Job Search Results

313 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/21 Wednesday 05:17PM Pacific Time by ContractJobHunter. )

Listings 1 - 313

Go To My Job Tracker

Expand all descriptions

AES-Electrical Engineer

Description:
PDS Tech, Inc. is seeking an AES-Electrical Engineer in Wichita, KS

Responsibilities: 

• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (IAI HarnesSYS). 

• Perform analysis requiring frequent application of engineering principles. 

• Will write technical descriptions of subject matter pertinent to design or test requirements. (Descriptions of supplier parts, test or rigging specifications, etc.) 

• Prepare functional test documents for avionics and electrical systems. 

• Prepare certification documentation including certification plans, ground and flight test plans and certification reports showing avionics and electrical systems compliance with 14 CFR Part 25. 

• Will prepare, evaluate, and analyze avionics and electrical system design for completion of function hazard assessments and system safety assessments.
Position Requirements: 

• Minimum of 5 years of experience in aerospace industry. 

• Previous experience with Part 25 Type Certification (TC) projects is required. 

• Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is required. 

• Experience with the design, development, and certification of an integrated Avionics Flight Deck is required. Experience with the design, development, and certification of the Garmin Integrated Flight Deck is strongly desired. 

• Electronic drafting experience with IAI HarnesSYS electrical design program is desired. 

• Strong computer, written and verbal communication skills required. 

• Time management skills are required to work multiple concurrent projects of various size and scope. 

• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired. 

• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus. 

• Design knowledge of EWIS (CFR 14 Part 25 17.XXXX) is desired. 

• Design knowledge of DO-160, DO-178, and DO-254 is required. 

• Design knowledge of ARP-4761 and ARP-47545A is required. 

• Experience with Head Up Display or Enhanced Vision System is considered a plus.

Education: 

• Bachelor of Science in Electrical Engineering, Computer Engineering or Electrical Engineering Technology from an ABET accredited institution is required. 
 
Job Number: 1910103571
Job Location: Wichita, KS
Duration: 9 months
Input Date: 06/14/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQVcQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Accountant

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Accountant
(U.S. Citizenship Required*)
Hazelwood, MO
2019-9033
Responsibilities:
• Support projects that move processes into the next generation using technology including Artificial Intelligence and Machine Learning while applying creative problem solving skills.
• Test of system changes as needed and make recommendations for improvements.
• Assist with maintaining and documenting effective internal controls and processes.
• Work with the team to identify accounting system issues.
• Support internal and external auditors related specifically to job function.
• Assist with reviewing and analyzing relevant accounting source documents.
• Assist with reviewing and analyzing company directives to guide and make recommendations regarding accounting policies and practices in regards to finance systems.

Qualification:
• Must successfully pass a credit check
• Analytical, and detail oriented
• Must have audit experience.
• Must have technical, communication, and creative skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree
• Experience with electronic travel and business expense reporting systems or other finance system experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9033
Job Location: Hazelwood, MO
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Avionics Certification Engineer

Description:
Support the verification and test of high-performance Avionics hardware and systems.
• Perform system and component-level avionics requirements validation and verification
• Document failure mode, effects, and critical analysis (FMECA) cases and pursue corrective actions
• Write and update technical documentation for certification
• Capture and communicate technical risks and waivers
• Analyze test and flight data, to help with verification activities
• Detailed electronics design and analysis experience
• Experience with DO-160, MIL-STD-1540, or SMC-S-016 Environmental test standards
• Familiarity with ARP4754A, DO-254 and DO-178 and related Design processes
• Experience / exposure to IBM DOORs tool
 
Job Number: 4545
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 05/02/2019
Last Updated: 08/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Tech I

Description:
PDS Tech is seeking Avionics Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:

1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting.
2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability.
7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:



A&P/FCC/NCATT preferred. Troubleshooting experience preferred. Must be willing to work any shift.


 
Job Number: 1910100665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/02/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cefQAA&URLSource=cjhunter

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

Avionics/Elec Tech II

Description:
PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:

  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 

Additional Functions:

  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • A & P license, FCC license or NCATT certification preferred.
  • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.



 

  


 


 
Job Number: 1910102788
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/04/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jFeQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.

 

Unique Skills:



G650 experience preferred.



 


 

 
Job Number: 1910101665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/30/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101164
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0dQAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101165
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0iQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Combat Vehicle Mechanic Retrofit

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Combat Vehicle Mechanic Retrofit
(U.S. Citizenship Required*)
Ft. Lewis, WA
2019-9027

Responsibilities:
• Perform scheduled and unscheduled maintenance, troubleshooting, repair and retrofit (improve invulnerability and survivability) on the Army Stryker family of vehicles (FOVs) or components pursuant to applicable contracts within the organization
• Scheduled maintenance: Periodic and preventative manufacturer (in accordance with the IETM) required maintenance to extend the life of the vehicle and/or performing upgrades as mandated during a designated period of time by customer.
• Unscheduled maintenance: The emergent, corrective or restorative maintenance requirements not previously planned or programmed but require prompt attention and must be added to, integrated with, or substituted for previously scheduled workloads.
• Troubleshoot: Systematically identify issues and problems within the complex mechanical systems, electronics, computers and software systems within the Stryker family of vehicles.
• Meet safety requirements with OSHA, ANSI and ASME industrial standards, compliance and technical training, administrative duties to meet contract obligations and organizational requirements, adhering to Federal Acquisition Regulation (FAR) compliance.
• Other duties as may be required/ assigned.

Qualifications:
• Occasional work in confined space within vehicle interior.
• Work in improved and unimproved maintenance facilities as well as field environment.
• Able to work independently with minimal supervision and organize/prioritize multiple tasks.
• Must be able to foster and enhance teaming environment
• Working knowledge with Microsoft Office software including Word, Excel, Power Point, Access and Lotus Notes preferred
• Proven ability to perform multiple tasks within multiple work stations.
• Demonstrated good housekeeping skills and ability to convey such practices to team members.
• Able to work extensive extended hours in a fast paced, challenging, high pressure environment.
• Must be able to gain and maintain access to Joint Base Lewis McChord and other military bases assigned to
• Must meet and maintain ASR guidelines for driver's station entry as described in Standard Practice 2-644
• Able to maintain US Passport required
• Able to be issued and maintain a Class B CDL
• Able to be issued and maintain company AMEX card required
• Must be able to gain and maintain access to all military installations in which the work is performed
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required, combined with 3+ years mechanic experience
• Maintenance on tactical/combat vehicles preferred (- 91B, 91S, 63S, 63W or 63B MCM or USMC MOS' 2147, 3521, 3522, 3524) Experience on Stryker, LAV 2.5 or LAV III desirable.
• Documented commercial training and/or experience acceptable in lieu of military vehicle experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9027
Job Location: Ft. Lewis, WA
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer in Hazelwood, MO.

Summary:

  • Works with customers to develop and document complex electronic and electrical system requirements.
  • Analyzes and translates requirements into system, hardware and software designs and interface specifications.
  • Tests and validates to ensure system designs meet operational and functional requirements.
  • Monitors supplier performance to ensure system integration and compliance with requirements.
  • Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
  • Researches specific technology advances for potential application to company business needs.
  • This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems.
  • Ability to analyze complex electrical and mechanical subsystems is essential.
  • You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
  • You will work with the latest generations of aircraft platforms (both commercial and military).
  • You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate).
  • You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation.
  • The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts.
  • The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts.
  • The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

Prerequisites:
  • Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
     

 
Job Number: 1910103194
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/14/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033kExQAI&URLSource=cjhunter

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 179848
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 06/12/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Development Engineer

Description:
The Product Development and Releasing Coordinator is responsible for coordinating the development and validation efforts of the electric vehicle power electronics and electrified vehicle systems/devices for passenger cars and trucks. The Engineer will be responsible for develop efficient and cost effective power electronics using cutting edge technologies, the latest test and evaluation equipment/laboratory, and robust simulation tools. Coordinate with test facilities, cross functional teams, such as dyno, bench, vehicle, integration team, calibration team and the suppliers on power electronic devices DVP & R. Work with supplier and internal component logistics.  Coordinate and carry out all required development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals.  Report or present progress and status to the validation and development in management review meetings.

 

 
Requirements:
* Bachelor of Science in Electrical Engineering
* Minimum of 2 years' experience in electronics and circuit design and/or development
* Have understanding of power electronics and devices
* DVP&R and DFMEA creation & execution experience
* Great communication skills
* Strong project management and time management skills
* Good analytical and problem solving skills
* Understanding of Electrical Engineering standards/protocols, and of power electronics/devices * Highly motivated and self-starter
* Demonstrated ability to work in a team environment
 
Preferred Qualifications:

* Master of Science in Electrical Engineering
* 2-5 years of experience
* Power electronics / electrical models, simulation experience, and FEA
* Power electronics specifications expertise
* Electric motor & powertrain controls experience
* Design and release experience
* Strongly prefer previous hybrid / high voltage experience
* Experienced with supplier program management.
 

 
Job Number: 1910103069
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jyUQAQ&URLSource=cjhunter

E-Drive Integration Engineer

Description:
PDS Tech, Inc. is seeking an E-Drive Integration Engineer in Auburn Hills, MI.

