Job Search Results

313 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:56PM Pacific Time by ContractJobHunter. )

Listings 1 - 313

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer - Contract AND Direct Position Available

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

Qualifications

Education, Work Experience, Certification and/or Licensure:
BS in an Engineering related discipline required, Master’s degree preferred
5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
Knowledge of FAR Part 23 or 25 regulations
Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
Knowledge of system modeling and analysis tools preferred



The Structures Company is an AA/EOE.
 
Job Number: 320
Job Location: NC
Rate: $125K - $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Harness Design Engineer

Description:
General Summary:
The Electrical Wiring Design Engineer will perform wiring design and integration tasks associated with the electrical systems of the aircraft.

Duties and Responsibilities:
Creates and maintains aircraft systems wiring diagrams, parts lists, and electrical harness drawings.
Develops wiring designs for aircraft electrical systems.
Prepares specifications drawings, process layouts and capacity planning.
Serves as subject matter expert (technical expert) for the following areas:
Electrical Wiring and Harness Design
Wiring standards and ‘best practice’ design
Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
Development of configuration managed, electrical harness design packages
Parts lists, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and harness drawing generation
Interpretation of system interface control data to conceptual schematics
Evolution of conceptual schematics into aircraft wiring information
Use of wiring design tool to generate wiring diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic systems
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Lightning, EMI, and HIRF considerations
Databus and digital equipment interface considerations

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Electrical Engineering or other directly related technical field from a four year college or university.
5 years of directly related work experience or 10 years of directly relevant experience may be considered in lieu of a bachelors’ degree.

Knowledge, Skills and Abilities:
Excellent understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level required.
Proficiency with Microsoft Office Suite.
Proficiency in ERP systems preferably SAP preferred.
Proficiency in Catia V5 and Teamcenter preferred.
Experience with IGE-XAO, Mentor Graphics, or other similar wiring design tool.
Experience with electrical harness routing and installation requirements a plus.
Ability to work independently as well as in a multi-functional team environment.



The Structures Company is an AA/EOE.
 
Job Number: 319
Job Location: NC
Rate: $58/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
JSG is hiring an Electro-Mechanical Design Engineer in Monrovia, CA.

Responsibilities:

Plan and execute a moderate design and documentation tasks such as Electro-mechanical design layouts and detail drawings, electronic packaging (sheet metal) design, bills of materials, assembly drawings, engineering release packages
Develop product structures and bills of materials for custom and standard products
Evaluate and execute document change requests then supply engineering documentation to ECO documentation clerks for entry into ERP system.
Create and update bills of materials
Must coordinate own efforts with others, but this is not a supervisory position.

Experience:

Hands-on experience in all areas of design and drafting including:
Creation and Maintenance of bills of material in the computerized database
Layout
Detail Drawing
Dimensioning
Checking
Experience using 3D tools, preferably SolidWorks
Basic engineering calculations used in design and drafting
2 years minimum experience in engineering department with formal engineering records and documentation control
Formal training and experience applying relevant ANSI standards to design and drafting documentation
2 years formal training in Electro-mechanical design and drafting
 
Job Number: 374345
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environment Effects (E3) Protection Engineer

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0003 on application.



Responsibilities:

Instruct team member on the review of documents about equipment/system
level Indirect Effects of Lightning(IEL)/High Intensity Radiated
Fields(HIRF)/EMC compliance verification.

Instruct the documentation and verification of system level IEL/HIRF tests.

Lead the team to conduct troubleshooting of electromagnetic interference
onboard.

Instruct aircraft level lighting/HIRF/EMC test verification.
Compile aircraft level E3 design requirements.
Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
Establish aircraft level E3 design and verification procedure.


Skills/ Qualifications / Experience Sought:

10+ years' experience in E3 protection design and verification of aviation
field and rich experience in type certification.

Experience in system level lightning and HIRF verification.

Experience in aircraft level E3 design requirement; intensive study in aircraft
electromagnetic protection technique.

Experience in electromagnetic protection for composite fuselage.

Education background in EMC, electromagnetic field and microwave,
electronic engineering or other relevant subjects.

Familiar with relevant design method and procedure of electromagnetic
protection for composite material aircraft. Participated in electromagnetic
protection design of relevant type. Civil aircraft project is preferred.

Familiar with airworthiness regulations of E3 for civil aircraft. Full
participation in the type certification credit procedure desired.

Master EM simulation and have experience of aviation program are
preferred.

Good communication and written skills in English.
 
