Job Search Results

532 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/03/31 Tuesday 04:30PM Pacific Time by ContractJobHunter. )

Listings 1 - 532

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 12/20/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Houston, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
Must have a minimum of 2 years CRJ 200/700/900 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44337
Job Location: Houston, TX
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Minneapolis, Minnesota!

Job Description:
Inspect, test, repair, maintain, and service aircraft.
Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications
Perform visual inspections during assembly of part and after repair or installation of component.
Perform operational checks after maintenance is performed to ensure proper operation.
Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks
Disassemble and inspect parts for wear, warping, or other defects
Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment
Test engine and system operations, using testing equipment
Service and maintain aircraft systems.
Perform maintenance IAW FAA approved technical data
Research FAA technical data to locate applicable data relevant to assigned tasks
Other duties may be assigned
A&P Mechanic Job Requirements:
FAA Airframe and Powerplant license
Must have 3-5 years experience within commercial aviation
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals
Must be able to document maintenance performed on required forms
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models
Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)
Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines.
Practice safety conscious behaviors in all operational processes and procedures
High School Diploma or equivalent
Successfully complete a fingerprint-based Criminal History Records check prior to beginning work
Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds
Must be willing to work rotating or fixed shifts
A valid clear driver’s license
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49021
Job Location: Minneapolis, MN
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanic in Fort Worth, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s,
FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48131 / 44189
Job Location: Fort Worth, TX
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 09/30/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 01/17/2020
Last Updated: 02/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 03/17/2020
Last Updated: 03/31/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
166618 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2423-1
Max Pay Rate: $22.00/hr
Start Date: 10/30/2019
End Date: 11/1/2020

Job Summary:
Builds complex sub-assemblies using a variety of tools including crimpers, lugging devices, torque devices and other complex and basic hand tools. Builds complex structural assemblies using blueprints and processes.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Fabricates complex wire harnesses with a variety of complex connecting devices. Reads and interprets complex wire diagrams, blueprints, drawings and work instructions. Solders complex components in sub-assemblies using a variety of techniques including j-hooks, turrets, etc.

Qualifications and Education Requirements
Technical, vocational and/or related military technical degree in electronics or related discipline.
Mandatory 10 + years of experience in aerospace and/or DOD manufacturing or modification involving the installation or modification of electronical components and electrical systems.
Thorough understanding of electrical theory and excellent understanding of electrical schematics and drawing.
Previous experience working in an ESD environment.
Ability to work with little to no supervision.
Very strong solder skills are a requirement.
Good written and communication skills.
Computer skills must be intermediate to advanced.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years


Qty 3 positions
 
Job Number: LMRMS-2423-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 12/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Assembler II

Description:
Chipton-Ross is seeking an Assembler II for an opening in Asheville, NC.

RESPONSIBILITIES:
Works on a production line manufacturing product. Performs a wide variety of product assembly operations on product components, assemblies or sub-assemblies. Follows standard operating procedures in the production / assembly process according to design specifications and company quality standards. Visually inspects the unit before passing to the next cell. Works safely and ensures best quality products within current takt times. Fully engages with team and other associates to troubleshoot problems and drive continuous improvement in the plant.
" Selects appropriate components, aligns, and assembles them in proper sequence by drilling holes, adding rivets, screws, bolts, braces, tape, cement or solder to meet specifications in accordance to Sequence of Events (SOE). Applies wiring harnesses, sensors, and other electrical components recognizing color codes to insure that wiring and other color coded procedures meet guidelines. Reads electrical wiring diagrams to accomplish accurate assembly. Inspects parts during sub-assembly and at key points to ensure that unit meets specified quality standards prior to moving unit to the next workstation. Verifies that custom equipment changes have been made according to order and part number.
" Uses a wide range of hand tools, drill, rivet gun, saw, hy-pot tester, and drill press. Moves units or positions pieces manually or using work aids such as casters, cranes or forklifts.
" Cleans and packs final product using approved chemicals, Refers to Material Safety Data Sheets (MSDS) to insure safe handling and proper Personal Protective Equipment (PPE) is used around chemicals.
" Reorders raw materials and finished parts and maintains inventory accuracy using the correct part numbers and bin locations.
" Performs other duties, provides support and coverage on all operations on line as requested by supervisor. Cross training and flexibility required.
" Performs all duties using required safety procedures and equipment according to company policies and practices within guidelines of ISO standards, quality, and safety. Maintains clean and organized work area that supports co-workers as well as safety and efficiency.
" Engages, initiates, and suggest initiatives that support team goals and continuous improvement in process.
" Communicates effectively within cell or with other departments to relay key information. Open to and asks for suggestions of others regarding production issues and goals.
" Performs all job duties consistent with the Code of Ethics and Values, serves as a role model in the workplace. Trains and mentors new employees or transitioning workers in the area.
" Utilizes computer systems to check e-mail, complete on line training and complete Performance Management and Development (PMD) annual review process.

REQUIRED EXPERIENCE:
" Standing, bending, reaching and handling bulky parts is common to the job. Frequently lifts up to 35 pounds.
" Beginner Computer skills or willingness to learn.
" Ability to read and differentiate part numbers, labels, and work instructions.
" Manufacturing and experience using small hand and power tools is preferred.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st, 2nd and 3rd shifts, OT-Yes Mandatory every other Saturday
Full-Time

 
Job Number: 183166
Job Location: Asheville, NC
Rate: $14 to $15.00 DOE
Duration: 12 Months
Input Date: 11/20/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Tyler Harrell
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tharrell@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

Description:
166338 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2095-1
Max Pay Rate: $29.00/hr
Start Date: 10/7/2019
End Date: 1/31/2020
Position Type: Contract

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Job Description:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
• Experienced in troubleshooting and flight line operations a must

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



Qualifications and Education Requirements
Needs to be really experienced in troubleshooting and flight line operations

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

Qty 1 position needed
 
Job Number: JEG-2095-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 12/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university.
2. Experience in avionics or electronic warfare system integration and test.

Desired Skills:
1. Direct hands-on experience with system integration/testing and data analysis.
2. Willingness to contribute in both technical and non-technical areas to ensure team/program success.
3. Experience in product development and testing of supplier developed hardware.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11704
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166552
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2306-1
Max Pay Rate: $62.26/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university
Experience in avionics or electronic warfare system integration and test.
Desired skills
Direct hands-on experience with system integration/testing and data analysis.
Willingness to contribute in both technical and non-technical areas to ensure team/program success.
Experience in product development and testing of supplier developed hardware.

Qty 1 position
 
Job Number: JE-2306-1S
Job Location: Fort Worth, TX
Rate: 62.26/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
The ideal candidate should have thorough knowledge of Garmin avionics systems architecture and be capable of following electrical schematics. This position requires exceptional customer service attitude, teamwork skills, attention to detail, and the ability to work well with other service departments.

We offer very competitive salaries based on experience and ability. Avex offers health insurance, a dental plan, 401(k), paid time off, public holidays, free training. We will also offer relocation assistance for the right candidate.

The position currently available for candidates who meet the following requirements:

• Minimum of 3 years of General Aviation or Corporate avionics and instrument installation
• Minimum of 1 year of experience with Garmin systems (G600, G1000, and G3000)
• System repairs
• Familiar with altimeters
• Altitude reporting systems
• RVSM checks
• Pitot/static and transponder system testing
• Troubleshooting and repair of systems mainly, Garmin units
• Datalink Weather and Traffic Systems, GPWS, etc.

The following are preferred qualifications:

• Previous installation experience on various makes and models of MFD, GPS, Nav/Com
• Familiar with G600 installs, L3 trilogy, GTN750, GMX200, GTS820, & GTX33/32
• Previous Garmin, Honeywell, and L3 is experience a plus.
 
Job Location: Camarillo, CA
Start Date: ASAP
Input Date: 11/27/2019
Firm Name: SEZ AEROSPACE USA LLC
Attention: Addie Kimbell
Address: 1775 9TH ST
City, State: MOBILE, AL 36522
Phone: 251/438-6865
Website: www.sezaerospaceusallc.com

Build Reliability Engineer

Description:
Chipton-Ross is seeking a Build Reliability Engineer for an opening in Hawthorne, CA with SpaceX to work on an exciting, new program.

DIRECT

POSITION OVERVIEW:
The Build Reliability organization at SpaceX is an inter-disciplinary team that ensures the reliability of flight components and production assemblies. Your breadth of exposure as a Build Reliability Engineer will be immense as you partner with every other core group at SpaceX, guiding the hardware from cradle to grave. You use data-driven decision making to actively represent quality objectives in design and development teams and to drive improvements in reliability on the manufacturing floor. You have the ability to dive deep on the details to identify and solve difficult technical problems, but you can also utilize a system level approach to prioritize issues for the vehicle as a whole. You thrive in a hands-on environment and will spend time in the office, on the factory floor, and in the lab to execute on the mission to bring the capability of flying astronauts back to the United States.

RESPONSIBILITIES:
Partner with Vehicle Engineering and Production teams during all development phases to analyze and create reliability plans for vehicle programs including identification of key characteristics, prototype testing for manufacturability, first article and detailed inspection planning, evaluation of previous non-conformance and lessons learned, and other manufacturing and quality tools as required
Lead the development of test plans and processes and partner with inspectors to ensure quality goals are met in a timely manner
Lead first build reviews to ensure transparency of design intent, design requirements, design and manufacturing risks, and manufacturability of design
Lead, facilitate, and participate in root cause investigations in their respective work centers
Lead containment of all suspect product including but not limited to providing guidance to quality inspectors, technicians, and shop supervisors to assist in quarantining of all suspect product
Design and develop inspection plans as required for process or design changes, ensure inspection/test criteria are objective with clear pass/fail criteria, and assess new processes for safety and product risks

REQUIRED EXPERIENCE:
2+ years of experience in a quality, manufacturing, or design engineering role (student project team or internship experience is also applicable)
Ability to work extended hours, weekends, and offsite as needed. Some travel may be required.

