Job Search Results

612 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/09/23 Monday 08:23AM Pacific Time by ContractJobHunter. )

Listings 1 - 612

Go To My Job Tracker

Expand all descriptions

2 Structural Design Engineers - With CPD Or Fibersim Experience

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: MoJave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/29/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 08/08/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Branch Mechanics needed in Mira Loma, CA

Description:
PDS TECH INC is looking for 3 more Mechanics in Mira Loma, CA

If you are interested - meet the qualifications and available for on OnSite interview...
Send resume to: denglert@pdstech.com 

 

Responsibilities include:
Perform mechanical services and repairs (disassemble and replace with new parts -
refurbishment
• Maintain all assigned company tools and/or equipment in the branch area or on service trucks.
• Completes necessary work orders, parts orders, delivery reports, time sheets, and other paperwork required to document the mechanical work and other duties accomplished.

Education: High School Diploma or G.E.D. required
• Years of Experience: 2 or more years of mechanical assembly experience required - Previous experience servicing vehicles is preferred


 
 
Job Number: 1910103159
Job Location: Mira Loma, CA
Per Diem: No
Duration: 12 months
Input Date: 06/19/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033k95QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Aloca, TN
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JE-1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Per Diem: no
Duration: 9 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JE-1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Additive Mechanical Engineer

Description:
***Position Requires Interim Secret Clearance, which requires US Citizenship***
**One year contract located in Orlando, FL**


CSS Staffing is seeking a Additive Mechanical Engineer to support internal customers for research and development projects and contracted programs.Primary job responsibility will be to research, design, and develop additive manufactured products. This person will be required to perform all functions associated with the additive manufacturing process which includes, but not limited to, machine operation, laser scanning, specification compliance, completeness, accuracy, design soundness, ANSI Y14.5 GD&T standards, fabrication, assembly, installation, customer interface, tolerance requirements, and data management.

Required Skills
*1-3 years' of experience working as an Additive Mechanical Engineer and laser scanning
*Proficient with the use of ProE/CREO, and Pro/Windchill
*Knowledge of GD&T (Geometric Dimensioning and Tolerancing).
*Knowledge of ANSI Y14.5 standards for fabrication and assembly.
*Strong understanding importance of product detail, work schedules and task tracking/reporting.

Desired Skills
*Proficient with reverse engineering using laser scanning and GeoMagics software
*Experience with Magics software
*Design skills for creating 3D printed parts
*Current DoD Secret clearance.
 
Job Number: 999
Job Location: Orlando, FL
Rate: $34.00
Duration: 1 year or more
Input Date: 08/09/2019
Last Updated: 08/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/26/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches.
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


The Structures Company is an AA/EOE.
 
Job Number: 322
Job Location: NC
Rate: $52-$60/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Applications Engineer

Description:




Applications Engineer



Location: Saginaw, Michigan



SCHEDULE
:

7:00 AM – 4:00PM 



SUPERVISOR:

Engineering Manager

Summary

 The Applications Engineer will be accountable to evaluate customer requests and site drawings, to ensure fit and function of our product. An application engineer will provide in-depth technical knowledge for all of our products in pre-sales and post-sales roles. You will provide sales drawings in Solid Edge Works and provide review of specifications specs to support the sales estimating and bidding processes. You will be a part of the product team and oversee equipment designs for fit and function. You will collaborate with R&D when new products are to be transferred in to production to ensure that our standards are kept and captured for reference. As a subject matter expert (SME) you will be a resource to the designers to transfer your knowledge in a way that will forward their ability to handle jobs accurately and efficiently. You will communicate with our customers and manufacture's representatives to ensure that we have whole and complete information. While communicating with outside sources, you will represent our company in a positive light only disclosing product and company data as appropriate for sales. You may be called upon to train our personnel as needed. Occasional travel, (up to 20%), may be required to visit sites, measure and ensure a fit for the customer and DC. You will be accountable to meet the product group standards, as assigned by the Engineering Manager. 



Essential Functions:

  • Listen to the needs of our customers and apply the correct equipment that will meet their needs.

  • Understanding of Wastewater, Storm water processes and various industrial processes.

  • Accountable for timely, detailed review of customer specifications to accurately support sales in bidding projects. Applying our application protocols, while assessing the needs of the project and coordinating information with other subject matter experts internally.

  • Exceptional customer service through professional, timely and accurate design support, communications etc.

  • Ensure our design standards are kept in tact through all phases of our projects.

  • As a subject matter expert (SME) you will be required to problem solve, learn new concepts and contribute sound application engineering to the company's products and processes.

  • Sales drawings turned around in 2-5 days (as required to support Sales), all drawings are to be delivered on time, consistent to DC standards, within budgeted hours and customer requirements.

  • Attend handoff meetings at receipt of PO and release to engineering; must support project application prior to submittal release as required to meet customer/DC Schedules.

  • Capture lessons learned with the product team, assess and implement changes/updates as needed into the application process and integrate this knowledge in to sales project management processes.

  •  Applications Engineer will ensure accuracy of engineering protocols, documented procedures.

  • Shall have in-depth knowledge of pricing, labor, alternative materials, marketing objectives & sales process.

  • Will follow all standards/processes as designated by company's QC, ERP and other process controls.

  •  Accountable for whole and complete product (fit and function) from proposal to post-sales.

  •  Due to the amount of interactions between customers and our internal teams; this position requires you to work in the office environment.




Education:



Bachelor Degree preffered  but not required.



College degree in Mechanical Engineering, Engineering Technology or Architectural Technology is strongly preferred or equivalent experience considered. .



Experience Required:


  • Required: Engineering of mechanical equipment 3 years or Architectural/Construction engineering 8 years 

  • Required: Computer Experience & Proficiency: MS Office programs, such as Outlook, Word and Excel


Required:


  • Proficiency in Solid Works or Solid Edge along, able to understand and translate mechanical blueprints.

  • Exposure to machinery design and mechanical concepts. Proven experience in resolving mechanical engineering production issues for equipment.


 Skills:


  •  Able to understand and create drawings (mechanical and civil) to industry standards.

  • Meticulous attention to detail, able to multi-task well and complete projects on time, within budget, to the customer's satisfaction.

  • Must have excellent customer and people skills: should be able to represent the company's image (consistent with the business motto of "you'll like working with us!”)

  • Must be self-initiating, independent, and able to organize time and diverse responsibilities.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33344
Job Location: Saginaw, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-12 00:00:00.0
Input Date: 08/12/2019
Last Updated: 09/23/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 04/04/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Assembly Mechanic

Description:
PDS Tech is seeking an Assembly Mechanic in Arlington, TX
  • Constructs, maintains, and tests mechanical equipment, machinery, and components.
  • Identifies parts for replacement and machines that need new parts and places orders as necessary.

Requires a high school diploma or its equivalent. 
May be required to complete an apprenticeship and/or formal training in area of specialty. May require 6-8 years of experience in the field or in a related area. 
 
Job Number: 1910100973
Job Location: Arlington, TX
Duration: 6 months
Input Date: 05/01/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dTLQAY&URLSource=cjhunter

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Engineer

Description:
Location: Riverside, CA
Rate: $75.00/HR
Duration: 1 year contract
Shift: 2nd Shift
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Primary Responsibilities:
1. Performs relentless root cause analysis to eliminate downtime on CNC equipment and robots.
2. Assists maintenance personnel in diagnosing equipment issues, addressing machine alarms/faults, and developing preventative maintenance plans.
3. Works on projects to assist in the technical planning, system integration, verification and validation for CNC and robotic systems.
4. Creates and maintains standard work for machine operators and engineering processes, including verification and certification procedures.
5. Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget.
6. Contributes to finding appropriate solutions.
7. May require travel to Mexicali for equipment support/training.