Summary:

  • E-Motor hubs packaging verification, and release for prototype and production to specific customer applications.
  • Verifies torque control, power management, and thermal management of the E-Motor hubs and e-drive system.
  • Testing and validation of motor control and motor sensor subsystem requirements.
  • Diagnoses and corrects deficiencies in designs and prototypes.
  • Understands test machine requirements and instrumentation.
  • Support for motor control and motor sensing subsystem analysis, modeling, and design.
  • Design and optimizes the e-drive system including packaging and development of CVT in cooperation with the supplier.
  • Dynamic lean design and optimization
  • Designs and optimizes simultaneous system performance goals through requirements flow down.
  • Effectively integrates all aspects of a design using multi-disciplinary engineering.
  • Understands and creates system and subsystem specifications.
  • Assists in maintaining cost controls.
  • Familiar with preliminary analysis and simulation to detect stresses conditions on subsystems and on component design level.
  • Experience with design, development, validation and integration.
  • Basic skills in analysis and simulation parameters to set up through the CAD models. Familiar with the mains manufacturing processes: sand casting, die casting, injection plastic components, sheet metal forming, gravity casting.

Qualifications / Education:
  • BS in Electrical Engineering or Mechanical Engineering required with emphasis in electric machines and drives, magnetic sensing subsystems, embedded systems, and/or electromagnetics preferred.
  • Five years’ experience working with e-drive systems.
  • Strong computer skills and knowledge of design and simulation tools (e.g. Catia V5, NX,) is required.
  • Able to generate 3D math models and 2D prints for complex parts.
  • General competency in all core fields (electronics, electromagnetics, computer hardware and software) is preferred.
  • Excellent problem-solving techniques.
  • Knowledge of system synthesis, analysis and verification techniques.
  • Good organization and documentation abilities.
  • Must be able to view a computer screen or monitor for extended periods of time.
  • Must be able to sit or stand for extended periods of time.

 
Job Number: 1910102061
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/07/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjZQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Manufacturing Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Electrical / Manufacturing Engineer
(US Citizenship Required*)
State College, PA
2019-9080

Responsibilities:
• Provide manufacturing / electrical engineering support to new and existing product lines
• Assist in the design and refinement of new and existing products
• Assist in the setup of production assembly processes and flow
• Performs electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
• Participates in internal electrical reviews of electrical components, equipment and systems
• Supports the generation of technical documents for use on the manufacturing floor
• Participates in the selection of components and equipment based on analysis of requirements
• Lead and participate in continuous improvement projects
• Develop fixtures and tooling as needed

Qualifications:
• Clear understanding of electronics manufacturing processes
• Clear understanding of electrical engineering concepts, principles, and theories
• Ability to use engineering design software and CAD tools
• Clear understanding of Microsoft Office applications
• Clear written and verbal communications skills
• Able to recognize and clearly report information relevant to sound engineering design
• Able to work well in a team environment
• Able to develop innovative methods and solutions
• Able to be adaptable and flexible
• Some travel may be required
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Electrical Engineering, a related specialized area or field, or equivalent experience is required
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9080`
Job Location: State College, PA
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Systems Design Engineer - Contract AND Direct Position Available

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

Qualifications

Education, Work Experience, Certification and/or Licensure:
BS in an Engineering related discipline required, Master’s degree preferred
5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
Knowledge of FAR Part 23 or 25 regulations
Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
Knowledge of system modeling and analysis tools preferred



The Structures Company is an AA/EOE.
 
Job Number: 320
Job Location: NC
Rate: $125K - $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/12/2019
Last Updated: 08/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Technician 2

Description:
Chipton-Ross is seeking an Electrical Technician 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

REQUIRED EXPERIENCE:
Integrated Circuit Layout Technician.
Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10
Full-Time

 
Job Number: 179458
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 05/22/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Harness Design Engineer

Description:
General Summary:
The Electrical Wiring Design Engineer will perform wiring design and integration tasks associated with the electrical systems of the aircraft.

Duties and Responsibilities:
Creates and maintains aircraft systems wiring diagrams, parts lists, and electrical harness drawings.
Develops wiring designs for aircraft electrical systems.
Prepares specifications drawings, process layouts and capacity planning.
Serves as subject matter expert (technical expert) for the following areas:
Electrical Wiring and Harness Design
Wiring standards and ‘best practice’ design
Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
Development of configuration managed, electrical harness design packages
Parts lists, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and harness drawing generation
Interpretation of system interface control data to conceptual schematics
Evolution of conceptual schematics into aircraft wiring information
Use of wiring design tool to generate wiring diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic systems
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Lightning, EMI, and HIRF considerations
Databus and digital equipment interface considerations

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Electrical Engineering or other directly related technical field from a four year college or university.
5 years of directly related work experience or 10 years of directly relevant experience may be considered in lieu of a bachelors’ degree.

Knowledge, Skills and Abilities:
Excellent understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level required.
Proficiency with Microsoft Office Suite.
Proficiency in ERP systems preferably SAP preferred.
Proficiency in Catia V5 and Teamcenter preferred.
Experience with IGE-XAO, Mentor Graphics, or other similar wiring design tool.
Experience with electrical harness routing and installation requirements a plus.
Ability to work independently as well as in a multi-functional team environment.



The Structures Company is an AA/EOE.
 
Job Number: 319
Job Location: NC
Rate: $58/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 08/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
JSG is hiring an Electro-Mechanical Design Engineer in Monrovia, CA.

Responsibilities:

Plan and execute a moderate design and documentation tasks such as Electro-mechanical design layouts and detail drawings, electronic packaging (sheet metal) design, bills of materials, assembly drawings, engineering release packages
Develop product structures and bills of materials for custom and standard products
Evaluate and execute document change requests then supply engineering documentation to ECO documentation clerks for entry into ERP system.
Create and update bills of materials
Must coordinate own efforts with others, but this is not a supervisory position.

Experience:

Hands-on experience in all areas of design and drafting including:
Creation and Maintenance of bills of material in the computerized database
Layout
Detail Drawing
Dimensioning
Checking
Experience using 3D tools, preferably SolidWorks
Basic engineering calculations used in design and drafting
2 years minimum experience in engineering department with formal engineering records and documentation control
Formal training and experience applying relevant ANSI standards to design and drafting documentation
2 years formal training in Electro-mechanical design and drafting
 
Job Number: 374345
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 06/20/2019
Last Updated: 07/17/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environment Effects (E3) Protection Engineer

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0003 on application.



Responsibilities:

Instruct team member on the review of documents about equipment/system
level Indirect Effects of Lightning(IEL)/High Intensity Radiated
Fields(HIRF)/EMC compliance verification.

Instruct the documentation and verification of system level IEL/HIRF tests.

Lead the team to conduct troubleshooting of electromagnetic interference
onboard.

Instruct aircraft level lighting/HIRF/EMC test verification.
Compile aircraft level E3 design requirements.
Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
Establish aircraft level E3 design and verification procedure.


Skills/ Qualifications / Experience Sought:

10+ years' experience in E3 protection design and verification of aviation
field and rich experience in type certification.

Experience in system level lightning and HIRF verification.

Experience in aircraft level E3 design requirement; intensive study in aircraft
electromagnetic protection technique.

Experience in electromagnetic protection for composite fuselage.

Education background in EMC, electromagnetic field and microwave,
electronic engineering or other relevant subjects.

Familiar with relevant design method and procedure of electromagnetic
protection for composite material aircraft. Participated in electromagnetic
protection design of relevant type. Civil aircraft project is preferred.

Familiar with airworthiness regulations of E3 for civil aircraft. Full
participation in the type certification credit procedure desired.

Master EM simulation and have experience of aviation program are
preferred.

Good communication and written skills in English.
 
Job Number: BHJOB28358_61
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Electronic Systems Design & Analysis Engineer 3

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374108
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/13/2019
Last Updated: 08/21/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician Maintenance I - Clearance KY

Description:
165240
Job Title: SCA_Electronics Technician Maintenance I

Work Site Address: Lexington, KY 40516
Job Number: 1692-1
Max Pay Rate: $26.57/hr
Start Date: 6/29/2019
End Date: 12/15/2019
Position Type: Contract


The Electronics Technician I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as building simple electronic equipment, fabricating wire harnesses and taking test readings using common instruments such as digital multi-meters, semiconductor testers. This person works under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy. Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools. and applicable test equipment. Experience in utilizing electrical test equipment such as digital multi-meters.


Skills
Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals

Qty 1 position needed

Work schedule 4/10
This is a C-Shift position working Thursday thru Sunday 0600 to 1630
 
Job Number: JE-1692-1S
Job Location: Lexington, KY
Rate: 26.57/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/17/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Test Technician

Description:
Chipton-Ross is seeking 2 Engineer Test Technician in Tempe, AZ.

RESPONSIBILITIES:

" Assist in building Specialized Test Equipment for testing product.
" Run tests on products and report results.
" Debug and fix what's broken, from component to system level.
" Assist in writing documentation, such as Assembly Drawings, BoM's, Wiring Diagrams, ATP's, etc..
" All the while interfacing with employees spanning the company from corporate quality to manufacturing to production to development and much more!