PREFERRED EXPERIENCE:
Experience supporting production of complex electro-mechanical, mechanical, or composites systems in high volume work centers and/or during production ramp-up
Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches
Dedicated to adopting a Lean approach to quality without compromising safety or reliability

EDUCATION:
Accredited Bachelor's degree in aerospace engineering, manufacturing engineering, materials engineering, mechanical engineering, electrical engineering, or engineering physics

WORK HOURS:
Ability to work extended hours, weekends, and offsite as needed.
Full-Time

 
Job Number: 183181
Job Location: Hawthorne, CA
Rate: $DOE
Duration: Direct
Input Date: 11/20/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Senior ASIC / FPGA Engineer

Description:
CL - Senior ASIC / FPGA Engineer
Job ID # 2019-10245
Direct Hire Opportunity
Location: Scottsdale, AZ
Industry: Defense
Clearance Requirement: Secret
Minimum Education: Bachelor’s Degree
Minimum Experience: 8 years

What You’ll Do:
• Responsible for definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments.
• Determine architecture, system simulation and detailed design approach.
• Define module interfaces and all aspects of devise design and simulation.
• Evaluate the process flow including but not limited to high level design, synthesis, place and route, timing and power utilization.
• Create test and simulation plans that establish functional criteria.
• Verify test results and analyzes performance.
• May also review vendor capabilities, foundry technologies, device libraries and simulation tools.
• Contribute to the generation and maintenance of work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers.
• Develop and present requirements, concepts, designs, decisions and results to internal management, other organizations, team mates and customers.
• May contribute to technical subcontract management that may include SOW development, proposal evaluation, source selection, technical oversight, and subcontractor work product evaluation and acceptance.
• Review vendor capability to support product development.
• Apply a strong understanding of the organizationally defined processes throughout the lifecycle of the program or project.
• Participate in the improvement of the ASIC/FPGA organizational processes.
• Support the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the development life cycle.
• Lead the research and analysis of data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application.
• Select components and equipment based on analysis of specifications and reliability.
• Contribute to the technical approach on small proposals.
• Provide leadership and/or direction to lower level employees.
• Lead technical tasks for small teams or projects.
• Exercise latitude in determining technical objectives of assignments.
• Guide the successful completion of major programs and projects.

What You’ll Need:
• Department of Defense Secret Security Clearance is required at time of hire.
• Contribute to the development of new theories and methods in ASIC/FPGA engineering.
• Very strong knowledge of other related disciplines.
• Very strong understanding of ASIC/FPGA engineering processes.
• Very strong awareness of business objectives and Engineering's role in achieving.
• Very strong proficiency in Microsoft Office applications.
• Very strong written and verbal communications skills.
• Ability to think creatively.
• Ability to multi-task.
• Very strong skill in communicating issues, impacts, and corrective actions.
• Very strong ability to recognize and clearly report information relevant to sound engineering design.
• Very strong understanding of basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls.
• Provide resolution to problems to a diverse range of complex problems which require the use of ingenuity and creativity.
• Frequent contact with managers within and outside of Engineering.
• Frequent contact with project teams across the company.
• Frequent contact with external customers and vendors.
• Occasional contact with Business Development.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor's Degree in Electrical or Computer Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 8 years of relevant experience; or Master's Degree with a minimum of 6 years of relevant experience.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10245
Job Location: Scottsdale, AZ
Input Date: 11/20/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 03/31/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM
 
Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design
 
Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/06/2019
Last Updated: 12/04/2019
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Diagnostics Engineer

Description:
Diagnostics Engineer

Job ID # 2019-10276

Contract Opportunity

Location: Sterling Heights, MI

Industry: Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 1-3 years

 

What You’ll Do:

This position is for an entry level Diagnostics Engineer responsible for conducting detailed analyses and assessments of evolving and approved designs in support of the development of troubleshooting support documentation.
Interface with hardware and software design engineers to understand the functionality of equipment.
Conduct detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to fault isolate/troubleshoot and support the design.
Translate engineering & other technical information into troubleshooting source data (procedures and schematics) in support of Integrated Logistics Support (ILS) product development.
Perform on-vehicle fault insertion to verify that equipment and troubleshooting procedures function properly.
 

What You’ll Need:

Some travel may be required up to 5%.
Ability to read and interpret schematics and hardware/software specifications.
Proficient with MS Office applications (Word, Excel, PowerPoint, Access required; Visio preferred).
Experience in fault isolation and/or troubleshooting of complex systems (including automotive or military preferred.
Experience with wiring diagram and schematic development preferred.
Strong interpersonal and communication (oral and written skills) desired.
Familiarity with US Army logistics support structure, policies and procedures preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Electrical Engineering required. Other Degrees will be considered based on experience.
1-3 years of experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10276
Job Location: Sterling Heights, MI
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2019-10288

Contract Opportunity

Location: Oklahoma City, OK

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Associate’s Degree

Minimum Experience: 3 years

 

What You’ll Do:

Wire Harness Design Support is a unique opportunity to use electrical skills. This position also allows the possibility to see released engineering be installed while supporting the build during shipside support.
During the design phase include:
Analyze functional schematics and wire diagrams to understand system design.
Develop and maintain cable/wire harness detail and assembly designs.
Perform design reviews to validate spatial integration and requirements verification.
Develop and maintain electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry).
During the build phase:
Provide engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Work under general direction.
Support the development, maintains and releases electrical/mechanical drawings, systems design or engineering documentation and data by applying company, industry and governmental standards.
Using design tools, prepare documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Works under general direction.
 

What You’ll Need:

Ability to obtain a Secret Security Clearance is required at time of hire, an active Secret Security Clearance is preferred.
Some travel may be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 3+ years of related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 year of related work experience, 5 years of related work experience, etc.).
Bachelor’s Degree preferred but not required.
5+ years of designing or supporting electrical wire harness Design and Installations


What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10288
Job Location: Oklahoma City, OK
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2019-10291

Contract Opportunity

Location: Oklahoma City, OK

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Associate’s Degree

Minimum Experience: 5 years

 

What You’ll Do:

Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see released engineering be installed while supporting the build during shipside support.
During the design phase:
Analyze functional schematics and wire diagrams to understand system design.
Develop and maintain cable/wire harness detail and assembly designs.
Perform design reviews to validate spatial integration and requirements verification.
Develop and maintain electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry).
During the build phase:
Provide engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Works under general direction.
Support the development, maintains and releases electrical/mechanical drawings, systems design or engineering documentation and data by applying company, industry and governmental standards.
Use design tools prepares documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Works under general direction.
 

What You’ll Need:

Ability to obtain a Secret Security Clearance is required, an active Secret Clearance is preferred.
Defense Experience preferred but not required.
Some travel may be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

5+ years of designing or supporting electrical wire harness Installations.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 5+ years of related work experience or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10291
Job Location: Oklahoma City, Okalahoma
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Many needed - HOT***

Description:
*Wire Harness/Electrical Insallation
*Catia V5
*5+ years designing or supporting Wire Harness Design.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK-Wire 3
Job Location: Oklahoma City, OK
Rate: $50.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 12/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Elect Design and Analy Engr 4

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 12+ Months

Description:
The Electronics Products Shared Integrated Product Group at The Client Company's Satellite Development Center in El Segundo, California is seeking an experienced electrical engineer whose area of expertise is electronics test and automated test system design. Our automated test systems include those designed for testing RF/microwave/millimeter-wave electronics, power electronics, and digital electronics for space applications. Units requiring automated test range from single-board computers to switching networks, modems, and microwave electronics used in space-based applications. The person in this position will be responsible for test system architecture definition, hands-on test development and test system design, verification, validation and documentation, as well as providing project management and leadership for less senior personnel.

Applicable skills for this position range from test software development to electronics hardware specification and design. Experience in control, analog, digital or power supply circuit design is desired. Software/coding experience using LabView, Test Stand, C/C#, Python, FPGA Verilog/VHDL, and Matlab Signal Processing is a plus. Understanding intermodulation distortion, phase noise, and spurious measurement test techniques and familiarity with S-parameters is also a plus. Strong writing and presentation skills are required.

Responsibilities:
- Leading design teams of 2 to 10 people in automated test system development activities with cost and project schedule accountability
- Development of test system requirements and verification methodologies
- Make recommendations for test equipment procurement
- Hands-on design, documentation and design leadership of automated test system development projects
- Lead STE design reviews showing adherence to STE development processes
- Supporting test system proposals and bids
- Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage
- Participate in STE personnel development through mentoring and group presentations

Skill Code: 608-Elect Design and Analysis Engr-General

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree
 
Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer

Description:
Electrical Design and Analysis Engineer
Job ID # 2019-10255
Contract Opportunity
Location: Oklahoma City, Ok
Industry: Aerospace & Defense
Clearance Requirement: Ability to Obtain – Top Secret
Minimum Education: Bachelor’s Degree
Minimum Experience: 2 years

What You’ll Do:
• Experienced Electrical Circuit Design Engineer.
• Maintain detailed requirements and specifications for various electronic products.
• Develop detailed designs of limited scope.
• Conduct various methods of testing and analysis to support design.
• Gather data for technical performance measures and performs basic analysis.
• Provide basic engineering support throughout the lifecycle of the product.
• Conduct trade studies and literature research to support future product designs.
• Work under general supervision.
• Mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects.
• Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.
• Assignments may deal with
• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration.
• Perform Trade Studies/Modeling.
• Cross-functional coordination and integration.
• Develop Design Requirements and Plans.
• Provide Engineering Support to Supplier Management Procurement Activities.
• Perform Engineering Investigations and Troubleshooting Efforts.
• Develop and perform Acceptance Test Procedures.
• Test Automation for aircraft modifications.
• Other job responsibilities may include
• Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
• Develop high-level and detailed designs consistent with requirements and specifications.
• Validate designs through various methods of review, testing and analysis.
• Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
• Support Supplier Management with make/buy recommendations and other technical services of limited scope.
• Provide engineering support throughout the lifecycle of the product.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.

What You’ll Need:
• This position requires the ability to obtain a Top Secret Security Clearance at the time of hire.
• Must be willing and able to travel up to 25% of the time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor's Degree and typically 2+ years of experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Required: Bachelor or Master Degree from an accredited course of study, in engineering, com

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10255
Job Location: Oklahoma City, Okalahoma
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Active Secret or Interim required
The ideal candidate will have knowledge in one or more of the following areas:
• RF seeker design, manufacture and test including familiarity of seeker components including antennas, transmitters, receivers and transceivers
• Digital and/or analog CCA design, integration and test
The position will require frequent interaction with hardware subcontractors to oversee design, test and manufacturing activities. Candidates will be expected to provide solutions to a variety of technical problems of moderate scope and complexity, working under minimal supervision. Successful candidates should expect to be immersed in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive.