Required Skills and Experience:
1. Bachelor of Science in Electrical, Mechanical, Aerospace or similar discipline, with 5-7 years experience in an engineering role supporting CNC equipment and robots.
2. Masters of Science in Electrical, Mechanical, Aerospace or similar discipline, with 2-3 years experience in an engineering role supporting CNC equipment and robots.
3. Expertise with the operation of CNC equipment with Siemens 840D controllers, Fanuc 16i, Kuka robots, Fanuc robots, etc.
4. Excellent verbal and written communications with all levels of the organization.
5. Fluency in reading, interpreting and creating electrical, mechanical, and fluid drawings/schematics.

Preferred Skills and Experience:
1. Experience with programming languages such as Python or C+
2. Basic knowledge of SQL databases ad computer networking
 
Job Number: 11309
Job Location: Riverside, CA
Rate: $75.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 08/12/2019
Last Updated: 08/20/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Engineer (CNC)

Description:
2nd shift Automation Engineer

Primary Responsibilities:
Performs relentless root cause analysis to eliminate downtime on CNC equipment and robots.
Assists maintenance personnel in diagnosing equipment issues, addressing machine alarms/faults, and developing preventative maintenance plans.
Works on projects to assist in the technical planning, system integration, verification and validation for CNC and robotic systems.
Creates and maintains standard work for machine operators and engineering processes, including verification and certification procedures.
Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget.
Contributes to finding appropriate solutions.

Required Skills and Experience:
Bachelor of Science in Electrical, Mechanical, Aerospace or similar discipline, with 5-7 years experience in an engineering role supporting CNC equipment and robots
Masters of Science in Electrical, Mechanical, Aerospace or similar discipline, with 2-3 years experience in an engineering role supporting CNC equipment and robots
Expertise with the operation of CNC equipment with Siemens 840D controllers, Fanuc 16i, Kuka robots, Fanuc robots, etc.
Excellent verbal and written communications with all levels of the organization.
Fluency in reading, interpreting and creating electrical, mechanical, and fluid drawings/schematics.

Preferred Skills and Experience:
Experience with programming languages such as Python or C+
Basic knowledge of SQL databases ad computer networking
 
Job Number: 50456
Job Location: Riverside, CA
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Product Assembly & Repair Technicians

Description:
STS Technical Services is hiring Aviation Product Assembly & Repair Technicians in Elizabeth, New Jersey!

Job Summary:
This is a position for a repair/assembly technician working on Aviation Cargo Containers. The techs will repair ULD’s (Unit load devices) and metal pallets.

Job Duties:
Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
Comply with FAA and company policies and procedures
Ensure accurate and timely completion of work orders
Ability to perform routine and non-routine tasks independently
Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
Maintain safe and clean work environment
Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
Provide feedback/suggestion to improve customer satisfaction
Perform any other duties as assigned by the Station Manager/Supervisor
Qualifications:
Aviation experience a plus, but not required
Warehouse experience a plus, but not required
Physically fit individuals who have some sort of mechanical ability preferred
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44180
Job Location: Elizabeth, NJ
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 09/20/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
RESPONSIBILITIES:
This position provides support to the Air Force’s Life Cycle Management Center’s (AFLCMC) Technical Engineering Services Directorate (AFLCMC/EZ) in conducting an analysis of the known Navigation Warfare (NAVWAR) and cyber risks associated with positioning, navigation, and timing (PNT) avionics onboard USAF aircraft. The engineer will contribute to AFLCMC/EZ’s effort to analyze NAVWAR and cyber risk associated with PNT subsystems for USAF aircraft. The engineer will work daily with Government employee PNT technical experts and cyber risk assessment specialists. The engineer will frequently be called on by the AFLCMC/EZ Government customer to facilitate technical meetings and support the development of cyber and NAVWAR risk assessment briefings.
Responsible for collaborating with Government employees to conduct NAVWAR and cyber risk analyses for PNT avionics subsystems. The engineer will facilitate risk analysis activities both within AFLCMC/EZ and in outreach activities with USAF aircraft System Program Offices (SPOs) and technical centers of excellence across DoD. Responsible for the day-to-day execution of NAVWAR and cyber risk analysis and reporting activities under the oversight of AFLCMC/EZ Government employees. Facilitates the planning and execution of technical interchanges associated with avionics cyber risk analyses.

REQUIRED EXPERIENCE:
5 years of military or commercial avionics experience
5 years of experience as a DoD employee or contractor
Excellent planning and organizational skills, both in terms of task execution tracking and task planning
Excellent communications skills, both written and verbal
Proficiency with Microsoft Office tools (Word, PowerPoint, Outlook)

DESIRED QUALIFICATIONS:
Active TOP SECRET/SCI security clearance
3 years of experience at an AF Product/Logistics Center, or similar US Army/US Navy Center, assigned to a System Program Office; or 3 years of experience in the AFLCMC Engineering Directorate
Experience with industry standard or DoD operational risk management practices
Familiarity with the RMF as it applies to avionics subsystems
Level II DAWIA Certification in Engineering, Test and Evaluation, Information Technology, Program Management
Experience as an FAA Designated Engineering Representative (DER) or a similar position

TRAVEL: 10%

EDUCATION:
Accredited Bachelor’s Degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, Software Engineering, Computer Science or a closely related field. Applicants with electrical engineering technology, mechanical engineering, operations research, mathematics, or statistics will be considered as well.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift
8:00 AM - 5:00 PM
 
Job Number: 180331
Job Location: Wright-Patterson AFB, OH
Rate: OPEN
Per Diem: Split possible
Overtime: Not specified
Duration: 12/+ months
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 07/31/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

CAD Designer

Description:
Chipton-Ross is seeking a Technical Design 2 located in Kennedy Space Center, FL.

RESPONSIBILITIES:
Uses 3D Computer Aided Design (CAD) and Manufacturing tools, to develop and maintain mechanical/structural engineering products, environments and trade studies. Prepares design layouts and modifies existing designs to satisfy customer requirements. Assists with the use of 3D laser scanning equipment used for creating as-built and models of large structures and platforms. Develops statements of work, including design requirements, cost and schedule estimates. Contributes to the integration of engineering models across client and NASA customers to provide a functional end-product. Ability to Lead a project and work under low supervision, ability to multitask and ability to work well within a team environment. Mentors less experienced personnel. Works under general direction.

REQUIRED EXPERIENCE:
CAD - Not Required - Intermediate
CATIA V5 - Not Required - Intermediate
CAD - Not Required - Intermediate

EDUCATION:
Accredited AA or BS degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
8::00 AM - 4:30 PM

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

 
Job Number: 177277
Job Location: Kennedy Space Center, FL
Rate: $DOE
Duration: 9 Months
Input Date: 02/20/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter

Description:
CAD Drafter

Location: Cincinnati, OH
Duration: 10-11 months

Description:
Prepare clear and complete mechanical HVAC installation drawings from Sheet Metal or Mechanical contractor sketches and plans and process through CAD/CAM system for manufacturing by performing the following duties.

Candidate will do it:
- Must be capable of reading customer architectural and mechanical plans.
- Uses computer aided drafting (CAD) software to create drawings for customer and manufacturing processes. Drawings are based on designs and sketches provided by engineers or more experienced staff.
- Must be capable of reading and understanding customer requirements in the form of quotations and specifications and applying applicable ESM (CAD) details.
- Must have working knowledge of drafting fundamentals including orthographic views, standard dimensioning practices, scaling plus English and metric units of measure.
- Creates drawings involving checking dimensions of parts, documenting materials to be used, verifying form, fit and function of parts in assemblies.
- Follows direction and is capable of learning ESM drafting & HVAC standards.
- Developing a working knowledge of manufacturing processes, machines and various building materials.
- Processing and converting ESM (CAD) drawing packages through system CNC software for shop fabrication.
- Prepare shop floor bill of materials and paperwork for manufacturing departments.
- Work with scheduling department to plan and manage project releases into production schedules.
- Other duties may be assigned.

Required:
- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Associate's degree (A. A.) or equivalent from two-year college or technical school; or 1 to 3 years related experience and/or training; or equivalent combination of education and experience.
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general
public.
 
