Job Search Results

636 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:16AM Pacific Time by ContractJobHunter. )

Listings 1 - 636

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2520 - QUALITY ANALYST - cv, word doc only

Description:
Implement innovative solutions that will improve the way we do business, improve quality and customer satisfaction, and reduce costs.

Manage quality projects to meet specific requirements and customer satisfaction.

Support projects by facilitating adequate communication with all stakeholders.

Be an agent of change to promote quality culture throughout the company.

Being able to investigate and identify risks.

Be a leader of opportunities for continuous improvement and problem solving.

Manage priorities in line with objectives.

Bachelor's degree in Mechanical or Industrial Engineering or DEC in Engineering or Aeronautics with a minimum of 5 to 8 years of relevant experience.

Bilingual - have a good command of French and English.

Knowledge of standards and regulations (AS9100, TCCA, FAA, EASA).

Desire for continuous improvement and problem solving.

Ability to work under pressure and meet deadlines.

Analytical spirit and ability to solve problems effectively.

Hold leadership, autonomy, ability to work in a team and professionalism.

Have a logical and flexible mind with a sense of initiative and attention to detail.

Knowledge of Microsoft computer systems.

PMP certification or experience in project management is an asset.

Project management and change management tools required.

Strongly client oriented.

Capable of influencing and mobilizing collaborators.
 
Job Number: 2520
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2531 - CABIN SYSTEMS ENGINEER - cv, word only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Working experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Strong knowledge of Commercial Aircraft interior cabin systems including in-flight entertainment system and connectivity network.
 
Job Number: 2531
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2533 - LIAISON ENGINEERING - CABINETS - cv, word doc only

Description:
Coordinate activities to evaluate and resolve engineering-related production problems encountered in assigned area of aircraft cabinet manufacturing facility or from suppliers. Review engineering specifications, orders and related information to maintain current knowledge of manufacturing methods, procedures and activities in assigned area or from suppliers.

Teamwork with quality control, material, manufacturing, logistic, method and other department personal to provide technical support.

Interprets engineering drawings and facilitates correction of errors on drawings and document identified during manufacturing operations.

Investigate reports of defects, damaged or malfunctioning parts or assemblies to determine nature and scope of problem.

Maintains records or oversees recording of information related to qualification/certification of parts/assemblies from external suppliers to ensure engineering drawings requirement and documents are well document and the product conform to all engineering drawing requirement.

Bachelor Degree in Mechanical Engineering with minimum 2 years of relevant experience.

Knowledgeable in 3D/2D Design with Catia V5.

Good communication skills including good English and French writing and verbal skills.

Team Player, working in a multi-disciplinary team

Customer-oriented with innovative problem solving skills and organized.

Autonomous, Flexible and orient toward result via your project management skill.

Design Experience in cabinet assembly, manufacturing design or cabinet installation.
 
Job Number: 2533
Job Location: Mirabel, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2535 - PROGRAM ANALYST - CHNG. MGMNT - cv, word doc only

Description:
Understand aircraft component assembly and manufacturing strategies as well as the impact on program strategies.

Identify the key risks of the project, including mitigation / reduction strategies.

Harmonize the implementation of engineering changes or assembly strategy by working closely with engineering, material logistics, quality and production departments.

Ensure a flawless implementation of change management on the production line.

Develop and implement targets and monitoring mechanisms to track performance and progress, prepare status reports and modify timelines and schedules as required.

Influencing (leadership) the day-to-day multidisciplinary team towards the achievement of program objectives.

Climb to the appropriate level of management when required.

Bachelor Degree in mechanical engineering, avionics, electrical, industrial, or electromechanical, in aeronautical manufacturing or in a related discipline.

Have experience in the aeronautical industry.

Have more than five (5) years of relevant experience.

Have initiative, are result-oriented and have the desire to make decisions.

Have strong leadership skills, as well as strong analytical, planning and problem solving skills.

Have excellent communication skills (written and spoken) and are able to influence at different levels of the organization.

Are able to work under pressure with tight deadlines while delivering quality results.

Are using the MS Office suite effectively (Word, Excel, PowerPoint, and Project).

Are fluent in English and French, both written and spoken.
 
Job Number: 2535
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
STS Technical Services is hiring A&P Mechanics in San Antonio, Texas.

Responsible for Mechanical maintenance and repair on Commercial aircraft types.

Essential Duties:

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner
Perform the duties of and provide necessary training for lower skill levels
Maintain and store various tools in a serviceable condition
Adhere to safe maintenance practices and keep a clean work area
Maintain and supply personal records of work performed on OJT forms for the Training Department
Successfully complete any courses deemed necessary by the Training Department
Perform any work that may be assigned by his or her supervisor.

Job Specifications:

Proficient working knowledge of the following skills: Safety wiring, engine servicing, engine CSD servicing, tire inflation, A/C wash rack/ cleaning procedures, A/C lube procedures, hydraulic pressurization/ depressurization, wing walker/ aircraft towing, A/C marshalling, Torque wrench values/ operation, basic safety procedures, engine cowling opening, Lab/ portable water flushing/ servicing, interior seat installation, nose radome removal/ install, application of external power, stairs/ entry door operation, APU servicing cargo door operation, jack operator, fuel tank entry procedures, operation of reader printers/ IPC, electrical HOBART, HUFFER, water service cart, general knowledge of all applicable F.A.R.’s and company policies and procedures, familiar with all paperwork procedures including job cards/ time cards, routine/ non-routine cards, S.R.M.’s, service bulletins, and work sign-off/ sell-off procedures.

Job Qualifications:

1 – 2 years’ experience preferred in heavy commercial maintenance
High school diploma or GED required
A&P License desired or specialized training

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45328
Job Location: San Antonio, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AES Mechanical Installation Engineers - Many Needed

Description:
• Experience with avionics and electrical system design to the requirements of CFR 14 Part 23 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus
• Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.
• Prepare engineering drawings for the installation of avionics and electrical equipment and wire harnesses using computer based drafting tools (CATIA).
• Perform analysis requiring frequent application of engineering principles
Email resume to: mmccarthy@pdstech.com
 
Job Number: AES-Tex
Job Location: Wichita, KS
Rate: $70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural / Stress Engineer

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear, propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover Composite and Conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:
•Static Structural Analysis and Margin of Safety Determination,
•Fatigue and Fracture Mechanics Analysis of Critical Interfaces,
•Determination of Airframe component replacement and / or retirement times,
•Specification and Design of Airframe related Static and Fatigue tests,
•Field Support and
•Formal Engineering Documentation.

Education requirement:
BS in Mechanical Engineering, Aerospace Engineering or Chemical Engineering (MS or ME preferred)

Work Experience Required:
•Minimum of 10 years of experience in the functions described above.
•Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
•Excellent oral and written communication skills are required.
Software Experience: •NASTRAN/PATRAN or equivalent FEM,
•CATIA,
•MS Office applications.

Secret Clearance preferred but not required.
 
Job Number: 1910096548
Job Location: Stratford, CT
Per Diem: split
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CABLING ENGINEER - DIRECT JOB

Description:
JSG is hiring a Cabling Engineer - Direct Hire for our client in Irvine, CA!

Knowledge, Skills and Abilities:

Specify, design, develop, fabricate, and commission custom cabling for electrical, electro-mechanical, and electronic systems encompassing high voltage and high current techniques and integration with control and data acquisition systems.
Provide detailed specifications and support the procurement of commercial off the shelf cabling products.

Produce and examine drawings, wiring diagrams, specifications and other documentation at all stages in the project from the concept through to full manufacturing, installation, and commissioning.

Support projects with confident knowledge of electrical cabling designed for EMC, safety and reliability.
Manage project documentation in accordance with requirements of the ISO 9001 quality management system.
Liaison with engineers and scientists at different levels deploying new electrical/electronic cabling systems.
Interface with engineers and physicists developing experimental and custom systems.

Required Education:

B.S. in Design/Electrical Engineering or equivalent job experience preferred.
Preferred Education: Knowledge of relevant IEEE or IEC standards is preferred
Software Knowledge and Skills:

Practical knowledge of SolidWorks 3D CAD system.
Hands on experience with CAD systems for creating cable schematics and cabling layout and mounting. Industrial electrical system simulation software is preferred.
Basic knowledge of CAD systems for mechanical design (AutoCAD, SolidWorks).
Practical literacy in MS Word, Excel, Outlook and PowerPoint.
 
Job Number: 371499
Job Location: IRVINE, CA
Per Diem: If Qualified
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Aerospace - Ellensburg WA Area

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

CNC Machinist

Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Responsibilities
Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures and certify/test product.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching

Qualifications
Must be able to efficiently setup and run one or more of the following types of equipment independently and meet expected manufacturing standards:
CNC Mill
CNC Turn
Experience & Knowledge
Required knowledge of GD&T, and ability to read blueprints, parts drawings, and setup books.
Preferred Math skills such as algebra, geometry, and trigonometry.  Desire to work in team environment: work positively and collaboratively with others, contribute to the work cell, be open and receptive to ideas and feedback, and treat others with respect
Skills & Competencies:
High school diploma or equivalent with 1-2 years related experience.
Post high school coursework or professional certification preferred.
 
Job Location: Ellensburg, WA
Rate: DOE
Duration: Contract to Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CONFIGURATION MANAGEMENT

Description:
JSG has teamed up with a Laser welding manufacturing company and i is looking for G has teamed up with a Laser welding manufacturing company and i is looking for Components/Electronics Sustaining Engineer in Los Angeles, CA!


RESPONSIBILITIES:

Specify and select electronic and electro-mechanical components based on requirements submitted by Cognizant Engineers
Work with purchasing and manufacturing engineering to specify component manufacturing and procurement sources
Investigate potential component cost reductions, second sources, and substitute components
Update component databases
Create and maintain component specifications and data sheets
Manage the components library
Estimate time required for activities related to component engineering activities
Electronics Sustaining Engineering:

Evaluate design change requests on electronic subsystems
Propose solutions to production and product performance problems
Redline and update documentation to effect changes
Discuss changes with the Cognizant Engineers
Assist in the preparation of EO release packages
Work with Nationally Recognized Testing Labs and other entities to compliance test products under CE, UL/CSA and CCC authority
Specify, conduct, and direct others to conduct and document tests on electronic items ranging from individual components to moderately complex subsystems, given detailed performance criteria and general supervision from a Cognizant Engineer
Communicate well orally and in writing with others with whom he/she works with within the Engineering and Operations departments
QUALIFICATIONS:
Must have a 2 or 4 year technical degree, preferably BSEE or BSET. A candidate with four or more years of experience in this industry is a plus.

RESPONSIBILITIES:

Specify and select electronic and electro-mechanical components based on requirements submitted by Cognizant Engineers
Work with purchasing and manufacturing engineering to specify component manufacturing and procurement sources
Investigate potential component cost reductions, second sources, and substitute components
Update component databases
Create and maintain component specifications and data sheets
Manage the components library
Estimate time required for activities related to component engineering activities
Electronics Sustaining Engineering:

Evaluate design change requests on electronic subsystems
Propose solutions to production and product performance problems
Redline and update documentation to effect changes
Discuss changes with the Cognizant Engineers
Assist in the preparation of EO release packages
Work with Nationally Recognized Testing Labs and other entities to compliance test products under CE, UL/CSA and CCC authority
Specify, conduct, and direct others to conduct and document tests on electronic items ranging from individual components to moderately complex subsystems, given detailed performance criteria and general supervision from a Cognizant Engineer
Communicate well orally and in writing with others with whom he/she works with within the Engineering and Operations departments
QUALIFICATIONS:
Must have a 2 or 4 year technical degree, preferably BSEE or BSET. A candidate with four or more years of experience in this industry is a plus.
 
Job Location: LOS ANGELES, CA
Per Diem: If Qualified
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker - Mechanical 2D & 3D

Description:
Required Check 2D engineering data and 3D models for conformance to company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.

Review all current positions posted at www.hi-tecsolutions.com/jobs
 
Job Number: 142810
Job Location: Savannah, GA
Rate: 53.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-336
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-321
Job Location: Savannah, GA
Rate: $55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
 
Job Number: 24-314
Job Location: Savannah, GA
Rate: $54.66
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer - TS I

Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Required The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior. Actively develop engineering product improvements. The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

MUST BE A U.S.CITIZEN OR PERMANENT RESIDENT
 
Job Number: 142471
Job Location: Savannah, GA
Rate: $ 55.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter II ( Rocket Center, WV ) 8913594

Description:
Design Drafter II ( Rocket Center, WV ) 8913594
6 Month Contract to direct hire potential

Pay Rate $30-40 /hr W2

Top 3 Skills:
Siemens NX experience,
2-5 years of ASME standard experience/knowledge,
mechanical industry experience, defense product experience preferred.

