Job Search Results

622 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/21 Saturday 05:46PM Pacific Time by ContractJobHunter. )

Listings 1 - 622

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / CATIA V5 / Electrical Wire Harness Installation and Equipment Installation and structural design / aerodynamic analysis / wind tunnel test / Computational Fluid Dynamics CA

Description:
Aeronautical Engineer-N
Palmdale CA
65-75/hr
Active secret

Description
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
Skill/Experience/Education
Mandatory:

Experience with technical background in aerodynamic analysis.- Experience with technical background in wind tunnel test planning and execution.
Must have a Final Secret to start and the ability to obtain a Secret SAR clearance and access. Must be a US Citizen this position is located at a facility that requires special access.
Desired:

Bachelor Degree or Higher in a Technical Engineering Discipline- Computational Fluid Dynamics experience, including mesh generation, CFD solution, and post processing analysis is preferred.- Wind Tunnel Testing experience, and data reduction experience is preferred- Experience with wind tunnel model supplier coordination is preferred.- Experience with wind tunnel test supplier coordination is preferred- Excellent written and oral communication skills is preferred.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CFD Computational Fluid Dynamics 0-3 Years No
 
Job Number: DW-0473
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 9 month contract
Input Date: 06/05/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer

Description:
Associate Engineer
Buffalo, NY
1 year contract


**This is a great opportunity for an ENTRY-LEVEL candidate!**

The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment. Our client's products generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Associate Engineer will operate as part of a design/development team, which includes other Department engineers. The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort. For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level.

To be considered for the position of Associate Engineer, a candidate should have a minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering. To fulfill the demands of design and development of new products the individual must show self starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques. A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable.


Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering.
 
Job Number: 51697
Job Location: Buffalo, NY
Rate: 25.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: 4/17/17
Input Date: 04/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineers - East Aurora, NY

Description:
STS AeroStaff Services is currently hiring Associate Engineers for open positions in East Aurora, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The Associate Engineer will contribute to the analysis, conceptual design, development, and test of complex control hardware used on military, commercial and NASA vehicles and equipment
• The Associate Engineer will operate as part of a design/development team, which includes other Department engineers
• The incumbent may be assisted by drafters, technicians, and others who assist in specific assignments
• In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal
• This phase is critical in that it establishes the basis for future design, and for contract negotiations
• Under the technical direction of the team's lead Engineer, the Associate Engineer will then contribute to the evolution of the conceptual design, technical project planning, detail design, and development testing, using prescribed methods, performing specific portions of the overall program effort
• For training and developmental purposes, the incumbent may receive assignments that include some work that is typically of a higher level

Qualifications:

• This could be a great opportunity for a recent graduate
• Minimum of a BS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering
• Must show self-starting instincts, an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques
• A basic knowledge of closed loop control systems, mechanical hardware design, and good communication skills are also desirable

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38203
Job Location: East Aurora, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/07/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer - Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7314
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/14/2017
Last Updated: 11/10/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineering

Description:
UNIQUE SKILLS
Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Gulfstream ODA requirements. Looking for a seasoned/experienced electrical engineer/designer/integrator with Gulfstream experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

SEE OTHER REQUIREMENTS IN JOB DESCRIPTION
5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-683-100181
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 04/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineering Consultant- Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, Ga
Rate: $61.00 - $68.00/HR
Long Term contract


Unique Skills:
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6991
Job Location: Savannah, GA
Rate: $61-$68
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/27/2017
Last Updated: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 07/18/2017
Last Updated: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineer

Description:
Unique Skills:
Looking for a seasoned/experienced electrical engineer/designer/integrator. The person needs to be proficient in AutoCAD and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Principal Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-168
Job Location: Savannah, GA
Rate: $61-$68/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 11/13/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Bachelor's plus 5 yrs. substantiate years of experience supporting coordination & creation of compliance data in support of FAA/Gulfstream ODA STC/MRA/TC projects. Looking for a seasoned/experienced electrical engineer/designer/integrator with Gulfstream experience on GIV, GV, G450, G550 and if possible G650. Having GII and GIII and MidCabin experience is a bonus. The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.
 
Job Number: 100161
Job Location: Savannah, GA
Rate: 61-68
Per Diem: yes
Overtime: yes
Duration: l-t
Start Date: asap
Input Date: 04/19/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Certification Engineer

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience supporting coordination & creation of compliance data in support of FAA/CompanyODA STC/MRA/TC projects.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7316
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/13/2017
Last Updated: 08/16/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Components Engineer - Level 2

Location: Dallas, TX
Rate: $60.00 - $65.00/HR
1 year contract


** MUST have ability to obtain a Secret security clearance**

Description:
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


Skill/Experience/Education
Mandatory:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.
- Must have parts management experience working with designers to select components for use in designs.
- Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- Must have ability to obtain a Secret security clearance.


Desired:
- Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
- Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
 
Job Number: 7156
Job Location: Dallas, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 03/06/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker ( Independence , Ohio) 8033, Catia, Smarteam

Description:
Design Engineer Checker ( Independence , Ohio) 8033
12 month Contract

Pay Rate - $45 - $55/hour.

Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
o Tolerance stack-up evaluation
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
 
Job Number: 8033
Job Location: Independence, OH
Rate: 50
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 04/17/2017
Last Updated: 04/22/2017
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Checker / Catia V5 / Landing Systems Design OH

Description:
8033
Design Engineer Checker / Catia V5 / Landing Systems Design
Pay Rate - $45 - $55/hour.

Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation. The Design Engineer Checker performs various tasks in checking designs for Engineering at UTAS, including: examining production engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and producibility; and economy of fabrication, assembly, and installation.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements.
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineering checker will check detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
o Tolerance stack-up evaluation
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Compliance
o Ensures compliance to UTAS-LS Engineering methodologies
o Maintains compliance to ITAR and regulatory requirements
o Occasional travel between customer/suppliers and UTAS locations.
• Perform other duties as required

Basic Qualifications Search BS in Mechanical or Aerospace Engineering
• Minimum of 8 years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Working knowledge of materials and surface treatments.
• Strong communication skills
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Demonstrated ability to work with PDM systems (Smarteam, MatrixOne, Teamcenter) system
• Successful candidates must meet all requirements under ITAR & CCGP
• Demonstrated values in alignment with UTAS Four Gears including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
• US citizen, permanent resident alien or able to review all export-controlled technical information.

Preferred Qualifications:
• Demonstrated knowledge of ASME Y14.100 and Y14.41.
• Landing gear experience.
• Knowledge of Root Cause Corrective Action.
• Open minded, pro-active, independent, quick learner with a strong desire to learn.
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
Comments
 
Job Number: DW-8033
Job Location: Independence, OH
Rate: 45-55/hr max
Duration: 12 month contract
Input Date: 05/05/2017
Last Updated: 05/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II/III

Description:
Seeking a Engineering Design 2/3 for an opening in Melbourne, FL.

**Must have active Secret Clearance to start**

RESPONSIBILITIES:
Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.

REQUIRED EXPERIENCE:
Engineering Design 2/3 (1 position)
-Experience in support of aerospace electrical subsystem design or test operations.
-Strong MS Office skills, strong technical writing abilities -Must be willing to relocate to Palmdale in approx. 1-2 years.
-Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired.
-Level 2: 2 Years with Bachelors in Science; 0 Years with Masters -Level 3: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

EDUCATION:
Bachelors in Science

WORK HOURS:
Shift: 1st Shift - 9/80

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 162896
Job Location: Melbourne, FL
Rate: $32-$50
Duration: 9-12 Months
Start Date: ASAP
Input Date: 04/14/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 1 & 2) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers
• Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design

Basic Qualifications:

• Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years
• Level 1: 0 Years’ with Bachelors in Science Mechanical Engineering
• Level 2: 2 Years’ with Bachelors in Science Mechanical Engineering; 0 Years’ with Masters Mechanical Engineering
• Position requires an active DoD Secret clearance

Preferred Qualifications:

• Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38295
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers (Level 2 & 3 - Electrical) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Design Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Duties:

• Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations
• Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost
• Coordinates with other organizations affected by design development
• Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers

Qualifications:

• Experience in support of aerospace electrical subsystem design or test operations
• Strong MS Office skills, strong technical writing abilities
• Must be willing to relocate to Palmdale in approx. 1-2 years
• Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired
• Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• Position requires an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38297
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter 4

Description:
RESPONSIBILITIES:
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.

REQUIRED EXPERIENCE:
AA or other 2 year technical degree in related discipline and 6 years related experience.
Experience with Drawing Releases.
Experience with Product Lifecycle Management.
Experience with TeamCenter.
Preferred Qualifications:
CATIA V5/6.
Experience with NG Products (Triton).

EDUCATION:
AA or other 2 year technical degree in related discipline is required.

HOURS:
9/80 workweek
 
Job Number: 162938
Job Location: Rancho Bernardo, CA
Rate: $30-$40/Hr.
Duration: 6 Months
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMC/EMI TEST ENGINEER - TELECOM / COMMERCIAL

Description:
Johnson Service Group, a leading Engineering Staffing and Consulting company has an immediate opportunity for a talented EMC/EMI Test Engineer. 

Required Experience and Responsibilities:

-2-5+ years of experience in a commercial/telecom EMC laboratory, operating as a Test Engineer.

-Commercial Regulatory standards include GR-1089, FCC part 15, EN300-386, EN55022,EN 55024, EN61000-4-X.

-Hands-on experience with  EMI/EMC related technology and test equipment, such as Spectrum Analyzers, RF Amplifiers, etc..

-Ability to write and execute EMC Control Plans, EMI Test Plans, and generate procedures and reports.     

-Perform testing in accordance with industry standards using recognized applicable instrumentation, including LISNs, antennas, amplifiers and additional RF equipment.

-Record and prepare test data for customer reports, and maintain accurate and timely test logs.

-LabVIEW, or a similar data acquisition system, is pfreferred.  
Coordinate the maintenance and calibration of EMC test equipment.

-Lead test set-ups, and operate/adjust test equipment for EMI/EMC testing.

-Excellent communication, interpersonal and customer service skills.

-Familiarity with Microsoft  Word and Excel. 

Education:  4 year Degree in Electrical Engineering or similar engineering-related field.

Start Date:  ASAP

Duration:   Contract-to-Hire

Location:  Fullerton, CA  

Compensation:   Highly competitive compensation and benefits. 

Citizenship:  U.S. Citizen or Permanent Resident (legally able to work in the United States) is required
 
Job Location: Fullerton, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months+
Start Date: ASAP
Input Date: 04/18/2017
Last Updated: 05/04/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Jay Kerrigan
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMC/EMI TEST TECHNICIANS - AEROSPACE / DEFENSE / COMMERCIAL / FCC

Description:
Johnson Service Group, a leading Engineering Staffing and Consulting company has an immediate  opportunity for talented EMC/EMI Test Technicians. 