Job Number: BHJOB28358_61
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician Maintenance I - Clearance KY

Description:
165240
Job Title: SCA_Electronics Technician Maintenance I

Work Site Address: Lexington, KY 40516
Job Number: 1692-1
Max Pay Rate: $26.57/hr
Start Date: 6/29/2019
End Date: 12/15/2019
Position Type: Contract


The Electronics Technician I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as building simple electronic equipment, fabricating wire harnesses and taking test readings using common instruments such as digital multi-meters, semiconductor testers. This person works under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy. Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools. and applicable test equipment. Experience in utilizing electrical test equipment such as digital multi-meters.


Skills
Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals

Qty 1 position needed

Work schedule 4/10
This is a C-Shift position working Thursday thru Sunday 0600 to 1630
 
Job Number: JE-1692-1S
Job Location: Lexington, KY
Rate: 26.57/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry-Level Aircraft Equipment Repair Technicians

Description:
STS Technical Services offers Entry-Level Aircraft Equipment Repair Technicians jobs in Hawthorne, California.
Job Duties:
Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
Comply with FAA and company policies and procedures
Ensure accurate and timely completion of work orders
Ability to perform routine and non-routine tasks independently
Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
Maintain safe and clean work environment
Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
Ensure system security of the electronic record keeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
Provide feedback/suggestion to improve customer satisfaction
Perform any other duties as assigned by the Station Manager/Supervisor
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36256
Job Location: Hawthorne, CA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Verilog/RTL Programmer [US Citizens only] (037)

Description:
*This is a full time, 1 year contract located in Santa Barbara, CA*

We seek an Electronic circuit design engineer who will be developing, testing, integrating and troubleshooting FPGAs. The effort will be mostly involved with FPGA programming, Verilog/RTL analog and digital designing, and simulation.

Required:
*4 years’ experience in circuit designing of FPGAs
*Experience in Verilog, RTL and analog/digital design
*Candidate may need a clearance after starting, which requires applicants to be US Citizens only.
*BSEE or related computer degree



Plus:
*Mixed signal design; high speed digital and RF circuit design experience
*Familiar with design reviews and flow downs
*Matlab or C++ programming experience
*Familiar with Test engineering and simulation tools.
 
Job Number: 037
Job Location: Santa Barbara, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_70
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
1389-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open
Submitted: 2/7/2019 5:08:41 PM

Qty: 1
Desired Start Date: 2/21/2019
End Date: 2/20/2020

Required experience:
Experience with SAP / GTS
Experience Classifying items previously not imported under HTSUS
Experience Reviewing current HTSUS classifications to vet or correct as needed
At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision
Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Position’s primary responsibilities will include assisting Import Control with classifying items pending import classification instructions, proactively classifying items currently in SAP GTS system not assigned US HTS, reviewing currently assigned HTS classifications and updating as necessary, remaining current with legislative changes in additional tariff classifications as well as scheduled updates/changes to HTSUS and maintaining necessary updates and notations in SAP/GTS, identifying and gaining access to proprietary information databases for the purposes of classification, evaluating and providing guidance on use of chapter 9801-9802 provisions, providing internal training on advanced classification topics. In addition, position may perform research and assist in determining eligibility for foreign trade agreements, determine participating government agency regulation, applicability of ADD/CVD regulations, partner with different internal groups to support project work.

• Classify items previously not imported under HTSUS
• Review current HTSUS classifications to vet or correct as needed
• partner with export classification specialist for project/assistance
• partner with other business units for projects as needed
• provide training to Import Control teammates
• Remain current in all additional specialized tariffs
• Partner with ITC and Brokerage firms to determine OGA status
• Maintain GTS HTS classifications, including additional regulations such as ADD/CVD, specialized tariffs, relevant binding rulings, and information specific to the product in GTS notes
• Potentially assist in evaluate FTA feasibility, work with programs to obtain necessary documentation, maintain yearly blanket documentation
• Potentially Maintain and provide to forwarders FTA blanket statements
• Potentially support B schedule import activities

Bachelor’s degree in legal, business management, or supply chain.
At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision

Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes.
Expertise in utilizing explanatory notes, published binding rulings, informed compliance publications, customs bulletins
Expertise in understanding Federal Code of Regulations Title 19 part 10 and 152 as it applies to requirements of classification and applying it to specific classification scenarios.
Experience in understanding detailed product literature and determining best contact group for clarification and additional details.
Previous work employed by an importer preferred.
Exceptional written and verbal communication skills.
Project management experience preferred.
Ability to work independently while integrating projects with wider team environment required.
High level of reading comprehension required.
Meticulous attention to detail.
Adept at working professionally with personnel of different knowledge, skill sets, and priorities required.
Experience with Microsoft Office suite required.
Experience with SAP / GTS preferred

Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly
 
Job Number: JE-1389-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Support the non-recurring manufacturing activities on the IRST program. The individual will be responsible for the development of manufacturing work instruction and tooling necessary to build circuit cards and Cables/harnesses in a production environment.

