Job Search Results

806 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/03/28 Saturday 01:12AM Pacific Time by ContractJobHunter. )

Listings 1 - 806

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2590 - PROJECT ENGINEER - CV in 'word doc - only'

Description:
Have minimum of 10 years%u2019 experience in project management in the aerospace, transportation or other field where you have taken on increasing level of responsibilities and demonstrate the ability to handle more complex projects.

Training or Bachelor's degree in Project Management, Engineering, or relevant experience in the aeronautical / transportation fields.

Have an extensive management and supervisory experience that will differentiate you from other candidates and make you a prime candidate for this position.

Have a Project Management Professional (PMP) Certification from the Project Management Institute (PMI).
Exceptional relational and editorial skills in English and French.

Are familiar with Microsoft Office software such as PowerPoint, Excel and MS Project.

FUNCTION

Have experience in leading and driving engineering and fabrication activities for internal resources as well as third party Engineering service suppliers.

Leadership, ability to have a strategic perspective with a global vision.

Strong organizational, interpersonal, time management and communication skills.

Be autonomous and a critical thinker in order to take the right decisions.

Be confident and have experience in multidisciplinary team coordination.

Ability to assign tasks effectively and then follow up with thoroughness and rigor.

Be a team motivator, collaborator and promote the valorization and respect of others.

Have resilience, openness to change and manage stress positively.

Have good cost and contract management skills.
 
Job Number: 2590
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 02/19/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant - Clearance VA

Description:
166910
Job Title: Administrative Assistant

Work Site Address: Manassas, VA 20110
Job Number: 2743-1
Max Pay Rate: $42.00/hr
Start Date: 11/25/2019
End Date: 2/19/2021
Position Type: Contract

Job Summary:
Performs a variety of administrative duties for security and asset management personnel.

Verifies clearances and briefings for visitors. Assign daily lab entry badges to cleared personnel, as well as give direction on the usage and policies regarding them. Sign packages and notify personnel upon receipt. Label unclassified items i.e. laptops with appropriate property stickers. Ensure the lobby safe is locked and secured properly upon assumption of duties. Directing and informing new hires and foreign visitors on the security policies involved while on site. Perform lab walk throughs each shift to ensure no classified assets are left unsecure, improperly or not marked to lab standards. Distribute and file security briefing forms for lab workers, i.e., physical access, IS account, or administrative work acknowledgements to lab security. Perform daily lab asset scanning using a provided scanning schedule.

Qualifications and Education Requirements
BS Degree is NOT required
Proficient use of Microsoft Office to include Word and Excel is desired.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel No 1 < 1 Year Software Skills MS Word No 1 < 1 Year Qty 1 position This position is 5/40 2nd Shift
 
Job Number: LMRMS-2743-1S
Job Location: Manassas, VA
Rate: 42/hr max
Duration: 15 months
Input Date: 11/14/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant - no clearance VA

Description:
167308 Job Title: Administrative Assistant

Work Site Address: Manassas, VA 20110
Job Number: 2971-1
Max Pay Rate: $30.00/hr
Start Date: 1/20/2020
End Date: 4/20/2021
Position Type: Contract

Job Summary:
Provide executive administrative assistant support to the Vice President of Strategy and Business Development .
Job requires an individual who has excellent interpersonal and communication skills, highly dependable, ability to work independently and effectively with a high level of flexibility in prioritizing tasks and schedule as well as start/stop work times.
The position requires working seamlessly across multiple geographic locations and work confidently and closely with other executive management.

Roles and Responsibilities
Administrative duties include tracking action items and follow-up on those actions, arranging meetings that may include catering and involve external customer attendees.
Position has a high volume of calendar management activity which includes ability to re-work and de-conflict calendar schedule and identify knowledgeable individuals to attend meetings on behalf of the VP.
Arranging travel plans (domestic and international as well as ground transportation) that may require multiple changes to meet changing business schedule; assemble and provide all necessary travel documentation and business material needed prior to travel.
Responsible for processing expense reports in Concur.

Qualifications and Education Requirements
Candidate must have 5 years minimum administrative assistant experience supporting high level management.
Candidate must have excellent communication and interpersonal skills, works well with peers, dependable and utmost discretion and confidentiality.
Candidate must be proficient in Advanced Excel and Microsoft Office (Word, PowerPoint, Outlook).
Candidate must have excellent multi-tasking ability and ability to prioritize tasks.
This position does NOT require a degree. Does require a HS diploma.

Skills: Category Name Required Importance Experience
Soft Skills Relationship Building Yes 1 4 - 6 Years
Soft Skills Report Writing Yes 1 4 - 6 Years
Soft Skills Strong Leadership Skills Yes 1 4 - 6 Years
Soft Skills Strong Listening Skills Yes 1 4 - 6 Years
Soft Skills Team Player Yes 1 4 - 6 Years
Soft Skills Troubleshooting Yes 1 4 - 6 Years
Soft Skills Written/Verbal Ability Yes 1 4 - 6 Years
Software Skills Microsoft Suite Yes 1 4 - 6 Years
Software Skills MS Excel Advanced Yes 1 4 - 6 Years
Software Skills MS Word Advanced Yes 1 4 - 6 Years

Qty 1 position
This position has a possibility of converting to a full time position.
 
Job Number: LMRMS-2971-1
Job Location: Manassas, VA
Rate: 30/hr max
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 03/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Administrative Assistant - no clearance CO

Description:
167299 Job Title: Administrative Assistant

Work Site Address: Colorado Springs, CO 80909
Job Number: 2966-1
Max Pay Rate: $25.00/hr
Start Date: 2/10/2020
End Date: 2/7/2021
Position Type: Contract


Job Summary:
Performs a variety of secretarial and administrative duties for assigned supervisor/manager or senior staff member.

Performs normal office functions such as setting up and maintaining alphabetical, numerical and/or subject files; interviewing callers and making proper referrals; arranging meetings and conferences; and receiving, referring, or answering mail. May take and transcribe dictation; uses personal computers and standard desktop software to compose reports, correspondence, and memorandums; reviews drafts and finished documents for appropriate grammatical usage; answers questions relating to office operations and established policies and procedures. May provide guidance and direction, as needed, to lower-level secretaries and other clerical employees. Candidate should be well versed with all Microsoft Office Suite tools with strong emphasis on Outlook, PowerPoint, Word and Excel. SharePoint experience desired.

Following is a list of tasking that candidates must possess past experience:
Calendar Management/Assistance (help manage calendar)
Meeting/Conf Room Scheduling
Travel Arrangements
Expense Reporting
Capturing Meeting Minutes
Data Collection and/or Distribution/Inputs
Event Coordination (arranging small and large project meetings, off-sites, catering, training, etc.)
SharePoint Input/Maintenance
Office Supply Ordering (staples via P2P)

Qualifications and Education Requirements
Candidate should also possess excellent interpersonal skills, both oral and written, and the ability to work well with all levels of internal and external management and staff.
Demonstrated professional presence as the initial interface for management, visitors, vendors and employees creating a professional environment.
Experienced in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint) with advanced level of competency.
Prior administrative supporting program teams would prove beneficial.
Possess working knowledge of SharePoint and Internet research skills.
Ability to coordinate travel arrangements and reconciliation of expense reports.
The ability to handle confidential and sensitive information with the utmost discretion.
Demonstrate the skill to work independently and execute projects with minimal supervision.
Must be able to multi-task and complete assignments accurately and on time.

Skills: Category Name Required Importance Experience
Software Skills MS Excel Intermediate Yes 6 2 - 4 Years
Software Skills MS Outlook Yes 9 6+ Years
Software Skills MS Powerpoint Intermediate Yes 9 6+ Years
Software Skills MS Word Intermediate Yes 9 6+ Years
Software Skills Web Skills Yes 6 2 - 4 Years
Software Skills SAP No 1 1 - 2 Years

Qty 1 position
 
Job Number: LMRMS-2966-1
Job Location: Colorado Springs, CO
Rate: 25/hr max
Duration: 12 months
Input Date: 01/08/2020
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Administrative Assistant - no clearance NY

Description:
167232 Job Title: Administrative Assistant

Work Site Address: Owego, NY 13827
Job Number: 2934-1
Max Pay Rate: $19.60/hr
Start Date: 1/6/2020
End Date: 3/6/2021
Position Type: Contract

Job Summary:
Performs a variety of secretarial and administrative duties for assigned supervisor/manager or senior staff member.

Performs normal office functions such as setting up and maintaining alphabetical, numerical and/or subject files; interviewing callers and making proper referrals; arranging meetings and conferences; and receiving, referring, or answering mail. May take and transcribe dictation; uses personal computers and standard desktop software to compose reports, correspondence, and memorandums; reviews drafts and finished documents for appropriate grammatical usage; answers questions relating to office operations and established policies and procedures. May provide guidance and direction, as needed, to lower-level secretaries and other clerical employees.

Skills:
Administrative Assistant experience.
Strong organizational and follow through skills, communication skills, multi-tasking skills, strong working knowledge of MS Office Products.
Ability to manage multiple calendars.
Experience interfacing with all levels of management and external customers.
Independent, self-starter who is able to operate a busy office and interface closely with other business units. Strong technical skills and teamwork skills.

Category Name Required Importance Experience
Soft Skills Communication Skills No 1 1 - 2 Years
Soft Skills Organizational Analysis No 1 1 - 2 Years
Software Skills MS Office - Advanced Level Yes 1 2 - 4 Years
Technical Skills Administrative Experience Yes 1 1 - 2 Years

Qty 1 position
 
Job Number: LMRMS-2934-1
Job Location: Owego, NY
Rate: 19.60/hr max
Duration: 15 months
Input Date: 12/30/2019
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant 3 CA

Description:
Administrative Assistant 3 (Job Number: 19039123)
Number of Openings: 1
Location(s): United States-California-San Diego

Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Feb 26, 2021

Pay rate: $25.00 - $30.00
Location: San Diego
Duration of assignment: Up to 1 year
Schedule: 9/80
Clearance: Ability to obtain and maintain
Start date: ASAP

Description

The Software Organization at the San Diego Autonomous Design Center of Excellence is seeking an Administrative Assistant to join its growing team. The successful candidate would be responsible for providing administrative support to two Department Managers. The successful candidate would be exceedingly well organized, flexible and have excellent attention to detail. They must have the ability to interact with staff (at all levels) in a fast-paced environment, sometimes under pressure, remaining flexible, proactive, resourceful and efficient, with a high level of professionalism.

Responsibilities
Schedule meetings; coordinates any logistical support for internal/external meetings
Take dictation or record the minutes of meetings
Assist with travel arrangements, making hotel reservations, flight reservations, etc.
Prepare expense reports and slide presentations
Use various Windows software packages to produce high quality reports, presentations or other documents
Organize meeting rooms for large groups on an ad hoc basis
Order catering for office-wide or department meals; includes room set up
Act as primary contact for all questions, issues, and concerns related to the department
Order and stock office supplies
Organize Department functions
Assist other administrative assistants with other tasks as assigned
Other projects as requested

Qualifications

Basic Qualifications:
High school graduate with a minimum of six (6) years administrative experience directly related to the responsibilities of this position.
Demonstrated proficiency with MS Office Suite, specifically Word, Excel, PowerPoint, and Outlook (ability to create and manipulate deliverables utilizing the software)
Experience with Concur travel and expense reporting system
Ability to coordinate all logistical support for internal/external meetings
Ability to collaborate in a team environment
Ability to prioritize and meet expected deadlines
Excellent time management skills
Excellent organizational skills

Preferred Qualifications:
Bachelor’s degree
Experience with collaboration tools such as Microsoft SharePoint and/or Atlassian Confluence
Demonstrated ability to work with minimal supervision, prioritizing multiple tasks with competing deadlines, and managing schedule conflicts
Self-motivated with strong desire to go above and beyond
 
Job Number: JK-1832ATO
Job Location: San Diego, CA
Rate: 25-30/hr DOE
Duration: 1 year
Input Date: 03/16/2020
Last Updated: 03/23/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Software Configuration Management Specialist

Description:
An Advanced Software Configuration Management Specialist job in Bloomington, MN is currently available through Belcan. In this role, you will be responsible for leading all CM activity for a major project of high importance to the enterprise. You will also advise senior level customers regarding CM strategies, tools, or processes at an enterprise level. To be considered for this role, you will have a Bachelors degree in Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Software Configuration Management Specialist Job duties:

• Develop and implement the configuration management systems, which supports the program's software development life cycle (SDLC).
• Define and utilize software configuration management tools to support configuration identification, control, reporting, and delivery of both internally developed and externally acquired software products.
• Perform configuration management and release engineering tasks to ensure new product operating parameters are documented, comply with standards and are logistically sustainable.
• Design, develop, automate and maintain productivity tools - Develop the program's build, release and deployment processes plans which support the release life-cycles for different stages of the SW development activities.
• Define and implement build requirements and procedures that are used to support software product development and use.

Qualifications:

• Proficient in Software Configuration Management Applications.
• Considerable understanding and wide application of technical principles, theories and concepts in the field.
• General knowledge of other related disciplines.
• Considerable understanding and wide application of technical principles, theories and concepts in the field.

If you are interested in this Advanced Software Configuration Management Specialist job in Bloomington, MN, please apply via the “apply now” link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services—from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 295086
Job Location: Bloomington, MN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 01/29/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Advanced Software Engineer

Description:
An Advanced Software Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for developing software in accordance with the system requirements. You will also analyze system, functional and performance requirements and how they impact new or existing code. To be considered for this role, you will have a Bachelor's degree in Software Engineering or a related discipline, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

Advanced Software Engineer Job duties:

* Analyzing system, functional and performance requirements and how they impact new or existing code.
* Conducting peer reviews of software.
* Performing software unit test and supporting integration.
* Shape future products by contributing to the framework (architecture) used across multiple products or systems.

