Job Search Results

998 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/01/20 Wednesday 11:15AM Pacific Time by ContractJobHunter. )

Listings 1 - 998

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)

Description:
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)
Clifton, New Jersey 07014

Duration 12 months

Electronic Systems

NOTES:

1. Total of 10 positions needed
2. MUST HAVE ACTIVE CLEARANCES - no interim clearances accepted

Job Description:

Perform technical planning, system integration, verification and validation activities in support of programs and development efforts.
• Ensure the logical and systemic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Perform functional analysis, timeline analysis, detail trade studies, requirements, and allocation and interface definition studies to translate customer requirements into hardware and software specifications.
• Perform Cost, Risk, and Supportability and Effectiveness analyses for total systems (concept, design, fabrication, test, installation, operation, maintenance & disposal)
• Work in a highly dynamic hardware & software development and integration lab
• Support/lead technical proposals, including decomposition of customer requirements into a system architecture/design, technical writing, technical risk management, cost estimating, etc.

Contact Phone Number: 813-510-3032
Email: christion@bentleygr.com
 
Job Number: 1741
Job Location: Clifton NJ
Rate: 60-65
Per Diem: Yes
Overtime: Possible
Duration: 12 MONTHS +
Start Date: 2 weeks from offer date
Input Date: 11/14/2020
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Christion
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/510-3032
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Support - no clearance NY

Description:
166667
Job Title: Administrative Support

Work Site Address: Syracuse, NY 13221
Job Number: 2494-1
Max Pay Rate: $19.60/hr Max Bill Rate:
$26.46/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board.
Utilize hi-speed print production printers, wide-format production printers, folders, punches and cutters to produce high-quality materials for distribution.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Responds to telephone and email inquiries concerning the status of customer's work order and general duplication questions; notifies customers when orders are completed; resolves questions or issues related to production.
Collates, folds, staples, binds, cuts, drills, mounts, and packages printed materials according to job specifications. Interface with customers to determine requirements and priorities.
Performs basic maintenance of all production equipment including preventive maintenance and general cleaning; contacts service representative for machine problems requiring major repairs. Performs data entry function to create job tickets for tracking and billing purposes. Maintains inventory of paper and other supplies. Keeps work areas orderly, clean, and safe; ensures proper care in the use of equipment and supplies. Performs miscellaneous job-related duties as assigned. Able to lift boxes of paper and perform repetitive print production tasks.
Xerox high-speed and wide format printer operation, finishing operations including folding, cutting, binding, etc. Set up jobs in PDF using Fiery software (OTJ training).

Qualifications and Education Requirements
Basic Qualifications
> - Previous experience in a high-volume, fast-paced print shop
> - Experience with high speed and wide-format print operations
> - Able to work overtime, extended shifts, weekends
> - Ability to multitask and shift priorities based on business needs
> - Outstanding interpersonal skills, team player, customer-oriented
> - Self-starter, comfortable working alone or with a team
> - Outstanding organizations skills
> - Able to listen to, understand and follow written or oral
> instructions
> - Ability to lift up to 50lbs
> - Valid Driver’s License
Desired skills
> - Experience in a digital print production environment
> - Experience scanning hard copies to data files
> - Experience with Adobe Pro
> - Experience editing and adjusting PDF files
> - Experience with Microsoft Office Suite
> - Experience running Xerox production print equipment
> - Experience using FIERY software including Impose/Compose and
> Jobmaster


Skills: Category Name Required Importance Experience
Software Skills Adobe Acrobat Yes 1 1 - 2 Years
Software Skills MS Office Yes 1 1 - 2 Years
Technical Skills Ability to Edit, Process, and Implement Work Orders No 1


Qty 1 position
 
Job Number: LMRMS-2494-1
Job Location: Syracuse, NY
Rate: 19.60/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Support - no clearance NY

Description:
166643
Job Title: Administrative Support

Work Site Address: Owego, NY 13827
Job Number: 2375-1
Max Pay Rate: $21.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Performs variety of activities in support of human resources for a specific project.

Gathers, collects, records, tracks and verifies data and information from multiple sources. Compiles, reviews and analyzes data. Uses software for functional area, to compile and generate individual records. May assist with processes to enhance work flow. Provides data and information to others on functional unit processes and procedures. Performs routine, repetitive, and basic tasks where precedent, methods and processes are well established. Makes simple decisions, but refers most to more experienced personnel.

Qualifications and Education Requirements
No BS required
High School diploma, or equivalent experience/combined education and less than 1 Year of experience.
Must have the required skills.
Moderate understanding of general job aspects and superficial understanding of the technical phases of the job.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Microsoft Suite Yes 1 1 - 2 Years
Software Skills Nuance Power PDF Yes 1 1 - 2 Years
Technical Skills Basic Computer Skills Yes 1 1 - 2 Years

Qty 2 positions
This is a non-exempt level 1 position. Apprentice or Trainee.
Manager is looking for particular skills set. However it is a very basic position.
 
Job Number: LMRMS-2375-1
Job Location: Owego, NY
Rate: 21/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership.
2. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.
3. Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments.
4. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team.
5. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
6. Strong verbal and written communication skills are highly desirable.
7. Occasional overtime and odd hours required.
8. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
9. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
10. Must be able to obtain a Secret security clearance and be able to obtain special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation.
3. Experience in design and fabrication of high voltage, high current, high energy, and high power systems.
4. Experience with laboratory power equipment such as oscilloscope.
5. Experience leading teams.
6. Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets.
7. Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion.
8. Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays.
9. Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, Hall Effect transducers, and grounding rods.
 
Job Number: 11740
Job Location: Palmdale, CA
Rate: $90.00 - $102.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
2. Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments.
4. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including work with Class III and Class IV lasers.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Education/Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
3. Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
4. Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
5. Experience in plasma modeling and simulation.
6. Experience with thermal and structural analysis from first principles.
7. Experience with solid state physics.
8. Coursework in plasma chemistry/non-equilibrium effects.
9. Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
10. Proficient with CAD software such as CATIA V5.
 
Job Number: 11709
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team's performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
 
Job Number: 11710
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.
 
Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166556
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2224-1
Max Pay Rate: $83.00/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support for optical, thermal, and plasma experiments.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Expected to support team’s performance on projects related to the analysis, design, and testing of optical systems, thermal and plasma physics experiments. The position more generally requires working in a small, fast moving team on concept level analysis, implementation of diagnostics and data acquisition systems, and detailed design and construction of laboratory experiments. Requires use of MATLAB and MS Office software tools to compile data, reduce data, and generate reports

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
-- Must have education or experience in designing, developing, testing, or analysis of laboratory experiments.
-- Hands-on laboratory experience, especially in the areas of plasma physics, vacuum hardware, spectroscopy, thermal/heater testing, and photovoltaics.
-- Experience in optical system design and testing, including diagnostics (spectroscopy, laser-based techniques).
-- Experience in plasma modeling and simulation.
-- Experience with thermal and structural analysis from first principles.
-- Experience with solid state physics.
-- Coursework in plasma chemistry/non-equilibrium effects.
-- Proficient with analysis tools such as MATLAB, LabVIEW, Zemax, COMSOL, and ANSYS Mechanical.
-- Proficient with CAD software such as CATIA V5.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including work with Class IIIb and Class IV lasers.



Qty 1 position
 
Job Number: JE-2224-1S
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview / strong background in experimental plasma physics CA

Description:
166532
Job Title: Aeronautical Engineer
Work Site Address: Palmdale, CA 93599
Job Number: 2222-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

Roles and Responsibilities
The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
Requires use of MS Office software tools to compile data, reduce data, and generate reports.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
--Proficient with MS Office tools


Qty 1 position
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
None to start. Must be able to obtain a Secret security clearance.
 
Job Number: JE-2222-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena CA

Description:
166557
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2225-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments. Requires use of MS Office software tools to compile data, reduce data, and generate reports. Strong verbal and written communication skills are highly desirable.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
--Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
Occasional overtime and odd hours required. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.

Qty 1 position
 
Job Number: JE-2225-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments CA

Description:
166650 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2228-1
Max Pay Rate: $102.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.

Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team. Requires use of MS Office software tools to compile data, reduce data, and generate reports.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation
--Experience in design and fabrication of high voltage, high current, high energy, and high power systems
--Experience with laboratory power equipment such as oscillo
--Experience leading teams
--Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets
--Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion
--Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays
--Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, hall effect transducers, and grounding rods

Qty 1 position
 
Job Number: JE-2228-1ATO
Job Location: Palmdale, CA
Rate: 102/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Engineer

Description:
SG is hiring an Airframe Structural Engineer for a 15+ months contract opportunity in Huntsville, AL!

Description:

The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.
Specific functions include: Static structural analysis and Margin of Safety determination, fatigue and fracture mechanics analysis of critical interfaces, determination of airframe component replacement and / or retirement times, specification and design of airframe related static and fatigue tests, field support and formal engineering documentation.


Education requirement:

B.S.in
M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience Required:

Minimum of 12 years experience in the functions described above.
Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
Excellent oral and written communication skills are required.
Software Experience: NASTRAN/PATRAN or equivalent FEM, Catia, MS Office applications.
Secret Clearance preferred but not required.
US Citizenship Required.
 
Job Number: 375757
Job Location: Huntsville, AL.
Per Diem: Possibly
Overtime: Possibly
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Application Development - Cleared Contractor

Description:
Job Description:
Responsible for research, design, and development of computer software systems in conjunction with hardware product development.
Primarily responsible for the design and development of software products for a variety of software applications.
Participates in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and test of software products.
Applies computer science, engineering, and mathematical analysis concepts and principles in the development of the target application.
Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.
Develops software test procedures, software programs, and related documentation. Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure product meets project cost, schedule, and technical constraints.
Recognized as an internal expert and thought leader in area of expertise with broad experience across multiple job areas.
Works under consultative direction against annual goals to manage large, complex project initiatives of strategic importance to the organization.
Communicates within and outside of the organization to influence leadership to accept new practices, approaches, and concepts.
Develops or champions new systems, concepts, or technologies.
Recommends tactics and strategies that directly impact the achievement of overall business or functional results.


QUALIFICATIONS
 A Bachelor's degree in Computer Science, Electrical Engineering, or related engineering field
9+ Years of Embedded Software Engineering experience
9+ Years experience with Ada
 9+ Years Real Time Operating Systems Experience
Must have Real Time Operating Systems Experience
Experience with Ada

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Location: Clifton, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

Description:
166533 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2183-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
Experience with the verification and sell off of a subsystem to a customer through formal test events.
Experience developing subsystem design/engineering documentation.
Experience with Agile Software Development and/or SCRUM processes.
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation
Strong Interpersonal & Collaboration Skills
Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.


Qty 1 position
 
Job Number: JE-2183-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*


We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.


