Job Search Results

732 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:40AM Pacific Time by ContractJobHunter. )

Listings 1 - 732

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist

Description:
Aerodynamicist with Performance and Handling Qualities (P&HQ)
- Aerospace experience mandatory
Location: Mojave, CA
Duration: Contract 12-24 months
Hourly Rate: up to $85/hr
Overtime Potential
Per Diem if you qualify
Holiday, annual bonus, sick pay, 401k
8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controllability; Performance experience is a plus but majority should come from S&C and flight dynamics.
Transonic vehicle experience required; Supersonic vehicle experience a plus
Experience in reversible flight controls
Experience with SIDPAC toolset a plus
Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Main Purpose of the Role is seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule
Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
The Structures Company is an AA/EOE.
Job Type: Contract
 
Job Location: Mojave, CA
Rate: up to 85/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Powerplant / APU

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


Varying Responsibilities:
Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
Evaluate certification methods of compliance.
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Participate in ground and flight tests as required.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Occasional international travel may be required.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Relevant work experience related to aircraft design, test, and certification.
Experience related to APU and/or powerplant systems and integration with the aircraft.
Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
Consulting and direct hire opportunities available.
 
Job Number: #205-APU
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Program Manager

Description:
Currently seeking full-time and contract Program Managers to fill openings with an aerospace flight test, engineering and certification organization located in Moses, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs.
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a
The Program Managers responsibility consists of supporting management of programs through the program lifecycle to achieve or surpass the capability, schedule, and financial performance of customer programs. This position acts as primary customer contact for a programs status, deliverables and cross-disciplinary technical leadership, across a multitude of external contacts and internal team members to ensure customer requirements and expectations are met. Program Managers may also be responsible for overseeing the similarity review process to ensure aircraft components meet certification requirements.

Duties & Responsibilities
• Communicate with potential client to determine scope of project for desired services, timeline and cost sensitivity.
• Conduct internal reviews to determine program staffing to ensure technical skills are paired with technical needs at the appropriate time.
• Create business proposals including schedule, deliverables, and cost.
• Provide business proposals to potential clients and negotiate terms.
• Partnering with Contracts, finalize business proposals including ensuring contract conditions minimize company risk.
• Develop control systems that accurately measure progress of schedule, risk, and technical performance and with sufficient time for corrective action should issues arise.
• Manage program budget, identify and mitigate potential over-runs before they are realized.
• Manage relationship with client throughout project
• Review component qualifications through similarity comparison to ensure they meet certification requirements.
Requirements
• Four (4) year degree in Engineering or equivalent Technical Program Management experience
• 5 + years of relevant experience
• Working knowledge of Part 25 Requirements and Aircraft Certification process desired.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structures Engineer

Description:
We are seeking full-time Aerospace Engineers with Structures experience to join our Flight Test Facilities in Moses Lake with the ability to work rotations in our Seattle offices. If you have 4+ years of experience in Structures, we would like to speak with you.
Job Duties
• Create and review Certification Plans.
• Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
• Review qualification by similarity and/or analysis reports.
• Review system safety documents.
• Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
• Perform Component Drawing Reviews.
• Complete aircraft assembly and installation drawing reviews.
• Participate in Systems Design Reviews.
• Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
• Support Test planning and preparation activities
• Support Pre and Post Flight Briefing.
• Monitor live flight data, typically via telemetry
• Process and Analyze Post Flight data.
• Appropriate the disposition of non-conformances, quality escapes, etc.
• Document flight test design problems for long term fixes.
• Conduct Tlight Test Report Writing.

Requirements
• Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
• 4+ years of aerospace experience.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
• A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent AeroTEC professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities for the company.
• Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace stress Analysis Engineer(Direct hire)

Description:
Role: Stress Analysis Engineer (aerospace)

Location: Mojave, CA

Required:
• Strong understanding of aircraft performance, systems, and operational requirements
• Experience in aircraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Strong problem solving, organizational, and communication skills
• A strong knowledge of aerospace technologies and products
• Bachelor of Science in a relevant engineering discipline from an accredited institution or substantial equivalent experience
• Proficiency in 3D CAD
• Ability to work in multiple engineering disciplines on an aggressive schedule
• A minimum of three years of directly related aircraft work experience in the analysis of structural systems using classical and finite element based methods
• Proof of U.S. Citizenship and ability to obtain DOD clearance

Desired:
• FEMAP and Matlab proficiency
• Proficiency in Catia V5 or SolidWorks
• Hands-on composites fabrication and assembly experience
• Rapid prototyping experience
• Aircraft homebuilding experience
• Pilot’s License
• DOD Secret Clearance
• Additional degrees or additional relevant work experience
 
Job Number: 52131
Job Location: Mojave, CA
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Denver, CO

Description:
STS AeroStaff Services is currently hiring Aircraft Data Entry Operators for open positions in Denver, Colorado.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Data Entry Operators will oversee all aspects of Records retention, maintaining accurate records for each aircraft and components. Audit online records and approved maintenance record database daily, ensuring all maintenance entries are accounted for and accurate. Organizes and reviews all aircraft data relating to the TCI, aircraft flight times, aircraft log pages, and maintenance activities that have been performed on the aircraft to ensure proper airworthiness in accordance with CFRs.

Job Duties:

• Ensure the accuracy and completeness of all records; update databases for lease return and induction activities; Scan or upload all documentation to the ERRP.
• Read & interpret technical data, to be input in the maintenance database, as required.
• Ensure all maintenance records received into Aircraft Records are entered into approved maintenance record database daily.
• Scan, Audit, and index all documents into the ERRP to comply with the FARs.
• Audit the documentation for accuracy and completion as outlined in the GMM & FARs.
• Accurately track all serialized components on the aircraft.
• Record hours/cycles daily; correct aircraft hours and cycles on parts tags, EOs, ADs, FCDs, and A-Checks for accurate data input into the Maintenance database.
• Enter component removal and replacement in the maintenance database; ensure that part numbers and serial numbers are accurate.
• Perform other duties as required or directed from supervisor of the department.

Qualifications:

• High school diploma or GED & the ability to interpret technical data.
• Four years of aircraft related work & familiarity with Aviation terminology.
• Effective oral and written communication skills.
• Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
• Preferred - Experience with aircraft MRO systems & Experience with electronic records management systems.
• Preferred - Previous aircraft records experience.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 35489
Job Location: Denver, CO
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
Aircraft Door Design Engineer
Location: Southeast
Duration: Long term contract: 12+ months
Rate: Open, DOE

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential


General Summary:
 
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components.  The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
 
Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA Version 5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
                                                   
                            
Qualifications
 
Education, Work Experience, Certification and/or Licensure: 
 
BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience
Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP
 
 
The Structures Company LLC is an AA/EOE.
 
Job Location: southeast, NC
Rate: "open"
Per Diem: yes
Duration: 12+ month
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Engineer

Description:
Bachelors Degree in Engineering and experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development
Review all openings posted at www.hi-tecsolutions.com/jobs
 
Job Number: 112881
Job Location: Savannah, GA
Rate: 70-77 hourly
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanical Systems Design Engineers

Description:
Aircraft Mechanical Systems Design Engineers Needed.

Mechanical Systems Design/Integration (Catia Routing)

PRIMARY RESPONSIBILITIES INCLUDE:
Execute conceptual and preliminary airplane design in a thorough, imaginative, and practical manner, including:

Sizing and layout of airplane configuration, including aerodynamic, control, structure, propulsion, and supporting systems
Assessment of vehicle performance
Estimation of structural loads using computational and analytic technique
Perform design optimization of the primary system elements within given constraints.
Employ analytical, empirical, computational, and experimental techniques to assess subsonic and transonic aerodynamic characteristics of aircraft
Articulate formal design reviews and present design data to internal and external customers.
Requires a BS in Aerospace Engineering or Related Field with 10+ Years
SKILLS REQUIRED:
Candidates will have strong knowledge and practical experience in aircraft design, basic sizing, configuration layout, trade studies,
Experience in aircraft dynamics, and controls;
Experience in structural layout & design of primary load paths
Experience with civil transport airplane systems
Working knowledge of civil airworthiness requirements for transport category airplanes
Knowledge of FAA Part 25 and EASA CS 25 regulations

Note: Ability to obtain/maintain a security clearance may be required.

The Structures Company LLC is an AA/EOE.
 
Job Location: CO
Rate: Open - DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Quality Control Inspectors - Goodyear, AZ

Description:
STS AeroStaff Services is hiring Aircraft Quality Control Inspectors for open positions in Goodyear, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Aircraft Inspector completes evaluations of aircraft, engines and components to determine their condition against established standards and performs inspections of work completed by Aircraft Maintenance Technicians (AMT) to verify compliance with approved data. He/She performs work within budgeted time and within client, FAA, and customers’ standards of quality. The Aircraft Inspector is responsible for the effectiveness of client’s inspection function, ensuring compliance with FAA Regulations and Customer requirements, and meeting customer quality expectations.

Job Duties:

• Maintain the daily operation of the Repair Station in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer’s recommendations
• Promote and support all client safety initiatives and programs
• Inspect, evaluate and perform surveillance of work performed by AMT’s
• Inspect aircraft and components by obtaining and interpreting work cards, reviewing inspection requirements’ scope and detail, completing visual inspection of aircraft areas opened by AMT’s including but not limited to fuel tanks, empennage, cargo areas, under floor area, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear
• Ensure that all work is performed using the correct approved data
• Ensure the quality of all completed work meets client and customer expectations
• Perform receiving inspection requirements for new and continued-service parts for serviceability, including but not limited to verifying certification from manufacture or overhaul facility and inspecting for shipping damage
• Conduct weight and balance analysis by using approved maintenance manuals and scales
• Perform NDT inspections if and as authorized on the client’s Management, Supervisory and Inspection Roster
• Ensure completion of logbook entries and “Return to Service” for work completed by the Repair Station
• Ensure proper completion of all client and customer work documents used by the Repair Station
• Comply with all client and customer training requirements
• Promote and assist with On The Job training for newly hired inspection personnel
• Provide technical guidance and assistance to maintenance personnel
• Exposure to the hangar areas while performing inspections
• Exposure to outdoor areas during hot and cold temperature extremes while performing inspections

Qualifications:

• 3+ years’ experience performing as an accomplished aircraft inspector on transport category aircraft
• Capable of interpreting drawings and blueprints to accomplish a specific task
• Must have exceptional written and oral communication skills and be able to interact with a wide variety of people
• Some computer skills (knowledge of MS Office programs such as Word, Excel) are preferred
• High School Diploma or Equivalent required
• Must possess a current Mechanics certificate with Airframe & Power plant ratings

Physical Requirements:

• Near-vision acuity – natural or corrected near-vision acuity in at least one eye, corrected or uncorrected, but be such that the applicant can read a Snellan equivalent of 20/25 (Jaeger number 2) letters at not less than 12 inches [30.5cm] on a standard Jaeger test chart
• This test will be administered annually
• Distance-vision acuity – natural or corrected distance-vision acuity in at least one eye, either corrected or uncorrected, must be better than Snellan equivalent 20/30 (Jaeger number 4 letters at not less than 18.0 inches [45.7cm] on a standard Jaeger test chart) This test will be administered manually
• Color contrast differentiation – capable of distinguishing and differentiating contrast among colors or shades of gray used in the method as determined by the employer
• This test will be conducted upon initial certification and at three year intervals thereafter
• Must be able to lift 50 lbs.
• Must be able to wear and breathe through a full-face respirator
• May be exposed to hazardous chemicals that require the use of safety equipment
• Must be able to bend, stoop, kneel, stand for prolonged periods of time, and climb ladders, stands, and operate man-lifts
• Must be comfortable with heights and confined spaces
• Normal or Corrected Hearing
• Visual acuity must be a minimum of 20/40 corrected
• Must be able to access all areas of the aircrafts

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39640
Job Location: Goodyear, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stability & Control Analyst (Performance & Handling Qualities)

Description:
US Persons ONLY -
• 8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controlability; Performance experience is a plus but majority should come from S&C and flight dynamics.
• Transonic vehicle experience required; Supersonic vehicle experience a plus
• Experience in reversible flight controls
• Experience with SIDPAC toolset a plus


Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons


The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Autodesk Inventor Designer/Drafters - Everett WA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Engineering industry on a permanent or contractual basis.

Keltia Design is in need of a Autodesk Inventor Designer/Drafter to work from our Everett WA.
The job involves modifying some design and draft work on pressure vessels. A minimum of 5 years exp on Autodesk Inventor
This is a short term assignment but there are lots of other opportunities in the pipeline with other projects involving Catia, Solidworks, and Inventor.

-Strong Computer Aided Drafting/Design skills (Autodesk Inventor required).
-Knowledge of industry design and documentation standards.
-Ability to work independently and cross-functionally
-Strong communication and problem-solving skills
-Strong time-management and organizational skills
-Experience adhering to budget and project schedules
 
Job Number: Keltia111417
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Vincent
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Engineers - Purchase, NY

Description:
STS AeroStaff Services is currently hiring Aircraft Structures Engineers for open positions in Purchase, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Structures Engineer reports to the Structures Engineer Manager, and is responsible for the technical accuracy and reliability of aircraft. Additional responsibilities include the Boeing 747 aircraft systems technical accuracy and reliability.

Job Duties:

• Provide budgetary data on projects and issues as directed
• Report on the status of projects and issues as directed
• Issue instructions and documents to economically support operations and return aircraft to service in a safe, airworthy, and timely manner
• Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for repairs, alterations, and modifications
• Update technical source documents as applicable to insure accuracy
• Support integration of new and previously operated aircraft
• Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside engineering departments; regulatory personnel; and other outside agencies
• Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues
• Develop product improvement modifications as directed by Reliability Indicators
• Work with original equipment manufacturers on emerging issues to help ensure safety and airworthiness, but also minimize the economic impact
• Organize, develop and provide all necessary Structures Engineering documentation required to complete aircraft Systems modifications and repairs within the allocated time schedule and budget allowance
• Establish component repair and build specifications to enhance dispatch reliability in accordance with budgetary and regulatory requirements
• Provide technical support to Technical Operations, Ground Operations, Flight Operations, and other Worldwide Holdings personnel
• Coordinate with other Engineering staff to provide 24/7 technical support
• Review systems portion of the Aircraft Maintenance and Inspection Program, and initiate maintenance program changes and changes to maintenance documents

Qualifications:

• 10 years’ Aircraft Structures Engineering
• 5-7 years’ in applied engineering setting
• B.S. Engineering/Technical Engineering Degree (ME or AE) or equivalent experience
• Meets deadlines, daily attendance & punctuality standard
• Remembers & follows instructions, Work is thorough, Alertness, Commitment to task, Perceptivity, Produces accurate, dependable work, Output is consistent, Complete attention to detail
• Volume of work produced meets expectations
• Experience with Microsoft Word, Excel
• Familiarity with aircraft and engine system components
• Strong technical skills and knowledge of large aircraft system design
• Ability to identify cost effective engineering solutions
• Excellent communication skills
• Ability to interface with manufacturers and regulatory agencies
• Some financial analysis skills required

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37297
Job Location: Purchase, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft System Integration Engineer TSI

Description:
UNIQUE SKILLS
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-751-98281
Job Location: Southeast
Rate: $50.00 to $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Engineering Estimating Specialist -

Description:
AIRFRAME ENGINEERING ESTIMATING SPECIALIST

15 MONTHS

STRATFORD, CT

Description:

The selected candidate will provide support the Aircraft Design and Manufacturing Engineering (ADME) organization as member of the ADME Core Services group.

The ADME Core Services group supplements ADME’s technical engineering expertise with best-in-class project execution capabilities enabling it to excel in meeting defined business objectives. The Engineering Estimating element of Core Services supports Sikorsky USGBO Proposals for both Foreign Military Sales (FMS) and Direct Commercial Sales (DCS) customers.

