Job Search Results

460 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/22 Sunday 08:25PM Pacific Time by ContractJobHunter. )

Listings 1 - 460

Go To My Job Tracker

Expand all descriptions

2393 - EEDA SPECIALIST - cv, word doc only

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.

Possess, as a minimum, a Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Possess a minimum of 8 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

You may also have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

You are also able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management.

Experience with certification authorities' liaison is an asset.
 
Job Number: 2393
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 04/23/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2419 - AVIONICS SYSTEMS INTEGRATOR - cv, word only

Description:
Be responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Client aircrafts.

Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Client Flight Test Center in development and certification tests: witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Client program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

At least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Familiar with part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2419
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/01/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2440 - ELECTRICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Electrical engineers to currently support a number of programs across the Space Mission organization.

Candidates must have a Bachelor's or Master's degree in electrical engineering.

Must be experienced utilizing electronic design tools such as ORCAD Capture, PSpice A/D including Advanced Analysis, OrCAD Signal Explorer, ISE Design Suite, ModelSim, Synplify, and Matlab/Simulink.

Proficient with laboratory equipment: power supplies, multimeters, function generators, oscilloscopes, dynamic signal analyzers, impedance analyzers, and network analyzers.

Candidates are expected to understand the basics of interfacing between hardware and software.

Experience developing and/or testing equipment for space applications.

Familiar with Actual Fusion, Xilinx V5, and arm microprocessor would be an asset.
 
Job Number: 2440
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 06/22/2018
Last Updated: 07/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
54220 | Avionics Engineer - Electrical

Description:
Avionics Engineer - Electrical

12 months contract


Englewood , CO


Job Summary

Creates, verifies, and distributes electrical and avionics engineering work products. These items include (but are not limited to) drawings, electronic models, technical reports, product specifications, test reports, manufacturing specifications. Works collaboratively personally with manufacturing, supply chain, and other associated team members engaged in production and delivery of the designed product. Works closely with government regulators, auditors, and other personnel engaged similarly on military programs. .

Min years of experience: 3—5 year’s previous experience directly related to aircraft electrical / avionics systems preferred. Knowledge and experience in Sikorsky Blackhawk aircraft a preference.
•Understanding of FAA certification processes, aircraft operations, and electrical/communication and navigation systems

Ability to Interpret and use aircraft manufacturer’s maintenance manuals, equipment installation instructions, and wiring diagrams

Degree Requirements: Bachelor’s degree (BS) in Electrical Engineering from four-year college or university; and three to five years’ related experience and/or training; or equivalent combination of education and experience.





Please email resume to tmcilrath@butler.com
 
Job Number: 54220
Job Location: Englewood, CO
Per Diem: pd split possible
Duration: 12 months
Start Date: July
Input Date: 06/08/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Aircraft Electrician / Avionics - interim Secret

Description:
PDS Tech is seeking a Electrician/Avionics Mechanic  for an open position in Jacksonville, FL. 

Ability to efficiently read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. 

Ability to efficiently use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc.

Ability to efficiently assemble, modify, install and perform continuity tests on wire bundles, conductors and other quality electrical components.

Ability to apply knowledge of shop mathematics and electrical and electronic theories to aircraft repairs and troubleshooting of systems and subsystems.

Ability to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.

Ability to operate ground support equipment (GSE) and test equipment as required to perform assigned tasks.
High School Diploma or GED
 
Job Number: 1710079287
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 06/11/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023bFOAAY&URLSource=cjhunter

Aircraft Structure Mechanic (25) - OK

Description:
Chipton-Ross is seeking 25 Aircraft Structure Mechanics for an opening in Tulsa, OK.

RESPONSIBILITIES:
Perform structural assembly and fastener installation of components and assemblies, sealing in confined spaces. Assure quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, structures, components and controls.


-Perform a variety of fastener installation and structural assemble operations. -Apply sealing compounds, mixes, resins, protective coatings and touch-up paint. -Operate automated riveting machines. - Clean tanks and other surfaces by removing oils grease, litter, and other contaminants. -Perform fitting and rework operations. - Make minor adjustments to equipment such as changing sets, punches, shims and dies. -Prepare and maintain necessary documentation and records. -Adhere to all applicable safety and operational procedures and directives. -Assist and instruct other assemblers. -Bring to the attention of supervision all malfunctions, defects and damages of equipment, material and product. -Keep work area clean and orderly. -May be required to perform other duties as required.

REQUIREMENTS:
-Must have a minimum of 5 years' experience in Aircraft Structural Assembly in an Aircraft Manufacturing environment. - Must be able to work accurately from engineering drawings, blueprints, specifications, quality procedures and other written and oral work instructions. -Must be able to use hand tools, power tools, precision measuring instruments, and basic shop equipment. -Must be able to lift, climb, grasp, hold, stand, bend, and stoop. Preferred candidates will also be able to perform basic administrative skills needed to prepare and maintain documentation, records and specifications and use computers to access electronic work instructions and enter data to document completion of work. Must be willing to work any shift.

EDUCATION:
Equivalent to four (4) years High School plus vocational or similar training, including shop math to interpret and work from engineering drawings, manufacturing specifications and procedures, work orders and verbal instructions.



 
Job Number: 169641
Job Location: Tulsa, OK
Rate: Up to $30.00 DOE
Duration: Until April 2019
Input Date: 04/21/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Assembler A (10) - CA

Description:
Chipton-Ross is seeking10 Assembler A's for openings in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar panels for space applications. Essential Duties and Responsibilities:
- Perform hand soldering, wire harness assembly and component bonding
- Complete administrative functions relating to accurate documentation
- Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and associated tools
- Adheres to established company policies and procedures, paying special attention to safety regulations
- Demonstrated experience using a computer to look up and record information (Excel)
- This position requires the ability to work first or second shift
- Ability to read blueprints, schematics, and work instructions
- Familiar with soldering, wire harness assembly and component bonding
- Reliable, mechanically inclined, detail orientated
- Ability to work in a team atmosphere and displays a positive attitude
- Effective verbal and written communication skills

REQUIRED EXPERIENCE:
- Polymeric Application (NASA-STD-8739.1A)
- Soldering (NASA-STD-8739.3)
- Crimp & Wire Routing (NASA-STD-8739.4)

ADDITIONAL EXPERIENCE:
- Experience in electronics and electro-mechanical assemblies
- Experience in manufacturing assembly related work
- Trade skills training or manufacturing experience
- Familiar with Microsoft Applications
- Familiarity with solar cell and solar panel manufacturing processes
- Experience reading detailed assembly drawings and understanding the basics of geometrical dimensioning and tolerance (GDT)
- Knowledge of Lean Mfg. ISO9001 and AS9100 concepts and practices.

EDUCATION:
High school diploma or GED, technical school.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

WORK ENVIRONMENT:
- Work overtime as required
- Must be able to lift a minimum of 35 lbs.
- Must wear a smock, hair cover, and gloves during work
- Excellent manual dexterity to manipulate and move parts and hand tools needed for performing the job
- Requires accurate visual acuity
 
Job Number: 168264
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 01/30/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment and exhibit high levels of all Honeywell behaviors. 

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810086823
Job Location: Northford, CT
Duration: 6 months
Input Date: 05/24/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mVflAAE&URLSource=cjhunter

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 12/11/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023UFLAA2&URLSource=cjhunter

Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 07/20/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Installer

Description:
Unique Skills:

Electrical background, computer skills and knowledge of Aviation


Education and Experience Requirements:

High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.
 
Job Number: 21
Job Location: Savannah, GA
Rate: 25.81
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 850 CHESTER PIKE
City, State: PROSPECT PARK, PA 19076
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

Avionics Installer Sr.

Description:
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions: 1. Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. 2. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 3. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways 4. Assists Engineering in resolving problems and makes repairs per engineering direction. 5. Maintains required logs and records. 6. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 7. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 8. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. 

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Coordinate shift changes in team leaders absence. 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 4. Assists and fills in for team coordinator as required. 5. Performs other duties as assigned. 
PDS Tech searching for a qualified Avionics Installer Sr. in Savannah, GA
Education & Experience Requirements:
 High School diploma/GED. Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams.

