Job Search Results

366 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/16 Monday 10:47AM Pacific Time by ContractJobHunter. )

Listings 1 - 366

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Equipment Engineer - Contract

Description:
Aerospace Test Equipment Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Equipment Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydro mechanical aerospace components and systems for government and commercial applications.

Must be a US Citizen or US Person to be considered. No visa or student visa candidates condescended

This is a contract to hire position located in Torrance, CA. Customer is open to Contract- Long term contract or contract to hire.

Principal Responsibilities:

-Primarily in the field of Electrical Engineering with significant experience required in the areas of position control and power electronics and project management.

Project management, Test Equipment design, fabrication and verification are key experiences needed.

-Primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
-The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.- Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
-The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
-Responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design.
-Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
-The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

-Prior experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro- pneumatic servo-mechanisms used in testing products.
-In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor- degree in Mechanical Engineering or related field

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61747
Job Location: Rockford, IL Illinois
Rate: Market
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer Programmer

Description:
Position Description:

Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications.
Accountable for field engineering support to the Resort and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation.
Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes at the Resort.

Requirements:
• Controls Systems experience with 1-5+ years in the amusement park industry or industrial/manufacturing environment
• Ride element performance analysis: dynamic, kinematic, hydraulic and pneumatic analysis and calculations
• Knowledge gained by experience in the following:
Electronic control systems and signal processing, including familiarity with relays and programmable logic controllers
Electrical motor controls including variable frequency drives and soft starts
Variety of industrial automation PLC manufacturers
National and California Electrical Code
Nationally recognized Testing Laboratory certifications such as TUV, UL, etc.
AutoCAD o Object oriented programming
C and C++ programming
Ladder logic
Wiring and interconnect diagrams
ANSI, ASTM, and IEEE standards
• Excellent oral and written communication

Bachelor of Science in Electrical Engineering, Mechatronics, Electronics Engineering, or equivalent from an ABET accredited University.
 
Job Number: JO358752
Job Location: Anaheim, CA
Duration: 12 months+
Start Date: asap
Input Date: 01/12/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Location: Grand Prairie, TX
Max Pay Rate: $56/hr
Shift: 9/80
Duration: 1 Year Contract
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

Description:
-Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development.
-Determines architecture design, logic design, and system simulation.
-Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization.
-Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.

Skill/Experience/Education
Mandatory:
This company is seeking a Field Programmable Gate Array (FPGA) Design Engineer for a position in Grand Prairie, TX. Digital Design encompasses the full life cycle of electronic subsystems development. As such, the FPGA Design Engineer will be responsible for: Development, integration and test of processor subsystem features and interfaces in FPGA hardware.
- Synopsis Synplify: 6+ years of experience
- Synopsis VCS: 6+ years of experience

Desired:
Requirements development; FPGA code development; Test bench development; Verification; Synthesis; Timing analysis; Unit test; Support of debug and system integration activities; Task estimation; Design trade studies; Interface definitions; Architecture definition; Schematic entry; Circuit card physical layout; Manufacturing oversight
 
Job Number: 6790
Job Location: Grand Prairie, TX
Rate: 56.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 03/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II with active secret / Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool / digital electronics and high speed PCB design CA

Description:
Job Title: Electrical Engineer II
Job Number: 157889/6535771
Location: El Segundo, CA
Compensation: 50/hr
Assignment Length: 12 month contract
Active secret required to start

Description:


The Secure Information Systems organization currently has a need for a Sr. Electrical Engineer to design and develop digital hardware for embedded applications. The successful candidate will be responsible for all aspects of the hardware design, including: developing requirements, detailed design, schematic entry, circuit analysis, design documentation, conducting design reviews all the way through hands-on lab testing, debug and integration. Responsibilities will also include preparing and conducting design reviews and being responsible for adhering to allocated budget and project schedule.

Required Skills:

6+ years of experience in the field of Electrical Engineering
Candidate will have a solid background in digital electronics and high speed PCB design
Must be well versed in both Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool
Have hands-on lab debug experience utilizing oscilloscopes, logic analyzers and general lab equipment and able to debug hardware/software embedded applications
Must be have prior experience developing and integrating embedded hardware platforms utilizing ARM based microprocessors and FPGAs
Experience in product development and design for manufacturing
Strong communication skills, both written and oral
Active DoD Secret Clearance
U.S. Citizenship is a requirement

Desired Skills:

Experience with Mentor DxDesigner schematic entry
Experience with Hyperlynx Signal Integrity (SI) analysis
Experience with Xilinx and Altera FPGA embedment, and ability to read and write VHDL programming language
Familiar with Earned Value Management (EVM), IMS development and proposal development process and be able to assist in the formulation of hardware bids for proposals
Familiarity with basic knowledge of cryptography and secure hardware design

Required Education:
B.S./B.A. Electrical Engineering
 
Job Number: MB-6535771
Job Location: El Segundo, CA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 01/09/2017
Last Updated: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr / FPGA Design Engineer TX

Description:
Job Title: Electrical Engineer Sr
Job Number: 157130/1164
Location: Dallas, TX
Compensation: 60/hr
Assignment Length: 12 month contract
No clearance
Non exempt




Description
FPGA Design Engineer. Lockheed Martin Missiles and Fire Control is looking for a Field Programmable Gate Array (FPGA) Design Engineer in Grand Prairie, TX. Digital Design encompasses the full life cycle of electronic subsystems development. As such, the FPGA Design Engineer will be responsible for development, integration and test of processor subsystem features and interfaces in FPGA hardware. Tasks include requirements development, FPGA code development, test bench development, verification, synthesis, timing analysis, unit test, and support of debug and system integration activities. Additional responsibilities include task estimation, design trade studies, interface definitions, architecture definition, schematic entry, circuit card physical layout and manufacturing oversight.

Skill/Experience/Education
Mandatory:

Bachelor’s degree or higher in Electrical Engineering with a concentration in FPGA design and Digital Signal Processing through either coursework or relevant experience. Good oral, written communication and presentation skills to interface with subordinates, peers, supervisors and customers are required. Experience with VHDL, Verilog, or System Verilog languages is required. Position requires excellent testing and troubleshooting skills. Proficiency with electronic analyzers and other test equipment is required.
Desired:

Experience with Synopsis Synplify, Synopsis VCS, ChipScope tool sets is desired. Experience with Xilinx and Altera Part family internal FPGA fabric, IP, and model based compilers desired. Previous experience related to military/aerospace design techniques is desired.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
FPGA Verification 4-5 Years Yes
 
Job Number: DW-1164
Job Location: Dallas, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 02/21/2017
Last Updated: 02/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Avionics Systems Design & Analysis Engineer (MO)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The F-15 Integration team is seeking an avionics integration engineer to support integration of new CNI avionics equipment into the F-15 architecture. Specifically, we have a new Signal Interface Unit (SIU) and MIDS JTRS data link equipment which needs to be integrated. This engineer will be responsible for running line item team meetings for each configuration change. This person will also be responsible for defining all Pilot Vehicle Interface (PVI) changes, including interaction with Boeing and USAF aircrews. The applicant will work on all aspects of system and subsystem requirements development, including software requirements, laboratory test requirements, laboratory test support and flight test support. Technical writing to support Technical Publication development and aircrew training will also be required. Previous experience with avionics integration, design or test and project team participation is required. Previous experience with the DOORS requirements management tool is desired. Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEmo
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/27/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer III (OH)

Description:
Electrical Design and Analysis Engineer Assignment - Level 3 – Skill Code: 676-Digital and Analog Circuits Analysis:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Additionally…
Candidate needs to have reliability analysis experience.

Must be able to obtain Secret Clearance shortly after start date--all candidates are welcome to apply with or without prior Clearance.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: EEoh
Job Location: Heath, OH
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/02/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer V (CA) - Digital / Analog

Description:
Architect, design, and develop high-speed communications modem hardware. Responsible for ensuring requirement flow down during design, checking work product for quality, and performing requirement verification during integration and conduct sell-off. Be part of and lead team of board, subsystem, and FPGA designers.

Architect, design, and develop Single board computer/Communication network hardware - Switches, Servers, Network Attached Storage (NAS). Responsible for ensuring requirement flow down during design, checking work product for quality, and performing requirement verification during integration and conduct sell-off.