The Engineering Estimating Specialist will:

Support the Estimating Lead by developing estimates and proposal related documents.
Provide detailed estimates to the Estimating Lead based on USGBO schedules, Statements of Work, Configuration Matrices, and Bill of Materials.
Help develop Engineering Design plans to support proposal requirements.
Estimate Airframe Design Engineering budgets.
Must have a working knowledge of Airframe Structures and Aircraft systems. Experience with the Blackhawk product preferred.
Must have a working knowledge of aircraft drawings. Must be able to interpret aircraft drawing and Bills of Material. Experience in Airframe Design required.
Working knowledge of a WBS structure and the SAC Contract Operating System (COS) is preferred.
Must have a working knowledge of DFARS compliant estimating requirements.
Estimate Airframe Process Engineering budgets.
Must have a working knowledge of Aircraft Planning and Tooling methods.
A Working knowledge of Systems, Applications & Products in Data Processing (SAP) and Solumina is a plus.
Review Proposal Statements of Work. Understand requirements and provide feedback on compliance issues.
Review Proposal Schedules. Provide feedback on plan/schedule issues.
Help develop Engineering Integrated Master Schedule (IMS) activities and linkages.
Must be able to work independently and coordinate efforts with concurrent branches/resources.
Experience/Qualifications:

The ideal candidate will demonstrate many or all of the following qualifications:

BS in engineering or suitable equivalent
Minimum of 5-6 years of experience in aircraft design or manufacturing engineering
Minimum of 2-3 years of experience in aircraft estimating
Ability to communicate effectively with leadership and working level team members
Highly motivated and flexible individual with a track record of demonstrated results
Working knowledge of SAC Contract Operating System (COS). Experience with Systems, Applications & Products in Data Processing (SAP) is a plus. Experience with Solumina is a plus
Strong MS Excel, Word & Power Point skills
 
Job Number: 358690
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer - Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7314
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V-5 / Smartteam Designer

Description:
Aircraft would be a plus Not a direct design position Would be Helping Train other employees on Catia
 
Job Number: 8
Job Location: Midwest
Per Diem: Yes
Overtime: Yes
Duration: 6+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/CompanyODA STC/MRA/TC projects.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7316
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineering Contractor

Description:
Unique Skills:
Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/Client ODA STC/MRA/TC projects. Looking for a seasoned/experienced electrical engineer/designer/integrator with Client experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Job Description
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-690-100161
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
Unique Skills:

This position provides technical and project oversight of projects for TC design changes and STCs to Gulf stream's certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable


Education and Experience Requirements:
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.


Position Purpose:
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

Principle Duties and Responsibilities:

Essential Functions: 1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures. 2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance. 4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects. 5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations. 6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

Additional Functions: 1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues. 2. Develops department training material. 3. Assumes responsibility for assigned projects, tasks, or processes. 4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues. 5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned.

Other Requirements: 1. Must be proficient in working with MS Office software. 2. Strong background with Federal Aviation Administration (FAA) certification processes. 3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must be very experienced in working with regulatory requirements. 5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 6. Must have excellent organizational and planning skills.
 
Job Number: 110241
Job Location: savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
Certification Project Spec II - Special Missions

Location: Savannah, GA
Pay Rate: $40/hr - $45/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position provides technical and project oversight of projects for TC design changes and STCs to Company's certified aircraft.
-The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities.

Qualified Candidates:
- must be detail oriented and thorough
- must demonstrate strong technical writing skills of certification documentation
- must be experienced in establishing Certification project plans and leading projects to closure
- have ability to handle multiple cert projects simultaneously
- be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

Position Purpose:
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

Principle Duties and Responsibilities/Essential Functions:
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures.
3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

Additional Functions:
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material. 6. Minimum travel required. Perform other duties as assigned.

Other Requirements:
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 7733
Job Location: Savannah, GA
Rate: 40-45
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Project Spec II - Special Missions

Description:
UNIQUE SKILLS
This position provides technical and project oversight of projects for TC design changes and STCs to clients' certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - must be detail oriented and thorough - must demonstrate strong technical writing skills of certification documentation - must be experienced in establishing Certification project plans and leading projects to closure - have ability to handle multiple cert projects simultaneously - be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree Engineering, Business or related field or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years supporting engineering certification projects and/or activities.

POSITION PURPOSE
Under minimum supervision, performs a variety of engineering tasks to support MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), TC (Type Certificate) and/or other regulatory approval project processes including review of data packages, identification of procedural and certification issues, and providing guidance to engineering on procedures and regulations.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Reviews STC/TC/MRA data packages prior to submission to the FAA (Federal Aviation Administration) for completeness and adherence to the established requirements. Makes decisions and recommendations that are recognized as authoritative to ensure STC/TC/MRA documentation is prepared and processed in accordance with approved procedures.
2. Assists department manager/ODA Program/Project Administrator in providing training and guidance concerning ODA procedures. 3. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving procedural issues that may impact the schedule of STC/TC/MRA issuance.
4. Interfaces with local and foreign authorities on issues related to STC/TC/MRA projects.
5. Actively works to improve the department processes and ensures all work meets customer requirements and expectations.
6. Maintains a current and up-to-date knowledge in the field in order to recommend process changes or innovations that will improve the quality, economy, and effectiveness of the company products.

ADDITIONAL FUNCTIONS
1. Familiar with working regulatory issues and coordinating closure of Issue Papers and other certification issues.
2. Develops department training material.
3. Assumes responsibility for assigned projects, tasks, or processes.
4. Assists department manager/ODA Program/Project Administrator in resolving standardization issues.
5. Keeps abreast of changes to regulatory requirements and guidance material.
6. Minimum travel required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Must be proficient in working with MS Office software.
2. Strong background with Federal Aviation Administration (FAA) certification processes.
3. Strong background with Federal Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material.
4. Must be very experienced in working with regulatory requirements.
5. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures.
6. Must have excellent organizational and planning skills.
 
Job Number: 17-773-110241
Job Location: Southeast
Rate: $40.00 to $45.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Avionics Systems Engineer -

Description:
Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

Primary Responsibilities

Development of requirements
System Integration
Generation of lab and aircraft test procedures
Troubleshooting avionics issues on test, production and fielded aircraft
Support program management reviews
Beneficial Experience

FAA and foreign certification (preferred)
DO-178B, DO-160 and DO-254 processes (preferred)
Technical project management (preferred)
Supplier technical management (preferred)
Pilot or A&P experience (preferred)
Educational Requirements:

BS Engineering in a related field w/7+ years relevant professional experience
Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
 
Job Number: 356482
Job Location: Trumbull, CT
Rate: $56hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
- CATIA V5 and SmarTeam experience required
- Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc)
- Company Aircraft experience preferred

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7299
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Contractor

Description:
UNIQUE SKILLS
- CATIA V5 and SmarTeam experience required - Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavatories, liners, PSU's etc) – Client Aircraft experience preferred Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-755-100245
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Analyst

Description:
Sr. Configuration Analyst

Job Designation

The Sr. Configuration Analyst provides expertise on complex technical data. Examines new and revised product documentation to verify completeness and accuracy of data, and resolves discrepancies with originators, while aligning with Meggitt's policies and procedures.

Job Core Responsibilities

Primary responsibility is to provide configuration management analysis to support the manufacturing of various aircraft products, analyzers, cables, and navel products
Proactively address configuration management related issues and concerns across the program
Maintain version control over multiple baselines being worked and/or fielded simultaneously
Assist in the maintenance and development of CM policy, plans, and procedures to ensure that all projects maintain the integrity of complex software, hardware and documentation throughout the project life-cycle
Ensure compliance to the Configuration Management, Engineering Change Order (ECO), Limited Engineering Order (LEO), Advance Change Notice (ACN), Configuration Control Board (CCB), and item master processes.
Responsible for ensuring that existing Change Management and Change Control processes are systematically enforced throughout the development and production life cycles
Maintain “As-designed” and “As-built” BOM configurations and associated documentation
Work closely with engineers and managers across varied disciplines
Assist in and react to periodic audits on the conformance to CM practices for all Configuration Items, document findings and develop and deploy necessary corrective actions
Prioritize, manage, and maintain workload to established company requirements and deadlines
Perform to established metrics to ensure ISO, CM and contract compliance
Other responsibilities as assigned
The primary duties of this job require administrative, non-manual work directly related to business operations involving responsibility for processes and policies of significance, evaluation of possible solutions and results of the work for which the employee is responsible and making recommendations and/or decisions accordingly using professional judgment. Consistent exercise of independent judgment and discretion in matters of significance
Education: Post-secondary degree or equivalent combination of relevant education and work experience that will allow successful performance of job expectations

Years’ Experience: 7-10 years of relevant experience Skills

A working knowledge of MIL-HDBK-61A and ANSI/ASME Y14.5M is desired
A complete understanding of configuration management and document control is required
Strong analytical skills, project management and process management skills
Excellent communication skills including effective oral, written, and presentation
Solve practical problems and deal with a variety of variables in ambiguous situations where only limited standardization and structure exist
The ability to research, interpret and implement national and military standards governing our business
Knowledge of Class I (major) and Class II (minor) changes is required
Knowledge of Data Management and contract data deliverables management (CDRL/SDRL) is desired
Knowledge of computerized MRP/ERP systems is required
Knowledge of computerized PLM systems is desired
Strong organizational skills with attention to detail and ability to multi-task
An understanding of purchasing, planning, production manufacturing and R&D is required
Understanding of Statement of Work (SOW) and requirements flow up/down is desired
Exposure to commercial and military projects is desired
Ability to prioritize with changing situations
Proficient in Microsoft Office Suite
 
Job Number: KD372601
Job Location: Simi Valley, CA
Rate: $30.00 per hour
Duration: 5 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Electrical Engineer TS I

Description:
Unique Skills:
Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. Position Purpose: Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 111421
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Powerplant/ECS/Fuel Engineer - TS II

Description:
UNIQUE SKILLS
- Technical competency in the evaluation of fuel tank ignition risk assessments on a component level. - Competency in the application of fault and latent failure component design analysis. - M&P experience - Experience with Critical design configuration control limitations, inspections and maintenance procedures to prevent the development of fuel tank ignition sources. Increasing flammability exposure of aircraft fuel tanks. - Experience with identification of systems critical features where maintenance, repairs, or alterations may compromise CDCCLs.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-756-72802
Job Location: Southeast
Rate: $55.00 to $61.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Senior / Design Engineer

Description:
RESPONSIBILITIES
Creates basic designs of aircraft interiors, structures and mechanical systems for Fit, Form and Function to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
• Designs and checks aircraft interior furnishing and/or structures.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.

TARGET QUALIFICATIONS
• Bachelor's degree (B.S.) in engineering, minimum of 5 years relevant experience, or equivalent combination of education and experience. Aviation background and aircraft interior experience preferred.
• Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES
• Ability to design and check interior engineering drawings for Fit, Form and Function.
• Strong Computer Aided Drafting/Design skills using AutoCAD and/or Inventor.
• Three dimensional (3D) design/drafting skills are preferred.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally as part of an established and growing team.
 
Job Number: 17-712
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Technical Specialist I

Description:
Unique Skills:
Check 3D engineering data for conformance to Client requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Client requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of parts list & PdocM, a plus.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-684-98741
Job Location: Southeast
Rate: $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deputy Business Manager of Flight Test

Description:
Development of an overall strategy and plan
2. Development of a detailed flight test schedule
3. Managing/tracking the status with respect to the Integrated Master Schedule milestones
4. Managing/tracking the status with respect to EVMS
5. Providing direction to Aircraft Test Directors to ensure timely completion of priority tasks.
6. Coordinating test program metrics for input for DFC and program management status reporting.
7. Coordinating resources required to accomplish program goals.
8. Assisting in program coordination tasks including scheduling of support facilities and other key assets.
9. Coordinating support requirements with other IPTs and maintaining interface with Sikorsky
 
Job Number: 1744
Job Location: Paxtutent, MD
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: 10/17/2017
Input Date: 11/14/2020
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE STE 214
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer with active Secret required to start / Catia V5 Framemaker TX

Description:
159933/0608
Title: Design Engineer
Fort Worth TX
6 months +
40-50/hr DOE
Interim Secret allowed to start

Description
The selected candidate will work within Engineering and Technology - Operations as part of the Design Process Integration Team. The candidate will be a focal point for the Build-To-Package (BTP) process development, process documentation and publishing, tool implementation, Product Level Feed Down (PLFD) and process audit preparation/responses activities. This position is based in Fort Worth. The selected candidate will be responsible to validate that new and enhanced BTP processes meet Stakeholder requirements and validate that tool changes support the BTP process requirements.

The selected candidate will deliver prerequisite Engineering Functional processes and Command Media and work with Stakeholders to ensure that the process and tools meet the Aeronautics Business and Line of Business Stakeholder requirements. The selected candidate will review documentation and design artifacts for completeness, overlapping requirements and solutions and reuse opportunities. This will include working with stakeholders to ensure project goals and program expectations are successfully met, facilitating discussions and dissemination of technical decisions and pertinent information. Candidate will also be required to publish the documentation using Adobe Framemaker 2015.
Skill/Experience/Education
Mandatory:

- Proficient using Microsoft Office Suite.
- Experience with aircraft/air vehicle engineering drawing requirements, release and change processes.
- Prior experience using CATIA V4, CATIA V5, or CCD.
- Prior experience using Adobe Framemaker
Desired:

- Experience with Build-To-Package release processes and tools.
- Attention to detail and the ability to work in a fast paced environment.
- Strong customer service and excellent written/verbal communication skills.
-Adobe Framemaker 2015 experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Framemaker 2015 0-3 Years No


Interview Required Yes

Shift 1st Shift
OT Allowed No
Travel No
Exempt/Non-Exempt Non-Exempt

Rates
0-4 Yrs Pay Rate: 40.00 USD
5-8 Yrs Pay Rate: 45.00 USD
9+ Yrs Pay Rate: 50.00 USD
 
Job Number: JE-0608
Job Location: Fort Worth, TX
Rate: 40-50/hr DOE
Duration: 6 Months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training - Instructor - Tech Spec II

Description:
UNIQUE SKILLS
CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-758-82041
Job Location: Southeast
Rate: $60.00 to $62.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dynamic Loads Engineer

Description:
Dynamic Loads Engineer

Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Long Term contract


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

As an Engineering Contractor in Dynamic Loads, you will:
• Analyze aircraft structural dynamic response and load distributions for gust, landing and taxi conditions.
• Provide solutions for aircraft vibration problems

What you'll bring to the team:
• Knowledge of aircraft aeroelasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling
• Experience with MSC Nastran and Patran or a comparable application
• Experience with Gust Loads Analysis in MSC Nastran
• Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus

What the Loads & Dynamics team does:
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
 
Job Number: 7170
Job Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Dynamics & Flutter Engineer - AAP

Description:
Dynamics & Flutter Engineer - AAP

Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Long Term contract

Unique Skills:
As an Engineering Contractor in Flutter & Dynamic Loads, you will:
• Provide solutions for aircraft flutter and vibration problems
• Analyze aircraft structural dynamic response and load distributions for gust, landing and taxi conditions.
• Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
• Knowledge of aircraft aero elasticity principles and concepts
• Good general knowledge of FAR/EASA Part 25 requirements
• Experience in structural dynamics modeling
• Experience with MSC Nastran and Patran or a comparable application
• Experience with ground tests such as ground vibration tests or landing gear drop tests
• Experience with flutter flight testing
• Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
• Experience with aeroservoelasticity is a plus

What the Loads & Dynamics team does:
• Creating and delivering a world class aviation experience
• Contributing to the certification of world class business jet aircraft

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7057
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling Systems Engineer

Description:
Candidate should have experience with
• Aircraft environmental control systems (ECS)
• Specialized onboard equipment cooling systems, including ; Liquid cooling systems, Air cycle systems, Vapor cycle systems, Cooling system performance analysis
• Heat exchanger design and analysis
• Component qualification, certification test
• System test and certification
• Part 25 and DO-160 - Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-189
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Cooling Systems Engineer

Description:
ECS Cooling Systems Engineer

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First
**MUST be a U.S. CITIZEN**

Unique Skills:
Candidate should have experience with:
- Aircraft environmental control systems (ECS)
- Specialized onboard equipment cooling systems, including
- Liquid cooling systems
- Air cycle systems
- Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification, certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting development/production of Company products/services.

