Job Search Results

998 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/12/15 Sunday 09:53PM Pacific Time by ContractJobHunter. )

Listings 1 - 998

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)

Description:
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)
Clifton, New Jersey 07014

Duration 12 months

Electronic Systems

NOTES:

1. Total of 10 positions needed
2. MUST HAVE ACTIVE CLEARANCES - no interim clearances accepted

Job Description:

Perform technical planning, system integration, verification and validation activities in support of programs and development efforts.
• Ensure the logical and systemic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Perform functional analysis, timeline analysis, detail trade studies, requirements, and allocation and interface definition studies to translate customer requirements into hardware and software specifications.
• Perform Cost, Risk, and Supportability and Effectiveness analyses for total systems (concept, design, fabrication, test, installation, operation, maintenance & disposal)
• Work in a highly dynamic hardware & software development and integration lab
• Support/lead technical proposals, including decomposition of customer requirements into a system architecture/design, technical writing, technical risk management, cost estimating, etc.

Contact Phone Number: 813-510-3032
Email: christion@bentleygr.com

Job Number: 1741
Job Location: Clifton NJ
Rate: 60-65
Per Diem: Yes
Overtime: Possible
Duration: 12 MONTHS +
Start Date: 2 weeks from offer date
Input Date: 11/08/2019

Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Christion
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/510-3032
Fax Phone: 813/854-1605
Website: www.bentleygr.com

2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).

Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019

Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019

ACH Project Analyst II, Parsippany, NJ 07054

Description:
PDS Tech, Inc. is seeking a Product Analyst II, Parsippany, New Jersey, 07054. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
15 month contract with possible extensions. Must be a US Citizen or Green Card holder to qualify.

Manager would like ACH experience if possible. Open to looking at BA’s for this role as she is wanting someone that can be analytical like a BA. Need to have excellent soft skills and need to have good and work well in a fast paced environment.

What does a great Product Analyst do?
Leads the analysis and design phase of the ACH product enhancements and ensures that the enhancements are implemented as designed. Acts as a Subject Matter Expert (SME) both within EPS and with clients and prospects. Fosters and manages stakeholder relationships and expectations.

Essential Job Responsibilities:

· Leading the analysis phase of a project with the possibility of one or more BA’s aligned to them to support its delivery

· Collecting, understanding, and communicating the business requirements for the project, and translating these into functional specifications and detailed test analysis that can be utilized by the development teams.

· Collaborate with product architects and technical architects/leads to define solutions

· Document the results of business analysis and obtain sign-off from stakeholders/clients, when applicable

· Provide design direction, to delivery personnel, and review the design and specifications for changes that affect their respective modules

· Provide the link between the client/stakeholder, development team and any third-party regarding software functionality, throughout the development lifecycle

· Design, specify and execute business test scenarios

· Analysis, preparation and management of product enhancements that affect their modules

· Communicate with the client’s subject matter experts and system users to identify business needs and/or resolve product issues, during clearing development, sales meetings and/or workshops

· Provide sales support in the form of SME during sales calls, RFP responses, RFI responses, conduct and/or assist with workshops, demos, and POCs

· Provides SME support when needed, and conducts product training for other employees at Dovetail

· Facilitate scoping for client/prospect payments change initiatives of varying size and complexity

· Responsible for managing the overall requirements catalogue for a project

Basic Qualifications for Consideration:

· Familiar with standard software development concepts, practices, and procedures with regard to code management, quality gates, and documentation.

· Experience in project management tools, e.g. JIRA

· 3+ years release management experience

· Strong interpersonal skills, written and verbal communication

· Exceptional organizational skills

· Must thrive at working in a fast-paced environment with the ability to remain calm under pressure

· Expert in ACH payments

· Detail oriented, flexible with the ability to meet tight deadlines.

· Bachelor’s degree or equivalent

Travel required: Travel might be required to travel to our European and North America based clients as needed.

Job Number: 1910108030
Job Location: Parsippany, NJ
Duration: 15 months
Input Date: 10/23/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fPlkQAE&URLSource=cjhunter

Administrative Assistant II

Description:
PDS Tech, Inc. is seeking an Administrative Assistant II, in Tualatin, OR.

General administrative responsibilities include preparation of reports/presentations using various software packages and databases, compilation of information from various sources, and handling small scale projects.
Performs audits of various types. Individuals at this level may still perform office functions outlined in the first two levels but these are not the primary focus of the position.
Individuals may deal with confidential material on a regular basis.

For Additional Information on this Opening Please Contact Heidi Smith at 843-628-5380
Email Your Updated Resume to hsmith@pdstech.com

Job Number: 1910107249
Job Location: Tualatin, OR
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Heidi Smith
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM95QAE&URLSource=cjhunter

Administrative Assistant II

Description:
PDS Tech, Inc. is seeking a Administrative Assistant II, in San Antonio, TX.

General administrative responsibilities include preparation of reports/presentations using various software packages and databases, compilation of information from various sources, and handling small scale projects.
Performs audits of various types. Individuals at this level may still perform office functions outlined in the first two levels but these are not the primary focus of the position.
Individuals may deal with confidential material on a regular basis.

Job Number: 1910106276
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 09/13/2019
Last Updated: 12/13/2019

Administrative Assistant III

Description:

PDS Tech, Inc. is seeking an Administrative Assistant III, in Nashville, TN.

Job Summary
The Administrative Assistant III provides high level administrative support to include complex and confidential functions on behalf of a department head or large department, to complete assigned tasks and projects of a complex nature. Assigned administrative programs and projects. May supervise or give work direction to lower level clerical personnel.

Job Duties - Some examples of the job duties may include:

The ideal candidate for the Administrative Assistant III position may greet visitors, answer requests, answer phones, screen/route callers, take messages, and assist in resolving routine problems and inquiries pertaining to departmental policies / procedures.
May supervise or give work direction to lower level clerical personnel.
May be responsible for scheduling appointments and engagements on behalf of the department, without prior clearance.
May make arrangements and coordinate all details for meetings, conferences and special events including catering requests, presentation materials and equipment.
May plan and coordinate meeting arrangements including travel and lodging and process expense reports.
May be responsible for interpreting administrative decisions and policies to complete assigned tasks and projects of a complex nature.
May review, prioritize and determine actions for all incoming correspondence and mail.
May order office supplies and equipment; organize and maintain department filing systems and other records.
May assist with creating, maintaining and collecting data for reports, charts, graphs, spreadsheets and databases.
May assist with monitoring and approving departmental expenditures, department budget and account records.
May make requests for office equipment repairs and work closely with facilities to ensure that equipment, materials and office space are used effectively.
May compose documents; maintain relevant databases; update departmental websites and related records.
May be exposed to confidential information and handle confidential matters.
May research, analyze and summarize data for reports independently and assist with large project coordination.
May maintain calendars for management.

Job Requirements:

High School Education or equivalent of three years or more of administrative support and understanding of general office procedure experience required.
Excellent listening, oral, verbal and written communication skills required.
Ability to exercise discretion and independent judgment within understood policies and procedures preferred.
Experience with standard report generation; office administrative practices and procedures required.
Intermediate skill level or better and knowledge with using computer applications involving word processing, data entry and/or standard report generation including: Microsoft Office Word, Excel, Access, PowerPoint, and internet search software relevant to the position required.
Familiarity with using pivot tables and advanced formulas when working with spreadsheet and reports preferred.
Good attention to detail skills and the ability to multitask preferred.
Good organizational, problem solving and time management skills a plus and preferred.
Must be able to work in a seated position for the duration of the workday preferred.
Must perform office tasks using simple hand grasping, fine hand manipulation and reach associated with assigned tasks such as paperwork, computer keyboarding, filing, and calculating preferred.
Sufficient ability to communicate through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions preferred.

Job Number: 1910108135
Job Location: Nashville, TN
Duration: 3 months
Input Date: 10/24/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQ7eQAE&URLSource=cjhunter

Administrative Support - no clearance NY

Description:
166667
Job Title: Administrative Support

Work Site Address: Syracuse, NY 13221
Job Number: 2494-1
Max Pay Rate: $19.60/hr Max Bill Rate:
$26.46/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract

Job Summary: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board.
Utilize hi-speed print production printers, wide-format production printers, folders, punches and cutters to produce high-quality materials for distribution.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Responds to telephone and email inquiries concerning the status of customer's work order and general duplication questions; notifies customers when orders are completed; resolves questions or issues related to production.
Collates, folds, staples, binds, cuts, drills, mounts, and packages printed materials according to job specifications. Interface with customers to determine requirements and priorities.
Performs basic maintenance of all production equipment including preventive maintenance and general cleaning; contacts service representative for machine problems requiring major repairs. Performs data entry function to create job tickets for tracking and billing purposes. Maintains inventory of paper and other supplies. Keeps work areas orderly, clean, and safe; ensures proper care in the use of equipment and supplies. Performs miscellaneous job-related duties as assigned. Able to lift boxes of paper and perform repetitive print production tasks.
Xerox high-speed and wide format printer operation, finishing operations including folding, cutting, binding, etc. Set up jobs in PDF using Fiery software (OTJ training).

Qualifications and Education Requirements
Basic Qualifications
> - Previous experience in a high-volume, fast-paced print shop
> - Experience with high speed and wide-format print operations
> - Able to work overtime, extended shifts, weekends
> - Ability to multitask and shift priorities based on business needs
> - Outstanding interpersonal skills, team player, customer-oriented
> - Self-starter, comfortable working alone or with a team
> - Outstanding organizations skills
> - Able to listen to, understand and follow written or oral
> instructions
> - Ability to lift up to 50lbs
> - Valid Driver’s License
Desired skills
> - Experience in a digital print production environment
> - Experience scanning hard copies to data files
> - Experience with Adobe Pro
> - Experience editing and adjusting PDF files
> - Experience with Microsoft Office Suite
> - Experience running Xerox production print equipment
> - Experience using FIERY software including Impose/Compose and
> Jobmaster

Skills: Category Name Required Importance Experience
Software Skills Adobe Acrobat Yes 1 1 - 2 Years
Software Skills MS Office Yes 1 1 - 2 Years
Technical Skills Ability to Edit, Process, and Implement Work Orders No 1

Qty 1 position

Job Number: LMRMS-2494-1
Job Location: Syracuse, NY
Rate: 19.60/hr max
Duration: 12 months
Input Date: 10/24/2019
Last Updated: 12/09/2019

Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Administrative Support - no clearance NY

Description:
166643
Job Title: Administrative Support

Work Site Address: Owego, NY 13827
Job Number: 2375-1
Max Pay Rate: $21.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Performs variety of activities in support of human resources for a specific project.