BSEE, MSEE, or PhD from an accredited course of study, in electrical engineering or computer engineering with more than 15 years of industry experience developing high-speed communication modems AND/OR communication network equipment - switches, routers, servers, network attached storage.

Must be expert in either: 1) ADC/DACs, signal processing algorithms, electrical board design, unit design, requirement decomposition, hardware specification, architecture, implementation, verification, integration and test or 2)
sbc, network communication hardware architecture, development using the following: Intel /ARM Ax processors, SSD SATA controller, high capacity NAND Flash, SSD SATA, Raid Controller, DDR4, GbE controller, GbE switch, 10/100/1000 Base-T GbE Transceiver, GigE controller, POE PSE

We also offer full medical, dental, vision, and 401k, including a bonus plan.

We can also give you the per diem split if you qualify.
 
Job Number: ElectCA
Job Location: El Segundo, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 2+ Months
Start Date: ASAP
Input Date: 12/07/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Fabricators / EMI Harness Technicians

Description:
1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

Skills/Experience
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

Other Requirements:
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
 
Job Number: 353185
Job Location: Stratford, CT.
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year +
Start Date: ASAP
Input Date: 11/21/2016
Last Updated: 02/14/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III (MO)

Description:
• Maintaining the EFHD operational and performance requirements in the Procurement Specification (PS).
• Overseeing supplier analysis and allocation of the PS requirements into the final EFHD design.
• Overseeing completion of the supplier design and development activity for EFHD which includes completion of supplier qualification testing.
• Overseeing Boeing integration testing of the EFHD capability. This will include reviewing test procedures and conducting testing in the Boeing Electronic System Integration Laboratory.
• Overseeing the completion of flight test of EFHD. This will include coordinating flight test plans, reviewing test procedures, analyzing results, and coordinating actions with the supplier.
• Overseeing the transition of EFHD to a production phase. This will include support for closing out conducting a Functional Configuration Audit (FCA), Physical Configuration Audit (PCA), First Article Inspection (FAI), and Production Readiness Review (PRR).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEmo
Job Location: Berkeley, MO
Rate: up to $45/hour
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Assembly Technician

Description:
Job Description:
- Recognize the methods/sequences of assembly that are needed when complete information is not readily available and the appropriate action to be taken
- Work from drawings, diagrams, and written instructions. Use hand and power tools to build, disassemble, modify, rework, reassemble and test circuit card assemblies (CCA) as required
- Perform quality inspections and continuity checks on completed units
- Bonding, staking, torquing, and tinning of electronics components
- Complete all documentation related to work performed as required
- Requires minimal supervision on routine tasks
- Rework CCA's, remove conformal coating, unsolder Hybrid IC leads, and use Lead forming tooling on complex assemblies
- Assemble magnetics - Participate in area and shift rotations
- Follow applicable SS/L policies and procedures. Familiar with ISO 9000 Policies
Ability to work any shift on a flexible schedule if required

Requirements:
- 2 years technical training or equivalent experience
- Obtain NASA Solder Certification
- 2 years of experience performing non-standard rework on 'flight' hardware.
- Experience using a computer for entering data and using the internet
- Proficient using standard assembly tools: cutters, crimpers, soldering irons, pin insertion/removal tools, and torque tools
- Recent experience soldering under a microscope High School or equivalent
 
Job Location: Palo Alto, CA
Rate: Open
Duration: 3 - 6 months
Start Date: ASAP
Input Date: 11/14/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer CA

Description:
Job Title: Electronics Systems Engineer
Job Number: 157691/4392
Location: Torrance, CA
Compensation: 50/hr
Assignment Length: 6 month contract

Description:

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning

• Meeting demanding performance requirements
• Designing safety critical systems
• Delivering systems that will perform to expectations in harsh environments
Essential job functions: • Create block diagrams and definition of redundancies and system attributes to support performance safety requirements.
• System box level architecture for all electronics requirements, environmental testing, verification metrics.
• Interfacing with the customer and negotiation and clarification of requirements during PDR/CDR.
• Integration testing and test support during qualification and certification
• Preparing requirement compliance metrics
• Act as a Project Manger for System Design portion of electronics development
Required skills: • Ability to write clear and simple specification (DOORS)
• Avionics experience required (Flight Control preferred)
• Integration, test and qualification of electronic hardware
• DO254 and ARP4754A guidelines and review process
• Defining redundant systems to meet safety requirements
• DO160 is a plus (Environmental & EMI/EMC)
• Test Requirement for Test Equipment
• Box level ATP generation
• Box level Hardware/SW integration
• Leadership skills - and Project Management experience
Scope:
Education: • BSEE - 5 - 10 years of experience
 
Job Number: MB-4392
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 12/13/2016
Last Updated: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III

Description:
JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

Job Description:
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

Education:
Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
 
Job Location: Irvine, CA
Rate: Open
Per Diem: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 10/26/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Software 3 with active secret OK

Description:
Engineer Software 3 (Job Number: 16019810)

Number of Openings: 1

Location(s): United States-Oklahoma-Oklahoma City


Shift: 1st Shift

Target Start Date: Oct 31, 2016

Rate: $55-$65/hr.

Location: Oklahoma City, OK

Duration: 1 Year (or less if assignment completes early)

Work Week: 9/80a

Clearance: Interim Clearance required

Engineer Software - 3 (3)

Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters

Experience with real-time, embedded software environment; Hands-on knowledge of Green Hills Integrity Operating System, Board Support Packages and Device Drivers; Multi-Threaded, RTI DDS software expertise are also required. .


Candidate must possess an Interim Secret Clearance prior to start date
 
Job Number: MB-16019810
Job Location: Oklahoma City, OK
Rate: 65/hr max
Duration: 12 month contract
Input Date: 12/29/2016
Last Updated: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Experimental Aeromechanics - RM

Description:
JSG is seeking an Experimental Aeromechanics for a 12+ months contract opportunity in Stratford, CT!

Job Duties:

Layup of multi-layer composites, consisting of fiberglass and graphite, with other materials as required
Composite testing specimens using Engineering Standard Work
Provide for integration into the value stream for test specimen requirements within the fabrication process, along with R&D development projects.
Dressing materials to the designated sizes, with support for static testing to define the material properties for Engineering.
Provide written comments for peer review prior to test specimen preparation and planning.
Process EWR's using machining skill set, while identifying the necessary activities related to quality machining.
Skills & Experience Required

5 + years’ relevant experience required.
Ability to perform adhesive mixing, composite layup and curing Ability to read and interpret drawings in both hard copy and electronic form
Provide a high level of attention to details for assembly of parts, including measurements with precision devices to high accuracy of 0.0001
Ability to work independently with a high level of self-direction and competency.
Ability to assemble complex composite assemblies related to rotorcraft, with an understanding to form, fit and function, while interacting with designers and test engineers on interferences and improved features
Ability to document the tasks performed with a clear understanding to traceability, allowing changes in data and drawings to be revised
Other Requirements:

Flexibility to perform work within any given shift such as lifting of calibration weights, multiple climbing of stairs.
Test related overtime
Travel extending several weeks for offsite testing is required.
Required hours are based on work task varying needs. Research level interactive process development with Engineers, and team worker, taking or giving direction Technician should be self - motivated, ethical for working hours charged, and demonstrates insight.
 
Job Number: 353695
Job Location: Stratford, CT
Rate: $38hr
Per Diem: yes
Overtime: yes
Duration: 12 month
Start Date: asap
Input Date: 12/20/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F-15 Combat Aircraft Training Specialist IV (MO)

Description:
Develops, delivers and conducts customer training events for combat specific trainees via highly interactive courseware in state of the art electronic classrooms and simulator training devices at company and/or customer facilities. Provides input for developing and modifying engineering data, flight manuals, defining training requirements, standards and curriculum, schedules and related documentation. Pursues continuous process improvement. Serves as training liaison with internal and external customers. Demonstrates extensive knowledge of combat aircraft aircrew operations and training to resolve complex planning, coordination and development of requirements for multiple aircraft blocks, types and models. Oversees all phases of combat aircraft ground training delivery. Evaluates technical design features/changes to the operation of the combat aircraft systems and subsystems to assist the development of the physical/functional fidelity requirements to be incorporated into the applicable flight training devices. Participates and interfaces with operational level combat aircraft customers, customer test aircrews, company test aircrews and company engineering expertise via Technical Interface Meetings; Man-Machine Interface Meetings; Program Management Reviews, Program Design Reviews, and status meetings.

