Job Search Results

628 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 11:48AM Pacific Time by ContractJobHunter. )

Listings 1 - 628

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2592 - PROJECT MANAGER - cv, work doc only

Description:
Evaluate and propose state-of-the-art technology acquisition opportunities for the machining, sheet metal, composite and assembly sectors, enabling the organization to achieve technological excellence.

Evaluate, participate and manage continuous improvement initiatives required to manufacture air crafts.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, acquisition, implementation and commissioning.

Manage budget, schedule and resources in every project phase. Prepare and present progress status at different management levels.

Align resources involved in project and be the interface between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

Minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Have strengths in human resource management as part of matrix project management.

Have a PMI certification (asset).

Have good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2592
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2603 - PROJECT MANAGEMENT - cv, word doc only

Description:
Evaluate, participate and manage continuous improvement initiatives required to manufacture aircrafts & methods processes.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, implementation and commissioning.

Manage the budget, the schedule and the resources in every project phases. Prepare and present progress status at different management levels.

Align resources involved in project and be the intermediary between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

A minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Possess strengths in human resource management as part of matrix project management.

PMI certification (asset).

Good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Be passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2603
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - only 3 mths
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2604 - LIAISON ENGINEER (MRB) - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components and Interiors.

Support to Production, Design Engineering, Procurement, Methods and Quality in coordinating resolutions to
issues.

Review & trouble shooting of all Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of A/C Interior issues in conjunction with Design Engineering as required.

Review & prepare disposition on Green Aircraft issues and Create Repair Engineering Orders, as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Support production and Methods as required.

Formal education to degree level in mechanical/aerospace engineering or related field, coupled with a minimum
of one year MRB experience or three years design experience in a Mechanical or an Aerospace environment /
College degree in mechanical/aerospace engineering or related field, coupled with a minimum of three year
MRB experience or five years design experience in a Mechanical or an Aerospace environment

Requires good organizational, communication and interpersonal skills and command of the English language.

Must have a good knowledge of aircraft structure & system installation technical requirements.

Interior completion and Electrical & Systems experience would be an asset.

Requires an energetic person with a high sense of commitment, and willing to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Position is for second shift and/or weekend work requirements.

Previous CATIA, Design and MRB experience including support to production would be an asset.

***PLEASE NOTE: 3 day shift ; 2 Evening shift; 2 night Shift; 1 Weekend shift***
 
Job Number: 2604
Job Location: Canada
Rate: 56.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2605 - ENGINEERING PROFESSIONAL - ANDON - cv, word doc only

Description:
Review and approve change request pertaining to installation design activities.

Translate and apply design requirements into comprehensive design packages that meet Bombardier design practices and airworthiness regulatory requirements.

Required to provide estimates and statements of work for design related activities.

Assist in design review presentations and technical investigations.

Will also be asked to support suppliers, production and final line installations.

Produce detail and installation drawings of cabinet installation and systems installations.

Engineering degree in Aerospace or Mechanical Engineering or a Technical diploma with 3-5 years of related experience.

Knowledge of CATIA V5 is required.

Bilingual in English and French.

This position will require good integration skills when dealing with multi-discipline engineering groups and partners.

1 position day shift, 3 positions evening shift, 2 positions weekend shift, 2 positions night shift.

Knowledge of Catia V5 is required.

Previous experience with Global 7500 is a definite asset.

This position will require good integration skill when dealing with multi-discipline engineering groups and partners.

Support and define aircraft schedules is required.

Comfortable in unionized context.

Experience working in a Manufacturing environment in the aerospace industry is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.
 
Job Number: 2605
Job Location: Canada
Rate: 48.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2606 - Designer - Paint & Placards - Detailed Engineering - cv, word doc only

Description:
Produce interior completion datasets (detail, assembly and installation), 3D models and 2D drawings.

Produce macros and / or parameterize models to lighten repetitive design work.

Closely communicates with supporting functions such as Methods, Operations, Customer Support, Interior
Design, Stress, Materials and Processes and Weight and Balance.

Support requests for modifications during manufacturing.

Support integrators during conceptual phase.

Bachelor's degree in mechanical/Aerospace engineering.

Experience working with Enovia/VPM Nav and Catia V5

Are well organized and focused on projects.

Good oral and written communication skills in French and English is required.

Collaborate in a multidisciplinary team, you adapt easily to changes.

Ability to understand complex engineering issues and are innovative in problem solving.

Must be a team worker, able to work under pressure and under a minimum of supervision.

Experience in Aerospace is an asset.

Leadership is required.

Macro development is an asset.
 
Job Number: 2606
Job Location: Canada
Rate: 51.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2609 - MECHANICAL SYSTEMS INTEGRATION COMPLETION - PRODUCTION SUPPORT - cv, word doc only

Description:
Act as the technical specialist for the systems

Receive, analyze and define solutions to meet customer and operation needs.

Collaborate with different internal parties (Operations, Detailed Design, Projects, Programs, Technical, etc.) as well as suppliers on daily basis.

Lead problem resolution by identifying the right stakeholders, establishing options, collecting facts, reaching alignment on the recommendation and bringing the recommendation for decision.

Produce and Review technical deliverables and datasets (3D models and 2D drawings) and ensure that they meet technical and Client requirements.

Be in direct contact with suppliers and be responsible for the delivery of quality engineering documentation that meets Client Standards.

Identify technical impacts and lead production line support change management processes.

College or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have technical experience in interior completion on Client Platform and knowledge of requirements for aircraft systems and interiors.

Understanding of product structure and aircraft configuration.

Have experience in working with Enovia / Enovia PLM

Ability to understand complex engineering issues and are innovative in problem solving.

Are well organized and are project oriented.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Good communication skills including good English writing skills, and good English and French verbal skills.

Demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.

1 day shift ; 1 Evening shift; 1 night Shift.
 
Job Number: 2609
Job Location: Canada
Rate: 57.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3042-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 10/9/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.


Qualifications and Education Requirements
C-130 OR UH-60 experience REQUIRED

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1

Qty 4 positions
Please make sure all candidates have EITHER C-130 OR UH-60 experience.
 
Job Number: JEG-3042-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic - no clearance URGENT SC

Description:
166498
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Desired Start Date: 1/13/2020
End Date: 4/30/2020
Position Type: Contract

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging experience desired


Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 26-29/hr max
Duration: 4 months + extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight control experience required - no clearance URGENT SC

Description:
167510 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3126-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 8/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 or C-130 Experience is Strongly desired
Rigging of flight control experience required

Skills: Category Name Required Importance Experience
Areas of Expertise Hydraulics No 1 < 1 Year Areas of Expertise P-3 No 1 1 - 2 Years Qty 2 positions Must work 2nd shift.
 
Job Number: JEG-3126-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Rigging of flight controls required - no clearance URGENT SC

Description:
167509 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 3128-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
P-3 Exp or C-130 Exp desired
Rigging of flight controls required

Skills: Category Name Required Importance Experience
Areas of Expertise Flight line Maintenance Yes 1 2 - 4 Years
Areas of Expertise P-3 No 2 2 - 4 Years

Qty 6 positions
 
Job Number: JEG-3128-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Design Support Engineers

Description:
Exp. with Mechanical Design of Composite & Metallic Components & Assemblies. Catia V5, Enovia PLM, ECR's
 
Job Number: 0207
Job Location: Baltimore, MD
Rate: $70-$80 DOE
Per Diem: yes-split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Greg Ambrose
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineer

Description:
The Airframe Process Engineer is required for 2nd, or possible split shift (late 1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.

Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations.

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools.

The candidate must be flexible and highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs. There is a potential for overtime between 5 and 10 hours dependent upon Operations scheduling and applicants experience.

This position reports to Process Engineering Black Hawk Lead

This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment.

Requirements
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
• Five (5+) years of Airframe Process Engineering
• Proficiency in all processes associated with Airframe Process Engineering.
• Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
• Candidate must be flexible in regard to work schedule and willing to support weekends.
• Good communication skills
 
Job Number: 2010114361
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
167594 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3279-1
Max Pay Rate: $22.00/hr
Start Date: 2/24/2020
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

Roles and Responsibilities
May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.

Skills: Category Name Required Importance Experience
Technical Skills Knowledge of Basic Mechanical/Electrical Concepts No 3 < 1 Year Qty 1 position Pay rate $15-$22/hr. Will not get max pay rate without extensive, stable experience. Degree is not required. Supervisor is looking for candidates who are mechanically inclined.
 
Job Number: LMRMS-3729-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / 2nd shift - no clearance FL

Description:
167470 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3123-1
Max Pay Rate: $18.00/hr
Start Date: 2/5/2020
End Date: 1/24/2021
Position Type: Contract

Job Summary:
• Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.

Must be able to read instructions and identify standard SMT components.
• Must be able to work in a fast-paced environment where some overtime may be required.
• Must be able to sit for long periods of time and focus on tedious tasks.
• Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
• Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
• Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
• Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned

Qualifications and Education Requirements
Mandatory
• Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
• Ability to work under a microscope for long periods of time to perform inspection / solder repair.
• Must be able to read and interpret assembly drawings.
• Strong communication and organizational skills and ability to work in a team oriented environment.

Desired
• Experience working in a LEAN Manufacturing environment
• Strong leadership, mentoring and training aptitude
• IPC-610 Certification
• IPC J-STD-001 Certification

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Surface Mount Technology Yes 5 1 - 2 Years

Qty 3 positions
This is for 2nd shift
 
Job Number: LMRMS-3123-1
Job Location: Clearwater, FL
Rate: 18/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly and Test Technician - 2nd shift CA

Description:
Job title: Assembly and Test Technician
Request number: 6327
Number of openings: 1
Job type: Light Industrial
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 2nd
Education Requirement: High School Diploma
Driving on company time?: No
Minimum Years of Experience: 1
Maximum Hourly Pay Rate: 20
Start Date: 03/16/2020
Tentative End Date: 03/15/2021

Function:
Performs precision assembly on complex production and repair actuators. Adjusts or aligns through shimming and other means of mechanical adjustments specified by blueprint or other specification limits. Utilizes a variety of mechanical measuring equipment such as: Dial Indicators, Calipers, and Micrometers to obtain proper assembly-build requirements. Maintain dimensional accuracy on assemblies utilizing torque wrenches, fixtures, tooling, gauges, and other measuring devices. Required to work from assembly instructions both written and oral.

Education:
High School Diploma or GED. Preferred to have trade certificate from Aerospace Trade School

Other Requirements:
Manager looking for strong mechanical aptitude. Graduates from Crimson (Trade School in Southern, CA) a HUGE PLUS. They groom students to do exactly what this job entails.
 
Job Number: MB-6327
Job Location: Torrance, CA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - 2nd shift / C-130 required aircraft modification experience require / no clearance SC

Description:
167551 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3235-1
Max Pay Rate: $29.00/hr
Start Date: 2/17/2020
End Date: 2/17/2021
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electro-mechanical, and/or optical areas. Installs wire harness on aircraft, to include clamping, tying and terminating. Performs continuity checks.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.

Qualifications and Education Requirements
Modification experience required
C-130 experience required
Modification installation experience

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1 4 - 6 Years

Qty 1 position
This is a full time 2nd shift position.
 
Job Number: JEG-3235-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / Aircraft MODIFICATION experience REQUIRED - no clearance URGENT SC

Description:
167479 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3125-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 7/10/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qualifications and Education Requirements
Aircraft MODIFICATION experience REQUIRED
P-3 experience a plus but not required

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 1 - 2 Years

Qty 4 positions
 
Job Number: JEG-3125-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Systems Design Engineer - 2 Openings

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software
Must Haves:
Engine Bleed air design experience
Part 23/25 aircraft experience
Catia V5 3D/2D experience
Degree preferred


The Structures Company is an AA/EOE.
 
Job Number: 369
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Conformal Coating Assembler / 2nd Shift - no clearance FL

Description:
167469 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3120-1
Max Pay Rate: $18.00/hr
Start Date: 2/17/2020
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Conformal Coating Assembler
Under minimal supervision, Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds.
Responsible for providing protection for a variety of circuit boards through the use of coatings, adhesives, potting, and thermal compounds for the encapsulation (protective enclosure) of assemblies.

