Job Search Results

195 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/11 Tuesday 11:11PM Pacific Time by ContractJobHunter. )

Listings 1 - 195

Go To My Job Tracker

Expand all descriptions

6 Structural Design Engineers

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 1-year+
Start Date: October
Input Date: 11/21/2018
Last Updated: 12/11/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tooling Design Engineers III

Description:
STS Technical Services is now Hiring Aerospace Tooling Design Engineers III in Savannah, Georgia!

Position Summary:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Essential Duties & Responsibilities:
Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft
Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures
Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers
Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures
Write complex procedures on use of tools
May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives
Additional Functions:
Actively works to improve daily processes, and ensures all work meets customer requirements
Assist Tool shop as needed, during Periodic and Conformity Inspections
Assist in formulating Tool Design policies, procedures, and specifications as required
Perform other duties as assigned

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering (a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job)
Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment
Tool Design experience required

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44493
Job Location: Savannah, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Assistant Structural Detailer

Description:







  • The Assistant Structural Detailer will  plan and prepare non-routine drawings with complex features using information from rough sketches, detailed engineering notes or brief verbal guidance.  Develop detailed layouts and details using acquired knowledge of fundamental concepts and practices pertaining to the structural discipline.  Responsibile for the set-up of discipline specific drawings at project start-up.  This position successfully follows company and client drafting standards and procedures. Other duties as assigned.
  • Requirements:
  • Ideal candidate will have 2-5 years experience with structural modelling and detailing experience in REVIT.  
  • Associate's or Bachelor's degree in drafting technology.  Minimum of 5 years previous drafting experience.  Related consulting experience preferred. Strong analytical and problem solving skills.  Excellent written & verbal communication skills. Demonstrated ability to work as an effective team member.  Proficient in at least one type of CAD system and capable of working in other software packages when necessary.  Routinely uses higher-level commands, timesaving programs and routines.









 
Job Number: 1810090905
Job Location: Chesterfield, MO
Duration: 6 months
Input Date: 08/23/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002expkAAA&URLSource=cjhunter

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 12/11/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

CAD Designer
(US Citizenship Required*)
Marion, VA
2018-7214

Responsibilities:
• 3D design and modeling of mechanical hardware
• Applying 3D dimensions and text to 3D models using the FT&A module
o (3D-Model Based Definition)
• Generating 3D-PDF files using Anark software (training provided)

Qualifications:
• Strong mechanical design background
• Proficient in the Catia V5, Part Design, Assembly Design, Generative Shape Design, and Functional Tolerancing & Annotation modules
• Proficient in GD&T
• ASME Y14.100 Engineering Drawing Practices
• ASME Y14.5 Dimensioning and Tolerancing
• ASME Y14.41 Digital Product Definition Data Practices
Preferred:
• Windchill PDM System
• Mechanical Engineering Degree
• Experience in the manufacture of mechanical assemblies
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree or equivalent is required plus a minimum of 5 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7214
Job Location: Marion, VA
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

CAD Drafter / Designer

Description:

PDS Tech, Inc. is seeking a CAD Drafter / Designer for an open position in Jacksonville, FL. 
The ideal candidate will perform mid to high level complexity drafting and design of Assembly level CAD Drawings


Must be proficient with SolidWorks CAD software including:
  • 3D modeling
  • Creation of Drawings
  • Geometric Dimensioning & Tolerancing.

Education Associates Degree
 
 
Job Number: 1810085016
Job Location: Jacksonville, FL
Per Diem: No
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mOFxAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Operator

Description:
Must be proficient in AutoCAD (version 2014 or higher). Must be proficient using Windows based software and MS office 2000 or higher (Excel, Word, PowerPoint, etc.). Must have strong organizational skills. Someone with a little bit of experience in the construction field



PREFERRED.


  • More along with electrical or mechanical construction, not electronic board layouts.

  • Willing to look at candidates recently graduated from school but has some business experience as a CAD person.

  • High school or equivalent education required.

  • Resumes need to be well constructed, accurate, spell checked, etc. which shows attention to detail with the desire to do a good job. It shows that the candidates care about what they put their name on.

  • Receive project assignments from Design Team member.

  • Under supervision, prepare construction drawings required to support the installation of electronic special systems (fire alarm, security, access control, and other low voltage specialty systems)

  • Electronic systems drawings will typically consist of items such as floor plan layouts, riser diagrams, electrical interconnections drawings and installation terminations.

  • ¿Prepare submittal documentation (i.e.,. data sheets, battery calculations) Maintain project drawing files, and associated records and documentation tracking & maintaining as-built drawings Perform other duties as assigned.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 18-43362
Job Location: Irving, TX
Rate: 22.46USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-05 00:00:00.0
Start Date: 2018-06-25 00:00:00.0
Input Date: 10/11/2018
Last Updated: 11/29/2018
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer needed for a contract opportunity with Yoh’s client located in Huntsville, AL.

What You’ll Be Doing:

The Engineer will have the responsibility of working with and leading activities within the Inorganic Surface Treatments and Finishes team for Boeing Research and Technology (BR&T) Materials and Manufacturing Technology (MMT) Chemical Technology team.
Though the physical position is in Huntsville AL, the engineer will be responsible for activities globally, including performing on the Internal Research and Design (IRAD) portfolio from New Business Funds (NBF) for alternative electro-plating and electro-less plating relation to the Next generation Hex Chrome replacement finishes, Cadmium replacement finishes, and the use of more environmentally safe chemicals (e.g.. alternatives to the use of Boric Acid, Hydro Fluoric acid) in the finishing processes.
This will involve oversite, technical coordination with BR&T India, and possibly BR&T China, and Global suppliers.
This requires an in-depth knowledge in the science of electro-finishing and hands-on applications in industry (large tanks) and small tank research.
The effort will include technical coordination with strategic stakeholders and partners for developing alternative metal surface finish chemistries and finishing processes, leveraging and coordinating with industry & other Sr. Finishing experts within Boeing.
The Engineer will support Boeing Commercial Airlines (BCA) Product Development (PD) alternatives and BCA and Boeing Defense and Space Systems (BDS) emergent manufacturing issue resolution activities.
Most of the work is supported through the operation, maintenance, and retrofitting of a current finishing line in Huntsville AL made up of 32 - 100 gallon tanks, covering several of Boeing standards (plating, anodizing, conversion coating, deoxidizer, etchants, etc.) and for new chemistries, as well as a small Barrel Plating line of 20 gallon tanks.
The Engineer will be a key participant in the future vision for alternative products, the forecasting and planning of the work to justify future funding, including cooperative funding (CRAD – Contract Research and Development and CRADA – Cooperative Research and Development Agreement). This will include working with Principal Investigators (Boeing Research Engineers) to establish the needed budget for current and future years, the resource and schedule planning for achieving the goals, working with internal Boeing stakeholders (e.g. the BCA programs such as 737, 777, 787, Defense platforms) and external stakeholders (NAVAIR, Army Research Lab, Navy Research Lab, NASA, Small business strategic partners) for the deliverables and commitment dates, as well as the potential transition of new technology such as Technical Readiness/Manufacturing Readiness Level 6 to pre-Product Development and then to Manufacturing.


What You Need to Bring to the Table:

Bachelor of Science Degree in Chemistry, Materials Science or Chemical Engineering with a minimum of 10 years industry experience OR and preferred a PHD Chemistry, Materials Science or Chemical Engineering with a minimum of 7 years’ experience in inorganic surface treatments and electro-finishing and electroless finishing technology
Bonus Points! Otherwise Known As Preferred Qualifications:

Electro Finishing and some electro-less finishing, with hands on experience of Industry surface finishing processing (7 years minimum) with the stand up of a new process, the surface finishing science, and the scale-up of a lab research line to a large tank line, the process control and maintenance of a tank line, standard testing (e.g. ASTM, SAE, and BACs are a significant plus..) for inorganic coating finishes, and experience in introducing new chemistry for consideration and to obtain qualification for that new product.


Opportunity is Calling, Apply Now!
Recruiter: Jarvis Buchanan 817-707-6645

Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here!
 
Job Location: Huntsville, AL
Rate: 70 HR
Per Diem: NO
Overtime: Possible
Duration: 6 Months
Start Date: ASAP
Input Date: 10/30/2018
Firm Name: YOH SERVICES
Attention: JARVIS BUCHANAN
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

Circuit Board Designer - Cadence Allegro (320)

Description:
*This is a full time, 1 year contract position, located in Hudson, NH*



We are looking for an Electronic Designer that has the ability to create 5+ layer layouts of printed electronic circuit boards using Cadence Allegro and Cadence Concept.



Candidate will create complete deliverable fabrication package and fabricate both the bare board and assembly, enter design rules into Cadence constraint manager, prepare layouts using IPC-2221, modify and create new to schematic diagrams with Schematic Capture, Cadence Concept HDL5, working with ECOs and Oracle PDM tools to direct draftspeople to make changes into drawings.



Required:
*15+ years’ experience in Printed Circuit Board layout, most of which, using Cadence Allegro 17.2 (16.6 may also be acceptable)
*Good knowledge of Cadence Constraint Manager and Concept HDL 5.
*Familiar with IAW IPC-2221 standards, ECOs, BOMs, and PDM tools
*Knowledge of Signal Integrity and Designs
*AS degree in engineering technology, drafting or equivalent.
Pluses:
*BSEE or BSME
 
Job Number: 320
Job Location: Hudson, NH
Input Date: 12/03/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Configuration Manager (CM) / Drawing Support (130)

Description:
*This is a 3-6 month CONTRACT to HIRE position located in Baltimore*



We are looking for a documents and drawings Configuration/Data Management (DM or CM) person who will help with the CM/DM plans to release software code/ CAD models and other data into the PDM. Applicant will also maintain drawing library/part data, BOMs and drawing changes and manage the logs of all data.



The contractor will develop the CM plan, manage the changes, conduct training, generate reports from the PDM, lead the Configuration Control Boards (CCB) and handle meeting records. Candidate will be supporting the delivery, maintenance and any audits (PCAs) of the of the Technical Data Package (TDP) as well as supporting of the ISO, CMMI, Defense Contract Management Agency (DCMA), Quality and corporate audits. Support CDRL deliveries.



