Job Search Results

91 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:00AM Pacific Time by ContractJobHunter. )

Listings 1 - 91

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
44425-1 - Wire Design & Installation Engineer

Description:
Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Software Experience:

• WIRS
• CaddStation
• AdobePro
• CatiaV5
• Bogart
• ProgeCAD


The Structures Company LLC is an AA/EOE.
 
Job Number: 464
Job Location: Oklahoma City, OK
Rate: $55/Hr. *DOE*
Per Diem: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 05/26/2021
Last Updated: 05/27/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Mechanical Engineer - Hydraulic System Design & Operation

Description:
An Advanced Mechanical Engineer - Hydraulic System Design and Operation job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for design and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. To be considered for this role, you will have a Bachelor's Degree in Mechanical Engineering, or a related specialized area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Mechanical Engineer - Hydraulic System Design and Operation Job duties:

* Fully proficient with solid modeling CAD tools to create mechanical models and drawings.
* Fully proficient with technical standards, manufacturing/fabrication methods, and government/industry standards.
* Experience coordinating with and directing vendor efforts with regards to hydraulics plant and system installation.
* Demonstrated experience designing and operating sophisticated hydraulic systems.
* Experience interfacing with customer and/or prime entities in support of design integration and test.

Qualifications:

* Mastery of complex hydraulic plants and control circuit design, including the role each servo, blocking, displacement, and brake valve, etc. plays in overall system functionality.
* Mastery of hydraulic technical circuit diagrams and schematics.
* Knowledge of design and operation of hydraulic power units.
* Experience in system layout, sizing, and component selection, to include piping, fittings, valves, HPUs, and other components.
* Ability to understand the hydraulic system as part of a larger integrated test system, including interface w/ electrical, command and control, and other mechanical systems.

If you are interested in this Advanced Mechanical Engineer - Hydraulic System Design and Operation position in McLeansville, NC please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 309737
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 02/20/2021
Last Updated: 04/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Analyst- Job Id 45025

Description:
We have an Excellent Contract position for an Engine System Design Engineer to join a leading Company located in Canoga Park, CA, area.

**US Citizenship Required**
** Secret Clearance preferred but not required **

Responsibilities:
Level 3 should have 6 years of applicable experience.
Performs engine system-level design tasks for liquid rocket engines.
Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support, and releasing drawings/models with minimal supervision.
Additional duties may include in-house/vendor fabrication and test support as needed.

Qualifications:
CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Basic Hiring Criteria:
Bachelor of Science in Mechanical Engineering or a related engineering degree is preferable.
 
Job Number: 45025
Job Location: Canoga Park, CA
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 03/27/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Publications – Lead Technical Writer, Arlington, TX

Description:
Technical Publications – Lead Technical Writer
Arlington, TX


• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

JOB SUMMARY:

Administer and coordinate the development of Aerospace technical publications, related data and technical services support. The project is about the creation and revision of the maintenance documentation in S1000D & iSpec2200 standard. The manuals include but not limited to:
• Line Maintenance Manuals
• Fault Isolation Manuals
• Illustrated Parts Catalogues
• Illustrated Tools and Equipment Catalogues
• Engine Manual (EM)
• Engine Illustrated Parts Catalogues (EIPC)
• Component Maintenance Manuals (CMM)
• Component Maintenance Publications (CMP)
• Inspection and Repair Manual (IRM)
• Service Bulletins (SB)
• Service Information Letters (SIL)
• Spare Parts Bulletin (SPB)
The inputs will be Engineering Drawings, Bill of materials (BOMs), Production operation sheets, Technical mark-ups from Engineering, Factory Modification Sheets (FMS), Change Requests, SIL, SBs, TRs, repair procedure and customer specific documents.
The softwares used are R4i S1000D Suite, Adobe Acrobat Professional, Arbortext, Isodraw, NX, Visualizations Mockup and JT2GO.

ESSENTIAL JOB DUTIES:

• Administer and coordinate Technical Publications and Document Control groups consistent with the goals and objectives of the Engineering Department.
• Research and review engineering design drawings, engineering orders, and related technical data defining aeroengine modifications and determine their effect on aeroengine technical manuals and publications such as CMM, IPC etc.
• Write/Author technical content in Simplified Technical English based on the engineering inputs.
• Provide written data in S1000D standards using Client specific CSDB and publishing packages for the above technical manuals and.
• Develop, maintain and manage all document control services performed for the client.
• Provide input and suggestions for the continuous improvement of the various Department procedures, controls, flows and systems, and become familiar with Cyient internal policies and procedures.
• Maintain involvement in day-to-day Cyient operations to ensure that the highest level of technical support is maintained at all times.

Qualifications:
MINIMUM:

• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• Ten (10) years minimum technical publications experience involving aircraft/aeroengine related assignments as a Technical Author, Technical Illustrator or Editor.
• Must possess comprehensive knowledge of technical publications development practices, business environment, the S1000D standards and aircraft technical manuals such as MM, IPC, etc.
• Must have comprehensive knowledge of personal computer systems with Microsoft Office, xml/sgml editors and S1000D platforms.
• Must have excellent oral, written and organizational skills that are easily applied to administration and supervision.
• Must be able to read, write and understand English.
• Must have the ability to supervise, organize and motivate technical and clerical employees.

