Job Search Results

610 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 11:49PM Pacific Time by ContractJobHunter. )

Listings 1 - 610

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Melbourne, Florida!

Job Summary:
Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Essential Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions
Consults the Maintenance Lead if technical assistance is needed during the repair process
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer
Completes work package documentation by signing/stamping after finishing all designated operations
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness
Provides supervisor with performance statistics and other operational data, as requested
Properly accounts for time and materials used in all inspection and maintenance activities
Qualifications:
High School/GED
A&P and structures experience a plus
A&P License; zero to two years’ experience with aircraft/general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft
Over one year actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools
Assignments require Minimal Knowledge beyond the assigned work
Demonstrates correct understanding of routine aspects of work
Knowledge of machines and tools, including their uses, repairs and maintenance
Knowledge of principles and processes for providing customer service
Skilled with repairing, troubleshooting, installing and equipment maintenance
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48152
Job Location: Melbourne, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JEG -1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.



The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Hydraulics / Pneudraulics Maintenance / wheels and tires SC

Description:
1886-1 Hydraulics/Pneudraulics
Work Location: Greenville, SC
Status: Open

This position requires AIRCRAFT Hydraulics maintenance experience.

Qty: 1
Desired Start Date: 8/16/2019
End Date: 1/4/2020

Job Description:
The hiring manager is looking for people that have knowledge and understanding of the basic operations of aircraft hydraulics. This position will not necessarily be doing hydraulic operations 24/7 but will instead spend most of the time (not all) manufacturing hydraulic and oxygen lines, tear down and build up of wheels and tires, hydraulic fuel sampling, and working on hydraulic support equipment used on aircraft.

Aircraft Hydraulics maintenance. Performs test and checkout of mechanical, electrical, propulsion, structural, hydraulic subsystems and complete systems located at field locations away from primary company operations. Verifies and corrects such things as welds, sheet metal assemblies, controls, alignment of equipment.

Fabricates Fluid lines and Cables
Build up of wheels and tires
Performs Test Bench Checkouts and Testing
Hydraulic Fluid Sampling

Contractor must be willing to learn and be trained.
Hydraulic experience is required


Pay Rate: $25.00 - $29.00 Hourly

Skills Required
Areas of Expertise Hydraulics Yes 1 2 - 4 Years
Areas of Expertise Wheels No 2 < 1 Year
 
Job Number: JE-1886-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches.
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


The Structures Company is an AA/EOE.
 
Job Number: 322
Job Location: NC
Rate: $52-$60/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer

Description:




Applications Engineer



Location: Saginaw, Michigan



SCHEDULE
:

7:00 AM – 4:00PM 



SUPERVISOR:

Engineering Manager

Summary

 The Applications Engineer will be accountable to evaluate customer requests and site drawings, to ensure fit and function of our product. An application engineer will provide in-depth technical knowledge for all of our products in pre-sales and post-sales roles. You will provide sales drawings in Solid Edge Works and provide review of specifications specs to support the sales estimating and bidding processes. You will be a part of the product team and oversee equipment designs for fit and function. You will collaborate with R&D when new products are to be transferred in to production to ensure that our standards are kept and captured for reference. As a subject matter expert (SME) you will be a resource to the designers to transfer your knowledge in a way that will forward their ability to handle jobs accurately and efficiently. You will communicate with our customers and manufacture's representatives to ensure that we have whole and complete information. While communicating with outside sources, you will represent our company in a positive light only disclosing product and company data as appropriate for sales. You may be called upon to train our personnel as needed. Occasional travel, (up to 20%), may be required to visit sites, measure and ensure a fit for the customer and DC. You will be accountable to meet the product group standards, as assigned by the Engineering Manager. 



Essential Functions:

  • Listen to the needs of our customers and apply the correct equipment that will meet their needs.

  • Understanding of Wastewater, Storm water processes and various industrial processes.

  • Accountable for timely, detailed review of customer specifications to accurately support sales in bidding projects. Applying our application protocols, while assessing the needs of the project and coordinating information with other subject matter experts internally.

  • Exceptional customer service through professional, timely and accurate design support, communications etc.

  • Ensure our design standards are kept in tact through all phases of our projects.

  • As a subject matter expert (SME) you will be required to problem solve, learn new concepts and contribute sound application engineering to the company's products and processes.

  • Sales drawings turned around in 2-5 days (as required to support Sales), all drawings are to be delivered on time, consistent to DC standards, within budgeted hours and customer requirements.

  • Attend handoff meetings at receipt of PO and release to engineering; must support project application prior to submittal release as required to meet customer/DC Schedules.

  • Capture lessons learned with the product team, assess and implement changes/updates as needed into the application process and integrate this knowledge in to sales project management processes.

  •  Applications Engineer will ensure accuracy of engineering protocols, documented procedures.

  • Shall have in-depth knowledge of pricing, labor, alternative materials, marketing objectives & sales process.

  • Will follow all standards/processes as designated by company's QC, ERP and other process controls.

  •  Accountable for whole and complete product (fit and function) from proposal to post-sales.

  •  Due to the amount of interactions between customers and our internal teams; this position requires you to work in the office environment.




Education:



Bachelor Degree preffered  but not required.



College degree in Mechanical Engineering, Engineering Technology or Architectural Technology is strongly preferred or equivalent experience considered. .



Experience Required:


  • Required: Engineering of mechanical equipment 3 years or Architectural/Construction engineering 8 years 

  • Required: Computer Experience & Proficiency: MS Office programs, such as Outlook, Word and Excel


Required:


  • Proficiency in Solid Works or Solid Edge along, able to understand and translate mechanical blueprints.

  • Exposure to machinery design and mechanical concepts. Proven experience in resolving mechanical engineering production issues for equipment.


 Skills:


  •  Able to understand and create drawings (mechanical and civil) to industry standards.

  • Meticulous attention to detail, able to multi-task well and complete projects on time, within budget, to the customer's satisfaction.

  • Must have excellent customer and people skills: should be able to represent the company's image (consistent with the business motto of "you'll like working with us!”)

  • Must be self-initiating, independent, and able to organize time and diverse responsibilities.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33344
Job Location: Saginaw, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-12 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Technician

Description:
We have an Excellent Contract position for an Assembly Technician to join a leading Company located in Broken Arrow, OK
** Candidate must be able to obtain and maintain a DoD Secret Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Our customer leading supplier of integrated electromechanical assemblies to commercial and military prime contractors. The company designs equipment to meet client specifications and manufactures high-precision components to produce high-quality assemblies. Products include special purpose instruments, maritime vessel control panels, power supply and distribution assemblies, and surface vehicle and power generating plant control assemblies.

Major Responsibilities:
• Performs a variety of tasks in production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
• Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
• Makes continuity checks on work in process and completed.
• May conduct quality inspections on processing line in accordance with quality specifications.
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
Basic Hiring Criteria:
• A minimum of a High School Diploma or equivalent is required for this position.
• A minimum 3 years verifiable experience with hand tools and measuring equipment is required for this position.
• A minimum 3 years verifiable experience in reading and understanding blueprints, electronic schematics, wire lists and work instructions is required for this position.
Desired Qualifications:
• Secondary education in a technical school preferred.
• Must have strong mechanical abilities.
• Work history with mechanical assemblies.
 
Job Number: 37932
Job Location: Broken Arrow, OK
Rate: 20.00
Duration: Temp to Hire
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

Description:
165856
Avionic Technician
Greenville,SC 29605
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


Qty 3 openings
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG -1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician / Avionics modification experience / URGENT URGENT SC

Description:
166011 Job Title: Avionics Technician

Work Site Address: Greenville, SC 29605
Job Number: 1968-1
Max Pay Rate: $29.00/hr
Start Date: 9/2/2019
End Date: 12/19/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qty 3 positions needed
The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

Areas of Expertise P-3 No 3 4 - 6 Years
Technical Skills Electrical Testing No 2 4 - 6 Years
Technical Skills Read Electrical Schematics No 1 4 - 6 Years
 
Job Number: JEG -1968-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
A Controls Engineer with at least 3 years' experience is required for building/programming of automation systems. The ideal candidate has experience in a Manufacturing environment with specific experience in the following areas:

  • Programming of motion controls, ladder logic, Visual Basic and HMI's.

  • Engineer control systems used in high performance machines.

  • Supervise initial installation and optimization of machinery ensuring maximum production potential.

  • Administer maintenance and modifications of existing PLC programs.

  • Efficiently manage multiple projects and processes across a large scope of work, simultaneously gauging task priority.

  • SQL database storage of captured inspection or manufacturing data






This individual will work with other members of the Engineering department and other groups to ensure that labor and material budgets as well as scheduled delivery dates are adhered to or improved upon. Will work with customers, project managers, designers, toolmakers and electricians to solve problems in order to provide the customer with a complete, functional automation system. Will provide thorough testing of machine functionality to verify software program completeness and provide accurate documentation for each project. Will also advise customer on solving technical problems and provide customer with training specific to their current project (i.e. machine operation, programming principles and program structure).

REQUIREMENTS:

  • Understanding of robotics, control systems and machine operation with hands-on experience.

  • Design electrical controls for electro-mechanical systems.

  • Must be able to spec components

  • Select, test and integrate hardware and software components such as robots, analog devices, motion controllers, sensors, vision systems and lasers.

  • Broad range of PLC experience/Ladder Logic programming skills

  • Electrical schematics (read and develop)




  • A self-starter with the ability to work alone or as part of a team in a fast paced environment with minimal supervision.

  • VisualBasic or .Net developer skills






The following skills will be considered a plus:

  • Some travel to customer sites as required for buy-offs, maintenance/repair

  • Autocad and SolidWorks software experience

  • Physically wire systems as designed

  • More than 5 years' experience

  • Familiar with NFPA, UL 508, NEC codes

  • An understanding of Pneumatic controls

  • Familiar with Allen Bradley PLC


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35160
Job Location: Mesa, AZ
Rate: 90000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-09-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DRAFTING SUPPORT

Description:
Role: Drafting Support
Location: Vandenberg AFB, CA
Duration: 6+ months’ contract

Qualifications:
• Work duties will include creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
• Performing walk downs of projects to verify details will be required. Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital.
• Perform configuration management and drawing release functions.
Basic Qualifications:
• A minimum of 5 years of professional drafting experience.
• Experience with drafting electrical, mechanical and structural designs.
• Experience working independently and in a team environment.
• Proficient knowledge in Microsoft Office Suite.
• The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
• Have mastery of AutoCAD drawing program.
• Ability to read and interpret mechanical and electrical drawings and logic diagrams
 
Job Number: 19-04583
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:

Electrical/Controls Engineer



Our Client is searching for an Electrical/Controls Engineer who wish to advance their career in the aerospace and/or power generation field. Reporting to the Engineering Supervisor, the primary focus of this addition to the Engineering Department is to analyze, control, modify, and execute programs in CNC Machine Controllers. The Electrical/Controls Engineer will also assist and/or define electronic control requirements of CNC equipment as well as plan and provide for control of programming to prevent accidental loss (i.e. power outage) and provide protection of data. Additionally, the person in this role will perform and assist in interfacing all machine/equipment upgrades or additions. Our client offers competitive wages and a full benefit package which includes medical (both a PPO plan and a high deductible plan), dental, vision, life insurance (both company provided and optional purchase by the employee), short and long-term disability, 9 paid holidays per year, paid vacation time and the chance to contribute to the 401K plan which has a $0.50 match for every dollar you contribute up to the first 6%. On top of all that, our client offers a clean and climate controlled environment to work in.