Qualifications:

* Knowledge of using development kits and software modeling tools.
* Proficiency in writing software and understanding of software engineering concepts, principles, and theories.
* Knowledgeable in Python or other scripting language.
* Experience with MATLAB and C or C++ programming.
* Experience with RTI DDS; Socket UDP experience; Linux -- RedHat/Centos; XML/XSD; JSON.

If you are interested in this Advanced Software Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298349
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/10/2020
Last Updated: 03/27/2020
Firm Name: BELCAN TECHSERVICES
Attention: AngelaLoza
City, State: Phoenix
Email: aloza@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=298349&job_number=298349

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.
2. Will be responsible for providing dispositions to non-conforming material documents.
3. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. 4. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
5. CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.
6. Must be a US Citizen.
7. This position is located at a facility that requires special access.
8. This position requires a Final Secret Clearance to start.
9. Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Desired skills
1. Good technical, communication, team, and presentation skills.
2. Previous Material Review Board (MRB) Authority.
3. Major in CE, ME, or AE preferred.
4. Desired skills CATIA 3D Modeling.
5. GD&T understanding.
6. Composite repair.
7. Final finish/spec tech familiarity.
8. Interchangeability requirements knowledge.
9. QADs/ DIMS/ related software experience.
10. Some weekend, odd shift and holiday work may be required.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11935
Job Location: Edwards AFB, CA
Rate: $80.00 - $91.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 12/09/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aeronautical Engineer / MRB Catia - Clearance CA

Description:
167092 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2653-1
Max Pay Rate: $91.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will perform Material Review Board (MRB) Engineering, primarily for structural related details, assemblies and installations on the F-22.

Will be responsible for providing dispositions to non-conforming material documents. Experience with aircraft interchangeability / replaceability requirements, tool usage in an aircraft production environment, F-22 blueprint and specification familiarity, and basic aircraft systems knowledge is strongly preferred. Will be required to coordinate across a large number of functional areas, including Manufacturing, Quality Assurance, Structures and Systems groups, Safety, Material and Processes and Special Technology.
Second shift coverage, weekend work, odd shifts and holiday work may be required to support the test schedule.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

CATIA proficiency is preferred. Previous aircraft MRB authority is highly desired.

Desired skills
• Good technical, communication, team, and presentation skills.
• Previous Material Review Board (MRB) Authority.
• Major in CE, ME, or AE preferred.
• Desired skills CATIA 3D Modeling.
• GD&T understanding.
• Composite repair.
• Final finish/spec tech familiarity.
• Interchangeability requirements knowledge.
• QADs/ DIMS/ related software experience.
• Some weekend, odd shift and holiday work may be required.

Qty 1 position
 
Job Number: JE-2653-1S
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 02/24/2020
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/30/2019
Last Updated: 03/20/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analyst (Level 2)

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.

Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include: Static structural analysis and Margin of Safety determination, fatigue and fracture mechanics analysis of critical interfaces, determination of airframe component replacement and / or retirement times, specification and design of airframe related static and fatigue tests, field support and formal engineering documentation.

Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience Required: Minimum of 6-8 years experience in the functions described above. Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes. Excellent oral and written communication skills are required.

Software Experience: NASTRAN/PATRAN or equivalent FEM, Catia, MS Office applications.

Secret Clearance preferred but not required.

Must be US Citizen.
Please send resumes to Becky at bnorman@butler.com. Phone number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58510
Job Location: Stratford, CT
Per Diem: possible
Overtime: possible
Duration: 3+ months
Start Date: Jan 2020
Input Date: 01/07/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 02/11/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Business Analyst

Description:
Under general supervision, prepares business specifications from which technical specifications are formulated. Conduct preliminary investigation for project requests. Reviews requirements, specifications, test, support and training plans to ensure they are in line with business objectives. The Business Analyst will work with internal teams and our clients to gather information, work with Application Developers, SQA, Data Processing, and Client Services towards fulfilling the clients’ requests. Conducts analysis of business goals, objectives, and needs of the business environment. Makes recommendations to improve business processes. Assist in root cause analysis in order to recommend product enhancements or other appropriate actions to improve productivity for the business units. Utilize systems and data to resolve business issues in the most e effective manner. May help less experienced personnel. Has an overall understanding of the work environment and process.

Basic Qualifications for consideration:
1. Under general supervision, analyze, determine and document business requirements/client Statement of Work documents (SOW) and provide detailed specifications to programming.
2. Provide consultation to the client before, during and after implementation, including the development of new procedures the changes may necessitate.
3. Lead client calls during the implementation process.
4. Participate in testing, during and after application changes have been implemented.
5. Communicate progress and any potential problems to manager/project for awareness and/or resolution.
6. Uses limited independent judgment to make decisions based on precedents and established guidelines.
7. Solves problems using standard procedures and precedents
8. Performs other duties as required Performs other duties as required
 
Required Qualifications:
Education - Degree in Business, Engineering, Technology or related field.
Ability to learn the needs of the customer quickly and in line with the internal pace of the organization.
Ability to lead client calls.
Excellent command of Microsoft suite.

Preferred skills/experiences/education:
Experience with Business Analysis, Technical Requirements gathering and writing client facing Statement of Work documentation
Effective Communications Skills
Working knowledge of Service Now case management software.
Technical knowledge of company systems and integrations.
Financial industry experience and/or manufacturing
Technical Writing experience
 
 
Job Number: 1910109236
Job Location: Austin, TX
Duration: 6 months
Input Date: 11/20/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fW7OQAU&URLSource=cjhunter

Business Systems Analyst 1 - Compliance

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
 
  1. Participate in key initiatives to enhance IT Compliance
  2. Assist with application user security setup including request ticketing and user setup within applications such as Deltek Costpoint, IBM Cognos, Deltek Time & Expense, and others.
  3. Perform and support formal and informal application security audits.
  4. Work with cross-functional teams to review application security setup and implement application security design changes to help meet the organizations visions and goals.
  5. Assist in maintaining IT business system compliance with FAR, DFARS, ITAR, and SOX.
  6. Evaluate control gaps and document findings including corrective action plans.
  7. Design or modify system reports, security access rules and system constraints.
  8. Write and test procedures.
  9. Prepare detailed documented requirements for selected activities.
  10. May provide administrative support to project management staff in customer meetings, presentations and briefings.
  11. Maintain and establishes a filing system for correspondence, project status report, and other technical documentation for tracking and inventory control.
  12. Comply with hardware and software systems standards and procedures.
  13. Perform all other position related duties as assigned or requested.


 
Job Number: 1910107368
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMewQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*

*4 years experience= $65/hr, 8 years experience= $80/hr*


We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.


All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared


Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Some experience developing in a Windows environment

*Experience developing with C#, familiar with Qt

*Experience in Configuration Management (CM)

*Clearance re-investigation must have been within the last 5 years

*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication buses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Rate: $65-$80 DOE
Per Diem: yes split
Input Date: 02/21/2020
Last Updated: 03/27/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Combat AirCraft Training Spec 5

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 

 
Job Number: 1910105893
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVqQAO&URLSource=cjhunter

Combat AirCraft Training Spec 5 - G

Description:
PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

Summary:
  • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


 

 
Job Number: 1910105894
Job Location: Saint Louis, MO
Duration: 4 months
Input Date: 08/23/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVvQAO&URLSource=cjhunter

Combat Aircraft Training Specialist 5

Description:
Chipton-Ross is seeking a Combat Aircraft Training Specialist 5 for an openings in Saint Louis, MO.

RESPONSIBILITIES:
EA-18G highly experience Pilot Subject Matter Expert to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

EDUCATION:
Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181309
Job Location: Saint Louis, MO
Rate: $DOE
Duration: 4 Months
Input Date: 08/27/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Daniel McGowan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmcgowan@chiptonross.com
Website: www.chiptonross.com

Configuration Data Manager

Description:
PDS Tech is seeking a Configuration Data Management Specialist in St. Louis, MO

Job Purpose


Direct support of Configuration Management related activities.  Focus on various aspects related to software/hardware CM including, but not limited to, tracking, logging, categorizing, and maintaining changes made against accepted standards. Develop business metrics and reports needed by management. Responsible for maintaining all files for engineering drawings, processes and other related documentation.
 
Principal Accountabilities

  • Support the organization in developing data / information links and data structure to facilitate integration of company information systems and integrated metrics.
  • Regularly review processes; considering evolving internal policy and external processes.
  • Assess procedures for developing records management plans.
  • Maintain record copies of all applicable plans and deliverables.
  • Assess operation of source code libraries.
  • Analyzes data in company systems to produce meaningful management information.
  • Determines the most efficient way to collect data on a regular basis and leads the process.
  • Develops metrics from data gathered to generate regular and ad hoc reporting.
  • Leverages data consistency and accurately throughout the organization.
  • Interfaces with teams in different parts of the organization, including Information Technology, Engineering, Supply Chain and Finance to foster the integration of data and business processes.

***Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss.
Education
 
B.S. degree in Business Administration, Engineering or Operations.Combination of education and experience may be considered in lieu of degree.
 
Experience and Qualifications  
  • Three to five years of experience in Configuration or Data Management
  • Five to seven years of experience in manufacturing or engineering, working with Key Performance Indicators (KPI’s)
  • Proficient in ERP and/or PLM systems
  • Experience with document examination, such as engineering drawings, change orders and specifications to verify conformance.
  • Active DOD Secret Clearance is required to be considered, investigation close date must be within the last 5 years. 

***Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss.
 
Job Number: 1910105336
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 08/09/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPdQAO&URLSource=cjhunter

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Network Architect ( Dulles, VA ) TS9709441

Description:
Cyber Network Architect ( Dulles, VA ) TS9709441
13 Month Contract

TS/SCI clearable to SAP required.

Secure computer systems architecture and integration. Secure networking architecture and integration
Cybersecurity. (certifications in security and networking are highly desirable)

Will be acting as a consult to a team of program engineers and security professionals.**

Cyber Network Architect
Duties:
• Design security architectures for network(s) and reports to and consults with the IAM leadership.
o Identify vulnerabilities and perform risk assessments. Develop approaches to mitigate vulnerabilities, recommend changes to network as needed.
o Design, develop, and implement security designs for new or existing network(s).
o Ensure that the design of networks and software applications adequately address cybersecurity requirements for the environment.
o Provide input to IA A&A process activities and related documentation (system life- cycle support plans, concept of operations, operational procedures and maintenance training materials, etc.).
o Perform customer and internal trade studies on networking products to meet cybersecurity goals. The products will include white papers and presentations of ROI analysis for justification of capital investment.
o Collaborate with and provide engineering leadership and training for 8570-certified IAM and IAT personnel.
o Provide network related input on cybersecurity requirements to be included in statements of work and other appropriate procurement documents.
o Where appropriate, recommend and integrate and/or implement Cross Domain Solutions (CDS)

• Qualifications
o 5 years’ experience in classified IT and network design and integration
o DoD 8570-01.M IASAE Level I certification (CASP+ CE, CISSP (or Associate), CSSLP) is required,
o DoD 8570-01.M IAT Level II CCNA (required) or Level III CCNP Security (preferred).
 
Job Number: TS9709441
Job Location: Dulles, VA
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 month Contract
Start Date: ASAP
Input Date: 02/09/2020
Last Updated: 02/09/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Cyber Software Engineer

Description:
PDS Tech, Inc. is seeking am Cyber Software Engineer in Baltimore, MD.
Description: 

  • Roles and Responsibilities:
    Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met. Java and Nifi are highly desired.
     

Qualifications: Targeted Skills:
- Java and other high level development languages
- NiFi
- Linux OS
- Scripting Languages (Javascript, Perl, PHP, Python, Ruby, etc...)

Education: B.S. in Computer Science or other STEM field or 4 years of relevant software development/engineering experience in lieu of degree

Security Clearance: Active TS/SCI w/Polygraph

Desired Additional Skills/Backgrounds:
- Cyber Security
- RESTful
- Agile
- Jira
- C/C++
- Python
- Cloud (Apache Hadoop/AWS)
- Cloud development certification
- Spring
- Angular
- Test Automation
- Android app development
- UI/UX
- Database Administration
 
 
Job Number: 1910104515
Job Location: Annapolis, MD
Duration: 12 months
Input Date: 07/16/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTvLQAW&URLSource=cjhunter

Cyber System Administrator

Description:
Chipton-Ross is seeking a Cyber System Administrator for an opportunity in Schriever Air Force Base, CO.