REQUIRED EXPERIENCE:
" 2+ years of related experience working in the electronics field.
" Experience testing electronic products.
" Ability to read schematics and understand electronic circuits.
" Familiarity with common test equipment and troubleshooting methods.
" Ability to follow a test procedure and complete necessary paperwork.
" Good working knowledge of MS Office for documentation creation, and modification
" Associate's degree in a technical discipline or equivalent experience
" US government position. US citizenship required.
" Up to 10% domestic travel

Preferences
" Hands on experience setting up and working with RF test set ups.
" Experience with Environmental tests such as vibration and thermovac.
" Experience using Spectrum Analyzers, Network Analyzers and RF test equipment.
" Experience RF transmitters, RF receivers, and amplifiers.
" Ability to debug product and test station failures down to component level.

WORK SCHEDULE:
2nd and 3rd Shift
 
Job Number: 179869
Job Location: Tempe, AZ
Rate: $25.5 to $35.00 DOE
Duration: 3 Months
Input Date: 06/14/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Engineering Technician

Description:

PDS Tech is seeking an Engineering Technician in Phoenix AZ
 
The Engineering Technician must have an Associate Degree in Electronic Technologies or equivalent.
 
The Technician must have experience in:



  • Troubleshooting circuits to the component level,
  • Performing testing on LRU and circuit cards,
  • Writing test and failure reports,
  • Operating custom and commercial off the shelf test equipment.
  • Designing test fixtures.


 
Other tasks include some rework of circuit cards, building cables and performing calibration activities.
 
Must have knowledge of Manufacturing processes.
 
Some weekends and second shift may be required.

 


 Education:
  • Associates Degree.

 
Job Number: 1910103688
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 06/17/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQmrQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry-Level Aircraft Equipment Repair Technicians

Description:
STS Technical Services offers Entry-Level Aircraft Equipment Repair Technicians jobs in Hawthorne, California.
Job Duties:
Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
Comply with FAA and company policies and procedures
Ensure accurate and timely completion of work orders
Ability to perform routine and non-routine tasks independently
Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
Maintain safe and clean work environment
Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
Ensure system security of the electronic record keeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
Provide feedback/suggestion to improve customer satisfaction
Perform any other duties as assigned by the Station Manager/Supervisor
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36256
Job Location: Hawthorne, CA
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Exhaust Processor

Description:
We have an outstanding Contract position for an Exhaust Processor to join a leading Company located in Tempe, AZ.

** Candidate must be able to obtain and maintain a Confidential Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Main function is to vacuum process and assemble components for the manufacture of bare image intensifier tubes for use in night vision products. The Exhaust Processor receives the preassembled tube and loads it into the exhaust station. They then process and activate the tube and cathode under ultra-high vacuum. The tube is then sealed and unloaded. All process data is recorded in the quality tracking system (QTS), then the tube and the accompanying paperwork are delivered to Initial Test (I-Test).

Major Responsibilities:
Must be able to follow written procedures and complete assigned work in a timely manner to keep production schedule while maintaining acceptable yields as determined by area supervisors and engineers.
Use of hand tools, including but not limited to, power drivers and torque wrenches.
Use of Digital Multi-Meters (DMM), high voltage probes and general electronic equipment.
This job has considerable physical demands.
Must be able to consistently report to work and be on time for scheduled shift.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
A minimum of One verifiable year of exhaust/vacuum experience within the Exhaust Processor Job Family is required for this position.
Desired Qualifications:
One to three years of exhaust/vacuum experience within the Exhaust Processor Job Family, or having a minimum of two years’ experience within the high-tech manufacturing environment with like experience and equivalent knowledge.
Attainment of OJT certification in 50% of the critical exhaust processes for their exhaust area.
ETO provided in-house clean-room certification.
General knowledge of ultra-high vacuum technology (OJT provided).
Basic computer knowledge for data entry and email communication OJT forms and visual aids.
Basic electrical knowledge, Lock-out/Tag-out and industrial safety (OJT provided).
 
Job Number: 36443
Job Location: Tempe, AZ
Rate: $16.00
Duration: 3 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Experimental Avionics Tech-1st Shift

Description:
PDS Tech, Inc. is seeking an Experimental Avionics Tech in Wichita, KS

To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components. Perform analysis of routine electrical and avionics malfunctions according to standard shop practices using some equipment such as voltmeters, ohmmeters and continuity lights. Perform minor repair such as replacing wires and connectors on standard electrical components, removing, repairing, and re-installing avioncis equipement. Under guidance of supervisor, assist with analysis of more complicated malfunctions and repair of standard avionincs and electrical components. Install electrical, avionics, and electronic components as directed.
Minimum 2 years of related aircraft avionics systems, troubleshooting and repair
 
Job Number: 1910099918
Job Location: Wichita, KS
Duration: 9 months
Input Date: 06/03/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jY5TQAU&URLSource=cjhunter

Experimental Instrumentation Technician-1st Shift

Description:
PDS Tech, Inc. is seeking an Experimental Instrumentation Technician in Wichita, KS

Instrumentation Tech Job Summary:
Candidates will be responsible for carrying out Instrumentation DAS (data acquisition system) installation and troubleshooting duties on experimental aircraft.
Candidates will be required to perform these duties in support of new product and sustaining aircraft designs.
These duties will include coordination with other Engineering and technical groups to help develop, implement, monitor and status assignments.

Responsibilities: * Candidate will plan and perform the work involved in the installation, calibration, and troubleshooting of instrumentation systems required for data acquisition on experimental aircraft.
* Candidate will be utilizing various types of specialized test equipment to troubleshoot data acquisition systems on aircraft.
* Candidate will be working independently and be responsible for good decision making.
* Candidate will be working with all aspects of experimental aircraft design and will be required to frequently interact with engineering personnel.
EDUCATION:
High school education or equivalent. Technical school training is recommended to provide broad training in electronics and use of test equipment.
EXPERIENCE:
Requires up to 2 years experience with aircraft electrical and instrumentation systems of which at least 1 year must be with installation, checkout and calibration.
 
 
 
Job Number: 1910100283
Job Location: Wichita, KS
Duration: 9 months
Input Date: 03/28/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033bf8QAA&URLSource=cjhunter

FPGA Design Engineer 2

Description:
NEED CANDIDATES IMMEDIATELY

The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.

RESPONSIBILITIES:
The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment.

*** PER MANAGER ***:
"We need to find candidates who have experience in FPGA development. It requires at least a few years of development in order to be sufficient at the designs. A lot of the candidates we've looked at do not have that background. Or if they have some background in FPGA development, it was embellished in their resume. The candidates I've spoken were not able to talk in details about their previous work history. Our goal is to find someone who is versed in digital design. That requires years of FPGA development in either one of these coding languages: VHDL, Verilog, or System Verilog. The candidate also needs to know how to use Vivado, the FPGA development tool."

EDUCATION:
Bachelors in Science, Masters, or PhD is required.
School must be accredited
AND at least 2 Years of relevant experience; or 0 Years with Masters; 0 Years with PhD.

HOURS:
9/80 workweek.

 
Job Number: 177447
Job Location: Manhattan Beach, CA
Rate: $42 to $44.00 DOE
Duration: 1 year
Input Date: 04/08/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 03/04/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Verilog/RTL Programmer [US Citizens only] (037)

Description:
*This is a full time, 1 year contract located in Santa Barbara, CA*

We seek an Electronic circuit design engineer who will be developing, testing, integrating and troubleshooting FPGAs. The effort will be mostly involved with FPGA programming, Verilog/RTL analog and digital designing, and simulation.

Required:
*4 years’ experience in circuit designing of FPGAs
*Experience in Verilog, RTL and analog/digital design
*Candidate may need a clearance after starting, which requires applicants to be US Citizens only.
*BSEE or related computer degree



Plus:
*Mixed signal design; high speed digital and RF circuit design experience
*Familiar with design reviews and flow downs
*Matlab or C++ programming experience
*Familiar with Test engineering and simulation tools.
 
Job Number: 037
Job Location: Santa Barbara, CA
Input Date: 07/03/2019
Last Updated: 07/24/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Fabrication Specialist
(U.S. Citizenship Required*)
Salt Lake City, UT
2019-9086
Responsibilities:
• Perform machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks.
• Perform composite lay-up, fabrication and assembly tasks.
• Assemble precision mechanical and electro-mechanical components.
• Assemble, repair, modify and install various power plants and drive trains.
• Perform soldering on electronic and avionics products.
• Assemble and install wire harnesses and avionics products.
• Prepare test articles, fixtures and data collection devices to perform various tests.
• Perform basic organic chemical conversion and paint preparation.
• Apply routine organic coatings for corrosion protection and appearance requirements.
• Work on articles of moderate complexity using established drawings and requirements

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent combined with 1+ years of experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9086
Job Location: Salt Lake City, UT
Duration: 12 Months
Input Date: 07/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Fabrication Specialist
(U.S. Citizenship Required*)
Salt Lake City, UT
2019-9022
Responsibilities:
• Perform machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks.
• Perform composite lay-up, fabrication and assembly tasks.
• Assemble precision mechanical and electro-mechanical components.
• Assembles repair, modify and install various power plants and drive trains.
• Perform soldering on electronic and avionics products.
• Assemble and install wire harnesses and avionics products.
• Prepare test articles, fixtures and data collection devices to perform various tests.
• Perform basic organic chemical conversion and paint preparation.
• Apply routine organic coatings for corrosion protection and appearance requirements.
• Work on articles of moderate complexity using established drawings and requirements.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or GED combined with approximately 1+ years of related experience; or an equivalent combination of education and experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9022
Job Location: Salt Lake City, UT
Duration: 12 Months
Input Date: 07/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Fabrication Specialist
(U.S. Citizenship Required*)
West Jordan, UT
2019-9016
Responsibilities:
· Perform machine set-up, machining, sheet metal fabrication and extrusion, tube bending and fabrication tasks.
· Perform composite lay-up, fabrication and assembly tasks.
· Assemble precision mechanical and electro-mechanical components.
· Perform soldering on electronic and avionics products.
· Assemble and install wire harnesses and avionics products.
· Prepare test articles, fixtures and data collection devices to perform various tests.
· Perform basic organic chemical conversion and paint preparation.
· Apply routine organic coatings for corrosion protection and appearance requirements.
· Work on articles of limited complexity following established drawings and requirements.