Experience as a Pilot or Weapons System Operator in the F-15E/K/S/SG/C is required. Requires minimum of 5 years’ experience as a high performance fighter/attack aircrew with appropriate experience as Wingman, Element Lead, Flight Lead, Instructor Pilot, Weapons System Operator; Flight Examiner, Mission Commander or Pilot in Command. Platform instruction experience is required. Strong communication skills, and experience with Microsoft Office Products is a plus. Must be willing to travel for short term assignments. Must have a US SECRET clearance or be able to obtain one.
 
Job Number: F15MO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/22/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
This is a senior technical position associated with the design, development and integration of complex electronic flight control systems. An emphasis on digital control systems, Control Law design, sensors, reliability, and safety analysis applicable to flight vehicles should be in the successful candidate's background. Familiarity with analog circuit design and analysis is also desired.

TASKS INCLUDE
- Aircraft System Specification Analysis
- Flight Control System Specification Development
- Requirements allocation to Component
- Control System/CLAW Detailed Design
- System Integration and Verification Evaluation
 
Job Number: 16-506-28661
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer - RM

Description:
Johnson Service Group is seeking a Flight Control Engineer for our client in Stratford, CT!

Job Description:

Support the design and test of electronic flight control systems.
Experience with Mat Lab, Doors, and Engineer Test Procedures is required. Individual should be able to develop flight control algorithms utilizing Mat Lab toolset

Duration: 2-year Contract
 
Job Number: 352693
Job Location: Stratford, CT
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/16/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Richard Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineers - Secret

Description:
**Must have Active Secret Clearance
Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.
Aircraft maintenance experience at a supervisor level.
Experience in Fault Isolation.

Desired Skills: Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
 
Job Number: Lock-Flight Test
Job Location: Patuxent River, MD
Rate: $40.00-$50.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/06/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test with active secret MD

Description:
Lockheed Martin Aero 0322
Job Title: Flight Test
Location: PAX River, MD 20670
Compensation: 40-50/hr (DOE)
Assignment Length: 10 + month contract
Security Clearance Secret (Prime Contract:N00019-02-C-3002, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
Non Exempt
3rd Shift

Description:

Flight Test Control Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland. The successful applicant will provide Flight Test Ground and Flight Operations engineering support.

Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.

Position is responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.

Skill/Experience/Education
Mandatory:

Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.Aircraft maintenance experience at a supervisor level.

Experience in Fault Isolation.

Demonstrated Verbal and Written Communication skills across all levels of management. Ability to travel as required.

Desired:

Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
 
Job Number: SW-0322
Job Location: Pax River, MD
Rate: 40-50/hr DOE
Duration: 10 months +
Input Date: 01/11/2017
Last Updated: 01/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ITC Professional

Description:
POSITION ROLES AND RESPONSIBILITIES
The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in Sikorskys PLM systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services. Interact Daily with Engineering, Operations, Purchasing and SAS to address J&C items. Mandatory Skills:
Employee must have technical/engineering experience (Avionics, Electrical, Propulsion, Chemical Airframe, Publications, and Training)
Employee must have export compliance (ITAR\EAR) experience
Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
Nice to Have Skills:
Knowledge of Sikorsky's MATRIX-ONE, ERC Engineering Drawings and Specifications
Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful
Skills Required:
Employee must have technical/engineering experience
Knowledge in the area of export compliance a plus.
Knowledge of Sikorsky's MATRIX-ONE, Electronic Record Center (ERC), Engineering Drawings and Specifications would be beneficial.
Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful.

EDUCATION
Bachelor of Science
 
Job Number: 16-513-27891
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/31/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III

Description:
OCCUPATIONAL SUMMARY
Provide support to leads and operators in the assembly and/or fabrication areas. Provide information and support for process improvement. Plan, structure and implement manufacturing programs.
Support manufacturing assembly and fabrication to trouble shoot both assembly and fabrication problems. This requires close interaction with assembly personnel, fabrication personnel, and their supervision. Must support all lean manufacturing improvements and may require participation in lean improvement activities. Must also work closely with Quality Assurance, Program Management, Engineering, and shop Managers to resolve quality issues, increase productivity, and eliminate ergonomic problems.

AN INDUSTRIAL ENGINEER III MUST EXHIBIT THE FOLLOWING CHARACTERISTICS
A documented history of supporting manufacturing fabrication and assembly departments in identifying and resolving production problems and issues.
Demonstrates the ability to facilitate continuous improvement in the production process.
Must be experienced in interacting closely with personnel at all levels of the manufacturing system, including supervision and management.
Must be able to assume a leadership position in regard to Lean Manufacturing improvement projects, and exhibit a record of actively supporting past projects.
Must be capable of interacting regularly and cooperatively with Quality Assurance, Program Management, Engineering, and Production Management to resolve quality, productivity, ergonomic and safety issues.
Must be capable of initiating improvement projects resulting in labor, material, space, manpower, and/or other measurable cost reductions.
Must have a working knowledge of current 6S factory practices
Should be familiar with company policies regarding worker safety and have demonstrated the ability to identify and resolve safety issues in the workplace.
Knowledgeable of Life Safety Code as it applies to manufacturing layouts.
Must have demonstrated above average capability for developing engineering analysis.
Must have knowledge of basic material handling principles and products
Must be capable of developing special projects that are reviewed at the Zodiac level.
Uses statistics as a normal tool for resolving issues.
Leads or assists process improvement teams.

DUTIES AND RESPONSIBILITIES
Provide support to leads and operators in the assembly and fabrication areas.
Analyze parts and seat flow.
Conducts labor and machine time studies, operator work and motion studies, material and work flow studies in order to suggest and implement more economical and efficient manufacturing practices. Uses gathered data to establish and publish Standard Labor and Machine Data, and to calculate manpower and machine requirements.
Balance the lines or cells and implement procedures and/or operator instructions to support process improvement.
Participate to the implementation of structure and plan manufacturing programs (Lean Manufacturing, Set-up Reduction, 6S, Cost Reduction).
Apply statistical data analysis in normal duty activities.
Measures, analyzes, and adjusts Factory Floor Layout to achieve optimum manufacturing productivity as directed by Lean Manufacturing practices, subject to managerial approval.
Design of major layouts with product flow, material handling considerations, and infrastructure provisions.
Creates and documents Standard Work Instructions for use by factory personnel, in compliance with design and quality specifications and FAA directives
Participates in training shop personnel in new and/or updated processes, including Lean Manufacturing practices and improvement implementations.
Introduces new production processes and equipment.
Participate on concurrent engineering teams and verify adequacy/optimization of design in regard to weight and cost restrictions.
Collaborates with engineering design personnel to influence product design and thus provides for good production methods and economical tooling.
Analyzes engineering design documents, prototypes and/or engineering change orders and determines if an assembly or fabricated part can be manufactured. Communicates back to engineering and/or R&D to discuss needed changes.
Reviews and approves new and revised engineering drawings through the drawing release system.
Reviews changes in engineering design, planning, tooling, and NC programming to determine impact on current processes, methods and work instructions. Follows through with updating standard data and standard work instructions per such changes.
Investigates serious or recurrent production difficulties and delays due to such factors as faulty methods, tooling, operational sequences, or inadequate facilities or layouts.
Frequently contacts supervisory and non-supervisory personnel in engineering, production planning, tool design and other departments for the purpose of discussing production problems in order to secure necessary information or consider factors which may interfere with the effectiveness of production. Takes preventive or corrective action to remedy the problem or refer it to others who may be more directly responsible.
Develops new ideas and methods, and recommends changes in existing tooling to secure the most economical production. Submits cost reduction ideas.
Continuously analyzes current processes, tooling and methods in the factory for labor and/or cost reduction opportunities. Documents such opportunities and submits suggestions for managerial approval. Implements all approved suggestions. Investigates new manufacturing processes and plans implementation, including acquisition of new equipment and/or facilities.
Completes all assignments aimed at determining optimal methods and processes for manufacturing designated company products.
Establishes and maintains interaction with outside vendors with a view to improvement opportunities relating to equipment and processes. Makes investigative visits to such vendors when required.
Cooperates with Safety and Health personnel to optimize factory safety conditions, and with Energy personnel to monitor and optimize energy and fuel usage within the facility.
Manages significant cost capital projects including identification of equipment, justification of capital, and ensures schedule and installation is per plan.
Uses published Master Schedule and Production Requirements data to develop manufacturing capacity analyses for all of the manufacturing departments and work centers involved in meeting the Production Plan. Regular electronic reports will be presented to upper management for determining actions for solving any capacity issues.
Prepares regular Manpower reports to relay information regarding manufacturing departments or work centers that are in need of employee and/or equipment adjustments.
Prepares Manpower/Capacity/Forecast reports for aircraft manufacturers (i.e. Boeing, Airbus, etc.) to relay the companys production capability to manage future commitments.
Maintains a current electronic listing of all active manufacturing work centers.
Makes regular oral and written reports and/or presentations to supervisory and managerial personnel on any of the above activities.