Preferred:

• Strong hands-on experience in developing illustrations for Aircraft CMM, AMM, SRM and Service bulletins
• Exposure to Aero Engines, Aero systems & Avionics systems is preferred
• Familiar and on-hands experience in various Technical publications tools – IsoDraw,
• Familiar with CAD Tools (NX, Catia, etc) and importing product data to generate illustrations
• Sound knowledge of Techpub standards like S1000D, ATA 100, iSpec 2200, ASD-STE 100 and Simplified Technical English.
• Ability to work in environment using Common Source Data Base (CSDB) and tools like R4i CSDB.
• Ability to create intelligent graphics and companion files as per S1000D standards.
• Awareness of various OEM business rules of Airbus and Boeing etc. while working on S1000D projects
• Responsible for the on time delivery and quality of the projects
• Good oral and writing skills, Ability to read and interpret engineering drawings

Skills & Experience
Technical author, Technical Illustrator, Technical Lead, Technical Publications, Technical Writer
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
• Apply

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/Technical-Publications---Lead-Technical-Writer_JR-020867
 
Job Number: JR-020867
Job Location: Arlington, TX
Input Date: 04/09/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Publications –Technical Writer, Arlington, TX

Description:
Aerospace Technical Publications –Technical Writer, Arlington, TX

JR-020866



• Cyient is a global engineering and technology solutions company. As a Design, Build, and Maintain partner for leading organizations worldwide, we take solution ownership across the value chain to help clients focus on their core, innovate, and stay ahead of the curve. We leverage digital technologies, advanced analytics capabilities, and our domain knowledge and technical expertise, to solve complex business problems.
With over 15,000 employees globally, we partner with clients to operate as part of their extended team in ways that best suit their organization’s culture and requirements. Our industry focus includes aerospace and defence, healthcare, telecommunications, rail transportation, semiconductor, geospatial, industrial, and energy.

Job Description

JOB SUMMARY:

Administer and coordinate the development of Aerospace technical publications, related data and technical services support. The project is about the creation and revision of the maintenance documentation in S1000D & iSpec2200 standard. The manuals include but not limited to:
• Line Maintenance Manuals
• Fault Isolation Manuals
• Illustrated Parts Catalogues
• Illustrated Tools and Equipment Catalogues
• Engine Manual (EM)
• Engine Illustrated Parts Catalogues (EIPC)
• Component Maintenance Manuals (CMM)
• Component Maintenance Publications (CMP)
• Inspection and Repair Manual (IRM)
• Service Bulletins (SB)
• Service Information Letters (SIL)
• Spare Parts Bulletin (SPB)
The inputs will be Engineering Drawings, Bill of materials (BOMs), Production operation sheets, Technical mark-ups from Engineering, Factory Modification Sheets (FMS), Change Requests, SIL, SBs, TRs, repair procedure and customer specific documents.
The softwares used are R4i S1000D Suite, Adobe Acrobat Professional, Arbortext, Isodraw, NX, Visualizations Mockup and JT2GO.

ESSENTIAL JOB DUTIES:
• Administer and coordinate Technical Publications and Document Control groups consistent with the goals and objectives of the Engineering Department.
• Research and review engineering design drawings, engineering orders, and related technical data defining aeroengine modifications and determine their effect on aeroengine technical manuals and publications such as CMM, IPC etc.
• Write/Author technical content in Simplified Technical English based on the engineering inputs.
• Provide written data in S1000D standards using Client specific CSDB and publishing packages for the above technical manuals and.
• Develop, maintain and manage all document control services performed for the client.
• Provide input and suggestions for the continuous improvement of the various Department procedures, controls, flows and systems, and become familiar with Cyient internal policies and procedures.
• Maintain involvement in day-to-day Cyient operations to ensure that the highest level of technical support is maintained at all times.

Qualifications:

MINIMUM:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. 'US Person' includes US Citizen, lawful permanent resident, refugee, or asylee.
• Five (5) years minimum technical publications experience involving aircraft/aeroengine related assignments as a Technical Author, Technical Illustrator or Editor.
• Must possess comprehensive knowledge of technical publications development practices, business environment, the S1000D standards and aircraft technical manuals such as MM, IPC, etc.
• Must have comprehensive knowledge of personal computer systems with Microsoft Office, xml/sgml editors and S1000D platforms. Must have excellent oral, written and organizational skills that are easily applied to administration and supervision.
• Must be able to read, write and understand English.
• Must have the ability to supervise, organize and motivate technical and clerical employees.

Preferred:
• Strong hands-on experience in developing illustrations for Aircraft CMM, AMM, SRM and Service bulletins
• Exposure to Aero Engines, Aero systems & Avionics systems is preferred Familiar and on-hands experience in various Technical publications tools – IsoDraw,
• Familiar with CAD Tools (NX, Catia, etc) and importing product data to generate illustrations
• Sound knowledge of Techpub standards like S1000D, ATA 100, iSpec 2200, ASD-STE 100 and Simplified Technical English.
• Ability to work in environment using Common Source Data Base (CSDB) and tools like R4i CSDB.
• Ability to create intelligent graphics and companion files as per S1000D standards.
• Awareness of various OEM business rules of Airbus and Boeing etc. while working on S1000D projects
• Responsible for the on time delivery and quality of the projects
• Good oral and writing skills, Ability to read and interpret engineering drawings

Skills & Experience
Technical author, Technical Illustrator, Technical Publications
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
• Apply


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/Technical-Publications--Technical-Writer_JR-020866
 
Job Number: JR-020866
Job Location: Arlington, TX
Input Date: 04/21/2021
Firm Name: CYIENT
Attention: Elizabeth
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Prefer a person with either a BS in Mechanical Engineering or Aerospace Engineering.
This position is located in Muskegon, MI.
-Primary job function is to create CAD models and drawings of CPS product components, Assemblies, and Fixtures to support Product & Manufacturing Engineering.
-Create, Modify and Maintain designs in Pro-Engineer Creo 2 and other CAD tools
- Must have a good deal of experience in Pro-Engineer Creo 2 design (Creo 4, Preferred), CAD and Windmill.
-Develop/support transmission, engine, and power pack control systems design concepts
-Develop mechanical/electromechanical/pneumatic control systems designs.
-Prepare new designs consistent with planned analysis tools
-Support engine, transmission and power pack control system components procurement, assembly / test, and production
-Write engineering change notices, participate in Material Release Board, process Engineering Change Proposals, follow engineering drawing and specification revisions, work in an Integrated Product Team environment.
-Assist with development of design/performance specifications for internal departments and suppliers
-Support engine, transmission, power pack and propulsion system related proposals (internal and external RFQ’s)
-Integrate engine, transmission, power pack and subsystems (controls and electrical) into military vehicles.
-Recommend, plan and implement component or system product improvements
-Coordinate design models and development programs with functional departments and integrated product teams (Quality, Logistics, Manufacturing, Customer).
-Present design models and supporting analyses to the company’s Combat Propulsion System and customer representatives, and close-out questions on the design.