Responsibilities include:
• Leading the integration and testing of Complex RF or Electrical subsystems
• Performing subsystem analyses including the characterization and modeling of electrical subsystems
• Troubleshooting hardware and process issues down to CCA and/or component levels
• Resolution of issues on production lines and in testing (including suppliers)
• Failure analysis / root cause determination and corrective action implementation
Required Skills:
• Ability to trade cost, performance, and packaging approaches for electrical subsystems
• Knowledgeable in the hardware lifecycle from requirements definition and architecture development through integration and verification, and production support
• Experience with any of the following tools: High Frequency Structure Simulator (HFSS), Advanced Design System (ADS), SystemVue, SystemVision, PSpice, MATLAB, Mentor Graphics DxDesigner, System Vision, MathCad, IDL, Computer Simulation Technologies (CST), Microwave Design Studio and Advanced Design System (ADS)
• Experience supporting Production and/or Test of electrical sub-systems in a manufacturing environment
• Expert knowledge of RF, analog, digital, and/or mixed signal circuit design and analysis
• Experience in Root-Cause Corrective Action investigations
• Knowledge and experience proposing and implementing Engineering Change Notices
• Experience in resolving production issues with suppliers and sub-tier suppliers
• Technical writing and formal presentation experience
• Experience in applying SPC methods in achieving production yield improvements


Desired Skills:
• Experience performing electrical engineering design of CCA, RF Seeker/Sensor, or electronic subsystem including; circuit design, CCA assembly, electrical test and production support
• Experience performing integration and testing of RF component, RF Seeker/Sensor, and/or RF electrical subsystem
• Knowledge of printed circuit board fabrication and circuit card assembly processes and related industry specifications
• Leadership of large technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination and preparation of detailed technical team reports
• Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems
• Experience with subsystems integration and test
• Experience with test equipment, test automation scripting, test conduction, sensor control
• Experience with post test flight analysis
• Test problem investigation experience
Education:
• B.S./B.A. in Engineering, Science, or Mathematics
• Major(s): Electrical Engineering or Electrical Engineering Technology with over ten (10) years of experience
• Masters degree in Engineering preferred
 
Job Number: 52056
Job Location: Tucson, Az
Duration: 12 months
Start Date: ASAP
Input Date: 11/21/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Job Title: Electrical Engineer
Location: Riviera Beach, FL
Duration: 1 year with possible extension

Job Description: Researches, develops, designs, and tests electrical components, equipment, systems, and networks for underwater vehicles and systems.

This position requires experience in selecting and designing electronic assemblies. The position also entails requirements review, component selection, creation of design packages, and generation of test procedures.
The engineer will be responsible for supporting the design development through the release cycle. The position requires research, design, development, and testing of complex electrical designs including documentation development, hands-on test and troubleshooting, and formal documentation of the electrical design. Programs require broad electrical support, including issue resolution to distributed I/O architectures, RF systems, remote test station equipment, fiber optics interconnect, network troubleshooting, and power distribution systems. Work across disciplines
during integration and test activities is required. Experienced with underwater vehicles desired.
 
Job Location: Riviera Beach, FL
Rate: OPEN
Per Diem: YES
Overtime: YES
Duration: 1 Year
Start Date: ASAP
Input Date: 11/19/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Engineer

Description:
Strong understanding of RF systems, measurement, and design; strong understanding of digital test and measurement, and FPGA and embedded design using C, C++, Labview or Altera software; integrate hardware and software into ATE systems


U.S. citizenship or permanent residency required

- Paid Holidays
- Dental
- Blue Cross/Blue Shield Medical Insurance
- Vision
- Direct Deposit
 
Job Number: EE1
Job Location: Texas
Input Date: 11/18/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Jerry Rothchild
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
800 Phone: 800/837-9114 x2705
Email: jrothchild@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
We have a great opportunity for Electrical Engineer in Saginaw, Michigan

 

This is six-twelve month contract with Direct hire possible after six months.

Consultants assigned to the Company must be degreed [minimum of a Bachelor of Science in Electrical Engineering, Masters a plus] electrical engineers with expertise in actuator systems, including but not limited to, solenoids, linear or brushed motors.

Consultants assigned to the Company must sign the Undertaking referenced in Section 9 of the Non-Disclosure Agreement prior to starting employment.

 

Duties:

 

  • Support the Company’s Sr. Electrical Product Engineer’s current project with a potential Customer; 

  • Must have an in-depth understanding of how solenoids and linear motors are designed and the optimal processes for manufacturing these components;

  • Create a statement of requirements for the supplier; 




  • Define and oversee the design validation of electrical components; 




  • Help to define assembly level test requirements for function and quality 




  • Assist with the evaluation of each suppliers’ design and manufacturing proposal 

  • Will be in direct communications with Suppliers and be able to communicate technical information with a clear understanding. 

  • Launch experience is a plus. 

  • Mechanical electrical background a plus.


 

 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33545
Job Location: Saginaw, MI
Rate: 100000.0USD/Year
Per Diem: --
Overtime: --
Start Date: 2019-08-13 00:00:00.0
Input Date: 08/13/2019
Last Updated: 01/07/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Lexington, KY
$21.50/hr - $68/hr
1 year W2 contract
First Shift, 5/40
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Requires a BSEE from an accredited University.
 
Job Number: 11310
Job Location: Lexington, KY
Rate: 45.00-68.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/09/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/29/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 5

Description:
LOCATION Orlando, FL

DESCRIPTION General Summary
Looking for a Sr. Electrical Design Engineer specializing in analog and high-speed digital circuit design to join our Aerospace and Defense team responsible for designing and developing modern communications test systems and solutions. In addition to developing new designs and architectures, the candidate must have solid experience in all phases of new product development; from conception to production.
Principal Duties and Responsibilities
 Responsible for the total end-to-end process of capturing requirements, designing, developing, validating, testing, documenting, and transition to manufacturing of electrical and electronics systems and subsystems.
 Work as part of a cross-functional product development team to effectively plan and execute electrical PCB designs to meet critical project requirements and deadlines.
 Perform schematic capture and direct PCB layout.
 Define and document characterization and calibration methodologies, Validation and Verification (V&V) plans, and lead the V&V process for individual designs.
 Work with cross-functional teams across the United States to support new product development and sustainment activities.
 Mentor other engineers and participate in design review activities.
Job Specifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

POSITION REQUIREMENTS Qualifications
1. Experience and understanding in the application of principles, theories, concepts, practices, and standards relating to modern software-defined architectures and synthetic instrumentation designs.
2. Demonstrated expertise in PCB stackup definition and trade-off analysis, including physical geometry, material selection, crosstalk mitigation, return path management, and manufacturability.
3. Extensive experience with simulation tools, such as LTSpice and HyperLynx
4. Extensive experience and thorough understanding of modern high-speed bus interfaces, including but not limited to USB 3.x, DDRx, PCIe Gen 2/3, Gigabit Ethernet, JESD 204B, and FPGA SERDES interfaces.
5. Experience developing complex mixed-signal designs and architectures.
6. In-depth understanding of schematic capture, circuit design, design tools, circuit simulation, and circuit layout design, techniques, and verification methodologies.
7. Expertise in developing design documentation and test instructions/procedures.
8. Expertise in taking a product design from concept to production.
9. Expertise in design for manufacturability (DFM) and design for test (DFT).
10. Provide technical leadership in complying with regulatory agencies in order to meet safety and Electromagnetic Compatibility (EMC) requirements.
11. Strong analytical reasoning and problem solving skills with knowledge in performing root cause analysis and recommending corrective action to resolve test failures.
12. Ability to act as an engineering lead and subject matter expert for one or multiple concurrent projects involving cross-functional teams in multiple geographic locations.
13. Must be a US person.
Education/Experience:
1. Bachelor’s in Electrical/Electronics Engineering (BSEE) or related field is required, Master’s Degree (MSEE) is preferred.
2. 15+ years of experience in Electrical Design.
Computer Skills:
1. Experience with Altium Designer for schematic capture and layout.
2. Experience with simulation tools, such as LTSpice, HyperLynx, ADIsimCLK, etc.
3. Experience with software and firmware development languages, such as C, C++, C#, VHDL, MATLAB, and LabVIEW is a plus.
4. Proficient in Microsoft Office
 
Job Number: 1001
Job Location: Oralndo, FL
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 6-12monts
Start Date: Q1
Input Date: 11/21/2019
Firm Name: EXPLEO GROUP
Attention: Faith Wilson
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 07/15/2019
Firm Name: PDS TECHNICAL SERVICES
Email: epetersen@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.




The Structures Company is an AA/EOE.
 
Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/13/2019
Last Updated: 03/31/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

*Job Description
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

*Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

*Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and/or NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
 
Job Number: 11794
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 2
Start Date: ASAP
Input Date: 10/29/2019
Last Updated: 11/26/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.
 
Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/11/2019
Last Updated: 12/13/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.


Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB
 
Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 02/03/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Rig Engineer

Description:
Electrical Test Rig Engineer

Windsor Locks, CT
$37.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manage small projects in development, coordination and conducting of technical reliability studies and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans. . Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability. Compilation and analysis of performance reports.

Additional:
This position seeks a professional in the electrical test rig design field. The candidate will provide professional electrical engineering and project management experience to designated projects and assignments. Responsibilities include design, development, verification and documentation of electrical test rigs and equipment used in acceptance testing of hardware. This candidate may also support systems that, processes, methods and procedures for calibrating measurement and test equipment based on analysis of measurement problems, accuracy and requirements.

The candidate will work well with all functional groups and good communication skills at all levels are required. Candidate will interface with Test Engineers, Program Personnel, and Space Lab personnel. Responsibilities include designing, specifying, purchasing and constructing electrical test rigs and electrical components for special test equipment. Create work instructions for lab associates to assemble designed equipment and provide hands on involvement by being available to direct the work. The candidate will also prepare Rig 'Operation Manuals' and continue to provide engineering support after release of the rig to the production area.
 
Job Number: 11729
Job Location: Windsor Locks, CT
Rate: 37.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/17/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrician Maintenance NC

Description:
166833
Job Title: Electrician Maintenance

Work Site Address: Fort Bragg, NC 28303
Job Number: 2607-1
Max Pay Rate: $30.00/hr
Desired Start Date: 12/9/2019
End Date: 6/9/2020
Position Type: Contract

Job Summary:
Repairs, constructs, installs, troubleshoots, and maintains routine electrical systems and equipment.

Cuts, threads, bends, couples, and straps conduit. Cuts wire and conduit to length. Installs, repairs, or replaces switch boxes, light bulbs, plugs, sockets, light fuses, and extension cords. Disassembles motors, generators, and other equipment in preparation for repair. Troubleshoots electrical malfunctions, inspects circuits and wiring of shielding and grounding, and tests electrical equipment for safety and efficiency. Uses blueprints, drawings, layout, or other specifications, and electrical hand tools and voltage-or-amperage measuring and recording devices.

Qty 1 position
 
Job Number: JE-2067-1ATO
Job Location: Fort Bragg, NC
Rate: 30/hr max
Duration: 6 months
Input Date: 11/19/2019
Last Updated: 01/08/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 03/31/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environmental Effects Engineer

Description:
Electromagnetic Environmental Effects Engineer

Location: Fort Worth, TX




The Electromagnetic Environmental Effects (E3) Engineer is responsible for developing, managing and communicating the E3 methodology to internal and external customers.


Position Responsibilities:

Applies engineering principles to investigate, analyze, plan, design, develop, implement, test, and evaluate air vehicle, weapons, and avionics with respect to E3 systems engineering.
Develops and communicates E3 approach and methodology to management.
Determines System level E3 targets and work with IPTs to develop IPT level targets.
Performs air vehicle and systems level analyses to verify performance.
Plans, supports, and leads E3 testing to meet qualification requirements.
Works closely with IPTs to review evolving design and provide E3 input into their decisions, providing E3 impacts to all Design Decision Notices.
Tracks, designs and develops E3 estimates based on preliminary and detail design layouts.
Suggests design improvements / spiral opportunities to improve E3 performance.


