Job Search Results

830 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:57AM Pacific Time by ContractJobHunter. )

Listings 1 - 830

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Electrical Engineers Needed

Description:
2 openings for Electrical Engineers to support an A321 passenger to freighter conversion / Dragon program.

They will be onsite in Wichita, KS. Period of performance is ~5 months each assuming a start in the next few weeks. We can accommodate a wide variety of skills, but they will need to have some experience with Airbus doing electrical Wire Diagrams, Wire routing, and potentially some experience doing electrical based reports supporting certification. Primary CAD package they will use is AutoCad. Someone with 5 years’ experience or greater is acceptable.


The Structures Company LLC is an AA/EOE.
 
Job Number: 512
Job Location: Wichita, KS
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: No
Duration: 5+ Months
Start Date: ASAP
Input Date: 09/28/2021
Last Updated: 12/21/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Manufacturing Engineer II Needed

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $27-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 04/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
8 Electrical Engineers Needed w/ AutoCAD

Description:
• Experience with AutoCAD
• Must have aircraft experience
• Experience with modification special mission work, radio integration and sensor integration.
• Must be US Citizens




The Structures Company LLC is an AA/EOE.
 
Job Number: 486
Job Location: Denver, CO
Per Diem: Possible
Duration: 6 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/17/2021
Last Updated: 08/30/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - 2nd Shift

Description:
An Advanced Engineering Technician 2nd Shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician 2nd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics.
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems.
* Conducts, analyzes and documents statistically based experiments to define process parameters.
* Implements and documents complex solutions for process improvement.
* Designs and constructs basic tooling and fixtures to accomplish unique tasks.

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.
* Solid knowledge and proficiency in the use of fabrication tools.
* Ability to fabricate complex hardware.
* Solid knowledge of generally accepted technical theory.


If you are interested in this Advanced Engineering Technician 2nd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316095
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 10/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - 3rd Shift

Description:
An Advanced Engineering Technician - 3rd Shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician - 3rd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems
* Conducts, analyzes and documents statistically based experiments to define process parameters
* Implements and documents complex solutions for process improvement
* Designs and constructs basic tooling and fixtures to accomplish unique tasks
* Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience
* Solid knowledge and proficiency in the use of fabrication tools
* Ability to fabricate complex hardware
* Solid knowledge of generally accepted technical theory


If you are interested in this Advanced Engineering Technician - 3rd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315298
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-2nd shift

Description:
An Advanced Engineering Technician-2nd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-2nd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-2nd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314490
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-3rd shift

Description:
An Advanced Engineering Technician-3rd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-3rd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-3rd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314491
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Designer

Description:
An Aerospace Designer job in Cincinnati, OH and Indianapolis, IN is currently available at Belcan. This is a full time, direct job with full benefits. Great matching candidates will have aerospace interiors design experience with seating and a degree in mechanical design or engineering . You will be working at Belcan as part of a team supporting our customer

Aerospace Design Engineer job duties:
* Engineering definition of aerospace seats and other interiors for multiple customers.
* You will work with all levels of engineering stake holders to drive the desired outcome.
* Responsible for your work as part of a team to meet customer deliverables and dates.
Qualifications:
* BS in Mechanical or Design Engineering or equivalent experience
* Experience with NX and TeamCenter
* Modeling & Drafting
* Excellent communication and organization skills
* Legal authorization to work in the US required
Desired but not required skills:
* Electrical Harness Routing
* Sheet Metal Design
* Project management experience

If you are interested in this Aerospace Designer job in Cincinnati, OH please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!


 
Job Number: 315642
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 01/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Structural

Description:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

Must have a thorough knowledge of aircraft repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Duties may include, but are not limited to:

• Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas.

• Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure.

• Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes.

• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair.

• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts.

• Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.

• A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.

• The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests.

• Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

• Maintain necessary certifications, licenses and permits as required for assigned work.

• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
 
Job Number: JPC-1334
Job Location: SAN ANTONIO, TX
Rate: 35-40 HR
Per Diem: YES
Overtime: NO
Duration: 12 MONTHS
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Mechanic

Description:
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes
Low observables experience
Current/active clearance
Training certification, experience maybe required to be shown (ex: A&P, military records, etc)

Skill Sets Needed below:
F-22 - 6+years
F-35 - 6+years
General Assembly - 6+years
Airframe Repairs - 6+years
FAA A&P (Airframe & Powerplant) License -4 to 6 years
Military Traning Records - 4 to 6 years
 
Job Number: CJH-6258-1
Job Location: Langley AFB, VA
Rate: 32.64
Per Diem: Yes
Overtime: Possible
Duration: 12 Months
Start Date: Asap
Input Date: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframes Mechanic

Description:
Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulation
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes
Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders.
Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.
Utilizes tools to include but not limited to drills, sanders, angle motors, shears, drill press, special tools, and pneumatic riveter.
Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals.
 
Job Number: CJH A-6258
Job Location: Langley AFB, VA
Rate: $32.64
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (Second Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Flight Test experience.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years' experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 16875
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 12/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer (16 needed)

Description:
Unique Skills:
• Avionics and/or Electrical system development and integration experience is required.
• Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
• Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
• Understanding of DO-160, DO-178 and DO-254 processes is preferred.
• System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
• ARP-4754A experience including requirements development, validation and verification is preferred.
• Experience with IBM DOORS or other requirements management database is preferred.
 
Job Number: 24-536
Job Location: Savannah, GA
Rate: $68-75/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Qualification Test Engineer

Description:
ABOUT THE JOB:
This position is responsible for performing qualification testing of various avionics systems.

REQUIRED SKILLS:
• 3+ years aerospace qualification testing experience
• High level of knowledge in one or more of the following DO-160 test environments and procedures:
o Physical (temperature, vibration, humidity, altitude, waterproofness, etc.)
o Power Input (power input, ISS, VS, AFCS, etc.)
o EMI (emissions, RF susceptibility, lightning, ESD, etc.)
• Knowledge of qualification test setups including:
o Able to know if a lab is setting the test environment correctly
o Able to know if the lab is collecting the data needed for the report
• Experience reviewing qualification test data
• Experience developing qualification test reports
• Experience troubleshooting test failures and distinguishing the cause of the failure such as:
o Is it test equipment?
o Is it test setup?
o Is it unit under test?
o Is it procedural?
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented
• Ability to work in a collaborative team environment

PREFERRED SKILLS:
• Knowledge of attitude/altitude Technical Standard Orders (TSOs)
• Knowledge of cockpit voice recorder TSOs and Advisory Circular ED-112A
• Knowledge of Minimum Performance Standard AS8034B for Multipurpose Electronic Displays

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 3+ months
Start Date: ASAP
Input Date: 07/30/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Test Engineer

Description:
The Avionics System Test Engineer will perform Avionics and Mission systems integration testing to verify and trace to the technical requirements as well as generate normal range and robustness test cases and procedures in host scripts.

Responsibilities

• Execute the testing on the target software installed in the target hardware on the test bench.

• Test the interfaces between systems in the Invictus 360 System Integration lab and test benches

• Analyze the results and disposition any test failures, update the test trace matrix (as reqd), fill out the checklists (as reqd).

• Configuration manage the tests and results and other test related artifacts in the DIMENSIONs configuration management tool.

Requirements:

BS, Electronics / computer science required. Must have Aerospace/Defense experience
Minimum of 3+ yrs.
Must have experience with Avionics test case/procedures and test scripts generation using C#, Microsoft software suite applications (Word/Excel, etc.), Lab test bench environment
Experience with aeronautical bus architecture including ARINC 429, RS 422, Ethernet, 1553 and discrete types
US person required
 
Job Number: JR-026243
Job Location: Fort Worth, TX
Duration: Permanent Full-Time
Input Date: 09/08/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineers with DOORS, V&V, DO-160

Description:
Contract-Avionics/Power Engineer-REQ#167670 in Savannah, GA
Skills:
Avionics and/or Electrical system development and integration experience is required.
Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
Understanding of DO-160, DO-178 and DO-254 processes is preferred.
System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
ARP-4754A experience including requirements development, validation and verification is preferred.
Experience with IBM DOORS or other requirements management database is preferred.
====================
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: Savannah, GA
Rate: $65-75/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 05/11/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
An Avionics Technician job in Palo Alto, CA is currently accepting applications. This is a 2-month contract position with our key aviation client. In this role, you will be responsible for fabricate and install wire harnesses, and electronic systems, modules, and sub-assemblies on our industry leading eVTOL aircraft. You will be working in a fast-paced prototype development environment and will be expected to work as part of a team. To be considered for this role, you will have a High School Diploma or equivalent along with 5+ years of aviation experience performing modifications or aircraft wiring installs and 3+ years of experience as a harness technician working on application critical, high-complexity harnesses.

Avionics Technician Job Responsibilities:
* Install and fabricate wire harnesses through lay in, routing, dressing and connector termination using aerospace approved tooling and best practices.
* Locate and install harness mounting hardware inclusive of click studs and clamps.
* Able to work from both very detailed, released manufacturing drawings as well as development harnesses sketches.
* Meet scheduled timelines and, in some cases, aggressive deadlines to have hardware ready for project milestones
* Follow engineering designs and building concepts/prototypes assisting with testing, continuity checks and data collection.

Avionics Technician Job Requirements:
* High School Diploma or equivalent. A&P Certification preferred
* 5+ years of aviation experience performing modifications or aircraft wiring installs
* 3+ years of experience as a harness technician working on application critical, high-complexity harnesses
* Underpinning knowledge of IPC 610/620
* Demonstrated familiarity with AC43.13-B
* Prior experience of bundling harness using techniques and methods including wax string lacing
* Must have hands on experience using shop tools and calibrated aerospace tooling including torque wrenches, crimping and striping tools.
* Must be able to lift 25 lbs unassisted
* Must be able to distinguish colors
* Prior work experience in the aerospace industry. Composite airframe preferred.
* Successful experience in a fast paced prototype/design environment

If you are interested in this Avionics Technician job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314285
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/15/2021
Last Updated: 09/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician IV

Description:
An Avionics Technician IV job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. You'll be responsible for moderately complex installation, testing, troubleshooting, and repairing our aircraft avionics and electrical system components and keeping our aircraft in airworthy condition. To be considered for this role, you will have a High School Diploma or GED and typically 10 or more years of relevant experience.

Avionics Technician IV Job duties:

* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair,
wiring installation, soldering' and crimping techniques

Qualifications:

* High school diploma or GED equivalent and typically 10 or more years of relevant
experience; A higher-level degree may substitute for experience; Related experience may be
considered in lieu of required education
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US
Military

Pay Range: Up to $39/hr DOE

If you are interested in this Avionics Technician IV position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314642
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314638
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314641
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Inconen is looking for an Avionics Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with IBM DOORS or other requirements management database is preferred.

Education:
-Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Other Requirements
-Advanced degree in engineering related field preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 15265
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/11/2022
Last Updated: 01/31/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Process Supervisor

Description:
A Business Process Supervisor (Engineering Team Lead) job in Phoenix, AZ is currently available at Belcan. This job is a 6 month contract assignment. o be considered for this role, you will need a Bachelor's degree in Engineering and at least seven years of technical experience with engineering or project management.

Business Process Supervisor Job Duties:
* Manage Improvement teams and implementation processes.
* Oversee team activities associated with business process mapping and evaluation of existing business processes for the Honeywell Intelligrated Team.
* Oversee team activities associated with Identification of areas of improvement and the creation of future state process maps.
* Oversee team activities associated with creation of documentation detailing goals and implementation of process improvements identified through study of overall business process flows and production metric data.
* Oversee team activities associated with conducting ongoing analyses of metric data for new opportunities to promote efficiency and effectiveness throughout the operation.
* Oversee team activities associated with updating department procedures and policies to align with current state and/or future states.
* Generate team reports using an agreed-upon template by Honeywell, and provide status updates on process improvements regularly.
* Map and evaluate existing business processes for the Honeywell Intelligrated Team.
* Identify areas of improvement and create future state process maps.
* Create documentation outlining process improvements identified through study of overall business process flows and production metric data.
* Conduct ongoing analyses of metric data for new opportunities to promote efficiency and effectiveness.
* Update department procedures and policies to align with current state and/or future states.
* Oversee team performing business-wide process monitoring and evaluation identifying areas of improvement in cost, quality and delivery metrics. Develop means to capture business metric data, maintain and report data to identify and drive improvement strategies.
* Drive team activities associated with process improvement strategies and activities. Drive improvement plans to completion, engaging necessary team resources for maximum measurable benefit and report on overall improvement results as obtained.
* Weekly reports on status and issues

Requirements:
* Bachelor's Degree in Mechanical, Manufacturing, or Electrical Engineering
* Computer skills including Excel, Power Point, Project
* Lean manufacturing experience, certification in Green Belt a must, Black Belt a plus
* A minimum of seven years technical experience with engineering or technical project management

Desired:
* PMP Certification
* Strong in management operating systems that facilitates communication
* Ensure that departmental core competencies include continuous ME skill development
* Understand business objectives and more importantly the ability to interact with our customers
* Work with functional leaders to prioritize resources and implement project objectives
* Persuasion skills to influence others to accept new concepts, practices, and approaches
* Business acumen knowledge of current and emerging practices, methods, and information relating to discipline and application within the industry


If you are interested in this Business Process Supervisor job in Phoenix, AZ, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315166
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/11/2021
Last Updated: 09/22/2021
Firm Name: BELCAN TECHSERVICES
Attention: BeeLor
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C++ Catia Developer

Description:
C++ Catia Developer

Location: Fort Worth, TX

6-12 month contract

Job ID: #61901



Citizenship Requirement: U.S. Citizenship required

Min years of experience: 5



Degree Requirements: B.Sc. Computer Science or Electrical Engineering



Responsible for migration of a wire harness routing and bundling C++ program from Catia V4 to Catia V5 API’s

Required Skills

•   Software Engineer with experience developing large complex systems

•   CATIA V5 CAA Programming experience

•   CATIA Electrical API experience

•   Minimum 5 years C++ programming experience

•   Ability to understand and solve complex problems

•   Able to read and understand existing complex code

•   Works well within Agile team framework

•   Must be able to work independently

•   Excellent verbal/written communication skills

Desired Skills

•  Electrical Harness design domain knowledge

•  Systems engineering background

•  C++ Std template library

•  CATIA V4 programming experience

•  Knowledgeable in the application of routing algorithms (graph data structure)

________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61901
Job Location: Fort Worth, TX
Duration: 6 -12 month
Start Date: ASAP
Input Date: 09/03/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Defense/Aerospace CNC Programmer

Description:
A CNC Programmer job is currently available at Belcan in Wichita, KS. This is a full time, direct position with Belcan and comes with full benefits. Great matching candidates will have several years of CNC Programming and hands on experience in a shop floor & assembly environment. You will be a vital team member on large and medium size programs and projects, presenting information as needed, and ensuring critical customer needs are met.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

CNC Programmer Job Duties:
* Provide numerical control, machining, and programming technical expertise to support 4 / 5 axis machining and turning NC programs
* Develop programs from model-based definition using assigned CAM software: CATIA
* Utilize Vericut validation software for NC program
* Analyze blueprints, engineering models, and electronic controls to support NC programming
* Work with CNC machine operators to optimize or modify programs as required
* Plan, create, verify, and revise machine control data and documentation that directs the operations for numerically controlled machines
* Develop a tooling list for each program
· Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and
programming, cutting tools, components and parts, unique parts, scrap, etc.

CNC Programmer Qualifications:
· Five+ years of relevant work experience as a CNC Programmer/ Manufacturing Engineer.
· Proficient CATIA knowledge; we will consider experience with other CAM software (NX)
· Experience and working knowledge of manufacturing process, assembly, and fabrication process.
· Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
· Experience creating and updating technical documents, reports, and standards.
· Excellent oral and written communication skills.
· Extensive understanding of product engineering concepts and applications.
· Ability to be a self-starter with potential for technical leadership and guidance.
· Strong analytical reasoning and problem-solving skills.
· Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.

Desired but not required skills:
· Mechanical aptitude and an understanding of design for manufacturing concepts.
· Hands on experience in the shop/manufacturing environment
· Understanding of Mechanics of Materials and Structural Design.
· Knowledge of CAD Modeling (2D, 3D).
· Proficiency in MS Office products
· Experience with Cost reduction.
· Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this CNC Programmer job Wichita, KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 312574
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 02/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
A CNC Programmer job in Los Alamitos, CA is currently available through Belcan. In this role, you will be responsible for the managing, programming and maintenance of computer numeric controlled (CNC) equipment for prototype (first run) and production of composite parts within the facility. To be considered for this role, you will have a High School Diploma, or equivalent, plus 5-7 years of relevant experience.

CNC Programmer Job duties:

* Review electronic or written blueprints or specifications for a job
* Review and obtain proper tooling
* Program extremely close tolerance parts
* CNC program in Mastercam (2020) 3, 4, and 5 axis geometry, proving out programs prior to machining, machining of parts and tools through CNC machining on 3-axis vertical mills, Large Capacity 5-axis CNC Router, 2 axis lathe and manual machining
* Work with operators, program managers, engineers to determine project scope, schedule and important job details
* Determine methods, tooling, feeds, speeds and all other necessary requirements necessary for manufacturing of parts
* Machine composite materials including carbon, fiberglass, honeycomb, and others
* Direct or train other employees in machine setup, running, maintenance and cleaning
* On occasion, you may be asked to work irregular hours to accommodate manufacturing schedules
* Keep program managers informed of operations, problems, and opportunities as they arise
* Maintain appropriate records and documentation

Qualifications:

* Prior experience with MasterCAM programming
* Programming 3, 4 and 5 axis Mill & 2 axis Turn equipment
* Must have strong GD&T knowledge to interpret engineering drawings from sketches, determine cutting or grinding tools to be used, method of holding, and machine speeds and feeds
* Varied CNC operating experience desirable
* Must have worked in CNC programming demonstrating a high degree of proficiency
* Experience machining a variety of materials.
* Solid understanding of manufacturing processes for layup, trim, and assembly of composite hardware
* Previous experience working in a fast-paced production environment with high quality requirements; example military, aerospace or medical equipment highly preferred
* Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
* Ability to read/interpret engineering drawings and specifications
* Able to perform basic mathematics (addition, subtraction, multiplication, division)
* Ability to identify composite damages


If you are interested in this CNC Programmer position in Los Alamitos, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314467
Job Location: Los Alamitos, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 01/04/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Unique Skills:
• Capitol Harness &/or Mentor Graphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred.
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic.
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience.
• Electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
• Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-596
Job Location: Savannah, GA
Rate: $60-$65/Hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 08/25/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Engineer – DER

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Qualifications:
• Strong computer, written and verbal communication skills required.
• Experience with Microsoft Office Word, Excel, PowerPoint are required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with avionics and electrical system design to the requirements of 14 CFR Part 23 preferred.
• Experience with computer-aided wiring diagram and harnessing software is desired.
• Mentor Graphics preferred. Experience with electrical wiring, harnessing, and manufacturing is strongly desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields desired.