Job Number: 19-09262
Job Location: Cincinnati, OH
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 10 Months
Start Date: ASAP
Input Date: 06/27/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Designer / local only MN

Description:
165828 Job Title: Designer

Work Site Address: 4700 Nathan Lane N, Plymouth, MN 55442-2512
Job Number: (9378331)
Max Pay Rate: 30-35/hr max
Start Date: 8/12/2019
End Date: 5/11/2020
Position Type: Contract


Job Duties:
As a Designer your responsibilities will be to model fully defined components and assemblies efficiently using Pro/E / Creo 4.0, and create/update parametric drawings in conformance with ARDEC 3D modeling standards. You will work with other engineers, technicians, program managers and administrative personnel to accomplish assigned tasks.
Responsibilities include, but are not limited to:
• Accept work direction from other drafters/designers, engineers and manager on assigned project.
• Mechanical modeling utilizing Pro/E / Creo 4.0
• Create/update parametric drawings in conformance with ARDEC 3D modeling standards.
• Review work to ensure accuracy and completeness.//


Other Required Skills:
• Two years of mechanical design experience.
• Technical or Associate’s Degree in Mechanical Drafting/Design.
• 2 - 5 years of Pro/E / Creo experience with a minimum of 1 year utilizing Pro/E / Creo 4.0
• Ability to model fully defined components and assemblies efficiently using Pro/E / Creo 4.0
• Ability to create/update parametric drawings in conformance with ARDEC 3D modeling standards.
• Microsoft Office experience.

Preferred Skills:
• Possess an understanding of geometric dimensioning and tolerancing.
• Understanding of Teamcenter PLM toolsets.
• Exposure to production/factory floor environment
• Exposure to or interest in ammunition, reloading, or shooting sports.


Top 3 Skills: The ideal candidate will be a local, recent Technical or Associate’s Degree graduate in Mechanical Drafting/Design with 2 - 5 years of Pro/E / Creo experience and a minimum of 1 year utilizing Pro/E / Creo 4. They will be joining a team of 10 others.//


Location: Plymouth, MN//
Duration: 9 Month Contract to Hire, conversion dependent upon performance and workload.//
Interviewing ASAP//
 
Job Number: JK-9378331ATO
Job Location: Plymouth, MN
Rate: 30-35/hr max
Duration: 9 month CTH
Input Date: 07/31/2019
Last Updated: 08/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions:
1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods.
3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP).
5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions:
1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
2. Performs other duties as required. 



 


 



Education and Experience Requirements:

High school diploma/GED.
Two (2) years experience in wood finishing.
Experience in aerospace industry preferred.
Basic knowledge of cabinet finishing processes and products.



Other Requirements:
1. Possess a working knowledge of inspection and process specifications.
2. The ability to read, write, speak, and understand the English language.
3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
4. Must be computer literate.





 


 



 
Job Number: 1910104471
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/18/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTiIQAW&URLSource=cjhunter

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DRAFTING SUPPORT

Description:
Role: Drafting Support
Location: Vandenberg AFB, CA
Duration: 6+ months’ contract

Qualifications:
• Work duties will include creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
• Performing walk downs of projects to verify details will be required. Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital.
• Perform configuration management and drawing release functions.
Basic Qualifications:
• A minimum of 5 years of professional drafting experience.
• Experience with drafting electrical, mechanical and structural designs.
• Experience working independently and in a team environment.
• Proficient knowledge in Microsoft Office Suite.
• The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
• Have mastery of AutoCAD drawing program.
• Ability to read and interpret mechanical and electrical drawings and logic diagrams
 
Job Number: 19-04583
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 08/07/2019
Last Updated: 09/06/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Job Duties:

As a Designer your responsibilities will be to model fully defined components and assemblies efficiently using Pro/E / Creo 4.0, and create/update parametric drawings in conformance with ARDEC 3D modeling standards. You will work with other engineers, technicians, program managers and administrative personnel to accomplish assigned tasks.

Responsibilities include, but are not limited to:
• Accept work direction from other drafters/designers, engineers and manager on assigned project. • Mechanical modeling utilizing Pro/E / Creo 4.0 • Create/update parametric drawings in conformance with ARDEC 3D modeling standards. • Review work to ensure accuracy and completeness.

Other Required Skills:
• Two years of mechanical design experience. • Technical or Associate’s Degree in Mechanical Drafting/Design. • 2 - 5 years of Pro/E / Creo experience with a minimum of 1 year utilizing Pro/E / Creo 4.0 • Ability to model fully defined components and assemblies efficiently using Pro/E / Creo 4.0 • Ability to create/update parametric drawings in conformance with ARDEC 3D modeling standards. • Microsoft Office experience.

Preferred Skills:
• Possess an understanding of geometric dimensioning and tolerancing. • Understanding of Teamcenter PLM toolsets. • Exposure to production/factory floor environment • Exposure to or interest in ammunition, reloading, or shooting sports.

Required Education:
Associate's Degree in Mechanical Drafting/Design with 2-5 years of Pro/E/CREO Experience.
 
Job Number: 9378331-LL
Job Location: Plymouth, MN
Rate: up to $33/hr
Per Diem: Split
Overtime: Possible
Duration: 10 months
Start Date: ASAP
Input Date: 07/30/2019
Last Updated: 08/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Lavie Lam
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.
3. Applicants must have good CAD drawing and change order drafting skills.
4. Mechanical Drafter/Designers must have CREO2 experience.
5. Electrical Drafter/Designers must have experience with Cadence/allegro 17.2 or higher.

Education:
1. Associate's Degree
2. Must have 2+ years of experience with CREO 2 or Cadence/Allegro 17.2 or higher.
 
Job Number: 11188
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 07/16/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.
3. Applicants must have good CAD drawing and change order drafting skills.
4. Mechanical Drafter/Designers must have CREO2 experience.
5. Electrical Drafter/Designers must have experience with Cadence/allegro 17.2 or higher.

Education:
1. Associate's Degree
2. Must have 2+ years of experience with CREO 2 or Cadence/Allegro 17.2 or higher.
 
Job Number: 11137
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 06/26/2019
Last Updated: 08/26/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

Documentation Control Associate III

Description:
Creates and/or improves existing documentation procedures, and streamline across various product teams. Establishes and maintains consistency of databases and documentation as well as corporate processes used to ensure quality, design requirements, and environmental compliance. Manages and maintains as well as analyzes and interprets the consistency for all documentation and support systems to ensure quality. Follows established procedures and formats, researches and compiles technical data for use in routine documents or sections of documents such as manuals, procedures and specifications. Obtains data and information from review of documentation, drawings, schematics and reports, consultation with technical staff members.  Typically requires  5-7 years of experience.  Provides more technical/functional support than administrative support. Demonstrates a thorough working knowledge of technology, applications, terminology, and procedures required of job function. Performs varied and more complex tasks. Makes decisions within broad parameters.

SCOPE OF WORK

This position serves as a resource on the Project Management team and provides administrative and technical support for large capital projects managed by Our Client's PMT team. Experience with project management and collaboration systems is preferred.

Our Client' project management systems include:

•             SAP and SharePoint primarily; experience with these systems are preferred but not required.
•             Must have a functional understanding of electronic data management.
•             Functional understanding of project execution and phase gates is preferred.
•             Experience working on Alaska or other arctic projects is preferred.
•             Project support involves multiple tasks that are schedule driven. Strong organizational and communications skills are  critical to effectively supporting our clients. This position supports a wide area network of resources assigned to Our Clients projects.
•             Strong interpersonal skills are necessary to respond to various project support requests.
•             Training is provided on Our Clients project management systems. Experience with other project management systems is preferred.         