Gathers, collects, records, tracks and verifies data and information from multiple sources. Compiles, reviews and analyzes data. Uses software for functional area, to compile and generate individual records. May assist with processes to enhance work flow. Provides data and information to others on functional unit processes and procedures. Performs routine, repetitive, and basic tasks where precedent, methods and processes are well established. Makes simple decisions, but refers most to more experienced personnel.

Qualifications and Education Requirements
No BS required
High School diploma, or equivalent experience/combined education and less than 1 Year of experience.
Must have the required skills.
Moderate understanding of general job aspects and superficial understanding of the technical phases of the job.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Microsoft Suite Yes 1 1 - 2 Years
Software Skills Nuance Power PDF Yes 1 1 - 2 Years
Technical Skills Basic Computer Skills Yes 1 1 - 2 Years

Qty 2 positions
This is a non-exempt level 1 position. Apprentice or Trainee.
Manager is looking for particular skills set. However it is a very basic position.

Job Number: LMRMS-2375-1
Job Location: Owego, NY
Rate: 21/hr max
Duration: 15 months
Input Date: 10/21/2019
Last Updated: 12/09/2019

Advanced Composite Tech SR

Description:

PDS Tech is looking for an Advanced Compos Tech Sr for an open position in Tulsa, Oklahoma.

Under little or no supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Function as a team member and assist in providing technical direction to other team members. Possess the ability to organize and perform new job tasks with a working knowledge of other parts and part numbers. Establish priorities and assist in the development of work schedules. Must be proficient at directing and monitoring the work of team members. Willing to perform the job functions of a team leader in their absence.

Principal Duties and Responsibilities:
Essential Functions: 1. In a team oriented work environment, manufacture a wide variety of composite aircraft parts to meet manufacturing specifications. Possess the ability to perform close tolerance work. 2. Must demonstrate leadership ability and possess good communication skills. 3. Demonstrate ability to plan, organize, execute, and obtain objectives with minimal direction. 4. Demonstrate the ability to meet the requirements of the manufacturing competencies at the appropriate level in the Employee Effectiveness Review. 5. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 6. Must be proficient in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 7. Check all work and ensure a defect free assembly prior to inspection. 8. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 9. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 10. Adapt to sudden schedule changes. 11. Coordinate with other disciplines concerning projects. 12. Support lean activities as required.

Additional Functions: 1. Demonstrate good shop practices at all times, including housekeeping and safety standards. 2. Perform other duties as assigned.

.

Education and Experience Requirements:

High School graduate or GED. Q stamp qualified in related composite assembly processes. Must be able to use basic mathematical formulas to solve dimensional problems. Good working knowledge of computers and related software. Five (5) years of related experience in composite manufacturing processes.

Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift. 3. Thorough knowledge of manufacturing procedures and specifications, plant safety, tooling, and quality requirements. Demonstrated ability to troubleshooting manufacturing processes. 4. Possess strong written and verbal communication skills. 5. Must possess leadership skills and the ability to communicate and impart knowledge to others

Job Number: 1910108593
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 11/05/2019
Last Updated: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership.
2. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.
3. Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments.
4. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team.
5. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
6. Strong verbal and written communication skills are highly desirable.
7. Occasional overtime and odd hours required.
8. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
9. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
10. Must be able to obtain a Secret security clearance and be able to obtain special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation.
3. Experience in design and fabrication of high voltage, high current, high energy, and high power systems.
4. Experience with laboratory power equipment such as oscilloscope.
5. Experience leading teams.
6. Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets.
7. Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion.
8. Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays.
9. Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, Hall Effect transducers, and grounding rods.

Job Number: 11740
Job Location: Palmdale, CA
Rate: $90.00 - $102.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/21/2019
Last Updated: 11/14/2019

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
2. Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments.
4. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including work with Class III and Class IV lasers.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Education/Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
3. Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
4. Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
5. Experience in plasma modeling and simulation.
6. Experience with thermal and structural analysis from first principles.
7. Experience with solid state physics.
8. Coursework in plasma chemistry/non-equilibrium effects.
9. Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
10. Proficient with CAD software such as CATIA V5.

Job Number: 11709
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/11/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team's performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.

Job Number: 11710
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/11/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.

Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/09/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166556
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2224-1
Max Pay Rate: $83.00/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
-- Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
-- Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
-- Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
-- Experience in plasma modeling and simulation.
-- Experience with thermal and structural analysis from first principles.
-- Experience with solid state physics.
-- Coursework in plasma chemistry/non-equilibrium effects.
-- Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
-- Proficient with CAD software such as CATIA V5.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including work with Class IIIb and Class IV lasers.

Qty 1 position

Job Number: JE-2224-1S
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/11/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview / strong background in experimental plasma physics CA

Description:
166532
Job Title: Aeronautical Engineer
Work Site Address: Palmdale, CA 93599
Job Number: 2222-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

Roles and Responsibilities
The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
Requires use of MS Office software tools to compile data, reduce data, and generate reports.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
--Proficient with MS Office tools

Qty 1 position
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
None to start. Must be able to obtain a Secret security clearance.

Job Number: JE-2222-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/31/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena CA

Description:
166557
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2225-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments. Requires use of MS Office software tools to compile data, reduce data, and generate reports. Strong verbal and written communication skills are highly desirable.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
--Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
Occasional overtime and odd hours required. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.

Qty 1 position

Job Number: JE-2225-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 11/14/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments CA

Description:
166650 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2228-1
Max Pay Rate: $102.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.

Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team. Requires use of MS Office software tools to compile data, reduce data, and generate reports.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation
--Experience in design and fabrication of high voltage, high current, high energy, and high power systems
--Experience with laboratory power equipment such as oscillo
--Experience leading teams
--Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets
--Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion
--Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays
--Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, hall effect transducers, and grounding rods

Qty 1 position

Job Number: JE-2228-1ATO
Job Location: Palmdale, CA
Rate: 102/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/31/2019
Last Updated: 11/14/2019

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.

Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 12/13/2019

Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Airframe Structural Analyst

Description:
PDS Tech is seeking an Airframe Structural Analyst in Hunstville, AL.

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.

Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:

Static structural analysis and Margin of Safety determination,
Fatigue and fracture mechanics analysis of critical interfaces,
Determination of airframe component replacement and / or retirement times,
Specification and design of airframe related static and fatigue tests,
Field support and
Formal engineering documentation.

Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience
Required:

Minimum of 12 years’ experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills

Software Experience:

NASTRAN/PATRAN or equivalent FEM,
Catia
MS Office applications.

Secret Clearance preferred but not required.

US Citizenship Required.

Job Number: 1910105509
Job Location: Huntsville, AL
Duration: 15 months
Input Date: 08/13/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWpKQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Engineer

Description:
SG is hiring an Airframe Structural Engineer for a 15+ months contract opportunity in Huntsville, AL!

Description:

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.
Specific functions include: Static structural analysis and Margin of Safety determination, fatigue and fracture mechanics analysis of critical interfaces, determination of airframe component replacement and / or retirement times, specification and design of airframe related static and fatigue tests, field support and formal engineering documentation.

Education requirement:

B.S.in
M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience Required:

Minimum of 12 years experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills are required.
Software Experience: NASTRAN/PATRAN or equivalent FEM, Catia, MS Office applications.
Secret Clearance preferred but not required.
US Citizenship Required.

Job Number: 375757
Job Location: Huntsville, AL.
Per Diem: Possibly
Overtime: Possibly
Duration: 15+ Months
Start Date: ASAP
Input Date: 09/23/2019
Last Updated: 10/31/2019

Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Application Development - Cleared Contractor

Description:
Job Description:
Responsible for research, design, and development of computer software systems in conjunction with hardware product development.
Primarily responsible for the design and development of software products for a variety of software applications.
Participates in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and test of software products.
Applies computer science, engineering, and mathematical analysis concepts and principles in the development of the target application.
Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.
Develops software test procedures, software programs, and related documentation. Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure product meets project cost, schedule, and technical constraints.
Recognized as an internal expert and thought leader in area of expertise with broad experience across multiple job areas.
Works under consultative direction against annual goals to manage large, complex project initiatives of strategic importance to the organization.
Communicates within and outside of the organization to influence leadership to accept new practices, approaches, and concepts.
Develops or champions new systems, concepts, or technologies.
Recommends tactics and strategies that directly impact the achievement of overall business or functional results.

QUALIFICATIONS
A Bachelor's degree in Computer Science, Electrical Engineering, or related engineering field
9+ Years of Embedded Software Engineering experience
9+ Years experience with Ada
9+ Years Real Time Operating Systems Experience
Must have Real Time Operating Systems Experience
Experience with Ada

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Location: Clifton, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 10/25/2019

Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Application Specialist

Description:
POSITION PURPOSE:
Work independently as a high-level technical expert for the company ACH Hosted and ASP Outsourcing implementations, providing expert consultation to the client before, during, and after conversion as well as internal consulting services. As a technical consultant, analyze client requirements, develop application integration programs/utilities and provide expertise to the Outsourcing organization to meet client and company business needs.

RESPONSIBILITIES:
1. Evaluates the systems needs of internal and external clients and recommends appropriate
solutions.
2. Analyzes existing programs or formulates logic for new systems and devises logic procedures
related to advances in related technology.
3. Configures product or customized technology solution based on technical specifications.
4. Designs, codes, installs and maintains systems software programs, as well as applications and
systems analysis on an as needed basis.
5. Serves as the primary client interface from a technical perspective
6 Communicate progress and any potential problems to company management for awareness and/or
resolution.
7. Resolve complicated software support issues related to application design specifications.
8. Provides technical assistance and information to the client, computer operations, technical
services and application programming.
9. Participates in 24 x 7 on-call rotation.
10. Provides input for the documentation for use by the client, computer operations, client services
and technical services
11. Completes other duties as assigned.

THIS POSITION IS A REMOTE POSITION
QUALIFICATIONS:
Education: Bachelor’s Degree in Computer Science or equivalent education in a related discipline is required. Related work experience can be substituted for educational requirement.

Job Related Experience:
Typically requires seven or more years experience in application and/or enterprise architecture design and development, managing and delivering software and integration projects to clients.
Exposure to ACH Operations and/or PEP+ product is a plus.

Distributed Systems Concentration of Skills/Knowledge:
Working experience and highly proficient with a wide variety of database and web technologies including but not limited to:
Windows Server Technology
Linux, AIX or Unix Server Platforms
WebLogic or WebSphere Application Servers
Apache or IIS Web Servers
Oracle, SQL, and DB2 database technology
IBM WebSphere MQ
SOAP, WSDL, XML
TCP/IP and networking protocols, firewall architectures and security systems

Mainframe Systems Concentration of Skills/Knowledge:
Working experience with mainframe file structures such as – VSAM, DB2.
Working experience with mainframe communication protocols such as – TCP/IP
Working experience with mainframe utilities such as JCL, RACF, etc
Working experience with IBM’s Transaction Server, CICS.
Working experience or familiarity with mainframe programming languages such as – COBOL

General Functional Area Skills/Knowledge:
Solid understanding of the Software Development Life Cycle (SDLC) and all aspects of application phases from design through deployment.
Must demonstrate experience working with third party systems.
Familiar with relevant business issues as they impact overall project plans.
Excellent communication and reading comprehension skills.
Able to integrate product knowledge with technical knowledge.
Able to learn new applications and new platforms as needed.