Required:
*8 years’ experience in Configuration Management/ Data Management leadership
*Able to read blueprints, drawings, ECO’s, EBOMs; good report writing, including proposals
*Enovia skills and good MRP/ERP experience (Made2Manage, preferred)
*Able to make customer presentations
*2 year degree



Pluses:
*Unipoint experience
*Familiar with drawing and CAD applications
*Knowledge of Design engineering standards and processes, and Configuration Management (CM) for MIL STD such as MIL-HDBK-61A, MIL-STD-31000 Industry standards including: EIA-649B, ISO 10007, CMMI Drawing standards including ASME standards such as MIL-STD-100.
*Training in Configuration Data Management (CDM). NDIA Configuration Data Management (CDM) certification
 
Job Number: 130
Job Location: Baltimore, MD
Input Date: 12/03/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Data Analyst IV

Description:
PDS TECH INC. is seeking candidate for Data Analyst position located in Menlo Park, CA

Responsibilities



  • Be a leading authority on survey tooling, design, methodology, and analysis: work with partners to design surveys that are statistically sound and built to appropriately measure desired constructs. Use expertise in survey research to figure out the right audiences, sampling strategies, triggering events, and cadence
  • Analyze survey data to identify trends, conduct root cause analysis, and find opportunities to improve Building 8 products
  • Work with stakeholders to make recommendations and build action plans based on findings
  • Prepare documents and materials for leadership meetings, reviewing results and presenting strategic product recommendations




 
  • 5+ years of data analytics in consumer devices or equivalent experience in user research and survey design and analytics
  • Experience in survey design, analytics, and action planning
  • Program and project management expertise
  • Experience with different survey tools (e.g., Qualtrics, SurveyMonkey)
  • Advanced skills with Microsoft Excel manipulating very large datasets is required
  • Comfort with ambiguity, uncertainty, and a dynamic program landscape
  • Willingness to shift from high-level critical thinking to stepping in and helping to drive implementation alongside functional teams
  • BA/BS preferably in Psychology, Marketing Research, Behavioral Economics, Social Sciences (e.g., Anthropology, Sociology), Data Science, Mathematics or similar field
  • Masters or PhD in relevant field preferred


 
 
Job Number: 1810089038
Job Location: Menlo Park, CA
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Alec Merriman
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mecDAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers III

Description:
STS Technical Services is Hiring Design Engineers III in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

The Design Analyst is responsible for the engineering, designing, and drafting of tools, gages, lifting devices, work platforms, tail docks, and fall restraint systems to support maintenance on our ground support equipment, aircraft fleets, components, and engine types throughout company operations.

The Design Analyst must have experience in custom design of machinery, tools and prototypes that ensure full adherence to all safety and compliance regulations and standards.

Job Duties & Requirements:

A broad scope of CAD design capabilities are required including:

The generation of 3-D solid models using Autodesk Inventor or Solidworks
These models are utilized for functions including but not limited to Finite Element Analysis, CNC tool paths, 3-D printing and 2-D manufacturing drawings
Additionally, creative problem solving skills are required and are used to resolve complex repair problems in which a solution is undefined
The Design Analyst is a technical representative of company Tooling Services
A qualified applicant must be able to professionally interact with vendors, engineering firms, fabrication and machine shops, and departmental personnel throughout the company
The Design Analyst must have both Mechanical and Structural skills
The Mechanical element includes the designing of jigs, fixtures and gagging
These tools are designed using manufacturer’s part prints, overhaul manual criteria, authorized repair documents, AD Notes and any other applicable information important to the function of the tool
The Structural element includes the design and analysis of maintenance work stands, tail docks and lifting/handling devices
All structural designs must adhere to all applicable standards such as those set forth by AISC (American Institute of Steel Construction), ANSI (American National Standards Institute), AWS D1.1 (Structural Welding Code) and Delta’s SPM (Safety Policy Manual)
The Design Analyst is also responsible for the review and implementation of OEM tool change bulletins

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44601
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/08/2018
Last Updated: 11/15/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Designer

Description:
CAD, CAM, or CATIA, strong 3D modeling
 
Job Number: 42806
Job Location: Virginia
Input Date: 10/29/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Email: glenburnie@apollopros.com
Website: www.apollopros.com

Designer / Drafter

Description:
PDS Tech, Inc. is seeking a Designer/Drafter for an open position in Santa Fe Springs, CA
 
Responsibilities for this position include:
  • Developing and maintaining all Facility drawing packages.
  • Developing and maintaining system and sub-system drawing packages.
  • Developing and maintaining engineering manufacturing drawings associated with site.
  • Incorporating redlines into existing drawings in multiple CAD systems.
  • Working with minimal supervision after initial orientation.
  • Creating and revising site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
  • Completing new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
  • Determining scaling; inserts, necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; preparing complete production detail drawings.
  • Contributing design modifications to improve quality of product or facilitate manufacturing operations.

Qualifications
  • High School Diploma with a minimum of 3 years Design/Drafting experience / Associates Degree with a minimum of 5 years Design/Drafting experience (preferred)
  • 2 – 5 years’ experience in Design/Drafting using Inventor 2015 version or higher
  • 2 – 5 years’ experience in Design/Drafting using Autocad 2015 version or higher
  • Full understanding of GD&T, version ASME Y14.5M-1994.
  • Experience with CADKEY 1999
  • Experience with NX 8.5.3 or higher
  • Experience with TeamCenter PLM system
  • Familiar with basic parametric modeling
  • Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)

 
Job Number: 1810087495
Job Location: Santa Fe Springs, CA
Per Diem: No
Duration: 12 months
Input Date: 06/11/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mXvIAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Designer with Naval Architecture experience needed to design components or portions of systems, modify existing designs for process improvements and to facilitate manufacturing operations.
Ideally this Designer/ Drafter will have advanced knowledge and use of CAD, CAM or CATIA graphic tools, and be able to confidently work with and present design proposals to project teams. Duties include coordinating design criteria with engineering, manufacturing, tooling, material and planning group such as ease of manufacture, availability of materials, and contractual specifications.
Desired Qualifications:
AS or 2 year Technical degree in Design / Drafting or related discipline
6 years Design/ Draft experience with primary experience in Design
Advanced proficiency in AutoCAD
Prior Naval Architecture experience
Full understanding and working knowledge of Nav Arc/Structural/Foundation/Outfitting & Furnishings; and how all engineering functions interface
Location: Pascagoula, MS
Pay range: DOE $48.00-58.00/hr
Term: 1 year or indefinite
 
Job Number: DD5NH1
Job Location: Pascagoula, MS
Rate: 58.00
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: 11/15/18
Input Date: 11/05/2018
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Kaitlyn
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 985/872-5530
Website: www.nationwideskilledtrades.com

Designer 3 - VA - C

Description:


RESPONSIBILITIES:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
Leveling Factors:
Knowledge: Full Considerable knowledge of the job. Complete acquaintance with and understanding of the general and detailed aspects of the job, and their practical applications to problems and situations ordinarily encountered.
Supervision Given and Received: Limited supervision. No instructions needed on routine work, and general instructions given on new lines of work or special assignments.
Typical Duties and Tasks: Duties & tasks are varied and moderately complex. Resolves most questions and problems, and refers complex questions to higher levels.
Consequence of Errors: Errors may be difficult to detect and would normally result in loss of customer business, material, or equipment to resolve.
Contacts: Contacts are frequent with individuals representing other departments, and/or representing outside organizations. Contacts involve obtaining or providing information or data on matters of moderate importance to the function of the department or which may be of sensitive nature.
This position requires the ability to physically access a wide variety of work sites, including those aboard ships under various stages of construction or overhaul, including the use of vertical and inclined ladders, and may involve limited kneeling, stooping, standing, etc.

REQUIRED EXPERIENCE:
Associate's or other 2 year technical degree in related discipline and 3 years of related experience.
This position requires experience with the design, repair, and manufacture of shipboard piping systems. Proficiency with the development of manufacturing and installation drawings utilizing AutoCAD is necessary.
Experience with 3D arrangement design is desired.

EDUCATION:
Associate's or other 2 year technical degree in related discipline is required. Candidates with ABET accredited Bachelor's degree will not be considered.

HOURS:
7:30AM to 4PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174656
Job Location: Newport News, VA
Rate: $26.43 to $34.76 DOE
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Designer 3 - VA - C

Description:


RESPONSIBILITIES:
This position is to support of the development and checking of 3D Digital data for the piping systems.
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
Leveling Factors:
Knowledge: Full Considerable knowledge of the job. Complete acquaintance with and understanding of the general and detailed aspects of the job, and their practical applications to problems and situations ordinarily encountered.
Supervision Given and Received: Limited supervision. No instructions needed on routine work, and general instructions given on new lines of work or special assignments.
Typical Duties and Tasks: Duties & tasks are varied and moderately complex. Resolves most questions and problems, and refers complex questions to higher levels.
Consequence of Errors: Errors may be difficult to detect and would normally result in loss of customer business, material, or equipment to resolve.
Contacts: Contacts are frequent with individuals representing other departments, and/or representing outside organizations. Contacts involve obtaining or providing information or data on matters of moderate importance to the function of the department or which may be of sensitive nature.

REQUIRED EXPERIENCE:
Associate's or other 2 year technical degree in related discipline and 3 years of related experience.
Candidate submitted must have prior experience in the following: 3D Spatial Modeling, Piping and Product Model Information (PMI).

EDUCATION:
Associate's or other 2 year technical degree in related discipline is required.
Candidates with ABET accredited Bachelor's degree will not be considered.

HOURS:
7:30AM to 4:00PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 173436
Job Location: Newport News, VA
Rate: $26.43 to $34.76 DOE
Duration: 1-12 months
Input Date: 08/23/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 12/11/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Dispatcher - (3) - AZ

Description:
Chipton-Ross is seeking 3 Fire Protection Oper Specialist B's located in Mesa, AZ

RESPONSIBILITIES:
DISPATCHER ROLE
The Dispatch candidate will be responsible for monitoring, receiving and dispatching calls for Security and Fire emergency and non-emergency services in accordance to established guidelines. Must maintain radio contact with those entities. Will be responsible for collecting pertinent information and quickly and accurately typing that information into the Computer Aided Dispatch (CAD) system. The dispatcher will relay information in a timely manner to responding units. The dispatcher will be responsible for effectively monitoring multiple radio frequencies simultaneously. Must have the ability to multi-task.

The dispatcher candidate will be responsible to answer emergency phones. The candidate will be Emergency Medical Dispatch (EMD) Certified and in good standing. (EMD training is provided in-house.) Will be responsible for providing approved Pre-Arrival Instructions according to policies and procedures. Candidate will be responsible for making required and requested notifications. The dispatcher candidate will be professional and courteous with all customer interactions in person, on the telephone and on the radio.