CategoryNameRequiredImportanceLevelLast UsedExperience 
CertificationsASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code for Materials (BPVC-II)Yes5     
EducationBachelor's Degree in Mechanical EngineeringYes2     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Piping CodesYes1     
GeneralOil and Gas IndustryYes3     
GeneralKnowledge of ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel (BPV) CodesNo5     
GeneralKnowledge of Heavy Industrial Manufacturing OperationsNo5     
SoftwareMS OfficeYes4     

Additional Competencies:• Knowledge of CPAI criteria and specifications
• Knowledge of ASME piping codes B31.3, 31.4, and 31.8 
• Knowledge of API piping inspection and repair (570)
• Familiarity with DOT, ADEC, and SPCC regulations
• Capable of performing pipe stress and flexibility analyses (preferably using AutoPIPE software)
• Good written and oral communication skills

 
Job Number: 1910104590
Job Location: Anchorage, Ak
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUAeQAO&URLSource=cjhunter

Door Design Engineer

Description:
PDS Tech, Inc. is seeking Door Design Engineer in Wichita, KS
  • Candidates will assist with developing, planning, organizing and conducting complex design assignments on  aircraft.
  • The candidate will perform duties as either an airframe design engineer or a systems design engineer. Airframe design engineers will take responsibility for planning, optimizing, and executing complex aircraft structural design assignments.
  • This will include the support of new product and sustaining designs and require coordination with multiple technical stakeholders. Initiate designs or incorporate design improvements utilizing CATIA software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts.
  • Communicate and coordinate with technical disciplines, such as Manufacturing, Tooling, Structural Integrity, Aerosciences and Utility Systems .
  • Peer drawing checking and the release of engineering documents, as well as day-to-day collaboration to resolve design conflicts and interferences.
  • Support of Space Reviews (i.e. CATIA V6 Model Management/Interference Checks).
  • Support prototype aircraft assembly, which includes coordination with Experimental Engineering to support design interpretation and occasionally investigate and respond to problems in manufacturability.
  • Build prototypes of systems components for testing; set up and run laboratory simulations.
  • Assist in the creation of test procedures and coordination of testing. Create presentations to convey test results, design issues, or trade study recommendations.
  • Support the investigation and response to customer field service issues

Required:
o Minimum 5 years aircraft structure and/or mechanical system design experience
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit)
o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design;
o ASME Y14.5 Geometric Dimensioning and Tolerancing
o Preferred: CATIA V6 and Enovia experience 

 
Job Number: 1910101915
Job Location: Wichita, KS
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gISQAY&URLSource=cjhunter

DrivMatic Operator

Description:
Drivmatic, Riveting, Assembly, Manual

RESPONSIBILITIES:
" Performs a variety of DrivMatic, riveting and structural assembly operations
" Performs structural assembly, riveting and inspection operations of major components and assemblies
" Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
" Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
" Adheres to all applicable safety and operational procedures and directives
" Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
" Keeps work areas clean and orderly
" May be required to perform other duties as needed

REQUIRED EXPERIENCE:
" Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
" Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
" Structural assembly, riveting and inspection operations of major components preferred
" Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 179646
Job Location: Stuart, FL
Rate: $20 to $25.00 DOE
Duration: 6+ Months
Input Date: 06/03/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer, you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a 'fail-fast' mentality (fail fast, fail often, react quickly and learn from every failure). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions. You will be expected to understand and coach technical concepts to those around you.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Interfaces with customers, suppliers, application users and other technical and support personnel.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 6 - 10 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with C/C++
• Experience with Software Configuration Management practices and tools such as Git
• Experience with software development practices including:
o Continuous Integration/Continuous Delivery (CI/CD)
o Agile Methodologies
o Test Driven Development (TDD)
o Design Principles

Preferred Qualifications
• 10+ years of work experience
• Technical leadership experience in a Software Engineering environment
• Experience with Python
• Experience with HW/SW Integration
 
Job Number: 19-06180
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a “fail-fast” mentality ( fail fast, fail often, react quickly and learn from every failure ). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions. You will be expected to understand and coach technical concepts to those around you.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. They apply the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Ground Software engineers interface with customers, suppliers, application users and other technical and support personnel to produce high quality software that meets stakeholder needs.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 4-8 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with Software Configuration Management practices and tools such as Git (preferred), SVN, or Perforce
• Experience with one or more of the following:
-Real Time Operating Systems like RTEMS, RTLinux, QNX, LynxOS, etc.
-Embedded solutions with timing and memory constraints
-Communication protocols, including Ethernet, Serial, MIL-STD-1553
-Software Model Development of Avionics and Physical Systems
-Microprocessors
-Modern web application development and tech stack, including REST APIs
-Microservices architecture
-Developing device drivers
-Hardware - software integration

Preferred Qualifications
• Experience leading in a Software Engineering environment.
• Experience presenting software architecture and designs to both internal audiences as well as external customers
• Experience working with UML
• Real-time, 6 degree-of-freedom, motion sim***tion experience
• Cloud Deployment (AWS)
• Experience with one or more of the following languages:
-C/C++
-Python
-Java
-Javascript
• Experience with software development practices including:
-Continuous Integration / Continuous Delivery (CI/CD)
-Agile Methodologies
-Test Driven Development (TDD)
-Design Principles
 
Job Number: 19-06181
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a 'fail-fast' mentality (fail fast, fail often, react quickly and learn from every failure). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. They apply the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Ground Software engineers interface with customers, suppliers, application users and other technical and support personnel to produce high quality software that meets stakeholder needs.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 2 - 6 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with C/C++
• Experience with Software Configuration Management practices and tools such as Git

Preferred Qualifications
• Experience with Python
• Experience with software development practices including:
• Continuous Integration/Continuous Delivery (CI/CD)
• Agile Methodologies
• Test Drive Development (TDD)
• Design Principles
 
Job Number: 19-06182
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

Ejection Seat Test Engineer

Description:
PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
 
We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
 
The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




 
Responsibilities:
  • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
  • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
  • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
  • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
  • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
  • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
  • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
  • Facilitate and execute necessary testing to ensure product safety.
  • Interact with Program Management to ensure customer satisfaction.
  • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
  • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
  • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
  • Adhere to all rules and codes of conduct.
  • Perform other duties as required.

Skills Required:

  • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
  • Detail oriented and thorough in all assigned tasks
  • Innovative and driven to complete all assigned tasks to the project schedule.
  • Strong customer skills and customer focus (both internal and external customers)
  • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
  • Ability to work independently or as part of an integrated product team.
  • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
  • 100% dedicated to following all safety procedures and precautions.
  • Excellent interpersonal skills.
  • Excellent written and verbal communication skills
  • Ability to present test solutions
  • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

Education:

  • Bachelors.

 
Job Number: 1910101206
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 04/17/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

Electric System Component Outfitting Interface Engineer

Description:
This position is located in Nagoya, Japan.

Electric system component outfitting interface engineer
  • Mechanical/ structural interface engineering expertise
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044922
Job Location: Nagoya,
Duration: 36 months
Input Date: 07/19/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Keith Zingler
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000037FjAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer ( Dulles, VA ) 9376347

Description:
Electrical Designer ( Dulles, VA ) 9376347
6 month Contract

Design of printed wiring boards using Cadence Allegro. Experience reading and generating electrical schematics. Experience with PWB fabrication drawings.
Team: Typically supporting a group of four, consisting of an Electrical Engineer, Electronics Packaging Engineer, Manufacturing Engineer and Mechanical CAD Designer in the development of the PWB design.
Design of printed wiring board (PWB) using Cadence Allegro. Working closely with Electrical Engineer to document and update electrical schematics.
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.

•Cadence Allegro EDM experience preferred
•Experience with Constraint Manager Preferred
•Experience reading and generating electrical schematics
•Experience with PWB fabrication drawings
 
Job Number: 9376347
Job Location: Dulles, VA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 08/08/2019
Last Updated: 08/15/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Work with Electrical and Mechanical Engineers to design and document company’s products while following established design and documentation standards.
Translate concept drawings, wiring diagrams, verbal descriptions, and sketches into detailed electrical and/or models and drawings in support of specific program tasks including
electrical bundle routing in the spacecraft
l
Efforts will include assessment structural, environmental, and manufacturability considerations, including tolerance evaluation to reduce costs and schedule impact for all design
efforts, while ensuring compliance with NASA and SNC standards or best commercial practices (as appropriate) as well as contractual requirements.
l
l Develop harness bundle assembles using Siemens NX11 Electrical Harness Module and data / intelligence imported from Siemens Mentor Graphics Capital Logic.
l Develop light weight secondary structures and harness support bracket parts that comply with both mechanical and electrical requirements for the specific applications.
Will generate and launch Engineering Change Orders (ECO) and Engineering Change Notifications (ECNs), with associated documentation, into a Configuration Management (CM)
system (i.e. Windchill).
 