Roles and Responsibilities
Reports to Supervisor.
Essential Role and Responsibilities:
• Ability to read and interprets prints, labeling diagrams and mixing ratios.
• Operate several different types of dispensing and coating machines to meet customer specifications.
• Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting.
• Inspect assemblies to ensure proper coating coverage.
• Maintain the coating and dispensing machines to ensure proper operating condition.
• Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality.
• Transport racks of circuit boards from one destination to another to continue the manufacturing process.
• Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation.
• Perform general housekeeping duties to provide a safe and clean working environment at all times.
• Knowledge of various materials used.
• Must complete applicable Specific Function Training courses.
• Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements.
• Encapsulation of discrete assemblies.
• Replenishes chemicals, solvents, compounds, process fluids as required, including dispensing into secondary containers and chemical cleaning.
• Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes.
• Advances or retrieves product, material, and tools in house and from local suppliers for self and others.

Qualifications and Education Requirements
Mandatory:
• A positive attitude and dependability is a must for this position.
• Must have Mechanical/assembly skills and be able to develop scope skills.
• Ability to read prints/instructions.
• Good dexterity and experience working with small pieces of hardware.
• Must have an attention to detail.
• Ability to precisely mix and apply chemicals.

Qty 3 positions
Prefers candidates with artistic background.
This is for 2nd shift
 
Job Number: LMRMS-3120-1
Job Location: Clearwater, FL
Rate: 18/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Knowledge with placard creation/installation and/or seat engineering/installation highly preferred.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis, and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11964
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design / Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
2. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
3. Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations.
4. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
5. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
6. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
7. Design Engineer will be required to liaison with the shop on engineering issues.
8. Design assignments include but are not limited to: Item Installation Analysis, Similarity Analysis , and Configuration Analysis.
9. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 11965
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design / Mechanical Engineer - Completions Aircraft Interiors

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
Examples include custom commodities such as interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, entertainment equipment installations, placards and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
Design Engineer will be required to liaison with the shop on engineering issues.
Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 148594
Job Location: Savannah, GA
Rate: $55/hr to $58/hr
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Wing and Engine Anti-Ice

Description:
General Summary:
The Contingent Designer Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
2. Prepare 3D installation arid detail models of the Wing and Engine Anti-ice Systems.
3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.


Education, Work Experience, Certification and/or Licensure:
5. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.
Must Haves:
Aircraft anti-ice design experience
Part 23/25 aircraft experience
Catia V5 3D/2D experience
Degree preferred


The Structures Company is an AA/EOE.
 
Job Number: 370
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Specialist

Description:
We have an Excellent Contract position for a Design Specialist to join a leading Company located in the York, PA area.
** Position requires U.S Citizenship.

Job Responsibilities:
Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity.
Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications.
Ensures designs are free of layout process defects.
May assist engineers with defining design standards and configurations.
Applies Computer-Aided Design (CAD-UG NX11) methodologies, theories, and techniques.
Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions.
Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
Develops innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs by utilizing sound design principles and practices.
Prepares moderately complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of component(s) or a portion of a functional system to satisfy system and integration requirements within cost and producibility constraints.
Prepares drawing packages to military or equivalent ASME standards.
Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures the accuracy of calculations and dimensions.
Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates the integration of equipment.
Performs and documents technical calculations such as design evaluations, tolerance studies, mass and section properties, static and dynamic loading.
Identifies assembly interference, design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design.
Interfaces with various internal customers to solve moderately complex technical problems.
May interface with external customers to solve moderately complex technical problems.

Experience Required:
Associate Degree with an emphasis in engineering drafting/design or an equivalent combination of training and experience; plus, a minimum of six additional years drafting and design experience, including a minimum of two years design work.
Must be skilled in the creation of model-centric models and drawings utilizing UG NX11. Creo 4 is a plus.

Experience Preferred:
Experience with relevant applications in a defense environment.
 
Job Number: 39663
Job Location: York, PA
Rate: 38.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Engineer - Mechanical Interiors

Description:
Structural/Mechanical Engineering group for Completions Engineering. Responsibilities primarily involve modeling and drafting of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft using Catia V5 and AutoCad. Responsibilities may also include creating interior design drawings and documentation in support of aircraft sales. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The technical designer will also be responsible for creating models and drawings installing the aforementioned commodities into the aircraft. Designers will create data consistent with industry accepted drafting practices and company standards. Assignments are executed under the direction of a senior engineer, Lead engineer, or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head.

Candidate must have a thorough working knowledge of AutoCad and Catia V5. Experience with Smarteam or Enovia is preferred.
 
Job Number: 20-149926
Job Location: WI
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Capitol Logic & Harness XC

Description:
Unique Skills:
1. Mentor Graphics Capitol Logic and Harness XC experience required.
2. Catia V5 experience preferred.
3. 14 CFR 25 Subpart H - EWIS based design experience required.
4. Completions electrical system design experience preferred.
5. Part 25 Certification experience for cabin interiors preferred.
6. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
7. Experience with power distribution, lighting, switching, and harness routing required.
8. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
9. Familiarity with aircraft STC procedures preferred.
10. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.
11. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11995
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Unique Skills:

Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 131981
Job Location: Savannah,, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.
 
Job Number: 20-150866
Job Location: Savannah, GA
Per Diem: Split
Overtime: Possible
Duration: $60-$65 per hour
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin communication, security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Catia V5 basic navigation experience.
• Company electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-387
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication, security and entertainment systems.
3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12142
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Location: GA
Rate: $60.60
Per Diem: Possible
Overtime: Possible
Start Date: Long Term
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12014
Job Location: Savannah, GA
Rate: $53.17 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCAD, Capitol Harness &/or Mentor Graphics required.
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 3. Experience with power distribution, lighting, switching, wire sizing and routing.
4. Experience with systems development, layout, logic and wiring diagram creation.
5. Familiarity in mechanical system design.
6. Analyze Electrical designs in 3D models.
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position.

Preferred candidate will have:
1. Catia V5 basic navigation experience.
2. GV, GVI, & GVII electrical system design experience.
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
4. EWIS Certification familiarity & experience preferred.
5. Familiarity with aircraft STC procedures preferred.
6. Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12016
Job Location: Savannah, GA
Rate: $59.52 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-377
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-376
Job Location: Savannah, GA
Rate: $55-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Required Skills:
AutoCad, Capitol Harness &/or Mentorgraphics required
Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
Experience with power distribution, lighting, switching, wire sizing and routing.
Experience with systems development, layout, logic and wiring diagram creation.
Familiarity in mechanical system design.
Analyze Electrical designs in 3D models
Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
Catia V5 basic navigation experience.
GV, GVI, & GVII electrical system design experience.
14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
EWIS Certification familiarity & experience preferred.
Familiarity with aircraft STC procedures preferred.
Experience with electrical systems test plans and reports.


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 148781
Job Location: Savannah, GA
Rate: $59/hr to $65/hr
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Design - Completions

Description:
1) Electrical Harness Installation (EHI) design experience required.
2) Catia V5 experience required.
3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4) 14 CFR 25 Subpart H - EWIS based design experience required.
5) Completions electrical system design experience preferred.
6) Part 25 Certification experience for cabin interiors preferred.
7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8) Experience with power distribution, lighting, switching, and harness routing required.
9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10) Familiarity with aircraft STC procedures preferred.
11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


Education and Experience Requirements:

1.) Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2.) Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-369
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Design Engineer

Description:
Unique Skills:
1. Electrical Harness Installation (EHI) design experience required.
2. Catia V5 experience required.
3. Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4. 14 CFR 25 Subpart H - EWIS based design experience required.
5. Completions electrical system design experience preferred.
6. Part 25 Certification experience for cabin interiors preferred.
7. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8. Experience with power distribution, lighting, switching, and harness routing required.
9. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10. Familiarity with aircraft STC procedures preferred.
11. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11994
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Design Engineer-Completions

Description:
1) Electrical Harness Installation (EHI) design experience required.
2) Catia V5 experience required.
3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4) 14 CFR 25 Subpart H - EWIS based design experience required. 5) Completions electrical system design experience preferred. 6) Part 25 Certification experience for cabin interiors preferred.
7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8) Experience with power distribution, lighting, switching, and harness routing required.
9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10) Familiarity with aircraft STC procedures preferred. 11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 149203
Job Location: Savannah, GA
Rate: $58/hr to $63/hr
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrocincs Packaing Design Engineer

Description:
Global defense contractor in MD is looking for a seasoned engineer for a long term contract assignment.

Basic Qualifications:
• Minimum 7+ years' experience in microelectronics packaging design or related field (which may include technologies such as organic PWBs, multilayer ceramic packages, flip chip, 2.5D/3D packaging, MCM, QFN, IMA, etc.)
• Proficient with NX CAD software
• Proficient with design and routing of high density Printed Wiring Boards (PWBs)
• Able to communicate and collaborate effectively as a member of an integrated product design team
• Bachelor's degree in mechanical engineering or related field
• US Citizen, with ability to obtain a Secret clearance

Desired Qualifications:
• Proficient with Mentor Expedition software
• Familiar with heat transfer methodologies for electronics, and thermal analysis tools
• Familiar with manufacturing and test methodologies of microelectronics assemblies and PWBs
• Master's degree in mechanical engineering or related field
 
Job Number: 5867
Job Location: Baltimore, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HEPCO INC
Attention: Tom Lee
Address: 160 PEHLE AVE STE 202
City, State: SADDLE BROOK, NJ 07663-5227
Phone: 201/843-4400
800 Phone: 800/656-0099
Fax Phone: 201/843-0025
Website: www.hepcoinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer NY

Description:
Job title: Electronic Manufacturing Engineer
Request number: 6309
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 60
Start Date: 02/17/2020
Tentative End Date: 07/20/2020

Job Description
Function:
1. The Electronics Process Engineer is a focal point for resolving all questions/problems concerning the manufacture and assembly of electronics development and production hardware. This includes concurrent engineering of circuit board and controller design, and the processes / equipment to manufacture Circuit Card Assemblies, Cable Assemblies and Controllers.
2. The incumbent initiates changes and deviations to the design or specification requirements.
3. They are the primary contact for customers, vendors, and internal Moog personnel on all technical processing problems and questions.
4. The incumbent frequently functions in the manner of a program manager, on technical problems, coordinating Moog resources for the solution of a problem and communicating timely information to the affected groups within Moog and to the customer/supplier levels.
5. The incumbent provides Moog SDG Cross facility support
6. The incumbent provides Electronics Contract Manufacturer support (for Electronics Buy programs)

Essential job functions:
1. Provide production assembly/test instructions, training and monitoring to maintain production.
2. Evaluate, request, and implement equipment to meet production requirements.
3. Assure and maintain design integrity, producibility and quality in production products.
4. Provide process engineering support as required to other Moog departments to maintain and improve quality, schedule, and cost objectives.
5. Complete electronics manufacturing readiness deliverables: Provide Routings, Op sheets, Assembly Worksheets, machine programming, solder profiling, tooling and fixturing to A&T Operations
6. Provide on demand support to A&T Operations as required from kit pull thru stock
7. Address stop work issues in a timely fashion– address non-standard work (e-HR and NC), communicating timely information to the affected groups within Moog and to the customer/supplier levels.
8. Prepare and present electronics manufacturing information at PDR, CDR and MRR

Required skills:
• Bachelor of Science Degree in Electrical, Mechanical, Chemical or Industrial Engineering + one year relevant technical experience
• Alternately, a Bachelor of Technology Degree in Engineering + five years of relevant technical experience
• Demonstrated strong technical written and verbal communication skills
• Knowledge in areas of Root Cause / Corrective Action, LEAN and Project Planning
• Must be a US citizen, capable of obtaining a government security clearance
• Certification to J-STD-001, IPC-A-610 and NASA 8739 is desirable

Scope:
Electronics manufacturing methods – Surface Mount Technology, Plated Through Hole Technology, soldering, cleaning, polymeric applications, cable assembly, box build, rework and repair
Machine Programming utilizing Aegis CircuitCam software tool
Electronics Processing capital planning, specifications, acquisition and qualification
Electronics DFX – Review designs throughout the design cycle in regards to Design For Manufacturability, Design For Assembly, Design For Test and Design For Cost
Electronics assembly/processing materials and chemicals expertise
Education:

Other Requirements
****Pre-Screen Questions Required w/ Submittals****

Pre-Screen Questions – Electronic Manufacturing Engineer
1. What experience do you have where class 3 aerospace electronics are built and tested
2. What electronics industry standard certifications do you currently have or did have – IPC J-STD-001, Space Addendum, IPC-WHMA-A-620, IPC-A-610, IPC-A-600, NASA 8739, WHMA
3. What electronics assembly and/or test machine programming applications have you used
4. What automated soldering process development experience do you have
5. Have you written electronics assembly and/or test work instructions


Position needed for 4-6 months at this point
 
Job Number: MB-6309
Job Location: East Aurora, NY
Rate: 60/hr max
Per Diem: pd split possible
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician FL

Description:
167653 Job Title: Electronics Technician

Work Site Address: Orlando, FL 32819
Job Number: 3325-1
Max Pay Rate: $27.00/hr
Start Date: 3/9/2020
End Date: 3/7/2021
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
An AA in Electrical or Electronics Engineering is highly preferred.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Testing Yes 8 2 - 4 Years
Soft Skills Ability to meet deadlines Yes 6 2 - 4 Years
Technical Skills ATP Yes 7 2 - 4 Years
Technical Skills Electrical Testing Yes 7 2 - 4 Years
Technical Skills Electronic Testing Yes 7 2 - 4 Years
Technical Skills General Assembly Test System (GATS) software Yes 5 2 - 4 Years
Technical Skills User Acceptance Testing Yes 5 2 - 4 Years

Qty 1 position
Pay rate range is $20-$27
 
Job Number: LMRMS-3325-1
Job Location: Orlando, FL
Rate: 20-27/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician MD

Description:
167627 Job Title: Electronics Technician

Work Site Address: Baltimore, MD 21220
Job Number: 3304-1
Max Pay Rate: $35.00/hr
Start Date: 2/25/2020
End Date: 7/3/2020
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
AA in Electrical or Electronics Engineering is highly preferred.

Skills: Category Name Required Importance Experience
Technical Skills IPC-J-STD Yes 1 2 - 4 Years
Technical Skills IPC-A-610 No 3
Technical Skills IPC-WHMA-A-620 No 2

Qty 1 position
 
Job Number: LMRMS-3304-1ATO
Job Location: Baltimore, MD
Rate: 35/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Clearance GA

Description:
2884-1 Embedded S/W Engineer
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 1/29/2020
End Date: 1/19/2021

Job Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $72.00 Hourly
 
Job Number: JE-2884-1S6
Job Location: Marietta, GA
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental Test Lab Technician CA

Description:
Job Title: Environmental Test Lab Technician

Work Site Address: Chatsworth, CA 91311
Job Number: 6319
Max Pay Rate: 25-28.00
Start Date: 02/17/2020
End Date: 08/24/2020
Position Type: Contract

Job Description:
Independently perform qualification tests and acceptance tests.
•Maintain test logbooks, in a neat and organized manner.
•Assemble test setups, both mechanical and electronic.
•Pump down, monitor, and be responsible for the operation of thermal cycling and thermal vacuum chambers. Including the working with liquid nitrogen.
•Assist in maintaining a clean, safe and orderly work environment.

Qualifications and Education Requirements
The Laboratory Technician must have a broad knowledge base spanning from basic electronics and instrumentation, to mechanical systems and thermal vacuum environments. You must also have practical hands on ability to solder, make connectors as well as the ability to use mechanical tools associated with this job.

• 2- 5 years’ experience in electro mechanical testing.

• A working knowledge of basic electronics.

• Ability to utilize power supplies, digital volt meters, data loggers, oscilloscopes, strip chart recorders, counters, and stepper motor controllers.

• Knowledge of transducers, such torque transducers, encoders and thermal couples.

• Ability to operate thermal cycling chambers and thermal vacuum chambers.

• Mechanical ability to assemble mechanical test setups

The Space and Defense Group in Chatsworth is looking for a Lab Technician. Client produces mechanisms for spacecraft motion control with design and flight heritage expanding over 45 years. With origins from historic programs such as Apollo and Pioneer to present-day satellite programs, brings heritage-based solutions to spacecraft mechanisms technology. The spacecraft mechanisms facility in Chatsworth, California includes a fully-integrated engineering/design, manufacturing and test capability. Moog spacecraft products are flexible to meet customer requirements for a wide breadth of applications ranging from commercial to government flight programs
 
Job Number: MB-6319
Job Location: Chatsworth, CA
Rate: 28/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: $40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations / URGENT - Clearance MD

Description:
Flight Operations
Work Location: Patuxent River, MD - RMS
Status: Open

Qty: 5
Desired Start Date: 12/9/2019
End Date: 2/26/2021

Job Description:
The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

Basic Qualifications
-Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.

CNE Work Location: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $74.00 Hourly
 
Job Number: LMRMS-2699-1S
Job Location: Patuxent River, MD
Rate: 74/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail

Education and Experience Requirements:
Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Flight Test Engineer Certification may offset one year of experience requirement.


Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering
 
Job Number: 148303
Job Location: Savannah, GA
Rate: $55/hr to $70
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Unique Skills:
• Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
• Experience executing test procedures onboard experimental fixed wing test aircraft
• Experience performing analysis of post flight data to determine pass/fail

Essential Functions:
• Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
• Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
• Work with engineering and test pilots to define test points that are conducted on test aircraft
• Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
• Definition of the aircraft configuration to support the on aircraft test
• Tracks test points and updates pass/fail/repeat status
• Supports on aircraft ground/flight testing as required.
• Provides the judgment on acceptable test data during or post flight
• Processing of data following a test flight to document test results
• Development of flight test reports to show compliance with test requirements
• Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
• Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
• Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
• Conducts flight test brief with flight ops and engineering
• Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
• Generates and transmits post flight test summary
• Conducts debrief of test mission with test crew and engineering

Education and Experience Requirements:
• Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
 
Job Number: 24-378
Job Location: Savannah, GA
Rate: $55-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience executing test procedures onboard experimental fixed wing test aircraft.
3. Experience performing analysis of post flight data to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
4. Flight Test Engineer Certification may offset one year of experience requirement.

Position Purpose:
1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
5. Definition of the aircraft configuration to support the on aircraft test.
6. Tracks test points and updates pass/fail/repeat status.
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight.
9. Processing of data following a test flight to document test results.
10. Development of flight test reports to show compliance with test requirements.
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
14. Conducts flight test brief with flight ops and engineering.
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
16. Generates and transmits post flight test summary.
17. Conducts debrief of test mission with test crew and engineering.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Perform other duties as assigned.

Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12036
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector - no clearance FL

Description:
167429 Inspector
Work Location: Clearwater, FL
Status: Open
Qty: 1
Desired Start Date: 2/3/2020
End Date: 1/15/2021

Job Description:
Uses work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards. May monitor and verify quality in accordance with statistical process or other control procedures. Communicates effectively with assemblers, engineers, and management when resolving quality issues.

Candidate has a strong background in the manufacturing process of electro-mechanical printed circuit boards.
-Has the willingness and ability to perform assembly tasks related to assigned inspection areas as needed.
-Experience with soldered connections on Printed Circuit Card assemblies using IPC-A-610 and J-STD-001 standards.
-Detail-oriented and proficient at interpreting drawings, diagrams, parts lists, IPC manuals, revision control, reference documents and work instructions.
-A team player with strong verbal and written communication skills. Interfaces effectively and diplomatically with assemblers, test technicians, engineers, customers and management when resolving quality issues.
-Proficient with Personal Computers.
-No Degree Required

PAY RATES: $18-$24/HR.

Region: Clearwater, FL
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS

Skills:
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills IPC-J-STD Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years
Technical Skills Visual Inspection Yes 1 2 - 4 Years
 
Job Number: LMRMS-3047-1
Job Location: Clearwater, FL
Rate: 18-24/hr DOE
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspector / 2nd Shift - no clearance FL

Description:
167428 Job Title: Inspector

Work Site Address: Clearwater, FL 34677
Job Number: 3049-1
Max Pay Rate:
Start Date: 2/3/2020
End Date: 1/15/2021
Position Type: Contract
Pay Rate: 19-25/hr

Job Summary:
Uses work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards.

May monitor and verify quality in accordance with statistical process or other control procedures. Communicates effectively with assemblers, engineers, and management when resolving quality issues.

Qualifications and Education Requirements
Candidate has a strong background in the manufacturing process of electro-mechanical printed circuit boards.
-Has the willingness and ability to perform assembly tasks related to assigned inspection areas as needed.
-Experience with soldered connections on Printed Circuit Card assemblies using IPC-A-610 and J-STD-001 standards.
-Detail-oriented and proficient at interpreting drawings, diagrams, parts lists, IPC manuals, revision control, reference documents and work instructions.
-A team player with strong verbal and written communication skills. Interfaces effectively and diplomatically with assemblers, test technicians, engineers, customers and management when resolving quality issues.
-Proficient with Personal Computers.
-No Degree Required

Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 No 1
Technical Skills IPC-J-STD No 1
Technical Skills Surface Mount Technology No 1
Technical Skills Visual Inspection No 1

Qty 2 positions
This is for 2nd shift
 
Job Number: LMRMS-3049-1
Job Location: Clearwater, FL
Rate: 19-25/hr DOE
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
• Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements
• Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-390
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Unique Skills:
As part of the Completions Engineering Mechanical Definition Team:
• Define and create Build Lists of interior components for aircraft
• Evaluate customization requests for engineering and manufacturing feasibility
• Analyze models to determine asset re-use or new custom engineering requirements
• Support evaluation and determination of certification strategy of aircraft
• Experience in designing aircraft Interior Furnishings preferred
• CATIA V5 / SmarTeam preferred

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-383
Job Location: Savannah, GA
Rate: $60-$65/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
• Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Knowledge with placard creation/installation and/or seat engineering/installation highly preferred
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $55-$58/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Assembly Technicians (2nd shift)

Description:
The position responsibilities include:
• Major and minor assembly of landing gear components, assemblies and sub-assemblies
• Ensuring all required assembly tasks are completed in compliance with federal regulations, customer guidelines, and company policies
• Interfacing with stakeholders (i.e. engineering, planning, inspection and customer) in a professional manner
• Adhering to predetermined shelf life procedures
• Complying with hazardous material disposal procedures
• Understanding and modeling safe work procedures
• Responsible for understanding, interpreting and training employees on the procedures as outlined in work instructions
• Championing implementation of Continuous Improvement methodologies to reduce cost, improve quality and ensure on-time delivery
• Deploying use of Lean Manufacturing
• May require off-site work at a customer facility which may require the work to be performed outdoors
• May require off-shift work
• Demonstrating awareness and understanding of the EHS policy, procedures and management system.
• Complying with all EH&S policies and procedures.

Education / Certifications
High School Diploma or GED

Experience/Qualifications
• Minimum of one year of mechanical assembly experience
• Must be able to read and interpret manufacturing blueprints and other pertinent documents used for assembly of landing gear (i.e. mfg. specifications, quality documentation etc.)
• Ability to communicate with all levels
• Assembler must be able to work with precision tools and large mechanical equipment.
• Must be able to verify US person status.
 
Job Number: 2010110343
Job Location: Ft Worth, TX
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Hardware Engineer

Description:
A Lead Hardware Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for understanding and performing design and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

Lead Hardware Engineer Job duties:

* IPT Lead for a small team (3-5 people) of mechanical and electrical engineers responsible for hardware design, development, documentation, and life cycle support.
* Leads development of strategic tasks or small to mid-size projects by applying engineering and organizational knowledge and expertise to achieve technical goals.
* Monitors the project from initiation through delivery including planning and directing schedules and monitoring budget/spending.
* Responsible for the completion of assigned engineering tasks or mid-size projects within budgetary and scheduling guidelines.
* Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering tasks or small projects within area of assigned responsibility.