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works w/out appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7624
Job Location: Savannah, GA
Rate: 70-77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY
Performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management as related to transport category aircraft.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Create step by step work instructions for the removal and installation of hardware and components as they relate to aircraft structures, systems, interiors and avionics. Troubleshooting of noted aircraft systems Repair, design and analysis of metal, composite and metal bond structures Knowledge of the Federal Aviation Regulations FARs from Title 14 of the Code of Federal Regulations as they apply to transport category aircraft. Knowledge of cabin specific regulatory requirements, including flammability and crashworthiness as examples Familiarity with the Supplemental Type Certificate STC process Familiarity with the FAA Airworthiness Directive AD process and rules governing disposition Translates guidance and engineering principles and procedures into usable working direction for assigned projects Ability to read and interpret technical drawings, preferably those created by Boeing, Airbus and Douglas. They should also be familiar with the documents needed to routinely maintain commercial aircraft Structural Repair Manual SRM, Aircraft Maintenance Manual AMM, Illustrated Parts Catalog IPC, etc. Ability to analyze Original Equipment Manufacturer OEM source documents Service Bulletins, Service Letters, etc. and make independent decisions based on analysis of available data regarding incorporation on Customers fleet. Ability to quickly learn and adhere to Operators specific processes and procedures. Project Management skills multiple task Gathers, coordinates and applies basic engineering data using established and appropriate or defined engineering principles and procedures Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems Reviews progress with management and recommends corrective action along with review of alternatives Performs such individual assignments as supervisors and superiors may direct ensures adequate and continuous controls are exercised over all assigned activities affecting quality establishes and maintains effective work relationships within the department, the Corporation and the community and maintains the professional competence, knowledge and skill necessary for the satisfactory performance of all assigned responsibilities Travel as required All other duties as assigned.
 
Job Number: 17-729
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -EWIS -Cabin interior monuments -Seats

Education/Experience
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-175
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret FL

Description:
159949Requirement# SOF-REQ-0252
Work Location FORT WALTON BCH, FL
Work Week 5/40
Priority High
Needed Date 08/21/2017
End Date 08/21/2018
Number of Resources 1
Security Clearance Secret

Title: Electrical Engineer - Level 3
Description
As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.

Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool
Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written

Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft
Experience with an engineering change process and/or configuration control process

Skill/Experience/Education

Mandatory:

AutoCAD
MS Office Suite

Desired:

CATIA V5
TeamCenter Engineering
JobScope/ IT Reports

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
AutoCad CAD Software 4-5 Years Yes
MS Office Suite Office SW 4-5 Years Yes



Interview Required Yes

Min Pay Rate 35.00 USD
Max Pay Rate 45.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-0252
Job Location: Fort Walton Beach, FL
Rate: 35-45/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level III

Description:
Electrical Engineer - Level III
Fort Walton Beach, FL
1 Year Contract
$35.00-45.00/Hr


Description

As an Electrical Engineer, you will work as part of an engineering team. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.

Experience with aircraft wiring and electrical systems
Ability to create and review various electrical drawing types (wire diagram, termination, cable harness, routing)
Experience with AutoCAD or similar 2D drafting tool
Demonstrated previous success working in a team based environment to meet objectives
Strong communication skills, both oral and written

Familiarity with SAE AS50881 design guidelines
Understanding of ANSI/ASME Y14.100 or related design and drafting standards
Familiarity with C-130 or other fixed wing aircraft
Experience with an engineering change process and/or configuration control process


Skill/Experience/Education

Mandatory:

AutoCAD
MS Office Suite

Desired:

CATIA V5
TeamCenter Engineering
JobScope/ IT Reports
 
Job Number: 7661
Job Location: Fort Walton Beach, FL
Rate: $35.00-45.00/Hr
Per Diem: Possible Split
Overtime: Yes
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Requirement #AERO-REQ-0578
Work location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 06/27/2017
End Date 01/31/2018
Number of Resources1
Security Clearance Secret (Prime Contract: Circle A, Can start w/o clearance: No, Interim Clearance Sufficient: No)

Title: Electrical Engineer-N
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on electrical schematic design and Generator Control Unit (GCU) integration for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.
Skill/Experience/Education
Mandatory:

Experience creating electrical schematics and developing aircraft electrical power systems. Secret Clearance with investigation within the past five years.
Desired:

Experience with Generator Control Unit (GCU) integration. Experience with Mentor Graphics Capital Harness; Experience designing analog circuit logic. Experience with CATIA V5.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Elecrical Circuit Design Perform analog circuit logic and schematic design. 9-10 Years Yes
Electrical Power System Design Design aircraft Electrical Power Systems, specifically Generator Control Unit integration. 6-8 Years Yes



Interview Required Yes
OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt
 
Job Number: JE-0578
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret TX

Description:
159931/0607
Title: Electrical Engineer
Fort Worth TX
47-67/hr DOE
Interim Secret required to start
6 months +


Description
This position is located in Fort Worth, TX. The selected candidate will work within Technical Operations as part of the CAD/CAM and Engineering Services Team. Duties include providing Electrical Engineering (EE) expertise to support the development and deployment of Electrical Engineering CAD/CAM capabilities. Coordinate with the Aero IT organization to develop and deliver viable tools for the EE CAD/CAM user community. Develop supporting documentation (methods, standards, processes and training) to support tool implementation. Perform capability validation of tool and process requirements. Deliver prerequisite Engineering Functional processes and Command Media. Review documentation and design artifacts for completeness, overlapping requirements and solutions, and reuse opportunities. Support resolution of technical issues within the CAD/CAM environment. Work with stakeholders to ensure project goals and program expectations are successfully met. Facilitate discussions and dissemination of technical decisions and pertinent information.
Skill/Experience/Education
Mandatory:

-Electrical Design Experience using CATIA
-Experience with CATIA V5 (1000 hour minimum).
-Experience with aircraft/air vehicle engineering drawing requirements, release and change processes.
Desired:

-Bachelors degree from an accredited college in a related discipline.
-Attention to detail and the ability to work in a fast paced environment.
-Strong customer service and excellent written/verbal communication skills.
-1000 hours experience with CATIA V4
-1000 hours experience with CATIA V5 Harness Design Workbench
-Prior experience using Product Data Management (PDM), AeroSource




Interview Required Yes
Shift 1st Shift
OT Allowed Yes (OT Limitation: No)
Travel NoExempt/Non-Exempt Non-Exempt

Rates
0-4 Yrs Pay Rate: 47.00 USD
5-8 Yrs Pay Rate: 58.00 USD
9+ Yrs Pay Rate: 67.00 USD
 
Job Number: JE-0607
Job Location: Fort Worth, TX
Rate: 47-67/hr DOE
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
• Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
• In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
• Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
• Extensive knowledge of EWIS component selection criteria;
• Experience with Mentor Graphics Capital Harness System (CHS)
• Preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
Position Purpose
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services. Principal Duties and Responsibilities
Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
Additional Functions
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-185
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 7231
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term Contract



Unique Skills:
Applicant shall:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7031
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift


Unique Skills:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6951
Job Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer Vice Installation

Description:
Applications Engineer Vice Installation
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education/Experience: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Company products and services .

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7517
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness installation Engineer

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-676-94842
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power-Loads Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
Required Experience in the following:
• Electrical Power Generation, control and indicating
• Power Distribution, control and indicating
• Electrical Load Analysis

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management Skills/Experience
• Configuration change management
 
Job Number: 17-742-103561
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power/Loads Engineering Contractor-Special Missions

Description:
Electrical Power/Loads Engineering Contractor-Special Missions
Savannah, GA
Rate: $58-$63

Unique Skills:

Required Experience in the following:

Electrical Power Generation, control and indicating Power Distribution, control and indicating Electrical Load Analysis Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Job Description.

5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline Desired Experience in the following: Working Knowledge ARP4754 and CFR 25 Project Management Skills/Experience Configuration change management
 
Job Number: 7526
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design-Aircraft Interiors Engineering Contractor

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-738-104881
Per Diem: Yes, based on Eligibility
Overtime: Possible
Duration: Year Plus
Start Date: ASAP
Input Date: 09/20/2022
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design/Aircraft Interiors Engineering Contractor

Description:
Electrical Systems Design/Aircraft Interiors Engineering Contractor

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related advanced degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works under minimal direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7518
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7677
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Tech Design

Description:
EE Technical Designer 2
Maintains releases and assists in developing electrical/mechanical drawings, systems designs or engineering documentation and data, by applying Company, industry and governmental standards. Using design tools, prepares documentation and incorporates basic design changes. Creates, develops and maintains elementary systems designs. Supports engineering system design and functionality validation activities. Supports the development and maintenance of moderately-complex product installation designs and part designs. Supports coordination with internal partners and external suppliers. Works under general supervision.

Technical Skills CATIA V5

Education:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Travel may be required to support wiring installation on aircraft during mod in Mesa, AZ.

Must be US Person for purposes of Export Compliance.
 
Job Number: 39041
Job Location: Fort Walton Beach, FL
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical. FLT CNTRL/SIM. LABS

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 16-604-1396
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors & Systems Engineering Contractor

Description:
Electrical/Aircraft Cabin Interiors & Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to:
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- EWIS
- Cabin interior monuments
- Seats

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7428
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer

Description:
Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASASP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
159734/1412
Title: Embedded S/W Engineer - Level 2
Grand Prairie, TX
80/hr max
Active secret required to start

Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering


US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1412
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159151/1366
Location: Grand Prairie, TX
Compensation: 80/hr max
Assignment Length: 12 month contract
Security Clearance Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: JE-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Oil Systems engineer

Description:
Ingenium is searching for an experienced aircraft engine oil systems engineer for a client in Illinois.
Good position supporting the development of client capability in the design and architecture of engine oil systems. Permanent or contract dependent on candidate preference and capability

Must be a US Citizen or Green card holder.
No Visa Candidates can be considered.

Specific experience with products or the understanding of systems needed such as:

Lube & Scavenge Pumps (Vane, G-rotor, Gear)
Oil/Oil and Air/Oil Heat Exchangers
Oil Reservoirs
Oil Filters
Air/Oil Deaerators & Deoilers
Ancillary valving (Relief, Bypass, Check, etc…)
Typical Engine Oil System requirements
What drives component design requirements
How these components interact within the Engine system
Oil System Analyses (hydraulic, dynamic, etc…).

Must have an Engineering degree or advanced degree.

Customer is looking for onsite support for an extended period.
Contract, Contract to hire or direct employment will be considered.

Credentials and experience are the key items which will determine pay and employment options.

If this is you and you have experience in these areas, send resume and cover to dave.johnson@ingeniumtech.com.


Employment Criteria: Must be eligible to work in the US without sponsorship and able to pass a drug test and background check

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
 
Job Number: 92916
Job Location: Rockford, IL Illinois
Rate: comensurate
Per Diem: Possible
Overtime: Possible
Duration: 1-2 yrs.
Start Date: immediate
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Dave Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis - 3 / no clearance / CA

Description:
1597
Engineer Structural - 3 (Job Number: 17011443)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 12, 2017

Engineer Structural - 3 (3)

Pay Rate: $53 - $55/hr.

Work Schedule: 9/80

Location: El Segundo

Duration: 1 year

The successful candidate shall be able to perform stress analyses of metallic and composite aircraft structures. The position requires knowledge of aircraft stress. The position will require the performance of static of metallic and composite airframe structure using classical ‘hand’ methods and also using automated methods and procedures approved for the program. Required skills include the ability to manipulate and pull loads from the Global Loads Models, and to build and apply loads to local breakout models. The stress analyst shall ensure that designs meet program requirements for strength, durability, and damage tolerance, and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives . The analyst should work well in a team environment and create high quality analysis reports and presentations.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

•Proficiency with NASTRAN, Patran, FEMAP, and Matlab
•Experience in composite structural test applications
•Advanced knowledge in durability and damage tolerance analysis methods
•Complete understanding of structural analysis techniques, concepts and practices
•Excellent written and verbal communication skills
•Must be a self-starter and be able to handle multiple tasks in parallel


Preferred Qualifications:

•Experience with layout sizing and structural integrity evaluations of primary and secondary structure
•Experience working in a liaison engineering environment, resolving MRB issues
•Experience working on military aircraft
 
Job Number: MB-17011443
Job Location: El Segundo, CA
Rate: 53-55/hr
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Contractor/Checker

Description:
Engineering Contractor/Checker

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Review 3D engineering data for conformance to Company requirements as directed.
-Check parts for fit, form and function to the extent that information is available.
-Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed.
-Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding Company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of Company parts list & PdocM, a plus.
• Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.
• Knowledge of Excel, Share Point software, Microsoft Office a plus

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 7680
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Repair Technicians - Sterling, VA

Description:
STS AeroStaff Services is currently hiring Entry Level Repair Technicians for open positions in Sterling, Virginia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

This is a position for an assembly/repair technician working on Aviation Cargo Containers and Baggage Carts.

Job Duties:

• Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
• Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
• Comply with FAA and company policies and procedures
• Ensure accurate and timely completion of work orders
• Ability to perform routine and non-routine tasks independently
• Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
• Maintain safe and clean work environment
• Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
• Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
• Provide feedback/suggestion to improve customer satisfaction
• Perform any other duties as assigned by the Station Manager/Supervisor

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38278
Job Location: Sterling, VA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Long Term contract


Unique Skills:
- This position requires experience with the design, installation, and certification of aircraft systems and equipment.
- Experience with composite layups and water/waste systems is a plus.
- The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations.
- The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification.
- Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7090
Job Location: Savannah, GA
Rate: $60-$65
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
- Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
- Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
- CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7224
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with water/waste systems or fluid systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The candidate should also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7424
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift

Unique Skills:
- This position requires experience with the design, installation, and certification of aircraft systems and equipment.
- Experience with composite layups and water/waste systems is a plus.
- The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations.
- The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification.
- Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7421
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer TS II

Description:
UNIQUE SKILLS
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with composite layups and water/waste systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the CPDM, tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The ideal candidate would also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-735-94081
Job Location: Southeast
Rate: $60.00 to $65.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer TS II

Description:
UNIQUE SKILLS
This position requires experience with the design, installation, and certification of aircraft systems and equipment. Experience with water/waste systems or fluid systems is a plus. The candidate should have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design. The candidate should be able to interpret and generate system schematics and should have experience with aircraft integration with multiple other aircraft design organizations. The candidate should also have experience with supplier joint development and integration tasks as well as system and component certification and qualification. Experience in the use of MS Office tools and preparing presentations in support of design and technical reviews is a plus.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-734-101989
Job Location: Southeast
Rate: $60.00 to $63.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads and Dynamics Engineer

Description:
External Loads and Dynamics Engineer
Full Time position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
General Summary: 
 
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
 
Duties and Responsibilities:
Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
Knowledge of mass properties principles as they relate to loads analysis required.
Knowledge and experience with cable-driven / mass-balanced flight control systems required
Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
 
 
 
 
 
 
 
 
Job Details
City
Greensboro
State
North Carolina
 
Job Location: Greensboro, NC
Rate: "open"
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineer

Description:
1. Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment,
2. Finite element modeling,
3. Understanding of certification requirements to FAR Part 25 and EASA CS.

Job description:

Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 24-190
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineer

Description:
Location: Savannah, GA
Rate: $135.00/HR
Duration: Long Term contract
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
- FAA DER Stress experience required.
- Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7676
Job Location: Savannah, GA
Rate: $135.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAA DER Stress Engineering Contractor

Description:
UNIQUE SKILLS
Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. Job description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-771-109481
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FP Completions- Mechanical Design Engineer

Description:
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 109081
Job Location: Savannah, GA
Rate: 58-63
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Gerry Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Phase-Mechanical/Interiors Design Engineer

Description:
Final Phase-Mechanical/Interiors Design Engineer
Savannah, GA
Rate: $58-$63
Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -

Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.


4X10
 
Job Number: 7675
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Followers - Ypsilanti, MI

Description:
STS AeroStaff Services is hiring Flight Followers for open positions in Ypsilanti, Michigan.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Flight Followers are delegated the authority for operational control by the Director of Operations and exercise operational control jointly with the PIC. Flight Followers prepare and distribute domestic and international Flight Releases, runway analysis, and weather data in accordance with existing policies and procedures, in support of scheduled, chartered, and ad-hoc flights. The highest priority of each Flight Follower is the safety of flight.