Job Location: CO
Input Date: 08/07/2019
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/31/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
1) AutoCad required, Catia V5 and CHS preferred.
2) GV,GVI, electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374101
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 09/23/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Engineer in Auburn Hills, MI.

Summary:

  • Develop, validate and integrate the functionality of e-motor hub system, dynamic lean system, integrated display unit, and sensors.
  • In charge to integrate the software platform for infotainment, vehicle performance monitoring, torque and power distribution
  • Development of the powertrain sensors and controllers
  • Development of the strategy for the dynamic lean system; step by step electrical motor to balance the vehicle under specific conditions and loads
  • Lighting/signals subsystem development

Qualifications/Education:
  • Bachelor’s degree in Electrical or Mechanical Engineering.
  • 5+ years’ experience and capability to work with various data acquisition tools.
  • 5+ years’ experience with Matlab or equivalent tools.
  • 5+ years’ experience with sensor development.
  • 5+ years’ experience with controls.
  • Strong mechanical understanding or Mechanical engineering background with strong electrical understanding is preferred.
  • Must be able to manage multiple concurrent assignments with proper prioritization.
  • Excellent interpersonal and collaborative skills are necessary to be successful in this position.
  • Proactive approach to evaluate efficient and innovative solutions even to quickly troubleshoot urgent situations.

 
Job Number: 1910102060
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjUQAQ&URLSource=cjhunter

Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Technician 2

Description:
Chipton-Ross is seeking an Electrical Technician 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

REQUIRED EXPERIENCE:
Integrated Circuit Layout Technician.
Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10
Full-Time

 
Job Number: 179458
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 05/22/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

Electro-Mechanical Designer (CREO Cabling)

Description:
PDS Tech is seeking an Electro-Mechanical Designer in Florence SC.
 
The Electro-Mechanical Designer position is responsible for modeling and drawing generation of a wide range of Electro-Mechanical hardware and components designed for use in Elevator Systems (Creo 3.0 Cabling knowledge required).
 
The candidate should not only be adept at handling typical design tasks (modeling and detailing) but must be able to effectively communicate cross-functionally.  The Designer will be a member of the Design Services Group operating out of Florence South Carolina that is home to the North American System Elevator Engineering, Manufacturing, and Supply Chain operations.
 
Preferred Experience Requirements:
  • 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in Electro-Mechanical designs.
  • Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
  • Ability to apply GD&T to parts and assemblies per design requirements.
  • Ability to perform Tolerance Analysis calculations.

Regular Experience Requirements:

  • Strong communications skills.
  • Ability to work effectively within a team environment.
  • High energy and passion for innovation and creativity.
  • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).

Education:

  • Associates Degree.

 
Job Number: 1910101762
Job Location: Florence, SC
Duration: 24 months
Input Date: 05/09/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fxwQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Designer (CREO Cabling)

Description:
The Electro-Mechanical Designer position is responsible for modeling and drawing generation of a wide range of Electro-Mechanical hardware and components designed for use in Elevator Systems (Creo 3.0 Cabling knowledge required).

The candidate should not only be adept at handling typical design tasks (modeling and detailing) but must be able to effectively communicate cross-functionally. The Designer will be a member of the Design Services Group operating out of Florence South Carolina that is home to the North American System Elevator Engineering, Manufacturing, and Supply Chain operations.

Preferred Experience Requirements:
• 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in Electro-Mechanical designs.
• Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
• Ability to apply GD&T to parts and assemblies per design requirements.
• Ability to perform Tolerance Analysis calculations.

Regular Experience Requirements:
• Strong communications skills.
• Ability to work effectively within a team environment.
• High energy and passion for innovation and creativity.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
 
Job Number: 1910101762
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 09/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 09/20/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 2 - 6 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with C/C++
• Experience with Software Configuration Management practices and tools such as Git
• Experience with Python
• Experience with software development practices including:
• Continuous Integration/Continuous Delivery (CI/CD)
• Agile Methodologies
• Test Drive Development (TDD)
• Design Principles

Preferred Qualifications
• Experience developing software that controls mechanical hardware (e.g. Valves, actuators, regulators, heaters, hydraulics, pumps) autonomously and/or manually via GUI
• Dual degree Mechanical/Aerospace Engineering Degree & Computer Science
 
Job Number: 423
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 08/02/2019
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Job Number: 165661

Roles and Responsibilities
Our client is seeking an Engineering Technician with relevant aerospace industry experience working on small, medium and/or large government and commercial programs. Must be able to read and follow written instruction as well as interpret and apply technical drawing views and notes.

**Team: Our Technician Team is sitting at approximately 20 strong. This role will start with training and bringing up to speed with our processes working side by side with experienced technicians and/or Engineers on mechanical assembly and testing. Worker should be able to work with others or independently.

Qualifications and Education Requirements
• Must be organized and accountable for personal workload.
• Must be diligence in maintaining paperwork associated with hardware assemblies so as to maintain traceability.
• Requires experience following procedures but also able to work with engineers to create new processes.
• Knowledgeable with structural bonding and application of coatings using various epoxy and silicone adhesive products.
• Working level understanding of force, torque, and precision hand tools.
• Organizational ability to follow, or determine, optimum order of assembly for complex structures and devices.
• Familiarity with electrical harness assemblies is preferred, including ability to interpret and work to electrical assembly schematics as well as basic electrical tests such as continuity and insulation resistance.
• 4 years or more documented experience in technical work. Aerospace experience preferred.
• High school diploma or equal - Junior college, trade school or university preferred. micrometers.

The majority of the work will involve: Mechanical assembly including threaded fastener and adhesive bonding using hand tools like torque wrenches, digital levels, calipers, force gauges. Some of the work for more skilled applicants could include: Electrical assembly including soldering (Jstd space addendum preferred), harnessing (crimping, connectorizing, dressing) The materials for the work will be composite panels, solar cells, and machined parts.
 
Job Number: 165661
Job Location: Goleta, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Contract to Hire
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Minja Schmelzl
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/26/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's for openings in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

FULL TIME/2ND SHIFT
WORK HOURS: 3:30 PM - 12:00 AM

MISCELLANEOUS:
Mechanic will receive basic assembly training for 2 - 4 weeks, depending on work station assigned.
 
Job Number: 179979
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 06/18/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Facilities Maintenance Technician

Description:
Basic Carpentry, Plumbing, HVAC, Hand Tools, Power Tools

RESPONSIBILITIES:
The FMT will be responsible for performing routine repairs and maintenance and will assist as directed with more complex maintenance and repairs of Client's facilities and equipment. The FMT will also perform basic carpentry, plumbing, HVAC or associated work on Client facilities using hand and power tools as directed and will troubleshoot equipment or facilities problems and report to the Facilities Supervisor.
" Follow preventive maintenance procedures on all plant equipment in a timely and thorough manner; logging all activities routinely in the facility maintenance log.
" Maintain the operation of equipment and systems in the areas of responsibilities such as compressed air, vacuum, dust collection, electrical distribution, refrigeration, security and fire protection.
" Participate in planning, ordering, installing and training for new equipment.
" Trouble shoot and perform diagnostics on damaged or malfunctioning equipment; make repairs where necessary or recommend to the Facilities Supervisor to arrange for outside vendor to service equipment.
" Respond immediately to emergency situations (fire, security, evacuation, power and equipment failure, etc.).
" Comply with all applicable codes, regulations, governmental agency and company directives as relates to building operations and practice safe work habits.
" Performs basic carpentry, mechanical, plumbing and painting of facilities.
" Performs other duties and responsibilities as required.