WORKING CONDITIONS:
• Ability to work extended workdays, weekends and holidays as required
• Occasional travel is required.

Job Number: 1910106307
Job Location: Lake Mary, FL
Duration: 6 months
Input Date: 09/11/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fHVGQA2&URLSource=cjhunter

Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States

Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.

Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)

Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software

Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/19/2019
Last Updated: 12/09/2019

Associate Image Scientist

Description:
PDS Tech, Inc. is seeking Associate Image Scientist in Westford, MA.

The successful candidate will have sufficient image science background to work on the algorithmic components required to process raw digital imagery and understand the interaction within an imaging chain as well as order of operations. They will understand the fundamental factors that make-up and influence image quality as well as being familiar with some of the measurement concepts, such as the modulate transfer function (MTF), relative edge response (RER), dynamic range, signal to noise ratio (SNR).

Experience with geo-positioning, geo-location or photogrammetry would be a plus.
A current active security clearance is a plus.
Basic Requirements:

US Citizenship required. Willingness to obtain and ability to obtain a US Government security clearance is required.
This position requires a minimum of a Bachelor’s degree in the appropriate disciple such as Image Science or related fields such as Physics and Electrical Engineering along with 3 years of relevant experience. In the absence of a degree 7 years of relevant experience is required

Preferred Skills:

Familiar with SOCET GXP software
Familiar with ENVI software
Knowledge of photogrammetry and geo-location methods

Experience/Qualifications:

Experience with Electro-optical systems
Proficient with Matlab and/or IDL for scientific programming and data analysis
Proficient with Microsoft Office software: Word, PowerPoint, Excel
Experience with ISR systems and DOD is a plus
Familiarity with C++ is a plus
Familiarity with Machine Learning would be a plus
Ability to multi-task
Team oriented
Excellent verbal and written skills
Travel
10%
Knowledge of image systems and associated processing
Strong Mathematical background
Strong team player and interpersonal skills
Excellent verbal and written skills

Job Number: 1910107089
Job Location: Westford, MA
Duration: 24 months
Input Date: 09/25/2019
Last Updated: 12/13/2019

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week

Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed

Job Location: Midwest
Input Date: 01/14/2015

Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 11/20/2019

Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 12/04/2019

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 12/13/2019

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

Description:
166533 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2183-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
Experience with the verification and sell off of a subsystem to a customer through formal test events.
Experience developing subsystem design/engineering documentation.
Experience with Agile Software Development and/or SCRUM processes.
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation
Strong Interpersonal & Collaboration Skills
Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Qty 1 position

Job Number: JE-2183-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/05/2019
Last Updated: 12/09/2019

Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position

Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 12/09/2019

Avionics Engineer - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position

Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 12/09/2019

Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1

Qty 2 positions

Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/01/2019
Last Updated: 12/09/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.

Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019

Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Backup Recovery Systems Administrator

Description:
Roles and Responsibilities include but not limited to:

• The Storage Backup and Recovery Administrator performs daily operations in an Dell EMC Avamar and Dell EMC Data Domain environment to backup, recover and archive USPS information and requires interaction with other USPS organizations and individuals to identify incidents, diagnose and resolve problems, and assist with storage usage and features.

• Must carry a pager and be on call. May be required to support different shifts to enable weekend support.

• This position is dedicated to the ECS DMS Data protection team to perform all activities associated with managing, supporting and troubleshooting backup, recovery and archiving in a large, complex and widely distributed environment
.
• Perform daily monitoring and management of the backup solution implemented within the USPS infrastructure.

• Monitor backup jobs, execute restore jobs, troubleshoot failed jobs, and initiate corrective action.

• Provide status and progress reports for backup environment related activities and tasks,

• Perform reliable, secure backup and recovery across the enterprise in accordance with USPS and DMS policy and procedures.

• Perform diagnosis, troubleshooting and root-cause analysis of Avamar and Data Domain solutions currently installed within the USPS infrastructure; provide technical expertise to resolve escalated issues; maintain archives in accordance with USPS and DMS policy and procedures; perform planning, testing, implementing and deploying new backup products and maintaining existing solutions, e.g., upgrading and patching.

• Ensure environment and software compatibility of Avamar and Data Domain solutions to be installed, implemented, and integrated with the existing environment.
• Provide action items and next steps for backup solutions projects.

• Identify and manage support issues; coordinate communications between various USPS operations groups and DELL EMC customer support staff to resolve complex issues.

• Create and update documentation for backup procedures, solutions, licensing and applicable project artifacts.

• Provide technical expertise through discussions and demonstrations,

• Provide periodic, informal, on-site knowledge transfer, as needed to other Data Protection group members and to designated USPS employees covering the management, normal operation, and maintenance of the backup infrastructure.
Additional Job Details:
Minimum Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below
: • Bachelor's degree and 5 years experience, but 9 years in lieu of degree will be considered.
• Minimum three years recent experience with DELL EMC Avamar backup and recovery product in a large, complex environment.
• Minimum three years recent experience with DELL EMC Data Domain backup and recovery products in a large, complex environment.
• Ability to monitor 15,000+ backup clients and 1000+ jobs daily including, identifying issues and taking corrective action.
• Strong working knowledge of Linux and Windows operating systems.
• Good working knowledge of Oracle and SQL database backups.
• Strong proven troubleshooting abilities in a large scale operational environment.
• Able to communicate effectively verbally and in writing; in English.
• Able to work with minimal direct supervision; be a sold technical self-starter.
• Must be able to obtain a Position of Public Trust Clearance – US Citizen or Permanent Resident (Green Card Holder), and must not have traveled outside the US for a combined total of 6 months or more in last 5 years. • Must have resided in the US for the last 5 years
• Local to the Eagan, MN area (this position does not provide relocation assistance) Preferred Qualifications: • Solid experience with Dell EMC Avamar SQL Plugin, VMWare proxy backups and AVE.
• Solid experience with Dell EMC Data Domain including: DDOS, DDBoost, DDMC • Experience with Oracle Databases using RMAN and DDBoost
• Experience with Dell EMC Data Protection Central (DPC)
• Experience with Dell EMC Data Protection Advisor (DPA)
• Recent experience with Dell EMC Networker
• Solid understanding of Ethernet Networking
• Solid experience with NFS and Storage Area Networking (SAN).
• Scripting knowledge including Bash shell, PERL and Python.
• Experience using Microsoft Visio • Familiarity with Microsoft SharePoint
• Familiarity with Service Now Ticketing system
• Familiarity with VMWare functionality

Job Number: x20190183
Job Location: Eagan, MN
Duration: 3 - 6 months
Input Date: 11/06/2019
Last Updated: 12/15/2019

Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience

Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 12/09/2019

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels.

Tasks may include:

Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
Support software project management and software supplier management functions.
Select, tailor and deploy processes and tools; establish metrics.
Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

Bachelor's degree in an engineering classification.

Experience with any of the following:

C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
Java Script, Python, shell, Perl Scripting languages
Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
Real Time, Embedded, ROTS, Doors, Agile
Unix, Linux Windows

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.

Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
Support software project management and software supplier management functions.
Select, tailor and deploy processes and tools; establish metrics.
Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

Bachelor's degree in an engineering classification.

Experience with any of the following:

C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
Java Script, Python, shell, Perl Scripting languages
Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
Real Time, Embedded, ROTS, Doors, Agile
Unix, Linux Windows

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.

Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*

We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.

All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared

Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Experience in Configuration Management (CM)

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent

Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.

Job Number: 175
Job Location: Orlando, FL
Rate: $80.00
Per Diem: yes split
Input Date: 10/16/2019
Last Updated: 12/06/2019

Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD - Engineer

Description:
Provide Engineering support for Core Stage 1/Stage 2 Creo and Creo Tools to include the following:
• Pro/Design Assembly, Detail, Cabling, Diagram & Manufacturing and surface modeling.
• Support in Windchill 9.0, Intralink, and PDM document management tools to meet stringent configuration management requirements per NASA and Aerospace standards.
• Support plans, schedules, conducts/coordinates detailed phases of the engineering or scientific work in a project, or perform work that involves conventional engineering or scientific practices. Typical work may include research, development, design, testing, logistics, analysis, production, maintenance, operation, planning, estimating, application, or standardization of engineering facilities, systems, structures, software applications, firmware, processes equipment, devices, or materials.
• Tools shall include Creo 4.0/5.0: machine, model design, Checker & updates with Top/Down large assembly experience, especially with simplified rep. family tables, skeleton/shrink wrap which allows for the efficient opening of large Creo models (with several thousand parts or more).
• Technical Check of design products

Candidate must be a U.S. Citizen.
This is a 2 month assignment with possible extensions

Job Number: 19-254
Job Location: Huntsville, AL
Rate: 62-92 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/04/2019

Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL

Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/

A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.

Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools

Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract

Location: Rockford, IL

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.

Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 10/03/2019
Last Updated: 11/15/2019

Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

CMM Operator

Description:
PDS Tech is hiring a CMM Operator in the Park City, KS area:

Summary Description: Responsible for performing day to day CMM Inspection of in-process components and other parts to ensure conformance to specifications and to support production on inspection issues.

Job Duties and Responsibilities:

Operate CMM inspection machine using PCDMIS software.
Maintain inspection plans and use programs.
Compare customer supplied models with Point Compare.
Set-up and inspect the complete range of product, tooling and fixtures.
Study inspection reports to determine adherence to drawings, specifications, processing procedures to insure quality of manufacture components.
Working knowledge of AS9102 FAI forms and processes to complete CMM portion.
Performs other duties as required by Quality Management.
Capable to perform In-Process or Final Inspection as needed.
Performs other duties as required by Quality Management.
Track gages and calibration of all tools in the CMM Lab.

Abilities:

Ability to run multiple CMM inspection machines.
Capable of outstanding judgment interpreting complex drawings and specifications.
Ability to create PC-DMIS program from customer provided engineering.
Cabable of troubleshooting programs using conventional methods of inspection.
Knowledge of CMM operations and PCDMIS programming.
Thorough understanding of geometric dimensioning and tolerance.
Microsoft office basic computer skills.
Both oral and written communication skills.
Understanding and performing quality inspection studies such as SPC, Gage R&R, Capability Studies, etc.
Ability to perform bench top inspections using manual gaging techniques.
Ability to communicate effectively with suppliers and internal colleagues via telephone and e-mail.
Understanding of MRP systems and experience in daily use.
Must be able to stand and sit for extended times.
Ability to climb onto bed of CMM machine to perform set-up and measurements.
Ability to lift up 50 pounds if needed.
Ability to work in a professional manner.