Required Experience and Responsibilities:

-2-4 years+ of experience in test set up and execution of  EMC/EMI testing.

-Understanding of EMI/EMC related technology and equipment including Spectrum Analyzers, RF Amplifiers.

-Ability to execute EMC Control Plans, EMI Test Plans, procedures and reports.     

-Familiarity with seismic and EMI/RF testing is a plus.

-Experience with MIL Std-461, or DO-160, and/or Commercial FCC standards.

-Experience with LabVIEW, or another data acquisition system, is a plus.  

-Will provide EMC/EMI testing and compliance services to clients.

-Coordinate the maintenance and calibration of EMC test equipment.

-Maintain a high degree of knowledge of regulatory standards and testing procedures.

-Will contribute to test set-ups, and operate/adjust test equipment for EMI/EMC testing.

-Excellent communication, interpersonal and customer service skills.

-Ability to function well in a team environment.

-Familiarity with Microsoft Office Suite

Education:  2 year Associate's Degree or 4 year Bachelor’s Degree in Electrical Engineering or similar engineering-related field is preferred.

Start Date:  ASAP

Duration:  3 months+

Location:  Rockford, IL

Compensation:   Highly competitive compensation and benefits. 

Citizenship:  U.S. Citizen or Permanent Resident (legally able to work in the United States) is required
 
Job Location: Rockford, IL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 3-6 months+
Start Date: ASAP
Input Date: 04/18/2017
Last Updated: 05/04/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Jay Kerrigan
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMI / RF Test Engineer - RM

Description:
JSG is looking for a great EMI / RF Test Engineer for our client located in Hawthorne, California.

1st shift, All candidates must be ITAR compliant.
No corp to corp or H1B sponsorship.


Overview:
Our EMI/EMC team works to ensure our avionics hardware will perform when integrated into a complex and delicate system of both sensitive and high-power avionics that must operate through some of the harshest electromagnetic environments imaginable. The team performs exhaustive avionics analysis, design, and test at the board, unit, subsystem, and system levels with work that reaches out to almost all of the departments at the company. You will work closely with a significant number of teams within the company, most consisting of: the hardware design teams, production teams, structures teams, propulsion teams, launch, and mission management teams. They are one of the few teams that interface with almost all aspects of the company and get significant hands on time with flight hardware. They play a crucial role in the development of our systems particularly as we advance our efforts towards satellites and creating safe, reliable, inexpensive, and innovative systems that push the boundaries in size and mass.

Responsibilities:
• Write detailed test documentation including test procedures, test plans, and test reports
• Work closely with avionics unit responsible engineers, test software engineers, and test technicians to successfully plan and execute testing
• Perform detailed testing of avionics components of the launch vehicle and the spacecraft. Must have the specific skills to perform these tests and not just monitor them -- lightning, shielding effectiveness, and ESD testing are crucial
• Design and verify new test methods and procedures with a keen eye on automation, efficiency, and test design trades
• Perform resistance/capacitance/inductance analysis, structural grounding analysis, and circuit isolation analysis as they relate to requirements compliance
• Troubleshoot EMI events from system to board level
• Operate a variety of EMI, RF, and electronics test equipment
• Ensure test equipment needed for testing is functional and calibrated
• Program test automation software to control test equipment per documented test standards
• Perform shielding effectiveness, transfer impedance, and resistance (micro-ohm to tera-ohm) measurements
• Independently perform verifications and document results in a clear, precise, and complete manner
• Support engineering management with confidence; think creatively -- question the status quo, while following documentation and maintaining prescribed quality standards.

Basic qualification:
• Bachelor of science degree in electrical engineering, physics or other similar technical areas of study
• Minimum of 2 years of experience in a role focused on EMI/EMC testing
• Experience performing grounding, bonding, and shielding effectiveness measurements with the following equipment: digital multimeter, milliohm meter, megaohm meter, signal generator, spectrum analyzer, oscilloscope
• Experience with both conducted and radiated EMI/EMC analysis and testing
• Experience with reading, interpreting and following: circuit schematics, PCB layouts, engineering drawings, BOMS, cable harnesses, wiring schematics, interface diagrams, layout drawings, mechanical drawings and CAD software

Preferred skills and experience:
• Advanced degree in Electrical Engineering, Physics or other similar technical areas of study
• Demonstrated experience troubleshooting EMI events from system to board level
• Knowledge of electromagnetic field coupling, ohm's law, Maxwell's equations, boundary conditions, image charge/current, and lumped element modeling
• Demonstrated experience with Mil-Std-1541, Mil-Std-461, Mil-Std-464, Sae-Arp-5412, NASA-hdbk-4002, NASA-Std-4003, NASA-Std-4005, NASA-hdbk-4006, SSP 30237, SSP 30238, SSP 30240, and IEC 61000-4-2
 
Job Number: 355977
Job Location: Hawthorne, CA
Rate: $40hr to $60hr
Per Diem: yes
Overtime: yes
Duration: 6+ month
Start Date: asap
Input Date: 04/12/2017
Last Updated: 05/04/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Richard Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Avionics Design Engineer

Description:
Looking to design inflight entertainment systems utilizing autocad or solidworks
 
Job Number: 11
Job Location: East or West Coast
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6+
Start Date: ASAP
Input Date: 04/14/2017
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian ross
Address: 495 OLD CONNECTICUT PASS STE 110
City, State: FRAMINGHAM, MA 01701
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
Applicant shall:
- Develop and maintain Electrical Wiring Interconnect System (EWIS).
- Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
- Must be capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services .

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7133
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First


Unique Skills:
-Experience with Autocad required; Aerospace experience required.
-Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
-Be Familiar with CFR 14 Part 25 and AS50881.
-Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
-Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Job Description:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7059
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/22/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
 
Job Number: 24-243
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/11/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer II

Description:
Engineer II – Electrical Applications

Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Long Term contract


Unique Skills:
- Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, back shells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.


Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 6826
Job Location: Savannah, GA
Rate: $40-$50
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Certification Engineers - Wichita, KS

Description:
STS AeroStaff Services is currently hiring Electrical Certification Engineers for open positions in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
• Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
• Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
• Assist in development of functional test documents for avionics/electrical systems
• Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
• Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

Qualifications:

• Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
• Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
• Strong written and verbal communication skills and competency in one of the subject areas listed above
• Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38215
Job Location: Wichita, KS
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/19/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
JOB SUMMARY:
The Electrical Design Engineer Reports to the Engineering Manager, The Electrical Design Engineer performs complex assignments often requiring development of new or improved products/processes/techniques. Assesses feasibility and soundness of proposed engineering tests/products/equipment. The position requires an ability to interpret, on a broad basis, the principles, theories, and concepts of an engineering specialty.
PRIMARY DUTIES & RESPONSIBILITIES:
• Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements
• Reviews project-related documentation to ensure its accuracy
• Coordinates project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion
• Defining the installation requirements of electrical systems and components
• Creating wiring diagrams for interior monument cabin furnished equipment
• Creating and designing interior cabin furnished monument Electrical drawings and 3D models
• Performing electrical load analysis for interior monuments
• Ensuring compliance of design to latest customer and airworthiness requirements
• Checking of engineering data produced by peers
• Participating in design reviews of electrical installations for interior monuments
• The selection and application of materials and processes appropriate to each design element
• Ensuring the successful integration of each design element with the product as a whole
• Supporting Mechanical Design Engineers within the group with guidance on electrical issues
• Supporting problem solving during manufacturing build process and through aftermarket queries
• Customer support
• Assisting in definition and supplier selection for components and equipment
• Ensuring technical, commercial and weight targets are maintained
• Communicating effectively and professionally with peers, suppliers and customers
• Development and introduction of product improvements
MINIMUM REQUIREMENTS:
• Bachelor’s degree (BA/BS) from a four-year college or university. Minimum of five years related experience and/or training; or equivalent combination of education and experience.
PREFERRED QUALIFICATIONS:
• Competent user of the incumbent CAD and data management systems – Team center and NX
Aircraft interiors experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/17/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
MUST BE A US CITIZEN

•Develop design drawings in either Microstation, AutoCAD and/or SmartPlant 3D
•Develop PLC panel designs
•Develop designs for instrumentation and power wiring
•Develop lighting and grounding designs
•Develop conduit and wiring designs
•Develop transformers, panels, and electrical room designs
•Develop specifications for electrical and instrumentation equipment
•Ensure designs meet NEC codes
 
Job Number: 39819
Job Location: TN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/16/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Distribution Designer

Description:
Electrical Distribution Designer

Location: West Branch, MI
Duration: 20 months

Department Summary:
The LVD Engineering department at client produces quality, expert and efficient design services within scope and on-time to internal and external clients, to provide safe and reliable electric service to our customers.

Job Description/Responsibilities:
Primarily responsible for electric distribution system design for the Low Voltage Distribution (LVD) Engineering, the LVD Engineering Technician will design projects as approved through the LVD Planning department, and as required for new business approved through the client Management department.

LVD Planning includes distribution circuit System Owners, and CEM includes customer Project Coordinators. These are the two main internal clients of the LVD Engineering and Design department. Designs flow to Scheduling (and then to Field Construction) for execution in partnership with LVD Planning and CEM.

Key Responsibilities in this area include:
- Design electric distribution systems for customer relocation, capacity projects, failures or reliability improvement projects
- Design various new business projects, including line extensions (primary, secondary) and services of various degrees of difficulty, and customer types (residential, commercial, industrial, developments)
- Design in a CAD system
- Identify other pole attachments
- Negotiate with customers and obtaining easements (or work with the Right of Way department)
- Work with government entities for permits (or work with the Permitting department)
- Track projects in spreadsheets and/or databases
- Create projects and/or orders and order materials in SAP
- Communicate work to internal departments (LVD Planning, Forestry, Long and Short Range Scheduling, Field/Construction, Closeout, etc.)
- Create billing invoices

Skills:
The following skills and abilities will set you apart from others:
- Experience with electric utility
- Successfully completed electric power classes
- Electric distribution system design knowledge and experience
- Electric distribution system construction knowledge
- Experience with CAD systems
- Working with SAP

Must have:
- Excellent oral and written communication skills
- Ability to work as an independent contributor with minimal supervision at the assigned physical work location
- The LVD Engineering department assists with storm and emergency restoration activities and includes both office and field assignments; employees must be willing to work additional hours as necessary to assist with storm restoration activities

Education:
- A 2-year Associate Degree in the requisite scientific or technical field, of which, 48 credit hours must be technical in nature. 48 scientific or technical credit hours as measured on a semester basis; the 48 scientific or technical credit hours can be obtained through colleges, technical institutes, licensed apprenticeship programs, trade schools, military programs, etc.
 