Mandatory Experience in the electronics field directly supporting the documentation development to support the build of hardware. Hands on experience in either circuit card or Cable and Harness build, tooling development and work instruction.

Desired Experience with SAP
 
Job Number: 47007
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: $50
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Fort Worth, TX
Rate: $59.92/HR
Duration: 5 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This position is for a flight test mechanical design engineer.
2. The selected candidate will support the Integrated Fighter Group (IFG) Flight Test team working on F-16 and F-22 aircraft.
3. The candidate will be required to perform mechanical design activities for the installation of flight test equipment and data system components.
4. The candidate will be responsible for releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operations.

Responsibilities for this position include:
1. Development, installation oversight, and validation of 3D CATIA flight test mechanical designs.
2. Coordination with suppliers, internal and external integrated product teams, management and the customer.
3. Technical engineering support for installation and testing at CONUS and OCONUS locations.
4. Engineering liaison for flight test and instrumentation modification activities.
5. Produce and read engineering drawings, schematics and technical procedures
6. Develop troubleshooting plans and discrepancy resolution

Required Qualifications:
1. Bachelor’s degree with 9 years of professional experience; or 7 years of professional experience with a Master’s degree
2. Experience with CATIA V5 or V4
3. Development, installation oversight, and validation of 3D CATIA flight test mechanical designs

Desired Skills:
1. Experience in flight test mechanical design
2. Understanding of sensor technology utilized in the test of aircraft structures (loads and vibration) and vehicle subsystems (environmental control systems, flight controls, propulsion, and aerodynamics).
3. Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors.
4. Familiarity with fighter aircraft technical data, maintenance practices, flight operations, and weapons
5. Understanding of aircraft avionics subsystems and electronic bus architectures including 1553, Ethernet, and Firewire protocols
6. Good communication and people skills with the ability to work in a diverse engineering and technician team environment
 
Job Number: 11154
Job Location: Fort Worth, TX
Rate: $59.92/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
This position is for a flight test mechanical design engineer. The selected candidate will support the Integrated Fighter Group (IFG) Flight Test team working on F-16 and F-22 aircraft. The candidate will be required to perform mechanical design activities for the installation of flight test equipment and data system components. The candidate will be responsible for releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operations.

Responsibilities for this position include:

• Development, installation oversight, and validation of 3D CATIA flight test mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for installation and testing at CONUS and OCONUS locations.
• Engineering liaison for flight test and instrumentation modification activities.
• Produce and read engineering drawings, schematics and technical procedures
• Develop troubleshooting plans and discrepancy resolution

Must be a U.S. citizen. This position will require a government security clearance.

Basic Qualifications:
• Bachelor’s degree with 9 years of professional experience; or 7 years of professional experience with a Master’s degree
• Experience with CATIA V5 or V4

Desired Skills:

• Experience in flight test mechanical design
• Understanding of sensor technology utilized in the test of aircraft structures (loads and vibration) and vehicle subsystems (environmental control systems, flight controls, propulsion, and aerodynamics).
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors.
• Familiarity with fighter aircraft technical data, maintenance practices, flight operations, and weapons
• Understanding of aircraft avionics subsystems and electronic bus architectures including 1553, Ethernet, and Firewire protocols
• Good communication and people skills with the ability to work in a diverse engineering and technician team environment
 
Job Location: Fort Worth, TX
Rate: 45/hr
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*Two openings; both 9+ years’ experience in (1) electronics wire harness design and (1)Airframe structural design specialist using CATIA V5

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Ability to resolve problems and non conforming parts disposition, root cause analysis

*Per diem split is available for those travelling for this position

*Must have an Active Interim or Secret Clearance (and reinvestigated in last 5 years)

*Engineering Degree



Pluses:

*Experience designing using composites

*Siemens Fibersim experience
 
Job Number: 89
Job Location: Palmdale, CA
Duration: 1year or more
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Microelectronic Technician CA