Level Requirements:

Minimum
- High school diploma or general education degree (GED).
- Minimum of 5 years of CMM and PC-DMIS programming experience.

Job Number: 1910107893
Job Location: Wichita, KS
Duration: 6 months
Input Date: 10/21/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Kelly McCoy
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP0hQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Laser Operator - SECOND SHIFT

Description:

Under the supervision of the Shop Manager, this position operates and maintains cutting laser for steel fabrication. This position may also perform other production activities, including but not limited to supporting the production team by assembling parts, operating machinery, and fabrication, as well as cleaning and maintaining equipment and the shop floor. This position may also be required to perform the functions of the Machine Shop helper as needed.

ESSENTIAL FUNCTIONS

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Operate CNC laser cutting machine and other machinery used in the production process, or assist other machine operators

Select and setup lenses based on material type/thickness, load programs, set machine parameters and proper fixtures to ensure optimal performance of the equipment

Establish proper stop location, adjust laser beam focal point

Create and edit laser cut files from drawings in various formats; prepare, layout, and array parts from the cut files in the laser software for optimal cutting speeds/yield

Manage and maintain files to ensure matching revision levels at all times

Provide great level of attention to detail and focus on the given task

Perform prescribed preventative maintenance on machines/equipment as needed

Perform all dimensional inspections

Detect and report defective materials or questionable concerns

Perform typical machine shop operations to support production and fabrication

MUST BE FAMILIAR WITH BASIC MACHINE FUNCTIONS TO PERFORM TASKS : 1 YEAR OF EXPERIENCE IS REQUIRED AND LISTED ON RESUME

Must be willing to accept and receive supervision and assistance with re to machine setup

Must be able to operate with minimal supervision once trained by following work instructions and standard operating procedures

Wear proper safety equipment and comply with company safety rules at all times

Make a positive contribution to maintaining a workplace that is healthy, safe, neat, tidy

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 19-42953
Job Location: Ridgeway, SC
Rate: 15.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-16 00:00:00.0
Input Date: 10/16/2019
Last Updated: 11/13/2019

Firm Name: NESCO RESOURCE
Attention: Andrea Moss
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Must be able to meet US Defense requirements.

Esprit, Applicon, programming and Solid Edge CAD highly desirable, MasterCam, Language based or Graphics based CAM programming is helpful.
Programming 4 and 5 axis Mill/Turn equipment is a plus.
Renishaw probe software experience is a plus.
Macro-B programming is a plus.
Varied CNC operating experience desirable.
Must have worked in CNC programming demonstrating a high degree of proficiency
General math, geometry, and trigonometry experience required.

Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 10/25/2019

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 10/25/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer Lead, Environmental/Sewer

Description:
*This is a full time salaried position, located in Mount Holly, NJ.*

*Full benefit package including bonus*

We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing and modelling sewer and storm water management/distribution, wastewater treatment, runoff and similar town/city infrastructure.

Work will include water and wastewater design experience including distribution, collection, pumping stations, public water supply wells, and treatment facilities. The position will have the applicant working in over 70 municipal entities in New Jersey.

Required:

*5 years’ experience in Environmental/sewer design engineer, stormwater runoff/drainage design or similar design and engineering projects.

*Experience working as a lead.

*Must reside within 1hr of Mount Holly, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT

Pluses:

*PE
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience

Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability

Job Number: 050
Job Location: MT Holly, NJ
Rate: DOE
Per Diem: yes split
Input Date: 11/04/2019

Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Client Support Representative

Description:
This is NOT a helpdesk role troubleshooting computer software or Microsoft Word etc. This is a Client Support Role assisting Elan Business Clients such as Banks and Credit Unions transition from one system to another. In this role Client Tech Support Reps are doing training on the new system along with assisting users with it. B2C experience preferred.
The Client Tech Support Rep is an active participant in a high profile Card Services integration initiative. The position will have a wide variety of responsibilities throughout the course of the project, making a willingness to do whatever it takes a must. The ideal candidate has a strong customer service background, excellent verbal and written communication skills, desire and capability to troubleshoot issues, and is extremely well organized. Knowledge of EFT industry experience a must.
As a dedicated Client Technical Support Rep you will be responsible for transitioning Elan business clients such as Banks or Credit Unions from one system to another. This would include Training, Support, and Troubleshooting.
•Primary contact responsible for proactive communication related to the project for clients and company Business partners
•Ensures client understanding of outgoing communications related to the project
•Provides timely and accurate responses to a wide range of questions and concerns
•Provides daily client support as necessary during the course of the project
•Responsible for client problem resolution following defined processes
•Ability to gather appropriate information from the client or via applicable company tools
•Proactively solicits input from other departments and account processors as necessary to ensure
timely problem resolution
•Ability to track status of outstanding customer deliverables and follow up accordingly
•Responsible for initiating and leading internal and external meetings as necessary for a variety of reasons throughout the course of the project
•Assists in development of materials necessary to support the project, including documentation/procedures and educational materials
•Participates in continuous process improvement discussions as a means to advocate for the client experience, improve overall service and quality, and deliver training as needed

Required Qualifications:
•High school diploma required, bachelor’s degree strongly preferred
Job Related Experience:
•2+ years Electronic Fund Transferring Industry experience preferred
•Banking or Credit Union back office support would be very helpful.
•Demonstrated experience supporting customers in a fast-paced environment

Additional Skills/Knowledge:
•Strong organizational and prioritization skills to manage multiple projects and internal/external clients in a fast-paced environment
•Demonstrated experience making decisions and solving problems complex in nature and for which there may be no precedent
•Ability to work independently as well as perform as a strong team player
•Excellent written and verbal communication skills
•Ability to adapt to a changing environment
•Proficient in Microsoft Excel and Word
•Ability to travel (less than 10%) and work extended hours as needed

Job Number: 1910105971
Job Location: Chicago, IL
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 12/13/2019

Client Support Representative

Description:
This is NOT a help desk role troubleshooting computer software or Microsoft Word etc. This is a Client Support Role assisting Elan Business Clients such as Banks and Credit Unions transition from one system to another. In this role Client Tech Support Reps are doing training on the new system along with assisting users with it. Business to Client experience preferred.

About the Role:
The Client Tech Support Rep is an active participant in a high-profile Card Services integration initiative. The position will have a wide variety of responsibilities throughout the course of the project, making a willingness to do whatever it takes a must. The ideal candidate has a strong customer service background, excellent verbal and written communication skills, desire and capability to troubleshoot issues, and is extremely well organized. Knowledge of Fiserv systems or EFT industry experience a must.
As a dedicated Client Technical Support Rep, you will be responsible for transitioning Elan business clients such as Banks or Credit Unions from one system to another. This would include Training, Support, and Troubleshooting.
• Primary contact responsible for proactive communication related to the project for clients and company Business partners
• Ensures client understanding of outgoing communications related to the project
• Provides timely and accurate responses to a wide range of questions and concerns
• Provides daily client support as necessary during the course of the project
• Responsible for client problem resolution following defined processes
• Ability to gather appropriate information from the client or via applicable company tools
• Proactively solicits input from other departments and account processors as necessary to ensure
timely problem resolution
• Ability to track status of outstanding customer deliverables and follow up accordingly
• Responsible for initiating and leading internal and external meetings as necessary for a variety of
reasons throughout the course of the project
• Assists in development of materials necessary to support the project, including
documentation/procedures and educational materials
• Participates in continuous process improvement discussions as a means to advocate for the client experience, improve overall service and quality, and deliver training as needed

Required Qualifications:
• High school diploma required, bachelor’s degree strongly preferred
Job Related Experience:
• 2+ years of Electronic Fund Transfer Industry experience preferred
• Banking or Credit Union back office support would be very helpful.
• Demonstrated experience supporting customers in a fast-paced environment

Additional Skills/Knowledge:
• Strong organizational and prioritization skills to manage multiple projects and internal/external clients in a fast-paced environment
• Demonstrated experience making decisions and solving problems complex in nature and for which there may be no precedent
• Ability to work independently as well as perform as a strong team player
• Excellent written and verbal communication skills
• Ability to adapt to a changing environment
• Proficient in Microsoft Excel and Word
• Knowledge of company processing environments preferred
• Ability to travel (less than 10%) and work extended hours as needed

Job Number: 1910108534
Job Location: Beaverton, OR
Duration: 12 months
Input Date: 10/25/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSNmQAM&URLSource=cjhunter

Client Support Representative

Job Number: 1910105952
Job Location: Beaverton, OR
Duration: 12 months
Input Date: 10/25/2019
Last Updated: 12/13/2019

Combat AirCraft Training Spec 5

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:

Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

Job Number: 1910105893
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVqQAO&URLSource=cjhunter

Combat AirCraft Training Spec 5 - G

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:

Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

Job Number: 1910105894
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 12/13/2019

Combat AirCrft Trng Spec 5 -

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:

Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

Job Number: 1910105892
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/19/2019
Last Updated: 12/13/2019

Combat Aircraft Training Specialist - Secret

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:

Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

Job Number: 1910105895
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 12/13/2019

Combat Aircraft Training Specialist 5

Description:
Chipton-Ross is seeking a Combat Aircraft Training Specialist 5 for an openings in Saint Louis, MO.

RESPONSIBILITIES:
EA-18G highly experience Pilot Subject Matter Expert to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

EDUCATION:
Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 181309
Job Location: Saint Louis, MO
Rate: $DOE
Duration: 4 Months
Input Date: 08/27/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Daniel McGowan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmcgowan@chiptonross.com
Website: www.chiptonross.com

Composite Tooling Engineer

Description:
This position will support manufacturing activity for 787, MRJ, A320NEO, C-Series, A350 and legacy programs. Using CATIA V5 and simulation software, candidate will be required to run producibility on composite layups, make appropriate ply edits according to engineering notes and specifications. Plies must be spliced and flat patterns developed according to tool order requirements. Candidate must have knowledge of laser projection and flat pattern exports. Candidate must have experience using Virtek laser projector systems and be able to troubleshoot ply projection issues on the fly. Responsible for keeping production laser projectors running and maintaining up to date part (.ply) and tool (.cal) laser projector files. Candidate should have adequate knowledge of composite sandwich structure construction and hand lay-up techniques. Candidate must have excellent written and oral skills and have an expert knowledge of CATIA V5. Strong working knowledge of FiberSim (ACEE/CEE) and Composites Design Workbench (CPM/CPE) is required. In Catia V5, must have experience in Part Design, Assembly Design, and Generative Shape Design. Must have knowledge of ENOVIA, Teamcenter, SAP, Microsoft Office Suite software.
Duties include:

Retrieving tool orders from SAP
Downloading engineering and tool designs from ENOVIA and Teamcenter
Using FiberSim and CPM to simulate composite layups
Optimizing ply producibility for better fitment over complex surfaces
Enhancing soft tooling surfaces for ply producibility simulation processes
Exporting laser projection and flat pattern files
Troubleshooting Virtek laser projector hardware and software issues
Maintaining central network of Virtek data
Creating Virtek calibration files for an assortment of tooling

Qualifications:
10,000 hours min of CATIA V5
2,000 hours min of FiberSim (CEE)
2,000 hours min of Composite Manufacturing Workbench (CPM)

Job Number: 1910105903
Job Location: Riverside, CA
Duration: 12 months
Input Date: 08/21/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYWyQAO&URLSource=cjhunter

Configuration Controller

Description:
Chipton-Ross is seeking a Configuration Controller for an opening in Huntsville, AL.