Job Number: 17-02027
Job Location: West Branch, MI
Duration: 20 months
Start Date: Asap
Input Date: 04/17/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Drafter/Designer( Plymouth, MN )

Description:
Electrical Drafter/Designer( Plymouth, MN ) 8723
9 Month Contact

Responsibilities:
As an Electrical Drafter/Designer your responsibilities will be to create Printed Wiring Board (PWB) schematic documentation using Mentor Graphics DxDesigner and layout the PWB design in Mentor Graphics Expedition software.
Required Skills:
• Technical or Associate’s Degree in Electrical Drafting/Design.
• Two years minimum experience with Mentor Graphics DxParts, DxDesigner and Expedition design tools.
• Two years minimum experience with DownStream Technologies Blue Print Drawing Editor.
• Microsoft Office experience.
• Ability to obtain a clearance which requires US Citizenship as a pre-requisite.
• Ability to work independently as well as in a team environment.
• Strong communication skills, written and verbal.
• Strong electrical skills.
• Strong business ethics, personal organization and trustworthiness.
• Excellent interpersonal, analytical, problem solving, and time management skills.

Preferred Skills:
• Possess an understanding of geometric dimensioning and tolerancing.
• Strong understanding/knowledge of the IPC PWB specifications.
• Strong understanding of PWB fabrication Process.
• Understanding of Teamcenter PLM toolsets.
• Exposure to production/factory floor environment
• Exposure to or interest in ammunition, reloading, or shooting sports.
 
Job Number: 6518723
Job Location: Plymouth, MN
Rate: Open
Per Diem: yes
Overtime: Yes
Duration: 9 months
Start Date: ASAP
Input Date: 04/04/2017
Last Updated: 04/22/2017
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X101
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must be able to obtain a clearance

Electrical circuit design, analysis, and documentation experience

Mentor Graphics
Power Circuit Design
Analog/Digital Design
Firmware
 
Job Number: 39785
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description

Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.

Skill/Experience/Education

Mandatory:

Electrical Engineering Bachelor of Science degree or similar experience.
10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
Strong understanding of requirements analysis, derivation, and verification.
Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.

Desired:

Hardware/Software verification and validation experience in a DO-254 or similar environment.

Hardware/Software Test Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report. 4-5 Years Yes
DO-254 of similar Firm understanding and experience with verification process for safety critical systems. 4-5 Years Yes
Programmable Logic Design Understanding of programmable logic using FPGAs. Ability to read and understand VHDL and SystemVerilog.
 
Job Number: 1363JM
Job Location: Grand Praire, TX
Rate: $60 per hour
Per Diem: NO Per Diem
Overtime: Yes
Duration: 13 months
Start Date: ASAP
Input Date: 04/11/2017
Firm Name: YOH SERVICES
Attention: Jess
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsible for design, development and certification support of avionics/electrical systems on Beechcraft Defense Company T-6C aircraft.
• Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23.
• Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool.
• Assist in development of functional test documents for avionics/electrical systems.
• Conduct equipment, system, and aircraft ground testing at Beechcraft Defense Company, Supplier or other testing facilities.
• Coordinate with other Textron Aviation Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety.

Required Skills: Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint. Strong written and verbal communication skills and competency in one of the subject areas listed above. Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required. Required Education: Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology.
 
Job Location: KS
Input Date: 04/10/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Location: Orlando, FL
Rate: $35.00 - $65.00/HR
2 month contract
1st Shift


Description
- Conducts or participates in the research, design, development, and testing of COTS or custom computing hardware and/or other electrical components.
- Develops designs as the Hardware Architect f for the installation of components and assemblies into chassis, racks, cabinets, workstations, customer facilities, and/or shelters.
- Plans, directs, reviews and coordinates preparation of project documentation to ensure customer contract and company requirements are met.
- Prepares specifications, evaluates vendors, and analyzes test reports.
- The successful candidate will possess general knowledge in Circuit Design including Input and Output, Standard interfaces, Interconnects, and PWB design and manufacture.
- Candidate will possess the ability to implement designs and changes to designs under general guidance and direction.
- Candidate may have a general knowledge of test equipment and should posses good oral, written, and presentation skills.
- Candidate should be familiar with all phases of design specifically Cabinet design

Skill/Experience/Education
Mandatory:
- 6+ years of experience with Hardware/Interconnect design
 
Job Number: 7178
Job Location: Orlando, FL
Rate: $35.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 2 mos
Input Date: 09/06/2017
Last Updated: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Fort Walton Beach, FL
Rate: $65.00 - $75.00/HR
Duration: 1+ year contract
Shift: 1st Shift

**CANDIDATES MUST HAVE ACTIVE SECRET CLEARANCE OR HAVE HAD ONE WITH THE LAST 2 YEARS**

Description
- Researches and designs electrical systems for integration into various fixed wing platforms.
- Interpret customer requirements to research, develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards

Skill/Experience/Education
Mandatory:
• Ability to work under little or no supervision
• Familiarity with SAE AS50881 design guidelines
• Understanding of ANSI/ASME Y14.100 or related design and drafting standards
• Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis)
• Ability to create and review all electrical drawing types (schematics, cable harness, etc)
• 4+ years of experience with AutoCAD or similar 2D design software tools
• Demonstrated previous success working in a team based environment to meet objectives
• Strong communication skills, both oral and written

Desired:
• Familiarity with C130 or other fixed wing aircraft
• Experience with programming environments Labview and/or Matlab
• Experience with the an engineering change process and/or configuration control process
• Experience with Catia V5 or other modern 3D parametric modeling program
• Experience with Teamcenter PLM software
• Active DoD secret level clearance
 
Job Number: 7348
Job Location: Fort Walton Beach, FL
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 04/20/2017
Last Updated: 05/02/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Archbald, PA
Rate: $50.00/HR
Duration: 1+ year contract
Shift: 1st Shift

**MUST be able to obtain a Secret Clearance**

Description
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
- Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Skill/Experience/Education
Mandatory:
- 9+ years of experience with Firmware
- 9+ years of experience with Analog/Digital Design
- 4+ years of experience with Power Circuit Design
 
Job Number: 7340
Job Location: Archbald, PA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1+ yr
Input Date: 04/19/2017
Last Updated: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Archbald, PA
Rate: $50.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be able to obtain a Secret Clearance**

Description
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
- Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
- Status of clearance is needed on resume.


Skill/Experience/Education
Mandatory:
- 4+ years of experience with electrical power circuit design, analog/digital design, analysis, and documentation.
- Firmware experience.
- Mentor Graphics experience.
 
Job Number: 7328
Job Location: Archbald, PA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/18/2017
Last Updated: 05/11/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: DOE ($40/hr - $45/hr)
Duration: 6+ month contract
Schedule: 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description
-Electrical design support will be required to support missile electrical architecture trade studies and concept design.
-Overall missile electrical design and particular focus for the control actuation system design is required.
-Candidate may need to work with component suppliers.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Skill/Experience/Education (Mandatory):
-Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
-Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
-Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
-Considered experienced, but still a learner.
 
Job Number: 7136
Job Location: Grand Prairie, TX
Rate: 40-45
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 08/29/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 / No Clearance / FPGA DO-254 test Hardware/Software verification and validation TX

Description:
Job Title: Electrical Engineer Level 3
Job Number: 159148/1363
Location: Grand Prairie, TX
Rate: 60/hr max
Compensation: 12 month contract
No clearance

Description:


Description
Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.
Skill/Experience/Education
Mandatory:

Electrical Engineering Bachelor of Science degree or similar experience.
10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
Strong understanding of requirements analysis, derivation, and verification.
Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.
Desired:

Hardware/Software verification and validation experience in a DO-254 or similar environment.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Hardware/Software Test Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report. 4-5 Years Yes
DO-254 of similar Firm understanding and experience with verification process for safety critical systems. 4-5 Years Yes
Programmable Logic Design Understanding of programmable logic using FPGAs. Ability to read and understand VHDL and SystemVerilog. 0-3 Years No
 
Job Number: DW-1363
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 05/10/2017
Last Updated: 06/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret PA

Description:
Electrical Engineer - Level 3
Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Status of clearance is needed on resume.
Skill/Experience/Education
Mandatory:

Electrical circuit design, analysis, and documentation experience

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Firmware 0-3 Years Yes
Analog/digital design 4-5 Years Yes
Power circuit design 4-5 Years Yes
Mentor Graphics Experience 4-5 Years No

Special Needs
 
Job Number: DW-1377
Job Location: Archbald, PA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 04/18/2017
Last Updated: 06/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 07/21/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 3 / no clearance / FPGA SystemVerilog TX

Description:
Job Title: Electrical Engineer Level 3
Job Number: 159069/1356
Location: Grand Prairie, TX
Compensation: 60/hr
Assignment Length: 12 month contract
no clearance
non exempt

Description:

Member of independent verification and validation team responsible for performing evaluation of requirements, design, implementation, test, and supporting documentation as an independent reviewer for an end product that requires NRC approval.

Skill/Experience/Education
Mandatory:

FPGA requirements analysis/derivation, design implementation, design verification, and integration and test.
SystemVerilog for design verification
Desired:

Producing hardware used in nuclear power plants.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

FPGA design/verification Familiarity with requirements analysis and derivation. Familiarity with design architecture and implementation. Familiarity with design verification, integration, and test. 4-5 Years No
SystemVerilog Familiarity with directed tests, constrained random verification. Familiarity with functional testing, code coverage, UVM. 4-5 Years Yes
 
Job Number: JE-1356
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 07/18/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Level 3 with active secret FL

Description:
Job Title: Electrical Engineer Level 3
job Number: 159232/0220
Location: Walton, FL
Compensation: 75/hr
Assignment Length: 4 month contract
Security Clearance Secret
non Exempt


Description
CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY!!!

Researches and designs electrical systems for integration into various fixed wing platforms. Interpret customer requirements to research, develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards

Skill/Experience/Education
Mandatory:

• Ability to work under little or no supervision

• Familiarity with SAE AS50881 design guidelines

• Understanding of ANSI/ASME Y14.100 or related design and drafting standards

• Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis)

• Ability to create and review all electrical drawing types (schematics, cable harness, etc)

• Experience with AutoCAD or similar 2D design software tools

• Demonstrated previous success working in a team based environment to meet objectives

• Strong communication skills, both oral and written

Desired:

• Familiarity with C130 or other fixed wing aircraft

• Experience with programming environments Labview and/or Matlab

• Experience with the an engineering change process and/or configuration control process

• Experience with Catia V5 or other modern 3D parametric modeling program

• Experience with Teamcenter PLM software

• Active DoD secret level clearance

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Electrical integration design per AS50881 6-8 Years No
AutoCAD or similar drafting program 4-5 Years Yes
Drafting per ASME Y14.100 4-5 Years Yes
Electrical Component Integration Interpreting Interface Control Documents to install new equipment into existing platforms 9-10 Years No
 
Job Number: DW-0220
Job Location: Walton, FL
Rate: 75/hr max
Duration: 4 months
Input Date: 04/21/2017
Last Updated: 05/11/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Mechatronics

Description:
Candidate Requirements:
We're seeking someone with at least 2-3 years of engineering experience in electronics, electrical, or electronic component testing experience

Must have test experience where you've collected and analyze data. Whether that is mechanical or electrical engineer doesn’t matter as long as they have the test experience. If you have no test experience, you must be an electrical engineer.