Description:
Microelectronic Technician (Job Number: 19016881)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 2nd Shift

Target Start Date: Jul 29, 2019

Target End Date: Jul 24, 2020

Pay rate:$20.00

Location: Manhattan Beach, CA

Work schedule: 9/80 2nd shift

Duration of assignment: Up to 1 year

Position Summary / Responsibilities
Performs a variety of duties to support the research and development of new microelectronic, opto-electronic, micro-electromechanical and sensor manufacturing processes, devices, components, or systems, semiconductors, semiconductor-based integrated analog or digital circuits, micro-electromechanical systems, sensors systems, and related technologies. Develops and applies inspection and test procedures for micro-components and micro-systems.


Qualifications

Basic Qualifications: High School diploma or equivalent and 0 years additional education and/or related experience
 
Job Number: JK-1776
Job Location: Manhattan Beach, CA
Rate: 20/hr max
Per Diem: no
Overtime: 2nd Shift
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3) years of machining, planning, tool design, or related manufacturing experience.

Position Purpose:
1. Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions:
1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
5. Develop operator set-up sheets for numerical control machines.
6. Develop flat pattern mylars and templates as required.
7. Produce 2-D Catia tool drawings as required.

Additional Functions:
1. May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
2. Assist in formulating Numerical Control policies, procedures, and specifications as required.
3. Perform other duties as assigned.

Other Requirements:
1. Good verbal and written communication skills required.
2. Must be able to read and interpret blueprints.
3. Familiarity with various machining methods, technical writing, and computer use.
4. Must possess good drafting, math, and geometry skills.
5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 11064
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer II

Description:
NC Programmer II

Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements:
• Good verbal and written communication skills required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 24-363
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Ability to analyze large data sets from a reliability perspective and identify high drivers.Ability to perform reliability tasks such as allocation, predictions, FMECA and FRACAS.Ability to use reliability and office software tools to perform reliability analyses.Ability to understand and analyze mechanical, electrical, electronic and hydraulic engineering concepts.

Familiarity with WQS reliability software.

Familiar with other Specialty RAM-T disciplines.

ASQ Certified Reliability Engineer
 
Job Number: 47008
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Senior Mechanical Hydraulic Design and Analysis Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0007 on application.




Our Client's Mechanical Systems team is looking for
innovative engineers to join the team in defining and integrating the
Hydraulic Systems and components into our current and future
commercial airplane product lines. Their organisation has design,
analysis, and certification responsibility for Hydraulic Power system,
Hydraulic Conveyance system, Landing Gear and Brake Actuation
systems, Flight Control actuation systems and Systems Control
Electronics for all current and future aircraft models.

Position Responsibilities:

Work to ensure world-class Hydraulic Systems equipment by
collaborating with other organisations such as Aerodynamics
Performance and Stability & Control, Structures, Flight Deck Crew
Operations, Pilots, Electrical Systems, Systems Stress, Customer
Services & Airline Customers, Manufacturing, Flight Line
Operations, Supplier Management, Airplane Safety and many others.

Developing and validating requirements and interface definitions.
Creating new detail design.
Conducting various types of analysis and/or simulations, use of CAD
systems such as CATIA V5, and math modelling with tools such as
Simulink, Matlab, and EASY5.

Verifying designs and performance via component, system-level and
airplane-level testing.

Participate in design reviews and engage in supplier coordination.
Participate in activities related to certification of our client's products
with regulatory agencies.

Experience and Qualifications:


Candidate must possess specialised experience designing mechanical
components and assemblies, including latches, hinges, door
mechanisms, locks, articulating bracketry, valves, pumps and/or
actuators.

Degree and typical experience in engineering classification:

Bachelor's and 15 or more years' experience, Master's with 12 or more
years' experience or PhD with 10 or more years' experience.
Bachelor,Master or Doctorate of Science degree from an accredited course of
study, in engineering, computer science, mathematics, physics or
chemistry.

Working experience with major airframers or major hydraulic components / systems suppliers such
is preferred.

Fluent English, with good communication skills.
 
Job Number: BHJOB28358_57
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 1

Description:
Software Engineer - Level 1

Riverside, CA
$24/hr
8 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Supports multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software.

This employee will support the update of several automated visuals throughout the shop floor. This person will receive instruction from a seasons software engineer.

Programing in Python, electron, Java, and Java Script preferred.
 