Qualification:
· Must be willing to work 1st, 2nd, or 3rd shift if required. Training may be performed on 1st shift and then transferred to another shift. Overtime during the week and/or weekend work may be required
· Some travel may be required between building to facilitate training requirements.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
· High school diploma or GED combined with approximately 1+ years of related experience; or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Join a team that values your experience!
 
Job Number: 2019-9016
Job Location: West Jordan, UT
Duration: 6 Months
Input Date: 06/28/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's for openings in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High school diploma or GED and typically 1 or more years related experience or an equivalent combination of education and experience.

FULL TIME/2ND SHIFT
WORK HOURS: 3:30 PM - 12:00 AM

MISCELLANEOUS:
Mechanic will receive basic assembly training for 2 - 4 weeks, depending on work station assigned.
 
Job Number: 179979
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 06/18/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/15/2019
Last Updated: 08/21/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Functional Safety Manager

Description:
PDS Tech, Inc. is seeking a Functional Safety Manager in Kokomo, IN.

Summary:

  • Our vision is efficient, electrified vehicles for future transportation.
  • Come work with deeply experienced technical team with 25+ years of experience in design, development and manufacturing in a fast-paced development environment.
  • Offer an opportunity to analyze,  design, and test Power Electronics Inverter Systems for Hybrid and Electric Vehicles.

 Responsibilities and Duties:

  • Develop Technic Safety Concept (TSC) based on customer Functional Safety Goals, per ISO26262.
  • Develop Technical Safety Requirements (TSR), derived from TSC.
  • Develop Software Requirements Documentation (SRD), derived from TSR.
  • Allocate functional safety requirements to specific hardware & software elements and track implementation status.
  • Develop test strategies to verify implementation vs. functional safety requirements.
  • Provide necessary analysis (torque and power analysis, electric machine controls) to justify TSC and TSR.
  • Analyze technical safety architecture to achieve TSC, TSR, SRD and Hardware Safety Requirements (HSR) content.
  • Perform Functional Safety Analysis (FMEA, FTA, FMEDA).
  • Travel weekly to Indiana for 1st 3 months then based in Auburn Hills, MI.

Basic qualifications:
  • Bachelor’s Degree in electronics or electrical engineering.
  • 5+ years of engineering experience.
  • 2+ years’ experience on a power electronics project (Inverter, DC/DC converter) as a system engineer.

 Nice to haves (preferred qualifications):

  • Development of automotive embedded systems and microprocessors, systems simulation and modeling tools (e.g. Matlab/Simulink).
  • Familiarity with electric/hybrid vehicles, electric drives and electric machine controls, high voltage inverter and DC/DC converter topologies.
  • Knowledgeable on analysis methodology (SFMEA, FTA, FMEDA).
  • Experience on the use of engineering analysis tools: Medini Analyze, Reliability Workbench, APIS-IQFMEA).

 
Job Number: 1910101484
Job Location: Kokomo, IN
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Lieberman
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033erbQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
General Mechanic

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

General Mechanic
(U.S. Citizenship Required*)
Mesa, AZ
2019-9113
Responsibilities:
• Must be able to perform teardown, inspection, build-up and test of assemblies and sub-assemblies on various components associated with the AH-64D Longbow Apache.
• Perform all maintenance and repair tasks within the budgeted hours and scheduled time allotted for completion.
• Clearly and precisely document all maintenance and repair actions using electronic or written means.
• Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or GED is required

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9113
Job Location: Mesa, AZ
Input Date: 07/11/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1910100719
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094541
Job Location: Manitowoc, WI
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

·Assist in the training of the team of industrial engineering.

Qualifications & Experience

·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

·Experienced in man-hour management or man-hour standard establishment of large projects.

·Experienced in optimization of production site management of large projects.

·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_70
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
1389-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open
Submitted: 2/7/2019 5:08:41 PM

Qty: 1
Desired Start Date: 2/21/2019
End Date: 2/20/2020

Required experience:
Experience with SAP / GTS
Experience Classifying items previously not imported under HTSUS
Experience Reviewing current HTSUS classifications to vet or correct as needed
At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision
Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Position’s primary responsibilities will include assisting Import Control with classifying items pending import classification instructions, proactively classifying items currently in SAP GTS system not assigned US HTS, reviewing currently assigned HTS classifications and updating as necessary, remaining current with legislative changes in additional tariff classifications as well as scheduled updates/changes to HTSUS and maintaining necessary updates and notations in SAP/GTS, identifying and gaining access to proprietary information databases for the purposes of classification, evaluating and providing guidance on use of chapter 9801-9802 provisions, providing internal training on advanced classification topics. In addition, position may perform research and assist in determining eligibility for foreign trade agreements, determine participating government agency regulation, applicability of ADD/CVD regulations, partner with different internal groups to support project work.

• Classify items previously not imported under HTSUS
• Review current HTSUS classifications to vet or correct as needed
• partner with export classification specialist for project/assistance
• partner with other business units for projects as needed
• provide training to Import Control teammates
• Remain current in all additional specialized tariffs
• Partner with ITC and Brokerage firms to determine OGA status
• Maintain GTS HTS classifications, including additional regulations such as ADD/CVD, specialized tariffs, relevant binding rulings, and information specific to the product in GTS notes
• Potentially assist in evaluate FTA feasibility, work with programs to obtain necessary documentation, maintain yearly blanket documentation
• Potentially Maintain and provide to forwarders FTA blanket statements
• Potentially support B schedule import activities

Bachelor’s degree in legal, business management, or supply chain.
At least 5 years of experience researching and classifying under HTSUS wide range of products with little direct supervision

Expertise in reading, understanding, and applying data in HTSUS, including General Rules of Interpretation, Additional Rules, and Section and Chapter notes.
Expertise in utilizing explanatory notes, published binding rulings, informed compliance publications, customs bulletins
Expertise in understanding Federal Code of Regulations Title 19 part 10 and 152 as it applies to requirements of classification and applying it to specific classification scenarios.
Experience in understanding detailed product literature and determining best contact group for clarification and additional details.
Previous work employed by an importer preferred.
Exceptional written and verbal communication skills.
Project management experience preferred.
Ability to work independently while integrating projects with wider team environment required.
High level of reading comprehension required.
Meticulous attention to detail.
Adept at working professionally with personnel of different knowledge, skill sets, and priorities required.
Experience with Microsoft Office suite required.
Experience with SAP / GTS preferred

Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly
 
Job Number: JE-1389-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 05/31/2019
Last Updated: 07/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Manufacturing Document Specialist

Description:
Chipton-Ross is seeking a Manufacturing Document Specialist for an opening in Carlsbad, CA.

RESPONSIBILITIES:
Technical document specialist is required to implement a new documentation system by converting manufacturing instructions from batch records/SOPs/WINs into EBR (Electronic Batch Record) forms.
* Sets up and maintains EBR system to capture all record control requirements, including maintenance of files, quality assurance, information conversions, and systems automation
* Edit or modify policies and procedures for the EBR system
* Requires working closely with other team members to prioritize workload evenly as well as review data collected by others to ensure accuracy
* Opportunity to identify improvements to the EBR system and work with developers to design, test and validate improvements
* Willingness to train new EBR system users as needed

REQUIRED EXPERIENCE:
* The successful incumbent will possess a Bachelor's Degree in Biology, Molecular Biology, Chemistry or other related discipline in order to effectively interpret the current manufacturing documents
* 1-2 years' highly preferred experience with data entry working with large data sets utilizing Excel
* Experience can be from a previous job, internship, project, etc.
* Comfortable working with formulas
* Excellent verbal and written communication skills
* Be details oriented
* A versatile skill set, that includes the ability to adjust to a dynamic department's needs.
* Proficient in MS-Office, Excel, Word, Power Point
* Basic understanding of ISO 9001 guidelines

EDUCATION:
Accredited Bachelor's Degree in Biology, Molecular Biology, Chemistry or other related discipline

WORK HOURS:
1st Shift
Full-Time


 
Job Number: 178862
Job Location: Carlsbad, CA
Rate: Up to $15.25 DOE
Duration: 12 Months
Input Date: 04/18/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Tyler Harrell
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tharrell@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Support the non-recurring manufacturing activities on the IRST program. The individual will be responsible for the development of manufacturing work instruction and tooling necessary to build circuit cards and Cables/harnesses in a production environment.