Must have skills:
1. Candidates should ideally have test experience AND mechanical or electrical engineering experience. (If they have no testing experience, they must have the electrical engineering experience)

2. Bachelor's degree in electrical engineering

3. Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here.

What Makes This Role Interesting:
You will have a unique opportunity to work in not only current products, but new product development also. These products are brand new that we’ll roll out for the next model year. You’ll get the opportunity to look into what the whole team does with working on a new product and current products.
 
Job Number: 3081
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 04/14/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr.

Description:
Electrical Engineer Sr.

Location: Marion, MA
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80
Travel: Mostly to Middletown, RI. Other locations could be anywhere, almost always CONUS.
**MUST have an ACTIVE SECRET CLEARANCE or have it turned on WITHIN 72 HOURS**

Description
-This business is in search of a highly skilled senior electrical engineering, (level 3) to join our team in Marion, MA. This role offers an exciting opportunity to join a top-tier employer known throughout the world for its engineering prowess, game changing product offerings, and robust solutions.
-The candidate will be a technical contributor for the Heavy-weight Torpedo (MK48 CBASS) Program, taking on the following responsibilities: production support, development, integration and test, qualification testing, etc.
-The person needs to have at least 5 years of experience developing, debugging, and supporting a production line for complex analog, or digital, or both electronic designs.
-Robust circuit design, analysis, simulation, functional testing, DVT, first article testing, and qualification testing will be performed.
-A wide variety of tasks will include working on an experienced EE Team, leading/directing technicians and junior engineers, performing component research, board level design and troubleshooting.
-The engineer will collaborate routinely with other engineering disciples.
-The candidate must be able to demonstrate a sustained history of many successful electronic designs.
-The engineer will write a variety of documents.
-A strong understanding of designing to withstand and succeed in environmental (thermal, vibration, humidity, etc.), electro-magnetic interference (EMI), and margin testing are part of the test scope.
-The candidate should possess a history of excellent performance reviews.
-Excellent multitasking skills are a must, as typically engineers here juggle several tasks/programs/ products simultaneously.
-The candidate must have excellent verbal and written communication skills and a strong ability to successfully work with customers, program management, engineering project managers, and within the multidisciplinary engineering and manufacturing teams.
-Some overtime and travel are required.
-In addition, the candidate will be involved with other strategic activities including bid and proposal writing, field demonstrations and testing, customer and internal management presentations.
-The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience as well as passion for analog and/or digital engineering.
-If the person is a digital specialist, considerable experience with programmable logic design is required.

Skill/Experience/Education (MANDATORY):
1. US Citizen 2. A security clearance 3. BSEE minimum
4. Outstanding ability to multitask
5. 5+ year history of complex design, testing, and troubleshooting skills and aptitude
6. Excellent written and verbal communication skills
7. The ability to work well in a team environment
8. Proficient with common laboratory engineering tools such as logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment
9. Mastery of MS Office suite
10. Board Design: Analog and/or Digital Board Design Experience (6-8+ years required)

Desired:
1. Matlab, expertise with environmental, designing to mitigate electro-magnetic interference (EMI), and margin testing are required. LabView and leadership experience.
2. If analog EE: PSPICE, experience designing front end Sonar Receivers and EPDM. Systems Engineering experience is desired..
3. If digital EE: Expertise with high speed digital and signal integrity practices;
 
Job Number: 7280
Job Location: Marion, MA
Rate: 40-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/06/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active Secret Clearance with investigation within the past five years CA

Description:
Title: Electrical Engineer
Work Location: Palmdale, CA
Start Date: 02/06/2017
Secret Clearance with investigation within the past five years.

Job Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. The applicant will also perform electrical load analysis and analysis and integration of aircraft generators. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents Candidate will be part of a team effort to develop wiring from design to installation, to include liaisoning between Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance with specifications.


Mandatory Skills:
Experience performing electrical loads analysis, electrical harness design, and creating wiring drawings for aircraft.
Secret Clearance with investigation within the past five years.


Desired Skills:
Experience with generator analysis and integration.
Experience creating electrical schematics for aircraft.
Experience using electrical harness design tools such as Mentor Graphics Capital Harness.
Experience with CATIA V5

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
Wiring Harness Installation Install wiring harnesses into vehicles using 3D CAD, preferably CATIA V5 9-10 Years Yes
 
Job Number: DW-0425
Job Location: Palmdale, CA
Rate: 47-70/hr DOE
Duration: 10 month contract
Input Date: 04/04/2017
Last Updated: 05/05/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer – Testing

Description:
Job Title: Electrical Engineer – Testing
Location: Portland, OR. 97217
Duration: 14 months
Job Description:
• The role is to assist the lead engineer and developing test cases and testing of an electronic component.
• Support client products that are out in the field and answering custom work orders and Shop Calls. This resource will be working on heating ventilation and air conditioning (HVAC).

Responsibilities:
• The team is responsible for interior and exterior lighting of all products (headlights, taillights, dome lights in the vehicle). Also responsible for all the switches on the dash and in the truck. They also work with their partners in cab to do the controls for heating ventilation and air conditioning to make sure everything is working correctly and functions as intended. Also making sure that any issues and problems get brought up with the supplier and get resolved.
• All the client products are supported that are going through the plant right now. The first start of the day will be making sure the plants are happy, looking at custom work orders, shop calls coming in and making sure those are resolved.
• Then, working with the lead engineer to make sure the current state of the testing is implementing these test cases with our product validation team and making sure the vehicles are using these units are functioning correctly.
• Managing the test cases and the results and creating some sort of results tracking tool/spreadsheet.
• The first few months they will be working mostly on getting up to speed to support the current product (80% learning the systems and helping the lead engineer to ensure all items are covered) .
• Once they stabilize and are able to work independently be working and making sure that the product is as expected. They may also work on other side projects to help the lead engineer.

Requirements:
• Looking for 3 years of engineering experience in electronics, electrical, or electronic component testing experience
• Need to have at least a BA degree with over 2 years of experience.
• We really want someone who’s had test experience where they’re able to collect and analyze data. If no test: they need to be an electrical engineer.

Hard Skills:
• Candidates should ideally have test experience AND mechanical or electrical engineering experience.
• Bachelor's degree in electrical engineering
• Great PC skills with spreadsheets and presentation type experience. To assist the lead engineer with getting everything prepared to present back. Good oral / written communication skills comes into play here
 
Job Number: 3075
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 14 Months
Start Date: ASAP
Input Date: 04/07/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer(V&V VHDL SystemVerilog) in Grand Prairie, TX #1363AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Electrical Engineer Level 3
Job Number: 159148
Location: Grand Prairie, TX
Compensation: 12 month contract
No clearance
Non exempt

Description:
Subordinate to the Integrated Product Team Leader. Responsibilities include hands on lab work, data analysis, technical writing and facilitating meetings.

Skill/Experience/Education
Mandatory:

Electrical Engineering Bachelor of Science degree or similar experience.
10 years of experience in any combination of hardware verification and validation in related industry (nuclear power instrumentation and control, commercial aviation, or defense).
Strong understanding of requirements analysis, derivation, and verification.
Ability to derive test requirements and generate test plan, standard operating procedures, conduct test and generate test reports.

Desired:

Hardware/Software verification and validation experience in a DO-254 or similar environment.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory (Yes/No)

Hardware/Software Test Derive test requirements, generate test plan, generate test procedures, conduct test, generate test report. 4-5 Years Yes

DO-254 of similar Firm understanding and experience with verification process for safety critical systems. 4-5 Years Yes

Programmable Logic Design Understanding of programmable logic using FPGAs. Ability to read and understand VHDL and SystemVerilog. 0-3 Years No
 
Job Number: #1363AS
Job Location: Grand Prairie, TX
Rate: Open, DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 04/26/2017
Last Updated: 05/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers (Level 2 & 3) - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Electrical Engineers for open positions in Melbourne, Florida.

Note: All candidates must have has secret security clearance in the last five years.

Job Duties:

• Researches, develops, designs, and tests electrical components, equipment, systems, and networks
• Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes

Qualifications:

• Strong MS Office skills, strong technical writing abilities, must be willing to relocate to Palmdale in approx. 1-2 years
• Knowledge of electrical harness continuity testing, MIL-STD-810 testing, fiber optic testing, data communication cable and coaxial cable testing, and basic programming ability desired
• Experience in support of aerospace electrical subsystem design or test operations
• Level 2: 2 Years’ with Bachelors in Science Electrical Engineering; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science Electrical Engineering; 3 Years’ with Masters; 0 Years’ with PhD
• Position requires an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38296
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Engineer

Description:
� Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
� Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
� Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Unique Skills:

7000 hours CATIA V5, Electrical Work Benches required

Experience/Education:

BSME/BSEE or equivalent experience
 
Job Number: 24-155
Job Location: Savannah, GA
Rate: $56 to $67 per hour
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 06/27/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
 
Job Number: 7231
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/23/2017
Last Updated: 10/03/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Electrical Harness Installation Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term Contract



Unique Skills:
Applicant shall:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7031
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 08/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Duration: Long Term Contract (1-4 years)
Shift: 1st Shift


Unique Skills:
- Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6951
Job Location: Savannah, GA
Rate: $56.00 - $67.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Engineer (Special Missions)

Description:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Unique Skills:
- 5000 hours of CATIA V5, Electrical Work Benches required

Experience/Education:
- BSME/BSEE or equivalent experience
 
Job Number: 24-167
Job Location: Savannah, GA
Rate: $58 to $63 per hour
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Systems Engineer

Location: Savannah, GA
Rate: $58.00 - $64.00/HR
Long Term contract


Unique Skills:
1) AutoCad required Catia V5 preferred
2) G650 and G500 electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7041
Job Location: Savannah, GA
Rate: $58.00 - $64.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 02/14/2017
Last Updated: 06/05/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Designer

Description:
Electrical Wire Harness Designer - Eng II

Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Long Term contract


Unique Skills:
- Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
- Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
- Select qualified electrical components such as connectors, backshells, and other parts.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
- Aerospace Experience is required
- Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
- Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
- Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 7078
Job Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro Mechanical Engineers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Electro Mechanical Engineers for open positions in Melbourne, Florida.