Job Duties:
This position will join the Design Modeling Group in Rocket Center. You will model fully defined components and assemblies using Siemens NX11, and will create/revise parametric drawings in conformance with ASME modeling and drawing standards. This position will also collaborate with various engineering disciplines to accomplish other related tasks, so the ability to work well in a team environment is a must.//

*Additional responsibilities include:
- Work with other drafters/designers, engineers, and manager on assigned projects.
- Create product/tooling designs and layouts from engineering notes, drawings, sketches and general instructions

*Basic Qualifications:
- HS diploma or equivalent is required.
- Associate’s Degree in formal educational program in Mechanical Drafting/Design/CAD or Technical design preferred.
- Must be able to obtain a DoD Secret clearance; U.S. Citizenship is a prerequisite.
- 2 years of related CAD experience is highly preferred.
- Microsoft Office experience.
- Strong mechanical skills and background.
- Comfortable working for extended periods at a work station.//
*Additional Qualifications:
- Previous experience with Siemens NX.
 
Job Number: 8913594
Job Location: Rocket Center, WV
Rate: 40
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Door Design Engineers - Many Needed

Description:
• Minimum 5 years aircraft structure and/or mechanical system design experience
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• Strong mechanical aptitude
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Project experience is desired.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit)
• Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design;
• ASME Y14.5 Geometric Dimensioning and Tolerancing fluent
• Pilot’s license, A&P rating and/or applicable hands on aircraft experience are also desirable but not required

Email resume: mmccarthy@pdstech.com
 
Job Number: Door-Tex
Job Location: Wichita, KS
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Ice Protection Design Engineers - Many Needed

Description:
• 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• General knowledge of Cessna engineering tools strongly preferred (PIOS/EEDS/Enovia V6)
• Strong mechanical aptitude
• Demonstrated ability to collaborate with multiple support functions (engineering – all disciplines, manufacturing, customer support, integrated operations, procurement, supply chain)
• Experience with Microsoft Office Word, Excel, PowerPoint are required.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design

Email resume to: mmccarthy@pdstech.com
 
Job Number: ECS-Tex
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann Mc
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 1 year contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
Job Responsibilities include but not limited to develop space craft electrical power system, support integration activities of multiple PPUs, perform analysis support of system stability, and provide worst case circuit analysis support

Our client is looking for a senior electrical engineer to work in our team to develop state of the art power electronics for spacecraft electric propulsion and high power systems. Contribute to the ongoing innovation to modernize, commercialize, modularize, and reduce mass, cost, and complexity. Great communication skills, technical innovation, depth, breadth, and passion will enable you to work effectively with cross functional (electrical, mechanical, software, system, test) product development teams. You will work on all phases of product development from proposal/concept/simulation/feasibility to design, test, production, and follow on support. You will work with major space contractors participating in space exploration and in commercial space activities.

Work within a multidisciplinary team of mechanical, software, system, project, test, and other engineers to perform the following:
10% Lead and perform proposals, feasibility studies, trade studies, and proof of concept work on complex electronics. These tasks may have immediate as well and future project and program impact.
40% Perform detailed circuit analysis, simulation, component stress analysis, and worst case analysis on complex circuits and systems.
10% Create schematics and oversee circuit board layout.
20% Bring up, verify, and debug circuits.
10% Develop and execute test plans.
10% Develop process improvements to improve effectiveness of the discipline and provide training/mentoring/guidance to other engineers to raise the level of competency of the organization.

Skills:
- BSEE with 10+ years of experience
- Must be self-starter with proven record of performance doing design work.
- Prior experience as a technical lead is desired.
- Previous avionics design hands on experience and knowledge specifically of power supply topologies and magnetic design is strongly preferred.
- Previous experience in a high reliability or highly regulated industry such as medical or nuclear industries is preferred.
- A demonstrated understanding of DoD/NASA engineering processes, materials, analysis and manufacturing is preferred.
- Must possess strong technical writing and effective presentation skills.
- Experience with Rocket Engines and Space Rated Avionics components and systems are a plus.
- Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
- Prior experience driving innovation solutions to technical problems is desired.

Education:
- BSEE or MSEE
- Requires a Bachelor of Science degree in electrical engineering or computer engineering and minimum 10 years of hands on power electronics experience, or Master of Science degree in electrical engineering or computer engineering and minimum 7 years of hands on power electronics experience.
- Specific experience in advanced, high power, electronic power conversion and related designs is must.
 
Job Number: 10282
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Centennial, CO
$34.50/hr - $57.56/hr
9 month contract
First Shift
Possible Travel
*Must Be a U.S. Citizen*

Description:
-5+ years’ experience
-Aerospace experience required
-Bachelors degree required

Main task will be to provide technical system engineering support to existing electrical ground command and control systems. This position will be based in Denver with potential trips to Cape Canaveral Air Force Station and Vandenberg Air Force base.

Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices. Duties include research and analysis of engineering drawings that include hardware at our launch sites located in Florida and California, in the Denver laboratories and implementation of data into a parameters database.

Tasks can vary from analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements. Many of our tasks involve instrumentation activities including interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware. Tasks also include creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.
 
Job Number: 10339
Job Location: Centennial, CO
Rate: 34-57
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager

Houston, TX
$41.50/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO PER DIEM SPLIT / NO RELOCATION COMPENSATION*

Description:
Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
Candidate will perform typical design engineering tasks, including modeling, and layout generation with drafting interface but must be able to effectively communicate and work cross-functionally as a team member.

This position will provide product support for a variety of space hardware electronic components and electrical systems. Additionally will include the development of new components and features. The position will play a crucial role in new product development, maintaining product integrity, evaluating change opportunities, and integrating new component designs into existing systems. Working to meet agreed upon cost and schedule commitments. The candidate should be able to read and understand schematics and wiring diagrams, analyze complex problems to identify root cause and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required. Occasional shift work required to support EVA Mission Operations.

Education/Certifications:
• Bachelor's degree with 2 to 5+ years’ experience required
• Master's degree with 0 to 2+ years’ experience
• The preferred candidate will have 2 – 5 years of experience in the integration and test of space flight qualified hardware.

Experience/Qualifications
• Sound electrical engineering background (wiring diagrams, systems analysis, motor and control applications, and control logic)
• Experience working with suppliers/3rd parties
• Experience in video and display technologies a plus
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• Strong communications and leadership ability
• MS Office applications
• Understanding of PCB assembly and other manufacturing processes Must be a U.S. Citizen, must either hold a current US DoD clearance or must be able to obtain and maintain a clearance if required, and successfully complete a U.S. government background investigation.
 
Job Number: 10323
Job Location: Houston, TX
Rate: 41.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical – 3 CREO CA

Description:
163976
Engineer Electromechanical – 3 (Job Number: 18012130)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Mar 27, 2020

Pay Rate: $50 to $52/hr

Work Schedule: 9/80

Duration of Assignment: Up to year



Job Description:

Product Engineering has an immediate need for a Mechanical Design Automation Library (MDAL) Designer to support the creation and verification of standard CAD parts and sub-assemblies utilizing our solid modeling tool (PTC Creo). Candidate must be detail-oriented with effective communication skills, at an expert level in the use of Creo, and competent in interpreting part specifications and Geometric Dimensioning & Tolerancing (GD&T) design principles.


Basic Qualifications:

•Bachelor of Science Degree plus 5 years of experience or Associates Degrees plus 9 years of experience in Information Technology, Engineering, or a related technical discipline.


•6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)


•Experience in change control procedures and processes


•Experience with Microsoft Office software


•Solid interpersonal and communication skills


•Good organizational and problem solving skills with an ability to adapt quickly to changing requirements



Preferred Qualifications:

•Knowledge and some design experience of electronic parts and assemblies


•Knowledge of government project and business rhythms
 
Job Number: MB-1716
Job Location: Redondo Beach, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III / Proficiency with RTCA/DO-178B development and verification / expert-level fluency in ANSI C and assembly / expertise with low-level software including device drivers, interrupt service routines CA

Description:
Engineer III

Work Site Address: Irvine, CA 92618
Job Number: 5962
Max Pay Rate: 60-65/hr max
12 months

2 openings

Roles and Responsibilities

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Qualifications and Education Requirements
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


Preferred Skills
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-5962
Job Location: Irvine, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical - 4 / NX / instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy CA

Description:
Engineer Mechanical - 4 (Job Number: 18016418)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Apr 29, 2019

Target End Date: Apr 24, 2020

Pay Rate: $65/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year



Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.


Basic Qualifications:

9 Years with Bachelors in Science; 5 Years with Masters; 3 Years with PhD.


Preferred Qualifications:

NX experience
 
Job Number: MB-1717
Job Location: El Segundo, CA
Rate: 65/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical 3 / Catia V5 / Solidworks / electromechanical / material packaging - Clearance CA

Description:
Engineer Mechanical 3 (Job Number: 18025198)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Jan 14, 2019

Target End Date: Dec 31, 2019

Pay rate: $52.00

Location: Redondo Beach, CA

Duration of assignment: Up to 1 year

Work schedule: 9/80


Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Basic Qualifications:
5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


Preferred Qualifications:
•5-10 years mechanical or design engineering experience
•Managing large projects
•2-5 years drawing experience (CATIA & Solidworks) is required
•Bachelor's Science degree in a STEM (Science, Technology, Engineering, Math) field
•Leadership experience
•Proficiency in packaging or material handling design
 
Job Number: MB-1713S
Job Location: Redondo Beach, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Auburn, WA
Duration: 4 months

Description:
Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares.
Extensive knowledge of mechanical engineering principles (stress analysis, fatigue, strain, etc.)
Experience working with tool and equipment systems, software, and engineering methods
Experience leading projects across functions and/or business units

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66V-Analysis Engineer

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-02162
Job Location: Auburn, WA || Everett, WA || Berkeley, MO || Huntington Beach, CA, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Vandenberg AFB, CA
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of our clients Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team.
- The successful candidate will provide management of Delta IV SLC-6 facility maintenance activities, consisting of periodic maintenance and repair of launch facility, HVAC, electrical, civil, structural and mechanical systems.
- Maintenance activities are performed by both contractor and company represented employees.
- Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance.
- Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support.
- Will work with various government support groups including Air Force and Base Civil Engineering personnel.
- Will specify and order various types of facility equipment.


Requirements:
- Experience with facilities engineering and plant operations.
- Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
- Plans, designs and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities.
- Gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility.
- Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
- Prepares bid sheets and contracts for construction and facilities acquisition.
- Reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.


Education:
- Requires a bachelor’s degree and 4 -8 years of experience.
 
Job Number: 9834
Job Location: Lompoc, CA
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Location: Windsor Locks, CT
Rate: $67.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
- Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
- This can involve testing, data analysis, and interface with all aspects of the engineering department.
- Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
- Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
- Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
- Experience with advanced instrumentation and data acquisition systems is required.
- Knowledge of LabVIEW desired.
- Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
- Applicant must have the capability of working independently and be self-motivated.
- Excellent communication skills, written and verbal are required.
- Ability to proficiently operate common Microsoft Office software products is required.
- This is a 'safety-sensitive' position as prescribed by NASA.
- Special drug testing/training needed, and inclusion in the random drug/alcohol program required.

Education:
- Bachelor's Degree required.
- 10+ years of experience with flight test instrument experience required.
 
Job Number: 10347
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Reliability Engineer (001)

Description:
*This is a full time, 10 month, contract position located, in Grande Prairie TX*



We are seeking a lead Reliability Engineer who will be working on our DoD/military Electronic Warfare systems. The candidate will be creating reliability predictions for mechanical and electrical design as well as Failure Mode and Effects, and Criticality Analysis (FMECA), working with reliability program growth plans, conducting reliability growth analysis, Corrective Action Boards (CAB) and Failure Review Boards (FRB).



Daily duties may include supporting design reviews and test activities, working with Corrective Action Boards (CAB) and Failure Review Boards (FRB), identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions, review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB). There will be a good portion of the time spent on providing inputs to engineers, performing analyses, and writing reports



Required
*7 years’ in Reliability Engineering; particularly performing reliability predictions, root cause analysis, corrective action boards (CRBs) and Failure Review Boards (FRBs).
*Experience using FRACAS and FMECA analysis
*Experience in Human Factors, and/or Testability/Built-in Test (BIT).
*Experience with Windchill Quality Solutions Reliability software tool or equivalent.
*Ability to manage subcontractors in Logistics field of expertise.
*Able to give presentations in front of large groups.
*1 job can start without clearance and get after starting, other job needs Active Secret Clearance; must be noted on top of resume.



Pluses
*4 year ME or EE degree
*Electronic Warfare systems experience
*Experience with Reliability Centered Maintenance (RCM).
*Military /Subcontract experience.
*Experience in Human Factors, and/or safety engineering
 
Job Number: 001
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design I (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
•Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-298
Job Location: Long Beach, CA
Rate: $51-$56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining mechanical manufacturing methods for Space Launch Systems (SLS) hardware and ensuring that the processes are available.