Mandatory Experience in the electronics field directly supporting the documentation development to support the build of hardware. Hands on experience in either circuit card or Cable and Harness build, tooling development and work instruction.

Desired Experience with SAP
 
Job Number: 47007
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 07/08/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/24/2019
Last Updated: 08/21/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Material Handler I

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Fort Worth, TX
Rate: $59.92/HR
Duration: 5 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This position is for a flight test mechanical design engineer.
2. The selected candidate will support the Integrated Fighter Group (IFG) Flight Test team working on F-16 and F-22 aircraft.
3. The candidate will be required to perform mechanical design activities for the installation of flight test equipment and data system components.
4. The candidate will be responsible for releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operations.

Responsibilities for this position include:
1. Development, installation oversight, and validation of 3D CATIA flight test mechanical designs.
2. Coordination with suppliers, internal and external integrated product teams, management and the customer.
3. Technical engineering support for installation and testing at CONUS and OCONUS locations.
4. Engineering liaison for flight test and instrumentation modification activities.
5. Produce and read engineering drawings, schematics and technical procedures
6. Develop troubleshooting plans and discrepancy resolution

Required Qualifications:
1. Bachelor’s degree with 9 years of professional experience; or 7 years of professional experience with a Master’s degree
2. Experience with CATIA V5 or V4
3. Development, installation oversight, and validation of 3D CATIA flight test mechanical designs

Desired Skills:
1. Experience in flight test mechanical design
2. Understanding of sensor technology utilized in the test of aircraft structures (loads and vibration) and vehicle subsystems (environmental control systems, flight controls, propulsion, and aerodynamics).
3. Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors.
4. Familiarity with fighter aircraft technical data, maintenance practices, flight operations, and weapons
5. Understanding of aircraft avionics subsystems and electronic bus architectures including 1553, Ethernet, and Firewire protocols
6. Good communication and people skills with the ability to work in a diverse engineering and technician team environment
 
Job Number: 11154
Job Location: Fort Worth, TX
Rate: $59.92/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 07/08/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
This position is for a flight test mechanical design engineer. The selected candidate will support the Integrated Fighter Group (IFG) Flight Test team working on F-16 and F-22 aircraft. The candidate will be required to perform mechanical design activities for the installation of flight test equipment and data system components. The candidate will be responsible for releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operations.

Responsibilities for this position include:

• Development, installation oversight, and validation of 3D CATIA flight test mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for installation and testing at CONUS and OCONUS locations.
• Engineering liaison for flight test and instrumentation modification activities.
• Produce and read engineering drawings, schematics and technical procedures
• Develop troubleshooting plans and discrepancy resolution

Must be a U.S. citizen. This position will require a government security clearance.

Basic Qualifications:
• Bachelor’s degree with 9 years of professional experience; or 7 years of professional experience with a Master’s degree
• Experience with CATIA V5 or V4

Desired Skills:

• Experience in flight test mechanical design
• Understanding of sensor technology utilized in the test of aircraft structures (loads and vibration) and vehicle subsystems (environmental control systems, flight controls, propulsion, and aerodynamics).
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors.
• Familiarity with fighter aircraft technical data, maintenance practices, flight operations, and weapons
• Understanding of aircraft avionics subsystems and electronic bus architectures including 1553, Ethernet, and Firewire protocols
• Good communication and people skills with the ability to work in a diverse engineering and technician team environment
 
Job Location: Fort Worth, TX
Rate: 45/hr
Per Diem: Yes
Input Date: 07/05/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*Two openings; both 9+ years’ experience in (1) electronics wire harness design and (1)Airframe structural design specialist using CATIA V5

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Ability to resolve problems and non conforming parts disposition, root cause analysis

*Per diem split is available for those travelling for this position

*Must have an Active Interim or Secret Clearance (and reinvestigated in last 5 years)

*Engineering Degree



Pluses:

*Experience designing using composites

*Siemens Fibersim experience
 
Job Number: 89
Job Location: Palmdale, CA
Duration: 1year or more
Input Date: 06/26/2019
Last Updated: 07/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Microelectronic Technician

Description:
PDS Tech, Inc. is seeking a Microelectronic Technician, in Manhattan Beach, CA.

Summary:
  • Performs a variety of duties to support the research and development of new microelectronic, opto-electronic, micro-electromechanical and sensor manufacturing processes, devices, components, or systems, semiconductors, semiconductor-based integrated analog or digital circuits, micro-electromechanical systems, sensors systems, and related technologies.
  • Develops and applies inspection and test procedures of micro-components and micro-systems.

Basic Qualifications:
  • High School diploma or equivalent and 0 years additional education and/or related experience.


 
 
Job Number: 1910102979
Job Location: Manhattan Beach, CA
Duration: 12 months
Input Date: 06/11/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jgLQAQ&URLSource=cjhunter

Microelectronic Technician CA

Description:
Microelectronic Technician (Job Number: 19016881)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 2nd Shift

Target Start Date: Jul 29, 2019

Target End Date: Jul 24, 2020

Pay rate:$20.00

Location: Manhattan Beach, CA

Work schedule: 9/80 2nd shift

Duration of assignment: Up to 1 year

Position Summary / Responsibilities
Performs a variety of duties to support the research and development of new microelectronic, opto-electronic, micro-electromechanical and sensor manufacturing processes, devices, components, or systems, semiconductors, semiconductor-based integrated analog or digital circuits, micro-electromechanical systems, sensors systems, and related technologies. Develops and applies inspection and test procedures for micro-components and micro-systems.


Qualifications

Basic Qualifications: High School diploma or equivalent and 0 years additional education and/or related experience
 
Job Number: JK-1776
Job Location: Manhattan Beach, CA
Rate: 20/hr max
Per Diem: no
Overtime: 2nd Shift
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 08/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Three (3) years of machining, planning, tool design, or related manufacturing experience.

Position Purpose:
1. Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions:
1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
5. Develop operator set-up sheets for numerical control machines.
6. Develop flat pattern mylars and templates as required.
7. Produce 2-D Catia tool drawings as required.

Additional Functions:
1. May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
2. Assist in formulating Numerical Control policies, procedures, and specifications as required.
3. Perform other duties as assigned.

Other Requirements:
1. Good verbal and written communication skills required.
2. Must be able to read and interpret blueprints.
3. Familiarity with various machining methods, technical writing, and computer use.
4. Must possess good drafting, math, and geometry skills.
5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 11064
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 08/06/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

NC Programmer II

Description:
NC Programmer II

Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements:
• Good verbal and written communication skills required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 24-363
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

P-8A Non-Acoustic Sensor Operator

Description:
Chipton-Ross is seeking a P-8A Non-Acoustic Sensor Operator located in Patuxent River, MD

RESPONSIBILITIES:
Contract to Hire Project Instructions
This is a contract to hire project

Primary Location: US-US-MD-Lexington Park

The P-8A Non-Acoustic Sensor Operator (EWO) will support airborne developmental testing of hardware and software for non-acoustic systems including radar, electro-optical, infrared imaging, electronic support measures, IFF, C4I networks, mission software and tactical common data-links. The selected candidate will perform aircrew duties as a member of the P-8A Integrated Test Team with Air Test and Evaluation Squadron Two Zero (VX-20) at NAS Patuxent River, MD. Candidate will be responsible for a variety of tasks that support P-8A flight testing, including participation in technical meetings, analysis of test requirements, test plan preparation, drafting detailed test procedures, conducting or supervising data collection in flight simulators, aircraft ground and flight environments, writing daily test reports, problem/deficiency reports and tracking. Flexible work hours may be required to support test activities. Most work will be conducted on-site at NAS Patuxent River, MD; however some travel will be required.

Past or current designation as a Non-Acoustic Systems Operator (EWO) in P-3C/P-8A aircraft is required.
Candidate selected must possess a minimum of 1000 hours in P-3C/P-8A or similar aircraft.

Current or former qualification as a P-8A Non-Acoustic Systems Operator (EWO) Instructor is desired. Flight designations current within 12 months of start date of employment desired. The position will allow various combinations of education and experience using a 1 year of education for 1 year of experience substitution.

Knowledge, Skills and Abilities: Applicant must possess extensive knowledge in the operation of airborne maritime environment Non-Acoustic Systems. Candidate must be able to pass the physical and training qualification requirements to provide contract aircrew support, including completion of Navy water survival and aviation physiology training, as well as annual FAA Class II flight physical. Candidate must be able to organize, demonstrate effective oral and written communications, and operate in a dynamic and fast-paced team environment. Candidate must be proficient with the Microsoft Office Suite (Word, Excel, and Power Point) and similar computer-based productivity applications. EOE/Minorities/Females/Vet/Disability Application Instructions For immediate confidential consideration, please apply online by clicking Apply Now to Join Our Team.