Requirements

Minimum 10 years related experience with automotive component and /or systems design.
BS in Mechanical Engineering or Aerospace Engineering preferred; will consider experience in lieu of degree.
Must be qualified using Pro-Engineer Creo 2 design and associated modeling tools. Casting knowledge required.
Must possess a strong working knowledge of GD&T, MBE/MBD, Fundamental drafting practices and import/export of CAD data.
Proficient in Microsoft Office Software (WORD, EXCEL, PowerPoint, etc.)
Ability to work well with suppliers, customers, and Government representatives.
Excellent written and verbal communications skills
Must be willing to travel (domestic suppliers and vendors).
Previously held security clearance preferred. Ability to get security clearance required
Must be able to move freely, with or without reasonable accommodation, throughout the manufacturing environment.
 
Job Number: 19916
Job Location: Muskegon, MI
Rate: $35.00 - $45.00
Per Diem: No
Overtime: Possible
Duration: 6 Months - May Be Extended
Start Date: ASAP
Input Date: 03/30/2021
Last Updated: 04/16/2021
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer (Pro/E Creo)

Description:
Hours: 7:30 AM - 5:00 PM M-F

Primary job function is to create CAD models and drawings of CPS product components, Assemblies, and Fixtures to support Product & Manufacturing Engineering.
-Create, Modify and Maintain designs in Pro-Engineer Creo 2 and other CAD tools
-Develop/support transmission, engine, and power pack control systems design concepts
-Develop mechanical/electromechanical/pneumatic control systems designs.
-Prepare new designs consistent with planned analysis tools
-Support engine, transmission and power pack control system components procurement, assembly / test, and production
-Write engineering change notices, participate in Material Release Board, process Engineering Change Proposals, follow engineering drawing and specification revisions, work in an Integrated Product Team environment.
-Assist with development of design/performance specifications for internal departments and suppliers
-Support engine, transmission, power pack and propulsion system related proposals (internal and external RFQ’s)
-Integrate engine, transmission, power pack and subsystems (controls and electrical) into military vehicles.
-Recommend, plan and implement component or system product improvements
-Coordinate design models and development programs with functional departments and integrated product teams (Quality, Logistics, Manufacturing, Customer).
-Present design models and supporting analyses to L-3 CPS and customer representatives, and close-out questions on the design.



Education:

BS in Mechanical Engineering or Aerospace Engineering preferred; will consider experience in lieu of degree.



Requirements:
Minimum 10 years related experience with automotive component and /or systems design.

Experience using Pro-Engineer Creo 2 design and associated modeling tools. Casting knowledge required.
Must possess a strong working knowledge of GD&T, MBE/MBD, Fundamental drafting practices and import/export of CAD data.
Proficient in Microsoft Office Software (WORD, EXCEL, PowerPoint, etc.)
Ability to work well with suppliers, customers, and Government representatives.
Excellent written and verbal communications skills
Must be willing to travel (domestic suppliers and vendors).
Must be able to move freely, with or without reasonable accommodation, throughout the manufacturing environment.
Previously held DOD security clearance preferred and/or the ability to obtain a clearance.
40-45/hour DOE

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 60752
Job Location: Muskegon, MI
Rate: 40-45/hour DOE
Per Diem: possible
Overtime: possible
Duration: 6 months
Start Date: April 2021
Input Date: 03/30/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition Designer – Huntsville, AL

Description:
CREO Product Definition Designer – Huntsville, AL

Contract for 6 months to start

Overview
** Candidates must be U.S. Citizens without Dual Citizenship **

Typical responsibilities include:
Prepare product definition (CAD models and drawings).
Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
Knowledge of Mechanical Aerospace hardware required.
Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
ASME Certification in GD&T is a plus.
Ability to read and interpret product definition and related specifications.

Education:
Requires a Bachelor's degree in an appropriate discipline and at least 10 years of related experience or an equivalent combination of education.

Certifications & Licenses:
ASME Certification in GD&T is a plus

Required Skills:
CREO / WINDCHILL / CAD
Design Control
Geometric Dimensioning and Tolerancing
Aerospace experience
Database Management
 
Job Location: Huntsville, AL
Rate: 60hr
Per Diem: split
Overtime: possible
Duration: 6 mos +
Start Date: asap
Input Date: 04/01/2021
Firm Name: NESC STAFFING
Attention: Jacob Arenstein
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Design Engineer

Description:
Creo Design Engineer
Location: Seattle, WA. Other locations in CA and FL are available. This will start as a remote position.
Hourly Rate: $55.00 - $75.00
Duration: 6 months, possible extension
Benefits: Per Diem available, overtime possible, medical, dental, 401K

Required Education and Experience:
• Bachelors’ degree in an engineering field or equivalent field. MS is desired.
• 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using ProE/Creo CAD systems.
• Candidates must have significant modeling and drafting experience with Creo CAD software.
• Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidates resume.
• Windchill experience strongly preferred.
• Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred.

Responsibilities:
• Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
• Design of mechanical hardware that supports developing and testing new products.
• Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
• Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
• Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
 
Job Number: 55446
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 03/26/2021
Last Updated: 04/12/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Design Engineer - 20+ openings - various levels of exp

Description:
-Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.