All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared


Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Experience in Configuration Management (CM)

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Rate: $80.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD - Engineer

Description:
Provide Engineering support for Core Stage 1/Stage 2 Creo and Creo Tools to include the following:
• Pro/Design Assembly, Detail, Cabling, Diagram & Manufacturing and surface modeling.
• Support in Windchill 9.0, Intralink, and PDM document management tools to meet stringent configuration management requirements per NASA and Aerospace standards.
• Support plans, schedules, conducts/coordinates detailed phases of the engineering or scientific work in a project, or perform work that involves conventional engineering or scientific practices. Typical work may include research, development, design, testing, logistics, analysis, production, maintenance, operation, planning, estimating, application, or standardization of engineering facilities, systems, structures, software applications, firmware, processes equipment, devices, or materials.
• Tools shall include Creo 4.0/5.0: machine, model design, Checker & updates with Top/Down large assembly experience, especially with simplified rep. family tables, skeleton/shrink wrap which allows for the efficient opening of large Creo models (with several thousand parts or more).
• Technical Check of design products

Candidate must be a U.S. Citizen.
This is a 2 month assignment with possible extensions
 
Job Number: 19-254
Job Location: Huntsville, AL
Rate: 62-92 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.



Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools



Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Laser Operator - SECOND SHIFT

Description:
Under the supervision of the Shop Manager, this position operates and maintains cutting laser for steel fabrication. This position may also perform other production activities, including but not limited to supporting the production team by assembling parts, operating machinery, and fabrication, as well as cleaning and maintaining equipment and the shop floor. This position may also be required to perform the functions of the Machine Shop helper as needed.



ESSENTIAL FUNCTIONS

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.



  • Operate CNC laser cutting machine and other machinery used in the production process, or assist other machine operators

  • Select and setup lenses based on material type/thickness, load programs, set machine parameters and proper fixtures to ensure optimal performance of the equipment

  • Establish proper stop location, adjust laser beam focal point

  • Create and edit laser cut files from drawings in various formats; prepare, layout, and array parts from the cut files in the laser software for optimal cutting speeds/yield

  • Manage and maintain files to ensure matching revision levels at all times

  • Provide great level of attention to detail and focus on the given task

  • Perform prescribed preventative maintenance on machines/equipment as needed

  • Perform all dimensional inspections

  • Detect and report defective materials or questionable concerns

  • Perform typical machine shop operations to support production and fabrication

  • MUST BE FAMILIAR WITH BASIC MACHINE FUNCTIONS TO PERFORM TASKS : 1 YEAR OF EXPERIENCE IS REQUIRED AND LISTED ON RESUME

  • Must be willing to accept and receive supervision and assistance with re to machine setup

  • Must be able to operate with minimal supervision once trained by following work instructions and standard operating procedures

  • Wear proper safety equipment and comply with company safety rules at all times

  • Make a positive contribution to maintaining a workplace that is healthy, safe, neat, tidy







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-42953
Job Location: Ridgeway, SC
Rate: 15.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-16 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Andrea Moss
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Must be able to meet US Defense requirements.

Esprit, Applicon, programming and Solid Edge CAD highly desirable, MasterCam, Language based or Graphics based CAM programming is helpful.
Programming 4 and 5 axis Mill/Turn equipment is a plus.
Renishaw probe software experience is a plus.
Macro-B programming is a plus.
Varied CNC operating experience desirable.
Must have worked in CNC programming demonstrating a high degree of proficiency
General math, geometry, and trigonometry experience required.
 
Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Must be able to meet US Defense requirements.

Esprit, Applicon, programming and Solid Edge CAD highly desirable, MasterCam, Language based or Graphics based CAM programming is helpful.
Programming 4 and 5 axis Mill/Turn equipment is a plus.
Renishaw probe software experience is a plus.
Macro-B programming is a plus.
Varied CNC operating experience desirable.
Must have worked in CNC programming demonstrating a high degree of proficiency
General math, geometry, and trigonometry experience required.
 
Job Location: MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer Lead, Environmental/Sewer

Description:
*This is a full time salaried position, located in Mount Holly, NJ.*

*Full benefit package including bonus*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing and modelling sewer and storm water management/distribution, wastewater treatment, runoff and similar town/city infrastructure.



Work will include water and wastewater design experience including distribution, collection, pumping stations, public water supply wells, and treatment facilities. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:

*5 years’ experience in Environmental/sewer design engineer, stormwater runoff/drainage design or similar design and engineering projects.

*Experience working as a lead.

*Must reside within 1hr of Mount Holly, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT



Pluses:

*PE
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience


Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 050
Job Location: MT Holly, NJ
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database Admin II

Description:
We have an outstanding Contract to Hire position for a Database Administrator to join a leading Company located in the O'Fallon, IL surrounding area.

** Candidate must be able to obtain and maintain a Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
Serves as a Development Lead for multifaceted reengineering of systems to support business operations.
Designs develop and manage the implementation of cloud-based and SOA based Integrated Booking System framework, methodology, and tools to ensure business continuity of operations across a large, multi-division, decentralized organization.
Supports multi-language, multi-platform, and multi-operating system operations and utilizes electronic commerce and Electronic Data Interchange (EDI) applications.
Recognizes and recommends new or emerging technology or software to satisfy functional requirements and processes.
Provides highly technical and/or specialized guidance concerning automation solutions to complex information processing problems related to the subject field.
Provides customer support using enterprise solutions software to integrate business areas, consistent with today’s technology in order to operate in an open systems environment and client service architectures.
Performs high-level, day-to-day operational maintenance, support, and upgrades for complex database management systems workstations and servers on multiple operating systems. Implements and maintains smooth operation and physical design of databases.
Coordinates direct and performs complex database software installations and upgrades to operating systems and related database software packages.
Schedules installations and upgrades and maintains them in accordance with established IT policies and procedures.
Continually monitors and tunes multiple database systems and databases to achieve optimum performance levels.
Ensures database data integrity by evaluating, implementing, and managing appropriate solutions of varying complexities.
Ensures database recoverability by developing and implementing a schedule of database backups and archive operations.
Plans and implements the modernization of database implementations.
Develops, implements, and promotes standard operating procedures and schedules.
Conducts audits of databases to ensure compliance with established standards, policies, and configuration guidelines.
Develops and implements new standards, policies, and procedures.

Basic Hiring Criteria:
Bachelor's and five (5) years or more experience; Masters and three (3) years or more experience; Ph.D. and 0 years related experience.
Complete understanding and wide application of technical principles, theories, and concepts in the field.
General knowledge of other related disciplines.
Receives assignments in the form of objectives and establishes goals to meet outlined objectives.
Work is reviewed by management to measure whether objectives have been met.
Provides technical solutions to a wide range of difficult problems where analysis of data requires evaluation of identifiable factors.
 
Job Number: 38518
Job Location: O'Fallon, IL
Rate: $51.17
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Amy Dawkins
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Oklahoma City, OK
2019-10166
Responsibilities:
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
• Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
• This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
• Other job responsibilities may include
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Work under consultative mentorship.

Qualification:
• This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
• Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
• Willingness to travel at least 25% of the time as required
• Highly motivated and must work well in a team environment.
• The ability to communicate effectively, both verbally and in writing
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10166
Job Location: Oklahoma City, OK
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-10125
Responsibilities:
• Lead work with customers to develop and document complex electronic and electrical system requirements.
• Lead and coordinate work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test and validate to ensure system designs meet operational and functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Understand and apply job practices, techniques, standards, principles, theories, and concepts.
• Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements.
• Develop statement-of-work and technical performance specifications.
• Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle.
• Test and validate to ensure system designs meet operational and functional requirements.
• Resolve product integration issues and production anomalies.
• Support fielded hardware and software over the entire product lifecycle.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.

Qualification:
• The ability to obtain a Secret Securiy Clearance is required at time of hire.
• Must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired.
• Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired.
• Ability to provide technical coordination with internal and external suppliers and customers is a plus.
• Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred.
• Knowledge of data system design, and architectures is desired.
• Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 9+ years of experience, or a Master's Degree with 7+ years of experience, or a PhD with 4+ years of experience.
• Bachelor's degree in electrical or computer engineering is highly desired
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10125
Job Location: Berkeley, MO
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design
 
Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Diagnostics Engineer

Description:
Diagnostics Engineer responsible for conducting detailed analyses and assessments of evolving and approved designs in support of the development of troubleshooting support documentation. This may include:

1. Interfacing with hardware and software design engineers to understand the functionality of equipment.

2. Conducting detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to fault isolate/troubleshoot and support the design.

3. Translating engineering & other technical information into troubleshooting source data (procedures and schematics) in support of Integrated Logistics Support (ILS) product development.

4. Performing on-vehicle fault insertion to verify that equipment and troubleshooting procedures function properly.
 
Job Number: 47487
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter & Prepress Technician

Description:
Job purpose



This is a newly created hybrid role that will play a big part in the future success of our organization. Overarching responsibilities include the creation of detailed panel and elevation drafting including high-resolution graphics along with the preparation of print files from standard and customer supplied art for digital print production.



Duties and responsibilities



Panel and Elevation Drafting

  • Analyze internal request details along with customer supplied details.

  • Work with Inside Sales department to rectify issues with customer-supplied information.

  • Prepare individual panel drawings and elevations in Adobe Illustrator.

  • Create low-resolution FPO images in Adobe Illustrator or Adobe Photoshop from standard or customer supplied art files for placement in individual panel drawings and elevations.

  • Ensure all drawings and elevations accurately display the products we intend to make.

  • Verify that all drawings and elevations show only what we can produce.




Preparing High-Resolution Graphics for Production and Archiving


  • Analyze customer supplied art files for correct format and resolution.

  • Work with Inside Sales and Manufacturing departments to ensure all aspects of the job are being considered for timely and correct completion.

  • Prepare full-size high-resolution graphics in Adobe Illustrator and Adobe Photoshop for production by sizing and scaling appropriately.

  • Monitor job output and ensure color match and consistency to house standards.

  • Document all pertinent settings used for job production to ensure repeatability.

  • Perform archive and file maintenance duties as needed.




Qualifications


  • Proficient in the latest versions of Adobe Illustrator and Adobe Photoshop, preferably on Mac.

  • Advanced skills and knowledge of Adobe Illustrator, 3 years' experience or greater.

  • Prior drafting experience.

  • Ability to work cross-platform Mac and PC.

  • Strong color correction skills in Photoshop.

  • Strong problem-solving skills.

  • Strong communication skills, both verbal and written.

  • Attention to detail and ability to manage multiple assignments concurrently.

  • Ability to work in a fast-paced environment.

  • Digital and/or Commercial Print production experience a plus.

  • Experience with RIP software, specifically Onyx and Wasatch a plus.

  • Familiarity with construction drawings.




Working conditions



Office environment with a typical workday from 7:00 am to 3:30 pm Monday – Friday (hours include 1/2 hour lunch break). Occasional after-hours and weekend work may be required.



Physical requirements



Office environment, no physically strenuous activities will be performed.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-45150
Job Location: Phoenix, AZ
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-31 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Darnell
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter / Drawings / AUTOCAD - Clearance URGENT NC

Description:
166223 Job Title: Drafter/Drawings

Work Site Address: Fort Bragg, NC 28303
Job Number: 2016-1
Max Pay Rate: 50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020

Qualification
Drafter with the following to be considered:
* Must have building floor plan design experience
*As-built experience

Additional Note
**HM is seeking more qualified resumes for AUTOCAD

Job Summary:
Essential tasks include using AUTOCAD along with production plotters to design building floor plans, utility layouts, maps, master plans and complete engineering projects.