Essential Duties and Tasks:

Analyze , control, modify and execute programs in CNC Machine Controllers.

Fanuc CNC integration, repair and maintenance.

PLC, ladder logic, servo systems, variable frequency drive, digital and analog systems.

Utilize 2D and 3D computer graphics with some proficiency.

Perform diagnostic and follow-up maintenance on electronic equipment including, but not limited to PLC, robotic, and CNC controllers.

Define electronic control requirements of CNC equipment.

Provide advice to internal personnel on any equipment and tooling designs requiring electrical/electronic interface.

Coordinate electronic CNC controller programming with information systems.

Assist and support install of all new equipment.

Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment.



Qualifications, Education and Experience:



BS or AS in Electrical Engineering or 3+ years of experience building electrical devices and controls for machines used in manufacturing.

Ability to read machine electrical schematics of machines and electronics.

2D CAD experience for electrical schematics; AutoCAD and 3D CAD experience desired.

Knowledge of Ethernet wiring, basic network configuration and networking concepts.

Experience programming manufacturing machines (CNC, ladder, object-oriented programming).

Experience troubleshooting electrical, mechanical and/or computers.

Experience working with hands/hand tools to build and repair mechanical and electrical devices for machine troubleshooting and repair.

Fanuc CNC experience a plus.

Ability to perform multiple tasks simultaneously.

Strong electronic and machine language programming skills.

Demonstrated ability to influence others positively in order to achieve positive work results.

Ability to communicate effectively at all levels with external and internal customers.

Ability to effectively work with skilled trades on various aspects of building CNC machinery.

Strong problem-solving skills with creativity and tenacity.

Occasional travel.



Always take ownership and be accountable for your actions. This job description is a tool to be followed. Other job duties my be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. Good and reliable attendance, positive attitude, and always take ownership of your job and team.



EEO Statement:



Our client provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability status, or any other classification protected by state, federal, or local laws. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of the characteristics. Discrimination of any type will not be tolerated.



Experience:




  • Electrical Engineering: 1 year (Preferred)

  • CNC machining: 1 year (Preferred)



Education:




  • Bachelor's (Preferred)



Benefits:




  • Health insurance

  • Dental insurance

  • Vision insurance

  • Retirement plan

  • Paid time off



This Company Describes Its Culture as:




  • Stable -- traditional, stable, strong processes

  • People-oriented -- supportive and fairness-focused

  • Team-oriented -- cooperative and collaborative



Schedule:




  • Monday to Friday

  • Day shift

  • 8 hour shift


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-34669
Job Location: Mason, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-02 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Mary Beth Principe
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 6 Months

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross- functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127- 1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real- world work experience.
- 2- 6 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high-pressure gases.

Requires a bachelor’s degree and 2 - 6 years of experience (for external candidates only). Provides solutions to a variety of engineering/ scientific problems that require knowledge of company products and processes. Contributes to the completion of milestones associated with specific projects. Failure to achieve expected results may cause project delays and result in additional costs. Works under general supervision. Interprets procedures when performing an assignment. May modify adjustments to standard approaches. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy.
 
Job Number: 19-12035
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/30/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
We have a great opportunity for Electrical Engineer in Saginaw, Michigan

 

This is six-twelve month contract with Direct hire possible after six months.

Consultants assigned to the Company must be degreed [minimum of a Bachelor of Science in Electrical Engineering, Masters a plus] electrical engineers with expertise in actuator systems, including but not limited to, solenoids, linear or brushed motors.

Consultants assigned to the Company must sign the Undertaking referenced in Section 9 of the Non-Disclosure Agreement prior to starting employment.

 

Duties:

 

  • Support the Company’s Sr. Electrical Product Engineer’s current project with a potential Customer; 

  • Must have an in-depth understanding of how solenoids and linear motors are designed and the optimal processes for manufacturing these components;

  • Create a statement of requirements for the supplier; 




  • Define and oversee the design validation of electrical components; 




  • Help to define assembly level test requirements for function and quality 




  • Assist with the evaluation of each suppliers’ design and manufacturing proposal 

  • Will be in direct communications with Suppliers and be able to communicate technical information with a clear understanding. 

  • Launch experience is a plus. 

  • Mechanical electrical background a plus.


 

 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33545
Job Location: Saginaw, MI
Rate: 100000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-08-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Designer (CREO Cabling)

Description:
The candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. May include utilization of computer aided design applications.

QUALIFICATIONS/EXPERIENCE
Preferred Experience Requirements:
• 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in electromechanical designs.
• Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
• Ability to apply GD&T to parts and assemblies per design requirements.
• Ability to perform tolerance analysis calculations.

Regular Experience Requirements:
• Strong communications skills.
• Ability to work effectively within a team environment.
• High energy and passion for innovation and creativity.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
 
Job Number: 1910101762
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician - Louisville, Kentucky

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client in Louisville, KY! This is a temporary opportunity with the potential to become permanent!



The Electromechanical Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a client site.



Responsibilities:

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws.




Required Skills and Experience


  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided.

  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.


Shift will be Friday through Monday from 4:00am to 2:00pm.

 


 
Job Number: 19-34100
Job Location: Louisville, KY
Rate: 24.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-28 00:00:00.0
Start Date: 2019-08-26 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Burlington, NJ

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

This is a day shift position. All candidates must be available to work one weekend day.



Position Summary

 

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required. 

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


 

Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience. 

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Must be able to lift 50 pounds on regular basis unassisted

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • This is a day shift position. All candidates must be available to work one weekend day.


 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-33238
Job Location: Burlington, NJ
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nora Sapone
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Harrisonville, MO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a particular client site.

Position Summary



 


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

 

Core Duties and Responsibilities


 


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 



Candidates must be open to shift, overtime, weekends and holidays.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



  •  



 
Job Number: 19-32817
Job Location: Harrisonville, MO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-21 00:00:00.0
Start Date: 2019-08-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Kannapolis, NC

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Technicians will be required to each work one day per weekend. Schedule will be as follows:

  • Jan to May and July to November 1: 5:00 AM to 3:30 PM  (4 10-hour days)

  • May to June and November 1 to December 31 5:00 AM to 5:30 PM (4 12-hour days)




Position Summary

 

The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities


  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required. 

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


 

Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience. 

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Must be able to lift 50 pounds on regular basis unassisted

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • This is a day shift position. All candidates must be available to work one weekend day.


 

 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24534
Job Location: Concord, NC
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-27 00:00:00.0
Start Date: 2019-06-24 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Romeoville, IL

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



This is a 1st shift, Monday through Friday position.



Position Summary



The Electromechanical Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation servicing a fleet of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills. A person in this position has the potential for promotion to a regional service representative position.



Core Duties and Responsibilities

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws

  • Perform other duties as assigned.


Education and Experience


  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by client

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.







  •  
  •  


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-34973
Job Location: Romeoville, IL
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- Stapleton, CO

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!

 

Candidates must be open to working any shift, holidays, weekends and overtime. Specific schedule is to be determined; however, there is a possibility for 1st shift hours.

Position Summary


The Field Service Technician will support fuel cell products currently installed in electric lift trucks, including performing preventative maintenance and resolving breakdowns. This person will be responsible for the installation and servicing of fuel cells at a specific location. This person will also be responsible for reporting breakdown events, parts ordering and maintenance of fuel cells at a specific location. This position presents a great amount of exposure to customer personnel and electric lift truck operators, and thus requires a person with excellent technical skills as well as communication, interpersonal and motivational skills.

Core Duties and Responsibilities 




  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required.

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • Travel as required for business needs; expected to drive safely and to adhere to all traffic laws

  • Represent company in a professional manner at all times and in all interactions




Education and Experience 




  • Minimum HS Diploma or equivalent with technical electrical coursework

  • Three (3) or more years of direct experience in mechanical and electrical troubleshooting

  • Formal training and education may be also considered in lieu of direct experience

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle

  • Must be able to lift 50 pounds on regular basis unassisted

  • Knowledge of lift truck operation and applications is highly preferred

  • General mechanical aptitude is required

  • Computer and software systems skills as applicable to position including but not limited to: Word, PowerPoint, Excel, and Outlook

  • Dynamic interpersonal skills and the ability to effectively communicate with diverse audiences and stakeholders at all levels

  • Excellent verbal and written communication skills

  • Creativity in solving technical problems

  • Ability to work independently

  • Uncompromising dedication to quality

  • Exceptional time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided by Company


 

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-27729
Job Location: Denver, CO
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-24 00:00:00.0
Start Date: 2019-07-22 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Lorin Hamm
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Inspector

Description:
We have an Excellent position for an Inspector to join a leading Fortune 500 Company located in the Austin, TX area.
Seeking candidates with electronic inspection experience with a focus on circuit card assembly. Candidates will perform Quality and workmanship inspections of soldering and mechanical assembly required in the manufacturing of electronic circuit card assemblies in a fast-paced, quality-focused environment with minimal supervision during second shift. Candidates will work with various tools including microscopes, ring lights, hand tools, and measuring devices. Task requires an ability to sit comfortably for long periods of time while meeting quality and rate goals. Candidates will be expected to review demands presented in automated systems, work with cell leads and factory manager to develop strategies to meet requirements while managing targets associated with Safety, Quality, Delivery, and Cost.

Skills Required:
• The ideal candidate should have experience with circuit card manufacturing, understand how to identify electronic components and proper orientation of them onto a circuit board according to polarity, inspect fine pitch soldering, wire mods, and mechanical assemblies.
• Candidate must have a working knowledge of the Microsoft Office suite of products and be able to use a computer to communicate with the team.
• Able to interpret and understand the instructions on process sheets, prints, or route cards.
• Able to use hand tools (cutters, pliers, pre-formers, screwdrivers, paintbrushes, etc.).
• Able to use measurement tools such as scales, micrometers, and calipers.
• Able to Identify and document defects, and calculates defect rates against specified control limits.
• Inspects subassemblies and assemblies after rework, modifications or repairs to verify defects have been corrected and ensure continuity to drawings, prints, etc.
• Verifies configuration of product to ensure conformity to most recent revision.
• Prepares basic inspection data and inputs into the Shop Floor Data System for future review and evaluation.
• Maintains required records.
• May interface with engineering regarding technical issues (i.e., clarification of engineering change orders) and problem resolution.

Experience Required:
• Six (6) months of electronic assembly inspection experience.

Experience Preferred:
• Active IPC-A-610 and J-STD-001 certifications. (class 3 solder) Six (6) months of electronic assembly inspection experience.

Education Required:
• Must successfully complete in-house IPC and J-STD-001 certifications as a condition of continued employment.
• High school diploma or equivalent.
 