Unique Skills:
• FAA designee (ODA UM or DER) -14 CFR Part 23 Chart C1,2,5 (L17 EWIS Not requiered but prefered) – Systems & Equipment Electrical Experience with complex certification projects integrating multiple systems engineering experience or relative aviation technical or systems experience.
• Responsible for ensuring the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, and finding compliance.
• Assists in preparation of reports, engineering drawings, and other documents.
• Responsible for completing complex development, design testing and certification assignments for new design or modifications.
• Develops creative scientific alternatives during course of job assignments to reach desired outcome.
• Performs work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-598
Job Location: Savannah, GA
Rate: $135/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson & Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Interiors, Engineer 4

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Unique Skills:
• Capitol Harness &/or Mentor Graphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred.
• Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
• Catia V5 basic navigation experience.
• Aircraft electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-506
Job Location: Savannah, GA
Rate: $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/15/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services. Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Unique Skills:
• Proficient in System level Wire Diagram/Schematic design for aircraft.
• Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
• Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
• Ability to complete system level ELA (Electrical Load Analysis).
• Ability to develop or decipher technical and test specifications.
• Knowledge of 14 CFR 25 Subpart H - EWIS based design.
• Knowledge of Catia V5.
• Part 25 Certification experience for cabin interiors preferred.
• Familiarity with aircraft STC procedures preferred.
• Makes technical decisions and provides recommendations demonstrating leadership authority.
• Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-559
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/15/2021
Last Updated: 11/16/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Electrical Systems Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Proficient in System level Wire Diagram/Schematic design for aircraft.
Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
Ability to complete system level ELA (Electrical Load Analysis).
Ability to develop or decipher technical and test specifications.
Knowledge of 14 CFR 25 Subpart H - EWIS based design.
Knowledge of Catia V5.
Part 25 Certification experience for cabin interiors preferred.
Familiarity with aircraft STC procedures preferred.
Makes technical decisions and provides recommendations demonstrating leadership authority.
Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15573
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 03/01/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
Proficient in Catia V5
Proficient in Smarteam
Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
Experience of routing plumbing on various monuments
Electrical Harness Installation (EHI) experience also a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15574
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 02/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical/EHI Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Primary responsibilities involve engineering designs of new and derivative versions of electrical systems, components, wire harnesses and wire installations relative to interior furnishings and amenities as part of outfitting new aircraft. Examples include but not limited to: system & harness development for custom cabinetry (such as galleys, lavatories, closets, & storage compartments), interior peripheries, water/waste systems integration, oxygen systems integration, overall electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

UNIQUE SKILLS:
AutoCad, Capitol Harness &/or Mentorgraphics required
Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
Experience with power distribution, lighting, switching, wire sizing and routing.
Experience with systems development, layout, logic and wiring diagram creation.
Familiarity in mechanical system design.
Analyze Electrical designs in 3D models
Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
Preferred candidate will have:
Catia V5 basic navigation experience.
Electrical system design experience.
14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
EWIS Certification familiarity & experience preferred.
Familiarity with aircraft STC procedures preferred.
Experience with electrical systems test plans and reports

EDUCATION AND EXPERIENCE REQUIREMENTS:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

ESSENTIAL FUNCTIONS:
Contributes to planning, developing and coordinating of important engineering projects
Provides specialized technical assistance to team members
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
Determines and develops own approach to solutions within schedule and cost objectives
Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-591
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3 (Secret Clearance)

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 (Secret Clearance) for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

Duties:
Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.
30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
30% - Perform validation of manufacturing bills-of-material and their attribute data.
15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
10% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required
-Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 16846
Job Location: Orlando, FL
Rate: $45.00 - $53.85/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 09/07/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV

Description:
Inconen is looking for a Creo Product Definition & Verification (Checking) Designer III/IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret clearance is preferred but not required **
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.

Typical responsibilities include:
-Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 16885
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 09/12/2021
Last Updated: 10/18/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Electronic Repair Technician

Description:
A Customer Service Electronic Repair Technician job is available with a manufacturing client in Salt Lake City, Utah. In this position you will work on a specialized team that aims to provide world class repair services for our customers. You will perform activities associated with the configuration, testing, troubleshooting, and repair of electronic/electro-mechanical parts sent in from customers for repair, as well as new parts going into new equipment manufactured at our SLC manufacturing facility. You will also perform routine maintenance, calibration, and repair of test fixtures to ensure ISO standards are maintained. In this position you will work in a climate-controlled environment and no travel is required.

Job Responsibilities;

* Read engineering drawings and schematics to ensure product is constructed to specifications.
* Component level troubleshooting of electronic PC boards using engineering schematics and typical tools (DVM, O-Scope, Power Supply, Waveform Generators, etc.)
* Component level rework/repair of PC boards containing thru-hole and surface mount components.
* Determine if PC boards and electronic sub-assemblies are tested completely.
* Make technical evaluations with warranty returns and suggest pertinent changes to existing fixtures or programs to ensure quality testing of PC boards and electronic sub-assemblies.
* Repairs and/or modifies electronic sub-assemblies as per engineering change orders.
* Participates in ISO continuous improvement and safety programs to ensure adaptation to customer's needs.
* Participates in Job Safety Analysis/Behavior Based Observations to identify and reduce potential health and safety risks.

Job Requirements:

* Associates degree in electronic engineering technologies or equivalent, with a minimum of 2 years practical experience to include troubleshooting digital and analog electronics.
* Understanding of AC/DC electrical theory and how to apply it.
* Must have ability to operate typical electronic lab instruments (DVM, O-Scope, Power Supply, Waveform Generators, etc.).
* Applied knowledge of ESD prevention programs.
* Must be proficient using Microsoft Windows® operating system and basic understanding of computers.
* Ability to program in high level languages: C, C++, Pascal, etc., and to understand and use computer functions with respect to product testing, is a plus.

THIS IS A 1ST SHIFT CONTRACT TO HIRE POSITION

If you are interested in this Customer Service Electronic Repair Technician job in Salt Lake City, Utah, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 315842
Job Location: Salt Lake City, UT
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 09/03/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: EdwardPaquet
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Support Engineer

Description:
A Customer Support Engineer job in West Palm Beach, FL is currently available at Belcan. This is a direct, full-time position with benefits. To be considered for this role, you will need a bachelors degree in a related field or equivalent work experience.


Customer Support Engineer job duties:
* Develop source data for the F135 gas turbine engine using proprietary software applications to meet engineering requirements utilizing engineering documentation and processes
* Develop maintenance procedures based upon engineering standard work requirements
* Understand and utilize engineering source data and processes
* Identify root cause(s) of issues and provide technical solutions


Qualifications:
* Minimum Bachelor of Science Degree in Mechanical, Electrical, Aerospace, Systems engineering or comparable experience
* Aptitude for computers, advanced software, and modeling/simulation applications
* Experience using Microsoft Office Suite, (i.e. Word, Excel, PowerPoint, Outlook)
* Exceptional work ethic; capacity to work well individually and as part of a team
* Motivated to learn and to be productive, and meet customer expectations with excellence
* Due to the nature of our work US Citizenship is required


Desired skills include:
* Gas turbine engine experience/familiarization in either commercial or military application
* Familiar with maintenance facilities and processes
* Knowledge of basic mechanical skills and tools.


If you are interested in this Customer Support Engineer opportunity in West Palm Beach, FL, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 314675
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 01/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: RobertRussell
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Doors & Mechanisms / Crew & Equipment

Description:
Inconen is looking for a Design Engineer - Doors & Mechanisms / Crew & Equipment for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Combined Engineering team responsible for Doors & Mechanisms and Crew & Equipment across all company programs including New Product Development, the current Large Cabin fleet, and Special Missions.
-This position is targeted at New Product Development.
-An Engineer on this team will be responsible for a variety of tasks developing and certifying designs within these disciplines.
-Design experience at an aircraft OEM is required.
-Catia V5 experience is required.

Preference given to candidates with experience in these areas:
Doors & Mechanisms:
• Main entry, emergency exit, landing gear, service, and access doors
• Drive mechanisms, metallic and composite structure, seals
• Ingress / egress, placarding
• Hydraulic actuators and dampers
• Kinematics

Crew & Equipment:
• Electrical equipment installations
• Flight deck layout & equipment
• Cabin insulation
• Flammability
• Component qualification
• Closeout panels and composites
• Electrical bonding
• Secondary structure including racks, trays, shelves, and bracketry

Additional experience preferred:
• Supplier design and qualification
• Gulfstream processes and procedures
• New aircraft program certification
• Real world (hands on) aircraft familiarity
• Catia V5 with Smarteam
• RTCA DO-160
• ARP4754A

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16886
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/13/2021
Last Updated: 10/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer – Doors & Mechanisms

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Design experience at an aircraft OEM is required.
• Catia V5 experience is required.
• Preference given to candidates with experience in these areas:
o Doors & Mechanisms:
 Main entry, emergency exit, landing gear, service, and access doors
 Drive mechanisms, metallic and composite structure, seals
 Ingress / egress, placarding
 Hydraulic actuators and dampers
 Kinematics
o Crew & Equipment:
 Electrical equipment installations
 Flight deck layout & equipment
 Cabin insulation
 Flammability
 Component qualification
 Closeout panels and composites
 Electrical bonding
 Secondary structure including racks, trays, shelves, and bracketry
o Additional experience preferred:
 Supplier design and qualification
 Gulfstream processes and procedures
 New aircraft program certification
 Real world (hands on) aircraft familiarity
 Catia V5 with Smarteam
 RTCA DO-160
 ARP4754A

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-605
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 09/13/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Manager

Description:
General Summary:

The ECS Manager manages the technical, cost and schedule and personnel aspects of the Environmental Control Systems (Pneumatic System, Pressurization System, Air Conditioning, Cabin Pressure Control System, Leak Detection System, Oxygen System, and Waste System) through all phases of design, development, certification, production, and product support. Ensures all aspects of design are compliant with the system requirements document.



Duties and Responsibilities:

Oversees and coordinates the ECS project activities through all phases of design, development, certification, production, and production support.
Maintains and presents to senior management the integrated project schedule and status for the Environmental Control Systems.
Tracks and reports status of action items related to design, development, certification, and flight test related for the ECS.
Prepares and maintains functional test procedures to test the ECS sub-systems as installed on the aircraft.
Prepares and maintains functional interface control document(s) that identify the integration requirements between the ECS sub-systems and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics/electrical power system integration of the ECS sub-systems.
Conducts regression tests to ensure that the ECS sub-systems are integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the ECS sub-systems to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the ECS.
Prepares/reviews qualification test procedures and qualification test reports associated with the ECS.
Establishes qualification test schedules with the supplier of the ECS components and coordinates Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables between the supplier, HAC and the DERs.
May serve as the DER for the applicable delegations.
Supports the creation of the certification plan for the ECS.
Manages personnel by assigning and monitoring tasks so that they are done on time and are complete and accurate.
Conducts performance evaluations for personnel and creates, implements and monitors personnel development plans.












Education, Work Experience, Certification and/or Licensure:

Bachelors degree in Engineering or related field required.
8 years of leadership experience in one or more of the Environment Control Systems including: design; development: aircraft integration, and certification.


Knowledge, Skills and Abilities:

Experience in managing personnel.
Strong organizational skills.
Excellent oral and written communication skills.
Strong presentational skills.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong working knowledge of DO-160, DO-178B and DO-254 processes are required,
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Strong working knowledge of FAA processes and procedures related to qualification testing.
Strong working knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.

The Structures Company LLC is an AA/EOE.
 
Job Number: 500
Job Location: Greensboro, NC
Rate: $150K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-6 Weeks
Input Date: 09/07/2021
Last Updated: 12/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Mechanical/Electronic/Electrical Design

Description:
Description

Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

2-3 years of experience in electrical or mechanical engineering
Assembly experience preferred
Experience with supplier relations
Bachelor’s degree preferred, but not required

6 months with the possibility for extension or to become permanent employee. Candidate will need to be local or willing to relocate as this is an on-site role. 
 
Job Number: 46836-1
Job Location: Berkeley, MO
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 01/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Aircraft Interiors Engineer with Mentorgraphics

Description:
===========================================
Engineer Contractor 3 - Electrical Interiors in Savannah, GA
Unique Skills:
• Capitol Harness &/or Mentorgraphics experience
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
• Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred. • Experience with systems development, layout, and logic
• Familiarity in mechanical system design preferred.
• Analyze Electrical designs in 3D models preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
• Catia V5 basic navigation experience. • GV, GVI, & GVII electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: PL Elec Interiors
Job Location: Savannah, GA
Rate: $60-65/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Inconen is looking for an Electrical Applications Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Skills:
-Candidate must have in-depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
-In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
-Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
-Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15311
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 02/09/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer (4 needed)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Unique Skills:
• Candidate must have in depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
• In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
• Extensive knowledge of EWIS component selection criteria
• Experience with Mentor Graphics Capital Harness System (CHS) preferred

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-524
Job Location: Savannah, GA
Rate: $66-70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/15/2021
Last Updated: 11/16/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design & Analysis Engineer

Description:
MUST BE US PERSONS - REMOTE WORK IS AN OPTION
DESIRED EXPERIENCE:
• VHDL,
• Xilinx FPGA’s
• System Verilog
• UVM
• FPGA On Target Testing (OTT)
• DO-254
• MIL-STD-882E
• MIL-HDBK-516C
• Bachelor’s Degree with 5+ years of experience

INTERVIEW PROCESS:

The manager is looking to schedule interviews as soon as possible. These will be phone interviews with the Chief Firmware Engineer and the Engineer Manager where they will primarily discuss the candidates experience with VHDL, developing DO-254 processes and experience with On Target Testing.

JOB DESCRIPTION
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.

This will be a 12 month assignment on a team of 30 where they will be developing requirements, code, and test procedures for safety critical avionics. This opening is open to virtual candidates, as the person selected for this role will not be required to sit on-site.

TSC LLC is an AA/EOE
 
Job Location: Hazelwood OR Remote, MO
Rate: $60-73/hr
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 06/21/2021
Last Updated: 12/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Analysis Engineer // Multiple Locations also

Description:
Design and Analysis Engineer 4

Location: Everett, WA/ Renton, WA/ Seattle, WA
Duration: 12 Months

Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skills:
Good lab testing,
Knowledge of client processes and tools
EEE,
Computer engineering,
Design concepts and techniques,
Electronics system design,
EMI/EMC,
Safety Awareness,
systems thinking

Previous client experience is a plus but not required.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Location: Everett, WA
Rate: $65/hr
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Inconen is looking for an Electrical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience with Capital Logic required.
-Experience with Smarteam preferred.
-Experience with Instrumentation electrical design a plus.
-Experience with Aircraft electrical wiring diagrams a plus.
-Analog electrical design experience a plus.

Education and Experience Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15447
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Job Title: Electrical Engineer (Contract- Hire)

TriMech is hiring for a senior electrical engineer to provide electrical product design, electronic packaging, and enclosure design of chemical and biological sensor packages.

Responsibilities:

Be responsible for PCB Layout and schematic creation using Altium or Similar product
Create manufacturing output gerber files, CAM files, BOM etc.
Interface with PCB manufacturers and contract board assemblers
Own printed circuit board design from start to finish
Hands on prototyping to support new product development
Required Skills:

5-10 years of experience in electrical design of printed circuit boards to utilized for mobile electronics and senor packages
Development of embedded firmware (microcontroller, C language and/or FPGA design
Testing and debugging of new products and prototypes or circuit card assemblies
System integration and debugging (analysis of one or more system components and helping to solve an issue) and the creation of technical documentation for designs and testing.
Proficiency in MS Office products like Excel, Visio, and Word.
Excellent verbal, written and graphical communication skills
Education Requirements:

BSEE Degree or Similar


TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.
 
Job Number: 10444
Job Location: Belcamp, MD
Rate: Hourly
Per Diem: Possible
Overtime: Possible
Duration: 6-8 mo
Start Date: ASAP
Input Date: 09/06/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Mike Ayres
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
High voltage architecture and vehicle system design and wire harness schematic and design experience are critical skills for this role.
OVERVIEW: Senior-level electronics engineering position. Uses fundamental engineering principles along with in-depth working experience and knowledge to support design and development of prototype and concept systems. Performs assignments and leads projects with minimal instruction and guidance from senior level engineers & managers. Develops new processes and tools. Acts as a resource and provides guidance to colleagues with less experience.
EDUCATION/CERTIFICATION/YEARS OF EXPERIENCE:

 Minimum of a Bachelors of Science in Engineering (Electrical preferred)
 Master of Science in Engineering desired
 6+ years of engineering experience
 
Job Number: 1
Job Location: New Hudson, MI
Per Diem: Possible
Overtime: Possible
Duration: 12
Start Date: ASAP
Input Date: 09/01/2021
Firm Name: MWIDM INC
Attention: Lalith Gurung
Address: 1445 CITY AVE STE 10B
City, State: WYNNEWOOD, PA 19096
Phone: 215/666-0012
Website: www.mwidm.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - RF Circuits and Systems

Description:
ABOUT THE JOB:
This position is responsible for electrical design of RF and microwave circuits in TCAS and weather radar systems.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 7+ years RF and microwave circuits design experience
• Experience developing requirements for RF systems
• Ability to optimize and center RF circuits
• Experience with PWB layout of RF circuits
• Experience coordinating with FPGA, systems and software engineers to optimize a design
• Ability to support MOPS (minimum operational performance standards) testing and troubleshooting
• Experience supporting qualification testing and troubleshooting
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Familiarity with one or more of the following: TCAS, transponder, DME, ground proximity warning system, and weather radar products

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 11/19/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Test Facility

Description:
ABOUT THE JOB:
Primary job focus is design and risk mitigation of gas turbine propulsion test systems of all types and sizes, from complete test facilities to individual test benches.

REQUIRED SKILLS:
• Bachelor of Science degree in Electrical or Mechanical Engineering.
• Minimum 5 years of Electrical Engineering experience.
• Experience in industrial automation including control design and implementation.
• Minimum 2 years of Electrical drawing experience, AutoCad or AutoCad Electrical with an ability to review drawings, catch errors and provide corrective feedback on designs.
• Minimum 2 years of PLC ladder logic programming experience with experience with PLC hardware and HMI user interface screens.
• An understanding of mechanical systems, such as valves, load banks, and dynamometers.
• Ability to write Facility Control Software, solving software communication issues, designing HUE driven user screens and reducing maintenance costs through effective software architecture.
• Experience with 3-phase power and its distribution in a test facility.
• Ability to manage time, supplies, personnel, and budget to meet challenging deadlines.
• Skilled at creating accurate cost estimates and schedules for test system designs.
• Willing to work with vendors to size and select hardware.
• A skilled leader, a great listener, and someone who exercises creative thinking when designing new systems or applying innovative methods to repair existing ones.

PREFERRED SKILLS:
• Experience in the Aerospace Industry mechanical testing environment with oversight responsibilities.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-18 months
Start Date: ASAP
Input Date: 07/30/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Eng/Secondary Structure (4 needed)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Unique Skills:
• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical workbench is necessary
• Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects .
• Provides specialized technical assistance to team members.
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
• Determines and develops own approach to solutions within schedule and cost objectives .
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
• Acts as liaison with representatives outside of the assigned group/area .

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements .
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
• Perform other duties as assigned.
 
Job Number: 24-523
Job Location: Savannah, GA
Rate: $66-70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 12/06/2021
Last Updated: 02/08/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer /Secondary Structures

Description:
Contract - Electrical Harness Installation Engineer/Secondary Structures - Req# 164387 in GAC Savannah
Required Unique skills: Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical workbench is necessary
• Knowledge of Catia V5 Sheetmetal workbench is necessary

Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects .
2. Provides specialized technical assistance to team members .
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
4. Determines and develops own approach to solutions within schedule and cost objectives .
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
6. Acts as liaison with representatives outside of the assigned group/area.
Need answers to these questions for submittal to Gulfstream:
1 Why are you looking for work?_______________________
2 Are you a US Citizen ? __________________
3 Include updated resume with months and years on dates ________________________
4 Do you have any prior military experience? (Can you produce a DD-214?) ___________________
5 What is your highest level of completed education? ____________________________
6 W-2 Hourly Pay Rate request? ___________________________
7 Are you a prior Gulfstream contractor? ________________________
8 Are you able to work on site at client’s location in Savannah, GA on your own? _____________________
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Elec Harness
Job Location: Savannah, GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/15/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Secondary Structures

Description:
Inconen is looking for a Electrical Harness Installation Engineer - Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

Unique skills:
1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
5. Aerospace Experience is required
6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
8. Knowledge of Catia V5 Electrical workbench is necessary
9. Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15220
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/11/2022
Last Updated: 02/09/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Liaison Engineer

Description:
Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Aircraft products and services.  Coordinates with responsible engineering groups for aircraft build and Project Engineering focal points.  Support of drawing/model build lists and how they apply to each aircraft in flow.  Supporting multiple aircraft per year.  Understanding of drawings and model architecture so any changes as required can be entered into a database system so design engineering and program can address as required. Have a clear understanding of the items submitted for correction and process of getting them back to support operations.