-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.



-Applies theories of heat and energy transfer to create practical solutions to technical problems



-Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.



-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
 
Job Number: 3/27/2021
Job Location: WA/CA/AL
Rate: 40-75/hr
Per Diem: Yes
Duration: 6-12 Months
Input Date: 03/28/2021
Firm Name: SRI TECHNOLOGIES
Attention: Ryan Nedolast
Address: 1250 BANK DR
City, State: SCHAUMBURG, IL 60173
Phone: 847/330-1222
Website: www.sritalent.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition Designer - Level 3

Description:
Inconen is looking for a Creo Product Definition Designer – Level 3 for our client, a well known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **

Duties:
Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
-Knowledge of Mechanical Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 10 years of related experience or an equivalent combination of education.
 
Job Number: 15052
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 06/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
EXPLEO USA is currently looking for a Design Engineer to join our team for an exciting new long term opportunity.

Pay Rate: Competitive
Benefits: Competitive benefits such as Health/Medical, PTO, Holidays, 401k, Life Insurance and more.
Location: Wichita, KS
Travel: Travel to supplier sites will be required at project kick off and on a periodic basis

Expleo is a trusted partner for end-to-end, integrated engineering, production support, MRO and quality services, with a presence in over 30 countries. To find out more, visit www.expleogroup.com

Job Description:
Responsible for creation of 3D models for cast and machined parts for major components on Rail projects. Using 2D source data, the initial task will be to create the 3D model in SolidWorks before submitting to the approval team. In support of the project, you will also be required to engage in design reviews with suppliers and multifunctional teams to ensure the design is in line with process and manufacturing requirements.

Required Skills:
• Experienced Mechanical Designer with strong analytical capabilities
• Excellent communication skills to be able to manage requirements and workloads with project leads and suppliers
• Minimum 8+ years of experience designing mechanical components
• Minimum 5+ years of experience using SolidWorks with a high level of proficiency
• Experience in Castings and Machined parts
• Candidate should possess knowledge and skills in Mechanical Design and be able to resolve and develop feasible solutions using previous experience
• Candidate must be a self-starter, motivated and works with minimal guidance
• Proven track record of development of innovative solutions, problem solving and be proactive
• Ability to work effectively in a team environment

Preferred Skills:
• Working knowledge of GD&T, ISO Fit and descriptive geometry
• Knowledge with other PDM System or other CAD software is an advantage
• Knowledge and understanding of design for manufacturing
• Excellent skills with Microsoft Office software
 
Job Location: WICHITA, KS
Rate: Competitive
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: 04/12/21
Input Date: 03/24/2021
Firm Name: EXPLEO USA INC
Attention: Will Hague
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Inconen is looking for a Design Engineer – Level 4 in for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **
** Candidates should have really strong GD&T (Geometric Dimensioning and Tolerancing) experience. Please provide summaries of candidates GD&T experience on their resumes **
** Candidates must have significant experience with Creo. Windchill experience strongly preferred.**
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **
** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Duties: Design Engineer
- Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
-Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
-Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
-Applies theories of heat and energy transfer to create practical solutions to technical problems
-Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Winchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 12620
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 Mos
Start Date: ASAP
Input Date: 05/04/2021
Last Updated: 05/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer Level V- Job Id 44745

Description:
We have an Excellent Contract position for a Design Engineer to join a leading Company located in the Jupiter, FL area.

** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. Please have your FSO confirm **
Please click on this link if you have any questions on how to obtain a clearance:
https://www.tadpgs.com/obtain_security_clearence

Job Responsibilities:
Onsite & remote support performing typical duties of a Mechanical Design Engineer.
Create Marked Prints, write DSMs, Analysis, Drawing reviews and approvals, presentations at design reviews, CAD Modeling of components and assemblies.
Must be able to create or modify designs of liquid rocket propulsion hardware
Responsible for designing, developing, and testing products including providing project time and cost estimate, product manufacturing, and evaluation of the product for quality safety and cost.
Applies research to the planning design, development, and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators, and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
The majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using the Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications, and procedures.

Basic Hiring Criteria:
BS degree in an Engineering field or equivalent field. MS degree is desired.
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience is strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support the fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of the project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
 
Job Number: 44745
Job Location: Jupiter, FL
Rate: 78
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 03/27/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Inconen is looking for a Design Engineer – Level 3 for our client, a well-known Aerospace Company, in Redmond, WA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have GD&T (Geometric Dimensioning & Tolerancing) and Creo CAD software experience. Windchill experience preferred **
** 6 years minimum of related experience as a Mechanical Design Engineer, with 6 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Responsible for designing and developing of in-space propulsion products
-Applies research to the planning, design, and development of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Responsible for design modeling and coordination with other disciplines including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies for design optimization.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent.
-MS degree is desired.
-6+ years of related experience required.
 
Job Number: 15055
Job Location: Redmond, WA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 Mos
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer – Level 4

Description:
Inconen is looking for a Design Engineer – Level 4 in for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret Clearance not required but preferred **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using ProE/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 15053
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 03/25/2021
Last Updated: 04/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Inconen is looking for a Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Redmond, WA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have GD&T (Geometric Dimensioning & Tolerancing) and Creo CAD software experience. Windchill experience preferred **
** 10 years minimum of related experience as a Mechanical Design Engineer, with 10 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Responsible for designing and developing of in-space propulsion products
-Applies research to the planning, design, and development of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Responsible for design modeling and coordination with other disciplines including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies for design optimization.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience preferred.
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent.
-MS degree is desired.
-10+ years of related experience required.
 
Job Number: 15056
Job Location: Redmond, WA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 Mos
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer- Job ID 45130

Description:
We have an Excellent Contract position for a Design Engineer to join a leading Company located in the Canoga Park, CA area.