Note: All candidates must have had secret security clearance in the last five years.

Job Summary:

Applies electrical, electronic and mechanical principles to components and systems, including assembly, analysis, and documentation of results; construction of developmental assemblies, sub-assemblies and components; and quality testing. Supports and participates in the design, test, modification, fabrication and assembly of prototype electromechanical systems.

Job Duties & Qualifications:

• Electro-Mechanical Engineer (Anti-Ice):
o Primary responsibility includes cognizant engineering of an electronic controller, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
o Hardware/software knowledge, knowledge of MIL-STD-1553 and power, military aircraft experience is required
o Candidate must have experience with development of procurement specifications and supplier interface
o Knowledge of anti-ice controllers is a benefit
o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
• Electro-Mechanical Engineer (Lighting):
o Primary responsibility includes cognizant engineering of an aircraft lighting system, details of which include requirements maturation, aircraft/LRU integration, and supplier design/verification oversight
o Control wiring interfaces, junction box, control panel and power panel design tasks using SAE AS 50881 and proven commercial practices
o Hardware/software knowledge, knowledge of various aircraft bus architectures (RS-485, RS-232, MIL-STD-1553) and power, military aircraft experience is required
o Candidate must have experience with development of procurement specifications and supplier interface
o Knowledge of aircraft lighting systems/integration is a benefit
o Candidate shall be able to work both independently and as part of a larger multi-disciplined team
o Must have excellent communication skills and possess both a desire and ability to interface effectively with people
• Electro-Mechanical Engineer (Cables):
o Responsibilities to include the development, integration and documentation of electrical cable designs of air vehicle systems
o Develop electrical wiring designs of a functional system including the selection of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
o Designs to be accomplished utilizing the HarnesSys wiring tool and TeamCenter
o Create preliminary block diagrams, system wiring diagrams and detailed cable assembly “Product Definition Packages” (PDPs) using SAE AS 50881 and proven commercial practices
o Facilitation of design reviews with key stakeholders to ensure designs meet requirements
o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
• Electro-Mechanical Engineer (Lines Routing):
o Position requires extensive inter-departmental coordination with other vehicle system departments including structures, crew & equipment, ECS, maintenance and manufacturing operations teams
o Requires knowledge of aircraft-type electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junctions systems, etc.
o Proficiency in the design of support brackets and the ability to prepare detailed “Product Definition Packages” (PDPs) utilizing NX or similar 3D CAD software is required
o Proficiency in 3d cable routing is a required
o Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplish them simultaneously, and comprehend and analyze complex problems and develop solutions
• Level 2: 2 Years’ with Bachelors in Science; 0 Years’ with Masters
• Level 3: 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• Must have an active DoD Secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38300
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/20/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer

Description:
Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASASP
Input Date: 09/25/2017
Last Updated: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineering Contractor

Description:
Electronics Systems Engineering Contractor

Location: Savannah, GA
Pay Rate: $55/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Aircraft power / electrical / avionic systems design, integration and implementation.
-Design, certification and system support

Job description:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7054
Job Location: Savannah, GA
Rate: 55.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/13/2017
Last Updated: 07/31/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
Embedded S/W Engineer - Level 2
Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Must have Secret clearance in place prior to submittal of resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering
Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: DW-1366
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 04/11/2017
Last Updated: 06/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
Embedded S/W Engineer - Level 2
Description
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel. Clearance status must be on resume.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, COTS SBC, Linux (Red Hat), VxWorks, Git, J1939 or CANBus Experience, Eclipse, Embedded SW Engineering, And Ground Vehicles and Autonomy Experience. Must have active/transferable Secret Clearance prior to submittal of resume.
Desired:

Driver Development, Python, ROS, CODESYS

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
COTS SBC 0-3 Years Yes
Linux (Red Hat) 4-5 Years Yes
VxWorks 4-5 Years Yes
Git 4-5 Years Yes
J1939 or CANBus Experience 4-5 Years Yes
Eclipse 4-5 Years Yes
Ground Vehicles and Autonomy Experience 4-5 Years Yes
Embedded SW Engineering 4-5 Years Yes
Driver Development 0-3 Years No
Python 0-3 Years No
CODESYS 0-3 Years No
ROS 0-3 Years No
 
Job Number: DW-1367
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 04/11/2017
Last Updated: 06/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded SW Engineer(C/C++/Red Hat/ Embedded/ Cleared) in Grand Prairie, TX #1366AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Embedded Software Engineer Level 2
Job Number: 159151
Location: Grand Prairie, TX
Compensation: DOE
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
Must have Secret clearance in place prior to submittal of resume.
Resume must have status of clearance stated.
Exempt

Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.

Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, C/C++, Linux (Red Hat), and Embedded SW Engineering

Desired:

Razor (CM Control), Domain Knowledge of Air and Missile Defense, Seeker Programming and/or Integration, Hardware-in-the-Loop (HWIL) - Unit Under Test Experience, Embedded SW Engineering

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Seeker Programming and/or Integration 4-5 Years No
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years No
Embedded SW Engineering 4-5 Years Yes
 
Job Number: 1366AS
Job Location: Grand Prairie, TX
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 04/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - 3/4/5 Cuda development VxWorks Linux Ubuntu CentOS Windows CA

Description:
17006478/1579
Embedded Software Engineer - 3/4/5

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Mar 27, 2017

Position: Embedded Software Engineer 3/4/5

Location: Redondo Beach, CA

Duration: 9 Months

Rate: open

Designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, aircraft flight control and display systems, pacemakers, defibrillators, mechanical and electrical systems. Interfaces with customers, suppliers, application users and other technical and support personnel.


Basic Qualifications:

Minimum 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.

Cuda development

Embedded ARM processor developer
Embedded Power PC processor developer
Embedded Intel PC processor developer

Strong OS Experience:

Wind River VxWorks Versions 6 – 7
Wind River Linux Versions 6 -7
Yocoto Project Linux

Development Environment: OS:

Windows 7
Ubuntu 14 – 16
Red Hat Linux 7
CentOS 7


Preferred Qualifications:

Knowledge of Software development process
Knowledge in algorithms
Hardware Knowledge
 
Job Number: MB-17006478
Job Location: Redondo Beach, CA
Rate: open rate
Duration: 9 month contract
Input Date: 05/09/2017
Last Updated: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

Must have active / transferable Secret Clearance prior to submittal and shown on resume.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

Desired:

Domain Knowledge of Air and Missile Defense


Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: DW-1368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 04/11/2017
Last Updated: 06/07/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Lab Test Engineer

Description:
Required Skills/Certifications



Bachelor’s Degree in Mechanical or Electrical Engineering from accredited college or university.

5-10 years of experience in engine testing or program management.

Specific Knowledge of Diesel Engine Mechanics

Specific knowledge of Electrical control systems

Specific knowledge of Microsoft Office applications (including excel and project)



Desired Skills/Certifications



Strong drive for meeting internal and external customer requirements.

Motivated and self-starter.

Experience in Engine Testing.

Ability to work with engineering, global labs, and program management effectively.

Ladder Logic and other programming language experience

Has working knowledge of a diesel engine.

Highly organized and close attention-to-detail.
 
Job Number: 51692
Job Location: Erie, PA
Overtime: yes
Duration: 1 year+
Input Date: 04/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Hardware- 5 with active secret MD

Description:
Job title: Engineer Hardware
Job Number: 158810/17001313/1569
Location: Patuxent River, MD
Compensation: 75/hr max
Assignment Length: 12 month contract

Security Clearance: Interim required to start


Description:

• Instrumentation and Data Systems engineer responsible for the development, design and maintenance of complex instrumentation and data system solutions for laboratory, ground and flight test activities on the various flight test programs.

• Maintain Flight Test Instrumentation system configurations and coordinate test activity, maintenance and communicate instrumentation issues and status across teams.

• Support planning and flight test readiness reviews; flight test planning working groups and coordination meetings; pre and post test briefings.

• Define data system configurations, sensor selection, installation, checkout requirements and operational procedures.

• Define air vehicle interface, integration and logistic requirements.

• Knowledge of telemetry, onboard recording, Data Acquisition Systems (Teletronics and Acra) and ground stations.

• Provide test crews, manufacturing and/or suppliers the guidance and direction required for operation, fabrication, modifications, assembly and checkout of Instrumentation systems and associated equipment.

• Experience in computer operating systems and application software (AutoCAD), as well as database development for measure and test data.

• Prepare system specifications, Request for Quotes (RFQ’s) and Statement of Work (SOW’s) that satisfy test and system requirements. Support test activities, anomaly resolution and process improvement initiatives.

• Must have strong leadership, communication and interpersonal skills.

• Multiple shift work may be required.

• Travel required to multiple NGC and customer facilities.


Basic Qualifications:

• BS degree in Science Technology Engineering or Math (STEM) plus 14 to 19 years related experience.

• Must be eligible to get a Secret Security clearance. Interim Clearance required to start.


Preferred Qualifications:

• BS degree in Electrical Engineering with 14+ years of aircraft instrumentation experience is preferred.

• Exp with Instrumentation systems to include Teletronics (TTC / Teletronics Technology Company) or Acra.
 
Job Number: MB-17001313
Job Location: Patuxent River, MD
Rate: 75/hr max
Duration: 1 year
Input Date: 03/20/2017
Last Updated: 05/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III / Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines CA

Description:
Job Title: Engineer III
Job Number: 159153/4155
Location: Irvine, CA
Compensation: 50-60/hr
Assignment Length: contract


Description:


Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.)

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-4155
Job Location: Irvine, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 05/11/2017
Last Updated: 05/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III( RTCA/DO-178B development and verification) in Irvine, CA #4155AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Engineer III
Job Number: 4155
Location: Irvine, CA
Compensation: DOE
Assignment Length: 6 month contract

Description:
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Key Skills / Qualifications:
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

Key Requirements for the job:
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: #4155AS
Job Location: Irvine, CA
Rate: Open, DOE
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/05/2017
Last Updated: 05/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical Design - 5 with active secret / NX FL

Description:
1582
Engineer Mechanical - 5 (Job Number: 17007853)

Number of Openings: 1

Location(s): United States-Florida-Melbourne

Shift: 1st Shift

Target Start Date: Jun 5, 2017

Subsystem Design Engineer -5 (multiple openings)

Rate: $70/hr.

Work Week: 9/80

Duration: 1 year

Active Secret clearance required to start


The candidate must have a DoD Secret Clearance that has been established or renewed within the last 6 years. Final offers are contingent upon SAP award.

Utilizing Siemens NX 10, the candidate will be responsible for designing detail parts, assemblies and installations associated with fixed-wing aircraft ECS, Fuel, Fire protection, Secondary Power, Electrical subsystems, mechanisms and Hydraulics subsystems.