RESPONSIBILITIES:
Under limited supervision, this position is responsible for coordinating and administering complex configuration management activities. Identifies controls and accounts for systems and/or equipment as required by contractual or other requirements. Releases, updates, archives and distributes the latest revisions of engineering designs for multiple projects ensuring accurate, clear, concise and valid documentation and documentation records.
" Compiles test, graphics, and data for reviews and makes recommendations on the formatting and presentation of software design documents that are submitted.
" Coordinates complete submission of documentation supporting the contract effort. Confers with engineering staff to highlight areas where additional work is needed. Determines when and what documents should be archived or transferred to a different medium for storage.
" Establishes procedures in support of project management and/or QA; makes recommendations for improving efficiency in the production of software design documentation and reports to be more timely and complete. Provides periodic updates and summary data on status and progress of projects, as well as data for forecasting purposes.
" Ensures customer requirements are implemented and monitors configuration accounting changes to ensure compliance with policy.
" Reviews and analyzes engineering change data. Coordinates changes with all applicable activities, including manufacturing, quality, engineering, etc.
" Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
" Performs other duties as assigned or required.

REQUIRED EXPERIENCE:
o Must be able to perform a variety of non-routine tasks and demonstrate general knowledge of configuration control procedures, theories and concepts.
o Ability to manage, release, and archive Software baselines strongly preferred.
o Must possess: (1) the ability to coordinate work assignments to meet project milestones or established completion dates; (2) the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; (3) ability to read, analyze and interpret blueprints, drawings, schematics and technical orders; (4) analytical, interpersonal, verbal and written communication skills to accurately document, report and asses situations; and (5) good computer skills.
o The ability to work both independently and in a fast-paced team environment is essential as is the ability to work extended hours and travel as required.

EDUCATION:
Accredited Associate's degree or equivalent and two or more years progressively more complex experience in configuration control. Equivalent professional experience may be substituted in lieu of education.

WORK HOURS:
5/40
Full-Time

Job Number: 182524
Job Location: Huntsville, AL
Rate: $DOE
Duration: 3 Months
Input Date: 10/22/2019
Last Updated: 12/15/2019

Configuration Controller

Description:
Chipton-Ross is seeking a Configuration Controller for an opening in Englewood, CO.

RESPONSIBILITIES:
" Compiles test, graphics, and data for reviews and makes recommendations on the formatting and presentation of software design documents that are submitted.
" Coordinates complete submission of documentation supporting the contract effort. Confers with engineering staff to highlight areas where additional work is needed. Determines when and what documents should be archived or transferred to a different medium for storage.
" Establishes procedures in support of project management and/or QA; makes recommendations for improving efficiency in the production of software design documentation and reports to be more timely and complete. Provides periodic updates and summary data on status and progress of projects, as well as data for forecasting purposes.
" Ensures customer requirements are implemented and monitors configuration accounting changes to ensure compliance with policy.
" Reviews and analyzes engineering change data. Coordinates changes with all applicable activities, including manufacturing, quality, engineering, etc.
" Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
" Performs other duties as assigned or required.

REQUIRED EXPERIENCE:
o Must be able to perform a variety of non-routine tasks and demonstrate general knowledge of configuration control procedures, theories and concepts.
o Ability to manage, release, and archive Software baselines strongly preferred.
o Must possess: (1) the ability to coordinate work assignments to meet project milestones or established completion dates; (2) the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; (3) ability to read, analyze and interpret blueprints, drawings, schematics and technical orders; (4) analytical, interpersonal, verbal and written communication skills to accurately document, report and asses situations; and (5) good computer skills.
o The ability to work both independently and in a fast-paced team environment is essential as is the ability to work extended hours and travel as required.

EDUCATION:
Accredited Associate's degree or equivalent and two or more years progressively more complex experience in configuration control. Equivalent professional experience may be substituted in lieu of education

WORK HOURS:
5/40
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182486
Job Location: Englewood, CO
Rate: $DOE
Duration: 3 Months
Input Date: 10/21/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

Configuration Controller

Description:
Chipton-Ross is seeking a Configuration Controller for an opening in Rancho Bernardo, CA.

RESPONSIBILITIES:
" Compiles test, graphics, and data for reviews and makes recommendations on the formatting and presentation of software design documents that are submitted.
" Coordinates complete submission of documentation supporting the contract effort. Confers with engineering staff to highlight areas where additional work is needed. Determines when and what documents should be archived or transferred to a different medium for storage.
" Establishes procedures in support of project management and/or QA; makes recommendations for improving efficiency in the production of software design documentation and reports to be more timely and complete. Provides periodic updates and summary data on status and progress of projects, as well as data for forecasting purposes.
" Ensures customer requirements are implemented and monitors configuration accounting changes to ensure compliance with policy.
" Reviews and analyzes engineering change data. Coordinates changes with all applicable activities, including manufacturing, quality, engineering, etc.
" Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
" Performs other duties as assigned or required.

REQUIRED EXPERIENCE:
o Must be able to perform a variety of tasks and demonstrate a basic understanding of configuration control principles, theories and concepts.
o Must possess: (1) ability to coordinate work assignments to meet project milestones or established completion dates; (2) the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; (3) ability to read and interpret blueprints, drawings, schematics and technical orders; (4) interpersonal, verbal and written communication skills to accurately document and report finding; and (5) good computer skills
o The ability to work both independently and in a fast-paced team environment is essential as is the ability to work extended hours and travel as required.

EDUCATION:
Accredited Associate's degree or equivalent and two or more years progressively more complex experience in configuration control. Equivalent professional experience may be substituted in lieu of education

WORK HOURS:
5/40
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182487
Job Location: Rancho Bernardo, CA
Rate: $DOE
Duration: 3 Months
Input Date: 10/21/2019
Last Updated: 12/15/2019

Configuration Data Manager

Description:
PDS Tech is seeking a Configuration Data Management Specialist in St. Louis, MO

Job Purpose

Direct support of Configuration Management related activities. Focus on various aspects related to software/hardware CM including, but not limited to, tracking, logging, categorizing, and maintaining changes made against accepted standards. Develop business metrics and reports needed by management. Responsible for maintaining all files for engineering drawings, processes and other related documentation.

Principal Accountabilities

Support the organization in developing data / information links and data structure to facilitate integration of company information systems and integrated metrics.
Regularly review processes; considering evolving internal policy and external processes.
Assess procedures for developing records management plans.
Maintain record copies of all applicable plans and deliverables.
Assess operation of source code libraries.
Analyzes data in company systems to produce meaningful management information.
Determines the most efficient way to collect data on a regular basis and leads the process.
Develops metrics from data gathered to generate regular and ad hoc reporting.
Leverages data consistency and accurately throughout the organization.
Interfaces with teams in different parts of the organization, including Information Technology, Engineering, Supply Chain and Finance to foster the integration of data and business processes.

***Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss.
Education

B.S. degree in Business Administration, Engineering or Operations.Combination of education and experience may be considered in lieu of degree.

Experience and Qualifications

Three to five years of experience in Configuration or Data Management
Five to seven years of experience in manufacturing or engineering, working with Key Performance Indicators (KPI’s)
Proficient in ERP and/or PLM systems
Experience with document examination, such as engineering drawings, change orders and specifications to verify conformance.
Active DOD Secret Clearance is required to be considered, investigation close date must be within the last 5 years.

***Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss.

Job Number: 1910105336
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 08/09/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPdQAO&URLSource=cjhunter

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO.

Job Summary

This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities

Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates

Prepare analysis and verification of product costs in support of special projects from the engineering group
Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss.

Required Qualifications:

Must have an Active DoD Secret Clearance
Excellent computer skills (EXCEL, PowerPoint, & Word).
Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
2 years of experience in estimating techniques or labor time standard development
Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications

Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
Understanding of contractual agreements (FAR, TINA).
Strong analytical and planning skills
Excellent computer skills (MS Office Suite).
Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss

Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

Customer Training Specialist

Description:
PDS Tech, Inc. is seeking a Customer Training Specialist in Ridley Park, PA.

Summary:

The CH-47F Avionics / Electrical Systems Customer Training Specialist will be part of the CH-47 Training Services Team, supporting the development and delivery of differences training materials in support of direct commercial sales of the CH-47 Chinook.
The CH-47F Avionics / Electrical Systems Customer Training Specialist will conduct analyses of released engineering documentation and other source materials to evaluate customer technical training needs and determine appropriate training content, objectives, and design.
They will use specialized software technology to research, configure, maintain, update and develop new and existing media and materials utilizing established Style Guides and training material approval processes.
The CH-47F Avionics / Electrical Systems Customer Training Specialist is also expected to conduct and evaluate the effectiveness of technical training within their specialized area of expertise as part of a comprehensive training program to existing and future customers as required.

Prerequisites:

Possess 5+ years of recent knowledge of CH-47F Avionics and Electrical systems as related to operation, testing and maintenance.
CH-47F courseware development and/or technical instructor experience is highly preferred.
Combination of education and experience.
Jet transport category flight and instructor experience preferred.

Category	Name	Required	Level
Areas of Expertise	Design/Create Training Material	Yes	Intermediate
Areas of Expertise	Interpret schematics, assembly drawings, technical manuals	Yes	Intermediate
Software Skills	MS PowerPoint	Yes	Intermediate
Software Skills	MS Word	Yes	Intermediate

Job Number: 1910106161
Job Location: Ridley Park, PA
Duration: 9 months
Input Date: 08/30/2019
Last Updated: 12/13/2019

Cyber Software Engineer

Description:
PDS Tech, Inc. is seeking am Cyber Software Engineer in Baltimore, MD.
Description:

Roles and Responsibilities:
Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met. Java and Nifi are highly desired.

Qualifications: Targeted Skills:
- Java and other high level development languages
- NiFi
- Linux OS
- Scripting Languages (Javascript, Perl, PHP, Python, Ruby, etc...)