Education Requirements:

Bachelor's Degree in Engineering is required. Major in Electrical Engineering is preferred.
Major in Aerospace Engineering or Mechanical Engineering may be considered with sufficient experience.
Masters Degree is preferred.

Position Requirements:

At least 9 years of E3 experience on airborne platforms.
Expertise in aerospace design and verification processes to include requirements development and verification.
Skilled in preliminary and detailed design
Proficiency with MRP, Planning, Manufacturing is strongly preferred.
Must have the ability to communicate efficiently and effectively to coordinate E3 activities, prioritize tasks, and report status.
Must be able to build and maintain effective relationships with customers, internal
and external suppliers, as well as horizontal integrations across the other teams.
PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.
Must have the ability to work effectively within a team.
Good interpersonal and organizational skills are required.


EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.



This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58193
Job Location: Fort Worth, TX
Per Diem: Possible
Start Date: ASAP
Input Date: 11/19/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 3 CA

Description:
166956 Engineer Manufacturing 3 (Job Number: 19035489)

Max Pay Rate: $44 - $48/HR

Shift: Multiple

Target Start Date: Apr 6, 2020

Target End Date: Apr 2, 2021

Work schedule: 4/10

Duration: Up to 1 year

Location: Palmdale, CA

# of positions: 4

Manufacturing Engineering job duties involve the following: provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design, participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during assembly, define sequence of operations for product builds, investigate and initiate corrective actions and improvements that involve non-conforming product and identify improvement opportunities in areas that require producibility and affordability initiatives. Provide liaison support for Engineering definition to influence low production costs for integrated assembly related to electrical, hydraulics, fuels, fluids and propulsion systems.

Manufacturing Engineers for Aerospace Systems are expected to provide technical solutions to a wide range of complex and difficult problems. They are problem solvers who have the ability to provide results that are innovative, thorough, practical, and consistent with organization objectives. We seek Manufacturing Engineers that use a unique skill set that includes a hands-on approach and act as the technical representative voice for the Manufacturing organization.

•Minimum of a Bachelor's Science Degree in STEM (Science, Technical, Engineering or Mathematical) and 5 years of experience in manufacturing engineering or an engineering related field.
•Experience reviewing and interpreting Blueprints and 3-D models
•Experience with Microsoft Office Suite and Enterprise Resource Planning (ERP) systems
•Ability to interface/communicate with multiple levels of leadership, clients, and vendors

Preferred Qualifications:

•Composite experience and process knowledge
•Experience working hands-on in a production assembly line environment
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Extensive experience in any of the following subjects:
Electrical
Systems
Composites
Automation
Tooling
 
Job Number: JK-1826ATO
Job Location: Palmdale, CA
Rate: 48/hr max
Per Diem: pd split possible
Duration: 1 year
Input Date: 12/30/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineering Tech

Description:
PDS Tech is currently recruiting for an Engineering Tech for a client of ours in Hollister, CA.  Please send your resume to pzack@pdstech.com for consideration.  
 
  • Under manager supervision, build, test, debug, and repair development hardware per engineering drafted work instructions
  • Provide design and process improvement feedback to engineers.
  • Able to work with minimal direction
  • Fabricate test samples to perform various mechanical, ballistic, electrical and chemical tests to support development programs per engineering drafted work instructions.
  • Knowledgeable in basic inspection and hand tools
  • Interpret drawings and instructions
  • Requires travel up to 20% of the time
  • Soldering experience including use of heat guns for shrink tubing operations a plus.
  • Leverages other factory resources and personnel to get work done for the team
  • Must be willing and able to obtain a security clearance
  • Perform other related duties as assigned
  • Ability to train other associates as needed.
  • Section inert welded parts a plus.
  • Ability to perform basic machining functions (no energetic parts). 
  • Oversees build and testing process flow of development hardware.      

  • Education Required:          High school diploma or equivalent.  Technical training and job related certifications preferably in special processes.
  • Experience Required:        3-5+ years directly related experience in a manufacturing and/or engineering proto type environment.

 
Job Number: 1910107309
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/26/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMSlQAM&URLSource=cjhunter

FAA Technician - Electronic - Level 2

Description:
PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • Ability to READ SCHEMATICS a PLUS- To diagose and repair circuitry
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 2-4 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS - Fine Pitch, Surface Mount and/or Through hole
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  •  
  • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st, 2nd or 3rd shift.
  • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
  • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

Please send your resume to mmarquez@pdstech.com today!!
 
Job Number: 1910109061
Job Location: Olathe, KS
Duration: 6 months
Input Date: 11/11/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVDRQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/20/2019
Last Updated: 12/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities layout / Manufacturing process Industrial Engineer

Description:
Facility Designer with special emphasis in Aeronautical Industrial Building design and integration, you will interface with the Facility Engineers, Process Engineers, Manufacturing Engineers and Maintenance staff to layout new facilities(Greenfield), utilities, structural components and equipment to ensure a fully functional project is provided to the end user, taking into consideration the ease of manufacturing, availability of materials, and constructability of the final product.

•Must be able to take concept drawings and sketches and produce a full complement of Architectural, Mechanical, Plumbing, HVAC, Electrical, etc drawings in accordance with the National CAD Standards.
•Uses geometric tolerancing methods to check fit, form, and function of the accuracy and content of Engineering CAD drawing and model files, PLM datasets and BOMs, and other engineering supporting documents.
•It is expected that the Facility Designer can perform routine sizing of piping and ductwork systems with final approval from the cognizant design engineer.
•Capable of developing restroom layouts, break room layouts, conference room layouts office furniture layouts, etc for use in new construction and remodel efforts.
•Able to integrate Structural and Architectural designs with other relevant disciplines such as Plumbing, Fire Suppression, HVAC, Electrical, etc.

o Bachelor’s Degree in relevant field. (education will be verified)
o Minimum of 5/10 years’ experience in light Industrial Facility and equipment designs.
 
Job Number: 222471
Job Location: Huntsville, AL
Rate: Hourly Rate 'Open'
Per Diem: yes
Overtime: possible
Duration: NEW project from the ground up - long term
Start Date: 2 weeks
Input Date: 10/31/2019
Last Updated: 03/19/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / Electrician for commercial facilities - Clearance URGENT NC

Description:
165718 Job Title: Facility Operations Analyst

Work Site Address : Fort Bragg, NC 28303
Job Number: 1810-1
Max Pay Rate: 24.50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020


Job Summary:
Responsible for repairing and installing electrical systems in new industrial construction and maintaining electrical equipment and wiring. Must be able to identify, troubleshoot and repair problems in electrical wiring that occur in an industrial setting. Expected to be able to run tests, isolate problems, replace faulty sections of wiring, and lay conduit for the new electrical systems. Work well with public as well as with co-workers and willing to listen to others.

Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Qualifications and Education Requirements
Must have good math skills, as need to take measurements and work with numbers.
Must also be able to read blueprints. Should have good overall knowledge of all building electrical systems and electrical theory.
Requires lifting up to 55 pounds and moving it without assistance between building and across campus effectively and efficiently
Must have a journeyman electrical license.
Must be able to pass CRC Physical Assessment

Qty 1 position needed

In need of an Electrician for commercial facilities. Please ensure that the candidates are technically qualified. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1810-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 6 months
Input Date: 11/19/2019
Last Updated: 12/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104858
Job Location: Metairie, LA
Duration: 18 months
Input Date: 07/25/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUzxQAG&URLSource=cjhunter

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technician for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.

 
 Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108506
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIIQA2&URLSource=cjhunter

Flight Test Instrumentation Technologist

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technologist for a direct position in Moses Lake, WA.
Summary

As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Fabrication of support brackets and sheet metal parts
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108504
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSI8QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Hardware Development Engineer (JPSS program)

Description:
The candidate will: •Perform Hardware/Electrical Engineering design, analysis and testing of electronics and RF subsystems.
•Represent Hardware Engineering in development and evaluation of system architectures, designs, and interfaces that meet system specifications.
•Prepare and present hardware specifications and design analysis in program reviews.
•Participate in Trade Studies and Vendor/Product selection.
•Participate in engineering discipline process development and deployment on programs.
•Insure organizational processes are followed and create program specific work instructions when necessary.
•Support may also include working with other organizations, coordinating common and efficient cross-factory environments (both hardware and software), tools, process, and methods.

Key responsibilities for the qualified candidate include: •Responsible for assisting in trouble shooting the Space to Ground Interface, including RF equipment and antennas
•Responsible for working with team members to resolve operational issues in an urgent manner
•Responsible to create design documentation, perform reviews with team members and vendors, and follow program and corporate process
•Responsible to work with the team to create System Operating Procedures

Required Skills:
•BS degree in Electrical Engineering specializing in RF and Communications fields
•Experience with RF/Baseband and signal processing design, development, and hardware testing
•Experience with preparing statements that convey the fundamental characteristics of the design objective, creating and presenting reports
•Experience with writing and reviewing manuals, procedures, plans, specifications, engineering drawings and notebooks
•General knowledge of communication protocols, digital signal processing, RF signal types and levels
•General knowledge of common information system (computer) hardware interfaces
•Must be proficient with Microsoft Office applications such as Word, Excel, and Power Point
•Must be familiar with Satellite Ground Station facilities and operations
•Periodic travel required to support upgrades at Ground Stations in CONUS and OCONUS
•U.S. Citizenship status is required. No clearance needed but needs to have ability to obtain a Common Access Card (CAC) to access government systems.

Desired Skills
•Experience with VHDL, FPGA design and coding, firmware and embedded software
•Experience with analyzing system parameters to ensure requirements are met using analytical tools
•Experience with MATLAB
•Experience with performing trade studies, recommending solutions and identifying potential vendors
•Experience with developing bill of material required to produce product and initiate the purchasing process and monitor progress
•Experience with collecting and reporting time and material estimates based on requirements.

Required Education
•Requires a degree in Science Technology Engineering or Math (STEM) with emphasis in RF design and a minimum of 4+ years of experience or 12 years experience in lieu of a degree
 
Job Number: 1910106380
Job Location: Aurora, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Hazardous Materials Specialist

Description:
PDS Tech, Inc. is seeking a Hazardous Materials Specialist, in San Marcos, TX.

Summary:.

  • Support all EH&S programs and issues to ensure the protection of employees from industrial accidents, occupational and environmental health hazards, and fire.

Design, development, interpretation, recommendation, and compliance with environmental regulations and/or company policy in conjunction with one or more of the following areas:

  • Workers Compensation, Occupational Heath & Safety, Medical Assistance or Environmental Engineering.