**US Citizenship Required**

Responsibilities:
Must be able to create or modify designs of liquid bi-propellant rocket propulsion hardware operating at high temperatures & pressures and in corrosive environments.
Responsible for designing and developing in-space propulsion products.
Applies research to the planning, design, and development of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
Responsible for design modeling and coordination with other disciplines, including analysis, manufacturing engineering, quality engineering, materials & process engineering, project engineering, etc.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements.
Conduct trade studies for design optimization.

Qualifications:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Windchill experience preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Basic Hiring Criteria:
BS degree in an Engineering field or equivalent. MS degree is desired.
6 years minimum of related experience as a Mechanical Design Engineer, with 6 years minimum of related experience using ProE/Creo CAD systems. Experience with rocket propulsion design preferred
 
Job Number: 45130
Job Location: Canoga Park, CA
Rate: 50
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 03/29/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 3

Description:
Inconen is looking for an Engine System Design Engineer – Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-6+ years of related experience.
 
Job Number: 15049
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/13/2021
Last Updated: 05/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer - Level 4

Description:
Inconen is looking for an Engine System Design Engineer – Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** An Active Secret Clearance is highly preferred, but not required **

Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
-10+ years of related experience.
 
Job Number: 15039
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/10/2021
Last Updated: 05/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer- Job ID 45026

Description:
We have an Excellent Contract position for an Engine System Design Engineer to join a leading Company located in Canoga Park, CA, area.

**US Citizenship Required**
** Secret clearance preferred but not required **

Responsibilities:
Performs engine system-level design tasks for liquid rocket engines.
Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support, and releasing drawings/models with minimal supervision.
Additional duties may include in-house/vendor fabrication and test support as needed.

Qualifications:
CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
Knowledge of geometric tolerancing & dimensioning, machining, and fabrication processes.

Basic Hiring Criteria:
Bachelor of Science in Mechanical Engineering or a related engineering degree is preferable.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 45026
Job Location: Canoga Park, CA
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 03/27/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer- Job ID 45035

Description:
We have an outstanding Contract position for an Engine System Design Engineer to join a leading Company located in Canoga Park, CA, surrounding area.

**US Citizenship Required**
** Secret Clearance preferred but not required **

Responsibilities:
Level 3 should have 6 years of applicable experience.
Performs engine system-level design tasks for liquid rocket engines.
Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO5 3D CAD software, coordinating analysis support, and releasing drawings/models with minimal supervision.
Additional duties may include in-house/vendor fabrication and test support as needed.

Qualifications:
CREO5 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Basic Hiring Criteria:
Bachelor of Science in Mechanical Engineering or a related engineering degree is preferable.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 45035
Job Location: Canoga Park, CA
Rate: 55
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 03/28/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician job in Louisville, Colorado is currently available through Belcan with one of our Aerospace clients. You will be responsible to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You will also be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components
meet established specifications. To be considered for this role, you will need an Associate's Degree in a related field of study and at least 4 years of relevant experience. This is a great opportunity with a growing company.

Engineering Technician III Job duties:

* Ability to read and understand mechanical and electrical drawings, diagrams, schematics
and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand
tools, and power tools
* Comfortable working in confined spaces
* Experience in fabrication work to include metal, aluminum, composite, & plastics
* Has working knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Competency in the use of basic measuring tools (calipers, micrometers, height gages)
* Computer literacy in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions

Qualifications:
* Associate's Degree in a related field of study and at least 4 years of relevant experience.
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software
* The ability to obtain and maintain a Security Clearance may be required

If you are interested in this Engineering Technician III job in Louisville, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 310524
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/16/2021
Last Updated: 06/09/2021
Firm Name: BELCAN TECHSERVICES
Attention: IsabellaLardieri
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Second Shift)

Description:
Manufacturing Design Engineer (Second Shift)

The position will be responsible for design and development of tooling and fixture design utilizing 3D CAD (SolidWorks & Creo) to be utilized to provide continue improvement of manufacturing processes related to 5-axis machined parts, welding and fabrication, and assembly. The candidate will provide technical expertise within a team to develop and implement those processes that meet engineering requirements for complex aerospace and defense hardware, both prototypes and production, in a variety of materials including Inconel, Titanium, Aluminum, and composites. This position will be required to take ownership of the manufacturing processing for programs from conception to completion.

Responsibilities include but are not limited to:

Proficient with 3D CAD/CAM software to include modeling, ASSY, BOM drawing creation.
Creates detailed work instructions, mfg. sketches and other shop floor documentation.
Work with CNC programmers, machinist & welders to develop process flow to develop work packages.
Provide shop-floor support, as necessary.
Continuously improve production processes by implementing Lean initiatives.
Assist in the developing project set-up and changeover procedures.
Reviews preliminary product designs, assists in making recommendations to reduce cost and improve manufacturability and qualify on new or existing parts
Desired Qualifications:

BS Degree and 5 Years of experience in manufacturing and machining environment (Preference to Aerospace or Defense related roles)
Significant 3D design and modeling experience utilizing SolidWorks & Creo
CAM experience utilizing SurfCam or CATiA CAM
Vericut Simulation experience a plus
Tooling & Fixture Design experience utilizing GD&T and MIL STDS
Candidates must possess or be able to obtain and a “Secret Clearance” via required background checks. Position is in North Alabama, area.
 
Job Number: 9577
Job Location: Huntsville, AL
Input Date: 03/24/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Andrew Hall
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Structures planning and manufacturing modeling experience preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 15089
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 05/10/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Drafter (Solidworks)

Description:
TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.



Our client in the Butler County area is currently for a SolidWorks Drafter. This individual should possess the ability to create new drawings and revise existing drawings using SolidWorks and other AutoCad programs. The ideal person may have a unique mix of fab shop experience and professional drafting experience.