The dispatcher candidate must be responsible for their own emotions and not allowing those emotions to interfere in sound decision making, especially during emergency events. Must be reliable and take personal pride in the work performed. Must maintain a positive attitude under stressful situations.
Must have the ability to perform in a team environment.

The candidate will be responsible for the successful operations of all CAD, telephone, alarm monitoring systems, radio, paging systems, weather alert systems and any other communications equipment found in the center.

The dispatch center operates 24X7X365 and the dispatch candidate must be willing to work shift work, nights, weekends and holidays. Must have experience with Microsoft Office Suite. Must have keyboarding skills at a minimum of 35 WPM. Public Safety Answering Point (PSAP) experience preferred.

EDUCATION:
Accredited High School Diploma/GED and typically 1 or more years' related experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
5 AM - 1:30 PM

Candidate must be willing to work shift work, nights, weekends and holidays.

 
Job Number: 174534
Job Location: Mesa, AZ
Rate: $DOE
Duration: 12 MONTHS
Input Date: 10/15/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Chelsie Goodreau
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cgoodreau@chiptonross.com
Website: www.chiptonross.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Analog Design Engineer
 
Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools. 
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of manufacturing tooling and test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 
  • Support kaizen-related process improvement activities.

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus. 
  • Minimum of five years of experience in design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations. 
  • Experience with EMI/EMC compliance. 
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics a plus. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in Analog Simulation, preferably with Cadence PSPICE. 
  • Strong Analog background with High Power, High Voltage experience a plus. 
  • Experience performing Stress Analysis and Thermal Analysis.
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 




 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Seeking an Electrical Engineer. The selected individual will support multiple aspects of the project including:
• Design and build of electronics hardware and circuits for power, control, and diagnostic systems associated with experimental plasma physics hardware and
• Design and interface with facility engineering team on the design and build of specialized lab facilities and their interface with experimental plasma physics hardware. Tasking significantly involves high voltage/power systems with stringent emission requirements. Tasking includes circuit/PCB design, electrical power system and distribution design, energy storage system design, electrical wiring and controls design, and support to EMI/shielding analysis and design.

• Will work with other engineers and physicists on daily basis on this tasking in office and lab environment (hands on build and test of hardware is required).
• Will write and conduct component installation, checkout, and troubleshooting procedures.
• Will support laboratory operations and testing.
• Must be able to wear radiation sensor in laboratory environment.

Basic Qualifications:
• Bachelor’s degree OR above in electrical engineering or related field.
• Experience with electrical system hardware (laboratory or other environment).
• Experience in electrical system definition.
• Experience creating electrical schematics.

Desired skills:
• Experience with High Voltage electrical power architectures and system hardware (generation, distribution, storage).
• Experience with facility electrical and grounding design and hardware interface.
• Experience with electrical system shielding and noise reduction.
• Experience with schematic capture and PCB design using Eagle and Altium.
• Experience with PCB fabrication and test.
• Experience with connector selection and cable harness fabrication.
• Experience trouble shooting electrical systems.
• Experience in laboratory environment (high vacuum plasma physics preferred).
• Experience with laboratory diagnostic test equipment, DAQ, and PLC systems.
• Experience with Matlab and Labview software packages.
• Experience with 3D CAD tools - CATIA V5.
• Experience with PSpice and Simulink circuit design and analysis tools.
• Experience with MS Office software tools.
• Good oral and written communication skills.

The Structures Company is an AA/EOE.
 
Job Number: 249
Job Location: CA
Rate: OPEN - ***DOE***
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 12/03/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical Engineer (Level 2) - SC - OM

Description:
Chipton-Ross is seeking an Electrical Engineer - Level 2 located in Greenville, SC

RESPONSIBILITIES:
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies in CADAM for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
Experience with aircraft architectures and electrical integration of avionics subsystems is Required.
Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installation.
Must be experienced with CADAM design software for electrical design.

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design is Required.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 174989
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 11/07/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer (Software Development) - (Renton)

Description:
Required qualifications:
• Electrical Engineering experience with an emphasis in software development
• Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
• Experience with hardware and software configuration management
• Familiarity with and the ability to program with Visual Basic and C#
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Preferred qualifications:
• Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
• Ability to create and update drawings with Auto Cad and/or Autodesk inventor
• Experience with digital data busses such as ARINC 429/717.
• Experience with aviation connector interfaces and packing such as ARINC 600.
• Knowledge of web design and maintenance
• Experience programming PLCs and HMIs
• Experience with National instruments Lab Windows CVI.
• Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
• Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors
Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EERenton
Job Location: Renton, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 12/11/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer III

Description:
We are seeking an Electro-Mechanical Engineer in Texas! Read below for more information on this position and submit your resume if you qualify!

The ideal candidate for this position will perform the following tasks:
* Responsible for missile harness design and 3D routing and general packaging support.
* Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. Research, development and design of components, equipment and networks for military applications.
* Responsible for interfacing with electrical engineers in interpreting system interconnect diagram(s), harness schematics, and providing guidance for improving the layout based on best physical routing practices.
* Responsible for harness piece-part/component selection to meet interfacing hardware and environmental requirements.

Mandatory Qualifications and Experience:
* Requires 5 or more years of electro-mechanical design experience of airborne avionics, missile and/or ground-based equipment.
* Design experience should include electrical cable and/or network design and general electro-mechanical design.
* Must have experience with cabling/harness design.
* Must be proficient with the Pro/Cable module in Creo, have good communication skills, and be able to work with internal and external customers.
* The ability to work with minimal oversight.

Desired Qualifications and Experience:
* Knowledge of company procedures in CAD modeling
* Working knowledge of military and/or industry hardware specifications

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129195
Job Location: gr, TX
Duration: 11 mos
Start Date: 11/26/2018
Input Date: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 1

Description:
Electrophysics Engr/Scien 1
 
Location: Huntsville, AL
Duration: 6 months
 
Description:
Assists in developing and documenting requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Performs basic analysis to predict component performance to established requirements. Conducts simple tests to validate performance of designs to requirements. Collects data on supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle. Supports project management by gathering project status data. Gathers information to support development of sections of proposals to support development of new business. Works under close supervision.
 
Preferred skills for the Lab Tech:
- Knowledge of Electronics
- Knowledge of PCB Manufacturing
- Knowledge of Soldering
- Knowledge of Additive Manufacturing
- Experience with CAD/CAM
- Knowledge of Electronics Packaging
 
Optional Skills:
- Knowledge of conductive inks
- Knowledge of polymer processes
 
Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Skill Code:
64Z-Radio Frequency Microwave.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-16333
Job Location: Huntsville,, AL
Per Diem: Available
Input Date: 10/22/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

Eng Sr - Quality

Description:
PDS TECH Inc. is seeking Eng Sr - Quality located in Louisville,KY.


Description:
  • 1st Shift Quality Analyst/Inspector in our Louisville KY location:
  • Develops quality plans, quality assurance procedures, work instruction.
  • Performs layout work on applicable measurement equipment.
  • Reads and interprets customer drawings and specifications and identify appropriate inspection methods.
  • Interprets geometric dimensioning and tolerancing specifications.
  • Performs 1st piece, last piece, and inprocess inspection checks.
  • Evaluates nonconforming material to determine final disposition. Provides support to Manufacturing Engineering and other business units.
  • May direct the work of less senior personnel. Maintains a safe work environment and ensures compliance with safety objectives and policies.
  • Ability to exercise discretion and independent judgment. Ability to communicate effectively both orally and in writing
  • Ability to use computers to prepare appropriate reports and documents




S
Experience with FARO and Leica Laser Tracker. Experience with offline programming using PCDMIS CAD or Spatial Analyzer software. Experience operating a global CMM and Leica Laser Tracker. 
Skills PreferredExperience with FARO and Leica Laser Tracker. Experience with offline programming using PCDMIS CAD or Spatial Analyzer software. Experience operating a global CMM and Leica Laser Tracker. 
Experience RequiredBachelor's Degree and 5 years work experience or equivalent experience Required education: High School/GED plus 11 years of relevant 
Experience PreferredBachelor's Degree and 5 years work experience or equivalent experience Required Skills and Education: Required education: High School/GED plus 11 years of relevant 
Education RequiredBachelor's Degree and 5 years work experience or equivalent experience Required Skills and Education: Required education: High School/GED plus 11 years of relevant 
Education PreferredBachelor's Degree and 5 years work experience or equivalent experience Required Skills and Education: Required education: High School/GED plus 11 years of relevant

 
Job Number: 1710079402
Job Location: Louisville, KY
Duration: 3 months
Input Date: 09/07/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jonas Lindner
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023bz4AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III / CAD / Proficiency with RTCA/DO-178B development and verification / expert-level fluency in ANSI C and assembly / expertise with low-level software including device drivers, interrupt service routines CA

Description:
Engineer III

Work Site Address: Irvine, CA 92618
Job Number: 5962
Max Pay Rate: 60-65/hr max
12 months

2 openings

Roles and Responsibilities

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

Qualifications and Education Requirements
· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
· Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.
· Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.
· Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.
· Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


Preferred Skills
Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.
 
Job Number: JK-5962
Job Location: Irvine, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 12 months
Input Date: 12/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Tool - 4- Secret Clearance

Description:
PDS TECH INC.  is seeking Engineer Tool - 4 located in El Segundo,CA.

Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
  • Must have production assembly tooling and design background with demonstrated knowledge depth of the processes and standards used in the aerospace industry for this.
  • Must be capable of performing tool design development utilizing CATIA V5 or NX 8.5 or above
  • Ability to work within a Production Engineering team and assuming roles for tool planning and technical execution is highly desirable-must be flexible for work content and role.  Should be comfortable with creating briefing materials and presenting data in team settings for critical design reviews and other high visibility discussions.
  • Applicant should be familiar with all current GD&T and best practices for delivering and managing tool design data.

 
Basic Qualifications:
  • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.   Job related experience will be considered in lieu of educational certifications: a minimum of 8 years of experience as a level 4 tool design engineer for aircraft and aerospace structures is required.
  • Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).