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
Requires sufficient training to permit ready comprehension of problems having to do with production methods and facilities.
Must be capable of preparing well-written and orderly reports.
Must have sufficient knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, space layout, handling equipment, production machinery and equipment, NC machinery and equipment, factory methods work, etc.
Must have knowledge of trigonometry, algebra and statistics.
Must be proficient in inventory management, product data management, monitoring production control and cost, and in manufacturing resource planning.
Strong knowledge of motion and time study principles
Knowledge and experience in Lean Manufacturing.
Strong PC skills, knowledge of all Microsoft software
Able to lead teams of people towards focused and defined objectives
Strong Working knowledge of AutoCad
Strong knowledge of motion and time study principles

EDUCATION AND/OR EXPERIENCE
MUST HAVE ONE OF THE FOLLOWING
Must have a B.S degree in a related technical field (e.g.: IE, ME, EE) or an Associate degree with 3 years related experience or 6 years of job related experience.
Additionally 12 years of manufacturing/industrial engineering experience.
State registered professional engineers license in BSME, BSMfgE, BSEE, or BSIE and twelve (12) years of manufacturing experience.

COMMUNICATION SKILLS
Strong leadership and communication skills. Ability to communicate with all levels of management, peers, operators and customers. Must have the ability to generate written communication and to operate required office equipment. Must be able to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
Must be capable of communicating electronically via email. Must have working knowledge of Excel, Word, PowerPoint and other applicable computer softwares.

REASONING ABILITY
Ability to think strategically and resolve problems. Must be able to make decisions. Must be able to interface with other departments and vendors.

PHYSICAL DEMANDS
This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
 
Job Number: 16-611-7927
Job Location: South-central
Rate: $70K to $90K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 01/31/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - Level 1 - Active Secret Clearance

Description:
ACTIVE CLEARANCE ONLY!!!!!
This is a 1st shift position. Work shift is Monday to Friday 8 hours per day. Primary inspection of kits and shipments. Secondary role will be mechanical part inspection. Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.


Mandatory Skills:
Clearance Required. Mechanical inspection experience of complex machined parts, sheet metal parts, paint and stencil marking.


Desired Skills:
SOFCLS contract experience Strong and proven communication skills – written and verbal Proficient in Microsoft Office (e.g. Word, Excel, PowerPoint)

Skill Matrix
Mechanical inspection 4-5 years
Kit and shipping inspection 4-5 years
 
Job Location: Lexington, KY
Rate: 23-26/hr
Duration: 6 months
Input Date: 01/09/2017
Last Updated: 01/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jung Bahk
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Technician

Description:
Overview:
The Instrumentation Technician will provide technical expertise is the areas of instrumentation and data acquisition hardware in support of our launch vehicles and spacecraft.Responsibilities:

• Performs complex technical assignments involving instrumentation and data acquisition/processing systems
• Maintain, calibrate, configure, monitor, test, troubleshoot, install, and repair instrumentation, process controls, data acquisition systems, and electrical systems
• Investigate, diagnose, correct, and document instrumentation or system malfunctions
• Analyze results of calibrations and processed data and assist in the interpretation of test data
• Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments• Adjust, repair, or replace faulty components of test setups and equipment
• Complete necessary instrumentation of test stands, wiring, and data acquisition systems
• Lay out, build, test, troubleshoot, repair, and modify developmental and production electrical and electronic units, assemblies, components, parts, equipment, and systems
• Configure the data acquisition hardware• Connect and verify pressure transducers, thermocouples, and other sensors
• Install connectors, connector pins, terminals, and lugs
• Perform continuity checks, locate and correct wiring errors using measuring instruments such as ohmmeters and sequential continuity checkers
• Adjusts, calibrates, aligns, and modifies circuitry and components and records effects on unit performance
• Read and interpret planning documents, schematics, wiring diagrams, specifications, drawings, manuals, blueprints, and engineering sketches
• Perform lay out and wiring of electrical panels• Collaborate with design engineers to troubleshoot failures and issues derived from test data
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environmentBasic

Qualifications:
• High School Diploma or GED
• A minimum of 3 years of experience working with any of the following instrumentation: Resistance Temperature Devices (RTDs), thermocouples, strain gages, load cells, displacement transducers, pressure transducersPreferred Skills and Experience:
• Basic knowledge of Wheatstone bridge theory, ability to apply ohms law, and an understanding of DC electronics
• Associate’s Degree in Instrumentation, Control Technology, Electrical Systems, or other related field
• Operational knowledge of an oscilloscope & multi-meter, soldering wires & connectors, operation of various crimping tools, wire stripping, ohm’s law, continuity testing, pinning out a military type connector, routing & tie wrapping cables, drilling & tapping holes, and building junction boxes
• System level trouble-shooting skills and the ability to logically solve instrumentation system problems and determine corrective action
• Knowledge in signal conditioning concepts for various types of sensors, to include the following: Thermocouple Types K,S, and E; TC bonding concepts: resistance weld on and adhesive bond on types; TC probes through thermowell sheaths; Cold Junction compensation concepts
• Background should include experience with the following devices: DC power supplies; DC-DC convertors; UPS installations; Heat shrink tubing, cable harnessing, lacing, and proper strain relief concepts
• Working knowledge of transducers, operational amplifiers, and the knowledge of measurement techniques for temperature, pressure, flow, displacement, vibration and the application strain gages are also highly desired. Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications
• Working knowledge multiple bus architectures (PCI/PCIe, PXI/PXIe, GPIB, Serial, USB, etc.) and data communication technologies• Demonstrated capabilities in the development of comprehensive project plans that include all tasks; stage/gate milestones, and reviews necessary to successfully develop and implement solutions
• Intermediate skill level using Windows Operating Systems
• Intermediate skill level using Microsoft Office (Excel, PowerPoint, Word, Outlook, OneNote)
• Knowledge in Data Acquisition concepts, hardware, and interfacing (SCXI and PXI based)

Additional Requirements:
• General physical fitness is required for some work areas, flight hardware typically is built in tight quarters and physical dexterity is required, also the ability to lift heavy objects is required in this position ?50lbs
• Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
• Ability to work at elevated heights
• Typically exposed to work in extreme outdoor environments – heat, cold, rain
• Work performed in an environment requiring exposure to fumes, odors, and noise• Must be available for overtime and weekends
• Valid Driver’s License, and a clean driving record
 
Job Location: Vandeburg, CA
Per Diem: Possible
Duration: 3-4 months
Start Date: ASAP
Input Date: 11/21/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 09/09/2016
Last Updated: 07/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technician II

Description:
Manufacturing Technician II

Location: Burnsville, MN
Pay Rate - $25 – 35/hr
1 year contract
2nd Shift Monday-Thursday 3:00pm - 1:30am

Technical Tasks
Perform technical tasks based on written or verbal instructions. Utilize technical assets.
-Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
-Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
-Participate on and/or lead project teams.
-Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
-Structure modifications to programs w/ Visual Basic or other SW packages/programs preferred.
-Design simple circuits, fixtures, or mechanical parts.
-Develop software programs to run NC machines.
-Provide technical solutions to engineering.
-Participate on safety initiatives.

Manufacturing Activities
Support manufacturing activities through the resolution of production problems, fabrication of complex hardware, equipment and training.
-Self-manage work flow throughout area with minimal guidance, to achieve team goals.
-Estimate labor, material, and manufacturing costs for the building and repair of product or process enhancement.
-Identify and correct minor process, material, design, or equipment problems
-Actively participate in material review activities including troubleshooting of non-conformances.
-Perform mid-level (moderately complex) testing or mechanical operations on production/repair hardware including troubleshooting to component level.
-Provide skill specific training to improve technique and/or understanding of theory of operation.
-Fabricate complex equipment, hardware or prototypes.