Job Number: 37987
Job Location: Austin, TX
Rate: $18.00
Duration: Temp to Hire
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Engineer

Description:
Facilities Project Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The candidate will provide professional facility engineering and project management experience to designated projects and assignments.

The candidate will be responsible for the design, development, verification and documentation of the mechanical infrastructure and equipment used in fabricating, assembling, testing and inspecting products.

Bachelors degree required

Additional:
The candidate must work well with all functional groups and good communications skills at all levels are required. Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel. Projects range from small single tasks to larger scale construction projects including facility upgrades, facility renovations, special projects, and managing equipment installation. The candidate will assist in the selection and contracting process of consultants and construction teams as necessary for each project Provide hands-on involvement with equipment and processes by being available to the operators, maintenance personnel, and other Facility Engineers and gaining intimate knowledge of processes Manage capital projects on time and within budget
 
Job Number: 11082
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / certified HVAC technician required - Clearance NC

Description:
165719
Job Title: Facility Operations Analyst

Work Site Address: Fort Bragg, NC 28303
Job Number: 1811-1
Max Pay Rate: $24.50/hr
Start Date: 9/16/2019
End Date: 11/17/2019
Position Type: Contract

Job Summary:
Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Job Description:
Servicing of customers' HVAC systems on the job site.
Ordering materials, tools and instruments
Preparing reports and maintaining records on equipment and preventive maintenance
Completing required paper work timely and accurately
Troubleshooting equipment failures both in service center and on customer locations
Installing, maintaining and repairing electronic pneumatic devices related to HVAC control
Practicing and promoting safe working conditions in accordance with OSHA, and other required regulations
Maintain chillers.
Assuring that heating, ventilation and air condition systems are operating in accordance with manufacture's specifications.
Servicing water softener and check for proper operation of hot water and steam boilers
Servicing HVAC and exhaust systems, fan blowers, including filters, lubrications, thermostats, and controls for the entire building.
Servicing all building components including all physical, structure and mechanical equipment.

Qualifications and Education Requirements
Must be a certified HVAC technician.
Must be able to pass CRC Physical/Medical assessment.
BS+0-2 YRS

Qty 1 position needed

In need of a HVAC Technician for commercial facilities. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1811-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 3 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility and Design Engineer Level 2

Description:
Role: Facility and Design Engineer Level 2
Location: Vandenberg AFB, CA
Duration: 12+ months’ contract

Job Description:
• The Facility and Design Engineer will support repairs, modifications, and new designs of launch facilities in support of Launch Operations and Vandenberg Air Force Base California as part of Engineering and Infrastructure Team.
• The successful candidate will provide engineering and management support of associated facilities.
• The engineering and management support will include, but is not limited to:
• architectural, HVAC, electrical, civil, structural and mechanical systems, maintenance and facility corrosion control activities.
• The Candidate will coordinate the procurement of facility services, equipment, and will perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance.
• The Candidate will perform investigation of anomalies encountered and will be responsible for developing corrective action plans and work documents for both and sub-contractor support. The Candidate will work with various government groups including Air Force and Base Civil Engineering personnel.
• The successful candidate shall prepare Statements of Work with detailed contractor direction, and manage contractor’s activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs/modifications.
• In addition, the candidate will gather information, perform field walk-downs, and create, schedule and manage the performance of maintenance and/or corrective Work Orders performed by represented personnel.
• Support will also include schedule integration and coordination of maintenance activities around launch processing activities.
• Candidate shall have relevant facility engineering experience with an emphasis on architectural facility/building systems operations/modifications.
• The candidate shall perform engineering calculations, trade-studies, designs, evaluations, and rough cost estimates in support of the above engineering activities.
Qualifications:
• Bachelor’s degree from an accredited college in an Engineering or related discipline, or equivalent, with a minimum 3 yrs of professional experience.
• Experience with facilities engineering and plant operations.
• Experience working independently and in a team environment, with both represented and contractor personnel.
• Must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members including represented personnel, customers and subcontractors.
Ability to solve practical problems.
• Able to analyze and interpret data to make sound judgements and recommendations.
• Ability to learn and interpret mechanical and electrical drawings, logic diagrams and technical manuals.
 
Job Number: 19-07891
Job Location: Vandenberg AFB, CA
Rate: Hourly
Per Diem: No
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
First Article Quality Engineer

Description:
*This is a full time, 6 month, contract position located in Lansdale, PA*



We are looking for a quality engineer involved in First Article Inspections, who will create, maintain and develop Government Standard quality procedures for our aerospace production line. The applicant will be working on processes that affect our finished composite products using methods such as inspection, testing, and evaluating accuracy and precision of products (actual vs specification analysis) coming off production the line.



The daily duties will entail completing and reviewing of applicable forms to ensure compliance to AS9100 / 9102 standards. The applicant will be utilizing quality tools to help continuous improvement. Candidate will ensure our quality systems are implemented to meet Government contract specifications.



Required:
*2+ years’ experience performing quality engineering /quality assurance for AS9100/9102 aerospace production lines.
*Experience with first article inspection, reviewing of test data, corrective action, conducting audits.

*Able to gain a security clearance upon starting: US Citizens only may apply.

*4 year degree



Pluses:
* PPV Experience

*LEAN or Six Sigma knowledge or certification
* System auditing experience to AS9100C
*Performing source inspections and developing inspection strategies for complex mechanical parts and accessories
 
Job Number: 140
Job Location: York, PA
Rate: $32.55
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Extensive Catia V5 and SmarTeam experience required.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-332
Job Location: Savannah, GA
Rate: $70 to $ $80
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Heavy Equipment Design Team Lead

Description:
*This is a full time, 2 year contract, located in York, PA*



We are hiring for a Design Team Lead, who will be working on Military Recovery Vehicles designing parts of the vehicle like stowage, AFES, recovery equipment (Winches, Boom, Spade), hydraulic subsystems, braking,steering and other operator controls such as heater, auxiliary power unit, engine and fuel systems. This project is for helping with the M88 modernization program.



Contrator's role will be that of the go to, IPT, small team project lead who will analyze, design, select materials, work with BOMs, work with CAD applications, create and adhere to schedules/milestones, budget, work with part specifications/procurement, supplier management.



Required:

*4 years experience designing mechanical hardware including brackets, covers and seals working on heavy construction equipment or other off-road equipment.

*Experience leading small design teams

*Understanding of ASME 14.100/Y14.5; Understanding of BOMs

*Familiar with part selection processes, working with procurement and sourcing of materials from appropriate venders

*BSME or similar Engineering Degree



Pluses:

*DoD experience/or working on military vehicles.

*Experience in the development and design of on-vehicle stowage provisions for equipment such as maintenance tools, deep water fording kits or other vehicle operator controls like braking, steering, shifting, throttle, and suspension control

*Familiar with developing and designing Stowage of special equipment
 
Job Number: 915
Job Location: York, PA
Rate: $49.20
Per Diem: yes split
Duration: 2 year
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER

Description:
Role: : MECHANICAL ENGINEER
Location: Centennial, CO
Duration: 6+ months contract
Job Description:
1. Strength Engineer to conduct strength analysis for structural design for the launch vehicle upper stage.
2. The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies.
3. Finite element analysis will use NASTRAN/FEMAP. Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.
4. Knowledge of superelements will aid in efficient non-linear analysis.
5. Need someone with a min of 8 yrs exp
 
Job Number: 19-04510
Job Location: Centennial, CO
Per Diem: No
Overtime: No
Duration: 06 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Operator

Description:
Machine Operator



Shot peening is a cold working process used to produce a compressive residual stress layer and modify the mechanical properties of metals and composites. It entails impacting a surface with shot (round metallic, glass, or ceramic particles) with force sufficient to create a plastic deformation.

  • This position is for a client in the Ambridge Area




  • The position is permanent in a metal manufacturing environment (Shot peening), exciting opportunity to learn a trade and learn all aspects of the business

  • Opportunity to grow with the company




  • Candidate must have a resume and interview with the client prior to starting




  • Must have Machine Operating experience and a background in metals is preferred

  • CNC and PLC experience preferred




  • Candidate must also be able to do their own set-ups, run the parts and use hand tools

  • Must be able to travel for assignments




  • Must be comfortable reading blueprints and read measurements


Please give me a call if you are interested in getting more information about the position or if you would like to schedule a phone interview appointment anytime soon.

My phone numbers are 412 246 4828 or 412 281 8235. Please ask for RAMI ASHAMALLA. Or you can email me directly at rashamalla@nescoresource.com



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-32692
Job Location: Ambridge, PA
Rate: 15.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-15 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Tech/Welder

Description:
Maintenance Technician located in Blawnox, PA.



Experience

Mechanical experience with pumps, hydraulics, pneumatics, etc.


Electrical experience is a plus.



The candidate would have overtime opportunities and would be expected to work overtime.



Hours would be mainly daytime (anywhere from 6:00 am to 6:00 pm but would also need to be available at certain times later at night and on some weekends.




Please send your resume for review and consideration or contact Rami Ashamalla at 412 246 4828 or send your resume at rashamalla@nescoresource.com



Thank you,



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-24215
Job Location: Blanwnox, PA
Rate: 18.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rami Ashamalla
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
The Manufacturing Engineering position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate:
• will create manufacturing assembly documentation, concept tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
• must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• must be able to perform cost estimates, work to schedules, and write procedures and policies.
• must be able to review drawings and concepts and resolve producibility concerns.
• must provide technical support to the manufacturing facility as well as to the external suppliers.
• will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• must be able work well in an integrated product development/ design environment.
• will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• must possess a positive attitude and be able communicate well with staff, IPD teams & management.

Required
• Candidate must have 5 to 7+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.
• Experience with an MRP (Manufacturing Resource Planning) system is desirable.

Desired
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree
• Experience should include working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
 
Job Number: 1910103672
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Job Responsibilities
 
Reviews engineering designs to provide tooling, equipment, operation sequence, and other technical wherewithal to enable marine craft and land vehicles to be manufactured profitably.
Seeks alternative manufacturing strategies to reduce production costs, increase output, or improve product quality.
Analyzes engineering design to provide feedback to improve manufacturability of components and assemblies.
Calculates labor hour and learning curve projections for new manufacturing programs.
Oversees creation and maintenance of Manufacturing Bill of Material (MBOM) to break engineering product structure into logical manufacturing units and sequence to enable MRP order releasing, scheduling, and purchasing activities.
Authors and maintains shop floor technical work instructions.
Participates in Root Cause / Corrective Action (RCCA) activities to troubleshoot and prevent production defects.
Ensures manufacturing processes and procedures comply with regulatory and contractual obligations.
Qualifications
 
Job Qualifications:
Experience in shipbuilding, marine small craft, aluminum and steel welding, or construction of large fabricated assemblies is desired.
Experience with Enterprise Resource Planning (ERP) / Material Requirements Planning (MRP) software and Solidworks or other 3D CAD programs is desired.
Must be a U.S. citizen or Permanent Resident with the ability to obtain and maintain a security clearance.  
Must possess effective written and oral communication skills and the ability to work in a collaborative team environment.  
Applicants are expected to have the ability to apply logical or scientific thinking to a wide range of intellectual and practical problems.
 