Education: B.S. in Computer Science or other STEM field or 4 years of relevant software development/engineering experience in lieu of degree

Security Clearance: Active TS/SCI w/Polygraph

Desired Additional Skills/Backgrounds:
- Cyber Security
- RESTful
- Agile
- Jira
- C/C++
- Python
- Cloud (Apache Hadoop/AWS)
- Cloud development certification
- Spring
- Angular
- Test Automation
- Android app development
- UI/UX
- Database Administration

Job Number: 1910104515
Job Location: Annapolis, MD
Duration: 12 months
Input Date: 07/16/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTvLQAW&URLSource=cjhunter

Cyber Systems Software Engineer-TS/SCI w/Polygraph, Annapolis MD 21401

Description:
PDS Tech, Inc. is seeking a Cyber Systems Software Engineer in Baltimore, MD 21401. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
12 month contract with possible extensions. Must have an Active TS/SCI w/Polygraph
Description:
Roles and Responsibilities:

Technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications
Qualifications: Targeted Skills:
- Requirements
- Dataflow
- Test Automation
- Linux OS
- Scripting Languages (Javascript, Perl, PHP, Python, Ruby, etc...)
- Virtualization

Education: B.S. in related STEM field or 4 years of relevant systems engineering experience in lieu of degree

Security Clearance: Active TS/SCI w/Polygraph

Job Number: 1910104514
Job Location: Annapolis, MD
Duration: 12 months
Input Date: 07/24/2019
Last Updated: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database Admin II

Description:
We have an outstanding Contract to Hire position for a Database Administrator to join a leading Company located in the O'Fallon, IL surrounding area.

** Candidate must be able to obtain and maintain a Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
Serves as a Development Lead for multifaceted reengineering of systems to support business operations.
Designs develop and manage the implementation of cloud-based and SOA based Integrated Booking System framework, methodology, and tools to ensure business continuity of operations across a large, multi-division, decentralized organization.
Supports multi-language, multi-platform, and multi-operating system operations and utilizes electronic commerce and Electronic Data Interchange (EDI) applications.
Recognizes and recommends new or emerging technology or software to satisfy functional requirements and processes.
Provides highly technical and/or specialized guidance concerning automation solutions to complex information processing problems related to the subject field.
Provides customer support using enterprise solutions software to integrate business areas, consistent with today’s technology in order to operate in an open systems environment and client service architectures.
Performs high-level, day-to-day operational maintenance, support, and upgrades for complex database management systems workstations and servers on multiple operating systems. Implements and maintains smooth operation and physical design of databases.
Coordinates direct and performs complex database software installations and upgrades to operating systems and related database software packages.
Schedules installations and upgrades and maintains them in accordance with established IT policies and procedures.
Continually monitors and tunes multiple database systems and databases to achieve optimum performance levels.
Ensures database data integrity by evaluating, implementing, and managing appropriate solutions of varying complexities.
Ensures database recoverability by developing and implementing a schedule of database backups and archive operations.
Plans and implements the modernization of database implementations.
Develops, implements, and promotes standard operating procedures and schedules.
Conducts audits of databases to ensure compliance with established standards, policies, and configuration guidelines.
Develops and implements new standards, policies, and procedures.

Basic Hiring Criteria:
Bachelor's and five (5) years or more experience; Masters and three (3) years or more experience; Ph.D. and 0 years related experience.
Complete understanding and wide application of technical principles, theories, and concepts in the field.
General knowledge of other related disciplines.
Receives assignments in the form of objectives and establishes goals to meet outlined objectives.
Work is reviewed by management to measure whether objectives have been met.
Provides technical solutions to a wide range of difficult problems where analysis of data requires evaluation of identifiable factors.

Job Number: 38518
Job Location: O'Fallon, IL
Rate: $51.17
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 11/12/2019

Firm Name: TAD PGS INC
Attention: Amy Dawkins
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Oklahoma City, OK
2019-10166
Responsibilities:
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
• Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
• This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
• Other job responsibilities may include
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Work under consultative mentorship.

Qualification:
• This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
• Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
• Willingness to travel at least 25% of the time as required
• Highly motivated and must work well in a team environment.
• The ability to communicate effectively, both verbally and in writing
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2019-10166
Job Location: Oklahoma City, OK
Input Date: 11/06/2019

Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-10125
Responsibilities:
• Lead work with customers to develop and document complex electronic and electrical system requirements.
• Lead and coordinate work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test and validate to ensure system designs meet operational and functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Understand and apply job practices, techniques, standards, principles, theories, and concepts.
• Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements.
• Develop statement-of-work and technical performance specifications.
• Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle.
• Test and validate to ensure system designs meet operational and functional requirements.
• Resolve product integration issues and production anomalies.
• Support fielded hardware and software over the entire product lifecycle.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.

Qualification:
• The ability to obtain a Secret Securiy Clearance is required at time of hire.
• Must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired.
• Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired.
• Ability to provide technical coordination with internal and external suppliers and customers is a plus.
• Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred.
• Knowledge of data system design, and architectures is desired.
• Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 9+ years of experience, or a Master's Degree with 7+ years of experience, or a PhD with 4+ years of experience.
• Bachelor's degree in electrical or computer engineering is highly desired
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!

Job Number: 2019-10125
Job Location: Berkeley, MO
Input Date: 11/04/2019

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
OKC is on 9/80 work schedule.

Job Number: 181349
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 08/29/2019
Last Updated: 12/15/2019

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer in Berkeley, MO.

Summary:

Position Responsibilities:

•Understand and apply job practices, techniques, standards, principles, theories, and concepts

•Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements

•Develop statement-of-work and technical performance specifications

•Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle

•Test and validate to ensure system designs meet operational and functional requirements

•Resolve product integration issues and production anomalies

•Support fielded hardware and software over the entire product lifecycle

•Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

•Monitor supplier performance to ensure system integration and compliance with requirements

Prerequisites:

Preferred Qualifications (Desired Skills/Experience):

•Bachelor's degree in electrical or computer engineering is highly desired

•Applicants must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired

•Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired

•Ability to provide technical coordination with internal and external suppliers and customers is a plus

•Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred

•Knowledge of data system design, and architectures is desired

•Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired

Job Number: 1910108542
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 10/25/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Dave Goetz
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSReQAM&URLSource=cjhunter

Design and Analysis Engineer 4

Description:
PDS Tech, Inc. is seeking a Structural Analysis Engineer in Oklahoma City, OK.

Summary:

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
•Leads work with customers to develop and document complex electronic and electrical system requirements.

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.

•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.

•Researches technology advances for potential application to company business needs.

•Makes recommendations for technology investments.

•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 1910108239
Job Location: OK City, OK
Duration: 6 months
Input Date: 10/25/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQW6QAM&URLSource=cjhunter

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

�Leads work with customers to develop and document complex electronic and electrical system requirements.
�Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
�Leads work to test and validate to ensure system designs meet operational and functional requirements.
�Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
�Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
�Researches technology advances for potential application to company business needs.
�Makes recommendations for technology investments.
�Works under minimal mentorship.

EDUCATION:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Job Number: 182602
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM

Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 12/15/2019

Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 5

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Other job responsibilities may include

• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.

• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.

• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.

• Works with other to develop program test strategies.

• Manages performance of critical suppliers to ensure system integration and compliance with requirements.

• Conducts program independent reviews and reports results to program leadership.

• Provides critical support of fielded hardware and software over the entire product lifecycle.

• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.

• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

• Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Job Number: 1910108677
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJWQA2&URLSource=cjhunter

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 for an opportunity in Oklahoma City, OK

RESPONSIBILITIES:
� Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
� Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
� Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
� Works with other to develop program test strategies.
� Manages performance of critical suppliers to ensure system integration and compliance with requirements.
� Conducts program independent reviews and reports results to program leadership.
� Provides critical support of fielded hardware and software over the entire product lifecycle.
� Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
� Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
� Works under consultative mentorship.

REQUIRED EXPERIENCE:
Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

Job Number: 182841
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/06/2019
Last Updated: 12/15/2019

Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/06/2019
Last Updated: 12/04/2019

Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

DevOps Development Engineer, Parsippany, NJ 07054

Description:
PDS Tech has positions for Software Development Engineers, Parsippany, NJ 07054. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
6 month contract with possible extensions. Must be a US Citizen or Green Card Holder to qualify. No C2C

DevOps engineer with continuous integration experience to help with automation of complex installations on multiple environments.
The candidate must be able to work in a Linux environment with previous experience programming in bash and python.
Experience configuring Jenkins jobs and Weblogic or other JEE application server experience highly desired./

Position Purpose:
• The EPS DevOps Engineering team is responsible for a large CI/CD Jenkins local environment that runs thousands of regression jobs per day across hundreds of Jenkins nodes. The team also uses Docker to deploy applications to multiple cloud environments (AWS, Oracle Cloud) to support integration testing, training and client testing
• The DevOps Engineer will work with the existing environment and help drive the transformation and modernization efforts to migrate and extend functions to the cloud.
• Migrating applications to a cloud environment requires experience deploying enterprise applications to cloud providers such as AWS, Azure, or Oracle Cloud and proficiency with scripting and automation for those deployments.
• The ideal candidate will exhibit strong skills, will be forward thinking, will be self-motivated, and will be able to work effectively in a diverse, highly talented team, continuously striving for excellence.
• The ideal candidate will have the ability to work across a multitude of technical and non-technical groups.

Essential Job Responsibilities:
• Design cloud solutions using Identity, Storage, Compute, Automation, and Networking features to support deployments of applications to the cloud.
• Maintain and enhance CI/CD internal Jenkins environment.
• Support developers, quality assurance and business analysts using the Jenkins environment.
• Support users and external clients working on applications deployed to the cloud environment.
• Work and continuously improve the DevOps pipeline and tooling to provide active management of the continuous integration/continuous deployment processes.

Education:
• Bachelor’s Degree in Computer Science or related technical field experience and 4+ years of professional work experience in a similar field.
Job Related Experience:
• 2+ years experience deploying Java EE based applications in public/private/hybrid cloud environments.
• 2+ years experience in Automation/Continuous Integration preferably using Jenkins
• 3+ years solid experience working with Linux, writing shell scrips
• 2+ years solid experience working with Docker
• Programming experience with Python and Groovy/Java highly desired
• Experience working with Java application servers (Weblogic, WebSphere, JBoss)
• Concurrent Versioning Software (Git, GitHub, Mercurial)
• Expertise in one or more infrastructure subject areas of virtualization, security, networking, storage, monitoring.
• Willingness and capability of quickly learning new technologies required for accomplishing project goals.
• Ability to evaluate and prioritize work for expediting business value delivery over perfection.
• Ability to work efficiently and productively without direction or guidance

Job Number: 1910107355
Job Location: Parsippany, NJ
Duration: 6 months
Input Date: 10/07/2019
Last Updated: 12/13/2019

DevOps Application Administrator 2- Secret

Description:
PDS Tech, Inc. is seeking a Systems Design & Integrated Specialist. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com

LOOKING FOR DevOps Application Administrator to join Software Engineering Environment team.
As an Application Administrator, you will be responsible for the operation & maintenance of our DevOps toolchain across our Secure Digital Transformation Environment (SDTE) and will work closely with various business and IT teams.
You will work with business partners define business objectives, make best practice recommendations, address future needs. The ideal candidate will be one which enjoys working in a fast-paced, dynamic environment, and thrives on being collaborative while solving hard problems.