Other Requirements: 1. Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. 2. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. 3. Strong written and verbal skills required. 4. Computer keyboard skills necessary.
 
Job Number: 1810086977
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/31/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mW9aAAE&URLSource=cjhunter

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Elec Tech 2

Description:
Unique Skills:

N/A


Education and Experience Requirements:

High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Position Purpose:

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
 
Job Number: 22
Job Location: Savannah, GA
Rate: 28.90
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 850 CHESTER PIKE
City, State: PROSPECT PARK, PA 19076
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Tech

Description:
One of our best clients is seeking an Avionics Technician with 4 years of experience for a long term contract in Dallas, TX. Your expertise in the avionics/electrical field make you the ideal candidate for this position. Click the job title above to find out more about this position and why it could be the perfect match for your next career move.

The ideal candidate for this position will perform the following tasks:
*Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
*Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. *Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
*Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring
*Performs and complies with engineering changes and modifications as required.
*Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
*Complies with the company FOD program, tool control program, 5-S program and all safety regulations.

Mandatory Qualifications and Experience:
*High School graduate/GED.
*4 years experience in an avionics/electrical career field; or 2 years of accredited schooling in aviation electronics and 2 years related experience.

Desired Qualifications and Experience:
*A & P license, FCC license or NCATT certification preferred.

The ideal candidate for this position will possess the following skills and characteristics:
*Ability to read and interpret basic blueprints and schematic diagrams.
*Excellent communication skills.
*Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
*Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127859
Job Location: Dallas, TX
Start Date: 07/02/2018
Input Date: 06/12/2018
Last Updated: 06/18/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GTS Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Biomedical Technician I - NJ

Description:
Chipton Ross is seeking a Biomedical Technician in Moorestown, NJ.

Job Summary:
Perform repairs, inspections, and functional testing to ensure medical devices conform to manufacturer's specifications.

Responsibilities:
-Perform preventative maintenance of medical devices in accordance with manufacturer's requirements.
-Document all service work (hardcopy and electronic).

Requirements:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.
-Minimum 2-3 years of experience testing, troubleshooting, and repairing electronic devices, medical devices preferred.
-Competent with the use of computers and Microsoft Office applications (Word, Excel, Outlook).
-Must be able to work with minimum supervision, follow written test procedures, and complete service reports.
-Must be able to work with hand tools and simple test equipment like multimeters.
-Must be able to lift up to 25 lbs and stand or sit for long periods of time.

Education:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.

Schedule:
-First shift (M-F, 8am-5pm), overtime available during evenings and weekends.

 
Job Number: 169718
Job Location: Moorestown, NJ
Rate: $25.74 to $26.65 DOE
Duration: 2 months
Input Date: 03/26/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Biomedical Technician I - NY

Description:
Chipton Ross is seeking a Biomedical Technician in Westchester, NY.

Job Summary:
Perform repairs, inspections, and functional testing to ensure medical devices conform to manufacturer's specifications.

Responsibilities:
-Perform preventative maintenance of medical devices in accordance with manufacturer's requirements.
-Document all service work (hardcopy and electronic).

Requirements:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.
-Minimum 2-3 years of experience testing, troubleshooting, and repairing electronic devices, medical devices preferred.
-Competent with the use of computers and Microsoft Office applications (Word, Excel, Outlook).
-Must be able to work with minimum supervision, follow written test procedures, and complete service reports.
-Must be able to work with hand tools and simple test equipment like multimeters.
-Must be able to lift up to 25 lbs and stand or sit for long periods of time.

Education:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.

Schedule:
-First shift (M-F, 8am-5pm), overtime available during evenings and weekends.

 
Job Number: 169787
Job Location: Westchester, NY
Rate: $25.74 to $26.65 DOE
Duration: 4 months
Input Date: 03/29/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Cabeling Designer

Description:
We are looking for an Electrical Designers that will be responsible for leading the electrical design process of related components and systems from concept to production in order to achieve the product objectives within a specified time.

RESPONSIBILITIES:
1. Establishes a reasonable project development schedule from concept to production implementation in line with overall business requirements.
2. Supports all design related component styling, purchasing and manufacturing issues with emphasis on quality, reliability, timely delivery, and cost.
3. Determines ideal electrical component placement and manufacturing route to ensure overall design, performance, and cost conformance.
4. Determines nature and type of electronic models, detail drawings, and analysis required to support the above and supervises their release through the release cycle.
5. Prepares preliminary sketches and/or schematic diagrams and/or presentations to aid in the understanding and solution of engineering problems.
6. Participates in design reviews on projects to ensure adequate input and involvement from all interested groups.
7. Performs other miscellaneous project related assignments.

Requirements:
1. 5 years minimum related design experience
2. Required - extensive experience with Pro-Engineer (Creo 2.0 or 3.0)
3. Desired - extensive experience with Pro/Cabling
4. Desired – extensive experience with Routed System Designer (RSD) & Creo Schematics 2.0 or 3.0
5. Superior technical knowledge as demonstrated by academic experience and broad practical experience in design.
6. Excellent verbal and written communication skills.
7. Demonstrated ability to lead major process change in a way that enhances overall corporate performance.
8. High level of people skills, able to work in a team environment.
9. Ability to work with domestic and international technology partners.
10. Direct and coordinate contract design team.
11. Microsoft software including Excel, Project, Word, Outlook and PowerPoint
 
Job Number: AG
Job Location: Wyoming, MN
Rate: 45
Per Diem: C2D
Overtime: Possible
Duration: 6 months c2D
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Board Designer Level 3

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 9-10 Years

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171109
Job Location: Orlando, FL, FL
Rate: $65.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Circuit Board Designer Level 3 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 3 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171110
Job Location: Orlando, FL
Rate: Up to $65.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Christopher Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Circuit Board Designer Level 3 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 3 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 9-10 Years

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171109
Job Location: Orlando, FL
Rate: Up to $65.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Board Designer Level 4

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171114
Job Location: Orlando, FL
Rate: $105.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Circuit Board Designer Level 4 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171112
Job Location: Orlando, FL
Rate: Up to $85.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Circuit Board Designer Level 4 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171114
Job Location: Orlando, FL
Rate: Up to $85.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Circuit Board Designer Level 4 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171113
Job Location: Orlando, FL
Rate: Up to $85.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Circuit Board Designer Level 4 - FL - C

Description:
Chipton-Ross is seeking a Circuit Board Designer Level 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171111
Job Location: Orlando, FL
Rate: Up to $75.00 DOE
Duration: 12 Months
Input Date: 05/17/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Card Assembly Manufacturing Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Circuit Card Assembly Manufacturing Engineer
(U.S. Citizenship Required*)
Tallahassee, FL
2018-6119

Join our electronics manufacturing team as a mid-level Manufacturing Engineer with at least 7 years of experience in CCA design for manufacture and fabrication. You will need to work well within a team and foster positive working relationships with people from diverse job classifications and backgrounds. You will also need the flexibility to positively impact a wide variety of CCA processes in a fast paced manufacturing environment.

Responsibilities:
• Write electronic work instructions to comply with design requirements
• Perform DFM reviews to include panel/PWB design & apply knowledge of manufacturing design best practices
• Drive efficiency and quality improvements in a high mix/low volume environment
• Select and drive procurement of capital technologies to improve capabilities
• Design/procure SMT solder stencils to support production needs
• Analyze quality trends and implement corrective actions
• Perform failure analysis including root cause determination
• Develop manufacturing controls to handle sensitive CCA materials
• Determine and program appropriate reflow profiles for SMT boards
• Set up and structure manufacturing Bills of Material (Oracle experience preferred)
• Provide technical support to production to ensure that goals are met
• Generate SMT programs for hands on operators to run (Siemens/Siplace experience preferred)
• Program solder paste application/inspection equipment
• AOI program for automated inspection (Yes Tech experience preferred)
• Program selective solder (Juki experience preferred)
• Program x-ray for automated inspection (GE experience preferred)
• Support production team and help to implement process improvements
• All other duties as assigned

Qualifications:
• Proficiency and experience with Valor DFM software is a big plus
• Experience with manufacturing under government contracts is preferred
• Experience in high mix, low volume operations is preferred
• Strong technical knowledge and ability to effectively communicate with all organization levels
• Knowledge of MS Office Suite of products and general computer proficiency is required
• Effective verbal and written communication
• Experience with Lean manufacturing concepts (LSS GB, BB, ETC)
• Be able to obtain a security clearance
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Candidate should possess a Bachelor’s Degree in an Engineering discipline, preferably Manufacturing with a minimum of 7 years’ applicable experience.


Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6119
Job Location: Tallahassee, FL
Rate: Based on experience
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bob Jones
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Configuration Management Analyst

Description:
Configuration Management Analyst

Windsor Locks, CT
1 Year Contract
Pay Rate: $49.79/Hr

1st Shift

Available for US Persons only with skills in Microsoft Word, Access, Excel, PowerPoint. Preferably experienced in DOORS (Dynamic Object Oriented Requirements System).

Responsibilities focus on Engineering Configuration
Management compliant with the requirements of MIL-STD-973, EIA-69 and ISO10007 and drawing requirements of MIL-STD-100 and DOD-D-1000.

Process new drawings, parts lists, specifications, reports for release or record and file. Includes review to ensure the documents have been entered into export tool.

Process red flags, deviations and waivers.

Maintain Engineering Library - filing and archiving.

Work with various IPD Team personnel to develop, finalize, and coordinate engineering changes (drawings, specifications, parts lists) in compliance with Space Systems Windsor Locks engineering procedures and program configuration control plans. This may include scanning, copying, and creating PDF electronic files of documents.

Maintain/create reports for configuration status accounting via engineering database.

Construct engineering parts list in EIS to bridge to JDE (eventually to SAP).

Control Pro/E Model via Creo Windchill or electronic files in Documentum.

Update configuration management metrics and maintenance of CM process visualization board.

Incorporate edits and redlines to Microsoft Word documents and DOORS documents. This includes specifications, procedures, configuration management work instructions, etc., as directed by Configuration Management (CM).

Update CM-controlled Generic Statement of Work (SOW) template and Supplier Data Sheets.

Provide As-Designed reports.

Update standard work.
 
Job Number: 8992
Job Location: Windsor Locks, CT
Rate: 49.79
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Cost Analyst

Description:
PDS TECH INC. is seeking Cost Analyst located in Menlo Park,CA.
 

Summary:
We are looking for a Cost Analyst with knowledge in supply chain, operations, finance and accounting to support the Operations team for timely and accurate review of all aspects of product cost analysis, including material cost, spending and production performance data. The role is expected to support the team in the following functions:



  • Collect cost information from each manufacturing partner, organize them in a systematical way and drive business insight.
  • Analyze the cost information from our manufacturing partners as well as general market information for better cost management strategy.
  • Facilitate potential business transactions including rebate, buy/sell and consignment.
  • Track spending at each partner and other key performance metrics.

Qualification



  • 3 or more years of experience in supply chain management, finance or accounting in consumer electronics industry
  • Solid/ Advanced knowledge of MS office, especially Excel and PowerPoint
  • Experience in Agile or other PLM system is preferred
  • Well organized and attention to detail
  • Excellent communication skills and ability to work with multiple internal teams





  • BS/ BA in Finance, Accounting or Operations

Languages:
English Read Write Speak

Attachments: 


p
p
spacer


p
ppcollapse Skills and Experience
pp
p

Skills:

Required



  • FINANCE
  • MS OFFICE
  • POWERPOINT
  • COST MANAGEMENT
  • OPERATIONS


Additional



  • SUPPLY CHAIN
  • SUPPLY CHAIN MANAGEMENT
  • CONTRACT MANUFACTURING
  • MANUFACTURING OPERATIONS
  • MICROSOFT EXCEL
  • MICROSOFT OFFICE
  • MICROSOFT POWERPOINT
  • OUTSOURCED MANUFACTURING

Languages:English( Speak, Read, Write )
Minimum Degree Required:Bachelor's Degree



 
Job Number: 1810084822
Job Location: Menlo Park, CA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jiji John
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNjaAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design Checker reports to the Engineering Manager the Design Checker is Responsible for checking and verifying engineering drawings and related documents to ensure accuracy, completeness, quality and use of design standards where work is of a complex nature by performing the following duties.

JOB RESPONSIBILITIES

• Verify engineering drawings to best practices and standards.
• Works with engineering personal to resolve discrepancies.
• Redline drawings in electronic format and communicates back to engineering team.
• Must be able to work independently and as a team
• Performs other related tasks as required.

• Must have a solid understanding of Microsoft offices including excel, word, and outlook.
• Must have the ability to read 3D models, drawings, and Bill of Materials
• Must have excellent communication skills
• Associate’s degree (A.A.) or equivalent from two-year college or technical school and 2-5 years of experience or seven plus years related experience and/or training

• Familiarity with NX9
• Familiarity with Teamcenter engineering
• Familiarity with aerospace standards
• Familiarity with Adobe Reader
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Oklahoma City, OK
2018-6154

Join our C-17 Military Airlifter Program as an engineer to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration.

Responsibilities:
• Work with customers to develop and document complex electronic and electrical system requirements.
• Analyze and translate requirements into system, hardware, and software designs and interface specifications.
• Test and validate to ensure system designs meet operational & functional requirements.
• Monitor supplier performance to ensure system integration & compliance with requirements.
• Solve problems concerning and provide other support of fielded hardware & software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
• Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6154
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 6 Months
Input Date: 06/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Gregory Schaal
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
The client Company is seeking engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, Lab Windows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Number: 18-09719
Job Location: Oklahoma City,, OK
Input Date: 06/07/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Huntsville, AL
2018-6086

Responsibilities:
• Work with customers to develop & document complex electronic & electrical system requirements.
• Analyzes & translates requirements into system, hardware & software designs and interface specifications.
• Test & validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration & compliance with requirements.
• Solve problems concerning, and provide other support of, fielded hardware and software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.
• Possible Technical Interchange Meetings once every 6 months.

Qualification:
• Required – Active Secret clearance. Candidates without clearance will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6086
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 05/31/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Everett, WA
Duration: 6 months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-08982
Job Location: Everett,, WA
Input Date: 05/24/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Design and Analysis Engineer 3 (15) - WA

Description:
Chipton-Ross is seeking 15 Design and Analysis Engineer 3's for openings in Everett, WA.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 AM
 
Job Number: 171296
Job Location: Everett, WA
Rate: $DOE
Duration: 6 Months
Input Date: 05/24/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Huntsville, AL
2018-6084

Responsibilities:
• Lead work with customers to develop & document complex electronic and electrical system requirements.
• Lead & coordinate work to analyze & translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test & validate to ensure system designs meet operational & functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provide other support of fielded hardware & software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Minimal travel

Qualification:
• Required – Active Secret clearance. Candidates without this clearance or higher will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6084
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 05/31/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA/ Long Beach, CA
Duration: 6 months

Description:
The client is seeking a design and analysis (level 4) engineer in Avionics Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities:
- Serving as a Cognizant Engineer on projects where supplier to client are designing new / altering existing avionics hardware
- Reviewing supplier technical documentation for adequacy and accuracy
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 664-Electronic Sys Design & Analy

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-09270
Job Location: Huntington Beach,, CA
Input Date: 05/31/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Electrical Systems Design)

Description:
Design and Analysis Engineer 4

Location: Everett, WA
Duration: 3 months

Job Description:
Generic Statement of Work:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work:
777X Air supply, support of Qualification testing (coordination between Client Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07302
Job Location: Everett,, WA
Input Date: 04/30/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital ASIC/FPGA Design and Verification Engineer

Description:
Elect Design and Analysis Engr 3

Location: El Segundo, CA
Duration: 1 year

Job Description:
The Client Company's Electronic Products organization is seeking experienced (level 3) digital ASIC/FPGA design and verification engineers to support multiple product lines based in Los Angeles, CA.