Education Requirements:
Bachelor’s degree required.  Preferred degrees are Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Naval Architecture, or Marine Engineering.
Preferred years of experience per level:
Manufacturing Engineer: 2-6 years
Sr Manufacturing Engineer: 6-10 years.
Note: Level will be determined based on relevant experience, scope of role, reporting structure and management’s discretion
 
Job Location: New Orleans, LA
Rate: 45-48/hr
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11138
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Position Purpose:
• Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Entry level position.

Principle Duties and Responsibilities:
• Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Work on special projects.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.

Other Requirements:
• Basic knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-367
Job Location: Savannah, GA
Rate: $40/hr
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Location: Savannah, GA
Rate: $40.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Position Purpose:
1. Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Perform productibility studies from engineering drawings.
5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
6. Incorporate Lean Manufacturing Methodology into existing and future processes.
7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
8. Support all Safety, Sustainability and Ergonomic Initiatives.
9. Aid in development and maintenance of Business Continuity Plan.
10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
11. Author DRDI/DMT rework instructions to support effective corrective actions.
12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.

Additional Functions:
1. Work on special projects.
2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
3. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
4. Perform other duties as assigned.

Other Requirements:
1. Basic knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Specialist certification or higher preferred.
 
Job Number: 11351
Job Location: Savannah, GA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Unique Skills:

• SAP
• SOLUMINA
• CATIA
• SMARTEAM


Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 24-369
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. SAP, Solumina, Catia, and Smarteam

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 11381
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Background in structures planning preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11053
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support.
2. Candidates must have experience with Catia V5.
3. Experience with Solumina and SAP is preferred.
4. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3+) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 11005
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
2. Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 3+ years of Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures.
8. Must demonstrate knowledge of ME policies and procedures.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10956
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Position Purpose:
• Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Aerospace interior experience is a plus.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 4 years manufacturing engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
• Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings.
• Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
• Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
• Keep current on state-of-the-art manufacturing developments.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Develop business case and present to management for process improvement approval.
• Assume the duties of the ME Group Head in his/her absence.
• Assign and review work of subordinate personnel.
• Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
• Lead/coordinate the implementation of projects between multiple orgs.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Ensure quality policies are being practiced; make recommendations to improve quality.

Other Requirements:
• Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
• Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
• Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
• Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.
 
Job Number: 24-368
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Aerospace interior experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed.
7. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
8. Keep current on state-of-the-art manufacturing developments.
9. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. Develop business case and present to management for process improvement approval.
11. Assume the duties of the ME Group Head in his/her absence.
12. Assign and review work of subordinate personnel.
13. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
14. Lead/coordinate the implementation of projects between multiple orgs.
15. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
16. Support all Safety, Sustainability and Ergonomic Initiatives.
17. Author DRDI/DMT rework instructions to support effective corrective actions.
18. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
19. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 11370
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer – Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Level 4 = $50.00 - $61.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** The Hiring Manager is looking for candidates who have significant experience supporting machining and welding operations **

** Onsite interviews required **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.

Education:
Level 3: Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Level 4: Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 11085
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Planning Specialist

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
• Interact with Integrated Product Teams (IPT) and Program Management to identify and mitigate risks
• Understand the Master Production Schedule, and communicate with supply chain organization for impacts to schedule
• Create and manage demand to drive material requisition needs
• Provide material position data to support proposals
• Review and approve design layouts
• Participate in make/buy decision and vendor selection processes
• Review, approve and execute the implementation of Engineering Changes
• Request and maintain Material Master data in SAP
• Create and maintain detail inventory shortage report
• Initiate Purchase Requisitions and Change Orders, and Vendor shipments (Returns and Outside processing)
• Initiate material ownership transfer requests

Experience Qualifications:
• Associates Degree in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred
• At least 6 years of experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
• Self-directed; strong planning and organization skills with ability to be adaptable to changing priorities and assignments
• Manage daily tasks and come back with solid results / solutions
• Ability to read engineering drawings
• Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
• Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 1910106051
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Testing & Process Quality Laboratory Specialist

Description:
The ideal candidate will support, perform and manage testing and control of raw materials and finished product quality, ensuring compliance with company standards and applicable government regulations as well as lean initiatives within manufacturing operations.

Some local travel will be required to conduct monthly testing at facilities located in Bridgeport CT and Shelton CT. Typically travel is limited to once or twice per month for each offsite location.

The Specialist will be working in the Materials & Process Quality Laboratory. The role will include preparation of metallic and composite samples using basic machining equipment to perform ASTM type testing on raw materials as well as production part samples. Typical analyses performed include testing of chemical processing lines, metallographic testing, composite material testing, metallurgical testing, raw material specimen preparation, fluid testing, and oven and autoclave system accuracy testing.

Basic Qualifications:
• High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical tasks.
• Experience working in a laboratory/manufacturing environment.
• Strong work ethic.
• Comfortable working with computers and the Microsoft suite.
• Strong reading comprehension skills including capability to interpret engineering specifications and test procedures
• Strong communication skills needed to support team-based work environment.
• Strong organizational skills with the ability to manage in a fast-paced environment with competing priorities
• Ability to follow written work instructions required.
• Off-shift work and overtime may be required to support business needs.

Desired skills:
• Knowledge of Basic Chemistry
• Familiarity with oven surveys
• Experience working in a laboratory environment
• Experience performing tests in accordance with ASTM and/or AMS standards
• Experience working in the Aerospace industry or at a NADCAP accredited organization
• Mechanical aptitude
• Familiarity working with basic hand tools
• Experience making composite layups
 
Job Number: 123123123
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Drive Systems)

Description:
Please send resumes to Becky Norman at bnorman@butler.com.

Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration.  This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements. 


Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.

Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements: 

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any
 
Job Number: 57715
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: Sept 2019
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
The Mechanical Designer Tech (contract/temp) is responsible for creating marine engineering model and drawing for vehicles detail parts and assembly development using SolidWorks.

Responsibilities:
• Design components and assemblies required for the development and manufacture of company products.
• Create SolidWorks models and drawings with strong understanding of product structure tree.
• Design complex mechanisms, components and/or assemblies from customer specifications or from sketches or engineer’s verbal instructions.
• Provide sketches, dimensioning and tolerancing guidance to detailers in the preparation of parts drawing.
• Perform duties of Product Drafting Checker, Product Designer, Product Layout Draftsman or Product Detailers, as required.
• Performs other job related duties as assigned by management.
Qualifications

Education:
Associates Degree in Drafting preferred.

Position Requirements:
• Five (5) plus years experience in creating 2D/3D models and drawings for electro-mechanical using SolidWorks or similar 3D design package.
• Working knowledge and demonstrated experience with mechanical or electrical engineering design, 3D model and drawing drafting standards.
•Working knowledge and experience working within an EPDM system.
• Understand and practice ASME Y14.100M, ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M, ASME-14.34M and ASME 14.5M.
• Understand basic mechanical assembly requirements.
 
Job Location: New Orleans, LA
Rate: 42-45/hr
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Must have excellent communication and interpersonal skill.
Must have experience or familiarity with production floor support for a combat vehicle where heavy aluminum welding is done
Must have experience using CREO software and the Windchill database
Must have experience reading and interpreting highly complex structure weldment drawings and models
Extensive knowledge/experience with drawing, model and GD&T standards and application
Ability to evaluate and solve complex technical problems working with program team members and others that require extensive investigation and analysis
Conducts effective meetings, discussions and presentations.
 
Job Number: 47354
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Secret Clearance)

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing



Required:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experienc



****Strong SolidWorks experience is required



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-34863
Job Location: Broken Arrow, OK
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - 37849

Description:
We have an Excellent Contract to Hire position for a Mechanical Engineer to join a leading Company located in the Elgin, OK area. Job ID 37849.

**U.S. Citizenship Required.

Seeking a Mechanical Engineer with strength in electromechanical line replaceable unit (LRU) and component design to provide engineering support to the (PIM) program.

Job Responsibilities:
Support in Production Team and will serve as an interface between design and production engineering for analyzing and solving problems related to the design of mechanical subsystems, assemblies, and components.
The Engineer will support design-related change notices and variance activities.
The Engineer is expected to apply mechanical engineering design and/or analytical theory, principles, techniques, and practices to analyze and interpret design specifications, drawings, documentation, models, and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
Rapidly troubleshoot and isolate system-level problems discovered during production and determine root-cause including design defects and production/supplier defects and recommend near-term workaround.
Analyze Field/Test Incident Reports and determine root-cause including design defects and production/supplier defects.
Perform verification testing and/or data collection to support the implementation of corrective actions including technical analysis, calculations, and evaluation of results using specialized equipment and/or computer programs.
Develop and write technical documentation, make revisions to existing documentation, and provide input to technical papers or presentations.
May deliver technical presentations to the Integrated Product Team in a group setting.
Provide Engineering consultation to other technical groups.
Recommend design enhancements for the system, subsystem or component design to the design engineering group.
Work from specific assignments, objectives and technical guidance received from supervisor or senior engineering personnel.
Make technical decisions on work consistent with the assignment, conferring with supervisor to determine alternative approaches and solutions to technical applications or problems.
Maintain a safe work environment and ensure compliance with safety objectives, policies, and rules. Job Summary (will not post to career site) Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
 
Job Number: 37849
Job Location: Elgin, OK
Rate: 33.00
Duration: 12 Month+
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance KY

Description:
165604 Job Title: Mechanical Engineer

Work Site Address: Lexington, KY 40516
Job Number: 1783-1
Max Pay Rate: $63.00/hr
Desired Start Date: 9/12/2019
End Date: 12/13/2019
Position Type: Contract


Job Summary:
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.


Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS

Qty 3 positions required
 
Job Number: JE-1783-1S
Job Location: Lexington, KY
Rate: 63/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - NASTRAN/FEMAP

Description:
Role: : Mechanical Engineer - NASTRAN/FEMAP
Location: Centennial, CO
Duration: 6 months’ contract

Job Description:
Conduct structural analysis and contribute to the design and testing of propulsion fluid systems/components involving metals, non-metallic or composite structural materials in cryo and non-cryo environments. Propulsion systems include structures, hydraulic components, pneumatic components, fluid transfer components, ducting designs. Analyzes damage tolerance, durability, design allowables, dynamic and structural modeling. Perform structural testing as required. Tools utilized may include NASTRAN, FEMAP, NX CAE, PATRAN and a variety of software applications.