Unique Skills:
Fundamental understanding of aircraft avionics systems engineering principles and experience developing and applying minor and major modifications and installations to aircraft systems.
The ability to use computer aided design tools such as Smart Team, CATIA V4 & V5, AutoCAD, or similar in the design and modification of aircraft systems.
Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers.
CHS/EWIS experience is a plus

Duties and Responsibilities include:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Ability to effectively work with and support a multi-disciplined team of engineers, mechanics, technicians, managers, customers etc. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
Is consulted extensively by associates and others as a recognized authority within the field.
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
Approach to problem solving balances technical product, cost and schedule.
Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-599
Job Location: Dallas, TX
Rate: $63-$68.25/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
JOB DESCRIPTION
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product life cycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
 
Job Number: 46427-1
Job Location: El Segundo, CA
Rate: $71/hourly
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: Now
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes -
Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders.
Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.
 
Job Number: CJH -A- 6259
Job Location: Langley AFB, VA
Rate: $32.64
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders. Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales.

Low observables experience
Current/active clearance
Training certification, experience maybe required to be shown (ex: A&P, military records, etc)

Skill Sets Needed below
Electronics - 6+ years
FAA A&P (Airframe & Powerplant) License - 2 to 4 years
Military Training Records -2 to 4 years
 
Job Number: CJH-6259
Job Location: Langley AFB, VA
Rate: 32.64
Per Diem: Yes
Overtime: Possible
Start Date: Asap
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical-Mechanical Designer

Description:
A Designer job in Phoenix, AZ is currently available at Belcan. To be considered for this role, you will have an Associates degree in Computer Aided Design or related degree, and five to ten years of experience designing components using Creo, with previous Aerospace experience strongly preferred. In this role, you will perform design tasks to include electrical & mechanical design, drafting, and redline incorporations.

Designer Job duties:
*Create and revises complex Electrical & Mechanical design concepts, layouts, drawings by investigating and analyzing customer specific problems. Designs will include cable designs, electrical schematics, electrical interconnect drawings, electrical cable routings, electrical housing designs among other electrical/mechanical design needs.
* Assures that mechanical cable parts and assemblies will fit or interface properly within limits or allowable tolerances without interference.
* Maintains records, files, drawings, part lists, specifications, standards or other data essential to the completion of drawings as required.
* Create specifications and models for OEM customer off the shelf components for use in electrical and mechanical designs.
* Verifies own completed work checking mechanical layouts, making mathematical calculations as required using handbooks and catalogs in support of drafting calculations, materials used and quantities.

Qualifications:
*Requires Associates in Computer Aided Design, or similar degree with 2+ years of experience.
*Must have demonstrated communication and interpersonal skills ensuring positive customer relations.
*Must have demonstrated ability on AutoCAD platform to develop design concepts. Previous experience with Creo Parametric & Windchill PLM is desired.
*Knowledge of electrical design concepts with experience of integration between electrical and mechanical Designs.
*Beneficial to have knowledge of mechanical design concepts with Geometric Dimensioning and Tolerancing (GD&T).
*Beneficial to have demonstrated abilities with Creo Schematics.
*Beneficial to have demonstrated abilities with Creo surfacing.
*Beneficial to have prior leadership experience.
*Beneficial to have demonstrated abilities with Revit.

If you are interested in this Designer job in Phoenix, AZ, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 315659
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 02/08/2023
Firm Name: BELCAN TECHSERVICES
Attention: JosephKlont
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Mechanical Assembly Specialist

Description:
Job Description:

Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.

---------------------------

Position Responsibilities:

%u2022 Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
%u2022 Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
%u2022 Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
%u2022 Coordinates with supervisor to establish work priorities.
%u2022 Works under minimal supervision.

Required:
%u2022 Must have 5+ yrs experience soldering components on PC board assemblies


Basic Qualifications (Required Skills/Experience):
%u2022 Minimum of High School Diploma or GED.
%u2022 More than 5 years of experience in electronics and electro-mechanical assemblies.
%u2022 More than 5 years of experience in a manufacturing or assembly environment.
%u2022 More than 5 years of experience performing soldering and electronics repair to the component level.
%u2022 More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.


Preferred Qualifications (Desired Skills/Experience):
%u2022 Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.


Typical Education/Experience:

%u2022 Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)

Relocation:

%u2022 Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: our client is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

--------------------------
Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification.
 
Job Number: JPC - 1757
Job Location: Germantown, MD
Rate: $34.00/hr
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 01/28/2022
Last Updated: 08/30/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
An Electronics Technician/Wire Harness Assembler job in Peoria, IL is currently available through Belcan. This job is a full-time position with benefits. To be considered for this position, you will need at least an Associate's Degree or equivalent work experience involving assembly of electrical and electronic systems, test stands, and prototype wire harnesses.
 
Electronics Technician - Wire Harness Assembler Job duties:
· Assemble electrical and electronic systems and prototype wire harnesses according to engineering data and knowledge of electrical principles.
· Use of hand tools and measuring instruments to build and repair electrical instruments or testing equipment.
· Collaborate with electrical engineers and other personnel to identify, define, and solve developmental problems.
· Record and maintain thorough and accurate records of all pertinent project information.
· Routine exposure to field conditions or actual manufacturing/development laboratory environments.
· Work with equipment that requires the utilization of good safety practices.
· This position also may require occasional travel to customer site.
 
Qualifications:
· Must be a US Citizen due to the nature of the work (ITAR Compliant position).
· Education: Associate Degree or equivalent experience in electronic technology, electrical systems, etc.
· Knowledge of electronic and electrical theories, education, and concepts.
· Capable of lifting up to 50 pounds.
· A valid driver's license is required.
 
Additional Desired Qualifications:
· Work experience with electronics, electrical systems and components, wire harnesses, etc.
· Work experience with hand tools, electronic equipment, electrical testing tools, etc.
· Ability to work in a team environment and take direction.
· Ability to work independently and be a self-starter.
· Ability to work in a fast-paced environment.
 
If you are interested in this Electronics Technician job in Peoria, IL, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

 
Job Number: 315539
Job Location: Peoria, IL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/20/2021
Last Updated: 10/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.
Adjusts and calibrates systems as required.
Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

Basic Qualifications :
Proficient in component level troubleshooting of solid state, digital, and RF circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.

Desired skills :
RF component level troubleshooting
Spea Flying Probe experience
ICT experience
Familiarity with Radar Systems
 
Job Number: CJH-R-6218
Job Location: Oldsmar, FL
Rate: $25
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/23/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer Level 2

Description:
Bachelor's degree in Systems Engineering, Computer Engineering, Software Engineering, Computer Science or Electrical Engineering
C++ 11 or later Cameo Enterprise Architect or IBM Rhapsody Python Software architecture development and documentation Software development and detailed design experience Software requirements development and traceability Systems Modeling Language (SysML) Unified Modeling Language (UML)
 
Job Number: CJH-M-3232
Job Location: Remote
Rate: $85
Per Diem: no
Overtime: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer role located in Redmond, WA is currently available through Belcan. The Embedded Software Engineer will develop firmware for state of are scanned laser products. This position will be responsible for a range of development activities from initial concept development, to prototype testing, through production release. A successful candidate will work in close collaboration with Digital RTL, MEMS, Electrical engineers, and software application engineers to deliver new products.

Embedded Software Engineer job duties:

* Develop firmware and embedded software across the stack from IO configuration to boot loaders
to application code for MCU, FPGA, and ASIC target
* Bring up an integration of new designs
* Design and implementation of control loops in embedded Linus and embedded real time systems
* Digital Signal Process algorithm development and optimization
* Verification testing of system performance
* Perform code reviews and provide feedback

EDUCATION AND EXPERIENCE REQUIRED

* BS or higher in Computer Science, Computer Engineering, Electrical Engineering, or related
* 2+ years of embedded software development experience
* Excellent knowledge of C and C++
* Passion for hands-on problem solving
* Proficiency in Python and/or other modern scripting and automation languages
* Familiarity with MicroC/OS or Embedded Linus
* Understanding programming/debugging real time embedded devices with ARM microcontrollers
* Knowledge of engineering best practices for the full product development lifecycle, including
design reviews, coding standards, code reviews, source control management, build processes,
and testing
* Solid communication, ability to understand complex systems and work in a fast-paced
environment
* Bootloader or Secure Boot experience a plus
* Excellent verbal and written communications skills in English


If you are interested in this Embedded Software Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315575
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer role located in Mesa, AZ is currently available through Belcan. The Embedded Software Engineer will work as part of a small, collaborative product team to design, develop, integrate, and test software in embedded and enterprise secure processing solutions.

Software Engineer duties:
* Provide technical recommendations, take lead role in documentation including system level
requirement through final system performance testing.
* Modify Software to fix errors, adapt it to new hardware, improve its performance, or upgrade
interface.
* Develop and maintain software suite to verify system capabilities and requirements.
specifications.
* Participate in planning, design, scheduling, prioritizing, and tracking the project.
* Collaborating effectively with engineers from different disciplines to design an develop software
architectures and API's.
* Work cross functionally with engineering, procurement, quality assurance, program
management, etc.
* Consult with engineering staff to evaluate interface between hardware and software, develop
specification and performance requirements and resolve customer problems.
* Analyze software requirements, determine design approach & unit test requirements, and write
software design specifications.
* Architect, write, and modify, high quality software with efficient and reusable code for customer
applications. Participate in integration and acceptance testing. Verify software functionality both
in test environment as well as in the field.
* Design for and achieve required regulatory and safety certification
* Communicate ideas, objectives and plans to the software team, including presentations and
status reports to management.
* Preform test, & verification using source debuggers and simulation tools & techniques
* Deliver software solutions that meet specifications, schedule, and quality standards. Enforce
good software practices.
* Ensure that software problems are resolved in a timely manner.
* Maintain useful documentation for software engineers and the rest of the project team.

EDUCATION AND EXPERIENCE REQUIRED:

* BS in Electrical or Computer Engineering or equivalent work experience designing and
architecting software systems.
* Experience in aerospace, avionics, government projects
* Excellent Communication Skills (oral and written)
* 4 years experience developing with C/C++
* Experience with Device Drivers, RTOS (WindRiver, GreenHills), MIL-STD 1553, ARINC 429, DO-
178, FACE
* Knowledge of embedded Linux environments
* Ability to write technical documentation for requirement specifications, test plans, procedures
and reports.
* Must be a US Person

If you are interested in this Embedded Software Engineer role located in Mesa, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315580
Job Location: Mesa, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/31/2021
Last Updated: 12/03/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 3: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15036
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Software Quality

Description:
Required
US Citizenship

Test embedded software applications to ensure that, through comprehensive testing, high quality software is developed and delivered and to ensure compliance to software requirements. Perform testing using a test station that consists of a rack of equipment (scopes, power supplies, function generator, DIO cards, etc., and using LabVIEW / TestStand for generating automated test procedures.

Job Responsibilities:
• Analyze and understand software requirements to generate a clear test plan and detailed test procedures
• Develop automated test using LabVIEW & various lab equipment
• Hold test readiness review and perform Formal Qualification Test (FQT) of real-time embedded software
• Concisely and accurately report technical details & status and document each phase of software test
• Generate clear and professional documentation; test plans, test descriptions and test reports
• Present test plans, status, and results at program technical reviews
• Follow and promote CMMI compliant software processes
Additional responsibilities may include software development:
• Design real time embedded C/C++ code for Microchip, Atmel, or TI microprocessor/DSP.
• Generate and unit test code using IAR Integrated Development Environment, Code Composer or equivalent on a custom breadboard in a lab setting.
Position Requirements:
• Bachelor’s degree in Computer /Software Engineering or Electrical Engineering
• Minimum of 5 years of experience with BS, or 2 years of experience with MS
• Familiarity with software Formal Qualification Test process and documentation
• Minimum of 1 year of experience with National Instruments LabVIEW and TestStand
• Comfortable in a lab environment working with tools such as function generators and oscilloscopes
• Strong analytical skills and the ability to work independently and organize/prioritize job assignments and tasks
• Effective interpersonal, written and oral communication skills
• Proficient use of personal computers using the Microsoft Office suite of products
• Ability to work effectively in a fast paced, rapidly changing, short turn-around environment
• Must be a U.S. citizen and qualify for a U.S. Government security clearance
Preferred Skills:
• Minimum of 10 years of experience with BS, or 7 years of experience with MS
• Minimum of 3 years of experience performing requirement testing of embedded software
• Familiarity with AS9100 and CMMI Level 3 standard practices and lifecycle processes
• Experience developing embedded C/C++ software
 
Job Number: 2110138486
Job Location: Plymouth, MN
Rate: $45.50 - $78.00
Per Diem: Possible
Overtime: Possible
Duration: 9 Months
Start Date: ASAP
Input Date: 09/02/2021
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

Engineer Electromechanical 3

Description:
Benefits:
Holiday Pay
Vacation Pay
Weekly Pay
Direct Deposit
Delta Dental / Group Health Insurance
401(K)
Referral Bonus
 
Job Number: 168379
Job Location: Redondo Beach, CA
Input Date: 11/23/2020
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Conformity Mgt Planning, Lead (Engineer)

Description:
• Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection
• Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successfully plan conformity planning.
• Provide accurate and concise reports that reflect current status and trends.
• Recommend actions to correct possible deviations and / or concerning trends
• Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.

Duties and Responsibilities:
Coordinate the work and support the team that will:
• Reconcile what is planned to be conformed to data in company system
• Entry of “Required Conformity” in Company electronic form
• Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
• Support the creation of RFCs in Teamcenter
• Reconcile / ensure existence of QRs for released drawings requiring conformity
• Create and keep updated a “database” to hold or connect the following information
• Enter SCM information in the RFC
• Track the completion of RFC in Teamcenter
• Enter RFC information in NACIP
• Reconcile RFC needs with what SAP QNs that track it have
• Create associated reports
• Communicate status to management and other departments
• Follow up on DERs answers to Discrepancies

Education, Work Experience, Certification and/or Licensure:
• BS in Data Management / Business Administration / Engineering
• Mininum of 5 years working with FAA related processes of conformity inspection
• Excellent data analysis and communication skills
• Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
• Proficient user of Microsoft Office tools, especially Excel

Knowledge, Skills, and Abilities:
• Ability to adapt to and work effectively within a dynamic environment
• Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations;
• Ability to present effectively to diverse and demanding audiences.

Personality requirements:
• Persistent
• Excellent negotiation skills
• Reliable
• Self motivated
• Pro-active
• Focused
• Works well in teams and minimum supervision
• Flexible
• Goal and detail oriented

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: $40-$65.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 09/10/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 3

Description:
An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

Engineering Technician 3 duties:

* Support engineering activities such as, test, check-out, modification, fabrication and assembly of
prototype electro mechanical systems, experimental design circuitry, or specialized test
equipment.
* Assemble, test, and debug test fixtures and informal test procedures.
* Perform calibration checks on electronic instruments; troubleshoot an electronics system to
determine cause and remedy for malfunctioning.
* Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
perform testing, checkout and trouble-shooting functions with minimum supervision.
* Perform compliance testing to industry and customer-defined requirements on new and legacy
electromechanical devices.
* Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
test programs, oscilloscopes, signal generators and specialized test apparatus.
* Provide work leadership to lower level technicians.
* Perform other duties as assigned.

EDUCATION AND EXPERIENCE REQUIRED

* Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
schooling and experience required.
* Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
testing.
* Aptitude and experience in board level testing and component level troubleshooting, repair, and
rework.
* Experience in using computer based tools and procedures to perform, document, and track
testing.
* Must have experience with power supplies and logic systems.
* Excellent test and troubleshooting skills and independent judgment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313811
Job Location: Kirkland, wa
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/30/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan with one of our Space clients. You will be responsible you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. Six years of experience is required with an Associates Degree in a related field of study.

Engineering Technician III Job duties:
* Use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure systems and components meet established specifications.
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements.
* Completes parts lists, checks drawings in accordance with released engineering.
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware.
* Assists as required during inspection verification or modification/maintenance procedures.

Qualifications:

* 6 years of relevant experience.
* Associates Degree in related field of study.
* Higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* Experience supporting an Aerospace and Defense Industry.
* Previous experience in a manufacturing environment.

Preferred:
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314683
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan with one of our Space clients. You will be responsible you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. Six years of experience is required with an Associates Degree in a related field of study.

Engineering Technician III Job duties:
* Use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure systems and components meet established specifications.
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements.
* Completes parts lists, checks drawings in accordance with released engineering.
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware.
* Assists as required during inspection verification or modification/maintenance procedures.

Qualifications:

* 6 years of relevant experience.
* Associates Degree in related field of study.
* Higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* Experience supporting an Aerospace and Defense Industry.
* Previous experience in a manufacturing environment.

Preferred:
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314682
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining equipment, components, devices, or systems. To be considered for this role, you will have an Associate's degree and typically 6 years of relevant experience.

Engineering Technician III Job duties:

* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions

Qualifications:

* Associate's degree in a related field of study and at least 6 years of relevant experience
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314623
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/24/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Trade Compliance Specialist(Remote)

Description:
A Senior Trade Compliance Specialist job is currently available at Belcan in Cincinnati, OH or may be worked remotely. This is a full time, direct job with full benefits. Great matching candidates will have work experience performing Jurisdiction & Classification. You will be performing Jurisdiction & Classification to ensure Trade Compliance in areas like aerospace and defense as well as verifying the correct Jurisdiction & Classification by junior team members.

Senior Trade Compliance Specialist job duties:
* Perform Jurisdiction and Classification (J&C) in customer systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services.
* Gather information to ensure the proper jurisdiction, determination and classification of products
* Verify that the proper jurisdiction, determination and classification is being performed by other team members.
* Work within a team to perform duties with regular correspondence
* Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary

Qualifications:
* Knowledge and experience with import/export Trade Compliance procedures and regulations
* Detail oriented, good organizational skills and the ability to prioritize with changing situations
* Ability to recognize and solve typical problems and select solutions from established options
* Good interpersonal, verbal and written communication skills to drive tasks to completion
* Knowledge of MS Office Suite
* Bachelor's degree or equivalent experience relevant to functional area
* US citizenship required
Desired but not required skills:
* 4-year Bachelor's degree, Bachelors of Science in Engineering or related degree preferred.


If you are interested in this Senior Trade Compliance Specialist job in Cincinnati, OH please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com


 
Job Number: 314282
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/06/2021
Last Updated: 04/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: SarahVallejo
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Electrical Engineer

Description:
A FPGA Electrical Engineer job is currently available at Belcan in Lexington, KY. This is a full time, direct job with full benefits. Great matching candidates will have a Bachelor's Degree in Electrical Engineering (or similar), with at least five years of experience with FPGA design & programming. You will be participating in FPGA design from requirements development to hardware implementation for the aerospace and defense markets.

FPGA Electrical Engineer job duties:
* Program requirements decomposition, analysis, definition, and traceability using tools such as DOORS or equivalent.
* Program requirements verification (acceptance test plans, test reports, analysis reports, inspection reports) and validation for regulatory approval (example: avionics certifications using DO-254).
* Support hardware requirement generation with systems and subsystems teams to determine meaningful and testable requirements for the design, preferably in a model-based system engineering environment (MBSE).
* FPGA programming/development in Verilog/VHDL/System Verilog.
* Assist in electrical design and development, PCB Design and layout, wiring/harnesses, performance, risk, safety, operation and design reviews.
* Electrical Hardware in loop testing.