REQUIRED EXPERIENCE:
" 4+ years of related work experience
" Must be able to work 7:00 am to 4:30 pm or later, four to five days a week
" Good interpersonal skills, with Good written/verbal communication skills
" Excellent attention to detail with the ability to prioritize and consistently meet deadlines
" Able to successfully keep multiple tasks running simultaneously with strong analytical skills
" Able to provide constructive feedback and creative solutions to problems.
" Responsible, flexible, fast learner that has the ability to be a self-starter with a willingness to learn new things.
" Strong mechanical skills on electric motors, vacuum pumps, air compressors, HVAC, electronic controls, etc. preferred.
" Electrical and plumbing experience preferred but not required
" Physically able to unpack, pack, lift, and transport boxed items weighing up to 50 pounds, occasionally lift and move 50+ lbs with assistance.
" Must be able to work at heights of 20 feet' or more and comfortable working in confined spaces.
" Ability to accurately follow operation manuals, manufacturing and installation instructions, sketches, blueprints and diagrams.
" Strong computer skills, including Microsoft Word and Outlook
" On Call Coverage to support team as needed
" Holds and able to maintain a valid California driver's license and will be driving own vehicle within client sites (will need proof of insurance).

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift, 7:00 am to 4:30 pm
Full-Time


 
Job Number: 179224
Job Location: Mojave, CA
Rate: $14.9 to $19.61 DOE
Duration: 2 Months
Input Date: 07/20/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Facilities Plant Engineer 2

Description:
Buildings, Equipment Installations, Utility Systems, Building Codes, Regulations, Construction Principles

RESPONSIBILITIES:
Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Aligns architectural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Assists others to integrate the activities of multiple engineering disciplines, outside consultants and government agencies. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Aligns civil/structural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Assists others to facilitate the implementation of basic, routine improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Aligns electrical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Aligns mechanical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. With limited supervision, ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. With limited supervision, supports or manages construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. With limited supervision, prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.With limited supervision, produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. With limited supervision, translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Assists with updating design standards and site-specific operating procedures in order to establish common practices. With limited supervision, provides input to infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.With limited supervision, collects customer requirements. Participates in conceptual design by analyzing intended use/occupancy and desired aesthetics, code research, and the development of preliminary design elements. Participates in projects requiring interdisciplinary engineering support. Estimates resource costs/requirements, identifies materials, equipment, and services, and develops preliminary project schedule in order to establish project scope. With limited supervision, plans, manages, and executes projects or selected project elements. Acquires and modifies assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations. With limited supervision, interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

EDUCATION:
Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

 
Job Number: 178098
Job Location: Chantilly, VA
Rate: $DOE
Duration: 12 Months
Input Date: 03/21/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Facilities Project Engineer

Description:
Facilities Project Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The candidate will provide professional facility engineering and project management experience to designated projects and assignments.

The candidate will be responsible for the design, development, verification and documentation of the mechanical infrastructure and equipment used in fabricating, assembling, testing and inspecting products.

Bachelors degree required

Additional:
The candidate must work well with all functional groups and good communications skills at all levels are required. Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel. Projects range from small single tasks to larger scale construction projects including facility upgrades, facility renovations, special projects, and managing equipment installation. The candidate will assist in the selection and contracting process of consultants and construction teams as necessary for each project Provide hands-on involvement with equipment and processes by being available to the operators, maintenance personnel, and other Facility Engineers and gaining intimate knowledge of processes Manage capital projects on time and within budget
 
Job Number: 11082
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/11/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: sspolzino@pdstech.com
Website: www.pdstech.com

Facility Construction Project Manager (Aerospace)

Description:
PDS Tech is seeking a Facility Construction Project Manager in Windsor Locks, CT
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.
The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

 
 
The candidate must work well with all functional groups and have good communications skills at all levels are required. 
Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.
Projects range from small single tasks to larger scale construction projects including:
  • Facility Upgrades,
  • Facility Renovations,
  • Special Projects, and
  • Managing Equipment Installation.

 The candidate will:

  • assist in the selection and contracting process of consultants and construction teams as necessary for each project,
  • provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
  • gain intimate knowledge of processes and
  • manage capital projects on time and within budget

Education:

  • Bachelors.

 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jyoQAA&URLSource=cjhunter

Facility Operations Analyst

Description:
Chipton-Ross is seeking a Facility Operations Analyst for an opportunity in Fort Bragg, NC

RESPONSIBILITIES:
Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.
Servicing of customers' HVAC systems on the job site.

Ordering materials, tools and instruments

Preparing reports and maintaining records on equipment and preventive maintenance

Completing required paper work timely and accurately

Troubleshooting equipment failures both in service center and on customer locations

Installing, maintaining and repairing electronic pneumatic devices related to HVAC control

Practicing and promoting safe working conditions in accordance with OSHA, and other required regulations

Maintain chillers.

Assuring that heating, ventilation and air condition systems are operating in accordance with manufacture's specifications.

Servicing water softener and check for proper operation of hot water and steam boilers

Servicing HVAC and exhaust systems, fan blowers, including filters, lubrications, thermostats, and controls for the entire building.

Servicing all building components including all physical, structure and mechanical equipment.

REQUIRED EXPERIENCE:
Must be a certificated HVAC technician.

Must be able to pass CRC Physical/Medical assessment.

EDUCATION:
Accredited High School Diploma/GED


MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 180468
Job Location: Fort Bragg, NC
Rate: $DOE
Duration: 2 MONTHS
Input Date: 07/17/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Facility Operations Analyst / certified HVAC technician required - Clearance NC

Description:
165719
Job Title: Facility Operations Analyst

Work Site Address: Fort Bragg, NC 28303
Job Number: 1811-1
Max Pay Rate: $24.50/hr
Start Date: 9/16/2019
End Date: 11/17/2019
Position Type: Contract

Job Summary:
Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Job Description:
Servicing of customers' HVAC systems on the job site.
Ordering materials, tools and instruments
Preparing reports and maintaining records on equipment and preventive maintenance
Completing required paper work timely and accurately
Troubleshooting equipment failures both in service center and on customer locations
Installing, maintaining and repairing electronic pneumatic devices related to HVAC control
Practicing and promoting safe working conditions in accordance with OSHA, and other required regulations
Maintain chillers.
Assuring that heating, ventilation and air condition systems are operating in accordance with manufacture's specifications.
Servicing water softener and check for proper operation of hot water and steam boilers
Servicing HVAC and exhaust systems, fan blowers, including filters, lubrications, thermostats, and controls for the entire building.
Servicing all building components including all physical, structure and mechanical equipment.

Qualifications and Education Requirements
Must be a certified HVAC technician.
Must be able to pass CRC Physical/Medical assessment.
BS+0-2 YRS

Qty 1 position needed

In need of a HVAC Technician for commercial facilities. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1811-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 3 months
Input Date: 07/18/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Flight Controls Design Engineer

Description:
PDS Tech, Inc. is seeking a Flight Controls Design Engineer in Wichita, KS

Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25 Textron Aviation aircraft.
Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports.
Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents.
Troubleshooting activities in both production and field environments. Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
Coordinate with other Engineering disciplines such as Airworthiness, Project, Flight Test, Aerosciences, Propulsion, Avionics and Electrical, Flight Controls, Landing Gear and System Safety and/or the FAA.
Required:
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o 14 CFR Part 23/25 aircraft flight Controls design experience, 5 years minimum
o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design
o Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing
o Preferred: CATIA V6 and Enovia experience 

 
Job Number: 1910101910
Job Location: Wichita, KS
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gHyQAI&URLSource=cjhunter

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post-flight data.
Make assessments to ensure the safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years of relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning, and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 08/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are currently seeking experienced Flight Test Engineers to fill an opening for a company in Moses Lake, WA. The ideal candidate for this position should have 5 plus years relevant work experience related to experimental flight test operations and familiarity with FAA Part 25 or Part 23 certification.

Responsibilities of the Flight Test Engineer

Supporting engineering teams with test plan creation.
Discussing, writing and reviewing test cards and test hazard analysis.
Supporting and leading test preparation activities, test execution and post-test activities.
Supporting and leading pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft.
Process, analyze and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements of the Flight Test Engineer

5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Input Date: 08/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$28/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 11296
Job Location: Windsor Locks, CT
Rate: 28.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/07/2019
Last Updated: 08/26/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

Flight Test Manager

Description:
PDS Tech Inc. is seeking a Flight Test Manager, Regional Jet Development Project.
This position is located in Moses Lake, WA.