Preferred Qualifications:



  • Stress Analysis competency
  • Aircraft production assembly line tool design experience for large, high complexity assembly processes, including handling and lifting fixture design experience.
  • Lofting/surfacing skills in the CAD systems noted

 
Job Number: 1810085237
Job Location: El Segundo, CA
Duration: 0 months
Input Date: 07/17/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPa6AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Renton, WA
Duration: 6 months

Description:
Required qualifications:
- Electrical Engineering experience with an emphasis in software development
- Experience working with two or more of the following: web application development, mobile application development, object-oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
- Experience with hardware and software configuration management
- Familiarity with and the ability to program with Visual Basic and C#

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
- Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
- Ability to create and update drawings with Auto Cad and/or Autodesk inventor
- Experience with digital data busses such as ARINC 429/717.
- Experience with aviation connector interfaces and packing such as ARINC 600.
- Knowledge of web design and maintenance
- Experience programming PLCs and HMIs
- Experience with National instruments Lab Windows CVI.
- Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
- Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors

Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Skill Code:
66U-Designer Engineer.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-17824
Job Location: Renton,, WA
Per Diem: Available
Input Date: 10/23/2018
Last Updated: 11/01/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Equipment & Tool Engineer 3 (4) - WA

Description:
Chipton-Ross is seeking 4 Equipment & Tool Engineer 3's located in Renton, WA.

RESPONSIBILITIES/REQUIRED EXPERIENCE:
Electrical Engineering experience with an emphasis in software development
Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
Experience with hardware and software configuration management
Familiarity with and the ability to program with Visual Basic and C#.

PREFERRED EXPERIENCE:
Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
Ability to create and update drawings with Auto Cad and/or Autodesk inventor
Experience with digital data busses such as ARINC 429/717.
Experience with aviation connector interfaces and packing such as ARINC 600.
Knowledge of web design and maintenance
Experience programming PLCs and HMIs
Experience with National instruments Lab Windows CVI.
Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:30 AM - 3:00 AM

 
Job Number: 174675
Job Location: Renton, WA
Rate: $DOE
Duration: 6 Months
Input Date: 10/22/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.
 
Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

Full Time Mid-Level Design Engineer - Composites

Description:
Design Engineer Composites
Location: West Lafayette, IN
Direct, full time position


Job Description:

Seeking Design Engineers to perform mechanical design and drafting tasks including composite part design. Qualifications include:
•Experience with surfacing, solid modeling, and drafting
•CAD Software: CATIA V5
•Primary / Secondary Structural Design experience including sheet metal, machined and composite parts
•Experience using Composites workbench (CPD) for CATIA V5
•Composite Tooling (molds, trim tools) design preferred
•Experience with GD&T preferred
•Aerospace experience preferred




Min years of experience: preferred 3 yrs minimum including experience with composites design

Degree Requirements: BS in Engineering or Engineering Technology




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55310
Job Location: IN, AL, CT
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/05/2018
Last Updated: 12/07/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MIL Harness Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

MIL Harness Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7209

Responsibilities:
• As Electrical Wiring Harness Design Engineer, design electrical wiring harnesses including component selection for connectors, backshells, sleeving, braiding, sealants, boots, transitions, etc.
• Determine harness layout through vehicle, branch points for multi-branch harnesses
• Design to environmental requirements for temperature, shock, vibration, submergence, exposure to harsh chemicals
• Design harnesses for MIL ground vehicle environment highly desired
• Design in Mentor Capital software highly desired
• Work with CAD draftsman to route harnesses in 3D CAD tools (Pro-E and/or NX)
• Work with CAD draftsman to develop released drawings for harnesses, electrical installations, wiring diagrams, etc.
• Work with systems engineers to define whole vehicle pin-level interconnect
• Work with physical architects to define harness routing channels, space claims

Qualifications:
• Required – able to obtain security clearance if necessary.
• Able to balance cost/schedule/technical priorities
• Occasional overtime, and weekend hours may be required to complete critical tasks.
• Strong interpersonal skills and ability to work with interdisciplinary teams.
• Strong multi-tasking skills
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering or equivalent, and 5-7 years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7209
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

MP&P Engineer

Description:
Position Requirements
The Engineer will have the responsibility of working with and leading activities within the Inorganic Surface Treatments and Finishes team for Client Materials and Manufacturing Technology (MMT) Chemical Technology team.
• Though the physical position is in Huntsville AL, the engineer will be responsible for activities globally, including performing on the Internal Research and Design (IRAD) portfolio from New Business Funds (NBF) for alternative electro-plating and electro-less plating relation to the Next generation Hex Chrome replacement finishes, Cadmium replacement finishes, and the use of more environmentally safe chemicals (e.g. alternatives to the use of Boric Acid, Hydro Fluoric acid) in the finishing processes. This will involve oversite, technical coordination with BR&T India, and possibly BR&T China, and Global suppliers.
This requires an in-depth knowledge in the science of electro-finishing and hands-on applications in industry (large tanks) and small tank research. The effort will include technical coordination with strategic stakeholders and partners for developing alternative metal surface finish chemistries and finishing processes, leveraging and coordinating with industry & other Sr. Finishing experts. Most of the work is supported through the operation, maintenance, and retrofitting of a current finishing line in Huntsville AL made up of 32 - 100 gallon tanks, covering several of standards (plating, anodizing, conversion coating, deoxidizer, etchants, etc.) and for new chemistries, as well as a small Barrel Plating line of 20 gallon tanks.
The Engineer will be a key participant in the future vision for alternative products, the forecasting and planning of the work to justify future funding, including cooperative funding (CRAD – Contract Research and Development and CRADA – Cooperative Research and Development Agreement). This will include working with Principal Investigators to establish the needed budget for current and future years, the resource and schedule planning for achieving the goals, working with internal stakeholders and external stakeholders (NAVAIR, Army Research Lab, Navy Research Lab, NASA, Small business strategic partners) for the deliverables and commitment dates, as well as the potential transition of new technology such as Technical Readiness/Manufacturing Readiness Level 6 to pre-Product Development and then to Manufacturing.

Preferred Qualifications:
Electro Finishing and some electro-less finishing, with hands on experience of Industry surface finishing processing (7 years minimum) with the stand up of a new process, the surface finishing science, and the scale-up of a lab research line to a large tank line, the process control and maintenance of a tank line, standard testing (e.g. ASTM, SAE, and BACs are a significant plus..) for inorganic coating finishes, and experience in introducing new chemistry for consideration and to obtain qualification for that new product.

Education:Bachelor of Science Degree in Chemistry, Materials Science or Chemical Engineering with a minimum of 10 years’ industry experience
 
Job Number: 10292018
Job Location: Huntsville, AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/29/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: shailendra.mishra@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

MP&P Engineer 3
(U.S. Citizenship Required*)
Huntsville, AL
2018-7235

Support our Airline’s alternatives and product development as well as emergent manufacturing issue resolution activities

Responsibilities:
• Work with and lead activities within the Inorganic Surface Treatments and Finishes team for Company Research and Technology Materials and Manufacturing Technology and Chemical Technology team.
• Perform on the Internal Research and Design (IRAD) portfolio from New Business Funds (NBF) for alternative electro-plating and electro-less plating relation to the Next generation Hex Chrome replacement finishes, Cadmium replacement finishes, and the use of more environmentally safe chemicals (e.g.. alternatives to the use of Boric Acid, Hydro Fluoric acid) in the finishing processes. This will involve oversite, technical coordination with BR&T India, and possibly BR&T China, and Global suppliers.
• The effort will include technical coordination with strategic stakeholders and partners for developing alternative metal surface finish chemistries and finishing processes, leveraging and coordinating with industry & other Sr. Finishing experts within the company.
• Support the operation, maintenance, and retrofitting of a current finishing line made up of 32 - 100 gallon tanks, covering several of company standards (plating, anodizing, conversion coating, deoxidizer, etchants, etc.) and for new chemistries, as well as a small Barrel Plating line of 20 gallon tanks.
• Work with Principal Investigators (Research Engineers) to establish the needed budget for current and future years, the resource and schedule planning for achieving the goals, working with internal stakeholders (e.g. the programs such as 737, 777, 787, Defense platforms) and external stakeholders (NAVAIR, Army Research Lab, Navy Research Lab, NASA, Small business strategic partners) for the deliverables and commitment dates, as well as the potential transition of new technology such as Technical Readiness/Manufacturing Readiness Level 6 to pre-Product Development and then to Manufacturing.


Qualification:
• Requires an in-depth knowledge in the science of electro-finishing and hands-on applications in industry (large tanks) and small tank research.

Preferred Qualifications
• Electro Finishing and some electro-less finishing, with hands on experience of Industry surface finishing processing (7 years minimum) with the stand up of a new process, the surface finishing science, and the scale-up of a lab research line to a large tank line, the process control and maintenance of a tank line, standard testing (e.g. ASTM, SAE, and BACs are a significant plus..) for inorganic coating finishes, and experience in introducing new chemistry for consideration and to obtain qualification for that new product.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science Degree in Chemistry, Materials Science or Chemical Engineering with a minimum of 10 years industry experience OR and preferred a PHD Chemistry, Materials Science or Chemical Engineering with a minimum of 7 years’ experience in inorganic surface treatments and electro-finishing and electroless finishing technology.


Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7235
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

MP&P Engineer 5

Description:
PDS Tech, Inc. is seeking a candidate for the MP&P Engineer 5 located in Everett, WA. 
  • Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes.
  • Qualify new materials, parts and processes to meet requirements.
  • Leads integration and process control of new technologies.
  • Reviews and approves test and audit programs to qualify suppliers to applicable requirements.
  • Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination.
  • Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.
  • Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.

• Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)



• Knowledge of FMEA and PFMEA.



• Expert knowledge of Design of Experiment and data analysis. 



• Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious. 



• Develops advanced technical ideas and guides their development into final product. 



• Serves as organization spokesperson on advanced projects and programs. 



Other Skills: Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 1810092011
Job Location: Everett, WA
Duration: 6 months
Input Date: 09/20/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f1fvAAA&URLSource=cjhunter

MP&P Engineer 5 - WA

Description:
Chipton-Ross is seeking a MP&P Engineer 5 located in
Everett, WA

RESPONSIBILITIES:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
Develops advanced technical ideas and guides their development into final product.
Serves as organization spokesperson on advanced projects and programs.


REQUIRED EXPERIENCE:
Knowledge of Boeing's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
Knowledge of FMEA and PFMEA.
Expert knowledge of Design of Experiment and data analysis.
Other Skills: Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

EDUCATION:
Accredited Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

MISC:
Travel Comments: Minimal

WORK HOURS:
Full-Time/First Shift

 
Job Number: 173984
Job Location: Everett, WA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 09/19/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 12/10/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer V - (Everett, WA)

Description:
Material & Process Engineer V

Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
• Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.