Qualifications:
* Bachelor of Science Degree in Electrical Engineering, Computer Engineering, or related STEM field.
* Five to 10 years' experience focused on FPGA development or electrical/hardware development/integration (preferably within the aerospace software/systems, power systems, or complicated technical systems area)
* Required experience in Verilog/VHDL/System Verilog
* Familiarity with design/analysis of electrical systems for EMI/EMC compliance
* Atlassian tools experience (JIRA, Confluence, Git)
* Experience in LINUX / RTOS (including Red Hat)
* Scripting, Programming and Analysis: TCL, Python, Linux shell and Windows batch scripting; C / C++; MATLAB / Simulink, Rhapsody CAMEO MagicDraw, Python, HSPICE and HFSS (or similar modeling/analysis tools)
* Legal authorization to work in the US required: US Citizenship due to nature of the work
Desired but not required:
* Regulatory experience preferred: DO-254, DO-160, Mil 704, 461, 464 or similar automotive standards
* Ability to deal with ambiguity, to be adaptable, to work across multi-discipline teams, solve complex problems and to drive results

If you are interested in this FPGA Electrical Engineer job in Lexington, KY please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 312292
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/06/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA/ASIC Designer - Secret Clearance Required

Description:
FPGA/ASIC Designer - Secret Clearance Required

Location: Orlando, FL & Remote

Job ID: #62072



Citizenship Requirement: U.S. Citizen

Security Clearance Level:  Secret with background investigation in last 6 years (S-6)

Min years of experience:

11 with B.Sc. or 9 with M.Sc.

Degree Requirements: B.Sc. in Electrical Engineering or Computer Engineering



Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development. Determines architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.



Seeking Electrical Engineer with DFT (Design for Test)/ DFD (Design for Debug) / DFM (Design For Manufacture) experience. The successful candidate will be responsible for the design, implementation, and verification of DFT/DFD/DFM, as well as mentoring and growing talent in the discipline. This individual will be considered a Subject Matter Expert (SME) in techniques such as Scan, MBIST/MBISR, Boundary Scan, ATPG, Logical Equivalence Checking, and Gate Level Simulation.



Successful candidate will work with the digital design and physical implementation teams to capture DFT requirements, develop and implement DFT architecture, work with the verification team to verify DFT implementations, generate structural test vectors, analyze and improve coverage/test time/test cost, work with designers on Static Timing Analysis (STA), physical, power and logical issues impacting DFT, work with Integration & Test as well as Foundry representatives to bring up test vectors on silicon, and develop and execute schedules related to these tasks.



Typical Minimums:

Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 14 years or more of professional experience; or 12 years of professional experience with a related Masters degree. Considered an expert, authority in discipline.



Basic Qualifications:

• Secret plus 6 year background investigation (S-6)

• Bachelor’s Degree in Electrical Engineering or Computer Engineering with 11+ years of professional DFT experience or 9+ years of experience with a related Masters degree

• Industrial standards and practices in DFT, including ATPG, JTAG, MBIST/MBISR and trade-offs between test quality and test time

• Developing DFT specifications

• Industry standard DFT and design tools

• Debugging ATPG/MBIST patterns

• STA constraints and their interaction with DFT



Desired Skills:

• Experience with Synopsys or Cadence DFT tools

• Experience with JTAG and IEEE standards 1149.1 and 1149.6.









____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62072
Job Location: Orlando, FL
Per Diem: Possible
Start Date: ASAP
Input Date: 09/02/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
General Maintenance Worker

Description:
Job details: SCA_General Maintenance Worker
Job location: Coronado Island, CA
Job duration: 8/23/2021 to 2/25/2022
Job clearance: Must have Secret Clearance to start

Job Clearance:
The General Maintenance Worker performs general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but not proficiency) in such trades as painting, carpentry, plumbing, masonry, and electrical work. Work involves a variety of the following duties: replacing electrical receptacles, wires, switches, fixtures, and motors, using plaster or compound to patch minor holes and cracks in walls and ceilings, repairing or replacing sinks, water coolers, and toilets painting structures and equipment; repairing or replacing concrete floors, steps, and sidewalks, replacing damaged paneling and floor tiles, hanging doors and installing door locks, replacing broken window panes, and performing general maintenance on equipment and machinery. Excluded are: a. Craft workers included in a formal apprenticeship or progression program based on training and experience; b. Skilled craft workers required to demonstrate proficiency in one or more trades; c. Workers performing simple maintenance duties not requiring practical skill and knowledge of a trade (e.g., changing light bulbs and replacing faucet washers).
 
Job Number: CJH-6406-1
Job Location: Coronado Island, CA
Rate: $24.59/hr
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
General Maintenance Worker

Description:
Job details: General Maintenance Worker
Job location: Coronado Island, CA
Job duration: 8/23/2021 to 2/25/2022
Job clearance: Must have Secret Clearance to start

Job Clearance:
The General Maintenance Worker performs general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but not proficiency) in such trades as painting, carpentry, plumbing, masonry, and electrical work. Work involves a variety of the following duties: replacing electrical receptacles, wires, switches, fixtures, and motors, using plaster or compound to patch minor holes and cracks in walls and ceilings, repairing or replacing sinks, water coolers, and toilets painting structures and equipment; repairing or replacing concrete floors, steps, and sidewalks, replacing damaged paneling and floor tiles, hanging doors and installing door locks, replacing broken window panes, and performing general maintenance on equipment and machinery. Excluded are: a. Craft workers included in a formal apprenticeship or progression program based on training and experience; b. Skilled craft workers required to demonstrate proficiency in one or more trades; c. Workers performing simple maintenance duties not requiring practical skill and knowledge of a trade (e.g., changing light bulbs and replacing faucet washers).
 
Job Number: CJH - 6406-1
Job Location: Coronado, Islands, CA
Rate: $24.59/hr
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 08/18/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware engineer

Description:
Description:
Engineer will have the opportunity to research, develop, design, and test electrical components, equipment, and systems related to Pulsed Power, High Power Microwaves (HPM) and Directed Energy Systems.
We are seeking candidates with laboratory experience in High Voltage or Microwave tube technology.
This position supports counter UAS contracts with additional support to CRAD and IRAD activities in the RF Directed Energy Program Office.

Mandatory Requirements:
Must be able to sit onsite at facility.
Ability to obtain active secret clearance.
Minimum 5-10 years experience.
We are seeking candidates with laboratory experience in High Voltage or Microwave tube technology.
This position supports counter UAS contracts with additional support to CRAD and IRAD activities in the RF Directed Energy Program Office.
 
Job Number: CJH-M-3244
Job Location: GRAND PRAIRIE, TX
Rate: $90
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
The primary responsibilities will include leading a small team to install and maintain aircraft instrumentation, the telemetry system, and a control room to support flight testing of aircraft.

Responsibilities:
• Lead a small team of engineers and technicians in supporting ground and flight test operations
• Own the installation, calibration, troubleshooting, and preflight inspections of the aircraft instrumentation and telemetry systems
• Own the development and configuration management of the control room IADS displays
• Develop processes and tools that support the collection and export of test data from a variety of sources including aircraft on-board logs, telemetry recordings, and simulator sessions
• Work with flight test and engineering teams to develop test plans, instrumentation requirements, and control room displays to support real-time test monitoring
• Support instrumentation checkout and calibration during aircraft integration, ground, and flight testing
• Contribute to test card development and review in collaboration with other engineering disciplines and flight test personnel
• Support the development of scripts and configuration management tools
• Support test readiness reviews, pre-flight checks, and pre/posttest briefings
• Provide mission control room support and make real-time decisions regarding safety, efficiency, and effectiveness
• Conduct and contribute to pre-flight and post-test data analyses to support anomaly identification and resolution

Required Knowledge, Skills, and Abilities:
• A Bachelor's degree in a science or engineering program
• 5+ years industry experience with leadership role experience
• Experience with the design, integration and/or troubleshooting of electrical or instrumentation systems
• A working knowledge of sensors and flight test instrumentation, analog and digital I/O, and data synchronization
• Ability to read and create wiring diagrams and troubleshoot wiring on test bench or on vehicle
• Experience working with scripting languages and working on a Linux command line
• Experience with aircraft telemetry systems
• The ability to travel to support the job duties
• Excellent communication skills

Preferred Knowledge, Skills, and Abilities:
• Experience interfacing with I/O hardware including analog, discrete, and serial data
• Experience with IADS flight test display software
• Experience with aircraft telemetry systems
• Experience with revision control systems
• Previous experience with new, experimental, or modified aircraft, launch vehicles or spacecraft
• Ability to work irregular hours and work days
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience with homebuilt aircraft and experimental aviation a plus

Degrees and Certifications:
• An undergraduate degree in a STEM field is required
• A master’s degree in Aerospace or Electrical Engineering is preferred
• Pilot's license and/or Aircraft Mechanic (A&P) license is a strong plus
 
Job Number: 45-017
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 07/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315149
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/12/2021
Last Updated: 03/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic

Description:
A Maintenance Mechanic position located in San Diego, CA is currently available through Belcan. In this role, you will perform and assist in installing, servicing and maintaining in operating condition all equipment as directed.

Responsibilities:
- Make routine, periodic or special instructions to determine the necessity of the repair and maintenance of plant machinery and equipment.
- Use of manufacturers' drawings and specifications, installation layouts and sketches to facilitate internal handling of less than major repairs.
- Materials generally lightweight to medium weight carried anywhere from 1 to 200 ft.
- Materials lifted floor level, waist level and overhead.
- Use of ladders, hoists, electrical carts and forklifts.
- Assists in the installation, servicing and maintenance of all plant equipment.
- Performs preventative maintenance on all plant machinery and equipment to make periodic inspections
- Maintain accurate paperwork and records.

Qualifications:
- High School education or the equivalent
- 3 - 5 years of related experience.
- Must have complete knowledge of industrial mechanics and have industrial electrical (pneumatic and hydraulic) experience.
- Must be able to read and interpret blueprints and wiring diagrams.
- Must know how to use and care for related test equipment.
- Must know how to operate maintenance shop equipment.
- Must be able to weld, cut, braze and solder, as well as, operate a forklift and overhead crane.
- Must possess basic skills in carpentry, plumbing and rigging.

If you are interested in this Maintenance Mechanic position located in San Diego, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313746
Job Location: San Diego, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/26/2021
Last Updated: 11/02/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician Lead

Description:
Belcan has a job for a Maintenance Technician Lead located in Tucson, AZ. The Maintenance Technician Lead is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. Acts as a senior material handling technician on all equipment that is installed at a specific site location. Provides assistance and mentors lower-level employees.

Key Responsibilities:

* Repair and maintenance of MHE including belt tracking, component adjustment/replacement, component lubrication, etc.
* Completes preventative maintenance routines, documentation, and procedures.
* Use electrical test equipment to troubleshoot electrical circuitry.
* Create and close work orders into asset management system with appropriate data to include labor hours, equipment maintenance, and parts used.
* Troubleshoot conveyance problems and understand resources needed to resolve them.
* Locate and track spare parts from inventory.
* Performs complex maintenance and equipment testing to ensure they meet specifications.
* Helps with training customers to operate equipment.
* Respond to service calls and correct equipment failures and faults.
* Identify problems as they occur and take appropriate steps to solve them.
* Develop and maintain positive working relationships across all levels of the organizations.

Qualifications:

* HS diploma or equivalent required. Associate degree or vocational technical training preferred. Specialized skill training/certification preferred.
* Demonstrates a senior-level knowledge of a technical or specialty area.
* Proven experience in area of responsibility and successful demonstration of position and key tasks as presented above.
* 10+ years of Electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics, and control panels
* Mechanical experience with gearboxes, sprockets, chains, bearings, guide rollers, and other related equipment
* 5+ years of experience with a sorting machines.
* Servo drives, PLC, PC controllers, dc power supplies, optical devices (i.e., encoders, photoeyes, etc.
* Knowledge of automated equipment; preferably automated material handling systems. Some experience with Allen-Bradley RSLogix5000 PLC controls platforms
* Some experience with DeviceNet, PROFIBUS, Ethernet, or equivalent network communications is a plus
* MS Office products

If you are interested in this Maintenance Technician position in Tucson, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315508
Job Location: Manteca, AZ
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/21/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance, Machining, & Automotive Tooling Advisor

Description:
A Maintenance, Machining, & Automotive Tooling Advisor job is currently available through Belcan in the domestic U.S. This job is a remote position that will travel and deploy to customers within manufacturing and supply chain environments. As critical project issues and needs for crisis intervention arise, this job will deploy to these customers. This job is a flexible, subcontract 1099 status. Great matching candidates will have strong manufacturing and supply chain leadership and supervisory skills capable of driving measurable solutions and outcomes for clients. In this job, you will be on site at customers and/or customer suppliers working to assess, mitigate, consult, identify, and administer outcomes.

Maintenance, Machining, & Automotive Tooling Advisor

Job Title job duties:
· Responsible for developing & implementing systems & procedures that increase operating equipment effectiveness (OEE), including rigorous PM, TPM and Lock Out/Tag Out processes.
· Develop & maintain systems to capture equipment performance & maintenance history.
· Provide experience and expertise in evaluating, analyzing, and providing solutions to complex tooling and crib issues.
· Perform supplier tooling audits, cost analytics and onsite reviews.
· Use data to prioritize and schedule work, make replacement decisions, monitor productivity
· implement capital expense projects designed to improve safety, efficiency or to satisfy compliance requirements.
· Direct & monitor activities of the maintenance & engineering teams.
· Ensure that facility is operating in compliance (equipment, methods, reporting and permits) with regulatory body and company requirements.
· Estimate Tooling Costs, track tooling and equipment, and troubleshoot processes issues to maintain production operations.
· Working knowledge of environmental & OSHA regulations and the ability to manage multiple projects.

Qualifications:
· Knowledge and experience with manufacturing, maintenance, tooling, machining, repair, etc.
· Experience with tool/fixture/mold design, maintenance, repair.
· CNC programming and operator experience using G and M codes.
· Good knowledge of mechanical and electrical maintenance procedures, lock out tag out, as it relates to manufacturing environment.

If you are interested in this Maintenance, Machining, & Automotive Tooling Advisor job that is remote and travels, please apply via the 'apply now' link provided.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 314441
Job Location: Detroit, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/29/2021
Last Updated: 02/06/2023
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost.
• The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling.
• The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
• Analyze a variety of engineering data to help determine requirements to meet objectives
• Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
• Work on various product and process flow segments of developmental projects
• Conduct RCCA tests or experiments, record and evaluate data and report findings
• Responsible for process capability studies, test capability studies, & through-put rates
• Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Identify and develop specifications for purchase and installation of new capital-equipment
• Work with engineers and other personnel on continuous improvement projects as required
• Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
• Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
• Promote and contribute to overall team environment
• Review and development of specifications and processes applicable to aircraft electrical systems
• Procedure documentation for assembly/fabrication/operation of new or existing components
• Evaluates/improve assembly and testing methods
• Adhere to production times, staffing requirements, and related costs on quality control and industry standards
• Assist in identifying and evaluating suppliers for new or critical processes & components
• Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
• B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
• Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
• Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
• Must have a strong working knowledge of the following:
   o Evaluating and approving engineering design data (drawings, specifications, etc.)
   o Participating in design reviews and providing technical feedback
   o Design for manufacture-ability and design for assembly
   o Identifying the need for tooling and presenting technical requirements
   o Developing build plans based on installation drawings
   o Proposing design changes based on RCCA findings
   o Organizing and presenting technical information to all levels of management
• Strong communication skills
• Basic CATIA V5 experience is a plus
• Strong knowledge of design/drafting practices
• Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
• Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
• The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
• The ability to read and interpret engineering drawings and/or specification requirements
• Excellent problem solving skills and the ability to work in a diverse environment
• Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
• Employee must have ability to work independently and multitask with a strong work ethic
• Time management and prioritization of assignments
• Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
• Ability to work in a constant state of alertness and safe manner

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-025
Job Location: Greensboro, NC
Rate: $40-$50/hr
Per Diem: Possible
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Electrical

Description:
General Summary:

Performs Manufacturing Engineer assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager/Assistant Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery to coordinate with other departments, outside organizations, customers, and suppliers, to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer employee, also has the ability to develop solutions for production problems relating to electrical, harnesses and avionics, manufacturing processes, and/or tooling. The employee must be highly analytical, innovative and be a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines



Duties and Responsibilities:

Analyze a variety of engineering data to help determine requirements to meet objectives
Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
Work on various product and process flow segments of developmental projects
Conduct RCCA tests or experiments, record and evaluate data and report findings
Responsible for process capability studies, test capability studies, & through-put rates
Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
Identify, and develop specifications for purchase and installation of new capital-equipment
Work with engineers and other personnel on continuous improvement projects as required
Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
Promote and contribute to overall team environment
Review and development of specifications and processes applicable to aircraft electrical systems
Procedure documentation for assembly/fabrication/operation of new or existing components
Evaluates/improve assembly and testing methods
Adhere to production times, staffing requirements, and related costs on quality control and industry standards
Assist in identifying and evaluating suppliers for new or critical processes & components
Assist purchasing in resolving supplier technical questions, drawing and specification interpretation



Education, Work Experience, Certification and/or Licensure:

B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
Minimum 8 years aerospace industry experience in electrical & avionics design evaluation, build and installation
Strong Knowledge of industry standards, processes and specifications related to aircraft electrical systems
Must have a strong working knowledge of the following:
Evaluating harness designs
Harness routing considerations
Connector & pinning configurations
LRU placement, orientation and mounting scheme
Proposing design changes based on RCCA findings
Organizing and presenting technical information to all levels of management
Strong communication skills
Basic CATIA V5 experience is a plus
Strong knowledge of design/drafting practices
Design for manufacturability
Basic level GD&T proficiency in reading/understanding engineering drawings


Knowledge, Skills and Abilities:

Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of details, assemblies, and installations
Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
The employee may be asked to participate in activities to enhance and support production teamwork, and provide an environment for all team members to participate in continuous improvement
The ability to read and interpret engineering drawings and/or specification requirements
Excellent problem solving skills and the ability to work in a diverse environment
Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
Employee must have ability to work independently and multitask with a strong work ethic
Time management and prioritization of assignments
Willingness to work outside of assigned areas (mechanical systems, structures, interiors, etc.)


The Structures Company LLC is an AA/EOE.
 
Job Number: 484
Job Location: Greensboro, NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year+
Start Date: 4-6 Weeks
Input Date: 08/09/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - DIRECT POSITION

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (flight control systems, doors, landing gear, hydraulics), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $65-$88K **DOE**
Overtime: Possible
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 09/20/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineers for Goleta or Oxnard, CA

Description:
Manufacturing Engineers
Goleta, CA OR Oxnard, CA
1 year contract
US Citizenship REQUIRED
Secret clearance NOT required
Drug Test
Background Check
Proof of US Citizenship WILL be required

Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Ensures processes and procedures are in compliance with regulations.

Please see managers comments:

• Since this is a Manufacturing Engineering position, they should have a minimum of a BS in Engineering (any engineering major is fine). This is not necessarily a requirement to perform the job as a Contract Engineer, but this would be a requirement if they are successful as a contract hire and we decide to convert them to be permanent. Based on how fast we are growing, I only want to hire people on contract that have a potential of becoming a permanent employee.

• They should have thorough mechanically / electrically oriented manufacturing engineering experience (ideally in the Aerospace industry). Some of the resumes indicate that they have ME experience, but it is in food or chemical. Also, some resumes show that they have manufacturing engineering experience as a planner, but not technical manufacturing engineering experience solving problems or responsible

• It is also important for them to have completed a significant manufacturing engineering project, ideally one where they led a team to accomplish the individual project tasks.
• They also need to have problem solving experience, even better to be green belt or black belt certified.

=====
If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss.
 
Job Number: PL Mfg Goleta
Job Location: Goleta or Oxnard, CA
Rate: $60/per hour
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 2-3 weeks
Input Date: 05/21/2021
Last Updated: 01/26/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Job Title: Mechanical Design Engineer (Contract- Hire)

TriMech is hiring for a senior mechanical engineer to provide mechanical product design, electronic packaging, and enclosure design of chemical and biological sensor packages.

Responsibilities:

Electronic packaging and enclosure design of small electronic systems or sensors
Utilize 3D CAD tools to provide mechanical product design of required systems with the goal of miniaturization of existing systems.
Develop initial prototype designs that will be build and tested
Work with program team to ensure Thermal Management and Power Management
Focus on the miniaturization of existing sensor packages
Required Skills:

5-10 years of experience in mechanical product design, electronic packaging, and enclosure design.
Experienced design of electro/mechanical components and systems.
Proven experience design chemical sensor or related electronic products
Highly experienced with SolidWorks 3D modeling and analysis tools.
Proficiency in MS Office products like Excel, Visio, and Word.
Demonstrated ability to effectively manage multiple priorities simultaneously and meet critical deadlines in a fast-paced environment.
Knowledgeable in DFM/A techniques and able to develop designs that incorporate these techniques.
Excellent verbal, written and graphical communication skills
Education Requirements:

BSME or Physics Degree


TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.
 