RESPONSIBILITIES:
This Cyber Systems Administrator will support the newly awarded, five year, Air Force Space Command (AFSPC) Cyber Defense Engineering and Training II (CDET II) contract at Schriever AFB, Colorado in support of the Space and Missile Systems Center (SMC) Range and Network Center (RNC).
Duties:
o Makes recommendations on new solutions to improve cyber defense and IT performance issues with legacy assigned Government IT systems.
o Deploy improved DCO capabilities, including new user interfaces/dashboards to minimize training time and improve responsiveness to threats and anomalies.
o Maintains smooth operation of multi-user computer systems, including coordination with network administrators.
o Administers and manages cyber defense tools suites (for example, Host Base Security Suite, SIEM and IDS/IPS).
o Supports customers with the compliance with directives. Develops signatures and policies to mitigate new threats.
o Supports cyber incident analyst identification of compromise and mitigation actions.
o Develops and updates SOPs for cyber defense systems.
o Provide engineering support to facilitate centralized monitoring and active defense back at SAFB, in collaboration and in alignment with the Government cyber defense strategy.
o Develop requirements with supported SPOs in order to present an optimized, data-centric, and layered cyber defense approach, which facilitates continuous DCO monitoring, active defense, and incident response on all supported systems.
o Interacts with users and evaluates vendor products. Makes recommendations to purchase hardware and software, coordinates installation and provides backup recovery.
o Develops and monitors policies and standards for allocation related to the use of computing resources.
o Ancillary duties may include setting up administrator and service accounts, maintaining system documentation, tuning system performance, installing system wide software and allocating mass storage space. Provide recommendations for monitoring and improving cyber defense operations for each assigned Government IT system.
o Comply with applicable program security requirements as stated in the task order.
o Implement and adhere to security policies and classifications of the networks in accordance with the applicable Defense Information Systems Agency (DISA) and DoD classification guides.
o Storage and reporting of information shall be in accordance with the classification guides. Develops products including Tactics, Techniques, and Procedures (TTP), checklists, Best Practices, Handbooks, Workbooks, and other materials to include identifying information to be monitored; systems/software to provide monitoring capabilities; and recommended actions to implement similar capabilities across Air Force Space Command's (AFSPC) portfolio.
o Ensures solutions are consistent with organization objectives.

REQUIRED EXPERIENCE:
Bachelor's degree and a minimum 5 years of experience, including 3 years of SIEM/IDS/IPS maintenance/implementation experience. May consider 4 additional years of experience in lieu of degree (Total of 9 relevant years of experience with high school degree).
IAT III certification required: One required certification from the following: CASP+ CE, CCNP Security, CISA, CISSP (or Associate), GCED, GCIH.
Operating System Certification required: one certification from the following Linux +, Microsoft Certification.
One certification from the following required: CEH, CySA+, GICSP, SSCP, CHFI, CFR.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Ability to independently demonstrate the skill and ability to perform complex professional tasks.
Able to contribute to the development of new concepts, techniques, and standards.
Demonstrates the skill and ability required to perform complex tasks.
Ability to communicate effectively and clearly present technical approaches and findings.

EDUCATION:
High School degree/GED or Bachelor's degree is required.
School must be accredited.

HOURS:
5/40 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184033
Job Location: Schriever Air Force Base, CO
Rate: Up to $42.78 DOE
Duration: 1 year
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Cyber System Administrator

Description:
NOTE: US Citizen with an Active DoD Interim Top Secret/SCI Clearance is required to start. Must be able to obtain and maintain a TS/SCI security clearance. Please verify clearance with FSO and MUST have on top of resume: Active Secret - verified by FSO/via JPAS - xx/xx/xxxx (when investigation closed).

Chipton-Ross is seeking a Cyber System Administrator for an opportunity in Schriever Air Force Base, CO.

RESPONSIBILITIES:
The Cyber Systems Administrator will support the newly
awarded, five year, Air Force Space Command (AFSPC) Cyber Defense Engineering and Training II (CDET II) contract at Schriever AFB, Colorado in support of the 51st Space Wing or the SMC/RNC.
Duties:
o Makes recommendations on new solutions to improve cyber defense and IT performance issues with legacy assigned Government IT systems.
o Deploy improved DCO capabilities, including new user interfaces/dashboards to minimize training time and improve responsiveness to threats and anomalies.
o Maintains smooth operation of multi-user computer systems, including coordination with network administrators.
o Administers and manages cyber defense tools suites (for example, Host Base Security Suite, SIEM and IDS/IPS).
o Supports customers with the compliance with directives. Develops signatures and policies to mitigate new threats.
o Supports cyber incident analyst identification of compromise and mitigation actions.
o Develops and updates SOPs for cyber defense systems.
o Provide engineering support to facilitate centralized monitoring and active defense back at SAFB, in collaboration and in alignment with the Government cyber defense strategy.
o Develop requirements with supported SPOs in order to present an optimized, data-centric, and layered cyber defense approach, which facilitates continuous DCO monitoring, active defense, and incident response on all supported systems.
o Interacts with users and evaluates vendor products. Makes recommendations to purchase hardware and software, coordinates installation and provides backup recovery.
o Develops and monitors policies and standards for allocation related to the use of computing resources.
o Ancillary duties may include setting up administrator and service accounts, maintaining system documentation, tuning system performance, installing system wide software and allocating mass storage space. Provide recommendations for monitoring and improving cyber defense operations for each assigned Government IT system.
o Comply with applicable program security requirements as stated in the task order.
o Implement and adhere to security policies and classifications of the networks in accordance with the applicable Defense Information Systems Agency (DISA) and DoD classification guides.
o Storage and reporting of information shall be in accordance with the classification guides. Develops products including Tactics, Techniques, and Procedures (TTP), checklists, Best Practices, Handbooks, Workbooks, and other materials to include identifying information to be monitored; systems/software to provide monitoring capabilities; and recommended actions to implement similar capabilities across Air Force Space Command's (AFSPC) portfolio.
o Ensures solutions are consistent with organization objectives.

REQUIRED EXPERIENCE:
Bachelor's degree and a minimum 3 years of experience, including 3 years of SIEM/IDS/IPS maintenance/implementation experience. May consider 4 additional years of experience in lieu of degree (Total of 7 relevant years of experience with high school degree).
IAT III certification required: One required certification from the following: CASP+ CE, CCNP Security, CISA, CISSP (or Associate), GCED, GCIH.
Operating System Certification required: one certification from the following Linux +, Microsoft Certification.
One certification from the following required: CEH, CySA+, GICSP, SSCP, CHFI, CFR.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Ability to independently demonstrate the skill and ability to perform complex professional tasks.
Able to contribute to the development of new concepts, techniques, and standards.
Demonstrates the skill and ability required to perform complex tasks.
Ability to communicate effectively and clearly present technical approaches and findings.

EDUCATION:
High School degree/GED or Bachelor's degree is required.
School must be accredited.

HOURS:
5/40 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184037
Job Location: Schriever Air Force Base, CO
Rate: Up to $41.88 DOE
Duration: 1 year
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Cyber System Administrator

Description:
NOTE: US Citizen with an Active DoD Interim Top Secret/SCI Clearance is required to start. Must be able to obtain and maintain a TS/SCI security clearance. Please verify clearance with FSO and MUST have on top of resume: Active Secret - verified by FSO/via JPAS - xx/xx/xxxx (when investigation closed).

Chipton-Ross is seeking a Cyber System Administrator for an opportunity in Schriever Air Force Base, CO.

RESPONSIBILITIES:
This Cyber Systems Administrator will support the newly
awarded, five year, Air Force Space Command (AFSPC) Cyber Defense Engineering and Training II (CDET II) contract at Schriever AFB, Colorado in support of the 50th Space Wing.
Duties:
o Makes recommendations on new solutions to improve cyber defense and IT performance issues with legacy assigned Government IT systems.
o Deploy improved DCO capabilities, including new user interfaces/dashboards to minimize training time and improve responsiveness to threats and anomalies.
o Maintains smooth operation of multi-user computer systems, including coordination with network administrators.
o Administers and manages cyber defense tools suites (for example, Host Base Security Suite, SIEM and IDS/IPS).
o Supports customers with the compliance with directives. Develops signatures and policies to mitigate new threats.
o Supports cyber incident analyst identification of compromise and mitigation actions.
o Develops and updates SOPs for cyber defense systems.
o Provide engineering support to facilitate centralized monitoring and active defense back at SAFB, in collaboration and in alignment with the Government cyber defense strategy.
o Develop requirements with supported SPOs in order to present an optimized, data-centric, and layered cyber defense approach, which facilitates continuous DCO monitoring, active defense, and incident response on all supported systems.
o Interacts with users and evaluates vendor products. Makes recommendations to purchase hardware and software, coordinates installation and provides backup recovery.
o Develops and monitors policies and standards for allocation related to the use of computing resources.
o Ancillary duties may include setting up administrator and service accounts, maintaining system documentation, tuning system performance, installing system wide software and allocating mass storage space. Provide recommendations for monitoring and improving cyber defense operations for each assigned Government IT system.
o Comply with applicable program security requirements as stated in the task order.
o Implement and adhere to security policies and classifications of the networks in accordance with the applicable Defense Information Systems Agency (DISA) and DoD classification guides.
o Storage and reporting of information shall be in accordance with the classification guides. Develops products including Tactics, Techniques, and Procedures (TTP), checklists, Best Practices, Handbooks, Workbooks, and other materials to include identifying information to be monitored; systems/software to provide monitoring capabilities; and recommended actions to implement similar capabilities across Air Force Space Command's (AFSPC) portfolio.
o Ensures solutions are consistent with organization objectives.

REQUIRED EXPERIENCE:
Bachelor's degree and a minimum 3 years of experience, including 3 years of SIEM/IDS/IPS maintenance/implementation experience. May consider 4 additional years of experience in lieu of degree (Total of 7 relevant years of experience with high school degree).
IAT III certification required: One required certification from the following: CASP+ CE, CCNP Security, CISA, CISSP (or Associate), GCED, GCIH.
Operating System Certification required: one certification from the following Linux +, Microsoft Certification.
One certification from the following required: CEH, CySA+, GICSP, SSCP, CHFI, CFR.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Ability to independently demonstrate the skill and ability to perform complex professional tasks.
Able to contribute to the development of new concepts, techniques, and standards.
Demonstrates the skill and ability required to perform complex tasks.
Ability to communicate effectively and clearly present technical approaches and findings.

EDUCATION:
High School degree/GED or Bachelor's degree is required.
School must be accredited.

HOURS:
5/40 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184038
Job Location: Schriever Air Force Base, CO
Rate: Up to $42.05 DOE
Duration: 1 year
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Daniel McGowan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmcgowan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Processing Engineer

Description:
Data Processing Engineer

Edwards AFB, CA
$100/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
This position is with the F-35 Test Data Processing Systems home group in Fort Worth, TX stationed at Edwards AFB, CA as Field Support. This is a permanent position at Edwards AFB, CA reporting to management in Fort Worth, TX. The team uses a wide application of modern technical principles, theories, and concepts in the software and system hardware fields to develop, integrate, test and maintain Flight Test Data Processing Tools and Systems.

The successful candidate will be responsible for all phases of customer support as the local subject matter expert representing Company's F-35 data processing tools and systems. Candidate responsibilities will span all customer support activities as a funnel for new requirements and issue tracking to the development team, provider of training sessions (both formal and informal) to the customer, creator of recommendation reports to the customer, subject matter expert representing Company's Common Data Processing tool and conduit for technical data transfers.
The successful candidate will work with a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

Demonstrated customer relationship management experience is required. Experience with data processing tools, methodologies and IT systems is required. Must be able to stay technically ahead and maintain integrity with the ever-growing F-35 mission.

Must be able to work independently on complex systems supporting customers
* Be able to maintain Security+ certification and CEUs
* Have proper security clearance and appropriate PID access capability.
* Experience with Sustaining Systems / Software / Database Support.
* Experience with Company's Common Data Processing tool set
* Manage and maintain Windows servers and at least familiar with Linux and Sun Solaris servers.
* Perform operating system maintenance and updates for Windows.
* Maintain 3rd party software maintenance and updates on Windows.
* Install, manage, and update Lockheed Martin's CDP software.
* Manage system and data backup and recovery on Windows.
* Provide procedural continuity to Flight Data Analyst and supporting contractors.
* Solaris/Unix experience is a plus
* Supporting network configurations, security requirements, user profile management and system administration is to be expected
 
Job Number: 11926
Job Location: Edwards, CA
Rate: 100.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Processing Engineer

Description:
Data Processing Engineer

Edwards AFB, CA
$80/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
Engineering professional to join its Flight Test Data Operations group at Edwards AFB in support of flight test of the F22 Fighter.

Successful candidate will function as a Data Processing Engineer for Flight Test activity at the F22 Combined Test Force (CTF), Edwards Air Force Base, CA. Position is primarily tasked with supporting daily flight test data center operations by preparing and post-processing flight test data products.

Supporting tasks include:
* Receive, process and troubleshoot IRIG 106 formatted data products per established processes.
* Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities.
* Diagnosis and resolution of problems encountered in the recovery of test data.
* Develop, test, and troubleshoot data processing algorithms for aircraft data.
* Support IT assignments as required.

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

This position is for first shift (nominally 7am - 4pm). Candidate must be willing to work extended hours, weekends, and rotations to first in support of mission goals.

Candidate must have the communication, organization, and planning skills to handle a highly dynamic flight test environment.

Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position an active Secret security clearance, with a current background investigation is required.

**Must be a US Citizen. This position is located at a facility that requires special access.**
Experience working in a Flight Test organization

* Hardware and/or software programming experience

* Experience working with IRIG Standard 106 including Chapter 10 (recorded data) and Chapter 9 (TMATS)

* Experience with and/or knowledge of Teletronics Corporation (TTC) hardware and software

* Symvionics IADS (Interactive Analysis and Display System) use and programming

* Experience with and/or knowledge of Air Force Flight Test Center (AFFTC) regulations and operating procedures

* Experience with and/or knowledge of working with communications protocols, Specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485

* Excellent communication skills

* Demonstrated ability to develop and implement process improvement initiatives
 
Job Number: 11928
Job Location: Edwards, CA
Rate: 80.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Processing Engineer

Description:
Data Processing Engineer

Palmdale, CA
$90/hr
15 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description:
This company is looking for someone to join the historic Skunk Works™ as a flight test data processing engineer. The candidate will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale.

The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
* Receive, process and troubleshoot IRIG 106 formatted data products per established processes
* Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
* Diagnosis and resolution of problems encountered in the recovery of test data
* Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

The applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. This position requires an active Secret security clearance.