Responsibilities:

Create detailed fabrication drawings and erection drawings using SolidWorks or AutoCAD

Complete projects from conception to final completion independently

Be familiar with structural concepts and practices, drafting standards, symbols, and engineering terms.

Develop, prepare, and maintain complete Bills of Materials for each product being manufactured, including job specific BOM’s for custom products.

Suggest changes in design, materials, method of manufacture and assembly, and drafting techniques to improve product quality, cost, and performance.

Work with other departments to ensure drawings convey the correct information and for problem resolution and continuous improvement.



Qualifications:

1-3 years of experience in CAD design required. (steel service center experience preferable)

Familiarity with reverse engineering and the associated measuring tools preferred.

Experience with 3D scanning technology and Geomagic Design X software is a plus.



Education:

Assoiate degree in Computer Aided Drafting or related field required.
 
Job Number: 9769
Job Location: Butler County, PA
Input Date: 03/24/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Drema Davis
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDE Engineer Aerospace

Description:
Responsible for development, validation and implementation of inspection applications including eddy current, ultrasonic, thermal, visual (BSI) and other advanced concepts. Applications include production and aftermarket requirements with focus on owning implementation tasks. Additional responsibility include sensors and fixtures fabrication in cooperation with qualified suppliers and adherence to POD practices.


Education:
BS in mechanical, electrical engineering or physics as a minimum
Requirements:
NDE, measurement / instrumentation, data acquisition and analysis
CAD Skills
7+ years experience
 
Job Number: 56621
Job Location: Glen Burnie, MD
Rate: $50-$60/hr
Duration: 1 year
Start Date: asap
Input Date: 04/02/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jim Pyle
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Digital Hardware Engineer

Description:
A Senior Digital Hardware Engineer role located in Chandler, AZ is currently available through Belcan. The Senior Digital Hardware Engineer product design and manufacturing technologies and families include but are not limited to:
Up/Down Converters Hybrid Microelectronics
Switch Filter/Amplifier Assemblies Surface Mount Technologies
Sources & Synthesizers Integrated Multichip Modules & Assemblies
Transceivers Monolithic/Hybrid/Discrete Components
Receiver Exciters Analog/Digital Control Electronics

The Engineer's role involves full life-cycle product development from system concept and requirements through design, production, and verification, working in integrated product teams spanning RF Design Engineering, Manufacturing, and Program Management.

Senior Digital Hardware Engineer duties:

* Hardware and firmware development and verification for PIC/microcontrollers and FPGAs
* Design, develop and test digital subsystems using CPLDs, FPGAs and or discrete logic
* Schematic capture and board layout using PADS
* Design complex multi-layer mixed signal digital control boards
* Use of basic test equipment for analysis and debugging of analog and digital circuits including
oscilloscopes, logic analyzers, power supplies, and function-generators (familiarity with signal
synthesizers, spectrum analyzers and other RF equipment desired)
* Data bus I2C, SPI, RS422, RS232, UART
* Conversion of customer requirements to required hardware and firmware design
* Hands on resolution of technical problems during test and integration
* Generate and review technical product documentation, ICD's and presentation documentation for
customer design reviews
* Work effectively with all functional groups to achieve product performance and cost targets.
* Build quality and manufacturability into the design. Define/understand/comply with company and
regulatory guidelines to assure a safe operating environment
* Understand, decompose, and define product and process requirements to support product
development, sustaining and R&D
* Generate and review product development documentation including proposals, technical reports,
procedures, correspondence, etc. necessary to satisfy customer and program requirements.
* Self-directed and motivated while working and communicating effectively within a team
environment that consists of RF design engineering, operations, quality, and business disciplines
* Design test equipment hardware and software, select and procure equipment necessary to
obtain desired results and accuracy, integrate and/or build automated test systems of low or
medium complexity
* Design, code and debug computer/data acquisition systems necessary for
automated testing.

EDUCATION AND EXPERIENCE REQUIRED:

* Education/Certification: BA or BS Degree in an engineering discipline. Masters or PhD preferred.
* Experience: min of 5-10 years of relevant work experience
* Experience programming using C in an embedded environment a plus
* Experience in PADS a plus
* Experience with Xilinx Spartan 7, Xilinx Zynq-7000, and LabVIEW a plus
* Experience with Automated test system design, and programming of data acquisition systems a
plus
* LabVIEW, TestStand, or similar system-design platforms. SPICE, CADs, Schematic Design and
Layout
* Expertise in digital component design and analysis, modeling and simulation, layout and circuit
level design and test
* Product development experience with meeting customer schedules is needed

If you are interested in this Senior Digital Hardware Engineer role located in Chandler, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 308716
Job Location: Chandler, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/22/2021
Last Updated: 04/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Engineer

Description:
A Senior Mechanical Engineer job in McLeansville, NC is currently available through Belcan. In this role, you will be designing and developing in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of mechanical and/or electromechanical systems, instruments, controls, engines and/or machines. Basically, you'll test your skill and knowledge each and every day by working with the best of the best to complete projects on time and on budget. To be considered for this role, you will have Bachelor's degree in Mechanical Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 2 years of relevant experience; or Master's degree.