EDUCATION:
Accredited High School Diploma/GED and eight (8) years of related experience

A Bachelor's Degree in computer science, mathematics, physical sciences, engineering, or equivalent work related experience in Developmental Test, Operational Test, Fleet Introduction Team or Weapons and Tactics Unit is desired. Two years of systems integration and test experience with P-3C/P-8A Non-Acoustic Systems is desired.

WORK HOURS:
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 172151
Job Location: Patuxent River, MD
Rate: $DOE
Duration: 4 MONTHS
Input Date: 06/27/2018
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

PC Support Technician

Description:
Chipton-Ross is seeking a PC Support Technician for a contract position in Huntsville, AL.

Need for a temporary PC Support Technician to join the PC Support Services team.

RESPONSIBILITIES:
Installs, repairs, and performs preventive maintenance on a variety of moderately complex personal computers and peripheral devices.
Sets up and tests personal computer systems, peripherals, and software, including operating systems.
Provides general hardware and software support for users, provides user training, and guides users having difficulty with personal computers, peripherals, or software.
Performs routine diagnosis on failed equipment and software and coordinates repairs. Identifies and reports network issues. Interfaces with vendors to resolve hardware/software issues.
Prepares and maintains electronic and hard reports and logs, including purchase orders and equipment inventories.
May work the help desk and provide telephone support or arrange for service for trouble calls.
Schedules outside repairs for equipment under warranty or contract.
Maintains current knowledge of technological advancements and developments in the computer support field.
Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
Performs other duties as required or assigned.

REQUIREMENTS:
A+, MCSA, Security+ preferred
Experience with Windows 10, Active Directory, MS Exchange 2013
Linux - CentOS/Redhat
Enterprise environments
Typically requires an Associate's degree with an emphasis in information technology, or a related discipline, along with one or more years of progressive personal computer technical experience in an information technology department. May substitute a certificate in information technology from a recognized organization and equivalent experience in lieu of education.
Requires an understanding of department policies and procedures, and a working knowledge of current personal computers, relevant operating systems and associated peripheral equipment.
Must be customer focused and demonstrate the ability: to resolve semi-routine technical situations; communicate with all levels of personnel; and, explain general information.
Must have a valid California class C driver's license and a good driving record, verifiable by the DMV. Must be able to work extended hours as required.
Must be able to sit, stand and kneel for extended periods of time and have the ability to lift up to 25lbs.

EDUCATION:
Typically requires an Associate's degree with an emphasis in information technology, or a related discipline, along with one or more years of progressive personal computer technical experience in an information technology department. May substitute a certificate in information technology from a recognized organization and equivalent experience in lieu of education.

MISCELLANEOUS:
5/40 work schedule. 1st shift
 
Job Number: 179581
Job Location: Huntsville, AL
Rate: $24 to $26.00 DOE
Duration: 6 mo
Input Date: 05/28/2019
Last Updated: 08/21/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ramirez-Velez
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bramirezvelez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Operator

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Production Operator
(US Citizenship Required*)
Quincy, MA
2019-9040

Responsibilities:
• Perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Perform fabrication or inspection functions in a research, production or pre-production environment.
• Read and interpret moderately complex schematics and drawings
• Follow more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• Build or integrate hardware for prototypes, subassemblies or systems
• Perform moderately complex electrical tests
• Perform more complex rework and refurbishment of hardware and systems
• Perform incorporation of Master Change Order (MCO), Engineering Change Order (ECO), Variance Authorization (VA) and use of visual aids
• May conduct manufacturing inspections on processing line in accordance to quality specifications
• May be involved in packing, movement and protection of finished product
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
• Perform more advanced fabrication and marking
• Maintain and operate various equipment/tooling
• Perform more advanced loading and configuring of customer/standard software on customer device
• Perform inspection per documentation
• Complete appropriate quality paperwork as required (Corrective Action Request, Discrepant Material Report etc)
• Accurately complete process paperwork and entering data into the applicable work order management system
• Perform mixing of solvents and paints per specification
• Support continuous improvement activities and participates in problem solving activities
• Maintain a clean and orderly work area
• Support safety/housekeeping standards
• Contact are primarily within immediate work unit and direct supervisor
• Normally receives little instruction on daily work; general instructions only on new assignments

Qualifications:
• Department of Defense Secret security clearance is desired at time of hire.
• Solid manufacturing process skills
• Experience with elector-mechanical assembly
• Solid Soldering, wire crimping and wire routing skills; J-STD-001 & IPC-A-610 certifications desired
• Solid knowledge of polarity and inspection criteria
• Solid knowledge of Bills of Material (BOM)
• Demonstrated ability for unsupervised and accurate use of manufacturing work order application
• Solid communication skills, both written and verbal
• Demonstrated time management skills
• Able to work effectively on any size work team
• Solid computer skills
• Solid knowledge of measuring/test equipment and math
• Able to use various computer software applications to analyze and manage data
• Able to interpret more advanced documents, work instruction, and schematics
• Solid knowledge of configuration control procedures applicable to the assigned work/area
• Able to exhibit adaptability/flexibility
• Able to lift a minimum of 15 pounds
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required combined with a minimum of 4 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9040
Job Location: Quincy, MA
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
We have an outstanding Contract position for a Quality Engineer to join a leading Company located in the Hicksville, NY surrounding area.

** Position requires U.S Citizenship.

Job Responsibilities:
Support the development, verification, and manufacture of products using Advanced Production Quality Planning, Continuous Improvement, and Statistical Process Control techniques.
Develop and manage data and metrics using Data Visualization tools, SQL, and advanced excel.
Turn data to information with recommendations for cost savings and process improvements.
Perform product quality and quality management system audits to assure compliance with customer, drawing, internal, and regulatory requirements.
Coordinate needed actions to support continued ISO/AS9100 certification, preferred supplier status, and AS 9001 certifications (required for Government Quality Engineers).
Serve as Voice of the Customer with suppliers on all quality-related activities.
Review, identify, implement, and maintain Customer Quality flow down requirements.
Perform review of bid and proposal quality clauses and provide compliance matrix.
Perform review of customer quality clauses, quality documents, and provide compliance matrix.
Support Operations to ensure that products and processes comply with the relevant requirements of the quality management system and contribute to an atmosphere of continuous improvement through the realization of cost reduction and process improvement initiatives.
Perform design review activities including inspectability, consistency, adequacy, accuracy, and conformance to customer requirements and provide recommendations for improvement.
Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for internal and external customers.
MRB/ECN Board representation and duties.
Responsible for participating in continual improvement activities to enhance the quality system, such as 5S, Kaizen lean methods, etc.
Employs mistake-proofing techniques.
Interface with Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data.

Basic Hiring Criteria:
A Bachelor’s Degree in Mechanical Engineering, Industrial Engineering, Electronic Engineering or Quality Engineering from an accredited institution.
0 - 3 years’ experience.

Desired Qualifications:
Understanding of Microsoft Office products.
Understanding the use of computer databases – for example, MRP, QA, etc.
 
Job Number: 36823
Job Location: Hicksville, NY
Rate: 32.00
Duration: 7 months
Start Date: 7/22/2019
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Space Systems Electronics Inspector)

Description:
TAD PGS, INC. is currently seeking a Quality Engineer Inspector for one of our clients in Laurel, MD.

Inspect high-reliability one-of-a-kind space flight electronic boards, board assemblies, and components to IPC J-STD-001ES, NASA-STD-8739.1A, and NASA-STD-8739.4 requirements. Provide support to assigned project(s) for the development and management of a space flight system’s project mission assurance program. The mission assurance program includes the product assurance, process control, quality assurance, software quality assurance, configuration management, parts and materials control, contamination control, system safety, reliability, AS9100 compliance, requirements and design review, and flight assurance aspects of the project.

Major Responsibilities:
Visually inspect electronic assemblies to IPC J-STD-001ES, NASA-STD-8739.1A, and NASA-STD-8739.4 high standards, primarily using microscopic equipment. Assess the significance of identified nonconformance’s and make recommendations regarding how nonconforming hardware should be dispositioned.
Inspect conformal coatings and polymeric materials on printed circuit board assemblies.
Maintain and verify completeness of as-built documentation package, including entries of nonconformance’s in computer databases and on-line systems.
Assist project Systems Assurance Manager (SAM) in performing tasks related to the day-to-day support of space- flight projects, including spacecraft integration, test, and launch. Coordinate inspections, quality engineering support, configuration management requirements, and related assessments and audits as directed by SAM.
Develop, improve, and maintain project requirements processes and documentation, and quality management system processes and documentation through procedure streamlining and continuous improvement. Job duty 5 text.
Basic Hiring Criteria:
5 years’ experience in performing visual inspections of electronic assemblies and their associated components.
The majority of this time must be in inspecting unique items versus a production line or incoming material inspection.
Ability to link conformance or nonconformance’s to defined requirements and specifications.
Current or previous certification to one or more of the following standards, with the ability to get recertified within 2 months: NASA-STD-8739.1 NASA-STD-8739.2 NASA-STD-8739.3 NASA-STD-8739.4. IPC J-STD-001ES / J-STD-001FS.
Demonstrated ability to utilize microscopes and measuring equipment.
Able to work in clean room environment.
Knowledge and / or prior work working with Electro-Static Discharge (ESD) sensitive hardware.
Excellent oral and written communication skills.
Ability to work in a collaborative environment and solve problems quickly within demanding schedules.
Ability to identify cause of problems and implement timely technical solutions.
Excellent interpersonal skills, be positive, flexible, and have demonstrable sound technical and professional judgment Microsoft Office computer skills; competent at writing clear and concise summary reports.
Able to work with a variety of individuals from line operators to managers.
Desired Qualifications:
Current certification to the above listed workmanship standards.
Familiarity with INFOR Visual ERP software.
Familiarity with INFOR IQM software.
Ability to review test setups; witness, review, and/or approve test results; perform safety awareness reviews; and perform facility walkthroughs/audits.
 