Responsible for the development and integration of various aircraft ECS components including ducts, manifolds, plenums.

Responsible for the development and integration of aircraft fuel and hydraulic system components including valves, filters, reservoirs, mechanical lines, machined and sheetmetal detail parts.


Basic Qualifications:

14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD or equivalent years of experience and education.


Preferred Qualifications:

Siemens NX or Teamcenter experience.
 
Job Number: MB-17007853
Job Location: Melbourne, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 06/30/2017
Last Updated: 07/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV

Description:
Engineering Designer IV

Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates should have experience specifically with flight electronics packaging for space applications **
** Candidates should have design experience of electro-mechanical packaging or cable harnesses **
** Candidates should be able to design from concept to a drawing released in Creo **

- Perform engineering design tasks related to space electronics based products.
- Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
- Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts.
- Position will support various different Electric Propulsion programs

Skills:
- Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
- Familiarity with aerospace/defense engineering design and production processes and disciplines.
- Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
- Extensive experience in PRO-E/CREO CAD design is a must (NX CAD design preferred).
- Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
- Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Education:
- Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
 
Job Number: 6990
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/13/2017
Last Updated: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV / PRO-E/CREO CAD design are a must / Candidates should have experience specifically with flight electronics packaging for space applications CA

Description:
Job Title: Engineering Designer IV
Job Number: 158326/6312362
Location: Canoga Park, CA
Compensation: 60/hr max
Assignment Length: 6 month contract

Description:


Duties: ** Candidates should have experience specifically with flight electronics packaging for space applications **

** Candidates should be able to design from concept to a drawing released in Creo **

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Perform engineering design tasks related to space electronics based products.
Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

Skills:
Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application. Proficiency in generating drawings is required.
Familiarity with aerospace/defense engineering design and production processes and disciplines.
Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis. Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Keywords:
Education:
Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics
 
Job Number: MB-6312362
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 04/21/2017
Last Updated: 04/24/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
• Responsible for installations for aircraft systems with an emphasis on component installation and water and waste systems.
• Qualified candidates must have experience with component requirement definition, qualification testing, and supplier management.
• In addition to experience with water/waste system and component design as well as general component installation design, the ideal candidate would have a high level of proficiency with CATIA V5 and the tubing and sheet metal design work benches from initial conceptual layouts and routing through detailed design.
• Must be able to interpret and generate system schematics and should have experience aircraft integration with multiple other aircraft design organizations.
• Experience with ARP 4754A ,the ability to create/decompose requirements, and the V & V on these requirements is preferred.

Experience/Education:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-193
Job Location: Savannah, GA
Rate: $63 - $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/22/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment Tool Designer

Description:
Summary: This position involves the design/modification of tooling and peculiar ground support equipment (GSE) required for VH-92 / S-92 aircraft maintenance, and the validation / 'fit check' of each designed/modified item. In addition to design work, this position will also involve support of the logistical requirements associated with all design work and contract requirements, as well as sustainment support throughout the duration of the contract.
The following outline the normal scope of work associated with this position:
- Coordinate with VH-92 GSE IPT Lead to support all GSE engineering related requirements.
- Design support of new peculiar support equipment (PSE)
- Support Engineering change proposals (ECPs)
- Support all drawing updates requirements/revision control for existing GSE
- Validate newly designed GSE
- Evaluate COTS items from our suppliers as needed.
Required Skills:
- Must be able to work with CATIA V5. MatrixOne knowledge is desired. Cadra and Catia V4 knowledge is beneficial.
- A practical knowledge of and experience with maintenance tools (e.g. aircraft and/or auto repairs)
- A working knowledge of statics and dynamics (Mechanical Engineering)
- A general understanding of material strengths and properties
- Electrical/hydraulic design capabilities are beneficial.
 
Job Number: 37912
Job Location: Stratford, CT
Duration: 12 months
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment and Furnishings Engineer

Description:
Equipment and Furnishings Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Long Term contract


Unique Skills:
- Applicant shall: Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
- Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
- CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7224
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 10/03/2017
Last Updated: 10/09/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - NJ location

Description:
Description
The task is to perform VHDL code inspections to a designed FPGA and write a code review procedure/update to show how the specific sections of code are linked back to and verifies requirements. The requirement specification exists so the task is code inspections and requirement tracing.

Required Experience
• Obtains a substantial skill base, highly proficient knowledge and a competent understanding of electrical engineering expertise, standards, design process & procedures, tools, principles and theories to complete engineering tasks associated with Electrical or Electro-Optical products.

• Create, develop and design complex electrical circuits or subsystems which require a broad detailed knowledge of several fields (i.e. electrical systems, image science, multi-platform) with focus on the area of electronics.

• Demonstrates proficiency at performing root cause analysis and initiating corrective measures relating to the electronics during all phases of development and field installation.

• Provide significant technical leadership to design review preparation, execution, and timely action item closure for complex issues

• Experience in FPGA/VHDL design/architecture

Desired Skills
• Experience in device physics and active remote sensing techniques (i.e. laser/lidar) is a plus

• Experience in analog circuitry or power supply design

• Experience with RF transmitters, receivers, filters (both lumped element and microstrip/stripline), up-conversion and down-conversion techniques, and antenna design.

• Knowledge of design techniques for RF receivers, LNAs, filters, mixers, PLLs, local oscillators, and RF detection circuits.

• Knowledge of RF system principles as applied to the analysis and development of models for validation of designs prior to physical fabrication and test

• Lead multi-disciplined teams through development of performance requirements, circuit design/analysis and test troubleshooting.

• Effectively communicate technology applications and benefits to a wide audience including customers and senior management.

• Ability to effectively communicate technology applications and benefits to a wide audience including customers and senior management.

Years of Experience
10+ years

Minimum Degree Required
Bachelor's degree

Clearance Requirement
Secret
 
Job Number: 871
Job Location: Clifton, NJ
Rate: open
Per Diem: split
Overtime: possible
Duration: 12mos+
Start Date: ASAP
Input Date: 04/17/2017
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer-Stability & Control

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years’ experience in flight sciences, including:

Stability & Control
Aircraft Performance
6DOF Flight Simulation
Essential functions:

Define and validate flight test specifications
Perform data review and analysis for verification of aircraft level requirements
Utilize flight simulation models and data
Support ground and flight test activities
Prepare flight test reports
Desired Qualifications:

Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor or advanced degree in Aerospace Engineering.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 07/13/2017
Last Updated: 07/26/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls Engineer - RM

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15+ month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: yes
Duration: 15 months
Start Date: asap
Input Date: 03/27/2017
Last Updated: 05/04/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Richard Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Test Engineer CA

Description:
Job Title: Hydraulics Test Engineer
Job Number: 159152/4000
Location: Irvine, CA
Compensation: 50-55/hr
Assignment Length: contract


Description:


Must have Hydraulic test background and technical writing ability. Perform Qualification testing. developing test procedures, lead test technicians to conduct testing and prepare test reports.

Analyzes, researches, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Designs products or systems of diverse/difficult scope and complexity using engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.). Develops and recommends solutions to a variety of complex engineering requirements to ensure that design objectives are met. Projects at this level are assigned to develop in-depth knowledge and skills and to build knowledge of the organization, processes, and customers.

· Bachelors degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline. Masters degree (MS preferred. Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience.
· Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise.
· Demonstrated ability to investigate and implement new technologies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.
 
Job Number: JK-4000
Job Location: Irvine, CA
Rate: 50-55/hr
Duration: 6 month contract
Input Date: 05/11/2017
Last Updated: 05/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Test Engineer in Irvine, CA #4000AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Sr. Engineer
Job Number: 4000
Location: Irvine, CA
Compensation: DOE
Assignment Length: 6 month contract

Description:
Analyzes, researches, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Designs products or systems of diverse/difficult scope and complexity using engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.). Develops and recommends solutions to a variety of complex engineering requirements to ensure that design objectives are met. Projects at this level are assigned to develop in-depth knowledge and skills and to build knowledge of the organization, processes, and customers.

Key Skills / Qualifications:

· Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline. Master’s degree (MS preferred. Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience.
· Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise.
· Demonstrated ability to investigate and implement new technologies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

Key responsibilities:
Must have Hydraulic test background and technical writing ability. Perform Qualification testing. developing test procedures, lead test technicians to conduct testing and prepare test reports.
 
Job Number: #4000AS
Job Location: irvine, CA
Rate: Open, DOE
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/01/2017
Last Updated: 05/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
**Long term temp assignment**
** This position specifically requires US Citizenship**

Job Description
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT36298
Job Location: Windsor Locks, CT
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 04/12/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 09/09/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2

Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
6+ month contract
1st Shift

**Must have an active SECRET clearance**

Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education
Mandatory:
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
- Must be able to obtain and maintain a DoD Secret level security clearance.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 7085
Job Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 02/16/2017
Last Updated: 06/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 2 / no clearance FL

Description:
1341
Manufacturing Engineer - Level 2
Clearwater, FL
30-35/hr max
3 months +
No Clearance

Description
Provide manufacturing engineering support to the build of electromechanical cable assemblies as a contributing member of an integrated product team (IPT). Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required. Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer. Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents. Support the design change management activities of the IPT. Analyze process defect data and trends and help define and implement corrective actions. Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability. Interface with technical counterparts in other organizations both within and outside Clearwater Operations.
Skill/Experience/Education
Mandatory:

Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies within an Integrated Product Team type of work environment. Skill with surface mount technology and automated smt build equipment. Strong interpersonal skills and demonstrated ability to work with co-workers and others from diverse backgrounds. Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel. Mechanical and electrical aptitude, and the ability to quickly learn new software applications. Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point. Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis. Willingness to work overtime and during off-days occasionally as required to support production operations.
Desired:

Bachelors degree from an accredited University in Engineering. Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems. Strong technical understanding of cable assembly producibility and process flow. Specific experience with SAP and Solumina manufacturing execution system.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Cable Build Processes Build Process Work Instruction Authoring 4-5 Years Yes
 
Job Number: DW-1341
Job Location: Clearwater, FL
Rate: 30-35/hr max
Duration: 3 months +
Input Date: 05/16/2017
Last Updated: 05/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineering Planner (Fabrication) Level 3 (KS)

Description:
Manufacturing Engineering consists of jobs which provide manufacturing producibility knowledge and information for the engineering and manufacturing processes.

Job Family Description:

Implements fabrication, assembly, or installation manufacturing plans by coordinating with suppliers, engineering, and manufacturing teams. Develops tooling, interchangeability and replacement, and functional test plans. Using the established manufacturing process flow, defines sequences of events, develops text and graphics work instructions, manufacturing datasets, tooling requirements, and manufacturing bills of material. Communicates with engineering teams to influence and clarify design concepts. Coordinates change incorporation, optimizes processes, addresses producibility issues and production and postproduction problems. Has the ability to demonstrate configuration control of the hardware, within the manufacturing build plan. Ability to apply process knowledge in one or more of the following areas; Composite non-metallic, Electrical/Electronics, Machining, Sheet metal, Systems and Structures.