• Knowledge of Boeing's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

• Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)

• Knowledge of FMEA and PFMEA.

• Expert knowledge of Design of Experiment and data analysis.

• Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.

• Develops advanced technical ideas and guides their development into final product.

• Serves as organization spokesperson on advanced projects and programs.

Other Skills: Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MP&PEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Unique Skills:



Solumina and SAP experience preferred



 


 
Job Number: 1810094159
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/17/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw3wQAA&URLSource=cjhunter

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 



 



 


 
Job Number: 1810094046
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/11/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qvjcQAA&URLSource=cjhunter

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.



Unique Skills:



Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software. Preferred Manufacturing Planning experience.



 


 
Job Number: 1810092024
Job Location: Savannah, GA
Duration: 6 months
Input Date: 09/20/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f1hSAAQ&URLSource=cjhunter

Manufacturing Eng II

Description:
PDS Tech is seeking a Manufacturing Eng II for an open position in Savannah, GA

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. 

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 

Education and Experience Requirements: Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Unique Skills: Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
 


 
Job Number: 1810091228
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/27/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ezJlAAI&URLSource=cjhunter

Manufacturing Engineer

Description:
Manufacturing Engineer has experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Manufacturing Engineer Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer has proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savanna, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Manufacturing Engineer ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer has proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/09/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Manufacturing Engineer (4 needed, Wing Assembly)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
• SAP and or Solumina experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.



Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
 
Job Number: 24-286
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer (8 needed, Tulsa, OK)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Unique Skills:
• Solumina and SAP experience preferred

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-295
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer (Mid Cabin)

Description:
• Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-300
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer - Production Support

Description:
General Summary:
The Manufacturing Engineer position is responsible for the creation of planning, sequencing and designing.
 
Duties and Responsibilities:
  • Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
  • Develops solutions for production problems relating to materials, manufacturing processes and/or the right tooling.
  • Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor. 
  • Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
  • Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
  • Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
  • Ensures completed tasks have been performed and inspected in accordance with HACI standards.  Identifies and corrects all production and manufacturing issues.
  • Prepares assembly data sheet and updates planning data sheets.  Assist with BOM identification and control.  Prepares and monitors tool orders and first article inspection sheets.
  • Details and assembles methods planning and tool manufacturing planning.


Education, Experience, Certification and/or Licensure:
  • Bachelors' degree in Manufacturing Engineering or other related field strongly preferred.
  • 3 years’ minimum experience within the aerospace industry.
  • Six Sigma Training preferred.

 
Knowledge, Skills and Abilities:

  • Strong analytical skills


  • Ability to read and interpret engineering drawings and/or specifications requirements.
  • Excellent oral and written communication skills.
  • Excellent problem solving skills.
  • Ability to work in a diverse environment.
  • Excellent communication and presentation skills.
  • Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
  • Ability to multitask.
  • Strong organizational skills.
  • Working knowledge of aircraft assembly, sequencing and manufacturing flow.
  • Working knowledge of or exposure to Lean Manufacturing tools.

 
Job Number: 1810094317
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 10/25/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwWVQAY&URLSource=cjhunter

Manufacturing Engineer 3

Description:
PDS TECH INC. is seeking candidate for Manufacturing Engineer 3 position located in Palmdale,CA.

Position Summary / Responsibilities


Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. ​

Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.

Adapts machine or equipment design to factory and production conditions.

May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

 
Qualifications:
Basic Qualifications:
  • Bachelor's Science STEM (Science, Technology, Engineering, Math) Degree and 5 years of related work experience. Or 3 Years with Masters; 0 Years with PhD.
  • Must be Familiar with MS Office (Word, Excel, PowerPoint and Project)
  • Must have CAD (CATIA) experience.
  • Manufacturing Liaison experience as well as have outstanding written and oral communication skills.

 

Preferred Qualifications:

  • MES experience
  • Previous experience with SAP
  • CATIA V5 Experience
  • Composites fabrication and tooling concepts
  • GD&T

 
Job Number: 1810083522
Job Location: Palmdale, CA
Duration: 0 months
Input Date: 03/30/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJWQAA2&URLSource=cjhunter

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
SAP and Solumina experience preferred.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10089
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/08/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10009
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/24/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9993
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience with SAP, Solumina and Catia preferred.

Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9996
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.


Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-287
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/19/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term W2 Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
SAP and Solumina experience preferred.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9803
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 11/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
SAP and Solumina experience preferred.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9804
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term W2 Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9762
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Manufacturing Engineer II (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-301
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II (Mods, rework, cabin)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-302
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II - Composites

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

UNIQUE SKILLS
• Preferred candidate must have composite material structure manufacturing or aerospace manufacturing assembly experience.
• Solumina and/or Catia experience desirable.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

REQUIREMENTS
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

ESSENTIAL FUNCTIONS
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
 
Job Number: 24-292
Job Location: Savannah, FL
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: jeff@precisionpersonnel.com
Website: www.precisionpersonnel.com

Manufacturing Engineer II - Electrical

Description:
Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
Unique Skills:
Solumina and SAP experience preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 373573
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 12/11/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Manufacturing Engineer- Designer

Description:
PDS TECH IS LOOKING FOR Manufacturing Engineers with Design experience IMMEDIATELY for our client in North Carolina.

If you are available & interested - call Lucinda 316-854-3045 and send your resume to: lcontreras@pdstech.com .
 
Duties and Responsibilities:
  • Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment.
  • Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications.
  • Interprets engineering drawings to determine requirements meet objectives. Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor. 
  • Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
  • Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
  • Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
  • Ensures completed tasks have been performed and inspected in accordance with company standards.  Identifies and corrects all production and manufacturing issues.
  • Prepares assembly data sheet and updates planning data sheets.  Assist with BOM identification and control.  Prepares and monitors tool orders and first article inspection sheets.
  • Details and assembles methods planning and tool manufacturing planning.  

Education, Experience, Certification and/or Licensure:
  • Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
  • In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
  • Experience as a Manufacturing Engineer in a past position along with Design Engineering experience preferred.
  • Experience in aerospace industry in aerospace manufacturing.  


Knowledge, Skills and Abilities:

  • Experience utilizing tools such as SAP, CAD CAM, CATIA V5, GD&T, Microsoft Office Suites (Word, Excel, PowerPoint, Project, and Lotus Notes).
  • Project based experience is preferred.
  • Working knowledge of or exposure to Lean Manufacturing tools.
  • Ability to read and interpret engineering drawings and/or specifications requirements.
  • Excellent oral and written communication skills.
  • Excellent problem solving skills.
  • Ability to work in a diverse environment.
  • Excellent communication and presentation skills.
  • Ability to multitask.
  • Strong organizational skills.  


Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

 
Job Number: 1810089478
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 08/01/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mh0DAAQ&URLSource=cjhunter

Mechanical Design Engineer

Description:
BS degree; 6-8 years of CAD software experience using Pro/E PTC Creo 3; active DoD secret clearance with re-investigation withing past 5 years is a plus; familiarity with MS Office applications

Contact one of our recruiters for more information on the above job and many more!

David Dodson - ddodson@teamglobal.com
Gary Kidd - gkidd@teamglobal.com
Mark Milligan - mmilliga@teamglobal.com
Sanjat Khatri - skhatri@teamglobal.com
 
Job Location: Dallas, TX
Input Date: 10/29/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
Email: gcpjobs@teamglobal.com
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 12/11/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Designer (KS)

Description:
FOR KANSAS LOCAL RESIDENT ONLY
The qualified applicant will have at least 5 years of experience utilizing AutoCAD, CADWORX, Microsoft Office Applications.

A minimum of two years of college in the Engineering Sciences or a Vocational Technical Degree with emphasis in drafting/design or engineering sciences.

The designer will work under the direction of the design supervisor or project manager for the day to day activities. The supervisor or project manager will schedule the person's work load and work with the individual to implement the proper design standards and design guidelines from the Client's Engineering Standards and Desk Instructions.

Create production drawings and specfication from engineering layouts, typically generated by a project engineer, and produce individual component drawings and assembly drawings used in engineering.

Incorporating the ECN's (Engineering Change Notices)into current engineering documentations and updating drawings.

Updating of the Engineering, Design, and Drafting Standards.

The position is a 40 hours per week, full time non-exempt salary position. Work hours are from 8:00am to 5:00pm with one hour for lunch. Some overtime may be expected at times but not as an ongoing basis. Salary will be commensurate with experience with full company benefits. We provide a pleasant, clean and positive work environment.


FOSTER DESIGN'S BENEFITS:
* Working for a 54 year old company
* Minimum 10 Paid Holidays with no waiting period
* Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
* BCBS Medical/Dental/Vision/Prescription card
* MetLife - Long Term Disability Insurance
* Vacation Accrual
* Per Diem, where available
* Packaged split-out per diem for tax purposes, when applicable
* Paid Weekly (Direct Deposit)
* Referral Bonus Plan
* Individual Business Cards, upon request
 
Job Number: FD-112618KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/26/2018
Last Updated: 12/07/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

Mechanical Engineer

Description:
PDS Tech, Inc. is seeking a Mechanical Engineer  in Hazelwood, MO. 

Job Purpose


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services.

Principal Accountabilities



  • Designs, develops, and documents mechanical and fluid systems and thermal environments.
  • Develops, maintains and/or modifies system designs/proposals to provide design documentation and high-level requirements to downstream users/customers.
  • Performs detail design development and modification of mechanical installations using relevant CAD and analysis tools.
  • Performs spatial integration at system or component level and modifications of mechanisms.
  • Prepares technical documents for mechanical components and systems.
  • Supports proposal preparation and new business development efforts.


 Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Education & Qualifications:
  • BS Degree in Engineering or related technical discipline
  • 7+ years of experience in mechanical engineering field; or MS Degree in Engineering or related technical discipline and 5+ years’ experience
  • U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements

 Additional Desired Qualifications

  • Aerostructures (metallics and/or composites) experience
  • Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook


Physical Demands



  • Frequently required to spend long hours staying at a work stations and using office equipment 
  • Frequently required to spend long hours walking and standing on the production floor
  • May be required to use stairs when elevator is not available
  • Must occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1810094549
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 11/07/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxWTQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:

・Working knowledge of Autodesk Inventor, Auto Cad and Catia V5, and DELMIA
・Communicate with customers on design & manufacturing requirements and share all necessary information with the home office engineering team.
・Develop and revise 2D & 3D design based on given specifications and spec changes.
・Coordinate fabrication, machining, assembly and integration work with local suppliers in an effort to ensure cost, quality and delivery fulfillment as well as working with vendors and component suppliers.
・Technical development and improvement of manufacturing systems and processes; including process / plant layout, work sequence, fixtures / tools / equipment and material flow.
・Ensure all design models, drawings and bills of material are completed per requirements.
・Support manufacturing, including the supervision of build and testing as well as service during the lifespan of the product.
・Communicate with and support management in a timely and efficient manner.
・Welding process development, Project Management, Product Launch and Design.
・Experience with pneumatic tools, hydraulics, automated production equipment, machining, welding and forming requirements, as well as electrical systems.
・Ability to plan, develop, layout, fabricate, assemble, maintain and repair tooling.
・Ability to study and understand specifications, blueprints, sketches and 3D models.
・Broad machine design experience, including motion control
・Exposure to metal fabrication technologies
・Understanding of car body structure, pressing, welding and sealing technologies.
・Ability to create and develop process plans and layouts.
・Understanding of ergonomics, safety and environmental policies.
・Ability to manage quality and cost within design
 
Job Number: NSR10033ME
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Exempt
Duration: Direct Hire
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 11/14/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

Mechanical Engineer - Clearance / Mechanical and Propulsion Engineering associated with missile systems CO

Description:
Mechanical Engineer - Clearance
Contractor's Work Location Denver, CO

Number of Positions 2

Assignment Type Temp to Hire

Target Start Date 12/03/2018
Target End Date 03/02/2020

Work Schedule 9/80
Estimated Regular Hours/Week 44.00
Shift 1st
OT Expected No
Straight Time (Exempt)
Drug Screen Yes
Background Checks Yes

Position Description
This position is located in Denver, Colorado and supports the Air Force Hypersonic Conventional Strike Weapon (HCSW) Program. This Mechanical Engineer Staff Position supports the Weapon System Booster Integration Team and Manager by performing requirements tasks such as creation of the WS Specification, Requirements analysis, allocation and decomposition, generation of specification trees, Level 1 and Level 2 requirements specification generation, verification planning and support to the program major reviews and associated deliverables. Specific area of focus for this position is development, qualification, and deployment of the Booster Propulsion System.

Skills Required
- Bachelors degree from an accredited college in a related discipline or equivalent experience/combined education, with 9 years of professional experience; or 7 years of professional experience with a related Master's Degree.
- Considered an Emerging Authority in Propulsion Engineering
- Knowledge of Mechanical and Propulsion Engineering Principals
- Knowledge of Requirements development and management
- Demonstrated interpersonal skills and teamwork with internal customers
- Excellent organizational and verbal/written communication skills
- Proficiency with standard documentation and presentation tools
- Experience with Mechanical and Propulsion Engineering associated with missile systems

Skills Preferred
- Conceptual design and refinement for flight vehicle design
- Coordination of requirements and interface implementation with suppliers and internal customers.
- Management of supplier design and analysis review
- Review 3D-CAD model compatibility with the booster and associated technical data, review of external analyses such as trajectory performance, stuctural analysis, dynamic analysis, thermal analysis, etc. in compliance with requirements and interfaces.
- Interface Definition for Solid Boost Motor to Structures, Ordinance, Controls and Avionics Subsystems
- Updates to flight vehicle design based on results of above analyses. Input to preliminary design report and resolution of technical issues
- Attendance at and technical assessment of supplier conceptual design reviews, preliminary design reviews, and technical interchange meetings.
- Technical review of monthly subcontractor status reports.

Experience Required
- Considered an Emerging Authority in Propulsion Engineering
- Knowledge of Mechanical and Propulsion Engineering Principles
- Knowledge of Requirements development and management

Education Required
- Bachelors degree from an accredited college in a related discipline or equivalent experience/combined education, with 9 years of professional experience; or 7 years of professional experience with a related Master's Degree.
 
Job Number: JE-105S
Job Location: Denver, CO
Rate: 75-85/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/27/2018
Last Updated: 12/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical or Piping Designer (OK)

Description:
Designer would be expected to have 5 to 15 years of experience.
Refinery Background.

Primary Functions/Responsibilities:

Safety:
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, mechanical detail design packages for projects and turnarounds.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Must be able to work with very little supervision.
Strong project and CAD experience.
(Microstation experience a plus)
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player.
Will review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays, with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Accrual
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-112518OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/26/2018
Last Updated: 12/07/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Email: contract@fosterdes.com
Website: www.fosterdes.com

Model Maker - Level 3 - FL

Description:
Chipton-Ross is seeking a Model Maker - Level 3 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and fabricates tools and parts in metals and plastics through machining and heat-treating operations. Works from blueprints, drawings, or verbal instructions using math and basic computer skills. Maintains model shop machinery. May enter data from blueprints or databases into CAD/CAM system, generate numerical control program, and transmits program to machining center. May monitor and verify quality in accordance with statistical process or other control procedures.Sets up and operates a variety of machine tools such as lathes, milling machines, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
Precision machining involving set up, programming and operation on a variety of CNC machines using a multitude of machine tools. Must be able to interpret and apply Geometric Dimensioning and Tolerancing (GD&T). Must have the ability to work first or second shift.

PREFERRED EXPERIENCE:
Technically trained with an extensive machining background in a variety of metals and other materials. Prior experience with CAD/CAM programs and posting to CNC machines.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift
Full-Time

 
Job Number: 172302
Job Location: Orlando, FL
Rate: Up to $32.93 DOE
Duration: 12 Months
Input Date: 07/05/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Rocket Propulsion Engineer and Designer (641)

Description:
*These are 15 month contract positions located in Littleton, CO*
*No relocation is available, must have an active clearance to apply*
*On site position, per diem SPLIT is available for those out of town*
We are seeking a (1) contract propulsion engineer and (1) propulsion design engineer who will be working on DoD weapon system booster rockets.



The propulsion engineer will be working from requirements gathering and analysis, to developing requirements, allocation / decomposition, generation of specification trees, requirement specification generation, verification planning and support to the program reviews and deliverables.



Duties may include working with and being a liaison with suppliers, particularly with design reviews and periodic supplier status reporting, design and review of CAD model compatibilities, analyses of trajectory / structural performance, dynamic and thermal analyses. Candidate will work with interface definition for solid boost motor as relates to structures, ordnance, control and avionics systems.



Required, Propulsion Engineer:
*9 years’ experience in missile propulsion engineering
*Active Secret Clearance
*BSME or similar engineering degree



Required, Propulsion Designer:
*5 years’ experience in designing, defining and drafting specifications; modeling, design and drawing generation, such as Interface Control Drawing (ICDs); drawing analysis review of propulsion systems
*Skilled in Creo
*Knowledge of structural / dynamic analyses of primary and key secondary structures.
*Background in thermal analysis of structure, including external launch, captive carry, and ascent and induced environments, as well as component heating.
 
Job Number: 641
Job Location: Littleton, CO
Input Date: 12/03/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Sheet Metal Fabricator Level 2 - FL

Description:
Chipton-Ross is seeking a Sheet Metal Fabricator Level 2 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and fabricates tools and parts in metals and plastics through machining and heat-treating operations. Works from blueprints, drawings, or verbal instructions using math and basic computer skills. Maintains model shop machinery. May enter data from blueprints or databases into CAD/CAM system, generate numerical control program, and transmits program to machining center. May monitor and verify quality in accordance with statistical process or other control procedures.Sets up and operates a variety of machine tools such as lathes, milling machines, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures.

REQUIRED EXPERIENCE:
Typically requires completion of a formal apprenticeship or equivalent training and experience.
Technically trained with an extensive sheet metal manufacturing background.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift
Full-Time

 
Job Number: 173897
Job Location: Orlando, FL
Rate: Up to $32.93 DOE
Duration: 11 Months
Input Date: 09/14/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Sr Technical Illustrator

Description:
Sr. Technical Illustrator prepare, construct, and revise of Orthographic illustrations, Axonometric projections, Wiring and Schematic diagrams for technical aircraft manuals and other related graphical publications utilizing electronic methodology. Must create and manipulate graphics and using MicroStation and CADAM technical illustrating system. Must be functionally literate with 3-dimensional graphics, surfaces, wiring frames, and solids. Experience with EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired


Sr. Technical Illustrator prepares, construct and revise MicroStation data (3-D, and 2-D data). 2. Prepare, construct, and revise orthographic illustrations, axonometric projections, and Wiring/Schematic diagrams on MicroStation. 3. Determine optimum graphic approach; independently prepare master artwork, charts, visual, booklets, and signs, working with all aspects of graphic arts production by utilizing electronic illustrating equipment. 4. Work with engineers, technical writers, customers, vendors, and suppliers to effectively visualize and conceptualize graphic design problems to include technical as well as non-technical graphics, color separations, overlays, and comprehensive type requirements. 5. Ensure illustrations conform to corporate, ATA 100, FAA, and commercial aircraft technical manual specifications and company style requirements. 6. Maintain up-to-date knowledge of artwork techniques, materials, and equipment. 7. Experience working with equipment related to and associated with electronic illustrating tools, including: High-resolution scanners, PCs and related illustration software, printers, general knowledge of electronic publishing systems, related printers and data requirements. Perform other duties as assigned.

 Sr. Technical Illustrator has the ability to read and interpret wiring schematics, blueprints and engineering orders. 2. Background familiarity with CADAM, Catia, and CCD. Mainframe user level operations, networks, and scanners. SmarTeam experience a plus. 3. Knowledge of import/export of data files such as: (.dxf, tiff, .cgm, and iges) and electronic publishing are desirable qualities. 4. Knowledge of 3-D modeling and animation. 5. Working knowledge of Right Hemisphere software. 6. Video, motion or animation graphics experience a plus.

Bachelor's Degree required or equivalent combination of education and experience. 4 years exp in electronic technical illustrating. Ability to operate Micro-Station, Adobe Illustrator and other Adobe illustration software.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/27/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Sr. Manufacturing Engineer - MI

Description:
Chipton-Ross is seeking a Sr. Manufacturing Engineer for an opening in Muskegon, MI.