Additional Job Details:    
  • This position is for an EHS professional who works independently, executing initiatives and programs across multiple EH&S disciplines, and monitors local performance and supports practices to achieve and maintain compliance.
  • Support EHS manager by developing materials for EH&S trainings, achieves and maintains standard documentation, and provides updates to processes and programs to enhance EH&S performance.

Primary Responsibilities:

  • Executes initiatives, programs, procedures, reports, permits and trainings across multiple EH&S disciplines, as required to achieve and maintain compliance.
  • Monitors local performance against EH&S regulatory requirements to achieve and maintain conformance.
  • Supports business partners’facilities and employee practices to achieve and maintain understanding and compliance with EH&S regulations.
  • Contributes to required environmental regulatory reports and submissions to achieve and maintain standard documentation.
  • Assists and develops materials for EH&S training and communications on subjects required by regulations such as confined space, respiratory protection, compressed gases, electrical safety, ergonomics, etc. to achieve and maintain that procedures are understood and applied.
  • May perform tasks associated with Health / Safety and Environmental / Compliance.

Education:

  • Bachelors.

 
Job Number: 1910108281
Job Location: San Marcos, TX
Duration: 3 months
Input Date: 10/28/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQc9QAE&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is currently seeking InProcess Inspectors for Hollister, CA
 

Description:  


This position requires the ability to perform limited visual, mechanical and electrical inspection functions in manufacturing areas under minimum supervision.  The individual must be dedicated to the quality function and a drive to enhance the quality of both the product and processes. 
 
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a lower level technical nature with record keeping as a major part of the duties.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a "go/no-go" nature.
  • Interpret basic drawings and instructions.
  • Uses a variety of precision measuring instruments.
  • Other functions that may be assigned.

 
  • High School Diploma,  college-level business courses a plus
  • Knowledge in the use of basic mechanical measuring tools
  • Ability to interpret basic drawings and instructions
  • Basic computer skills, MS Office knowledge
  • Good problem solving skills
  • Good written, verbal, mathematical and analytical skills
  • United States Citizen  

 
Job Number: 1810088645
Job Location: Hollister, CA
Duration: 3 months
Input Date: 10/30/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mci4AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial electrician

Description:
Direct hire opportunities for maintenance technicians to work within a manufacturing company. To be considered candidates must have been at their last job for a minimum of 1 year and no more than 2 jobs in the last 18 months.

12 hour shifts 6am-6pm and 6pm - 6am with A, B, C & D shifts Shift differentials are paid for 2nd shift.

A&B are Sunday - Wednesday

C&D are Wednesday - Saturday



1. Maintain and/or repair Low to High Voltage electrical power distribution systems and electronic components of industrial machinery and equipment on a regular preventative maintenance schedule. In depth ability to trouble shoot 24v Circuits

2. Trouble shoot, replace/repair electrical components of machinery including but not limited to: PLC's, VFD's, Contacts, Relays etc.

3.Ability to read and interpret Electrical schematics, parts diagrams and operating procedures pertaining to industrial electrical equipment.

4. Complete quality documentation of repairs, work orders and preventative maintenance performed on all equipment and machinery.

5. Ability to use a variety of electrical tools safely and accurately including but not limited to: Multimeters, Meggers, Circuit tracers, Fish tape's, Conduit benders, terminal crimpers etc.

Marginal Job Functions: Operating mobile equipment such as forklift trucks, boom lifts and scissor lifts. Welding and fabrication skills are a plus but not required for the maintenance electrician position and can be taught on the job.



Experience/Background: Experience with PLC's, VFD's, Time delay sensors, Photo eyes, Boilers, Chiller pumps, compressed air systems, Driven conveyor belts, High and low voltage service panels. Residential and industrial electrical circuits.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-47270
Job Location: Phoenix, AZ
Rate: 58968.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-11-15 00:00:00.0
Input Date: 11/15/2019
Last Updated: 12/04/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lab Test Technician(Electrical/Electronic Equipment)

Description:
• Plans, conducts and documents complex tests on products, systems, components, materials, and manufacturing processes and technologies.
• Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies.
• Coordinates test requirements determines test methods and capabilities.
• Conducts system test preparations by guiding system integration, fabrication, modification, setup, checkout and teardown.
• Performs test article configuration control.
• Conducts complex tests, analyzes data and documents results; participates in test readiness reviews.
• Identifies and resolves test anomalies.
• Troubleshoots and resolves complex laboratory and test-related problems.
• Coordinates test laboratory activities, maintenance and repairs, and personnel training.
• Assists government agencies, safety and hazardous materials teams in the event of emergencies.
• Coaches and trains others.
• Works under minimal direction.
 
Job Number: Test_MD
Job Location: Germantown, MD
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 12/10/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 09/03/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 4

Description:
MP&P Engineer 4
 
Location: New Orleans, LA
Duration:12 Months
 
Job Description:        
MAF M&P Needs for Green Run
 
Skills and Experience Req'd:
M&P Generalist with some understanding of space propulsion systems. Understanding of spray and pour foam insulation Thermal Protective Systems (TPS) and Cork / Ablator Systems. Understanding of the specifications (STPs / DPIs/ S-201 program specific) regarding these systems/materials and application of such. Familiar with environments necessary for TPS application and the creation / monitoring of these environments for application. Familiarity with damage anomalies associated with transportation, handling and cryogenic tanking and de-tanking of the flight hardware in addition to test firing events. Comfortable with assessing TPS and Cork / Ablator anomalies and provide criteria for Use-as-Is, repair, remove and replace for MRB disposition. or provide direction to use pre-approved program-specific allowances or rework allowables.
 
Familiarity with Contamination Control Specifications and DPIs in support of maintain clean as relating to Visually Clean (VC0, VC1 and VC2) and precision clean surfaces. Understanding of cleanliness requirement related to purge gases and gases exposed to fluid clean systems. Understanding of tests and testing requirements of system or purge gases prior to introduction. Understanding of requirements and specification related to connect and disconnect of Ground Support Equipment (GSE). Familiarity with environments and enclosures required (Controlled Work Area, Controlled Area, Temporary Environmental Control Zones and Draping) when connecting and exposing critical or precision clean surfaces. Ability to address or capability to 'reach back” in a variety of disciplines as exampled by electrical, adhesives and coatings, contamination, fasteners and metallic anomalies.
 
Education / Experience:        
Typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Skill Code: 6A8-Chemical/Contamination

Report to work instructions after obtaining badge: Instructions to be provided



As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-09302
Job Location: New Orleans, LA
Per Diem: Split Per-Diem available
Input Date: 11/12/2019
Last Updated: 11/18/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician

Description:
Direct hire opportunities for maintenance technicians to work within a manufacturing company. To be considered candidates must have been at their last job for a minimum of 1 year and no more than 2 jobs in the last 18 months.

12 hour shifts 6am-6pm and 6pm - 6am with A, B, C & D shifts Shift differentials are paid for 2nd shift.

A&B are Sunday - Wednesday

C&D are Wednesday - Saturday



5 years experience with the following skills :

  • Extrusion

  • Gearbox repair

  • Project Management

  • Building heating/cooling/ventilation systems

  • Mechanical skills not limited to mechanical, electrical, pneumatic, and hydraulic trouble shooting and repair



ESSENTIAL QUALIFICATIONS, KNOWLEDGE & EXPERIENCE


  • High school diploma or GED.

  • Working knowledge of mechanical, electrical, and/or instrumentation maintenance procedures and work practices.

  • Understands and committed to maintaining safe work practices.


Familiar with Water Quality monitoring, Dust Collection systems, Blueprints and Schematics

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-47266
Job Location: Phoenix, AZ
Rate: 41600.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-11-15 00:00:00.0
Input Date: 11/15/2019
Last Updated: 12/06/2019
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:

Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required. *

Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11562
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/27/2019
Last Updated: 12/24/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner(Electrical/Electronics)

Description:
• Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Develops and plans manufacturing concepts and strategies to support business objectives.
• Prepares build analyses and cost estimate reports.
• Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Participates in source selection to ensure manufacturing requirements are met.
• Develops complex tooling requirements based on manufacturing and engineering requirements.
• Manages tooling from initial design to end of use disposition.
• Leads investigation and resolution of complex or systemic manufacturing related issues.
• Leads teams performing producibility assessments of design concepts.
• Supports enterprise level benchmarking to incorporate best practices.
• Leads development of complex work statements and sequencing of events to support delivery commitments.
• Develops scheduling templates for use by others.
• Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.
• Develops and documents new job practices, techniques and standards.
• Works under minimal direction.
 
Job Number: MP_AZ
Job Location: Mesa, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
$48.25/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
* Report to a design lead
* Create detailed part and assembly definition drawings and models FTA's using Catia V5
* Create associated parts list supporting part definition
* Must be fluent with SMARTEAM PDM.
* Support drawing release schedule.
* Revise/maintain layouts as required under the direction of a senior designer using Catia V5
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
* Revise detailed parts in support of customer change requests using Catia V5
* Develop and implement changes that will improve installation of systems routings using Catia V5
* Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
* Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
* Utilize analytical skills to support proposed design changes
* Kinematics analysis using Catia V5
o Preliminary structures evaluation
o Understand impact on performance
o Weight impact
o Tolerance stack-up evaluation
o Prepare material for and attend design reviews

Bachelors degree required
 
Job Number: 11492
Job Location: Fort Worth, TX
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 09/19/2019
Last Updated: 12/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Electrical Engineer

Description:
Mid-Level Electrical Engineer
Job ID # 2019-10232
Contract Opportunity
Location: Pittsfield, MA
Industry: Defense
Minimum Education: Bachelor’s Degree
Minimum Experience: 2 years

What You’ll Do:
• The contract Mid-Level Electrical Engineer will support the design, development and test of digital and/or component designs as well as subsystem-level designs that are required to support our various customers’ missions.
• Be an individual contributor within the electrical engineering design team that develops Hardware Configuration Items and Subsystem Level electrical design.
• Exercise creative thinking and ideation to advance our business performance.
• Deliver innovative, flexible, integrated solutions to meet customer's changing business needs.
• Support and engage in programs, projects and practices behind the culture and strategy, and comply with all policies and procedures.
• Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices.
• Interface with vendors for product development.
• Interface with other GDMS engineering disciplines.
• Provide direction/support to Manufacturing as required.
• Attend formal design reviews as both a Presenter and Reviewer.

What You’ll Need:
• Must have experience specifying, designing and verifying digital and/or analog components, and developing subsystem-level designs.
• Preferred qualifications:
o Able to work in teams
o Able to work multiple programs concurrently (multi-tasking)
o Strong Communications Skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor's Degree in Electrical Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 2 years of relevant experience; or Master's degree.

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10232
Job Location: Pittsfield, MA
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer Mentor Graphics

Description:
*This is a full time, 6 month contract position, located in Orlando*



We are seeking a PCB design engineer who will be responsible for designing/debugging, laying out and fabrication of high density, multi layer (8-30+ layers) digital and analog circuits/boards using Mentor Graphics software.