Responsibilities:
- Utilize high-level architectural documentation along with algorithm description and implement DSP functions for functions such as decimation, interpolation, general filtering, up-down conversion, digital beamforming, channelization, and be able to develop mathematical models in SystemVerilog to verify design implementation and develop and run scripts and Makefiles.
- Utilize understanding of system requirements to architect block level design specifications
- Prepare detailed design documentation
- HDL coding, logical equivalency checking, static timing analysis, CDC, linting
- Integration of third-party IP
- Create self-checking and reusable testbenches from scratch
- Develop Functional Coverage Models and Closing Code Coverage

Required Qualifications:
- Minimum of 3 years’ experience in Digital ASIC design and verification
- Experience with ASIC development including architectural definition, and detailed design implementation and functional verification using SystemVerilog
- Experience with design architecture and detailed specification generation


Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
64Y-Microelectronics

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-04660
Job Location: El Segundo,, CA
Input Date: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 07/22/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Digital/FPGA Design Engineer

Description:
PDS TECH INC. is seeking candidate for Digital/FPGA Design Engineer position located in Torrance,CA.


Summary;

  •  
    As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement.
    Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design.
    Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.



Education:
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus

 
Job Number: 1810081292
Job Location: Torrance, CA
Duration: 5 months
Input Date: 02/12/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dku9AAA&URLSource=cjhunter

Digital/FPGA Design Engineer

Description:
PDS TECH INC. is seeking Digital/FPGA Design Engineer position located in Torrance, CA.

Summary:

  • As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment.
  • Includes new design, as well as modification activities that results in significant product enhancement.
  • Activities encompass design, analysis, testing and process development using engineering principles and methods.
  • Technical integrated circuits; and embedded software/firmware design.
  • Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.

Skills:
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus

 
Job Number: 1810081098
Job Location: Torrance, CA
Duration: 6 months
Input Date: 02/08/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkHwAAI&URLSource=cjhunter

Document Control Coordinator - CA

Description:
Chipton-Ross is seeking a Document Control Coordinator located in Fremont, CA

RESPONSIBILITIES:
oFollow SOP's to meet compliance requirements for all document and QA activities.
oProcess changes through the Document change process.
oAdminister and maintain records.
oNumber issuance for validations, lab notebooks, and project files.
oManages the archiving process and inventory listings for on-site and offsite.
oReview document changes and provide effective communications of changes for site awareness and to facilitate training requirements and provide applicable site training.
oUpdate BOMs and Item Masters as needed.
oAdminister and maintain compliant periodic review scheduling and reporting.
oAdminister system updates to the document control system as required.
oCollaborate with departments to ensure QMS compliance and alignment of local SOP's as required with common Business Unit SOP's.
oGenerate weekly reports to trend data for improvements within the Document Management System
oStrategize within Quality and cross-departmentally to assess effectiveness of current document control processes and make recommendations for improvements

Desired Profile:
oScience or related degree.
oDemonstrated troubleshooting and problem-solving techniques.
oProven ability to work under tight deadlines and pressure in a composed manner.
oComfortable communicating with all levels of staff, including executives.
oStrong technical writing skills.
oEffective organization, communication, and team orientation skills.
oExperience in Quality roles (CAPA, NCARs, & Change Control).
oImplementation of an Electronic QMS database.

REQUIRED EXPERIENCE:
oWorking knowledge of US / EU regulations and guidelines, including 21 CFR Parts 820, ISO 13485, IVDD, and audits.
oKnowledge of computer applications and current software (Microsoft Excel, Outlook, Word, Access, and PLM/ERP system).

EDUCATION:
Accredited High School Diploma/GED and equivalent 3 - 5 years' of related experience in fast-paced office manufacturing environment

Accredited Associate's degree from accredited college/university or equivalent experience.

WORK HOURS:
Full-Time

 
Job Number: 167562
Job Location: Fremont, CA
Rate: Up to $16.37 DOE
Duration: 10 MONTHS
Input Date: 05/13/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Mahta Eslami
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: meslami@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter - Level 2

Description:
Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Possible

****MUST be a U.S. Citizen****

Job Description
- Create drawings from Creo Models for industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Involved with start-up activities associated with new product introduction including ordering, tracking, final prove in of tooling, and process development and implementation.
- Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
- Provide technical guidance and support to manufacturing assembly team.
- Apply lean manufacturing techniques to reduce cost and increase yields.
- Investigate root cause of failures/defects and implement corrective action to support continuous improvement.

Skill/Experience/Education
Mandatory:
- CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
- Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
- Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
- Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
- Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds.

Desired:
- Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
- SAP experience
- Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
 
Job Number: 9375
Job Location: Bothell, WA
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Elect Design and Analy Engr 6 - CA - O/M

Description:
Chipton-Ross is seeking an Elect Design and Analyst Engineer 6 located in El Segundo, CA

RESPONSIBILITIES:
The Electronics Products organization in El Segundo, California has an opening for a senior electrical engineer to provide technical leadership in the area of analog and power electronics, primarily for space applications.

Responsibilities
- Technical oversight of power electronics design activity, as well as for hands-on circuit design, modeling, and analysis.
- Analog and power electronics product development, from initial definition of requirements, through conceptual design, detailed design and analysis, through final production and test.

Required Qualifications
- Experience with Power Electronics

Preferred Skills
- Background in analysis for stability, radiation effects, and aging
- Ability to mentoring less-experienced engineers
- Project leadership capability to be used as needed
- Breadth of knowledge to develop next-generation power electronics architectures and technology strategies
- Able to support make/buy decisions and proposals

EDUCATION:
Accredited Bachelor's and 20 or more years' experience, Master's with 18 or more years' experience or PhD with 15 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry

WORK HOURS:
Full-Time/First Shift
8 AM -5 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Travel Required-10%

 
Job Number: 167906
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 MONTHS
Input Date: 01/15/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III & IV - (AL)

Description:
SEVERAL OPENINGS IN THE HUNTSVILLE, AL AREA.

ACTIVE SECRET CLEARANCE REQUIRED TO START.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (Formerly 'Comforce')
 
Job Number: EEAL-Secret
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Design & Analysis Engineer III - (WA)

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

achelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Our Aerospace Client is seeking a engineer on a Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/08/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical / Electronic Systems Design & Analysis Engineer IV - (HB)

Description:
We are seeking a design and analysis (level 4) engineer in Avionics Engineering on a Military Airlifter Program in Long Beach/Huntington Beach, California.

Responsibilities

Serving as a Cognizant Engineer on projects where supplier to Client are designing new / altering existing avionics hardware
Reviewing supplier technical documentation for adequacy and accuracy
Managing hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & field operation issues
Researching new technologies for potential application
Developing solutions to technical problems of safety of flight scope and impact
Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEEngIVHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 05/31/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 05/17/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Lead efforts in designing, building, and testing of electrical systems for military, commercial and industrial electronic applications. The candidate will provide electrical engineering expertise and participate in multi-discipline integrated product team working closely with Program Managers and Systems, Software, Mechanical, Electrical and Manufacturing Engineers.


Working knowledge of OrCAD, PADS, Altium, AutoCAD and Solidwork
Experience with leading the Hardware Development Process, including CM, MRB, SDR and analysis
Hands-on experience with the full product life-cycle from engineering proposal to manufacturing release
Experience with military and commercial standards (MIL-STD-461, MIL-S-901D, IPC-610, FCC/CE)
Familiar with MATLAB, C/C++ and other programming languages.
Familiar with mixed signal schematic and PCB layout techniques
 
Job Number: 42270
Job Location: Waltham, MA
Per Diem: pos
Overtime: pos
Duration: 6 mont +
Start Date: ASAP
Input Date: 05/31/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Candidate will perform electrical design, development, integration and troubleshooting of power, simulated and actual aircraft electrical signals, simulated cockpit electrical panels in Mission Procedures Trainers and lab-based test stands. Candidate will prepare electrical design drawings, assemble, integrate, and test avionics test stand components.

REQUIRED EXPERIENCE:
Knowledge of electrical power, discrete, synchro, analog, and Mil-Std-1553 data interfaces. Experience in electrical design, development, and test of lab-based avionics test stands. Experience with VME-based processor and data interface components.
Circuit board soldering certification. Experience with PC-based hardware and software.
Create and update schematics and mechanical drawing using AutoCAD 4-5 Years
Electronic/Electrical Designs Perform complete simulator electronic/electrical designs. 0-3 Years
Mil-Std-1553 Knowledge of 1553 bus interfaces and implementation. 0-3 Years

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
1st Shift
Part-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171274
Job Location: Palmdale, CA
Rate: $47 to $70.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: Yes
Start Date: Yes
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Electrical Engineer

Description:
JOB SUMMARY
Reporting to the Engineering Manager the Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided
JOB RESPONSIBILITIES
• Electrical Engineer applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience.

• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

Electrical Engineer

Description:
The Electrical Engineer will perform electrical engineering activities in accordance with client work instructions and procedures.  This position is to support work ongoing at the client facility.  This position will work in the following capacity:

Position will support engineering development within the Electrical Engineering group.  The position requires the ability to design, analyze and troubleshoot circuits, read/update schematics, and test circuit card assemblies. A working knowledge of electrical design and schematic capture tools and P-Spice is required.

The Electrical Engineer will perform electrical engineering activities in accordance with work instructions and procedures.  This position is to support work ongoing at the  facility.  This position will work in the following capacity:
  • Support electrical design activities to incorporate additional electrical functionality into existing electronic systems used in precision guided munition electronics.
  • Create the needed artifacts to support the electrical engineering documentation and release; artifacts can be used as evidence to substantiate the execution of processes.

Basic Qualifications
  • Bachelor Degree in Electrical Engineering, and/or equivalent proven experience
  • Critical Thinker & Able to offer Value Added Solutions
  • 6 years or greater in an engineering role
  • Schematic Capture (preferably Mentor Graphics) and P-Spice experience beyond a basic level
  • Proficient with standard electrical lab test equipment
  • Basic knowledge of Matlab, MS Office and MS Visio

 
Additional Qualifications
  • Experience with  engineering tools such as Subversion, requirements documents, and requirements based electrical design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department
  • Familiarity with gun hardened electronics design a plus

Skills:

  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills
  • Strong Computer and Web Navigation skills

 

 
 
Job Number: 1810079814
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 04/25/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eH6AAI&URLSource=cjhunter

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/02/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - GPS Systems

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


General Description:



  • Successful Senior Electrical Engineer candidate will participate in design, development, test and support of Global Positioning System (GPS) receivers and related products for the Ground Navigation market.

  • Emphasis is on ground-based and low dynamic applications for the U.S. DoD and international military customers.

  • Product examples include GPS receivers for handheld and vehicular operation as well as embedded solutions for use in other host communication equipment and ruggedized laptop computers.


 


Experience:



  • Good written and verbal communication skills are essential. It is highly desirable that the candidate has experience in GPS receiver design.

  • A digital design background with some RF experience is preferred.

  • Previous experience with low power, low cost, and high volume electronics applications is also a plus.

  • It is also desirable that the candidate has some project engineering experience as well as managing cost accounts and schedules.


 


Minimum Qualifications:



  • Position requires a Bachelor’s degree in an applicable engineering or science field.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14018
Job Location: Cedar Rapids, IA
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Hardware Circuit Design

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description



  • This position focuses on circuit board designs for digital hardware in communication products.

  • We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering.

  • This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links.

  • Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products.


 


Candidates must have the following skills:



  • Must possess or be eligible for obtaining a U.S. DOD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Circuit board design experience including experience with schematic capture tools

  • Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).


 


Desired Experience/Skills:



  • Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer

  • Knowledge of FPGA, ARM, and DDR memory is highly desired.

  • Knowledge in the area of high speed design practices including signal integrity is also desired.

  • Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13927
Job Location: Cedar Rapids, IA
Rate: 50-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II / ability to obtain secret clearance AZ

Description:
Electrical Engineer II (8107285) - Tucson AZ
0-18 month(s) $50-52HR


Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated)
Architect circuit card assembly-level power schemes.
Utilize power conversion simulation programs like SIMPLIS to model converter design performance.
Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry.
Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
Perform high level thermal analyses of critical power components.
Design power converters to meet a set of requirements, sometimes defining those requirements.
Perform design work within the bounds of a given schedule, and sometimes define the schedule.
Present reviews of technical data to program leadership and technical staff.
Act as a liaison between program and functional management.

Must be a U.S. citizen with the ability to obtain a Department of Defense issued Secret Security Clearance.

•Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience.
•Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits. Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost. Must also have design, analysis, and test experience with any one of the following isolated converter topologies: flyback, half-bridge, full-bridge, push-pull.
•Must have professional experience with performing circuit card assembly-level power architecture trades.
•Must have professional experience using PSPICE (or similar), and other circuit simulation tools.
•Must have professional experience with analysis tools such as MathCAD.
•Must have professional experience with guiding ECAD folks through layout (power focus).
•Must have professional experience with thermal concerns of electronics.
•Must have professional experience with taking, analyzing, and correcting Bode plots.
•Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills.
•Must have strong teaming skills, and good communication skills.
•Must be customer-focused.
 
Job Number: MB-R8107285
Job Location: Tucson, AZ
Rate: 50-52/hr max
Per Diem: no
Duration: 18 months
Input Date: 06/14/2018
Last Updated: 06/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineering Test Specialist

Description:
Notes from the Hiring Manager:

* Testing background with electrical work experiences; ability to read blueprints, engineering drawings
* Networking and circuitry exp with above average computer knowledge (Linux, VMWare, Redhat, etc.)
* Awareness/knowledge of electrical safety and power requirements

Summary:

To perform Configuration and Acceptance Testing of Complex Electronic Systems / Assemblies. Performs a variety of complex technical functions related to the support of manufacturing and engineering activities such as set-up, operation, testing or calibration of systems, circuitry, networking, software, and specialized equipment within a production setting.

Job Description:

> Knowledge of analog and digital symbol identification
> Knowledge of test practices and procedures.
> Personal computer skills required to configure and load SW.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
> LINUX Operating System experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

Knowledge, Skills, And Abilities Required:

> 5+ years of experience with an Associate’s Degree (highly preferred) or technical training in a related field
> Must be a US Citizen (applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information).
> State of the art knowledge of electronics - both digital logic and analog basics.
> Knowledge of Linux, VMWare, Redhat & other software packages used in virtual machines.
> Ability to operate test equipment and build test tooling in fully integrated electronic system.
> Knowledge of test practices and procedures, specifically trouble shooting methodology.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to understand component specifications.
 
Job Number: 028_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 06/06/2018
Last Updated: 07/20/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Email: mludwig@globalams.us
Website: www.globalamericanstaffing.com

Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical System Architecture

Description:
RESPONSIBILITIES:
Initial work is a trade study that involves researching four possible implementations that range from identifying replacement parts due to obsolescence to significant architectural and packaging options. This initial trade study is high level and may translate to immediate follow on work.

REQUIRED EXPERIENCE:
Electrical System architecture
Electrical design experience, especially power electronics (480VAC, 600VDC, 50KW), DCDC, and Motor Drive
Excellent verbal and written communication skills
Can perform cost trade benefit analysis
Can specify high level requirements

DESIRED EXPERIENCE:
Navy Hardware
MIL-STD-1399 section 300
COTS
Digital design
Motor controllers, and motor design

EDUCATION:
Accredited Engineering Degree

WORK HOURS:
9/80, 7 - 4:30pm
Full-Time
 
Job Number: 170973
Job Location: Northhampton, MA
Rate: $45.67 to $55.29
Per Diem: No
Overtime: Yes
Duration: 5 mths.
Start Date: ASAP
Input Date: 05/30/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Technician

Description:
The Technician will support engineering activities in accordance with SIS-VT work instructions and procedures.  This position is to support work ongoing at the SIS-VT facility.  This position will work in the following capacity:
  • Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
  • Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
  • Participate on project teams.
  • Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
  • Structure modifications to programs w/ Labview or other SW packages/programs.
  • Design simple circuits, fixtures, or mechanical parts.
  • Provide technical solutions to engineering.
  • Participate on safety initiatives.