Requirements:
Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

1st Shift
OT is as required
Possible travel to Tulsa/McAlester
No Per Diem

Candidates must be comfortable with walking around on the shop floor and working in an office environment

SKILLS NEEDED:
SAP is a +++
Must have a background in Production Plans/Planning
Technical Planning background (Fab/Light Structures/Assembly/Machined Parts)
Metal finishing experience

NO LEAN CANDIDATES as Lean backgrounds are not 'Technical'
Pricing
 
Job Number: FD-492354KS
Job Location: Wichita, KS
Rate: $40.00/HR BOE
Per Diem: No - Local Talent Only
Overtime: As Required
Duration: 3 months or longer
Start Date: 03/31/2017
Input Date: 04/13/2017
Last Updated: 04/20/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 1

Description:
Manufacturing Planner 1

Location: Mesa, AZ
Duration: 6+ months

Description:

Skill Code: 67B-Electrical/Electronics

Assists in development, implementation and maintenance of various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists in the identification of tooling requirements and processing tooling orders based on manufacturing and engineering requirements. Assists in investigation and resolution of manufacturing related issues. Collects data to support producibility assessments for part or product designs. Assists in developing work statements and sequencing of limited scope with internal business partners. Assists in the review, maintenance and monitoring of internal documents. Works under close supervision.

Education / Experience: AA degree in related discipline.
 
Job Number: 17-05214
Job Location: Mesa, AZ
Duration: 6 months
Start Date: Asap
Input Date: 04/17/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 1

Description:
Manufacturing Planner 1

Location: Mesa, AZ
Duration: 6 months

Description:

Skill Code: 67B-Electrical/Electronics

Assists in development, implementation and maintenance of various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists in the identification of tooling requirements and processing tooling orders based on manufacturing and engineering requirements. Assists in investigation and resolution of manufacturing related issues. Collects data to support producibility assessments for part or product designs. Assists in developing work statements and sequencing of limited scope with internal business partners. Assists in the review, maintenance and monitoring of internal documents. Works under close supervision.

Education / Experience: AA degree in related discipline.

Additional Comments:
This assignment is to support the implementation of Demand Flow Technology (DFT) at the Mesa Electrical Composite Center of Excellence (ECoE) and will require Manufacturing Planner resources.
 
Job Number: 17-05214
Job Location: Mesa, AZ
Per Diem: Split
Overtime: possible
Duration: 6 mos
Start Date: 4/30/17
Input Date: 04/12/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Mechanical Design Engineer - Level 2

Location: Dallas, TX
Rate: $50.00 - $60.00/HR
6 month contract
1st Shift

**Must have a current ACTIVE secret clearance**

Description
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


Skill/Experience/Education
Mandatory:
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 6908
Job Location: Grand Prairie, TX
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 06/20/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer - Solidworks

Description:
Title: Mechanical Designer
Location: Anaheim, CA (LOCAL CANDIDATES ONLY)
Duration: 6 month contract


Basic Qualifications

Must be very good in AutoCAD and Solidworks 2015!!!!!!!
Solidworks CSWP or CSWE is preferred
Required:

High school graduate and two (2) years college - mechanical/electrical engineering courses
8-10 years design experience on or around machine design, vehicle design, power train, industrial equipment automation, pneumatics, & hydraulics
Proficient in parametric solid modeling & CAD software packages; minimum of 5-10 years experience
Proficiency in AutoCAD & SolidWorks; minimum of three years experience
Proficient in developing correct form, fit & function of designs
Proficient in design & detail of components & assemble &make supporting analysis
Familiarity with maintenance requirements & procedures for common mechanical components
Familiarity with weldment drawings & callouts
Proficient in materials selection & application
Proficient in fastener selection & design
Proficient in using measuring devices such as scales, calipers, & micrometers
Proficient in configuration & document management
Proven knowledge of ASME Y14
Proven minimum two (2) years experience working with Microsoft applications (Word, Excel, PowerPoint, Outlook)
Desired Qualifications:

Accuracy, focus, productivity, good communication skills
Ability to work with tight schedules *Familiarity with SmarTeam software
Proficient in geometric dimensioning & tolerancing
Knowledge of AWS welding standards & requirements
Required Education

High school graduate and two (2) years college
Preferred Education

Bachelors Degree (or Masters Degree)
 
Job Number: JG366614
Job Location: Anaheim, CA
Per Diem: No
Duration: 6+ months
Start Date: ASAP
Input Date: 04/04/2017
Last Updated: 04/17/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer

Description:
**Ability to obtain a secret clearance shortly after hire is required.**

Areas of Expertise Mechanical and Electrical Systems Yes Intermediate
Technical Skills Systems Analysis & Design Skills Yes Intermediate
Technical Skills Unigraphics Yes Intermediate

Engineer/Scientist 3 assigned to the Support Systems Mechanical Ground Support Equipment Sub Systems Team. The Mechanical Sub Systems Support Equipment (SE) Team is the team within the Support Equipment and Services organization that is responsible and accountable for defining, proposing, developing, delivering, and supporting high quality, affordable SE required at the Organizational and Intermediate maintenance levels to meet our various customer's needs and requirements. This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft. Candidates will be required to apply their knowledge of engineering principles, aircraft systems, aircrew operations, maintenance procedures, and manufacturing operations to define, support and improve system operability with emphasis on affordability. Successful candidates will be expected to learn quickly and become capable of independent function within the team in short order. Candidates will need to have strong Systems Engineering and Project Management skills. This position is a mix of technical project management and managing/overseeing delivery of Support Equipment end items. Candidates will be expected to have strong oral and written communication skills that will enable them to effectively interact with internal and external customers and suppliers as well as team members from multiple disciplines.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
Ability to define, specify, & evaluate mechanical ground support equipment requirements & architectures for adherence to company, customer, quality & regulatory requirements. Ability to create and manage schedules, as well as coordinate installation and delivery of equipment. Ability to translate functional requirements into designs/specifications and ultimately into fielded systems. Proficiency in oral and written communication is required. Must be highly motivated, self-starting and comfortable dealing with diverse people and disciplines. Previous experience in a multi-disciplined team environment, and frequent interaction with suppliers and customers is desired. Experience with mechanical ground support equipment and logistics (technical publications, provisioning, spares, etc) is desired.
 
Job Number: 25637-1
Job Location: MO
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 04/18/2017
Last Updated: 04/18/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designers - UGNX

Description:
* UGNX
*This team is responsible for sub systems mechanical support of aircraft, including Hydraulics, Auxiliary Power, Fuel systems, ECS, and all other mechanical interfaces with the aircraft.
*Mechanical and Electrical Systems
*Must be able to obtain secret clearance
 
Job Number: BO-MO-Mech
Job Location: St. Louis, MO
Rate: Neg.
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/18/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Optical Engineer

Description:
Optical Engineer

Location: Bothell, WA
Pay Rate: DOE ($56.20/hr - $58.50/hr)
Duration: 6+ month contract
Shift: First, 9/80
*Must be a U.S. citizen*

Description
• BS Degree in Optical Engineering, MS or higher preferred
• Experience working in an optical development lab
• Experience with fiber optic laser systems including fiber handling and splicing
• Experience designing and building free space optical diagnostic set ups
• Experience characterizing lasers

Skill/Experience/Education (Mandatory):
1. Must have 4-5 years’ experience in the design and build of Fiber Lasers.
2. Must have 4-5 years’ experience in Laser characterization.
3. Experience working in an optical development lab
4. Knowledge of optical principles
5. General familiarity with standard optical and electrical lab equipment
6. BS Degree in Optical Engineering, Physics or other Engineering degree with a concentration on optics, MS or higher preferred;
7. Optical Design: Ability to design an optical layout selecting the correct optical elements and positioning them correctly in the design. Use of fundamental principles of optics. (4-5 years)
8. Laser Engineering: Ability to design a laser system and characterize the resulting beam. (4-5 years)

Desired:
• Experience designing and building free space optical diagnostic set ups
• Optical Analysis: Ability to analyze an optical system using Zemax, Code 5 or similar software packages.
 
Job Number: 7146
Job Location: Bothell, WA
Rate: 56.20-58.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/22/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer / Electro-Deposition Plating

Description:
Process Engineer / Electro-Deposition Plating

Location: Canoga Park, CA
Rate: $50/hr - $55/hr
Duration: 1 Year Contract

** Candidates should have current experience with Electro-Deposition Plating **
** Local candidates preferred. If candidates pass a phone interview an in-person interview will be required. Must be able to attend an in-person interview at their own expense **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Applies engineering and quality procedures to support hardware requirements to assure that delivered products and/or services conform to contractual and Company requirements.
-Support the electro-deposition of development hardware to support critical program schedules.
-Select and position electrodes /anodes, part and assemblies in process tanks to apply plating on metallic components.
-Be able to hand prep (sand) and mask hardware to ensure plating process meets specification and drawing requirements.
-Plan proper grouping and positioning of material to assure treatment to specifications.
-Maintain plating bath composition, temperature, and concentration.
-Have a basic electrical knowledge of electrical circuitry – anodic/cathode – positive/negative.
-Ability to calculate surface areas and determine current density for hardware.
-Knowledge in electroforming - ability to design and fabricate plating cells, shielding, and anode placement.
-Have experience working with hazardous chemicals and acids.
-General tool knowledge of power tools and hand grinders.

Skills:
-Over 5 years of experience in plating metallic parts & assemblies.
-Experience working with hazardous chemicals, including acids.
-A proven safety record & experience with PPE used in plating.
-Basic electrical knowledge: electrical circuitry, positive/negative, anode/cathode placement, AC/DC power supplies, rectifiers.
-Experience preparing hardware surfaces for plating and fabrication/installation of tooling & shields to ensure parts meeting plating requirements.
-Over 10 years of experience in plating metallic parts is desired (not required).

Education:
-High School Diploma or equivalent required.
-BS in Chemistry or Materials desired.
 
Job Number: 7072
Job Location: Canoga Park, CA
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II - Electric Propulsion

Description:
Project Engineer II - Electric Propulsion

Location: Redmond, WA
Rate: $50.00 - $53.00/HR
1 year contract

** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **
** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **
** Candidates should have recent work experience **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Company is the premier supplier of these enabling propulsion systems.

- The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products.

- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.

The following is an approximate split of typical duties:
70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify company products are in compliance with customer requirements. Demonstrate to our customers that company is the best value supplier for their propulsion needs.
20% - Support proposal activities and manage internal research and development efforts as assigned.
10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions.

- Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.