Qualifications:

* Develop and review engineering drawings and technical documentations. Proficient with using AutoCAD Inventor drawing and modeling software. Experience with hardware cabinets, enclosure, and structural design used in undersea platforms (i.e. submarines). Understand installation of equipment for thermal and mechanical stress/safety considerations. Good understanding and working knowledge of electrical hardware design and components.
* Strong experience with environmental qualification testing of hardware and system components, including EQT test development and execution.
* Strong experience and understanding with manufacturing and production processes, procedures, and standards (e.g. IPC620, ANSI, EIA, etc.). Support the build, inspection, and qualification of components, equipment, and assemblies.
* Solid understanding, experience, and working knowledge of the AN/BQQ-10 SONAR system.
* Program schedule and cost management and reporting. Understanding of EVMS is a plus.

If you are interested in this Lead Hardware Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298354
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Stress Engineers - Commercial or Military Aircraft

Description:
We are looking for Stress Analysts / Stress Engineers who have a background doing Liaison support on structural repair/maintenance of in-service aircraft structures and components.
MUST BE US PERSONS
Must have:
BS degree
Airframe Structural Analysis experience
Extensive Classical Analysis background required

Develops and provides engineering solutions for the overhaul and repair of large transport aircraft structural components, requiring a sound knowledge of the principles, theories, and concepts that are consistent with Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) regulations. Technical foundation to perform approvals of single and multi-use repair packages, and manage product center workflow and schedules,. Manage projects and special assignments with little to no supervision. May function as a team lead for less experienced engineers.

Essential Functions and Key Responsibilities:

Reviews damage reports to develop repair schemes, authors work instructions, and performs the stress analysis and substantiation supporting the repair with no supervision. Repair development and substantiation will include a variety of analysis methods and require an established knowledge of mechanically fastened metallic structure, adhesively bonded metallic structure, composite structure, welding, and brazing. Developed repairs must be substantiated to meet or exceed the original design certification requirements.

Established knowledge of, and ability to apply repair analysis techniques such as Boeing Structures I and II, ABARIS/Laminate Plate Theory, Bruhn, Flabel, ETC. Develops and substantiates complex repair schemes with no supervision.

Working knowledge of FAA and EASA regulations, AD’s, NPRM’s, AC’s, AMC’s, SDR’s, EWIS, etc. Other aviation authority knowledge such as CAAC/JAA/JCAB is a plus.

Performs technical review and approval of less experienced engineer’s repair packages.

Mentoring less experienced engineers, co-ops, and interns and may be responsible leading direct reports.

Manages projects and/or product centers with little to no supervision.

Develop and/or peer review multi-use repair specifications, drawings, and engineering reports.

Review and interpret technical documents such as Drawings, Structural Repair Manuals (SRM’s), Component Maintenance Manuals (CMM’s), Illustrated Parts Lists (IPL’s/IPC’s), Material Specifications, Process Specifications, etc.

Develop and/or approve repair data packages and obtain FAA approvals through internal and external FAA Designated Engineering Representatives (DER’s).

Communicate and interact with Airbus and Boeing engineering for repair development support, as well as coordinate customer engineering approvals of developed repair schemes.

Troubleshoot failure modes and interact with shop mechanics to develop cost effective repairs that are feasible to accomplish in a timely manner that supports production schedule.

Above average verbal and written skills, ability to tailor communication to technical and non-technical audiences.

The Structures Company is an AA/EOE.
 
Job Location: OK
Rate: ***DOE***
Duration: ***DIRECT POSITION***
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for Wire Design Engineer in OK, MO states

Description:
Multiple Positions Below

1. Wire Design & Install Engr 5

Location: Hazelwood, MO
Duration: 5+ Months

Description:
The QF-16 team is responsible for the design and installation of Drone Peculiar Equipment (DPE) to convert retired USAF F-16's into Full Scale Aerial Targets. This role leads all wire harness design activities from schematic wire diagram definition through cable/harness definition. This position supports fielded aircraft as well as two active production lines. The candidate will apply their electrical design background to troubleshoot issues with fielded aircraft, provide technical guidance to supplier management, and provide design support to the production lines. The primary role for this position is to develop the QF-16 electrical design baseline in accordance with new business opportunities.

Typical Education/Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

Primary responsibilities:
- Develops and maintains cable/wire harness detail and assembly designs.
- Analyzes results and performs design reviews.
- Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
- Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests).
- Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Develops basic statements of work.
- Participates in technical review of supplier capabilities to facilitate source selection.
- Analyzes functional and physical input to assure development of complete integrated design.

Basic Qualifications:
- This position requires the ability to obtain a US Security Clearance.
- 10+ years of experience designing the fabrication of wire harness/cables.
- 5+ years of experience in a leadership role, leading teams or projects to successful completion.

Preferred Qualifications:
- Familiarity with Teamcenter Engineering.
- Ability to interrogate models in Unigraphics (NX).
- Experience communicating with customers and suppliers.
- Experience with aircraft modification design.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General





2. Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other Job Responsibilities May Include:
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies.
- Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Basic Qualifications (Required Skills and Experience):
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Skill Code: 652-Wiring Design





3. Wire Design & Install Engr (Level 3, 4, 5)

Location: Tukwila, WA
Duration: 6+ Months

Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- Designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Hazelwood, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
M&P Engineer

Description:
Description
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledge of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-90/hr
Per Diem: Yes
Overtime: Tes
Duration: Long Term
Start Date: ASAP
Input Date: 05/03/2022
Last Updated: 02/28/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimberly Wade
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
 
Job Location: Tulsa, OK
Rate: $60/hr to $68/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
 
Job Number: 138961
Job Location: Tulsa, OK
Rate: $64/hr to $68/hr
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
- Typically a 40 hr work week, with some week/weekend OT a possibility.
- Position is full-time at a supplier in Tulsa, OK

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Location: Tulsa, OK
Rate: Open
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Vivek Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Structures Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
MRB Structures Engineer
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional weekends expected. Transition to 2nd shift may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-398
Job Location: Savannah, GA
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Structures Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
MRB Structures Engineer
• Bachelors degree in aerospace or mechanical engineering.
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.
• Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-399
Job Location: Tulsa, OK
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Systems Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
MRB Systems Engineer
• Bachelors degree in aerospace or mechanical engineering.
• Minimum 7 years Systems MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions related to composite nacelle systems.
• Aircraft MRB Systems experience should include: ECS installations, Auxiliary mechanism verifications, assistance with movable component installation and rigging, Acceptance Test Procedure (ATP) deviations and resolution, installation and operational verification of nacelle components ( fixed cowl, hinged cowl doors, TR,etc.).
• Experience should be in a Production and/or schedule-driven environment.
• Strong written/verbal communication and interpersonal skills. Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.
• Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-397
Job Location: Tulsa, OK
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist / 2nd shift - no clearance MD

Description:
167508 Job Title: Machinist

Work Site Address: Baltimore, MD 21220
Job Number: 3157-1
Max Pay Rate: $28.00/hr
Start Date: 2/10/2020
End Date: 6/11/2020
Position Type: Contract

Job Summary:
Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Typically requires completion of a formal apprenticeship or equivalent training and experience.

Skills: Category Name Required Importance Experience
Areas of Expertise Computerized Numerical Control (CNC) programming Yes 1 2 - 4 Years
Software Skills Computerized Numerical Control (CNC) Yes 2 2 - 4 Years
Technical Skills Basic machine shop equipment No 1

Qty 1 position
Experience Must be Clearly listed on Resume
2nd shift
 
Job Number: JEG-3157-1
Job Location: Baltimore, MD
Rate: 28/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist III

Description:
We are currently seeking an experienced Machinist to fill a role with an international manufacturing company in Chesapeake, VA. This position will require setting up, adjusting and operating machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance. Interested candidates should have a exposure to technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning, and/or multitasking machines as as well as expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.

Responsibilities of the Machinist III
Set up, adjust and operate machine tools in order to perform precision machining operations while holding close tolerance dimensions with minimal assistance.
Read and interpret blueprints in both imperial and metric standards.
Calculate dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings.
Test cut / dry run CNC programs prior to production runs.
Follow Process Sheets, Process Maps, Standard Operating Procedures and Poka-Yoke systems implemented by the Manufacturing Engineering and Shop management to generate predetermined production volumes, while ensuring best quality and lead times.
Ensure adherence to routed hours and target efficiencies for production.
Provide feedback on equipment, tooling, jigs, fixtures, and work holding solutions to reduce setup times and eliminate rework and recommend any modifications for improved efficiency in assigned areas.
Work closely with Machine shop supervisors, quality assurance and maintenance personnel to proactively prevent problems with machining cells and tooling/fixtures as well as provide ways to improve efficiency, cost, layout and safety.
Machine prototype parts on request.
Ensure all manufacturing safety and regulatory policies and procedures are implemented and maintained at all times.
Actively champion and maintain a culture of 5S (Sort, Set and Order, Shine, Standardize and Sustain) in the machine shop.
Provide training for other operators when required.
Be an active resource in time studies to analyze processes and validate recommended process changes.


Requirements
15 years of experience operating a mix of manual, semi-automatic, and CNC machine tools in a fast paced work environment including:
At least 5 years of manual machining experience.
At least 10 years of CNC machining experience.
At least 5 years of experience in high volume – low mix production.
At least 5 years of experience in low volume – high mix production
At least 2 years of experience in multi-pallet machines, pallet controller systems, 4+Axis/5-Sided machining, or bar-fed lathes desired but not essential.
Expertise and experience in using common measuring instruments (micrometers, calipers, height/depth/bore gauges,) and tool presetters.
Expertise in reading and interpreting complex drawings and blueprints in both imperial and metric standards.
Expertise in calculating dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings/standards.
Expertise and experience in measuring perpendicularity, parallelism, concentricity and run out in micron or sub-micron level resolutions on manufactured components.
Proficiency in reading CNC programs, and ability to edit programs in order to make corrections and/or improve efficiency.
Proficiency in setup, operation and basic maintenance of multi-axis CNC lathes; mills – horizontal and vertical - including multipallet machining centers; grinders; boring machines; broaches; Gear generation and testing equipment.
Proficiency in setup, operation and basic maintenance of Manual lathes, mills, grinders, tool grinders, drills, broaches, shears, gear hobber, band saw.
Experience with technologies such as 4/5 Axis machining, 5-Sided machining, Bar-fed turning and/or multitasking machines.
Ability to set up, adjust and operate all machine tools in order to perform precision machining operations while holding very close tolerances, and with minimal assistance.
Good understanding of Tooling/Jig and Fixture design for machining operations.
Ability to read and understand complex Engineering drawings/Blueprints.
Excellent grasp of mathematics (including geometry and trigonometry), and good understanding of mechanical systems.
Proven competency in calculating complex dimensions and tight tolerances.
Good understanding of Metallurgy.
Complete understanding of common gauges and measuring instruments (gauge blocks, micrometers, calipers, height gauge, depth gauge, bore gauges, Mahr gages, etc.).
Experience in accurately diagnosing tool wear by visual inspection or by listening to the process, and in making necessary adjustments to control the process.
Basic understanding of DNC control for CNC programs and Machine monitoring systems desired but not essential.
Ability to setup and operate multiple CNC machine tools simultaneously (for proven processes).
Commitment to Lean production values such as Pull processing, Perfect first-time quality, Single piece flow, Waste minimization, Continuous improvement and Visual Control.
Good initiative, work ethics and ability to work individually and in team settings.
Strong personal ethics.
Excellent conflict resolution skills.
Strong communication skills.
 
Job Location: Chesapeake, VA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturer Engineer III

Description:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Essential Functions:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.
 
Job Number: 24-391
Job Location: Savannah, GA
Rate: $62.50
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturer Engineer III

Description:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Essential Functions:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.
 
Job Number: 24-391
Job Location: Savannah, GA
Rate: $62.50
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Unique Skills:

SAP, Solumina, Catia, SmarTeam, process methods, manufacturing engineering

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.
 
Job Number: 132006
Job Location: Savannah,, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

Unique Skills:
SAP, Solumina, Catia, SmarTeam, process methods, manufacturing engineering

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12196
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
SAP, Solumina, Catia, SmarTeam, process methods, manufacturing engineering

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-396
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

Unique Skills:
Previous Gulfstream experience working with live aircraft (G500 and G600 preferred).