Qualifications:

* A Bachelor's degree in mechanical engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 2 years of relevant experience; or Master's degree
* Solid proficiency with solid modeling CAD tools to create mechanical models and drawings
* Solid knowledge with technical standards, manufacturing/fabrication methods, and government/industry standards
* Ability to lead team in the preparation of project design, testing and prototype fabrication

If you are interested in this Senior Mechanical Engineer job in McLeansville, NC, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


 
Job Number: 310433
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 03/12/2021
Last Updated: 04/09/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Scrum Master

Description:
Job Title: Senior Scrum Master
Location: Anaheim, CA (92805)
Job ID #: 60799
Duration: 1 Year Contract / 12 Month Contract Position
Work Status: USA Citizen (No Dual Citizenship)
Work Hours: 1st Shift / Day Time Hours / Monday To Friday / 40 Hours Per Week
Pay Rate: $70.00 Per Hour
Secret Security Clearance: Ability to Obtain
Job Details: This position will be in Engineering and will focus on maturing Agile practices within software engineering by applying industry best practices for Agile/Scrum/Kanban that will optimizes software development. This position will play an important role in facilitating the teams to deliver high quality code. Candidate is expected to subscribe to the Agile philosophies to guide transformation in the workplace.
Major Functions:
• Coach and mentor team to apply Scrum and Kanban practices
• Must understand “Servant Leadership” and aim to be a servant leader. Will act as a bridge between various engineering and Scrum teams to enhance collaboration to complete sprints on time
• Will be the impediment remover for development team so that software development team can be more productive
• Maintains agile/scrum principles and helps team adhere to that without the distraction of project management principles
• Conducts all scrum ceremonies per existing cadence
• Weekly KPI report out of all the scrum team’s development work
• Develop, enhance and document agile/scrum and Kanban techniques as applicable to software development team
• Support the technical leads and software management with the changes to workflows, demand management of custom fields, coordinate the needs of SW development team with DevOps Team
• Support the role out and implementation of the additions to JIRA as software department mature in Agile
• Develop and maintain user training documents, agile best practices, and best practices
Technical / Functional Skills / Education / Experience / Licenses etc.:
• Bachelor’s Degree with a minimum 7 years of Agile/Scrum Master experience
• Agile Experience software development and infrastructure teams
• Certificate in SAFe® SSM or CSM.
Required Technical Skills:
• At least 6 years of experience with exercising Agile methodology, Scrum and Kanban
• Bachelor’s degree in Engineering
• Experience running scrum ceremonies for software development and infrastructure teams
• Must have experience as a power user in Atlassian tools - JIRA & Confluence
• Must have experience with generating. Monitoring and reporting KPI/Agile metrics using JIRA
• Must have excellent collaboration and communication skills
• Excellent facilitation skills
• Needs to be detail oriented and skilled problem solver
Preferred Additional Skills:
• Prior software development background or exposure a plus
• Ability to resolve conflicts collaboratively. Must be able to facilitate discussions & alternative approaches
• Must be a team player, must have a collaborative approach and possess excellent problem-solving skill
• Understand fundamentals of software development processes and procedures
• Ability to quickly respond and resolve occasional work-stoppage level situations
Required:
• Must be a U. S. Citizen (no dual citizenship)
• Must be able to work on site
• Ability to obtain and maintain or currently possess SECRET security clearance. Recently active SECRET clearance within 24 months is preferred.
 
Job Number: 60799
Job Location: Anaheim, CA
Rate: $70.00 / Hr.
Per Diem: Yes
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 04/06/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Jason D. Taussig
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Solidworks Mechanical Engineer

Description:
TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skill sets of our candidates to our clients engineering specific requirements.

TriMech is currently seeking to hire several Mechanical Designers who have strong SolidWorks CAD modeling experience.

Job Requirements:

SolidWorks 3D Modeling (Mid to Advanced User) 2016 or newer
Experienced Sheet Metal Design
Familiar with design tables or multiple configurations
Experience working in a PDM environment
Performing ECO's and Model/Drawing Changes
Key Words;

Solidworks, PDM, Sheet Metal, CAD Modeling, Design Tables, Design Configurations, ECO, Change Orders, Drawings
 
Job Number: 9631
Job Location: Memphis, TN
Input Date: 05/19/2021
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4991 LAKE BROOK DR
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Drafter

Description:
A Sr. Drafter role located in Oxnard, CA is currently available through Belcan. The Sr. Drafter will apply scientific principles to design, structure development, machines, tools, systems or manufacturing processes. Predicts operation and economics of items under specific operating conditions.

Sr. Drafter duties:

* Creates and modifies detailed drawings using CAD hardware and software from sketches,
layouts or notes provided by engineering.
* Completes details of major layout drawings prepared by others in accordance with standard
engineering drafting practices.
* Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA.
* Incumbent works from data such as previous drawings, layouts, detailed sketches, notes, verbal
instructions, and standard references directed by engineers.
* Contributes design modifications to facilitate manufacturing operation or quality of product.
* Checks drawing plots versus the project input for correctness and conformance to standards.
* Works with engineers regarding model accuracy, design, drafting standards and ECN/ECR
documentation.
* May work with system management including file maintenance, backup and storage.
* Final drawings must display completeness, clarity, and accuracy.

EDUCATION AND EXPERIENCE REQUIRED:

* 5 years of experience in the RF industry or equivalent.
* Experience using Solidworks.
* AutoCAD.
* Autodesk Inventor is a plus.
* Experience in Microsoft Excel, PowerPoint, Word etc.

If you are interested in this Sr. Drafter role located in Oxnard, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 310161
Job Location: Oxnard, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 03/09/2021
Last Updated: 06/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer (Harness CAD) - R0012417

Description:
Must-haves:

Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

Demonstrated knowledge of engineering principles and practices

Experience with Computer Aided Engineering tools

Progressive experience working in multi-disciplinary design and development teams

Preferred:

CAD (NX, Catia)

Exposure to simulations through functional and logical models and system analysis

Background in the Aerospace and Defense Industry

Experience with wire diagrams and harness drawings

Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)

Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

Experience in digital or analog circuit design and schematic capture

Understanding of the printed circuit board layout process and tools

The ability to obtain and maintain a Security Clearance may be required

The Structures Company is an AA/EOE.
 