The candidate will:
•create manufacturing assembly documentation, concepts tools, provide technical assistance, in order to assemble high quality, high engineered hardware for use in space applications.
•ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
•be able to perform cost estimates, work to schedules, and write procedures and policies.
•be able to review drawings and concepts and resolve producibility concerns.
•provide technical support to the manufacturing facility as well as to the external suppliers.
•support failure investigations,
•determine root cause of failure, and
•implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
•be able work well in an integrated product development/ design environment.
•present to senior management on various topics,
•be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
•possess a positive attitude and be able communicate well with staff, IPD teams & management.

Prerequisites:
•Desired experience should include working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.

Additional Job Details:
•Person must have a Bachelor's degree in Engineering.
•2 years experience required.
 
Job Number: 1910097713
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Design Engineer

Description:
Nesco Resource is seeking a Direct Hire - Lead Design Engineer in the Central Michigan area.



As a Lead Design Engineer you will demonstrate technical leadership and project management skills. You will be responsible for design and development of new products.



Job Description:

  • Clarification and problem resolution to develop designs with the client.

  • Prepares design modifications and cross functions with tool room and engineers

  • Leader other Engineers regarding design.

  • Analyze specifications and requirements to determine designs which can be produced by existing manufacturing or processing facilities and methods

  • Determines feasibility of die, gage, and tooling/machine designs considering costs, available machine and capacity. 

  • Provides technical information. 

  • Prepares, reviews, controls and distributes detailed die, gage, tooling layouts, gage calibration prints, drawings, and schematics.  

  • Performs research and development projects.

  • Ability to work on many projects with little stress.

  • Utilizes CMM machine to layout parts and to verify/calibrate gages.


 Requirements:


  • Bachelor’s degree in Mechanical Engineering or related preferred.

  • Proficient with Solidworks.

  • Participates in APQP (Advanced Product Quality Planning) and in PPAP (Production Part Approval Process).

  • Understanding Lean or 5S manufacturing.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 18-43061
Job Location: Harrison, MI
Rate: 80000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-10-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cynthia Clarey
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Interiors

Description:
Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
 
Job Number: 19-142471
Job Location: Southeast
Rate: $54.50
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MANUFACTURING PROCESS ENGINEERS

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets.
Our client is seeking talented Manufacturing / Process Engineers to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

2-5 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the commercial, aerospace, and/or military industry.
Background in E/M or hydraulic actuation systems is a plus but not required.
Controls engineering experience is a plus.
Strong knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Must have participated in MRB material (NCR processing).
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation
Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.
Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.
Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.
Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus
Start Date: As soon as possible

Duration: 3-6+ month contract position

Location: Ft. Collins, CA
 
Job Number: 368123
Job Location: FORT COLLINS, CO.
Per Diem: If qualified
Overtime: Possible
Duration: 3-6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-320
Job Location: Savannah, GA
Rate: $64 - $68
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Systems or Structures

Description:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems

Duties and Responsibilities:
• Resolves complex engineering problems related to the build of the aircraft
• Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required
• Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working
• Reviews, develops, and implements revised/new processes using six sigma/lean principles
• Provides an acceptable disposition of non-conformance of commercial mechanical systems or structures encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects
• Documents how to repair the discrepancy using engineering principles
• Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings
• Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality
• Incorporate design changes using CATIA V5

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelor's degree in Engineering or related field of study
• 6 years’ experience serving as a Liaison for MRB Structures is required
• Computer proficient with experience in Microsoft Office Programs (SAP a plus)
• Excellent written and oral communication skills

Knowledge, Skills and Abilities:
• Experience with MRB design, or repair of structures
• Knowledge of corrosion prevention
• Knowledge of non-destructive testing
• Advanced knowledge of Aircraft Structures or Systems
• CATIA V5, and Standard Repair Methods (SRM)
• Extensive experience with Six Sigma

The Structures Company is an AA/EOE.
 
Job Number: 245
Rate: $55/HR
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
Desired experience should include working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.

Person must have a Bachelor's degree in Engineering. 2 years experience required.
 
Job Number: 159
Job Location: Winsdor, CT
Duration: 12-18 months
Input Date: 11/14/2020
Firm Name: RCM TECHNOLOGIES INC
Attention: Kelly Krupa
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Completions, Planning)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Electrical Engineering, Planning
Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546

Description:
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546
6 Month Contract

Pay rate: Open, depending on experience

**Active Top Secret Clearance required

This Manufacturing Engineer is responsible for Mechanical Integration & Test support on flight mechanical subassemblies and spacecraft integration & test activities at NGC's Gilbert Az. campus. Operations are performed in a manufacturing production environment where I&T Mechanical Engineers coordinate and oversee mechanical build and production operations performed by the technical staff.

The Ideal candidate shall possess a Bachelor's degree in Mechanical Engineering plus 2+ years of related experience in the satellite/aerospace industry.
The candidate should be capable of interpreting complex engineering drawings, schematics, diagrams, and specifications, must possess good technical writing skills, display leadership skills, and possess excellent interpersonal skills and written communication ability. The candidate should have some experience in handling delicate components and should have a good working knowledge of manufacturing processes applicable to the manufacture of spaceflight hardware or equivalent.

The candidate must have the ability to support on time and on-budget product delivery by establishing and monitoring daily production goals, recognizing and reducing/eliminating non value operations, support lean principals for process improvements, and support performance metrics regarding quality, delivery, and cost.
Additionally, the candidate should be able to recognize, coordinate and/or support the resolution of anomalies and discrepancies (TF’s & NCR’s) and work with teammates (Engineering, QA, Management, Customers) towards prompt resolution.

Experience using MES is a plus and will be required for daily activities. This position may require off hour shift work, weekend work, and extended daily hours to meet production demands. Knowledge of basic 3D Modeling, Excel, Word, Powerpoint, and Tool Control helpful but not required. An understanding of ESD, FOD, and 5S processes desired. TipQA, Windchill, MES, Costpoint, and CREOView preferred.
 
Job Number: TS8912546
Job Location: Gilbert, AZ
Rate: open
Per Diem: no
Overtime: yes
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
4. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
5. Investigate and assist in preparing justification for equipment and facility requests.
6. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
7. Participate in Design for manufacturing assessments with Engineering.
8. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
9. Perform audit of co-workers output based on defined requirements and procedures.
10. Must demonstrate knowledge of ME policies and procedures.
11. Incorporate Lean Manufacturing Methodology into existing and future processes.
12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
14. Support all Safety, Sustainability and Ergonomic Initiatives.
15. Aid in development and maintenance of Business Continuity Plan.
16. Author DRDI/DMT rework instructions to support effective corrective actions.
17. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
18. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10424
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.


Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-287
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Senior / Bachelors Degree Required GA

Description:
7800 Manufacturing Engineer Senior
Dublin GA
45/hr max

In this role, you'll bring to the table proven methodology that increases productivity by introducing efficient, reliable and LEAN solutions as you evaluate complex manufacturing processes. Day to day, you’ll be engaged in the following: conducting process audits/analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with suppliers and soliciting observations from operators & production technicians with the goal of improving our manufacturing process while reducing costs and increasing profits.

Ideal candidate will have hydraulics, precision machining, and automation experience in a manufacturing environment, formal six sigma training (preferably Black Belt) a solid knowledge base and understanding of lean principles and demonstrated ability developing and maintaining labor standards.


Required: Bachelors degree in Manufacturing Engineering or related field. Six or more years experience.


Preferred: Six Sigma Green/Black Belt, Society of Manufacturing Engineering or Mechanical Engineering certification.
 
Job Number: JK-7800
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
7801 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-7801
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree Required GA

Description:
7847 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
MUST have a Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.

1. Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. Society of Mechanical Engineering certification desired.
3. Knowledge of manufacturing and production engineering principles, concepts and general business operations.
4. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants.
5. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT).
6. Ability to use standard business applications software and/or specialized data analysis tools.
7. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems.
8. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact.
9. Ability to work within general work objectives regarding projects and team goals.
10. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-7847
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer-Brazing

Description:
This Temp-to-Direct Manufacturing Engineer’s primary function is to help drive continuous improvement throughout the organization. This includes identifying and removing waste from the current products and processes, implementing lean manufacturing concepts into the production and support processes, recommending improvements in safety and environmental compliance, engaging the operations team members through specific training, and focused project management. The Manufacturing Engineer also supports the engineering and manufacturing teams with CAD design, machine programming, tool and die design and qualification, and management of the change control processes.

QUALIFICATIONS:
Bachelor of Science degree; Manufacturing/Industrial/Mechanical Engineering or related technical field.
Experience in a fabricated metal product-manufacturing environment required.Hands-on experience preferred.
Must be experienced with lean manufacturing and other current manufacturing concepts, practices and procedures.This includes Kaizen, 6-sigma, shop floor interface, product testing experience, quality tools, standard work, visual controls, mistake proofing, etc.
Ability to develop and maintain PFMEA documentation
Knowledge of vacuum brazing desired; both low and high temperature.
 
Job Number: 23194
Job Location: Buffalo, NY
Duration: Temp to Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHN GALT STAFFING INC
Attention: Al Dubosky
Address: 77 S BEDFORD ST STE 325
City, State: BURLINGTON, MA 01803
Phone: 781/273-9995
800 Phone: 888/946-4754
Fax Phone: 781/273-9099
Website: www.j-galt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

Required Skills:
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.
 
Job Number: 10428
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10435
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer who would like to learn and contribute to the Design Process. This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.

The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is both an individual contributor and mentorship level position.

The candidate will:
• Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work. Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
• Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
• Implement and support Standard Work processes across all programs to deliver consistent results.
• Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
• Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
• The candidate must be a US person:

Education / Certifications
• BSME or AE minimum, MSME preferred

Experience/Qualifications
• Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
• Prior experience in Aerospace Structures and Engineering Fluid Component Design.
• Knowledge of drawings, geometric tolerancing, and drawing interpretation.
• Experience with Manufacturing techniques for limited production hardware.
• Ability to work within a matrix organization to achieve team and program goals.
• Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
• A positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
• Seven (7) to fourteen (14) years’ experience desired.

Industry Experience:
• Previous experience in Aerospace Component Design desired

Optional:
• Pro-E/CREO/Simulate preferred.
 
Job Number: 1910096941
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Ability to obtain and maintain a secret level security clearance

Familiarity with C130 or other military aircraft platform

Experience with Catia V5 or similar 3D parametric modeling program Demonstrated ability to turn requirements into design solutions in a aircraft or similar engineering/development role Demonstrated previous success working in a team based environment to meet objectives Strong communication skills, both oral and written Experience with Teamcenter or similar PLM software tool Familiarity with or exposure supporting the manufacture of sheet metal or milled components Experience or familiarity with engineering change documentation Familiarity with ANSI, ASME or related design and drafting standards
 
Job Number: 0449
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10407
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Checker with CREO (156)

Description:
*This is a full time, 9-12 month contract position, located in Grand Prairie, TX*



We are seeking a Mechanical Designer/Checker who has experience in mechanical design with a background in military applications and standards.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.



Required:

*11 years’ experience in designing, checking and drawing release of military parts/systems (structures, materials, processors and parts selection).

*Creo experience
*Experience with ASME Y14.5M-1994; GD&T (Dimensioning & Tolerancing)

*Active Secret or Active Interim clearance.

Preferred:

*Experience using CATIA

*Mechanical Computer Aided Drawing (MCAD) skills

*Previous use of one or more PDMs

*Knowledge ASME Y14.24M engineering drawings and general drafting practices of IAW ASME Y14.100.

*Familiar with MIL-T-3100 and MIL-STD 100

*Engineering degree
 
Job Number: 156
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Engineer - Creo/Catia Secret Cleared (063)

Description:
*This is a full time, 1 year contract, located in Orlando*
*Must have an Active Secret Clearance in order to apply (this requires US Citizenship)*



We are seeking a Design Engineer who has experience in designing mechanical or machined parts used in aerospace vehicle production. packaging design, layouts, packing schemes and datalink design.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Packaging design, layouts, modelling, packaging,
materials analysis, ability to create Interface Control Drawings (ICDs), Instructional Engineering Releases (IER), materials analysis, trade studies, as well as hardware integration and testing.



Required:
*5-10 years’ RECENT designing/drafting experience using Creo 2/3 or Catia V5.
*Experience in creation and reading of documentation of drawings and BOMs
*Knowledge of ASME Y14.5M-1994 Geometric Dimensioning & Tolerancing (GD&T)
*ASME Y14.24M Engineering drawings and general drafting experience practices of IAW ASME Y14.100.
*Occasional travel to manufacturing sites in Ocala, FL or Troy, AL
*Active Secret Clearance
*AS Degree with 10+ years’ experience or 5+ year with a BSME.



Preferred:
*Experience with Windchill



Benefits
*5 Medical plan options and dental plan available
*Per diem split is available for out of the area applicants
 
Job Number: 063
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / MCAD Drafter

Description:
The ideal candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. This may include utilization of computer aided design applications.