Essential Duties and Responsibilities:

• Monitors the status of all planned flights (scheduled, chartered, or ad hoc), and flights in progress from the point of origin to final destination (flight following)
• Releases flights in accordance with all applicable policies, procedures and regulatory requirements
• Collects and disseminates weather and aeronautical information to the PIC by preparing Flight Operations paperwork
• Ensures all ground handling, deicing, fuel, landing/departure slots, and landing/overfly permits are in order before releasing a flight
• Identifies, anticipates, and takes corrective action to minimize actual/potential delays due to weather, scheduling, operations, crew legality, and maintenance issues
• Advises appropriate personnel of potential/actual delays and conditions affecting safety of flight
• Coordinates with Maintenance Control to ensure aircraft status will permit the intended operation to be conducted safely and in accordance with applicable ATC, government laws, and International policies
• Ensures that MEL/CDL limitations or restrictions are evaluated and complied with
• Determines airport suitability/risk assessment
• Maintains a shift log for recording key data for all assigned flights and missions
• Complies with all applicable federal/state health and safety regulations
• Performs other related duties as requested

Qualifications:

• Must be a U.S. Citizen
• High school graduate; some college and/or technical school desirable
• FAA Dispatcher’s certificate is required
• Experience in a FAR 121/135 flight operations center is required
• International experience preferred
• Must have good working knowledge of world geography
• Must possess exceptional attention to detail and abstract problem solving capabilities
• Ability to read, write and understand spoken and written English
• Ability to write routine reports and correspondence
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals
• Ability to convert between different units of measure

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39615
Job Location: Ypsilanti, MI
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences (Aircraft Performance)

Description:
Our client is a flight test, engineering and certification organization that provides services to aircraft modifiers and OEM’s is seeking Flight Sciences Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking contract or full-time engineers to join the teams in Seattle and Moses Lake with at least five years' experience in flight sciences, including Aircraft Performance.

Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer

Location: Savannah, GA
Pay Rate: $56/hr - $67/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control.
-Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
-Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6952
Job Location: Savannah, CA
Rate: 56-67
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer -

Description:
JSG is looking for Flight Test Engineer in West Palm Beach for a 15 month contract!

Description:

Plan, conduct, manage, and report on Powerplant and related propulsion systems helicopter ground and flight tests.
These tests include thermal surveys, fire extinguishing and suppression system evaluations, determination of installed engine power, inlet and exhaust surveys, and characterization of engine-airframe compatibility together with FADEC-based control systems, fuel systems, environmental control systems, and icing / snow evaluations.
Test planning involves determining measurement requirements, developing an overall test approach, and defining maneuvers and conditions for which data is to be obtained in order to meet test objectives in a safe and efficient manner.
These details are written into published test plans.
Test conduct involves coordination with instrumentation and aircraft operations personnel, briefing flight and ground crews, and monitoring tests in real-time using telemetry. Large volumes of flight data are processed and analyzed.
Post-test reports documenting the flight test results are developed and presented to the qualifying or certificating authorities.
Possible relocation to Pax River, MD facility.

Experience/Education Required:

Minimum 7+ years experience in Flight Test Minimum Bachelors' of Science in AE or ME
 
Job Number: 356470
Job Location: West Palm Beach, FL
Rate: $64hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Project Manager

Description:
Responsible for the planning and execution of a flight test program. This includes, but is not limited to the following activities:
1. Development of an overall strategy and plan
2. Development of a detailed flight test schedule
3. Managing/tracking the status with respect to the Integrated Master Schedule milestones
4. Managing/tracking the status with respect to EVMS
5. Providing direction to Aircraft Test Directors to ensure timely completion of priority tasks.
6. Coordinating test program metrics for input for DFC and program management status reporting.
7. Coordinating resources required to accomplish program goals.
8. Assisting in program coordination tasks including scheduling of support facilities and other key assets.
9. Coordinating support requirements with other IPTs and maintaining interface with Sikorsky functional organizations and Government core competencies

Required Education & Experience:
- Master’s Degree w/ 3 years' of professional experience
- Bachelor’s Degree w/ 5 years of professional experience
 
Job Number: MD35252
Job Location: Patuxent River, MD
Rate: $55.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
The Flight Test Mechanical Design Engineer will be responsible for reviewing defects, establish root causes and providing dispositions to repair the discrepant condition using engineering best practices. - Ensuring that the proposed repair is equivalent to the Blueprint design and that it will not affect system functionality. - Acting as the single point of contact for Mechanical Design and Flight Test MRB to supports Operations during the weekend shift to maintain aircraft availability. The following qualifications are required for this role: - Strong working knowledge of Flight Test Instrumentation Mechanical Design. - Strong working knowledge of Flight Test Aircraft Systems. - Working knowledge of CATIA V5, SmarTeam and Solumina. - Must be able to work the weekend shift (4/10 schedules Friday - Monday).

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Nav & Ctrl Eng - Level 3 with active secret TX

Description:
160099
Requirement #MFC-REQ-1462
Work Location GRAND PRAIRIE, TX
Work Week 9/80-A
Needed Date 08/14/2017
End Date 08/13/2018
Number of Resources 1
Security Clearance Secret

Title: Guidance, Nav & Ctrl Eng - Level 3
Description
Engineer needed to generate simulation models in an existing Fortran 6-DOF simulation, update guidance and control algorithms and parameters, update performance predictions and models with flight test data, and perform pre-flight and post-flight analysis to support missile flight tests. Clearance status required on resume.

Skill/Experience/Education
Mandatory:

Simulation development experience in a high-level language. Data analysis experience. Fortran programming.
Desired:

Programming in C++ and Matlab. Experience with missile applications.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Simulation modeling Creating simulation math models to capture the performance of missiles, aircraft of subsystems.
0-3 Years No
Fortran programming Coding in Fortran.
0-3 Years Yes
Missile performance analysis Experience predicting and analyzing performance for missile systems
0-3 Years No


Interview Required Yes
Max Pay Rate 94.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1462
Job Location: Grand Prairie, TX
Rate: open rate
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HOT - Subsystems Engineer

Description:
Description
Candidate will be responsible for the structural design, installation, and integration for various structure and subsystems on a unique aircraft. Engineer must be capable of taking structural design and systems/subsystems requirements and developing installation designs including line replaceable units to antenna separation, bonding requirements, hydraulic, fuel, auxiliary power, and environmental control system tubing and harness routing. Candidate will be completely responsible for various subsystem LRU's integration into the airplane for installation. They will be expected to identify and coordinate with the affected disciplines from Avionics, Software, Electrical, Structural Design, Material and Process Engineering and develop complete design solutions. Required to create detail designs including 3D lay-outs, assemblies, and installation drawings using CATIA V5. Must create separate detail parts lists to accompany drawings.

Mandatory:
5 or more years experience in the design of aircraft primary or secondary structures.
Proficient with CATIA V5
Must be a US Citizen or legally authorized to work in US as a permanent resident.
Understanding of drawing practices, material properties, and manufacturing processes.

Desired:
Bachelor or above Degree in an Engineering Technical discipline.
Experience with composite structure design or manufacturing.
Experience with hand stress analysis for initial part layout.
Experience with GD&T (Geometric Dimensioning and Tolerancing).
Excellent writing and communication skills.
 
Job Location: Palmdale,, CA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics & Landing Gear Engineer

Description:
Hydraulics & Landing Gear Engineer

Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
As a Hydraulics & Landing Gear Engineer (TSII) you will be responsible for installations for aircraft systems with an emphasis on hydraulics and landing gear.
- Qualified candidates must have experience with component requirement definition, qualification testing, and supplier management.
- In addition to experience with hydraulic system and hydraulic component design, the ideal candidate would have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
- Must be able to interpret and generate system schematics and should have experience aircraft integration with multiple other aircraft design organizations.
- Experience with ARP 4754A, the ability to create/decompose requirements, and the V & V on these requirements is preferred.


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7426
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics and Landing Gear Engineer

Description:
Hydraulics and Landing Gear Engineer
Location: Mojave, CA
Duration: 12+ months contract
Rate: Up to 65/hr
Overtime potential
Per diem if you qualify
Holiday pay, annual bonus pay, sick pay, 401k
Company is seeking an experienced Hydraulic Engineer with experience in Aircraft Mechanical Systems and Aircraft landing gear design background. The primary task of this role engineering role will be to develop and refine system level requirements and engineering design for all hydraulic systems and landing gear, including components and rolling stock
Key Components
Perform CATIA modeling and model validation
Perform component testing and writing flight testing plans
Evaluate the aircraft hydraulic system's functionality, failures and system design
Evaluate the current aircraft's landing gear design for suitability to the mission with new designs
Conduct reliability analysis on hydraulic aircraft systems and components
Evaluate data from the initial program build for verification and validation purposes and identify further testing or development work
Work closely with the pilots of the vehicles to ensure the hydraulic and landing gear meet the customer requirements
Review update and compile engineering definition of related aircraft mechanical system components and assemblies based on records from the initial build project
Ability to review hydraulic and landing gear schematics and designs quickly to solve problems or to find opportunities to improve systems design
Have a keen understanding of hydraulic system components and landing gear kinematics
Ability to assess the needs of the task and carry out the necessary course of action with minimal supervision. He/she must possess the technical background, organizational and interpersonal skills to work with other groups, suppliers and customers
Develop standardized design criteria and templates using model based definition practices
Establish Product Lifecycle Management architecture using PLM and ERP software
Support review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confer with management, systems safety, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Key Requirements
Professional Requirements
Proven experience in aircraft hydraulic systems/landing gear design operation and troubleshooting
5-7 years engineering experience in similar role
Background which includes system certification with the Federal Aviation Administration (FAA), as well as other certification authorities
Experience with computer modeling of landing gear systems and components including model validation
Experience with simulation software such as Simulink or Flowmaster
Experience in progressing hydraulic systems from design to implementation in a very short period of time
Experience in aircraft mechanical system design, assembly and test processes
CAD experience
Excellent Organizational Skills and problem-solving skills
Excellent computer skills, Microsoft Word, Excel and Powerpoint
Knowledge of FAA part 25/23 FARs and other aircraft standards a plus. Experience with manufacturing- based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Bachelor’s degree in Mechanical Engineering or equivalent experience
The Structures Company is an AA/EOE.

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to 65/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics/Landing Gear Engineer

Description:
• As a Hydraulics & Landing Gear Engineer (TSII) you will be responsible for installations for aircraft systems with an emphasis on hydraulics and landing gear.
• Qualified candidates must have experience with component requirement definition, qualification testing, and supplier management.
• In addition to experience with hydraulic system and hydraulic component design, the ideal candidate would have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
• Must be able to interpret and generate system schematics and should have experience aircraft integration with multiple other aircraft design organizations.
• Experience with ARP 4754A ,the ability to create/decompose requirements, and the V & V on these requirements is preferred.
 
Job Number: 24-182
Job Location: Savannah, GA
Rate: $60-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ITF Design Engineering Contractor II

Description:
UNIQUE SKILLS
CATIA V5, SmarTeam, Sheetmetal Design, Bolt Joint Design, client sustaining and AAP aircraft systems a plus, 3D prototyping experience a plus, SharePoint experience a plus

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelor’s degree. Experience credit will be considered for related advance degrees limited to 2 years for Master’s Degree and 4 years for PhD in fields applicable to this job position.

POSITION PURPOSE
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of client aircraft.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones
3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
4. Ability to convey technical concepts in both written and verbal formats
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
6. Works under general supervision for routine tasks of minor complexity
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 17-753-104385
Job Location: Southeast
Rate: $45.00 to $50.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineers

Description:
Looking for 4 MP&P Engineers
*Degree
*Composites
*Structures Background
*Aerospace/Aircraft Background

Email resumes to: mmccarthy@pdstech.com
 
Job Number: MP&P-AL
Job Location: Tallassee, AL
Rate: $55.00-$60.00
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

Principal Duties and Responsibilities
1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
9. Perform dispatch reliability and aircraft availability information review and calculations.
10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

Other Requirements:
1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
2. Proficient knowledge of MSG-3 Maintenance Program Development process.

Experience/Education Required
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62 to $67/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
Maintainability Engineer III

Location: Savannah, GA
Rate: $63.00 - $67.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
1) Maintainability Predictions in accordance with MIL-HDBK-472, and
2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications.
3) Catia skills highly desirable.


Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.


Position Purpose:
Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:
Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 7572
Job Location: Savannah, GA
Rate: $63.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer III

Description:
Maintainability Engineer III

Location: Savannah, GA
Rate: $50.00 - $60.00/hr
Duration: Long Term contract
Shift: 1st Shift


Education and Experience Requirements:
Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:
Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.
 
Job Number: 7455
Job Location: Savannah, GA
Rate: $50.00 - $60.00/hr
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Operations Analyst IV (CA) - Aircraft

Description:
Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develop manufacturing concepts and strategies to support business objectives. Develop and integrate suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.

Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: MFGHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Eng Contract Lead

Description:
UNIQUE SKILLS
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - Closets - Crew rest areas - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-775-112881
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Eng Contract Lead

Description:
Unique Skills:

Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - Closets - Crew rest areas - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

deal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development
 
Job Number: 112881
Job Location: savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Aircraft Interiors Engineering Contract Lead

Description:
Mechanical Aircraft Interiors Engineering Contract Lead

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Ideal Candidates will have experience leading a mechanical engineering team that are developing Aircraft Cabin Interiors and Systems to include but not limited to:
- Seats
- Galley
- Lavs
- Closets
- Crew rest areas
- LRU installations
- Liners
- Water System
- Waste System
- Mechanism design and validation
- Prototype development

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7735
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2 with active secret KY

Description:
159894
Requirement #SOF-REQ-0247
Work Location
Lexington, KY
Work Week 5/40
Priority
Needed Date 08/07/2017
End Date 05/07/2018
Number of Resources 4
Security Clearance Active Secret


Title: Mechanical Design Engineer - Level 2
Description
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and sub-assemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.
Skill/Experience/Education
Mandatory:

• Familiarity with ANSI/ASME Y14.100 or similar design and drafting standards • Experience with Catia V5 or similar 3D parametric modeling and drafting • Perform detailed drawing checks and be responsible for completion of production ready drawings • Ability to work under little or no direct supervision • Demonstrated previous success working in a team based environment to meet objectives • Active DoD secret clearance
Desired:

• Any familiarity with C-130 aircraft, specifically C-130J • Air Force or DoD experience • Experience or familiarity with engineering change documentation • Experience with Teamcenter PLM software

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 or similar program 0-3 Years Yes
Drafting 0-3 Years Yes
Structural component and assembly design 0-3 Years Yes



Min Pay Rate 30.00 USD
Max Pay Rate 50.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-0247
Job Location: Lexington, KY
Rate: 30-50/hr max
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Location: Savannah, GA
Pay Rate: $50/hr - $55/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Mechanical Engineer required for Completions Design / Aircraft Cabin Interiors.
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSUs, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
-Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
-Design Engineer will be required to liaison with the shop on engineering issues.
-Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
-Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
 
Job Number: 7648
Job Location: Savannah, GA
Rate: 50.00-55.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer - Tech Spec II

Savannah, GA
Rate: $60-$63
Long Term contract

Unique Skills:

Must be proficient in V4 and V5 Catia with Smarteam experience. Must have experience with design and Electrical Equipment Installations or Aircraft Mechanical Systems design. Previous Aircraft STC modification experience is desired. Previous Gulfstream Experience preferred. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7058
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 3 month contract
Shift: 3rd Shift

**MUST have an Active Secret Clearance or to have had one within the last 2 years**

Job Description:
- Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
- Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Skill/Experience/Education
Mandatory:
- Mechanical and or Electrical Engineer. C-Shift.
- On aircraft and off-aircraft operational requirements.
- Schedule In this role, The employee will review designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Aircraft Experience
- Experience with Lean Six Sigma practices
- SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7667
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following preferred skills:
Category Name Required Level
Technical Skills CATIA V5 No Intermediate

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. May require travel to Mesa, AZ to support aircraft survey and/or support shipside installation. Must be US Person for purposes of Export Compliance.
 