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12160
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Shift: 2nd Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Previous Gulfstream experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 12129
Job Location: Savannah, GA
Rate: $51.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Previous experience with Solumina, Catia, SmarTeam, SAP preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 7. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. 8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. 9. Keep current on state-of-the-art manufacturing developments. 10. Incorporate Lean Manufacturing Methodology into existing and future processes. 11. Develop business case and present to management for process improvement approval. 12. Assume the duties of the ME Group Head in his/her absence. 13. Assign and review work of subordinate personnel. 14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. 15. Lead/coordinate the implementation of projects between multiple orgs. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions: 1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. 2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. 5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. 6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 12145
Job Location: Savannah, GA
Rate: $62.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer, Level 3

Description:
Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Education:
Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 12203
Job Location: Camden, AR
Rate: $50.00 - $53.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer- Job ID-40211

Description:
We have an Excellent Contract position for a Manufacturing Engineer to join a leading Company located in the Camden, AR area.
Job Responsibilities:
Responsible for design, fabrication, modification, analysis, and evaluation of manufacturing operations, processes, procedures, and production layouts for the support of manufacturing/assembly operations for rocket engine components and or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.
Experience designing, planning of layout component fabrication, and assembly.
Experience with material handling, planning of sequence of operations, and specification procedures.
The scope of responsibility will be for several mechanical components or as a process engineer supporting the new and developing process.

Basic Hiring Criteria:
Bachelor's degree in an appropriate discipline and five (5) years of related experience or an equivalent combination of education and experience.
 
Job Number: 40211
Job Location: Camden, AR
Rate: $50.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Plant Facility Design Engineer

Description:
*This is a 1 year, full time, contract position located in Kingsport, TN*



We are seeking a PLC/Controls or Manufacturing Plant Design Engineer who will be assisting us in designing a chemical manufacturing plant. Part of this work will involve analyzing existing plant infrastructure and recommend upgrade plans and strategies.



Candidate will be responsible for electrical and control systems design and design review for transformers, motor control centers, lighting, bonding and grounding, lightning protection, instrumentation, networks, fire alarm systems, PLC control panels, and schematic wiring drawings



Duties will consist of interfacing with designer/drafters, help develop instrument and electrical equipment specification including sizing and analysis of medium/low voltage equipment and wiring, abet with PHA/HAZOP studies, Level of Protection Analysis (LOPA), National Electrical Code, and Safety Instrumented Systems including HAZMAT for flammable vapors.



Required:
*10 years’ experience in electro-mechanical design of manufacturing plants, particularly petrochemical or similar chemical plants
*Experience developing instrument and valve specifications
*Background in design of PLC based control systems
*Familiar with hazardous environment National Electrical Codes and related Safety Systems Design, MSDSs
*Engineering Degree, BSEE preferred



Pluses:

*Strong AutoCAD Plant 3D or P&ID experience

*PE license
 
Job Number: 231
Job Location: Kingsport, TN
Rate: $64
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
Summary:
As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

On any given day you might:
• Support building and lead the Materials and Processes team for the aircraft development
• Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
• Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
• Perform trade studies, write proposals, and support new business development plans

We're looking for someone who has:
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
• 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 3+ years of experience leading technical resources and team
• Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
• Knowledge of composite certification and structural bonding requirements for Part 25 preferred
• In-depth and current knowledge of Part 25 regulatory requirements
• Demonstrated success in dealing and influencing internal and external stakeholders
• Experience in engineering support of aircraft production line activities is desirable
• Strong decision making and communication skills
• Excellent problem-solving skills across multi-disciplinary skill sets
• Experience in a global environment working with customers and suppliers

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-038
Job Location: Reno, NV
Rate: $75-$95/hr
Per Diem: YES
Overtime: Possible
Duration: 1+Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanica Engineer/Designer - Interiors/Cabin Completions

Description:
Unique Skills:

Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering: -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. - Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. -Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule. Preferred Skills: - Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements -Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
 
Job Number: 131980
Job Location: Savannah,, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler

Description:
Nesco Resource has a great opportunity for a Mechanical Assembler for a prominent Manufacturer in the Danbury CT area. The individual must be a self starter with an aptitude for attention to detail. Must have good hand tool as well as power tool experience and some wiring skills and welding skills.



Hours: Monday - Friday 7:00 am to 3:00 pm

Required: Steel toe or composite shoes

Pay Rate: $20/hr depending on experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 20-04016
Job Location: Danbury, CT
Rate: 24.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-30 00:00:00.0
Start Date: 2020-01-31 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rebecca Seidel
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Design Engineer.

Position Profile: Under limited direction, has technical ownership of processes critical to manufacturing aerospace hardware specifically related to isothermal while supporting to achieve established goals and financial targets.



ESSENTIAL DUTIES AND RESPONSIBILITIES:

This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

Use modeling tools to design forging and heat treatment processes to meet customer requirements

Meet both internal and external design milestones on assigned tasks

Work with new product development, metallurgy and process engineering to develop, modify, and improve the processes associated with the production of forgings in accordance with customer design requirements

Support operations with witnessing of new jobs or jobs needing improvement

Assist operations with training of crews by providing rationale for specific instructions the crews are asked to comply with

Implement effective method to capture lessons learned to minimize future technical issues

Support identification and implementation of new technologies as needed

Perform other work-related duties as assigned by management.



Education Requirements:

Basic Qualifications:

Bachelor's degree in Engineering or Physics and a minimum 3 years of experience in a manufacturing environment

Knowledge of finite element analysis and experience using it to model plastic flow or fluid dynamics is required

AutoCAD or SolidWorks or UniGraphics experience

Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

This position is subject to the International Traffic in Arms Regulation (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.



Preferred Qualifications:

Master's degree in Mechanical or Materials Engineering, or Physics from an accredited institution

Prior experience in Isothermal forging

Experience with DEFORM or STAR-CCM

Problem Solving experience such as DMAIC or 8D

NX-11 experience

Experience in the Aerospace industry

Experience in metal manufacturing, especially using titanium and/or nickel based superalloys.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 20-05106
Job Location: Midway, GA
Rate: 55.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-31 00:00:00.0
Start Date: 2020-03-01 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
1. Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Qualifications:
1. Ten (10+) years mechanical design experience in an aerospace environment.
2. Strong 3D modeling, design and drafting ability.
3. Strong technical communication skills.
4. Specific experience with Solidworks, ANSI Y14.5, MIL-Standards, Aerospace Materials and Processes.
5. Product background in gearboxes, actuators and cable handling machines is preferred.

Education:
1. Bachelor's Degree required.
 
Job Number: 11969
Job Location: Brea, CA
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design/Drafting UG NX 11

Description:
*This is a full time, 6 month contract located in York, PA*



We are recruiting for a Mechanical Designer II who has recent experience in both electrical and structural designing using UG NX 11 (Unigraphics); experience in aerospace/DoD mechanical designing would be helpful, but not mandatory. Candidate will be working on military DoD land armored vehicle systems/structures and parts design.



Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.



Required:
*5 years’ experience, preferably in in military/aerospace, mechanical or electrical design using UG NX 11
*Strong modelling skills
*Experience reading engineering blueprints, schematics.
*AS degree



Pluses:

*Creo experience
*Vehicle designing experience a plus
 
Job Number: 424
Job Location: York, PA
Rate: $50.40
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Five years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 132070
Job Location: Savannah,, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Unique Skills:
1. Five (5) years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures.
2. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or 15 years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12224
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
As part of the Completions Engineering Mechanical Definition Team:
1. Define and create Build Lists of interior components for G500 / G600 aircraft
2. Evaluate customization requests for engineering and manufacturing feasibility
3. Analyze models to determine asset re-use or new custom engineering requirements
4. Support evaluation and determination of certification strategy of aircraft
5. Experience in designing aircraft Interior Furnishings preferred
6. CATIA V5 / Smarteam preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12120
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry Into Service (EIS) team. Design responsibilities primarily involve creating engineering design solutions to issues found in fleet. These solutions will be incorporated in fleet and into new aircraft builds.

Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
- Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
- Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
- Experience preparing and executing test plans.
- Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.
 
Job Number: 149936
Job Location: Savannah, GA
Rate: $70/hr to $79/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry into Service (EIS) team.
2. Design responsibilities primarily involve creating engineering design solutions to issues found in fleet.
3. These solutions will be incorporated in fleet and into new aircraft builds.
4. Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
5. Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
6. Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
7. Experience preparing and executing test plans.
8. Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
9. Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
10. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and Smarteam.
11. Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Thirteen (13) years specific technical discipline or fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.

Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope.
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities.
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge.
4. Leads the development of innovative principles and ideas.
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements.
6. Works under consultative direction; uses independent judgment to accomplish objectives.
7. Develops standards and guides for diverse engineering activities.
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program.
9. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12112
Job Location: Savannah, GA
Rate: $80.10/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Entry into Service

Description:
Position Purpose:
• Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• Design Engineer/Mechanical Engineering or dual discipline Electro/Mechanical for Aircraft Cabin Interiors in Completions Entry Into Service (EIS) team.
• Design responsibilities primarily involve creating engineering design solutions to issues found in fleet.
• These solutions will be incorporated in fleet and into new aircraft builds.
• Examples of design experience should include several of the following commodities: galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, and entertainment equipment installations.
• Design engineer will design installations for commodities along with necessary airframe modifications to meet load requirements of the interior installation.
• Ability to validate designs for form/fit/function to meet design criteria through laboratory testing.
• Experience preparing and executing test plans.
• Comprehensive and proficient researching and analyzing technical data to ensure designs are accurate.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison multiple departments to ensure work is coordinated appropriately.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program

Other Requirements:
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-382
Job Location: Savannah, GA
Rate: $80/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III- Job id 40161

Description:
We have an Excellent Contract position for a Mechanical Engineer to join a leading Company located in the Vista, CA area.(Please add the job id to your response- 40161).
Job Responsibilities:
Design and develop large-scale cargo inspection systems.
Develop and design mechanical assemblies, specify mechanical components, define operational specifications, test and document designs and provide product service support.
Support overall program objectives in executing the definition and details of the development process per schedules, budgets, and technical direction.
Work closely with Engineers and Scientist of other disciplines to assure overall system design and performance is implemented and maintained correctly.
Create and maintain specifications, ensuring documents are well developed, accurate, and consistent.
Ability to organize and prioritize tasks based on guidance and direction from the engineering manager.
Ability to work and communicate effectively in a team environment.

Basic Hiring Criteria:
Bachelor’s degree in a related field.
Minimum 3 years of verifiable related experience.
Hands-on experience in the development and design of electromechanical systems.
Proficient in Engineering Mechanics (Statics and Dynamics), Fluid Mechanics, and Heat Transfer.
Hands-on experience with defining and implementing formal design documentation for mechanical engineering designs, including assembly and detail drawings, BOM’s, 3D CAD modeling.
Training and experience with Solid modeling.
Physical abilities are consistent with normal work in engineering design and development environment.
Excellent interpersonal skills.
Strong oral and written communication skills.
Ability to pass TSA suitability background check.
Must be willing to travel abroad. If travel is necessary, it typically will be 10%.

Desired Qualifications:
History of completing commercial finished products. Knowledge of machining, fabrication, and sheet metal, processes.
Experience developing, executing and reporting engineering tests and results.
Can write reports, business correspondence, and technical procedures.
Large integrated industrial platforms.
Materials and material properties associated with outdoor platforms and electronic enclosures.
Corrosion protection techniques.
Materials finishing processes.
Solidworks or other design/analysis software tools.
Can effectively apply Geometric Dimensioning and Tolerancing (ANSI Y14.5).
 