The Mechanical Designer/MCAD Drafter will work with emphasis on Aerospace Electronics Packaging. Activities will include:
• mechanical conceptual layout,
• detailed design, and
• engineering documentation.

The Designer/Drafter will interface with other engineering groups to insure design requirements are fulfilled. The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints. The position will work with cross functional teams to resolve issues.

Responsibilities may include:
• New product development from concept through production.
• Generate detailed solid models and engineering drawings.
• Processing documents through document change system.

Requirements:
• Must be experienced with Teamcenter and NX modeling software and have Aerospace Packaging experience.
• Minimum 8 years Mechanical Design Experience
• Minimum 8 years Solid Modeling Experience.
• Experience with Siemens Teamcenter PLM Software.
• Strong knowledge of GD&T ASME Y14.5.
• Strong knowledge of Manufacturing Processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills.
• Close attention to detail
• Must be a US citizen or permanent resident.
• Good organization and planning skills

Preferences:
• Related technical degree
• Siemens NX11
• Background working on Avionics Design- related experience
• Familiarity with DO-160 and DO-254 development guidelines

Critical competencies:
• Customer Focus,
• Drive for results,
• Technical skills,
• Interpersonal savvy,
• Commitment to Continuous Improvement,
• Effective Teamwork.
 
Job Number: 1910097975
Job Location: Phoeniz, AZ
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer Drafter / NX OH

Description:
Request number: 5752
Job title: Mechanical Designer Drafter
Job code: Number of openings: 2

Position location: Orrville - OH
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No

Maximum Hourly Pay Rate: 24
Start Date: 12/17/2018
Tentative End Date: 12/16/2019

Job Description

As a Mechanical Designer-Drafter, you’ll be part of a product engineering design and development team working closely with engineers to develop their thoughts and sketches into layouts, drawings and schematics.

Here’s what you can expect as a Mechanical Designer-Drafter

· Contribute to a cost effective design and functional products.

Insure basic integrity of designs and layouts.
· Review tolerances for impact on fits, design requirements, and effects on costs.

· Act as a focal point for projects as they progress from concept to release.

· Create drawings and 3D models from varying levels of instruction or input

To take on this role, you’ll need
Associate’s Degree, preferably with technical focus.
3 years of related experience including 3D modeling and drawing experience (preferably NX)
Comprehensive knowledge of good drafting practices and techniques, machine shop practices, part fabrication methods, mathematics through descriptive geometry, dimensioning techniques, and geometric tolerancing.
Strong communication skills and attention to detail.
Ability to be flexible with job duties transitioning from parts coordination to drawing and modeling. Able to tolerate ambiguity and work with limited direction.


Request status: Open
 
Job Number: MB-5752
Job Location: Orrville, OH
Rate: 24/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer


Location: Cary, NC

12+ month contract






Description:

MANDATORY QUALIFICATIONS:
•B.S. in Mechanical Engineering or related discipline with 5-10 years of Design, Analysis, or Test Engineering experience
•Experience in Solid modeling. Autodesk Inventor preferred.
•Strong technical aptitude, analytical, and problem-solving capabilities.
•Excellent interpersonal and communication skills, both verbal and written
•Technical writing experience with clear and concise report and coordination memo writing.
•Ability to work in a cross functional team environment

PREFERRED REQUIREMENTS
•Understanding of good design principles and GD&T.
•Drafting experience including 3D modeling and drawing creation.
•Structural analysis (hand calculations & FEA) experience
•Ability to review and implement customer requirements
•Excellent time management and negotiation skills.
•Ability to manage multiple assignments.
•Ability to translate customer requirements into viable technical and commercial solutions.
•Ability to understand and apply theory to complex problems and use engineering judgement.






DESCRIPTION OF WORK/PROJECT:

The clients Electromechanical Product Development group is seeking a highly motivated individual to work with the team on the design, testing, and implementation of aerospace systems. Specifically the team is looking to support the development of products from initial concept, through prototyping, until final flight-testing. A strong design background is required to successfully develop a product from concept to production in a profitable manner. The position will require collaboration with our global engineering and manufacturing teams to execute the product development process.


















____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56102
Job Location: Cary, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Location: Palmdale, CA
Duration: 9 month contract
Shift: 1st or 2nd shift and weekends.
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****Bachelor's Degree or Master's Degree required****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.


Requirements:
- Experience with Architecture of hydraulic systems
- CATIA V5 experience.
- Experience generating subsystem layouts and designs.
- MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
- Self-motivated and ability to work in a fast paced aircraft design environment.
- Experience leading small engineering teams
- Microsoft Office proficiency.
- Excellent oral and written communication skills.

Education:
Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10236
Job Location: Palmdale, CA
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
The Sr. Mechanical Engineer would work closely with our supply chain department in support of land combat vehicles for the US Armed Forces. For this assignment, you will function as liaison between purchasing, engineering, manufacturing and suppliers to resolve supplier performance issues and to provide technical support. The Sr. Mechanical Engineer is also responsible for collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability.
In general, responsibilities will include:
* Ensure a safe working environment and compliance to safety objectives and policies
* Review and assess supplier manufacturing processes and quality systems, providing feedback as appropriate.
* Improve quality, delivery & cost performance of suppliers through well thought out fact based improvement plans.
* Manage supplier improvement plans.
* Analyze supplier quality & delivery metrics to identify trends and pinpoint systemic performance gaps and root causes.
* Evaluate alternative suppliers to ensure a smooth assembly flow of Combat Vehicle product.
* Conduct/Lead investigations of major problems and/or special projects focusing on developing strong partnerships with suppliers.
* Lead suppliers through the corrective action process when supplier rejects are issued.
* Travel to domestic suppliers, as needed ~25%
REQUIRED SKILLS:
* Basic functional understanding of components within vehicle systems, including pneumatics, hydraulics, powertrain, suspension, brackets/mounts, and general mechanical weldments.
* Ability to read mechanical drawings, electrical schematics, and fluid diagrams
* Act independently on general direction to research assigned commodities
* Excellent collaboration skills with cross-functional teams and project/program leads to continuously drive improvement in the supply base
* Effective verbal and written communication skills
* Proficiency Microsoft Office, specifically Excel
* Ability to analyze bills of material and to understand drawing key requirements

PREFERRED SKILLS:
* Experience with PTC CREO to open models and drawings
* Familiarity with PTC Windchill product data management system

REQUIRED EXPERIENCE:
* 5 years of vehicle engineering experience
* 2 years working on-site with suppliers and/or customers
* Experienced in identifying cost reduction opportunities
* Former experience in analyzing technical data, designs, preliminary specifications, manufacturing limitations, or supplier facilities.

REQUIRED EDUCATION:
Bachelor of Science in Mechanical Engineering
 
Job Number: 47130
Job Location: Sterling Heights, Mich
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
vehicle engineering experience
working on-site with suppliers and/or customers

Experienced in identifying cost reduction opportunities
Former experience in analyzing technical data, designs, preliminary specifications, manufacturing limitations, or supplier facilities.

Experience with PTC CREO to open models and drawings
Familiarity with PTC Windchill product data management system
 
Job Number: 45961
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Defect Investigator - Automotive

Description:
One of the world's leading heavy truck manufacturers is looking for a Mechanical Engineer to join their team for a potential contract to hire position! We are looking for an outgoing individual who is solution orientated, has excellent organizational, analytical, and problem solving skills. In addition, have the proven ability to accomplish tasks with the highest standards of ethics. Also, they should have a proven track record of developing strong working relationships with employees and senior level managers.

Job Duties

Conduct safety and emissions defect and noncompliance investigations, fact finding, technical analysis, and reporting based on inquiries raised by regulatory agencies and internal to the Client.
Conduct, analyze and review warranty data seeks to identify potential emission and safety issues, and perform production data seeks to identify affected vehicles.
Produce drawings and documents in response to inquiries.
Prepare emission and safety compliance documents needed for approval of proposed recalls and filing of same with government agencies. i.e., EPA, NHTSA, and Transport Canada.
Analyze and submit mandatory reports to government agencies.
Prepare graph presentations to present findings
Required Qualifications:

Bachelor's degree in Engineering (prefer mechanical or electrical)
3-5 years of experience (unless the worker has previous Client experience then the Manager is ok with less experience)
Quality and/or Defect compliance background
Automotive industry experience highly preferred
We are looking for an outgoing individual who is solution oriented, has excellent organizational, analytical, problem solving skills, and writing skills. In addition, have the proven ability to accomplish tasks with the highest standards of ethics.
The ideal candidate will be a self-starter and able to work with limited supervision, be very detailed orientated and will be required to investigate every assigned case with the intention of becoming thoroughly knowledgeable on the issue under investigation.
Strong analytical skills
Effective interpersonal and communication skills and the ability to work effectively with others
Ability to prepare and submit required compliance documentation to government, with strong writing skills required.

Preferred qualifications:

Substantial knowledge of heavy-duty vehicle and engine safety and emission control systems, or hold commercial driver’s license (CDL), or have the ability to obtain a CDL.
Prior experience with warranty Analysis or other similar data analysis.
Legal and/or regulatory experience would be considered advantageous.
Physical ability to navigate and inspect various safety related components on a commercial vehicle required for investigations.
Additional Information

Hours: Mon - Fri 8am - 5pm
Duration: 6+ months (possibility to extend or turn permanent)
Pay: DOE
Location: Portland, OR
 
Job Number: 5589
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+mo C2H
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Hydraulics & CATIA (309)

Description:
*This is an 8 month, full time contract position, located in Palmdale, CA*

We are hiring for a mechanical engineer who will be using CATIA V5 to design hydraulic systems for military aircraft. Position will also involve integration, layouts analysis and testing of designs. Candidate may be involved in final installation of systems.
Required:
*9 years experience in hydraulic system design using CATIA.
*Good subsystems design and layout experience
*Ablity to to work 1st or 2nd shift and weekends
*Active Secret Clearance (with investigation within the last 5 years)
*Engineering degree

Pluses:
*MRB skills
*Some previous experience in leadership
 
Job Number: 309
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: NO
Overtime: POSSIBLE
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / Catia V5 / hydraulic systems - Clearance CA

Description:
Engineering - Mechanical Engineer
Work Location: Palmdale, CA
Status: Open
Rate: Open
Qty: 1
Desired Start Date: 1/21/2019
End Date: 9/27/2019

**Position requires people experienced in hardware integration, troubleshooting, and MRB (e.g., identifying workarounds & resolving trouble tickets). The build phase is on an aggressive schedule and having additional help with help meet the schedule milestone.

Job Description:
Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.

o Experience with Architecture of hydraulic systems
o CATIA V5 experience.
o Experience generating subsystem layouts and designs.
o MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
o Self-motivated and ability to work in a fast paced aircraft design environment.
o Experience leading small engineering teams
o Microsoft Office proficiency.
o Excellent oral and written communication skills.

**Must be able to work 1st or 2nd shift and weekends.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1309-1S5
Job Location: Palmdale, CA
Rate: open
Per Diem: no
Duration: 9 months
Start Date: 1st or 2nd shift and weekends
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA V (089)

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*12-15 years’ experience in electronics/wire harness design using CATIA V5.
*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Per diem split is available for those travelling for this position

*Must have an Active Secret Clearance (reinvestigated in last 5 years)

*Engineering Degree
 
Job Number: 089
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
• Perform preliminary and detail design of aircraft mechanical systems, including flight controls, landing gear and ECS systems.
• Create 3D/2D definition.
• CATIA V5 is a plus.
• Participate in the Engineering definition review, approval and release process
• Support the review of manufacturing plans and procedures to ensure compliance with design requirements
• Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
• Ability/Interest interacting with the shop floor.

The Structures Company is an AA/EOE.
 
Job Number: 264
Job Location: CA
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043

Description:
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043
8 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

Active Clearance preferred, Secret or TS

Seeking TS/SCI candidates with 3-5 yrs+ exp in payload/spacecraft integration.

- Hands-on detailed work required, including extremely fragile space product installations, modifications, and general handling.
- Ability to demonstrate detailed technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams.
- 100% adherence to established ISO processes, diligence to detail, and efficient execution with quality results for cost effectiveness *absolutely required*.
- Ability to learn quickly. Bonding, taping, torquing, etc. with delicate honeycomb composite/aluminum panels and aluminum brackets a minimum. Must have 'a touch' for delicate equipment. Must have virtually zero defects in workmanship.
- Ability to proactively identify issues, escalate to appropriate channels, and *offer* solutions to engineering for review. -
- Ability to work with diverse team, take constructive feedback from QA support personnel.
- Experience with working inside Clean Rooms, Hazardous Material Handling, Hazardous Operations protocols, and related operational protocols required.
- Knowledge of Excel, Word, Powerpoint, general computer handling, and Tool Control required. ESD, FOD, and 5S management techniques required. 3D CAD, TipQA, Windchill, and CREOView preferred.
- Knowledge of advanced machine shop principles helpful. Little to no machine shop work is done by I&T Techs, but interfacing with Machine Dept. required on occasion.
 