Job Number: 10441
Job Location: Belcamp, MD
Rate: Hourly
Per Diem: Possible
Overtime: Possible
Duration: 6-8 months
Start Date: ASAP
Input Date: 09/06/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Mike Ayres
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer, Completions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
o Proficient in Catia V5
o Proficient in Smarteam
o Experience designing aircraft Interior components, furnishings and Interior Installations required (eg: galleys, lavatories, liners, personal service units, etc)
o Experience of routing plumbing on various monuments
o Electrical Harness Installation (EHI) experience also a plus.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field.
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule.
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-558
Job Location: Savannah, GA
Rate: $65-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Responsible for the Mechanical design, integration, manufacturing and testing of hardware and subsystems for Electronic Warfare products. Product technologies include complex digital electronics, RF circuits, analog circuits, mechanical chassis and packaging, cabling and backplanes, and environmental testing.

Must be Eligible for a Secret Clearance

Preferred
Must be able to collaborate with Electrical, Systems Engineering, Operations, Procurement, Quality, and PMO to develop a product. Must have a technical background in Mechanical Engineering and had prior practical design experience on development programs. Other experience preferred: Working knowledge of technical risk management. Developing and making presentations that communicate and influence. Facilitate team building, collaboration and coordination.
 
Job Number: 36969
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 09/14/2021
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
A Mechanical Engineer role located in Redmond, WA is currently available through Belcan. The Mechanical Engineer will lead all aspects of product development from concept and initial prototyping through commercialization by applying advanced engineering skills, cross-functional collaboration, and design control principles.

Mechanical Engineer job duties:

* Research, develop, design, and evaluate mechanical and electro-mechanical medical device
designs to satisfy clinical requirements.
* Engage directly with surgeon customers to assess product performance, gain insights and
implement refinements.
* Ability to understand customer unmet needs and translate into product requirements.
* Perform rapid prototyping and feasibility studies to refine and verify design and functionality.
* Design complex components and assemblies capable of achieving overall device performance
specifications, regulatory and manufacturing requirements.
* Develop analytical models and design of experiments to study, evaluate, or investigate designs.
* Assess, write, and submit intellectually property to support innovative product design
implementations.
* Provide technical and project direction to cross-functional team members.
* Support quality investigations into product lines, identify design issues, and implement design
improvements.
* Perform design verification and production transfer.

EDUCATION AND EXPERIENCE REQUIRED

* Advanced degree in a relevant engineering or technology field
* Advanced product design skills.
* Advanced skills in customer engagement, identifying customer needs and preferences.
* Knowledge of trends in surgical products, and latest ophthalmic and surgical market trends.
* Expert knowledge of mechanical and electromechanical design, manufacturing, processes, and
trends.
* Expert knowledge of cross-functional product development in medical device or related fields.
* Deep technical expertise in all aspects of technology and engineering related to
electromechanical devices.
* Deep understanding of current and upcoming technologies and trends in consumer electronics.
* Up-to-date understanding of general trends in technology, informatics, medicine, healthcare,
government, and environment.
* Advanced negotiations and influence skills.
* Working knowledge of healthcare regulatory requirements and best practice implementation.
* Advanced leadership skills or potential.

If you are interested in this Mechanical Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.




 
Job Number: 315228
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/12/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III

Description:
Inconen is looking for an NC Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Experience with CATIA, SmarTeam, Vericut software preferred. Experience with Mazak CNC equipment preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Position Purpose:
1. Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions:
1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
5. Develop operator set-up sheets for numerical control machines.
6. Develop flat pattern mylars and templates as required.
7. Produce 2-D Catia tool drawings as required.
8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Assist in training and guiding lower-level engineers as needed.
2. Assist in formulating Numerical Control policies, procedures, and specifications as required.
3. Perform other duties as assigned.

Other Requirements:
1. Excellent verbal and written communication skills required.
2. Strong knowledge of various machining and drafting methods, technical writing, and computer use.
3. Ability to read and interpret complex blueprints and engineering drawings.
4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 16786
Job Location: Savannah, GA
Rate: $58.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/27/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III

Description:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Unique Skills:
Experience with CATIA, SmarTeam, Vericut software preferred. Experience with Mazak CNC equipment preferred.

Education Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Principle Duties And Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
• Assist in training and guiding lower level engineers as needed.
• Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Additional Requirements:
• Excellent verbal and written communication skills required.
• Strong knowledge of various machining and drafting methods, technical writing, and computer use.
• Ability to read and interpret complex blueprints and engineering drawings.
• Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
• Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 24-597
Job Location: Savannah, GA
Rate: TBD
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 08/27/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer / ECAD Librarian

Description:
A PCB Designer/ECAD Librarian job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for performing detailed design and documentation of mechanical components or subsystems. You will also manage your own design sub-tasks in support of the duties within the project assigned. To be considered for this role, you will have an Associate's degree in a related discipline, plus a minimum of 7 years of relevant experience. Due the nature of the work performed in this facility, US citizenship is required.

PCB Designer/ECAD Librarian Job duties:

* Contributes to design and documentation of semi-complex electrical components as active member of project team.
* Produces two-dimensional (2D) or three-dimensional (3D) CAD work product output for fabrication and assembly.
* Generates mechanical designs considering material requirements and functional characteristics.
* Generates and checks semi-complex to complex drawings.
* Performs tolerance analysis studies as required.

Qualifications:

* A minimum of seven years of experience in PCB design.
* A minimum of two years of experience in ECAD/PCB/EDA library development complainant to IPC 7351 a must.
* Experience using Mentor Graphics Expedition/xDM tool suite a must.
* Experience with a parts request system and library management practices.
* Experience with and understanding of the ECAD/PCB layout design processes.

If you are interested in this PCB Designer/ECAD Librarian position in McLeansville, NC please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316120
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB/PWA Designer – Level 3 / Level 4

Description:
Inconen is looking for a PWB/PWA Designer – Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Must have Altium Designer experience and Windchill experience is preferred**

Duties:
-The primary duty is to generate PWB designs on AR-provided Altium PWB Design Tools for applications on various Space and Defense programs.
-This assignment will require an experienced individual that can work closely with electrical/electronic circuit designers and electro-mechanical designers in a team environment.

Skills:
-Extensive (10+ years) experience in the design, development and generation of PWB drawings.
-Experience in the use of S/W tools associated with PWB design is required and the ability to operate the -Altium Designer tool is mandatory.
-Experience in Windchill is also desirable.

Education:
-BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
 
Job Number: 16878
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Paint Equipment Design Engineer

Description:
A Paint Equipment Design Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for driving development and continuous improvement of equipment, paint process and standards with the Paint Shop. To be considered for this role, you will have a Bachelor's degree in Industrial, Mechanical, or Electrical Engineering plus a minimum of 3 years of experience in a technical engineering role.

Paint Equipment Design Engineer Job duties:

* Perform root cause analysis on equipment bad actors and major unplanned downtime. Develop and implement solutions using problem solving analysis such 8D and several other tools.

* Work in a team of engineers and technicians as an in-house integration team that scopes and executes projects from concept through to start-up and commissioning.
* Become subject matter expert on all equipment - mechanical, electrical, instrumentation and controls - and train other engineers and technicians in the paint shop.
* Takes initiative to create, implement and improve PM documents and schedules, under the direction of the maintenance management.
* Perform major equipment repairs and rebuilds, (some weekends and holidays required).

Qualifications:

* Knowledge on paint processes and robot programming (Durr equipment is a plus).
* Skilled with the use of a variety of hand and portable tools, as well as general machining and welding.
* Able to read and interpret mechanical drawings and electrical schematics.
* Willing to perform shift work (nights) and overtime as required.

If you are interested in this Paint Equipment Design Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308796
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/27/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Instrumentation Engineer

Description:
In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.

Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.

This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.

Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:

Define requirements for onboard data acquisition and telemetry system
Direct small team of engineers & techs to meet the needs of the program
Design and implement hardware and software solutions for ground and flight test
Work closely with vendors and partners
Install sensors, wiring, an any required electronic equipment in experimental test vehicle
Generate and review wiring diagrams, bill of materials, and installation drawings
Prepare data system for daily test execution
Calibrate, validate, document, and troubleshoot all installed sensors and equipment
Participate in ground, bench, and flight tests.
Data capture, storage, processing and analysis.
Draft proposals, cost estimates, plans, reports, and other documents as required
Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
Qualifications:

10+ years instrumentation experience in experimental flight test
Experience leading an instrumentation effort is strongly preferred
Experience in Data Acquisition and software integration
Applicant must have experience using MS Excel, and MS Word
Applicant must demonstrate good technical writing skills
Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
Fluency in written and spoken English is required
Education:

B.S. in Electrical Engineering or equivalent.

The Structures Company LLC is an AA/EOE.
 
Job Number: 498
Job Location: Arlington, WA
Rate: Up to $80/Hr., DOE
Per Diem: Possible
Duration: 6-12 Months, possibly longer
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 12/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 2 - Liaison Engineering

Description:
Description

Applies basic knowledge of design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer. Analyzes, conducts failure analysis, root cause analysis and troubleshoots to understand root cause. Provides assistance to identify solutions. Provides written dispositions for routine design non-conformances. Supports activities to identify deviations that could impact design intent and safety and product/process improvements. Develops routine customer correspondence for continued safe operation and maintenance of equipment. Participates in Material Review Boards and Integrated Product Teams (IPTs). Ensures supplier and build partner comply with Boeing standards. Represents the engineering community in the build through post production environment. Recommends simple non-destructive test procedures, tools, standards. Conducts simple static strength analysis to validate interim design repairs meet original design loads criteria.

Required Skillsets:
1+ years of hands Electronics troubleshooting experience
ENG Degree Required

Preferred:
RF Experience

Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46182-1
Job Location: Heath, OH
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 09/23/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5 - 10 Openings

Description:
10 Liaison Engineer / MRB Engineer Openings Available
Good OT Available

Applies knowledge of design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with company standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

The ideal candidate will possess a general knowledge of manufacturing operations. Tasks are generally urgent with short flow time requirements.

Position Responsibilities
Duties will include (but are not limited to):
• Applies knowledge of design principles to assess and resolve product/process issues through the product lifecycle.
• Analyzes, conducts root cause analysis and develops dispositions for design non-conformances.
• Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
• Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
• Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
• The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
• Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
• When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

Basic Qualifications (Required Skills / Experience):
• Candidates must be willing to work on 1st, 2nd and 3rd shift along with weekends.
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “Us Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
• ABET accredited engineering degree
• Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
• Must be willing to work variable shifts, including weekends and overtime. Some positions may also be rotating shifts.
• Current or previous Materials Review Board (MRB)

Skill Set:

1. MRB
2. Structural repair
3. System troubleshooting
4. Catia and Enovia
 
Job Number: 45324-1
Job Location: North Charleston, SC
Rate: $90-105/hr
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5

Description:
Product Review Engineer 5

Location: North Charleston, SC
Duration: 8-9 Months

Description:
Applies advanced knowledge of Client design and/or engineering principles. Assesses and resolves product/process issues through the product lifecycle. Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Directs cross-functional teams to analyze, conduct root cause analysis and develop dispositions for complex design non-conformances. Leads investigations into complex multidiscipline system related events. Uses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations Assesses complex system events reports to determine potential safety issues. Analyzes reported problems for potential safety issues. Develops and implements product/process improvements. Leads development of interim and final solutions. Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT). Represents the engineering community in the build through post production environment. Oversees documentation of hardware problems. Identifies the need for technical training. Leads activities for on on-site disabled product repair teams and accident investigation or support team. Reviews and approves design and operational concepts for new designs. Designs complex jacking and shoring schemes. Leads the design of interim structural repairs and conducts static strength analysis. Develops and leads non-destructive test procedures, tools and standards.

Applies knowledge of Client design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with Client standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

The ideal candidate will possess a general knowledge of manufacturing operations.
Tasks are generally urgent with short flow time requirements.

Position Responsibilities
- Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
- Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
- Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
- The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
- Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
- When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.
- Client MRB experience required
- Current or previous Client Commercial Engineering Materials Review Board (MRB) signature authority and must have taken UPR & CPR or SOAR.

Basic Qualifications (Required Skills / Experience):
- Candidates must be willing to work on 1st, 2nd and 3rd shift along with weekends and overtime.
- ABET accredited Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
- Current or previous Client Commercial Engineering Materials Review Board (MRB) signature authority and must have taken UPR & CPR or SOAR

Education and Experience:
Degree and typical experience in engineering classification: Bachelor's and 7 or more years' experience, Master's degree with 5 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Additional Information
ENG Degree required

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Additional Job Description:
- Client Commercial Airplanes (BCA) Material Review Board (MRB) credentials required
- Computer literate
- Must be able to read and write training material/job material

Skill Set:
- MRB
- Structural repair
- System troubleshooting
- Catia and Enovia
 
Job Number: 21-11454
Job Location: North Charleston, SC
Per Diem: split
Overtime: possible
Duration: 8-9 months
Start Date: 9/24/2021
Input Date: 09/08/2021
Last Updated: 09/10/2021
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5// Multiple locations

Description:
Product Review Engineer 5

Location: North Charleston, SC
Duration: 12 Months

Description:
At client, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you’ll learn and grow, contributing to work that shapes the world. Find your future with us.

Position Responsibilities
Duties will include (but are not limited to):
- Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
- Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
- Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
- The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
- Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
- When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

Basic Qualifications (Required Skills / Experience):
- ABET accredited engineering degree
- Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
- Current or previous Materials Review Board (MRB)

Education and Experience:
Degree and typical experience in engineering classification: Bachelor's and 7 or more years' experience, Master's degree with 5 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 62E-Liaison Engineering

Additional Comments:
- Client Commercial Airplanes Material Review Board (MRB) credentials required- active or previous MRB is ok
- BDS authority considered; can transition to MRB more easily
- Computer literate
- Must be able to read and write training material/job material
- Successfully completing training OJT is a contingency

Skill Set:
MRB
Structural repair
System troubleshooting
Catia and Enovia
 
Job Location: North Charleston, SC
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/03/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
A Project Engineer job in Windsor, CT is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Aerospace, Electrical, Mechanical Engineering or similar discipline. In this role you will be responsible for providing technical leadership to a cross functional team in requirements change management, hazard/failure mode and effect analysis, system optimization and trade study analysis, component and system level specification compliance, verification test planning/execution, and certification report creation in a faced-paced, highly collaborative environment. This job is remote with travel required.
 
Project Engineer job duties include:
· Support the definition, decomposition and compliance traceability of requirements for components and subsystems within complex aerospace propulsion and life support systems. Effectively communicate requirements across all technical disciplines and levels of management
· Facilitate cross functional team collaboration in component development, system optimization, and development of certification test program plans
· Create test plans and procedures for component and system level verification and validation
· Monitor design, build, verification and validation efforts, drive team responses as required to keep plan execution to established metrics on track.
· Maintain requirements V&V compliance matrices, generate and present performance reports to client organization stakeholders
· Perform data analysis, root cause determination, and initiate corrective actions for deviation to performance, or schedule metrics on the project
· Generate and present overall project status reports to Belcan and Client organization stakeholders

Job Qualifications:
· BS or MS degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, or a similar discipline with five to ten years experience in a highly regulated industry and familiarity with integrated product development, certification, and quality control standards (ISO/IEC; 9001,9100, RTCA; DO-160, DO-254, DO-178, MIL-STD; 461,464,704)
· Skilled with communication/collaboration, modeling and analysis, requirements management, and project management tools
· Self-motivated, adaptable, highly organized and possess excellent communication skills

Desired Skills:
· Multidiscipline team building, problem solving, and leadership skills are critical
· Experience with complex system design, integration, test, and deployment is highly desirable
· Knowledge of aerospace components, controls and systems is favorable
 
 
If you are interested in this Project Engineer job in Windsor, CT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
http://belcan.com/

 
Job Number: 315444
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: KeturahCarhee
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
A Project Engineer job in Phoenix, AZ is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Aerospace, Electrical, Mechanical Engineering or similar discipline. In this role you will be responsible for providing technical leadership to a cross functional team in requirements change management, hazard/failure mode and effect analysis, system optimization and trade study analysis, component and system level specification compliance, verification test planning/execution, and certification report creation in a faced-paced, highly collaborative environment. This job is remote with travel required.
 
Project Engineer job duties include:
· Support the definition, decomposition and compliance traceability of requirements for components and subsystems within complex aerospace propulsion and life support systems. Effectively communicate requirements across all technical disciplines and levels of management
· Facilitate cross functional team collaboration in component development, system optimization, and development of certification test program plans
· Create test plans and procedures for component and system level verification and validation
· Monitor design, build, verification and validation efforts, drive team responses as required to keep plan execution to established metrics on track.
· Maintain requirements V&V compliance matrices, generate and present performance reports to client organization stakeholders
· Perform data analysis, root cause determination, and initiate corrective actions for deviation to performance, or schedule metrics on the project
· Generate and present overall project status reports to Belcan and Client organization stakeholders

Job Qualifications:
· BS or MS degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, or a similar discipline with five to ten years experience in a highly regulated industry and familiarity with integrated product development, certification, and quality control standards (ISO/IEC; 9001,9100, RTCA; DO-160, DO-254, DO-178, MIL-STD; 461,464,704)
· Skilled with communication/collaboration, modeling and analysis, requirements management, and project management tools
· Self-motivated, adaptable, highly organized and possess excellent communication skills

Desired Skills:
· Multidiscipline team building, problem solving, and leadership skills are critical
· Experience with complex system design, integration, test, and deployment is highly desirable
· Knowledge of aerospace components, controls and systems is favorable
 
 
If you are interested in this Project Engineer job in Phoenix, AZ please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
http://belcan.com/

 
Job Number: 315603
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineering Specialist

Description:
Inconen is looking for a Quality Assurance Engineering Specialist for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Candidate shall:
1. Demonstrate a working knowledge of Industry Standards developed to mitigate Counterfeit Parts and their proper application both internally, and across the supply chain
2. Demonstrate knowledge of Defense Acquisition Regulations Systems (DFARS)
3. Be able to understand/interpret customer requirements in contractual terms and conditions and incorporate appropriate roll down requirements for sub-level work and procurement
4. Lead avoidance efforts to include implementation of inspection techniques for part types and when / how to apply them
5. Demonstrate familiarity with external sources of information and notification tools (GIDEP, FAA Order 8120.16A-Suspected Unapproved Parts Notification, OASIS, ERAI, etc.)
6. Demonstrated experience with electrical/electronic components

Education and Experience Requirements:
1. Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Six (6) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Other Requirements:
1. Maintain an up-to-date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
2. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
3. Knowledgeable of the Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5.
4. Thorough knowledge of quality policies, procedures and all related technical data required.
5. Lean/Six Sigma certification as a green belt preferred.
6. Proficient computer skills.

Position Purpose:
1. Performs Quality Assurance Engineering assignments that require independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria.
2. Is required to use judgment and ingenuity in making adaptations and modifications to any standard process.
3. Is a mentor and trainer for all other Quality Assurance Engineers.
4. Considered a subject matter expert in subjects of the QAE body of knowledge.
5. Undertakes those projects that are considered complex that require independent execution within a defined set of skills or knowledge area without help or coaching from others.