Candidates will be working daily with controlled impedance, terminators, diff pairs, stripline, dual stripline, DDR3, DDR4 and shielded traces on double-sided boards up to 36 layers and 5 gbps. HDI, fine pitch BGA’s, micro, blind and buried vias.



Required
*PCB Electrical Engineer with 6 years’ experience designing, debugging, and laying out digital/analog circuits.
*Skilled in Mentor Graphics Xpedition and Designer V2.3 as well as Valor.
*Single and Double sided assembly with PCIe, GIGe using micro Blind/Buried and Micro via experience
*Experience with controlled impedance, terminators, diff pairs, stripline, dual stripline, DDR3, DDR4 and shielded traces on double-sided boards (up to 36 layers and 5 gbps), . HDI, and fine pitch BGA’s,
*Familiar with IPC and MIL-STD and specifications
*Able to obtain a security clearance after start; requires applicants to be US Citizens.
*4 year engineering degree



Preferred:
*HyperLynx DRC, DxDatabook and Library Manager experience.
*Experience with Mentor Graphics Board Station, DaLMS and Fablink
 
Job Number: 448
Job Location: Orlando, FL
Rate: $70.00
Per Diem: yes split
Input Date: 11/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

PCT Designer

Description:


PCT (Process Control Technology) Designer

Primary function: PCT design groups provide electrical, instrumentation and controls design support for existing and new plants.
• The job purpose
o Develop technically sound and cost effective PCT designs while minimizing design expenditures.
o Develops and drafts PCT design based on input/direction of a PCT engineer or PCT lead designer


Duties and responsibilities

The primary job duties of the PCT designer are a combination of the following descriptions and deliverables.

o PCT Designers are responsible for the execution of the PCT design and drafting for Projects or Maintenance Work orders (MWO).
   This work involves, but is not limited to, the following duties:
o The development of the PCT construction packages
o Electrical and instrumentation installation support
o Updating design documentation to the “as-build” versions
o PCT Designer duties include, but are not limited to the design and drafting of:
o Cable tray systems
o Grounding
o Lighting
  Power
o Heat trace
o Equipment Room layout
o Instrumentation control diagrams
o Standard installation details
o Maintain Area Classification Drawings
o As-built PCT documentation at completion of construction.
The above duties are executed via a combination of ACAD, Microstation,
 (Smart Plant Instrumentation (SPI) not required but would be a plus).




Requirements:
• Specialized knowledge, NEC, ISA
• Technical background in electrical and instrument drafting and design

Skills and proficiencies:
• PCT drafting/design in chemical or related industry
• MicroStation, (SmartPlant Instrumentation (SPI) not required but would be a plus)
• MicroSoft Office Suite
• Ability to read and interpret P&ID (Piping and Instrument Diagrams)
• Abilty to size cable tray, power cables for motors
• Familiarity with hazardous area installation techniques

Desired
• Chemical Field (in Plant) experience helpful
o Duties often require going out into the plant and assessing work required.
• Be able to interface and communicate with various team members, customers and contractors.
• Detail- oriented, self-motivator


 
Job Number: 1910105724
Job Location: KS City, MO
Duration: 6 months
Input Date: 08/23/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GXO8QAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Electrical Engineers - Wiring Design

Description:
Secret Clearance required to start
Electrical Engineer to apply extensive technical principles, theories, and concepts to design and develop electrical block diagrams, system schematic diagrams and cable assembly drawings for overall aircraft functional systems including the selection of electro-mechanical components such as connectors, relays, switches, circuit breakers, and terminal junctions to meet Mil Spec requirements and proven commercial practices.

Email resume: mmccarthy@pdstech.com
 
Job Number: North-Electrical
Job Location: Melbourne, FL
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal FPGA Design Engineer_CLEARANCE

Description:
Roles and Responsibilities

• Perform FPGA design, simulation, and documentation using product families such as Xilinx Kintex7, Virtex7, Zynq, Ultrascale, RFSoc and Altera Stratix.
• Conduct testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, and FPGA debugging tools.
• Define and develop specifications and test procedures.
• Can review and critique designs created by peers and/or junior engineers.
• Is proficient at recognizing the unique design requirements such as safety and reliability architectures associated with military applications.
• Compiles and analyzes test data to determine design effects on electrical circuits for military applications.
• Define development test plans and methods to ensure a robust design is achieved.
• Strong analytical skills and the ability organize/prioritize job assignments and tasks.


Qualifications and Education Requirements

TOP SKILLS: FPGA Design experience, Subject matter expert in coding VHDL/Verilog, preferably experience with Xilinx FPGAs and respective firmware tools. Proficient in digital verification, validation, and debug. Digital logic design experience.

• Bachelor’s Degree in EE or Computer Engineering and 9 years of relevant experience or a Master’s Degree with 7 years of relevant experience.
• Experience in FPGA design and development using VHDL or Verilog.
• Experience with Simulation tools.
• Experience with setting and managing design constraints to meet critical timing requirements.
• Experience with FPGA design verification using hardware verification and debugging tools.
• Experience in the use of lab equipment such as oscilloscopes and logic analyzers.
• Experience in creating and managing technical documentation such as architecture and interface control documents.
• Experience in Hardware/Software integration.
• Experience in lead engineering role.
• Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact circuit requirements and design constraints

Preferred Skills
• Experience in bus protocols such as I2C, SPI, RS-232, JESD204B.
• VHDL.
• Digital implementations of low pass, bandpass, and high pass filters.
• Digital implementations of comb filter and Hilbert transform filter.
• Experience with Intel Arria 10/Max 10.
• Experience with Modelsim, Xilinx Vivado, Synplicity, MATLAB, Quartus, Simulink.
• FPGA Digital Signal Processing implementation.
• Experience with bus functional models.
• Is familiar with unique test requirements associated with military electronics such as extreme temperature testing.
• Preferably an Understanding of Six Sigma disciplines, design for assembly / design for manufacturing (DFA/DFM).
 
Job Number: KMNG - 9664769
Job Location: Plymouth, MN
Rate: OPEN
Per Diem: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 12/02/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal System Safety Engineer - Clearance

Description:
Key responsibilities include:

Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs • Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
Applying engineering principles to assess design compliance of a complex aerospace system and synthesize rationale and justification for Safety waiver requests and hardware non-compliances
Identifying technical issues, proposing solution options, and following through to resolve the issues with minor supervision
Interfacing with internal and external customers and associates in engineering and program management • Generating and presenting status charts at program and customer meetings.
Requirements:

Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
Minimum 7 years of related experience.
High level understanding of tactical missile subsystems.
Proficient with MS Office suite of products.
Strong interpersonal skills and an ability to build effective working relationships are a must.
Excellent attention to detail.
Excellent oral and written communication skills and technical writing experience.
Ability to communicate findings to varied audiences to gain support or resolve concerns.
Self-starter capable of performing and prioritizing assigned tasks with very little direction.
Familiarity with requirements development and risk management.
 
Job Number: KM - SIGN - 9436479
Job Location: Northridge, CA
Rate: $80-105/hr DOE
Per Diem: No
Duration: 6 months (possible CTH)
Start Date: ASAP
Input Date: 11/25/2019
Last Updated: 12/04/2019
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Printed Wire Board Designer

Description:
We have an outstanding Contract to Hire position for a Printed Wire Board Designer to join a leading American technology located in Cincinnati, OH.

The PWB Designer performs complex and difficult design tasks requiring the operation and application of Computer-Aided Design equipment and associated peripheral equipment. Requires extensive skill and knowledge of equipment capabilities, application techniques and design limitations. Maintains technical coordination with engineering and design staff members. Work assignments are typified by their complexity and non-routine nature where established techniques and procedures may not exist. Provides work leadership to lower level CAD users and reviews work for quality and accuracy.

Major Responsibilities:
Prepare and direct preparation of design studies. Oversee multiple projects and maintain status records on all assigned projects and in full accordance with IPC and AS9100 quality standards and requirements.
Examine engineering drawings and related documents for soundness, efficiency, completeness, clarity and dimensional accuracy; conforms to design/drafting standards, design. Actively participates in the transition of design from concept to production floor.
Perform tolerance analysis as required. Implements approved changes.
Function as checker for all documents prepared by support personnel.
Makes accurate scale layouts of parts, assemblies, or electronic circuits for electronic units of considerable complexity, showing specification tolerances, dimensions and material to be used.
Checks with design engineers or other sources such as parts catalogs to find additional data.
Performs CAD Designs using the following tools: Mechanical/Gage/Tool Designers - Solid Edge ST6 , SOLID WORKS as required.
PWB Designs – Altium, Mentor Pads 2007, DX Designer, PCB to 3D, CAM 350 others as required
Prepares detailed drawings, and complete mechanical or electrical drawings of printed circuit (PC) board components and assemblies from notes, verbal instructions, and rough or detailed sketches for engineering or manufacturing purposes.
All other tasks as assigned by manager.
Basic Hiring Criteria:
Associates degree in Engineering with 5+ years of on the job PWB design experience, or 10+ years of on the job PWB design experience.

Desired Qualifications:
ANSI Y14.5-82M dimensioning and tolerancing.
PWB designers are required to have IPC CID certification or have the ability and desire to obtain one. Equivalent certifications considered.
Working knowledge of IPC standards related to electrical symbology. IPC Class III literate.
Working knowledge of materials and processes specific to the PWB industry.
Experience with Rigid, Flex, and Rigid-Flex design requirements.
ECAD tool experience (Altium and how to interface with MCAD & ECAD DFM tools).
Project Management
Working knowledge of algebra, geometry, and machining technology.
Proficiency in 2D and 3D CAE/CAD/CAM software tools.
Proficiency in Microsoft Office products
Working knowledge of MRP/ERP systems and data management applications.
 
Job Number: 39187
Job Location: Cincinnati, OH
Rate: $36 - 50 DOE
Overtime: Every other Friday off
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/22/2019
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Acceptance Specialist

Description:
Product Acceptance Specialist
Job ID # 2019-10209
Contract Opportunity
Location: Mesa, AZ
Industry: Defense
Minimum Education: High School Diploma / GED
Minimum Experience: years

What You’ll Do:
• Looking for experience in inspection of Aircraft Wire Harness and electrical panel build processes; to include terminations, layup, boot and close with testing to drawing and specifications.
• Verify basic product conformance to design requirements.
• Provide objective evidence of results.
• Perform auditing, surveillance and monitoring.
• Identify and document discrepancies using non-conformance system.
• Segregate and control non-conforming items.
• Review rework dispositions.
• Assist in product reviews with internal customer during product or process verification.

What You’ll Need:
• Must available to work various shifts: 1st, 2nd and/or weekends.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Education/experience typically acquired through basic education (e.g. high school diploma/GED).

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10209
Job Location: Mesa, AZ
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: .
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 08/21/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Project Engineer

Description:
PDS Tech, Inc. is seeking a Project  Engineer, in Windsor Locks, CT.