Documentation
Provide accurate recording of time changes, test data. Parts usage, etc. This requires data interpretation.
-Generate reports from test results and communicate results or take immediate corrective action to assure proper disposition of items in question.
-Write test procedures and manufacturing work instruction for complex or detailed assembly or test operations.
-Utilize multiple databases to create/use necessary information to provide information for decision making requiring judgment.

Minimum Education Requirement:
Associate’s/Technical Degree
 
Job Number: 6853
Job Location: Burnsville, MN
Rate: $25.00 - $35.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 01/11/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
•Provides direction to manufacturing, test, subcontracts staff or technician staff.
•Supports the coordination all activities between design engineering, QA, procurement, program office, planning, configuration management, vendor and customer.
•Ensures design and procurement documents are in place to support procurement of component.
•Documents findings and implements solutions and communicates results to engineering staff.
•Assists the engineering staff in the analysis, investigation, and solution of routine engineering problems of limited scope related to small project(s) or to phase(s) of larger project(s), normally outlined in terms of task-related activities with detailed instructions.
•Performs functional testing of equipment and systems in assigned area by utilizing standard engineering and scientific principles.
•Documents findings and implemented solutions, and communicates results to project engineering staff.
•Obtains and compiles test data related to modeling and analysis.
•Requires making brief technical presentations to project staff.
•Advises management/engineering staff and the program office of the status of work in progress, material availability, and potential design/production problems to ensure that personnel, equipment, materials and services are provided as needed.
•Works with manufacturing engineering and project management to resolve any design related issue impacting production and to improve product design.
•Perform root-cause failure analysis, requirements verification, develops failure tree & troubleshooting steps by utilizing standard engineering practices and scientific principles.
•Represent the organization in technical review boards and customer meetings, as a member of the engineering project subsystem, providing solutions/status to technical issues associated with specific projects.
•Performs review, approval, presentation and the tracking of engineering change request and assemblies manufactured for the functional test, with emphasis to the respective engineering project subsystem.
•Assesses any given Incident Report (IR) due to a failure of a Unit Under Test (UUT), develops a Plan of Action and Milestone (POA&M) and supports the Failure Reporting and Corrective Action System (FRACAS).
•Completes and reviews required documentation to disposition any equipment or system as a Unite Under Test (UUT), provides technical presentation before the customer as required and makes sure the engineers supporting the IPT or engineering project subsystem team are verbatim compliant with the process as required.
•Provide direction and task activities to engineer staff under the IPT or engineering project subsystem
•Provides disposition to Supplier Disposition Requests (SDR)/ Non-Conformances (NR) and others, due to manufacturing requests for information, request for design change or non-conformances on the parts being made.
•Provides technical evaluations to support procurement decisions.
•Supports and resolves issues and problems at the test site to support test schedule.
•Develops procurement documents and specifications, Statement of Work (SOW) documents and proposals support for engineered components and assemblies.
•Performs other duties as assigned or required.


An EIT (Engineer in Training) certificate or PE (Professional Engineer) license are desirable

•Familiar with ANSYS, NASGRO, AutoCAD, MatLab and MathCAD is desirable
•U.S. Navy program acquisition, shipbuilding, ship design, construction and component engineering experience is desirable
•Electrical/Electronic design experience is desired
•Production and fabrication experience is a plus
•Machine design experience is a plus

Requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
 
Job Number: 161388
Job Location: Rancho Bernardo, CA
Rate: $43.00
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 01/08/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III

Description:
Seeking a Mechanical Engineer III for an opening in Anaheim, CA.

RESPONSIBILITIES:
Under general supervision, the Mechanical Engineer III is responsible for the mechanical layout and packaging of power conversion equipment and other Navy based electronic systems. This person generates equipment layouts that satisfy system requirements and account for tradeoffs among thermal, mass properties, structural and manufacturing considerations.

1.Interprets customer specifications to define requirements for mechanical designs.
2.Applies the Inventor 3D CAD system to create mechanical layouts and drawings.
3.Develops detailed fabrication and assembly drawings and performs tolerances analysis.
4.Designs interconnecting brackets and support structure between components and subsystems.
5.Supports other mechanical engineers and drafters in conceptual design and preparation of mechanical drawings.
6.Generates project cost estimates and selects components for various designs.
7.Performs thermal and structural analyses under the guidance of lead mechanical engineers.
8.Generates engineering design change orders and performs checking work.
9.Responsible for project budget/schedule adherence.
10.Uses established and well defined engineering procedures.
11.Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
12.Able to work simultaneously on a variety of projects.
13.Takes directions from project engineer or department manager.

REQUIRED EXPERIENCE:
Bachelor of Science degree in Mechanical Engineering from four-year college or university. Must have at least 5 years of experience in mechanical design and engineering.

1.Practical experience with 3-D CAD and analysis software tools.
2.Knowledge of Mil-Specifications and qualification testing.
3.Good communication skills

•Electronics packaging experience and familiarity with Military specifications.
•3D CAD fluency is also a must along with experience with complex systems.
•Rigid flex/bus plane design
•System level design

ADDITIONAL EXPERIENCE:
•Electronics Packaging – this is a requirement for ME III and up for me. – ME III and up
•Recent 3d CAD experience (strong preference is Inventor) – ME II and up
•Vault experience or similar and how recently they’ve used it – ME II and up
•PLM experience (preferred, but not mandatory) – ME II and up
•Able to read basic schematics (preferred, but not mandatory) – ME II and up
•Tolerance Analysis – Preferred for ME II and ME III

EDUCATION:
Bachelor of Science degree in Mechanical Engineering from four-year college or university.

WORK HOURS:
9/80, Day Shift

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistics inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to walk; sit; use hands and fingers, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 161355
Job Location: Anaheim, CA
Rate: $65 - $75
Per Diem: No
Overtime: Possible
Duration: 6 mths.
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineers I - Anaheim, CA

Description:
STS AeroStaff Services is currently hiring Mechanical Engineers I for open positions in Anaheim, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Under general supervision, the Mechanical Engineer I interprets specifications and other requirements, performs complex analysis, design, plans, estimates tasks, directs the execution of detail design and ensures appropriate documentation on projects. The Mechanical Engineer I evaluates and integrates cost effective design, producibility, and manufacturing practices into mechanical designs. Works directly with all engineering supporting disciplines to establish product concepts and carries ideas through final product design. Coordinates and reviews the work of designers and drafters assigned to the program. Complexity of assignments requires the exercise of considerable initiative, planning, and independent judgment.

Job Duties:

• Reviews and interprets specifications and requirements to determine structural, thermal and critical safety characteristics/considerations for mechanical designs.
• Supports other mechanical engineers and drafters in conceptual designs and the preparation of mechanical drawings.
• Reviews and approves project documentation, change requests, etc.
• Performs conceptual designs to meet project objectives, cost, and schedule.
• Will be responsible for all phases of designs from concept through prototype manufacture and production.
• Performs feasibility studies to reconcile project requirements with proposed designs.
• Estimates material and labor costs for proposed designs and proposals.
• Designs cooling systems for new and updated products.
• Prepares and is responsible for project budget/schedule adherence.
• Performs packaging and mechanical design of power conversion equipment.
• Assists in cost estimates and interfaces with suppliers of components/sub-systems.
• Conducts thermal, structural and tolerance analysis.
• Strong knowledge of material and hardware selection including welding, fabrication practices, and machining tolerances to complete a cost-effective design.
• Interfaces with customers, vendors, and production to develop product requirements and solutions.
• Supports the manufacturing build and qualification testing requirements as needed.
• Responsible for maintaining Computer Aided Engineering/Design skills in support of the mechanical engineering and design functions.

Qualifications:

• Bachelor's degree (BSME) from four-year college or university; and minimum 8 years related experience and/or training.
• Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
• Knowledge of Navy/Military environmental qualification testing.
• Knowledge of Mil-Specifications and contracting.
• Skilled in finite element analysis.
• Good communication skills.
• Experience using 3-D CAD software tools in design function.
• Autodesk Inventor, or equivalent modeling software (solid modeler) experience a must.
• Able to obtain DOD security clearance.
• Electronics packaging experience and familiarity with Military specifications.
• 3D CAD fluency is also a must along with experience with complex systems.
• Rigid flex/bus plane design and/or system level design is a plus.
• Electronics Packaging experience is a plus.
• Vault experience or similar and how recently they’ve used it is a plus.
• LM experience (preferred, but not mandatory).
• Able to read basic schematics (preferred, but not mandatory).
• Tolerance Analysis experience is a plus.