Principle Duties and Responsibilities:
Essential Functions:
1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Works with management on Strategic planning for the Quality Assurance Engineering organization.
3. Interprets and executes company policies and procedures; develops new procedures as required.
4. Familiar with leadership principles and techniques when developing and organizing teams.
5. Maintains KPIs for the QAE processes to demonstrate process effectiveness and improved efficiency.
6. Promotes, encourages and leads employees towards a continuous improvement culture.
7. Review’s customer contracts on medium, moderately complex projects and responsible for requirements analysis, identification and definition.
8. Serves as QA customer interface for various oversight activities.
9. Proficient in the use and interpretation of GD&T, ASME Y14.5
10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required. by the assigned project(s).
11. Performs design document reviews as appropriate for the assigned project(s).
12. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis etc.
13. Participates in CDRL development, review and delivery to the customer as required. by the assigned project(s).
14. Utilizes industry and GAC Quality Management System concepts, policies and procedures.
15. Assists in gauging and calibration activities as necessary.
16. Participates in MRB disposition activities.
17. Proficient in the application of SPC techniques and tools such as Minitab software.
18. Communicates well, both written and verbal, with all the interfacing functions.
19. Maintains good interpersonal skills and demonstrates leadership skills necessary for the position.

Additional Functions: 1. Prepares team to meet future requirements through training and employee development activities. Perform other duties as assigned.
 
Job Number: 16756
Job Location: Savannah, GA
Rate: $45.32 - $50.35/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 11/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineering Specialist

Description:
Candidate shall:
• Demonstrate a working knowledge of Industry Standards developed to mitigate Counterfeit Parts and their proper application both internally, and across the supply chain.
• Demonstrate knowledge of Defense Acquisition Regulations Systems (DFARS)
• Be able to understand/interpret customer requirements in contractual terms and conditions and incorporate appropriate roll down requirements for sub-level work and procurement
• Lead avoidance efforts to include implementation of inspection techniques for part types and when / how to apply them
• Demonstrate familiarity with external sources of information and notification tools (GIDEP, FAA Order 8120.16A-Suspected Unapproved Parts Notification, OASIS, ERAI, etc.)
• Demonstrated experience with electrical/electronic components

Education and Experience Requirements:
Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
Performs Quality Assurance Engineering assignments that require independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria. Is required. to use judgment and ingenuity in making adaptations and modifications to any standard process. Is a mentor and trainer for all other Quality Assurance Engineers. Considered a subject matter expert in subjects of the QAE body of knowledge. Undertakes those projects that are considered complex that require independent execution within a defined set of skills or knowledge area without help or coaching from others.

Principle Duties and Responsibilities:
• Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
• Works with management on Strategic planning for the Quality Assurance Engineering organization.
• Interprets and executes company policies and procedures; develops new procedures as required.
• Familiar with leadership principles and techniques when developing and organizing teams.
• Maintains KPIs for the QAE processes to demonstrate process effectiveness and improved efficiency.
• Promotes, encourages and leads employees towards a continuous improvement culture.
• Reviews customer contracts on medium, moderately complex projects and responsible for requirements analysis, identification and definition.
• Serves as QA customer interface for various oversight activities.
• Proficient in the use and interpretation of GD&T, ASME Y14.5
• Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required. by the assigned project(s).
• Performs design document reviews as appropriate for the assigned project(s).
• Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis etc.
• Participates in CDRL development, review and delivery to the customer as required. by the assigned project(s).
• Utilizes industry and GAC Quality Management System concepts, policies and procedures. 15. Assists in gauging and calibration activities as necessary.
• Participates in MRB disposition activities.
• Proficient in the application of SPC techniques and tools such as MiniTab software.
• Communicates well, both written and verbal, with all the interfacing functions.
• Maintains good interpersonal skills and demonstrates leadership skills necessary for the position.
• Prepares team to meet future requirements through training and employee development activities.

Other Requirements:
• Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
• Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
• Knowledgeable of the Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5.
• Thorough knowledge of quality policies, procedures and all related technical data required.
• Lean/Six Sigma certification as a green belt preferred.
• Proficient computer skills.
 
Job Number: 24-593
Job Location: Savannah, GA
Rate: $45-$50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Quality Engineer

Description:
A Manufacturing Quality Engineer job is currently available at Belcan in Santa Clara, CA. This is a full time, long term contract position. Great matching candidates will have at least three years of experience in the quality engineering field ideally within the aerospace & electronics industries. You will be performing various quality engineering tasks within both shop and office settings: FAI's, inspection techniques, ISO 9001 & AS9100 quality practices, creation of standard work, supplier assessments and approvals, and root cause/corrective actions (RCCA).

Manufacturing Quality Engineer job duties:
* Creation and modification of standard work for internal quality processes
* Assist team in tracking, documenting, and dispositioning non-conforming hardware using various quality tools.
* Inspection of parts (if needed) at the customer facility, and also local third part facility.
* Engineering drawing review and approvals
* Review of FAI (first article inspection) reports and validity of part conformance
* Creation of quality notifications within SAP, with ability to disposition quality notifications accurately.
* Determine and help implement corrective action and mistake proofing
* Supplier assessments and approval
* Supplier Development

Qualifications:
* Legal authorization to work in the US required: Due to the nature of this work, US CITIZENSHIP is required
* Associate degree in Engineering (minimum)
* Three+ years of quality engineering experience within the aerospace industry
* Strong familiarity with IPC-A-610; certification desired
* Knowledge of ISO and AS9100 quality requirements
* Knowledge of manufacturing practices
* Knowledge of blueprints and supporting specifications
* Familiarity with PPAP or PFMEA's
* Familiarity of using statistical analysis (SPC)

Desired but not required skills:
* SAP knowledge
* Lean Six Sigma experience
* External (supplier) auditing experience

If you are interested in this Manufacturing Quality Engineer job in Santa Clara, CA please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 313631
Job Location: Santa Clara, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/22/2021
Last Updated: 12/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: VanessaRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Inconen is looking for a Reliability Engineer for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
-Our client is looking for a Reliability Engineer to help them oversee certain aspects of their operations.
-In this role, you will perform preventative and predictive maintenance on our tools and equipment.
-We consider these value-added tasks because they help keep our production costs down by preventing interruptions.
-You will also conduct a variety of failure mode and effects analysis (FMEA) and root cause analysis tasks, identifying potential risks to our operations and developing corrective actions.
-In this role, you will contribute to our continual improvement process and help strengthen the overall viability of our company.
-Applicants should have a bachelor’s or master’s degree in mechanical engineering.

Skills:
Required:
-Ensure the reliability of equipment and processes
-Perform preventative and predictive maintenance
-Conduct a variety of failure analyses, including root cause and fault tree analysis
-Identify risks to business operations and develop corrective actions
-Contribute to the continual improvement process

Desired:
-Bachelor’s degree in mechanical or electrical engineering; master’s degree preferred
-Professional experience in manufacturing/production and reliability
-Data analytics skills
-Mechanical and electrical aptitude
-Familiarity with Six Sigma methodology
-Analytical skills

Education:
-Bachelor’s or Master’s degree
-5+ years of related experience
 
Job Number: 15565
Job Location: Camden, AR
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Description:
The successful Reliability Engineer is required to be highly proactive and be able to handle significant responsibility.
Responsible for developing reliability predictions using approved prediction methodologies for mechanical and electrical designs.
The primary job responsibility is to perform Failure Reporting and Corrective Action (FRACAS) Analysis, and Reliability Analyses per contract requirements.
Candidate will interface with Mechanical, Electrical, and Software Engineering disciplines on a daily basis and should have strong interpersonal skills.
Candidate will spend majority of time working in a team environment, providing inputs to the software and systems engineers, performing analyses, and writing reports.

Mandatory skills:
Requires 2+ years of experience in Reliability Engineering.
Engineering Degree.
Microsoft Office, Strong interpersonal skills and an ability to build effective working relationships are a must.
Additionally, candidate must have excellent oral and written communication skills, technical writing experience, and an ability to perform oral presentations in front of large groups.
 
Job Number: CJH-M-3216
Job Location: GRAND PRAIRIE, TX
Rate: $75
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Design Engineer

Description:
A Senior Electrical Design Engineer job in Shawnee, OK is currently available through Belcan. In this role, you will design high performance and reliability electronics for high tech aerospace applications, and oversee development activities related to product qualification, approval and launch. To be considered for this role, you must be a self-starter with strong communication skills, and an understanding of EMI/EMC, MTBF and FMEA.

Senior Electrical Design Engineer Job Duties
* Design and/or development of new products based on customer specs and customer requirements
* Evaluate existing designs for incorporation into newly developed products
* Oversee product drawings, tests, and specifications for newly designed products
* Evaluate and analyze requirements for qualification procedures
* Create appropriate test flows, test designs, and analyses to incorporate design requirement verification
* Analyzing statement of work (SOW) for supporting solicitation process
* Create schematics and board layout
* Obtain, review, and maintain necessary specifications to define projects
* Perform functional and theoretical analyses on designed products
* Oversee and assist with ATP's, QTP's, customer deliverables, and SAR packages
* Maintain familiarity with a variety of latest concepts, practices and procedures
* Skilled user of Microsoft Office Products (Excel, Word) and Design software

Qualifications
* Bachelors Degree in Engineering or 15+ years of relevant experience in related field
* Analog and digital circuits capture and layout
* High speed analog acquisition
* Microcontroller and FPGA interfaces and programming
* Firm understanding of DO-160 and mil standard 810 development and testing

If you are interested in this Senior Electrical Design Engineer in Shawnee, OK, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 314645
Job Location: Shawnee, OK
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/11/2021
Last Updated: 10/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Embedded Software Engineer

Description:
A Senior Embedded Software Engineer role located in Redmond, WA is currently available through Belcan. The Senior Embedded Software Engineer will develop firmware for state of are scanned laser products. This position will be responsible for a range of development activities from initial concept development, to prototype testing, through production release. A successful candidate will work in close collaboration with Digital RTL, MEMS, Electrical engineers, and software application engineers to deliver new products.

Senior Embedded Software Engineer job duties:

* Develop firmware and embedded software across the stack from IO configuration to boot loaders
to application code for MCU, FPGA, and ASIC target
* Bring up an integration of new designs
* Design and implementation of control loops in embedded Linus and embedded real time systems
* Digital Signal Process algorithm development and optimization
* Verification testing of system performance
* Perform code reviews and provide feedback

EDUCATION AND EXPERIENCE REQUIRED

* BS or higher in Computer Science, Computer Engineering, Electrical Engineering, or related
* 5+ years of embedded software development experience
* Excellent knowledge of C and C++
* Passion for hands-on problem solving
* Proficiency in Python and/or other modern scripting and automation languages
* Familiarity with MicroC/OS or Embedded Linus
* Understanding programming/debugging real time embedded devices with ARM microcontrollers
* Knowledge of engineering best practices for the full product development lifecycle, including
design reviews, coding standards, code reviews, source control management, build processes,
and testing
* Solid communication, ability to understand complex systems and work in a fast-paced
environment
* Bootloader or Secure Boot experience a plus
* Excellent verbal and written communications skills in English


If you are interested in this Senior Embedded Software Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315574
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineering Technician

Description:
A Senior Engineering Technician job in Irvine, CA is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 1 year of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Senior Engineering Technician Job duties:

* Layout, build, test, troubleshoot, repair and modify electronic or electro-mechanical devices, assemblies, subsystems, and systems
* Construct, troubleshoot, calibrate, adjust, test, diagnose and maintain equipment, components, devices, or systems
* Calibration and alignment checks
* Prepare prescribed compounds and solutions
* Construct, modify, debug, test and adjust a variety of tools and equipment given appropriate drawings, parts and instructions
* Implement basic practical solutions for process improvement
* Conduct and document experiments under guidance of senior technician
* Construct basis tooling and fixtures to accomplish unique tasks
* Organize data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 1 year of relevant experience
* Fundamental knowledge and proficiency in the use of related tools and equipment
* Ability to fabricate simple hardware as required
* May require 1st Class FCC license and Solder Repair certification
* Clear computer and test equipment knowledge


If you are interested in this Senior Engineering Technician position in Irvine, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315535
Job Location: Irvine, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/20/2021
Last Updated: 10/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager Propulsion & Fuel Systems

Description:
General Summary:
The Senior Manager of Propulsion & Fuel Systems is responsible to lead, and manage the day to day activities of the Propulsion & Fuel Systems Engineering Team to meet Program objectives. This team is responsible for the design integration of the engine, engine control system, and fuel system with the aircraft both mechanically and electronically. This includes managing the engine and fuel systems suppliers, defining and managing mechanical and electrical interfaces, and defining requirements for aircraft cockpit displays and indications to ensure safe and compliant operation, in line with all regulatory requirements and guidance material under both normal and abnormal operating conditions.

The scope of responsibility includes New Product Development and the Sustaining activities of the existing fleet.

Duties and Responsibilities:
1. Communicates effectively in both verbal and written format. Candidate should have strong presentation skills, and able to adjust communication content and approach based on audience.
2. Manages the task execution of the team to ensure on-schedule & to requirements completion.
3. Exercises tested and proven techniques to determine problem root cause and develop corrective action plans and solutions.
4. Coaches, develops, and motivates team members to achieve full potential.
5. Ensures the team works efficiently, and produces work of a high technical standard, that is fully vetted before presenting to company leadership, company DER’s or certification authorities.
6. Has a process improvement mentality, but equally a focus on design improvement and product innovation.
7. Identifies resource problems early, takes corrective action within team, or justifies need for additional resources, or support from other teams, based on quantitative analysis.
8. Interface with engine & fuel system suppliers to manage new design or enhance existing designs to meet aircraft level performance, weight, certification and cost requirements.
9. Support supplier qualification testing, and HACI flight testing as required.
10. Able to manage the certification requirements of major and minor design change projects.
11. Set departmental objectives and conduct evaluations, to ensure team is held accountable for their personal performance.



Education, Work Experience, Certification and/or Licensure:
1. BS in a related Engineering discipline, with 10-15 years directly related experience, including 5 years in a supervisory role.
2. Previous aerospace experience at aircraft OEM and / or engine manufacturer, with experience in a similar role.
3. Some Travel may be required.

Knowledge, Skills and Abilities:
1. Familiar with industry documentation for design, test, and certification of propulsion and fuel systems
2. Familiarization with both Part 33 & Part 23 FAR requirements (Or Part 33 & Part 25)
3. Familiar with Industry standards such including DO-160, DO-178, DO-254, MIL-HDBKs and SAE ARPs, including 4761 & 4754A.
4. Familiar with analytical & design tools and processes.
5. Proven record of leading and managing diverse engineering teams to achieve objectives.
6. Proficient in Microsoft Office Products.

Physical Requirements:
1. Incumbents may be occasionally exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Position involves primarily desk work with a computer.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
5. Effectively communicate in Business English language.
6. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.


LARGE GAPS IN WORK HISTORY WILL DISQUALIFY
 
Job Number: N/A
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Relocation
Overtime: N/A
Duration: Permanent
Start Date: Asap
Input Date: 09/21/2021
Last Updated: 05/01/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Designer #10387

Description:
Sr. Mechanical Designer Description:
Our client located in the greater Boston, MA area, needs a Sr. Mechanical Designer to provide design and drafting support to development, detailed design, build and test of innovative sensor products that operate in extreme environments. The successful candidate will have a proven track record in generating creative concepts, supporting iterative trade studies, and meeting program budget and schedule objectives.
*This position is a 6-9 + months contractor opportunity*
Sr. Mechanical Designer Responsibilities:
• Create innovative and practical opto-mechanical and electro-mechanical designs and documentation packages.
• Work closely with members of the program team to achieve hardware design, build and test objectives.
• Track, understand and flow down design and schedule requirements and apply sound design principles and oversight to meet project requirements.
• Develop clean documentation packages and design records which includes maintaining revision control.
Sr. Mechanical Designer required Experience:
• Bachelor’s degree in mechanical engineering preferred, not required
• 8+ years designing electronics packaging with Solidworks, PDM, and GD&T
• Design experience packaging and documenting products containing optical elements, electronics and structures for space and airborne environments.
• High proficiency in SolidWorks 3D CAD, data management tools and techniques, and revision control practices.
• Ability to assess and apply geometric tolerances in complex and precision hardware assemblies.
• Ability to research data that is required to develop designs using historical precedents, manufacturer's catalogues, and technical guides. Successfully combines findings with preliminary information to contribute to developing final designs.
• Good communication and organizational skills. Sound interpersonal skills that enable interfacing, coordinating, and negotiating with company personnel, customers and suppliers.
• High creativity and ability to achieve lean, efficient, low cost, easy to assemble design solutions.
• Experience in hardware design for severe shock, vibration and thermal environments preferred, not required.

Call Kathy Beattie/Technical Recruiter (804) 545-7154
or email kathy.beattie@trimech.com
 
Job Number: 10387
Job Location: Acton, MA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6-9 mos.+
Start Date: ASAP
Input Date: 10/22/2021
Last Updated: 11/04/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Optical Engineer

Description:
A Senior Optical Engineer role located in Redmond, WA is currently available through Belcan. The Senior Optical Engineer will work directly with Optical and Systems engineers as well as with the Electrical and Mechanical Engineering teams. You will be responsible for optical modelling, optical testing, and system analysis for automotive lidar products.

Senior Optical Engineer job duties:

* Develop and analyze micro-optical models in Zemax for product development and concept
studies
* Develop and validate optical performance models in Matlab and Simulink
* Design and develop optics for lidar products from conceptual design through manufacturing
release (beam shaping, wavelength or polarization combining, distortion correction)
* Design and execute testing of optical components, diode lasers, optical sub-systems and
complete products. Report results to engineering team and management

EDUCATION AND EXPERIENCE REQUIRED

* BS in Optical Engineering or related field
* 7+ years of product focused optical engineering
* 5+ years of Zemax designing experience
* Proven Experience with optical scanning systems
* Experience supporting optical products from the concept stage through final release
* Demonstrated experience using Zemax, Code V, or related design system for geometric optics
(sequential and nonsequential) physical optics, optimization, tolerancing and sensitivity analysis
* Experience with equipment methods for aligning complex optical systems
* Experience designing lenses, free form optics and beam shaping optics for laser systems
* Experience with equip and instrumentation to measure optical power, beam characteristics,
polarization, bean alignment, etc.
* Hands on experience with laser diodes, lenses, prisms, and other optical components to build
and test prototypes and components
* Knowledge of Python and Matlab
* Experience with basic statistics, writing and executing detailed test plans, and preparing
technical reports
* Solid communication and problems solving skills, ability to understand complex systems and
ability to work in a fast-paced environment
* Excellent verbal and written communications skills in English

If you are interested in this Senior Optical Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315569
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solderer

Description:
A Senior Solderer job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred Due to the nature of the work performed in this facility, US citizenship is required.

Senior Solderer Job duties:

* Perform fabrication or inspection functions in a research, production or pre-production environment by building or integrating hardware for prototypes, assemblies and large complex systems, soldering ribbons/strip line skills for RF performance
* Previous J-STD-001 space addendum or NASA 8739 certification is preferred

Qualifications:

* A High School diploma or equivalent plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred
* Ability to solder complex assemblies, small jumper wires.
* Ability to read a drawing, and wire list
* Ability to perform more advanced fabrication and marking
* Distinct communication and computer skills
* Solid knowledge of Statistics and SPC applications

If you are interested in this Senior Solderer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313660
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Equipment Design Engineer

Description:
Inconen is looking for a Senior Test Equipment Design Engineer for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** This is a Temp-to-Hire role. If performance expectations are met the candidate would convert in 4 to 6 months **

Duties:
-Seeking a Senior Test Equipment Design Engineer whose area of expertise is electronics and automated test system design.
-Our automated test systems include those designed for testing power and digital electronics for space and defense applications; Units requiring automated test range from single-board computers, data acquisition boards, valve actuators to combustion and electric propulsion rocket engine controllers used in space-based applications.
-Automated test systems perform acceptance testing at the PWA (board) and unit (box) level.
-In this role, you will initially support a defense program. In addition, you will perform an array of technical and project engineering related duties in support of a variety of Avionics STE design projects.
-The person in this position will be responsible for hands-on test and test system design, as well as providing project management and leadership for less senior personnel.

Working under limited general direction, responsibilities include, but are not limited to:
-70% - Hands-on design and design leadership of automated test system development projects (includes hardware, software and mechanical design). Included is the development of test system requirements and verification methodologies, resolution of anomalies occurring during integration and test of a test system, as well as during subsequent delivery and test system usage.
-15% - Leading design teams of 2 or more people on automated test system development activities with cost and schedule accountability.
-5% - Supporting test system proposals and bids.
-10% - Travel to other Aerojet Rocketdyne, customer and supplier sites for design reviews and technical interface meetings.