Job Number: 39043
Job Location: FL
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and interpret engineering documents and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support.
• Systems design and/or qualification experience is a plus.
• A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Auxiliary Mechanisms, Hydraulics, Crew and Equipment, Doors, Flight Deck and Furnishings, Fuel, and secondary structures.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-170
Job Location: Savannah, GA
Rate: $59 - $62/hour
Per Diem: YES
Overtime: YES
Duration: 1 plus years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Aircraft Cabin Interior & Systems Engineering Contractor

Description:
Mechanical/Aircraft Cabin Interior & Systems Engineering Contractor
Savannah, GA
Rate: $58-$63

Unique Skills:

Ideal Candidates will have mechanical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7429
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Aircraft Cabin Interior and Systems Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-726-102175
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Oxygen Systems Engineer

Description:
Oxygen Systems Engineer
Full Time position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
 
General Summary: 
 
The Oxygen System Cognizant Engineer is responsible for providing technical expertise in support of the Oxygen System through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:
Oversee and coordinate Oxygen System project activities through all phases of the project including preliminary design, detailed design, development, certification, production and in-service product support
Interface with other company departments, FAA and suppliers to ensure project schedule milestones are met 
Actively support the development of company infrastructure
Maintain consolidated Engineering Parts List (EPL), weight status and cost status for the Oxygen System
Support design, manufacturing (production), in-service and flight test activities
Maintain and present to management integrated project schedule and status for layouts, ICD’s, drawings, development tests, certification tests, flight test plans, ITF tests related to the Oxygen System and plans/status to resolve flight test, manufacturing and in-service issues
Track and report status of action items related to design, development, certification, sustaining, in-service and flight test related to the Oxygen System
Provide support as required in other areas of the Mechanical Systems 2 team that includes bleed air systems, air conditioning, waste system, and ice and rain protection systems
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
5+ years of directly related technical experience in the development and certification of aircraft Oxygen Systems required
 
Knowledge, Skills and Abilities:
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred
Knowledge of FAA processes and procedures related to qualification testing required.
Knowledge of DO-160, DO-178B and DO-254 processes are required
Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Oxygen and ECS regulations required
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata is preferred
Familiarity with ERP Systems such as SAP
Proficiency in Microsoft Office Suites (Word, Excel, Project, Lotus Notes, PowerPoint) is required
Ability to understand, prepare and review FAA certification plans
Ability to prepare detailed functional test procedures
Ability to manage projects end to end including defining project goals, creating project plans, tracking performance, analyzing project schedules, and presenting information to senior management.
Ability to establish and manage project budgets
 
 
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: "open"
Duration: FullTime
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Assurance Engineering Specialist I

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Seeking engineering-based position within the quality organization related to design model checking & verification.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Advanced degree in engineering or related curriculum preferred. 5 years in a specific technical discipline or 8 years broad eng experience in several technical disciplines. Credit will be considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to the position

Position Purpose:
Collaborates with engineering, operations and procurement in a team environment on development programs and assists in ensuring aspects of the designs, test articles and supplied/manufactured articles are capable of being produced in accordance with approved quality system requirements and certified as compliant to aircraft type design requirements.

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to incorporating design quality assurance on development programs and participates in new product design and development, design validation/verification, risk management, planning, flight test and design change activities. 2. Partner with design engineers and assist in resolving quality issues and executing design, development, and design transfer initiatives which may include design/process quality capability analysis, supplier selection, requirements incorporation validation. 3. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. 4. May partner with Manufacturing Engineers to develop/validate manufacturing processes and provide technical quality support for process planning. 5. Assists in use of risk management tools (i.e. FMEA) as appropriate. 6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements: 1. Good understanding of and experience with key design characteristics definition, FMEA, statistics theory and application (SPC) preferred. 2. Competencies include: Design control, project management skills, strong interpersonal skills, excellent computer skills, risk management, and strong results orientation. 3. Familiar with Geometric Dimensioning & Tolerance (GD&T) 4. Knowledge of state-of-the-art quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts preferred. 5. Ability to read, analyze and interpret technical documents, Engineering drawings and 3D models. 6. Ability to define problems, collect data, establish facts, and draw valid conclusions. 7. Capable of working closely with RD&E, Manufacturing and Operations regarding active product quality planning (APQP) through the use of quality control plans and product & process FMEA tools.
 
Job Number: 7596
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineers - New Orleans, LA

Description:
STS AeroStaff Services is hiring Product Engineers for open positions in New Orleans, Louisiana.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

A Product Engineer (contract/temp) has knowledge of design, tooling, and manufacturing processes to take an existing build package and make it more efficient to construct in Manufacturing. This position supports Production by providing on-site assistance/guidance and timely response to all identified design/production interface problems or issues. The expectation is that this position will spend a large portion of their time on the production floor working to improve our manufacturing efficiency.

Job Duties:

• Improve the manufacturability of the craft by reducing complexity, reducing touch labor hours, reducing materials (# of parts) and improve the manufacturing methods
• Evaluates, recommends, and implements major tooling requirements, facilities planning/improvements and plant automation
• Work closely with the Production, Production Supervision, Manufacturing Engineering, Production Control and Engineering groups
• Obtain documentation to resolve problems due to Engineering documentation being incomplete, incorrect or conflicting
• Attend Production meetings as Manufacturing Engineering representative, as required
• Serve as interface between Production and both Manufacturing Engineering and Design Engineering
• Correct Engineering documentation discrepancies that are in conflict with existing construction and ensure that corrections are transmitted to Engineering for incorporation into documentation
• Research and evaluate potential design problems prior to construction start and/or during construction
• Prepare report of findings and recommendations for Production Department
• Evaluate long range facilities, machine tool, and special tooling require­ments; report on these findings and assist in establishing long term Production facilities plans.
• Keep management fully informed of all significant issues which could impact the manufacturing process, during both product design and manufacturing phases
• Implement major tooling procurement and installation and facilities improvements
• Performs other job related duties as assigned by management

Qualifications:

• Bachelors of Science degree in Engineering - Manufacturing or Industrial Engineering preferred
• Five (5) plus years’ of Manufacturing/Industrial Engineering experience developing plant layout, tooling fixtures and manufacturing processes using DFMA tools
• Technical knowledge balanced with creative ability and a hands-on approach
• Visual and spatial awareness
• Computer literacy including three-dimensional conceptual ability and CAD (computer-aided design)
• SolidWorks experience/knowledge is a plus
• Knowledge of industrial processes, techniques and standards
• Self-starter; able to undertake work initiatives with minimal supervision
• Excellent communication skills, both written and oral presentations
• Demonstrated attention to details and multi-task skills
• Demonstrated experience with tooling design for fixtures to construct close tolerance aircraft/marine aluminum structures
• Familiarity with lightweight aircraft/shipboard construction and systems
• Ability to meet deadlines while “managing” mini projects
• A willingness to build and maintain positive working relationships and to share information with others
• Determination to achieve an end result and meet deadlines

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39475
Job Location: New Orleans, LA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Program Manager
Full Time Position
Greensboro, NC

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

Description
 
General Summary:
 
We are searching for Program Managers to organize and lead projects across all phases of an aircraft component/system’s Product Lifecycle. This includes the planning, organization, and coordination of project activities with internal functional and external supplier organizations.  The individual will have the responsibility to ensure that project requirements (specifications, resources, schedule, and deliverables) are properly defined and managed through successful completion.  Prior aerospace engineering, project management, and value stream experience is preferred.  
 
Duties and Responsibilities:
 
Product Life Cycle Management
Serve as project manager for assigned components/subsystems throughout product life cycle (development, qualification/certification, production, etc).
Collaborate with functional organization leaders to develop resource plans, schedules, and deliverable milestones.
Facilitate internal data exchange, communication, and collaboration required to ensure timely completion and transition between product phases.
Conduct resource, capacity and capability analyses to ensure project plans and/or production introduction milestones are achieved.
Oversee the implementation of product/process improvement initiatives.
Supplier Management
Facilitate the development of request for proposal packages and associated documentation (i.e Statement of Work, Technical Specification).
Contribute to supplier evaluation, selection and contract negotiation activities.
Manage supplier product development and qualification activities to ensure technical, cost, schedule and deliverable requirements are achieved.
Organize and lead cross functional project status, design, and manufacturing/quality assessment reviews.
Develop and oversee supplier resolution/recovery plans to mitigate component qualification, certification, and production delivery risks. 
Project Management
Develop and present project proposals for Senior Management review/approval.
Perform business case analyses required to facilitate program investment decisions (i.e. Project funding, capital investments, and product changes).
Utilize leadership skills and structured methods to lead problem solving initiatives.
Actively monitor project performance and perform change management.
Provide regular communication of project status, risks, critical issues, and associated plans to stakeholders (i.e Senior Management, Suppliers, etc.).
 
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
Certified Project Management Professional (PMP) - Preferred
Bachelor's degree in Engineering
2-5 years Project Management experience 
Knowledge, Skills and Abilities:
Demonstrated ability to lead complex projects in one or more areas of a Product’s Life Cycle (i.e. development, certification, production, and customer service).
Experienced in leading Integrated Product Teams through successful resolution of technical, quality, business and/or customer oriented issues.
Possess an understanding of Project Management processes and procedures.
Ability to effectively communicate (verbal/ written) and present information to a broad audience, including mid-to-senior level management.
Working knowledge of aerospace component manufacturing methods, assembly processes, and tooling design philosophies.
Familiarity with production planning, supply chain, and quality management tools/systems – SAP experience preferred.
Knowledge of Component Qualification and Aircraft Certification processes (ex. 14 CFR 21/23/25 AND/OR 33).
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, CA
Rate: "open"
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Proposal Estimator

Description:
The Proposal Estimating Integrator is a direct report to the Programs Estimating Manager within the company Pricing and Estimating organization, supporting Defense Systems and Services (DSS) United States Government (USG) and International Business Offices, to include Development Programs.
The selected candidate will be responsible for estimating Program Control and Aftermarket labor and material costs utilized in company proposals.

o The candidate will prepare high quality estimates for USG and International proposals, provide the support rationale as to the basis of the estimates, as well as the certification of the estimates to be current, accurate, and complete on USG proposals.
o Understand and respond to customer requirements appearing on Requests for Proposals (RFP's) and attend proposal strategy and kick-off meetings, and other meetings as necessary to resolve problems.
o Coordinate and schedule the responses of Subject Matter Experts from affected internal departments ensuring that estimates are compliant to the clients, customer's requirements, particularly the Defense Federal Acquisition Regulation Supplement (DFARS) for USG proposals.
o Create proposal estimating documents and ensure that they are reviewed and approved in accordance with internal procedures.
o Support the acquire business process which will enable the company to continue growth in both revenue and profitability
o The selected candidate will work many aircraft proposals including internal mega proposals such as VXX, CRH and Multi-Year IX. Proposals will be sole source or competitive bids and non-offers, can vary in size and complexity, and range in type to include but not limited to aftermarket products and services, support of engineering services, trade studies, engineering change proposals (ECP), aircraft product improvements, major aircraft modifications and aircraft proposals.
o The candidate will be engaged in efforts to continuously improve the company's proposal estimating processes and will participate in improvement initiatives utilizing Achieving Competitive Excellence (ACE) tools.

The position provides the opportunity for direct interaction with U.S. Government customers and internally with numerous functional departments. Work is to be performed in the Stratford, CT facility.
 
Job Number: CT 39047
Job Location: Stratford, CT
Rate: Great $$$
Per Diem: yes
Overtime: possible
Duration: 12mos
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 1st Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems.

Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.

In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:

We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519366NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 2nd Shift - NC

Description:
Uses pre-determined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend. They would need to have prior Aircraft inspection experience and preferably have composite experience also.
 
Job Number: FD-519654NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - 3rd Shift - NC

Description:
Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electro-mechanical assemblies or mechanical units, sub-assemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices.

Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.

Performs line clearances after each lot to ensure all materials from the previous lot have been removed.

The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:

1. Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs and test procedures, perform any inspection of parts and assemblies including processes and materials.
2. Dimensionally inspect parts or assemblies.
3. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures.
4. Inspect vendor, subcontractor or company parts and assemblies.
5. Follows a pre-determined sequence of own work.
6. Prepare and maintain Quality records.
7. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported.
In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Client leadership.

Training and certification will be provided for the additional work when required.

Qualifying Skills
1. Possess the skills and knowledge to perform in one or more of the following areas.
Assembly Inspector
Fabrication Inspector
Shipping/Receiving Inspector
2. Use and interpret drawings, inspection manuals and specifications, shop mathematics, precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
3. Contact other company organizations, or customer representatives, as required to coordinate and accomplish work assignments.
4. Operate testing machines, calculate and record results.
5. Maintain certifications as required.
6. Plan own sequence of operations.
7. Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.
8. Verify that tools are qualified.

Candidate must be flexible on shift and hours required to work.

Requirements:
Note from Hiring Manager:
We are currently working 7 day a week, first shift 7:00 Am to 3:30 PM, second shift 3:00 PM to 11:30 PM and third shift 11:00 PM to 7:30 AM.

The weekends would be rotated so they would not be working every weekend, most likely every other weekend.

They would need to have prior Aircraft Inspection experience and preferably have composite experience also.
 
Job Number: FD-519656NC
Job Location: Kinston, NC
Rate: $24.00/HR
Per Diem: Yes Possible
Overtime: Yes
Duration: 3-4 Months or Longer
Start Date: 07/07/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RS Airworthiness Inspector

Description:
RS Airworthiness Inspector

Location: Long Beach, CA
Pay Rate: DOE ($32.05/hr - $35.61/hr)
Duration: Long Term Contract
Shift: First

Unique Skills:
-Airframe and Powerplant License required.
-Proficient in utilization of Measuring devices, Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC procedures.

Education and Experience Requirements:
-High School graduate/GED.
-Airframe and Powerplant License required.
-Four (4) years aircraft experience on large/mid-size aircraft.
-Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities/Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills. Must be able to prioritize tasks.
2. Strong computer skills.
3. Must be able to work all shifts.
4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 7539
Job Location: Long Beach, CA
Rate: 32.05 - 35.61
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RS Airworthiness Inspector

Description:
RS Airworthiness Inspector - 2nd Shift

Location: Long Beach, CA
Pay Rate: DOE ($32.05/hr - $35.61/hr)
Duration: Long Term Contract
Shift: Second Shift, 4x10 Schedule

Unique Skills:
Able to work four ten hour days plus overtime as required

Education and Experience Requirements:
-High School graduate/GED.
-Airframe and Powerplant License required.
-Four (4) years aircraft experience on large/mid-size aircraft.
-Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
-Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures.

Position Purpose:
The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities/Essential Functions:
1. Responsible for all Quality Control inspections on aircraft/components in the Repair Station.
2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
3. Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting.
4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
7. Ensures aircraft/components are airworthy prior to any flight activities.
8. Mentors technicians on effective documentation.

Additional Functions:
1. Communicates with management as required to identify work assignments and delivery schedules.
2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
3. Completes FAA required conformity inspections and complies certification data for presentation to the FAA for approval.
4. In support of aircraft certification and final phase testing, may include flight tests on aircraft.
5. Performs other duties as required.

Other Requirements:
1. Strong written and verbal communication skills. Must be able to prioritize tasks.
2. Strong computer skills.
3. Must be able to work all shifts.
4. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.
 
Job Number: 7532
Job Location: Long Beach, CA
Rate: 32.05 - 35.61
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Test and Simulation Engineer

Description:
Real-time Test and Simulation Engineer
Greensboro, NC
Full Time Position

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential

 
 
 
General Summary: 
 
The Engineer, Real-time Test and Simulation position is responsible for developing, testing and enhancing aircraft integration software and hardware and supporting the tool and process associated with Real-time Test and Simulation Systems (RTSS).
 