Job Number: 40161
Job Location: Vista, CA
Rate: $38-$61-DOE
Per Diem: NO
Overtime: YES
Duration: 8 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer/Designer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Aircraft Cabin Interiors Designer/Mechanical Engineer in Completions Engineering:
1. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
2. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
3. Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
4. Experience in reading and understanding Electrical Schematics for cabinetry & component interface or connections.
5. Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
6. Design Engineer will be required to liaison with the shop on engineering issues.
7. Knowledgeable with Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
8. Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Preferred Skills:
1. Experience with Part 25 certification associated with Transport Airplane Cabin Interiors, AC25-17A -Part 135 associated with Flight Sleeping Facilities aircraft requirements
2. Knowledge of Parametric design with the following experience: Automating mechanical design using knowledgeware toolsets in CATIA V5 Using and creating Power Copy, Actions, Reactions, Rules, Knowledge Patterns, and User designed features to tailor custom tasks and designs Enterprise Knowledge Language (EKL) programming language Proficiency with contextually linked design Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or Fifteen (15) years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters and four (4) years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12150
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation. Actively develop engineering product improvements. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
 
Job Number: 20-150232
Job Location: $60-$65.00
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
3. Actively develop engineering product improvements.
4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12095
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
3. Actively develop engineering product improvements.
4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. Ten (10) years in specific technical discipline or 15 years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12094
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
2. Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
3. Actively develop engineering product improvements.
4. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
5. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
6. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
7. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
8. Applicants must be willing to constantly review existing processes and methods for continuous improvement.
9. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
10. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
11. Commodity support to include by not limited to: Seats, Galley, Lavs, Liners, Water System, or Mechanical Systems.

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12096
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-380
Job Location: Savannah, GA
Rate: $60/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-381
Job Location: Savannah, GA
Rate: $65/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Liaison Engineer

Description:
The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
Support operations teams to correct any engineering errors, workmanship / manufacturing issues that arise during the fabrication of aircraft furniture and installation.
Actively develop engineering product improvements.
The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
Applicants must be willing to constantly review existing processes and methods for continuous improvement.
Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
Commodity support to include by not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 150232
Job Location: Savannah, GA
Rate: $65/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Job Description:
1. This position will be responsible for determining mechanical manufacturing methods for hardware and ensuring that the processes are available.
2. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
3. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
4. Must be able to perform cost estimates, work to schedules, and write procedures and policies.
5. Must be able to review drawings and concepts and resolve producibility concerns.
6. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
7. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
8. Must be able work well in an integrated product development/ design environment.
9. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
10. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
11. The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, pressurized accumulators and other hardware related with life support systems.
12. Experience in one or more of these fields is required.

Education/Certifications:
1. Bachelor’s Degree of Science in Engineering or Technology.
2. MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
1. Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems (less experience will be considered).
2. Desired experience must include working on the manufacturing of components such as, heat exchangers, pumps, fans, & pressurized accumulators.
3. Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
4. Familiarity with a modeling and/or design package such as ProE, Creo, NX, Catia, SolidWorks (Creo Parametric is desired).
5. Knowledge of Lean Manufacturing, machining concepts, additive manufacturing and special processing, such as welding and brazing, is highly desirable.
6. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
7. Experience with an MRP (Manufacturing Resource Planning) system is desirable.
8. US Citizen is required.
 
Job Number: 12231
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 12213
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification. Document creation and interior compliance experience preferred.
 
Job Number: 20-150863
Job Location: GA
Rate: $55.00/per hour
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Unique Skills:

Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification. Document creation and interior compliance experience preferred.


Education and Experience Requirements:

Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.


Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of business aircraft.

Principle Duties and Responsibilities:

Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Location: GA
Rate: $49.60 +
Per Diem: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
POSITION SUMMARY:
Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

• 5+ years of experience.
• BS degree preferred
• Must have ON THE JOB EXPERIENCE with Solidworks.
• Preferably 5 years of experience from aircraft completions industry
• Must have experience designing waste water systems as that carries the most importance.
• They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
• Must be self-sufficient and NOT require guidance.
• It is preferred if they have experience with collaborating data in Solidworks.
• Experience with report writing


The Structures Company is an AA/EOE.
 
Job Number: 340
Job Location: IN
Rate: $57-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
We need a Mechanical Systems Engineer for our client in Indianapolis, IN. 6 Month Contract.

Years of exp – 5+ years of experience.
BS degree preferred
Must have experience from aircraft completions industry
Must have experience designing waste water systems as that carries the most importance.
They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
Must be self-sufficient and NOT require guidance.
Must have strong experience with Solidworks.
It is preferred if they have experience with collaborating data in Solidworks.
Experience with report writing
 
Job Location: IN
Rate: $57 +
Per Diem: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Unique Skills:
Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
Document creation and interior compliance experience preferred.

Education and Experience Requirements:
Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
18 months of related Engineering experience.
Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.


Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture aircraft.

Principle Duties and Responsibilities:

Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements
Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
Perform other duties as assigned.

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 150863
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: Long Term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

Unique Skills:
• Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
• Document creation and interior compliance experience preferred.

Education and Experience Requirements:
• Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
• 18 months of related Engineering experience.
• Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Essential Functions:
• Solves typical engineering problems within assigned discipline
• Provides technical assistance to engineering staff and contributes to completion of project milestones
• Responsible for a complex engineering assignment, or a full project of lesser complexity
• Follows established schedules while developing plans for engineering assignments
• Obtains appropriate level of supervisor approvals for work accuracy and adequacy
• Proficiently applies company/organization policies and procedures

Other Requirements:
• The level of technical skills and abilities appropriate for this grade will be established by each discipline.
• Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
• Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
• Ability to convey technical concepts in both written and verbal formats.
• Contacts are primarily within the organization, with occasional customer contacts on routine issues.
• Works under general supervision for routine tasks of minor complexity.
• With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 24-389
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Prefer experience in executive/business jet cabin Mechanical Systems STC design and certification.
2. Document creation and interior compliance experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. 18 months of related Engineering experience. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Solves typical engineering problems within assigned discipline.
2. Provides technical assistance to engineering staff and contributes to completion of project milestones.
3. Responsible for a complex engineering assignment, or a full project of lesser complexity.
4. Follows established schedules while developing plans for engineering assignments.
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy.
6. Proficiently applies company/organization policies and procedures.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
3. Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 12144
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possiblw
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
5 years’ experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier. *** Candidate must be US Persons. **
 
Job Number: 20-152181
Job Location: GA
Rate: $70.00 per hour
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
4. Assist in developing and documenting standards for the handling and utilization of metrology equipment.
5. Create standardized inspection reports through the utilization of Metrologic software.
6. Study and optimize equipment performance for increased capacity and equipment efficiency.
7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
10. Coordinate the implementation of projects between multiple organizations.
11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements.
2. Assist tool shop as needed, during periodic and conformity Inspections.
3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques.
2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 149441
Job Location: Savannah, GA
Rate: $50/hr to $55/hr
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate:
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11978
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer

Description:
Client is looking for a PCB Designer candidate.
Job Description:
Candidate should have High speed digital and RF mixed signal PCB designs using Cadence Allegro or OrCAD.
Generation of Assembly and Fabrication packages utilizing AutoCad, Blueprint and Cam350.
Footprint and Library Development.
Qualified individuals should have a strong background in electro-mechanical design and experience in high density, multi-layer designs, Knowledge of PCB fabrication and IPC specifications a plus.
 
Job Number: S&PDE_MD
Job Location: Germantown, MD
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Nesco Resource is recruiting a Metal Stamping Process Engineer with at least 5-7 year's experience to join our client in Winsted, CT. The Metal Stamping Process Engineer will plan and establishes sequence of operations to stamp parts and to promote efficient utilizationlead; recommend methods for improving utilization of of personal, materials and utilities manage; prepare reports for management review of maintenance operating system metrics, major issues and root cause report and initiate new continuous improvement projects. The Metal Stamping Process Engineer will also be responsible to lead and develop new shop floor layouts. The ideal Metal Stamping Process Engineer will have a strong knowledge of stamping and progressive stamping, lean tools and concepts and Kaizen events. AutoCAD preferred.



Required:

Bachelors of Science in Industrial Engineering or Manufacturing Engineering or Mechanical Engineering

Metal Stamping

Minimum 5-7 year's experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-44946
Job Location: Winsted, CT
Rate: 88000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-12-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Michael Moritz
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineering Specialist

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
40% - Provide in-process technical guidance to production assembly and test processes. Disposition discrepant hardware. Resolve hardware constraints.
10% - Provide process technical expertise to support product design reviews and manufacturing/supplier readiness reviews.
10% - Analyze performance drivers, and lead project team(s) to implement processing efficiencies to achieve performance/cost targets, utilizing Lean manufacturing tools.
10% - Define assembly and test process specification requirements. Document lessons learned and best practices into assembly and test standard work instructions and manufacturing planning. Develop and provide technical training to technicians.
10% - Maintaining tooling and work center readiness (calibration, preventative maintenance plans, Foreign Object Elimination).
15% - Utilize process input and output characteristic data (statistical process control, as applicable) to drive process improvement and process control to achieve cost of quality targets. Perform relentless root cause analysis and lead project team(s) to implement corrective and preventive actions.
5% - Identifying, reporting, and eliminating unsafe acts & unsafe conditions within assembly and test work areas.

Skills:
1. While performing the duties of this job, employees will be working in a Class 100,000 clean room.
2. Minimum required PPE includes steel-toed shoes, safety glasses, and clean room smock.
3. Experience with mechanical assembly methods, tools, and processes (including threaded inserts, lockwire, safety cabling, bolt stretching, lock washer installation bearing / bushing installation, bellville springs).
4. Experience handling, maintain, resorting critical sealing surfaces.
5. Experience dispositioning hardware and performing root cause analysis.
6. Experience using electronic planning and reading electronic drawings.
7. Strong analytical and communication skills (written and oral) are required, along with the desire to work in a collaborative team environment.
8. Candidates must have a demonstrated ability to organize and complete projects, objectives, and tasks.

Key Focus:
1. Precision Assembly
2. Torque Wrenches
3. Fastener Lube/Safety wire
4. Pressure and Leak testing (Single and multi zone)
5. Process and safety improvements
6. Corrective action investigations and implementation
7. 100 class clean room or better experience
8. FOD/FOE

Desirable Qualifications a plus:
1. Experience working with pneumatic pressure systems to perform leak testing using mass spectrometer/bubble soap solution.
2. Training or experience utilizing Lean manufacturing tools (Kaizen, VSM, 3P, manufacturing std work, process matrices, P-Q analysis).
3. Six Sigma or equivalent statistical process control training/certification.
4. Experience working in a Class 100,000 clean room (smock/gowning required).

Education:
1. Requires Bachelors degree in an Engineering, Industrial Technology or related technical discipline and 9 years of related experience working in a manufacturing environment (or an equivalent combination of education and experience).
 
Job Number: 12217
Job Location: Canoga Park, CA
Rate: $45.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician - no clearance CA

Description:
167499 Job Title: Production Test Technician

Work Site Address: Ventura, CA 93003
Job Number: 3069-1
Max Pay Rate: $23.00/hr
Start Date: 2/3/2020
End Date: 2/2/2021
Position Type: Contract

Job Summary:
JOB DESCRIPTION FOR THE 2 wire wrapping experience and/or harness build, repair positions AND 1 electrical blueprint interpretation and/or electrical repairs experience position:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

JOB DESCRIPTION FOR THE 2 valve repair/rebuild experience positions:
Mechanical knowledge and some experience with disassembly, clean and preparation, and reassembly of deluge valves following methods, procedures, standards, and sequences

2 wire wrapping experience and/or harness build, repair positions AND 1 electrical blueprint interpretation and/or electrical repairs experience position:
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

2 valve repair/rebuild experience positions:
lays out and assembles units for repairs and upgrades according to designs and specifications.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Conducts testing after repairs/upgrades, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
2 Positions are for candidates with wire wrapping experience and/or harness build, repair.
1 Position is for a candidate with experience in electrical blueprint interpretation and/or electrical repairs.
2 Positions are for candidates with valve repair/rebuild experience.
NO Degrees are required for these positions.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Yes 1 1 - 2 Years
Technical Skills Mechanical Aptitude Yes 1 1 - 2 Years
Technical Skills Wireharness Print Reading Yes 1 1 - 2 Years

Qty 5 positions
 
Job Number: LMRMS-3069-1
Job Location: Ventura, CA
Rate: 23/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Test Cell)

Description:
A Project Engineer (Test Cell) in San Antonio, Texas is currently available through Belcan with one of our Aerospace clients. You will be responsible for the maintenance and upgrading of Gas Turbine Engine Test Cells. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Electrical or Computer Engineering and 5+ years' experience gas turbine test cell design. This is a great Direct/Full-time opportunity with a growing company.