Skills:
-Experience with scripting language such as C, C++ and/or proficient in the use of the National Instruments (NI) development suite (LabWindows/CVI, LabVIEW and TestStand).
-Hands-on experience with Test Instrumentation such as Oscilloscopes, Multiplexers, Logic Analyzers, Data Acquisition systems, etc.

Proficiency in the:
-Design of test consoles, test adapters, and/or test cables;
-Integration of test hardware and test software;
-Development of test equipment drawings;
-Development of test system requirements and verification methodologies;
-Development of test procedures;
-Troubleshooting of equipment, circuit boards, cables, etc;
-Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage.
-Experience in prioritizing and completing several parallel efforts.
-Demonstrated ability to work independently and drive toward goals.
-Self-motivated - willing to engage customers, partners, and suppliers to achieve results.
-Possess process discipline, order, and attention to detail.
-Must have excellent oral and written communication skills and be able to coordinate and collaborate with local/on-site teams, as well as teams at other sites.

Education:
-Bachelor of Science degree in Electrical Engineering, Computer Science or related discipline and five (5) or more years of experience (or an equivalent combination of education and experience).
 
Job Number: 16739
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service Engineer

Description:
A Service Engineer job is available with a client in San Jose, CA. The individual will be responsible for working with the customer at their installation site to make certain that the equipment is installed and continues to operate properly.

Responsibilities:
* Installation of our high-tech automated systems, maintenance, service visits and repairs at our customer sites
* Technical consulting on our systems to ensure maximum operational capability and 110% customer satisfaction and promote our customer care contracts
* Co-operate closely with our automation chemists and business managers to provide technical Support
* Actively communicate customer needs and requirements to our service & support management and to the R&D department
* Support production department and perform final tests of tools and equipment
* Training of distributors and new or third-party service engineers
* Perform repairs of customer tools or modules in our repair center

Requirements:
* Solid education in electrical & mechanical engineering
* 3 Years of experience in repair and maintenance of instrumentation used in chemical laboratories (e.g. parallel synthesizers, liquid handlers, auto samplers, HPLC…)
* Enjoy direct contact with customers and frequent travel (national approx. 40-50%)
* Definite customer orientation and confidence to work independently
* General understanding of typical workflows in chemistry laboratories is a huge plus
* Solid communication skills in English, knowledge of any further language is a plus
* Solid user experience with Microsoft office products Excel and Word

THIS IS A DIRECT POSITION

If you are interested in this Service Engineer job in San Jose, CA, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan Engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314160
Job Location: San Jose, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/10/2021
Last Updated: 02/21/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation Engineer

Description:
Inconen is looking for a Simulation Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Schedule: Second Shift

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
-Experience with interacting/updating/troubleshooting real time HIL simulation platforms (e.g., ADI, NI, Speedgoat)
-Aircraft system simulation experience
-Ability to read aircraft/simulation electrical drawings
-Preferred experience integrating various hardware I/O (analog, discrete, data bus, etc.) into a real time simulation platform
-Preferred experience with integration of aircraft system simulation models to corresponding real aircraft controller hardware (LRUs)
-Understanding of standard aircraft industry, I/O protocols (i.e., ARINC 429, 664, 485, 717, etc.)
-Preferred experience with rectifying lab problem reports by troubleshooting, developing solutions and implementation of any issue identified with the simulation platform, simulation models, LRU electrical connections, or auxiliary test equipment
-Preferred proficiency with the utilization of Simulink or High-level language (Fortran, C++, etc.) in a real time simulation environment
-Preferred experience with Python for the purposes of creating scripts for automation of tests or conducted on a real time simulation platform
-Ability to interact with diverse perspectives in order to satisfy lab customer requirements, questions and/or test assistance
-Position is 80% lab work and 20% desk work.


Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16854
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/16/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Job client: Lockheed Martin
Job details: Software Engineer
Job location: Fort Worth, TX
Job duration: 12 months contract

Job clearance: Must have Active Secret with completion of background investigation within last 6 years

Job description:
Lockheed Martin is looking for a real-time Simulation Software Engineer to join the F-35 Shared Simulation Software team. You will be part of the highly innovative Simulation & System Test (SST) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within SST resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.

• Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
• Experience with C++ programming language
• Experience with Linux operating systems
• Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
• Bachelor’s degree in an Engineering/Technical Field
• Experience with software in a highly integration-intensive environment
• Experience with Aircraft Avionics Sensors – Electronic Warfare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperture System (DAS), Electro-Optical Targeting System (EOTS)
• Experience with Agile software development methodologies and tools, such as VersionOne and JIRA
• Experience with software automation and DevSecOps tools, such as Ansible and Jenkins.

Comments:
C++ and LINUX experience required (and shown in previous work history, not just summary)
Object Oriented Design (OOD) experience required

Qualified candidates will have a strong software background to work with simulation tools
Simulation /training software experience a plus

ACTIVE secret clearance with a background investigation within the last 6 years IS REQUIRED

Must be onsite in Fort Worth, TX 100% of the time

Start date listed as September to give time to find qualified candidates. if a candidate is identified earlier, the start date will be earlier.
 
Job Number: CJH - 5858-1
Job Location: Fort Worth, TX
Rate: $90/hr
Per Diem: Split
Duration: 12 Months
Start Date: Asap
Input Date: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III

Description:
A Software Engineer III job in Englewood, CO is currently available through Belcan with one of our Aerospace/Space/Defense clients. You will work in an agile, collective environment. You will be using your skills and expertise to define, design, develop, test, certify and improve cutting-edge software products. To be considered for this role, you will need a Bachelor's of Science degree in Computer Science, Software Engineering or other related discipline and typically 6 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance is required. NO SPONSORSHIP AVAILABLE

Software Engineer III Job duties:

* Define, design, develop, test, certify and improve cutting-edge software products. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
* Perform coding, debugging, testing, and troubleshooting of systems and software throughout the development process.
* Technical duties involve the design and development of new software products throughout the product lifecycle.
* Understanding of industry standard software languages such as C, C#, C++, HTML, Java, Python, and Bash
* Experience with software tools for requirements tracking, code reviews, static analysis, library and artifact repository, and automated build
* Knowledge of software development methodologies such as Agile/Scrum, Waterfall, and Spiral
* Experienced with data structures

Qualifications:

* Bachelors of Science degree in Computer Science, Software Engineering or other related
discipline and typically 6 or more years of relevant experience
* Understanding of Computer Aided Engineering tools
* Practical knowledge of engineering principles and practices
* Experience working in multi-disciplinary teams
* The ability to obtain and maintain a Secret U.S. Security Clearance is required.
* NO SPONSORSHIP AVAILABLE

Pay Range: Up to $61.00/hr. DOE

If you are interested in this Software Engineer III job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 315934
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 10/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software-In-The-Loop Simulation Engineer - WA State / Contract or Direct hire

Description:
Description:

As part of a hardworking team of diverse engineers, you will develop aerospace multidisciplinary models and simulations using platforms ranging from desktop computers, software-in-the-loop simulation, hardware-in-the-loop labs, to on-vehicle simulation.

You will share in the team's impact on all aspects of many programs through their entire lifecycle, from early conceptual design and configuration through flight operations and sustaining engineering.

We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight.

Mandatory:
•Minimum of BS degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Physics, Applied Mathematics, or Computer Science
•5+ years of demonstrated experience in development of air or space vehicle and/or physical systems modeling and simulation •Strong fundamentals in rigid body dynamics, fluid mechanics, and 1st principles physics-based mathematical models
•Familiar with MATLAB and Simulink for building low-level simulations
•Experienced with Model Based Development paradigms and system/parameter identification techniques
•Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
•Must be a U.S. citizen or national, U.S. permanent resident
 
Job Number: WA0089
Job Location: WA State
Input Date: 09/10/2021
Last Updated: 10/31/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Engineer, Analysis/Systems Engineering

Description:
Inconen is looking for a Specialist Engineer, Analysis/Systems Engineering for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **
** This is a Hardware Systems role, NOT Software or Electrical systems **

Duties:
-60% - Develops hardware and software requirements for rocket propulsion systems. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
-May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant rocket propulsion project assignments, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements.
-May require knowledge of SysML, Camoe, Rhapsody, Jazz Team Server, Rationale Publishing Engine, and/or Quality Manager.
-Requires knowledge of DOORS.
-Must have the ability to assesses the feasibility and soundness of proposed verification methods of requirements.
-Requires excellent understanding of risk management principles
-Requires ability to lead efforts related to design reviews
-Represents the organization in meetings to resolve important questions and to plan and coordinate work.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at periodic intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Education:
-Bachelor’s degree
 
Job Number: 16711
Job Location: Huntsville, AL
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 01/27/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced ASIC/FPGA Engineer

Description:
A Sr. Advanced ASIC/FPGA Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for the definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced ASIC/FPGA Engineer Job duties:

* Utilizing your exceptional communication skills to lead small teams to successful project completion.
* Responsible for the definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments.
* Determine the architecture, system simulation and detailed design approach.
* Evaluate process flow.
* Create test simulation plans and verify test results.

Qualifications:

* Significant understanding and experience with the utilization of ASIC/FPGA engineering concepts, principles, and theories.
* Ability to provide resolution to a diverse range of complex problems which require the use of ingenuity and creativity.
* Strong awareness of organization and customer business objectives and engineering's role in achieving them.
* Experience effectively leading teams, through proven leadership skills.

If you are interested in this Sr. Advanced ASIC/FPGA Engineer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315125
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 02/01/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer – Capital Logic

Description:
A Sr. Electrical Engineer - Capital Logic job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering or other related discipline and 10 or more years of relevant experience.

Sr. Electrical Engineer - Capital Logic Job duties:

* Demonstrated knowledge of engineering principles and practices.
* Experience with Computer Aided Engineering tools.
* Build and test prototype devices.
* Must demonstrate the ability to consume / import Siemens Mentor Graphics Capital data / intelligence into Siemens NX11 for the purposes of routing bundles.
* Must demonstrate the ability to route bundles in NX11 and implement cable management hardware and devices.

Qualifications:

* Must demonstrate the ability to export CAD derived cable lengths back into Mentor Graphics Capital Logic.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
* Experience in digital or analog circuit design and schematic capture.
* Working knowledge of ASME and Government standards.

Pay Range: Up to $70/hr DOE

If you are interested in this Sr. Electrical Engineer - Capital Logic position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314872
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/31/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Facility Maintenance Technician

Description:
Belcan has a job with a service client for a Senior PLC/Maintenance Technician located in Riverside, CA This person will function as one of the Sr.Lead Technician's at the customer site for a long term maintenance contract.
Key responsibilities;
* Preventive and predictive maintenance, scheduled maintenance, corrective maintenance, scheduled repairs, emergency repairs, and performs complex maintenance on tools, test equipment, etc.
* Log all service work performed, downtime during repair, and account for equipment service requests of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Guides on-site technical and operational support in the design, development, installation and maintenance of equipment and systems of a very complex nature. Guides very complex site surveys to develop base or installation design plans. Guides training customers to maintain and adjust very complex equipment. Develops and submits reports covering all job activity. Guides the maintenance of very complex tools, test equipment, calibration items, etc. May develop the planning and estimating of labor categories, rates, material dollar costs, transportation expenses and per diem rates to complete very complex proposals. Guides the review of very complex task plans, drawings, and installation schematics and provides continual guidance throughout task duration.
* Mentors junior techs. Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements and service training to customers.

Qualifications;
* Associate degree required, BS/BA in related discipline preferred. Specialized skill training/certification may be required.
* Skills including a balance of Electronics, Electrical and Mechanical skills with an emphasis on Controls.
* Strong electrical mechanical background and ability to troubleshoot problems. Need to be able to perform maintenance functions and make repairs in a professional and workman like manner. Need to learn system operations in quick fashion. Needs to be willing to follow procedures and read prints, schematics. Must have an excellent safety record. Must have AB PLC and RS Logix experience. Must have Rockwell software experience. Must be able to utilize CMMS.
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Five years maintenance experience with some conveyor equipment and material handling experience is preferred.
* Demonstrates and applies comprehensive knowledge of field of specialization to the successful completion of complex assignments. Demonstrates advanced knowledge of concepts, practices, and procedures of particular area of specialization. Demonstrates significant knowledge of organizations business practices and issues faced and contributes to problem resolution of those issues. Generally, 5 years of successful experience in area

THERE IS A FIRST SHIFT & 3RD SHIFT POSITION
Hours that we will work when we are 24/7
1st 5:30am - 2:00pm
3rd 9:30pm - 6:00am

THIS IS A CONTRACT TO HIRE POSITION. AVERAGE PAY IS $30.00/HR. SALARY BASED ON EDUCATION, JOB KNOWLEDGE, AND EXPERIENCE. ROTATIONAL WEEKENDS.

If you are interested in this Senior Maintenance Technician job in Riverside, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


 
Job Number: 312596
Job Location: Riverside, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintenance Technician

Description:
A Maintenance Technician job with a service client is located in Denton, TX. This position will function as a Senior Technician on 1st shift working a 12 hour shift.

Responsibilities:
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Strong conveyor systems experience
* Provide electromechanical corrective repairs and preventative maintenance.
* Log all service work performed, downtime during repair, and account for equipment service requests.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Performs complex product and service training to customers.
* Performs complex maintenance on tools, test equipment, etc. Completes documents of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs. Mentors junior techs.
* Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements.
* May participate in the negotiation and administration of service contracts.

Requirements:
* HS diploma or equivalent required. Specialized skill training/certification may be required.
* Five years maintenance experience with electromechanical equipment experience is preferred
* Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Practice safe work habits and abide by the safety rules in accordance with the safety policies set forth by our client.
* Work in cooperation as a team with the 3PL warehouse operators.
* Walk long distances and stand for long periods of time.

THIS IS A 6 MONTH CONTRACT TO HIRE POSITION

If you are interested in this Maintenance Technician job in Denton, TX, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan Engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314392
Job Location: Atlanta, GA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/17/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintenance Technician

Description:
Belcan has a job for a Senior Maintenance Technician located in Ontario, CA. The Maintenance Technician level is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. Acts as a senior material handling technician on all equipment that is installed at a specific site location. Helps and mentors lower-level employees.

Key Responsibilities:

- Electromechanical skills, including motors, Troubleshooting skills with PLC controls, servos, gearboxes, and other discrete electrical control components.
- Practice safe work habits and abide by the safety rules in accordance with the safety policies set forth by the client.
- Provide electromechanical corrective repairs and preventative maintenance.
- Log all service work performed, downtime during repair, and account for equipment service requests.
- Participates in complex maintenance tasks, equipment trial runs, investigative tests, troubleshoot equipment failures, repairs and overhauls.
- Participates in training customers on complex products, operations and services.
- Performs semi-complex maintenance on tools, test equipment, etc.
- Maintains documents of all inspections, maintenance and repair work, and failures.
- Participates in the assessment of complex product/equipment performance based on field support data and recommends modifications or improvements.
- Responds to and corrects semi-complex equipment faults.

Qualifications:

* HS diploma or equivalent required. Associate degree or vocational technical training preferred. Specialized skill training/certification preferred.
* 5+ years of Electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics, and control panels.
* Two years of Automated Guided Vehicles (AGV) maintenance preferred with emphasis on electronics and computer skills
* Servo drives, PLC, PC controllers, dc power supplies, optical devices
* Knowledge of automated equipment; preferably automated material handling systems. Some experience with Allen-Bradley RSLogix5000 PLC controls platforms.
* Some experience with DeviceNet, PROFIBUS, Ethernet, or equivalent network communications is a plus.
* MS Office products



If you are interested in this Maintenance Technician position in Ontario, CA please apply via the 'apply now' link provided.


Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315843
Job Location: Ontario, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 09/03/2021
Last Updated: 11/23/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. RF Engineer

Description:
Inconen is looking for a Sr. RF Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Relocation package if the candidate is more than 50 miles from our location**

Duties:
1. Our client, a well-known Aerospace Company, produces complex single, two, and three stage launch vehicles used to support ballistic missile defense testing.
2. This opening is for a RF Engineer who will be supporting multiple projects that include requirements definition, trade studies, component selection, design, analysis, and testing related to the technologies listed above.
3. The successful candidate will be well rounded in electrical and RF engineering, self-motivated, detail oriented and able to work both independently and within a team environment.

Essential Job Functions:
25 % - Uses fundamentals in electrical engineering both analog & digital electronics.
25 % - Applies RF principles and design technology in development of RF microwave assemblies and systems as it applies to telemetry.
10 % - Use of communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
10 % - Designs & supports MIL-STD-461 testing.
10 % - Uses link analysis, inter-modular analysis and antenna pattern analysis.
10 % - Designs, develops, integrates and tests military electronic systems with design for manufacturing & environmental constraints such as (EMI, EMC, vibration, packaging thermal ect.)
10 % - Documents efforts, writes test procedures, reports to completion of milestones with specific procedures.

Skills:
1. Ability to use and apply RF principles and design techniques, with experience in development of RF/microwave assemblies and systems as it applies to telemetry.
2. Experience with communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
3. Experience with link analysis, inter-modulation analysis, and antenna pattern analysis.
4. Experience with design, development, integration, and test of military electronic systems with design for manufacturing and environmental constraints (EMI/EMC, vibration, packaging, thermal, etc.).
5. Experience with MIL-STD-461E
6. Strong Understanding of electrical engineering fundamentals in both analog and digital electronics.
7. This is a hands-on position for individuals with demonstrated analytical and troubleshooting skills.
8. Ability to document efforts, write test procedures and reports and contribute to completion of milestones within specific projects.
9. Excellent written and verbal communication skills.
10. Experience with Microsoft Word, Excel, and PowerPoint.
11. May be required to obtain and maintain a U.S. Security Clearance at the appropriate level.
12. Must be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

Education:
1. Bachelor's Degree in Engineering and at least 5 years of related experience or an equivalent combination of education and experience required.
 
Job Number: 12865
Job Location: Orlando, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 10/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4

Description:
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.

Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA


Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies




The Structures Company LLC is an AA/EOE.
 
Job Number: 525
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 07/22/2022
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/23/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Overtime: Possible
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 02/07/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Mechanic

Description:
Read and interpret F-22 engineering drawings, electrical systems schematics, technical manuals, structure repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders. Work with precision measuring instruments, micrometers, calipers, tape measures, and standard scales. Utilizes tools to include but not limited to drills, sanders, angle motors, shears, drill press, special tools, and pneumatic riveter. Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals.

Skill Sets Needed
F-22 - 6+ years
F-35 - 6+ years
FAA A&P (Airframe & Powerplant) License - 6+years
Low Observable Coatings - 6+years
Military Training Records - 6+ years
 
Job Number: CJH-6257-1
Job Location: Langley AFB, VA
Rate: 32.64
Per Diem: Yes
Overtime: Possibile
Duration: 12 Months
Start Date: Asap
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer

Description:
Primary job responsibility is to support Receiving Inspection and Production Operations with engineering guidance related to inspection, product compliance, specification interpretation and defect disposition. This is accomplished by providing hands on support on products encompassing a wide range of electro-mechanical and electrical disciplines.

Additional SQE activities include review of program contractual and drawing requirements and flow down of requirements on purchase orders and providing support to Procurement for supplier quality activities on commodity and/or subcontract procurements. Also responsible for basic quality services including: supplier evaluation, verification of special processes, part acceptance planning, defect analysis, timely root cause and corrective action implementation for affected products. Implements preventive actions to reduce defects, analyzes effectiveness of supplier root cause and corrective actions to eliminate repeat escapes. Makes recommendations on potential supplier usage based on cost, inspection of facilities, risk assessments, and historical performance. Successful candidates will also need to provide reporting on hardware and supply chain quality metrics utilized to manage SQA and supplier performance. Some travel may also be required.