Duties and Responsibilities:
Develops and enhances hardware and software in the Advanced Systems Integration Test Facility (ASITF) for current and future programs.
Develops simulation software, user interfaces and associated documentation to support testing.
Develops and enhance automated regression and Safety of Flight tests for various systems groups.
Creates real-time prototypes of advanced aircraft systems and develop capabilities and facilities in support of advanced research projects.
Develops Model Based Development (MBD) processes and environments for real-time advanced prototyping with a long term objective of leading to a production capable MBD software development.
Assists in the configuration management and control of the facility’s hardware and software systems.
Assists system test engineers as required with their test development and during their testing.
Mentors other engineers on real-time test and simulation.
Defines and improves Systems Engineering Processes (SEP) associated with systems integration testing and advanced Model Based Development (MBD).
Reviews systems requirements, ICDs, electrical drawings, test plans, system safety documentation, and system performance analysis.
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Aerospace, Electrical, Software Engineering, or other related field required.
5+ years of direct engineering experience in actual development programs, including requirements development, design, integration, testing and system troubleshooting experience.
Previous experience in HIL (hardware-in-the-loop) simulation and test automation.
Previous experience within the aviation/aerospace industry.
Knowledge, Skills and Abilities:
Working knowledge of FAA & EASA certification requirements, including airworthiness and operational requirements.
Working knowledge of Mathworks MATLAB/Simulink.
Working knowledge and familiarity with dSPACE or other real-time testing / test automation platforms.
Working knowledge with scripting languages such as Python and JavaScript is preferred.
Previous experience with HTML is preferred.
Previous experience with SCADE (display and controls) tool set highly preferred.
Strong analytical skills required.
Previous experience with tools for Requirement Management, Defect Tracking, Configuration Control and Version Control.
Proficiency with DOORS and PLM tool (TeamCenter, etc.) preferred.
Ability to communicate effectively (written and oral) through all levels within the company.
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: open
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Planning and Scheduling Specialist

Description:
Looking for a master-level Aircraft Production Scheduler to develop and maintain aircraft maintenance and modification schedules. This position is the Lead Integrator for the Master Production Schedule (MPS) on Executive Transport Services and Support located in San Antonio, Texas. This position has primary responsibility for the Program Master Production Schedule and will serve as the technical lead for the IP&S team in developing, integrating and maintaining the MPS and supporting detail schedules. This position will work closely with the IP&S team and program leadership to ensure alignment and integration of the MPS with other key program plans and schedules such as the Integrated Master Schedule (IMS), Master Phasing Plan, High Level Flow (HLF) and detailed schedules below the IMS.
• Leads the preparation, development and integration of highly complex Master Production Schedules including supporting elements such as facilities, tooling, parts fabrication, parts procurements, and assembly, modification, maintenance, integration & test and flight operations in order to meet all business offers, project or program execution objectives.
• Performs high-level capability and capacity visibility of key resources. Formulates comprehensive recommendations and presents summary to Program and Executive Leadership.
• Coordinates status for the Master Production Schedule as well as supports risk analysis for projects, programs and change activities
• Performs what-if analyses to determine impacts, constraints and plans involving product development, production rates, process improvement, or program initiatives.
• Performs integration of the Master Production Schedules, horizontally and vertically with the Program Master Schedule, to include Site and Supplier information.
• Works with key stakeholders to develop recovery plans, while ensuring Program schedule baseline control.
• Facilitates oversight & implementation for change requirements while ensuring commitment of stakeholders while maintaining disciplined revision control of all schedule baselines. Facilitates multidisciplinary review of proposed Production schedule changes to the baseline. Negotiates and resolves issues. Advises and recommends integrated scheduling, change and baseline management best practices, processes, techniques and tools to management.
• Develops and posts scheduling and change related metrics & reports.
• Provides high level analysis of product development initiatives for Production.
• Oversees program planning requests for the development of new and derivative products.
• Develops strategic plans for realigning work statement to support production schedules while meeting company goals for inventory management.
• Provides recommendations to Program Operations / Program leadership in regards to integrated Master Production Scheduling related issues.
• Provides coaching, mentoring and leadership to lower level employees. Provides subject matter expertise in the development, implementation and training of processes and tools.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
Category Name Required Level
Areas of Expertise MS Project Yes Intermediate
Areas of Expertise Production Yes Advanced
Areas of Expertise Project Scheduling Yes Intermediate

Bachelor's degree and typically 15 or more years' related work experience, a Master's degree and typically 13 or more years' related work experience or an equivalent combination of education and experience. 10% maximum travel between San Antonio and Oklahoma City.

Must be US Person for purposes of Export Compliance.
 
Job Number: 38652
Job Location: TX
Rate: 44/hr
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer and Tester

Description:
Design and test of ground-based aircraft maintenance systems software Systems and software design, requirements management, systems specifications, validation and verification testing, and documentation for system and software requirements in a laboratory or desktop simulation environment.

Perform formal software development through design for requirements using various programming languages, libraries and file formats, programming tools, and CM tools
Conduct software integration and systems testing on target hardware in a lab environment.

Develop, implement, document, and review software cases and expected results
Qualifications

Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred.

· Master’s Degree in the Computer Science disciplines mentioned above is preferred.

· IT Level II certification with Security +, Windows 7/10 operating systems, and Windows Server 2012/2016 is preferred.

· Must be able to pass and obtain a USG Background Investigation and Common Access Card (CAC)

· Must be knowledge concerning - and have experience with - with multiple primary development environments.

· Programming languages, libraries and file formats include Java, HTML5, Javascript, JQuery, Restful web services, CSS, JSF, SQL (database) XML (including Xpath/Xquery), SVG (Graphics/Plotting/…), and HTTP

· Programming tools include Tomcat (Web Server), PostGreSql (Database), Eclipse (Development Environment) Squirrel (Database) Ant (Build Tool)

· Configuration Management tools include SVN, Dimensions/PVCS, BugZilla
 
Job Number: 100005
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / no clearance / ASP.NET with C#, ASP, JavaScript, Html and CSS is required / Web Developer URGENT URGENT UT

Description:
159893
Requirement# AERO-REQ-0611
Work location Odgen, UT
Work Week 9/80-A
Priority High
Needed Date 08/01/2017
End Date 10/31/2018
Number of Resources 1
Security Clearance No Clearance


Software Engineer
Description
Software engineer will be located at Hill AFB, Utah with responsibility to develop, maintain and support software tools and websites for the Air Force, Army, and Navy. Tools include, but are not limited to, the F-16 Organic Change Management (OCM) system, Automated Weight and Balance System (AWBS) download website, and client-side Weight and Balance software. OCM is a web system used to automate processes and provide configuration management support for the F-16. AWBS is a common tool throughout the Department of Defense. It tracks aircraft weight and center-of-gravity in order to provide information and generate flight clearance forms. Process automation is exciting and challenging because of the ability to streamline processes and the opportunity to leverage the latest technologies to simplify each task. As technologies develop, they are evaluated and employed by the software team to keep our tools on the leading edge of technology. Involvement in all phases of software development is required, i.e., development of software requirements and design documents, project plans, software coding, software testing, and training customers on the use of the product.

Skill/Experience/Education

Mandatory:

In-depth knowledge and experience in web development, specifically using ASP.NET with C#, ASP, JavaScript, Html and CSS is required. Skilled with Microsoft Visual Studio and C# development. Strong organization, written, oral, and presentation skills required.

Desired:

Proficient in using Microsoft Visual Studio and Microsoft SQL Server.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Web Developer Web Developer utilizing ASP.NET with C# 6-8 Years Yes
ASP.NET with C# 4-5 Years Yes
Microsoft Visual Studio 4-5 Years Yes

Interview Required Yes

Shift 1st Shift
OT Allowed No
Travel Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0611
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 15 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II/III - (OK)

Description:
US CITIZEN ONLY. SECRET CLEARANCE NOT REQUIRED TO START.

We are seeking a highly qualified Software Engineer to support the Avionics Software product development activities throughout the aircraft modification
lifecycle. The Aircraft Platform Software Team is responsible for the software architecture and design modifications of the following system components:
- Flight Management
- Navigation
- Test Modes, Monitoring and Reporting
- Mission Management
- Operator Controls and Displays
- Sensor Management
- Communication Systems
- Weapon Management

Responsibilities for this position include working with an engineering team to develop software products through all phases (requirements, design, development, and integration/test).

Experience with Rationale DOORs, Clearcase, and Clearquest
- Experience with the software estimating process
- Experience with export controls
- Minimum of 5+ years working on large complex development system/activities
- Experience in technical leadership of complex Software Architectures
- Experience with DO-178B assurance levels and/or Agile Software methods
- Experience with Ada, C, C++, and C# and scripting programming languages
- Experience with Unix and Linux Operating Systems
- Experience with Real-Time POSIX Operating Systems (VxWorks, Integrity, etc.)

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: SWOK
Job Location: Tinnker AFB, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO) - INTERIM SECRET

Description:
INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Aircraft Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWIIIMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Real Time

Description:
Looking for Software Engineers with the following background:
Experience with Ada, C, C++, and C# and scripting programming languages
Experience with Unix and Linux Operating Systems
Experience with Rationale DOORs, Clearcase, and Clearquest
Software Engineer to support the Avionics Software product development activities throughout the aircraft modification

Email resumes to: mmccarthy@pdstech.com

*Must be able to obtain secret clearance
Degreed & 5+ years experience
 
Job Number: Bo-Soft-OK
Job Location: Tanker AFB, OK
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionic-Mechanical Design Engineer

Description:
TOOLS
Inventor (3D Modeling)

INTAKE NOTES
Looking for Avio Mechanical Design Engineer with heavy mechanical experience and some electrical exposure. Familiar with 3D modeling using Inventor or Solidworks, Catia is ok (not preferred). Must have aircraft hardware experience such as; honeycomb panels, potted inserts (screw into panel), sheet metal design, understanding of aircraft separation design/requirements. We basically need a CAD jockey for 6 months.


JOB DESCRIPTION
Responsible for the design and oversight of the wire installation, operation and maintenance of electrical components, equipment and systems.
· Develops and maintains aircraft electrical equipment installations, concepts and designs.
· Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
· Supports installation of electrical systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
· Prepares and analyzes electrical system layouts and performs design reviews.
· Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
· Designs the installation of electrical components, equipment and systems with maintenance and operational functionality in mind.
· Utilizes 3D CAD (Inventor) installations of electrical components to meet requirements.
· Bachelor's degree (B.S.) in Aerospace or Electrical engineering desired, minimum of five years relevant aerospace experience or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.
· Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

IN-DEPTH KNOWLEDGE, SKILLS, AND ABILITIES FOR THIS ROLE INCLUDE:
· Proven proficiency in 3D Inventor for design and development of aircraft wire routing drawings for shipside and monuments to latest FAA design standards to meet customer requirements.
· Understands wire schematics, system block diagrams and topologies.
· Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
· Strong working knowledge of My Boeing Fleet for OEM data sets.
· Thorough knowledge of equipment installation.
· Understanding of the certification and electrical design process.
· Ability to trouble-shoot electrical systems.
· Competent user of CAD and data management systems.
· Must be able to provide layouts and program design reviews.
 
Job Number: 17-744
Job Location: Northwest
Rate: Open
Per Diem: SPlit
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Systems Design Engineer

Description:
TOOLS
Visual Engineer (V.E.)

INTAKE NOTES
We need an electrical systems engineer with VE background to hit the ground running. Engineer will design wire diagrams/schematics for IFE, power supply, and lighting for aircraft interiors retrofit, not OEM. I am not looking for an OEM person.

JOB DESCRIPTION
Creates advanced designs of avionics to include cabin system components, in-flight entertainment, communication systems, LED cabin lighting, AC/DC power systems and products to meet customer criteria, design quality standards, FAA requirements, budget and project schedules.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Defines avionics and electrical system architecture requirements, definition, system and sub-system aircraft integration for VIP/VVIP aircraft platforms.
• Develops aircraft integration design solutions utilizing engineering drafting tools for avionics and electrical aircraft interiors, system components and support aircraft installations and testing.
• Interfaces with engineering leads to resolve design issues, captures changes and closes out designs to meet schedule and budget targets.
• Supports installation of systems via liaison with modification facility, identifies root cause issues, captures redline updates, resolves design issues and updates drawings to meet schedule.
• Develops verification and test procedures, ground and flight test procedures and interfaces with FAA designees to incorporate compliance with the latest FAA design guidance requirements.
• Works directly with equipment vendors to capture requirements and ensures operational interface between systems and sub-systems is maintained and validated.
• Maintains close coordination with project engineers to comply with schedule and cost requirements of programs.
• Participates in the project bid process to capture engineering and design requirements for bid estimates and firm price quotes to customers.
• Interfaces with customers (internal and external) during entire project to ensure designs meet customer criteria.
• Reviews completed drawing packages from peers and approves them for release.
• Prepares design check lists as needed.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Bachelor's degree (B.S.) in aerospace or electrical engineering desired; minimum of eight years relevant aerospace experience; or equivalent combination of education and experience. Aircraft interior and/or VIP retro-fit experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.
REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Must have Visual Engineering (VE) CAD design experience
• Extensive technical knowledge of Boeing aircraft for VIP and/or commercial models.
• Strong working knowledge of My Boeing Fleet for OEM data sets.
• Thorough knowledge of power distribution.
• Thorough understanding of the certification and electrical design process.
• Must be able to provide complex lay-outs and program design studies.
• Ability to work and make decisions independently with limited supervision.
• Ability to successfully interface with customers on projects.
• Competent use of CAD and data management systems.
• Ability to understand and derive multiple customer standard electrical system requirements.
• Ability to work well independently and cross-functionally across multiple organizations.
• Strong communication, time-management, and problem-solving skills.
 
Job Number: 17-745
Job Location: Northwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer VI

Description:
Position Summary: Directly support the F/A-18 & EA-18G Fleet Support Team (FST) Structures Group at Fleet Readiness Center West (FRCW), NAS Lemoore, located at Lemoore, CA. This position is a Structures Engineering Production liaison support on-site at NAS Lemoore.

Essential Duties and Responsibilities:
Provide structural engineering liaison support to all F/A-18 production efforts, fleet repairs and sustainment activities. These include providing complete evaluation of aircraft structural damage (due to cracks, corrosion, thermal damage, etc.), provide engineering repair designs and prepare detailed repair instructions consistent with the engineering strength requirements of the F/A-18 program.
Provide final approval and recommendation on parts substitution, materials substitution, and repair processes including deviations from standard repair requirements and engineering repair dispositions.
Engineering liaison support to include providing technical assistance to production and shop personnel on various courses of action regarding structural components and aircraft repair dispositions.
Serve as the on-site technical consultant representing the F/A-18 FST regarding aircraft repairs, maintenance inspections and repair modifications. Serve as spokesman and representative advisor on specific engineering issues. Interface with the F/A-18 FST engineering, other field teams and Navy Squadrons.

Qualifications & Skills Requirements:
At least ten (10) years of experience in a relevant engineering/science field.
BS or BA degree in a relevant engineering/science field. Proficient in Microsoft Office including Word, Excel, and Access
Current Secret Clearance is required.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.
LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. CATIA V5, NASTRAN, and PATRAN, are desired. Job Description Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-746-107382
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Duration: Long Term contract
Shift: 1st Shift

**Candidate MUST be a U.S. Citizen or Permanent Resident. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project**

Unique Skills:
Airframe Stress Experience should include: static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction in a product development environment, finite element modeling, understanding of certification requirements to FAR Part 25 and EASA CS. CATIA V5, NASTRAN, and PATRAN, are desired.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7595
Job Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
The ideal candidate will have experience in the following: -Use of finite element analysis for both primary and secondary structures -Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations -A working knowledge of FAR part 25 certification requirements -A good understanding of a fast phased completion style environment -Working knowledge of FEMAP is required Job Description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret / NASTRAN PATRAN FEA Catia CA

Description:
159391
AERO-REQ-0540
Title: Structural Analysis Engineer-N
Work Location: Palmdale, CA
Start Date: 6/20/2017
6 month contract
85-95/hr DOE
Active Secret security clearance with an investigation less than 5 years ago


Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.


Mandatory Skills:
Active Secret security clearance with an investigation less than 5 years ago.----Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Experience performing stress analysis by hand calculations--Experience building complex finite element models for stress analyses--Knowledge of aircraft stress analysis methods and basic structural design criteria--Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


Desired Skills:
Proficiency with SLIM/TMP VIsion, Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows and LINUX/UNIX operating systems, and computer programming experience in FORTRAN, VBA, C/C++ and PERL.
 
Job Number: JE-0540
Job Location: Palmdale, CA
Rate: 85-95/hr DOE
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Special Missions

Description:
Structural Design Engineer - Special Missions

Location: Savannah, GA
Pay Rate: $60/hr - $63/hr
Duration: Long Term Contract
Shift: First
**Must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership.
-The group is involved with the current Company fleet and new product development.
-This job is for placement in the Core team working on the Special Missions aircraft.