SCOPE:



The Flight Test Team Manager will be assigned with an Aircraft and be responsible for Flight Test Vehicle (FTV) Work Scope, Performance, Execution and Scheduling of the assigned aircraft. Flight Test Team Manager will be responsible for managing initiation, planning, and execution of flight tests and ensuring completion of the flight test within the given schedule. 

The Flight Test Team Manager’s responsibilities include, but not limited to, the following:



  • Assign work, goals to the FTV team members
  • Ensure Test Readiness, Deliverables are on track
  • No injuries or accidents
  • Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance)
  • Update and present short term schedule (90 days) to Functional Leads weekly
  • Manage the entire FTV schedule through certification
  • Provide daily and weekly FTV status
  • Ensure support for short term schedule activities via Functional Leads
  • Resolve issues with Functional Leads

Flight Test Managers have authority for the following:

  • Setting aircraft configuration, schedule, testing and maintenance goals
  • Implementing process improvements directly related to their FTV

¨  Bachelor of Science degree, or equivalent education and experience, in Aeronautical, Mechanical, or Electrical Engineering, Physics, Mathematics or Computer Sciences from an accredited institution.
 
¨  Must have 15 years of related experience with a minimum of 10 years or more of space flight test experience as described above. .
 
¨  Must be legally able to work in the US.
 
¨  Professional experience in a multilingual and multi-cultural environment.
 


 
Job Number: 1810080780
Job Location: Moses Lake, WA
Duration: 36 months
Input Date: 11/12/2018
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002diwyAAA&URLSource=cjhunter

Flight Test Mechanical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Extensive Catia V5 and SmarTeam experience required.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-332
Job Location: Savannah, GA
Rate: $70 to $ $80
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Functional Safety Engineer

Description:
PDS Tech, Inc. is seeking a Functional Safety Engineer in Auburn Hills, MI.

Summary:

  • The Automated Driver Assistance System Safety Engineer will be involved with the development of the future semi and fully automated driver assistance systems and enablers, this may also include enhancements to existing driving assistance systems such as Adaptive Cruise Control, Forward Collision Warning, Lane Keep Assist and Blind Spot Monitor or future electrical architectures to support more advance systems.
  • The Engineer is responsible for performing functional safety analyses and executing related tasks for FCA automated vehicles.
  • This includes performing vehicle and system level hardware and software analysis to identify potential safety impacts, developing safety requirements and supporting other activities in accordance with the FCA Functional Safety Engineering Process.  
  • Some of the specific activities development of Automotive Safety Integrity Level (ASIL) for features via hazard analysis, safety plans, safety cases, and other ISO 26262 work products. In addition, the engineer will interface with other vehicle teams and suppliers.
  • The candidate must have the desire to learn new processes and technologies.

Summary of Position Responsibilities include by not limited to:


  • Perform, support and/or manage the execution of System Safety tasks,


  1. Safety concept and safety program plan.
  2. Safety requirements and traceability.
  3. Support validation and verification team in DVP development and execution.
  4. Safety case development.


  • Participate in design discussions to ensure that the safety requirements are implemented and adequate.
  • Support design activities, CCA/CCM/DFMEA.
  • Support both in house and supplier lead development.
  • Support product development as member of cross functional team.
  • Review supplier functional safety deliverables to assure FCA requirements are supported.
  • Participated or Lead safety reviews of functional safety process work products.
  • Coach engineering teams on functional safety process.
  • Teach classes to FCA employees on functional safety process and analysis.
  • Actively participate in functional safety workgroups, as assigned, to support development or improvement in processes.

Prerequisites:


  • Bachelor of Science degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university accredited university.
  • 5 years of related engineering experience.
  • 2 years within the area of functional safety.
  • Proven ability to apply the V-model development process.
  • Competency in Systems Engineering – Active Controls, Communications Protocols.
  • Understanding of automotive vehicle systems.
  • Proven competency in Functional Safety and/or System Safety.
  • Trained in both DVP&R and DFMEA creation and execution.
  • Good problem solving, communication, and interpersonal skills.

Preferred Requirements:

  • Master’s degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university.
  • Understanding of Safety of the Intended function (SOTIF).
  • Trained and certified in ISO26262.
  • Experience in Fault Tree.

      


 
 
Job Number: 1910103748
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 07/11/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRMXQA4&URLSource=cjhunter

Heavy Equipment Design Team Lead

Description:
*This is a full time, 2 year contract, located in York, PA*



We are hiring for a Design Team Lead, who will be working on Military Recovery Vehicles designing parts of the vehicle like stowage, AFES, recovery equipment (Winches, Boom, Spade), hydraulic subsystems, braking,steering and other operator controls such as heater, auxiliary power unit, engine and fuel systems. This project is for helping with the M88 modernization program.



Contrator's role will be that of the go to, IPT, small team project lead who will analyze, design, select materials, work with BOMs, work with CAD applications, create and adhere to schedules/milestones, budget, work with part specifications/procurement, supplier management.



Required:

*4 years experience designing mechanical hardware including brackets, covers and seals working on heavy construction equipment or other off-road equipment.

*Experience leading small design teams

*Understanding of ASME 14.100/Y14.5; Understanding of BOMs

*Familiar with part selection processes, working with procurement and sourcing of materials from appropriate venders

*BSME or similar Engineering Degree



Pluses:

*DoD experience/or working on military vehicles.

*Experience in the development and design of on-vehicle stowage provisions for equipment such as maintenance tools, deep water fording kits or other vehicle operator controls like braking, steering, shifting, throttle, and suspension control

*Familiar with developing and designing Stowage of special equipment
 
Job Number: 915
Job Location: York, PA
Rate: $49.20
Per Diem: yes split
Duration: 2 year
Input Date: 08/09/2019
Last Updated: 09/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Hydraulics / Pneudraulics Maintenance / wheels and tires SC

Description:
1886-1 Hydraulics/Pneudraulics
Work Location: Greenville, SC
Status: Open

This position requires AIRCRAFT Hydraulics maintenance experience.

Qty: 1
Desired Start Date: 8/16/2019
End Date: 1/4/2020

Job Description:
The hiring manager is looking for people that have knowledge and understanding of the basic operations of aircraft hydraulics. This position will not necessarily be doing hydraulic operations 24/7 but will instead spend most of the time (not all) manufacturing hydraulic and oxygen lines, tear down and build up of wheels and tires, hydraulic fuel sampling, and working on hydraulic support equipment used on aircraft.

Aircraft Hydraulics maintenance. Performs test and checkout of mechanical, electrical, propulsion, structural, hydraulic subsystems and complete systems located at field locations away from primary company operations. Verifies and corrects such things as welds, sheet metal assemblies, controls, alignment of equipment.

Fabricates Fluid lines and Cables
Build up of wheels and tires
Performs Test Bench Checkouts and Testing
Hydraulic Fluid Sampling

Contractor must be willing to learn and be trained.
Hydraulic experience is required


Pay Rate: $25.00 - $29.00 Hourly

Skills Required
Areas of Expertise Hydraulics Yes 1 2 - 4 Years
Areas of Expertise Wheels No 2 < 1 Year
 
Job Number: JE-1886-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 5 months +
Input Date: 08/22/2019
Last Updated: 09/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 04/12/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Inspection & Quality

Description:
Supports, performs, and manages testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations as well as lean initiatives within manufacturing operations.
Some local travel will be required to conduct monthly testing at facilities located in Bridgeport CT and Shelton CT. Typically travel is limited to once or twice per month for each offsite location.

The technician will be working in the Materials & Process Quality Laboratory.

The role will include the preparation of metallic and composite samples using basic machining equipment to perform ASTM type testing on raw materials as well as production part samples.

Typical analyses performed include testing of chemical processing lines, metallographic testing, composite material testing, metallurgical testing, raw material specimen preparation, fluid testing, and oven and autoclave system accuracy testing.

Basic Qualifications:

High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical tasks.