Must be a US Citizen. This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.

Desired skills
The ideal candidate possesses:
* Experience with IT infrastructure operations, computer networking, and/or software programming concepts
* Experience in data processing and network system administration
* Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
* Programming in C/C++
* Security+ certification
* Subject Matter Expert in data collection systems
* Experience working with the LM application Common Data Processing
* Experience with installation of Network Server systems for data processing
* Experience working in flight test
* Hardware and/or software programming experience
* Understanding of IRIG 106
* Experience with various instrumentation vendors hardware and software
* Symvionics IADS (Interactive Analysis and Display System) use and programming
* Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
* Demonstrated ability to develop and implement process improvement initiatives
* Excellent communication skills
* Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)
 
Job Number: 11924
Job Location: Palmdale, CA
Rate: 90.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM
 
Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

ERP Analyst

Description:
PDS Tech, Inc. is seeking a ERP Analyst in Hazelwood, MO. 

Job Purpose


Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process. Lead work in flow management by coordinating all day to day activities and communicating what needs to be done to operations and ensure all material is available prior to shop floor expected execution. 

Principal Accountabilities



  • Develop and implement strategy to communicate daily work schedule created by the Schedule/Planner to operations.  Ensure the appropriate schedule information to ensure the schedule is achievable.
  • Execution of the manufacturing work orders, tracking and reporting to ensure compliance to the daily schedules. Identify issues that prevent the successful execution of the daily schedules.
  • Provides the shop floor with work cell schedules based on the master production schedule.
  • Conduct Pre-Ops Readiness Reviews to ensure availability of required tooling, materials, planning, work instructions, and capacity to execute the daily schedules.
  • Expedite flow of materials, parts, and assemblies within or between departments in accordance with production schedules.
  • Maintains manufacturing LOB status, commitments and schedules.
  • Performs ERP and related business system transactions as required to support operations, supply chain and inventory management and business system compliance.
  • Releases, prints and delivers work orders to the start of the manufacturing process.
  • Performs cycle counts and make adjustments as necessary to inventory to ensure appropriate inventory reporting.
  • Manages WIP to ensure it continues to move through the production flow and raises issues that prevent the adequate flow of material to meet the production schedule.
  • Perform all duties in compliance with company policies and procedures.

Please email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss 




 

Education


BS/BA in Supply Chain/Business Administration or other relevant discipline preferred, and/or a combination of education and relevant experience in lieu of a degree. Recognized material management certification such as APICS preferred.

Required Qualifications & Experience



  • Requires 3 years of experience in Supply Chain Management or Manufacturing/Enterprise Resource Planning.
  • Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook.
  • Proven/demonstrated knowledge of Lean Manufacturing principles and working with Standard Work Instructions.


Additional Desired Qualifications & Experience



  • Previous experience working in a manufacturing environment and scheduling organization preferred.
  • Previous experience and working knowledge of ERP, MRP and other manufacturing systems preferred.
  • Ability to communicate clearly and professionally both orally and in writing.
  • Understanding and working knowledge of a manufacturing environment.
  • Excellent interpersonal skills.
  • High level of accuracy in reporting.
  • Self motivated with an ability to multitask with many diverse assignments.
  • Self directed to perform work with minimal supervisory oversight.


 PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 


 
Job Number: 1910105596
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 3 months
Input Date: 08/13/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX87QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Design Engineer

Description:
Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required
• Knowledge of Mentor Graphics Capital software is required
 
Job Number: 19-148021
Job Location: GA
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 02/28/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Design Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required
• Knowledge of Mentor Graphics Capital software is required

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-306
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

EWIS Design Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Unique skills: Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required
• Knowledge of Mentor Graphics Capital software is required

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374300
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 03/27/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Design Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
5. Aerospace Experience is required.
6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.
7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.
8. Knowledge of Catia V5 Electrical is required.
9. Knowledge of Mentor Graphics Capital software is required.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11909
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Elect Design and Analy Engr 4

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 12+ Months

Description:
The Electronics Products Shared Integrated Product Group at The Client Company's Satellite Development Center in El Segundo, California is seeking an experienced electrical engineer whose area of expertise is electronics test and automated test system design. Our automated test systems include those designed for testing RF/microwave/millimeter-wave electronics, power electronics, and digital electronics for space applications. Units requiring automated test range from single-board computers to switching networks, modems, and microwave electronics used in space-based applications. The person in this position will be responsible for test system architecture definition, hands-on test development and test system design, verification, validation and documentation, as well as providing project management and leadership for less senior personnel.

Applicable skills for this position range from test software development to electronics hardware specification and design. Experience in control, analog, digital or power supply circuit design is desired. Software/coding experience using LabView, Test Stand, C/C#, Python, FPGA Verilog/VHDL, and Matlab Signal Processing is a plus. Understanding intermodulation distortion, phase noise, and spurious measurement test techniques and familiarity with S-parameters is also a plus. Strong writing and presentation skills are required.

Responsibilities:
- Leading design teams of 2 to 10 people in automated test system development activities with cost and project schedule accountability
- Development of test system requirements and verification methodologies
- Make recommendations for test equipment procurement
- Hands-on design, documentation and design leadership of automated test system development projects
- Lead STE design reviews showing adherence to STE development processes
- Supporting test system proposals and bids
- Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage
- Participate in STE personnel development through mentoring and group presentations

Skill Code: 608-Elect Design and Analysis Engr-General

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/04/2020
Last Updated: 03/27/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
City, State: ENG - Peoria
Email: awdonofrio@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=297991&job_number=297991

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
We have an Excellent Contract to Hire position for an Electrical Engineer to join a leading Company located in the Vista, CA area.

Job Responsibilities:
Work as part of a cross-functional engineering team with Scientists, Mechanical, and Software Engineers to develop next-generation X-ray based security equipment.
Design PLC-based machine control systems, including circuit design, programming, motion control, and power distribution.
Develop X-ray detector data acquisition systems for R&D and production equipment.
Design printed circuits and direct PCB layout, fabrication, and assembly
Produce Engineering documentation such as design specifications, interface control documents, schematics, wiring diagrams, and bills of material.
Typically, we have no more than 2-3 Electrical Engineers working on any single project, and for smaller projects, the Engineer will work on their own to develop solutions, present concepts and designs in a review, and complete the implementation.

Basic Hiring Criteria:
BS in Electrical Engineering or similar with 5+ years of professional experience.
Able to see a design through from R&D to production, including writing specifications (system, subsystem, ICD’s, etc), developing design documentation, building prototypes, designing for production, and troubleshooting problems.
Experience in industrial control system design, including PLCs, object sensing, electrical interfaces, circuit protection, communications protocols, and power distribution.
Knowledge of PLC programming languages (IEC 61131)
Experience with electrical test equipment such as oscilloscopes, DMMs, function generators, bench supplies.
Familiar with a product development process including design specifications, design reviews, Engineering drawings and documentation formats, and ECR processes.
Comfortable working with and around Xray radiation producing machines, radioactive materials, high voltage, heavy machinery, electric and hydraulic power systems.
Able to effectively work with a cross-functional team of scientists, engineers, and technicians, as well as handle a wide range of multidisciplinary tasks.

Desired qualifications:
Knowledge of radiation detection technologies and data acquisition systems.
Knowledge of X-ray producing machinery.
Experience developing system architectures and designs for complex systems.
 
Job Number: 39674
Job Location: Vista, CA
Rate: 56.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 01/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Three Locations: Fort Worth, TX & Palmdale, CA & Marietta, GA
$64/hr
15 month W2 contract
First Shift
*DOD SECRET CLEARANCE HIGHLY PREFERRED*

Description:
Accepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.

Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.

Applies extensive technical expertise, and has full knowledge of other related disciplines. Develops technical solutions to complex problems which require the regular use of ingenuity and creativity.

Position may involve occasional travel and/or off-shift work.

Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: 11984
Job Location: Fort Worth, TX
Rate: 64.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15
Start Date: ASAP
Input Date: 01/15/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Three Locations: Fort Worth, TX & Palmdale, CA & Marietta, GA
$64/hr
15 month W2 contract
First Shift
*DOD SECRET CLEARANCE HIGHLY PREFERRED*

Description:
ccepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.


Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.

Complete understanding and wide application of technical principles, theories and concepts, in the field. General knowledge of other related disciplines. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.

Position may involve occasional travel and/or off-shift work.

Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: 11979
Job Location: Fort Worth, TX
Rate: 64.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 01/15/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Littleton, CO
$62/hr
7 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Position Description
Researches designs develops and tests a variety of electronic equipment and systems including radar and radiation detection equipment; radio television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment. Company Special Test Equipment (STE) team that supports multiple programs across within LM Space, building test racks that checkout flight hardware prior to spacecraft integration. This position is for the Raptor Avionics Project.

Skills Required
- Experience developing circuit card/box Special Test Equipment.
* Experience performing integration and test of circuit card/box STE.
* Experience with PWB design, cable design, and/or board verification.
* Hardware/Software test experience.
* Experience deriving requirements and writing specifications based on system requirements.
* Experience with electrical test system implementation and troubleshooting activities

Skills Preferred
* Experienced with Zuken CR8000, Design Gateway (schematic capture) and Design Force (layout)
* Fast-paced development experience.
* Knowledgeable with electrical parts selection and parts procurement
* Comfortable with troubleshooting electronic circuitry and assemblies
* Experience presenting and communicating effectively to a broad technical community

Experience Required
4 + years work experience

Experience Preferred
Special Test Equipment Design for Avionics and or Power Systems for Flight Card, Module or Box level testing. Willingness to learn new environments, work independently in fast-paced development environment.

Education Required
Bachelor's degree Electronics or Electrical Engineering, Computer Engineering degree
 
Job Number: 11955
Job Location: Littleton, CO
Rate: 62
Per Diem: Split Possible
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 12/11/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
PDS Tech is seeking an Electrical Engineer, in Florence, SC.

Summary:

  • Responsible for wiring diagram creation and maintenance, as well as controller and field wiring design.
  • Utilize knowledge of power components, distribution and protection, and controls theory and application.
  • Provide product support for a variety of electronic elevator components and electrical systems.
  • Must possess at least a bachelor's or its equivalent in Electrical Engineering and at least five years of work experience in an Electrical Engineering field. In the alternative, at least a master's or its equivalent in Electrical Engineering and at least three years of work experience in an Electrical Engineering field would be acceptable.
  • Must also possess the following: working knowledge of power distribution, protection and control systems; experience with electrical codes and standards, understanding of power components, distribution and protection, controls theory and application; electrical engineering background with wiring diagrams, system analysis, motor and control applications; experience with ECAD tools such as Cadence, PSpice, ViewLogic, AutoCad, E3; experience working across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel; understanding of PCB assembly and other manufacturing processes; and experience with test and measurement equipment. Any suitable combination of education/training and/or experience would be acceptable.


 
Job Number: 1910097443
Job Location: Florence, SC
Duration: 12 months
Input Date: 12/10/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8aGQAQ&URLSource=cjhunter

Electrical Engineer

Description:
Chipton-Ross is seeking an Electrical Engineer for an opportunity in Palmdale, CA.

RESPONSIBILITIES:
The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

The candidate will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Desired skills
The ideal candidate possesses:
Experience with IT infrastructure operations, computer networking, and/or software programming concepts
Experience in data processing and network system administration
Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
Programming in C/C++
Security+ certification
Subject Matter Expert in data collection systems
Experience working with the LM application Common Data Processing
Experience with installation of Network Server systems for data processing
Experience working in flight test
Hardware and/or software programming experience
Understanding of IRIG 106
Experience with various instrumentation vendors hardware and software
Symvionics IADS (Interactive Analysis and Display System) use and programming
Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
Demonstrated ability to develop and implement process improvement initiatives
Excellent communication skills

EDUCATION:
Accredited Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 183410
Job Location: Palmdale, CA
Rate: $DOE
Duration: 15 months
Input Date: 12/05/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:
Strong understanding of RF systems, measurement, and design; strong understanding of digital test and measurement, and FPGA and embedded design using C, C++, Labview or Altera software; integrate hardware and software into ATE systems


U.S. citizenship or permanent residency required

- Paid Holidays
- Dental
- Blue Cross/Blue Shield Medical Insurance
- Vision
- Direct Deposit
 
Job Number: EE1
Job Location: Texas
Input Date: 11/18/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Jerry Rothchild
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
800 Phone: 800/837-9114 x2705
Email: jrothchild@butler.com
Website: www.butler.com

Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part's list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2020
Last Updated: 03/27/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
City, State: Texas
Email: bsparks@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=298328&job_number=298328

Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Data Processing Engineer- Clearance CA

Description:
167082 Job Title: Electrical Engineer / Data Processing Eng

Work Site Address: Palmdale, CA 93599
Job Number: 2663-1
Max Pay Rate: $100.00/hr
Start Date: 11/21/2019
End Date: 2/8/2021
Position Type: Contract

Job Summary:
This position is with the F-35 Test Data Processing Systems home group in Fort Worth, TX stationed at Edwards AFB, CA as Field Support. The team uses a wide application of modern technical principles, theories, and concepts in the software and system hardware fields to develop, integrate, test and maintain Flight Test Data Processing Tools and Systems.

The successful candidate will be responsible for all phases of customer support as the local subject matter expert representing F-35 data processing tools and systems. Candidate responsibilities will span all customer support activities as a funnel for new requirements and issue tracking to the development team, provider of training sessions (both formal and informal) to the customer, creator of recommendation reports to the customer, subject matter expert representing Common Data Processing tool and conduit for technical data transfers.
The successful candidate will work with a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Demonstrated customer relationship management experience is required. Experience with data processing tools, methodologies and IT systems is required. Must be able to stay technically ahead and maintain integrity with the ever-growing F-35 mission.