Job Number: TS8946614 and 9293043
Job Location: Dulles, VA
Rate: OPEN
Per Diem: NO
Overtime: yes
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer II

Description:
POSITION PURPOSE
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

UNIQUE SKILLS
• Must be proficient NC Programming in CATIA V5.
• Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
• Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.

ADDITIONAL FUNCTIONS
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

EXPERIENCE/EDUCATION
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Number: 24-308
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer III

Description:
Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
• Assist in training and guiding lower level engineers as needed.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Perform other duties as assigned.

Other Requirements:
• Strong knowledge of various machining and drafting methods, technical writing, and computer use.
• Ability to read and interpret complex blueprints and engineering drawings.
• Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
• Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 24-316
Job Location: Tulsa, OK
Rate: $62.50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer III

Description:
Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
• Assist in training and guiding lower level engineers as needed.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Perform other duties as assigned.

Other Requirements:
• Strong knowledge of various machining and drafting methods, technical writing, and computer use.
• Ability to read and interpret complex blueprints and engineering drawings.
• Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
• Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 24-350
Job Location: Tulsa, OK
Rate: $62.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control (NC) Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Must be proficient NC Programming in CATIA V5.
- Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
- Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 10195
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Engineer II

Description:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.

Requirements:
• Good verbal and written communication skills required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.
 
Job Number: 24-307
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PIPE LINE MECHANICAL ENGINEER

Description:
JSG is looking for a Mechanical Engineer for a 6+ months contract opportunity in Omaha, NE!

Description:

Requires engineering degree in specific discipline and 0-4 years engineering experience
Prepare designs for pipeline, meter, regulator and relief valve sizing and compression facilities
Specify materials to be purchased to implement facility designs
Develop project implementation schedules
Prepare cost estimates
Perform engineering studies involving data analysis and process flow analysis and written reports
 
Job Number: 370734
Job Location: Omaha, NE
Per Diem: If Qualified
Overtime: Possible
Duration: 6 + months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB (Printed Wiring Board) Design Engineer III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $50.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
- The primary duty is to generate PWB on AR-provided Altium PWB Design and/or Mentor Graphic Board Station Tools for applications on the RS-25, Next Step, AEPS programs.
- This assignment will require an experienced individual that can work closely with electrical/electronic circuit designers and electro-mechanical designers in a team environment.

Skills:
- Extensive (10+ years) experience in the design, development and generation of PWB drawings.
- Experience in the use of S/W tools associated with PWB design is required and the ability to operate the Altium PWB is mandatory.
- Experience in MENTOR Board Station Design tool is also desirable.

Education:
- BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
 
Job Number: 10281
Job Location: Canoga Park, CA
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Technician

Description:
Our client is looking for a Process Technician in Pennsylvania! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Electro-mechanical assembly, to include Flight CCA fabrication, Flight CCA rework (SMT and Plated thru hole configurations) Avionics module and black box assembly and cable and harness fabrication.

Mandatory Qualifications and Experience:
* Min. High School diploma or equivelent
* Minimum of 5 years of Flight level soldering, Flight electro-mechanical assembly (avionics black boxes) and Flight CCA fabrication
* Must possess or have the ability to acquire the following: JSTD001 - Flight Hand Soldering certification (previously known as NASA Hand Soldering) NASA Cable/Harness certification NASA Polymerics certification
* Must have the ability to receive a DoD Secret Clearance.
* Must take vision test

Desired Qualifications and Experience:
* Active JSTD001
* Active NASA harness certification
* Active polymerics certification

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129259
Job Location: King of Prussia, PA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Planning and Scheduler 1 FL

Description:
Product Planning and Scheduler 1 (Job Number: 18026551)

Number of Openings: 4

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jan 7, 2019

Target End Date: Jan 3, 2020

Description

Pay Rate - $23.50

Duration of Assignment - Up to 1 year

Clearance - None

Location - Melbourne, FL

# of Openings - 4

Position Summary / Responsibilities


Plans, prepares, issues and controls production schedules and coordinates with material requirements to ensure a controlled flow of approved materials timed to meet production requirements. Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials and services are provided as needed. Schedules equipment and personnel, confirms material supply and demands, prepares work orders or purchase requests for the production or purchase of components or parts based on a master production schedule, shop load and inventory requirements. Coordinates interdepartmental activity with quality assurance, manufacturing, purchasing, engineering, inventory control, traffic, etc.; schedules and expedites the movement of parts by means of move orders, stock transfers and requests for shipping orders.




Essential Functions:
•Supportprogram hardware and software procurement
•Workon Test & Evaluation Work Orders (TEWO’s) and Engineering FabricationOrders (EFO’s) in support of mechanical and electrical fabrication tasks
•Developdetailed Bill of Material (BOM)
•Lookup pricing and gather quotes
•Enteritems listed on engineering drawing’s BOM into Engineering Property System(EPS)
•Completeforms and waivers required for certain purchases, such as Single SoleSource Justification (SSJ), IT Waivers, and Chemical Review Surveys
•Allhardware and software deliveries will need to align with the schedule ofthe IMS
 
Job Number: MB-1714
Job Location: Melbourne, FL
Rate: 23.50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Quality Engineer (QE) Lead

Description:
This position will support the USG Military Combat Rescue Helicopter Program (CRH). The QE will support the AS9100 Compliant First Article Inspection (FAI) requirement in Final and Major Assembly.

The individual will be generating Inspection Check Lists (ICL) and monitoring FAI execution to include monitoring overall ICL effort and maintenance of metrics.

Requirements
•Model based definition (CATIA) experience
•Bachelors' Degree in Manufacturing or Mechanical Engineering
•Previous experience in Quality Leadership
•Seven (7) to ten (10) years of experience
 
Job Number: 1910097898
Job Location: Stratford, CT
Per Diem: split
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - High Lift Systems

Description:
We are seeking an enthusiastic and experienced Project Engineer to work with the High Lift Systems for an exciting new aircraft project here in Rockford, IL.


Responsibilities:
•Support Supplier Integration Team activities as a project engineer of Mechanical System Design Group for High Lift Systems fora new regional jet aircraft program.

•Represent in a technical capacity and provide support for compliance test witnessing at partner/supplier sites and test Laboratory locations within U.S.

•Provide Qualification and Partner Liaison Coordination Support for Flight Control Systems (High Lift Systems) components.

•Develop and review Qualification Test Plans and Procedures jointly with Supplier for DO-160 and other tests, Review Qualification Test Reports, Similarity and Analysis reports.

•Witness tests as a ‘Test Director” and report on environmental, functional and performance qualification test completion and results in accordance with engineering and quality processes and standards.

•Provide support for test schedule development and tracking metrics and test coordination.

•Provide support for component qualification technical issue resolution and tracking.

•Prepare and issue agenda and status report of test activity.

•Provide support for generation of Test Witness Record (TWR) when Regulatory Agency representatives from JCAB, FAA, EASA or Certifying Staff are present.

•Provide support for Test Procedure deviation documentation as needed during test support.

•Provide support for component qualification document deliverables tracking.

•Support test failure case disposition/resolution and article tear down witness and reporting activities at supplier sites as required by technical teams.









Requirements
•Preferably 10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities.

•Must have experience with life cycle development, test and qualification and certification documentation (QP, QTP, QTR, QSAR) of Electro Mechanical and hydraulically powered Equipment such as:Â slat and flap actuation systems, power drive units, driveline components, position sensors, pumps and valves.

•Have flexibility to travel to partner or supplier locations to support program certification needs as required.

•Willingness to work long hours when requested by the Lead/Manager to support program needs.

•Must have a positive, pro-active attitude, and communicate effectively within a multidisciplinary work culture.

•Be willing to learn, appreciate, and blend into Japanese work and business culture.

•Must be able to travel as required to head office in Nagoya, Japan and Moses Lake Flight Test Center in Washington State as well as Supplier/Partner sites in U.S. to support test witnessing, component conformity inspections, workshops and technical interchange meetings.
 
Job Location: Rockford, IL
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / IPD Team Lead

Description:
Project Engineer / IPD Team Lead

Location: Windsor Locks, CT
Pay Rate: $48.25/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
Project Engineering Integrated Product Development (IPD) Team Lead will provide continuous support of environmental controls for the US Navy. The environmental controls include oxygen generation and CO2 removal for VIRGINIA, OHIO and COLUMBIA classes of submarines. The successful candidate will be working on the support of the qualification and production builds of our many different products. Additionally, the candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to drive delivery of these products within the approved budget and schedule. Familiarity with SAP, and UTAS Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and will play a critical role in driving project execution while meeting both internal and external customer expectations. This position requires creation and delivery of technical presentations to management and customers.

Additional:
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 5+ years leading teams and managing projects Prior experience working with or managing multi-disciplinary teams in a fast paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with product qualification, and production build and test (specifically with respect to low volume Navy hardware)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Experience troubleshooting (specifically with respect to MRB disposition) in troubleshooting problems on the production floor and coming up with creative solutions that maintain product quality while minimizing cost/schedule impact
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in regular reviews with the customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 9992
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineering Integrated Product Development (IPD) Team Lead (Naval Submarines)

Description:
PDS Tech is seeking a Project Engineering Integrated Product Development (IPD) Team Lead in Windsor Locks, CT.

The Project Engineering IPD Team Lead will provide continuous support of environmental controls for the US Navy. The environmental controls include oxygen generation and CO2 removal for VIRGINIA, OHIO and COLUMBIA classes of submarines. The successful candidate will be working on the support of the qualification and production builds of many different products.

Additionally, the candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to drive delivery of these products within the approved budget and schedule. Familiarity with SAP is a plus. The IPD team lead will report directly to the Program Engineering Manager and will play a critical role in driving project execution while meeting both internal and external customer expectations. This position requires creation and delivery of technical presentations to management and customers.

Requirements
• BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - Graduate degree preferred.
• 5+ years leading teams and managing projects
• Prior experience working with or managing multi-disciplinary teams in a fast-paced environment
• Excellent verbal, written and interpersonal communication skills
• Experience and familiarity with product qualification, and production build and test (specifically with respect to low volume Navy hardware)
• Natural presence/comfortable presenting to internal and external customers
• Demonstrated command of RRCA methodology and tools
• Experience troubleshooting (specifically with respect to MRB disposition) in troubleshooting problems on the production floor and coming up with creative solutions that maintain product quality while minimizing cost/schedule impact
• Ability to bring team members together and work problems to resolution
• Ability to work independently and as part of a team
• Proven planning, adaptability, organizational and negotiation skills for effective team management
• Ability to anticipate project risks and build contingency plans
• Manage hardware contracts from stages of proposal through delivery, including tracking procurement status, establishing engineering and operations efforts, and oversight of assembly and test progress.
• Interface with both internal operations and engineering functions to facilitate assembly, test, and delivery of hardware.
• Participate in regular reviews with the customer to communicate status of contracts and schedule.
• Provide direction to IPT (Integrated Product Team) for actions on in-process hardware.
• Develop and manage program schedules to drive on-time contract deliveries.
• Participate in contract proposals, including BOE and BOM estimates.
• Utilize Earned Value methodology to forecast program demands and track project completion.
• Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers
• Project Management Professional (PMP) certification is a plus.
• US Citizen
 
Job Number: 1810094034
Job Location: Windsor Locks, CT
Overtime: yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Lead - Repair Engineering

Description:
Project Lead - Repair Engineering
Contract-to-hire
Location: Kansas City, MO
Summary:
We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
• Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
• Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
• Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
• Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
• Identify performance related issues and provides feedback to management.
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
• Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
• Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
• Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
• Approve engineering documents within authorized signatory level.
• Assist in interviewing and making hiring recommendations for new Engineering personnel.
• Participate in the development of work statements and hour estimates in support of proposals.
AUTHORITY:
The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
SKILLS AND KNOWLEDGE:
• Experienced with OEM airframe, system, and interior design practices.
• Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
• Self-motivated and multi-tasker; able to level load own workload.
• Strong time-management, and problem-solving skills.
EDUCATION AND/OR EXPERIENCE:
Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55916
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Tech

Description:
Tests and inspects products at various stages of inspection process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties.

In addition to the qualifications for a Quality Control Inspector I, the Inspector II position requires the ability to conduct First Article Inspections on all detail parts for aftermarket custom aerospace products such as cabinetry, air medical, or ballistic armor.
This position will also require the use of articulating arm CMM and 3D scanning inspections.
Essential Duties and Responsibilities include the following:
• Ability to interpret engineering blue prints, source control drawings, and OEM part verification.
• Selects articles for tests at specified stages in inspection process, and tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics.
• Records test data, applying statistical quality control procedures.
• Evaluates data and writes reports to validate or indicate deviations from existing standards.
• Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.
• Conducts First Article Inspections on detail parts per AS9102.
• Must be proficient using most precision inspection tools to obtain measurements.
• Have knowledge of alloys and material certifications for product acceptance.
 