Requirements:

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• While performing the duties of this job, the employee is regularly required to sit; use hands and fingers, handle, or feel; and talk or hear.
• The employee is occasionally required to stand, walk, and reach with hands and arms.
• The employee must regularly lift and/or move up to 10 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37307
Job Location: Anaheim, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Electronics Engineer

Description:
RESPONSIBILITIES:
Provide engineering expertise in the area of design, analysis, and testing of spacecraft power electronics and DC-DC power converters 0.5W to 5kW.
Lead electrical power system and sub-system level design trades and develop requirements.
Define and perform electrical power system verification testing and analysis.
Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware.
Create and maintain schedules for development efforts.

BASIC QUALIFICATIONS:
Bachelor of Science degree in electrical engineering.
At least 5 years of experience in power converter development.
Experience with DC-DC power converter development.
PREFERRED SKILLS AND EXPERIENCE:
Master of Science degree or Ph.D. degree in electrical engineering
Candidate should have working experience generating original power converter designs from requirements and know how to design and verify power supply performance.
Working experience in current mode control, compensation design, and loop gain measurements.
Experience working with magnetics and practical design of custom transformers and inductors, including planar magnetics.
Experience in modeling, simulation, and testing of power electronics.
Experience with designing and testing power supplies for power quality and EMI/EMC compatibility.
Passion for hardware simulation and development. Must be a hands-on engineer and excited to work in a fast paced environment.
Strong grasp on power converter topologies and ability to select power converter architectures.
Familiarity with spacecraft electrical power systems and knowledge of radiation effects.
Experience with digital power supply compensation.
Maximum power point tracker design and development.
Power supply testing and packaging for harsh environments.
Familiarity with lithium-ion battery handling, safety, and usage.

ADDITIONAL REQUIREMENTS:
Must be willing to work long hours and weekends as necessary.
 
Job Location: Redmond, WA
Rate: Open
Duration: 3-6 months
Input Date: 09/16/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner - Level 1

Description:
Production Planner - Level 1

Location: Syracuse, NY
Pay Rate: $25/hr (DOE)
Duration: 1 Year Contract
Shift: First, 9/80

*Must be a U.S. citizen*

Job Description:
-Performs the Make, Buy and / or Bill of Material (BOM) planning activities associated with Manufacturing Resource Planning (MRP) transactions.
-Performs one or more multiple manufacturing activities within various manufacturing functions.
-Maintains production systems integrity to drive inventory optimization to minimize cost.
-Expedites and optimizes material flow through the supply chain to meet customer requirements.
-Coordinates with manufacturing and Operations Management to provide shop floor control on make parts, analyzes and controls production schedule and capacity requirements, executes the plan, provides timely status and expedites or works around plans to preserve schedule.
-Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements.
-Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM

Mandatory Skills:
-Experience administering Manufacturing Resource Planning (MRP) tools.
-Shop floor coordination experience. Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements.
-Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM
-Familiarity with SAP, MRP tools: 0-3 years


Desired Skills:
-Experienced administrator of SAP based material resource planning tools.
-Familiarity with Solumina factory management and process planning tool, Electronic Contracting System (ECS), Electronic Shipping System (ESS), and Procure to Pay (P2P);
 
Job Number: 6891
Job Location: Syracuse, NY
Rate: 25.00
Per Diem: Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 02/06/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Simulator Engineer with active secret GA

Description:
Job title: Real Time Simulator engineer
Job Number: 158190/0319
Location: Marietta, GA
Compensation: 55-75/hr(DOE)
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
Non exempt
1st shift

Description:


The selected candidates will become a technical staff member for laboratory development for F-22 and F-35 Pilot-in-the-loop simulators. .

The specific assignment will be the development of real-time software products in Ada and C++ to be used in the F-22 and F-35 Labs.

The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.

These software models will be developed in primarily in Ada with some C++. A Bachelor Degree or Master\'s Degree in Electrical Engineering or Aerospace Engineering with significant software development experience and simulation / modeling experience are preferred for these positions.

However, other technical disciplines (Physics, Math, Computer Science, Computer Engineering, etc.) will be considered along with relevant work experience for applicability to this position.

Prior use of Ada and C++ software languages is required as well as direct experience with real-time software systems and environments.

Excellent communication skills, computer skills, and computer architecture knowledge and domain knowledge in simulation and/or real-time embedded software system is desired.

Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

An active Secret clearance is required for this position.

Development work uses C++, Ada, limited Python, Eclipse, DOORS, Dimensions, UML, and AdaCore GnatPro Studio (GPS).

Skill/Experience/Education
Mandatory:

Experience required with developing real-time embedded software in C++ and/or Ada.

Must have a proven ability to work well in a team environment.

Excellent software development skills and experience

Desired:

Domain expertise in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for pilot-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars
Object Oriented Analysis and Design using UML

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Software Development -- Ada Ability to develop software using the Ada 95 language 4-5 Years Yes
Software Development -- C++ Ability to develop software using the C++ SW language 9-10 Years No
Real-Time Software Development Ability to develop software in a real-time environment, understand the constructs and concepts of hard real-time programming 4-5 Years No
Object Oriented Software Development ability to develop software using Object Oriented constructs and concepts 6-8 Years No
Simulation Software Development Experience developing software for simulation, preferably aircraft and/or threat simulations 6-8 Years No
Warfare Simulation Expertise Knowledge of electronic warfare concepts and how it applies in simulation 9-10 Years No
 
Job Number: DW-0319
Job Location: Marietta, GA
Rate: 55-75/hr DOE
Duration: 12 month contract
Input Date: 01/27/2017
Last Updated: 03/08/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
Responsibilities:

Utilizes inspection equipment such as micrometers, calipers and profilometer.
Approves or rejects items and documents inspection results as required.
Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements.
Communicates with internal customers, and suppliers as required to resolve inspection discrepancies.
Use electronic ERP system to route parts and components to proper departments.

Basic Qualifications:

High School Diploma or GED required.
Minimum 5 years of aerospace precision mechanical inspection experience required.
Experience detecting design and drawing flaws.
Receiving and in process inspection experience is required.
Requires the ability to read and interpret engineering drawings and specifications using ASME Y14.5.
Experience with GD&T and use of metrology tools and gauges required.
Experience with Microsoft Word, Outlook and Excel.

Preferred Skills and Experience:

Capable to operate a forklift and other related inventory equipment.
Experience within the Aerospace, automotive, semiconductor, or electronic fields.

Additional Requirements:

Ability to lift 25-30 lbs., lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.
Must be open to working all required shift hours, including overtime, and weekends, as needed.
 
Job Location: Redmond, CA
Per Diem: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 10/04/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

Description:
SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

Johnson Service Group (JSG) is teamed with a leader in the fuel, combustion, fluid, actuation and electronic control systems for the aerospace, defense and commercial markets. Our client is seeking talented Supplier and Quality Engineers to provide organizational support for quality & regulatory requirements compliance, system and process improvements as well as determining root cause and corrective action.

Scope of Experience and Responsibilities:

-3-6+ years of quality engineering experience within a machine shop, assembly, inspection and/or test environment, ideally with high precision parts and products, such as E/M actuators, hydraulic systems, etc.
-AS9102 experience is required.
-Evaluate Quality Management System (QMS) procedures, documents and work instructions.
-Track, report and analyze quality metrics and identify improvements.
-Quality engineering activities will include: Production Part -Approval Process (PPAP); First Article Inspection (FAI); -Measurement System Analysis (MSA); Failure Modes & Effects -Analysis (FMEA) and Statistical Process Control (SPC) processes.
-Contribute to root cause and corrective action analysis (RCCA), including 8D process.
-Heavily involved with regulatory and/or customer audits.
-Drive continuous improvement principles, methods and tools.
-Perform internal quality audits.
-Knowledge of Title 14 CFR Parts 21, 43, 45, and 145 and related FAA requirements.
-Solid understanding of corresponding regulatory and compliance requirements.
-Excellent communication skills.
-Evaluates procedures and work instructions that are required per the Quality Management System.
-Working knowledge in the interpretation of engineering specifications, mechanical drawings, electrical schematics and -Geometric Dimensioning and Tolerancing (GD&T).
-Knowledge of ISO9001, AS9100, TS16949, QS9000 and/or TS-16949.
-Strong knowledge of Six Sigma principles, tools and methodology, and advocates utilization throughout the organization.
-Understanding of PLC quality process and the use of quality planning tools.

