/Tech Pub/ Test Engineer/MFG Engineer) and escalate when not resolvable at project focal level
Forecast project workload and assign appropriate resources.
Participate / Conduct meeting / Preparation for ITCM, PDR & CDR or any technical meeting with customer
To lead the respective technical engineering groups (EE/ME/Cert/Stress/Flam/Test Engineer) deliverables and schedule. Functional Managers to be answerable to project deliverables and schedule, while holding functional managers accountable to project schedule, budget and deliverables.
Responsible for the substantiation documents in support of project design implementation as well as supporting the DSC to upload this data to Airbus, Boeing and/or airline customer as defined in the integrated schedule.
Understands and implements regulatory certification requirements into the design packages
Responsible to fill up / update of all EAMR / CFE / BFE listing. PE to approve the EAMR / CFE / BFE listing
Troubleshoots all engineering problems and finding solutions in completing project technical difficulties
Managing of engineering hour’s consumption or allocation of hours to project technical will be responsible by respective Functional Managers.
Functional Managers to provide required resources in support of project with input from Project Leader (PM/PE/Lead).
Identify item of parts with long lead time and/or find alternate parts as replacement and for filling up / updating of EAMR.
Developing and managing the project engineering drawing trees in collaboration with the lead engineers and engineering supervisors.
Oversee Engineering and Certification testing and direct Cert to arrange the test facility as well as coordinate getting the part to the test facility
Responsible to provide project status reports and metrics in conjunction with agreed and published cadence to engineering and/or executive management.
Other duties as assigned.

Supervisory Responsibilities
This job has no supervisory responsibilities.

Requirements
Education and/or Experience/Knowledge
BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field and at least 5 years or more of experience or equivalent working experience. Must have experience with aircraft seat products.
-Strong communication skills.
-Ability to manage multiple tasks.
-Team-player.
-Strong verbal, written and interpersonal communication skills utilizing sound judgment and a 'can do' attitude.
-Proficient knowledge of Microsoft Office products.

Travel within the U.S. and abroad is required to support programs.

The Structures Company is an AA/EOE.
 
Job Number: 185
Job Location: WA
Duration: 9+ Month
Start Date: ASAP
Input Date: 02/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management Support 3 with Ability to obtain (Secret) CA

Description:
1633
Project Management Support 3 (Job Number: 18002754)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Apr 23, 2018

Target End Date: Dec 21, 2018
Requested Hourly Rate: 50.00

Pay Rate: $50/hr

Location: Redondo Beach, Ca

Work Schedule: 9/80

Clearance: Ability to obtain (Secret)

Duration of Assignment: 8 months or longer

Description:

Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Must possess excellent interpersonal, written and oral communication skills. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex logistical and programmatic problems involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

•Solid background and understanding of Project Management fundamentals
•Proficient in applying Cost Account Management/Earned Value principles
•Adept in developing products in MS Word, Excel, Project and Power Point
•Exceptional verbal, written, presentation, and leadership skills
•Bachelor degree from an accredited college
•Ability to obtain a Secret clearance
•US Citizenship


Preferred Qualifications:

•Cost Account Management / Professional Logistics Accreditation(s)
•MS Access proficiency (creating queries, forms, reports and code/VBA)
•Six Sigma Certification / Facilitation experience
•Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
•Familiarity with the F-35 program/platform a plus
•Current Active Secret Clearance
 
Job Number: MB-18002754
Job Location: Redondo Beach, CA
Rate: 50/hr max
Duration: 8 month contract
Input Date: 03/05/2018
Last Updated: 03/05/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Associates - Pinellas Park, FL

Description:
STS AeroStaff Services is currently hiring Quality Associates for open positions in Pinellas Park, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Performs all types of inspections and monitoring to support all phases of assembly and manufacturing, including purchased material, customer-supplied materials and parts
• Able to demonstrate knowledge of how to use basic measuring equipment and instruments to continuity check various assemblies/details parts including basic personal computing literacy
• Able to communicate effectively with co-workers and supervisory staff
• Able to perform and understand First Article Inspection (FIA) per AS9102

Qualifications:

• High School Diploma and/or equivalent in related quality field is required
• Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data
• Candidate should have a thorough knowledge of blueprint readings/interpretation, math as well as a complete understanding of engineering drawing and specifications
• Candidate will understand basic workmanship acceptance criteria used on the production floor
• Candidate should have the familiarity of all paperwork/documentation associated with the aforementioned inspection functions and be able to properly document in a neat and legible manner, all types of errors or discrepancies found
• Must have a thorough knowledge of the correct procedures to follow and precautions to take when performing their work in order to prevent damage to equipment and/or material and injury to self and/or others
• Performs other duties as assigned by supervisor and/or manager as directed
• Working knowledge if Manufacturing and Quality processes is required
• Aircraft manufacturing environment is required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39018
Job Location: Pinellas Park, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 02/07/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com