Basic Qualifications
  • Production assembly experience preferred.
  • Must have experience troubleshooting and the ability to interpret schematics.
  • Must have good mechanical and/or electronic (analog and digital) repair capabilities.
  • Must be highly motivated and dedicated to exceeding customer expectations.
  • Associate’s/Technical degree and/or equivalent proven experience.
  • Critical thinker & able to offer Value Added Solutions.
  • 1-5 year’s experience.
  • Proficient with standard electrical lab test equipment.
  • Basic knowledge of MS Office, and preferred experience in Matlab and MS Visio

 
Additional Qualifications
  • Experience working with  requirements documents, and requirements based design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department
  • Familiarity with gun hardened electronics design a plus

 
Skills
  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills


 
 
Job Number: 1810079816
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 04/25/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eHGAAY&URLSource=cjhunter

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (WA)

Description:
Generic Statement of Work: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work: 777X Air supply, support of Qualification testing (coordination between Boeing Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEIVWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 07/31/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000237QZAAY&URLSource=cjhunter

Electronic Design & Analysis Engineer 3

Description:
**Active Secret Clearance Required to Start**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 373353
Job Location: Huntsville, AL
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 07/21/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electronic Design & Analysis Engineers -- Avionics

Description:
Job locations:
Long Beach, Huntington Beach, or El Segundo, CA

ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: California
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Electronic Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Huntsville, AL
2018-6083

Responsibilities:
• Lead analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products.
• Lead development of high-level & detailed designs consistent with requirements & specifications.
• Lead reviews of testing & analysis activity to assure compliance to requirements.
• Identify, track, and status technical performance measures to measure progress and ensure compliance with requirements.
• Lead activities in support of Supplier Management with make/buy recommendations and other technical services.
• Coordinate engineering support throughout the lifecycle of the product.
• Plan research projects to develop concepts for future product designs to meet projected requirements.
• Work under minimal direction.
• Minimal travel

Qualification:
• Required – Active Secret clearance. Candidates without this clearance will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6083
Job Location: Huntsville, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 05/31/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electronic Systems Design & Analysis Engineer 3 - (15 OPENINGS)

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 373347
Job Location: Everett, WA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 07/21/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electronic Systems Design & Analysis Engineers

Description:
ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: Oklahoma City, OK
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronic/Electrical Systems Design Engineers

Description:
Analysis, hardware, software, must have active secret clearance

Paperless hiring
Paperless weekly pay
Direct deposit
Holiday & longevity pay
Customizable benefits
Identity theft protection
401K immediate enrollment
 
Job Location: Midwest
Input Date: 06/08/2018
Firm Name: PDS TECHNICAL SERVICES
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Email: kbrownsher@pdstech.com; mmccarthy@pdstech.com
Website: www.pdstech.com

Electronics Design & Analysis Engineer 6

Description:
** This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. **

The Electronics Products organization in El Segundo, California has an opening for a senior electrical engineer to provide technical leadership in the area of analog and power electronics, primarily for space applications.

Responsibilities
- Technical oversight of power electronics design activity, as well as for hands-on circuit design, modeling, and analysis.
- Analog and power electronics product development, from initial definition of requirements, through conceptual design, detailed design and analysis, through final production and test.
Required Qualifications
- Experience with Power Electronics

Preferred Skills
- Background in analysis for stability, radiation effects, and aging
- Ability to mentoring less-experienced engineers
- Project leadership capability to be used as needed
- Breadth of knowledge to develop next-generation power electronics architectures and technology strategies
- Able to support make/buy decisions and proposals

Bachelor's and 20 or more years' experience, Master's with 18 or more years' experience or PhD with 15 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
 
Job Number: 373075
Job Location: El Segundo, CA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/16/2018
Last Updated: 07/21/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electronics Engineer

Description:
Description:
Analog and digital electronics, PCB, Verilog, FPGA Design Engineer. Designs, develops, tests, or supervises the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.

Mandatory:
Electronic Circuit Design Engineer. Significant experience with FPGA programming, Verilog/RTL, analog and digital design and simulation is required. Excellent communication skills. Requirements flow down preparing and presenting design reviews.

Desired:
Mixed signal circuit design. High speed (>2.5 Gb/sec) digital and RF circuit design. Test engineering experience - hands on with laboratory test equipment. Integrated circuit design. MATLAB, C++, and other programming. Proficient with electronic design and simulation tools.
 
Job Number: 09699
Job Location: Santa Barbara, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 07/20/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: pritam@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Do you have at least 3 years experience installing and testing electrical aircraft and/or avionics systems? If so, apply today to be a part of our client's team in Kentucky!

The ideal candidate for this position will perform the following tasks:
* Repairs, replaces, and rebuilds electrical system wiring, connectors, and components using hand tools, power tools, and applicable test equipment.
* Fabricate harness and electrical assemblies.
* Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to accomplish work.
* Work under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy.

Mandatory Qualifications and Experience:
* Must be proficient in reading and interpreting electrical schematics, engineering drawings and technical manuals.
* Minimum of 3 years experience installing and testing of aircraft electrical / avionics systems.
* Successful completion of a military or civilian equivalent electrical / avionics training course.
* Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
* Experience in repairing, replacing, and rebuilding electrical system wiring, connectors, and components using hand tools, power tools and applicable test equipment.
* Experience in utilizing electrical test equipment such as digital multi-meters and oscilloscopes.
* Must be able to obtain a security clearance.

Desired Qualifications and Experience:
* Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
* Experience soldering.
* Experience with harness fabrication.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127834
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 06/18/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Electronics Technician (2nd Shift)

Description:

PDS Tech, Inc. is seeking an Electronics Technician in Bloomfield, CT.
This is a 2nd shift position (3:00 pm to 11:30 pm)

The ideal candidate will repair PC Boards and Power Supplies within our group.
The individual in this position will perform the following functions:
• Troubleshoot PC Boards at the component level.
• Have the ability to follow documented test procedures and schematics to repair or replace components.
• Solder to IPC610A specifications.
• Have the ability to prep PC Boards and Power supplies prior to troubleshooting and repair.


The candidate should possess 1 to 3 years’ experience with Electronics repair and experience with Analog and Digital circuits.  In addition, the successful candidate must:
• be team oriented with a demonstrated ability to interact effectively with others.
• be able to understand and interpret Sinusoidal wave form signals
• understand Truth Table for Logic Devices.
• have the ability to understand and complete Binary Tables.
• be able to calculate the voltage and current drop in a simple circuit.
• have a firm understanding of overvoltage and current in a circuit.
• Possess a positive attitude.


 
Job Number: 1810085232
Job Location: Bloomfield, CT
Duration: 4 months
Input Date: 04/24/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPXvAAM&URLSource=cjhunter

Electronics Technician - NY

Description:
Chipton Ross is seeking an Electronics Technician in Skaneateles Falls, NY.

Position Overview: As an Electronics Technician, you will provide technical and hands-on support on increasingly complex products. Your strong electronic and analytical skills will allow you to find and resolve product failures to serve our customer quickly and accurately. Your expertise in troubleshooting, testing and correcting malfunctions in electronic devices, and test equipment will aid you in repairing the instruments that are returned to client for service. Using your service experience, you will be asked to help in the development of lean service methods and procedures for the repairing and inspecting of products or assemblies. Your strong communication skills will allow you to train other internal or external service personnel as needed. By establishing regular internal contacts, you will exchange information, resolve issues, solve problems and troubleshoot products, parts or processes. You are a collaborative team player and are capable of receiving initial instructions, Service requirements, and advice from your supervisor or engineers with review upon completion. A crucial aspect of this position will be applying quality improvement and lean practices to all process and assignments while actively participating in a positive manner with functional and cross functional teams.

Responsibilities:
* Test, troubleshoot, and repair Medical Devices, test fixtures and Automated Test Equipment (ATE).
* Identify, isolate and control nonconformance of components or products.
* Record product service data using defined data collection methods.
* Conduct internal communication with internal departments or external customers and vendors to resolve issues.
* May provide technical training assistance for external biomedical staff, customers or vendors as required
* May travel to customer locations to perform assistance when performing service, calibration, or training.