Education/Certification:
-Bachelor's Degree in a related technical field.
-Green Belt certification is preferred.
-ASQ certification is a plus.

Type of Employment: 6 months+

Location: Santa Clarita, CA

Compensation: Highly competitive
 
Job Location: Santa Clarita, CA
Rate: Open
Per Diem: Split
Overtime: No
Duration: 6 months+
Start Date: ASAP
Input Date: 09/27/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Jay Kerrigan
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Lead Power Design Engineer- contract

Description:
Senior Lead Power Design Engineer

On behalf of our client Ingenium is recruiting and evaluating candidates for the position of Senior Lead Power Design Engineer. The Analog Power Electronics Lead Design Engineer designs analog power electrical circuits for converter, inverter, and various other power supply applications from a few watts to a few hundred KW for the next generation of products using state of the art technology. This is a 12-month contract position located in Pompano Beach, Florida.

Principal Responsibilities:
• Execute the design, analysis, or evaluation of assigned individual and team projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements
• Use tools such as Mentor graphics to develop electrical circuit schematics and the latest analytical tools such as MATLAB and SPICE to verify circuit performance
• Work with PCB designers to optimize space allocations, signal integrity, and power flow
• Work with corporate research and development to apply the next generation of technology to existing products and develop new products
• Provide technical leadership to personnel/ cross functional teams supporting the assigned project
• Implement plans with guidance to meet technical requirements of assigned components and systems
• Develop action plans with guidance to respond to issues/ problems
• Lead or participate on teams assigned to address organizational initiatives and generic issues
• Recommend, with guidance, the approach to meet the technical and program requirements
• Participate and/or present in technical and program reviews
• Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
Experience and Qualifications:
• 3 years of experience in a power electronics engineering position
• Bachelor’s degree in engineering
• Experience designing magnetic circuits and components for power electronic applications
• Ability to coordinate several projects simultaneously
Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 63703
Job Location: Rockford, IL Illinois
Rate: 55
Per Diem: possible
Overtime: possible
Duration: 12 mos
Start Date: 1-9-16
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Engineer

Description:
The Project Repair and Overhaul Engineering (GPE) position will perform an integral technical role that could be based in any of our factories or Service Centers. The position is part of the Global Repair & Overhaul Engineering Organization (GROE), Avionics-Electronics (AvEl) group.

The position provides an individual with the opportunity to exercise their diverse technical and specific product knowledge to define, create and implement: rework, repair and evaluation of avionic products.


Responsibilities:


Repair and Overhaul (R&O) Project Engineering (GPE) primary responsibilities:
Own and drive GROE Value Creation Process (VCP) and project tracking
 
Productivity and Cost Reduction


Actively seek out and identify areas to standardize the repair and test procedures for maximum savings and effectiveness across Service Centers.
Provide on-going Make vs. Buy vs. Repair analysis & identify areas of focus.
 
Technology & Implementation
Drive technology implementation projects to deliver operational improvements
Research new and existing technologies for potential application

Planning and Program Management


Liaison coordination between site repair development engineering, site quality, test engineering, product engineering and FAA DER for substantiation and authorization of engineering documentation.
Program manage repairs and projects using workflow tools and VCP
Develop and support M&PM strategies & participate on CSB's as required.
 
Basic Qualifications:
A Bachelor's Degree in Engineering, Supply Chain, Business, or Project Management.
Must be US Citizen or Permanent Resident due to ITAR/Export Requirements.



Additional Qualifications:
High degree of Microsoft Office familiarization
PMP Certification
Knowledge of FAA regulations & processes on avionics and related software.
Understanding of FAR 21 (OEM-Factory) and FAR 145 (Repair Station).
Understanding of specific regulations DO 178, DO 254 and DO 160.
Understanding and compliance to export regulation and ITAR information.
Digital/analog component systems knowledge.
Knowledge of Interchangeability and Configuration Management.
Awareness of product test requirements and limitation of test equipment to replicate aircraft.
 
 
Job Number: 17-00279
Job Location: Phoenix, AZ
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/05/2017
Last Updated: 01/17/2017
Firm Name: NESCO RESOURCE
Attention: Dave Mahabir
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Real Time Embedded

Description:
**Must have Active Secret clearance
*Experience required with developing real-time embedded software in C++ and/or Ada.
*Object Oriented Analysis and Design using UML
*The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.
 
Job Number: Lock-Soft
Job Location: Marietta, GA
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
the Stress Engineer performs design and testing of processes for the manufacture of electronic systems and components. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Instructions are provided on task specifications and design constraints. Close review of new design or applications is provided.



Job Responsibilities

Applies standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.

Normally focuses on existing products or processes.

Participates with drafters, technicians, and others to contribute to project completion.

Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.

Performs other related duties as required.


Minimum Requirements:

Bachelor's degree in Engineering from four-year college or university; and one-to-three years related experience and/or training; or equivalent combination of education and experience.

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.

Ability to write reports, business correspondence, and procedure manuals.

Ability to effectively present information and respond to questions from managers, associates, clients, customers, and the general public.

Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.

Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/23/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Job Summary
the Stress Engineer performs design and testing of processes for the manufacture of electronic systems and components. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Instructions are provided on task specifications and design constraints. Close review of new design or applications is provided.

Job Responsibilities
Applies standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
Normally focuses on existing products or processes.
Participates with drafters, technicians, and others to contribute to project completion.
Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
Performs other related duties as required.
 
Minimum Requirements:
Bachelor's degree in Engineering from four-year college or university; and one-to-three years related experience and/or training; or equivalent combination of education and experience.
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from managers, associates, clients, customers, and the general public.
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.
Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/25/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Lab Technician - 1st Shift

Description:
Johnson Service Group seeking a Ground Test Structural Lab Technician for Stratford Ct.

1st Shift

Duties:
Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs.

Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred.

Must be able to read and interpret engineering mechanical drawings and fluid power schematics.

Must be able to assist with the buildup and monitoring of engineering laboratory facilities.

Must be able to assemble required fixtures and facility hardware.
 
Job Number: 352695
Job Location: Stratford, CT
Rate: open
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/21/2016
Last Updated: 02/14/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Substation Physical Drafter

Description:
Position Description:

Creates and revises physical plans, sections, and details related to Electric Utility substation installations including, general arrangements, grounding, conduit and foundation designs.

Performs first line quality assurance review of drawing package

Electronically transmits completed design packages using current document management system.

Coordinates project drafting schedules with design engineers.


Job Requirements:

Knowledge and Experience
• Comprehensive knowledge of AutoCAD
• Experience working on time-critical projects
• Experience and competency working with Microsoft Office products (i.e., Word, Excel, Outlook)

Skills
• Mechanical perception to understand spatial relationships
• Strong analytical skills
• Acts with initiative and speed
• Good work ethic; dependable and trustworthy
• Adaptable to change
• Learns quickly
• Strong attention to detail
• Ability to plan work and effectively manage time
• Excellent interpersonal skills
• Excellent communication abilities; written, oral and listening
• Effectively organizes tasks, and manages multiple priorities and tight deadlines
 
Job Location: Forrest Park, GA
Per Diem: No
Start Date: ASAP
Input Date: 01/06/2017
Firm Name: YOH SERVICES
Attention: Steven Holsapple
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer

Description:
System Design Engineer
6 month contract
Torrance, CA

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning

• Meeting demanding performance requirements
• Designing safety critical systems
• Delivering systems that will perform to expectations in harsh environments

Create block diagrams and definition of redundancies and system attributes to support performance safety requirements.
• System box level architecture for all electronics requirements, environmental testing, verification metrics.
• Interfacing with the customer and negotiation and clarification of requirements during PDR/CDR.
• Integration testing and test support during qualification and certification
• Preparing requirement compliance metrics
• Act as a Project Manager for System Design portion of electronics development

Ability to write clear and simple specification (DOORS)
• Avionics experience required (Flight Control preferred)
• Integration, test and qualification of electronic hardware
• DO254 and ARP4754A guidelines and review process
• Defining redundant systems to meet safety requirements
• DO160 is a plus (Environmental & EMI/EMC)
• Test Requirement for Test Equipment
• Box level ATP generation
• Box level Hardware/SW integration
• Leadership skills - and Project Management experience

BSEE - 5 - 10 years of experience required!
 