Job Number: 33193
Job Location: Laurel, MD
Rate: $21-$35 DOE
Duration: 12 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: TAD PGS INC
Attention: Elva Velasquez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

RS Avionics/Elec Tech II

Description:
PDS is seeking a Avionics/Electrical Technician II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions: 
  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 


Additional Functions: 
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
Performs other duties as assigned. 
 

 

Education and Experience Requirements:
High School Diploma or GED required.
Four (4) years experience in an avionics/electrical career field or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
A&P (FAA Airframe and Powerplant) license preferred.
FCC preferred.
NCATT preferred.



Unique Skills:



Posting is advertised as a First shift position. However, candidate must be able to work any shift assigned by Service Team Manager.




Other Requirements:



  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.

 
Job Number: 1910103767
Job Location: Savannah, GA
Duration: 6 months
Input Date: 06/21/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GROEQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Ability to analyze large data sets from a reliability perspective and identify high drivers.Ability to perform reliability tasks such as allocation, predictions, FMECA and FRACAS.Ability to use reliability and office software tools to perform reliability analyses.Ability to understand and analyze mechanical, electrical, electronic and hydraulic engineering concepts.

Familiarity with WQS reliability software.

Familiar with other Specialty RAM-T disciplines.

ASQ Certified Reliability Engineer
 
Job Number: 47008
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/08/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Senior Assembly Mechanic

Description:

PDS Tech, Inc, is looking for a Senior Assembly Mechanic in Hunt Valley, Maryland:
 
PRIMARY FUNCTION: To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.
 
JOB DUTIES:
  • Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools. Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
  • Assists less skilled assemblers.
  • Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
  • Resolves manufacturing problems.
  • Maintains good housekeeping, safety standards, and calibration requirements.
  • May set up production equipment.
  • Practices Total Quality principles and concepts.




 



Qualifications

 KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED
 
•        Specialized and extensive experience in mechanical assembly techniques.
•        Shop math.
•        Military and commercial quality specifications.
•        Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
•        Ability to use measuring instruments.
•        Ability to set up and operate all fabrication equipment in area assigned.
•        Ability to plan and organize work.
•        Ability to concentrate while discriminating colors and small details.
•        Ability to apply math skills.
•        Hand and eye coordination.
•        Finger and hand dexterity.
•        Electrostatic discharge procedures and methods.
•        Ability to work well with others employing team principles.
•        Must be able to work in small confined areas
•        Must be flexible in work hours
•        Must be able to lift up to 20 to 30 pounds
 
EDUCATION AND EXPERIENCE:
Typically requires 3 or more years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.



 


 
Job Number: 1910099724
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 6 months
Input Date: 03/20/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXfGQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Senior Mechanical Hydraulic Design and Analysis Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0007 on application.




Our Client's Mechanical Systems team is looking for
innovative engineers to join the team in defining and integrating the
Hydraulic Systems and components into our current and future
commercial airplane product lines. Their organisation has design,
analysis, and certification responsibility for Hydraulic Power system,
Hydraulic Conveyance system, Landing Gear and Brake Actuation
systems, Flight Control actuation systems and Systems Control
Electronics for all current and future aircraft models.

Position Responsibilities:

Work to ensure world-class Hydraulic Systems equipment by
collaborating with other organisations such as Aerodynamics
Performance and Stability & Control, Structures, Flight Deck Crew
Operations, Pilots, Electrical Systems, Systems Stress, Customer
Services & Airline Customers, Manufacturing, Flight Line
Operations, Supplier Management, Airplane Safety and many others.

Developing and validating requirements and interface definitions.
Creating new detail design.
Conducting various types of analysis and/or simulations, use of CAD
systems such as CATIA V5, and math modelling with tools such as
Simulink, Matlab, and EASY5.

Verifying designs and performance via component, system-level and
airplane-level testing.

Participate in design reviews and engage in supplier coordination.
Participate in activities related to certification of our client's products
with regulatory agencies.

Experience and Qualifications:


Candidate must possess specialised experience designing mechanical
components and assemblies, including latches, hinges, door
mechanisms, locks, articulating bracketry, valves, pumps and/or
actuators.

Degree and typical experience in engineering classification:

Bachelor's and 15 or more years' experience, Master's with 12 or more
years' experience or PhD with 10 or more years' experience.
Bachelor,Master or Doctorate of Science degree from an accredited course of
study, in engineering, computer science, mathematics, physics or
chemistry.

Working experience with major airframers or major hydraulic components / systems suppliers such
is preferred.

Fluent English, with good communication skills.
 
Job Number: BHJOB28358_57
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Software Engineer - Level 1

Description:
Software Engineer - Level 1

Riverside, CA
$24/hr
8 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Supports multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software.

This employee will support the update of several automated visuals throughout the shop floor. This person will receive instruction from a seasons software engineer.

Programing in Python, electron, Java, and Java Script preferred.
 
Job Number: 11149
Job Location: Riverside, CA
Rate: 24.00
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 08/21/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Solder Operator

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Solder Operator
(US Citizenship Required*)
Bloomington, MN
2019-9021

Responsibilities:
• Perform project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
• Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
• May be involved in packing tasks
• May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
• May conduct manufacturing inspections on processing line in accordance to quality specifications
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
• Contact are primarily within immediate work unit and direct supervisor
• Maintain a clean and orderly work area
• Work is closely supervised, following detailed instructions, and periodic checking on work performance

Qualifications:
• Able to perform a variety of fine pitch solder operations
• Able to learn job skills and become familiar with company policies to complete assignments
• Able to use hand/torque tools, soldering irons, other light industrial tools
• General communication and interpersonal skills
• Able to set up basic equipment and process hardware compliantly to specifications
• General knowledge of measuring equipment and math
• General computer skills
• Computer literacy
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required.
• J-Std. Solder Certification is preferred.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9021
Job Location: Bloomington, MN
Duration: 6 Months
Input Date: 07/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Design Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Sr Design Engineer
(U.S. Citizenship Required*)
Littleton/Waterton, CO
2019-9084

Responsibilities:
• Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software.
• Must be able to interface efficiently with mechanical and electrical stakeholders.
• Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation.
• Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum.
• Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.
• This position supports a 9/80 work schedule.

Qualification:
• Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience.
• Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.
• Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation.
• Experience designing space electronics.
• RF layout and routing experience.
• High speed digital/mixed signal routing experience.
• Rigid-flex layout experience.
• Basic understanding of PCB fabrication and assembly processes.
• IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012.
• Experience with interfacing with PWB manufacturers.
• Experience with training new designers.
• Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release.
• Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master’s Degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9084
Job Location: Waterton, CO
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Staff Electrical Engineer

Description:
PDS Tech is seeking a Staff Electrical Engineer in Phoenix AZ
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.  The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.  Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.  Also includes managing Problem reports for hardware that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.  As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.
Primary Responsibilities
  • Primary ownership of Systems Development Processes.
  • Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
  • Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
  • Assess design maturity and review technical risk.
  • Participate in Component Design reviews.
  • Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
  • Support project planning efforts and ensure execution to schedule and budget.
  • Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
  • Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
  • Evaluate and approve electronic components to meet requirements for availability, performance and cost.
  • Support project planning efforts and ensure execution to schedule and budget.
  • Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
  • Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
  • Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
  • Good computer skills with ability to learn new programs/software
  • Ability to work under pressure and within time constraints
  • Excellent organizational skills with ability to multi-task amidst rapid change
  • Hardware Verification experience including, test procedure development, robustness testing and debug
  • Systems Verification experience including, test procedure development, robustness testing and debug
  • Experience with configuration management and problem reporting tools
  • Experience developing hardware/software integration plans
  • Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
  • Excellent written and verbal skills

 
Preferred Qualifications

  • Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
  • Experience using Mentor Graphics DxDesigner and Expedition
  • Masters’ degree in Electrical Engineering
  • Experience with high reliability controller electronics and power switching circuitry
  • Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.

 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 02/06/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002rAhkQAE&URLSource=cjhunter

Staff Electrical Engineer (Aerospace Electronic Control Units)

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for Aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities
• Primary ownership of Systems Development Processes.
• Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
• Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
• Assess design maturity and review technical risk.
• Participate in Component Design reviews.
• Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
• Support project planning efforts and ensure execution to schedule and budget.
• Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change
• Hardware Verification experience including, test procedure development, robustness testing and debug
• Systems Verification experience including, test procedure development, robustness testing and debug
• Experience with configuration management and problem reporting tools
• Experience developing hardware/software integration plans
• Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
• Excellent written and verbal skills

Preferred Qualifications
• Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Experience using Mentor Graphics DxDesigner and Expedition
• Masters’ degree in Electrical Engineering
• Experience with high reliability controller electronics and power switching circuitry
• Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 1 year
Input Date: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: sspolzino@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.