Job Number: 1731622
Job Location: Vancouver, WA
Rate: 39-49K annually
Duration: Direct Hire
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
This is a Program Quality Engineer (QE) position supporting USG Military Helicopter Program. This position required to support the AS9100 compliant First Article Inspection (FAI) requirement in Final Assembly. Individual will be generating Inspection Check Lists (ICL) and monitoring FAI execution to include monitoring overall ICL effort and maintenance of metrics.
Model based definition (CATIA) experience required.

Bachelors' Degree Manufacturing / Mechanical Engineering
 
Job Number: 156-2300
Job Location: Stratford, CT
Duration: 12-18 months
Input Date: 11/14/2020
Firm Name: RCM TECHNOLOGIES INC
Attention: Kelly Krupa
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
This position will support the USG Military Combat Rescue Helicopter Program (CRH). The QE will support the AS9100 compliant First Article Inspection (FAI) requirement in Final Assembly.

The individual will be generating Inspection Check Lists (ICL) and monitoring FAI execution to include monitoring overall ICL effort and maintenance of metrics.

Requirements
•Model based definition (CATIA) experience
•Bachelors' Degree in Manufacturing or Mechanical Engineering
 
Job Number: 1910097896
Job Location: Stratford, CT
Per Diem: split
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspection Technician (2nd Shift)

Description:
Quality Inspection Technician (2nd Shift)

Fort Worth, TX
$35.31/hr
1 year contract
Second Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEMS SPLIT*

Description:
Supports testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations.

This position is for a staff Quality Inspection technician who works under moderate supervision. Performs moderately complex product feature inspections. Establishes inspection and
testing specifications and procedures. Reviews inspection and test plans, technical reports, and data. Assists in orienting, training, and assigning the work of business support/technical employees. Uses a variety of measuring devices, testing equipment's, and statistical control processes. Inspects actual products on the floor and on-line. Raises notifications of non-conformance, quarantines non-conforming product and, when
approved to do so, provides disposition.

Basic Qualifications:
- Minimum of 3 years’ experience working in a relevant application.
- Experience with mechanical assemblies in a manufacturing environment.

Preferred Qualifications:
- Experience with Aerospace industry requirements.
- AS9100 knowledge.
- Demonstrated computer literacy.
 
Job Number: 10366
Job Location: Fort Worth, TX
Rate: 35.31
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - Aerospace - Anaheim CA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.
We have several clients in the Anaheim area and one of them is looking for an experienced Quality professional to perform some Quality Inspections of their aerospace products.
Summary Description:
1) Inspection to be performed at Placentia Facility
2) Service type – Final Inspection prior to shipment
a. Types of inspection – Envelope dimensions (standard inspection equipment is used and available on site), manual/ general function (opening and closing with no specialized test equipment), and workmanship (cosmetics for paint, plating, sealant application).
b. Customer approved inspection plans with acceptance criteria for each product is to be used.
c. Customer has stated that they may send one of their “experts” provide initial training.
3) Product Types – designed aerospace products provided to Airbus Defense and Space (ADS)
a. Includes four mechanical latch assemblies and one machined bolt.
4) Service period – December 2018 thru March 2019
a. Anticipate one to two inspection activities per week
b. Anticipate 2 hours of inspection time per visit
 
Job Number: Keltia QI
Job Location: Anaheim, CA
Rate: DOE
Per Diem: NA
Overtime: NA
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Vinicius
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. MANUFACTURING ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experience SR. Manufacturing Engineer for our Aerospace Client in Simi Valley, CA.


Brief Description

Successful candidate will implement lean process improvements in a precision machining environment that reduce process variation and improve productivity, as part of the Manufacturing Engineering team. This position is located in Simi Valley, CA.

Responsibilities:

Reduce scrap and non-conformances through training and improved process control
Improve sales OTD through training, set-up reduction, and process improvements
Recommend and implement new equipment, including process planning and CNC programming development.
Develop and modify manufacturing processes including process planning, process drawings using CATIA software, fixtures, cutting tools, gages, programs, special processes, assembly, and inspection
Participate in LEAN initiative and engage Six Sigma tools for process improvements
Assure that manufacturing engineering technical data is complete and accurately documented to provide an accurate technical/historical base for future reference that meet customer requirements

Qualifications:

BS Degree in Manufacturing, Mechanical, Aeronautical, Industrial, Materials Engineering
10+ years experience with most phases of prototype or small batch aerospace precision machining processes including:
Experience and knowledge of manufacturing processes and cutting tools
Fixture design
Experience and knowledge of in-process and final inspection tools and methods
Manufacturing Process Planning utilizing CATIA and MS NAV
Knowledge of special processes
Knowledge of quality management systems (AS9100)
Cost Estimating is preferred
Heat Treating and Metallurgical process knowledge
Plating and Coating process knowledge
Experience with CATIA, Microsoft Dynamics NAV, PC-DMIS is preferred
Experience with Lean, Six Sigma is preferred
Must be US Citizen or Permanent Resident Card Holder
 
Job Number: 368174
Job Location: Simi Valley, CA
Per Diem: If qualified
Overtime: Possible
Duration: 3 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. QUALITY ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experienced SR. Quality Engineer for our Aerospace Client in Simi Valley, CA.

Brief Description

Support Manufacturing, Manufacturing Engineering and Purchasing Departments in Quality related Issues, drive continuous improvement initiatives throughout the manufacturing and inspection processes both at PSI Bearings and at our suppliers. Responsible for implementation and analysis of technical products, processes, and systems. May develop a range of processes and recommends alterations to improve quality of products and/or processes. Works with minimum supervision, conferring with superior on unusual matters. May be assisted by Entry/Junior or Intermediate Level personnel.

Responsibilities:

AS9100 Rev D and ISO 10012 – Strong understanding and ability to apply specified requirements in a cost-effective approach.
Reviewing New Product Launch customer specifications to flow down new requirements to all functions and ensure in establishing compliance to customer requirements
Reviewing Customer Po’s to identify requirements and flow down new customer requirements to all functions.
Ability in navigating in customer portals.
Ability to communicate with customer and suppliers to resolve processes gap.
Ability to collect, compile and analyze data (using the appropriate six sigma methods and techniques); to determine both the actual root causes of identified problems and required corrective (preventive) actions to prevent recurrence.
Able to affect internal and external PPM (scrap and rework) reduction and OTD improvements both internally and at our suppliers (machining and special processing).
Knowledge of dimensional inspection measurement systems and their application for the inspection of complex products – full understanding of ASME Y14.5 (GD&T).
Implementing Control Plans and/ or SPC to reduce inspection processes.
Performing PPAP’s (Production part approval process).
Performing process capabilities analysis on key characteristics
Aid in the process of coordinating source inspection
Review and approve of customer and internal First Article inspections (AS9102)
Performing internal audit activities including but not limited to quality management systems, purchasing, contract review process, and manufacturing.
Drive trend improvements on the internal and external Quality in support of strategic business objectives.
Act as a liaison for the production areas on matters related to contract review process and first article inspection
Identifying GE SSL (Source Substantiation List) and submitting GE SSP (Significant Process Substantiation).
Performing internal and customer corrective actions.

Qualifications:

Bachelor’s degree, preferably in Mechanical, Manufacturing or Industrial Engineering.
Minimum of 10 years Quality Engineering experience w/ 5 years experience directing Quality Engineering activities in an aerospace manufacturing (machine shop) environment.
In-depth working knowledge of Six Sigma with the ability to effectively apply recognized methods and techniques in a manufacturing environment (Green Belt or higher).
Ability to promote and foster a Continuous Improvement culture both internally and with our supplier’s (machining and special processing).
Strong understanding of contract review process and First Article Inspections.
Effective communicator – strong written and verbal communication skills.
Strong understanding of DMAIC, FMEA, PPAP, Statistical Process Control (SPC), Gage R&R Studies and lean systems.
Effectively apply appropriate problem-solving and continuous improvement techniques.
Ability to determine the appropriate dispositions for nonconforming product; function as quality representative at both Preliminary Review (PR) and MRB levels.
Internal quality audits – participate in both Internal Quality Management System (QMS) audits and customer audits (product and system).
General understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments.
General understanding of subcontracted special processes (NDT, heat treating, shot peening, plating and surface treatments).
Strong understanding of AS9100 Rev. D.
Ability to create and process GE SPS (Significant Process Substantiation)
Will train and mentor lower level engineers.
Membership in ASQ – American Society for Quality
Proficiency in Minitab and excel
 
Job Number: 368587
Job Location: Simi Valley, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Engineer / Power supply design / FPGA NY

Description:
5828 Sr. Design Engineer
Number of openings: 4
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 70
Start Date: 02/04/2019
Tentative End Date: 02/03/2020

Job Description
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneurnatic components and systems that will become the new products. The incumbent plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Senior Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others.


A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the Division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Senior Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department or he/she might report directly to the Chief Engineer. The incumbent requires guidance on general assignment objectives and critical issues, but he/she is expected to make independent and unreviewed decisions on most technical matters. His/Her work is periodically reviewed for application of sound professional judgment as it applies to meeting overall program and company objectives.

The Senior Design Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent's operating as a part of a design team will be responsible for the physical hardware design. He/She must oversee the efforts of drafting personnel and Assembly & Test Technicians. In this role he/she must be an inspirational leader, a creative problem solver, and must be sensitive to feedback from team members to identify and resolve problems before the design is released to production.

In the early stages of a new program, the Senior Design Engineer will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations.

During the design and development phase the Senior Design Engineer will initiate and carry out any analyses necessary to ensure the integrity and conformance of the design. These will include stress analysis, fracture mechanics, thermal analysis, and producibility analyses. The incumbent is responsible for selecting the materials, fits, heat treatment and finishes used in the design. He/She must be familiar with the properties and characteristics of materials and processes used hardware, and with all standards and requirements pertinent to the Division's industry, such as Military, FAA, and NASA specifications.

The Senior Design Engineer is responsible for actively communicating with the involved Division personnel who will be manufacturing hardware. He/She must frequently communicate with Reliability, Environmental Test, and Test Equipment Designers to keep them current on design status and ensure compatibility with their activities. Frequent consultation during both the proposal and design phases with the Manufacturing and Product Engineering personnel is crucial. Often these groups must be motivated and persuaded to consider novel or unorthodox methods of manufacture and test in order to preserve the simplicity or integrity of the design. The incumbent also must be sensitive to the expertise of manufacturing personnel, responding to their suggestions when appropriate. A delicate balance must be struck to achieve high producibility and cost effective parts and assemblies that satisfy quality and performance goals. The Senior Design Engineer is expected to provide the leadership and cooperation to ensure this happens.

The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

This individual will represent a high level of design problem solving in the Company. He/She must often act as a technical consultant for other programs both in development and in production. The incumbent must be able to communicate fluently to audiences representing a wide variety of skills, background, and disciplines. Travel, sometimes frequent, will be required to communicate with customer engineering groups. The Senior Mechanical Design Engineer's primary responsibility is the mechanical design of often complex servornechanisms, while that of the Senior Electrical Design Engineer is the design of complex electronic control hardware. In both cases this includes working with the customer to understand and define the design constraints, helping to write a winning proposal, conceiving novel mechanical or electrical solutions, performing design analysis, developing hardware, providing accurate and proper documentation of the design, and designing for producibility. He/She must be prepared to sell the features of the design and its implementations to both the customer and the division personnel who will be manufacturing and supporting the design.

To achieve the position of Senior Design Engineer, an individual will have at least a BS degree in engineering with extensive experience in creating successful designs of electrohydraulic, electromechanical, mechanical and/or electropneurnatic servornechanisms and their control electronics. For a Senior Mechanical Design Engineer broad background in design analysis, including stress analysis, kinematics, strength of materials, fluid mechanics, and vibration is essential. Experience with closed loop systems, fluid power control, servornechanisms, fracture mechanics and Computer Aided Design is desirable. A Senior Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components. Most important is a proven record of accomplishments including successfully developed and produced designs and a demonstrated ability to participate in a product design team.

ACCOUNTABILITIES:

1. Develop new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume.

4. Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.

8. Consult on new product and market development efforts.

9. Maintain currency with materials technology, industry design requirements (Military, FAA, NASA, etc.), and modern design analysis tools.

10. When applicable supervise subordinate engineers and project/product engineering technicians.

Needs:
Space firmware experience
Power and mixed signal electrical design
Experience in high liability space – familiar with designing Rathard Application
Radiation hardware design
Experience with FPGA design hardware, Motor drives, signal conversion, lbdt rbdt
Understand 1553 RS-422
461 Mil standard understanding
BSEE with 10 years exp-
Cadence Allegro for design work
PC Board layout testing
Will need to test work, risk reduction
Familiar working with NASA / Commercial launch vehicle programs
Thrust vector control, election, launch and space vehicles
*astronauts program, satellite

Team player-will be on a large team
Power supply design DCD converters
 
Job Number: MB-5828
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintainability Engineer

Description:
Job Title: Senior Maintainability Engineer

Duration: 6 to 12 Month Contract Position

Location: Chula Vista, CA

Work Status: United States Citizen or Permanent Resident / Green Card Holder


Education: B.S. Degree Preferred in Aerospace, Mechanical, Civil Engineering or Structural Engineering.