RESPONSIBILITIES:
-Develop and document processes using equipment, tooling, and material handling (Internal and Purchased)
-Create and maintain the layout of the work area
-Work with cross functional team to ensure processes to meet Quality, Cost, and Delivery metrics
-Document processes based on supplied documentation using equipment, tooling, and material handling (Internal and purchased)
-Create and maintain the layout of the work area
-Evaluate work methods, prepare and / or modify documented work instructions
-Specify tools, gages, fixtures and any related support equipment for assigned areas of responsibility
-Interface with vendors on problem resolution, fixture design and build or rebuilding of tools and fixtures
-Train Team Leaders and UAW employees on proper execution of work instructions as needed
-Analyze new product quotes and provide cost estimates on tools, fixtures, machines, gages and recurring labor
-Support production by resolving process, producibility and quality problems using Lean Sigma techniques
-Write Scopes of Work (SOW), detailed presentations, and financial justification for the procurement of capital equipment

REQUIRED EXPERIENCE:
- Must have extensive hands on experience with machining equipment from 1950s to current (Manual, CNC and Automation)
- Availability for occasional business travel
- Availability for casual overtime based on workload and/or urgency
- Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment
- Must be familiar with, and able to utilize all Microsoft Office Applications
- Good written and verbal communication skills required
- Must have experience in working in a manufaturing machining shop ,and experienced in the following:
- Set-up and operation of manual and CNC machining equipment
- Process Planning Software
- Bill of Material structures
- Assembly fixture concepts & Design
- How to work with suppliers in the design and fabrication of fixtures, tools, parts or machines
- How to work within a union environment
- Must be able to read machining and assembly prints and correlate them with the Bill of Material and associated processes
- Must understand metric measurements and tooling
- Previously held security clearance preferred. Ability to get security clearance required
- Must be able to move freely, with or without accommodation, throughout the manufacturing environment

PREFERRED EXPERIENCE:
- Project Management experience, have used MS Project in the past and have developed Statement of Work, Work Breakdown Structure, and Schedules
- Understanding of Geometeric Dimensioning & Tolerancing techniques
- Working knowledge of using CAD models and programs in ProE and AutoCad

EDUCATION:
Accredited Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology with a minimum of 5 years experience required or 21+ years of engine manufacturing experience

WORK HOURS:
9/80, 6am - 5pm
Full-Time


 
Job Number: 174462
Job Location: Muskegon, MI
Rate: $35 to $45.00 DOE
Duration: 11 Months
Input Date: 10/10/2018
Last Updated: 12/11/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Staff Electrical Engineer, in Phoenix, AZ.

•The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
•The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
•Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
•Also includes managing Problem reports for hardware that has already been delivered.
•The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
•As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Education
•BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.
•US Citizenship.

Basic Qualifications
•Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.
•Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
•Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.
•Evaluate and approve electronic components to meet requirements for availability, performance and cost.
•Support project planning efforts and ensure execution to schedule and budget.
•Evaluate failures to determine root cause and corrective actions.
•Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
•Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Preferred Qualifications
•Experience with high reliability controller electronics and power switching circuitry.
•Strong experience in hardware and firmware developed in accordance with the requirements of DO-254 (DAL A).
•Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C Level A.
•Experience working in Cadence Sigrity.
 
Job Number: 1810093238
Job Location: Phoeniz, AZ
Per Diem: Split
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Structural & Payload Design Engineer 3 (UGNX Required) (AZ and MO)

Description:
Structural & Payload Design Engineer 3 & $

Location: Berkeley, MO and Mesa, AZ
Duration: 12+ months

Description:
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Education/Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification with Unigraphics CAD experience.

Skill Code: 647-Structural Design
 
Job Number: 17-08012
Job Location: Berkeley, MO
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 12/10/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer II / ABAQUS Hypermesh TX

Description:
163471 Structural Analysis / Sr. Mechanical Engineer II


Work Site Address: Dallas TX
Job Number: 8752322
Max Pay Rate: 75.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Mechanical Engineer to support an airborne structure program in Dallas, TX. The selected candidate will be responsible for conducting detailed structural analysis using ABAQUS/CAE to support the design and optimization of the product. The tasks will include detailed part modeling and analysis based on inputs from a loads model, as well as working with the loads model itself. The analysis tasks will include assessing part designs for static and dynamic strength, fatigue, and durability. The selected candidate will work under general direction of the structural analysis team and will be accountable for completing the work within the agreed upon cost and schedule. Intermediate to advanced knowledge of ABAQUS/CAE is a requirement, as ABAQUS/CAE is the tool of choice for this project. Experience with Hypermesh can be considered in addition to ABAQUS/CAE.


Qualifications and Education Requirements
Required Skills
Understanding of finite element structural analysis Intermediate or Advanced knowledge of ABAQUS/CAE and/or Hypermesh
Experience with MS Office (Word, Excel, PowerPoint) Ability to manage multiple priorities

Desired Skills
Weight optimization experience Vibration and dynamics experience Fatigue/damage tolerance experience.
Experience with aircraft primary structure design/analysis
Knowledge of commercial CAD software, such as CREO Programming skills in Python language
Experience with AFGROW

Required Education Must have a B.S. or higher from an accredited university with a major in Mechanical Engineering, Aerospace Engineering, Computer Science, Math, or other related field
 
Job Number: MB-R8752322
Job Location: Dallas, TX
Rate: 75/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/20/2018
Last Updated: 11/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Level 2

Description:
Location: Centennial, CO
Duration: 3 month contract (possibility of extension)
Pay Rate: DOE
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Design Engineer with 5 years of overall experience in Structural Design.
- Perform structural design of hardware on the Vulcan launch vehicle upper stage.
- Hardware includes components, small assemblies, and large assemblies.
- Designer needs to be experienced in NX11 CAD modeling (3+ yrs experience).
- They should also have experience with designing metals for machining and assembly.
- Experience with test documentation preferred.
- Prefer aerospace industry background.

Education:
- Requires a bachelor’s degree and 2 - 6 years of experience.
 
Job Number: 9748
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3 mos
Start Date: ASAP
Input Date: 11/08/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Test & Evaluation Engineer 3
(U.S. Citizenship Required*)
Tukwila, WA
2018-7215

Responsibilities:
• Utilize analytical tools (e.g., classical stress analysis, finite element analysis, CAD based kinematics) to validate design and document in report format.

Qualification:
• Required – skill and experience in Mechanical design & CATIA V5
• Proficient in MS Excel – required
• Skilled mechanical and structural design engineer, proficient with CATIA V5 and assembly design.
• Complete knowledge of design of experimental models, mechanisms, prototypes, test rigs and fixtures, test equipment, and load measurement devices. Includes mechanical, hydraulic and pneumatics systems design.
• Knowledge of machine shop tools and processes.
• Able to integrate wide range of test instrumentation (e.g., strain, pressure, and temperature).
• Familiar with company processes, design manuals and drawing release in a lab test environment (i.e non-production). Prefer lab test related background.
• Familiar with company fastener design, selection, specification, supersession, process specifications and standards. Familiar with hardware and fastener installation as well as sheet metal design.
• Complete understanding of CATIA workbenches- drawing, GSD, product structure and libraries.
• Experienced with 3D modeling, 3D geometry, power copies, generating views, drawings, products and save management in CATIA.
• Experienced with company REDARS
• Knowledge of manufacturing and assembly processes in a lab environment.
• General knowledge of shop processes and practices in a lab environment.
• Able to work quickly and efficiently in a project environment under the direction of design engineers.
• Able to communicate clearly and effectively with technical experts as well as support team in the execution of the project goals.
• Wiring harness design and ENOVIA skill/experience desired
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7215
Job Location: Tukwila, WA
Rate: Based on experience
Duration: 6 Months
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Saralynn Halsey
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Tukwila, WA
Duration: 6 months with possible extension up to 1 year

Description:
Complete knowledge of design of experimental models, mechanisms, prototypes, test rigs and fixtures, test equipment, and load measurement devices. Includes mechanical, hydraulic and pneumatics systems design. Knowledge of machine shop tools and processes. Ability to integrate wide range of test instrumentation (e.g., strain, pressure, and temperature). Utilizes analytical tools (e.g., classical stress analysis, finite element analysis, CAD based kinematics) to validate design and document in report format.

Skilled mechanical and structural design engineer, proficient with CATIA and assembly design.
Familiar with client processes, design manuals and drawing release in a lab test environment (i.e non-production). Prefer lab test related background.
Familiar with client fastener design, selection, specification, supersession, process specifications and standards. Familiar with hardware and fastener installation as well as sheet metal design.
Complete understanding of CATIA workbenches- drawing, GSD, product structure and libraries.
Experienced with 3D modeling, 3D geometry, power copies, generating views, drawings, products and save management in CATIA.
Experienced with client REDARS
Knowledge of manufacturing and assembly processes in a lab environment.
General knowledge of shop processes and practices in a lab environment.
Able to work quickly and efficiently in a project environment under the direction of design engineers.
Able to communicate clearly and effectively with technical experts as well as support team in the execution of the project goals.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.

Skill Code:
657-Aerodynamic Testing
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/26/2018
Last Updated: 12/10/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

Thermal/Fluids Analyst - Secret

Description:
PDS Tech, Inc. is seeking a Thermal/Fluids Analyst, in Minneapolis, MN.
Activities involve the thermal and fluid analyses supporting design and testing of precision guide munitions systems.
The position is within the Thermal and Fluid Sciences group of the Applied Mechanics department.
That group is responsible for thermal and fluids analyses in support of requirements assessments, trades studies, prototype design, detailed design, test preparation, and analysis of thermal/fluids-related test data to successfully guide design activities.
The and position work within an interdisciplinary design team to support the iterative and evolving design process.
• Model development - System and environment information collection - Material information collection - Development of a model - Model running for various scenarios - Collecting, summarizing, and analyzing results relative to task requirements - Documenting and presenting results with conclusions and recommendations
• Active participation in design team meetings
• Active participation in test planning activities
• Analysis, interpretation, and application of test data to design activities
• Working with group colleagues to develop and apply best practices to analysis activities

Skills/Experience/Education Required
• Proven skills in developing working fluids and thermal models from first principles
• Proven ability to develop working fluids and thermal models for complex geometries, boundary conditions, and initial conditions
• Proven ability to interpret, document, and report results of analyses to support design activities

• 5+ years of experience in fluids and thermal analyses
• Experience performing system engineering trade studies, analysis of alternatives, sensitivity analyses, etc.
• Experience working in an interdisciplinary engineering design team

• Bachelor's degree in Mechanical, Aerospace, or Chemical engineering OR Physics
Must have and active Secret clearance or held one within the last two years. Please list the candidate's clearance level in the submittal 

 Skills/Experience/Education Preferred
• Working familiarity with analysis tools such as ANSYS (Mechanical, CFX, Fluent) or STAR-CCM+
• Demonstrated ability to import geometries from CAD models (Creo) into analysis software
• Demonstrated ability to relate model results to allowable limits
• Familiarity with fluids and thermal test methods including test planning, instrumentation, data acquisition, and data analysis to validate models and conclusions
       
• Analysis of weapon systems
• Familiarity with weapon's specs
• Familiarity with multi-physics modeling
• Experience with aerodynamics
• Experience with HVAC systems
• Master's or PhD in Mechanical or Aerospace engineering with emphasis in fluid mechanics or heat transfer

 
 
Job Number: 1810093607
Job Location: Minneapolis, MN
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ramon Quintana
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f84ZAAQ&URLSource=cjhunter

Tool Design Engineer III

Description:
PDS is seeking an Tool Design Engineer III for an open position in Savannah, GA.