Qualifications:
- Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
- Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in CATIA v4
- Proficiency in SmarTeam PLM database
- Experience with green aircraft structural modification
- Prior work experience with Company aircraft design
- Experience with knowledge management processes

Responsibilities
- Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track and manage design projects of various magnitudes using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7443
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineering Contractor - Special Missions

Description:
UNIQUE SKILLS
The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership. The group is involved with the current client fleet and new product development. This job is for placement in the Core team working on the Special Missions aircraft. Open to US citizens or permanent residents. Qualified candidates will have: - Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies - Minimum 10,000 hours or 5 years’ experience on CATIA v5 in primary Structural Design Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in CATIA v4 - Proficiency in SmarTeam PLM database - Experience with green aircraft structural modification - Prior work experience with client aircraft design - Experience with knowledge management processes Responsibilities include: - Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design - Engage various engineering, manufacturing and product support teams to complete designs - Participate in design reviews - Interact with suppliers and prepare technical coordination memos - Prepare engineering reports - Document, track and manage design projects of various magnitude using online knowledgebases and tracking tools - Provide technical leadership and mentoring to junior engineers

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-754-103243
Job Location: Southeast
Rate: $60.00 to $63.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer

Description:
Structural Designer has thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies - Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in CATIA v4 - Proficiency in SmarTeam PLM database - Experience with green aircraft structural modification - Prior work experience with aircraft design. Bachelor’s Degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Test Engineer

Description:
Structural Test Engineer
Greensboro, NC
Full Time Position

General Summary:
 
The Engineer will perform activities associated with all areas of structural test, including but not limited to static, fatigue and dynamic test environments. Engineer will support a wide range of test projects, which will include small component test and large full scale assemblies.
 
Duties and Responsibilities:
 
Review Test Plans/Requirements and Coordinate with Stress Engineering, Systems Engineering, Purchasing, and Quality to prepare and ensure implementation of requirements for testing activities on various static and fatigue tests
Experience working with instrumentation sensors such as, Strain Gages, Load Cells, Pressure Sensors, Thermocouples, Extensometers and Displacement Transducers
Operate, maintain and support use of digital and analog data acquisition systems
Participate in Full scale aircraft test design concepts
Inspect 3D models and create documents for test setup
Assist with witnessing and conducting tests.
Supervise conformity effort for tests.  This includes creation and implementation of conformity documentation for testing - RFC's, work orders, test deviations, and resolution of squawks
Troubleshoot and resolve test setup issues and report out on status for assigned tests
Perform analysis for adequately size test hardware and write test reports
Create and implement solutions for conducting testing including fixture design and fabrication, and lead a group of technicians and peers for accomplishing tasks
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
 
·       Mechanical, Aerospace, or related Engineering Bachelor Degree with 10+ years of relevant test experience supporting aircraft structures

Knowledge, Skills and Abilities:
 
CATIA V5, Microsoft Office, and Communication Skills
 
Job Details
City
Greensboro
State
North Carolina
The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: Full Time
Duration: Full Time
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Weekend Flight Test

Description:
UNIQUE SKILLS
Bachelor’s degree in aerospace or mechanical engineering. - Minimum 10 yrs. dedicated structures MRB Engineering experience at a recognized airframe manufacturer. - Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage). - Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, and Excel).
 
Job Number: 17-750-105661
Job Location: Southeast
Rate: $62.00 to $68.00/per Hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Weekend Flight Test

Description:
Structures MRB Engineer - Weekend Flight Test

Location: Savannah, GA
Rate: $62.00 - $68.00/HR
Duration: Long Term contract
Shift: Weekend 1st Shift


Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
- Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 7521
Job Location: Savannah, GA
Rate: $62.00 - $68.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer/Flight Test

Description:
Note: This is a Weekend shift

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 10 yrs dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in an aircraft Production, Flight Test and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in schedule driven environment.
- Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Solumina, Word, Excel).
 
Job Number: 24-186
Job Location: Savannah, GA
Rate: $62.00 to $68.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Subsystems Engineer-1553 interfaces in Owego, NY #1474AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Systems Engineer
Job Number: 1474
Location: Owego, Ny
Compensation: DOE
Assignment Length: 9 month contract
Active Secret clearance required

Job Description:

Activities and responsibilities will include interfacing with multiple engineering disciplines (hardware, software and specialty engineering including reliability, safety and human factors) as well as equipment suppliers, in order to support the development of requirement specifications and other design artifacts/activities for the successful integration of avionics subsystems onto fixed and/or rotary wing aircraft platforms. Our most current needs are for team members experienced with designing, integrating and testing software centric systems. Areas of focus may include items such as weapons, datalinks, Ethernet networking, computing systems, communication systems, navigation systems, video encoding, 1553 interfaces, radar, digital stores management system, scripting and debugging, troubleshooting and working closely with the software development team.

Skill/Experience/Education

Avionics Systems engineering experience, preferably working military programs Experience with requirements development, system design, problem analysis and resolution, and/or integration and test The ability to work effectively in a team environment Strong verbal and written communication skills Previous Systems Engineering experience across the entire program life cycle within military aircraft / avionics architectures and associated off-board support systems

Desired:

Demonstrated technical leadership; ability to communicate on all levels with internal and external customers/excellent presentation and customer interaction skills Familiarity or experience with agile development Experience using DOORS Experience with modeling and simulation

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Systems Engineering Military Avionics 4-5 Years Yes
Requirements Experience with requirements development and decomposition 4-5 Years No
 
Job Number: 1474AS
Job Location: Owego, NY
Rate: 65/hr W2
Per Diem: N/A
Duration: 9 Months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Procurement - Level 3 (KS)

Description:
Conducts, manages and maintains synchronization of a supply chain for obtaining goods and services for the company. Interfaces with internal and external customers and suppliers. Acts as an authorized agent of the company with responsibility for managing all supplier-related activities and authority to commit company resources through contracts and agreements. Manages inventory levels, simulation, modeling forecasting data, and supplier performance. Monitors customer inventory demand and material assets to optimize total supply chain planning. Incorporates planning decisions from customers and suppliers to reduce material and product variability, and arrive at optimal solutions. Develops requests for quotations and proposals, analyzes supplier responses, negotiates and awards contracts, and manages post award supplier activities. Interfaces with internal and external customers and suppliers. Ability to analyze internal and external systems that create demand for products to validate requirements (e.g., customer inventory demand, supplier parts availability and material assets that are on hand or in transit) and to determine the proper course of action (e.g., release orders/maintain schedules against existing contracts to internal and external suppliers for procured items) to satisfy requirements. Apply knowledge of suppler management and procurement process in development and execution of contracts/agreements for obtaining goods and services. Knowledge of industry standards, supplier capabilities, product configuration, manufacturing processes, and governmental regulations relating to procurement.

Requirements:
Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Bachelor's Degree is REQUIRED

First Shift
Extensive SAP experience
Extensive Procurement/Buying knowledge and experience is required

Aircraft background required

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-528514KS
Job Location: Wichita, KS
Rate: $40.00/HR BOE
Per Diem: No - Local Talent Only
Overtime: Possible
Duration: 6 Months
Start Date: 07/28/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Activities and responsibilities will include interfacing with multiple engineering disciplines (hardware, software and specialty engineering including reliability, safety and human factors) as well as equipment suppliers, in order to support the development of requirement specifications and other design artifacts/activities for the successful integration of avionics subsystems onto fixed and/or rotary wing aircraft platforms. Our most current needs are for team members experienced with designing, integrating and testing software centric systems. Areas of focus may include items such as weapons, datalinks, Ethernet networking, computing systems, communication systems, navigation systems, video encoding, 1553 interfaces, radar, digital stores management system, scripting and debugging, troubleshooting and working closely with the software development team.

Mandatory:
Avionics Systems engineering experience, preferably working military programs Experience with requirements development, system design, problem analysis and resolution, and/or integration and test. The ability to work effectively in a team environment. Strong verbal and written communication skills. Previous Systems Engineering experience across the entire program life cycle within military aircraft/avionics architectures and associated off-board support systems
 
Job Location: Owego, NY
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Sr with active secret URGENT URGENT / 10 openings! NY

Description:
160018/1474

Work Location OWEGO, NY
Work Week 9/80-A
Priority High
Needed Date 08/07/2017
End Date 05/07/2018
Number of Resources 10
Security Clearance Active Secret

65/hr max


Title: Systems Engineer Sr

Description

Activities and responsibilities will include interfacing with multiple engineering disciplines (hardware, software and specialty engineering including reliability, safety and human factors) as well as equipment suppliers, in order to support the development of requirement specifications and other design artifacts/activities for the successful integration of avionics subsystems onto fixed and/or rotary wing aircraft platforms. Our most current needs are for team members experienced with designing, integrating and testing software centric systems. Areas of focus may include items such as weapons, datalinks, Ethernet networking, computing systems, communication systems, navigation systems, video encoding, 1553 interfaces, radar, digital stores management system, scripting and debugging, troubleshooting and working closely with the software development team.

Skill/Experience/Education

Mandatory:


Avionics Systems engineering experience, preferably working military programs Experience with requirements development, system design, problem analysis and resolution, and/or integration and test The ability to work effectively in a team environment Strong verbal and written communication skills Previous Systems Engineering experience across the entire program life cycle within military aircraft / avionics architectures and associated off-board support systems

Desired:

Demonstrated technical leadership; ability to communicate on all levels with internal and external customers/excellent presentation and customer interaction skills Familiarity or experience with agile development Experience using DOORS Experience with modeling and simulation

Skill Matrix

Systems Engineering Military Avionics 4-5 Years Yes
Requirements Experience with requirements development and decomposition 4-5 Years No
 
Job Number: JE-1474
Job Location: Owego, NY
Rate: 65/hr max
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Sr.

Description:
Systems Engineer Sr.

Location: Owego, NY
Pay Rate: DOE ($55/hr - $65/hr)
Duration: 9 month contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Activities and responsibilities will include interfacing with multiple engineering disciplines (hardware, software and specialty engineering including reliability, safety and human factors) as well as equipment suppliers, in order to support the development of requirement specifications and other design artifacts/activities for the successful integration of avionics subsystems onto fixed and/or rotary wing aircraft platforms.
-Our most current needs are for team members experienced with designing, integrating and testing software centric systems.
-Areas of focus may include items such as weapons, datalinks, Ethernet networking, computing systems, communication systems, navigation systems, video encoding, 1553 interfaces, radar, digital stores management system, scripting and debugging, troubleshooting and working closely with the software development team.

MANDATORY Skills/Experience/Education
-Avionics Systems engineering experience, preferably working military programs
-Experience with requirements development, system design, problem analysis and resolution, and/or integration and test
-The ability to work effectively in a team environment
-Strong verbal and written communication skills
-Previous Systems Engineering experience across the entire program life cycle within military aircraft / avionics architectures and associated off-board support systems
-Systems Engineering: Military Avionics (4-5 years’ experience required)

Desired:
-Demonstrated technical leadership; ability to communicate on all levels with internal and external customers/excellent presentation and customer interaction skills
-Familiarity or experience with agile development
-Experience using DOORS
-Experience with modeling and simulation
-Requirements: Experience with requirements development and decomposition (4-5 years’ experience)
 
Job Number: 7654
Job Location: Owego, NY
Rate: 55.00-65.00
Per Diem: Split Possible
Overtime: No
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Engineer

Description:
The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.
Essential Functions:
• Manages Installation Design of primary aircraft barrel assemblies.
• Coordinates integration of airframe and system installations.
• Holds planning and review meetings as needed. Manages and reviews schedules.
• Manages the coordination and development of parts, planning, tooling & purchase orders.
• Has oversight over the release of engineering documentation.
• Responsible for interface definition & configuration control of a specific aircraft barrel section.
• Reviews engineering and manufacturing release criteria.
• Defines when sufficient review cycle criteria have been met.
• Conducts risk analysis for remaining tasks.
 
Job Number: 24-180
Job Location: Savannah, GA
Rate: $60.00-$65.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Engineer / CREO systems test electrical mechanical CA

Description:
159749/12904
Title TEMP Engineer
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
$45-50/hr max


Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES:•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Provides documentation and makes technical presentations as required.
•Directs the activities of designers, technicians and may direct the activities of less experienced professional staff.
•May represent the organization in providing solutions to technical issues associated with specific projects.
•Maintains the strict confidentiality of sensitive information.
•Performs other duties as assigned.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices


*Job Qualifications

Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance.
Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables.
Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team.

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications Desired Qualifications:

•Test methods and development of Test environments
•Systems Engineering
•Electrical Engineering
•Mechanical Engineering
•Understanding of SW development and test processes
•Microsoft Office
•Microsoft Visio
•Windchill
•CREO
•KeyCreator
 
Job Number: JE-12904
Job Location: San Diego, CA
Rate: 45-50/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH - Avionics Systems Integration - 10+

Description:
PURPOSE
We are currently seeking an Avionics Engineer for System Integration Test activities.

RESPONSIBILITIES WILL INCLUDE
1. System Integration and Test of new cockpit with legacy components on a Blackhawk platform.
2. Develop engineering test procedures in a DOORs environment and generate reports for test activates.
3. Primary technical responsibilities will be development of detailed test plans and reports of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for S-70i aircraft.

EXPERIENCE/QUALIFICATIONS
• BS in Aeronautical, Electrical Engineering with 6 to 10 years’ Avionics experience.
• Should be familiar with Avionic 1553 bus architecture and test equipment and troubleshooting of system level problems.
• Knowledge of Mil Standards, Digital Busses architecture (ARINC, 1553)
• Previous experience with of Avionics and Electrical Ground Flight Test Activities a plus.
• Working expertise in the design, analysis, development and operation of aircraft systems and avionics sub-systems.
• Knowledge of Test Methods and Lab Procedures

SKILLS REQUIRED
• Strong verbal and written communication skills essential.
• Strong Computer skills: Word, Excel, PowerPoint, Visio, DOORS
• Must be effective working in highly collaborative team environment to accomplish program objectives.
 
Job Number: 17-764-1564
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TH-AVIONICS-Grade 07

Description:
Seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

PRIMARY RESPONSIBILITIES
1. Development of requirements
2. System Integration
3. Generation of lab and aircraft test procedures
4. Troubleshooting avionics issues on test, production and fielded aircraft
5. Support program management reviews

BENEFICIAL EXPERIENCE
- FAA and foreign certification (preferred)
- DO-178B, DO-160 and DO-254 processes (preferred)
- Technical project management (preferred)
- Supplier technical management (preferred)
- Pilot or A&P experience (preferred)

EDUCATIONAL REQUIREMENTS
- BS Engineering in a related field w/7+ years relevant professional experience
- Will consider non-degreed candidates who have equivalent professional experience (11+ years)
 
Job Number: 17-703-1551
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design Certification Eng Contractor - Special Missions

Description:
This position provides technical and project oversight of projects for TC design changes and STCs to Gulf stream's certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - Must be detail oriented and thorough - Strong technical expertise in Special Missions Certification Project STCs is highly desirable - Must demonstrate strong technical writing skills of certification documentation - Must be experienced in establishing Certification project plans and leading projects to closure - Have ability to handle multiple cert projects simultaneously - Be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Qualified Candidates:
- Must be detail oriented and thorough
- Strong technical expertise in Special Missions Certification Project STCs is highly desirable
- Must demonstrate strong technical writing skills of certification documentation
- Must be experienced in establishing Certification project plans and leading projects to closure
- Have ability to handle multiple cert projects simultaneously
- Be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable
 
Job Number: 110261
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design Certification Eng Contractor - Special Missions

Description:
UNIQUE SKILLS
This position provides technical and project oversight of projects for TC design changes and STCs to clients’ stream's certified aircraft. The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities. Qualified Candidates: - Must be detail oriented and thorough - Strong technical expertise in Special Missions Certification Project STCs is highly desirable - Must demonstrate strong technical writing skills of certification documentation - Must be experienced in establishing Certification project plans and leading projects to closure - Have ability to handle multiple cert projects simultaneously - Be a good team player - Certification projects experience in Special Missions projects and STCs is highly desirable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yr. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-774-110261
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design Certification Engineer - Special Missions

Description:
Technical Design Certification Engineer - Special Missions

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position provides technical and project oversight of projects for TC design changes and STCs to Company's certified aircraft.
-The chosen candidate will serve as a liaison between the company and FAA/ODA, engineering focal and other Civil Aviation Authorities.