Work Location can be: St. Louis, MO OR Kent, WA OR Charleston,SC
Have multiple positions with various skill and experience level 2
12 month contract with possible extensions. Must be a US Citizen and have an Active Secret Clearance to qualify.

Summary:
• Build strong relationships with key business stakeholders across multiple business units and be their trusted advisor
• Work with the business, service managers, and the IT delivery teams to ensure that business needs are prioritized, understood, and supported in a timely matter
• Collaborate with key business stakeholders to translate business strategies and objectives into capabilities and present solution concepts for input, buy-in, and sign off
• Ability to work independently to determine approaches to solutions
• Work with key organizations (e.g. Networking, Information Security)

Primary responsibilities:
• Assist with creating, managing, and supporting all administrative functions associated with multiple DevOps tools (e.g. Atlassian application stack, JFrog-Artifactory, SmartBear, etc)
• Assist in the creation and management of Atlassian plug-in components
• Gather requirements from users, propose solutions that meet business needs, and deliver agreed upon solutions
• Assist with the development, testing and deployment of integrations between DevOps tools and other internal systems
• Maintain an up-to-date knowledge of DevOps standard tools, administration best practices, and agile methodology best practices
• Ensure systems are stable and available and that user issues are addressed in a timely manner
• Ability to work a rotational on-call schedule
Basic qualifications:
• Technical Bachelor's degree or higher
• This position requires a US Security Clearance for which the US Government requires US Citizenship
• Experience with Linux and/or Unix and Windows operating systems including system administration experience
• Scripting experience (Shell, PERL, Python, or similar)
• Working knowledge of web application structure (app servers, DBs, SQL, etc.)
• Microsoft Active Directory Administration and Group Policies implementation and development

Desired experience, skills & qualifications:
• Experience with server admin tools like (e.g. Putty)
• Experience managing virtualized infrastructure
• Experience with System Configuration Management
• Experience working with Government customers and Government Classified systems
• Strong customer focus, with the ability to work across cross functional, diverse teams
• Experience with general programming (C, C++, Java)
• Experience working with DevOps applications stack (Atlassian - Bamboo, Bitbucket, Confluence, JIRA; Jfrog, Jenkins, Smartbear)
• Experience with automation / working knowledge of Ansible
• Strong understanding of Application Lifecycle Management
• Experience with Scaled Agile Framework or Agile Methodologies
• Experience with network technology, storage systems
• Experience with System Configuration Management
• Experience with Cloud technologies
• Experience with Load Balancing (Preferably F5)
• VMware vShphere implementation and experience
• Experience with Security requirements

Job Number: 1910107540
Job Location: Kent, WA
Duration: 12 months
Input Date: 10/10/2019
Last Updated: 12/13/2019

Development Engineer

Description:
PDS TECH INC is currently looking for a Development Engineer for our client in Santa Clarita.

Responsibilities include perform and report on testing relating to the development of engines, engine systems or other powertrain systems as required.
Collect Data from testing on dynamometers, test rigs, and any other external test facilities.
Subsequent analysis and reporting is required.
Development may include performance, cost function, drivability and/or reliability of engines, engine systems and/or powertrain components per project goals.
Must complete writing test requests, daily progress reports and test reports.
Present a concise presentation of testing results, analysis, conclusions and suggestions for future development as needed.

Requirements are: BS degree in (Mechanical/Electrical) Engineering with relevant automotive focus in studies and activities preferred.
1 to 3 years’ experience with Formula SAE or similar automotive or motorsports related projects a plus;
Experienced with 3D CAD software and reading schematic drawings.
Must have strong data analysis, problem-solving and report writing skills. Ability to utilize on-car data analysis software (logged data, telemetry, etc.); program software (MATLAB/Simulink, C+, Visual Basic, etc.) and analyze with simulation tools such as FEA, CFD, etc.
Must have the ability to work in team environment with minimal supervision, be self directed, detailed oriented.

If you are interested, please call DJ 714-384-0004 and send resume to: denglert@pdstech.com

Job Number: 1910108702
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 11/07/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTNsQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Diagnostics Engineer

Description:
Diagnostics Engineer responsible for conducting detailed analyses and assessments of evolving and approved designs in support of the development of troubleshooting support documentation. This may include:

1. Interfacing with hardware and software design engineers to understand the functionality of equipment.

2. Conducting detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to fault isolate/troubleshoot and support the design.

3. Translating engineering & other technical information into troubleshooting source data (procedures and schematics) in support of Integrated Logistics Support (ILS) product development.

4. Performing on-vehicle fault insertion to verify that equipment and troubleshooting procedures function properly.

Job Number: 47487
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 10/31/2019

Documentation Control Associate III

Description:
Creates and/or improves existing documentation procedures, and streamline across various product teams. Establishes and maintains consistency of databases and documentation as well as corporate processes used to ensure quality, design requirements, and environmental compliance. Manages and maintains as well as analyzes and interprets the consistency for all documentation and support systems to ensure quality. Follows established procedures and formats, researches and compiles technical data for use in routine documents or sections of documents such as manuals, procedures and specifications. Obtains data and information from review of documentation, drawings, schematics and reports, consultation with technical staff members. Typically requires 5-7 years of experience. Provides more technical/functional support than administrative support. Demonstrates a thorough working knowledge of technology, applications, terminology, and procedures required of job function. Performs varied and more complex tasks. Makes decisions within broad parameters.

SCOPE OF WORK

This position serves as a resource on the Project Management team and provides administrative and technical support for large capital projects managed by Our Client's PMT team. Experience with project management and collaboration systems is preferred.

Our Client' project management systems include:

•             SAP and SharePoint primarily; experience with these systems are preferred but not required.
•             Must have a functional understanding of electronic data management.
•             Functional understanding of project execution and phase gates is preferred.
•             Experience working on Alaska or other arctic projects is preferred.
•             Project support involves multiple tasks that are schedule driven. Strong organizational and communications skills are critical to effectively supporting our clients. This position supports a wide area network of resources assigned to Our Clients projects.
•             Strong interpersonal skills are necessary to respond to various project support requests.
•             Training is provided on Our Clients project management systems. Experience with other project management systems is preferred.

Category	Name	Required	Importance
Certifications	ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code for Materials (BPVC-II)	Yes	5
Education	Bachelor's Degree in Mechanical Engineering	Yes	2
General	Knowledge of ASME (American Society of Mechanical Engineers) Piping Codes	Yes	1
General	Oil and Gas Industry	Yes	3
General	Knowledge of ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel (BPV) Codes	No	5
General	Knowledge of Heavy Industrial Manufacturing Operations	No	5
Software	MS Office	Yes	4

Additional Competencies:

• Knowledge of CPAI criteria and specifications
• Knowledge of ASME piping codes B31.3, 31.4, and 31.8
• Knowledge of API piping inspection and repair (570)
• Familiarity with DOT, ADEC, and SPCC regulations
• Capable of performing pipe stress and flexibility analyses (preferably using AutoPIPE software)
• Good written and oral communication skills

Job Number: 1910104590
Job Location: Anchorage, Ak
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: PACIFIC OFFICE CENTER
310 K ST STE 200
City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUAeQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter & Prepress Technician

Description:
Job purpose

This is a newly created hybrid role that will play a big part in the future success of our organization. Overarching responsibilities include the creation of detailed panel and elevation drafting including high-resolution graphics along with the preparation of print files from standard and customer supplied art for digital print production.

Duties and responsibilities

Panel and Elevation Drafting

Analyze internal request details along with customer supplied details.

Work with Inside Sales department to rectify issues with customer-supplied information.

Prepare individual panel drawings and elevations in Adobe Illustrator.

Create low-resolution FPO images in Adobe Illustrator or Adobe Photoshop from standard or customer supplied art files for placement in individual panel drawings and elevations.

Ensure all drawings and elevations accurately display the products we intend to make.

Verify that all drawings and elevations show only what we can produce.

Preparing High-Resolution Graphics for Production and Archiving

Analyze customer supplied art files for correct format and resolution.

Work with Inside Sales and Manufacturing departments to ensure all aspects of the job are being considered for timely and correct completion.

Prepare full-size high-resolution graphics in Adobe Illustrator and Adobe Photoshop for production by sizing and scaling appropriately.

Monitor job output and ensure color match and consistency to house standards.

Document all pertinent settings used for job production to ensure repeatability.

Perform archive and file maintenance duties as needed.

Qualifications

Proficient in the latest versions of Adobe Illustrator and Adobe Photoshop, preferably on Mac.

Advanced skills and knowledge of Adobe Illustrator, 3 years' experience or greater.

Prior drafting experience.

Ability to work cross-platform Mac and PC.

Strong color correction skills in Photoshop.

Strong problem-solving skills.

Strong communication skills, both verbal and written.

Attention to detail and ability to manage multiple assignments concurrently.

Ability to work in a fast-paced environment.

Digital and/or Commercial Print production experience a plus.

Experience with RIP software, specifically Onyx and Wasatch a plus.

Familiarity with construction drawings.

Working conditions

Office environment with a typical workday from 7:00 am to 3:30 pm Monday – Friday (hours include 1/2 hour lunch break). Occasional after-hours and weekend work may be required.

Physical requirements

Office environment, no physically strenuous activities will be performed.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Number: 19-45150
Job Location: Phoenix, AZ
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-31 00:00:00.0
Input Date: 10/31/2019
Last Updated: 12/10/2019

Firm Name: NESCO RESOURCE
Attention: David Darnell
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Drafter / Drawings / AUTOCAD - Clearance URGENT NC

Description:
166223 Job Title: Drafter/Drawings

Work Site Address: Fort Bragg, NC 28303
Job Number: 2016-1
Max Pay Rate: 50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020

Qualification
Drafter with the following to be considered:
* Must have building floor plan design experience
*As-built experience

Additional Note
**HM is seeking more qualified resumes for AUTOCAD

Job Summary:
Essential tasks include using AUTOCAD along with production plotters to design building floor plans, utility layouts, maps, master plans and complete engineering projects.

Maintains the FM library of drawings and updates drawing after projects by incorporating As-builts and record drawings along with site information. In cases where As-builts are inadequate, incumbent will draft the necessary information in AUTOCAD for incorporation.