Job Number: 450
Job Location: Denver Area, CO
Rate: Up to $65/Hr. **DOE**
Per Diem: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 04/15/2021
Last Updated: 04/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
A Test Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will support component, system and drive testing in a variety of capabilities; Production, R&D and Qualification Testing. You will also be responsible for the functional status, calibration, and readiness of test equipment and instrumentation. To be considered for this role, you will have a B.S. Degree in Engineering along with a minimum of 5+ years' experience in test engineering

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Test Engineer Job Responsibilities:
* Design, modify, or develop test stands, equipment, and test processes for specific projects
* Conduct analytical engineering studies on proposals to develop tests for products
* Plans, schedules, and tests of complex hydraulic and pneumatic control systems and components
* Select the proper equipment and instrumentation, plus lays out test facilities
* Working knowledge of MIL-STD-810 and DO-160
* Develops quotes, selects labs and supervises outside lab testing
* Evaluates engineering test data to determine feasibility of product proposals
* Analyze product or equipment specifications and performance requirements to determine designs that can be produced by existing manufacturing or processing facilities and methods
* Create comprehensive test procedures and prepares detailed test reports
* Work with Design Engineers to ensure appropriate test preparation and execution by identifying in-house resources or sourcing new software, instrumentation, or external test labs
* Develop operating procedures for test equipment
* Assist Design Engineers in executing tests and manage test safety throughout testing
* Install, configure, and calibrate instrumentation used for data recording for drive testing
* Document test setup information for test reports, including conformity/discrepancy records

Test Engineer Job Requirements:
* B.S. in Engineering with 5+ years' experience in test engineering
* Experience developing data acquisition programs in LabVIEW & MATlab, Python, VBA or similar software
* Proven experience in a testing environment operating test equipment
* Experience with SolidWorks or similar CAD software
* Outstanding organization, analytical, and problem-solving skills
* Proven experience conducting development and certification testing of mechanical or electrical hardware
* Familiarity with ASTM, SAE or FMVSS testing and documentation
* Experience operating typical mechanical and electric test equipment - Multimeters, oscilloscopes, soldering stations, load cells, tensile testing machine(s), etc.

If you are interested in this Test Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 308484
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/14/2021
Last Updated: 04/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer & Tool Engineer

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications (Required):
• Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).
 
Job Number: TD_AZ
Job Location: Mesa, AZ
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 04/29/2021
Last Updated: 05/13/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Engineer

Description:
Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements workarounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Basic Qualifications (Required):
• Assembly Process
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.
• Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).
 
Job Number: TE_NC
Job Location: North Charleston, SC
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 03/02/2021
Last Updated: 04/29/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
UG NX vs. 18 or 19 Senior Designers

Description:
Seeking UG NX 18 or 19 Sr. Designers for 6-12 month CONTRACT:

Minimum 9 years of design/drafting experience using UG NX CAD system. RECENT UG NX vs. 18 OR 19 experience mandatory!!
GD&T and MILSPEC/STD's background too!
Email your resume and then call Peggy at 774-210-4108 to discuss!
 
Job Number: PL- NX- PA
Job Location: York, PA
Rate: $51.50 per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2-3 weeks
Input Date: 03/01/2021
Last Updated: 06/08/2021
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Design Engineer II- Job Id 44019

Description:
We have an outstanding Contract position for Wire Harness Design Engineer to join a leading Company located in the Huntington Beach or Cypress CA areas.

Working under limited supervision, Interface with external and internal customers to develop and maintain wire harness detail, installation, and bundle assembly. Create and coordinate solutions for 2D and 3D wire harness installation designs and incorporates changes to design plan. Performs complex design change incorporation as required. Provides functional and technical direction and guidance to support personnel and less experienced engineers.

Job Responsibilities:
Develop and maintain Wire Harness physical design and installation (e.g. 3D wire harness installation models, wire harness assembly models and 2D formboard drawings)
Perform assigned tasks meeting the organization's expectations for quality, schedule and process compliance
Collaborate and coordinate with customer to develop design solutions. Contacts subcontractors and suppliers to exchange technical data and coordinate project execution.
Ensures application of business unit best practices and identifies the need for enhanced processes, methods, and tools
Translates program technical requirements into work requirements, processes, and tasks
Develops solutions to complex problems, which require ingenuity and innovation
Identify and communicate the need for enhanced processes, methods, and tools or new/enhanced design requirements and provides solutions.
Ensure design optimization through commonality, cost, weight, producibility, and maintainability of design.
Communicate and/or implement design solutions
Ensure compliance to design requirements
May confer with more experienced designers and other subject matter experts to interpret design concepts, determine nature and type of required detailed working drawings, and coordinates work with others
Applies knowledge of airplane and component production methods and technologies in the fabrication design of electrical wiring into work requirements, processes, and tasks.
Follows documented processes, specifications and procedures that support the design and manufacturing of wire harness bundles.
Investigates moderately-complex manufacturing process or engineering related issues, and develops solutions to problems
Communicate and facilitate the implementation of 2D and 3D Wire Harness physical design and installation between internal and external customers
Focal for common change process and engineering work statement definition
Monitors and provides status of wire installation activities at airplane leve
Provide Major/Minor determination for change classification as a Design Approval Engineer (DAE)
Regular, predictable attendance is required
Adheres to safe work practices and contributes to the evolution of the health, safety, and environmental program and culture
Other duties may be assigned
Basic Hiring Criteria:
Bachelor's degree in Electrical, Mechanical, or Aerospace Engineering, or equivalent
Minimum 6 years of verifiable experience in an engineering classification
3 years CATIA V5 CAD design experience
5 years Electrical/Mechanical design installation experience
Desired Qualifications:
3 years Aerospace industry (preferred)
#c19#
 
Job Number: 44019
Job Location: Cypress, CA
Rate: $51.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 04/05/2021
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Back to Advanced Job Search