Skills:
Required:
- At least 2 years work experience in an aerospace field, working on flight hardware.
- Must know MS Office programs.
- Must have minimum BS degree in mechanical or aerospace engineering.

Desired:
- Experience with electric propulsion devices, particularly hall thrusters or ion engines.
- Experience with testing flight hardware and production of flight hardware.


Education:
- A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required.
- A Master's degree or higher in an Engineering discipline or Physics is preferred.
- Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
 
Job Number: 6995
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 05/30/2017
Last Updated: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II - Propulsion / ** Candidates should have propulsion experience. Chemical propulsion, electrical propulsion, or plasma physics are acceptable ** URGENT WA

Description:
Job Title: Project Engineer II
Job Number: 158323/6312522
Location: Redmond, WA
Compensation: 53/hr
Assignment Length: 12 month contract

Description:


Duties:
** Candidates should have propulsion experience, chemical propulsion or electrical propulsion, which typically means mechanical engineering or aerospace engineering **



** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role **



** Candidates should have recent work experience **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is a Project Engineer role. It is NOT a Reliability Engineer, Structural Engineer or Electrical Engineer role ** ** Candidates should have recent work experience ** ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Aerojet is the premier supplier of these enabling propulsion systems. The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters. The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware. The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products. Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals. Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations. The following is an approximate split of typical duties: 70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet is the best value supplier for their propulsion needs. 20% - Support proposal activities and manage internal research and development efforts as assigned. 10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions. -Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.
Skills: Required: At least 2 years work experience in an aerospace field, working on flight hardware. Must know MS Office programs. Must have minimum BS degree in mechanical or aerospace engineering. Desired: Experience with electric propulsion devices, particularly hall thrusters or ion engines. Experience with testing flight hardware and production of flight hardware. Keywords: Electric propulsion Hall Thruster Ion thruster Arcjet
Keywords:
Education: A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required. A Master's degree or higher in an Engineering discipline or Physics is preferred. Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
# of Positions: 1

Location:
Redmond, WA
11411 139th Place NE,

Schedule:
Start Date: 02/20/2017
Estimated End Date: 02/20/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
Standard Schedule:
Schedule Notes: 9/80 Schedule. OT possible.
 
Job Number: MB-6312522
Job Location: Redmond, WA
Rate: 53/hr max
Duration: 12 month contract
Input Date: 04/11/2017
Last Updated: 05/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Quality Assurance Engineer - Level 2
Orlando, FL
1 Year Contract
$35.00-40.00/Hr

Description

Coordinates with Sourcing, Operations, Design Engineering, the Supply Base and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products. Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability. Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance. Facilitate technical trade-offs and standardization that may lead to more economical procurement. Recommends design changes to mitigate production issues. Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability. The candidate will be a member of the Supplier Quality Engineering Team responsible for assuring the quality and technical performance of deliverables from suppliers for LMSTAR and Training & Simulation Solutions programs based out of MST Orlando. The selected candidate must be a go-getter, willing to proactively tackle whatever it takes and be a team player to solve procurement, supplier related production, Test, Quality, Materials, FAI and Receiving issues. This individual will interface with Manufacturing Ops, MEs, Sourcing, Engineering, Suppliers, Integration/Test and Receiving personnel. Management and Operations. Responsibilities include reviewing and establishing Quality Text Clauses for material PRs/POs, verifying First Articles, Test Results and driving problem resolution. Responsible for basic quality services including: supplier capability and performance evaluations, verification of special processes, part acceptance planning, manufacturing process and quality plan review, defect analysis, timely root cause and corrective action implementation for affected products. Candidate will be required to use analysis to make recommendations on potential source selection decisions based on risk and historical performance. The success of the person in this position will greatly depend on his/her ability to interface well with multiple stakeholders, effectively work in a dynamic environment, have strong interpersonal skills, and be able to communicate with positive impact.



Skill/Experience/Education

Mandatory:

- Bachelors degree from an accredited college in a related technical discipline, or equivalent experience/combined education.
- Excellent written & oral communication skills; familiarity with defect analysis and root cause analysis methodologies; familiarity with ISO9001 & AS9100 quality management systems; familiarity with reading engineering drawings per ASME Y14.5; familiarity with GD&T (Geometric Dimensioning & Tolerancing; Engineering, IEEE Stds., Quality and/or Supply Chain Management discipline related experience.
- Must have ability to obtain a Secret security clearance

Desired:

Root Cause Analysis; FMEA / Design Qualification and/or FAI experience; Understanding of the Manufacturing Processes; Ability to work effectively in a cross-functional team environment. Knowledge of mechanical, electrical, and/or aerospace engineering and production processes preferred.
 
Job Number: 7006
Job Location: Orlando, FL
Rate: 35.00-40.00/Hr
Input Date: 04/18/2017
Last Updated: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
** Must either have a current Secret clearance or have had a Secret clearance in the last two years. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
** U.S. Citizens per client **
** Must be able to satisfy federal government requirements for access to government information.

Job Details
1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
3. Complete failure modes, effects, and criticality analysis and hazard analysis.
4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
7. Perform Probabilistic Risk Assessments.
8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
9. Embrace a continuous improvement mindset.
10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

Skills:
* Ability to perform FMEA is required
* Ability to perform statistical analysis is preferred
* Product reliability testing and modeling capability is preferred
* Proven competency in root cause analysis preferred
* Familiarization with spacecraft and/or launch vehicle systems is preferred
* Passion for advancing the commercial space industry and human spaceflight is preferred
* Excellent verbal and written communication skills are required
* Strong work ethic and drive to succeed are required
* Understanding and experience with electrical hardware is required. Experience with mechanical hardware is also required.

Education:
BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above. Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
 
Job Number: CA37657
Job Location: Canoga Park, CA
Rate: 70.00
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 04/13/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Title: Reliability Engineer
Location: Canoga Park, CA
Duration: 10+ months


Duties:
1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
3. Complete failure modes, effects, and criticality analysis and hazard analysis.
4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
7. Perform Probabilistic Risk Assessments.
8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
9. Embrace a continuous improvement mindset.
10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

Skills:

Ability to perform FMEA is required
Ability to perform statistical analysis is preferred
Product reliability testing and modeling capability is preferred
Proven competency in root cause analysis preferred
Familiarization with spacecraft and/or launch vehicle systems is preferred
Passion for advancing the commercial space industry and human spaceflight is preferred
Excellent verbal and written communication skills are required
Strong work ethic and drive to succeed are required
Understanding and experience with electrical hardware is required.
Experience with mechanical hardware is also required.
Ability to obtain a security clearance is required.
Education:


BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above.
Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
 
Job Number: KD366412
Job Location: Canoga Park, CA
Per Diem: No
Duration: 10+ months
Start Date: ASAP
Input Date: 04/04/2017
Last Updated: 04/17/2017
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer V

Description:
Reliability Engineer V

Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
6+ month contract

**Looking for candidates with expertise in Mechanical parts and some Electrical parts. This role focuses mainly on Mechanical parts. Must be knowledgeable in Reliability Predication Techniques as well as very strong in Probabilistic Reliability Assessments and Comparative Design Reliability Predictions. Candidates must also have a strong desire to interact with IPTs and hardware owners to understand their designs and to influence their designs (communication skills) **

**MUST be able to obtain a Secret Clearance**
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.
2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.
3. Complete failure modes, effects, and criticality analysis and hazard analysis.
4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.
5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results
6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.
7. Perform Probabilistic Risk Assessments.
8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.
9. Embrace a continuous improvement mindset.
10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.

Skills:
* Ability to perform FMEA is required
* Ability to perform statistical analysis is preferred
* Product reliability testing and modeling capability is preferred
* Proven competency in root cause analysis preferred
* Familiarization with spacecraft and/or launch vehicle systems is preferred
* Passion for advancing the commercial space industry and human spaceflight is preferred
* Excellent verbal and written communication skills are required
* Strong work ethic and drive to succeed are required
* Understanding and experience with electrical hardware is required.
* Experience with mechanical hardware is also required.
* Ability to obtain a security clearance is required.

Education:
- BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above.
- Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
 
Job Number: 7239
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 04/17/2017
Last Updated: 04/26/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer V CA

Description:
Job Title: Reliability Engineer V
Job Number: 159027/6813150
Location: Canoga Park, CA
Compensation: 80/hr DOE
Assignment Length: 10 month contract

Description:

Additional Information: Updated job description with the following:

** UPDATE: Looking for candidates with expertise in Mechanical parts and some Electrical parts. This role focuses mainly on Mechanical parts. Must be knowledgeable in Reliability Predication Techniques as well as very strong in Probabilistic Reliability Assessments and Comparative Design Reliability Predictions. Candidates must also have a strong desire to interact with IPTs and hardware owners to understand their designs and to influence their designs (communication skills) **


Duties:

** Candidates must be able to satisfy federal government requirements for access to government information. Permanent residents are NOT eligible for this role. Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT eligible **


1. Assist reliability and system safety engineers with ensuring technical excellence of group's products. This includes adequacy of the tools, techniques, and processes.

2. Develop reliability and safety models for various systems and communicate results to company engineers and managers.

3. Complete failure modes, effects, and criticality analysis and hazard analysis.

4. Evaluate engineering designs and operational plans to identify potential hazards and evaluate the adequacy of planned controls and verifications.

5. Provide design input to improve product reliability when necessary - Interacting with a wide variety of individuals and teams to communicate results

6. Design reliability test plans to qualify new product and processes, evaluate testing failures and ensure consistent adherence to high quality standards by application of reliability techniques.

7. Perform Probabilistic Risk Assessments.

8. Build a strong working relationship with the other employees to ensure that the group's capabilities are fully utilized and that the group's results are meeting customer needs.

9. Embrace a continuous improvement mindset.

10. Demonstrate a 100% commitment to quality in actions, decisions, and conversations.


Skills:

* Ability to perform FMEA is required
* Ability to perform statistical analysis is preferred
* Product reliability testing and modeling capability is preferred
* Proven competency in root cause analysis preferred
* Familiarization with spacecraft and/or launch vehicle systems is preferred
* Passion for advancing the commercial space industry and human spaceflight is preferred
* Excellent verbal and written communication skills are required
* Strong work ethic and drive to succeed are required
* Understanding and experience with electrical hardware is required. Experience with mechanical hardware is also required.
* Ability to obtain a security clearance is required.

Keywords:

Education: BS Engineering plus a minimum of 5 years of experience in the space industry related to the job description listed above. Equivalent qualifications, such as 10+ years of directly applicable work experience will be considered.
# of Positions: 1

Location:
Canoga Park, CA
8900 Desoto Ave
 
Job Number: MB-6813150
Job Location: Canoga Park, CA
Rate: 70-80/hr max
Duration: 10 month contract
Input Date: 04/24/2017
Last Updated: 05/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com