Requirements:
* Hands-on experience, skill set and leadership qualities will determine salary grade.
* Strong troubleshooting, analytical and problem-solving experience and aptitude.
* Work collaboratively across different functions, flexible, self-directed, and task oriented.
* Must be organized and have a keen attention to detail.
* Proficient test equipment or tools such as: Digital Multimeter or Oscilloscope.
* Strong oral and written communication skills are preferred. You may be asked to speak publicly to a small group and on the phone or face to face with our customers.
* Working knowledge of Windows Operating systems (Microsoft Office, Excel and Power Point) is a plus
* Ability to travel to perform on-site service is a plus
* SAP Experience is a beneficial

Education:
* Associate's degree in Electronics, Computer Information/Tech or related discipline

Schedule:
* First shift

 
Job Number: 169985
Job Location: Skaneateles, NY
Rate: $16.62 to $24.28 DOE
Duration: 6 month
Input Date: 04/06/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.

Hours:
3rd Shift
 
Job Number: 169255
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/16/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.
 
Job Number: 169253
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/06/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Engineer Electromechanical - 3

Description:
PDS TECH INC. is seeking Engineer Electromechanical - 3 position located in Redondo Beach, CA.

Summary:



 The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.






Preferred Qualifications:



  • A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
  • Experience with electronic packaging / mechanical design for airborne & space applications
  • Electronics design development and sustaining experience spanning cradle to grave
  • Experience with Enovia PLM software application
  • Proficiency with electrical design, electronics manufacturing processes and qualification activities
  • Familiarity with research and development of advanced packaging technologies
  • Active DoD Secret or Top Secret, and/or SCI clearance


 







Basic Qualifications:



  • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
  • A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
  • Electronic packaging, CAD, or mechanical design experience in an aerospace environment
  • Demonstrated technical skills with experience supporting a multi-disciplined team
  • Experience working with different partners across organizations and programs
  • Proficient in performing tolerance and interference analyses
  • Experience in generating and releasing product detail and assembly drawings
  • Experience with PTC Creo / Intralink software applications



 
Job Number: 1810080882
Job Location: Redondo Beach, CA
Duration: 0 months
Input Date: 01/25/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002djc3AAA&URLSource=cjhunter

Electronic Technician, Level 3 FAA

Description:
PDS Tech is seeking an FAA Electronics Technician - Level 3 for an open position in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • MUST BE ABLE TO READ SCHEMATICS - Read, identify, troubleshoot
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

Please send your resume to mmarquez@pdstech.com today!!!!
As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 4-6 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.

Please send your resume to mmarquez@pdstech.com today!

 
 
Job Number: 1810084817
Job Location: Olathe, KS
Duration: 6 months
Input Date: 04/13/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNiXAAU&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking an FAA Electronics Technician for an open position in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • MUST BE ABLE TO READ SCHEMATICS - Read, identify, troubleshoot
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

Please send your resume to mmarquez@pdstech.com today!!
As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require -6 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.
  • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st OR 2nd shift.

Please send your resume to mmarquez@pdstech.com today!!
 
Job Number: 1810081609
Job Location: Olathe, KS
Duration: 6 months
Input Date: 02/19/2018
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dwfpAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Admin 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Facilities Project Admin 2
(U.S. Citizenship Required*)
North Charleston, SC
2018-6096

Responsibilities:
• With minimal assistance on complex projects, evaluate contractor proposals for fair and reasonable cost.
• Administer contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures.
• With minimal assistance, obtain facilities design and resource commitments for complex projects.
• Develop work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates.
• Coordinate with affected parties such as customer, designers, SHEA, crafts, security, and network infrastructure to create an agreed to implementation plan.
• Assemble & release work package by collecting & integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits.
• Finalized work package will provide documents to implement the project.
• Evaluate requests and meet with customer to define requirements for complex projects.
• Identify acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements.
• Create layouts & conceptual designs.
• With minimal guidance, ensure compliance with company & regulatory standards such as city, county, state, federal.
• Develop options so that facilities modifications are accomplished within project objectives.
• Work with affected parties to define functionality and constructability.
• Support development of conceptual, budgetary, and detailed cost estimates to assist in the business case analysis.
• Negotiate options with customer to select the best solution for customer and company.
• With minimal assistance, on complex projects, ensure completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings.
• Ensure comprehensive closeout & retention of project & contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities.
• With minimal assistance, monitor & coordinate implementation activities on complex projects: relocations, construction, utility shutdowns, budget management, schedule, and project reviews.
• Coordinate support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents.
• Ensure that project implementation meets established quality, cost, schedule targets and regulatory requirements.
• Receive customer requests for complex projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods.
• Validate against acceptance criteria for new requests and acknowledges customer requests.
• With minimal guidance, log requests into work management system in order to document, track, and perform work.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6096
Job Location: North Charleston, SC
Rate: Based on experience
Duration: 12 Months
Input Date: 06/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Facilities Project Admin 3 (13) - WA

Description:
Chipton-Ross is seeking 13 Facilities Project Administrators 3's located in Everett, WA.

RESPONSIBILITIES:
Evaluates for major projects, contractor proposals for fair and reasonable cost. Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Provides guidance to less experienced employees. Obtains facilities design and resources commitments for major projects. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, and permits. Finalized work package will provide documents to implement the project. Provides guidance to less experienced employees. Evaluates requests and meet with customer to define requirements for major projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements. Creates layouts and conceptual designs. Ensures compliance with Client and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Provides guidance to less experienced employees. On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Provides guidance to less experienced employees. On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Provides guidance to less experienced employees. Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Logs requests into work management system in order to document, track, and perform work.

REQUIRED EXPERIENCE:
Maximo - Novice
MS Office - Intermediate

EDUCATION:
Accredited Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

FULL TIME/FIRST SHIFT
WORK HOURS:

 
Job Number: 169311
Job Location: Everett, WA
Rate: $DOE
Duration: 12 Months
Input Date: 03/09/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 09/09/2016
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Engineer - Military Platforms (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14003
Job Location: Richardson, TX
Rate: 75-85
Per Diem: Yes, Split
Overtime: Some
Duration: 16 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Our electronics manufacturing plant is looking for a mid level Manufacturing Engineer with at least 7 years of experience in CCA design for manufacture and fabrication.  Candidates should display the ability to work well within a team environment and foster positive working relationships with people from diverse job classifications and backgrounds.  The candidate should possess the flexibility to positively impact a wide variety of CCA processes in a fast paced manufacturing environment.

Engineering Processes:

Authoring electronic work instructions to comply with design requirements

Performing DFM reviews to include panel/PWB design  and applying knowledge of manufacturing design best practices

Driving efficiency and quality improvements in a high mix/low volume environment

Selecting and driving procurement of capital technologies to improve capabilities

Designing/procuring SMT solder stencils to support production needs

Analyzing quality trends and implementing corrective actions

Performing failure analysis to include root cause determination

Developing manufacturing controls to handle sensitive CCA materials

Determining and program appropriate reflow profiles for SMT boards

Setting up and structuring manufacturing Bills of Material (Oracle experience preferred)

Programming/Daily Processes:

Providing technical support to production to ensure that goals are met

Generating SMT programs for hands on operators to run (Siemens/Siplace experience preferred)

Programming solder paste application/inspection equipment

AOI programming for automated inspection (Yes Tech experience preferred)

Selective solder programming (Juki experience preferred)

Programming x-ray for automated inspection (GE experience preferred)


Other Duties:

Support a production team and help to implement process improvements

All other duties as assigned

Position Requirements Candidate should possess a Bachelors Degree in an Engineering discipline preferably Manufacturing with a minimim of 7 years applicable experience.