Basic Qualifications
• Bachelors’ degree or equivalent from an accredited college in Engineering or related technical discipline
• Demonstrated ability to make decisions, set priorities and provide direction in a dynamic business environment
• Experience developing and maintaining positive working relationships with suppliers, internal and external customers
• Ability to read and interpret drawings and industry specifications
• Working knowledge of problem solving/root cause analysis (RCCA) and process management
• Experience multi-tasking while working challenging projects from start to finish
• Good communication skills, both oral and written
• Proficiency in Microsoft Office (Outlook, Word, PowerPoint, and Excel)

Desired skills
• Knowledge of Supplier Quality and/or Quality Engineering
• Manufacturing processes, materials, and/or component engineering experience
• Experience with AS9100, ISO9001:2000, and first article inspections
• Casual Analysis experience
• Understanding of Geometric Dimensioning and Tolerancing (GD&T)
Ability to learn new systems (procurement, manufacturing execution, etc.) quickly.
 
Job Number: 0580
Job Location: Clearwater, FL
Rate: $25.00-$39.00/hr
Duration: 12 Months
Input Date: 09/08/2021
Firm Name: INC EMPIRE LLC
Attention: Cynthia Lashley
Address: 111 W FRANKLIN ST
City, State: DELPHI, IN 46923
Phone: 765/426-1702
Website: www.incempirellc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer - Aircraft Surveillance Development and Verification

Description:
ABOUT THE JOB:
This position is responsible for system development and verification activities for aircraft surveillance systems in accordance with ARP4754A systems development cycle and DO-178B software development cycle.

Surveillance systems include Traffic Alert & Collision Avoidance Systems (TCAS), Terrain Awareness Warning Systems (TAWS) and Mode S Transponders with Automatic Dependent Surveillance-Broadcast (ADS-B) Out.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Knowledge of ARP4754A systems development cycle
• Familiarity with DO-178B software development cycle
• Experience with requirements development, capture and management
• Experience developing system level verification tests for a VALFAC (validation facility) environment including:
o Authoring new test scripts
o Updating test scripts
o Running tests
• Experience with DOORS for test case capture and management and for requirements capture and management
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• TCAS product experience
• TAWS product experience
• ADS-B Out product experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 09/27/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer - IMA Platform

Description:
ABOUT THE JOB:
This position is responsible for development and test of an integrated modular avionics (IMA) platform.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* 7+ years aerospace system engineering experience
* System design experience using ARP4754A guidelines
* Experience with Integrated Modular Avionics (IMA)
* Experience with system verification testing
* Experience updating system requirement from problem reports
* Experience with coverage analysis of system requirements to hardware, software and test requirements
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

HIGHLY PREFERRED SKILLS:
* Experience with ARINC 664, Part 7 - Avionics Full-Duplex Switched Ethernet (AFDX)
* Experience with system certification to Design Assurance Level (DAL) A or DAL B.

PREFERRED SKILLS:
* Experience with DO-178
* Experience with DO-254
* Experience with IMA General Processing Modules (GPM)
* Experience with ARINC 429 and CAN 825 I/O

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315443
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315598
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. However, this position can be worked remotely from anywhere in the U.S. This is a full time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.

Experience in avionics related hardware in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required
 
Job Number: 315440
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: KeturahCarhee
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Indianapolis, IN is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315599
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / software experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in avionics related software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into high level requirements (HLR) / low level software requirements (LLR)
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Apply strong interpersonal skills to communicate with clarity and be responsive to the team and its stakeholders
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems engineering or similar relevant experience in avionics system / software platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315446
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 02/08/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Indianapolis, IN is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315600
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Rockford, IL is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315601
Job Location: Rockford, IL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.

This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
Job duties:

Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
· System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
· Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
· Develop and deliver the design, specifications, and integration requirements to the systems teams
· Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
· Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
· Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
· Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
· Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
· 12+ years systems or electrical engineering or similar relevant experience in electrical power systems
· Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
· Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
· Atlassian tools experience (JIRA, Confluence, Git)
· DOORs / DOORS NextGen tools experience
· Matlab / Simulink experience is desired
· Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc?)
· Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
· Legal authorization to work in the U.S. is required


 
Job Number: 315449
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Platteville, WI is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315602
Job Location: Platteville, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. However, this position can be worked remotely from anywhere in the U.S. This is a full time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.

Experience in avionics related hardware in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required
 
Job Number: 315593
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Phoenix, AZ is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / software experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in avionics related software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into high level requirements (HLR) / low level software requirements (LLR)
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Apply strong interpersonal skills to communicate with clarity and be responsive to the team and its stakeholders
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems engineering or similar relevant experience in avionics system / software platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315594
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer position in Dallas, TX is currently available through Belcan. In this position, you will have the opportunity to work directly with customers and multi-disciplinary teams on complex projects in a vibrant and dynamic team-oriented environment. To be considered for this position you must be a creative thinker with excellent communications and interpersonal skills, a passion for excellence, and strong engineering fundamentals.

Systems Engineer job duties:
* Lead projects through development lifecycle; demonstrate ownership and end-to-end accountability to implement and complete projects in a cost-effective and timely manner.
* Lead cross-functional technical teams including project planning.
* Plan and track the project via project schedules to ensure requirements and project deadlines are met.
* Resolve engineering design and test problems.
* Communicate requirements, schedules and deliverable information to internal and external customers and suppliers.
* Generate technical specifications including data sheets, requirements specifications and product specifications.
* Support Marketing by providing technical information required for data sheets and other marketing literature; providing feasibility studies for candidate new products and technology needed to serve targeted markets.
* Support sales by providing proposals and technical information related to new business opportunity activities.
* Assist with recruiting team members.

Skills & Experience
* Bachelors degree in Electrical Engineering
* 3+ years of relevant experience
* Strong understanding of analog/mixed-signal IC's and their applications
* Strong PC Board design experience
* FPGA code or platform development; Testing FPGA's and DSP's
* Solid team player with strong interpersonal skills, clear verbal and written communication skills and a high degree of accountability and drive for success
* Familiarity with lab equipment such as oscilloscopes, spectrum generators, power supplies, and thermal stream.

If you are interested in this Systems Engineer job in Dallas, TX please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 316003
Job Location: Dallas, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/08/2021
Last Updated: 09/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer // Multiple locations in CA, GA, OK

Description:
Systems Engineer 3

Location: Warner Robins, GA
Duration: 12 months

Description:
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

Client Global Services C-17 Globemaster III is seeking a Systems Engineer 3: C-17 Reliability & Maintainability for exciting opportunities with the Fleet Reliability & Analysis Team in Warner Robins, Georgia This candidate will perform Reliability & Maintainability (R&M) tasks such as Predictions, Failure Mode & Effect Analyses, Failure Review, Corrective Action, Maintainability Analysis, and Engineering Investigations.

Position Responsibilities:
- Works with Engineering to perform Reliability-Centered Maintenance (RCM) / Maintenance Steering Group (MSG-3) analysis of existing and modified systems
- Performs various analyses to optimize total system of systems and/or system architecture.
- Perform failure analysis that includes root cause corrective action recommendations
- Performs reliability processes including collecting data, developing metrics, and conducting trend analysis
- Execute various analyses to evaluate specification compliance and optimize total system of systems and/or system architecture
- Conduct failure analyses to recommend operational, maintenance, and process changes so as to maximize aircraft systems reliability, availability and life expectancy

Basic Qualifications (Required Skills/Experience):
- Bachelors, Master's or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
- 5+ years of experience with reliability analyses including mission reliability parameters, mean time between failure, schedule reliability.
- Ability to read electrical and mechanical engineering drawings including schematics, wiring diagrams and install drawings
- Proficient with MS Excel, MS Access, MySQL/ PL SQL / a Technology company
- Strong verbal and presentation skills
- Must be self-motivated and capable of working with minimal supervision

Preferred Qualifications (Desired Skills/Experience):
- Knowledge of R&M standards such as NAVAIR 00-25-403, DOD Manual 4151.22-M
- Experience with Excel and Tableau is a plus
- Experience with Python / Java is a plus

Top 3 Requirements:
- Knowledge of Air Forces G081 system
- Experience with Aircraft Maintenance
- Experience with aircraft reliability and maintainability

Typical Education & Experience:
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).

Skillset Keywords:
Required:
Root Cause Analysis, Aircraft Systems, Maintenance Engineering, System Engineering, Reliability Engineering, Reliability Analyses, System Health, Analysis and Corrective action, Failure Modes Effects and Critic
Maintainability Analyses

Nice to Have:
C-17 Globemaster III Program, Field Data Analysis, Failure Analysis, Data Visualizations, Data Analytics, Mechanical/Structural Engineering Principals, Spacecraft, Flight Systems, Statistical Concepts, Tech Data Library and Database, Safety Awareness, Quality, Systems Thinking, Analytical Skills (Technical)

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Engineering degree is required

Skill Code: 62U-Reliab, Maintain & Sys Health
 
Job Location: Warner Robins, GA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job working REMOTELY from anywhere in the U.S. is currently available at Belcan. We are looking for well-rounded and dynamic Systems Engineers!  To be considered for this role, you will need a Bachelor of Science degree in the STEM field, and a minimum of five years of system and software engineering experience within the aerospace and defense (or similar highly regulated) industry. You will be working with avionics related systems in one or more of the following platforms: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
 
Systems Engineer Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
· System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirement
· Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
· Work across functional teams to investigate and solve problems, including trade studies and optimization activities
· Develop automated simulation and test emulation solutions
· Support System integration testing and functional testing planning, procedures and testing activities
· Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML).  Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
· Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
· Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
· Five to 20+ years systems engineering or similar relevant experience
· Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
· DOORs / DOORS NextGen tools experience
· Matlab / Simulink or other technical computing tools experience is desired
· Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
· Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
· Legal authorization to work in the U.S./US Citizenship is required
· Must be willing to travel to Windsor, CT as needed for project kick offs or quarterly meetings.
 
If you are interested in this Systems Engineer job at Belcan, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer.  EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
www.BELCAN.com


 
Job Number: 315439
Job Location: REMOTE, RE
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 04/25/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Bellevue, WA is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315589
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in West Palm Beach, FL is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315591
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Phoenix, AZ is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315592
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Cincinnati, OH is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315590
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer II

Description:
A Systems Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new system safety or reliability products and processes through the product lifecycle. To be considered for this role, you will have a Bachelors degree in System Engineering or a related field, and three plus years of experience of relevant experience.

Systems Engineer Job duties:
* Developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* In charge of system-level ownership of new system safety.
* Develop Failure Modes and Effects Analysis as well as Reliability Analysis products.
* System Safety Engineering analysis and products including but not limited to fault tree analysis, hazard analysis, computer-based control system (CBCS) analysis, must work and must not work function analysis, etc.
* Software/ Hardware integration, including avionics and electrical distribution systems.

Qualifications:

* Bachelors of Science Degree in System Engineering or related discipline.
* Three plus years of relevant experience.
* System level design/analysis experience.
* Practical knowledge of engineering principles and practices.
* Knowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.
* Experience with fault tree analysis tools such as CAFTA or SAPHIRE.
* Experience with requirements management and system modeling tools, such as DOORS, Rhapsody, NoMagic MATLAB.
* Understanding of Guidance Navigation, and Control hardware and software for space applications.
* Background in Aerospace and Defense Industry.
* Ability to administer baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures.
* Exposure to establishing and tracking key Technical Performance Measurements (TPM).

Pay Rate: Up to $50/hr DOE

If you are interested in this Systems Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 314574
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/23/2021
Last Updated: 04/07/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Our client mandates that all employees and contractors must be fully vaccinated for COVID-19 **
** This is a Hardware Systems role, NOT Software or Electrical systems **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 16821
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV (Secret Clearance)

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** This is a Hardware Systems role, NOT Software or Electrical systems **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 16642
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Engineer

Description:
The Systems Integration Engineer supports the design, analysis, and development, of advanced integration facilities, and application in the testing, development and certification of highly integrated complex systems.

• Design, build, and daily support and maintenance operation of advanced hardware-in-the­loop (HIL) integration test facilities, for the development of integrated complex aircraft systems.
• Development, modification and validation of aircraft simulation models.
• Supports Systems integration, safety of flight (SOF) testing, and verification testing and automation of these tests as required.
• Provide testing support along with automation and customization for facility users as needed.
• Resolves problems from development and testing activities.
• Maintains and upgrades the facility to match the testing needs and troubleshoots and resolves issues.
• Communicates with the systems design teams & systems suppliers on technical issues as required.

Unique Skills:
• Strong computer, analytical and problem-solving skills.
• Working knowledge with MATLAB/Simulink®, good Python/C coding skills, familiarity with digital/analog electrical systems.
• Experience with dSpace Control/AutomationDesk or other test automation environment desired.
• Familiarity with basic lab testing equipment such as multi-meters and oscilloscopes.
• Experience with data busses including RS-232, RS-485, ARINC-429, and Ethernet desired.
• Working knowledge of Microsoft Office Suite (Word, Excel, Lotus Notes, etc.).
• Familiarity with SW version control and problem tracking tools (PVCS/GIT/JIRA) is desired.
• Ability to communicate effectively throughout all levels of an organization.
• Ability to work independently and within a team oriented environment.

Education:
• Bachelors' degree in Electrical, Aerospace, Physics, Software engineering or other related field required at a minimum.
• Previous experience including internships and co-ops in the area of automated testing, embedded systems, including coding, requirements-based test development, design, and integration.

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs., throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 501bs or more during the work shift, with the use of Company provided 'reach assistance technology' or 'movement assist technology' (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-026
Job Location: Greensboro, NC
Rate: $38-$51.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ Years
Start Date: ASAP
Input Date: 09/01/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Indianapolis, IN is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315596
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Phoenix, AZ is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315597
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Bellevue, WA is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315448
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 08/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer - Launch Vehicle / WA State

Description:
Job Description :
As part of a small team, you will develop and manage system safety products for the first stage Launch Vehicle. You will support system engineering practices across disciplines to develop, allocate, manage, and verify requirements and interfaces. You will work across subsystems and support integrated solutions to achieve our vision of 'millions of people living and working in space.
Responsibilities:
Support launch vehicle project leads by carrying out systems engineering activities in accordance with companies standards and practices, engaging in tailoring required processes to complete tasks assigned including:
Perform system safety analysis and generate system safety deliverables including: Functional Hazard Assessments (FHAs), Fault Tree Analyses (FTAs), Failure Mode, Effects, and Criticality Analyses (FMECAs), Common Cause Assessments (CCAs)
Work with systems engineers and subsystem responsible engineers to identify and verify compliance with system safety requirements
Develop requirement verification plans and strategies to complete verification of requirements
Requirements authoring, decomposition, and traceability
Develop and mature Concept of Operations
Author and maintain interface control documents between subsystems
Implement system safety processes and identify continuous improvement opportunities
Participate in actively maintaining a healthy system safety culture
Mandatory:
•Minimum of a B.S. degree in Mechanical, Electrical, or Aerospace engineering or other technical field •5+ years systems engineering experience with system safety or reliability engineering experience performing FHAs, FMEAs/FMECAs, FTAs, and CCAs •Strong system safety and mission assurance fundamentals •System mindset and aptitude •Excellent written and verbal communication skills, organizational skills •Ability to work effectively in teams as well as lead teams •Demonstrated configuration management experience
Desired Skills:
•7+ years aerospace systems engineering experience with 3+ years system safety or reliability engineering experience performing FHAs, FMEAs/FMECAs, FTAs, and CCAs •Experience with systems engineering tools such as IBM DOORS Next Gen (DNG) Requirements Management (RM) and Rational Quality Manager (QM) •Experience with PTC Quality Solutions •Experience using PTC Creo and Windchill •Experience with Atlassian toolset collaboration tools such as Confluence and JIRA •Experience with a variety of complex aerospace or launch vehicle systems •System integration experience, preferably with aerospace hardware •Knowledge of current systems engineering processes and methodologies •Experience performing system safety compliance assessments against the following external standards: Range Safety, NASA, FAA, MIL-STD-882, or ARP-4761.
 
Job Number: WA3648
Job Location: Renton WA
Input Date: 09/10/2021
Last Updated: 10/31/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer III

Description:
A Systems Safety Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, architecting, modeling, simulating, testing, certifying and improving cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Systems Engineering or a related discipline and typically 3 years or more of relevant experience.

Systems Safety Engineer III Job duties:

* Research, architect, model, simulate, test, certify and improve cutting edge products and services.
* Work closely with design partners, developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* In charge of system-level ownership of new system safety or reliability products and processes through the product lifecycle.

Qualifications:

* Knowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.
* Experience in developing Failure Modes and Effects Analysis as well as Reliability Analysis products.
* Experience in or knowledge of System Safety Engineering analysis and products, including but not limited to fault tree analysis, hazard analysis, computer based control system (CBCS) analysis, must work and must not work function analysis, etc.
* Experience with software/hardware integration, including avionics and electrical distribution systems.

Pay Range: $37/hr to $50.87/hr

If you are interested in this Systems Safety Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314379
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/17/2021
Last Updated: 11/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician

Description:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Exclude technicians working in production or quality assurance.
 
Job Number: CJH-R- 6208
Job Location: Baltimore, MD
Rate: $30
Per Diem: Yes
Overtime: Yes
Duration: 12 Months
Start Date: 8/02/2021
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Mantha
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
A Test Engineer job in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will thrive in a fast-paced role, have a Bachelors degree in Engineering or a related field and at least three years of experience in the assembly and testing of complex electro-mechanical systems and turbine engines in the aerospace, defense, or engineering. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Test Engineer job duties:
* Define and maintain test procedures for Actuation & Turbine product lines
* Execute testing and validation/qualification of products per the defined procedures
* Support the planning and implementation of an AS9100 quality management system
* Collaborate with applicable engineers to define acceptance criteria and limits
* Create and maintain appropriate documentation including, but not limited to: traceability materials/certifications, workflows, and quality records
* Improve and streamline existing assembly processes
* Lead and/or participate in troubleshooting and root-cause analysis of quality events; support process owners in the planning and implementation of corrective measures
* Lead and/or support negotiations with customers concerning quality demand fulfillment(s) and/or resolution of quality deficiencies including preparing external customer documentation.

Qualifications:
* Bachelors degree in Engineering or a related field from an accredited college or university
* Minimum three years of experience in test engineering, operations, or manufacturing
* Minimum 1-2 years of experience in the assembly and testing of complex electro-mechanical assemblies in a production or prototype environment in the aerospace, defense, or engineering fields, ideally with turbine experience
* Prior experience working in an aerospace quality control (AS9100) and manufacturing environment, preferred
* Prior experience with project management, documentation practices, and turbine engines preferred
* Proficient level of working mechanical and electrical knowledge
* Occasional travel required
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE

If you are interested in this Test Engineer job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 315258
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 11/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Electrical/Electronic Installation Design

Description:
Job Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

Position Responsibilities:
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision

Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o College coursework and/or work experience with computer aided design tools and systems (e.g., computer aided design / computer aided manufacturing (CAD / CAM) software)
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o CATIA V5 experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with design, production, and build processes is a PLUS
o Communicator, working in teams

Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically < 2 years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46540-1
Job Location: Ridley Park, PA
Rate: $46/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/01/2021
Last Updated: 03/10/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Zuken E3 Librarian

Description:
Zuken E3 Librarian

Location: Remote

Job ID: #62168



Components librarian will support the creation of library parts for military electrical harness components. Will also be responsible for the repair/organizing/updating of existing or imported Zuken E3 library structures and components for various part types including connectors, back shells, cables, wires. This includes updating product manufacturing information and design and model attributes per industry standards.



• Desire candidate must have strong knowledge of Zuken E3 or a strong willingness to learn.

• Knowledge of harness and other electromechanical components like connectors, back shells, cables, wires, etc.

• A strong preference for mil?spec parts familiarity.

• Ability to communicate issues with Zuken application engineers.

• Good communication skills with internal customers as a service provider.

• Some familiarity with Creo is preferred.

• Detail oriented personality a plus.

• Excellent process development and documentation skills. (MS Office).



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62168
Job Location: Remote, Remote
Per Diem: Possible
Start Date: ASAP
Input Date: 09/14/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Back to Advanced Job Search