Basic Requirements:
• Bachelor’s Degree in Mechanical or Aerospace Engineering from an accredited university
• 5+ years of relevant job experience
• Time management skills and strong self-initiative
• Ability to operate independently, and work as part of a team
• Ability to present technical concepts and solutions
• Ability to apply design concepts to real world solutions
• Ability to assess and interpret engineering drawings, specs, and industry/government standards
• Ability to create and modify Finite Element Models and perform classical hand analysis
• Travel may be required to other *** locations and suppliers
Preferred Qualifications
• Experience with propulsion related systems and components
• Internship or experience in an aerospace or aviation field
• Experience with Aerospace engineering applications
• Hardware manufacturing and testing experience
• Knowledge of machine shop practices, capabilities, accuracies and limitations
• Proficient with Microsoft Office platform tools
• Demonstrated proficiency in team leadership
• Excellent communication skills (oral and written)
 
Job Number: 19-05535
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / Landing gear design experience required / CATIA V5 or Solidworks or Pro Engineer or Creo or Unigraphics or NX / GD&T hand stress analysis / degree required - Clearance CA

Description:
165951 Mechanical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 9/3/2019
End Date: 9/4/2020

Job Description:
Prior demonstrated experience in landing gear design and one or more of the following technical areas:

- CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
- Experience in mechanism design
- Experience with metallic and composite design
- Experience with GD&T (Geometric Dimensioning and Tolerancing)
- Experience with hand stress analysis
- Degree in an Engineering Discipline


Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1900-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
POSITION SUMMARY:
Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

• 5+ years of experience.
• BS degree preferred
• Must have ON THE JOB EXPERIENCE with Solidworks.
• Preferably 5 years of experience from aircraft completions industry
• Must have experience designing waste water systems as that carries the most importance.
• They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
• Must be self-sufficient and NOT require guidance.
• It is preferred if they have experience with collaborating data in Solidworks.
• Experience with report writing


The Structures Company is an AA/EOE.
 
Job Number: 340
Job Location: IN
Rate: $57-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Dulles, VA ) TS8946614 and TS9293043

Description:
Mechanical Technician ( Dulles, VA ) TS8946614 and TS9293043
8 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

Seeking TS/SCI candidates with 3-5 yrs+ exp in payload/spacecraft integration.

Manager is flexible on experience , wants Mechanical Techs with a active clearance

- Hands-on detailed work required, including extremely fragile space product installations, modifications, and general handling.
- Ability to demonstrate detailed technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams.
- 100% adherence to established ISO processes, diligence to detail, and efficient execution with quality results for cost effectiveness *absolutely required*.
- Ability to learn quickly. Bonding, taping, torquing, etc. with delicate honeycomb composite/aluminum panels and aluminum brackets a minimum. Must have 'a touch' for delicate equipment. Must have virtually zero defects in workmanship.
- Ability to proactively identify issues, escalate to appropriate channels, and *offer* solutions to engineering for review. -
- Ability to work with diverse team, take constructive feedback from QA support personnel.
- Experience with working inside Clean Rooms, Hazardous Material Handling, Hazardous Operations protocols, and related operational protocols required.
- Knowledge of Excel, Word, Powerpoint, general computer handling, and Tool Control required. ESD, FOD, and 5S management techniques required. 3D CAD, TipQA, Windchill, and CREOView preferred.
- Knowledge of advanced machine shop principles helpful. Little to no machine shop work is done by I&T Techs, but interfacing with Machine Dept. required on occasion.
 
Job Number: TS9293043
Job Location: Dulles, VA
Rate: Open
Per Diem: No
Overtime: yes
Duration: 8 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Mechanical Systems Design Engineer

Description:
• Must have experience with 2D and 3d drawings in Catia V5
• Must have experience with either Aircraft Doors Design, Hydraulic Design, Flight Controls, or Pneumatics



The Structures Company is an AA/EOE.
 
Job Number: 338
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Systems / Mechanical Test Engineer - Clearance CA

Description:
Principal Systems/Mechanical Test Engineer (Job Number: 19024355)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Dec 1, 2019

Target End Date: Nov 27, 2020

Pay Rate: $51 - $54

Work schedule: 4/10

Duration of Assignment: up to 1 year

Selected candidates are expected to perform the following…
Test Engineer
• Author and publish Test Procedures.
• Plan and arrange the labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
• Maintain metrics on status of testing and constraints.
Designer/ Mechanical Engineer
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work under general direction with minimal to no oversight, work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree plus 5 yr. experience in test operations.
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1797S5
Job Location: Palmdale, CA
Rate: 54/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Safety Engineer

Description:
Process Safety Engineer  



ROLE SUMMARY

This posting is for a position on the PSM Team supporting process safety and compliance to OSHA PSM and EPA RMP. Primary responsibilities will be organizing process safety information and facilitating process hazard analyses. Additional responsibilities will be managing of change control, providing process safety support for projects, tracking PHA recommendations and participating in incident investigations.



PRIMARY ROLE RESPONSIBILITIES

  • The practical and effective interpretation, implementation and execution of both external (OSHA, EPA RMP) and internal Pharmaceutical Guidelines related to Process Safety Management (PSM) that impact multiple areas and departments within the PGS Kalamazoo site.

  • Interpretation and application of chemical reaction hazards data to full scale production processes as it pertains to assessing risk

  • Leading comprehensive Process Hazard Analysis (PHAs) on both exiting processes/facilities and capital projects

  • Participate in and/or lead incident investigations as needed/assigned


Additional responsibilities will also include, as needed


  • The development and delivery of PSM related training materials to enhance the understanding and effectiveness of the program.

  • Represent EHS on PSM issues with other plant stakeholders and coordinate PSM initiatives with other Pharmaceutical operational and support areas (i.e. - Engineering CPA process, Mechanical Integrity program, Emergency Response)


QUALIFICATIONS

The position requires a Bachelor's Degree in Chemical Engineering.

• Practical experience in Process Safety, Manufacturing or Engineering





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24802
Job Location: Kalamazoo, MI
Rate: 70000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Safety Management Specialists

Description:
Process Safety Management (PSM) SPECIALIST



ROLE SUMMARY

The PSM Team supporting process safety and compliance to OSHA PSM and EPA RMP.  Primary responsibilities will be organizing process safety information and facilitating process hazard analyses.  Additional responsibilities will be managing of change control, providing process safety support for projects, tracking PHA recommendations and participating in incident investigations. 

 

ROLE RESPONSIBILITIES

Primary job responsibilities include:

  • The practical and effective interpretation, implementation and execution of both external (OSHA, EPA RMP) and internal Pharmaceutical Guidelines related to Process Safety Management (PSM) that impact multiple areas and departments within the Kalamazoo site. 

  • Interpretation and application of chemical reaction hazards data to full scale production processes as it pertains to assessing risk

  • Working with key stakeholders evaluate the technical, safety and regulatory impact of proposed equipment and process changes as it applies to PSM and provide leadership in risk-based decision making

  • Leading comprehensive Process Hazard Analysis (PHAs) on both exiting processes/facilities and capital projects

  • Compiling and interpretation of process safety information

  • Participate in and/or lead incident investigations as needed/assigned

  • Leading process safety related projects


Additional responsibilities will also include, as needed


  • The development and delivery of PSM related training materials to enhance the understanding and effectiveness of the program.

  • Represent EHS on PSM issues with other plant stakeholders and coordinate PSM initiatives with other Pharmaceutical operational and support areas (i.e. - Engineering CPA process, Mechanical Integrity program, Emergency Response)


 

QUALIFICATIONS

The position requires a Bachelor's Degree in Chemical Engineering. 

•             Practical experience in Process Safety, Manufacturing or Engineering

•             Knowledge and/or experience with chemical reaction hazards data, emergency relief systems design, P&IDs, and hazardous analysis methodologies. 

•             Experience with chemical release modeling software

•             Demonstrated ability to successfully engage with multiple levels of the organization and the proven ability to lead cross functional teams

•             Demonstrated leadership and technical capabilities

•             Successful track record at self-directed task accomplishments

 





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24804
Job Location: Kalamazoo, MI
Rate: 59600.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Simulation Engineer / Tool Designer

Description:
Location: Chula Vista, CA
Rate: $48.50/HR (willing to go higher for the right candidate)
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split / Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****

Basic Qualifications:
1. Bachelor’s degree (BSIE, BSME, BSAE) from an accredited college, or equivalent experience/combined education
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication.
5. Experience with CATIA/DELMIA Simulation
6. Experience working with or supporting manufacturing / production environment.
7. Five plus years’ experience in producing Off Line Programming (OLP’s) using Delmia in manufacturing environment, preferably in an aerospace, but not required.
8. Automotive OLP experience is acceptable
9. Experience demonstrating mechanical aptitude for problem solving abilities and resourcefulness.
10. Must be proficient in Delmia

Required Competencies:
1. Ability to read and thoroughly understand technical Model Based Definition 3D Models/drawings
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Ability to identify and find specifications
4. Comprehensive Knowledge of Delmia & Catia V5 systems.
5. Attention to detail.
6. Ability to multitask in a fast paced environment.
7. Ability to work independently and as part of a team.
8. Ability to think independently and problem solve.
9. Good planning skills
10. Proven ability to work independently with limited direction and highly motivated
11. Proficient in Microsoft Office computer skills

Desired Skills:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Manufacturing simulation or virtual manufacturing tools – DELMIA
3. CAD applications - CATIA v5/v6
4. Discrete event simulation methods – Production Systems Simulation, DELMIA
5. Manufacturing Execution Systems
6. Digital work instruction tools
7. Augmented Reality (AR)
8. Automation/Robotics
9. Self-motivated change agent, has a bias for action and a sense of urgency, demonstrates accountability by holding self and others accountable to the team charter.
10. A demonstrated capability to think strategically and execute tactically.
11. Demonstrated communication skills, both written and verbal.
 
Job Number: 11115
Job Location: Chula Vista, CA
Rate: $48.50/HR +
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planner/Scheduler

Description:
Job Description
Major purpose: Prepares, develops and coordinates the integrated master plan and integrated master schedule to meet all program objectives. Ensures major projects and program schedules and plans are horizontally and vertically integrated across company functional groups including finance, engineering, material, manufacturing, and quality. Tracks plans and schedules, performs risk analysis, identifies and resolves critical path and network logic conflicts. Utilizes Gantt, PERT, milestone charts, earned value management and other project management techniques to gauge progress and identify performance variances to facilitate focus and intervention on critical areas.
Major functions: The Program Planner/Scheduler has primary accountability for schedule performance of Indefinite Delivery/Indefinite Quantity (IDIQ) contracts for the manufacture of components and assemblies for rotary wing aircraft. Duties include the below,
• Track plans and schedules; take action to correct or mitigate material resource plan (MRP) exceptions by working closely with other functional groups and the customer.
• Daily review of schedule constraints; ensure all constraints have an owner and expected resolution date; take action to resolve constraints owned by the Program Office or customer.
• Performs risk analysis and is proactive in schedule risk mitigation.
• Ensures MRP parameters are appropriate; makes changes as needed.
• Prepares regular reports for the Program Manager and customer on status of deliverables.
Technical/Functional skills:
Education/Experience/Licenses etc.: Preferred skills:
• 6-9 yrs with a BA, 4-7 yrs with MBA or relevant yrs of experience in lieu of
• Strong interpersonal skills; can demonstrate successful interaction with cross-functional teams in prior roles.
• Experience in SAP Production Planning module.
• Intermediate level experience with Microsoft Excel.
• Basic familiarity with sheet metal manufacturing operations.