Qualified Candidates:
- Must be detail oriented and thorough
- Strong technical expertise in Special Missions Certification Project STCs is highly desirable
- Must demonstrate strong technical writing skills of certification documentation
- Must be experienced in establishing Certification project plans and leading projects to closure
- Have ability to handle multiple cert projects simultaneously
- Be a good team player
- Certification projects experience in Special Missions projects and STCs is highly desirable

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7736
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - RPSTL

Description:
RPSTL (Repair Parts & Special Tool List) with Logistics Analyst

5+ years’ experience in technical writing with a background writing for mechanical products
Strong work ethic and positive attitude.
Hands-on experience reading/using Engineering drawings/blueprints.
Provide technical support to client for revision, editing and authoring of technical data pertaining to U.S. Army utility helicopters (UH-60 A/L/M).
Receive and review ECN (Engineering Change Notices) and implement applicable changes to the RPSTL (Repair Parts & Special Tool List).
Collaborate with client and technical representatives to perform author processes to RPSTL data.
Verify provisioning data using the PLISN (Provisioning List Item Sequence Number) for accuracy and provide notification and course of action to correct any issues noted.
Utilize client Aircraft Management System online data base tracking system for management of publications.
Additional tasks may include DOs (Delivery Orders) and PCRs (Publication Change Requests) in addition to ongoing activities that must be accomplished in a timely manner to meet deadlines.
Strong computer skills with a working knowledge of Adobe Acrobat, MS Office applications, desktop publishing systems.
Will consider a Technical Writer with a background in IPB. Experience with military publications is preferred. Familiar with IETM (Interactive Electronic Technical Manuals). Prior experience with XML a plus. 

QUALIFICATIONS

RPSTL writing experience.  Prior experience in military rotor wing publications preferred.

B.A./S., A.A./S., High School Diploma or GED
Must be able to read Engineering Drawings
Familiarity or experience with Parts Databases (PowerLOG or SLIC)
Familiarity with parts indenturing; BOMs (Bill of Materials)
Able to communicate effectively with customers and relay instructions to Illustrators and Provisioners
Familiarity and/or experience with S-1000D, MIL-STD 40051 and MIL-STD-38784 specifications.
Familiarity with XML, Content, IADS4, Adobe apps, Xyvision
Able to work paid overtime
Able to communicate effectively with customers and relay instructions
 
Job Number: 52079
Job Location: Huntsville, AL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Requires experience in Completion manual creation for military or commercial aircraft per final phase technical publications.
-Requires Illustrated Parts Catalog production with emphasis on Completion and post production interiors.
-Additional illustration/graphics skill set a plus.

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.

Position Purpose:
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
5. Perform additional duties as assigned

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team in development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.
 
Job Number: 7628
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr

Description:
Technical Writer Sr.

Location: Savannah, GA
Pay Rate: $34/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data
2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire
3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products
4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process
5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required
6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired
7. Accustom to a fast paced environment able to work overtime as required to meet deadlines
8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired
9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Other Requirements:
1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret blueprint and Engineering Orders.
4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.

Position Purpose:
-Responsible (either individually or with other team members) for the writing of major portions of technical publications.
-Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications.
-Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities/Essential Functions:
1. Write technical publications content as directed.
2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities.
4. Provide input to management on new processes or technology for integration into the technical publications business model.
5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals.
6. Work with management, other departments, and team members in the development of specific project data.
7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers.
8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data.
9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions:
1. Perform additional duties as assigned.
 
Job Number: 7407
Job Location: Savannah, GA
Rate: 34.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr.

Description:
Technical Writer Sr.
Savannah, GA
Rate: $34


Unique Skills:

Experience with Military based manuals. Completions related manuals preferred.


Education and Experience Requirements:

Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Position Purpose:

Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities:

Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.

Additional Functions: 1. Perform additional duties as assigned.

Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance
 
Job Number: 7285
Job Location: Savannah, GA
Rate: $34
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
Technician

Location: Littleton, CO / Waterton, CO
Duration: 5-6 months

Position Description
Performs a variety of duties in the electronic mechanical electromechanical or optical areas. Constructs troubleshoots calibrates adjusts tests and maintains equipment components devices or systems. Works from engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments modifications and replacements as directed; prepares prescribed compounds and solutions

Skills Required
Strong mechanical aptitude and familiarity with the proper usage of mechanics hand tools and power tools

Skills Preferred
Experience in aircraft/aerospace assembly. Past experience working in a aerospace environment. Process equipment (oven) programming/operation Composite material and Process development/fabrication experience. Operate NC mills and routers and manually operate lathes, grinders, saws, and other various shop tools.

Experience Required:
0 - 3 years work experience

Education Required:
HS Diploma or equivalent

Education Preferred:
Aircraft & Powerplant license or similar professional certifications, preferred but not required.
 
Job Location: Littleton, CO / Waterton, CO, CO
Per Diem: yes for one year
Overtime: possible
Duration: 5-6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Diwakar Chaubey
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technologist/Specialist, Compliance

Description:
POSITION DESCRIPTION
Under the guidance of engineering management, works with engineering teams in the execution of projects or segments of engineering programs. Develops compliance requirements, and work plans for engineering personnel for the successful completion of those efforts.

RESPONSIBILITIES
Responsible for reviewing modification sales proposals to determine appropriate Aviation regulatory compliance.
Liaison with avionics systems and structural engineering to resolve certification and approval criteria issues.
Reviews and internally approves project related engineering data to for engineering personnel to assure compliance with department procedures, engineering process specifications, corporate policies, and FAA requirements as required.
Anticipates compliance and technical problems with assigned projects and recommends appropriate action to prevent their occurrence.
Effectively reports to management on key project accomplishments, status and compliance issues. Actively works to improve daily processes. Maintains a current knowledge of technical developments.
Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical compliance issues associated with specific projects.
Coordinate support for foreign certifications, familiarizations, and validations as required.
Must stay current of new and proposed FAA compliance requirements and assist management and quoting to determine the buisness impact.
Perform other job duties as assigned.

POSITION REQUIREMENTS
Associates degree preferred or equivalent engineering experience.
Must have five years’ experience in aviation certification /compliance processes (STC process, Field Approvals, PMA approval, foreign aviation modification approval, DER, DAR, FAA certification office).
Must demonstrate command of Federal Aviation Regulations, Advisory Circulars, Orders, Notices related to MRO alterations and repairs and be able to explain their applications.
Must demonstrate understanding of MRO related FAA/ODA STC process.
Five years’ experience in (Part 25) aviation MRO related leadership position preferred.
Foreign Certification experience desired.

SUPERVISORY
Provides guidance to engineers on design and approval criteria.

COMPETENCIES, PROBLEM SOLVING, IMPACT, LATITUDE Must be capable of providing compliance technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organization objectives.
Exhibits sound and accurate judgement. Supports and explains the reasoning for their decisions and includes the appropriate people in his/her decision making process.
Must be able to handle multiple projects, multiple deadlines and meet aggressive schedules.
Must be able to look ahead, anticipate problems and proactively address issues.
Must have strong organization and planning skills.
Contributes to the completion of specific programs and projects. Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources.
Works under only general direction. Independently determines and develops approach to solutions. Must be able to work either alone or as a team to solve problems.
Excellent verbal and written communication skills, including strong interpersonal skills, team building skills, and the ability to persuade others without creating adversarial relationships.
Must have knowledge of Microsoft products required such as Excel and Word. Knowledge of AutoCad R14 or higher preferred.
Must be able to enter aircraft unassisted, kneel or physically capable perform interior evaluations that include but not limited to removing life raft from aircraft storage location.
The position requires sitting at computer, standing at 30 minute meetings and walking to aircraft on the ramp.
The noise level is usually moderate.
 
Job Number: 17-743-3860
Job Location: Midwest
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool & Fixture Coordinator | Aerospace

Description:
Job Duties & Responsibilities

Primary responsibility is to provide tool and fixture control in support of manufacturing small unmanned aircraft.
Ensure all tooling and items requiring calibration is identified and accounted for in and outside of facility.
Inventory, store, and distribute hand tools.
Order new assembly tools and assembly equipment.
Perform inspection of tools and equipment for wear, defects, or damage.
Coordinate new tooling rollout.
Review all drawings submitted for release or change to ensure completeness and compliance to company specific guidelines and industry best practices.
Liaison to the Property Management group.
Respond to audits on the conformance to established practices for all tools and fixtures, document findings, develop and deploy necessary corrective actions.
Ensure and document all new tooling training has taken place.
Standardize all hand tools.
Responsible for the Manufacturing Engineering tool cage.
Develop methods for tool and fixture control; calibration I/A/W manufacturer's recommendations.
Support QA with calibration of the company's tooling, fixtures and equipment.
Create metrics for the tooling system.
Maintain version control over all tools and fixtures.


Required Qualifications & Background

Min. 3 years’ experience as a manufacturing technician or production technician.
Prior use of assembly and test fixtures.
Ability to read technical drawings.
Strong computer skills is required is required including proficiency in Excel and Word.
Strong analytical skills.
Effective communication skills.
Strong organizational skills with attention to detail and ability to multi-task.
Familiarity with electromechanical manufacturing is desired.
Experience using computerized MRP/ERP systems.
Must be able to work in a small, fast-paced, flexible manufacturing environment as product is being developed.
Take responsibility for all aspects of tool and fixture control.
Must be able to work with minimum supervision.
This position requires you have access to data and technology that is subject to the International Traffic in Arms Regulations (ITAR). Applicants cannot be hired until they are qualified to have such access.
 
Job Number: 359808
Job Location: Monrovia, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Meredith Jacobosb
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Mechanical Systems Design & Analysis Engineer III - MO

Description:
Engineer/Scientist 3 assigned to the Support Systems Mechanical Ground Support Equipment Sub Systems Team. The Mechanical Sub Systems Support Equipment (SE) Team is the team within the Support Equipment and Services organization that is responsible and accountable for defining, proposing, developing, delivering, and supporting high quality, affordable SE required at the Organizational and Intermediate maintenance levels to meet our various customer's needs and requirements. This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft. Candidates will be required to apply their knowledge of engineering principles, aircraft systems, aircrew operations, maintenance procedures, and manufacturing operations to define, support and improve system operability with emphasis on affordability. Successful candidates will be expected to learn quickly and become capable of independent function within the team in short order. Candidates will need to have strong Systems Engineering and Project Management skills. This position is a mix of technical project management and managing/overseeing delivery of Support Equipment end items. Candidates will be expected to have strong oral and written communication skills that will enable them to effectively interact with internal and external customers and suppliers as well as team members from multiple disciplines.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Ability to define, specify, & evaluate mechanical ground support equipment requirements & architectures for adherence to company, customer, quality & regulatory requirements. Ability to create and manage schedules, as well as coordinate installation and delivery of equipment. Ability to translate functional requirements into designs/specifications and ultimately into fielded systems. Proficiency in oral and written communication is required. Must be highly motivated, self-starting and comfortable dealing with diverse people and disciplines. Previous experience in a multi-disciplined team environment, and frequent interaction with suppliers and customers is desired. Experience with mechanical ground support equipment and logistics (technical publications, provisioning, spares, etc) is desired.
 
Job Number: UGMO
Job Location: Hazelwood, MO
Rate: up to $47/hour, DOE
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WF - WPB FLIGHT TEST - Grade 10

Description:
JOB DESCRIPTION
Plan, conduct, manage, and report on Powerplant and related propulsion systems helicopter ground and flight tests. These tests include thermal surveys, fire extinguishing and suppression system evaluations, determination of installed engine power, inlet and exhaust surveys, and characterization of engine-airframe compatibility together with FADEC-based control systems, fuel systems, environmental control systems, and icing / snow evaluations. Test planning involves determining measurement requirements, developing an overall test approach, and defining maneuvers and conditions for which data is to be obtained in order to meet test objectives in a safe and efficient manner. These details are written into published test plans. Test conduct involves coordination with instrumentation and aircraft operations personnel, briefing flight and ground crews, and monitoring tests in real-time using telemetry. Large volumes of flight data are processed and analyzed. Post-test reports documenting the flight test results are developed and presented to the qualifying or certificating authorities.
Possible relocation to Pax River, MD facility.

EXPERIENCE/EDUCATION REQUIRED
Minimum 7+ years’ experience in Flight Test
Minimum Bachelors' of Science in AE or ME
 
Job Number: 17-761-1473
Job Location: WPB, FL
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WP - FLIGHT TEST - Grade 07

Description:
The Deputy Business Manager of Flight Test is responsible for the planning and execution of a flight test program. This includes, but is not limited to the following activities:
1. Development of an overall strategy and plan
2. Development of a detailed flight test schedule
3. Managing/tracking the status with respect to the Integrated Master Schedule milestones
4. Managing/tracking the status with respect to EVMS
5. Providing direction to Aircraft Test Directors to ensure timely completion of priority tasks.
6. Coordinating test program metrics for input for DFC and program management status reporting.
7. Coordinating resources required to accomplish program goals.
8. Assisting in program coordination tasks including scheduling of support facilities and other key assets.
9. Coordinating support requirements with other IPTs and maintaining interface with Sikorsky functional organizations and Government core competencies

REQUIRED EDUCATION & EXPERIENCE
- Candidate must have a degree from an accredited university in a related field
- Master’s Degree w/ 3 years' of professional experience
- Bachelor’s Degree w/ 5 years of professional experience
- Considered career, or journey level.
 
Job Number: 17-763-1548
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing & Engine Anti-ice Design Engineer

Description:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Prepare 3D layout models of the Wing and Engine Anti-ice Systems
• Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems
• Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
• 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years experience
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required
• Knowledge of Aircraft Wing and Engine Anti-ice Systems
 
Job Number: 28-026
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engineer

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Ridley Park, PA, is home to the V-22 Osprey Tiltrotor and the H-47 Chinook Helicopter. These aircraft are designed, tested, and manufactured at the site. In addition, the Ridley Park site hosts an Enterprise Support group which provides design and analysis of structural, mechanical, and electrical systems for Commercial Aircraft and Military Derivatives. There are approximately 5,000 people at the site, more than 250 of them are Electrical Engineers. The plant is situated along the Delaware River approximately 10 miles southwest of Philadelphia, and 2 miles from the international airport.

Engineers considered for this position will develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. >5 Years design experience on an aircraft platform. Skills - Preferred, CEEDS, IPDM Intermediate level. Must be US Person for purposes of Export Compliance.
 
Job Number: 38653
Job Location: PA
Rate: 60/hour
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YE - AIRFRAME DESIGN - Grade 07

Description:
(ADME) Core Services - Supplier Development Lead

PURPOSE OF ROLE
The ADME Core Services Group supplements ADME’s technical expertise with best-in-class project management capability, enabling our functional org to excel in meeting its business objectives. The Supplier Development pillar of Core Services focuses on providing expertise in the development, management, and execution of processes and metrics for ADME’s Integrated Product Teams (IPTs), ensuring the parts and assemblies we design actually get built and delivered according to critical program objectives.

New position on the Combat Search and Rescue Helicopter (CRH) will provide engineering leadership in managing supplier Non Recurring Engineering (NRE) related parts. The position will require an individual with organizational skills bringing leadership and direction to a multi-disciplined team including Supply Management, Operations, Quality, Program Management, and all of our NRE-related Suppliers. The Supplier Development Lead is responsible for coordinating tooling and part fabrication, RFQ/purchase order placement, and part delivery to the aircraft to support the CRH program’s aircraft build and delivery schedule.

JOB DUTIES
1. Providing Engineering oversight and support of the supplier selection process
2. Working with suppliers to develop a schedule that’s achieves program objectives/milestones.
3. Generate and maintain metrics to track RFQ placement and supplier response, negotiations, PR and PO issuance and part delivery
4. Conduct regular briefings to program management, functional engineering and the external customer including presentation of metrics
5. Monitoring and reporting supplier progress for input to the program Integrated Master Schedule (IMS)
6. Preparing Change Requests to detail plan parts as they are put under Purchase Order agreement
7. Allocating part actuals to the Integrated Master Schedule
8. Leading recurring meetings with key suppliers to review progress and resolve issues
9. Work between Engineering POCs and suppliers to respond to questions and help resolve technical issues associated the Statement of Work (SOW)
10. Statusing Earned Value of parts and providing variance analysis/reporting as required
11. Travel to key supplier facilities may be required.

SKILLS AND EXPERIENCE
• Bachelors’ Degree in Engineering or Business is required.
• Team building and communication skills are key to the success of this position.
• Earned value experience, Lean (Six Sigma/ACE) and aerospace experience, with specific knowledge of dynamic components, is preferred.
• Experience with tools including SAP, Primavera, and wInsight is a plus.
 
Job Number: 17-759-1390
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YL - COMPONENT INSTALLATION - Grade 07

Description:
COMPONENT INSTALLATION DESIGNER
The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired.
Assignments in the Component Installation Section require the knowledge of Electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematics, manufacturing practices as well as the ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas, lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
LCA experience preferred.
 
Job Number: 17-762-1536
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Back to Advanced Job Search