Job Summary:

Provide maintainability engineering services in support of nacelle component design and substantiation.

Qualifications:
Must be able to perform each essential function and have education, skills and experience listed below.

Key Words In Resume - Maintainability / Engineer / Analysis / CATIA / Aerospace OR Aircraft.

Essential Functions & Responsibilities –

Plan, analyze and execute maintainability concepts for aircraft nacelle components and assemblies.

Document maintainability plans, concepts, and analyses in formal reports, present in program reviews.

Effectively use CATIA v5 in support of analysis and documentation of maintainability efforts.

MINIMUM Education and Experience
•Minimum of ABET approved Bachelor degree in aerospace, mechanical, civil or structural engineering. Masters preferred
•Minimum of 5 years’ experience in maintainability of aircraft components
•Must be a US citizen or green card holder

Preferred Experience and Interpersonal Skills
•Experience in design or maintainability of nacelle components and mechanisms preferred
•Experience in design or maintainability of engine build-up preferred
•Strong interpersonal skills and a very high degree of collaboration at all levels required
•Demonstrated ability to multitask with strong task orientation and attention to critical details required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Be a collaborative, cooperative, creative, insightful, high energy self-directed and thoughtful considerate team player
•Ability to work independently, be insightful, resourceful and innovative and willing to do whatever work is assigned

Required Computer Skills
•Expertise with CATIA v5 – MIN 6000 hrs
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook

Certificates, Licenses, Registrations: None Required Except Diploma for BENG Degree or higher in Mech, Aero, Civil, or Structural.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55556
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Solidworks Designer

Description:
Senior Designer
Location: Port Angeles, WA (98363)
6+ month contract with potential to convert fulltime

Job Description:
We are seeking a Sr. Solidworks Design Engineer to support aircraft general mechanical design (metals, fastener selection etc., ), fluid systems (manifolds, lines, etc.), plastics/composites, and electrical systems (wiring harnesses, routing, etc.) aircraft systems design team on various design, integration and release of Environmental and other control systems and installation drawings.

Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple products/programs. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups and internal partners. Reviews and assigns work to others. Works under minimal direction.

Required Skills:
•SolidWorks
•EPDM advanced level

Preferred Skills:
•Electrical and wire harness design understanding

Min years of experience:
10 years

Degree Requirements:
Bachelor's Degree
 
Job Number: 55061
Job Location: Port Angeles, WA
Rate: 65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3 / FEMAP / Nastran / no clearance CA

Description:
Structural Analysis Engineer 3 (Job Number: 18026724)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $54.00

Schedule: 9/80 A

Location: El Segundo, CA

Duration of assignment: Up to 1 year

Aerospace Systems located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 5 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 3 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1712
Job Location: El Segundo, CA
Rate: 54/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4 CA

Description:
163956
Structural Analysis Engineer 4 (Job Number: 18027073)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay Rate: $65 to $67/hr

Work Schedule: 9/80

Duration of Assignment: 1-31-20

Aerospace Systems client located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 9 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 7 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1707
Job Location: El Segundo, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Currently seeking a Structural Design Engineer (Wing or Fuselage) for a 12+ month contract. The ideal candidate will possess 5+ years of primary and secondary conceptual design experience with a focus in either wing, or fuselage design.

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cst and producability
• Working knowledge of composite executive aircraft construction including primary and secondary structure

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree - Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 5 years of primary and secondary Executive Aircraft structural design experience
• Experience with Catia V5
• Knowledge of Fibersim Is a plus


The Structures Company is an AA/EOE.
 
Job Number: 212
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer

Description:
Location: Cape Canaveral, FL
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description / Responsibilities:
- Produce moderately-complex technical designs for civil / architectural / structural and some mechanical modifications to new and existing facility related systems in support of company Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida.
- Provides CAD and project support for the construction of new and refurbishment of existing system elements as part of the company Engineering and Infrastructure Team.
- Requires extensive knowledge of civil, structural, architectural and mechanical drafting practices and sound knowledge of engineering design principles, practices, and industry standards.
- Candidate must have a wide and comprehensive acquaintance with and understanding of, both the technical phases of designing and fabricating industrial facilities, structures, personnel access support equipment and facility platform systems.
- Develops basic data and makes preliminary layouts, sketches, and notes necessary to present for design proposal then maturing to final design.
- Investigate pertinent design factors such as structural member allowable stresses, ease of fabrication, availability of materials and equipment, interchangeability and cost.
- Derive requirements, incorporating innovations and options to reach project objectives within schedule and budget.
- Provides engineering support for short and long term infrastructure planning and capital improvement construction projects and maintenance operations.
- Coordinates with other organizations affected by the design development.
- Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
- Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
- Responsible for the generating Statement of Work implementation documentation used to direct subcontractors for fabrication and construction efforts. Work also in support of fabrication and construction phases, coordinating schedules and managing submittals and requests for information.


Educational and Professional Qualifications:
- The successful candidate should have at least (10) years of relevant design experience in building and/or modifying heavy industrial facilities, support equipment and access structures.
- Also, he/she should have at least (10) years of Autodesk AutoCAD, (3) years minimum experience using 3D BIM AutoDesk Revit modeling.
- Shall have experience with CAD file conversion, hardware configuration, and drawing database management.
- Candidates may need to demonstrate design and CAD proficiency skills during interview process.
- Degree not required.
- Must have relevant designer role experience with expert level CAD skills.
 
Job Number: 10431
Job Location: Cape Canaveral, FL
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer - Stress Analyst 5 FL

Description:
163977
Structural Engineer - Stress Analyst 5 (Job Number: 19001526)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 11, 2019

Target End Date: Sep 6, 2019

Rate: $80 to $83/hr

Location: Melbourne, FL.

Work Schedule: 9/80

Duration: 6 months

Perform fatigue and detailed stress analysis of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program. Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives. The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. Tools utilized may include FEMAP, NX,Teamcenter and other software applications.

Basic Qualifications:

Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis; 12 years of experience with a Masters Degree.


Preferred Qualifications:

Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions
 
Job Number: MB-1721
Job Location: Melbourne, FL
Rate: 80-83/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Room Attendants

Description:
STS Technical Services is hiring Supply Room Attendants in Atlanta, Georgia!

Job Summary:

The Supply Attendant is responsible for warehousing and distribution of aircraft parts and related materials within logistics operation. Duties include, but are not limited to: data accuracy, compliance processes, packaging preservation, proper binning, issuing, receiving and shipping of material managed in the stores operation. Further responsibilities include, but are not limited to: responsible for safe operation of mechanical and manual material handling equipment; responsible for safe operation of company vehicle.

Qualifications You'll Need To Have:

Must have a valid driver's license
Should possess the ability to meet deadlines with high productivity and accuracy
Prefer minimum 6 months experience in warehousing and logistics, exposure to inventory management systems highly preferred
Full cycle - shipping/receiving, reviewing, comfortable matching drawings/numbers against FAA documentation
Must be a team player with focus on customer service. Must be able to work a flexible schedule including weekends and holidays
Must be willing to work rotating shifts and weekends
Additionally, candidate must be able to read and write English and have some working knowledge of personal computers
Must be able to work well with others
Must be able to work in a safe manner and be able to lift up to 80 lbs utilizing proper equipment or assistance
Must be performing satisfactorily in present position

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45671
Job Location: Atlanta, GA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer - Bleed Air

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Must have experience with system layout/conceptual design of aircraft bleed air systems during conceptual/preliminary design phase Aircraft experience
• Prepare 3D installation and detail models of the BAS and VCS.
• Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science - Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.


The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer - Mid-Level

Description:
General Summary:
This position is for a mid-level engineer reporting directly to the Section Chief of System Design Assurance. The engineer will be responsible for compiling system safety assessments on various airplane systems.


Duties and Responsibilities:
Primary tasks include performing Functional Hazard Assessment (FHA), System Safety Assessment (SSA) and Particular Risk Assessment (PRA) to support all stages of aircraft development. Secondary tasks include review and support of supplier FMEAs, compilation of safety documents, supplier coordination, and inter-departmental coordination.


Knowledge, Skills and Abilities:
• Working aircraft and system safety assessments in accordance with SAE ARP 4761
• Capable of handling complex individual work assignments
• Possess excellent coordination skills, and must work well in a multi-functional team environment
• Familiarity with requirements of 14CFRPart 23 and EASA CS23 is required. Experience with both mechanical and electrical/avionics systems is preferred


A strong background and demonstrated ability is required in the following areas:
o Conduct of SAE ARP4761 programs
o Performance of Reliability Predictions, FMEAs, FTAs, CCAs, and maintenance task identification for continued airworthiness
o Compilation of System Safety Analyses
o Supplier interface, coordination, and task management
o Must be familiar with Microsoft Office suite (Word, Excel, Project, PowerPoint). Must be conversant with RM&S analyses tools e.g. PTC Windchill, Isograph Reliability Workbench, CAFTA
o Familiarity with requirements management tools (DOORS), PLM tools (TeamCenter etc.) and SAP is desired

The Structures Company is an AA/EOE.
 
Job Number: 269
Job Location: NC
Per Diem: $65/Hr
Duration: 10+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Per Diem Split: No


****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****


Job Description:
- Our client is one of the world's largest suppliers of technologically advanced aerospace and defense products.
- The ISR & Space Systems business unit provides products and services to global government and commercial markets that enable mission success in the harshest environments in space, in the air, at sea, and on the ground.
- They design and manufacture Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) on a number of space & sea platforms including the International Space Station, the U.S. space suit, and the next generation of space vehicles such as CST-100 and Orion, and the US Navy’s submarine fleet.
- Our client is looking for an enthusiastic and highly motivated individual to join them as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.


Responsibilities include:
System development trade studies and optimization, development of concepts of operations, developing product requirements at the system/component level for mechanical/electrical/software, thermal/fluid/chemical system modeling, steady state & transient performance analyses, as well as component sizing.


Education / Certifications:
- Bachelors in Mechanical/Aerospace/Chemical/Systems Engineering with 5-25 years of experience


Basic Qualifications:
- Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
- Ability to work well both independently and within an integrated product development (IPD) team environment
- Excellent attention to detail
- Excellent writing & math skills
- Must be a US Person


Preferred Qualifications
- Experience performing thermal/fluid/chemical analyses
- Experience on hardware development program: proposal / development / manufacture / verification / operational support
- Experience performing system development/integration/architecting
- Experience deriving & writing requirements for development hardware (DOORS)
- Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 10341
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician Level - 1 MA

Description:
Requirement#
STTTM-REQ-0391
Work Location
Cambridge, MA (61 Moulton Street)
Work Week
9/80-A
Priority
High
Needed Date
02/01/2019
End Date
01/31/2020
Number of Resources
1
Security Clearance
No clearance

Title
Technician Level - 1

Description
Able to install, repair, & maintain various electronic and mechanical devices.

Mandatory
• An Associate degree in a scientific field with 3 yrs lab/industrial experience or High School diploma with minimum of 5 yrs lab/industrial experience.
• A basic understanding of chemistry and materials properties preferably in polymer membrane
• Hands-on in analytical techniques/instrumentation, and computer driven data collection and basic analysis.
• Experience in quantitative analytical chemistry techniques such as ICP, UV-VIS, conductivity, thermal and mechanical testing.
• The ability to use and handle gas cylinder and hand tools such as wrenches, voltmeter, pipettes, pumps, and other basic lab equipment.
• The ability to follow schematics, troubleshooting issues, and implement repair strategies.
• Solid communications skills (both verbal and in writing) are required.
Desired
• Experience (4+ years) in carrying out repetitive, high through put analytical testing to support the development and commercialization of the targeted product.


• Experience working in a materials testing lab following procedures, ability to write SOP’s and maintaining analytical instruments and equipment to quality standards.


• Experience in developing processes to validate analytical chemistry methods that support product specification.


• An interest in renewable energy technologies and a desire to learn more about the field.


Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
industrial experience 0-3 Years Yes

Min Pay Rate
25.00 USD
Max Pay Rate
35.00 USD
OT Allowed
Yes (OT Limitation: No)
Travel
No
Non-Exempt
Rate Type
Per Hour
 
Job Number: JE-0391
Job Location: Cambridge, MA
Rate: 25-35/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Interim Clearance Sufficient

Experience designing test equipment and modifying test software using NI LabVIEW/TestStand CVI or C+ from Test Requirements for electro-optical and electro-mechanical systems for acceptance testing by test operators.
Experience working in a lab and factory environment.
Ability to read specifications and/or statements of work and design test systems
Ability to design in collaboration with internal and external manufacturing and support functions.
 