Summary:
The successful candidate will be working on the support of the qualification and production builds.
Responsible for leading the Engineering Teams to drive delivery of products Candidate will lead diverse project teams in manufacture Coordinating setting team meeting agendas, leading team meetings and driving action item closures.
Team activity scope control, including status and corrective action plans to budget challenges.
Coordination of engineering change activities.
Prerequisites:
Experience with product production build and test Experience with presentations.
Experience troubleshooting (specifically with respect to MRB disposition) .
Planning, adaptability, organizational and negotiation skills for effective team management.
Participate in regular reviews with the customer.
Develop and manage program schedules to drive on-time contract deliveries.
Participate in contract proposals, including BOE and BOM estimates.
Utilize Earned Value methodology to forecast program demands and track project completion.
Process engineering changes to ensure high quality, conforming hardware is being received, built, and delivered to our customers.

Education and Certifications:
BS in Mechanical, Electrical or Chemical Engineering degree w/ 5 years of experience.
PMP Certification desirable.
 
Job Number: 1910103071
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jyeQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Description
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product. Collaborates with engineering and manufacturing functions to ensure quality standards are in place. Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. Audits quality systems for deficiency identification and correction. Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. May be certified in lean and six-sigma quality engineering methodologies.
Skill/Experience/Education
Mandatory
Bachelors or Masters degree preferably in Industrial Engineering, Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related discipline from an accredited college. This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen.
Desired
Electronic subassembly, CCA experience, Cable and Harness experience Understanding of root cause analysis and corrective action Manufacturing techniques Strong written and oral communication skills Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc. Ability to work independently and as a team player
 
Job Location: Ocala, FL
Rate: 50/hr
Per Diem: Split
Input Date: 11/27/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

RF Engineer

Description:
Job Description:
Support troubleshooting and link optimization efforts to reduce the impact of antenna pilot tone on the modem.  This work will involve RF troubleshooting and transmission planning improvements.  Will work closely with the antenna engineering and the satellite capacity team.  Assist with other cost savings efforts.
Responsibilities:
  • Work in lab environment to assemble various RF test scope. 
  • Troubleshoot satellite communication system components.
  • Help evaluate the impact of certain functionalities on the overall system performance.
  • Lab testing skills to evaluate the prototype unit to the design specification.
  • Create the Interface Control Document (ICD) and Training Material.
  • Train various engineering and operation group on system installation and operation of the system.

Knowledge/Skill Set:

  • Knowledge in installation and activation of a satellite communication system
  • Basic understanding of Integrated Antenna System including pointing and peaking
  • Basic understanding in free space link budgets, cascading link budgets, active/passive RF parts
  • Preferred - Knowledge in ARINC Simulation and OpenAMIP interface
  • Preferred - Competency in free space Link Budgets and cascading link budgets
  • Preferred - Ability to define and execute system and unit level tests

Education/Experience:

  • Undergraduate in electrical/computer engineering, computer science, physics or mathematics from an accredited university (Graduate in Electrical or Computer Engineering is preferred)
  • 3+ years of professional experience (+5 preferred)
  • Experience using tools like SNMP, Python, MATLAB, Linux Operating System, Spectrum Analyzer, Scripting

Please email Bryan Bui at bbui@pdstech.com or call at 206-763-2840
 

 
Job Number: 1910108061
Job Location: Lake Forest, CA
Duration: 6 months
Input Date: 10/23/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Bryan Bui
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fPq6QAE&URLSource=cjhunter

RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking an RF Test Program Set (TPS) Design Engineer (Secret Clearance) in Baltimore / Linthicum Heights, MD.
 
Required Skills/Attributes or Domain Knowledge:
  • Mix of hardware RF/Digital and software skills (C/C++)
  • Background and working knowledge in RF theory and concepts
  • Test design and integration background
  • Candidate must be hands on person and have personal experience with test.

 
Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience.  Will accept candidates with more experience (8+ years) to fill at a higher level
 

 
Job Number: 1910107903
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4yQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
Required Skills/Attributes or Domain Knowledge:
•Mix of hardware RF/Digital and software skills (C/C++)
•Background and working knowledge in RF theory and concepts
•Test design and integration background
•Candidate must be hands on person and have personal experience with test.

Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience. Will accept candidates with more experience (8+ years) to fill at a higher level
 
Job Number: 1910107903
Job Location: Linthicum, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 03/02/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer II (Interim Clearance)

Description:
MUST HAVE AT LEAST AN INTERIM CLEARANCE TO START

The position will require frequent interaction with hardware subcontractors to oversee design, test and manufacturing activities. Candidates will be expected to provide solutions to a variety of technical problems of moderate scope and complexity, working under minimal supervision. Successful candidates should expect to be immersed in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive.

Responsibilities include:
• Leading the integration and testing of Complex RF or Electrical subsystems
• Performing subsystem analyses including the characterization and modeling of electrical subsystems
• Troubleshooting hardware and process issues down to CCA and/or component levels
• Resolution of issues on production lines and in testing (including suppliers)
• Failure analysis / root cause determination and corrective action implementation

The ideal candidate will have expert level knowledge in one or more of the following areas:
• RF Seeker design, manufacture and test including familiarity of Seeker components including antennas, transmitters, receivers and transceivers
• Digital and/or Analog CCA design, integration and test

Required Skills:
• Ability to trade cost, performance, and packaging approaches for electrical subsystems
• Knowledgeable in the hardware lifecycle from requirements definition and architecture development through integration and verification, and production support
• Experience with any of the following tools:
o High Frequency Structure Simulator (HFSS),
o Advanced Design System (ADS),
o SystemVue,
o SystemVision,
o PSpice,
o MATLAB,
o Mentor Graphics DxDesigner,
o System Vision,
o MathCad,
o IDL,
o Computer Simulation Technologies (CST),
o Microwave Design Studio
• Experience supporting Production and/or Test of electrical sub-systems in a manufacturing environment
• Expert knowledge of RF, analog, digital, and/or mixed signal circuit design and analysis
• Experience in Root-Cause Corrective Action investigations
• Knowledge and experience proposing and implementing Engineering Change Notices
• Experience in resolving production issues with suppliers and sub-tier suppliers
• Technical writing and formal presentation experience
• Experience in applying SPC methods in achieving production yield improvements

Desired Skills:
• Experience performing electrical engineering design of CCA, RF Seeker/Sensor, or electronic subsystem including; circuit design, CCA assembly, electrical test and production support
• Experience performing integration and testing of RF component, RF Seeker/Sensor, and/or RF electrical subsystem
• Knowledge of printed circuit board fabrication and circuit card assembly processes and related industry specifications
• Leadership of large technical teams, including technical oversight and direction, cost estimation, tracking & reporting, coordination and preparation of detailed technical team reports
• Familiarity with missile communication transceivers and data links, inertial measurement units (IMU) and Global Positioning System (GPS) receiver subsystems
• Experience with subsystems integration and test
• Experience with test equipment, test automation scripting, test conduction, sensor control
• Experience with post test flight analysis
• Test problem investigation experience

Education:
• B.S./B.A. in Engineering, Science, or Mathematics
• Major(s): Electrical Engineering or Electrical Engineering Technology with over ten (10) years of experience
• Master’s degree in Engineering preferred
 
Job Number: 1910109275
Job Location: Tucson, AZ
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/21/2019
Last Updated: 12/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Senior Space System Engineer

Description:
Chipton-Ross is seeking a Senior Space System Engineer for an opening in Huntsville, AL.

RESPONSIBILITIES:
" Provide technical leadership throughout the design, development, integration, and test of the satellite bus, payload, and ground station.
" Provide technical guidance and oversight to a multi-disciplinary team that covers all satellite subsystems and components including satellite mechanical structure; Tracking, Telemetry, & Control (TT&C); Attitude Determination and Control System (ADACS); flight computer; Electrical Power System (EPS) including solar arrays and batteries; deployment mechanisms; ground stations; RF and laser communications, etc.
" Provide technical leadership for the preparation and conduct of program reviews such as System Requirements Review, Preliminary Design Review, Critical Design Review, Mission Readiness Review, etc. including development of entrance and exit criteria, objective evidence artifacts, etc.
" Provide expertise to support the risk management process including the identification of technical, schedule, and cost risks as well as the development and management of risk mitigation plans.
" Support the program manager by providing technical oversight to subcontractors.
" Troubleshooting problems and develop resolutions to issues.
" Support test engineers in the development and review of test plans and procedures.
" Act as a technical interface for the satellite system to government customers and Client leadership/management.
" Facilitate rapid resolution of technical delays that impact tasks including real-time, thorough communication with task leads, program management and other leadership as required.
" Collaborate daily with Client and customer engineering and program management teams.
" Support the program manager in the development of the integrated master schedule as well as support the development of statements-of-work (SOWs) and technical requirements documents for subcontractors.
" Support development of purchase requests/purchase orders and provide coordination between engineering and the buyers and subcontract administrators.
" Provided documentation and makes technical presentations as required.
" Support development, review, and editing of technical documents and proposals as required.
" Perform other duties as required.

REQUIRED EXPERIENCE:
Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

EDUCATION:
Bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

WORK HOURS:
Full-Time

 
Job Number: 181923
Job Location: Huntsville, AL
Rate: $DOE
Duration: Direct
Input Date: 09/26/2019
Last Updated: 03/31/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Design Engineer - Large Aircraft

Description:
Senior Aircraft Systems Design Engineer with a minimum of 8 years experience designing electrical, mechanical, fuel and hydraulic systems using CATIA V5. Propulsion systems experience a plus.
 
Job Number: SDE-001
Job Location: Seattle, WA
Rate: $70/hr
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/20/2019
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

Software / Test Engineer

Description:

Job Description

Software Engineer to work in a team environment to redesign/re-write, test, and document software for a new generation of automated test equipment used to perform system functional testing of Boeing 737 airplanes.  Software will be developed sequentially for three different ATE systems, with commonality to the extent possible.  Software will generally be written in C# and running on Windows OS with complexity on the order of 50,000 lines of code.  Existing software is a mix of C#, National Instruments LabWindows C for Virtual Instrumentation (CVI), and some Visual Basic. 
 