- Experience working in a laboratory/manufacturing environment.

- Strong work ethic.

- Comfortable working with computers and the Microsoft suite.

- Strong reading comprehension skills including the capability to interpret engineering specifications and test procedures

- Strong communication skills needed to support a team-based work environment.

- Strong organizational skills with the ability to manage in a fast-paced environment with competing priorities

- Ability to follow written work instructions required.

- Off-shift work and overtime may be required to support business needs.

Desired skills:

- Knowledge of Basic Chemistry

- Familiarity with oven surveys

- Experience working in a laboratory environment

- Experience performing tests in accordance with ASTM and/or AMS standards

- Experience working in the Aerospace industry or at a NADCAP accredited organization

- Mechanical aptitude

- Familiarity working with basic hand tools

- Experience making composite layups
 
Job Number: 374292
Job Location: Shelton, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 06/18/2019
Last Updated: 08/23/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Test Engineer

Description:
Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
 
Job Number: 50420
Job Location: Windsor Locks, Ct
Duration: 12 months
Start Date: ASAP
Input Date: 08/13/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Test Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns. Experience with advanced instrumentation and data acquisition systems is required. Experience should also include two plus years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required.
 
Job Number: 50423
Job Location: Windsor Locks, Ct
Duration: 12 months
Start Date: ASAP
Input Date: 08/07/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 04/22/2019
Last Updated: 09/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear and Hydraulic Systems Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-038
Job Location: Greensboro, NC
Rate: Up to $70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER

Description:
Role: : MECHANICAL ENGINEER
Location: Centennial, CO
Duration: 6+ months contract
Job Description:
1. Strength Engineer to conduct strength analysis for structural design for the launch vehicle upper stage.
2. The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies.
3. Finite element analysis will use NASTRAN/FEMAP. Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.
4. Knowledge of superelements will aid in efficient non-linear analysis.
5. Need someone with a min of 8 yrs exp
 
Job Number: 19-04510
Job Location: Centennial, CO
Per Diem: No
Overtime: No
Duration: 06 months
Start Date: ASAP
Input Date: 07/09/2019
Last Updated: 09/06/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Description:
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews
Willingness to support weekend shift operations
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Is consulted extensively by associates and others as a recognized authority within the field
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
Has an approach to problem solving, balances technical product cost, and scheduling
Works without appreciable direction; work is reviewed from a long-range perspective for desired results
Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product


Qualifications:
Bachelor's Degree in engineering, Mechanical, Aerospace, or similar engineering discipline or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with a bachelors degree. Experience credit considered for related advanced degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required
Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.
 
Job Number: 309
Job Location: Mojave, CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/14/2019
Last Updated: 08/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Machine Operator

Description:
Are you looking for a great place to work and gain hands on experience? PDS Tech is recruiting for a client of ours in Hollister/Monterey Bay area. Their company has a real impact on space exploration, homeland security and the nation's defense.

Every employee is an integral part in delivering program success. They offer the opportunity to work on teams of highly skilled professionals to solve some of the most challenging and exciting problems we face today. We are looking for those who are ready to reach the peak of technology.​

  • Support Overtime as required or scheduled by Supervisor.
  • Must have knowledge in the use of basic mechanical measuring tools (micrometers, microscopes, calipers, thread gages, etc.).
  • Perform dimensional and visual inspections of linear flexible explosive product during the manufacturing process using basic measurement tools using established procedures with minimum supervision.
  • Perform basic hands-on machine setup procedures and select machine dies and parts, according to specifications.
  • Install dies and other tooling into processing machines for subsequent processing.
  • Load the extruder with plastics that feed the machine according to production line requirements.
  • Recognize and replace worn dies when products vary from specifications.
  • Spool processed products into rolls of specified lengths and weights.
  • Troubleshoot, maintain, and make minor repairs to machine equipment.
  • Maintain clean work areas.
  • Adjust controls to process materials into specified shapes and diameters.
  • Process explosive materials remotely on various types of equipment; Swagers, Form Mills, Square Chuck, Yoder, Draw Bench, Stationary Swager, and Extruder.
  • Process energetic powder from free flowing to pelletized material using a Stokes Rotary Press.
  • Must possess the ability to interpret basic drawings and instructions.


 
  • Education Required:     High school diploma or equivalent.
  • Experience Required:    0-3 years related experience; 

 
Job Number: 1810089357
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/09/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgVGAAY&URLSource=cjhunter

Machinist

Description:
Chipton-Ross is seeking a Machinist for an opportunity in Jacksonville, FL.

RESPONSIBILITIES:
The Machinist produces replacement parts and new parts in making repairs of metal parts of mechanical equipment. Work involves most of the following: interpreting written instructions and specifications, planning and laying out of work, using a variety of machinist's hand tools and precision measuring instruments, setting up and operating standard machine tools. This incumbent is responsible for the shaping of metal parts to close tolerances, making standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining

REQUIRED EXPERIENCE:
knowledge of the working properties of the common metals, selecting standard materials, parts, and equipment required for this work; and fitting and assembling parts into mechanical equipment, normally requires a rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift

 
Job Number: 180626
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 MONTHS
Input Date: 07/23/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Michael Olivarez
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: molivarez@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Tulsa, OK.

Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 


 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. 
 



Unique Skills:



Experience in a composite fabrication/bonding environment preferred.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


 
Job Number: 1910100438
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 03/25/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Groenewold
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033c7pQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11272
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/02/2019
Last Updated: 08/30/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
The Manufacturing Engineering position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate:
• will create manufacturing assembly documentation, concept tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
• must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• must be able to perform cost estimates, work to schedules, and write procedures and policies.
• must be able to review drawings and concepts and resolve producibility concerns.
• must provide technical support to the manufacturing facility as well as to the external suppliers.
• will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• must be able work well in an integrated product development/ design environment.
• will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• must possess a positive attitude and be able communicate well with staff, IPD teams & management.

Required
• Candidate must have 5 to 7+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Desired
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree
• Experience with an MRP (Manufacturing Resource Planning) system is desirable.
• Experience should include working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
 
Job Number: 1910104807
Job Location: Windsor Locks, CT
Per Diem: Not Available
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/01/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Manufacturing Engineer

Description:
Chipton-Ross is seeking a Manufacturing Engineer for an opening in Canoga Park, CA.

RESPONSIBILITIES:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

REQUIRED EXPERIENCE:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Level 3: Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Level 4: Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.

PREFERRED EXPERIENCE:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) . -Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.

EDUCATION:
Accredited Bachelor's degree in an appropriate discipline

WORK HOURS:
9/80, 2nd Shift
Full-Time

 
Job Number: 179798
Job Location: Canoga Park, CA
Rate: $DOE
Duration: 6 Months
Input Date: 07/29/2019
Last Updated: 09/23/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/27/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Engineer

Description:
PDS Tech is seeking a Manufacturing Engineer in Windsor Locks, CT
 
The Manufacturing Engineering position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.
 
The Candidate:
  • will create manufacturing assembly documentation, concept tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
  • must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
  • must be able to perform cost estimates, work to schedules, and write procedures and policies.
  • must be able to review drawings and concepts and resolve producibility concerns.
  • must provide technical support to the manufacturing facility as well as to the external suppliers.
  • will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
  • must be able work well in an integrated product development/ design environment.
  • will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
  • must possess a positive attitude and be able communicate well with staff, IPD teams & management

Required
  • Candidate must have 5 to 7+ years of experience working on the manufacture of complex mechanical systems.
  • Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Desired

  • Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree
  • Experience should include working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
  • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
  • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
  • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
  • Experience with an MRP (Manufacturing Resource Planning) system is desirable.

 
Job Number: 1910103672
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 06/18/2019
Last Updated: 09/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQlKQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10873
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10863
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1546-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 6/3/2019
End Date: 11/22/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
Rate Details

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1546-1S
Job Location: Lexington, KY
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1549-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 1
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions

Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1549-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-353
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
Experience in a composite fabrication/bonding environment preferred.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-365
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Background in structures planning preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11053
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 06/04/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II - 374098

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vend