Job Number: 45948
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer CA

Description:
163973 Test Engineer

Work Site Address: Torrance, CA 90501
Job Number: 5833
Max Pay Rate: 45.00

Start Date: ASAP
End Date: 6 Months with possibility of CTH
Position Type: Contract

The Test Engineer/Conductor is responsible for performing the tests of assigned programs as well as engineering solutions to testing issues. As a Test Conductor, the incumbent will set up and perform tests, measure and record test data, and review, and analyze test results. As a Test Engineer, the incumbent will support the Senior Test Engineer in troubleshooting and resolving testing problems.

The Test Engineer/Conductor will be responsible for performing and overseeing electrical, mechanical, functional tests. This will involve manual set up of test, actual performance and monitoring of test, manual and automated measuring and recording of test data, and computer assisted analysis of the test results. Therefore the incumbent should be comfortable with hands-on type of work, have high attention to detail, and be proficient with the computer and MS Office tools. The incumbent will learn to operate motors and motor drivers, use various electronic measurement devices, and generate a variety of mechanical test setups from written procedures.

The Test Engineer/Conductor will also be responsible in supporting various engineering tasks. This will involve researching and defining test parameters and methods and preparing and utilizing various post processing scripts for data analysis. It will also involve reviewing and verifying test results, troubleshooting and fact-finding test discrepancies, updating or modifying work instructions, and maintaining test schedule. Therefore the incumbent should have excellent communication, organizational skills, and good analytical skills. The incumbent should also be a quick learner, self-motivated, work well in a team environment, multi-task, and take ownership of a task with minimal supervision.

Roles and Responsibilities
In all phases of the job, the Test Engineer/Conductor's tasks are governed by technical, cost, and schedule requirements and the incumbent must be able to work under pressure with minimum error and maximum efficiency. In rare cases, the incumbent must be flexible enough to perform some tasks out of the scope of this position in order to fulfill certain test requirements, under the direction of the Senior Test Engineer.

1. Setting up and performing tests; measuring, recording, and analyzing test data with minimum error and maximum efficiency.
2. Troubleshooting to resolve test discrepancies.

Qualifications and Education Requirements
1. B.S. in engineering or related field.
2. Knowledge of MS Office tools
3. Technical writing and communication skills.
4. Good interpersonal relationship skills (communication, attitude, teamwork, flexible) a must.
5. Knowledge and/or experience with strength testing and report writing.
 
Job Number: MB-5833
Job Location: Torrance, CA
Rate: 45/hr max
Per Diem: no
Duration: 6 months CTH possible
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II / hydraulic experience, technical writing, aerospace URGENT CA

Description:
162671 Engineer II (Test Engineer)

Work Site Address: Irvine, CA 92618
Job Number: 6251
Max Pay Rate: 55/hr
Start Date: ASAP
End Date: 6 months
Position Type: Contract

Manager is also asking for Catia & GD&T experience.

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

Qualifications and Education Requirements
1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.
3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.
4. General knowledge of other related engineering and technical areas.
5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


Need Test Engineer with:
Report writing/reviewing
Good engineering judgement
Hydraulic experience
Technical writing and aerospace experience preferred
Good verbal and written communication skills
Catia & GD&T

Engineering degree.
 
Job Number: JK-6251
Job Location: Irvine, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician Level - 2 MA

Description:
Requirement#
STTTM-REQ-0392
Work Location
Cambridge, MA (61 Moulton St, Cambridge, MA 02138)
Work Week
9/80-A
Priority
High
Needed Date
02/04/2019
End Date
02/03/2020
Number of Resources
1
Security Clearance
No clearance

Title
Test Technician Level - 2
Description

Lockheed Martin Energy Storage is commercializing a new class of flow battery technology for low-cost grid-scale energy storage based on novel battery chemistry comprising aqueous electrolyte solutions. We are seeking a hands-on technical support personnel to assist with material testing and analytical characterization of polymer membranes, electrodes and electrolytes in support of developing new battery products. Typical characterization will include but not limiting to ICP, UV-VIS, conductivity, thermal and mechanical testing. The successful candidate will work closely with a team of technical staff in support of achieving overall project goals. The ideal candidate will be self-motivated and possess a strong attention to detail. Candidates should have some laboratory-type experience from chemical/pharmaceutical/bioscience industry, familiarly with documentation, and be comfortable in handling analytical instrumentation, following calibration procedures, and using computer-operated devices and systems. A desire for learning is critical and strongly encouraged in this complex environment. This position is located in Cambridge, MA Basic Qualifications
• An Associate degree in a scientific field with 3 yrs lab/industrial experience or High School diploma with minimum of 5 yrs lab/industrial experience.
• A basic understanding of chemistry and materials properties preferably in polymer membrane
• Hands-on in analytical techniques/instrumentation, and computer driven data collection and basic analysis.
• Experience in quantitative analytical chemistry techniques such as ICP, UV-VIS, conductivity, thermal and mechanical testing.
• The ability to use and handle gas cylinder and hand tools such as wrenches, voltmeter, pipettes, pumps, and other basic lab equipment.
• The ability to follow schematics, troubleshooting issues, and implement repair strategies.
• Solid communications skills (both verbal and in writing) are required.

Skill/Experience/Education
Mandatory
Basic Qualifications
• An Associate degree in a scientific field with 3 yrs lab/industrial experience or High School diploma with minimum of 5 yrs lab/industrial experience.
• A basic understanding of chemistry and materials properties preferably in polymer membrane
• Hands-on in analytical techniques/instrumentation, and computer driven data collection and basic analysis.
• Experience in quantitative analytical chemistry techniques such as ICP, UV-VIS, conductivity, thermal and mechanical testing.
• The ability to use and handle gas cylinder and hand tools such as wrenches, voltmeter, pipettes, pumps, and other basic lab equipment.
• The ability to follow schematics, troubleshooting issues, and implement repair strategies.
• Solid communications skills (both verbal and in writing) are required.
Desired
• Experience (4+ years) in carrying out repetitive, high through put analytical testing to support the development and commercialization of the targeted product.
• Experience working in a materials testing lab following procedures, ability to write SOP’s and maintaining analytical instruments and equipment to quality standards.
• Experience in developing processes to validate analytical chemistry methods that support product specification.
• An interest in renewable energy technologies and a desire to learn more about the field.


Interview Required
Yes
Min Pay Rate
25.00 USD
Max Pay Rate
35.00 USD
Shift
1st Shift
OT Allowed
No
Travel
No
Non-Exempt
Rate Type
Per Hour
 
Job Number: JE-0392
Job Location: Cambridge, MA
Rate: 25-35/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Aviation Aerospace experience required - Clearance CA

Description:
164027
1346-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 2/19/2019
End Date: 2/14/2020

Job Description:
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Utilizing Manufacturing Engineering skills to develop and solve complex issues. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems. May use CAD/CAM to design tools. Will accept level 2 and 3 experience.


Aviation Aerospace experience required.
Mechanical Engineering experience acceptable and
Manufacturing Engineering experience acceptable

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $56.91 Hourly
 
Job Number: JE-1346-1S5
Job Location: Palmdale, CA
Rate: 56.91/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-309
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineers

Description:
STS Technical Services is currently hiring Tool Design Engineers for open positions in Greensboro, North Carolina.

Job Summary:

The Tooling Engineer is responsible for clarity, standard conformity, interface compatibility, dimensional accuracy, and ease of manufacturing for all checking layouts and drawings, including advising management of potential tooling issues.

Job Duties:

Checks completed layouts and drawings for: clarity, completeness, conformity to standards, procedures specification, critical interface compatibility, productivity aspects, dimensional accuracy of calculations and geometric tolerancing
Investigates design factors such as ease of manufacturing, availability of materials and equipment, interchangeability; replaceability, strength – weight efficiency.
Examines designs for proper application of geometric dimensioning and tolerancing (GD&T), conducts analysis of tolerances to ensure correct assembly fits.
Advises the Manager/Supervisor of Tool Engineering regarding all tooling related matters of significance which impact, or have potential to impact, the Manufacturing responsibility
Recommends changes to existing tool designs related to cost reduction or obsolescence
Detail drawing generation may be required
Perform other related duties as assigned

Qualifications:

B.S.M.E. degree in Mechanical engineering or related field strongly preferred.
Minimum of 5 year’s aerospace (tooling) Industry experience preferred.
Formal GD&T training required.
Expert experience and proficiency with CATIA V5.
Knowledge, Skills and Abilities:
Broad knowledge of aerospace tooling and fabrication processes
Strong Knowledge in the use of GD&T per ASME Y 14.5 Standard
Strong oral and written communications skills.
Working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes)
Experience working in SAP and TcE strongly preferred
Thorough understanding of blueprint reading
Prior drawing generating and checking experience is preferred
Ability to multitask and a strong work ethic is a must
Excellent interpersonal skills
Excellent problem solving skills based upon sound technical reasoning
The employee will be expected to acquire an expert knowledge of HACI Tooling Design Standards and Processes

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43040
Job Location: Greensboro, NC
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / NX10 required CA

Description:
163967/5831 Tool Designer
Number of openings: 1

Position location: Torrance - CA
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: Associate’s Degree
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 40
Start Date: 01/28/2019
Tentative End Date: 01/28/2020


Job Description
Function:
Under the general direction of the Manufacturing Engineering Group Leader or Manufacturing Project Engineer, designs (layout and detailing) tooling, jigs and fixtures, gauges, and test equipment for the most economical production and test of Moog products. Maintains contact with the Tool Room, Method Engineers, outside vendors and operating departments regarding the ability to manufacture and use of items designed.

Essential job functions:
This position is concerned with the design of tools, jigs, fixtures, and gauges which are used to manufacture and test items produced by Moog. Most items are requested by Methods Engineers, however, requests also come from other engineering areas when items are needed for prototype, assembly, test, or in development of Moog products. The incumbent frequently must obtain additional information from all available sources to effectively accomplish the design. On major projects, the requesting party frequently performs design calculations and functionally checks the results. On all designs, the incumbent is expected to check his own work dimensionally. Layouts may be approved by the supervisor as required before detailing.

The incumbent is expected to work closely with the methods engineers, tool room employees and supervisors where the items designed are made and used. The incumbents effectiveness is measured by the amount of changes required and trouble experienced in building the item; the comments of the toolmaker, inspector, and user; and the ability of the item to perform its function.

ACCOUNTABILITIES:

1. Designs, lays out, details and checks (dimensionally) tooling and gauges assigned by the
supervisor.
2. Follows up on the manufacture of items designed and their ability to perform as intended.
3. Works with Method Engineers, Supervision, Metrology and users to assure optimum design.
4. Makes recommendations for changes in part drawings to improve manufacturing and/or
performance.
5. Assure the acceptance and practice of fundamental safety principles by employees and management.
6. Develops standard tool designs for expediency.
7. Utilizes new graphics systems to streamline tool design tasks.
Required skills: In order to perform this position, the incumbent must have a working knowledge of precision machine shop practices; cutting tools, jig and fixture construction, gauging practices and assembly and testing practice. This normally would be a result of two years' technical school training (or equivalent experience), tool and diemaking or machine shop experience, and at least 5 years tool design experience. A knowledge in gear manufacturing and mechanical actuation is desirable.

As a result of the incumbent's duties and contacts, one should have the ability to get along with many people. It is also expected that in performing this job, one will make recommendations for improvement on part drawings and manufacturing techniques. Since much of this work is not directly supervised, the incumbent expected to keep the supervisor informed of all activities.
Scope:

Education:
Associates Degree or 2 years' technical school training

Other Requirements

Has to be currently doing tool designs.

Five year minimum in tool designs, for Aerospace/Mechanical applications.

No Design Engineering candidates, only Tool designers.

Incumbant has to be using NX10 and Teamcenter . Unfortunately client cannot afford the time to train in NX10.
 
Job Number: MB-5831
Job Location: Torrance, CA
Rate: 40/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer ( Clearfield , Utah ) 8853608

Description:
Tooling Engineer ( Clearfield , Utah ) 8853608
12 Month Contract

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment, at the Clearfield, Utah location:

Responsibilities:
• Concept and design of special tooling within an Integrated Product Team structure
• Project management of vendor and CAD resources for design and fabrication of individual rocket motor and aircraft tools
• Use and/or manages Computer Aided Design (CAD) resources for tooling design
• Work with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proof tooling upon receipt
• Maintain tooling documentation related to design, fabrication and proofing
• Provide engineering disposition of damaged and discrepant tooling and oversee return to production
• Provides tooling estimates for new tools

Education and Experience Requirements:
• BS in Mechanical, Civil or Aerospace Engineering, or related field plus a minimum of internship experience.

Screening Criteria:
• Experience with design of mechanical and structural elements
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts preferred
• Experience with general metallic fabrication including welding, machining, and forming.
• Understanding of 3D CAD systems (CATIA V5, NX) preferred
 
Job Number: 8853608
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Back to Advanced Job Search