Routinely takes complex input to develop end item drawings to include underground utilities (water, sewer, power and communications), building plans including architectural, structural, fire safety, and security drawings and Scopes of Work (SOW). Incumbent has to independently conduct research to resolve complex issues and problems as a result of errant contractor/user provided layouts, drawings, design specifications and input to ensure design projects are complete and accurate.
Utilizes Microsoft Office software and printers to prepare and maintain construction status reports, various spreadsheets, briefing charts, and general correspondence. Operates, maintains and updates the computerized command building and utility as-built programs to show existing and future construction. Prepares As-Built drawings and plans from engineering technical data and quotes, updates floor plans for specific buildings, special projects and provides drafting support for MILCON, UMC, and O&M construction projects.

Responsible for all Command construction and as-built plans and documentation archival storage, maintenance and reproduction.
Has basic knowledge of schedule software to track and maintain furniture, construction and space allocation schedules for the Command. Prepares status reports and updates of the schedules when needed to brief leadership.
Completes and maintains the ISR-I compliance status for the compound. Communicates with DPW/Real Property and modifications for new facilities.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
Operating Microsoft and AUTOCAD at a journeyman level with basic knowledge of ARC-GIS computer aided drafting and design software.

Qty 1 position needed
This is an urgent requirement. The vacancy requires immediate fulfillment.

Job Number: JE-2016-1S
Job Location: Fort Bragg, NC
Rate: 50/hr max
Per Diem: pd split possible
Duration: 6 months
Input Date: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drive Systems Design Engineer

Description:
Drive Systems Design Engineer

Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration. This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements.

Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.
Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements:

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 57715
Job Location: Fort Worth, TX
Rate: negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 10/30/2019

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky phone
469-785-4744
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Dyno Test Engineer

Description:
PDS TECH INC is currently looking for a Dyno Test Engineer for our client in Santa Clarita.

Responsibilities include: engine development and durability testing on the test cell while ensuring that the test cell is ready and capable of meeting the requested testing goals and deadlines.
Will be programming and operating the test cell/plans, develop engine and instrumentation calibration setting and cell maintenance.
Review testing methods to determine areas for improvement in accuracy, consistency and processing results.

Requirements include
BS degree or equivalent work experience in Mechanical Engineering, with relevant automotive focus in studies and activities preferred.

1 to 3 years’ experience with Formula SAE or similar automotive or motorsports related projects a plus;

Must have strong data analysis, problem-solving and report writing skills.

Ability to utilize on-car data analysis software (logged data, telemetry, etc.); program software (MATLAB/Simulink, C+, Visual Basic, etc.) and analyze with simulation tools such as FEA, etc.

Some mechanical skills required.

Must have the ability to work in team environment with minimal supervision, be self-directed, detailed oriented who can effectively work well under pressure in a diverse environment.

If you are interested, please call DJ 714-384-0004 and send resume to: denglert@pdstech.com

Job Number: 1910108701
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 12/13/2019

ERP Analyst

Description:
PDS Tech, Inc. is seeking a ERP Analyst in Hazelwood, MO.

Job Purpose

Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process. Lead work in flow management by coordinating all day to day activities and communicating what needs to be done to operations and ensure all material is available prior to shop floor expected execution.

Principal Accountabilities

Develop and implement strategy to communicate daily work schedule created by the Schedule/Planner to operations. Ensure the appropriate schedule information to ensure the schedule is achievable.
Execution of the manufacturing work orders, tracking and reporting to ensure compliance to the daily schedules. Identify issues that prevent the successful execution of the daily schedules.
Provides the shop floor with work cell schedules based on the master production schedule.
Conduct Pre-Ops Readiness Reviews to ensure availability of required tooling, materials, planning, work instructions, and capacity to execute the daily schedules.
Expedite flow of materials, parts, and assemblies within or between departments in accordance with production schedules.
Maintains manufacturing LOB status, commitments and schedules.
Performs ERP and related business system transactions as required to support operations, supply chain and inventory management and business system compliance.
Releases, prints and delivers work orders to the start of the manufacturing process.
Performs cycle counts and make adjustments as necessary to inventory to ensure appropriate inventory reporting.
Manages WIP to ensure it continues to move through the production flow and raises issues that prevent the adequate flow of material to meet the production schedule.
Perform all duties in compliance with company policies and procedures.

Please email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss

Education

BS/BA in Supply Chain/Business Administration or other relevant discipline preferred, and/or a combination of education and relevant experience in lieu of a degree. Recognized material management certification such as APICS preferred.

Required Qualifications & Experience

Requires 3 years of experience in Supply Chain Management or Manufacturing/Enterprise Resource Planning.
Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook.
Proven/demonstrated knowledge of Lean Manufacturing principles and working with Standard Work Instructions.

Additional Desired Qualifications & Experience

Previous experience working in a manufacturing environment and scheduling organization preferred.
Previous experience and working knowledge of ERP, MRP and other manufacturing systems preferred.
Ability to communicate clearly and professionally both orally and in writing.
Understanding and working knowledge of a manufacturing environment.
Excellent interpersonal skills.
High level of accuracy in reporting.
Self motivated with an ability to multitask with many diverse assignments.
Self directed to perform work with minimal supervisory oversight.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries. These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review. Please connect with us now for immediate consideration. Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

Job Number: 1910105596
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 3 months
Input Date: 08/13/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX87QAG&URLSource=cjhunter

Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree

Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/11/2019

Electrical Design Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Design Engineer II in Indianapolis, IN.

The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:

Digital and mixed signal design,
Configurable logic (FPGA/firmware) design,
RF Design and
Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:

Active Secret DoD Security Clearance or the ability to obtain and retain one.
US Citizenship
Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
A self-motivated and effective communicator
Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:

Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
Experience with intellectual property generation (patents & publications)
Team and project leadership skills
Knowledge of software and/or FPGA code development
Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree

Job Number: 1910107926
Job Location: INpolis, IN
Duration: 12 months
Input Date: 10/17/2019
Last Updated: 12/13/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Ronkonkoma, NY )

Description:
Electrical Engineer ( Ronkonkoma, NY ) 9613193
12 Month Contract

Pay Rate: $50-60/hr

*Job Duties:
- Candidate will be responsible for supporting test program activities in the Aerospace Propulsion Laboratory.
- Under the direction of senior engineering, the individual will be responsible performing a variety of basic engineering tasks associated with the analysis, design, or testing of electronic and data acquisition systems as well as developing, creating and modifying computer applications software.
- Effectively communicate and portray design approach and functionality to other team members and lab users.
- Apply theoretical knowledge and engineering technical principles under the guidance of senior engineers to solve basic electrical engineering problems.
- Create block diagrams, wiring diagrams, interconnect diagrams, and detailed assemblies.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs.
- Development, integration, and documentation of laboratory systems, electrical cable designs and electrical assemblies for test facility.
- Design, integrate, and troubleshoot electrical designs of a functional system including commercial off the shelf (COTS) electro-mechanical components such as connectors, relays, switches, circuit breakers, etc.
- Test procedure, script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Establish requirements and procedures to evaluate purchased equipment or EEE parts. Under supervision, supports the testing and/or evaluation/ validation of one or more elements of an electrical.
- Assist with the development of review material, reports, documenting and presenting findings.

*Education Requirements:
- BS in Electrical Engineering & 2 years, OR Master’s Degree in Electrical Engineering.//

Job Number: 9613193
Job Location: Ronkonkoma, NY
Rate: 50-60
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 10/31/2019

Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC

Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.

Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/29/2019
Last Updated: 12/09/2019

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc

Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/15/2019
Last Updated: 11/15/2019

Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.

About the Job:

§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.

§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.

§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.

§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.

§ Work with product development team to integrate digital elements with other parts of the product design.

What you Need:

§ BSEE/BSET or equivalent is required.

§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.

§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.

§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.

§ Familiar with PCB Layout practices for high-speed digital circuits.

§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)

§ Experience with Bluetooth / WiFi radios and circuitry is a plus.

§ Experience working with ARM processor platforms.

§ Experience with memory interface circuits such as DDR.

§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.

§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.

§ Good technical and non-technical communications skills.

§ Project planning skills.

Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 12/15/2019

Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:

PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:

Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
Maintain documentation of testing and equipment operation.

BASIC QUALIFICATIONS:

Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
Knowledge of analog and digital symbol identification
Knowledge of test practices and procedures.
Personal computer skills required to configure and load software
Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

EDUCATION AND EXPERIENCE:

Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.
2 years related experience and/or training; or equivalent combination of education and experience.

QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:

Valid State Driver’s License
Must be DoD Clearance Eligible

PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions

Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 12/13/2019

Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
*Leads work with customers to develop and document complex electronic and electrical system requirements

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

Email resume to: mmccarthy@pdstech.com

Job Number: Bo-OK-Elec/Systems
Job Location: Oklahoma City, OK
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019

Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.

Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 12/10/2019

Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

Electrical Systems Design Engineer 4 - Power Systems

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

•Leads work with customers to develop and document complex electronic and electrical system requirements.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374235
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 12/14/2019

Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 5

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include
• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Works with other to develop program test strategies.
• Manages performance of critical suppliers to ensure system integration and compliance with requirements.
• Conducts program independent reviews and reports results to program leadership.
• Provides critical support of fielded hardware and software over the entire product lifecycle.
• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Works under consultative mentorship.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Job Number: 374254
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 12/14/2019

Electrical and Controls Engineer

Description:

PDS Tech, Inc. is seeking an Electrical and Controls Engineer, Muscatine, IA.

Summary:

Support the day-to-day electrical and instrumentation needs in a chemical manufacturing unit. This support may involve troubleshooting and some maintenance.
Together with process and mechanical engineers, develop scopes defining improvement projects (safety, yields, capacity, quality, reliability and cost improvement), including. alternatives and cost-benefit analysis, as needed.
Specify instruments (flow, pressure, temperature, etc.), control devices, motors, and other electrical components.
Review and evaluate vendor information for instrumentation and electrical components and determine suitability for specific projects applications.
Prepare maintenance plans for restoring and maintaining equipment to operating condition in a minimum amount of time, balancing repair cost and minimizing future failures.
Interacts with E&I maintenance technicians, production technicians, maintenance go-to, and others who work in and support the unit.
Create, modify and validate documentation related to process operations, safety, and applicable environmental regulations, as needed – including electrical drawings and engineering flow diagrams/P&ID diagrams.
Comply with plant safety rules.
Working knowledge of Engineering tools and software and ability to read and understand process flow diagrams, line drawings P&ID and schematics.

Basic Qualifications:

Requires a bachelor's degree in engineering and 2-5 years of experience in the field or in a related area.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on limited experience and judgment to plan and accomplish goals.
Performs a variety of tasks.
Works under general supervision; typically reports to a supervisor or manager.
A certain degree of creativity and latitude is required.

Job Number: 1910107243
Job Location:

Job Search Results

Listings 1 - 998

Job Purpose

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. Job Summary

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss.

Job Purpose

Principal Accountabilities

Education

Required Qualifications & Experience

Additional Desired Qualifications & Experience

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO.

Job Summary