Candidate should also possess;

Proficiency and experience with Valor DFM software is a big plus

Experience with manufacturing under government contracts is preferred

Experience in high mix, low volume operations is preferred

Candidates should possess a strong technical knowledge and the ability to effectively communicate with all levels of the organization

Knowledge of the Microsoft Office Suite of products and general computer proficiency is required

Candidates must demonstrate effective verbal and written communication

Experience with Lean manufacturing concepts (LSS GB, BB, ETC)

Be able to obtain a security clearance
 
Job Number: 42343
Job Location: Tallahassee, FL
Rate: Open
Per Diem: Yes
Input Date: 06/04/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Manufacturing Engineer

Description:
Location: Pomona, CA
Duration: 1 year contract
Pay Rate: $25.00/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages low to medium complexity projects around the design and planning of layout for assembly and materials handling.
- Adaptation of low complexity machine or equipment design to factory and production conditions.
- Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Responsible for several components of a project or a complex component of a larger project
- Contributes to their team or department by applying their knowledge of one or more functional areas
- Fully developed professional able to work without direct guidance or direction from others
- Develops and maintains Standard Work processes and procedures necessary for efficient and compliant manufacturing.
- Responsible for providing the manufacturing operators with all the necessary tooling, fixtures and documentation to build the product in the most efficient manner which includes working with the operators to improve the build processes.
- Controls manufacturing documentation including creating and updating BOM’s, routings, build instructions, labor standards and visual aids.
- Provides technical assistance to production operators including trouble shooting products and equipment within the manufacturing environment.
- Applies lean manufacturing principles and identifies opportunities for process improvements. Incorporates lean principles in everyday work including: POU, VSM, One Piece Flow, and 5S.
- Participates in and leads Lean events.
- Drives ACE (Achieving Competitive Excellence) initiatives.
- Interfaces daily with Production Control, Project Engineering, Quality Assurance and additional functional areas to resolve product and process related problems and incorporate design changes into manufacturing.
- Functions as a member of an Integrated Product team on new product introductions.
- Recommends new equipment and processes with the goal of reducing cycle time, labor hours and WIP.
- Manages advanced manufacturing projects.
- Must display excellent teamwork and problem solving skills, and have the ability to drive projects to completion.



Education/Requirements:
- Bachelor's Degree
- At least 4 years of experience in electronic equipment manufacturing.
- Continuous Improvement experience including demonstrated success implementing Lean Manufacturing with visual management techniques.
- Excellent verbal/written communication and presentation skills appropriate for direct interaction with Management & Supplier/Partners.
- Good computer skills in MSOffice applications.
 
Job Number: 9201
Job Location: Pomona, CA
Rate: $25.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 1

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 2
(U.S. Citizenship Required*)
Ridley Park, PA
2018-6158

Responsibilities:
• Manufacturing Planner - Electrical / Electronics
• Develop, implement, and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Assist reviewing supplier data to ensure manufacturing related requirements are met.
• Identify tooling requirements and initiate tooling orders based on manufacturing and engineering requirements.
• Assist in tooling dispositions.
• Investigate and resolve manufacturing related issues of limited scope.
• Assist with producibility assessments for part or product designs.
• Assist providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develop work statements and sequencing of events to support delivery commitments.
• Assist reviewing, maintaining, and monitoring of internal documents.
• Work under general supervision.

Qualification:
• Experience with Bill of Material, manufacturing processes, assembly and integration work instruction.
• Experience with Microsoft Office, Excel and PowerPoint.
• Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM).
• Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6159
Job Location: Ridley Park, PA
Rate: Based on experience
Duration: 6 Months
Input Date: 06/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 1-Electrical/Electronics

Description:
Manufacturing Engineer 1

Location: Ridley Park, PA
Duration: 6 months

Description:
Supports the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) to support the integration of technical solutions across multiple disciplines. Supports the development, identification and implementation of conceptual designs and maintenance of the program architecture for build. Participates in the implementation of manufacturing plans. Investigates technical problems. Participates in the implementation of Lean principles and technologies. Interfaces with IPTs and internal customers to develop products, skills, knowledge and experience.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. Additionally, ABET is the preferred, although not required, accreditation standard.

Skills:
Preferred Qualifications- Experience working with manufacturing process.
Experience with Microsoft Office, Excel and PowerPoint.

Skills:
Category Name Required Level
Software Skills MS Excel No Novice
Software Skills MS PowerPoint No Novice

Skill Code:
66T-Electrical/Electronics
 
Job Number: 18-09741
Job Location: Ridley Park, PA
Per Diem: possible
Overtime: possible
Duration: 6 months
Start Date: 7/2/18
Input Date: 06/07/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Manufacturing Engineer 2 - Electrical/Electronics

Description:
Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.
MS Excel
MS Office
MS PowerPoint
PDM
CATIA V5

Preferred Qualifications- Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Additionally ABET is the preferred, although not required, accreditation standard.

 
Job Number: 373366
Job Location: Ridley Park, PA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 06/07/2018
Last Updated: 07/21/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Manufacturing Engineer II - Electrical / Electronics - (PA)

Description:
Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Additionally ABET is the preferred, although not required, accreditation standard.

Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.
 
Job Number: MFGEpa
Job Location: Ridley Park, PA
Rate: up to $38/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/08/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Planner 2
(U.S. Citizenship Required*)
Ridley Park, PA
2018-6158

Responsibilities:
• Manufacturing Planner - Electrical / Electronics
• Develop, implement, and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Assist reviewing supplier data to ensure manufacturing related requirements are met.
• Identify tooling requirements and initiate tooling orders based on manufacturing and engineering requirements.
• Assist in tooling dispositions.
• Investigate and resolve manufacturing related issues of limited scope.
• Assist with producibility assessments for part or product designs.
• Assist providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
• Develop work statements and sequencing of events to support delivery commitments.
• Assist reviewing, maintaining, and monitoring of internal documents.
• Work under general supervision.

Qualification:
• Experience with Bill of Material, manufacturing processes, assembly and integration work instruction.
• Experience with Microsoft Office, Excel and PowerPoint.
• Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM).
• Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6158
Job Location: Ridley Park, PA
Rate: Based on experience
Duration: 6 Months
Input Date: 06/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Sallye Smith
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 2

Description:
Please share updated resume at ravi@iconma.com

Manufacturing Planner 2

Location: Ridley Park, PA
Duration: 6 months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Assists in reviewing supplier data to ensure manufacturing related requirements are met. Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements. Assists in tooling dispositions. Investigates and resolves manufacturing related issues of limited scope. Assists with producibility assessments for part or product designs. Assists in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops work statements and sequencing of events to support delivery commitments. Assists in the review, maintenance and monitoring of internal documents. Works under general supervision.

Education / Experience:
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Preferred Qualifications
Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.

Skills:
Category Name Required Level
Software Skills MS Excel No Novice
Software Skills MS Office No Novice
Software Skills MS PowerPoint No Novice
Software Skills PDM No Novice

Skill Code:
67B-Electrical/Electronics
 
Job Number: 18-09738
Job Location: Ridley Park,, PA
Input Date: 06/07/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Manufacturing Planner I & II - Electrical/Electronics - (PA)

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Assists in reviewing supplier data to ensure manufacturing related requirements are met. Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements. Assists in tooling dispositions. Investigates and resolves manufacturing related issues of limited scope. Assists with producibility assessments for part or product designs. Assists in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops work statements and sequencing of events to support delivery commitments. Assists in the review, maintenance and monitoring of internal documents. Works under general supervision.

AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.

ACS Group (formerly 'Comforce')
 
Job Number: MFGPpa
Job Location: Ridley Park, PA
Rate: up to $30/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/08/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Material Handler I - WA

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 07/22/2018
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Responsibilities



  • Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable

  • Perform autonomously under the direction of team leaders, program management and engineering management

  • Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach

  • Contribute to schedule creation and ensure schedule commitments are met

  • Create and present program and/or task status presentations to team members and engineering management

  • Create and present clear and concise technical descriptions to engineering leadership and customers

  • Mentor junior engineers and provide guidance to design manufacturing team members

  • Provide input to design and document reviews

  • Spearhead investigations for open ended complex problems

  • Develop detailed hardware requirements based on product theory, system level requirements and customer requirements

  • Complete designs that meet documented hardware requirements

  • Create test procedures to support the testing of products to industry and government standards

  • Review hardware defects and identify systemic root causes and process improvements


 


Basic Qualifications



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering

  • US Citizenship or Permanent Resident (Green Card) required

  • Experience in mechanical engineering design and development

  • Knowledge of engineering materials and processes

  • Experience with structural and thermal management design

  • Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)

  • Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles

  • Strong technical, analytical and problem solving skills

  • Ability to effectively communicate throughout all levels of the organization


 


Additional skills or experience a plus:



  • Packaging of electronic and/or precision optical systems

  • Design of manufacturing, calibration and test support equipment

  • Aluminum fabrication techniques including: machining & investment casting