Maintains the FM library of drawings and updates drawing after projects by incorporating As-builts and record drawings along with site information. In cases where As-builts are inadequate, incumbent will draft the necessary information in AUTOCAD for incorporation.

Routinely takes complex input to develop end item drawings to include underground utilities (water, sewer, power and communications), building plans including architectural, structural, fire safety, and security drawings and Scopes of Work (SOW). Incumbent has to independently conduct research to resolve complex issues and problems as a result of errant contractor/user provided layouts, drawings, design specifications and input to ensure design projects are complete and accurate.
Utilizes Microsoft Office software and printers to prepare and maintain construction status reports, various spreadsheets, briefing charts, and general correspondence. Operates, maintains and updates the computerized command building and utility as-built programs to show existing and future construction. Prepares As-Built drawings and plans from engineering technical data and quotes, updates floor plans for specific buildings, special projects and provides drafting support for MILCON, UMC, and O&M construction projects.

Responsible for all Command construction and as-built plans and documentation archival storage, maintenance and reproduction.
Has basic knowledge of schedule software to track and maintain furniture, construction and space allocation schedules for the Command. Prepares status reports and updates of the schedules when needed to brief leadership.
Completes and maintains the ISR-I compliance status for the compound. Communicates with DPW/Real Property and modifications for new facilities.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
Operating Microsoft and AUTOCAD at a journeyman level with basic knowledge of ARC-GIS computer aided drafting and design software.


Qty 1 position needed
This is an urgent requirement. The vacancy requires immediate fulfillment.
 
Job Number: JE-2016-1S
Job Location: Fort Bragg, NC
Rate: 50/hr max
Per Diem: pd split possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drive Systems Design Engineer

Description:
Drive Systems Design Engineer


Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration. This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements.


Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.
Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements:

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57715
Job Location: Fort Worth, TX
Rate: negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky phone
469-785-4744

Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree
 
Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Ronkonkoma, NY )

Description:
Electrical Engineer ( Ronkonkoma, NY ) 9613193
12 Month Contract

Pay Rate: $50-60/hr

*Job Duties:
- Candidate will be responsible for supporting test program activities in the Aerospace Propulsion Laboratory.
- Under the direction of senior engineering, the individual will be responsible performing a variety of basic engineering tasks associated with the analysis, design, or testing of electronic and data acquisition systems as well as developing, creating and modifying computer applications software.
- Effectively communicate and portray design approach and functionality to other team members and lab users.
- Apply theoretical knowledge and engineering technical principles under the guidance of senior engineers to solve basic electrical engineering problems.
- Create block diagrams, wiring diagrams, interconnect diagrams, and detailed assemblies.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs.
- Development, integration, and documentation of laboratory systems, electrical cable designs and electrical assemblies for test facility.
- Design, integrate, and troubleshoot electrical designs of a functional system including commercial off the shelf (COTS) electro-mechanical components such as connectors, relays, switches, circuit breakers, etc.
- Test procedure, script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Establish requirements and procedures to evaluate purchased equipment or EEE parts. Under supervision, supports the testing and/or evaluation/ validation of one or more elements of an electrical.
- Assist with the development of review material, reports, documenting and presenting findings.

*Education Requirements:
- BS in Electrical Engineering & 2 years, OR Master’s Degree in Electrical Engineering.//
 
Job Number: 9613193
Job Location: Ronkonkoma, NY
Rate: 50-60
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
*Leads work with customers to develop and document complex electronic and electrical system requirements

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK-Elec/Systems
Job Location: Oklahoma City, OK
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.
 
Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Harrisonville, MO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a particular client site.

Position Summary



 


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

 

Core Duties and Responsibilities


 


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 



Candidates must be open to shift, overtime, weekends and holidays.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



  •  



 
Job Number: 19-32817
Job Location: Harrisonville, MO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Stapleton, CO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Candidates must be open to working any shift, holidays, weekends and overtime. Specific schedule is to be determined; however, there is a possibility for 1st shift hours.

Position Summary


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

Core Duties and Responsibilities 




  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-27729
Job Location: Denver, CO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-24 00:00:00.0
Start Date: 2019-07-22 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engr.

Description:
BS Engineering Degree
Ability to obtain security clearance
•Understand and apply job practices, techniques, standards, principles, theories, and concepts
•Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements
•Develop statement-of-work and technical performance specifications
•Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle
•Test and validate to ensure system designs meet operational and functional requirements
•Resolve product integration issues and production anomalies
•Support fielded hardware and software over the entire product lifecycle

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Electronic Sys Design & Ana
Job Location: St. Louis, MO
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Testers (Digital, Analog and RF Assemblies)(Interim Clearance)

Description:
Candidates must be able to test and troubleshoot digital, analog and RF assemblies down to the component level.

They must:
• be proficient with the use of various test equipment like multimeters, oscilloscopes, spectrum analyzers and must be familiar with the use of schematic diagrams.
• have proven problem-solving skills.

Candidates should:
• have experience testing and troubleshooting either micro-circuit, circuit card & high-voltage power supply assemblies down to the component level.
• be capable of using a computer and operating menu driven software.
• be capable of documenting test data as defined by verbal or written instruction.
• have the ability to work independently and as part of a team, under guidance of engineers, as necessary.

Candidate must have at a minimum an Interim Security Clearance to start with the ability to obtain a Secret Clearance.

Education Requirements:
• High School Diploma or GED plus completion of a comprehensive course in Electronic Technology.
• Must have 2-5 yrs experience performing digital, analog and RF testing using automated and manual test equipment.
 
Job Number: 1910103265
Job Location: Clifton, NJ
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded SW Engineer HWIL W/Secret Clearance

Description:
*This is a full time, 1 year contract position located in Grande Prairie TX*



We are hiring for an Active Secret Cleared Software Engineer who has developed/maintained and integrated RTOS models that interface to avionics hardware which communicates to units under lab/test in a Hardware In The Loop (HWIL) environment.



Candidate will develop/maintain the real time (RT) simulation, interface, driver and data/display collection code. It is expected that the applicant will handle software development from requirements collection/analysis to integration and test in a prototype environment.



Required:
*4 years’ experience in Software development of Embedded C++ in a RTOS or Linux environment

*Distributed Interactive Simulation (DIS) IEEE standard

*Real Time simulation system/modelling experience; Unit under test experience

*Experience modifying and loading drivers in a CentOS 7.X operating system

*Experience developing basic diagnostic, test software, user API routines and writing real-time applications that map to and provide data to the interface hardware.



Pluses:
*Experience implementing and testing missile Operational Flight Software

*Experience with device driver and user interface code

*Ada development/HWIL/SIL environment.

*Concurrent Hardware experience
 
Job Number: 450
Job Location: Grande Prairie, TX
Rate: 95.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Location: Palm Bay, FL

Integration of complex designs in small teams to ensure proper system functionality in an avionics environment.
Job Responsibilities include the following:

Communicate with leadership on status, issues, milestones, and successes


Qualifications:
C/C++ embedded systems developer
Embedded software fundamentals and the ability to code, integrate, and troubleshoot complex designs
Ability to work well across multiple engineering disciplines
Linux Kernel/Device drivers
Understanding of graphics processing and video mixing


Preferred Qualifications:
Knowledgeable of safety-critical software development / DO-178 or similar industry standards
Experience on complex systems with a focus on mission computing, memory systems, and/or displays
Intel x86/ARM/FPGA/SoC
1394, 1553
Software/Hardware co-design
Experience with LynxOS
Xilinx Zynq
Network Topology
Communications Protocols
Continuous Integration
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58260
Job Location: Palm Bay, FL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
The candidate will need to have the ability to get a Department of Defense security clearance at the Secret level.

Software Engineer to develop embedded and application software. Selected candidate will integrate algorithms into C++ applications. Candidate is expected to be proficient in C/C++. It is desirable to have experience w/ both Windows Visual Studio & Linux based C/C++ development.
 
Job Number: 47542
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
RTOS experience C experience Assembly Experience Object Oriented Design knowledge Linux experience

Skills Preferred
C++ experience Experience writing Linux Kernel Modules MIPI experience Experience interfacing with FPGAs

Security Clearance Not Required to Start
 
Job Number: 47558
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer w/Secret clearance and Ada

Description:
*This is full time, 6 month contract, located in Nashua NH*

CSS Staffing is seeking an Ada Embedded Software Engineer with recent experience with later Ada versions (such as Ada 2012) and its features. Embedded real-time software development experience, object-oriented design, and Linux development environment.



Required:
*8 years software engineering experience using embedded RTOS software

*Ada (later version such as 2012), Linux development environment.
*OOD experience.
*Linux OS as a real-time operating system Structured software development environment, and algorithm development
*Active Secret Clearance; US Citizens only please
*4 year degree in Computers, engineering or mathematics.



Desired:
*Python and Git
 
Job Number: 728
Job Location: Nashua, NH
Rate: 86.20
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Engineer II- Job ID 38856

Description:
We have an Excellent Contract position for a Facilities Engineer to join a leading Company located in York, PA. When applying, please enter the job ID.

Plans, designs and coordinates facility renovations, layouts, equipment updates, and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations. Develops implementation schedules for maintenance and/or subcontractor activities relating to facilities modernization, coordinating those activities to minimize production/operation delays or lost time and ensures compliance to schedules and project objectives. Investigates need for new facilities and equipment; participates in a make or buy decision. Develops specifications for foundations, structural, electrical, mechanical and necessary utilities that support facilities project implementation. Ensures technical outcomes are consistent with established engineering principles and practices and that customer and company technical, system, performance, and quality requirements are met.

Job Responsibilities:
Creates, plans and performs engineering design, development and/or analysis tasks of moderate complexity for a project or may lead these activities for a small project. Ensures tasks meet cost, quality, schedule and performance requirements.
Applies engineering design and/or analytical theory, principles, techniques, and practices to a portion of a technical project.
Manages assigned facility projects in the area of training, including meeting with customers to define project scope, determining conceptual design approach, developing and monitoring project budgets and schedules, handling communication during construction, monitoring construction quality, negotiating changes, creating a punch-list and certifying completion for final payment.
Applies knowledge of facility design to solve moderately complex and clearly defined engineering problems. Selects the best methods or processes from among several existing alternatives.
Develops and writes technical documentation, makes revisions to existing documentation and provides input to technical papers or presentations. May deliver technical presentations.
Performs technical analysis, testing, calculations and evaluation of results to solve moderately complex engineering problems using specialized equipment and/or by computer programs.
Provides input to project leaders for the development of project plans, schedules, and budgets.
Develops and maintains effective relationships with customers to solve technical problems of moderate complexity.
Analyzes and interprets design specifications, drawings, documentation, models and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
Analyzes and recommend methods for improving efficiency and reducing the environmental impact of plant operations.
Provides input on equipment reliability and robust design.
Maintains up-to-date knowledge of relevant engineering discipline(s), industry practices, trends, and applications.
May direct the work of less senior technical personnel.
Maintains a safe work environment and ensures compliance with safety policies and rules.
Shares responsibility for self-development with immediate supervisor.
Job Qualifications:
B.S. degree in a relevant technical discipline or an equivalent combination of education and experience, plus 2 years of relevant experience.
Working knowledge of fundamental concepts, practices, and procedures of a relevant technical field of specialization.
Familiarity with current computer applications including Word processing, spreadsheet, desktop publishing, and CAD/CAFM software including MS Office Suite (MS Project, PowerPoint, Excel & Visio).
High mental/visual application required to analyze facilities problems and recommend solutions.
Preferred education/experience:
Certain positions may require a specific technical degree or prefer an M.S. degree. Prefer engineering experience with relevant applications in an industrial environment.
 