Must be able to work independently on complex systems supporting customers
• Be able to maintain certification and CEUs
• Experience with Sustaining Systems / Software / Database Support.
• Experience with Common Data Processing tool set
• Manage and maintain Windows servers and at least familiar with Linux and Sun Solaris servers.
• Perform operating system maintenance and updates for Windows.
• Maintain 3rd party software maintenance and updates on Windows.
• Install, manage, and update CDP software.
• Manage system and data backup and recovery on Windows.
• Provide procedural continuity to Flight Data Analyst and supporting contractors.
• Solaris/Unix experience is a plus
• Supporting network configurations, security requirements, user profile management and system administration is to be expected

Qty 1 position
 
Job Number: JE-2663-1S
Job Location: Edwards AFB, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 02/03/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Electrical Test Engineer

Windsor Locks, CT
$67/hr DOE
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve testability concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

This is a Safety Sensitive position. Will accept someone with 2+ years experience up to and including 25+ years experience. Pay should be commensurate with experience.
 
Job Number: 12022
Job Location: Windsor Locks, CT
Rate: 30.00-67.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/08/2020
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical and Controls Engineer

Description:

PDS Tech, Inc. is seeking an Electrical and Controls Engineer, Muscatine, IA.

Summary:

  • Support the day-to-day electrical and instrumentation needs in a chemical manufacturing unit. This support may involve troubleshooting and some maintenance.
  • Together with process and mechanical engineers, develop scopes defining improvement projects (safety, yields, capacity, quality, reliability and cost improvement), including. alternatives and cost-benefit analysis, as needed.
  • Specify instruments (flow, pressure, temperature, etc.), control devices, motors, and other electrical components.
  • Review and evaluate vendor information for instrumentation and electrical components and determine suitability for specific projects applications.
  • Prepare maintenance plans for restoring and maintaining equipment to operating condition in a minimum amount of time, balancing repair cost and minimizing future failures.
  • Interacts with E&I maintenance technicians, production technicians, maintenance go-to, and others who work in and support the unit.
  • Create, modify and validate documentation related to process operations, safety, and applicable environmental regulations, as needed – including electrical drawings and engineering flow diagrams/P&ID diagrams.
  • Comply with plant safety rules.
  • Working knowledge of Engineering tools and software and ability to read and understand process flow diagrams, line drawings P&ID and schematics.


Prerequisites:

  • Looking for an electrical engineer who has experience within a manufacturing environment.
  • This position will be working with chemical and project engineers.

 
Job Number: 1910110239
Job Location: Muscatine, IA
Duration: 12 months
Input Date: 12/12/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Trudy Pollard
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fbiWQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Service Technician- AVCA

Description:
NESCO Resource has an excellent new opportunity for an Electromechanical Service Technician for our rapidly growing client! This is a temporary opportunity with the potential to become permanent!



The Electromechanical Service Technician will handle preventative maintenance and breakdowns for electric lift trucks at a client site while also serving as the lead with customers, management and other technicians.



Responsibilities:

  • Maintenance and service of fuel cells at customer sites.

  • Performing diagnostics, troubleshooting, and evaluations to maintain the fleet at a specific location.

  • Performing specialized service procedures, including field retrofits and software and hardware upgrades to existing fuel cells.

  • Providing emergency support service to customers as required. Serving as customer point person,

  • Purchasing tools, equipment, and parts for customer service and support as required.

  • May require troubleshooting and maintenance of high-pressure hydrogen storage, delivery and fueling systems.

  • May include maintaining ongoing communication with customer personnel hydrogen suppliers regarding aftermarket support of fuel cells.

  • Providing regular feedback to regional service representatives regarding fuel cell performance and field maintenance issues.

  • Completing administrative duties & documentation, including: incident reports, service logs, inventory maintenance and site and system documentation.

  • Exhibiting and enforcing safety procedures in the field or customer sites.

  • May be required to drive for Company business needs; expected to drive safely and to adhere to all traffic laws.


Required Skills and Experience


  • Electrical troubleshooting skills

  • Mechanical troubleshooting and repair skills

  • Knowledge of lift truck operation and applications

  • General mechanical aptitude

  • Proven leadership/management experience

  • Computer software skills – Windows, internet, Microsoft Outlook, Microsoft Excel, Microsoft Word

  • Strong verbal communication skills

  • Clear, precise written communicator

  • Creativity in solving technical problems

  • Ability to work independently

  • Good time management skills with the ability to handle multiple tasks

  • Punctual and reliable

  • Technician must provide own standard set of tools – specific fuel cell tools to be provided.

  • Minimum high school diploma or equivalent with technical electrical coursework

  • Three or more years direct experience in mechanical and electrical troubleshooting. Formal training and education may be also considered in lieu of direct experience.

  • Must possess a valid driver license, a clean driving record, and the ability to safely operate a motor vehicle.

  • Prior experience as an automotive technician, electrical technician, aviation mechanic, or military technician is preferred.


Candidates should be open to all shifts, weekends, overtime and holidays. Schedule will be determined between multiple technicians.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.



 
 
Job Number: 20-00309
Job Location: Apple Valley, CA
Rate: 23.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-07-17 00:00:00.0
Start Date: 2020-01-13 00:00:00.0
Input Date: 01/03/2020
Last Updated: 01/16/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Embedded S/W Engineer - Clearance GA

Description:
2884-1 Embedded S/W Engineer
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 1/29/2020
End Date: 1/19/2021

Job Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $72.00 Hourly
 
Job Number: JE-2884-1S6
Job Location: Marietta, GA
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year plus extension
Input Date: 01/07/2020
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Marietta, GA
$72/hr
1 year+ W2 contract
First Shift, 4x10
*MUST HAVE AN ACTIVE DoD SECRET CLEARANCE*

Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.
Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
 
Job Number: 12017
Job Location: Marietta, GA
Rate: 72.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/07/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Must be able to obtain active clearance

Real time embedded software development experience

Experience developing software using the Agile development methodology

Experience writing software using the C/C++ and JAVA programming languages

Red Hat Linux OS development experience

Familiarity using the Git, Gitlab, JIRA software tools
Experience implementing CI/CD software development pipelines
Experience with the Docker 'Platform As A Service' product suite
 
Job Number: 47751
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Mandatory
- Graphical User Interface (GUI) design/development experience
- Software development for execution in real-time
- Agile Scrum experience
- C/C++ development experience
- Python experience
- Linux development experience
- Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree.
- Active Secret Clearance is required for this role

Desired
- Git, Gitlab, JIRA
- Real-time visualization rendering using Unreal Engine
 
Job Number: 47871
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Must Have Active Secret Clearance

Experience developing and integrating real-time simulation code, user interface code, device driver code, data collection code and display code
Previous Missile HWIL experience

Experienced in the use of Concurrent HW
Experience developing real-time embedded software using the Ada and C++ programming languages
Experience developing software for the Linux OS
Experience implementing and testing missile Operational Flight Software
 
Job Number: 47783
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer job in Colorado Springs, CO is currently available through Belcan. In this role, you will be responsible for performing embedded and real-time software design. To be considered for this role, you will have a B.S. degree in Software Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Embedded Software Engineer Job duties:

* Develop detailed plans with resource schedules and guide product development to delight customers.
* Define software architecture.
* Define/Capture project software development requirements.
* Develop software for embedded applications.
* Report progress using data and metrics.

Qualifications:

* Understanding of embedded bus structures, processing, and I/O and memory chipsets.
* Demonstrated experience with embedded and real-time hardware environments.
* Software development in C/C++, OOP/OOD.
* Experience working with both DOD SW development standards and Agile Engineering practices.

If you are interested in this Embedded Software Engineer job in Colorado Springs, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297785
Job Location: Colorado Springs, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 02/04/2020
Firm Name: BELCAN TECHSERVICES
Attention: PaulLancaster
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Embedded Software Engineer

Description:
Designing & Developing embedded software solutions for highly complex software using C & Python for a Wind River based RTOS. Fixing bugs of the highly complex and time critical legacy s/w running since multiple decades. Developing test scripts using Python to test the functionality of embedded software.
Unix programming experience, preferably on Solaris or Linux
• C/C++ programming experiences, with an emphasis on embedded system programming
• Excellent problem-solving and analytical skills
• Excellent communication skills
• A passion for programming and software engineering
• Experience or proven ability in technical specifications
• Experience or proven ability in designing software
• Experience with Agile methodologies is a plus
• Experience in Python is a plus
• Experience in Clearcase is a plus
• Experience with git is a plus
 
Job Number: 06897
Job Location: East Coast
Rate: 65+hr.
Per Diem: yes
Input Date: 11/18/2019
Last Updated: 03/20/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Embedded Software Engineer (C++, Linux) (3-10 yrs. exp.)

Description:
Software Engineer C/C++, Ideally looking for 7-10 years experience with Embedded Software. Linux or any RTOS and Agile preferred 
Skills and Experiences
At least 3 years of software engineering experience
• Minimum 1 year Unix programming experience, preferably on Solaris or Linux
• C/C++ programming experiences, with an emphasis on embedded system programming

Education
BS or higher in Computer Science or related technical discipline
MUST be US Citizen/Green Card holder

If qualified, email a WORD version copy of your resume along with  your hourly pay rate and then call Peggy at 774-210-4108 to discuss!

Can you recommend anybody? Referrals appreciated!

 
 
Job Number: PL SWE CT
Job Location: CT
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ mos.
Start Date: 2 weeks
Input Date: 11/20/2019
Last Updated: 03/20/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Infrared and Aircraft Simulation

Description:
*This is a full time, 18 month contract position, located on site in Marietta, GA*


We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft simulation software. This includes pilot-in-the-loop fighter and airlift simulations and systems integration laboratories (SIL). The particular simulators include those for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft.



Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, debugging, verification /validation of aircraft avionics and other systems.



Required:

*4 years’ experience developing, integrating and testing simulation software in a high-level language (C++, Java, Ada). in a Unix or Windows environment.

*Experience with Infrared (IR) or Electro-Optical (EO) applications

*Active Secret Clearance, with an investigation in last 5 years.

*Engineering Degree



Pluses:

*Experience in Solaris or Linux systems

*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation

*Embedded RTOS development experience
 
Job Number: 073
Job Location: Marietta, GA
Rate: $66.00
Per Diem: yes split
Input Date: 12/26/2019
Last Updated: 01/17/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***MUST HAVE ACTIVE SECRET CLEARANCE***



REQUIREMENTS:

1. Must have Real Time Operating Systems Experience

2. Experience with Ada



Job Description:

Responsible for research, design, and development of computer software systems in conjunction with hardware product development. Primarily responsible for the design and development of software products for a variety of software applications.

Participates in all phases of the development life cycle, including requirements analysis, design, implementation, integration, and test of products.

Applies computer science, engineering, and mathematical analysis concepts and principles in the development of the target application. Works closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.

Develops software test procedures, software programs, and related documentation.

Contributes to determining, estimating, and validating the cost and scope of software efforts to ensure software performed meets program cost, schedule, and technical constraints.

Senior professional with strong knowledge of job area and broad knowledge of project management.

Manages complex projects or processes with general oversight.

Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures.

Makes moderate to substantial improvements to systems and processes.

Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.



Requirements;

MUST HAVE BACHELORS DEGREE

MUST BE US CITIZEN

MUST HAVE ACTIVE SECRET CLEARANCE 



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 

 
 
Job Number: 19-37326
Job Location: Clifton, NJ
Rate: 80.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-09-07 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 09/09/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Peter Voigt
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Software Engineer

Description:
We have an outstanding Contract to Hire position for a Enterprise Software Engineer to join a leading Company located in the Oklahoma City, OK area.

**Candidate must be able to obtain and maintain a Public Trust and Secret Security Clearance.**
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Basic Hiring Criteria:
A Bachelor's degree in computer science, information systems, engineering, or other related discipline is required.
Eight (8) years of relevant experience is equivalent to a Bachelor's degree.
Strong software development lifecycle background, especially with configuration control and quality assurance.
Experience C# and will participate in and provide support for the design, build, and implementation of system changes as well as participating in the maintenance of all processes and functions currently performed by the related systems.
Perform system analysis, design, programming, testing, and prepare system documentation and program specifications.
Experience with .Net Framework.
At least Twelve years of demonstrated experience is required in information systems development, functional and data requirements analysis, systems analysis, and design, programming, program design and documentation preparation.
A minimum of ten years must be intensive and progressive experience in managing the implementation of information engineering projects, systems analysis, design, and programming; client/server environments; and as specified in the task.
 
Job Number: 39734
Job Location: Oklahoma City, OK
Rate: $59 DOE
Duration: Temp to Hire
Start Date: ASAP
Input Date: 01/02/2020
Last Updated: 01/14/2020
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F/22 and F/35 Flight Test Software Engineer

Description:
***Requires Active Secret Clearance to Apply***
**15-18 Month Contract, located in Palmdale, CA**

Our client is seeking an F-22 and an F-35 Flight Test Software Engineer to develop data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.

Required Skills
*Experience developing, testing, and troubleshooting data processing algorithms for aircraft data
*Experience with hardware and software programming
*Experience with Teletronics (TTC) hardware and software
*Experience with IADS (Interactive Analysis and Display System) use and programming
*Experience working with Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
*Understanding of aeronautical telemetry applications and standards IRIG 106
*Bachelors Degree in Electrical Engineering, Computer Engineering or Aerospace Engineering

Desired
*Experience with and/or knowledge of Air Force Flight Test Center (AFFTC) regulations and operating procedures
*Masters Degree in Electrical Engineering, Computer Engineering or Aerospace Engineering
 
Job Number: 1115
Job Location: Edwards AFB
Rate: DOE
Per Diem: yes split
Input Date: 12/26/2019
Last Updated: 01/24/2020
Firm Name: CSS STAFFING
Attention: shay
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer ( Plymouth, MN ) S9664769

Description:
Principal Engineer ( Plymouth, MN ) S9664769
12 month Contract

Pay rate: Open

Sr Principal Design Engineer.