Physical Requirements: Primarily manufacturing/assembly environment. Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current. Must be able to bend and reach. Must have close visual acuity such as viewing a computer terminal, extensive reading, visual inspection involving small defects, small parts, and/or operation of machines, and/or assembly or fabrication parts at close distance to the eyes. Must be able to communicate effectively. Must be able to maneuver up to 20 pounds. Will be performing substantial movements (motions) of the wrists, hands, and/or fingers.
Scope information:
 
Job Location: Crestview, FL
Rate: 33.50/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
Project Manager

Location: Saginaw, Michigan

 

 The Project Manager is accountable for Project Management through all phases, from design through engineering, manufacturing, production and finally to field service (including installation, commissioning, and project closeout). A Project Manager will work with Sales and estimating to assist with bid pricing and in support to both internal and external Sales staff as needed. Also collaborates with both domestic and international representatives and customers to provide relevant answers to all questions pertaining to potential and current projects. Successful candidates will be responsible for managing clients, coordinating engineering work, developing and monitoring project performance, as well as overseeing and facilitating detailed design elements. Candidate will need to possess the ability to track progress and compare results against design requirements while achieving schedule and cost targets. The ideal person for this position enjoys a challenge, a fast-paced environment, and is willing to do what it takes to produce the necessary results.

Job Scope and Responsibilities:

 Essential Functions:

  • Although these are the essential functions, the specific duties listed with each are a brief summation.

  • Provide technical support to the entire Sales organization, including representatives and consultants as well as current and potential customers.

  • Prepare, in a timely manner, domestic and international quotations at the request of Sales, Duperon Corporation representatives, and customers.

  • Assist Sales with preliminary specification and drawing reviews.

  • Working with the mechanical engineers on modifications of equipment due to site constraints or new site developments.

  • Provide after-sale support to existing customers, representatives, and domestic sales as required.

  • Direct, coordinate, and exercise functional authority for the planning, organization, control, integration, execution, and completion of projects and orders. This is to include, but not be limited to.

  • Preparation, monitoring, and control of all project schedules and timelines

  • Preparation, analysis, and timely completion of all project submittals

  • Analysis of appropriate manufacturing instructions, project specifications, and documentation

  • Analysis and approval of purchased materials and schedules

  • Operation and Maintenance manual arrangement and submission

  • Shop test documentation for quality control

  • Shipping (means and most efficient cost)

  • Completion of final shop tests and acceptance


 

 

 

Required Skills:

 

  • Required: 3 - 5 years experience in Project Management

  • Strongly Preferred: Construction/Manufacturing background, or demonstrated ability to adapt experience to this environment.

  • Required: Understands contract language and knows how to manage terms and conditions.

  • Required: Understanding of mechanical blueprints and concepts.

  • Required: Computer Proficiency: 5 years proficiency in MS Office, including Excel, Word and PowerPoint


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33557
Job Location: Saginaw, MI
Rate: 80000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
We are looking for a Quality Engineer to join our team. The successful individual will provide production support by performing the following activities:



This position supports the plant Quality department and systems to ensure support of process improvements, quality and new product activities, and promotes the use of performance excellence.

Areas of responsibility include:

Plant TL 9000 certification, internal auditing, supplier management, customer satisfaction and management of changes that impact quality metrics and systems. This position reports to the Quality Manager.

Day to Day Responsibilities:

  • Responsible for maintenance of Quality Management Systems

  • Supports preparation for TL 9000 certification

  • Supports document control and change management for the plant

  • Participates and/or leads customer notifications and supplier quality investigations

  • Technical support for first articles and receiving inspection

  • Participates in internal audits of Quality Management Systems

  • Responsible for identifying and providing training for internal auditors

  • Reviews document changes, process evaluations, and product deviations

  • Reviews key quality metrics (PPM) and develops improvement plans for manufacturing areas. Alerts appropriate levels on trends and critical quality issues

  • Responsible for ensuring supplier corrective actions are submitted and addressed in a timely manner

  • Lead/participate in supplier qualification

  • Participates on new product introductions

  • Responsible for ensuring process performance is tracked in key manufacturing areas and data is reviewed and reported

  • Ensures that sampling plans are adequate and Measurement System Analysis (MSAs) are conducted consistently

  • Executes quality assurance processes and systems to ensure that product meets all applicable quality requirements

  • Lead/support process controls and improvement such as identifying key process inputs and outputs, Critical to Quality (CTQ) and process control plan.


Hours of work/work schedule/flex-time:


  • 40 hours per week, additional hours/weekends when needed to support project work/quality issue resolution


Desired Skills:


  • SAP Quality and Material Modules

  • ASQ Certified Quality Engineer and certified ISO 9001 quality auditor

  • Six Sigma Green Belt or DMAIC project experience

  • Use of Lean tools

  • Knowledge reading and interpreting blueprints and Geometric Dimensioning and Tolerancing (GD&T) plans for manufacturing

  • Knowledge using precision measuring instruments

  • Knowledge of manufacturing of Optical assembly components and product attribute


Soft Skills:


  • Ability to work within a team environment (strong team player)

  • Proven self-starter, able to effectively handle high levels of uncertainty and change


Required Qualifications:


  • Bachelor's degree in Electrical Engineering

  • Three to five years of progressive manufacturing engineering experience

  • Jig and fixture design experience

  • Good analytical and problem-solving ability

  • Experience with 3-D CAD programs, such as Solidworks

  • Strong project management skills

  • Hands-on mechanical aptitude

  • Must display maturity and a high level of professionalism

  • Must know Ohms KW and Voltage

  • Must have Automotive Manufacturing experience

  • Proficient in Problem Solving

  • Work 50 hrs /week

  • Must be flexible

  • Carry a heavy work load

  • Proficient in SPC Charts Creating and maintaining

  • Manage the Quality Boards and Charts

  • Proficient in Problem Solving Forms

  • Team Player and work on your own

  • Excellent communicator and presenter


Authorized to work in the US for any employer

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-27978
Job Location: Irving, TX
Rate: 75.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (FRACAS)

Description:
*This is a full time, 9 month contract to hire position, located in York, PA*



We are seeking a contract Reliability and Maintainability (RAM) engineer who will be performing high level math and risk analysis of aerospace models/systems designs that ensure maximum availability and sustainment. Candidate will be using functional Failure Modes Effects and Criticality Analysis (FMECA) and FRACAS to reduce or eliminate risk, using failures modes to assess improvements and update analysis by evaluating test results.



Daily use of block diagrams, Test Incident Reports (TIRs) input into the Failure Reporting Analysis and Corrective Action System (FRACAS) database, working with staff to unearth potential failure modes and mitigate, while tracking modifications to assist in assessing program success. Will use Reliability Enhancement Testing (RET) and reliability demonstration testing.



Required:
*10 years’ experience in Reliability, typically RAM or RM&T, analyzing data sets and identify high drivers.
*Experience performing allocations/predictions, FMECA and FRACAS.
*Familiar with reliability software tools (preferably WQS)
*Understanding of mechanical, electrical, electronic and hydraulic engineering.
*4 year degree in Engineering, Math or other Science



Pluses:
*Knowledge of WQS software
*Familiar with Specialty RAM-T disciplines.
*ASQ CRE Certification
 
Job Number: 501
Job Location: York, PA
Rate: 59.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SCA Aircraft Mechanic II - Clearance KY

Description:
Job Title: SCA Aircraft Mechanic II

Work Site Address: Lexington, KY 40516
Job Number: 1750-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Qualifications and Education Requirements
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

Qty 2 positions needed

This position is for an aircraft mechanic. The candidate will be working on mechanical modifications and repairs.
 
Job Number: JE-1750-1S
Job Location: Greenville, CA
Rate: 31.59/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL ENGINEER-RS 4

Description:
Job Title: STRUCTURAL ENGINEER-RS 4
Location: Vandenberg AFB, CA
Duration: 12 Month Contract

Job Description:

Work duties will include mechanical and structural design for facility support systems as well as creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
Performing walk downs of projects to verify details will be required.
Design work to include solutions to existing issues with current equipment as well as new designs.
Creating of detailed drawings including parts lists and bill of materials.
Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital manipulation.
Perform configuration management and drawing release functions per *** LSP-EI-002.


Basic Qualifications:
Bachelor Degree Required
A minimum of 5 years of professional drafting experience.
Have mastery of AutoCAD drawing program.
Experience with drafting electrical, mechanical and structural designs.
Experience working independently and in a team environment.
Proficient knowledge in Microsoft Office Suite.
The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
Ability to read and interpret mechanical and electrical drawings and logic diagrams.

Preferred Qualifications:
Drafting experience in a variety of design environments.
Expert in AutoCAD 2018. Experience with other CAD programs such as NX and / or Revit preferred.
Associate’s degree plus 6 years or more of directly related experience (for external candidates only).
 
Job Number: 19-07276
Job Location: Vandenberg AFB, CA
Rate: Hourly
Per Diem: No
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Hydraulics Systems Modelling Engineer - China

Description:
Our Aerospace Client based in China is looking for additional engineering Support. They require a Senior Performance & Dynamics Engineer. This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

The Senior Performance & Dynamics Engineer will be involved in conducting performance and dynamic analysis for  mechanical, hydraulic and occasionally basic electrical systems as they relate to aircraft, hydraulic, landing gear, extension/retraction, brake and steering. This engineer is also required to support requirements definition, and validation, verification test activities and  assist with the development of methods and tools. Possessing in-depth knowledge of mechanical and hydraulic systems, this engineer will generate strategies as they relate to performance and dynamics activities on given programme(s).


Key aspects of this job include the following:

 

  • Build computational models and run simulations.
  • Calculate static and dynamic loads.
  • Conduction performance and frequency response analysis.
  • Conduct stability, shimmy, model analysis and failure case analysis.
  • Correlate and validate computational models.
  • Write and validate performance and dynamic requirements.
  • Define and document simulation cases and pass/fail criteria.
  • Optimise design solution in conjunction with other engineering disciplines.
  • Define test requirements and analyse and interpret test results.
  • Adherence to the programme schedules.

Skills/ Qualifications / Experience Sought:

 

  • Knowledge of landing gear systems / hydraulic systems.
  • Experience of dynamic analysis and computational modelling and simulation.
  • Experience of model correlation and validation.
  • Knowledge of airworthiness requirements and certification.
  • Basic knowledge of systems and electrical engineering.
  • Working knowledge of MATLAB/Simulink, ADAMS and AMESim.
  • Sufficient experience to write requirements.
  • Minimum 20 yrs of related working experience in related landing gear or hydraulics.
  • Had working experience with major airframers or major suppliers.
  • Fluent English, with good communication skills.