Job Number: 38856
Job Location: York, PA
Rate: $30.00 to $37.69
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
Job Description: This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Location: Edwards AFB, CA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Flight Controls Engineer
(U.S. Citizenship Required*)
Edwards AFB, CA
2019-10185
Responsibilities:
• Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF).
• Expected to provide ground ops support at the F-22 & F35 CTF as needed.
• Team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.
• Serve as the principal focal point between aircraft maintenance and flight operations engineering personnel.
• Coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness.
• Provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives.
• Coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting.
• Coordinate as required with other organizations associated with test readiness.
• Act as the principal focal point between maintenance, engineering and flight crew.
• Relay maintenance related aircraft constraints to the aircraft FTE's.
• Consult with management on changes or problems.
• Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts.
• Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualification:
• Must have an active/current Secret Clearance.
• Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
• Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
• Experience in USAF maintenance activities and procedures, and T-2 modification processes.
• (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
• Exceptional planning and coordinating skills are required.
• Ability to interface with all levels of project management is desired.
• Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill.
• Above average oral and written communication skills are desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 4+ years of experience, or a Master’s Degree with 2+ years of experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10185
Job Location: Edwards AFB, CA
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Simulator Technician

Description:
Flight Simulator Technician to collaborate with a diverse team of technicians, engineers, and training instructors to ensure operational and reliability goals are met on a wide variety of flight simulator equipment used for training by global airlines.

Qualified Experience / Skills / Training:
• 2 years of electronics, computer science, PC repair, or network education preferred.
• Experience repairing electronic systems, aircraft avionics, computers, software programming, and/or networks preferred.
 
Job Number: 1241204
Job Location: Miami, FL
Rate: 18.00
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Develops and documents standardized test methods and processes to ensure repeatability and productivity. Leads the development of test procedures. Applies lessons learned to the improvement of test procedures. Designs calibration system/test fixtures. Develops data processing tools and algorithms. Generates calibration procedures and software. Guides others in the design of test hardware, software and systems to achieve test requirements. Oversees debriefing of the test team. Leads the analysis, processing and formatting of data to customer requirements. Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data. Performs functions as required to ensure calibration system readiness and data validity. Trains others. Works under minimal direction.
 
Job Number: T&E_WA
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Hardware Development Engineer (JPSS program)

Description:
The candidate will: •Perform Hardware/Electrical Engineering design, analysis and testing of electronics and RF subsystems.
•Represent Hardware Engineering in development and evaluation of system architectures, designs, and interfaces that meet system specifications.
•Prepare and present hardware specifications and design analysis in program reviews.
•Participate in Trade Studies and Vendor/Product selection.
•Participate in engineering discipline process development and deployment on programs.
•Insure organizational processes are followed and create program specific work instructions when necessary.
•Support may also include working with other organizations, coordinating common and efficient cross-factory environments (both hardware and software), tools, process, and methods.

Key responsibilities for the qualified candidate include: •Responsible for assisting in trouble shooting the Space to Ground Interface, including RF equipment and antennas
•Responsible for working with team members to resolve operational issues in an urgent manner
•Responsible to create design documentation, perform reviews with team members and vendors, and follow program and corporate process
•Responsible to work with the team to create System Operating Procedures

Required Skills:
•BS degree in Electrical Engineering specializing in RF and Communications fields
•Experience with RF/Baseband and signal processing design, development, and hardware testing
•Experience with preparing statements that convey the fundamental characteristics of the design objective, creating and presenting reports
•Experience with writing and reviewing manuals, procedures, plans, specifications, engineering drawings and notebooks
•General knowledge of communication protocols, digital signal processing, RF signal types and levels
•General knowledge of common information system (computer) hardware interfaces
•Must be proficient with Microsoft Office applications such as Word, Excel, and Power Point
•Must be familiar with Satellite Ground Station facilities and operations
•Periodic travel required to support upgrades at Ground Stations in CONUS and OCONUS
•U.S. Citizenship status is required. No clearance needed but needs to have ability to obtain a Common Access Card (CAC) to access government systems.

Desired Skills
•Experience with VHDL, FPGA design and coding, firmware and embedded software
•Experience with analyzing system parameters to ensure requirements are met using analytical tools
•Experience with MATLAB
•Experience with performing trade studies, recommending solutions and identifying potential vendors
•Experience with developing bill of material required to produce product and initiate the purchasing process and monitor progress
•Experience with collecting and reporting time and material estimates based on requirements.

Required Education
•Requires a degree in Science Technology Engineering or Math (STEM) with emphasis in RF design and a minimum of 4+ years of experience or 12 years experience in lieu of a degree
 
Job Number: 1910106380
Job Location: Aurora, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Hardware Engineer

Location: Driftwood, TX

12+ month contract



The primary responsibility of this engineer is the design and development of high-performance RF and microwave products. As a HW Engineer, you will be an integral part of a project team responsible for designing and developing a product from concept to release.

In addition to solid hardware engineering practices, you will be expected to be familiar with a wide variety of sophisticated test equipment, define and execute comprehensive test plans to debug and validate the performance of complicated circuits and modules, as well as develop and implement sophisticated calibration algorithms.

You will also be directly involved in setting specifications and transitioning the product from engineering to production. In this role, you will have the opportunity to develop and to implement automated test platforms, integrating both hardware and software, which are consistent with a high-mix, low-volume, high-tech, and high-quality operation.

Job Responsibilities

Specify, design, and implement complex hardware modules and sub-systems

Design and implement automated test solutions for microwave and RF Products.

Identify and resolve technical problems that often occur during development of new products.

Define and implement project plans, manage milestones, and hold required reviews to assure test system readiness for product release.

Integrate hardware and software to fully support new RF products under development.

Utilize programming skills to develop automated test using LabVIEW

Design measurement algorithms for RF products.

Review and approve product specifications and customer user documentation for the product.

Requirements

B. S. or M.S. in electrical engineering, electronics engineering.

Good understanding of computers and LabVIEW

Passion for learning about and working with test and measurement industry technologies

Strong work ethic and drive to succeed

Preferred skills:

Strong understanding of RF systems, RF measurements, electronics, computers, and high-level programming languages (LabVIEW, TestStand, C/C++, Python)

Familiarity with S-parameter measurements, power accuracy, and digital modulation standards

Knowledgeable about gain, compression, and intermodulation measurements

Sources of measurement errors

Appropriate selection of RF and microwave instrumentation

Statistical analysis of data

Experience with using RF/Microwave Test Instrumentation like Oscilloscope, DMM, Signal Generators, Spectrum Analyzers, Network Analyzers and Power Meters.

Demonstrate ability to:

Work effectively in a group development environment

Effectively diagnose technical issues and propose reasonable solutions

Problem-solve effectively - diagnose technical issues and propose reasonable solutions

Take ownership of goals, project schedules, and milestones

Listen attentively and grasp fast-paced technical conversation

Quickly learn applicable technology, systems and commercial off the shelf components

Adequate knowledge of reading schematics and data sheets for components

Strong documentation and writing skills





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57826
Job Location: Driftwood, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Design Engineer

Description:
Designing electrical wiring harnesses to include component selection for connectors, backshells, sleeving, braiding, sealants, boots, transitions, etc.

Work with CAD draftsman to route harnesses in 3D CAD tools (Pro-E and/or NX)

Designing in Mentor Capital software highly desired

Must be able to obtain a security clearance if necessary.
 
Job Number: 47566
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hybrid Electrical Vehicle Engineer

Description:
*This is full time, 5-6 month contract position, located in San Jose*



We are seeking a contract Electrical Engineer who will be working on Hybrid Electric military combat vehicles. Candidate will work on vehicle design and integration of electrical/electronic components, electric power (including cable design and electronic usage and communication equipment). Daily use will include lab test equipment [oscilloscopes, power analyzers, CAN bus diagnostics tools, etc.] as well as software tools like LabVIEW [test and verification].



Daily duties will be comprised of semiconductor power switching devices and isolated gate drivers, DC-DC converter and DC-AC inverter design topologies and high-power at power levels greater than 100kW and voltages greater than 500V. Candidate will be working with with magnetics design and DC/AC military specifications (commercial power standards and testing requirement also).



Required:
*7 years’ experience in design of hybrid electric vehicles (HEV), preferably military prototype design.

*Applicant must be adept at working in a lab environment, using typical lab tools.
*Experience with vehicle networking; conducting trade studies.
*Knowledge of 28V power generation/distribution/management/battery management systems.
*Experience in creating electrical block diagrams and schematics; Experience in EMI and EMC.
*Familiar with software tools such as SPICE (Simulink or Visio are acceptable) simulation tools,
*BSEE

*Must be able to travel 25% domestically, and work overtime as needed.



Pluses:
*Experience with military tracked vehicle 28V systems; AC/DC military specifications.
*Experience with high-powers >100kW and voltages greater than 500V

*Familiar with magnetics design.
 
Job Number: 033
Job Location: San Jose, CA
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Developer - Robotic Process Automation

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

IT Developer - Robotic Process Automation
(US Citizenship Required*)
Scottsdale, AZ
2019-10169

Responsibilities:
• Develop solutions using Robotic Process Automation technology.
• Perform software requirements analysis, participate in research, design, develop and test software and tools, to include development of new work products or enhancing existing applications, systems or embedded products.
• Code, test, integrate and document software solutions.
• Apply principles and techniques of computer science, engineering, and mathematical analysis to the development of software.
• Participate in internal review of software components and systems.
• Receive general instructions and guidance from immediate supervisor and works on problems with defined scope, schedule and expectations.
• Follow standard practices and procedures in analyzing situations or data from which answers can be readily obtained.
• Generally works within an identified work group and responsible for resolution of problems and issues of moderate scope and complexity.
• May provide work direction to other employees as a technical lead.
• Failure to accomplish results or errors may cause project delays or require the allocation of additional resources.
• Collaborate with project leaders and other professionals within the Engineering department.
• May work with organizations outside engineering or with external customers.
• Build stable working relationships internally.
• Keep abreast of technology trends and champions new ideas and product and process improvements.