Job Number: 11149
Job Location: Riverside, CA
Rate: 24.00
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer (Aerospace Electronic Control Units)

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for Aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities
• Primary ownership of Systems Development Processes.
• Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
• Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
• Assess design maturity and review technical risk.
• Participate in Component Design reviews.
• Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
• Support project planning efforts and ensure execution to schedule and budget.
• Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change
• Hardware Verification experience including, test procedure development, robustness testing and debug
• Systems Verification experience including, test procedure development, robustness testing and debug
• Experience with configuration management and problem reporting tools
• Experience developing hardware/software integration plans
• Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
• Excellent written and verbal skills

Preferred Qualifications
• Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Experience using Mentor Graphics DxDesigner and Expedition
• Masters’ degree in Electrical Engineering
• Experience with high reliability controller electronics and power switching circuitry
• Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 1 year
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.

The role will involve:
• requirements definition using DOORS or structured modelling,
• detailed design,
• code implementation using embedded C,
• validation of requirements and
• verification of implementation.
• managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications
• 6+ years’ experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 1910103342
Job Location: Phoenix, AZ
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Phoenix, AZ
$68/hr
12 month W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
• 6+ years experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 11111
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer IV

Description:
The Structural CAD Designer will prepare predominantly civil, structural and architectural detail drawings. Will work with Structural Engineers to produce drawings required to perform structural modifications to new and existing launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification contracts.

He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

The candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.

Experience/Skills Required
•The successful candidate should have at least (10) years of relevant experience building and/or modifying large industrial facilities.

•At least (10) years of recent Autodesk AutoCAD experience.
•3D modeling and design experience in Autodesk Inventor, Autodesk Revit Structure, Tekla Structures, or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 320
Job Location: Cap Canaveral, FL
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural engineer1

Description:
Basic Qualifications:
0 Years with Bachelors in Science in an Engineering discipline (i.e., Civil Engineering, mechanical Engineering, Naval Architecture, Ocean Engineering Aeronautical Engineering)
Preferred Design Disciplines:
Finite Element Analysis and Hull Scantling Analysis experience
Job Description:
Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
 
Job Number: 07012019-10Z
Job Location: Pascagoula, MS
Rate: $35
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: today
Input Date: 11/14/2020
Firm Name: TASC TECHNICAL SERVICES
Attention: Mark
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Level Test Engineer (Advanced Electrical Instrumentation and Data Acquisition Systems)

Description:
The ideal candidate will have solid electronic component troubleshooting and test skills, including digital motor controllers, brushless DC motors, FPGAs and VHDL experience. They should also have component circuit board level testing and troubleshooting, test procedure writing and requirements distillation experience.

The candidate will:
•design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques.
•take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
•this can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include:
•the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
•daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
•Support laboratory testing of Space hardware,
•Develop and validate tooling concepts,
•Author and maintain operation/test procedures,
•Prepare standardized operation/test sheets,
•Define test rig and facility requirements,
•Participate on program Integrated Product Development teams,
•Review drawings and concepts, and
•Resolve productivity concerns.

Required:
•Experience with Advanced Electrical Instrumentation and Data Acquisition Systems
•Five (5+) years working on the testing of complex electrical systems,
•Testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers,
•Testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
•Applicant must have the capability of working independently and be self-motivated.
•Excellent communication skills, written and verbal.
•Ability to proficiently operate common Microsoft Office software products

Desired •Knowledge of LabVIEW desired.
 
Job Number: 1910100496
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician VA

Description:
165324 Test Technician

Work Site Address: Chesapeake, VA 23323
Job Number: 9292141
Max Pay Rate: 25.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Under Limited supervision performs a wide variety of technical efforts including processes, tests, troubleshoots, and repairs digital equipment. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks. May work on Analog, Digital and/or video type circuits, Radio Frequency, and logic systems. Observes, analyzes and reports test data. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks.

Knowledge, Skills and Experience:
• 4-6 Year Experience testing Analog, Digital and RF circuitry. Ability to read and interpret drawings to perform measurements and troubleshoot electronic equipment. Strong problem-solving skills with the ability to proactively identify alternate solutions to overcome technical challenges.
• Experience using a wide variety electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers.
• Must be familiar with various test equipment general purpose and special, program specific test stations, misc. measuring devices.

Required Education:
High School or equivalent

Work in industrial environment.
• Able to lift 35 lbs unassisted.
 
Job Number: MB-R9292141ATO
Job Location: Chesapeake, VA
Rate: 25/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search