Clearance: Secret Clearance Required.

Duration: 1 yr Contract, Contract to Hire. 50/50 potential to convert.
TOP SKILLS: FPGA Design experience, Subject matter expert in coding VHDL/Verilog, preferably experience with Xilinx FPGAs and respective firmware tools. Proficient in digital verification, validation, and debug. Digital logic design experience.//

*Roles and Responsibilities -
• Perform FPGA design, simulation, and documentation using product families such as Xilinx Kintex7, Virtex7, Zynq, Ultrascale, RFSoc and Altera Stratix.
• Conduct testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, and FPGA debugging tools.
• Define and develop specifications and test procedures.
• Can review and critique designs created by peers and/or junior engineers.
• Is proficient at recognizing the unique design requirements such as safety and reliability architectures associated with military applications.
• Compiles and analyzes test data to determine design effects on electrical circuits for military applications.
• Define development test plans and methods to ensure a robust design is achieved.
• Strong analytical skills and the ability organize/prioritize job assignments and tasks.
• Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact circuit requirements and design constraints.//

**Basic Qualifications
- Bachelor’s Degree in EE or Computer Engineering and 9 years of relevant experience or a Master’s Degree with 7 years of relevant experience.
- Experience in FPGA design and development using VHDL or Verilog.
- Experience with Simulation tools.
- Experience with setting and managing design constraints to meet critical timing requirements.
- Experience with FPGA design verification using hardware verification and debugging tools.
- Experience in the use of lab equipment such as oscilloscopes and logic analyzers.
- Experience in creating and managing technical documentation such as architecture and interface control documents.
- Experience in Hardware/Software integration.
 
Job Number: S9664769
Job Location: Plymouth, MN
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 01/11/2020
Last Updated: 01/19/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst - no clearance TX

Description:
167396 Job Title: Financial Analyst

Work Site Address: Fort Worth, TX 76108
Job Number: 3024-1
Max Pay Rate: $46.00/hr
Start Date: 1/28/2020
End Date: 4/28/2021
Position Type: Contract

Job Summary:
Performs economic research and studies subjects such as rates of return, depreciation, working capital, investments, and financial and expense comparisons by analysis of profit and loss statements and income statements

Prepares reports of findings and recommendations to management. Develops, maintains, and establishes operational specifications for financial information systems considering such things as information flow, volume, and document format for data processing equipment. May provide analysis on business development and may monitor business performance by unit or division.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Skills: Category Name Required Importance Experience
Software Skills MS Excel Intermediate No 1 4 - 6 Years
Technical Skills Cost Tracking No 1 4 - 6 Years

Qty 1 position
 
Job Number: JE-3024-1
Job Location: Fort Worth, TX
Rate: 46/hr
Duration: 15 months
Input Date: 01/16/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Flight Controls Engineer

Description:
Responsibilities
·       Evaluate requirements for traceability, correctness, and completeness
·       Provide analysis and input as required to verify compliance with ARP4754A and DO178C
·       Provide specialized technical assistance to team members as needed
·       Initiate and validate improvements to the design and documentation of the Flight Control System
·       Maintain schedule and cost objectives
Minimum Qualifications
·       Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
·       7+ years of experience in flight controls of Aircraft in both software and hardware
·       Demonstrated communication skills to convince, justify and influence
·       Expert understanding of ARP 4754, and DO178C
·       DER / UM / DAD / Certification Engineer, active or previous – preferred
 

 
Job Number: 1910106255
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/12/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fHHlQAM&URLSource=cjhunter

Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

Description:
166860 Job Title: Flight Controls Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2648-1
Max Pay Rate: $85.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
(1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
(2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
(3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
(4) coordinate as required with other organizations associated with test readiness.

This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.

Desired Skills
(F-16 experience is highly preferred / F-22 & F35 experience desired)
Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired.
-Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


Qty 4 positions

Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
Work location is Edwards AFB
 
Job Number: JE-2648-1S
Job Location: Edwards AFB, CA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/27/2019
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards AFB, CA
$85/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11932
Job Location: Edwards, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/08/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

Flight Test Instrumentation Engineer

Description:
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system.
Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.
Flexibility to make business travels and also possible relocation between Japan and US are expected.

Responsibilities:
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Bachelor degree along with a minimum of 1 year of flight test operations experience
-Or-
A minimum of 5 years experience in flight test operations in lieu of the degree
Excellent demonstrated verbal and written communication skills
Ability to defuse and resolve conflict among other team members
Ability to quickly learn new software and systems
Must be capable and comfortable working within a diverse team environment
Strong oral, written, and presentation communication skills

Desired
Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
Experience in design of instrumentation installation of sensors, wiring and equipment
Ability to perform strain gage installations
Knowledge of flight test operations and certification requirements.
Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols
Knowledge on telemetry and data monitoring systems

 
 
Job Number: 1910107312
Job Location: Nagoya,
Duration: 24 months
Input Date: 09/26/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMT0QAM&URLSource=cjhunter

Forms Management Specialist

Description:
Chipton-Ross is seeking 3 Forms Management Specialists located in Mesa, AZ

RESPONSIBILITIES:
The Forms Management team helps employees across client create, access, understand, harness, manage, and disseminate information. They optimize the latest developments in information management strategies to support client innovation and competitiveness, delivering high quality, cost effective solutions on a global scale. The Forms Management Specialist will provide forms analysis, design and development, documentation, testing, and technical support using Adobe products and possibly ServiceNow tool in the near future.
Designs and maintains dynamic electronic forms utilizing advanced scripting techniques and workflow processes
Develops or customizes workflow applications to streamline business partner processes
Consults with process owners or process teams to analyze requirements and makes recommendations that utilize capabilities of development software and reduce manual processing
Utilizes configuration management tools, design tools, debugging tools, and any other environment specific tools necessary to create, test, and implement an application
Integrates workflow processes with various data sources
Shares knowledge with peers and recommends changes to common tools
Develops Information Management Designer training materials
Delivers end-user training and Forms website content, as required
Provides mentoring and guidance to junior peers
Supports the integration with associated Information Management lifecycle functions, business process architecture and Enterprise information system architecture
Develops and configures business process automations per low level design and technical design documentation to meet defined requirements. Comply with and help to enforce design and coding standards, policies, and procedures. Ensure quality of coded components by performing thorough testing.

EDUCATION:
Accredited Bachelor's and typically 6 or more years related work experience, a Masters degree and typically 4 or more years related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 183789
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 12/23/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware and Lab Management Engineer

Description:
Hardware and Lab Management Engineer

Job ID # 2020-10556

Contract Opportunity

Location:  Fairfax, VA

Industry: Defense

Minimum Clearance: Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 8 years

 

What You’ll Do:

Perform requirements analysis, requirements definition, requirements management, functional analysis, performance analysis, system design, detail trade studies, systems integration and test (verification), validation and interface definition studies of system, subsystem or system elements with minimal supervision of the lead systems engineer
Perform technical planning, cost and risk analyses, and supportability and effectiveness analyses for subsystems and system elements
Perform customer requirements analysis, develops system requirements and defines allocations to lower levels (subsystem, elements and components)
Perform detailed technical analyses for a system, subsystem or system elements
Develop and evaluates systems, networks and information systems to ensure designs meet applicable governmental security specifications
May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
May develop system security documentation on both new and fielded information systems
Contribute to detailed technical analyses at the system of system (SOS) level
Synthesize solutions to meet customer expectations and technical performance while staying within schedule and cost constraints
Lead Modeling and Simulation activities
Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
Support the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycle
Research, design, and develop systems, in conjunction with software and hardware product development, applying principles and techniques of systems engineering, modeling and simulation and analysis
Provide leadership and/or direction to lower level employees
Lead technical tasks for small teams or projects
Begin to provide engineering support to proposals
Participate in or leads SOW generation for subcontracts
Exercise latitude in determining technical objectives of assignments
Guide the successful completion of major programs and projects
Plan and execute significant project tasks for activities described above
Creative, innovative responsibilities requiring advanced decision-making skills
Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
Design a complete and complex framework, system or product
Determine methods and procedures on new assignments and may coordinate activities of other personnel (Team Lead)
Exercise judgment in selecting methods, techniques and evaluation criteria for obtaining results
Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues in creative and effective ways
Identify, analyze and resolve system design weaknesses
Frequent contact with managers within and outside of Engineering
Frequent contact with project teams across the company
Frequent contact with external customers and vendors
Occasional contact with Business Development
Work without appreciable direction
Provide resolution to a diverse range of complex problems which require the use of ingenuity and creativity
Keep abreast of technology trends
Contribute to the achievement of business objectives
Contribute to the development of new theories and method
Travel may be required
 

What You’ll Need:

Secret security clearance is required.
Strong use and understanding of systems engineering concepts, principles, and theories
Strong knowledge of other related disciplines
Strong proficiency with requirements management & system modeling tools
Recognizes various architectural patterns and applies them appropriately
Strong proficiency in Microsoft Office applications
Strong written and verbal communications skills
Ability to get buy-in on concepts and ideas
Creative thinker
Ability to multi-task
Effective in communicating issues, impacts, and corrective actions
Strong ability to clearly report information relevant to sound systems engineering design
Strong understanding of basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls
Agile experience is preferred.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s degree combined with 8+ years of relevant experience; Master’s degree combined with 6+ years; equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10556
Job Location: Fairfax, VA
Input Date: 01/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Health and Safety Technician

Description:

PDS Tech, Inc. is seeking a Health and Safety Technician, in Saint Louis, MO.

Summary:

  • Conduct air, noise, and IAQ sampling.
  • Conduct noise mapping of the Chesterfield and Creve Coeur locations.
  • Complete ergonomic evaluations as needed.
  • Conduct ergonomic training for the site.
  • Manage the OES (Office Ergonomic Software) program by running reports, updating profiles, and assigning in-person ergonomic evaluations..
  • Ergonomic Sharepoint and Database Updates.
  • Update and manage the Chemical Exposure Assessment Plan.
  • Audit the Chemical Management Program to ensure research chemicals are being labeled appropriately and reconcile the inventory.
  • Manages the Fire Control Program by using Chemwatch.
  • Hearing Conservation Database Updates.
  • Manage the IH Equipment Calibrations.


 

Basic Qualifications:

  • The candidate must be able to work independently after receiving direction on work projects.
  • Candidate must also be able to assess programs for effectiveness and operational effectiveness.
  • This position also requires travel to various sites in the St. Louis area.
  • Applied work experience in performing ergonomic evaluations and air, noise, and IAQ sampling is required.
  • The candidate must be able to work with Microsoft Office including Access.
  • Candidate should also be able to operate as a team member.
  • Must have a high level of detail in the scope of work performed. 

 
Job Number: 1910109081
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 11/18/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVHdQAM&URLSource=cjhunter

Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 03/27/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
City, State: ENG - Peoria
Email: driley@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=297938&job_number=297938

IT Project Services

Description:
You work closely with the Client and our Product and Development teams to ensure the solution meets the client’s needs from a content, design and quality perspective. The client’s first point of contact for technical expertise will be you.
On larger projects, you will lead a team Specialist Engineers working on different solution phases. You provide technical supervision and will support the Project Manager in estimation and planning tasks.
You may work with our Sales team by supporting Requests for Proposals and presenting Dovetail technology to clients as appropriate.
Core Java/Multi-threading, J2EE (EJB/JMS/Oracle/SQL)
Design patterns, Troubleshooting issues, SOA/Web services, Transactions management
Client facing
Coordinating/Collaborating with different teams and developers
Experience in requirements gathering, client meetings for issue resolution and enhancements
Work with different teams in gathering requirements and delegating work to different development teams
US ACH knowledge and experience a must have
 
Essential Skills and Experience:
7-10 years Java experience in software design and implementation in distributed, object-oriented languages
5+ years in leadership engineer or lead architect capacity
Degree or equivalent in a technical, engineering or scientific discipline
Good communication skills
Strong analytical, problem solving and object-oriented skills
Large-scale software development, ideally commercial software
Automated unit, integration, system and performance testing
Strong experience in different middleware technologies and servers
Strong relational database knowledge


Highly Desirable Skills:
Experience in the banking or financial industry
Stakeholder management experience
WebSphere, WebLogic, JBoss application server experience
Oracle RDBMS experience
Team leading experience
Commercial awareness
Performance tuning (Application server and database)
 
 
Job Number: 2010110555
Job Location: Parsippany, NJ
Duration: 6 months
Input Date: 01/10/2020
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fe8rQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information Systems Security Officer (ISSO) - Secret Clearance

Description:
Job Description:

-Identifies key stakeholders in the A&A effort for medical systems and networks and works with them to confirm that the system documentation reflects the current security configuration of the system, in terms of hardware and software components, data flow, interconnections, and ports, protocols, and services



-Identifies potential risks associated with the configuration of the system and appropriate mitigation strategies



-Conducts status meetings and determines next steps in moving the systems toward a successful accreditation effort



-Works with the cybersecurity team to develop and implement the detailed test plan and review findings from self-assessment to determine readiness for independent assessment



-Assist in drafting "Authorization to Operate (ATO) packages for new and existing systems.

-Provide subject matter expertise in all cyber security initiatives and help in explaining new guidance.