Project Engineer (Test Cell) Job duties:

* Maintenance and upgrading of Gas Turbine Engine Test Cells
* Facility design and systems design that support the test facilities.
* Work with computer, electrical and mechanical engineers/technologists to create systems that are accurate, maintainable and easy to operate.
* Design and implementation of these test systems including estimating, requirements gathering, technical analysis, troubleshooting, component selection/purchasing, commissioning and production support.
* Provide support to troubleshoot and repair test cell issues.
Based on knowledge of successful candidate:
Electrical / Computer Engineer
* Develop software for Engine Test Cell data acquisition and control using C# (.NET Framework), and LabVIEW.
* Design test cell electrical systems and develop electrical schematics.
* Troubleshoot and repair test cell electrical systems and harnesses
Mechanical Engineer
* Design and implement mechanical control systems including oil packages, fuel systems, air start control systems, etc.
* Work with Ladder logic to develop engine control systems
* Troubleshoot and repair test cell mechanical systems.

Qualifications:

* Bachelor's Degree in Mechanical, Electrical or Computer Engineering
* 5+ years' experience gas turbine test cell design.
* Proficient with AutoCAD
* Working knowledge of Word, Excel, Power Point, Project and Outlook.
* Must be authorized to work in the United States. Must be a U.S. Person as defined by ITAR/EAR.

If you are interested in this Project Engineer (Test Cell) in San Antonio, Texas, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298900
Job Location: San Antonio, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector IV ( Dulles, VA ) 9572942

Description:
Quality Inspector IV ( Dulles, VA ) 9567561 and 9567413 and 9572500 and 9572942
6 Month Contract

Pay rate: $35 - $40/hr W2

Prior aerospace inspection skills
Job# 9567561 and 9567413 and 9572500 POSITION IS FOR 1st SHIFT
Job# 9572942 POSITION IS FOR 2ND SHIFT

**Top 3: Mechanical or electrical piece part inspection experience, good computer skills, good technical writing skills. team: Receiving Inspection work center currently consists of 5 other QAI’s who perform inspections on various types of piece parts and assemblies that we have procured from other suppliers.

Description:
1. Perform in-process and final inspections on product throughout the SMF work centers (Receiving, Manufacturing, Integration and Test) and perform product build documentation review and end-item data package review.
2. Perform detailed inspections on both EEE and Mechanical components at the piece part level as well as the assembly and sub-assembly level.
3. Uphold quality standards and workmanship practices in assigned work centers by learning/practicing process specifications and employing quality workmanship standards during everyday job functions.
4. Generate nonconformance reports for discrepancies discovered during inspection processes.
5. Perform audits of work areas to ensure compliance with Orbital Sciences Corporations ISO 9001/AS 9100 procedures and Lean Manufacturing Principles.
6. Perform in-depth reviews of product build documentation for configuration audit to determine if as-built meets as-designed.

Prerequisites:
1. Must be able to read engineering documentation and inspect to drawings and parts lists, inspection plans, and supplemental instructions
2. Minimum 5 years experience in Quality Assurance or relevant experience in Electrical or Mechanical field of work in performance of technical job function
3. Able to use Microsoft applications and ability to learn new computer programs/applications easily.
4. Basic technical writing skills are required

Desirables:
1. Associates (2 year) degree from accredited institution
2. Knowledge in Mechanical, Electrical, or Radio Frequency (RF) Engineering is a plus.
3. Working knowledge of TIPQA and/or Costpoint database applications
4. Knowledge in how to read schematics and wirelists is a plus 5. Previous experience working in ISO-certified company
 
Job Number: 9572942
Job Location: Dulles, VA
Rate: 35-40
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineering Technician

Description:
An RF Engineering Technician job in Tempe, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering development and production activities such as testing, troubleshooting, and modification down to the circuit level of RF based hybrid electro-mechanical modules and sub-assemblies. To be considered for this role, you will have an Associate's Degree in Electronics Technology or a related technical discipline, plus a minimum of 2 years or related experience. Due to the nature of the work performed in this facility, US citizenship is required.

RF Engineering Technician Job duties:

* Assemble, disassemble, calibrate, fix and repair modules and sub-assemblies.
* Configure RF test setups and perform measurements such as gain, P1dB, noise figure, phase noise, adjacent channel rejection, and isolation.
* Conduct high level RF Tests and create associated documentation.
* Test, tune, and troubleshoot RF electronics to circuit level.

Qualifications:

* Basic electronic test and troubleshooting skills.
* Knowledge of RF test techniques, gain, and noise figure.
* Experience testing and troubleshooting RF amplifiers, LNAs, and Up/Down Converters.
* Familiarity with electronic test equipment spectrum analyzers, network analyzers, signal generators, etc.

If you are interested in this RF Engineering Technician job in Tempe, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297461
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
**U.S. Citizenship Required.
**Candidate must be able to obtain and maintain a Secret Security Clearance.

Job Responsibilities:
Responsible for establishing the processes for managing Logistics Control Numbers within a database working independently with minor direction from Manager and lead.
Assignments are often self-initiated and candidate determines and pursues courses of action necessary to obtain desired results.
Direct and guide the processes for Functional Logistics Control Numbers (FLCN) mapping and be responsible for evaluating LCNs for accuracy, applicability, and proper structure.
Responsible for developing a disciplined workflow process for the creation, update, maintenance, and retirement of LCNs.
Candidate will be the primary point of contact for LCN management and will conduct meetings, coordinate resolution of issues arising from inaccurate LCNs mapping structure and implement corrective actions.
Require working across functional teams and working to ensure the best solution is adopted for implementation. They will also be responsible for ensuring corrective actions that have been implemented are effective.
Develop concise formats, and generate and present information utilizing computer readouts, graphs, charts, tables, written reports or other methods.

Basic Qualifications:
Degree from an accredited college in Mechanical, Electrical Engineering or a technical degree.

Desired Skills:
Experience managing large sets of data using a maintenance data collection system, centralized failure / corrective action data collection system, data library, and/or Excel.
Experience using UGS Teamcenter (Product Data Management Tool) and VAS (Visualization Assembly System).
 
Job Number: 40144
Job Location: Fort Worth, TX
Duration: 12 mos
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Rotary Wing Rotors & Blades Part Design / Process Design Engineer (10-15 yrs exp)

Description:
This candidate will support, perform and manage the activities to produce the designs and processes for Rotary Wing Rotors, Blades and Transmissions. They will be the support liaison to design and manufacturing processes or definitions required for system components.

Desired skills include:
• B.S. in Mechanical or Aeronautical Engineering
• 10 to 15 years in Part Design and/or Process Design
• Experience with CATIA V5 and/or 3DX, or equivalent CAD system
• Working knowledge of GD&T
• Experience with advanced Surfacing / Lofting, Design of Dynamic Components
• Working knowledge of Structural Composite Repair and Tooling
 
Job Number: 1910109579
Job Location: Fort Worth, TX
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sales Engineer

Description:
Permanent Opportunity that will be remote



Nesco Resource is looking for a hands-on, experienced Sales Engineer to sell pumps, mechanical seals, and services to existing and new customers in the chemical and oil/gas industries in the MidAtlantic Region (West Virginia, Eastern Ky. area). Our reputation as a global leader
for design, quality, and service will support the Sales Engineer to demonstrate a value proposition and establish long-term business relationships. The Sales Engineer will create a lasting competitive advantage for the company by understanding our products and their applications in our customers operations. The Sales Engineer will be forward-thinking by identifying opportunities, developing marketing plans, and achieving increased sales over time.



The position has a salary base with sales incentives. A company car is included in our comprehensive benefits package. Up to 50% travel is required as the territory, at present, is comprised of West Virginia and Eastern Kentucky

Position Requirements:

• Knowledge of the design and operational requirements of rotating pumps, mechanical seals, and related equipment

• Must be skilled at product demonstrations, presentations, and business writing

• Must be computer savvy by using available technologies to manage daily activities. Strong Microsoft Office skills needed including the ability to manipulate Excel complex spreadsheets, word processing, and presentation software

• Demonstrated financial acumen to discuss business decisions, especially return on investment in support of solution selling

• Able to lead a root cause failure analysis and communicate results

• Demonstrated skills in leading meetings, including setting agendas, preparing, facilitating discussions, and assigning follow-up activities

• Track record of success as a flexible multi-tasker with good follow-through to meet urgent deadlines with little or no supervision

• Some physical activity required (e.g., walking large customer sites, lifting at least 50 lbs, and ascending/descending ladders and staircases in multi-story facilities)

• Engineering degree or equivalent Industrial sales experience with a track record of self-initiated, sustained sales success. Training in sales techniques, negotiations, and business finance. 3+ years sales experience with rotating equipment such as pumps and mechanical seals.



Preferences: • Experience with CRM tool 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 20-04887
Job Location: Irving, TX
Rate: 80.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2020-02-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager, Loads & Dynamics

Description:
General Summary:

The Senior Manager for Loads will be responsible for people, processes, and tools to meet the current and future Aircraft Loads analysis needs of the Aircraft sustainment and future development programs. Will be responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
In this role you will be responsible for guiding the loads analysis team along with defining and validating aircraft flight and ground loads through simulation/calculation using established theory and methods.


Qualifications
Education, Work Experience, Certification and/or Licensure:
• BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
• Applicant shall possess a minimum of 10 years’ experience in aircraft external Loads analysis and 6 years leading teams
• Excellent communication skills both written and verbal
• Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.
• Travel required 25% or less.


Knowledge, Skills and Abilities:
• Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
• Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
• Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks.
• Must be proficient in generating documentation to support certification efforts related to external loads.
• Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required.
• Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
• Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
• Good fundamental knowledge of mass properties principles as they relate to loads analysis
• Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable.
• Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis.



The Structures Company is an AA/EOE.
 
Job Number: 362
Job Location: NC
Rate: $147-$170K **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Engineer ( Clearfield, Utah ) S9778040

Description:
Senior Principal Engineer ( Clearfield, Utah ) S9778040
12 Month Contract

Pay Rate: Open

Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9778040
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
South Greeley, Wyoming - Project Manager / Engineer

Description:
Location: South Greeley, WY
This position requires an experienced discipline engineer who is also a proven project manager. The position leads to increasing responsibilities within the company over the next several years.

Must be a mechanical/process, structural or electrical/controls engineer with a PE. Must have or be willing and able to obtain a California license promptly. Engineering qualifications vary depending on discipline. We design and fabricate containerized hydrogen systems on behalf of others (aka EPC). Experience with hydrogen systems, structural supports, skids, PLC controls, and tubing and mechanical equipment specs are desirable and will be discussed during an interview. Will be responsible for writing material and equipment specifications, performing calculations, sizing, bidding and procuring commercially available components. We design the containers or use existing skids/containers an integrate technology within them. All designs are to be modelled in 3D - must have some CAD capability and be able to work well with designers. Must coordinate and work well with other disciplines and suppliers. Ideal candidate will be familiar with and able to use CadWorx 2018 or newer. Drawings will be issued for construction and permitting to local authorities for projects all over the country. Must be familiar with and comfortable with Continuous Quality Improvement and KPIs. Resume must demonstrate success at meeting cost, schedule and quality goals for completed projects.

Must have demonstrated skill as a Project Manager, preferably in the Petrochemical or Power industries. A minimum of 10 years’ relevant experience is required. Conversant with WBS, cost and schedule preparation and control using MS Project, earned value calculation, and periodic progress reporting. Our projects are typically less than $2MM- will be expected to manage multiple projects simultaneously. Will prepare and maintain Project Management Plans including Project QA/QC Plans, budgets and schedules and also manage work to meet requirements in these documents. Will be principal point of contact with Clients. Some domestic travel may be required.
 