Qualifications:
• Must be able to obtain a Security Clearance if required.
• Travel may be required.
• Professional and experienced understanding of software engineering concepts, principles, and theories and skilled at applying technical standards.
• Considerable knowledge of the software development process.
• Considerable ability to grasp and apply new information quickly and handle ever increasing responsibility and assignments with growing complexity.
• Shows initiative on assignments, and professionally executes projects with little direction.
• Exercises independent judgment within defined procedures and practices to determine appropriate action.
• Considerable ability to be a team player who thrives in collaborative environments and revels in team success, meeting and exceeding personal and team commitments.
• Considerable knowledge of software tools supporting Integrated Development Environments (IDE), version control, defect reporting and scripting.
• Ability to be creative, innovative and responsible, and able to master considerable decision-making skills.
• Skilled at learning and applying company policies and procedures to resolve more complex issues.
• Considerable proficiency in Microsoft Office applications.
• Considerable written and verbal communications skills.
• Considerable ability to recognize and clearly report relevant information.
• Skilled in communicating issues, impacts, and corrective actions.
• Considerable ability to use the appropriate standards, processes, procedures, and tools throughout the software development life cycle to support the generation of technical engineering products.
• Experience developing Robotic Process Automation solutions.
• Experience with UiPath (RPA software) is preferred.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Software Engineering or a related technical field, combined with a minimum of 2 years of relevant experience; or Master's Degree.
• Agile experience preferred.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10169
Job Location: Scottsdale, AZ
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Clearance CA

Description:
166412 Job Title: Industrial Engineer

Work Site Address : Palmdale, CA 93599
Job Number: 2070-1
Max Pay Rate: $75.00/hr
Start Date: 10/14/2019
End Date: 12/10/2020
Position Type: Contract


Job Summary:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.

May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Lean Manufacturing No 4
Areas of Expertise Project Scheduling No 7
Soft Skills Interpersonal Skills No 7
Software Skills MS Office - Intermediate Level No 4
Technical Skills Data Analysis No 6
Technical Skills Scheduling No 7
Technical Skills Trend Analysis No 3

Qty 4 positions
 
Job Number: JE-2070-1S6
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration:12 Months

Job Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13283
Job Location: Berkeley,, MO
Per Diem: available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO)

Description:
** An active SECRET (or higher) DoD Security Clearance is required **
** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **
** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must be local so they can interview in-person **

Duties:
-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications:
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies:
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies:
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information system

The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
 
Job Number: 11733
Job Location: Jupiter, FL
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer- Job Id 38702

Description:
We have an Excellent Contract position for an Information System Security Officer to join a leading Company located in the Jupiter, FL area. When applying, please enter the job ID.

** Candidate must possess an active Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package.
Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS.
Report all security-related incidents to the ISSM.
Conduct periodic reviews of ISs to ensure compliance with the security authorization package.
Serve as a member of the CCB, if designated by the ISSM.
Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change.
Formally notify the ISSM when changes occur that might affect system authorization.
Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly.
Ensure all IS security-related documentation is current and accessible to properly authorized individuals.
Ensure audit records are collected and reviewed.
ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of Information System Security.

Basic Hiring Criteria:
Undergraduate degree in Information Technology or Cyber Security, but candidates with proven experience will not be excluded from consideration.
Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP).
Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP).
Experience with Microsoft Windows and/or Linux system administration (2+ years).
Familiarity with configuration control and change management (SCCM).
Experience with networking concepts (switches, network security, TACLANE).
Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis).

Desired Qualifications:
Operating System and networking certifications.
Knowledge of and experience with compliance with government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.).
Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting a critical information system.
 
Job Number: 38702
Job Location: Jupiter, FL
Rate: $70.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information Technology Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Information Technology Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-10109
Responsibilities:
• Define and validate complex requirements for new and revised hardware and software systems.
• Lead the design, development and test of applications and systems.
• Lead development of trade studies and other forms of analysis to formulate optimum solutions for users.
• Guide and coordinate development and deployment of new or revised processes in support of new computing systems, including documentation and training.
• Facilitate development of system integration strategies and architectures that promote use of common tools and processes.
• Lead and coordinate integration of new technologies and the transition from legacy systems to support business requirements.
• Mentor less experienced employees.
• Work under minimal direction.

Qualification:
• This position requires a Secret Security Clearance at time of hire.
• Skills: Linux, Linux Scripting, Unix Administrator.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 9+ years of experience, Master's Degree with 7 or more years' experience or PhD with 4 or more years' experience.
• Bachelor, Master or Doctorate of Science Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10109
Job Location: Berkeley, MO
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Designer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
• Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
• Develops designs for form/fit/function to meet customer and design criteria.
• Provides designs for the fabrication process including sheet metal, extrusions and inject molding.
• Familiarity with structural analysis methods, load paths, and material properties.
• Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
• Makes recommendations to engineering lead/management.
• Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.

Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
• Masters’ degree in Engineering preferred.
• Minimum of 10 years engineering design experience directly related to mechanical/interior design required.

Knowledge, Skills and Abilities:
• Working knowledge of conceptual design development of aircraft interiors.
• Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
• In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Familiarity with 14CFR Part 23/25.
• Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
• Proficiency in Teamcenter (or equivalent PLM tool).
• Ability to work independently or within a team environment.
• Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
• Ability to work cross functionally with Quality and Production to resolve issues on the production line.
 
Job Number: 28-007
Job Location: Greensboro, NC
Rate: $50 - $60/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lab Test Technician(Electrical/Electronic Equipment)

Description:
• Plans, conducts and documents complex tests on products, systems, components, materials, and manufacturing processes and technologies.
• Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies.
• Coordinates test requirements determines test methods and capabilities.
• Conducts system test preparations by guiding system integration, fabrication, modification, setup, checkout and teardown.
• Performs test article configuration control.
• Conducts complex tests, analyzes data and documents results; participates in test readiness reviews.
• Identifies and resolves test anomalies.
• Troubleshoots and resolves complex laboratory and test-related problems.
• Coordinates test laboratory activities, maintenance and repairs, and personnel training.
• Assists government agencies, safety and hazardous materials teams in the event of emergencies.
• Coaches and trains others.
• Works under minimal direction.
 
Job Number: Test_MD
Job Location: Germantown, MD
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Launch Integration Engineer

Description:
Launch Integration Engineer--Orbital Test Vehicle (OTV) Project

Needs experience in spacecraft to Launch Vehicle integration and test, including associated flight and ground hardware, software, procedures and facilities to join our team in support of a top defense program at the Kennedy Space Center in Florida.



Key Duties:

  • Defining, coordinating, documenting, and verifying functionally diverse complex internal and external physical, functional, and operational requirements and associated interfaces.

  • Developing, coordinating, and documenting CONOPS involving multiple diverse internal and external stakeholders, flight hardware, ground support equipment, and facilities.

  • Supporting assessment and collaborative resolution of complex cross-functional technical issues amongst multiple diverse stakeholders.

  • Facilitating recurring meetings, technical exchanges, and reviews involving multiple internal and external organizations across multiple engineering disciplines.

  • Driving results through the development, implementation, and maintenance of rigorous processes, tools, schedules, and metrics.

  • Maintaining current data and providing status on technical, schedule, and cost performance and issues.


Required Skills, Experience, & Education:


  • Must possess active Top Secret (SSBI) security clearance.

  • Due to facility security requirements, only US Citizens are eligible for consideration at this time.

  • Experience writing Interface Control Documents, defining and scripting process flows, audit and stage support equipment, support launch campaign execution, etc.

  • Bachelor's degree with 5 or more years of directly-related experience, Master's degree with 3 or more years of directly-related experience, or a PhD in engineering, computer science, mathematics, physics, or chemistry.



 
Job Number: 19-45758
Job Location: Merritt Island, FL
Rate: 150000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-11-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Operator - 2nd shift / Micrometer CNC Caliper Measuring Tools - no clearance MA

Description:
166770
Job Title: Machine Operator

Work Site Address including City, State, Zip: Marion, MA 02738
Job Number: 2564-1
Max Pay Rate: $19.00/hr
Start Date: 11/18/2019
End Date: 11/16/2020
Position Type: Contract

Job Summary:
Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws.

May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Familiar with Mikrometer, CNC and/or Caliper Measuring Tools.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Computerized Numerical Control (CNC) No 1 < 1 Year Qty 1 position This position is 2nd Shift This position does not require a BS Degree Manager would prefer candidates familiar with Micrometer, CNC and/or Caliper Measuring Tools. Required OT Hrs/Wk: 10.00
 
Job Number: LMRMS-2564-1
Job Location: Marion, MA
Rate: 19/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manual Assembly Operator

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Manual Assembly Operator
(US Citizenship Required*)
Bloomington, MN
2019-10130

Responsibilities:
• Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
• Read and interpret basic schematics and drawings.
• Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units.
• Integrate sub-assemblies into final hardware.
• Perform final assembly of small systems.
• Perform basic electrical tests Performs more complex rework and refurbishment of hardware and systems.
• May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product.
• May conduct manufacturing inspections on processing line in accordance to quality specifications.
• May be involved in packing, movement and protection of finished product.
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
• Perform general fabrication and marking.
• Operate less complex equipment.
• Perform basic loading and configuring of customer/standard software on customer device.
• Perform basic inspection per documentation.
• Accurately complete process paperwork and entering data into the applicable work order management system.
• Perform mixing of solvents and paints per specification.
• Support continuous improvement activities and participates in problem solving activities.
• Maintain a clean and orderly work area.
• Support safety/housekeeping standards.
• Contact are primarily within immediate work unit and direct supervisor.
• Normally follow established procedures on routine work with limited supervision, requires detailed instructions only on new assignments.

Qualifications:
• This position supports a 2nd shift work schedule.
• Clear manufacturing process skills.
• Clear knowledge of polarity and inspection criteria.
• Clear knowledge of Bills of Material (BOM).
• Clear knowledge of applicable work order tracking Management systems.
• Clear communication skills, both written and verbal.
• Ability to work in team environment.
• Clear computer skills.
• Clear knowledge of measuring equipment and math.
• Ability to use various computer software applications to analyze and manage data.
• Ability to interpret basic documents, work instruction, and schematics.
• Ability to exhibit adaptability/flexibility.
• Ability to lift a minimum of 15 pounds.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent plus 2 years of relevant experience.
• J Standard Certification for soldering.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10130
Job Location: Bloomington, MN
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.

Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
* Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11793
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer- Solidworks

Description:
Job Responsibilities
•Reviews engineering designs to provide tooling, equipment, operation sequence, and other technical wherewithal to enable marine craft and land vehicles to be manufactured profitably.
•Seeks alternative manufacturing strategies to reduce production costs, increase output, or improve product quality.
•Analyzes engineering design to provide feedback to improve manufacturability of components and assemblies.
•Calculates labor hour and learning curve projections for new manufacturing programs.
•Oversees creation and maintenance of Manufacturing Bill of Material (MBOM) to break engineering product structure into logical manufacturing units and sequence to enable MRP order releasing, scheduling, and purchasing activities.
•Authors and maintains shop floor technical work instructions.
•Participates in Root Cause / Corrective Action (RCCA) activities to troubleshoot and prevent production defects.
•Ensures manufacturing processes and procedures comply with regulatory and contractual obligations.

Qualifications

Job Qualifications:
•Experience in shipbuilding, marine small craft, aluminum and steel welding, or construction of large fabricated assemblies is desired.
•Experience with Enterprise Resource Planning (ERP) / Material Requirements Planning (MRP) software and Solidworks or other 3D CAD programs is desired.
•Must be a U.S. citizen or Permanent Resident with the ability to obtain and maintain a security clearance.
•Must possess effective written and oral communication skills and the ability to work in a collaborative team environment.
•Applicants are expected to have the ability to apply logical or scientific thinking to a wide range of intellectual and practical problems.