-Draft documentation needed to announce new cyber security initiatives and participate building and implementing processes surrounding cyber security.

-Provide cyber security reports to DHA leadership, conduct scans and participate in the process to obtain ATO status for systems determined by DHA and/or MTF leadership.

-Complies with MTF cyber security program implementation plan, and ensures compliance with DHA management policies.



-Assists the system owners and system SAs in interpreting and applying mitigation strategies

-Ensure compliance with data security policies and relevant legal and regulatory requirements in accordance with DHA directives and applicable Risk management Framework (RMF) requirements.

-Ensure appropriate changes and improvement actions are implemented as required.

-Ensure compliance with protection requirements, control procedures, incident management reporting, remote access requirements, and system management for all systems under scope.



Education:

BS degree in Engineering, Physics, Network Security, or Computer Science.



Experience:

Fifteen (15) years of experience in Engineering, Systems Analysis, Medical Systems, Information Assurance, Web Development, or Engineering Management, to include: Technology

Analysis and Assessment, Design Definition, Development of Systems Specification, Systems Analysis, Systems Architecture, Systems/Equipment Integration, Test & Evaluation Criteria, and Logistics support of C4ISR requirements. Must have managerial or supervisory experience in the information technology

arena.



Note: Experience may be concurrent.

Advanced degrees substitute for experience as follows:

Ph.D. five (5) years of experience; MS two (2) years of experience

 
Job Number: 19-47557
Job Location: Rosslyn, VA
Rate: 60.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-12-13 00:00:00.0
Start Date: 2019-12-16 00:00:00.0
Input Date: 11/19/2019
Last Updated: 03/20/2020
Firm Name: NESCO RESOURCE
Attention: Peter Voigt
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Infrastructure Architect - ENOVIA

Description:
We are currently seeking an Infrastructure Architect with previous ENOVIA or 3DExperince skills to fill an opening with an automotive company in Ohio. Interested candidates should also be familiar with application installation and management.


Responsibilities of the Infrastructure Architect
Implement ENOVIA PLM solutions for mid-market and large enterprise, which includes infrastructure, installation, design, development, prototyping, customizing and implementing ENOVIA 3DExperience solutions.
Lead the installation and configuration needed to create Development, QA, and Production environments for the 3DEXPERIENCE platform and associated solution elements.
Ensuring environments meet all requirements both in hardware configuration and software.
Analyze, design, code, test and debug existing and new programs to support the customization of ENOVIA applications.
Work closely with the Solution/Software Architects to understand functional specifications.


Requirements
5 Years or more experience in Solutioning, Administration, Customization and Implementation of 3DExperience\Enovia V5.
Proficient with CAA/C++, MQL, Java, Javascript, EKL and Object Oriented development skills and knowledge of code change management tools like git.
Demonstrated understanding of HTML, CSS, Java Server Pages (JSP), AJAX and related concepts.
Strong SQL skills and understanding of relational databases.
Strong systems knowledge along with knowledge of 3DExperience\Enovia-PLM standards and methodologies.
Strong systems knowledge along with knowledge of 3DExperience\Enovia VPM standards and methodologies.
 
Job Location: OH
Input Date: 01/30/2020
Last Updated: 03/24/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: abondy@velocity-cs.com
Website: www.velocity-cs.com

JTC_Administrative Support

Description:
Chipton-Ross is seeking an Administrative Support for an opportunity in Syracuse, NY

RESPONSIBILITIES:
Utilize hi-speed print production printers, wide-format production printers, folders, punches and cutters to produce high-quality materials for distribution. Collates, folds, staples, binds, cuts, drills, mounts, and packages printed materials according to job specifications. Interface with customers to determine requirements and priorities. Responds to telephone and email inquiries concerning the status of customer's work order and general duplication questions; notifies customers when orders are completed; resolves questions or issues related to production. Performs basic maintenance of all production equipment including preventive maintenance and general cleaning; contacts service representative for machine problems requiring major repairs. Performs data entry function to create job tickets for tracking and billing purposes. Maintains inventory of paper and other supplies. Keeps work areas orderly, clean, and safe; ensures proper care in the use of equipment and supplies. Performs miscellaneous job-related duties as assigned. Able to lift boxes of paper and perform repetitive print production tasks.

REQUIRED EXPERIENCE:
Xerox high-speed and wide format printer operation, finishing operations including folding, cutting, binding, etc. Set up jobs in PDF using Fiery software (OTJ training

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 183143
Job Location: Syracuse, NY
Rate: $DOE
Duration: 12 MONTHS
Input Date: 11/19/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: LaVada Pulley
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lpulley@chiptonross.com
Website: www.chiptonross.com

Java Developer 3 (Mid Level)

Description:


Chipton-Ross is seeking a Java Developer 3 (Mid Level) for an opportunity in Lorton (VA), Springfield (VA), Falls Church (VA).

RESPONSIBILITIES:
Put your years of experience into a future of excellence! The qualified applicant will become part of Northrop Grumman's team to support the U.S. Customs and Border Protection (CBP) Passenger Systems Program Directorate (PSPD) suite of computer and automated software applications. CBP PSPD supports a broad range of complex business systems which are instrumental to the CBP mission of securing our borders while facilitating legitimate trade and travel. This position requires a highly motivated, self-reliant team player.
Develop applications - in a Unix/Linux and Windows VM environment to ensure performance and data availability - using full stack java.
Apply required updates and patches, monitor and tune system to achieve optimum performance levels, and provide reports to support metrics collection.
Support the Agile process using SCRUM methodology and Jira.
Some local travel to customer sites may be required.
Location: Lorton (VA), Springfield (VA), Alexandria (VA), Falls Church (VA). No Telework.

REQUIRED EXPERIENCE:
5 Years relevant experience with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
This role will require hands on technical skills, with prior experience developing using one or more of the following technologies: Java / J2EE / Enterprise Java solutions; Java frameworks, including Spring, Struts, and Hibernate; Oracle Database technologies and/or Web Application hosting on WebLogic.
Experience with Agile toolsets, such as JIRA and Confluence.
Experience with Agile project management methodologies, including Scrum.
Ability to communicate effectively with other team members.
Must be a team player, self-motivated, self-starter and a quick learner.
Ability to complete tasks and projects within deadlines.
Good written and verbal communication skills coupled with strong listening skills.
Good problem solving, analytical skills.
Preferred Qualifications:
Experience with Atlassian toolset, including Jira, Confluence, and Bamboo.
Prior experience with CBP.
Certified ScrumMaster and/or Certified Product Owner desired with Scrum and or Scaled Agile Framework for the enterprise (SAFe) experience.

EDUCATION:
Bachelors in Science, Masters, or PhD.

HOURS:
5/40 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.



 
Job Number: 178922
Job Location: Lorton, VA
Rate: Up to $66.09 DOE
Duration: 3 months, CTH
Input Date: 11/10/2019
Last Updated: 03/27/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Embedded Software Engineer

Description:
A Lead Embedded Software Engineer job in Colorado Springs, CO is currently available through Belcan. In this role, you will be responsible for leading the embedded and real-time software personnel in all aspects of design. To be considered for this role, you will have a Bachelor"s degree in Software Engineering, a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Lead Embedded Software Engineer Job duties:

* Develop detailed plans with resource schedules and guide product development to delight customers.
* Define software architecture.
* Define/Capture project software development requirements.
* Develop software for embedded applications. Object-oriented principles are preferred.
* Estimate project software development effort and deliver on-time.

Qualifications:

* Experience managing software teams.
* Demonstrated experience with embedded and real-time hardware environments.
* Software development in C/C++, OOP/OOD.
* Experience working with both DOD SW development standards and Agile Engineering practices.

If you are interested in this Lead Embedded Software Engineer job in Colorado Springs, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297928
Job Location: Colorado Springs, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/17/2019
Last Updated: 01/16/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Machine Operator - 2nd shift / Micrometer CNC Caliper Measuring Tools - no clearance MA

Description:
166770
Job Title: Machine Operator

Work Site Address including City, State, Zip: Marion, MA 02738
Job Number: 2564-1
Max Pay Rate: $19.00/hr
Start Date: 11/18/2019
End Date: 11/16/2020
Position Type: Contract

Job Summary:
Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws.

May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Familiar with Mikrometer, CNC and/or Caliper Measuring Tools.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Computerized Numerical Control (CNC) No 1 < 1 Year Qty 1 position This position is 2nd Shift This position does not require a BS Degree Manager would prefer candidates familiar with Micrometer, CNC and/or Caliper Measuring Tools. Required OT Hrs/Wk: 10.00
 
Job Number: LMRMS-2564-1
Job Location: Marion, MA
Rate: 19/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 03/26/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Position Description:
In your role, you will be responsible to produce the documents for putting together assemblies, based on drawings and specifications. You will harmonize the implementation of changes and will work closely with the Engineering, Material Logistics and Methods departments in Mexico. You will be called upon to take an active part in the configuration management and support production. You are expected to participate in or manage various improvement projects.
As our ideal candidate, you have a college degree in aerospace with a minimum of two (2) years of relevant experience. You are familiar with Bombardier Aerospace business processes, especially configuration management and Manufacturing. You must have a good analytical mind and be comfortable reading engineering drawings. You are an excellent team player. Your aircraft and design experience will be an asset.
Requirements:
Possibility that candidate will be required to work evening shift.
Key Skills:
Must have a minimum of two (2) years of relevant experience. Familiarity with Company Aerospace business processes, especially configuration management and Manufacturing is an asset. Must have a good analytical mind and be comfortable reading engineering drawings. Previous aircraft and design experience is an asset. Previous experience using Mentor Graphics software is an asset.
Education/Degree:
Technical College Diploma
 
Job Number: 8975
Job Location: (Queretaro), Mexico
Rate: ask recruiter
Per Diem: Yes
Overtime: straight time
Duration: 6 month contract
Start Date: ASAP
Input Date: 01/15/2020
Firm Name: EXPLEO GROUP
Attention: Faith
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 2

Description:
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.

Desired:
Experienced with SAP Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel). Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Strong written and verbal communication skills. Knowledge of Lean manufacturing concepts and techniques, Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts Leadership experience Experience in a Manufacturing environment

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5

Work Instruction Development Development of Work Manufacturing Instructions for CCA or C&H build in SAP. 3 0-3 Years Yes
Hardware Process Development CCA, ECA, and/or C&H 3 0-3 Years Yes
Direct Production Support Provide direction and training to hourly production workers 5 0-3 Years Yes

Special Needs
Category Description Recurring Frequency Mandatory
Training SAP No N/A No
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 19-16599
Job Location: Ocala, FL
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Input Date: 12/12/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Supervisor| Direct Hire

Description:
Nesco Resource has an exciting opportunity for the right candidate!



We're seeking a responsible candidate with 5+ years of experience to join our client's Manufacturing Team a fast-growing medical device company.



Open work environment, Team-based, and fast-paced.



Job Details:

Packaging Department


Openings: 1

Title: Packaging Supervisor

Location: Addison, Tx




Job Summary: The packaging supervisor is responsible for overseeing the packaging of medical devices in accordance with Standard Operating Procedures and product specific methods. These responsibilities include the supervision, guidance and evaluation of packaging personnel in accordance with our client's procedures and policies.



Duties and Essential Job Functions:

  • Supervise and perform packaging of medical devices to controlled specifications and processes

  • Supervising and documenting packaging operations as required

  • Assigns work schedules and ensures efficient production coverage by assessing available of appropriate Team Members (i.e. daily staffing, PTO, scheduling, training matrix, etc.) and notify Team Leads / Dept. Manager of conflicts as needed

  • Ensures department is run effectively with priority on safety and quality

  • Responsible for meeting standard production timelines

  • Devises action plans for non-conforming/non-standard issues

  • Growth and Development of employees through appropriate coaching and exemplification of the company's core values

  • Maintaining control of assigned in-process materials and tools

  • Providing training to packaging personnel for processes, procedures and safe equipment use.

  • Acts as an extension to Management in their respective department

  • Assumes responsibility for the 5S in responsible area

  • Ensures that Daily Performance Metrics are communicated and met

  • Participates in cross-functional team activities in the development and implementation of new processes, tools and / or equipment and as part of the normal operational needs

  • Assists in the orientation / training of new Team Members and Contingent Labor to the manufacturing process

  • Maintains supervisor's files including electronic personnel transactions, labor, production and quality reports

  • Conducts periodic reviews of existing tooling, fixtures, and gauges

  • Defines / implements cost effective replacements as technology requires

  • Consistently demonstrate ability to respond to changing situations in a flexible manner in order to meet current needs, such as reprioritizing work as necessary










Experience/Skills Required:


  • 3 + years of Supervisory/Management experience. 5+ direct reports- Preferred

  • Experience working in Manufacturing around machining

  • Ability to think analytically

  • Ability to understand and solve manufacturing problems

  • Ability to prioritize/re-prioritize tasks, and successfully conducts root-cause analysis and implements counter measures

  • Ability to deal with technical, scheduling, project management and cost related issues

  • Ability to Supervise and develop others

  • Strong knowledge of manufacturing processes

  • Sound business acumen

  • Computer literacy required: Microsoft Office including spreadsheet, Power Point, and Database MRP/ERP software

  • Demonstrated ability to communicate orally or in written form with co-workers, Team Members, Managers, Customers, and/or vendors as required

  • Flexibility in schedule to ensure customers' needs have been met




Required Education:


  • Associate Degree or equivalent and relevant work experience.




Physical Requirements:


  • Able to frequently lift up to 10lb and occasionally up to 40lb.

  • Able to work 12 hour shifts and overtime when required.