The role will involve:
• requirements definition using DOORS or structured modelling,
• detailed design,
• code implementation using embedded C,
• validation of requirements and
• verification of implementation.
• managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications
• 6+ years’ experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 1910103342
Job Location: Phoenix, AZ
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/10/2019
Last Updated: 08/01/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Staff Software Engineer

Description:
PDS Tech is seeking a Staff Software Engineer in Phoenix AZ
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.  

Once every couple of months travel is required to Rockford, IL for 10 to 15 days.

The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation.  It also includes managing Problem reports for the software that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.


Primary Responsibilities
  • Executing new product introduction, value engineering, and production support projects
  • Establishes software design requirements traceability, flow down requirements, development of code and test cases.
  • Hands on debugging of code during integration and lab testing.
  • Developing complex sub-system trade studies, algorithms, and error budgets.
  • Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
  • Proficient with C programming language, and embedded systems in a lab environment.
  • Experience with Microprocessors, Microcontrollers, and/or DSPs
  • Excellent written and verbal skills
  • Good computer skills with ability to learn new programs/software
  • Ability to work under pressure and within time constraints
  • Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications

  • 6+ years’ experience in software development
  • Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
  • Model Based Development, using SysML, Simulink or SCADE

Experience with the following industry guidance:  

  • DO-330, DO-331, DO-254, ARP4754A
  • Knowledge and use of ADA, Assembly, Perl, C#
  • Software Verification including, test procedure development, robustness testing and debug
  • Experience with software configuration management and problem reporting tools

Education:

  • Bachelors.

 
Job Number: 1910103342
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 06/18/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033kh8QAA&URLSource=cjhunter

Staff Software Engineer

Description:
Staff Software Engineer

Phoenix, AZ
$68/hr
12 month W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
• 6+ years experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 11111
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/18/2019
Last Updated: 08/21/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer IV

Description:
The Structural CAD Designer will prepare predominantly civil, structural and architectural detail drawings. Will work with Structural Engineers to produce drawings required to perform structural modifications to new and existing launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification contracts.

He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

The candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.

Experience/Skills Required
•The successful candidate should have at least (10) years of relevant experience building and/or modifying large industrial facilities.

•At least (10) years of recent Autodesk AutoCAD experience.
•3D modeling and design experience in Autodesk Inventor, Autodesk Revit Structure, Tekla Structures, or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 320
Job Location: Cap Canaveral, FL
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 06/28/2019
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Paulina
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

Structural Technician - PC 12 - Secret

Description:
PDS Tech Inc. is seeking a Senior Structural Technician, in Centennial, CO.

Summary:
  • Responsible for the efficient and economical performance of all assigned maintenance and modification duties.
  • Performs structural modifications/ maintenance on aircraft, in or about back shops, maintenance bases and remote sites; work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components of aircraft and aircraft components.
  • Performs maintenance work including, but not limited to, repairing and maintaining machinery and hangar equipment relevant to the position.
  • Assists Leads, Supervisors or Inspectors as required during inspection verification or modification/maintenance procedures.
  • Performs all assigned maintenance duties in accordance with the manufacturer's applicable maintenance manuals, policies, procedures and applicable Federal Aviation.

Education/Skills Required:
  • High School Diploma.
  • Maintenance experience on DoD aircraft preferred.
  • 5+ years’ experience.
  • FCC License preferred.
  • FAA repair station experience is desired.
  • Experience on DoD/fixed wing turboprop and rotary wing aircraft is desired.
  • Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment; knowledge of manuals necessary to perform job; skilled using basic hand tools, operate ground support equipment, troubleshoot engine electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Additional Responsibilities:

  • Punctuality to work each day and prepared to work scheduled work hours.
  • Other duties as assigned.

Essential Functions:

  • Minimum physical requirements to perform all duties and responsibilities, as defined by management.

 
Job Number: 1910102821
Job Location: Aurora, CO
Duration: 12 months
Input Date: 05/29/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jKKQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural engineer1

Description:
Basic Qualifications:
0 Years with Bachelors in Science in an Engineering discipline (i.e., Civil Engineering, mechanical Engineering, Naval Architecture, Ocean Engineering Aeronautical Engineering)
Preferred Design Disciplines:
Finite Element Analysis and Hull Scantling Analysis experience
Job Description:
Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
 
Job Number: 07012019-10Z
Job Location: Pascagoula, MS
Rate: $35
Per Diem: yes
Overtime: yes
Duration: VLT
Start Date: today
Input Date: 07/02/2019
Firm Name: TASC TECHNICAL SERVICES
Attention: Mark
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Advanced Electrical Instrumentation and Data Acquisition Systems)

Description:
The ideal candidate will:
• design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques.
• take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
o this can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include:
• the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
• daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
• Support laboratory testing of Space hardware,
• Develop and validate tooling concepts,
• Author and maintain operation/test procedures,
• Prepare standardized operation/test sheets,
• Define test rig and facility requirements,
• Participate on program Integrated Product Development teams,
• Review drawings and concepts, and
• Resolve productivity concerns.

Required:
• Experience with Advanced Electrical Instrumentation and Data Acquisition Systems
• Five (5+) years working on the testing of complex electrical systems,
• Testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers,
• Testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
• Applicant must have the capability of working independently and be self-motivated.
• Excellent communication skills, written and verbal.
• Ability to proficiently operate common Microsoft Office software products

Desired
• Knowledge of LabVIEW desired.
 
Job Number: 1910100496
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician VA

Description:
165324 Test Technician

Work Site Address: Chesapeake, VA 23323
Job Number: 9292141
Max Pay Rate: 25.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Under Limited supervision performs a wide variety of technical efforts including processes, tests, troubleshoots, and repairs digital equipment. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks. May work on Analog, Digital and/or video type circuits, Radio Frequency, and logic systems. Observes, analyzes and reports test data. Performs tests and utilizes various engineering drawings, manuals and other related documentation in the performance of their tasks.

Knowledge, Skills and Experience:
• 4-6 Year Experience testing Analog, Digital and RF circuitry. Ability to read and interpret drawings to perform measurements and troubleshoot electronic equipment. Strong problem-solving skills with the ability to proactively identify alternate solutions to overcome technical challenges.
• Experience using a wide variety electronic RF/Analog, High Voltage, Digital and other electronic test equipment such as Oscilloscopes, Network Analyzers, Signal Generators, Spectrum Analyzers.
• Must be familiar with various test equipment general purpose and special, program specific test stations, misc. measuring devices.

Required Education:
High School or equivalent

Work in industrial environment.
• Able to lift 35 lbs unassisted.
 
Job Number: MB-R9292141ATO
Job Location: Chesapeake, VA
Rate: 25/hr max
Per Diem: no
Duration: 12 months
Input Date: 08/02/2019
Last Updated: 08/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Tooling Designer- Secret

Description:
PDS Tech, Inc. is seeking a Tool Designer - Secret Clearance  for an open position in Wichita, KS 

Description :
  • Applies engineering principles and technical knowledge to the design and support of airplane manufacturing tools (e.g., access equipment and structures, handling and transportation, test equipment, gauges, assembly jigs, drill equipment, etc.)
  • Develops designs that include concept; analysis of structural, electrical, and mechanical systems; and definition of the tool, ensuring compliance with company and governmental processes, policies, and procedures. Identifies, designs, and implements advanced technologies to improve manufacturing processes.
  • Resolves concerns arising during the fabrication process and maintenance disposition, requiring such engineering principles as , circuit design, mechanics of materials, fluid dynamics.
  • Conducts trade and cost studies. Integrates define and produce activities across the tool family to ensure that parts meet definition and manufacturing plan requirements.
  • Provides technical knowledge and leadership to projects requiring key tool engineering competencies (e.g., jig and fixturing methods and concepts, hole preparation, automated drilling and fastener systems, test systems, part handling and transportation, etc.) to increase the efficiency of manufacturing processes.
  • Focuses primarily on achieving excellent customer service by leading process improvement activities, process and product optimization strategies, and technology development and software applications. Interfaces technical and administrative knowledge across programs, functions and organization boundaries and levels within the scope of assignment.
  • Creates and articulates accurate detailed instructions and media for the fabrication of detail, assembly, and digital database tooling.
  • Produces tool layouts and oversees the fabrication and verification of tool deliverables.
  • Lays out or creates computer-generated models in conjunction with numerical control data preparation for the fabrication of tooling deliverables (e.g., master tooling, computer-generated tooling, flat pattern layouts, computer master database models, etc.).
  • Acts as liaison, provides producibility and manufacturing input, and electronic measurement services for internal and external customers.
  • Monitors quality through statistical process control and other verification methods. Interfaces with production manufacturing, product definition, manufacturing engineering, and external customers.

 

Requirements:
DoD Clearance Required

NX Training preferred

Please contract Elisa Petersen at 316-448-0890 or send resume to epetersen@pdstech.com



 
Job Number: 1910103847
Job Location: Wichita, KS
Per Diem: No
Duration: 18 months
Input Date: 06/24/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRXOQA4&URLSource=cjhunter

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

Back to Advanced Job Search