Job Number: 10194
Job Location: South Greeley, WY
Rate: 90/hr+
Per Diem: split
Overtime: no
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION RESOURCES COMPANY INC
Attention: Scott Houle
Address: P O BOX 318
City, State: SHARON, MA 02067
800 Phone: 888/431-6300
Fax Phone: 888/431-6301
Website: www.prcnational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
A Sr. Mechanical Engineer job in Marion, VA is currently available through Belcan. In this role, you will be responsible for leading, planning, and executing full program lifecycle of mechanical designs from concept, detail design, fabrication, to production within defined budget, schedule, and scope, taking into account customer requirements, on site specialist's requirements, ergonomics, tolerance stack-up, design to cost, industry standards, etc. To be considered for this role, you will have a Bachelor's degree in Mechanical Engineering, a related specialized area or field, plus a minimum of 2 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Mechanical Engineer Job duties:

* Creates new and/or revises existing 3D mechanical designs, 2D drawings, and bills of material for products using CAD software. Guides CAD team members that support the detailed design and/or drafting.
* Under the guidance of Structural Engineering specialists, support structural loads testing, construction element testing, and material mechanical properties testing.
* Under the guidance of Tooling Engineering specialists, develop and implement composite tool designs such as lamination molds, trim/drill fixtures, machining fixtures, and assembly jigs.
* Perform make vs. buy evaluations for mechanical designs including preparation of statements of work, and support vendors to ensure that technical requirements are fully communicated and understood.
* Prepare cost estimates and lead times for mechanical designs to support proposal efforts.

Qualifications:

* Must be proficient with CAD solid modeling and creating the accompanying drawing packages.
* Must be proficient with CATIA V5 (or equiv.) to create mechanical models and accompanying drawings.
* Experience with mechanical stress analysis. Able to perform basic structural calculations to confirm viability of a design.
* Understanding of tolerances, thermal expansion, cure shrinkage, spring-back and other factors influencing tool design and performance.
* Ability to interpret engineering drawings including working knowledge of GD&T.

If you are interested in this Sr. Mechanical Engineer job in Marion, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298527
Job Location: Marion, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Process / Welding Engineer

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
50% - Oversee and troubleshoot critical weldments ensuring best practices for weld fit-up, cleanliness requirements and weld parameters are followed.
15% - Develop weld parameters and document best practices to support production.
15% - Perform statistical process analysis of welding processes.
10% - Define weld machine/specification requirements.
5% - Perform root cause analysis and disposition discrepant hardware.
5% - Accurately report problems, solutions, and results, in concise written and oral communications. Communicate effectively between team members and customer counterparts.

Skills:
1. Experience working with Torch Weld Jigs (TWJ), setting weldments up for exact shrinkages to fit TWJ post weld.
2. Experience dispositioning hardware and performing root cause analysis.
3. Process capability and statistical analysis experience.
4. Previous experience developing weld parameters for manual and In-Place-Tube or Automatic G.T.A. welding or E.B. welding.
5. Familiarity working with electronic planning, drawings, and pertinent documents such as weld parameters.
6. Demonstrated teaming skills.
7. Strong analytical and communication skills (written and oral) are required, along with the ability to lead teams and work in a collaborative team environment.
8. Experience using appropriate PPE.

Experience with the following is a plus:
1. Working with D17.1 or Journeyman Weld certifications.
2. Writing weld machine specifications.
3. Using electronic planning and drawings.
4. Moving large structures or hardware.

Education:
1. Requires a Bachelor's degree in Weld Engineering, Mechanical Engineer, Industrial Technology and 5 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys, or an equivalent combination of education and experience.
 
Job Number: 12216
Job Location: Canoga Park, CA
Rate: $37.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004358)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Feb 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Client is looking for an experienced digital board designer to join its team at the Redondo Beach, CA location.

Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Coordination with other design specialties such as packaging engineering
- Requirements development & flow down
- Support test Hardware development
- Interface analysis
- Board/unit Integration & test

Qualifications

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production

Preferred Qualifications:

- 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1846ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer / 2nd shift / Nastran Patran FEM analysis DaDT - no clearance CA

Description:
167042 Staff Structural Engineer (Job Number: 19035635 or 19035638)

Number of Openings: 2

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr

Work Schedule: 4/10 - 2nd Shift

Duration of Assignment: Up to 1 year

2 Openings

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.


Preferred Qualifications:

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1828
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Engineer / 2nd shift / structural analysis of fighter aircraft structures - no clearance CA

Description:
Staff Structural Engineer (Job Number: 20004057, 20004060)
Number of Openings: 1
Location(s): United States-California-Palmdale

Shift: 2nd Shift
Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr
Work Schedule: 4/10 - 2nd Shift
Duration of Assignment: Up to 1 year

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at the Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1844
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst Engineer

Description:
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Number: 358
Job Location: IN
Rate: $65/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Position Summary:

Design complex, standard or custom, mechanical and structural airframe installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

This assignment is expected to be approximately 12-18 months in duration.

Primary Responsibilities:

Detail Design: 50%
Create detail/assembly/installation drawings for new helicopter completions and STC projects.
Review and facilitate engineering package release.
Works with groups of engineers to complete projects.
Works under general supervision from the Lead engineer
Follows established procedures
Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
Project Coordination: 20%
Coordinates essential information into the configuration management system listing mechanical and structural installations for each aircraft unit produced by AHI
Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
Engineering Support: 20%
Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
Act as liaison to manufacturing and production efforts as needed.
Support installation, functional and operational tests, and ground and flight tests.
Structural Substantiation: 10%
Performs preliminary stress analysis in support of initial layout and design concept.
Additional Responsibilities:

Other duties as assigned.
Qualified Experience / Skills / Training:

Education:

Required:

Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent experience
Experience:

Required:

Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
Preferred:

Minimum one (1) year of helicopter design and integration.
Licensure/Certifications:

Required:

None
Preferred:

None
Knowledge, Skills, Demonstrated Capabilities:

Required:

Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

Must be able to communicate effectively in the English language (verbal and written).
Conversational French and/or German is a plus.
Technical Systems Proficiency:

Must be proficient with Microsoft Office Suite programs.
Minimum 4000hrs CATIA V5 (or similar 3D modeling software) , familiarity with AutoCAD and SAP programs
Travel Required:

5%
Minimal domestic and International travel is required.
Citizenship:

US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
 
Job Location: TX
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Tracey Hill
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer - Direct Hire

Description:
Major functions:

In this role, the Supplier Quality Engineer (SQE) will support and interface across functional disciplines including Program Management, Supply Chain, Manufacturing and Engineering personnel. The SQE will be an active and significant contributor in the evaluation, development and monitoring of key Suppliers and Subcontractors, create Quality requirements, participate in the generation and review of requirements, and validate flow down of expectations. The SQE will communicate and ensure our Suppliers and Subcontractors understand stated requirements, have the capability to consistently and predicatively meet, and provide conforming products and services. Will manage Supplier and Subcontractor performance and validate the implementation of effective procedures, test methods, and process controls, geared toward risk mitigation. Proactively monitor, analyze, report on, and participate in the improvement of Supplier and Subcontractor process and product performance. Lead failure analysis, complex problem solving and corrective action efforts, and drive the development of technical solutions. Participate and/or lead improvement efforts and as a member of cross-functional teams. While acting as a conduit between the external source and internal resources.

Lead the verification, validation and acceptance of proposed product design and Supplier and Subcontractor process changes. As needed, participate in the review and disposition of nonconforming product while representing the organization as a prime technical resource. SQE will perform Supplier and Subcontractor audits and follow-up assessments as needed.



Education/Experience/Licenses etc.:

Bachelors Degree and minimum 6-years of prior relevant experience or Graduate degree in Engineering, Business or Technical discipline and a minimum of 4-years of prior related experience, preferably in a high volume optical and/or electro-mechanical manufacturing organizations with focus on government, military and law enforcement products.

Extensive technical expertise in either thermal technology, lasers, optics, machining/molding, and/or electronics is required, as is a proven work history in project leadership and technical problem solving.

Experience in Advance Product Quality Planning (APQP) a plus.

Must be a self-starter and able to adjust quickly to changing priorities and assignments. Intermediate to advanced SPC/Data analysis skills and proven ability to perform DOE, FMEA, ANOVA and Gage R&R analysis a strong plus.

 
Job Number: 20-04845
Job Location: Londonderry, NH
Rate: 60.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2020-02-24 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer-Engines Tooling

Description:
A Technical Designer-Engines Tooling job in Kent, WA is currently available through Belcan. The Technical Designer-Engines Tooling job will Design and maintain component and assembly product definition by preparing design layouts and drawings, modifying existing designs and resolving design discrepancies This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight.

Technical Designer-Engines Tooling duties:

* Apply Design for Manufacturing and Design for Assembly
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Implement engineering and manufacturing best practices to achieve a balanced approach to
cost, schedule and performance requirements
* Self-prioritize and self-schedule work activity in support of the team
* Assist in the development and deployment of reasonable standards for drafting.
* Support drafting standards checking and training for the team.

EDUCATION AND EXPERIENCE REQUIRED
* 5+ years of experience designing/drafting structural parts, precision components, and/or
subsystems
* Proficiency in Creo Pro/E and Pro/E Piping, Sheet Metal, and Mechanism
* Experience with mechanical and weldment design and component integration Experience
creating and maintaining family tables; ability to work on multiple projects in parallel
* Strong work ethic with a high attention to detail and level of organization
* Extensive knowledge of precision machined component design and manufacturing
* Experience managing large CAD assemblies and associated drawings
* Extensive experience and knowledge of ASME Y14.5 Geometric Dimensioning and Tolerance

Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Technical Designer-Engines Tooling job in Kent, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 299013
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer 3 - no clearance CA

Description:
Technical Editor and Writer 3 (Job Number: 19035727)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Dec 16, 2019

Target End Date: Dec 11, 2020

Pay Rate: $38 - $40/hr

Work Schedule: 9/80A

Duration: 1 year

Location: Palmdale


Writes, rewrites and/or edits technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals. Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts. Conducts quality review of materials.


Basic Qualifications:

6 Years with Bachelors; 4 Years with Masters


Required and Asset Skills & Experience

· Aerospace background with Engineering knowledge (mechanical, aerospace, electrical etc.) and/or hands-on experience in the aerospace maintenance field
· Experience with S1000D, ATA2200 and/or MIL-SPEC specifications is an asset
 
Job Number: JK-1824
Job Location: Palmdale, CA
Rate: 38-40/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician - no clearance MA

Description:
166647
Job Title: Technician

Work Site Addres: Marion, MA 02738
Job Number: 2462-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Exclude technicians working in production or quality assurance.

Qualifications and Education Requirements
This position does not require a BS Degree.
Technician experience

Skills: Category Name Required Importance Experience
Technical Skills Technician knowledge No 1 < 1 Year Qty 1 position Hiring Manager is looking for someone with Technician experience
 
Job Number: LMRMS-2462-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician - no clearance WA

Description:
167500 Job Title: Technician

Work Site Address: Bothell, WA 98021
Job Number: 3106-1
Max Pay Rate: $26.00/hr
Start Date: 2/6/2020
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Building and testing of various laser components (optical, mechanical, and electrical) in support of engineering development and pilot production.

Roles and Responsibilities
The engineering technician will work closely with other technicians and engineers in executing tasks that could include cable harness assembly, subassembly & box level assembly / test, thermal testing, fiber optic splicing, and other similar assembly and test tasks both in the R&D labs and on the pilot production line.
The engineering technician will also support the upkeep of the labs including ordering consumable supplies, tracking calibrated equipment, and other similar tasks.

Qualifications and Education Requirements
BA Degree is NOT required

Basic Qualifications:
Experience in wire harness build and routing.
Mechanical assembly history and familiarity with electrical systems and circuit boards.
Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
Ability to read blue prints, schematics, and drawings and following verbal and written instructions.
Experience reading work instructions and performing tasks as per instructions.

Desired skills:
Educational background and/or experience in electronics or optics.
Experience running, testing, and measuring lasers or complex optical systems.
Experience in handling fiber, fiber splicing equipment including fiber polishing equipment.
Experience in testing and troubleshooting electrical systems and replacing electrical connectors, terminal lugs, and wires
Experience in testing analog, power electronics, RF, and digital circuits.

Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Troubleshooting Yes 2
Areas of Expertise General Assembly No 2
Areas of Expertise Testing Lab Experience No 2
Technical Skills Basic Computer Skills Yes 2
Technical Skills Soldering No 9


Qty 1 position
 
Job Number: LMRMS-3106-1
Job Location: Bothell, WA
Rate: 26/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search