  • Able to properly wear PPE (Personal Protective Equipment) required for the area of operation such as gloves, ear protection, eye protection, smocks, etc.

  • Able to stand for long periods of time, bend, stoop, lift, reach above shoulders, pull, push, climb up/down stairs.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-51006
Job Location: Addison, TX
Rate: 65000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2020-01-13 00:00:00.0
Input Date: 12/20/2019
Last Updated: 02/11/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Bachelors of Science degree in Mechanical Engineering with a strong technical background, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).

Mandatory
Knowledge and proficiency with a model/drawing data management tool, Windchill. A general understanding or experience with manufacturing engineering and fabrication processes. Familiarity with Microsoft Office Applications. Prior LMC employment / experience is a plus.

Active Secret Clearance or Interim Clearance
 
Job Number: 47867
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Active Secret Clearance or Interim Clearance

Strong technical background, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 47867
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/02/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Designer

Description:



Designs and develops layouts for mechanical systems. Assists in the production of detailed schematics for HVAC or plumbing and piping systems.  Typically reports to a supervisor or manager. Position requires 5-10 years of related experience. Works on projects with limited complexity in a support role. Work closely with management.  Position requires proficiency in AutoCAD and Cadworx software.


Responsible for 3D modeling, preparing 2D drawings and drafting of industrial facilities
  • Coordinate with other disciplines to develop design deliverables
  • Have understanding of AutoCAD, and CadWorx 


Qualifications


 

  • Associate's degree or 2 years of college course work would be a plus
  • MS Office skills (Word, Excel, PowerPoint) required
  • Excellent oral and written communication skills required








 
Job Number: 1910101417
Job Location: KS City, MO
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eWyQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years. An Interim Secret Clearance would be accepted****
****Looking for Candidates with Drafting skills that utilize 3D drafting software****

Job Description:
1. As a Mechanical Engineer, you will work as part of an engineering team based in Lexington, KY.
2. The team is focused primarily on modifying existing hardware and integrating modified components into various C-130 platforms based on customer specifications.
3. The primary function of this role is to design original components and assemblies as well as modify existing components, create and revise engineering drawings and documentation, and perform Design Engineering duties related to Engineering Change Notices (ECNs).
4. You will need to communicate effectively and regularly with fellow design engineers, manufacturing, documentation control, and installation crews.
5. This role includes design and drafting work as well, and as such your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
6. CATIA V5R26 and Teamcenter experience is preferred.

Education:
1. Level 1: BS+0-2 YRS
 
Job Number: 12009
Job Location: Lexington, KY
Rate: $38.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 01/14/2020
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / CREO ANSYS GD&T - NJ

Description:
167325 Job Title: Mechanical Engineer

Work Site Address: Moorestown, NJ 08057
Job Number: 2989-1
Max Pay Rate: $45.00/hr
Start Date: 1/23/2020
End Date: 12/28/2020
Position Type: Contract


Job Summary:
Seeking Mechanical Engineers to work as part of an engineering team to develop radar system hardware including phased array antennas and their subassemblies; cabinets and their subassemblies (digital processing, power conversion, receiver/exciter). Engineers will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed packaging designs and assembly strategies. Work will be performed in our Moorestown, NJ location.

• Performing mechanical design, testing, production support or design analysis
• Performing finite element analysis
• Prepare and release of engineering specifications, parts lists and drawings
• Work with component technology and configuration management personnel
• Documentation and reporting of schedule, financial and technical progress on all task

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Qualifications
• BS in Mechanical Engineering
• 2+ years of experience
• Proficiency with CAD software
• Familiarity with Pro/Engineer CREO and ANSYS Workbench
• Experience with structural, fluid mechanics and heat transfer analysis techniques
• Knowledge of manufacturing methods and metal part fabrication techniques
• Knowledge of geometric tolerancing, military standards and drafting standards.
• Experience with developing drawings and parts lists (PL’s), Enterprise Product Data Management (EPDM), change request (CR) generation.
• Experience with environmental qualification testing
• Experience designing and packaging of Commercial off the shelf (COTS) equipment in isolated cabinets for naval applications.
• Excellent verbal and written communication skills

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise 3D Models Yes 1 2 - 4 Years
Areas of Expertise Computer Aided Design (CAD) Yes 1 2 - 4 Years
Areas of Expertise Mechanical Yes 1 2 - 4 Years
Areas of Expertise Mechanical and Electrical Systems Yes 1 2 - 4 Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 1 2 - 4 Years
Technical Skills Ansys No 1 2 - 4 Years

Qty 5 positions

Position is an EXEMPT position. Candidates must have all required skills listed clearly in resume
 
Job Number: LMRMS-2989-1ATO
Job Location: Moorestown, NJ
Rate: 45/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 01/21/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 02/04/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-370
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 12/31/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-374
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 12/24/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11999
Job Location: Brunswick, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/23/2019
Last Updated: 02/07/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate:
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11978
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/18/2019
Last Updated: 02/25/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: MoJave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 01/06/2020
Last Updated: 03/11/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Microsoft Office 365/SharePoint Support Analyst

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
  1. Respond to user support requests regarding the following topics: creating and customizing SharePoint site collections, sites, lists or libraries, forms, workflows, metadata, user access and experience. Design, develop and provide training for customized solutions. Will work closely with business operations to ensure solutions answer their needs and solve their problems. Prioritize and maintain commitments and delivery dates for multiple projects and customers, simultaneously. Development and maintenance of technical design artifacts and requirements documentation.
    Communication with clients as required: keeping them informed of project progress, impending changes, and agreed upon outages. Interpret and discuss information with others and regularly provide advice and recommend actions involving complex issues. Demonstrate professional attitude with client over the phone, on-site and through emails to resolve all client requests/questions.
    US Citizenship Required.
    Must be able to work independently, strong remote worker skills. Occasional travel may be required. 
    Desired Knowledge/Skills:
  2. SharePoint 2016+, specifically custom site configuration and user support
  3. SharePoint site customization, design and delivery
  4. SharePoint Forms and Workflow; InfoPath and SharePoint Designer
  5. Troubleshooting and Issue Analysis
  6. Customer Service Focus
  7. Clear and effective communicator, verbal and written
  8. Ability to work independently and a strong desire for personal and professional development
  9. Ability to identify and evaluate trends in industry best practice policies

  • Bachelor’s degree in Computer Science or related field or equivalent.
  • Excellent communications and analytical skills
  • Demonstrated working knowledge and extensive experience in SharePoint and related software, such as InfoPath and SharePoint Designer
  • Position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
  • Position may require travel.

Position may require the ability to pass and maintain a Security Clearance.
 
Job Number: 1910107369
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMf1QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Modeling/Simulation Software/Software Development Engineer

Description:
Experience with:
• Matlab and hopefully Simulink
• Python and/or C++
• Aircraft and/or Spacecraft simulation and modeling
• Modelling of vehicle systems and subsystems (e.g. Aero, Flight Controls, Propulsion, landing gear, etc.)
• Modeling of Avionic systems (e.g. Display and display graphics, stub or physics-based Nav and other sensor models, etc.)
• Software development
• Requirements development
• Good verbal/written communication skills
 
Job Location: Fort Worth, TX
Input Date: 01/09/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Tracey Hill
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Systems Engineers : St. Louis, MO

Description:
Systems Engineer (Level 4, 5, 6)

Location: St. Louis City, MO
Duration: 1 year

Description:
• Manager is seeking a Experience Systems Engineering Lead for the U.S. Navy Aircraft Carrier Based Autonomous MQ-25 program.
• The successful candidate will be a self-starter with excellent communication skills, able to plan, design, schedule, and verify a balanced System Safety life-cycle solution. Candidates are expected to work at a dynamic fast pace while serving as the primary System Safety interface to defense industry customers, internal partners, and senior leadership teams.

Position Responsibilities:
• Candidates shall lead, coach, and develop the System Safety design team and peers for the next generation of talent.
• Lead the development and execution of a system safety program based on MIL-STD-882E. Tasks include development and continuous improvement of the Hazard Tracking System and the System Safety Working Group Charter, System Safety Management Plan, and System Safety Program Plan.
• Applies extensive knowledge of aircraft systems and sub-systems (e.g., airframes, propulsion, flight controls, fire protection, hydraulics, electrical, environmental, fuel, lighting, landing/arresting gear and brakes, avionics mission and vehicle management system, Com/NAV, support equipment and command and control systems).
• Lead in the development and execution of software Level of Rigger (LOR) task development and perform software safety analysis utilizing software criticality indices per MIL-STD-882E.
• Lead engineering meetings and program reviews, including Gate Reviews, Integrated Product Teams, Working Groups, Configuration Control and Safety Review Boards, and/or Milestone Reviews. Tasks can include safety approval or endorsement of Engineering Change Proposals, Change Notices, Notice of Escapes, Mishap Reports, and/or Requests for Deviation/Waiver.
• Lead Safety Review Board flight determinations for Notice of Escapes, fleet impact assessments, line stock checks, and other non-conformances.
• Assess system risks to personnel, equipment or environment. Tasks include Preliminary Hazard List, Preliminary Hazard Analysis, System Requirements Hazard Analysis, Subsystem Hazard Analysis, System Hazard Analysis, Operational and Support Hazard Analysis, Health Hazard Analysis, Functional Hazard Analysis, and Fault Tree Analysis.
• Evaluates customer/operational needs to define system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces.
• Leads, develops, maintains and identifies improvements in the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessments.
• Candidates should be familiar with Earned Value Management (EVM) metrics to achieve life-cycle cost and performance expectations that satisfy contractual requirements and Boeing first time quality obligations.
• Candidates must collaborate one on one, and in group settings such as sub-system engineering design teams, sub-tier supplier coordination events, and be comfortable presenting before executive leadership teams.

Qualifications (Desired Skills & Experience):
• 5 years or more of experience implementing Department of Defense system safety standards MIL STD 882E
• Experience leading or managing projects and/or teams
• Master's degree and course work in statistics/safety engineering
• Bachelor's, Master's or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
• Military experience

Typical Education/Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+8 years' related work experience, Master+8 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code:
6AL-Systems Safety
 
Job Location: St Louis, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 12/20/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Test Engineer

Description:
Test & Evaluation Engineer 3

Location: New Orleans, LA
Duration: 6 Months

Job Description:
Engineer will participate in leak testing of production and fluid systems on the SLS core stage. This includes updating test procedures, test setup, test conduct, test tear down, and paperwork closure. Included in this effort includes components on all major components of the rocket as well as multiple integration points. Leak testing will consists of detection using bubble soap and mass helium spectrometers.
Candidate must have the specific Leak Testing (LT) certification per ANSI/ASNT CP-105, Standard Topical Outlines for Qualification of Nondestructive Testing Personnel, , Level I, II, or III. Leak test methods include Bubble testing, Pressure Change, and Mass Spectrometer Testing. In the event that an ASNT certification is not held by the candidate, the candidate shall meet the training, practical experience, and examination criteria for certification per ASNT Recommended Practice No. SNT-TC-1A.

Education / Experience:
Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.
 
Job Location: New Orleans, LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 10/17/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Niche - Senior Wordpress Developer

Description:
PDS Tech is seeking a NIche - Senior Wordpress Debeloper in Lewisville, TX, for a 3-month contract with potential to go permanent.


•             Create and maintain web content in Client WordPress instances in collaboration with stakeholders and teammates
•             Manage and maintain WordPress platform and plugins
•             Be ready to think through problems, help fix them, mentor and support others, think outside the box and ask questions.

Now, more specifically you would:
•             Lead the development of WordPress sites collaborating with both domestic and offshore development teams.
•             Develop responsive, standards-compliant HTML and CSS3 themes for WordPress
•             Install, test, and debug WordPress plugins and develop new plugins as needed
•             Evaluate designs for potential development issues and flag problems appropriately
•             Conduct cross-browser and cross-device testing
•             Prototype functionality for Legal and executive review
•             Take ownership of initial code quality including unit testing
•             Provide technical support to internal customers
•             Be responsible for the health and maintainability of our codebase
•             Monitor and maintain/enhance the ongoing performance of associated systems
•             Other duties as assigned

 
•             Graduation from a 4-year college or university with a degree in computer science or related field (equivalent work experience may be considered.)
•             5 years of professional experience as a software developer / programmer analyst with background in the skills below.
o             Object Oriented Programming
o             Software design patterns
o             JavaScript
o             React
o             Redux
o             GraphQL
o             MYSQL
o             PHP
o             Ecmascript 6
o             CSS3
o             HTML5
o             REST Services
o             GIT Version Control
o             Command Line $BASH etc.
o             Web server technology - Apache, NGINX or similar
o             Experience with Document Object Model (DOM) and Regex helpful

You’re a great fit if you have these skills:
•             Expert PHP development
•             Expert HTML & CSS skills with full understanding of web standards and responsive design techniques
•             Understanding of jQuery and other JavaScript libraries
•             Experience with WP-CLI tool
•             Basic understanding of accessibility best practices, Section 508 compliance and/or WCAG 2.0 standards
•             Experience with Scrum and Agile Methodology
•             Ability to estimate time and level of effort for front-end development tasks
•             Excellent communication skills, attention to detail and ability to work in a fast-paced, collaborative team environment
•             Detail oriented, well organized, able to thrive in deadline driven environment while working on a number of projects simultaneously and independently
•             Excellent written and oral communication skills
•             Experience with consumer-facing web sites
•             Experience with Chrome debugger and development tools
•             Grow expertise by proactively staying current with digital media and technologies
 
 
Job Number: 1910105115
Job Location: Lewisville, TX
Duration: 3 months
Input Date: 01/13/2020
Last Updated: 03/27/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062