Job Number: 50863
Job Location: Torrance, CA
Rate: 50.00
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 01/04/2017
Last Updated: 01/11/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Service Librarian - 3 CA

Description:
Technical Service Librarian - 3 (Job Number: 16027697)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: Dec 5, 2016

Pay Rate: $40 to $45/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Position Summary / Responsibilities
Determines types of technical literature searches and sources of information to satisfy the scientific information needs of researchers and staff within the company. Conducts searches of technical literature, analyzes and evaluates data, extracts pertinent information, prepares information abstracts and bibliographies of material searched. Maintains extensive knowledge of literature resources and continuous contacts with local, national, and international information centers and agencies. Maintains and improves information retrieval capabilities. Assists in the selection of literature for inclusion in the library's collection and may translate foreign technical literature. Keeps abreast of developments in areas of interest to the company and periodically consults with researchers and other information users to ensure maximum usefulness and service.


Basic Qualifications:

· Associate of Science Degree in Information Technology, Engineering, or a related technical discipline plus 6 years of experience.
· 6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)
· Experience in change control procedures and processes
· Experience with Microsoft Office software 2010
· Solid interpersonal and communication skills
· Good organizational and problem solving skills with an ability to adapt quickly to changing requirements


Preferred Qualifications:

· Knowledge and some design experience of electronic parts and assemblies
· Knowledge of government project and business rhythms
· Experience with Cadence Virtuoso version 5.1 (or higher)
 
Job Number: MB-16027697
Job Location: Manhattan Beach, CA
Rate: 45/hr max
Duration: 12 month contract
Input Date: 12/28/2016
Last Updated: 01/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Test Engineer

Location: Owego, NY
Pay Rate: $25/hr - $29.80/hr (DOE)
Duration: 1 Year Contract
Schedule: 9/80
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)
*Must be a U.S. Citizen*

**This is primarily a first shift position. However, any candidate submitted should on occasion and driven by business needs plan for working an off shift or alternate schedule which could contain 2nd or 3rd shift hours and/or weekend work**

Job Description:
Specific duties will include:
-test procedure development;
-test planning and preparation;
-test procedure execution;
-coordinate system resources to support testing;
-support test development, integration, and anomaly resolution as required;
-support off-hours testing and associated projects as needed.
-This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment.
-Additionally, the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
-Personal characteristics must include flexibility, adaptability, a self-starter requiring minimal direct supervision, able to work both individually and as part of a team, and able to interact and work well with Company employees and internal customers
-An eye test is required and is a condition of this offer

Mandatory Skills:
Experience with:
-test procedure development;
-test planning and preparation;
-test procedure execution;
** This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment. **
-the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
-Must also accept the schedule which on occasion includes off-shift (afternoon, nights, and weekends) scheduling to meet business needs.

Education:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 6885
Job Location: Owego, NY
Rate: 25.00 - 29.80
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 06/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 2

Description:
Test Engineer - Level 2

Location: Dallas, TX
Duration: 1 Year Contract
Pay Rate: $50/hr - $60/hr (DOE)
Shift: First, 9/80
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

*Must be a U.S. citizen*

Job Description:
-Designs, develops, and implements testing methods and equipment.
-Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
-Compiles data and defines changes required in testing equipment, testing procedures, or new testing requirements.

Mandatory Skills:
-One of the following degrees: BSEE or BSEET or BSCE
-Hardware design and troubleshooting knowledge for computer based automated test equipment
-Familiarity with National Instruments development tools
-C programming language: 0-3 Years
-MS Office – Word, Excel, and PowerPoint: 0-3 Years

Desired Skills:
-Experience developing or maintaining ATE for military electronics.
-MS Visio: 0-3 Years
-NI LabVIEW: 0-3 Years
-NI Teststand: 0-3 Years
-NI CVI: 0-3 Years
 
Job Number: 6920
Job Location: Dallas, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/29/2016
Last Updated: 02/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 2

Description:
Test Engineer - Level 2

Location: Dallas, TX
Duration: 1 Year Contract
Pay Rate: $50/hr - $60/hr (DOE)
Shift: First, 9/80
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

*Must be a U.S. citizen*

Job Description:
-Designs, develops, and implements testing methods and equipment.
-Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
-Compiles data and defines changes required in testing equipment, testing procedures, or new testing requirements.

Mandatory Skills:
-One of the following degrees: BSEE or BSEET or BSCE
-Hardware design and troubleshooting knowledge for computer based automated test equipment
-Familiarity with National Instruments development tools
-C programming language: 0-3 Years
-MS Office – Word, Excel, and PowerPoint: 0-3 Years

Desired Skills:
-Experience developing or maintaining ATE for military electronics.
-MS Visio: 0-3 Years
-NI LabVIEW: 0-3 Years
-NI Teststand: 0-3 Years
-NI CVI: 0-3 Years
 
Job Number: 6892
Job Location: Dallas, TX
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 02/21/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Project Engineer / experience in the design, analysis, and development of complex electrohydraulic, electromechanical, or electropneumatic servomechanisms CA

Description:
Job Title: Test Equipment Project Engineer
Job Number: 154641/4192
Location: Torrance, CA
Compensation: DOE
Assignment Length: 6 month contract

Description:

The functional expertise required for this Sr. Project Engineering Position is primarily in the field of Electronics Engineering with significant experience required in the areas of position control and power electronics and project management.

The Senior Project Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment. Most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers. His/Her primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules. The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.

The Sr. Project Engineer is responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design. He/She must frequently solicit their aid and support to achieve difficult schedule objectives.
The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

Since this individual will often be seen by customers as the responsible technical representative of the company, he/she must be able to communicate fluently to a wide variety of audiences. He/She will be required to travel frequently and organize and make presentations to customers.

To achieve the position of Senior Project Engineer, an individual will have a BS degree in Engineering, probably an advanced degree, with a depth of understanding achieved through experience in the design, analysis, and development of complex electrohydraulic, electromechanical, or electropneumatic servomechanisms. In addition, he/she must have a proven record of successful development programs working as a part of a project team.
Essential job functions:
Required skills:
Scope:
Education: A Bachelor's Degree Mechanical Engineering

Other Requirements
Please note on the submittal if the candidate is interested in a Full-Time or Contract position.
 
Job Number: MB-4192
Job Location: Torrance, CA
Duration: 6 month contract
Input Date: 01/03/2017
Last Updated: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer 3

Description:
787 WIRE DESIGN SUPPORT NEEDED!!!!

Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com.


Wire Design & Install Engineer 3

Location: North Charleston, SC
Duration: 1 year

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
679-Electrical/Electronic Installa
 
Job Number: 24328-1
Job Location: North Charleston, SC
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 02/22/2017
Firm Name: ICONMA LLC
Attention: Holly Herrera
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer 3

Description:
Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

Wire Design & Install Engineer 3
Location: North Charleston, SC
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Additional Comments: Candidate must be flexible to support BSC production requirements.

Skill Code: 679-Electrical/Electronic Installa
 
Job Number: 23342-1
Job Location: North Charleston, SC
Per Diem: Yes
Duration: 12 months
Input Date: 12/28/2016
Last Updated: 01/11/2017
Firm Name: ICONMA LLC
Attention: Holly Herrera
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer 4

Description:
MULTIPLE OPENINGS FOR 787 WIRE DESIGN!!!!

Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com.

Wire Design & Install Engineer 4

Location: North Charleston, SC
Duration: 12 months

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
679-Electrical/Electronic Installa

Additional Information:
Software: CATIA V5, ENOVIA

Skill set:
Wire installation, equipment installation, part design, and project management skills.

Skills
Category Name Required Level
Areas of Expertise Project Management Yes Advanced
Software Skills CATIA V5 Yes Advanced
Software Skills ENOVIA Yes Advanced
 
Job Number: 24330-1
Job Location: North Charleston, SC
Rate: 60.00
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 01/03/2017
Last Updated: 01/11/2017
Firm Name: ICONMA LLC
Attention: Holly Herrera
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Back to Advanced Job Search