Education Requirements: •Bachelor’s degree required. Preferred degrees are Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Naval Architecture, or Marine Engineering.
•Preferred years of experience per level: ◦Manufacturing Engineer: 2-6 years
◦Sr Manufacturing Engineer: 6-10 years.
◦Note: Level will be determined based on relevant experience, scope of role, reporting structure and management’s discretion
 
Job Location: New Orleans, LA
Rate: 45-48/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - no clearance TX

Description:
166820 Job Title: Master Planner

Work Site Address: Fort Worth, TX 76108
Job Number: 2559-1
Max Pay Rate: $75.00/hr
Start Date: 11/12/2019
End Date: 12/18/2020
Position Type: Contract


Job Summary:
This position provides Planning/Scheduling support to meet multiple immediate requirements across Aeronautics Line of Business.

Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.

Skills: Category Name Required Importance Experience
Soft Skills Ability to meet deadlines No 9 6 + Years
Soft Skills Analytical Ability No 9 6 + Years
Software Skills MS Excel Advanced No 1 6 + Years
Technical Skills Earned Value Analysis No 1 6 + Years

Qty 2 position
 
Job Number: JE-2559-1
Job Location: Fort Worth, TX
Rate: 75/hr max
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Process Systems)

Description:
Key Duties:

  • Develop concepts for new piping systems and provide flow, flexibility, thermal, structural, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Serve as the design point of contact or lead designer on larger, more complex projects.

  • Work with the project managers and project engineers to ensure that design input into cost, schedule, and other project-level decisions is accurate and complete.

  • Provide guidance to and check the work of less experienced engineers.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Provide engineering guidance to support the procurement of pumps, valves, heat exchangers, pressure vessels, or other hardware necessary for the fabrication and installation of the proposed design.

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 5 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Chemical or Mechanical Engineering.


 

Desired Skills, Experience, and Education:



  • Experience with interactions with fabrication and machine shops.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Familiarity with Caesar II software package.

  • Familiarity with Applied Flow Technology (AFT) Arrow, Fathom and Impulse software packages.

  • Familiarity with Autodesk Inventor and AutoCAD software packages.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46114
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Must have excellent communication and interpersonal skill.
Must have experience or familiarity with production floor support for a combat vehicle where heavy aluminum welding is done
Must have experience using CREO software and the Windchill database
Must have experience reading and interpreting highly complex structure weldment drawings and models
Extensive knowledge/experience with drawing, model and GD&T standards and application
Ability to evaluate and solve complex technical problems working with program team members and others that require extensive investigation and analysis
Conducts effective meetings, discussions and presentations.
 
Job Number: 47354
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer Skills and Qualifications:

Requirements Analysis, Design Skills, CAD, Presenting Technical Information, Equipment Maintenance, Conceptual Skills, Project Management

Mechanical Engineer Job Duties:

  • Evaluates mechanical and electromechanical systems and products by conducting research and applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials in the design or selection.

  • Confirms system and product capabilities by designing feasibility and testing methods

  • Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components.

  • Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes.

  • Maintains product and company reputation by complying with government regulations.

  • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services.

  • Perform initial and ongoing design reviews

  • Deliver documentation offering a critical analysis and suggestions for correcting errors

  • Identify process deficiencies and develop solutions to improve those deficiencies

  • Submit a scope of work for each project that includes budgetary numbers and the goal of each project

  • Develop detailed CAD drawings and review drawings

  • Liaising with suppliers




Job Requirements:

Bachelor's Degree in Mechanical Engineering required

2 years project management experience

4 years engineering experience Strong knowledge of CAD/CAM software and drafting procedures

Excellent prioritization and project development skills

 






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-43181
Job Location: Phoenix, AZ
Rate: 34.62USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Machine Design)

Description:
Key Duties:

  • Develop concepts for new hardware and provide thermal, structural, flow, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Designing one-of-a-kind of mechanisms, wind tunnel models, and test fixtures including associated stress analysis.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 10 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic and feasible designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Mechanical Engineering.


 

Desired Skills and Experience:



  • 15 or more years of experience designing machines, mechanisms, stress analysis, etc.

  • Experience with interactions with fabrication and machine shops.

  • Working understanding of Geometric Dimensioning and Tolerance (GD&T).

  • Familiarity with wind tunnel model design and fabrication.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Experience with injection mechanisms.

  • Experience with positioning and control systems.

  • Experience with prototyping and checkouts.

  • Experience with ANSYS FEA software package.

  • Experience with AUTODESK INVENTOR CAD software.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46109
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-29 00:00:00.0
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Test Engineer

Description:
Test & Evaluation Engineer 3

Location: New Orleans, LA
Duration: 6 Months

Job Description:
Engineer will participate in leak testing of production and fluid systems on the SLS core stage. This includes updating test procedures, test setup, test conduct, test tear down, and paperwork closure. Included in this effort includes components on all major components of the rocket as well as multiple integration points. Leak testing will consists of detection using bubble soap and mass helium spectrometers.
Candidate must have the specific Leak Testing (LT) certification per ANSI/ASNT CP-105, Standard Topical Outlines for Qualification of Nondestructive Testing Personnel, , Level I, II, or III. Leak test methods include Bubble testing, Pressure Change, and Mass Spectrometer Testing. In the event that an ASNT certification is not held by the candidate, the candidate shall meet the training, practical experience, and examination criteria for certification per ASNT Recommended Practice No. SNT-TC-1A.

Education / Experience:
Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.
 
Job Location: New Orleans, LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Planner Specialist OH

Description:
Planner Specialist

Pay rate range between $25-$30/hr DOE
Working Hours: M-F 40 hours per week. Typically 7:00AM - 4:00PM, but we can be flexible.
Assignment would be from now till the end of the year.

WORK LOCATION: MENTOR OH
Gas Turbine Fuel Systems Division
8940 Tyler Boulevard
Mentor, OH 44060

POSITION SUMMARY

Ensures performance to the master production schedule to achieve division objectives for customer service, inventory levels, and configuration management. Plans, prepares, issues, and controls difficult production schedules and material requirements to ensure a controlled flow of approved materials timed to meet production requirements.


ESSENTIAL FUNCTIONS

1. Determines production priorities by studying master production schedule and customer requirements.

2. Acts as a primary customer contact for matters regarding production status, schedule changes, shipping information, and returned material. May adjust master schedule in response to customer feedback/requirements and manufacturing capacity.

3. Identifies variety of raw material and component requirements for production from engineering and production specifications and schedules of diverse or difficult scope and complexity. Ensures accurate item master file and bill of material.

4. Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed. Evaluates, recommends, and implements changes to the overall planning process consistent with continuous improvement goals.

5. Coordinates cross-functional activities with Quality Assurance, Manufacturing, Purchasing, Engineering, Inventory Control, Shipping/Receiving, and Contract Administration to ensure a smooth flow of materials through the production process and consistent information regarding status and priorities.

6. Evaluates materials supply and demands. Prepares work orders or purchase requests for the production or purchase of components or parts to support a master production schedule, shop load, and inventory requirements. Coordinates material movements between internal work and storage areas and/or outside processing or suppliers to ensure materials are available when needed.
7. Schedules and expedites the movement of parts by means of move orders and/or stock transfers to meet customer shipping dates and minimize inventory.

8. Applies continuous improvement techniques and methods to internal processes and systems. May lead or be assigned to a special project team.

9. Analyzes inventory usage, scrap, and shrinkage. Recommends and implements any appropriate actions to minimize loss, reduce inventory, and/or increase inventory turnover that would support inventory level objectives.

10. Analyzes proposed changes in methods, schedules, and materials. Recommends actions by analyzing and interpreting data and making comparative analyses.

11. Resolves problems concerning overshipments, shortages, engineering changes, and cancellation of orders.

12. Maintains configuration control on all open orders and appropriate data files as required by division policies and procedures.

13. Maintains professional and technical knowledge by attending educational workshops, reviewing technical or trade publications, establishing networks, and/or participating in professional associations.

14. Complies with federal, state, and aerospace industry regulations; ensures adherence to requirements and advises management on needed actions. Complies with policies and procedures in Government/Commercial Practices Manual (GPM/CPM).

15. May provide leadership to others in department. Acts as prime contact on high level projects. Establishes goals and objectives required to complete projects. Trains and mentors less experienced employees.

16. Shares specialized knowledge with others. Represents company on high-level projects. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional or project team responsibilities (e.g. continuous improvement).

Job Requirements: QUALIFICATIONS

Education and Experience
1. Bachelors degree (BA) in Business Administration or a related field, or an equivalent combination of education and experience which has provided both theoretical and practical knowledge in the field.
2. Demonstrated ability to perform the essential functions of the job typically acquired through six or more years of related experience.
3. APICS certificate preferred.
4. Thorough knowledge of manufacturing resources planning theories, principles, and industry practices.
5. Thorough knowledge of manufacturing resource planning systems, business application software, and interface operations.
6. Ability to effective assess and implement continuous improvement methods (e.g. pull systems, process mapping, JIT).
7. Knowledge of legal, regulatory, and internal policy requirements related to production control.
8. Ability to work on a variety of problems of diverse scope and complexity where analysis and evaluation of various outcomes require tradeoffs.
9. Ability to solve a wide range of difficult problems in imaginative and practical ways and evaluate alternative solutions that may require coordination across multiple teams. Ability to establish goals and objectives to complete projects.
10. Ability to read, analyze, and interpret policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities

Demonstrated ability to perform the essential functions of the job typically acquired through six or more years of related experience. In addition, has completed a Bachelors degree in Business Administration or a related field and has passed the majority (3 or more) of the CPIM national certification exams; OR, is CPIM certified.

Knowledge, Skills and Abilities

Thorough knowledge of manufacturing resources planning theories, principles, and industry practices. Thorough knowledge of manufacturing resource planning systems, business application software, and interface operations. Ability to effective assess and implement continuous improvement methods (e.g. pull systems, process mapping, JIT). Knowledge of legal, regulatory, and internal policy requirements related to production control. Ability to work on a variety of problems of diverse scope and complexity where analysis and evaluation of various outcomes require tradeoffs. Ability to solve a wide range of difficult problems in imaginative and practical ways and evaluate alternative solutions that may require coordination across multiple teams. Ability to establish goals and objectives to complete projects. Ability to read, analyze, and interpret policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once.

(The essential functions have been provided as examples of types of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions of the job. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job.)
 
Job Number: JK-9506
Job Location: Mentor, OH
Rate: 30/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer System Architect 3 CA

Description:
Principal Engr Sys Architect 3 (Job Number: 19026177)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Nov 20, 2020

Pay rate: $55.00 - $60.00
Location: San Diego
Schedule: 9/80
Duration of assignment: Up to 1 year

Develops computer systems specifications that address business requirements and that fit with the company's system architecture standards. Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities. Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.

Develops and maintains software configuration management tools to support configuration identification, control, reporting, and delivery of internally developed software products. Performs configuration management and release engineering tasks to ensure new software product operating parameters are documented, comply with standard hardware configurations, and are logistically sustainable. Designs, develops, automates, and maintains productivity tools using programming, database or scripting languages to improve software modeling and development. Designs and implements build procedures that are used to support software product development and use. May develop software configuration standards for program-wide use. May train software developers in the use of configuration management tools and the implementation of software quality standards.


Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 9 years of engineering experience
•Must have experience with at least one of the following Configuration Mgmt Tools: CMS (VMS), ClearCase, ClearQuest, Visual SourceSafe or TCent

Preferred Qualifications:

•Master’s Degree in a Technical Field
•Atlassian Tool Suite (JIRA, GIT/Subversion)
•TeamCity
•Wind River Workbench 3.0
•Tornado 2.2
•MKS
•Visual Studio 2008
•Visual Studio 2010
•Visual Studio 2013
•Cygwin
 
Job Number: JK-1800ATO
Job Location: San Diego, CA
Rate: 55-60/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 - COMSA CDDC (C/L) FL

Description:
166209/1804 Principal Software Engineer 3 - COMSA CDDC (C/L) (Job Number: 19027609)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Dec 16, 2019

Target End Date: Dec 11, 2020

Pay Rate: $59/hr

Work Schedule? 9/80

Duration of Assignment: Up to 1 year


Essential Functions:

•Interface with multidisciplinary Integrated Product Teams
•Review, interpret, and analyze formal and informal requirements
•Create test plans and procedures that acknowledge technical and schedule constraints
•Executive test procedures to ensure requirement compliance
•Perform troubleshooting as required
•Document test results and create test reports as needed
•Solve writing defects and perform component-to-component integration

Basic Qualifications:

•Bachelor’s degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university plus 5 years of experience in software engineering OR
?Master’s degree in a Science, Technology, Engineering, or Mathematics (STEM) discipline from an accredited university plus 3 years of experience in software engineering
•Experience developing software/writing code in C/C++


Preferred Qualifications:

•Experience integrating and testing software subsystems
•Experience in scripting languages such as Python
•Experience in production development programs using languages such as C, C++
•Familiarity with safety/mission critical air worthiness test criteria
•Familiarity with flight testing prerequisite criteria
•Familiarity writing test scripts
•Experience with Atlassian Tool Suite with add-ons like GIT and Confluence
•Experience with Hardware Software Compatibility Matrix processes
•Experience with Agile software development processes
 
Job Number: JK-1804ATO
Job Location: Melbourne, FL
Rate: 59/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Quality Engineer Temp UT

Description:
PQE - Procurement Quality Engineer Temp

1 year assignment
Pay rate $30-$40/hr DOE
Technical Degree required...must have technical degree

Work in Ogden:
1425 W 2675 N
Ogden UT 84404

Working hours: Monday-Friday 8:00am-5:00pm
OT Possible, but not likely

Looking for the following experience in addition to job description...
-5 years experience
-Auditing
-Problem Solving skills - Six Sigma, etc
-ASQ Certified preferred but not required
-Blueprint reading, GTD knowledge
-PPAP preferred
-Strong computer skills

Develops, modifies, applies and maintains quality standards and evaluation methods for products and processes. Provides moderately complex statistical information for quality improvement by determining and applying testing methods and criteria. Coordinates and guides technical evaluations, analysis, and related data acquisition processes to ensure division quality objectives are achieved.

1. Bachelors degree (BS) in Engineering or a related technical discipline. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. American Society for Quality certification desired. Practical knowledge of state-of-the-art inspection and quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts and general business operations.
3. Knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to field.
4. Ability to effectively apply continuous improvement principles and techniques to quality and manufacturing functions.
5. Ability to use standard business software applications and/or specialized data analysis tools.
6. Ability to work on a variety of problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact; work within general work objectives regarding projects and team goals.
7. Ability to read, analyze, and interpret scientific and technical journals, and financial reports.
8. Ability to effectively communicate and present information to team members, team leaders, and top management; respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
9. Ability to interpret a broad variety of technical instructions in mathematical or diagram form that include several abstract and concrete variables.
10. Ability to define problems, collect data, establish facts, and draw valid conclusions.
11. Ability to use full discretion in selecting procedures and techniques to apply to work and determine priority and order of assignments.
12. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-9309
Job Location: Ogden, UT
Rate: 30-40/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician VA

Description:
166567 Job Title: Production Test Technician

Work Site Address: Manassas, VA 20110
Job Number: 2346-1
Max Pay Rate: $30.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Roles and Responsibilities
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Typical Minimums
Associate degree in electronics or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Testing No 1
Soft Skills Communication Skills No 1
Soft Skills Multi-tasking No 1
Soft Skills Troubleshooting No 1
Software Skills Linux No 2
Software Skills MS Office No 1 1 - 2 Years
Software Skills MS Office - Intermediate Level No 3 < 1 Year Software Skills MS Windows No 1 2 - 4 Years Technical Skills Blueprint Reading No 1 Technical Skills Cisco No 2 Technical Skills Electrical Testing No 1 Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 Technical Skills Tester No 1 Technical Skills User Acceptance Testing No 3 Qty 1 position
 
Job Number: LMRMS-2346-1ATO
Job Location: Manassas, VA
Rate: 30/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
We have a great opportunity for our client's Propulsion group!

Duration – 9-12 months
Exempt position (salary)
Pate Rate: Open

Experience:
Must have system level engineering experience on engine installations.
Turbo Prop install experience is preferable, but not mandatory.
Must have a BS degree (BSAE, BSME).
System testing required for PDR.
Experience with engine installation into aircraft for PDR.
Spec out system parts.
Coordinate/support manufacturing.
Select and manage suppliers.
Some experience with CAD software like Catia V5, UG NX, etc.
Experience doing thermal analysis of engine installations.
US Citizen or permanent resident.
 
Job Location: Manassas, VA
Rate: Open
Per Diem: Split
Duration: 12+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Project Manager

Description:
PDS Tech, Inc. is seeking a Project Manager in Auburn Hills, MI.

Responsibilities:

  • Product development process and ensure processes are followed and all product documents and data are completed and stored.
  • Review and manage project scope, goals, resources, and deliverables.
  • Track and report project costs, milestones, and other key project metrics.
  • Prepare team for internal and external design reviews to minimize technical and commercial risks.
  • Execute change management; document scope requirements and associated risks, track and revise project timeline, forecast project cost and communicate through the appropriate channels.
  • Provide regular status updates and be the contact person/interface to all involved departments & parties.
  • Drive engineering and operations teams to keep projects on time and on target.
  • Manages projects in all aspects of New Product Introduction processes from project initiation through successful transfer into production in manufacturing locations worldwide.
  • Suppliers lead.
  • Customer satisfaction oriented.

Qualifications/Education:
  • Minimum five years’ experience as a project manager managing multiple projects in engineering and production environment.
  • Knowledgeable of E/E and/or software engineering, design and analysis. Previous E/E and/or software engineering design and analysis experience is a bonus. Prefer experience working with integrated display units.
  • Bachelor’s degree or equivalent required; degree in technical field preferred.
  • Must be able to read, write, and speak English fluently.
  • Proficient in Microsoft Office Suite including MS Project.
  • Experience with Catia v5 is helpful.
  • Self-motivated with ability to function in a high energy, fast paced team environment with minimal direction.
  • Experience collaborating across multifunctional teams.
  • Must have excellent planning and organizational skills.
  • Able to build up new customers relationship and trust, to develop and consolidate long terms cooperation.

 
Job Number: 1910101837
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 01/20/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033g9xQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Vehicle Systems Engineer

Description:
Analyze product design specifications and requirements to develop in process and final Acceptance Test Procedures for hardware and software deliverables.
Review test procedures to define equipment requirements as well as development of test equipment.
Conduct or assist with System level testing on prototype or production vehicle systems for the purpose of product acceptance.
Evaluate and test vehicle software releases to determine that all functional requirements have been satisfied.
Collect and analyze vehicle test data, summarize results to determine compliance.
Establish and maintain Quality Controls in support of vehicle modification and upgrade programs at customer facilities.
 
Job Number: 47253
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer (DOD Secret Clearance)

Description:
Summary:
• This position will support electromagnetics and radio frequency (RF) testing.
• Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must.
• The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up.
• Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Required Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable o Minimum 5 years with B.S. or related experience, 3 years with M.S.
• Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
• Solid background in Electromagnetics
• Working experience with test and evaluation of microwave devices
• Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
• Experience with commercial data analysis software, such as Knowbell and/or Pioneer
• Familiarity with Computational Electromagnetic (CEM) tools
• Willingness to work cooperatively in a team
• Proficient in MS Office suite
• Experience fostering and leading in a culture of continuous improvement
• Excellent verbal and written communication skills

Preferred Qualifications:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc.
• Familiar with common material measurements for the extraction of electrical properties
• Knowledge of composite manufacturing processes
• Ability to work across multiple projects and follow through to completion

Competencies for Success:
• Ability to multitask and prioritize
• Strong attention to detail
• Initiative, self-starter, adaptable, and high motivation for excellence
• High energy, results oriented, self-motivated / self-reliant, team player
• Strong interpersonal skills with ability to interface with an organization at all levels
• Ability to work in a dynamic, fast paced environment
 
Job Number: 1910103102
Job Location: Magna, UT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
Required Skills/Attributes or Domain Knowledge:
•Mix of hardware RF/Digital and software skills (C/C++)
•Background and working knowledge in RF theory and concepts
•Test design and integration background
•Candidate must be hands on person and have personal experience with test.

Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience. Will accept candidates with more experience (8+ years) to fill at a higher level
 
Job Number: 1910107903
Job Location: Linthicum, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Software Engineer(Active Secret Clearance)

Description:
Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system.
Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
• Aircraft and Avionics systems Domain knowledge
• Real-time Embedded Software Development
• Experienced with C++, ADA, and other programming languages
• GreenHills, ADACore, VxWorks, Visual Studio development environment
• Knowledge of one at least few of these tools: DOORS, Clearcase, ClearQuest, Git, VersionOne, JIRA
 
Job Number: RTSE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Industrial Controls Engineer

Description:
JSG is hiring a Senior Controls Engineer in Monrovia CA

Responsibilities:

Ability to analyze complex data and present to management and engineers in understandable discussions
This requires strong technical and social aptitude for written and verbal communication
Identify obstructions and issues early to Project Managers and Management
Plan with System Engineering Manager and V.P. of Operations and Systems methods for long term Systems Group sales growth and cost reductions with improved quality
Complete pre-sale conceptual design, schedule, and cost estimation of software, electrical, and mechanical for semi-automated and fully automated industrial processing workstations developed from communication with customers
Implement HMI and GUI integration for system operation, motion control, laser control, resistance welder control, machine vision (Cognex), data collection and analysis, file management, and networking capabilities
Develop Structured, re-useable low-level and high-level motion control system code for Delta-Tau, Aerotech, Allen Bradley, and similar motion systems implementing controls and I/O functions.
This requires a strong background in motion control and S.T.E.M.
Supply mechanical design suggestions for a robust operation to mechanical engineers for detailed design implementation
Create Software Design Specifications (SDS) and Hardware Design Specifications (HDS) based on User Requirements Specifications (URS), purchase orders, quotations, sales orders, and any additional compliance documents
Build, develop, and evaluate prototypes for automation and control systems based on detailed SDS and HDS
Develop laser optics path and vibration isolation designs with input from Applications and Advanced Technology Departments and customer application results
Directly responsible for ensuring continuous Systems robotics, vision, motion control, and pick & place improvements
Experienced in kaizen methods applied to engineering and controls is a plus
Education/Experience:

Knowledgeable in software design tools and environments including .NET, Visual C++, C#, current Experience in C# is a plus. Fundamental background in Software Engineering.
Four-year degree in computer science, engineering, physics, or related discipline required. Masters Electrical engineering, Automation or Control Engineering preferred.
8 years+ experience in designing custom motion control, HMI, robotics, pick & place, and hardware for automated control systems.
3 years+ experience in designing custom machine vision applications preferred.
Experience with lasers and optics helpful
Electrical engineering design experience; Solidworks Electrical is a plus.
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion, longer-term projects.
Preferred applicants will have experience in DLL generation for selected software-controllable systems components
Ability to travel occasionally
 
Job Number: 375699
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manufacturing Operations Technician

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Senior Manufacturing Operations Technician
(US Citizenship Required*)
Scottsdale, AZ
2019-10127

Responsibilities:
• Maintain and create work instructions using a variety of software tools.
• Maintain and trouble shoot the shop floor system (Solumina and Eclipse).
• Work well in a Space traceability Environment.
• Seek out opportunities for process improvements and continuous improvement.
• Perform a variety of systems integration equipment and/or process operations involving an application of technical skills.
• Interpret engineering drawings and diagrams.
• Notify appropriate personnel for changes needed to the engineering configuration data base.
• Maintain/revise manufacturing work instructions in electronic instruction and reporting systems.
• Familiar with statistical process controls.
• Assist engineering in the set up manufacturing processes.
• Troubleshoot manufacturing system and processes issues to root cause.
• Repair and/or modify manufacturing systems under the direction of senior specialists and/or engineers.
• May perform preventive maintenance functions on manufacturing equipment.
• Implement and document basic practical solutions for process improvement.
• Execute experiments under the direction of an engineer or senior specialist.
• Communicate with internal customers include manufacturing support manager, production personnel, coach, operations manager, engineering.
• Normally works under the guidance of a more senior individual.

Qualifications:
• Department of Defense Secret Security Clearance is preferred at time of hire. At minimum must be able to obtain a Secret Clearance within a reasonable amount of time from date of hire.
• Clear understanding of computer software applications used in a manufacturing environment.
• General problem solving skills.
• General subject matter expertise in assigned area.
• Mechanical and/or electrical aptitude.
• Possesses effective verbal and written communication skills.
• General computer skills.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate’s Degree or equivalent is required combined with a minimum of 3 years of relevant experience.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10127
Job Location: Scottsdale, AZ
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Composite Structural Design Engineer (Secret Clearance)

Description:
• Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
• Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
• Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.

Candidate may participate in on-site support at product manufacturing and integration sites.

Basic Qualifications:
• 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. (Will consider years of experience/education in lieu of degree).
• Experience designing composite aircraft primary structure.
• U.S. Citizenship is required.
• Active Secret Clearance required.
• The ability to obtain and maintain access to Special Programs.

Preferred Qualifications:
• Bachelor of Science degree in STEM.
• Proficiency with NX solid modeling software.
• Proficiency with TeamCenter PLM software.
• Proficiency with FiberSim composite definition software.
 
Job Number: 1910104505
Job Location: Melbourne, FL
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Mechanical Engineer (Microelectronics Packaging Design)

Description:
• Bachelor’s degree in an engineering or science discipline
• Nine (9+) years of experience
• Experience with Autocad (2D) and NX (or other 3D modeling software)
• Familiar with Printed Wiring Board (PWB) design and fabrication
• Understanding of packaging of organic and ceramic high-density modules
 
Job Number: 1910108766
Job Location: Baltimore, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Senior Quality Engineer
(US Citizenship Required*)
Quincy, MA
2019-10116

Responsibilities:
• Design, implement, and maintain quality assurance protocols and methods for processing materials into partially finished or finished products.
• Design methods and procedures for inspecting, testing, and evaluating the precision and accuracy of production processes, production equipment and finished products.
• Perform analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary.
• Review Documents/Drawings/Instructions for conformance to requirements.
• Compare defects against standards and recommends dispositions, and verifies implementation of rework.
• Collect, organize and analyze project data, generates and/or reviews metrics.
• Perform audits, assign corrective action, and verify implementation.
• Participate in project reviews and meetings including technical design reviews, technical peer reviews.
• Verify compliance to defined requirements.
• Witness and or monitor test activities,
• Provide resolution to problems of moderate scope.

Qualifications:
• Solid knowledge of engineering (i.e., software, electrical, systems, etc) methodologies, tools, and standards.
• Solid knowledge of ISO 9001:2015, CMMI, ISO 14001ASME, ANSI, EIA, etc.
• Solid knowledge of Microsoft Office applications.
• Solid written and verbal communications skills.
• Ability to think creatively.
• Ability to multi-task.
• Solid skills in communicating issues, impacts, and corrective actions.
• Solid ability to clearly recognize and report relevant to sound quality engineering practices.
• Solid knowledge of interpretation of drawings.
• Solid skills in reviewing documents/drawings/instructions for conformance to requirements techniques.
• Solid skills in reporting quality activities, findings, and issues both in writing and verbally.
• Solid interpersonal skills.
• Solid knowledge of use of relevant inspection/measurement tools and techniques.
• Solid computer skills, both desktop software and required factory or engineering tools.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree in Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 2 years of relevant experience; or Master's Degree.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10116
Job Location: Quincy, MA
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Recruiter- Job ID 38815

Description:
We have an outstanding Contract position for a Senior Recruiter to join a leading Company located in Mason, OH.

**Position requires U.S. Citizenship.**

Major Responsibilities:
Overseeing the entire recruitment process from start to finish at assigned location(s).
Consulting with hiring managers with respect to job requirements and prepare internal / external postings.
Sourcing qualified candidates using the resume bank and all other sources.
Coordinating the interview process between the candidate and hiring manager.
Screen, interview and provide candidate recommendations for hiring manager.
Conduct pre-screening and referencing of candidates.
Negotiate offers and prepare the proper documentation (i.e. offer letters, CGRP Clearance).
Participate in Career Fairs when required.
Work with Taleo Applicant Tracking System and ensure all actions and data are updated on a daily basis for each applicant through hire date, as applicable.
Coordinate recruitment efforts with local Human Resources Manager, other HR managers and the recruitment team.
Follow company recruitment processes.
Ensure compliance with AAP, EEOC, Conflict of Interest Programs for past/current military and OFCCP regulations through daily.
Some domestic travel required for Career Fairs and Sector support/meetings.
High potential for contact with general job seekers as well as qualified candidates for technical and non-technical roles.
Extensive proactive customer service and company informational skills will be essential.
Basic Hiring Criteria:
A minimum of a Bachelor’s degree from accredited university is required for this position.
A minimum 3 verifiable years previous Engineering/ Technology Recruiting experience as a Corporate Recruiter (preferably in Aerospace & Defense) is required for this position.
Desired Qualifications:
Proven ability to develop a proactive, sustained recruitment strategy for technical engineering roles.
Previous experience using Taleo or other applicant tracking software. Proficiency using Taleo recently is highly desired.
Demonstrated track record of recruiting success in technical disciplines.
DoD Engineering recruiting and sourcing experience required.
 
Job Number: 38815
Job Location: Mason, OH
Rate: $35 to $40.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation Engineer

Description:
Reports to Manager - Simulator Engineering. Performs software troubleshooting, research, design, testing and integration of changes to ensure simulators are compliant with FAA mandated requirements and pilot/maintenance training needs. Act as project manager during the building of new simulators and vendor supported modifications.
Bachelor’s degree in Engineering or Computer Science or related degree strongly preferred. Significant technical training and experience in flight simulation required.
Demonstrated superior analytical, mathematical, organizational, decision making and administrative skills, and capability to handle multiple projects simultaneously.
 
Job Number: 10-5-19-1
Job Location: Atlanta, GA
Rate: 75.00/hr.
Per Diem: split
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECH RESOURCES LLC
Address: 537 WARREN AVE
City, State: ST LOUIS, MO 63130
Phone: 314/862-2090

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Asset Management Specialist - Job-39107

Description:
We have an Excellent Contract position for a Software Asset Management Specialist to join a leading Company located in the Rancho Cordova, CA area. Please enter Job ID when applying.

Software Asset Management Specialist in the Information Technology department will be involved in the management of software acquisition, compliance, maintenance renewals, life cycle planning, and costing. Provide oversight of hardware assets managed by the IT Outsource Organization.

Job Responsibilities:
Facilitate the business’ needs for ongoing technical support and upgrade protection on selected products by ensuring that maintenance, support and upgrade protection renewals are managed/handled/ordered in advance of their expiration.
Identify savings opportunities for renewals, software licensing, and services. Follow through with vendors and Aerojet Rocketdyne to obtain identified savings.
Manage contracts and relationships to maximize value creation and costs for software licensing, maintenance, and service offerings.
Collect information for budgeting, software compliance & inventory, contract summaries, and cost comparisons.
Ensure asset management contractual obligations are met by the ITOO
Administer software audits initiated by software publishers as well as internally initiated software audits.
Manage validation of hardware assets with IT Outsource Organization.
Review Asset management policies and procedures and ensuring ITOO’s compliance.
Generate Purchase Requisitions and receive invoices in Oracle ERP system.
Basic Hiring Criteria:
Bachelor’s Degree in Information Technology, Business, Finance or a related field.
Minimum 3 years of verifiable experience in Software Asset Management.
Proven researching ability.
IT Asset Management and Discovery Tools experience
IAITAM CSAM certification.
Desired Qualifications:
Knowledge in the ServiceNow Ticket management system.
General accounting knowledge.
Oracle Experience.
Cloud licensing experience.
Specific licensing experience in Oracle and Microsoft licensing.
 
Job Number: 39107
Job Location: Rancho Cordova, CA
Rate: $100 to $120
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Configuration Analyst

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Owns the source code management process; build automation, and deployment, while balancing best practices and business
requirements
l
l Works with software engineers to develop, capture, validate, prioritize, decompose manage, and prioritize a complete set of
user and system requirements
Tracks development, existing, and new versions of software code, and creating reports needed to deploy new software releases
Tracks and stores existing and new vendor software



EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
l BS/BA minimum in related discipline
l Demonstrated experience in managing multiple code bases (branching, baselining, labeling, etc) using GIT and/or Subversion.
l Experience developing, enforcing, and improving software configuration management processes and documents.
l Possess an intermediate understanding of scripting, Unix/Linux environments and Windows.
l Familiarity with a Configuration Management automation tool, e.g., Puppet, Ansible.
l Experience with PLM/PDM lifecycle tools: Windchill or Enovia.
l Experience with vendor software management and verification – tracking and storing existing and new vendor software.
l Experience performing CM in a software development environment.
l Deep understanding of the Software Development Life Cycle (SDLC).
l Thorough technical understanding revision control and development process.
Familiarity with an Integrated Development Environment (IDE), e.g., Eclipse, Netbeans, Visual Cafe, and test harnesses, e.g.,
Junit.
l
l Ability to work with various disciplines including software engineers, quality and operations personnel.
 
Job Location: CO
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com