 
Job Number: BH-59-3
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 08/18/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Engineer

Description:
Job Description
Major purpose: Performs a variety of quality-related functions in support of regulatory, customer, and company requirements/objectives. Coordinates/develops/monitors/maintains necessary procedures, controls, and/or programs to assure compliance/conformance to regulatory, customer, and company requirements.
Major functions: ESSENTIAL DUTIES AND RESPONSIBILITIES
• Perform product quality audits to assure compliance with customer, drawing, internal, and regulatory requirements
• Perform system audits in support of the Quality/Environmental Management System
• Coordinate close out of audit findings through, creating audits finding reports and determining proper corrective and preventive actions with the lead of the area being audited
• Coordinate needed actions to support continued ISO/AS9100 certification, preferred supplier status, and AS 9001 certifications (required for Government Quality Engineers)
• Provides liaison activities with customers and suppliers on all quality-related activities
• Review, identify, implement and maintain Customer Quality flow down requirements
• Perform review of bid and proposal quality clauses and provide compliance matrix
• Perform review of customer quality clauses, quality documents and provide compliance matrix
• Support Operations to ensure that products and processes comply with the relevant requirements of the quality management system
• Review trend analyses related to field returns, manufacturing rejects, supplier history, etc and provide recommendations for improvement
• Perform design review activities including inspectability, consistency, adequacy, accuracy, and conformance to customer requirements and provide recommendations for improvement
• Interfaces with all departments at all levels
• Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for internal and external customers
• MRB/ECN Board representation and duties
• Responsible for participating in continual improvement activities to enhance the quality system, such as 5S, Kaizen lean methods, etc
• Employs mistake-proofing techniques
• Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data
• Identify, implement and maintain Customer Quality flow down requirements
• Perform FAA Designee authorized functions
• Responsible for performing job duties in a manner consistent with established L-3 Ethics Standards
• Responsible for working in a manner consistent with established safety rules and regulations
• Performs job duties in accordance with approved procedures established in support of Sarbanes-Oxley regulations
Technical/Functional skills:
Education/Experience/Licenses etc.: MINIMUM REQUIREMENTS
• Bachelor’s degree in Mechanical or Electrical Engineering. Masters' preferred.
• 5 or more years’ experience as a Quality Engineer in Aerospace parts manufacturing as well as planning experience in an electronics manufacturing environment with some experience related to custom products.
• Knowledgeable of concepts, practices, policies/procedures, internal engineering, manufacturing and project management functions.
• Requires excellent oral and written communication skills, strong interpersonal skills. Ability to develop relationships with all levels of personnel.
• Familiarity with AS9100, D0-178, D0-254 and aviation regulations (required for Government Quality Engineers)
• Working knowledge of quality concepts and tools (i.e., six-sigma, TQM, QFD, SPC, SQC, DOE, ANOVA, etc.)
• Proficient with quality systems software and business desktop software programs
• Experience in quality analysis techniques (statistical analysis, problem solving, process mapping, SPC, Root Cause and CAPA process)
• Interact effectively with management, peers, and other employees relative to quality and technical issues.
• The individual must have demonstrated ability to work independently with minimum oversight and be proficient in MS Word, Excel, and PowerPoint, as well as with Minitab.
 
Job Location: Alpharetta, GA
Rate: 43-47/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Systems/Mechanical Test Engineer 4 / NX10 GD&T - Clearance CA

Description:
Sr Principal Systems/Mechanical Test Engineer 4 (Job Number: 19023934)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Nov 1, 2019

Target End Date: Oct 30, 2020

Pay Rate: $62 - $65

Work schedule: 4/10

Duration of Assignment: Up to 1 year


Selected candidates are expected to perform the following:

Test Engineer
• Mentor and lead less experienced Engineers thru all phases of Static, Fatigue / Structural Test lifecycle.
• Author and publish Test Procedures.
• Plan and arrange labor, schedules, and equipment required for testing and evaluating Flight and R&D hardware.
• Facilitate collaboration across disciplines during technical interchanges.
• Interpret Test Data, determine and suggest changes in test configuration, equipment, procedures or manufacturing processes.
• Collaborate with AVT personnel to develop test and test data requirements.
• Participate in post-test data evaluation and problem identification and resolution.
Designer/ Mechanical Engineer
• Mentor and lead design Team, review designs for compliance, technically and requirements.
• Lead and provide mentorship to less experienced Engineers during CDR / PDR.
• Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
• Evaluate design factors taking into account ease manufacturing, cost, safety, maintenance and end user.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
• Analyze damage tolerance, durability, design allowables and structural modeling

This position requires strong leadership, written and oral communications skills as well as a team centric approach to problem solving. Candidate must be able to work with little to no direction and be capable and willing to lead and oversee the work of less experienced engineers. Must work well in a large team environment as well as an individual contributor. Candidate must be self-motivated, detail oriented and must be willing to learn additional engineering discipline areas.


Basic Qualifications:

• STEM Degree with 9 yrs; 7 yrs. with Masters; 4 yrs. with PhD
• Must be able to obtain and maintain PAR
• Ability and willingness to work non-standard shifts/overtime
• CAD experience
• Willing/Capable of Learning NX10 and GD&T

Preferred Qualifications:

• Structural Test experience, Multiple disciplines
• Strong interpersonal and leadership skills
• Current PAR
• Extensive NX10 and GD&T experience
 
Job Number: JK-1796S5
Job Location: Palmdale, CA
Rate: 65/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer - Clearance NY

Description:
Request number: 6170
Job title: Sr. Design Engineer
Number of openings: 3
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 70/hr
Start Date: 09/23/2019
Tentative End Date: 09/21/2020

Job Description

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneurnatic components and systems that will become the new products of Moog, Inc. The incumbent plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Senior Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others.

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the Division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Senior Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department or he/she might report directly to the Chief Engineer. The incumbent requires guidance on general assignment objectives and critical issues, but he/she is expected to make independent and unreviewed decisions on most technical matters. His/Her work is periodically reviewed for application of sound professional judgment as it applies to meeting overall program and company objectives.

The Senior Design Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent's operating as a part of a design team will be responsible for the physical hardware design. He/She must oversee the efforts of drafting personnel and Assembly & Test Technicians. In this role he/she must be an inspirational leader, a creative problem solver, and must be sensitive to feedback from team members to identify and resolve problems before the design is released to production.

In the early stages of a new program, the Senior Design Engineer will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations.

During the design and development phase the Senior Design Engineer will initiate and carry out any analyses necessary to ensure the integrity and conformance of the design. These will include stress analysis, fracture mechanics, thermal analysis, and producibility analyses. The incumbent is responsible for selecting the materials, fits, heat treatment and finishes used in the design. He/She must be familiar with the properties and characteristics of materials and processes used in Moog hardware, and with all standards and requirements pertinent to the Division's industry, such as Military, FAA, and NASA specifications.

The Senior Design Engineer is responsible for actively communicating with the involved Division personnel who will be manufacturing hardware. He/She must frequently communicate with Reliability, Environmental Test, and Test Equipment Designers to keep them current on design status and ensure compatibility with their activities. Frequent consultation during both the proposal and design phases with the Manufacturing and Product Engineering personnel is crucial. Often these groups must be motivated and persuaded to consider novel or unorthodox methods of manufacture and test in order to preserve the simplicity or integrity of the design. The incumbent also must be sensitive to the expertise of manufacturing personnel, responding to their suggestions when appropriate. A delicate balance must be struck to achieve high producibility and cost effective parts and assemblies that satisfy quality and performance goals. The Senior Design Engineer is expected to provide the leadership and cooperation to ensure this happens.

The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

This individual will represent a high level of design problem solving in the Company. He/She must often act as a technical consultant for other programs both in development and in production. The incumbent must be able to communicate fluently to audiences representing a wide variety of skills, background, and disciplines. Travel, sometimes frequent, will be required to communicate with customer engineering groups. The Senior Mechanical Design Engineer's primary responsibility is the mechanical design of often complex servornechanisms, while that of the Senior Electrical Design Engineer is the design of complex electronic control hardware. In both cases this includes working with the customer to understand and define the design constraints, helping to write a winning proposal, conceiving novel mechanical or electrical solutions, performing design analysis, developing hardware, providing accurate and proper documentation of the design, and designing for producibility. He/She must be prepared to sell the features of the design and its implementations to both the customer and the division personnel who will be manufacturing and supporting the design.

To achieve the position of Senior Design Engineer, an individual will have at least a BS degree in electrical engineering with extensive experience in creating successful designs of electrohydraulic, electromechanical, mechanical and/or electropneurnatic servornechanisms and their control electronics. For a Senior Mechanical Design Engineer broad background in design analysis, including stress analysis, kinematics, strength of materials, fluid mechanics, and vibration is essential. Experience with closed loop systems, fluid power control, servornechanisms, fracture mechanics and Computer Aided Design is desirable. A Senior Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components. Most important is a proven record of accomplishments including successfully developed and produced designs and a demonstrated ability to participate in a product design team.

ACCOUNTABILITIES:

1. Develop new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume.

4. Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.

8. Consult on new product and market development efforts.

9. Maintain currency with materials technology, industry design requirements (Military, FAA, NASA, etc.), and modern design analysis tools.

10. When applicable supervise subordinate engineers and project/product engineering technicians.

Other Requirements
MUST have at least a BS in Electrical Engineering w/ 7-10 years of experience - not looking for FPGA

Sr. Design Engineer – Pre-Screen Questions
1. Please confirm if you have a verifiable Active Secret (Interim Secret is not sufficient) clearance.

2. Please describe your practice technical experience using the following:
a. Design of power supplies
b. Design of magnetics

3. Please describe your ability to perform detailed analysis of the following:
a. Small Signal analysis
b. Sneak Circuit analysis
c. Worst Case analysis
d. Timing analysis
e. Tolerance analysis
f. Power dissipation analysis
g. Radiation analysis
h. Stability analysis
 
Job Number: MB-6170S
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Controls Design Engineer

Description:
Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Define primary and secondary Flight Control System schematics and architecture
• Develop component level requirements derived from top level system requirements
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Review work performed by others and ensure work is to the highest standard.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.
• Leads or participates in design / development reviews with management and internal customers.
• The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must be familiar with Material Review Board processes.



Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with 10-15 years directly related experience
• MS / MBA with 8-13 years of experience OR 18-23 years directly related experience
• Some Travel will be required

Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Use of Team Center.
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP.
Ability to work in a constant state of alertness and safe manner.




The Structures Company is an AA/EOE.
 
Job Number: 300
Job Location: NC
Rate: $60-$72/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Liaison Engineer / no clearance LA

Description:
165822
Job Title: Staff Liaison Engineer (Job Number: 19021247)

Work Site Address: Lake Charles, LA 70612
Job Number: 1792
Max Pay Rate: 65.00-70.00
Start Date: 8/19/2019
End Date: 8/14/2020
Position Type: Contract

Staff Liaison Engineer

Client is searching for a Liaison/Material Review Board Engineer with experience in Supplier Management to work onsite at our Lake Charles, Louisiana Maintenance Facility.


Job Description:

This Engineer:

•Will be expected to review and comment on Repair dispositions created by the Client’s Technical Services, Engineering staff.
•Be able to suggest process improvements, and be able to discuss issues with Client’s management.
•Have experience with Programmed Depot Maintenance for aging metallic aircraft structure.
•Have experience with corrosion removal and mitigation.
•Have experience serving on a Supplier Management Team
•Work without direct onsite management oversight.


Qualifications and Education Requirements


Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 18 years of experience in design, fabrication, and/or repair of metallic airframe structures. Experience with depot maintenance of aging aircraft.