Position Purpose:

Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Gulfstream aircraft.



Principle Duties and Responsibilities:



Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 



Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 



Education and Experience Requirements:




Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.


Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.



Unique Skills:



Must be proficient with Catia V5

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 




 


 
Job Number: 1810093203
Job Location: Savannah, GA
Duration: 6 months
Input Date: 10/09/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f6f5AAA&URLSource=cjhunter

Tool Design Engineer III

Description:
Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Company aircraft.

Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Company aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
Unique Skills:
Catia V5

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills.
2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.
 
Job Number: 373607
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-289
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 10/08/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9944
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tool Design Engineer III (Tulsa)

Description:
• Performs engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

Unique Skills:
• Must be proficient in Catia V5

Principal Duties and Responsibilities:
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.
• Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
• Demonstrated knowledge of materials, material strengths, heat treat method and uses.
• Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education Requirements
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-299
Job Location: Tulsa, OK
Rate: $60
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 12/03/2018
Last Updated: 12/10/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Tool Design Engineer Level 3

Description:
Location: Grand Prairie, TX
Duration: 6 mos
Pay Rate: DOE - $ ph (W2)

Job Description:
Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. May use CAD/CAM to design tools.

Active SECRET clearance preferred.

Skill/Experience/Education
Must CREO/Windchill and GD&T experience
Desired SAP experience.
 
Job Number: 55312_55313
Job Location: Grand Prairie, TX
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 mos.
Start Date: 12/03/2018
Input Date: 11/20/2018
Last Updated: 11/28/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Suzanne Schmidt
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: SSchmidt@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Level 3

Description:
Our client is looking for a Tool Design individual! Apply today if you have the skills!

The ideal candidate for this position will perform the following tasks:
* Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
* May use CAD/CAM to design tools.

Mandatory Qualifications and Experience:
* CREO/Windchill, GD&T

Desired Qualifications and Experience:
* SAP

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129030
Job Location: Grand Prairie, TX
Duration: 6 mos
Start Date: 10/29/2018
Input Date: 10/17/2018
Last Updated: 11/02/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Preference is candidates with Active Secret or Interim clearance but will consider candidates with no clearance;

Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. May use CAD/CAM to design tools.

CREO/Windchill, GD&T

SAP
 
Job Number: 45140
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/26/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 12/07/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 11/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer 3

Description:
Seeking a Tooling Engineer 3 for an opening in Redmond, WA.

RESPONSIBILITIES:
Design and draft fabrication tooling using Unigraphics NX to engineering requirements. Support procurement activities, fabrication, assembly calibration and documentation associated with tool build.

REQUIRED EXPERIENCE:
Unigraphics NX, Tool Design and drafting

PREFERRED EXPERIENCE:
Solid Modeling, CAD, Machining

EDUCATION:
Accredited Bachelor of Science in Mechanical Engineering

WORK HOURS:
9/80
Full-Time
 
Job Number: 174831
Job Location: Redmond, WA
Rate: $40.77/hr
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/05/2018
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Tooling Engineer 3

Description:
Location: Redmond, WA
Rate: $40.00/HR
Duration: 6 month contract
Schedule: 9/80
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
The Tool Engineer 3 develops and designs a variety of tools and equipment required to support the manufacturing, quality and test operations. These positions performs feasibility analysis of special tool plans; create tool concepts and drawings utilizing environmental health and safety procedures, tool standards manuals and sound engineering practices; initiate fabrication and assist with inspection and operational checkout of special tools; and resolve tooling problems encountered during tool usage.

Under general direction, the Senior Tool Engineer determines approaches to objectives demonstrating a complete understanding and application of principles, concepts, and practices.

Typical responsibilities include:
- Provides imaginative, thorough and practicable solutions to a wide range of technical problems involving the conventional utilization of tool engineering techniques
- Conceives and plans projects involving the development of new methods to attain objectives
- Performs tool design and modification requiring knowledge of production processes, requirements, design concepts and materials
- Interprets production plans and creates tooling to accomplish contractual or production requirements
- Coordinates and clarifies engineering and design standards
- Performs complex stress analyses and advises on structural requirements, machine suitability and method of fabrication
- Develops complex machine shop tooling, special tooling for production, inspection tooling, test tooling, and handling equipment
- Observes and evaluates major tool tryouts for design suitability and authorizes deviation and/or tool design changes
- Follows programs through completion, maintaining liaison with manufacturing, planning and project engineering
- Maintains an interchange of information with tool suppliers regarding optimum fabrication methods, materials, designs and repairs
- Prepares design and fabrication cost estimates, schedule of materials and manpower
- Provides technical guidance to less senior tool engineers and designers
- Directs tool design and fabrication of special tooling
- Presents formal tool and design reviews and may include customer interface
- Maintains budget and schedule for assigned project tool string
- Provides manpower forecasting for design on assigned project
- May include cost account management
- Provides technical support and assistance in manufacturing process planning
- Provides support to product engineering to attain manufacturability and tooling feasibility
- May work closely with strategic suppliers in design and fabrication techniques and tool quality acceptance
- Prepares or updates Program Tooling and Equipment List with input from other functional groups
- Coordinates review and approval of drawings and design schematics in accordance with approval requirements of CM-EP001-1

Skills:
Required: Unigraphics NX, Tool Design and drafting

Desired: Solid Modeling, CAD, Machining

Education:
A Bachelor's degree in an appropriate discipline and five (5) years of directly related experience, or an
equivalent combination of education and experience.
 
Job Number: 10053
Job Location: Redmond, WA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/31/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Tooling Inspect Sr

Description:

PDS TECH is looking for a Tooling Inspect Sr for an opening in our Savannah, GA office



Position Purpose:



Under limited supervision, performs inspection duties and assists other tooling inspectors in general and technical aspects of Quality Control in a specified area of tooling inspection.

Principal Duties and Responsibilities:

Essential Functions: 1. Prepares inspection documentation and maintains files as required. Ensures current engineering revisions are incorporated per established procedures. 2. Performs periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 3. Creates Model Base inspection processes using CATIA model based tool designs that can be used for both fabrication and rework of tools by the tool shop personnel. 4. Analyzes data using Metrologic inspection software and create electronic quality folders in SmarTeam to store inspection data for all model based tooling. 5. Promotes and maintains quality standards and processes. 6. Works with tooling suppliers to ensure the inspection data is correct and in the proper format on all in coming tools. 7. Makes recommendations to Tooling Management on continuous improvements in the tooling inspection area. 8. Ensures proper use and storage of area tools, equipment and supplies. Advises management of any associated problems or other requirements. 

Additional Functions: 1. Assists other inspectors as required. 2. Performs other duties as assigned. 

Other Requirements: 1. Ability to import and export inspection data in many different formats (Word, Excel, PDF, etc.). 2. Model Base systems (Cadam, Catia V4, Catia V5) experience preferred. 3. Must be proficient in use of inspection tools and equipment. 4. Must be proficient in use of conventional optical measurement equipment. 5. Must be competent with theodolite and laser tracker systems. 6. Ability to recognize potential problems with drawings and elevate to management. 7. Must be competent with coordinate measurement machines (CMM). 8. Must be competent with electronic tool record keeping system. 9. Must be able to lift up to 40 pounds & pass the vision test as required by area job responsibilities. 10. Must have good communication skills.



 



Education and Experience Requirements:



High school diploma/GED. Valid Drivers License required. Must be proficient in blueprint reading/interpretation, shop math, and quality control manual as required. Eight (8) years technically related experience to include at least six (6) years related inspection experience.
 

Unique Skills:



CMM experience is preferred but experience with Laser Trackers, Articulating Arms or another 3D inspection device is acceptable. Metrolog metrology software preferred but not required. Experience with SA, Verisurf, PCDMIS, etc. also acceptable.


 

 


 
Job Number: 1810093212
Job Location: Savannah, GA
Per Diem: No
Duration: 12 months
Input Date: 10/10/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f6iTAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tracked Fire Control Optical

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Tracked Fire Control Optical
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-7227

Responsibilities:
• Design and build optical systems.
• Support concept to production including architecture analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
• Component selection, procurement, and oversight of hardware build.
• Create optics specifications and test plans.
• Review hardware and software requirement documents and test plans.
• Design, develop, and test optical components and subsystems in support of integration of thermal imaging systems, color and monochrome high resolution cameras, lasers, radar, direct view optics, and stabilized control systems.
• Support integration & testing of sights and electro-optical sensors on the various vehicle platforms.
• Work with other members of the engineering staff to ensure the product meets its requirements.
• Prepare and present written reports, status reports, and presentations as necessary.
• Provide technical support and communication to the program office, customers, and other internal departments.
• Occasional travel required.
• Occasional overtime, and weekend hours may be required to complete critical tasks.

Qualifications:
• Required – able to obtain a security clearance
• Experience with Microsoft Office.
• Experience with optical system design as well as physical and geometrical optics.
• Basic optics laboratory skills including precise alignment and calibration procedures.
• Experience with CAD tools, such as CREO/Pro-E is preferred.
• Optical design and analysis utilizing standard optical tools such as Zemax, Night Vision Integrated Performance Model (NV-IPM) is preferred.
• Experience with Analog and Digital Video. (RS-170, HD-SDI, LVDS, DVI, DisplayPort, 3G SDI, 6G SDI) is preferred.
• Experience with video distribution techniques is preferred.
• Able to use engineering development and tools.
• Strong Interpersonal skills and ability to work with interdisciplinary teams.
• Strong Multi-tasking skills.
• Familiar with Military Standards and test requirements preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Physics, Optics, or Electro-Optical Engineering with a minimum of 3 years of applicable experience.
• Fewer years required with an advanced degree. Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7227
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 11/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Back to Advanced Job Search