Basic Qualifications (Required Skills and Experience)

• Bachelor's Degree and 5 or more years' experience, Master's degree with 3 or more years' experience or
  PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of
  study, in engineering, computer science, mathematics, physics or chemistry
• Strong background and expertise with C# development and Visual Studio
• Experience developing object-oriented applications using .NET framework design patterns
• Experience participating in Agile software development teams
• Experience using Git and GitLab or GitHub
• Software development experience including communication with hardware APIs
• Experience in data acquisition and control.
• Ability to read electrical schematic diagrams to understand airplane interface requirements

 


Desired Experience, Skills, and Qualifications

• Experience in National Instruments LabWindows CVI and/or Visual Basic 6
• Experience in PXI, PCI, VXI, IEEE-488, RS-485, CAN bus instrumentation
• Familiarity with Microsoft Access and SQL Server
• Experience in avionics data busses such as ARINC 429
• Proficiency in Microsoft products (Windows, Office, Project, Visual Studio, etc.)
• Experience configuring Windows 10 user profiles for security considerations
• Experience configuring computer networking for DHCP, private network, and proxy servers
• Computer aided design (CAD) with AutoCAD, Autodesk Inventor or Catia
 
Job Number: 1910108209
Job Location: Renton, WA
Duration: 12 months
Input Date: 10/24/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQSJQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Supplier Quality Engineer

Description:
We have an outstanding position for a Sr. Supplier Quality Engineer to join a leading Company located in San Diego, CA area.

**Position requires U.S. Citizenship.**

Job Responsibilities:
We are looking for an experienced Supplier Quality Principal Engineer with experience with the manufacturing, inspection and approval of Printed Wired Boards of varied complexity.
This professional will implement tools and processes to ensure suppliers are prepared and have robust plans to deliver first time quality to Systems Program Customers.
The role requires both the experience and the certification on IPC-A-600 and full familiarization with mil-std 883, mil-prf-38534 and other standards.
The selected candidate will also investigate, evaluate, resolve and prevent Quality problems by conducting audits, analyzing defect trends, leading continuous improvement projects and implementing preventive tools.
The Supplier Quality Principal Engineer will conduct capability assessments that verify supplier qualifications, will travel to assigned suppliers, and lead multiple projects to completion.
Job Qualifications:
Bachelor’s degree in Engineering, Computer Science, Computer Engineering or related technology, and at least ten years of experience.
Work Experience in a Supplier Quality Engineering role Experience in Aerospace or a Defense Electronics Prime Contract environment.
Working knowledge of AS9100 Quality System and AS9102B First Article Requirements and Source Inspections Experience with electrical/mechanical inspections, product test, equipment and instrumentation.
Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system.
Effective Problem Solver using Structured Problem Solving methods and systems Effective communicator, able to express ideas clearly, directly and objectively.
Certification on IPC-A-600 Familiarization with mil-std 883, mil-prf-38534 and other related standard Effective, clear communicator and practical problem solver.
Preferred:
Proficient experience Product Production Line Validation, test, equipment, instrumentation and qualification of Mechanical and Fabricated products.
Working knowledge of PCBA/CCA inspection/test, equipment and instrumentation (IPC-A-610 certification desired).
Experience with product test, equipment and instrumentation, knowledge of thermal processes, welding and brazing, finishes and coatings, nondestructive testing, fabrication, composites and other common processes common in the Aerospace and Defense Industries.
Familiarity with APQP and PPAP and process tools such as PFMEA and Control Plan Practical experience with Lean Manufacturing and Lean Six Sigma Green / Black Belt certification from a recognized organization.
Working knowledge of the principles and the purpose of a Quality Management System.
 
Job Number: 39060
Job Location: San Diego, CA
Rate: $34 - 38 DOE
Duration: 12 month initial
Start Date: ASAP
Input Date: 11/22/2019
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Sr. Electrical/Avionics Engineer

Description:
PDS Tech Inc. is seeking a Sr. Electrical/Avionics Engineer, in Grand Prairie, TX.

Send resume to ccallwood@pdstech.com or call Clyde at (813) 463-2513 for more information

Design, modify and integrate custom avionics and electrical packages for new aircraft and/or retrofit.  Create engineering drawings and reports, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and support STC projects. 



Primary Responsibilities:



Detail design: 50%



  • Design wiring diagrams, harness drawings and system architecture
  • Review and facilitate engineering package release
  • Can lead groups of engineers to complete projects along with representing the group at management meetings
  • Works independently with minimal supervision from Engineering Management
  • Work is reviewed upon completion for adequacy in meeting company objectives


Project Coordination 20%



  • Select avionics equipment, wiring and supporting electrical infrastructure
  • Produce avionics specification documentation for individual projects


Engineering Support 20%



  • Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed
  • Act as liaison to manufacturing and production efforts as needed
  • Support installation, functional and operational tests, and ground and flight tests


Substantiation 10%



  • Creates electrical load analysis and environmental qualification reports in support of initial layout and design concept
  • Performs Functional Hazard Analysis and Systems Safety Analysis as required.


Additional Responsibilities:



  • Other duties as assigned

Qualified Experience / Skills / Training: 




Send resume to ccallwood@pdstech.com or call Clyde at (813) 463-2513 for more information

Education:



         Required: Bachelor's degree in Electrical/Aeronautical Engineering from an accredited college/university or equivalent applicable work experience.



         Preferred: Master's Degree from an accredited college/university in engineering



 



Experience:



  •          Minimum of six (6) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment. 


Knowledge, Skills, Demonstrated Capabilities:



         Knowledge of aviation/aerospace electrical/avionics design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations.  Direct experience with rotorcraft is preferred. 



Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):



  •          Must be able to communicate effectively in the English language (verbal and written).
  • Conversational French and/or German is a plus 


Technical Systems Proficiency:



  • Must be proficient with Microsoft Office Suite programs.
  • Minimum 8000hrs AutoCad , familiarity with CATIA V5 and SAP programs preferred


 




Travel Required:



  • 5% Domestic and International


Citizenship:



  • US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)


Clearance:



  • None 


Decision Making, Complexity:



Provides technical solutions to a wide range of difficult problems.  Solutions are imaginative, thorough, practicable and consistent with company objective. 



A typical project may involve researching compatibilities among equipment, such as a video router for a customer chosen Camera system, monitors, a DVR, a Mapping System and a wireless video downlink. 



The engineer will be involved with the on-aircraft integration and troubleshooting, as well as addressing installation constraints such as: limited space, connector compatibility and signal shielding requirements. Most importantly, the ability to adapt to shifting technical challenges, being able to communicate with technicians, managers, and the various stakeholders in a project, is key to the success of the team. 



Must be able to assist less experienced engineers through training, design assistance, application of the proper methods, and technical assistance in developing the appropriate electrical/avionics substantiations, and to help develop the decision making ability.  



Job Dimensions, Contributions to Success: 



Position will be responsible for producing high quality drawings that accurately describe how to integrate various systems and avionics.  Success will be measured on first pass yield, innovation, success of integration integrity and compliance to customer requirements/expectations.  



Nature of Contacts:



Involved Communication on a regular Basis with internal parties only 



Physical Requirements: 



  • Onsite: 95%
  • Vision: Daily able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings.
  • Hearing: Daily able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms
  • Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Daily able to operate most office and personal electronic equipment and infrequently able to use/operate some tools including production tools such as hydraulic lifts.
  • Carrying: Daily able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
  • Lifting: Daily able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
  • Pushing / Pulling: As necessary able to push and pull small office furniture and some equipment and tools.
  • Sitting: Daily able to sit for long periods of time in meetings, working on computer.
  • Squatting / Kneeling: Frequently able to squat or kneel to retrieve or replace items stored on low shelving.
  • Standing: Frequently able to stand for discussions in offices or on production floor.
  • Travel: Infrequently able to travel independently and at short notice.
  • Walking (include routine walking such as to a shared printer to retrieve documents): Daily able to walk through office and production areas including uneven surfaces.
  • Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site

 
Job Number: 1910109077
Job Location: Grand Prairie, TX
Duration: 24 months
Input Date: 11/18/2019
Last Updated: 03/31/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVH9QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Subsystem Engineer

Description:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification



We're looking for someone who has:
• Bachelor’s Degree in a relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent relevant experience in developing electrical systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Proven problem-solving skills across multi-disciplinary skill sets
• Experience with CATIA V5 and Teamcenter PLM desired



The Structures Company is an AA/EOE.
 
Job Number: 331
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 09/26/2019
Last Updated: 02/04/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Integration Engineer

Description:
LOCATION Orlando, FL
DESCRIPTION General Summary
The Sr. Integration Engineer serves as the lead design and test engineer in the development of custom automatic electronic test systems (hardware, software, and interfaces) required for testing assemblies and sub-assemblies for overall acceptance, functionality, and performance. Develops test methodologies and procedures to ensure systems integrity and in accordance to specifications, requirements, and engineering documentation for the replication and traceability of system designs. Provide direct input during design reviews and technical audits. Provide direct support for delivery and installation of test systems at customer sites.
Principal Duties and Responsibilities
1. Applies advanced concepts, theories and engineering principles in the design, development, integration, and acceptance testing of automated electronic test systems.
2. Determines design requirements and develops software for electronics test systems including test program software, self-test software, and system level instrument drivers.
3. Partners with customer technical staff in defining test requirement and test strategy for the development of test software to perform functional and diagnostic tests on customer’s electronic devices.
4. Oversees the development of the electromechanical interface between the test system and the customer’s electronic devices.
5. Provides direct input to the design of electrical/electronic circuits and wiring for integrated test systems.
6. Participates directly in the assembly and integration of electrical, electronic, and mechanical systems.
7. Develops engineering documentation including assembly drawings, schematics, operating procedures, calibration procedures, and other related technical documents.
8. Provides assessments/recommendations in product/system design reviews for developed test systems.
Job Specifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.







Qualifications/ Experience
1. Multi-discipline experience in military and commercial electronic systems ranging from test equipment and instrumentation, flight electronics, computers, jet engines, and other special purpose electronic systems, including RF subsystems.
2. Extensive experience with electronic circuit design, circuit card layout, test systems development, and test systems integration.
3. Experience with GPIB, VME/VXI, and PXI/PXIe test platforms is a plus.
4. Thorough knowledge of the process in taking a product design from concept to production with demonstrated success in test solutions regarding analog and digital electronics development, integration, and troubleshooting.
5. Analytical reasoning and problem solving with knowledge in performing root cause analysis and recommending corrective action to resolve test failures.
6. Software experience with automatic test system development environments such as LabVIEW, LabWindows/C/C++/C# VisualBasic, or C#.
7. Experience in designing to meet Environmental requirements such as shock, vibration, thermal, humidity, altitude, salt/fog, etc.
8. Experience designing to meet Electromagnetic Interference (EMI) requirements.
9. Good knowledge of metals and alloys and their properties and sheet metal design
10. 7+ years of hands on engineering design experience
11. Must be a US person.

Education:
1. Bachelor’s in Electrical Engineering (BSEE), Computer Engineering or Computer Science (BSCE/BSCS) from four-year college is required

Computer Skills:
1. LabVIEW, Test Stand, LabWindows CVI, C/C++/VisualBasic, or C#.
2. Word processing, Spreadsheets, Internet software, E-mail, Database software
3. Experience with Altium Designer for schematic capture and layout
 
Job Number: 1002
Job Location: Oralndo, FL
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 6-12monts
Start Date: Q1
Input Date: 11/21/2019
Firm Name: EXPLEO GROUP
Attention: Faith Wilson
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com