BS or MS in Mechanical or Aeronautical Engineering.
Material Review Board experience.
Excellent verbal and written communication skills
Ability to collaborate in a team environment and appropriately raise issues to upper management.
Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
Ability to comprehend and analyze complex problems and develop solutions
Experience with military specs and standards
Experience with maintenance of aging military aircraft
Experience interfacing with a military customer
Prior experience with Client’s military aircraft


5/40 work schedule
 
Job Number: JK-1792
Job Location: Lake Charles, LA
Rate: 65-70 DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis Engineer

Troy, OH
$65/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead. Prepare static and fatigue analyses in support of drawing releases, development of qualification test requirements, and documentation of stress analyses for Customer review and MRB support. All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Job Details:
Bachelor's degree or equivalent in mechanical/aerospace/structural engineering or related discipline with a minimum of 10 years of directly related stress analysis experience is required.
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods is required
• Clear understanding of external loads, load paths and development of component and system free body diagrams is required.
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows is required.
• Strong written and verbal communication skills is required.
• Prior experience with ABAQUS or ANSYS FEA is required.
• Strong understanding of aerospace materials is desired.
• Working knowledge of CATIA V5 is desired.
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter) is desired.
• Good understanding of manufacturing processes is desired.
• Strong interpersonal skills is desired.
 
Job Number: 10993
Job Location: Troy, OH
Rate: 65.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
POSITION SUMMARY:
The structures engineer performs design, documentation, and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Designs mechanics aircraft primary or secondary structures for VIP business aircraft.
2. Designs structural modifications and structural provisions.
3. Designs repairs for aircraft structure that are beyond the scope of repair documentation
4. Supports the integration of structural and systems installation components within the aircraft configuration.
5. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
6. Ensures designs meet customer criteria, quality standards and FAA requirements.
7. Review of service bulletins and airworthiness directives for applicability, and the generation of engineering documentation for the accomplishment of structural inspections and modifications.
8. Adheres to budget and project schedules.
9. Produces accurate designs and uses consultants when necessary.
10. May perform as functional “lead” for group on specific projects.
11. Assists in selection of components and materials to maintain aircraft configuration.
12. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. 2 – 4 years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design. SolidWorks or AutoCAD is preferred.
2. Must have top down modeling experience
3. Aviation background and aircraft interior experience preferred.
4. Must have analysis experience (tolerance or preliminary).
5. Knowledge of mechanical design and documentation standards.
6. Budget and project management experience required.
7. Ability to work independently and cross-functionally.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.



The Structures Company is an AA/EOE.
 
Job Number: 342
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structural Engineer

Location: Centennial, CO
Duration: 6 Months

Description:
This engineering function provides engineering design and systems integration for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics) and/or Ordnance Component/System design. This function develops sub-system and component designs and requirements to satisfy overall propulsion systems requirements. The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts. Generation of engineering drawings or changes as well as assembly and testing requirements is part of the job function.

Job Requirements:
A minimum of a bachelor's degree in Mechanical/Aerospace Engineering Discipline from an accredited university and 5 years of relevant job experience.

Preferred Qualifications:
Familiarity with fluids and thermodynamics designs. Familiarity with structural design. Proficient with mechanical design utilizing NX-11, Team Center, Model Based Engineering. Proficient with Microsoft Office platform tools and Project integration skills.
Propulsion-Ordnance System Design

Requires a bachelor's degree and 4 -8 years of experience (for external candidates only). Provides solutions to a wide range of difficult engineering/scientific problems. Solutions are imaginative, thorough, practical, and consistent with organization objectives. Contributes to the completion of specific programs and projects. Failure to achieve expected results would typically result in serious project delays. Works with minimal direction. Independently determines and develops approaches to problems. Work is reviewed upon completion for adequacy in meeting objectives. Receives guidance only on unusual or complex problems or issues.

Comments for Suppliers:
NX 11 is preferred, recent exp in either 10 or 9 is also acceptable. Team Center exp is a strong plus!
 
Job Number: 19-09020
Job Location: Centennial, CO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 9/3/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer (Secret Clearance)

Description:
Summary: •Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
•Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
•Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.
•Candidate may participate in on-site support at product manufacturing and integration sites.

Basic Qualifications: •5+ years of experience in aircraft mechanical design (will consider years of experience/education in lieu of degree).
•Experience designing composite aircraft structure.
•U.S. Citizenship is required.
•Active Secret Clearance required.
•The ability to obtain and maintain access to Special Programs.
Preferred Qualifications: •Bachelor of Science degree in STEM.
•Proficiency with NX solid modeling software.
•Proficiency with TeamCenter PLM software.
•Proficiency with FiberSim composite definition software.
 
Job Number: 1910104507
Job Location: Melbourne, FLA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Role: Structural Engineer
Location: Vandenberg AFB, CA
Duration: 6 months’ contract


Job Requirements:

• A minimum of a Bachelor's Degree in Mechanical/Aerospace Engineering
• Discipline from an accredited university and 5 years of relevant job experience.
• Requires a bachelor's degree and 4 -8 years of experience (for external candidates only).
• Provides solutions to a wide range of difficult engineering/scientific problems.
• Solutions are imaginative, thorough, practical, and consistent with organization objectives.
• Contributes to the completion of specific programs and projects.
• Failure to achieve expected results would typically result in serious project delays.
• Works with minimal direction.
• Independently determines and develops approaches to problems.
• Work is reviewed upon completion for adequacy in meeting objectives.
• Receives guidance only on unusual or complex problems or issues.

Preferred Qualifications:

• Familiarity with fluids and thermodynamics designs.
• Familiarity with structural design.
• Proficient with mechanical design utilizing NX-11/10/9 Team Center, Model Based Engineering.
• Proficient with Microsoft Office platform tools and Project integration skills.
 
Job Number: 50-1384
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer (Landing Gear)

Description:
The ideal candidate will:
• conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead.
• prepare static and fatigue analyses in support of drawing releases,
• develop qualification test requirements, and
• Document stress analyses for Customer review and MRB support.

All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. The Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Requirements:
• Bachelor's degree or equivalent in Mechanical / Aerospace / Structural Engineering or related discipline
• Minimum of 10 years of directly related stress analysis experience
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods
• Clear understanding of external loads, load paths and development of component and system free body diagrams
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows
• Strong written and verbal communication skills
• Prior experience with ABAQUS or ANSYS FEA

Desired Competencies:
• Strong understanding of Aerospace Materials
• Working knowledge of CATIA V5
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter)
• Good understanding of Manufacturing Processes
• Strong interpersonal skills
 
Job Number: 1910102322
Job Location: Independence, OH
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer 3 (Secret Clearance)

Description:
The ideal candidate will: •Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
•Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
•The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
•Tools utilized may include FEMAP, NX, and other software applications.
•Active Security Clearance

Basic Qualifications: •Bachelor of Science degree (ME/AE/CE) plus 5 years of experience in AEROSPACE Structural Analysis.

Preferred Qualifications:
•Knowledge of FEMAP and NX CAE.
•Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
•Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years.
 
Job Number: 1910102654
Job Location: Melbourne, FLA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Required Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10742
Job Location: Savannah, GA
Rate: $65.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Engineer

Description:
• Experience in metallic door structures and mechanism analysis is highly desired.
• Experience in support of design and development of mechanical systems is desired
• 5 years minimum aircraft stress experience required.
• Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
• Strong background in classical stress analysis required.
• Experience with Catia V5 to support stress analysis and drawing release required.
• Experience with FEM analysis methods a plus but not required
• Experience in workflow review and approval process is a plus.

Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Experience/Education:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-330
Job Location: Savannah, GA
Rate: $75 - $80
Per Diem: Yes
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Catia V5 V4 GD&T / 4 openings! - Clearance CA

Description:
164970
1574-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/4/2019
End Date: 6/2/2020

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Applicants must not have applied for Tool Design at LM-Palmdale in the last 6-mo.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly

Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1574-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11430
Job Location: Fort Worth, TX
Rate: $56.05/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11431
Job Location: Marietta, GA
Rate: $53.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years preferred****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 5-years of demonstrated professional experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication.
- Must be US citizen.
- Active/Final Secret clearance.

Desired:
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Active/Final Secret clearance with most recent investigation completed within the last 5-years.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.
 
Job Number: 10969
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance GA

Description:
166135 Job Title: Tool Designer

Work Site Address: Marietta, GA 30063
Located in Marietta Georgia, potential for 20% travel to Palmdale California.
Job Number: 2000-1
Start Date: 9/23/2019
End Date: 9/17/2020
Position Type: Contract

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Qualifications and Education Requirements
- Minimum of 8-years of demonstrated professional Tool Design experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.

Preferred Skills
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $52.34 Hourly

Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-2000-1S5
Job Location: Marietta, GA
Rate: 52.34/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance TX

Description:
166134 Job Title: Tool Designer

Work Site Address: Fort Worth, TX 76108
Located in Fort Worth Texas, potential for 20% travel to Palmdale California.
Job Number: 1999-1
Start Date: 9/23/2019
End Date: 9/17/2020
Position Type: Contract

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Qualifications and Education Requirements
- Minimum of 8-years of demonstrated professional Tool Design experience.
- Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of Geometric Dimensioning and Tolerancing.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.

Preferred Skills
- Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
- Significant CATIA-V4 experience.
- Experience in structural analysis and proficient in material selection/sizing.
- Experience in electro-mechanical/pneumatic/hydraulic systems design.
- Experience working in a fast paced, developmental environment.
- Experience writing technical reports and presenting technical data.
- MS-Office proficient.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $54.81 Hourly

Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years
 
Job Number: JE-1999-1S5
Job Location: Fort Worth, TX
Rate: 54.81/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer CATIA, W/Secret Clearance

Description:
*This is a full time, 1 year contract position located in Ft Worth, TX*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment including tools, dies, gauges, jigs, fixtures, and prototype model parts.



Required:

*7+ years’ experience in aircraft tool design/fabrication

*Active Secret Clearance, with reinvestigation within the last 5 years

*Strong experience designing using Catia V, generative shape, parts, assembly and draft of workbenches and fabrication using composite materials, cure, trimming, drilling, forming, welding, inspection and assembly.

*Good GD&T knowledge

*Engineering Degree



Preferred:

*Experience in structural analysis/material selection/sizing.

*Experience in electro-mechanical/pneumatic/hydraulic systems design
 
Job Number: 574
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Design Fabrication w/Secret Clearance EM

Description:
*This is a full time, 1 year contract position located in Palmdale, CA*



CSS Staffing is seeking a Tool Designer to design, develop and implement industrial machinery and equipment tools, dies, gauges, jigs, fixtures, and prototype model parts.

Required:
*Active Secret Clearance
*5+ years experience in manufacturing environment in tool design/fabrication
*Strong experience designing using Catia parts, shapes assembly and draft of workbenches
*Engineering Degree

Preferred:
*Experience with structures, materials, sizing of mechanical, hydraulic or pneumatics
*Aircraft tooling and composites experience
 
Job Number: 190
Job Location: Palmdale, CA
Per Diem: yes split
Duration: 1 year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Back to Advanced Job Search